| /* |
| * (C) Copyright 2017 Whitebox Systems / Northend Systems B.V. |
| * S.J.R. van Schaik <stephan@whiteboxsystems.nl> |
| * M.B.W. Wajer <merlijn@whiteboxsystems.nl> |
| * |
| * (C) Copyright 2017 Olimex Ltd.. |
| * Stefan Mavrodiev <stefan@olimex.com> |
| * |
| * Based on linux spi driver. Original copyright follows: |
| * linux/drivers/spi/spi-sun4i.c |
| * |
| * Copyright (C) 2012 - 2014 Allwinner Tech |
| * Pan Nan <pannan@allwinnertech.com> |
| * |
| * Copyright (C) 2014 Maxime Ripard |
| * Maxime Ripard <maxime.ripard@free-electrons.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <clk.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <spi.h> |
| #include <errno.h> |
| #include <fdt_support.h> |
| #include <reset.h> |
| #include <wait_bit.h> |
| #include <asm/global_data.h> |
| #include <dm/device_compat.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/bitops.h> |
| #include <asm/io.h> |
| |
| #include <linux/iopoll.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* sun4i spi registers */ |
| #define SUN4I_RXDATA_REG 0x00 |
| #define SUN4I_TXDATA_REG 0x04 |
| #define SUN4I_CTL_REG 0x08 |
| #define SUN4I_CLK_CTL_REG 0x1c |
| #define SUN4I_BURST_CNT_REG 0x20 |
| #define SUN4I_XMIT_CNT_REG 0x24 |
| #define SUN4I_FIFO_STA_REG 0x28 |
| |
| /* sun6i spi registers */ |
| #define SUN6I_GBL_CTL_REG 0x04 |
| #define SUN6I_TFR_CTL_REG 0x08 |
| #define SUN6I_FIFO_CTL_REG 0x18 |
| #define SUN6I_FIFO_STA_REG 0x1c |
| #define SUN6I_CLK_CTL_REG 0x24 |
| #define SUN6I_BURST_CNT_REG 0x30 |
| #define SUN6I_XMIT_CNT_REG 0x34 |
| #define SUN6I_BURST_CTL_REG 0x38 |
| #define SUN6I_TXDATA_REG 0x200 |
| #define SUN6I_RXDATA_REG 0x300 |
| |
| /* sun spi bits */ |
| #define SUN4I_CTL_ENABLE BIT(0) |
| #define SUN4I_CTL_MASTER BIT(1) |
| #define SUN4I_CLK_CTL_CDR2_MASK 0xff |
| #define SUN4I_CLK_CTL_CDR2(div) ((div) & SUN4I_CLK_CTL_CDR2_MASK) |
| #define SUN4I_CLK_CTL_CDR1_MASK 0xf |
| #define SUN4I_CLK_CTL_CDR1(div) (((div) & SUN4I_CLK_CTL_CDR1_MASK) << 8) |
| #define SUN4I_CLK_CTL_DRS BIT(12) |
| #define SUN4I_MAX_XFER_SIZE 0xffffff |
| #define SUN4I_BURST_CNT(cnt) ((cnt) & SUN4I_MAX_XFER_SIZE) |
| #define SUN4I_XMIT_CNT(cnt) ((cnt) & SUN4I_MAX_XFER_SIZE) |
| #define SUN4I_FIFO_STA_RF_CNT_BITS 0 |
| |
| #ifdef CONFIG_MACH_SUNIV |
| /* the AHB clock, which we programmed to be 1/3 of PLL_PERIPH@600MHz */ |
| #define SUNXI_INPUT_CLOCK 200000000 /* 200 MHz */ |
| #define SUN4I_SPI_MAX_RATE (SUNXI_INPUT_CLOCK / 2) |
| #else |
| /* the SPI mod clock, defaulting to be 1/1 of the HOSC@24MHz */ |
| #define SUNXI_INPUT_CLOCK 24000000 /* 24 MHz */ |
| #define SUN4I_SPI_MAX_RATE SUNXI_INPUT_CLOCK |
| #endif |
| #define SUN4I_SPI_MIN_RATE 3000 |
| #define SUN4I_SPI_DEFAULT_RATE 1000000 |
| #define SUN4I_SPI_TIMEOUT_MS 1000 |
| |
| #define SPI_REG(priv, reg) ((priv)->base + \ |
| (priv)->variant->regs[reg]) |
| #define SPI_BIT(priv, bit) ((priv)->variant->bits[bit]) |
| #define SPI_CS(priv, cs) (((cs) << SPI_BIT(priv, SPI_TCR_CS_SEL)) & \ |
| SPI_BIT(priv, SPI_TCR_CS_MASK)) |
| |
| /* sun spi register set */ |
| enum sun4i_spi_regs { |
| SPI_GCR, |
| SPI_TCR, |
| SPI_FCR, |
| SPI_FSR, |
| SPI_CCR, |
| SPI_BC, |
| SPI_TC, |
| SPI_BCTL, |
| SPI_TXD, |
| SPI_RXD, |
| }; |
| |
