| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2014-2018 |
| * Marcel Ziswiler <marcel@ziswiler.com> |
| */ |
| |
| #include <common.h> |
| #include <env.h> |
| #include <init.h> |
| #include <log.h> |
| #include <asm/arch/gp_padctrl.h> |
| #include <asm/arch/pinmux.h> |
| #include <asm/arch-tegra/ap.h> |
| #include <asm/arch-tegra/tegra.h> |
| #include <asm/global_data.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <fdt_support.h> |
| #include <pci_tegra.h> |
| #include <linux/delay.h> |
| #include "../common/tdx-common.h" |
| |
| #include "pinmux-config-apalis_t30.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define PMU_I2C_ADDRESS 0x2D |
| #define MAX_I2C_RETRY 3 |
| |
| #ifdef CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT |
| #define PEX_PERST_N TEGRA_GPIO(S, 7) /* Apalis GPIO7 */ |
| #define RESET_MOCI_CTRL TEGRA_GPIO(I, 4) |
| |
| static int pci_reset_status; |
| #endif /* CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT */ |
| |
| int arch_misc_init(void) |
| { |
| if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) == |
| NVBOOTTYPE_RECOVERY) |
| printf("USB recovery mode\n"); |
| |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| printf("Model: Toradex Apalis T30 %dGB\n", |
| (gd->ram_size == 0x40000000) ? 1 : 2); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) |
| int ft_board_setup(void *blob, struct bd_info *bd) |
| { |
| u8 enetaddr[6]; |
| |
| /* MAC addr */ |
| if (eth_env_get_enetaddr("ethaddr", enetaddr)) { |
| int err = fdt_find_and_setprop(blob, |
| "/pcie@3000/pci@3,0/ethernet@0,0", |
| "local-mac-address", enetaddr, 6, 0); |
| |
| /* Older device trees might have used a different node name */ |
| if (err < 0) |
| err = fdt_find_and_setprop(blob, |
| "/pcie@3000/pci@3,0/pcie@0", |
| "local-mac-address", enetaddr, 6, 0); |
| |
| if (err >= 0) |
| puts(" MAC address updated...\n"); |
| } |
| |
| return ft_common_board_setup(blob, bd); |
| } |
| #endif |
| |
| /* |
| * Routine: pinmux_init |
| * Description: Do individual peripheral pinmux configs |
| */ |
| void pinmux_init(void) |
| { |
| pinmux_config_pingrp_table(tegra3_pinmux_common, |
| ARRAY_SIZE(tegra3_pinmux_common)); |
| |
| pinmux_config_pingrp_table(unused_pins_lowpower, |
| ARRAY_SIZE(unused_pins_lowpower)); |
| |
| /* Initialize any non-default pad configs (APB_MISC_GP regs) */ |
| pinmux_config_drvgrp_table(apalis_t30_padctrl, |
| ARRAY_SIZE(apalis_t30_padctrl)); |
| } |
| |
| #ifdef CONFIG_PCI_TEGRA |
| int tegra_pcie_board_init(void) |
| { |
| struct udevice *dev; |
| u8 addr, data[1]; |
| int err; |
| |
| err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev); |
| if (err) { |
| debug("%s: Cannot find PMIC I2C chip\n", __func__); |
| return err; |
| } |
| |
| /* TPS659110: VDD2_OP_REG = 1.05V */ |
| data[0] = 0x27; |
| addr = 0x25; |
| |
| err = dm_i2c_write(dev, addr, data, 1); |
| if (err) { |
| debug("failed to set VDD supply\n"); |
| return err; |
| } |
| |
| /* TPS659110: VDD2_REG 7.5 mV/us, ACTIVE */ |
| data[0] = 0x0D; |
| addr = 0x24; |
| |
| err = dm_i2c_write(dev, addr, data, 1); |
| if (err) { |
| debug("failed to enable VDD supply\n"); |
| return err; |
| } |
| |
| /* TPS659110: LDO6_REG = 1.1V, ACTIVE */ |
| data[0] = 0x0D; |
| addr = 0x35; |
| |
| err = dm_i2c_write(dev, addr, data, 1); |
| if (err) { |
| debug("failed to set AVDD supply\n"); |
| return err; |
| } |
| |
| #ifdef CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT |
| gpio_request(PEX_PERST_N, "PEX_PERST_N"); |
| gpio_request(RESET_MOCI_CTRL, "RESET_MOCI_CTRL"); |
| #endif /* CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT */ |
| |
| return 0; |
| } |
| |
| void tegra_pcie_board_port_reset(struct tegra_pcie_port *port) |
| { |
| int index = tegra_pcie_port_index_of_port(port); |
| |
| if (index == 2) { /* I210 Gigabit Ethernet Controller (On-module) */ |
| tegra_pcie_port_reset(port); |
| } |
| #ifdef CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT |
| /* |
| * Apalis PCIe aka port 1 and Apalis Type Specific 4 Lane PCIe aka port |
| * 0 share the same RESET_MOCI therefore only assert it once for both |
| * ports to avoid losing the previously brought up port again. |
| */ |
| else if ((index == 1) || (index == 0)) { |
| /* only do it once per init cycle */ |
| if (pci_reset_status % 2 == 0) { |
| /* |
| * Reset PLX PEX 8605 PCIe Switch plus PCIe devices on |
| * Apalis Evaluation Board |
| */ |
| gpio_direction_output(PEX_PERST_N, 0); |
| gpio_direction_output(RESET_MOCI_CTRL, 0); |
| |
| /* |
| * Must be asserted for 100 ms after power and clocks |
| * are stable |
| */ |
| mdelay(100); |
| |
| gpio_set_value(PEX_PERST_N, 1); |
| /* |
| * Err_5: PEX_REFCLK_OUTpx/nx Clock Outputs is not |
| * Guaranteed Until 900 us After PEX_PERST# De-assertion |
| */ |
| mdelay(1); |
| gpio_set_value(RESET_MOCI_CTRL, 1); |
| } |
| pci_reset_status++; |
| } |
| #endif /* CONFIG_APALIS_T30_PCIE_EVALBOARD_INIT */ |
| } |
| #endif /* CONFIG_PCI_TEGRA */ |
| |
| /* |
| * Backlight off before OS handover |
| */ |
| void board_preboot_os(void) |
| { |
| gpio_request(TEGRA_GPIO(V, 2), "BKL1_ON"); |
| gpio_direction_output(TEGRA_GPIO(V, 2), 0); |
| } |