| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| /* |
| * Copyright (c) 2023, Linaro Ltd |
| * |
| * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. |
| */ |
| |
| #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> |
| #include <dt-bindings/clock/qcom,gcc-qcm2290.h> |
| #include <dt-bindings/clock/qcom,qcm2290-gpucc.h> |
| #include <dt-bindings/clock/qcom,rpmcc.h> |
| #include <dt-bindings/dma/qcom-gpi.h> |
| #include <dt-bindings/firmware/qcom,scm.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interconnect/qcom,qcm2290.h> |
| #include <dt-bindings/interconnect/qcom,rpm-icc.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| chosen { }; |
| |
| clocks { |
| xo_board: xo-board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <32764>; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x0>; |
| clocks = <&cpufreq_hw 0>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| power-domains = <&CPU_PD0>; |
| power-domain-names = "psci"; |
| L2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| }; |
| }; |
| |
| CPU1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x1>; |
| clocks = <&cpufreq_hw 0>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| power-domains = <&CPU_PD1>; |
| power-domain-names = "psci"; |
| }; |
| |
| CPU2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x2>; |
| clocks = <&cpufreq_hw 0>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| power-domains = <&CPU_PD2>; |
| power-domain-names = "psci"; |
| }; |
| |
| CPU3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x3>; |
| clocks = <&cpufreq_hw 0>; |
| capacity-dmips-mhz = <1024>; |
| dynamic-power-coefficient = <100>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| qcom,freq-domain = <&cpufreq_hw 0>; |
| power-domains = <&CPU_PD3>; |
| power-domain-names = "psci"; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| }; |
| |
| domain-idle-states { |
| CLUSTER_SLEEP: cluster-sleep-0 { |
| compatible = "domain-idle-state"; |
| arm,psci-suspend-param = <0x41000043>; |
| entry-latency-us = <800>; |
| exit-latency-us = <2118>; |
| min-residency-us = <7376>; |
| }; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| CPU_SLEEP: cpu-sleep-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "power-collapse"; |
| arm,psci-suspend-param = <0x40000003>; |
| entry-latency-us = <290>; |
| exit-latency-us = <376>; |
| min-residency-us = <1182>; |
| local-timer-stop; |
| }; |
| }; |
| }; |
| |
| firmware { |
| scm: scm { |
| compatible = "qcom,scm-qcm2290", "qcom,scm"; |
| clocks = <&rpmcc RPM_SMD_CE1_CLK>; |
| clock-names = "core"; |
| #reset-cells = <1>; |
| interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; |
| }; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the size */ |
| reg = <0 0x40000000 0 0>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| |
| CPU_PD0: power-domain-cpu0 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&CPU_SLEEP>; |
| }; |
| |
| CPU_PD1: power-domain-cpu1 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&CPU_SLEEP>; |
| }; |
| |
| CPU_PD2: power-domain-cpu2 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&CPU_SLEEP>; |
| }; |
| |
| CPU_PD3: power-domain-cpu3 { |
| #power-domain-cells = <0>; |
| power-domains = <&CLUSTER_PD>; |
| domain-idle-states = <&CPU_SLEEP>; |
| }; |
| |
| CLUSTER_PD: power-domain-cpu-cluster { |
| #power-domain-cells = <0>; |
| power-domains = <&mpm>; |
| domain-idle-states = <&CLUSTER_SLEEP>; |
| }; |
| }; |
| |
| rpm: remoteproc { |
| compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc"; |
| |
| glink-edge { |
| compatible = "qcom,glink-rpm"; |
| interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| mboxes = <&apcs_glb 0>; |
| |
| rpm_requests: rpm-requests { |
| compatible = "qcom,rpm-qcm2290"; |
| qcom,glink-channels = "rpm_requests"; |
| |
| rpmcc: clock-controller { |
| compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc"; |
| clocks = <&xo_board>; |
| clock-names = "xo"; |
| #clock-cells = <1>; |
| }; |
| |
| rpmpd: power-controller { |
| compatible = "qcom,qcm2290-rpmpd"; |
| #power-domain-cells = <1>; |
| operating-points-v2 = <&rpmpd_opp_table>; |
| |
| rpmpd_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| rpmpd_opp_min_svs: opp1 { |
| opp-level = <RPM_SMD_LEVEL_MIN_SVS>; |
| }; |
| |
| rpmpd_opp_low_svs: opp2 { |
| opp-level = <RPM_SMD_LEVEL_LOW_SVS>; |
| }; |
| |
| rpmpd_opp_svs: opp3 { |
| opp-level = <RPM_SMD_LEVEL_SVS>; |
| }; |
| |
| rpmpd_opp_svs_plus: opp4 { |
| opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; |
| }; |
| |
| rpmpd_opp_nom: opp5 { |
| opp-level = <RPM_SMD_LEVEL_NOM>; |
| }; |
| |
| rpmpd_opp_nom_plus: opp6 { |
| opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; |
| }; |
| |
| rpmpd_opp_turbo: opp7 { |
| opp-level = <RPM_SMD_LEVEL_TURBO>; |
| }; |
| |
| rpmpd_opp_turbo_plus: opp8 { |
| opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| mpm: interrupt-controller { |
| compatible = "qcom,mpm"; |
| qcom,rpm-msg-ram = <&apss_mpm>; |
| interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&apcs_glb 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| #power-domain-cells = <0>; |
| interrupt-parent = <&intc>; |
| qcom,mpm-pin-count = <96>; |
| qcom,mpm-pin-map = <2 275>, /* TSENS0 uplow */ |
| <5 296>, /* Soundwire master_irq */ |
| <12 422>, /* DWC3 ss_phy_irq */ |
