| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2016 Keymile AG |
| * Rainer Boschung <rainer.boschung@keymile.com> |
| * |
| */ |
| |
| #ifndef __KMCENT2_H |
| #define __KMCENT2_H |
| |
| #define CONFIG_HOSTNAME "kmcent2" |
| #define KM_BOARD_NAME CONFIG_HOSTNAME |
| |
| /* |
| * The Linux fsl_fman driver needs to be able to process frames with more |
| * than just the VLAN tag (i.e. eDSA tag). It is passed as a kernel boot |
| * parameters |
| */ |
| #define CONFIG_KM_DEF_BOOT_ARGS_CPU "fsl_dpaa_fman.fsl_fm_max_frm=1558" |
| |
| #include "km/keymile-common.h" |
| |
| /* Application IFC chip selects */ |
| #define SYS_LAWAPP_BASE 0xc0000000 |
| #define SYS_LAWAPP_BASE_PHYS (0xf00000000ull | SYS_LAWAPP_BASE) |
| |
| /* Application IFC CS4 MRAM */ |
| #define CONFIG_SYS_MRAM_BASE SYS_LAWAPP_BASE |
| #define SYS_MRAM_BASE_PHYS SYS_LAWAPP_BASE_PHYS |
| #define SYS_MRAM_CSPR_EXT (0x0f) |
| #define SYS_MRAM_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_MRAM_BASE) | \ |
| CSPR_PORT_SIZE_8 | /* 8 bit */ \ |
| CSPR_MSEL_GPCM | /* msel = gpcm */ \ |
| CSPR_V /* bank is valid */) |
| #define SYS_MRAM_AMASK IFC_AMASK(2 * 1024 * 1024) /* 2 MiB */ |
| #define SYS_MRAM_CSOR CSOR_GPCM_TRHZ_40 |
| /* MRAM Timing parameters for IFC CS4 */ |
| #define SYS_MRAM_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ |
| FTIM0_GPCM_TEADC(0x8) | \ |
| FTIM0_GPCM_TEAHC(0x2)) |
| #define SYS_MRAM_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ |
| FTIM1_GPCM_TRAD(0xe)) |
| #define SYS_MRAM_FTIM2 (FTIM2_GPCM_TCS(0x2) | \ |
| FTIM2_GPCM_TCH(0x2) | \ |
| FTIM2_GPCM_TWP(0x8)) |
| #define SYS_MRAM_FTIM3 0x04000000 |
| #define CONFIG_SYS_CSPR4_EXT SYS_MRAM_CSPR_EXT |
| #define CONFIG_SYS_CSPR4 SYS_MRAM_CSPR |
| #define CONFIG_SYS_AMASK4 SYS_MRAM_AMASK |
| #define CONFIG_SYS_CSOR4 SYS_MRAM_CSOR |
| #define CONFIG_SYS_CS4_FTIM0 SYS_MRAM_FTIM0 |
| #define CONFIG_SYS_CS4_FTIM1 SYS_MRAM_FTIM1 |
| #define CONFIG_SYS_CS4_FTIM2 SYS_MRAM_FTIM2 |
| #define CONFIG_SYS_CS4_FTIM3 SYS_MRAM_FTIM3 |
| |
| /* Application IFC CS6: BFTIC */ |
| #define SYS_BFTIC_BASE 0xd0000000 |
| #define SYS_BFTIC_BASE_PHYS (0xf00000000ull | SYS_BFTIC_BASE) |
| #define SYS_BFTIC_CSPR_EXT (0x0f) |
| #define SYS_BFTIC_CSPR (CSPR_PHYS_ADDR(SYS_BFTIC_BASE) | \ |
| CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\ |
| CSPR_MSEL_GPCM | /* MSEL = GPCM */\ |
| CSPR_V) /* valid */ |
| #define SYS_BFTIC_AMASK IFC_AMASK(64 * 1024) /* 64kB */ |
| #define SYS_BFTIC_CSOR CSOR_GPCM_TRHZ_40 |
| /* BFTIC Timing parameters for IFC CS6 */ |
| #define SYS_BFTIC_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ |
| FTIM0_GPCM_TEADC(0x8) | \ |
| FTIM0_GPCM_TEAHC(0x2)) |
| #define SYS_BFTIC_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ |
| FTIM1_GPCM_TRAD(0x12)) |
| #define SYS_BFTIC_FTIM2 (FTIM2_GPCM_TCS(0x3) | \ |
| FTIM2_GPCM_TCH(0x1) | \ |
| FTIM2_GPCM_TWP(0x12)) |
| #define SYS_BFTIC_FTIM3 0x04000000 |
| #define CONFIG_SYS_CSPR6_EXT SYS_BFTIC_CSPR_EXT |
| #define CONFIG_SYS_CSPR6 SYS_BFTIC_CSPR |
| #define CONFIG_SYS_AMASK6 SYS_BFTIC_AMASK |
| #define CONFIG_SYS_CSOR6 SYS_BFTIC_CSOR |
| #define CONFIG_SYS_CS6_FTIM0 SYS_BFTIC_FTIM0 |
| #define CONFIG_SYS_CS6_FTIM1 SYS_BFTIC_FTIM1 |
| #define CONFIG_SYS_CS6_FTIM2 SYS_BFTIC_FTIM2 |
| #define CONFIG_SYS_CS6_FTIM3 SYS_BFTIC_FTIM3 |
| |
| /* Application IFC CS7 PAXE */ |
| #define CONFIG_SYS_PAXE_BASE 0xd8000000 |
| #define SYS_PAXE_BASE_PHYS (0xf00000000ull | CONFIG_SYS_PAXE_BASE) |
| #define SYS_PAXE_CSPR_EXT (0x0f) |
| #define SYS_PAXE_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_PAXE_BASE) | \ |
| CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\ |
| CSPR_MSEL_GPCM | /* MSEL = GPCM */\ |
| CSPR_V) /* valid */ |
| #define SYS_PAXE_AMASK IFC_AMASK(64 * 1024) /* 64kB */ |
