| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/mux/ti-serdes.h> |
| #include <dt-bindings/phy/phy.h> |
| #include <dt-bindings/net/ti-dp83867.h> |
| #include "k3-am642.dtsi" |
| #include "k3-am64-sk-lp4-1600MTs.dtsi" |
| #include "k3-am64-ddr.dtsi" |
| |
| / { |
| chosen { |
| stdout-path = "serial2:115200n8"; |
| tick-timer = &timer1; |
| }; |
| |
| aliases { |
| remoteproc0 = &sysctrler; |
| remoteproc1 = &a53_0; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| /* 2G RAM */ |
| reg = <0x00000000 0x80000000 0x00000000 0x80000000>; |
| u-boot,dm-spl; |
| }; |
| |
| a53_0: a53@0 { |
| compatible = "ti,am654-rproc"; |
| reg = <0x00 0x00a90000 0x00 0x10>; |
| power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>, |
| <&k3_pds 135 TI_SCI_PD_EXCLUSIVE>; |
| resets = <&k3_reset 135 0>; |
| clocks = <&k3_clks 61 0>; |
| assigned-clocks = <&k3_clks 61 0>, <&k3_clks 135 0>; |
| assigned-clock-parents = <&k3_clks 61 2>; |
| assigned-clock-rates = <200000000>, <1000000000>; |
| ti,sci = <&dmsc>; |
| ti,sci-proc-id = <32>; |
| ti,sci-host-id = <10>; |
| u-boot,dm-spl; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| secure_ddr: optee@9e800000 { |
| reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ |
| alignment = <0x1000>; |
| no-map; |
| }; |
| }; |
| |
| clk_200mhz: dummy-clock-200mhz { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <200000000>; |
| u-boot,dm-spl; |
| }; |
| }; |
| |
| &cbass_main { |
| sysctrler: sysctrler { |
| compatible = "ti,am654-system-controller"; |
| mboxes= <&secure_proxy_main 1>, <&secure_proxy_main 0>; |
| mbox-names = "tx", "rx"; |
| u-boot,dm-spl; |
| }; |
| }; |
| |
| &cbass_main { |
| main_esm: esm@420000 { |
| compatible = "ti,j721e-esm"; |
| reg = <0x0 0x420000 0x0 0x1000>; |
| ti,esm-pins = <160>, <161>; |
| u-boot,dm-spl; |
| }; |
| }; |
| |
| &cbass_mcu { |
| u-boot,dm-spl; |
| mcu_esm: esm@4100000 { |
| compatible = "ti,j721e-esm"; |
| reg = <0x0 0x4100000 0x0 0x1000>; |
| ti,esm-pins = <0>, <1>; |
| u-boot,dm-spl; |
| }; |
| }; |
| |
| &main_pmx0 { |
| u-boot,dm-spl; |
| main_uart0_pins_default: main-uart0-pins-default { |
| u-boot,dm-spl; |
| pinctrl-single,pins = < |
| AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ |
| AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ |
| AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ |
| AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ |
| >; |
| }; |
| |
| main_uart1_pins_default: main-uart1-pins-default { |
| u-boot,dm-spl; |
| pinctrl-single,pins = < |
| AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ |
| AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ |
| AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ |
| AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ |
| >; |
| }; |
| |
| main_mmc1_pins_default: main-mmc1-pins-default { |
| u-boot,dm-spl; |
| pinctrl-single,pins = < |
| AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ |
| AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ |
| AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ |
| AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ |
| AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ |
| AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ |
| AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ |
| AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */ |
| >; |
| }; |
| |
| main_usb0_pins_default: main-usb0-pins-default { |
| u-boot,dm-spl; |
| pinctrl-single,pins = < |
| AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ |
| >; |
| }; |
| |
| mdio1_pins_default: mdio1-pins-default { |
| pinctrl-single,pins = < |
| AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ |
| AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ |
| >; |
| }; |
| |
| rgmii1_pins_default: rgmii1-pins-default { |
| pinctrl-single,pins = < |
| AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */ |
| AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */ |
| AM64X_IOPAD(0x0150, PIN_INPUT, 4) /* (Y13) PRG1_PRU1_GPO18.RGMII1_RD2 */ |
| AM64X_IOPAD(0x0154, PIN_INPUT, 4) /* (V12) PRG1_PRU1_GPO19.RGMII1_RD3 */ |
| AM64X_IOPAD(0x00d8, PIN_INPUT, 4) /* (W13) PRG1_PRU0_GPO8.RGMII1_RXC */ |
| AM64X_IOPAD(0x00cc, PIN_INPUT, 4) /* (V13) PRG1_PRU0_GPO5.RGMII1_RX_CTL */ |
| AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ |
| AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ |
| AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ |
| AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ |
| AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ |
| AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ |
| >; |
| }; |
| |
| rgmii2_pins_default: rgmii2-pins-default { |
| pinctrl-single,pins = < |
| AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ |
| AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ |
| AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */ |
| AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */ |
| AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */ |
| AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */ |
| AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */ |
| AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */ |
| AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */ |
| AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */ |
| AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */ |
| AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ |
| >; |
| }; |
| }; |
| |
| &dmsc { |
| mboxes= <&secure_proxy_main 0>, |
| <&secure_proxy_main 1>, |
| <&secure_proxy_main 0>; |
| mbox-names = "rx", "tx", "notify"; |
| ti,host-id = <35>; |
| ti,secure-host; |
| }; |
| |
| &main_uart0 { |
| /delete-property/ power-domains; |
| /delete-property/ clocks; |
| /delete-property/ clock-names; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_uart0_pins_default>; |
| status = "okay"; |
| }; |
| |
| &main_uart1 { |
| u-boot,dm-spl; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_uart1_pins_default>; |
| }; |
| |
| &sdhci1 { |
| /delete-property/ power-domains; |
| clocks = <&clk_200mhz>; |
| clock-names = "clk_xin"; |
| ti,driver-strength-ohm = <50>; |
| disable-wp; |
| pinctrl-0 = <&main_mmc1_pins_default>; |
| }; |
| |
| &serdes_ln_ctrl { |
| idle-states = <AM64_SERDES0_LANE0_USB>; |
| }; |
| |
| &serdes_wiz0 { |
| status = "okay"; |
| }; |
| |
| &serdes0 { |
| serdes0_usb_link: link@0 { |
| reg = <0>; |
| cdns,num-lanes = <1>; |
| #phy-cells = <0>; |
| cdns,phy-type = <PHY_TYPE_USB3>; |
| resets = <&serdes_wiz0 1>; |
| }; |
| }; |
| |
| &usbss0 { |
| ti,vbus-divider; |
| }; |
| |
| &usb0 { |
| dr_mode = "host"; |
| maximum-speed = "super-speed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&main_usb0_pins_default>; |
| phys = <&serdes0_usb_link>; |
| phy-names = "cdns3,usb3-phy"; |
| }; |
| |
| &cpsw3g { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mdio1_pins_default |
| &rgmii1_pins_default |
| &rgmii2_pins_default>; |
| }; |
| |
| &cpsw_port2 { |
| phy-mode = "rgmii-rxid"; |
| phy-handle = <&cpsw3g_phy1>; |
| }; |
| |
| &cpsw3g_mdio { |
| cpsw3g_phy1: ethernet-phy@1 { |
| reg = <1>; |
| ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| }; |
| }; |
| |
| #include "k3-am642-sk-u-boot.dtsi" |