| <24 79>, /* Soundwire wake_irq */ |
| <86 183>, /* MPM wake, SPMI */ |
| <90 260>; /* QUSB2_PHY DP+DM */ |
| }; |
| }; |
| |
| reserved_memory: reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| hyp_mem: hyp@45700000 { |
| reg = <0x0 0x45700000 0x0 0x600000>; |
| no-map; |
| }; |
| |
| xbl_aop_mem: xbl-aop@45e00000 { |
| reg = <0x0 0x45e00000 0x0 0x140000>; |
| no-map; |
| }; |
| |
| sec_apps_mem: sec-apps@45fff000 { |
| reg = <0x0 0x45fff000 0x0 0x1000>; |
| no-map; |
| }; |
| |
| smem_mem: smem@46000000 { |
| compatible = "qcom,smem"; |
| reg = <0x0 0x46000000 0x0 0x200000>; |
| no-map; |
| |
| hwlocks = <&tcsr_mutex 3>; |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| }; |
| |
| pil_modem_mem: modem@4ab00000 { |
| reg = <0x0 0x4ab00000 0x0 0x6900000>; |
| no-map; |
| }; |
| |
| pil_video_mem: video@51400000 { |
| reg = <0x0 0x51400000 0x0 0x500000>; |
| no-map; |
| }; |
| |
| wlan_msa_mem: wlan-msa@51900000 { |
| reg = <0x0 0x51900000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| pil_adsp_mem: adsp@51a00000 { |
| reg = <0x0 0x51a00000 0x0 0x1c00000>; |
| no-map; |
| }; |
| |
| pil_ipa_fw_mem: ipa-fw@53600000 { |
| reg = <0x0 0x53600000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| pil_ipa_gsi_mem: ipa-gsi@53610000 { |
| reg = <0x0 0x53610000 0x0 0x5000>; |
| no-map; |
| }; |
| |
| pil_gpu_mem: zap@53615000 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0x53615000 0x0 0x2000>; |
| no-map; |
| }; |
| |
| cont_splash_memory: framebuffer@5c000000 { |
| reg = <0x0 0x5c000000 0x0 0x00f00000>; |
| no-map; |
| }; |
| |
| dfps_data_memory: dpfs-data@5cf00000 { |
| reg = <0x0 0x5cf00000 0x0 0x0100000>; |
| no-map; |
| }; |
| |
| removed_mem: reserved@60000000 { |
| reg = <0x0 0x60000000 0x0 0x3900000>; |
| no-map; |
| }; |
| |
| rmtfs_mem: memory@89b01000 { |
| compatible = "qcom,rmtfs-mem"; |
| reg = <0x0 0x89b01000 0x0 0x200000>; |
| no-map; |
| |
| qcom,client-id = <1>; |
| qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; |
| }; |
| }; |
| |
| smp2p-adsp { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <443>, <429>; |
| |
| interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&apcs_glb 10>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <2>; |
| |
| adsp_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| adsp_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-mpss { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <435>, <428>; |
| |
| interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&apcs_glb 14>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <1>; |
| |
| modem_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| modem_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| wlan_smp2p_in: wlan-wpss-to-ap { |
| qcom,entry-name = "wlan"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| soc: soc@0 { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0 0 0 0 0x10 0>; |
| dma-ranges = <0 0 0 0 0x10 0>; |
| |
| tcsr_mutex: hwlock@340000 { |
| compatible = "qcom,tcsr-mutex"; |
| reg = <0x0 0x00340000 0x0 0x20000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| tcsr_regs: syscon@3c0000 { |
| compatible = "qcom,qcm2290-tcsr", "syscon"; |
| reg = <0x0 0x003c0000 0x0 0x40000>; |
| }; |
| |
| tlmm: pinctrl@500000 { |
| compatible = "qcom,qcm2290-tlmm"; |
| reg = <0x0 0x00500000 0x0 0x300000>; |
| interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| gpio-ranges = <&tlmm 0 0 127>; |
| wakeup-parent = <&mpm>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| qup_i2c0_default: qup-i2c0-default-state { |
| pins = "gpio0", "gpio1"; |
| function = "qup0"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c1_default: qup-i2c1-default-state { |
| pins = "gpio4", "gpio5"; |
| function = "qup1"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c2_default: qup-i2c2-default-state { |
| pins = "gpio6", "gpio7"; |
| function = "qup2"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c3_default: qup-i2c3-default-state { |
| pins = "gpio8", "gpio9"; |
| function = "qup3"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c4_default: qup-i2c4-default-state { |
| pins = "gpio12", "gpio13"; |
| function = "qup4"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_i2c5_default: qup-i2c5-default-state { |
| pins = "gpio14", "gpio15"; |
| function = "qup5"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_spi0_default: qup-spi0-default-state { |
| pins = "gpio0", "gpio1","gpio2", "gpio3"; |
| function = "qup0"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_spi1_default: qup-spi1-default-state { |
| pins = "gpio4", "gpio5", "gpio69", "gpio70"; |
| function = "qup1"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_spi2_default: qup-spi2-default-state { |
| pins = "gpio6", "gpio7", "gpio71", "gpio80"; |
| function = "qup2"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_spi3_default: qup-spi3-default-state { |
| pins = "gpio8", "gpio9", "gpio10", "gpio11"; |
| function = "qup3"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_spi4_default: qup-spi4-default-state { |
| pins = "gpio12", "gpio13", "gpio96", "gpio97"; |
| function = "qup4"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_spi5_default: qup-spi5-default-state { |
| pins = "gpio14", "gpio15", "gpio16", "gpio17"; |
| function = "qup5"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| qup_uart0_default: qup-uart0-default-state { |
| pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| function = "qup0"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| qup_uart4_default: qup-uart4-default-state { |
| pins = "gpio12", "gpio13"; |
| function = "qup4"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| sdc1_state_on: sdc1-on-state { |
| clk-pins { |
| pins = "sdc1_clk"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| cmd-pins { |
| pins = "sdc1_cmd"; |
| drive-strength = <10>; |
| bias-pull-up; |
| }; |
| |
| data-pins { |
| pins = "sdc1_data"; |
| drive-strength = <10>; |
| bias-pull-up; |
| }; |
| |
| rclk-pins { |
| pins = "sdc1_rclk"; |
| bias-pull-down; |
| }; |
| }; |
| |
| sdc1_state_off: sdc1-off-state { |
| clk-pins { |
| pins = "sdc1_clk"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| cmd-pins { |
| pins = "sdc1_cmd"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| data-pins { |
| pins = "sdc1_data"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| rclk-pins { |
| pins = "sdc1_rclk"; |
| bias-pull-down; |
| }; |
| }; |
| |
| sdc2_state_on: sdc2-on-state { |
| clk-pins { |
| pins = "sdc2_clk"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| cmd-pins { |
| pins = "sdc2_cmd"; |
| drive-strength = <10>; |
| bias-pull-up; |
| }; |
| |
| data-pins { |
| pins = "sdc2_data"; |
| drive-strength = <10>; |
| bias-pull-up; |
| }; |
| }; |
| |
| sdc2_state_off: sdc2-off-state { |
| clk-pins { |
| pins = "sdc2_clk"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| cmd-pins { |
| pins = "sdc2_cmd"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| data-pins { |
| pins = "sdc2_data"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| }; |
| |
| gcc: clock-controller@1400000 { |
| compatible = "qcom,gcc-qcm2290"; |
| reg = <0x0 0x01400000 0x0 0x1f0000>; |
| clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; |
| clock-names = "bi_tcxo", "sleep_clk"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| usb_hsphy: phy@1613000 { |
| compatible = "qcom,qcm2290-qusb2-phy"; |
| reg = <0x0 0x01613000 0x0 0x180>; |
| |
| clocks = <&gcc GCC_AHB2PHY_USB_CLK>, |
| <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "cfg_ahb", "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| nvmem-cells = <&qusb2_hstx_trim>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_qmpphy: phy@1615000 { |
| compatible = "qcom,qcm2290-qmp-usb3-phy"; |
| reg = <0x0 0x01615000 0x0 0x1000>; |
| |
| clocks = <&gcc GCC_AHB2PHY_USB_CLK>, |
| <&gcc GCC_USB3_PRIM_CLKREF_CLK>, |
| <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; |
| clock-names = "cfg_ahb", |
| "ref", |
| "com_aux", |
| "pipe"; |
| |
| resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>, |
| <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>; |
| reset-names = "phy", |
| "phy_phy"; |
| |
| #clock-cells = <0>; |
| clock-output-names = "usb3_phy_pipe_clk_src"; |
| |
| #phy-cells = <0>; |
| orientation-switch; |
| |
| qcom,tcsr-reg = <&tcsr_regs 0xb244>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_qmpphy_out: endpoint { |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_qmpphy_usb_ss_in: endpoint { |
| remote-endpoint = <&usb_dwc3_ss>; |
| }; |
| }; |
| }; |
| }; |
| |
| system_noc: interconnect@1880000 { |
| compatible = "qcom,qcm2290-snoc"; |
| reg = <0x0 0x01880000 0x0 0x60200>; |
| #interconnect-cells = <2>; |
| |
| qup_virt: interconnect-qup { |
| compatible = "qcom,qcm2290-qup-virt"; |
| #interconnect-cells = <2>; |
| }; |
| |
| mmnrt_virt: interconnect-mmnrt { |
| compatible = "qcom,qcm2290-mmnrt-virt"; |
| #interconnect-cells = <2>; |
| }; |
| |
| mmrt_virt: interconnect-mmrt { |
| compatible = "qcom,qcm2290-mmrt-virt"; |
| #interconnect-cells = <2>; |
| }; |
| }; |
| |
| config_noc: interconnect@1900000 { |
| compatible = "qcom,qcm2290-cnoc"; |
| reg = <0x0 0x01900000 0x0 0x8200>; |
| #interconnect-cells = <2>; |
| }; |
| |
| qfprom@1b44000 { |
| compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; |
| reg = <0x0 0x01b44000 0x0 0x3000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| qusb2_hstx_trim: hstx-trim@25b { |
| reg = <0x25b 0x1>; |
| bits = <1 4>; |
| }; |
| |
| gpu_speed_bin: gpu-speed-bin@2006 { |
| reg = <0x2006 0x2>; |
| bits = <5 8>; |
| }; |
| }; |
| |
| pmu@1b8e300 { |
| compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon"; |
| reg = <0x0 0x01b8e300 0x0 0x600>; |
| interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; |
| |
| operating-points-v2 = <&cpu_bwmon_opp_table>; |
| interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG |
| &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>; |
| |
| cpu_bwmon_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-0 { |
| opp-peak-kBps = <(200 * 4 * 1000)>; |
| }; |
| |
| opp-1 { |
| opp-peak-kBps = <(300 * 4 * 1000)>; |
| }; |
| |
| opp-2 { |
| opp-peak-kBps = <(451 * 4 * 1000)>; |
| }; |
| |
| opp-3 { |
| opp-peak-kBps = <(547 * 4 * 1000)>; |
| }; |
| |
| opp-4 { |
| opp-peak-kBps = <(681 * 4 * 1000)>; |
| }; |
| |
| opp-5 { |
| opp-peak-kBps = <(768 * 4 * 1000)>; |
| }; |
| |
| opp-6 { |
| opp-peak-kBps = <(1017 * 4 * 1000)>; |
| }; |
| |
| opp-7 { |
| opp-peak-kBps = <(1353 * 4 * 1000)>; |
| }; |
| |
| opp-8 { |
| opp-peak-kBps = <(1555 * 4 * 1000)>; |
| }; |
| |
| opp-9 { |
| opp-peak-kBps = <(1804 * 4 * 1000)>; |
| }; |
| }; |
| }; |
| |
| spmi_bus: spmi@1c40000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x0 0x01c40000 0x0 0x1100>, |
| <0x0 0x01e00000 0x0 0x2000000>, |
| <0x0 0x03e00000 0x0 0x100000>, |
| <0x0 0x03f00000 0x0 0xa0000>, |
| <0x0 0x01c0a000 0x0 0x26000>; |
| reg-names = "core", |
| "chnls", |
| "obsrvr", |
| "intr", |
| "cnfg"; |
| interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "periph_irq"; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| }; |
| |
| tsens0: thermal-sensor@4411000 { |
| compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x04411000 0x0 0x1ff>, |
| <0x0 0x04410000 0x0 0x8>; |
| #qcom,sensors = <10>; |
| interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", "critical"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| rng: rng@4453000 { |
| compatible = "qcom,prng-ee"; |
| reg = <0x0 0x04453000 0x0 0x1000>; |
| clocks = <&rpmcc RPM_SMD_HWKM_CLK>; |
| clock-names = "core"; |
| }; |
| |
| bimc: interconnect@4480000 { |
| compatible = "qcom,qcm2290-bimc"; |
| reg = <0x0 0x04480000 0x0 0x80000>; |
| #interconnect-cells = <2>; |
| }; |
| |
| rpm_msg_ram: sram@45f0000 { |
| compatible = "qcom,rpm-msg-ram", "mmio-sram"; |
| reg = <0x0 0x045f0000 0x0 0x7000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x0 0x045f0000 0x7000>; |
| |
| apss_mpm: sram@1b8 { |
| reg = <0x1b8 0x48>; |
| }; |
| }; |
| |
| sram@4690000 { |
| compatible = "qcom,rpm-stats"; |
| reg = <0x0 0x04690000 0x0 0x10000>; |
| }; |
| |
| sdhc_1: mmc@4744000 { |
| compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; |
| reg = <0x0 0x04744000 0x0 0x1000>, |
| <0x0 0x04745000 0x0 0x1000>, |
| <0x0 0x04748000 0x0 0x8000>; |
| reg-names = "hc", |
| "cqhci", |
| "ice"; |
| |
| interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| <&gcc GCC_SDCC1_APPS_CLK>, |
| <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| <&gcc GCC_SDCC1_ICE_CORE_CLK>; |
| clock-names = "iface", |
| "core", |
| "xo", |
| "ice"; |
| |
| resets = <&gcc GCC_SDCC1_BCR>; |
| |
| power-domains = <&rpmpd QCM2290_VDDCX>; |
| operating-points-v2 = <&sdhc1_opp_table>; |
| iommus = <&apps_smmu 0xc0 0x0>; |
| interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>; |
| interconnect-names = "sdhc-ddr", |
| "cpu-sdhc"; |
| |
| qcom,dll-config = <0x000f642c>; |
| qcom,ddr-config = <0x80040868>; |
| bus-width = <8>; |
| |
| status = "disabled"; |
| |
| sdhc1_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-100000000 { |
| opp-hz = /bits/ 64 <100000000>; |
| required-opps = <&rpmpd_opp_low_svs>; |
| opp-peak-kBps = <250000 133320>; |
| opp-avg-kBps = <102400 65000>; |
| }; |
| |
| opp-192000000 { |
| opp-hz = /bits/ 64 <192000000>; |
| required-opps = <&rpmpd_opp_low_svs>; |
| opp-peak-kBps = <800000 300000>; |
| opp-avg-kBps = <204800 200000>; |
| }; |
| |
| opp-384000000 { |
| opp-hz = /bits/ 64 <384000000>; |
| required-opps = <&rpmpd_opp_svs_plus>; |
| opp-peak-kBps = <800000 300000>; |
| opp-avg-kBps = <204800 200000>; |
| }; |
| }; |
| }; |
| |
| sdhc_2: mmc@4784000 { |
| compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; |
| reg = <0x0 0x04784000 0x0 0x1000>; |
| reg-names = "hc"; |
| |
| interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| <&gcc GCC_SDCC2_APPS_CLK>, |
| <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "iface", |
| "core", |
| "xo"; |
| |
| resets = <&gcc GCC_SDCC2_BCR>; |
| |
| power-domains = <&rpmpd QCM2290_VDDCX>; |
| operating-points-v2 = <&sdhc2_opp_table>; |
| iommus = <&apps_smmu 0xa0 0x0>; |
| interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>; |
| interconnect-names = "sdhc-ddr", |
| "cpu-sdhc"; |
| |
| qcom,dll-config = <0x0007642c>; |
| qcom,ddr-config = <0x80040868>; |
| bus-width = <4>; |
| |
| status = "disabled"; |
| |
| sdhc2_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-100000000 { |
| opp-hz = /bits/ 64 <100000000>; |
| required-opps = <&rpmpd_opp_low_svs>; |
| opp-peak-kBps = <250000 133320>; |
| opp-avg-kBps = <261438 150000>; |
| }; |
| |
| opp-202000000 { |
| opp-hz = /bits/ 64 <202000000>; |
| required-opps = <&rpmpd_opp_svs_plus>; |
| opp-peak-kBps = <800000 300000>; |
| opp-avg-kBps = <261438 300000>; |
| }; |
| }; |
| }; |
| |
| gpi_dma0: dma-controller@4a00000 { |
| compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma"; |
| reg = <0x0 0x04a00000 0x0 0x60000>; |
| interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; |
| dma-channels = <10>; |
| dma-channel-mask = <0x1f>; |
| iommus = <&apps_smmu 0xf6 0x0>; |
| #dma-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| qupv3_id_0: geniqup@4ac0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0x0 0x04ac0000 0x0 0x2000>; |
| clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| clock-names = "m-ahb", "s-ahb"; |
| iommus = <&apps_smmu 0xe3 0x0>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| status = "disabled"; |
| |
| i2c0: i2c@4a80000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x04a80000 0x0 0x4000>; |
| interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_i2c0_default>; |
| pinctrl-names = "default"; |
| dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 0 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, |
| <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@4a80000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x04a80000 0x0 0x4000>; |
| interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi0_default>; |
| pinctrl-names = "default"; |
| dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 0 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@4a80000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0x04a80000 0x0 0x4000>; |
| interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_uart0_default>; |
| pinctrl-names = "default"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@4a84000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x04a84000 0x0 0x4000>; |
| interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_i2c1_default>; |
| pinctrl-names = "default"; |
| dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 1 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, |
| <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@4a84000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x04a84000 0x0 0x4000>; |
| interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi1_default>; |
| pinctrl-names = "default"; |
| dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 1 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@4a88000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x04a88000 0x0 0x4000>; |
| interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_i2c2_default>; |
| pinctrl-names = "default"; |
| dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 2 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, |
| <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@4a88000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x04a88000 0x0 0x4000>; |
| interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi2_default>; |
| pinctrl-names = "default"; |
| dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 2 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@4a8c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x04a8c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_i2c3_default>; |
| pinctrl-names = "default"; |
| dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 3 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, |
| <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@4a8c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x04a8c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi3_default>; |
| pinctrl-names = "default"; |
| dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 3 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@4a90000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x04a90000 0x0 0x4000>; |
| interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_i2c4_default>; |
| pinctrl-names = "default"; |
| dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 4 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, |
| <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@4a90000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x04a90000 0x0 0x4000>; |
| interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi4_default>; |
| dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 4 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@4a90000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0x04a90000 0x0 0x4000>; |
| interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_uart4_default>; |
| pinctrl-names = "default"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@4a94000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x04a94000 0x0 0x4000>; |
| interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_i2c5_default>; |
| pinctrl-names = "default"; |
| dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 5 QCOM_GPI_I2C>; |
| dma-names = "tx", "rx"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, |
| <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi5: spi@4a94000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x04a94000 0x0 0x4000>; |
| interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| pinctrl-0 = <&qup_spi5_default>; |
| pinctrl-names = "default"; |
| dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 5 QCOM_GPI_SPI>; |
| dma-names = "tx", "rx"; |
| interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG |
| &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usb: usb@4ef8800 { |
| compatible = "qcom,qcm2290-dwc3", "qcom,dwc3"; |
| reg = <0x0 0x04ef8800 0x0 0x400>; |
| interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, |
| <&mpm 12 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hs_phy_irq", |
| "ss_phy_irq"; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>, |
| <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_SLEEP_CLK>, |
| <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB3_PRIM_CLKREF_CLK>; |
| clock-names = "cfg_noc", |
| "core", |
| "iface", |
| "sleep", |
| "mock_utmi", |
| "xo"; |
| |
| assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <133333333>; |
| |
| resets = <&gcc GCC_USB30_PRIM_BCR>; |
| power-domains = <&gcc GCC_USB30_PRIM_GDSC>; |
| /* TODO: USB<->IPA path */ |
| interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>; |
| interconnect-names = "usb-ddr", |
| "apps-usb"; |
| wakeup-source; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| usb_dwc3: usb@4e00000 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0x04e00000 0x0 0xcd00>; |
| interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usb_hsphy>, <&usb_qmpphy>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| iommus = <&apps_smmu 0x120 0x0>; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| snps,has-lpm-erratum; |
