include/configs/ml300.h - filogic/uboot - Gitiles

 /*
  * ML300.h: ML300 specific config options
  *
  * http://www.xilinx.com/ml300
  *
  * Derived from : ML2.h
  *
  *     Author: Xilinx, Inc.
  *
  *
  *     This program is free software; you can redistribute it and/or modify it
  *     under the terms of the GNU General Public License as published by the
  *     Free Software Foundation; either version 2 of the License, or (at your
  *     option) any later version.
  *
  *
  *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
  *     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
  *     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
  *     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
  *     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR
  *     OBTAINING ANY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
  *     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
  *     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
  *     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
  *     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
  *     FITNESS FOR A PARTICULAR PURPOSE.
  *
  *
  *     Xilinx products are not intended for use in life support appliances,
  *     devices, or systems. Use in such applications is expressly prohibited.
  *
  *
  *     (c) Copyright 2002 Xilinx Inc.
  *     All rights reserved.
  *
  *
  *     You should have received a copy of the GNU General Public License along
  *     with this program; if not, write to the Free Software Foundation, Inc.,
  *     675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /* #define DEBUG */
 /* #define ET_DEBUG 1 */

 /*
  * High Level Configuration Options
  * (easy to change)
  */

 #define CONFIG_405		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_XILINX_405	1
 #define CONFIG_XILINX_ML300	1	/* ...on a Xilinx ML300 board	*/

 #define CONFIG_SYSTEMACE	1
 #define CONFIG_DOS_PARTITION	1
 #define CFG_SYSTEMACE_BASE	XPAR_OPB_SYSACE_0_BASEADDR
 #define CFG_SYSTEMACE_WIDTH	XPAR_XSYSACE_MEM_WIDTH

 #define CONFIG_ENV_IS_IN_EEPROM	1	/* environment is in EEPROM */

 /* following are used only if env is in EEPROM */
 #ifdef	CONFIG_ENV_IS_IN_EEPROM
 #define CFG_I2C_EEPROM_ADDR	XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
 #define CFG_I2C_EEPROM_ADDR_LEN 1
 #define CFG_ENV_OFFSET		XPAR_PERSISTENT_0_IIC_0_BASEADDR
 #define CONFIG_MISC_INIT_R	1	/* used to call out convert_env() */
 #define CONFIG_ENV_OVERWRITE	1	/* allow users to update ethaddr and serial# */
 #endif

 #include "../board/xilinx/ml300/xparameters.h"

 #define CFG_NO_FLASH		1	/* no flash */
 #define CFG_ENV_SIZE		XPAR_PERSISTENT_0_IIC_0_HIGHADDR - XPAR_PERSISTENT_0_IIC_0_BASEADDR + 1
 #define CONFIG_BAUDRATE		9600
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/

 #define CONFIG_BOOTCOMMAND	"bootp" /* autoboot command	*/

 #define CONFIG_BOOTARGS		"console=ttyS0,9600 ip=off " \
 				"root=/dev/xsysace/disc0/part3 rw"

 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/


 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME


 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_NET

 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_FAT
 #undef CONFIG_CMD_IMLS


 /* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */
 /* 300000000 */

 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP		/* undef to save memory		*/
 #define CFG_PROMPT	"=> "	/* Monitor Command Prompt	*/

 #define CFG_CBSIZE	256	/* Console I/O Buffer Size	*/

 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
 #define CFG_MAXARGS	16	/* max number of command args	*/
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

 #define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

 #define CFG_DUART_CHAN		0
 #define CFG_NS16550_REG_SIZE -4
 #define CFG_NS16550 1
 #define CFG_INIT_CHAN1	 1

 /* The following table includes the supported baudrates */
 #define CFG_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

 #define CFG_LOAD_ADDR		0x400000	/* default load address */
 #define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */

 #define CFG_HZ		1000	/* decrementer freq: 1 ms ticks */

 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_MONITOR_BASE	0x04000000
 #define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/

 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */

 #define CFG_INIT_RAM_ADDR	0x800000  /* inside of SDRAM */
 #define CFG_INIT_RAM_END	0x2000	  /* End of used area in RAM */
 #define CFG_GBL_DATA_SIZE	128	  /* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

 /*
  * Internal Definitions
  *
  * Boot Flags
  */
 #define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02	/* Software reboot			*/

