| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Porting to u-boot: |
| * |
| * (C) Copyright 2010 |
| * Stefano Babic, DENX Software Engineering, sbabic@denx.de |
| * |
| * Linux IPU driver for MX51: |
| * |
| * (C) Copyright 2005-2010 Freescale Semiconductor, Inc. |
| */ |
| |
| /* #define DEBUG */ |
| |
| #include <common.h> |
| #include <log.h> |
| #include <linux/delay.h> |
| #include <linux/types.h> |
| #include <linux/errno.h> |
| #include <asm/io.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/sys_proto.h> |
| #include "ipu.h" |
| #include "ipu_regs.h" |
| |
| enum csc_type_t { |
| RGB2YUV = 0, |
| YUV2RGB, |
| RGB2RGB, |
| YUV2YUV, |
| CSC_NONE, |
| CSC_NUM |
| }; |
| |
| struct dp_csc_param_t { |
| int mode; |
| const int (*coeff)[5][3]; |
| }; |
| |
| #define SYNC_WAVE 0 |
| |
| /* DC display ID assignments */ |
| #define DC_DISP_ID_SYNC(di) (di) |
| #define DC_DISP_ID_SERIAL 2 |
| #define DC_DISP_ID_ASYNC 3 |
| |
| int dmfc_type_setup; |
| static int dmfc_size_28, dmfc_size_29, dmfc_size_24, dmfc_size_27, dmfc_size_23; |
| int g_di1_tvout; |
| |
| extern struct clk *g_ipu_clk; |
| extern struct clk *g_ldb_clk; |
| extern struct clk *g_di_clk[2]; |
| extern struct clk *g_pixel_clk[2]; |
| |
| extern unsigned char g_ipu_clk_enabled; |
| extern unsigned char g_dc_di_assignment[]; |
| |
| void ipu_dmfc_init(int dmfc_type, int first) |
| { |
| u32 dmfc_wr_chan, dmfc_dp_chan; |
| |
| if (first) { |
| if (dmfc_type_setup > dmfc_type) |
| dmfc_type = dmfc_type_setup; |
| else |
| dmfc_type_setup = dmfc_type; |
| |
| /* disable DMFC-IC channel*/ |
| __raw_writel(0x2, DMFC_IC_CTRL); |
| } else if (dmfc_type_setup >= DMFC_HIGH_RESOLUTION_DC) { |
| printf("DMFC high resolution has set, will not change\n"); |
| return; |
| } else |
| dmfc_type_setup = dmfc_type; |
| |
| if (dmfc_type == DMFC_HIGH_RESOLUTION_DC) { |
| /* 1 - segment 0~3; |
| * 5B - segement 4, 5; |
| * 5F - segement 6, 7; |
| * 1C, 2C and 6B, 6F unused; |
| */ |
| debug("IPU DMFC DC HIGH RES: 1(0~3), 5B(4,5), 5F(6,7)\n"); |
| dmfc_wr_chan = 0x00000088; |
| dmfc_dp_chan = 0x00009694; |
| dmfc_size_28 = 256 * 4; |
| dmfc_size_29 = 0; |
| dmfc_size_24 = 0; |
| dmfc_size_27 = 128 * 4; |
| dmfc_size_23 = 128 * 4; |
| } else if (dmfc_type == DMFC_HIGH_RESOLUTION_DP) { |
| /* 1 - segment 0, 1; |
| * 5B - segement 2~5; |
| * 5F - segement 6,7; |
| * 1C, 2C and 6B, 6F unused; |
| */ |
| debug("IPU DMFC DP HIGH RES: 1(0,1), 5B(2~5), 5F(6,7)\n"); |
| dmfc_wr_chan = 0x00000090; |
| dmfc_dp_chan = 0x0000968a; |
| dmfc_size_28 = 128 * 4; |
| dmfc_size_29 = 0; |
| dmfc_size_24 = 0; |
| dmfc_size_27 = 128 * 4; |
| dmfc_size_23 = 256 * 4; |
| } else if (dmfc_type == DMFC_HIGH_RESOLUTION_ONLY_DP) { |
| /* 5B - segement 0~3; |
| * 5F - segement 4~7; |
| * 1, 1C, 2C and 6B, 6F unused; |
| */ |
| debug("IPU DMFC ONLY-DP HIGH RES: 5B(0~3), 5F(4~7)\n"); |
| dmfc_wr_chan = 0x00000000; |
| dmfc_dp_chan = 0x00008c88; |
| dmfc_size_28 = 0; |
| dmfc_size_29 = 0; |
| dmfc_size_24 = 0; |
| dmfc_size_27 = 256 * 4; |
| dmfc_size_23 = 256 * 4; |
| } else { |
| /* 1 - segment 0, 1; |
| * 5B - segement 4, 5; |
| * 5F - segement 6, 7; |
| * 1C, 2C and 6B, 6F unused; |
| */ |
| debug("IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)\n"); |
| dmfc_wr_chan = 0x00000090; |
| dmfc_dp_chan = 0x00009694; |
| dmfc_size_28 = 128 * 4; |
| dmfc_size_29 = 0; |
| dmfc_size_24 = 0; |
| dmfc_size_27 = 128 * 4; |
| dmfc_size_23 = 128 * 4; |
| } |
| __raw_writel(dmfc_wr_chan, DMFC_WR_CHAN); |
| __raw_writel(0x202020F6, DMFC_WR_CHAN_DEF); |
| __raw_writel(dmfc_dp_chan, DMFC_DP_CHAN); |
| /* Enable chan 5 watermark set at 5 bursts and clear at 7 bursts */ |
| __raw_writel(0x2020F6F6, DMFC_DP_CHAN_DEF); |
| } |
| |
| void ipu_dmfc_set_wait4eot(int dma_chan, int width) |
| { |
| u32 dmfc_gen1 = __raw_readl(DMFC_GENERAL1); |
| |
| if (width >= HIGH_RESOLUTION_WIDTH) { |
| if (dma_chan == 23) |
| ipu_dmfc_init(DMFC_HIGH_RESOLUTION_DP, 0); |
| else if (dma_chan == 28) |
| ipu_dmfc_init(DMFC_HIGH_RESOLUTION_DC, 0); |
| } |
| |
| if (dma_chan == 23) { /*5B*/ |
| if (dmfc_size_23 / width > 3) |
| dmfc_gen1 |= 1UL << 20; |
| else |
| dmfc_gen1 &= ~(1UL << 20); |
| } else if (dma_chan == 24) { /*6B*/ |
| if (dmfc_size_24 / width > 1) |
| dmfc_gen1 |= 1UL << 22; |
| else |
| dmfc_gen1 &= ~(1UL << 22); |
| } else if (dma_chan == 27) { /*5F*/ |
| if (dmfc_size_27 / width > 2) |
| dmfc_gen1 |= 1UL << 21; |
| else |
| dmfc_gen1 &= ~(1UL << 21); |
| } else if (dma_chan == 28) { /*1*/ |
| if (dmfc_size_28 / width > 2) |
| dmfc_gen1 |= 1UL << 16; |
| else |
| dmfc_gen1 &= ~(1UL << 16); |
| } else if (dma_chan == 29) { /*6F*/ |
| if (dmfc_size_29 / width > 1) |