| snps,hird-threshold = /bits/ 8 <0x10>; |
| snps,usb3_lpm_capable; |
| maximum-speed = "super-speed"; |
| dr_mode = "otg"; |
| usb-role-switch; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_dwc3_hs: endpoint { |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_dwc3_ss: endpoint { |
| remote-endpoint = <&usb_qmpphy_usb_ss_in>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| gpu: gpu@5900000 { |
| compatible = "qcom,adreno-07000200", "qcom,adreno"; |
| reg = <0x0 0x05900000 0x0 0x40000>; |
| reg-names = "kgsl_3d0_reg_memory"; |
| |
| interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gpucc GPU_CC_GX_GFX3D_CLK>, |
| <&gpucc GPU_CC_AHB_CLK>, |
| <&gcc GCC_BIMC_GPU_AXI_CLK>, |
| <&gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| <&gpucc GPU_CC_CX_GMU_CLK>, |
| <&gpucc GPU_CC_CXO_CLK>; |
| clock-names = "core", |
| "iface", |
| "mem_iface", |
| "alt_mem_iface", |
| "gmu", |
| "xo"; |
| |
| interconnects = <&bimc MASTER_GFX3D RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; |
| interconnect-names = "gfx-mem"; |
| |
| iommus = <&adreno_smmu 0 1>, |
| <&adreno_smmu 2 0>; |
| operating-points-v2 = <&gpu_opp_table>; |
| power-domains = <&rpmpd QCM2290_VDDCX>; |
| qcom,gmu = <&gmu_wrapper>; |
| |
| nvmem-cells = <&gpu_speed_bin>; |
| nvmem-cell-names = "speed_bin"; |
| #cooling-cells = <2>; |
| |
| status = "disabled"; |
| |
| zap-shader { |
| memory-region = <&pil_gpu_mem>; |
| }; |
| |
| gpu_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| /* TODO: Scale RPM_SMD_BIMC_GPU_CLK w/ turbo freqs */ |
| opp-1123200000 { |
| opp-hz = /bits/ 64 <1123200000>; |
| required-opps = <&rpmpd_opp_turbo_plus>; |
| opp-peak-kBps = <6881000>; |
| opp-supported-hw = <0x3>; |
| turbo-mode; |
| }; |
| |
| opp-1017600000 { |
| opp-hz = /bits/ 64 <1017600000>; |
| required-opps = <&rpmpd_opp_turbo>; |
| opp-peak-kBps = <6881000>; |
| opp-supported-hw = <0x3>; |
| turbo-mode; |
| }; |
| |
| opp-921600000 { |
| opp-hz = /bits/ 64 <921600000>; |
| required-opps = <&rpmpd_opp_nom_plus>; |
| opp-peak-kBps = <6881000>; |
| opp-supported-hw = <0x3>; |
| }; |
| |
| opp-844800000 { |
| opp-hz = /bits/ 64 <844800000>; |
| required-opps = <&rpmpd_opp_nom>; |
| opp-peak-kBps = <6881000>; |
| opp-supported-hw = <0x7>; |
| }; |
| |
| opp-672000000 { |
| opp-hz = /bits/ 64 <672000000>; |
| required-opps = <&rpmpd_opp_svs_plus>; |
| opp-peak-kBps = <3879000>; |
| opp-supported-hw = <0xf>; |
| }; |
| |
| opp-537600000 { |
| opp-hz = /bits/ 64 <537600000>; |
| required-opps = <&rpmpd_opp_svs>; |
| opp-peak-kBps = <2929000>; |
| opp-supported-hw = <0xf>; |
| }; |
| |
| opp-355200000 { |
| opp-hz = /bits/ 64 <355200000>; |
| required-opps = <&rpmpd_opp_low_svs>; |
| opp-peak-kBps = <1720000>; |
| opp-supported-hw = <0xf>; |
| }; |
| }; |
| }; |
| |
| gmu_wrapper: gmu@596a000 { |
| compatible = "qcom,adreno-gmu-wrapper"; |
| reg = <0x0 0x0596a000 0x0 0x30000>; |
| reg-names = "gmu"; |
| power-domains = <&gpucc GPU_CX_GDSC>, |
| <&gpucc GPU_GX_GDSC>; |
| power-domain-names = "cx", |
| "gx"; |
| }; |
| |
| gpucc: clock-controller@5990000 { |
| compatible = "qcom,qcm2290-gpucc"; |
| reg = <0x0 0x05990000 0x0 0x9000>; |
| clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, |
| <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| <&gcc GCC_GPU_GPLL0_CLK_SRC>, |
| <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; |
| power-domains = <&rpmpd QCM2290_VDDCX>; |
| required-opps = <&rpmpd_opp_low_svs>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| adreno_smmu: iommu@59a0000 { |
| compatible = "qcom,qcm2290-smmu-500", "qcom,adreno-smmu", |
| "qcom,smmu-500", "arm,mmu-500"; |
| reg = <0x0 0x059a0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, |
| <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, |
| <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; |
| clock-names = "mem", |
| "hlos", |
| "iface"; |
| |
| power-domains = <&gpucc GPU_CX_GDSC>; |
| |
| #global-interrupts = <1>; |
| #iommu-cells = <2>; |
| }; |
| |
| mdss: display-subsystem@5e00000 { |
| compatible = "qcom,qcm2290-mdss"; |
| reg = <0x0 0x05e00000 0x0 0x1000>; |
| reg-names = "mdss"; |
| interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| clocks = <&gcc GCC_DISP_AHB_CLK>, |
| <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>; |
| clock-names = "iface", |
| "bus", |
| "core"; |
| |
| resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; |
| |
| power-domains = <&dispcc MDSS_GDSC>; |
| |
| iommus = <&apps_smmu 0x420 0x2>, |
| <&apps_smmu 0x421 0x0>; |
| interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG |
| &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, |
| <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG |
| &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>; |
| interconnect-names = "mdp0-mem", |
| "cpu-cfg"; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| mdp: display-controller@5e01000 { |
| compatible = "qcom,qcm2290-dpu"; |
| reg = <0x0 0x05e01000 0x0 0x8f000>, |
| <0x0 0x05eb0000 0x0 0x2008>; |
| reg-names = "mdp", |
| "vbif"; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <0>; |
| |
| clocks = <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, |
