include/configs/colibri_vf.h - filogic/uboot - Gitiles

 /*
  * Copyright 2015 Toradex, Inc.
  *
  * Configuration settings for the Toradex VF50/VF61 module.
  *
  * Based on vf610twr.h:
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include <asm/arch/imx-regs.h>

 #define CONFIG_VF610
 #define CONFIG_SYS_THUMB_BUILD
 #define CONFIG_USE_ARCH_MEMCPY
 #define CONFIG_USE_ARCH_MEMSET
 #define CONFIG_SYS_FSL_CLK

 #define CONFIG_ARCH_MISC_INIT
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO

 #define CONFIG_SKIP_LOWLEVEL_INIT

 #define CONFIG_CMD_FUSE
 #ifdef CONFIG_CMD_FUSE
 #define CONFIG_MXC_OCOTP
 #endif

 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

 #define CONFIG_BOARD_EARLY_INIT_F

 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_BAUDRATE			115200

 /* NAND support */
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR

 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT		"nand0=vf610_nfc"
 #define MTDPARTS_DEFAULT	"mtdparts=vf610_nfc:"		\
 				"128k(vf-bcb)ro,"		\
 				"1408k(u-boot)ro,"		\
 				"512k(u-boot-env),"		\
 				"-(ubi)"

 #define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1

 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111

 #define CONFIG_GENERIC_MMC
 #define CONFIG_DOS_PARTITION

 #define CONFIG_RBTREE
 #define CONFIG_LZO
 #define CONFIG_CMD_UBI
 #define CONFIG_MTD_UBI_FASTMAP
 #define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */

 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET1_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RMII
 #define CONFIG_FEC_MXC_PHYADDR          0
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL

 #define CONFIG_IPADDR		192.168.10.2
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_SERVERIP		192.168.10.1

 #define CONFIG_BOARD_LATE_INIT

 #define CONFIG_LOADADDR			0x80008000
 #define CONFIG_FDTADDR			0x84000000

 /* We boot from the gfxRAM area of the OCRAM. */
 #define CONFIG_SYS_TEXT_BASE		0x3f408000
 #define CONFIG_BOARD_SIZE_LIMIT		524288

 #define SD_BOOTCMD \
 	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
 	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
 	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
 	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
 	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
 	"nfsboot=run setup; " \
 	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
 	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
 	"dhcp ${kernel_addr_r} && "	\
 	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

 #define UBI_BOOTCMD	\
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 	"ubi.fm_autoconvert=1\0" \
 	"ubiboot=run setup; " \
 	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
 	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
 	"ubi part ubi && ubifsmount ubi0:rootfs && " \
 	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
 	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
 	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"

 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"kernel_addr_r=0x82000000\0" \
 	"fdt_addr_r=0x84000000\0" \
 	"kernel_file=zImage\0" \
 	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 	"fdt_board=eval-v3\0" \
 	"defargs=\0" \
 	"console=ttyLP0\0" \
 	"setup=setenv setupargs " \
 	"console=tty1 console=${console}" \
 	",${baudrate}n8 ${memargs}\0" \
 	"setsdupdate=mmc rescan && set interface mmc && " \
 	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 	"source ${loadaddr}\0" \
 	"setusbupdate=usb start && set interface usb && " \
 	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 	"source ${loadaddr}\0" \
 	"setupdate=run setsdupdate || run setusbupdate\0" \
 	"mtdparts=" MTDPARTS_DEFAULT "\0" \
 	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 	SD_BOOTCMD \
 	NFS_BOOTCMD \
 	UBI_BOOTCMD

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #undef CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		\
 			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

 #define CONFIG_SYS_MEMTEST_START	0x80010000
 #define CONFIG_SYS_MEMTEST_END		0x87C00000

 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_CMDLINE_EDITING

 /*
  * Stack sizes
  * The stack sizes are set up in start.S using the settings below
  */
 #define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */

 /* Physical memory map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			(0x80000000)
 #define PHYS_SDRAM_SIZE			(256 * 1024 * 1024)

 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /* Environment organization */
 #define CONFIG_SYS_NO_FLASH

 #ifdef CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
 #define CONFIG_ENV_SIZE			(8 * 1024)
 #endif

 #ifdef CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE			(64 * 2048)
 #define CONFIG_ENV_RANGE		(4 * 64 * 2048)
 #define CONFIG_ENV_OFFSET		(12 * 64 * 2048)
 #endif

 #define CONFIG_SYS_NO_FLASH

 /* USB Host Support */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_VF
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET

 /* USB Client Support */
 #define CONFIG_TRDX_VID                  0x1B67
 #define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
 #define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
 #define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
 #define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019

 /* USB DFU */
 #define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_NAND
 #define CONFIG_DFU_MMC
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)

 /* USB Storage */
 #define CONFIG_USB_FUNCTION_MASS_STORAGE

 #endif /* __CONFIG_H */
	/*
	* Copyright 2015 Toradex, Inc.
	*
	* Configuration settings for the Toradex VF50/VF61 module.
	*
	* Based on vf610twr.h:
	* Copyright 2013 Freescale Semiconductor, Inc.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include <asm/arch/imx-regs.h>

	#define CONFIG_VF610
	#define CONFIG_SYS_THUMB_BUILD
	#define CONFIG_USE_ARCH_MEMCPY
	#define CONFIG_USE_ARCH_MEMSET
	#define CONFIG_SYS_FSL_CLK

