| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2002-2010 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| */ |
| |
| #ifndef __ASM_GBL_DATA_H |
| #define __ASM_GBL_DATA_H |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <asm/processor.h> |
| |
| enum pei_boot_mode_t { |
| PEI_BOOT_NONE = 0, |
| PEI_BOOT_SOFT_RESET, |
| PEI_BOOT_RESUME, |
| |
| }; |
| |
| struct dimm_info { |
| uint32_t dimm_size; |
| uint16_t ddr_type; |
| uint16_t ddr_frequency; |
| uint8_t rank_per_dimm; |
| uint8_t channel_num; |
| uint8_t dimm_num; |
| uint8_t bank_locator; |
| /* The 5th byte is '\0' for the end of string */ |
| uint8_t serial[5]; |
| /* The 19th byte is '\0' for the end of string */ |
| uint8_t module_part_number[19]; |
| uint16_t mod_id; |
| uint8_t mod_type; |
| uint8_t bus_width; |
| } __packed; |
| |
| struct pei_memory_info { |
| uint8_t dimm_cnt; |
| /* Maximum num of dimm is 8 */ |
| struct dimm_info dimm[8]; |
| } __packed; |
| |
| struct memory_area { |
| uint64_t start; |
| uint64_t size; |
| }; |
| |
| struct memory_info { |
| int num_areas; |
| uint64_t total_memory; |
| uint64_t total_32bit_memory; |
| struct memory_area area[CONFIG_NR_DRAM_BANKS]; |
| }; |
| |
| #define MAX_MTRR_REQUESTS 8 |
| |
| /** |
| * A request for a memory region to be set up in a particular way. These |
| * requests are processed before board_init_r() is called. They are generally |
| * optional and can be ignored with some performance impact. |
| */ |
| struct mtrr_request { |
| int type; /* MTRR_TYPE_... */ |
| uint64_t start; |
| uint64_t size; |
| }; |
| |
| /* Architecture-specific global data */ |
| struct arch_global_data { |
| u64 gdt[X86_GDT_NUM_ENTRIES] __aligned(16); |
| struct global_data *gd_addr; /* Location of Global Data */ |
| uint8_t x86; /* CPU family */ |
| uint8_t x86_vendor; /* CPU vendor */ |
| uint8_t x86_model; |
| uint8_t x86_mask; |
| uint32_t x86_device; |
| uint64_t tsc_base; /* Initial value returned by rdtsc() */ |
| bool tsc_inited; /* true if tsc is ready for use */ |
| unsigned long clock_rate; /* Clock rate of timer in Hz */ |
| void *new_fdt; /* Relocated FDT */ |
| uint32_t bist; /* Built-in self test value */ |
| enum pei_boot_mode_t pei_boot_mode; |
| const struct pch_gpio_map *gpio_map; /* board GPIO map */ |
| struct memory_info meminfo; /* Memory information */ |
| struct pei_memory_info pei_meminfo; /* PEI memory information */ |
| #ifdef CONFIG_USE_HOB |
| void *hob_list; /* FSP HOB list */ |
| #endif |
| struct mtrr_request mtrr_req[MAX_MTRR_REQUESTS]; |
| int mtrr_req_count; |
| int has_mtrr; |
| /* MRC training data to save for the next boot */ |
| char *mrc_output; |
| unsigned int mrc_output_len; |
| ulong table; /* Table pointer from previous loader */ |
| int turbo_state; /* Current turbo state */ |
| struct irq_routing_table *pirq_routing_table; |
| #ifdef CONFIG_SEABIOS |
| u32 high_table_ptr; |
| u32 high_table_limit; |
| #endif |
| #ifdef CONFIG_HAVE_ACPI_RESUME |
| int prev_sleep_state; /* Previous sleep state ACPI_S0/1../5 */ |
| ulong backup_mem; /* Backup memory address for S3 */ |
| #endif |
| }; |
| |
| #endif |
| |
| #include <asm-generic/global_data.h> |
| |
| #ifndef __ASSEMBLY__ |
| # if defined(CONFIG_EFI_APP) || CONFIG_IS_ENABLED(X86_64) |
| |
| /* TODO(sjg@chromium.org): Consider using a fixed register for gd on x86_64 */ |
| #define gd global_data_ptr |
| |
| #define DECLARE_GLOBAL_DATA_PTR extern struct global_data *global_data_ptr |
| # else |
| static inline __attribute__((no_instrument_function)) gd_t *get_fs_gd_ptr(void) |
| { |
| gd_t *gd_ptr; |
| |
| #if CONFIG_IS_ENABLED(X86_64) |
| asm volatile("fs mov 0, %0\n" : "=r" (gd_ptr)); |
| #else |
| asm volatile("fs movl 0, %0\n" : "=r" (gd_ptr)); |
| #endif |
| |
| return gd_ptr; |
| } |
| |
| #define gd get_fs_gd_ptr() |
| |
| #define DECLARE_GLOBAL_DATA_PTR |
| # endif |
| |
| #endif |
| |
| #endif /* __ASM_GBL_DATA_H */ |