| <&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| clock-names = "bus", |
| "iface", |
| "core", |
| "lut", |
| "vsync"; |
| |
| operating-points-v2 = <&mdp_opp_table>; |
| power-domains = <&rpmpd QCM2290_VDDCX>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| dpu_intf1_out: endpoint { |
| remote-endpoint = <&mdss_dsi0_in>; |
| }; |
| }; |
| }; |
| |
| mdp_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-19200000 { |
| opp-hz = /bits/ 64 <19200000>; |
| required-opps = <&rpmpd_opp_min_svs>; |
| }; |
| |
| opp-192000000 { |
| opp-hz = /bits/ 64 <192000000>; |
| required-opps = <&rpmpd_opp_low_svs>; |
| }; |
| |
| opp-256000000 { |
| opp-hz = /bits/ 64 <256000000>; |
| required-opps = <&rpmpd_opp_svs>; |
| }; |
| |
| opp-307200000 { |
| opp-hz = /bits/ 64 <307200000>; |
| required-opps = <&rpmpd_opp_svs_plus>; |
| }; |
| |
| opp-384000000 { |
| opp-hz = /bits/ 64 <384000000>; |
| required-opps = <&rpmpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| mdss_dsi0: dsi@5e94000 { |
| compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl"; |
| reg = <0x0 0x05e94000 0x0 0x400>; |
| reg-names = "dsi_ctrl"; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <4>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, |
| <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_PCLK0_CLK>, |
| <&dispcc DISP_CC_MDSS_ESC0_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&gcc GCC_DISP_HF_AXI_CLK>; |
| clock-names = "byte", |
| "byte_intf", |
| "pixel", |
| "core", |
| "iface", |
| "bus"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; |
| assigned-clock-parents = <&mdss_dsi0_phy 0>, |
| <&mdss_dsi0_phy 1>; |
| |
| operating-points-v2 = <&dsi_opp_table>; |
| power-domains = <&rpmpd QCM2290_VDDCX>; |
| phys = <&mdss_dsi0_phy>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| |
| dsi_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-19200000 { |
| opp-hz = /bits/ 64 <19200000>; |
| required-opps = <&rpmpd_opp_min_svs>; |
| }; |
| |
| opp-164000000 { |
| opp-hz = /bits/ 64 <164000000>; |
| required-opps = <&rpmpd_opp_low_svs>; |
| }; |
| |
| opp-187500000 { |
| opp-hz = /bits/ 64 <187500000>; |
| required-opps = <&rpmpd_opp_svs>; |
| }; |
| }; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| mdss_dsi0_in: endpoint { |
| remote-endpoint = <&dpu_intf1_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| mdss_dsi0_out: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| mdss_dsi0_phy: phy@5e94400 { |
| compatible = "qcom,dsi-phy-14nm-2290"; |
| reg = <0x0 0x05e94400 0x0 0x100>, |
| <0x0 0x05e94500 0x0 0x300>, |
| <0x0 0x05e94800 0x0 0x188>; |
| reg-names = "dsi_phy", |
| "dsi_phy_lane", |
| "dsi_pll"; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "iface", |
| "ref"; |
| |
| power-domains = <&rpmpd QCM2290_VDDMX>; |
| required-opps = <&rpmpd_opp_nom>; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| dispcc: clock-controller@5f00000 { |
| compatible = "qcom,qcm2290-dispcc"; |
| reg = <0x0 0x05f00000 0x0 0x20000>; |
| clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| <&rpmcc RPM_SMD_XO_A_CLK_SRC>, |
| <&gcc GCC_DISP_GPLL0_CLK_SRC>, |
| <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, |
| <&mdss_dsi0_phy 0>, |
| <&mdss_dsi0_phy 1>; |
| clock-names = "bi_tcxo", |
| "bi_tcxo_ao", |
| "gcc_disp_gpll0_clk_src", |
| "gcc_disp_gpll0_div_clk_src", |
| "dsi0_phy_pll_out_byteclk", |
| "dsi0_phy_pll_out_dsiclk"; |
| #power-domain-cells = <1>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| remoteproc_mpss: remoteproc@6080000 { |
| compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; |
| reg = <0x0 0x06080000 0x0 0x100>; |
| |
| interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", |
| "fatal", |
| "ready", |
| "handover", |
| "stop-ack", |
| "shutdown-ack"; |
| |
| clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "xo"; |
| |
| power-domains = <&rpmpd QCM2290_VDDCX>; |
| |
| memory-region = <&pil_modem_mem>; |
| |
| qcom,smem-states = <&modem_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; |
| label = "mpss"; |
| qcom,remote-pid = <1>; |
| mboxes = <&apcs_glb 12>; |
| }; |
| }; |
| |
| remoteproc_adsp: remoteproc@ab00000 { |
| compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas"; |
| reg = <0x0 0x0ab00000 0x0 0x100>; |
| |
| interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, |
| <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", |
| "fatal", |
| "ready", |
| "handover", |
| "stop-ack"; |
| |
| clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "xo"; |
| |
| power-domains = <&rpmpd QCM2290_VDD_LPI_CX>, |
| <&rpmpd QCM2290_VDD_LPI_MX>; |
| |
| memory-region = <&pil_adsp_mem>; |
| |
| qcom,smem-states = <&adsp_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; |
| label = "lpass"; |
| qcom,remote-pid = <2>; |
| mboxes = <&apcs_glb 8>; |
| }; |
| }; |
| |
| apps_smmu: iommu@c600000 { |
| compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500"; |
| reg = <0x0 0x0c600000 0x0 0x80000>; |
| #iommu-cells = <2>; |
| #global-interrupts = <1>; |
| |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| wifi: wifi@c800000 { |
| compatible = "qcom,wcn3990-wifi"; |
| reg = <0x0 0x0c800000 0x0 0x800000>; |
| reg-names = "membase"; |
| memory-region = <&wlan_msa_mem>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&apps_smmu 0x1a0 0x1>; |
| qcom,msa-fixed-perm; |
| status = "disabled"; |