| /* sun spi register bits */ |
| enum sun4i_spi_bits { |
| SPI_GCR_TP, |
| SPI_GCR_SRST, |
| SPI_TCR_CPHA, |
| SPI_TCR_CPOL, |
| SPI_TCR_CS_ACTIVE_LOW, |
| SPI_TCR_CS_SEL, |
| SPI_TCR_CS_MASK, |
| SPI_TCR_XCH, |
| SPI_TCR_CS_MANUAL, |
| SPI_TCR_CS_LEVEL, |
| SPI_TCR_SDC, |
| SPI_TCR_SDM, |
| SPI_FCR_TF_RST, |
| SPI_FCR_RF_RST, |
| SPI_FSR_RF_CNT_MASK, |
| }; |
| |
| struct sun4i_spi_variant { |
| const unsigned long *regs; |
| const u32 *bits; |
| u32 fifo_depth; |
| bool has_soft_reset; |
| bool has_burst_ctl; |
| bool has_clk_ctl; |
| }; |
| |
| struct sun4i_spi_plat { |
| struct sun4i_spi_variant *variant; |
| u32 base; |
| }; |
| |
| struct sun4i_spi_priv { |
| struct sun4i_spi_variant *variant; |
| struct clk clk_ahb, clk_mod; |
| struct reset_ctl reset; |
| u32 base; |
| u32 freq; |
| u32 mode; |
| |
| const u8 *tx_buf; |
| u8 *rx_buf; |
| }; |
| |
| static inline void sun4i_spi_drain_fifo(struct sun4i_spi_priv *priv, int len) |
| { |
| u8 byte; |
| |
| while (len--) { |
| byte = readb(SPI_REG(priv, SPI_RXD)); |
| if (priv->rx_buf) |
| *priv->rx_buf++ = byte; |
| } |
| } |
| |
| static inline void sun4i_spi_fill_fifo(struct sun4i_spi_priv *priv, int len) |
| { |
| u8 byte; |
| |
| while (len--) { |
| byte = priv->tx_buf ? *priv->tx_buf++ : 0; |
| writeb(byte, SPI_REG(priv, SPI_TXD)); |
| } |
| } |
| |
| static void sun4i_spi_set_cs(struct udevice *bus, u8 cs, bool enable) |
| { |
| struct sun4i_spi_priv *priv = dev_get_priv(bus); |
| u32 reg; |
| |
| reg = readl(SPI_REG(priv, SPI_TCR)); |
| |
| reg &= ~SPI_BIT(priv, SPI_TCR_CS_MASK); |
| reg |= SPI_CS(priv, cs); |
| |
| if (enable) |
| reg &= ~SPI_BIT(priv, SPI_TCR_CS_LEVEL); |
| else |
| reg |= SPI_BIT(priv, SPI_TCR_CS_LEVEL); |
| |
| writel(reg, SPI_REG(priv, SPI_TCR)); |
| } |
| |
| static inline int sun4i_spi_set_clock(struct udevice *dev, bool enable) |
| { |
| struct sun4i_spi_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| if (!enable) { |
| clk_disable(&priv->clk_ahb); |
| clk_disable(&priv->clk_mod); |
| if (reset_valid(&priv->reset)) |
| reset_assert(&priv->reset); |
| return 0; |
| } |
| |
| ret = clk_enable(&priv->clk_ahb); |
| if (ret) { |
| dev_err(dev, "failed to enable ahb clock (ret=%d)\n", ret); |
| return ret; |
| } |
| |
| ret = clk_enable(&priv->clk_mod); |
| if (ret) { |
| dev_err(dev, "failed to enable mod clock (ret=%d)\n", ret); |
| goto err_ahb; |
| } |
| |
| if (reset_valid(&priv->reset)) { |
| ret = reset_deassert(&priv->reset); |
| if (ret) { |
| dev_err(dev, "failed to deassert reset\n"); |
| goto err_mod; |
| } |
| } |
| |
| return 0; |
| |
| err_mod: |
| clk_disable(&priv->clk_mod); |
| err_ahb: |
| clk_disable(&priv->clk_ahb); |
| return ret; |
| } |
| |
| static void sun4i_spi_set_speed_mode(struct udevice *dev) |
| { |
| struct sun4i_spi_priv *priv = dev_get_priv(dev); |
| unsigned int div, div_cdr2; |
| u32 reg; |
| |
| /* |
| * The uclass should take care that this won't happen. But anyway, |
| * avoid a div-by-zero exception. |
| */ |
| if (!priv->freq) |
| return; |
| |
| /* |
| * Setup clock divider. |
| * |
| * We have two choices there. Either we can use the clock |
| * divide rate 1, which is calculated thanks to this formula: |
| * SPI_CLK = MOD_CLK / (2 ^ (cdr + 1)) |
