| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2023 PHYTEC Messtechnik GmbH |
| * Author: Teresa Remmet <t.remmet@phytec.de> |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/sys_proto.h> |
| #include <dm/device.h> |
| #include <dm/uclass.h> |
| #include <i2c.h> |
| #include <u-boot/crc.h> |
| |
| #include "imx8m_som_detection.h" |
| |
| extern struct phytec_eeprom_data eeprom_data; |
| |
| #if IS_ENABLED(CONFIG_PHYTEC_IMX8M_SOM_DETECTION) |
| |
| /* Check if the SoM is actually one of the following products: |
| * - i.MX8MM |
| * - i.MX8MN |
| * - i.MX8MP |
| * - i.MX8MQ |
| * |
| * Returns 0 in case it's a known SoM. Otherwise, returns -1. |
| */ |
| int __maybe_unused phytec_imx8m_detect(struct phytec_eeprom_data *data) |
| { |
| char *opt; |
| u8 som; |
| |
| if (!data) |
| data = &eeprom_data; |
| |
| /* We can not do the check for early API revisions */ |
| if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2) |
| return -1; |
| |
| som = data->payload.data.data_api2.som_no; |
| debug("%s: som id: %u\n", __func__, som); |
| |
| opt = phytec_get_opt(data); |
| if (!opt) |
| return -1; |
| |
| if (som == PHYTEC_IMX8MP_SOM && is_imx8mp()) |
| return 0; |
| |
| if (som == PHYTEC_IMX8MM_SOM) { |
| if ((PHYTEC_GET_OPTION(opt[0]) != 0) && |
| (PHYTEC_GET_OPTION(opt[1]) == 0) && is_imx8mm()) |
| return 0; |
| else if ((PHYTEC_GET_OPTION(opt[0]) == 0) && |
| (PHYTEC_GET_OPTION(opt[1]) != 0) && is_imx8mn()) |
| return 0; |
| } |
| |
| if (som == PHYTEC_IMX8MQ_SOM && is_imx8mq()) |
| return 0; |
| |
| pr_err("%s: SoM ID does not match. Wrong EEPROM data?\n", __func__); |
| return -1; |
| } |
| |
| /* |
| * All PHYTEC i.MX8M boards have RAM size definition at the |
| * same location. |
| */ |
| u8 __maybe_unused phytec_get_imx8m_ddr_size(struct phytec_eeprom_data *data) |
| { |
| char *opt; |
| u8 ddr_id; |
| |
| if (!data) |
| data = &eeprom_data; |
| |
| if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2) |
| return PHYTEC_EEPROM_INVAL; |
| |
| opt = phytec_get_opt(data); |
| if (opt) |
| ddr_id = PHYTEC_GET_OPTION(opt[2]); |
| else |
| ddr_id = PHYTEC_EEPROM_INVAL; |
| |
| debug("%s: ddr id: %u\n", __func__, ddr_id); |
| return ddr_id; |
| } |
| |
| /* |
| * Filter SPI-NOR flash information. All i.MX8M boards have this at |
| * the same location. |
| * returns: 0x0 if no SPI is populated. Otherwise a board depended |
| * code for the size. PHYTEC_EEPROM_INVAL when the data is invalid. |
| */ |
| u8 __maybe_unused phytec_get_imx8m_spi(struct phytec_eeprom_data *data) |
| { |
| char *opt; |
| u8 spi; |
| |
| if (!data) |
| data = &eeprom_data; |
| |
| if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2) |
| return PHYTEC_EEPROM_INVAL; |
| |
| opt = phytec_get_opt(data); |
| if (opt) |
| spi = PHYTEC_GET_OPTION(opt[4]); |
| else |
| spi = PHYTEC_EEPROM_INVAL; |
| |
| debug("%s: spi: %u\n", __func__, spi); |
| return spi; |
| } |
| |
| /* |
| * Filter ethernet phy information. All i.MX8M boards have this at |
| * the same location. |
| * returns: 0x0 if no ethernet phy is populated. 0x1 if it is populated. |
| * PHYTEC_EEPROM_INVAL when the data is invalid. |
| */ |
| u8 __maybe_unused phytec_get_imx8m_eth(struct phytec_eeprom_data *data) |
| { |
| char *opt; |
| u8 eth; |
| |
| if (!data) |
| data = &eeprom_data; |
| |
| if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2) |
| return PHYTEC_EEPROM_INVAL; |
| |
| opt = phytec_get_opt(data); |
| if (opt) { |
| eth = PHYTEC_GET_OPTION(opt[5]); |
| eth &= 0x1; |
| } else { |
| eth = PHYTEC_EEPROM_INVAL; |
| } |
| |
| debug("%s: eth: %u\n", __func__, eth); |
| return eth; |
| } |
| |
| /* |
| * Filter RTC information for phyCORE-i.MX8MP. |
| * returns: 0 if no RTC is populated. 1 if it is populated. |
| * PHYTEC_EEPROM_INVAL when the data is invalid. |
| */ |
| u8 __maybe_unused phytec_get_imx8mp_rtc(struct phytec_eeprom_data *data) |
| { |
| char *opt; |
| u8 rtc; |
| |
| if (!data) |
| data = &eeprom_data; |
| |
| if (!data->valid || data->payload.api_rev < PHYTEC_API_REV2) |
| return PHYTEC_EEPROM_INVAL; |
| |
| opt = phytec_get_opt(data); |
| if (opt) { |
| rtc = PHYTEC_GET_OPTION(opt[5]); |
| rtc &= 0x4; |
| rtc = !(rtc >> 2); |
| } else { |
| rtc = PHYTEC_EEPROM_INVAL; |
| } |
| debug("%s: rtc: %u\n", __func__, rtc); |
| return rtc; |
| } |
| |
| #else |
| |
| inline int __maybe_unused phytec_imx8m_detect(struct phytec_eeprom_data *data) |
| { |
| return -1; |
| } |
| |
| inline u8 __maybe_unused |
| phytec_get_imx8m_ddr_size(struct phytec_eeprom_data *data) |
| { |
| return PHYTEC_EEPROM_INVAL; |
| } |
| |
| inline u8 __maybe_unused phytec_get_imx8mp_rtc(struct phytec_eeprom_data *data) |
| { |
| return PHYTEC_EEPROM_INVAL; |
| } |
| |
| inline u8 __maybe_unused phytec_get_imx8m_spi(struct phytec_eeprom_data *data) |
| { |
| return PHYTEC_EEPROM_INVAL; |
| } |
| |
| inline u8 __maybe_unused phytec_get_imx8m_eth(struct phytec_eeprom_data *data) |
| { |
| return PHYTEC_EEPROM_INVAL; |
| } |
| |
| #endif /* IS_ENABLED(CONFIG_PHYTEC_IMX8M_SOM_DETECTION) */ |