	#define CONFIG_ARCH_MISC_INIT
	#define CONFIG_DISPLAY_CPUINFO
	#define CONFIG_DISPLAY_BOARDINFO

	#define CONFIG_SKIP_LOWLEVEL_INIT

	#define CONFIG_CMD_FUSE
	#ifdef CONFIG_CMD_FUSE
	#define CONFIG_MXC_OCOTP
	#endif

	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)

	#define CONFIG_BOARD_EARLY_INIT_F

	/* Allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE
	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	#define CONFIG_VERSION_VARIABLE
	#define CONFIG_BAUDRATE 115200

	/* NAND support */
	#define CONFIG_CMD_NAND
	#define CONFIG_SYS_NAND_ONFI_DETECTION
	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR

	/* Dynamic MTD partition support */
	#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
	#define CONFIG_MTD_PARTITIONS
	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	#define MTDIDS_DEFAULT "nand0=vf610_nfc"
	#define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
	"128k(vf-bcb)ro," \
	"1408k(u-boot)ro," \
	"512k(u-boot-env)," \
	"-(ubi)"

	#define CONFIG_MMC
	#define CONFIG_FSL_ESDHC
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	#define CONFIG_SYS_FSL_ESDHC_NUM 1

	#define CONFIG_SYS_FSL_ERRATUM_ESDHC111

	#define CONFIG_GENERIC_MMC
	#define CONFIG_DOS_PARTITION

	#define CONFIG_RBTREE
	#define CONFIG_LZO
	#define CONFIG_CMD_UBI
	#define CONFIG_MTD_UBI_FASTMAP
	#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */

	#define CONFIG_FEC_MXC
	#define CONFIG_MII
	#define IMX_FEC_BASE ENET1_BASE_ADDR
	#define CONFIG_FEC_XCV_TYPE RMII
	#define CONFIG_FEC_MXC_PHYADDR 0
	#define CONFIG_PHYLIB
	#define CONFIG_PHY_MICREL

	#define CONFIG_IPADDR 192.168.10.2
	#define CONFIG_NETMASK 255.255.255.0
	#define CONFIG_SERVERIP 192.168.10.1

	#define CONFIG_BOARD_LATE_INIT

	#define CONFIG_LOADADDR 0x80008000
	#define CONFIG_FDTADDR 0x84000000

	/* We boot from the gfxRAM area of the OCRAM. */
	#define CONFIG_SYS_TEXT_BASE 0x3f408000
	#define CONFIG_BOARD_SIZE_LIMIT 524288

	#define SD_BOOTCMD \
	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

	#define NFS_BOOTCMD \
	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
	"nfsboot=run setup; " \
	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	"dhcp ${kernel_addr_r} && " \
	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

	#define UBI_BOOTCMD \
	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	"ubi.fm_autoconvert=1\0" \
	"ubiboot=run setup; " \
	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
	"ubi part ubi && ubifsmount ubi0:rootfs && " \
	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

	#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"

	#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel_addr_r=0x82000000\0" \
	"fdt_addr_r=0x84000000\0" \
	"kernel_file=zImage\0" \
	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
	"fdt_board=eval-v3\0" \
	"defargs=\0" \
	"console=ttyLP0\0" \
	"setup=setenv setupargs " \
	"console=tty1 console=${console}" \
	",${baudrate}n8 ${memargs}\0" \
	"setsdupdate=mmc rescan && set interface mmc && " \
	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setusbupdate=usb start && set interface usb && " \
	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setupdate=run setsdupdate \|\| run setusbupdate\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
	SD_BOOTCMD \
	NFS_BOOTCMD \
	UBI_BOOTCMD

	/* Miscellaneous configurable options */
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#undef CONFIG_AUTO_COMPLETE
	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	#define CONFIG_SYS_PBSIZE \
	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

	#define CONFIG_SYS_MEMTEST_START 0x80010000
	#define CONFIG_SYS_MEMTEST_END 0x87C00000

	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	#define CONFIG_SYS_HZ 1000
	#define CONFIG_CMDLINE_EDITING

	/*
	* Stack sizes
	* The stack sizes are set up in start.S using the settings below
	*/
	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */

	/* Physical memory map */
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM (0x80000000)
	#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/* Environment organization */
	#define CONFIG_SYS_NO_FLASH

	#ifdef CONFIG_ENV_IS_IN_MMC
	#define CONFIG_SYS_MMC_ENV_DEV 0
	#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
	#define CONFIG_ENV_SIZE (8 * 1024)
	#endif

	#ifdef CONFIG_ENV_IS_IN_NAND
	#define CONFIG_ENV_SIZE (64 * 2048)
	#define CONFIG_ENV_RANGE (4 * 64 * 2048)
	#define CONFIG_ENV_OFFSET (12 * 64 * 2048)
	#endif

	#define CONFIG_SYS_NO_FLASH

	/* USB Host Support */
	#define CONFIG_USB_EHCI
	#define CONFIG_USB_EHCI_VF
	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

	/* USB Client Support */
	#define CONFIG_TRDX_VID 0x1B67
	#define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016
	#define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017
	#define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018
	#define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019

	/* USB DFU */
	#define CONFIG_USB_FUNCTION_DFU
	#define CONFIG_DFU_NAND
	#define CONFIG_DFU_MMC
	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)

	/* USB Storage */
	#define CONFIG_USB_FUNCTION_MASS_STORAGE

	#endif /* __CONFIG_H */