| dmfc_gen1 |= 1UL << 23; |
| else |
| dmfc_gen1 &= ~(1UL << 23); |
| } |
| |
| __raw_writel(dmfc_gen1, DMFC_GENERAL1); |
| } |
| |
| static void ipu_di_data_wave_config(int di, |
| int wave_gen, |
| int access_size, int component_size) |
| { |
| u32 reg; |
| reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) | |
| (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET); |
| __raw_writel(reg, DI_DW_GEN(di, wave_gen)); |
| } |
| |
| static void ipu_di_data_pin_config(int di, int wave_gen, int di_pin, int set, |
| int up, int down) |
| { |
| u32 reg; |
| |
| reg = __raw_readl(DI_DW_GEN(di, wave_gen)); |
| reg &= ~(0x3 << (di_pin * 2)); |
| reg |= set << (di_pin * 2); |
| __raw_writel(reg, DI_DW_GEN(di, wave_gen)); |
| |
| __raw_writel((down << 16) | up, DI_DW_SET(di, wave_gen, set)); |
| } |
| |
| static void ipu_di_sync_config(int di, int wave_gen, |
| int run_count, int run_src, |
| int offset_count, int offset_src, |
| int repeat_count, int cnt_clr_src, |
| int cnt_polarity_gen_en, |
| int cnt_polarity_clr_src, |
| int cnt_polarity_trigger_src, |
| int cnt_up, int cnt_down) |
| { |
| u32 reg; |
| |
| if ((run_count >= 0x1000) || (offset_count >= 0x1000) || |
| (repeat_count >= 0x1000) || |
| (cnt_up >= 0x400) || (cnt_down >= 0x400)) { |
| printf("DI%d counters out of range.\n", di); |
| return; |
| } |
| |
| reg = (run_count << 19) | (++run_src << 16) | |
| (offset_count << 3) | ++offset_src; |
| __raw_writel(reg, DI_SW_GEN0(di, wave_gen)); |
| reg = (cnt_polarity_gen_en << 29) | (++cnt_clr_src << 25) | |
| (++cnt_polarity_trigger_src << 12) | (++cnt_polarity_clr_src << 9); |
| reg |= (cnt_down << 16) | cnt_up; |
| if (repeat_count == 0) { |
| /* Enable auto reload */ |
| reg |= 0x10000000; |
| } |
| __raw_writel(reg, DI_SW_GEN1(di, wave_gen)); |
| reg = __raw_readl(DI_STP_REP(di, wave_gen)); |
| reg &= ~(0xFFFF << (16 * ((wave_gen - 1) & 0x1))); |
| reg |= repeat_count << (16 * ((wave_gen - 1) & 0x1)); |
| __raw_writel(reg, DI_STP_REP(di, wave_gen)); |
| } |
| |
| static void ipu_dc_map_config(int map, int byte_num, int offset, int mask) |
| { |
| int ptr = map * 3 + byte_num; |
| u32 reg; |
| |
| reg = __raw_readl(DC_MAP_CONF_VAL(ptr)); |
| reg &= ~(0xFFFF << (16 * (ptr & 0x1))); |
| reg |= ((offset << 8) | mask) << (16 * (ptr & 0x1)); |
| __raw_writel(reg, DC_MAP_CONF_VAL(ptr)); |
| |
| reg = __raw_readl(DC_MAP_CONF_PTR(map)); |
| reg &= ~(0x1F << ((16 * (map & 0x1)) + (5 * byte_num))); |
| reg |= ptr << ((16 * (map & 0x1)) + (5 * byte_num)); |
| __raw_writel(reg, DC_MAP_CONF_PTR(map)); |
| } |
| |
| static void ipu_dc_map_clear(int map) |
| { |
| u32 reg = __raw_readl(DC_MAP_CONF_PTR(map)); |
| __raw_writel(reg & ~(0xFFFF << (16 * (map & 0x1))), |
| DC_MAP_CONF_PTR(map)); |
| } |
| |
| static void ipu_dc_write_tmpl(int word, u32 opcode, u32 operand, int map, |
| int wave, int glue, int sync) |
| { |
| u32 reg; |
| int stop = 1; |
| |
| reg = sync; |
| reg |= (glue << 4); |
| reg |= (++wave << 11); |
| reg |= (++map << 15); |
| reg |= (operand << 20) & 0xFFF00000; |
| __raw_writel(reg, ipu_dc_tmpl_reg + word * 2); |
| |
| reg = (operand >> 12); |
| reg |= opcode << 4; |
| reg |= (stop << 9); |
| __raw_writel(reg, ipu_dc_tmpl_reg + word * 2 + 1); |
| } |
| |
| static void ipu_dc_link_event(int chan, int event, int addr, int priority) |
| { |
| u32 reg; |
| |
| reg = __raw_readl(DC_RL_CH(chan, event)); |
| reg &= ~(0xFFFF << (16 * (event & 0x1))); |
| reg |= ((addr << 8) | priority) << (16 * (event & 0x1)); |
| __raw_writel(reg, DC_RL_CH(chan, event)); |
| } |
| |
| /* Y = R * 1.200 + G * 2.343 + B * .453 + 0.250; |
| * U = R * -.672 + G * -1.328 + B * 2.000 + 512.250.; |
| * V = R * 2.000 + G * -1.672 + B * -.328 + 512.250.; |
| */ |
| static const int rgb2ycbcr_coeff[5][3] = { |
| {0x4D, 0x96, 0x1D}, |
| {0x3D5, 0x3AB, 0x80}, |
| {0x80, 0x395, 0x3EB}, |
| {0x0000, 0x0200, 0x0200}, /* B0, B1, B2 */ |
| {0x2, 0x2, 0x2}, /* S0, S1, S2 */ |
| }; |
| |
| /* R = (1.164 * (Y - 16)) + (1.596 * (Cr - 128)); |
| * G = (1.164 * (Y - 16)) - (0.392 * (Cb - 128)) - (0.813 * (Cr - 128)); |
| * B = (1.164 * (Y - 16)) + (2.017 * (Cb - 128); |
| */ |
| static const int ycbcr2rgb_coeff[5][3] = { |
| {0x095, 0x000, 0x0CC}, |
| {0x095, 0x3CE, 0x398}, |
| {0x095, 0x0FF, 0x000}, |
| {0x3E42, 0x010A, 0x3DD6}, /*B0,B1,B2 */ |
| {0x1, 0x1, 0x1}, /*S0,S1,S2 */ |
| }; |
| |
| #define mask_a(a) ((u32)(a) & 0x3FF) |
| #define mask_b(b) ((u32)(b) & 0x3FFF) |
| |
| /* Pls keep S0, S1 and S2 as 0x2 by using this convertion */ |
| static int rgb_to_yuv(int n, int red, int green, int blue) |
| { |
| int c; |
| c = red * rgb2ycbcr_coeff[n][0]; |
| c += green * rgb2ycbcr_coeff[n][1]; |
| c += blue * rgb2ycbcr_coeff[n][2]; |
| c /= 16; |
| c += rgb2ycbcr_coeff[3][n] * 4; |
| c += 8; |
| c /= 16; |
| if (c < 0) |
| c = 0; |
| if (c > 255) |
| c = 255; |
| return c; |
| } |
| |
| /* |
| * Row is for BG: RGB2YUV YUV2RGB RGB2RGB YUV2YUV CSC_NONE |
| * Column is for FG: RGB2YUV YUV2RGB RGB2RGB YUV2YUV CSC_NONE |
| */ |
| static struct dp_csc_param_t dp_csc_array[CSC_NUM][CSC_NUM] = { |
| { |
| {DP_COM_CONF_CSC_DEF_BOTH, &rgb2ycbcr_coeff}, |
| {0, 0}, |
| {0, 0}, |
| {DP_COM_CONF_CSC_DEF_BG, &rgb2ycbcr_coeff}, |
| {DP_COM_CONF_CSC_DEF_BG, &rgb2ycbcr_coeff} |
| }, |
| { |
| {0, 0}, |
| {DP_COM_CONF_CSC_DEF_BOTH, &ycbcr2rgb_coeff}, |
| {DP_COM_CONF_CSC_DEF_BG, &ycbcr2rgb_coeff}, |
| {0, 0}, |
| {DP_COM_CONF_CSC_DEF_BG, &ycbcr2rgb_coeff} |
| }, |
| { |
| {0, 0}, |
| {DP_COM_CONF_CSC_DEF_FG, &ycbcr2rgb_coeff}, |
| {0, 0}, |
| {0, 0}, |
| {0, 0} |
| }, |
| { |
| {DP_COM_CONF_CSC_DEF_FG, &rgb2ycbcr_coeff}, |
| {0, 0}, |
| {0, 0}, |
| {0, 0}, |
| {0, 0} |
| }, |
| { |
| {DP_COM_CONF_CSC_DEF_FG, &rgb2ycbcr_coeff}, |
| {DP_COM_CONF_CSC_DEF_FG, &ycbcr2rgb_coeff}, |
| {0, 0}, |
| {0, 0}, |
| {0, 0} |
| } |
| }; |
| |
| static enum csc_type_t fg_csc_type = CSC_NONE, bg_csc_type = CSC_NONE; |
| static int color_key_4rgb = 1; |
| |
| static void ipu_dp_csc_setup(int dp, struct dp_csc_param_t dp_csc_param, |
| unsigned char srm_mode_update) |
| { |
| u32 reg; |
| const int (*coeff)[5][3]; |
| |
| if (dp_csc_param.mode >= 0) { |
| reg = __raw_readl(DP_COM_CONF()); |
| reg &= ~DP_COM_CONF_CSC_DEF_MASK; |
| reg |= dp_csc_param.mode; |
| __raw_writel(reg, DP_COM_CONF()); |
| } |
| |
| coeff = dp_csc_param.coeff; |
| |
| if (coeff) { |
| __raw_writel(mask_a((*coeff)[0][0]) | |
| (mask_a((*coeff)[0][1]) << 16), DP_CSC_A_0()); |
| __raw_writel(mask_a((*coeff)[0][2]) | |
| (mask_a((*coeff)[1][0]) << 16), DP_CSC_A_1()); |
| __raw_writel(mask_a((*coeff)[1][1]) | |
| (mask_a((*coeff)[1][2]) << 16), DP_CSC_A_2()); |
| __raw_writel(mask_a((*coeff)[2][0]) | |
| (mask_a((*coeff)[2][1]) << 16), DP_CSC_A_3()); |
| __raw_writel(mask_a((*coeff)[2][2]) | |
| (mask_b((*coeff)[3][0]) << 16) | |
| ((*coeff)[4][0] << 30), DP_CSC_0()); |
| __raw_writel(mask_b((*coeff)[3][1]) | ((*coeff)[4][1] << 14) | |
| (mask_b((*coeff)[3][2]) << 16) | |
| ((*coeff)[4][2] << 30), DP_CSC_1()); |
| } |
| |
| if (srm_mode_update) { |
| reg = __raw_readl(IPU_SRM_PRI2) | 0x8; |
| __raw_writel(reg, IPU_SRM_PRI2); |
| } |
| } |
| |
| int ipu_dp_init(ipu_channel_t channel, uint32_t in_pixel_fmt, |
| uint32_t out_pixel_fmt) |
| { |
| int in_fmt, out_fmt; |
| int dp; |
| int partial = 0; |
| uint32_t reg; |
| |
| if (channel == MEM_FG_SYNC) { |
| dp = DP_SYNC; |
| partial = 1; |
| } else if (channel == MEM_BG_SYNC) { |
| dp = DP_SYNC; |
| partial = 0; |
| } else if (channel == MEM_BG_ASYNC0) { |
| dp = DP_ASYNC0; |
| partial = 0; |
| } else { |
| return -EINVAL; |
| } |
| |
| in_fmt = format_to_colorspace(in_pixel_fmt); |
| out_fmt = format_to_colorspace(out_pixel_fmt); |
| |
| if (partial) { |
| if (in_fmt == RGB) { |
| if (out_fmt == RGB) |
| fg_csc_type = RGB2RGB; |
| else |
| fg_csc_type = RGB2YUV; |
| } else { |
| if (out_fmt == RGB) |
| fg_csc_type = YUV2RGB; |
| else |
| fg_csc_type = YUV2YUV; |
| } |
| } else { |
| if (in_fmt == RGB) { |
| if (out_fmt == RGB) |
| bg_csc_type = RGB2RGB; |
| else |
| bg_csc_type = RGB2YUV; |
| } else { |
| if (out_fmt == RGB) |
| bg_csc_type = YUV2RGB; |
| else |
| bg_csc_type = YUV2YUV; |
| } |
| } |
| |
| /* Transform color key from rgb to yuv if CSC is enabled */ |
| reg = __raw_readl(DP_COM_CONF()); |
| if (color_key_4rgb && (reg & DP_COM_CONF_GWCKE) && |
| (((fg_csc_type == RGB2YUV) && (bg_csc_type == YUV2YUV)) || |
| ((fg_csc_type == YUV2YUV) && (bg_csc_type == RGB2YUV)) || |
| ((fg_csc_type == YUV2YUV) && (bg_csc_type == YUV2YUV)) || |
| ((fg_csc_type == YUV2RGB) && (bg_csc_type == YUV2RGB)))) { |
| int red, green, blue; |
| int y, u, v; |
| uint32_t color_key = __raw_readl(DP_GRAPH_WIND_CTRL()) & |
| 0xFFFFFFL; |
| |
| debug("_ipu_dp_init color key 0x%x need change to yuv fmt!\n", |
| color_key); |
| |
| red = (color_key >> 16) & 0xFF; |
| green = (color_key >> 8) & 0xFF; |
| blue = color_key & 0xFF; |
| |
| y = rgb_to_yuv(0, red, green, blue); |
| u = rgb_to_yuv(1, red, green, blue); |
| v = rgb_to_yuv(2, red, green, blue); |
| color_key = (y << 16) | (u << 8) | v; |
| |
| reg = __raw_readl(DP_GRAPH_WIND_CTRL()) & 0xFF000000L; |
| __raw_writel(reg | color_key, DP_GRAPH_WIND_CTRL()); |
| color_key_4rgb = 0; |
| |
| debug("_ipu_dp_init color key change to yuv fmt 0x%x!\n", |
| color_key); |
| } |
| |
| ipu_dp_csc_setup(dp, dp_csc_array[bg_csc_type][fg_csc_type], 1); |
| |
| return 0; |
| } |
| |
