| How to use and build U-Boot on mx6sabreauto | |
| ------------------------------------------- | |
| mx6sabreauto_defconfig target supports mx6q/mx6dl/mx6qp sabreauto variants. | |
| In order to build it: | |
| $ make mx6sabreauto_defconfig | |
| $ make | |
| This will generate the SPL and u-boot.img binaries. | |
| - Flash the SPL binary into the SD card: | |
| $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync | |
| - Flash the u-boot.img binary into the SD card: | |
| $ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync |