| Freescale MCF53017EVB ColdFire Development Board |
| ================================================ |
| |
| TsiChung Liew(Tsi-Chung.Liew@freescale.com) |
| Created 10/22/08 |
| =========================================== |
| |
| |
| Changed files: |
| ============== |
| |
| - board/freescale/m53017evb/m53017evb.c Dram setup |
| - board/freescale/m53017evb/mii.c Mii access |
| - board/freescale/m53017evb/Makefile Makefile |
| - board/freescale/m53017evb/config.mk config make |
| - board/freescale/m53017evb/u-boot.lds Linker description |
| |
| - cpu/mcf532x/cpu.c cpu specific code |
| - cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs |
| - cpu/mcf532x/interrupts.c cpu specific interrupt support |
| - cpu/mcf532x/speed.c system, flexbus, and cpu clock |
| - cpu/mcf532x/Makefile Makefile |
| - cpu/mcf532x/config.mk config make |
| - cpu/mcf532x/start.S start up assembly code |
| |
| - doc/README.m53017evb This readme file |
| |
| - drivers/net/mcffec.c ColdFire common FEC driver |
| - drivers/net/mcfmii.c ColdFire common Mii driver |
| - drivers/serial/mcfuart.c ColdFire common UART driver |
| - drivers/rtc/mcfrtc.c Realtime clock Driver |
| |
| - include/asm-m68k/bitops.h Bit operation function export |
| - include/asm-m68k/byteorder.h Byte order functions |
| - include/asm-m68k/fec.h FEC structure and definition |
| - include/asm-m68k/fsl_i2c.h I2C structure and definition |
| - include/asm-m68k/global_data.h Global data structure |
| - include/asm-m68k/immap.h ColdFire specific header file and driver macros |
| - include/asm-m68k/immap_5301x.h mcf5301x specific header file |
| - include/asm-m68k/io.h io functions |
| - include/asm-m68k/m532x.h mcf5301x specific header file |
| - include/asm-m68k/posix_types.h Posix |
| - include/asm-m68k/processor.h header file |
| - include/asm-m68k/ptrace.h Exception structure |
| - include/asm-m68k/rtc.h Realtime clock header file |
| - include/asm-m68k/string.h String function export |
| - include/asm-m68k/timer.h Timer structure and definition |
| - include/asm-m68k/types.h Data types definition |
| - include/asm-m68k/uart.h Uart structure and definition |
| - include/asm-m68k/u-boot.h u-boot structure |
| |
| - include/configs/M53017EVB.h Board specific configuration file |
| |
| - arch/m68k/lib/board.c board init function |
| - arch/m68k/lib/cache.c |
| - arch/m68k/lib/interrupts Coldfire common interrupt functions |
| - arch/m68k/lib/m68k_linux.c |
| - arch/m68k/lib/time.c Timer functions (Dma timer and PIT) |
| - arch/m68k/lib/traps.c Exception init code |
| |
| 1 MCF5301x specific Options/Settings |
| ==================================== |
| 1.1 pre-loader is no longer suppoer in thie coldfire family |
| |
| 1.2 Configuration settings for M53017EVB Development Board |
| CONFIG_MCF5301x -- define for all MCF5301x CPUs |
| CONFIG_M53015 -- define for MCF53015 CPUs |
| CONFIG_M53017EVB -- define for M53017EVB board |
| |
| CONFIG_MCFUART -- define to use common CF Uart driver |
| CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 |
| CONFIG_BAUDRATE -- define UART baudrate |
| |
| CONFIG_MCFRTC -- define to use common CF RTC driver |
| CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h |
| CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency |
| RTC_DEBUG -- define to show RTC debug message |
| CONFIG_CMD_DATE -- enable to use date feature in u-boot |
| |
| CONFIG_MCFFEC -- define to use common CF FEC driver |
| CONFIG_NET_MULTI -- define to use multi FEC in u-boot |
| CONFIG_MII -- enable to use MII driver |
| CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c |
| CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery |
| CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer |
| CONFIG_SYS_FAULT_ECHO_LINK_DOWN -- |
| CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration |
| CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register |
| MCFFEC_TOUT_LOOP -- set FEC timeout loop |
| |
| CONFIG_MCFTMR -- define to use DMA timer |
| CONFIG_MCFPIT -- define to use PIT timer |
| |
| CONFIG_FSL_I2C -- define to use FSL common I2C driver |
| CONFIG_HARD_I2C -- define for I2C hardware support |
| CONFIG_SOFT_I2C -- define for I2C bit-banged |
| CONFIG_SYS_I2C_SPEED -- define for I2C speed |
| CONFIG_SYS_I2C_SLAVE -- define for I2C slave address |
| CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset |
| CONFIG_SYS_IMMR -- define for MBAR offset |
| |
| CONFIG_SYS_MBAR -- define MBAR offset |
| |
| CONFIG_MONITOR_IS_IN_RAM -- Not support |
| |
| CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM |
| |
| CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register |
| CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register |
| CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register |
| |
| CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base |
| |
| 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL |
| =========================================== |
| 2.1. System memory map: |
| Flash: 0x00000000-0x3FFFFFFF (1024MB) |
| DDR: 0x40000000-0x7FFFFFFF (1024MB) |
| SRAM: 0x80000000-0x8FFFFFFF (256MB) |
| IP: 0xFC000000-0xFFFFFFFF (256MB) |
| |
| 2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and |
| linux kernel, you can customize it based on your system requirements: |
| Flash0: 0x00000000-0x00FFFFFF (16MB) |
| DDR: 0x40000000-0x4FFFFFFF (256MB) |
| SRAM: 0x80000000-0x80007FFF (32KB) |
| IP: 0xFC000000-0xFC0FFFFF (64KB) |
| |
| 3. COMPILATION |
| ============== |
| 3.1 To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or |
| uClinux version) from codesourcery.com was used. Download it from: |
| http://www.codesourcery.com/gnu_toolchains/coldfire/download.html |
| |
| 3.2 Compilation |
| export CROSS_COMPILE=cross-compile-prefix |
| cd u-boot |
| make distclean |
| make M53017EVB_config |
| make |
| |
| 4. SCREEN DUMP |
| ============== |
| 4.1 M53017EVB Development board |
| (NOTE: May not show exactly the same) |
| |
| U-Boot 2008.10 (Oct 22 2007 - 11:07:57) |
| |
| CPU: Freescale MCF53015 (Mask:76 Version:0) |
| CPU CLK 240 Mhz BUS CLK 80 Mhz |
| Board: Freescale M53017EVB |
| I2C: ready |
| DRAM: 64 MB |
| FLASH: 16 MB |
| In: serial |
| Out: serial |
| Err: serial |
| NAND: 16 MiB |
| Net: FEC0, FEC1 |
| -> print |
| bootdelay=1 |
| baudrate=115200 |
| ethaddr=00:e0:0c:bc:e5:60 |
| hostname=M53017EVB |
| netdev=eth0 |
| loadaddr=40010000 |
| u-boot=u-boot.bin |
| load=tftp ${loadaddr) ${u-boot} |
| upd=run load; run prog |
| prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save |
| gatewayip=192.168.1.1 |
| netmask=255.255.255.0 |
| ipaddr=192.168.1.3 |
| serverip=192.168.1.2 |
| stdin=serial |
| stdout=serial |
| stderr=serial |
| mem=65024k |
| |
| Environment size: 437/4092 bytes |
| -> |