| void ipu_dp_uninit(ipu_channel_t channel) |
| { |
| int dp; |
| int partial = 0; |
| |
| if (channel == MEM_FG_SYNC) { |
| dp = DP_SYNC; |
| partial = 1; |
| } else if (channel == MEM_BG_SYNC) { |
| dp = DP_SYNC; |
| partial = 0; |
| } else if (channel == MEM_BG_ASYNC0) { |
| dp = DP_ASYNC0; |
| partial = 0; |
| } else { |
| return; |
| } |
| |
| if (partial) |
| fg_csc_type = CSC_NONE; |
| else |
| bg_csc_type = CSC_NONE; |
| |
| ipu_dp_csc_setup(dp, dp_csc_array[bg_csc_type][fg_csc_type], 0); |
| } |
| |
| void ipu_dc_init(int dc_chan, int di, unsigned char interlaced) |
| { |
| u32 reg = 0; |
| |
| if ((dc_chan == 1) || (dc_chan == 5)) { |
| if (interlaced) { |
| ipu_dc_link_event(dc_chan, DC_EVT_NL, 0, 3); |
| ipu_dc_link_event(dc_chan, DC_EVT_EOL, 0, 2); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, 0, 1); |
| } else { |
| if (di) { |
| ipu_dc_link_event(dc_chan, DC_EVT_NL, 2, 3); |
| ipu_dc_link_event(dc_chan, DC_EVT_EOL, 3, 2); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, |
| 4, 1); |
| } else { |
| ipu_dc_link_event(dc_chan, DC_EVT_NL, 5, 3); |
| ipu_dc_link_event(dc_chan, DC_EVT_EOL, 6, 2); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, |
| 7, 1); |
| } |
| } |
| ipu_dc_link_event(dc_chan, DC_EVT_NF, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NFIELD, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_EOF, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_EOFIELD, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR, 0, 0); |
| |
| reg = 0x2; |
| reg |= DC_DISP_ID_SYNC(di) << DC_WR_CH_CONF_PROG_DISP_ID_OFFSET; |
| reg |= di << 2; |
| if (interlaced) |
| reg |= DC_WR_CH_CONF_FIELD_MODE; |
| } else if ((dc_chan == 8) || (dc_chan == 9)) { |
| /* async channels */ |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_0, 0x64, 1); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_1, 0x64, 1); |
| |
| reg = 0x3; |
| reg |= DC_DISP_ID_SERIAL << DC_WR_CH_CONF_PROG_DISP_ID_OFFSET; |
| } |
| __raw_writel(reg, DC_WR_CH_CONF(dc_chan)); |
| |
| __raw_writel(0x00000000, DC_WR_CH_ADDR(dc_chan)); |
| |
| __raw_writel(0x00000084, DC_GEN); |
| } |
| |
| void ipu_dc_uninit(int dc_chan) |
| { |
| if ((dc_chan == 1) || (dc_chan == 5)) { |
| ipu_dc_link_event(dc_chan, DC_EVT_NL, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_EOL, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NF, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NFIELD, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_EOF, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_EOFIELD, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR, 0, 0); |
| } else if ((dc_chan == 8) || (dc_chan == 9)) { |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_W_0, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_W_1, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_W_0, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_W_1, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_0, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_1, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_R_0, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR_R_1, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_R_0, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN_R_1, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_R_0, 0, 0); |
| ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_R_1, 0, 0); |
| } |
| } |
| |
| void ipu_dp_dc_enable(ipu_channel_t channel) |
| { |
| int di; |
| uint32_t reg; |
| uint32_t dc_chan; |
| |
| if (channel == MEM_DC_SYNC) |
| dc_chan = 1; |
| else if ((channel == MEM_BG_SYNC) || (channel == MEM_FG_SYNC)) |
| dc_chan = 5; |
| else |
| return; |
| |
| if (channel == MEM_FG_SYNC) { |
| /* Enable FG channel */ |
| reg = __raw_readl(DP_COM_CONF()); |
| __raw_writel(reg | DP_COM_CONF_FG_EN, DP_COM_CONF()); |
| |
| reg = __raw_readl(IPU_SRM_PRI2) | 0x8; |
| __raw_writel(reg, IPU_SRM_PRI2); |
| return; |
| } |
| |
| di = g_dc_di_assignment[dc_chan]; |
| |
| /* Make sure other DC sync channel is not assigned same DI */ |
| reg = __raw_readl(DC_WR_CH_CONF(6 - dc_chan)); |
| if ((di << 2) == (reg & DC_WR_CH_CONF_PROG_DI_ID)) { |
| reg &= ~DC_WR_CH_CONF_PROG_DI_ID; |
| reg |= di ? 0 : DC_WR_CH_CONF_PROG_DI_ID; |
| __raw_writel(reg, DC_WR_CH_CONF(6 - dc_chan)); |
| } |
| |
| reg = __raw_readl(DC_WR_CH_CONF(dc_chan)); |
| reg |= 4 << DC_WR_CH_CONF_PROG_TYPE_OFFSET; |
| __raw_writel(reg, DC_WR_CH_CONF(dc_chan)); |
| |
| clk_enable(g_pixel_clk[di]); |
| } |
| |
| static unsigned char dc_swap; |
| |
| void ipu_dp_dc_disable(ipu_channel_t channel, unsigned char swap) |
| { |
| uint32_t reg; |
| uint32_t csc; |
| uint32_t dc_chan = 0; |
| int timeout = 50; |