| }; |
| |
| watchdog@f017000 { |
| compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt"; |
| reg = <0x0 0x0f017000 0x0 0x1000>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sleep_clk>; |
| }; |
| |
| apcs_glb: mailbox@f111000 { |
| compatible = "qcom,qcm2290-apcs-hmss-global"; |
| reg = <0x0 0x0f111000 0x0 0x1000>; |
| #mbox-cells = <1>; |
| }; |
| |
| timer@f120000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x0 0x0f120000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x0 0x0f121000 0x8000>; |
| |
| frame@0 { |
| reg = <0x0 0x1000>, |
| <0x1000 0x1000>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <0>; |
| }; |
| |
| frame@2000 { |
| reg = <0x2000 0x1000>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <1>; |
| status = "disabled"; |
| }; |
| |
| frame@3000 { |
| reg = <0x3000 0x1000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <2>; |
| status = "disabled"; |
| }; |
| |
| frame@4000 { |
| reg = <0x4000 0x1000>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <3>; |
| status = "disabled"; |
| }; |
| |
| frame@5000 { |
| reg = <0x5000 0x1000>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <4>; |
| status = "disabled"; |
| }; |
| |
| frame@6000 { |
| reg = <0x6000 0x1000>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <5>; |
| status = "disabled"; |
| }; |
| |
| frame@7000 { |
| reg = <0x7000 0x1000>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <6>; |
| status = "disabled"; |
| }; |
| }; |
| |
| intc: interrupt-controller@f200000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0 0x0f200000 0x0 0x10000>, |
| <0x0 0x0f300000 0x0 0x100000>; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| interrupt-parent = <&intc>; |
| #redistributor-regions = <1>; |
| redistributor-stride = <0x0 0x20000>; |
| }; |
| |
| cpufreq_hw: cpufreq@f521000 { |
| compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw"; |
| reg = <0x0 0x0f521000 0x0 0x1000>; |
| reg-names = "freq-domain0"; |
| interrupts-extended = <&lmh_cluster 0>; |
| interrupt-names = "dcvsh-irq-0"; |
| clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; |
| clock-names = "xo", "alternate"; |
| |
| #freq-domain-cells = <1>; |
| #clock-cells = <1>; |
| }; |
| |
| lmh_cluster: lmh@f550800 { |
| compatible = "qcom,qcm2290-lmh", "qcom,sm8150-lmh"; |
| reg = <0x0 0x0f550800 0x0 0x400>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| cpus = <&CPU0>; |
| qcom,lmh-temp-arm-millicelsius = <65000>; |
| qcom,lmh-temp-low-millicelsius = <94500>; |
| qcom,lmh-temp-high-millicelsius = <95000>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| thermal-zones { |
| mapss-thermal { |
| thermal-sensors = <&tsens0 0>; |
| |
| trips { |
| mapss_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| mapss_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| mapss_crit: mapss-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| video-thermal { |
| thermal-sensors = <&tsens0 1>; |
| |
| trips { |
| video_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| video_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| video_crit: video-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| wlan-thermal { |
| thermal-sensors = <&tsens0 2>; |
| |
| trips { |
| wlan_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| wlan_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| wlan_crit: wlan-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpuss0-thermal { |
| thermal-sensors = <&tsens0 3>; |
| |
| trips { |
| cpuss0_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpuss0_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpuss0_crit: cpuss0-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpuss1-thermal { |
| thermal-sensors = <&tsens0 4>; |
| |
| trips { |
| cpuss1_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpuss1_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpuss1_crit: cpuss1-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| mdm0-thermal { |
| thermal-sensors = <&tsens0 5>; |
| |
| trips { |
| mdm0_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| mdm0_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| mdm0_crit: mdm0-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| mdm1-thermal { |
| thermal-sensors = <&tsens0 6>; |
| |
| trips { |
| mdm1_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| mdm1_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| mdm1_crit: mdm1-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| gpu-thermal { |
| thermal-sensors = <&tsens0 7>; |
| |
| trips { |
| gpu_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| gpu_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| gpu_crit: gpu-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| hm-center-thermal { |
| thermal-sensors = <&tsens0 8>; |
| |
| trips { |
| hm_center_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| hm_center_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| hm_center_crit: hm-center-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| camera-thermal { |
| thermal-sensors = <&tsens0 9>; |
| |
| trips { |
| camera_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| camera_alert1: trip-point1 { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| camera_crit: camera-crit { |
| temperature = <110000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| }; |