| #define SYS_PAXE_CSOR CSOR_GPCM_TRHZ_40 |
| /* PAXE Timing parameters for IFC CS7 */ |
| #define SYS_PAXE_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ |
| FTIM0_GPCM_TEADC(0x8) | \ |
| FTIM0_GPCM_TEAHC(0x2)) |
| #define SYS_PAXE_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ |
| FTIM1_GPCM_TRAD(0x12)) |
| #define SYS_PAXE_FTIM2 (FTIM2_GPCM_TCS(0x3) | \ |
| FTIM2_GPCM_TCH(0x1) | \ |
| FTIM2_GPCM_TWP(0x12)) |
| #define SYS_PAXE_FTIM3 0x04000000 |
| #define CONFIG_SYS_CSPR7_EXT SYS_PAXE_CSPR_EXT |
| #define CONFIG_SYS_CSPR7 SYS_PAXE_CSPR |
| #define CONFIG_SYS_AMASK7 SYS_PAXE_AMASK |
| #define CONFIG_SYS_CSOR7 SYS_PAXE_CSOR |
| #define CONFIG_SYS_CS7_FTIM0 SYS_PAXE_FTIM0 |
| #define CONFIG_SYS_CS7_FTIM1 SYS_PAXE_FTIM1 |
| #define CONFIG_SYS_CS7_FTIM2 SYS_PAXE_FTIM2 |
| #define CONFIG_SYS_CS7_FTIM3 SYS_PAXE_FTIM3 |
| |
| /* PRST */ |
| #define KM_BFTIC4_RST 0 |
| #define KM_DPAXE_RST 1 |
| #define KM_FEMT_RST 3 |
| #define KM_FOAM_RST 4 |
| #define KM_EFE_RST 5 |
| #define KM_ES_PHY_RST 6 |
| #define KM_XES_PHY_RST 7 |
| #define KM_ZL30158_RST 8 |
| #define KM_ZL30364_RST 9 |
| #define KM_BOBCAT_RST 10 |
| #define KM_ETHSW_DDR_RST 12 |
| #define KM_CFE_RST 13 |
| #define KM_PEXSW_RST 14 |
| #define KM_PEXSW_NT_RST 15 |
| |
| /* QRIO GPIOs used for deblocking */ |
| #define KM_I2C_DEBLOCK_PORT QRIO_GPIO_A |
| #define KM_I2C_DEBLOCK_SCL 20 |
| #define KM_I2C_DEBLOCK_SDA 21 |
| |
| /* High Level Configuration Options */ |
| #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ |
| #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ |
| |
| #define CONFIG_RESET_VECTOR_ADDRESS 0xebfffffc |
| |
| #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ |
| #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS |
| #define CONFIG_PCIE1 /* PCIE controller 1 */ |
| #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ |
| |
| /* Environment in parallel NOR-Flash */ |
| #define CONFIG_ENV_TOTAL_SIZE 0x040000 |
| #define ENV_DEL_ADDR 0xebf00000 /*direct for newenv*/ |
| |
| #define CONFIG_SYS_CLK_FREQ 66666666 |
| |
| /* |
| * These can be toggled for performance analysis, otherwise use default. |
| */ |
| #define CONFIG_SYS_CACHE_STASHING |
| #define CONFIG_BACKSIDE_L2_CACHE |
| #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E |
| #define CONFIG_BTB /* toggle branch predition */ |
| |
| #define CONFIG_ENABLE_36BIT_PHYS |
| |
| /* POST memory regions test */ |
| #define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS |
| |
| /* |
| * Config the L3 Cache as L3 SRAM |
| */ |
| #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 |
| #define CONFIG_SYS_L3_SIZE 256 << 10 |
| |
| #define CONFIG_SYS_DCSRBAR 0xf0000000 |
| #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull |
| |
| /* |
| * DDR Setup |
| */ |
| #define CONFIG_VERY_BIG_RAM |
| #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 |
| #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE |
| |
| #define CONFIG_DIMM_SLOTS_PER_CTLR 1 |
| #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) |
| |
| #define CONFIG_SYS_SPD_BUS_NUM 0 |
| #define SPD_EEPROM_ADDRESS 0x54 |
| #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ |
| |
| /****************************************************************************** |
| * (PRAM usage) |
| * ... ------------------------------------------------------- |
| * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM |
| * ... |<------------------- pram -------------------------->| |
| * ... ------------------------------------------------------- |
| * @END_OF_RAM: |
| * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose |
| * @CONFIG_KM_PHRAM: address for /var |
| * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application) |
| * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM |
| */ |
| |
| /* size of rootfs in RAM */ |
| #define CONFIG_KM_ROOTFSSIZE 0x0 |
| /* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable |
| * is not valid yet, which is the case for when u-boot copies itself to RAM |
| */ |
| #define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM) >> 10) |
| |
| /* |
| * IFC Definitions |
| */ |
| /* NOR flash on IFC CS0 */ |
| #define CONFIG_SYS_FLASH_BASE 0xe8000000 |
| #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | \ |
| CONFIG_SYS_FLASH_BASE) |
| |
| #define CONFIG_SYS_NOR_CSPR_EXT (0x0f) |
| #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \ |
| CSPR_PORT_SIZE_16 | /* Port size = 16 bit */\ |
| 0x00000010 | /* drive TE high */\ |
| CSPR_MSEL_NOR | /* MSEL = NOR */\ |
| CSPR_V) /* valid */ |
| #define CONFIG_SYS_NOR_AMASK IFC_AMASK(64 * 1024 * 1024) /* 64MB */ |
| #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_AVD_TGL_PGM_EN | /* AVD toggle */\ |
| CSOR_NOR_TRHZ_20 | \ |
| CSOR_NOR_BCTLD) |
| |
| /* NOR Flash Timing Params */ |
| #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \ |
| FTIM0_NOR_TEADC(0x7) | \ |
| FTIM0_NOR_TEAHC(0x1)) |
| #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \ |
| FTIM1_NOR_TRAD_NOR(0x21) | \ |
| FTIM1_NOR_TSEQRAD_NOR(0x21)) |
| #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCH(0x1) | \ |
| FTIM2_NOR_TCS(0x1) | \ |
| FTIM2_NOR_TWP(0xb) | \ |
| FTIM2_NOR_TWPH(0x6)) |
| #define CONFIG_SYS_NOR_FTIM3 0x0 |
| |
| #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR_CSPR_EXT |
| #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR |
| #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK |
| #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR |
| #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 |
| #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 |
| #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 |
| #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 |
| |
| /* More NOR Flash params */ |
| #define CONFIG_SYS_FLASH_QUIET_TEST |
| |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ |
| |
| #define CONFIG_SYS_FLASH_EMPTY_INFO |
| #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} |
| |
| /* NAND Flash on IFC CS1*/ |
| #define CONFIG_SYS_NAND_BASE 0xfa000000 |
| #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) |
| |
| #define CONFIG_SYS_NAND_CSPR_EXT (0x0f) |
| #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE) | \ |
| CSPR_PORT_SIZE_8 | /* Port Size = 8 bit */\ |
| 0x00000010 | /* drive TE high */\ |
| CSPR_MSEL_NAND | /* MSEL = NAND */\ |
| CSPR_V) /* valid */ |
| #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) /* 64kB */ |
| |
| #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN | /* ECC encoder on */ \ |
| CSOR_NAND_ECC_DEC_EN | /* ECC decoder on */ \ |
| CSOR_NAND_ECC_MODE_4 | /* 4-bit ECC */ \ |
| CSOR_NAND_RAL_3 | /* RAL = 3Bytes */ \ |
| CSOR_NAND_PGS_2K | /* Page size = 2K */ \ |
| CSOR_NAND_SPRZ_128 | /* Spare size = 128 */ \ |
| CSOR_NAND_PB(64) | /* 64 Pages/Block */ \ |
| CSOR_NAND_TRHZ_40 | /**/ \ |
| CSOR_NAND_BCTLD) /**/ |
| |
| /* ONFI NAND Flash mode0 Timing Params */ |
| #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x3) | \ |
| FTIM0_NAND_TWP(0x8) | \ |
| FTIM0_NAND_TWCHT(0x3) | \ |
| FTIM0_NAND_TWH(0x5)) |
| #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1e) | \ |
| FTIM1_NAND_TWBE(0x1e) | \ |
| FTIM1_NAND_TRR(0x6) | \ |
| FTIM1_NAND_TRP(0x8)) |
| #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x9) | \ |
| FTIM2_NAND_TREH(0x5) | \ |
| FTIM2_NAND_TWHRE(0x3c)) |
| #define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x1e)) |
| |
| #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT |
| #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR |
| #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK |
| #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR |
| #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 |
| #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 |
| #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 |
| #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 |
| |
| /* More NAND Flash Params */ |
| #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| |
| /* QRIO on IFC CS2 */ |
| #define CONFIG_SYS_QRIO_BASE 0xfb000000 |
| #define CONFIG_SYS_QRIO_BASE_PHYS (0xf00000000ull | CONFIG_SYS_QRIO_BASE) |
| #define SYS_QRIO_CSPR_EXT (0x0f) |
| #define SYS_QRIO_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE) | \ |
| CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\ |
| 0x00000010 | /* drive TE high */\ |
| CSPR_MSEL_GPCM | /* MSEL = GPCM */\ |
| CSPR_V) /* valid */ |
| #define SYS_QRIO_AMASK IFC_AMASK(64 * 1024) /* 64kB */ |
| #define SYS_QRIO_CSOR (CSOR_GPCM_TRHZ_20 |\ |
| CSOR_GPCM_BCTLD) |
| /* QRIO Timing parameters for IFC CS2 */ |
| #define SYS_QRIO_FTIM0 (FTIM0_GPCM_TACSE(0x2) | \ |
| FTIM0_GPCM_TEADC(0x8) | \ |
| FTIM0_GPCM_TEAHC(0x2)) |
| #define SYS_QRIO_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ |
| FTIM1_GPCM_TRAD(0x6)) |
| #define SYS_QRIO_FTIM2 (FTIM2_GPCM_TCS(0x1) | \ |
| FTIM2_GPCM_TCH(0x1) | \ |
| FTIM2_GPCM_TWP(0x7)) |
| #define SYS_QRIO_FTIM3 0x04000000 |
| #define CONFIG_SYS_CSPR2_EXT SYS_QRIO_CSPR_EXT |
| #define CONFIG_SYS_CSPR2 SYS_QRIO_CSPR |
| #define CONFIG_SYS_AMASK2 SYS_QRIO_AMASK |
| #define CONFIG_SYS_CSOR2 SYS_QRIO_CSOR |
| #define CONFIG_SYS_CS2_FTIM0 SYS_QRIO_FTIM0 |
| #define CONFIG_SYS_CS2_FTIM1 SYS_QRIO_FTIM1 |
| #define CONFIG_SYS_CS2_FTIM2 SYS_QRIO_FTIM2 |
| #define CONFIG_SYS_CS2_FTIM3 SYS_QRIO_FTIM3 |
| |
| #define CONFIG_MISC_INIT_F |
| #define CONFIG_HWCONFIG |
| |
| /* define to use L1 as initial stack */ |
| #define CONFIG_SYS_INIT_RAM_LOCK |
| #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ |
| #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf |
| #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 |
| /* The assembler doesn't like typecast */ |
| #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ |
| ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ |
| CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 |
| |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ |
| GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ |
| #define CONFIG_SYS_MONITOR_LEN 0xc0000 /* 768k */ |
| |
| /* |
| * Serial Port - controlled on board with jumper J8 |
| * open - index 2 |
| * shorted - index 1 |
| * Retain non-DM serial port for debug purposes. |
| */ |
| #if !defined(CONFIG_DM_SERIAL) |
| #define CONFIG_CONS_INDEX 1 |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE 1 |
| #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) |
| #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x11C500) |
| #endif |
| |
| #ifndef __ASSEMBLY__ |
| void set_sda(int state); |
| void set_scl(int state); |
| int get_sda(void); |
| int get_scl(void); |
| #endif |
| |
| /* |
| * General PCI |
| * Memory space is mapped 1-1, but I/O space must start from 0. |
| */ |
| /* controller 1 */ |
| #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 |
| #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull |
| #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 |
| #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull |
| |
| #define CONFIG_SYS_BMAN_NUM_PORTALS 10 |
| #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 |
| #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull |
| #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 |