| int irq = 0; |
| |
| dc_swap = swap; |
| |
| if (channel == MEM_DC_SYNC) { |
| dc_chan = 1; |
| irq = IPU_IRQ_DC_FC_1; |
| } else if (channel == MEM_BG_SYNC) { |
| dc_chan = 5; |
| irq = IPU_IRQ_DP_SF_END; |
| } else if (channel == MEM_FG_SYNC) { |
| /* Disable FG channel */ |
| dc_chan = 5; |
| |
| reg = __raw_readl(DP_COM_CONF()); |
| csc = reg & DP_COM_CONF_CSC_DEF_MASK; |
| if (csc == DP_COM_CONF_CSC_DEF_FG) |
| reg &= ~DP_COM_CONF_CSC_DEF_MASK; |
| |
| reg &= ~DP_COM_CONF_FG_EN; |
| __raw_writel(reg, DP_COM_CONF()); |
| |
| reg = __raw_readl(IPU_SRM_PRI2) | 0x8; |
| __raw_writel(reg, IPU_SRM_PRI2); |
| |
| timeout = 50; |
| |
| /* |
| * Wait for DC triple buffer to empty, |
| * this check is useful for tv overlay. |
| */ |
| if (g_dc_di_assignment[dc_chan] == 0) |
| while ((__raw_readl(DC_STAT) & 0x00000002) |
| != 0x00000002) { |
| udelay(2000); |
| timeout -= 2; |
| if (timeout <= 0) |
| break; |
| } |
| else if (g_dc_di_assignment[dc_chan] == 1) |
| while ((__raw_readl(DC_STAT) & 0x00000020) |
| != 0x00000020) { |
| udelay(2000); |
| timeout -= 2; |
| if (timeout <= 0) |
| break; |
| } |
| return; |
| } else { |
| return; |
| } |
| |
| if (dc_swap) { |
| /* Swap DC channel 1 and 5 settings, and disable old dc chan */ |
| reg = __raw_readl(DC_WR_CH_CONF(dc_chan)); |
| __raw_writel(reg, DC_WR_CH_CONF(6 - dc_chan)); |
| reg &= ~DC_WR_CH_CONF_PROG_TYPE_MASK; |
| reg ^= DC_WR_CH_CONF_PROG_DI_ID; |
| __raw_writel(reg, DC_WR_CH_CONF(dc_chan)); |
| } else { |
| /* Make sure that we leave at the irq starting edge */ |
| __raw_writel(IPUIRQ_2_MASK(irq), IPUIRQ_2_STATREG(irq)); |
| do { |
| reg = __raw_readl(IPUIRQ_2_STATREG(irq)); |
| } while (!(reg & IPUIRQ_2_MASK(irq))); |
| |
| reg = __raw_readl(DC_WR_CH_CONF(dc_chan)); |
| reg &= ~DC_WR_CH_CONF_PROG_TYPE_MASK; |
| __raw_writel(reg, DC_WR_CH_CONF(dc_chan)); |
| |
| reg = __raw_readl(IPU_DISP_GEN); |
| if (g_dc_di_assignment[dc_chan]) |
| reg &= ~DI1_COUNTER_RELEASE; |
| else |
| reg &= ~DI0_COUNTER_RELEASE; |
| __raw_writel(reg, IPU_DISP_GEN); |
| |
| /* Clock is already off because it must be done quickly, but |
| we need to fix the ref count */ |
| clk_disable(g_pixel_clk[g_dc_di_assignment[dc_chan]]); |
| } |
| } |
| |
| void ipu_init_dc_mappings(void) |
| { |
| /* IPU_PIX_FMT_RGB24 */ |
| ipu_dc_map_clear(0); |
| ipu_dc_map_config(0, 0, 7, 0xFF); |
| ipu_dc_map_config(0, 1, 15, 0xFF); |
| ipu_dc_map_config(0, 2, 23, 0xFF); |
| |
| /* IPU_PIX_FMT_RGB666 */ |
| ipu_dc_map_clear(1); |
| ipu_dc_map_config(1, 0, 5, 0xFC); |
| ipu_dc_map_config(1, 1, 11, 0xFC); |
| ipu_dc_map_config(1, 2, 17, 0xFC); |
| |
| /* IPU_PIX_FMT_YUV444 */ |
| ipu_dc_map_clear(2); |
| ipu_dc_map_config(2, 0, 15, 0xFF); |
| ipu_dc_map_config(2, 1, 23, 0xFF); |
| ipu_dc_map_config(2, 2, 7, 0xFF); |
| |
| /* IPU_PIX_FMT_RGB565 */ |
| ipu_dc_map_clear(3); |
| ipu_dc_map_config(3, 0, 4, 0xF8); |
| ipu_dc_map_config(3, 1, 10, 0xFC); |
| ipu_dc_map_config(3, 2, 15, 0xF8); |
| |
| /* IPU_PIX_FMT_LVDS666 */ |
| ipu_dc_map_clear(4); |
| ipu_dc_map_config(4, 0, 5, 0xFC); |
| ipu_dc_map_config(4, 1, 13, 0xFC); |
| ipu_dc_map_config(4, 2, 21, 0xFC); |
| } |
| |
| static int ipu_pixfmt_to_map(uint32_t fmt) |
| { |
| switch (fmt) { |
| case IPU_PIX_FMT_GENERIC: |
| case IPU_PIX_FMT_RGB24: |
| return 0; |
| case IPU_PIX_FMT_RGB666: |
| return 1; |
| case IPU_PIX_FMT_YUV444: |
| return 2; |
| case IPU_PIX_FMT_RGB565: |
| return 3; |
| case IPU_PIX_FMT_LVDS666: |
| return 4; |
| } |
| |
| return -1; |
| } |
| |
| /* |
| * This function is called to initialize a synchronous LCD panel. |
| * |
| * @param disp The DI the panel is attached to. |
| * |
| * @param pixel_clk Desired pixel clock frequency in Hz. |
| * |
| * @param pixel_fmt Input parameter for pixel format of buffer. |
| * Pixel format is a FOURCC ASCII code. |
| * |
| * @param width The width of panel in pixels. |
| * |
| * @param height The height of panel in pixels. |
| * |
| * @param hStartWidth The number of pixel clocks between the HSYNC |
| * signal pulse and the start of valid data. |
| * |
| * @param hSyncWidth The width of the HSYNC signal in units of pixel |
| * clocks. |
| * |
| * @param hEndWidth The number of pixel clocks between the end of |
| * valid data and the HSYNC signal for next line. |
| * |
| * @param vStartWidth The number of lines between the VSYNC |
| * signal pulse and the start of valid data. |
| * |
| * @param vSyncWidth The width of the VSYNC signal in units of lines |
| * |
| * @param vEndWidth The number of lines between the end of valid |
| * data and the VSYNC signal for next frame. |
| * |
| * @param sig Bitfield of signal polarities for LCD interface. |
| * |
