| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and |
| * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) |
| * |
| * Modified for the at91rm9200dk board by |
| * (C) Copyright 2004 |
| * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> |
| */ |
| |
| #include <config.h> |
| |
| #if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) |
| |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/at91_mc.h> |
| #include <asm/arch/at91_pmc.h> |
| #include <asm/arch/at91_pio.h> |
| |
| #define ARM920T_CONTROL 0xC0000000 /* @ set bit 31 (iA) and 30 (nF) */ |
| |
| _MTEXT_BASE: |
| #undef START_FROM_MEM |
| #ifdef START_FROM_MEM |
| .word CONFIG_TEXT_BASE-PHYS_FLASH_1 |
| #else |
| .word CONFIG_TEXT_BASE |
| #endif |
| |
| .globl lowlevel_init |
| lowlevel_init: |
| ldr r1, =AT91_ASM_PMC_MOR |
| /* Main oscillator Enable register */ |
| #ifdef CONFIG_SYS_USE_MAIN_OSCILLATOR |
| ldr r0, =0x0000FF01 /* Enable main oscillator */ |
| #else |
| ldr r0, =0x0000FF00 /* Disable main oscillator */ |
| #endif |
| str r0, [r1] /*AT91C_CKGR_MOR] */ |
| /* Add loop to compensate Main Oscillator startup time */ |
| ldr r0, =0x00000010 |
| LoopOsc: |
| subs r0, r0, #1 |
| bhi LoopOsc |
| |
| /* memory control configuration */ |
| /* this isn't very elegant, but what the heck */ |
| ldr r0, =SMRDATA |
| ldr r1, _MTEXT_BASE |
| sub r0, r0, r1 |
| ldr r2, =SMRDATAE |
| sub r2, r2, r1 |
| pllloop: |
| /* the address */ |
| ldr r1, [r0], #4 |
| /* the value */ |
| ldr r3, [r0], #4 |
| str r3, [r1] |
| cmp r2, r0 |
| bne pllloop |
| /* delay - this is all done by guess */ |
| ldr r0, =0x00010000 |
| /* (vs reading PMC_SR for LOCKA, LOCKB ... or MOSCS earlier) */ |
| lock: |
| subs r0, r0, #1 |
| bhi lock |
| ldr r0, =SMRDATA1 |
| ldr r1, _MTEXT_BASE |
| sub r0, r0, r1 |
| ldr r2, =SMRDATA1E |
| sub r2, r2, r1 |
| sdinit: |
| /* the address */ |
| ldr r1, [r0], #4 |
| /* the value */ |
| ldr r3, [r0], #4 |
| str r3, [r1] |
| cmp r2, r0 |
| bne sdinit |
| |
| /* switch from FastBus to Asynchronous clock mode */ |
| mrc p15, 0, r0, c1, c0, 0 |
| orr r0, r0, #ARM920T_CONTROL |
| mcr p15, 0, r0, c1, c0, 0 |
| |
| /* everything is fine now */ |
| mov pc, lr |
| |
| .ltorg |
| |
| SMRDATA: |
| .word AT91_ASM_MC_EBI_CFG |
| .word CONFIG_SYS_EBI_CFGR_VAL |
| .word AT91_ASM_MC_SMC_CSR0 |
| .word CONFIG_SYS_SMC_CSR0_VAL |
| .word AT91_ASM_PMC_PLLAR |
| .word CONFIG_SYS_PLLAR_VAL |
| .word AT91_ASM_PMC_PLLBR |
| .word CONFIG_SYS_PLLBR_VAL |
| .word AT91_ASM_PMC_MCKR |
| .word CONFIG_SYS_MCKR_VAL |
| SMRDATAE: |
| /* here there's a delay */ |
| SMRDATA1: |
| .word AT91_ASM_PIOC_ASR |
| .word CONFIG_SYS_PIOC_ASR_VAL |
| .word AT91_ASM_PIOC_BSR |
| .word CONFIG_SYS_PIOC_BSR_VAL |
| .word AT91_ASM_PIOC_PDR |
| .word CONFIG_SYS_PIOC_PDR_VAL |
| .word AT91_ASM_MC_EBI_CSA |
| .word CONFIG_SYS_EBI_CSA_VAL |
| .word AT91_ASM_MC_SDRAMC_CR |
| .word CONFIG_SYS_SDRC_CR_VAL |
| .word AT91_ASM_MC_SDRAMC_MR |
| .word CONFIG_SYS_SDRC_MR_VAL |
| .word CONFIG_SYS_SDRAM |
| .word CONFIG_SYS_SDRAM_VAL |
| .word AT91_ASM_MC_SDRAMC_MR |
| .word CONFIG_SYS_SDRC_MR_VAL1 |
| .word CONFIG_SYS_SDRAM |
| .word CONFIG_SYS_SDRAM_VAL |
| .word CONFIG_SYS_SDRAM |
| .word CONFIG_SYS_SDRAM_VAL |
| .word CONFIG_SYS_SDRAM |
| .word CONFIG_SYS_SDRAM_VAL |
| .word CONFIG_SYS_SDRAM |
| .word CONFIG_SYS_SDRAM_VAL |
| .word CONFIG_SYS_SDRAM |
| .word CONFIG_SYS_SDRAM_VAL |
| .word CONFIG_SYS_SDRAM |
| .word CONFIG_SYS_SDRAM_VAL |
| .word CONFIG_SYS_SDRAM |
| .word CONFIG_SYS_SDRAM_VAL |
| .word CONFIG_SYS_SDRAM |
| .word CONFIG_SYS_SDRAM_VAL |
| .word AT91_ASM_MC_SDRAMC_MR |
| .word CONFIG_SYS_SDRC_MR_VAL2 |
| .word CONFIG_SYS_SDRAM1 |
| .word CONFIG_SYS_SDRAM_VAL |
| .word AT91_ASM_MC_SDRAMC_TR |
| .word CONFIG_SYS_SDRC_TR_VAL |
| .word CONFIG_SYS_SDRAM |
| .word CONFIG_SYS_SDRAM_VAL |
| .word AT91_ASM_MC_SDRAMC_MR |
| .word CONFIG_SYS_SDRC_MR_VAL3 |
| .word CONFIG_SYS_SDRAM |
| .word CONFIG_SYS_SDRAM_VAL |
| SMRDATA1E: |
| /* SMRDATA1 is 176 bytes long */ |
| #endif /* CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ |