| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| /* |
| * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> |
| */ |
| |
| /dts-v1/; |
| |
| #include "sm6115.dtsi" |
| #include "pm6125.dtsi" |
| #include <dt-bindings/arm/qcom,ids.h> |
| |
| / { |
| model = "F(x)tec Pro1X (QX1050)"; |
| compatible = "fxtec,pro1x", "qcom,sm6115"; |
| chassis-type = "handset"; |
| |
| qcom,msm-id = <QCOM_ID_SM6115 0x10000>; |
| |
| chosen { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| framebuffer0: framebuffer@5c000000 { |
| compatible = "simple-framebuffer"; |
| reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>; |
| width = <1080>; |
| height = <2160>; |
| stride = <(1080 * 4)>; |
| format = "a8r8g8b8"; |
| clocks = <&gcc GCC_DISP_HF_AXI_CLK>; |
| }; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| pinctrl-0 = <&vol_up_n>; |
| pinctrl-names = "default"; |
| |
| key-volume-up { |
| label = "Volume Up"; |
| linux,code = <KEY_VOLUMEUP>; |
| gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; |
| debounce-interval = <15>; |
| linux,can-disable; |
| wakeup-source; |
| }; |
| }; |
| }; |
| |
| &dispcc { |
| /* HACK: disable until a panel driver is ready to retain simplefb */ |
| status = "disabled"; |
| }; |
| |
| &pm6125_gpios { |
| vol_up_n: vol-up-n-state { |
| pins = "gpio5"; |
| function = "normal"; |
| power-source = <0>; |
| bias-pull-up; |
| input-enable; |
| }; |
| }; |
| |
| &pon_pwrkey { |
| status = "okay"; |
| }; |
| |
| &pon_resin { |
| linux,code = <KEY_VOLUMEDOWN>; |
| status = "okay"; |
| }; |
| |
| &rpm_requests { |
| regulators-0 { |
| compatible = "qcom,rpm-pm6125-regulators"; |
| |
| pm6125_s6a: s6 { |
| regulator-min-microvolt = <304000>; |
| regulator-max-microvolt = <1456000>; |
| }; |
| |
| pm6125_s7a: s7 { |
| regulator-min-microvolt = <1280000>; |
| regulator-max-microvolt = <2040000>; |
| }; |
| |
| pm6125_s8a: s8 { |
| regulator-min-microvolt = <1064000>; |
| regulator-max-microvolt = <1304000>; |
| }; |
| |
| pm6125_l1a: l1 { |
| regulator-min-microvolt = <952000>; |
| regulator-max-microvolt = <1152000>; |
| }; |
| |
| pm6125_l4a: l4 { |
| regulator-min-microvolt = <488000>; |
| regulator-max-microvolt = <1000000>; |
| }; |
| |
| pm6125_l5a: l5 { |
| regulator-min-microvolt = <1648000>; |
| regulator-max-microvolt = <3056000>; |
| }; |
| |
| pm6125_l6a: l6 { |
| regulator-min-microvolt = <576000>; |
| regulator-max-microvolt = <656000>; |
| }; |
| |
| pm6125_l7a: l7 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1304000>; |
| }; |
| |
| pm6125_l8a: l8 { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <728000>; |
| }; |
| |
| pm6125_l9a: l9 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2000000>; |
| }; |
| |
| pm6125_l10a: l10 { |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <1904000>; |
| }; |
| |
| pm6125_l11a: l11 { |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <1952000>; |
| regulator-allow-set-load; |
| }; |
| |
| pm6125_l12a: l12 { |
| regulator-min-microvolt = <1624000>; |
| regulator-max-microvolt = <1984000>; |
| }; |
| |
| pm6125_l13a: l13 { |
| regulator-min-microvolt = <1504000>; |
| regulator-max-microvolt = <1952000>; |
| }; |
| |
| pm6125_l14a: l14 { |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <1904000>; |
| }; |
| |
| pm6125_l15a: l15 { |
| regulator-min-microvolt = <2920000>; |
| regulator-max-microvolt = <3232000>; |
| }; |
| |
| pm6125_l16a: l16 { |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <1904000>; |
| }; |
| |
| pm6125_l17a: l17 { |
| regulator-min-microvolt = <1152000>; |
| regulator-max-microvolt = <1384000>; |
| }; |
| |
| pm6125_l18a: l18 { |
| regulator-min-microvolt = <1104000>; |
| regulator-max-microvolt = <1312000>; |
| }; |
| |
| pm6125_l19a: l19 { |
| regulator-min-microvolt = <1624000>; |
| regulator-max-microvolt = <3304000>; |
| }; |
| |
| pm6125_l20a: l20 { |
| regulator-min-microvolt = <1624000>; |
| regulator-max-microvolt = <3304000>; |
| }; |
| |
| pm6125_l21a: l21 { |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3600000>; |
| }; |
| |
| pm6125_l22a: l22 { |
| regulator-min-microvolt = <2952000>; |
| regulator-max-microvolt = <3304000>; |
| }; |
| |
| pm6125_l23a: l23 { |
| regulator-min-microvolt = <3200000>; |
| regulator-max-microvolt = <3400000>; |
| }; |
| |
| pm6125_l24a: l24 { |
| regulator-min-microvolt = <2704000>; |
| regulator-max-microvolt = <3600000>; |
| regulator-allow-set-load; |
| }; |
| }; |
| }; |
| |
| &sleep_clk { |
| clock-frequency = <32764>; |
| }; |
| |
| &tlmm { |
| gpio-reserved-ranges = <0 4>, <14 4>; |
| }; |
| |
| &ufs_mem_hc { |
| vcc-supply = <&pm6125_l24a>; |
| vcc-max-microamp = <600000>; |
| vccq2-supply = <&pm6125_l11a>; |
| vccq2-max-microamp = <600000>; |
| vdd-hba-supply = <&pm6125_l18a>; |
| status = "okay"; |
| }; |
| |
| &ufs_mem_phy { |
| vdda-phy-supply = <&pm6125_l4a>; |
| vdda-pll-supply = <&pm6125_l12a>; |
| status = "okay"; |
| }; |
| |
| &usb { |
| status = "okay"; |
| }; |
| |
| &usb_dwc3 { |
| /delete-property/ usb-role-switch; |
| maximum-speed = "high-speed"; |
| dr_mode = "peripheral"; |
| }; |
| |
| &usb_hsphy { |
| vdd-supply = <&pm6125_l4a>; |
| vdda-pll-supply = <&pm6125_l12a>; |
| vdda-phy-dpdm-supply = <&pm6125_l15a>; |
| status = "okay"; |
| }; |
| |
| &xo_board { |
| clock-frequency = <19200000>; |
| }; |