| * Return: This function returns 0 on success or negative error code on |
| * fail. |
| */ |
| |
| int32_t ipu_init_sync_panel(int disp, uint32_t pixel_clk, |
| uint16_t width, uint16_t height, |
| uint32_t pixel_fmt, |
| uint16_t h_start_width, uint16_t h_sync_width, |
| uint16_t h_end_width, uint16_t v_start_width, |
| uint16_t v_sync_width, uint16_t v_end_width, |
| uint32_t v_to_h_sync, ipu_di_signal_cfg_t sig) |
| { |
| uint32_t reg; |
| uint32_t di_gen, vsync_cnt; |
| uint32_t div, rounded_pixel_clk; |
| uint32_t h_total, v_total; |
| int map; |
| struct clk *di_parent; |
| |
| debug("panel size = %d x %d\n", width, height); |
| |
| if ((v_sync_width == 0) || (h_sync_width == 0)) |
| return -EINVAL; |
| |
| /* adapt panel to ipu restricitions */ |
| if (v_end_width < 2) { |
| v_end_width = 2; |
| puts("WARNING: v_end_width (lower_margin) must be >= 2, adjusted\n"); |
| } |
| |
| h_total = width + h_sync_width + h_start_width + h_end_width; |
| v_total = height + v_sync_width + v_start_width + v_end_width; |
| |
| /* Init clocking */ |
| debug("pixel clk = %dHz\n", pixel_clk); |
| |
| if (sig.ext_clk) { |
| if (!(g_di1_tvout && (disp == 1))) { /*not round div for tvout*/ |
| /* |
| * Set the PLL to be an even multiple |
| * of the pixel clock. |
| */ |
| if ((clk_get_usecount(g_pixel_clk[0]) == 0) && |
| (clk_get_usecount(g_pixel_clk[1]) == 0)) { |
| di_parent = clk_get_parent(g_di_clk[disp]); |
| rounded_pixel_clk = |
| clk_round_rate(g_pixel_clk[disp], |
| pixel_clk); |
| div = clk_get_rate(di_parent) / |
| rounded_pixel_clk; |
| if (div % 2) |
| div++; |
| if (clk_get_rate(di_parent) != div * |
| rounded_pixel_clk) |
| clk_set_rate(di_parent, |
| div * rounded_pixel_clk); |
| udelay(10000); |
| clk_set_rate(g_di_clk[disp], |
| 2 * rounded_pixel_clk); |
| udelay(10000); |
| } |
| } |
| clk_set_parent(g_pixel_clk[disp], g_ldb_clk); |
| } else { |
| if (clk_get_usecount(g_pixel_clk[disp]) != 0) |
| clk_set_parent(g_pixel_clk[disp], g_ipu_clk); |
| } |
| rounded_pixel_clk = clk_round_rate(g_pixel_clk[disp], pixel_clk); |
| clk_set_rate(g_pixel_clk[disp], rounded_pixel_clk); |
| udelay(5000); |
| /* Get integer portion of divider */ |
| div = clk_get_rate(clk_get_parent(g_pixel_clk[disp])) / |
| rounded_pixel_clk; |
| |
| ipu_di_data_wave_config(disp, SYNC_WAVE, div - 1, div - 1); |
| ipu_di_data_pin_config(disp, SYNC_WAVE, DI_PIN15, 3, 0, div * 2); |
| |
| map = ipu_pixfmt_to_map(pixel_fmt); |
| if (map < 0) { |
| debug("IPU_DISP: No MAP\n"); |
| return -EINVAL; |
| } |
| |
| di_gen = __raw_readl(DI_GENERAL(disp)); |
| |
| if (sig.interlaced) { |
| /* Setup internal HSYNC waveform */ |
| ipu_di_sync_config( |
| disp, /* display */ |
| 1, /* counter */ |
| h_total / 2 - 1,/* run count */ |
| DI_SYNC_CLK, /* run_resolution */ |
| 0, /* offset */ |
| DI_SYNC_NONE, /* offset resolution */ |
| 0, /* repeat count */ |
| DI_SYNC_NONE, /* CNT_CLR_SEL */ |
| 0, /* CNT_POLARITY_GEN_EN */ |
| DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ |
| DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ |
| 0, /* COUNT UP */ |
| 0 /* COUNT DOWN */ |
| ); |
| |
| /* Field 1 VSYNC waveform */ |
| ipu_di_sync_config( |
| disp, /* display */ |
| 2, /* counter */ |
| h_total - 1, /* run count */ |
| DI_SYNC_CLK, /* run_resolution */ |
| 0, /* offset */ |
| DI_SYNC_NONE, /* offset resolution */ |
| 0, /* repeat count */ |
| DI_SYNC_NONE, /* CNT_CLR_SEL */ |
| 0, /* CNT_POLARITY_GEN_EN */ |
| DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ |
| DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ |
| 0, /* COUNT UP */ |
| 4 /* COUNT DOWN */ |
| ); |
| |
| /* Setup internal HSYNC waveform */ |
| ipu_di_sync_config( |
| disp, /* display */ |
| 3, /* counter */ |
| v_total * 2 - 1,/* run count */ |
| DI_SYNC_INT_HSYNC, /* run_resolution */ |
| 1, /* offset */ |
| DI_SYNC_INT_HSYNC, /* offset resolution */ |
| 0, /* repeat count */ |
| DI_SYNC_NONE, /* CNT_CLR_SEL */ |
| 0, /* CNT_POLARITY_GEN_EN */ |
| DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ |
| DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ |
| 0, /* COUNT UP */ |
| 4 /* COUNT DOWN */ |
| ); |
| |
| /* Active Field ? */ |
| ipu_di_sync_config( |
| disp, /* display */ |
| 4, /* counter */ |
| v_total / 2 - 1,/* run count */ |
| DI_SYNC_HSYNC, /* run_resolution */ |
| v_start_width, /* offset */ |
| DI_SYNC_HSYNC, /* offset resolution */ |
| 2, /* repeat count */ |
| DI_SYNC_VSYNC, /* CNT_CLR_SEL */ |
| 0, /* CNT_POLARITY_GEN_EN */ |
| DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ |
| DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ |
| 0, /* COUNT UP */ |
| 0 /* COUNT DOWN */ |
| ); |
| |
| /* Active Line */ |
