| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) Aspeed Technology Inc. |
| */ |
| #include <config.h> |
| #include <dm.h> |
| #include <ram.h> |
| #include <timer.h> |
| #include <asm/io.h> |
| #include <asm/arch/timer.h> |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <dm/uclass.h> |
| #include <asm/arch/scu_ast2600.h> |
| #include <asm/global_data.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* Memory Control registers */ |
| #define MCR_BASE 0x1e6e0000 |
| #define MCR_CONF (MCR_BASE + 0x004) |
| |
| /* bit fields of MCR_CONF */ |
| #define MCR_CONF_ECC_EN BIT(7) |
| #define MCR_CONF_VGA_MEMSZ_MASK GENMASK(3, 2) |
| #define MCR_CONF_VGA_MEMSZ_SHIFT 2 |
| #define MCR_CONF_MEMSZ_MASK GENMASK(1, 0) |
| #define MCR_CONF_MEMSZ_SHIFT 0 |
| |
| int dram_init(void) |
| { |
| int ret; |
| struct udevice *dev; |
| struct ram_info ram; |
| |
| ret = uclass_get_device(UCLASS_RAM, 0, &dev); |
| if (ret) { |
| debug("cannot get DRAM driver\n"); |
| return ret; |
| } |
| |
| ret = ram_get_info(dev, &ram); |
| if (ret) { |
| debug("cannot get DRAM information\n"); |
| return ret; |
| } |
| |
| gd->ram_size = ram.size; |
| return 0; |
| } |
| |
| int board_init(void) |
| { |
| int i = 0, rc; |
| struct udevice *dev; |
| |
| gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100; |
| |
| while (1) { |
| rc = uclass_get_device(UCLASS_MISC, i++, &dev); |
| if (rc) |
| break; |
| } |
| |
| return 0; |
| } |
| |
| void board_add_ram_info(int use_default) |
| { |
| int rc; |
| uint32_t conf; |
| uint32_t ecc, act_size, vga_rsvd; |
| struct udevice *scu_dev; |
| struct ast2600_scu *scu; |
| |
| rc = uclass_get_device_by_driver(UCLASS_CLK, |
| DM_DRIVER_GET(aspeed_ast2600_scu), &scu_dev); |
| if (rc) { |
| debug("%s: cannot find SCU device, rc=%d\n", __func__, rc); |
| return; |
| } |
| |
| scu = devfdt_get_addr_ptr(scu_dev); |
| if (IS_ERR_OR_NULL(scu)) { |
| debug("%s: cannot get SCU address pointer\n", __func__); |
| return; |
| } |
| |
| conf = readl(MCR_CONF); |
| |
| ecc = conf & MCR_CONF_ECC_EN; |
| act_size = 0x100 << ((conf & MCR_CONF_MEMSZ_MASK) >> MCR_CONF_MEMSZ_SHIFT); |
| vga_rsvd = 0x8 << ((conf & MCR_CONF_VGA_MEMSZ_MASK) >> MCR_CONF_VGA_MEMSZ_SHIFT); |
| |
| /* no VGA reservation if efuse VGA disable bit is set */ |
| if (readl(scu->efuse) & SCU_EFUSE_DIS_VGA) |
| vga_rsvd = 0; |
| |
| printf(" (capacity:%d MiB, VGA:%d MiB), ECC %s", act_size, |
| vga_rsvd, (ecc) ? "on" : "off"); |
| } |
| |
| void enable_caches(void) |
| { |
| /* get rid of the warning message */ |
| } |