| #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 |
| #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) |
| #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ |
| CONFIG_SYS_BMAN_CENA_SIZE) |
| #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) |
| #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 |
| #define CONFIG_SYS_QMAN_NUM_PORTALS 10 |
| #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 |
| #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull |
| #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 |
| #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 |
| #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) |
| #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ |
| CONFIG_SYS_QMAN_CENA_SIZE) |
| #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) |
| #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 |
| |
| #define CONFIG_SYS_DPAA_FMAN |
| #define CONFIG_SYS_DPAA_PME |
| |
| #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) |
| |
| /* Qman / Bman */ |
| /* RGMII (FM1@DTESC5) is local managemant interface */ |
| #define CONFIG_SYS_RGMII2_PHY_ADDR 0x11 |
| #define CONFIG_ETHPRIME "fm1-mac5" |
| |
| /* |
| * Hardware Watchdog |
| */ |
| #define CONFIG_WATCHDOG_PRESC 34 /* wdog prescaler 2^(64-34) ~10min */ |
| #define CONFIG_WATCHDOG_RC WRC_CHIP /* reset chip on watchdog event */ |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 64 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ |
| #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ |
| |
| /* |
| * Environment Configuration |
| */ |
| #ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ |
| #define CONFIG_KM_DEF_ENV |
| #endif |
| |
| #define __USB_PHY_TYPE utmi |
| |
| #define CONFIG_KM_DEF_ENV_CPU \ |
| "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ |
| "cramfsloadfdt=" \ |
| "cramfsload ${fdt_addr_r} " \ |
| "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ |
| "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \ |
| "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ |
| " +${filesize} && " \ |
| "erase " __stringify(CONFIG_SYS_MONITOR_BASE) \ |
| " +${filesize} && " \ |
| "cp.b ${load_addr_r} " \ |
| __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && " \ |
| "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ |
| " +${filesize}\0" \ |
| "update-nor=protect off " __stringify(CONFIG_SYS_FLASH_BASE) \ |
| " +${filesize} && " \ |
| "erase " __stringify(CONFIG_SYS_FLASH_BASE) \ |
| " +${filesize} && " \ |
| "cp.b ${load_addr_r} " \ |
| __stringify(CONFIG_SYS_FLASH_BASE) " ${filesize} && " \ |
| "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ |
| " +" __stringify(CONFIG_SYS_MONITOR_LEN) "\0" \ |
| "set_fdthigh=true\0" \ |
| "checkfdt=true\0" \ |
| "fpgacfg=true\0" \ |
| "" |
| |
| #define CONFIG_HW_ENV_SETTINGS \ |
| "hwconfig=fsl_ddr:ctlr_intlv=cacheline\0" \ |
| "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ |
| "usb_dr_mode=host\0" |
| |
| #define CONFIG_KM_NEW_ENV \ |
| "newenv=protect off " __stringify(ENV_DEL_ADDR) \ |
| " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \ |
| "erase " __stringify(ENV_DEL_ADDR) \ |
| " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \ |
| "protect on " __stringify(ENV_DEL_ADDR) \ |
| " +" __stringify(CONFIG_ENV_TOTAL_SIZE) "\0" |
| |
| /* ppc_82xx is the equivalent to ppc_6xx, the generic ppc toolchain */ |
| #ifndef CONFIG_KM_DEF_ARCH |
| #define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" |
| #endif |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| CONFIG_KM_DEF_ENV \ |
| CONFIG_KM_DEF_ARCH \ |
| CONFIG_KM_NEW_ENV \ |
| CONFIG_HW_ENV_SETTINGS \ |
| "EEprom_ivm=pca9547:70:9\0" \ |
| "" |
| |
| #endif /* __KMCENT2_H */ |