| ipu_di_sync_config( |
| disp, /* display */ |
| 5, /* counter */ |
| 0, /* run count */ |
| DI_SYNC_HSYNC, /* run_resolution */ |
| 0, /* offset */ |
| DI_SYNC_NONE, /* offset resolution */ |
| height / 2, /* repeat count */ |
| 4, /* CNT_CLR_SEL */ |
| 0, /* CNT_POLARITY_GEN_EN */ |
| DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ |
| DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ |
| 0, /* COUNT UP */ |
| 0 /* COUNT DOWN */ |
| ); |
| |
| /* Field 0 VSYNC waveform */ |
| ipu_di_sync_config( |
| disp, /* display */ |
| 6, /* counter */ |
| v_total - 1, /* run count */ |
| DI_SYNC_HSYNC, /* run_resolution */ |
| 0, /* offset */ |
| DI_SYNC_NONE, /* offset resolution */ |
| 0, /* repeat count */ |
| DI_SYNC_NONE, /* CNT_CLR_SEL */ |
| 0, /* CNT_POLARITY_GEN_EN */ |
| DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ |
| DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ |
| 0, /* COUNT UP */ |
| 0 /* COUNT DOWN */ |
| ); |
| |
| /* DC VSYNC waveform */ |
| vsync_cnt = 7; |
| ipu_di_sync_config( |
| disp, /* display */ |
| 7, /* counter */ |
| v_total / 2 - 1,/* run count */ |
| DI_SYNC_HSYNC, /* run_resolution */ |
| 9, /* offset */ |
| DI_SYNC_HSYNC, /* offset resolution */ |
| 2, /* repeat count */ |
| DI_SYNC_VSYNC, /* CNT_CLR_SEL */ |
| 0, /* CNT_POLARITY_GEN_EN */ |
| DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ |
| DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ |
| 0, /* COUNT UP */ |
| 0 /* COUNT DOWN */ |
| ); |
| |
| /* active pixel waveform */ |
| ipu_di_sync_config( |
| disp, /* display */ |
| 8, /* counter */ |
| 0, /* run count */ |
| DI_SYNC_CLK, /* run_resolution */ |
| h_start_width, /* offset */ |
| DI_SYNC_CLK, /* offset resolution */ |
| width, /* repeat count */ |
| 5, /* CNT_CLR_SEL */ |
| 0, /* CNT_POLARITY_GEN_EN */ |
| DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ |
| DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ |
| 0, /* COUNT UP */ |
| 0 /* COUNT DOWN */ |
| ); |
| |
| ipu_di_sync_config( |
| disp, /* display */ |
| 9, /* counter */ |
| v_total - 1, /* run count */ |
| DI_SYNC_INT_HSYNC,/* run_resolution */ |
| v_total / 2, /* offset */ |
| DI_SYNC_INT_HSYNC,/* offset resolution */ |
| 0, /* repeat count */ |
| DI_SYNC_HSYNC, /* CNT_CLR_SEL */ |
| 0, /* CNT_POLARITY_GEN_EN */ |
| DI_SYNC_NONE, /* CNT_POLARITY_CLR_SEL */ |
| DI_SYNC_NONE, /* CNT_POLARITY_TRIGGER_SEL */ |
| 0, /* COUNT UP */ |
| 4 /* COUNT DOWN */ |
| ); |
| |
| /* set gentime select and tag sel */ |
| reg = __raw_readl(DI_SW_GEN1(disp, 9)); |
| reg &= 0x1FFFFFFF; |
| reg |= (3 - 1)<<29 | 0x00008000; |
| __raw_writel(reg, DI_SW_GEN1(disp, 9)); |
| |
| __raw_writel(v_total / 2 - 1, DI_SCR_CONF(disp)); |
| |
| /* set y_sel = 1 */ |
| di_gen |= 0x10000000; |
| di_gen |= DI_GEN_POLARITY_5; |
| di_gen |= DI_GEN_POLARITY_8; |
| } else { |
| /* Setup internal HSYNC waveform */ |
| ipu_di_sync_config(disp, 1, h_total - 1, DI_SYNC_CLK, |
| 0, DI_SYNC_NONE, 0, DI_SYNC_NONE, |
| 0, DI_SYNC_NONE, |
| DI_SYNC_NONE, 0, 0); |
| |
| /* Setup external (delayed) HSYNC waveform */ |
| ipu_di_sync_config(disp, DI_SYNC_HSYNC, h_total - 1, |
| DI_SYNC_CLK, div * v_to_h_sync, DI_SYNC_CLK, |
| 0, DI_SYNC_NONE, 1, DI_SYNC_NONE, |
| DI_SYNC_CLK, 0, h_sync_width * 2); |
| /* Setup VSYNC waveform */ |
| vsync_cnt = DI_SYNC_VSYNC; |
| ipu_di_sync_config(disp, DI_SYNC_VSYNC, v_total - 1, |
| DI_SYNC_INT_HSYNC, 0, DI_SYNC_NONE, 0, |
| DI_SYNC_NONE, 1, DI_SYNC_NONE, |
| DI_SYNC_INT_HSYNC, 0, v_sync_width * 2); |
| __raw_writel(v_total - 1, DI_SCR_CONF(disp)); |
| |
| /* Setup active data waveform to sync with DC */ |
| ipu_di_sync_config(disp, 4, 0, DI_SYNC_HSYNC, |
| v_sync_width + v_start_width, DI_SYNC_HSYNC, |
| height, |
| DI_SYNC_VSYNC, 0, DI_SYNC_NONE, |
| DI_SYNC_NONE, 0, 0); |
| ipu_di_sync_config(disp, 5, 0, DI_SYNC_CLK, |
| h_sync_width + h_start_width, DI_SYNC_CLK, |
| width, 4, 0, DI_SYNC_NONE, DI_SYNC_NONE, 0, |
| 0); |
| |
| /* reset all unused counters */ |
| __raw_writel(0, DI_SW_GEN0(disp, 6)); |
| __raw_writel(0, DI_SW_GEN1(disp, 6)); |
| __raw_writel(0, DI_SW_GEN0(disp, 7)); |
| __raw_writel(0, DI_SW_GEN1(disp, 7)); |
| __raw_writel(0, DI_SW_GEN0(disp, 8)); |
| __raw_writel(0, DI_SW_GEN1(disp, 8)); |
| __raw_writel(0, DI_SW_GEN0(disp, 9)); |
| __raw_writel(0, DI_SW_GEN1(disp, 9)); |
| |
| reg = __raw_readl(DI_STP_REP(disp, 6)); |
| reg &= 0x0000FFFF; |
| __raw_writel(reg, DI_STP_REP(disp, 6)); |
| __raw_writel(0, DI_STP_REP(disp, 7)); |
| __raw_writel(0, DI_STP_REP9(disp)); |
| |
| /* Init template microcode */ |
| if (disp) { |
| ipu_dc_write_tmpl(2, WROD(0), 0, map, SYNC_WAVE, 8, 5); |
| ipu_dc_write_tmpl(3, WROD(0), 0, map, SYNC_WAVE, 4, 5); |