 #endif				/* __CONFIG_H */
	/*
	* ML300.h: ML300 specific config options
	*
	* http://www.xilinx.com/ml300
	*
	* Derived from : ML2.h
	*
	* Author: Xilinx, Inc.
	*
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*
	*
	* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
	* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
	* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
	* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
	* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR
	* OBTAINING ANY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
	* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
	* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
	* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
	* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
	* FITNESS FOR A PARTICULAR PURPOSE.
	*
	*
	* Xilinx products are not intended for use in life support appliances,
	* devices, or systems. Use in such applications is expressly prohibited.
	*
	*
	* (c) Copyright 2002 Xilinx Inc.
	* All rights reserved.
	*
	*
	* You should have received a copy of the GNU General Public License along
	* with this program; if not, write to the Free Software Foundation, Inc.,
	* 675 Mass Ave, Cambridge, MA 02139, USA.
	*
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/* #define DEBUG */
	/* #define ET_DEBUG 1 */

	/*
	* High Level Configuration Options
	* (easy to change)
	*/

	#define CONFIG_405 1 /* This is a PPC405 CPU */
	#define CONFIG_4xx 1 /* ...member of PPC4xx family */
	#define CONFIG_XILINX_405 1
	#define CONFIG_XILINX_ML300 1 /* ...on a Xilinx ML300 board */

	#define CONFIG_SYSTEMACE 1
	#define CONFIG_DOS_PARTITION 1
	#define CFG_SYSTEMACE_BASE XPAR_OPB_SYSACE_0_BASEADDR
	#define CFG_SYSTEMACE_WIDTH XPAR_XSYSACE_MEM_WIDTH

	#define CONFIG_ENV_IS_IN_EEPROM 1 /* environment is in EEPROM */

	/* following are used only if env is in EEPROM */
	#ifdef CONFIG_ENV_IS_IN_EEPROM
	#define CFG_I2C_EEPROM_ADDR XPAR_PERSISTENT_0_IIC_0_EEPROMADDR
	#define CFG_I2C_EEPROM_ADDR_LEN 1
	#define CFG_ENV_OFFSET XPAR_PERSISTENT_0_IIC_0_BASEADDR
	#define CONFIG_MISC_INIT_R 1 /* used to call out convert_env() */
	#define CONFIG_ENV_OVERWRITE 1 /* allow users to update ethaddr and serial# */
	#endif

	#include "../board/xilinx/ml300/xparameters.h"

	#define CFG_NO_FLASH 1 /* no flash */
	#define CFG_ENV_SIZE XPAR_PERSISTENT_0_IIC_0_HIGHADDR - XPAR_PERSISTENT_0_IIC_0_BASEADDR + 1
	#define CONFIG_BAUDRATE 9600
	#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */

	#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */

	#define CONFIG_BOOTARGS "console=ttyS0,9600 ip=off " \
	"root=/dev/xsysace/disc0/part3 rw"

	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */


	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME


	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>

	#define CONFIG_CMD_NET

	#undef CONFIG_CMD_FLASH
	#undef CONFIG_CMD_LOADS
	#undef CONFIG_CMD_FAT
	#undef CONFIG_CMD_IMLS


	/* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */
	/* 300000000 */

	/*
	* Miscellaneous configurable options
	*/
	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "=> " /* Monitor Command Prompt */

	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */

	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
	#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */

	#define CFG_DUART_CHAN 0
	#define CFG_NS16550_REG_SIZE -4
	#define CFG_NS16550 1
	#define CFG_INIT_CHAN1 1

	/* The following table includes the supported baudrates */
	#define CFG_BAUDRATE_TABLE \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

	#define CFG_LOAD_ADDR 0x400000 /* default load address */
	#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */

	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */

	/*-----------------------------------------------------------------------
	* Start addresses for the final memory configuration
	* (Set up by the startup code)
	* Please note that CFG_SDRAM_BASE _must_ start at 0
	*/
	#define CFG_SDRAM_BASE 0x00000000
	#define CFG_MONITOR_BASE 0x04000000
	#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
	#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 8 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	/*-----------------------------------------------------------------------
	* Definitions for initial stack pointer and data area (in DPRAM)
	*/

	#define CFG_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */
	#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET

	/*
	* Internal Definitions
	*
	* Boot Flags
	*/
	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#endif /* __CONFIG_H */