| ipu_dc_write_tmpl(4, WROD(0), 0, map, SYNC_WAVE, 0, 5); |
| } else { |
| ipu_dc_write_tmpl(5, WROD(0), 0, map, SYNC_WAVE, 8, 5); |
| ipu_dc_write_tmpl(6, WROD(0), 0, map, SYNC_WAVE, 4, 5); |
| ipu_dc_write_tmpl(7, WROD(0), 0, map, SYNC_WAVE, 0, 5); |
| } |
| |
| if (sig.Hsync_pol) |
| di_gen |= DI_GEN_POLARITY_2; |
| if (sig.Vsync_pol) |
| di_gen |= DI_GEN_POLARITY_3; |
| |
| if (!sig.clk_pol) |
| di_gen |= DI_GEN_POL_CLK; |
| |
| } |
| |
| __raw_writel(di_gen, DI_GENERAL(disp)); |
| |
| __raw_writel((--vsync_cnt << DI_VSYNC_SEL_OFFSET) | |
| 0x00000002, DI_SYNC_AS_GEN(disp)); |
| |
| reg = __raw_readl(DI_POL(disp)); |
| reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15); |
| if (sig.enable_pol) |
| reg |= DI_POL_DRDY_POLARITY_15; |
| if (sig.data_pol) |
| reg |= DI_POL_DRDY_DATA_POLARITY; |
| __raw_writel(reg, DI_POL(disp)); |
| |
| __raw_writel(width, DC_DISP_CONF2(DC_DISP_ID_SYNC(disp))); |
| |
| return 0; |
| } |
| |
| /* |
| * This function sets the foreground and background plane global alpha blending |
| * modes. This function also sets the DP graphic plane according to the |
| * parameter of IPUv3 DP channel. |
| * |
| * @param channel IPUv3 DP channel |
| * |
| * @param enable Boolean to enable or disable global alpha |
| * blending. If disabled, local blending is used. |
| * |
| * @param alpha Global alpha value. |
| * |
| * Return: Returns 0 on success or negative error code on fail |
| */ |
| int32_t ipu_disp_set_global_alpha(ipu_channel_t channel, unsigned char enable, |
| uint8_t alpha) |
| { |
| uint32_t reg; |
| |
| unsigned char bg_chan; |
| |
| if (!((channel == MEM_BG_SYNC || channel == MEM_FG_SYNC) || |
| (channel == MEM_BG_ASYNC0 || channel == MEM_FG_ASYNC0) || |
| (channel == MEM_BG_ASYNC1 || channel == MEM_FG_ASYNC1))) |
| return -EINVAL; |
| |
| if (channel == MEM_BG_SYNC || channel == MEM_BG_ASYNC0 || |
| channel == MEM_BG_ASYNC1) |
| bg_chan = 1; |
| else |
| bg_chan = 0; |
| |
| if (bg_chan) { |
| reg = __raw_readl(DP_COM_CONF()); |
| __raw_writel(reg & ~DP_COM_CONF_GWSEL, DP_COM_CONF()); |
| } else { |
| reg = __raw_readl(DP_COM_CONF()); |
| __raw_writel(reg | DP_COM_CONF_GWSEL, DP_COM_CONF()); |
| } |
| |
| if (enable) { |
| reg = __raw_readl(DP_GRAPH_WIND_CTRL()) & 0x00FFFFFFL; |
| __raw_writel(reg | ((uint32_t) alpha << 24), |
| DP_GRAPH_WIND_CTRL()); |
| |
| reg = __raw_readl(DP_COM_CONF()); |
| __raw_writel(reg | DP_COM_CONF_GWAM, DP_COM_CONF()); |
| } else { |
| reg = __raw_readl(DP_COM_CONF()); |
| __raw_writel(reg & ~DP_COM_CONF_GWAM, DP_COM_CONF()); |
| } |
| |
| reg = __raw_readl(IPU_SRM_PRI2) | 0x8; |
| __raw_writel(reg, IPU_SRM_PRI2); |
| |
| return 0; |
| } |
| |
| /* |
| * This function sets the transparent color key for SDC graphic plane. |
| * |
| * @param channel Input parameter for the logical channel ID. |
| * |
| * @param enable Boolean to enable or disable color key |
| * |
| * @param colorKey 24-bit RGB color for transparent color key. |
| * |
| * Return: Returns 0 on success or negative error code on fail |
| */ |
| int32_t ipu_disp_set_color_key(ipu_channel_t channel, unsigned char enable, |
| uint32_t color_key) |
| { |
| uint32_t reg; |
| int y, u, v; |
| int red, green, blue; |
| |
| if (!((channel == MEM_BG_SYNC || channel == MEM_FG_SYNC) || |
| (channel == MEM_BG_ASYNC0 || channel == MEM_FG_ASYNC0) || |
| (channel == MEM_BG_ASYNC1 || channel == MEM_FG_ASYNC1))) |
| return -EINVAL; |
| |
| color_key_4rgb = 1; |
| /* Transform color key from rgb to yuv if CSC is enabled */ |
| if (((fg_csc_type == RGB2YUV) && (bg_csc_type == YUV2YUV)) || |
| ((fg_csc_type == YUV2YUV) && (bg_csc_type == RGB2YUV)) || |
| ((fg_csc_type == YUV2YUV) && (bg_csc_type == YUV2YUV)) || |
| ((fg_csc_type == YUV2RGB) && (bg_csc_type == YUV2RGB))) { |
| |
| debug("color key 0x%x need change to yuv fmt\n", color_key); |
| |
| red = (color_key >> 16) & 0xFF; |
| green = (color_key >> 8) & 0xFF; |
| blue = color_key & 0xFF; |
| |
| y = rgb_to_yuv(0, red, green, blue); |
| u = rgb_to_yuv(1, red, green, blue); |
| v = rgb_to_yuv(2, red, green, blue); |
| color_key = (y << 16) | (u << 8) | v; |
| |
| color_key_4rgb = 0; |
| |
| debug("color key change to yuv fmt 0x%x\n", color_key); |
| } |
| |
| if (enable) { |
| reg = __raw_readl(DP_GRAPH_WIND_CTRL()) & 0xFF000000L; |
| __raw_writel(reg | color_key, DP_GRAPH_WIND_CTRL()); |
| |
| reg = __raw_readl(DP_COM_CONF()); |
| __raw_writel(reg | DP_COM_CONF_GWCKE, DP_COM_CONF()); |
| } else { |
| reg = __raw_readl(DP_COM_CONF()); |
| __raw_writel(reg & ~DP_COM_CONF_GWCKE, DP_COM_CONF()); |
| } |
| |
| reg = __raw_readl(IPU_SRM_PRI2) | 0x8; |
| __raw_writel(reg, IPU_SRM_PRI2); |
| |
| return 0; |
| } |