| * Or for sun6i/sun8i variants: |
| * SPI_CLK = MOD_CLK / (2 ^ cdr) |
| * Or we can use CDR2, which is calculated with the formula: |
| * SPI_CLK = MOD_CLK / (2 * (cdr + 1)) |
| * Whether we use the former or the latter is set through the |
| * DRS bit. |
| * |
| * First try CDR2, and if we can't reach the expected |
| * frequency, fall back to CDR1. |
| * There is one exception if the requested clock is the input |
| * clock. In that case we always use CDR1 because we'll get a |
| * 1:1 ration for sun6i/sun8i variants. |
| */ |
| |
| div = DIV_ROUND_UP(SUNXI_INPUT_CLOCK, priv->freq); |
| div_cdr2 = DIV_ROUND_UP(div, 2); |
| reg = readl(SPI_REG(priv, SPI_CCR)); |
| |
| if (div != 1 && (div_cdr2 <= (SUN4I_CLK_CTL_CDR2_MASK + 1))) { |
| reg &= ~(SUN4I_CLK_CTL_CDR2_MASK | SUN4I_CLK_CTL_DRS); |
| reg |= SUN4I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN4I_CLK_CTL_DRS; |
| } else { |
| div = fls(div - 1); |
| /* The F1C100s encodes the divider as 2^(n+1) */ |
| if (IS_ENABLED(CONFIG_MACH_SUNIV)) |
| div--; |
| reg &= ~((SUN4I_CLK_CTL_CDR1_MASK << 8) | SUN4I_CLK_CTL_DRS); |
| reg |= SUN4I_CLK_CTL_CDR1(div); |
| } |
| |
| writel(reg, SPI_REG(priv, SPI_CCR)); |
| |
| reg = readl(SPI_REG(priv, SPI_TCR)); |
| reg &= ~(SPI_BIT(priv, SPI_TCR_CPOL) | SPI_BIT(priv, SPI_TCR_CPHA)); |
| |
| if (priv->mode & SPI_CPOL) |
| reg |= SPI_BIT(priv, SPI_TCR_CPOL); |
| |
| if (priv->mode & SPI_CPHA) |
| reg |= SPI_BIT(priv, SPI_TCR_CPHA); |
| |
| writel(reg, SPI_REG(priv, SPI_TCR)); |
| } |
| |
| static int sun4i_spi_claim_bus(struct udevice *dev) |
| { |
| struct sun4i_spi_priv *priv = dev_get_priv(dev->parent); |
| int ret; |
| |
| ret = sun4i_spi_set_clock(dev->parent, true); |
| if (ret) |
| return ret; |
| |
| setbits_le32(SPI_REG(priv, SPI_GCR), SUN4I_CTL_ENABLE | |
| SUN4I_CTL_MASTER | SPI_BIT(priv, SPI_GCR_TP)); |
| |
| if (priv->variant->has_soft_reset) |
| setbits_le32(SPI_REG(priv, SPI_GCR), |
| SPI_BIT(priv, SPI_GCR_SRST)); |
| |
| setbits_le32(SPI_REG(priv, SPI_TCR), SPI_BIT(priv, SPI_TCR_CS_MANUAL) | |
| SPI_BIT(priv, SPI_TCR_CS_ACTIVE_LOW)); |
| |
| if (priv->variant->has_clk_ctl) { |
| sun4i_spi_set_speed_mode(dev->parent); |
| } else { |
| /* |
| * At this moment there is no ability to change input clock. |
| * Therefore, we can only use default HOSC@24MHz clock and |
| * set SPI sampling mode to normal |
| */ |
| clrsetbits_le32(SPI_REG(priv, SPI_TCR), |
| SPI_BIT(priv, SPI_TCR_SDC) | |
| SPI_BIT(priv, SPI_TCR_SDM), |
| SPI_BIT(priv, SPI_TCR_SDM)); |
| } |
| |
| return 0; |
| } |
| |
| static int sun4i_spi_release_bus(struct udevice *dev) |
| { |
| struct sun4i_spi_priv *priv = dev_get_priv(dev->parent); |
| |
| clrbits_le32(SPI_REG(priv, SPI_GCR), SUN4I_CTL_ENABLE); |
| |
| sun4i_spi_set_clock(dev->parent, false); |
| |
| return 0; |
| } |
| |
| static int sun4i_spi_xfer(struct udevice *dev, unsigned int bitlen, |
| const void *dout, void *din, unsigned long flags) |
| { |
| struct udevice *bus = dev->parent; |
| struct sun4i_spi_priv *priv = dev_get_priv(bus); |
| struct dm_spi_slave_plat *slave_plat = dev_get_parent_plat(dev); |
| |
| u32 len = bitlen / 8; |
| u8 nbytes; |
| int ret; |
| |
| priv->tx_buf = dout; |
| priv->rx_buf = din; |
| |
| if (bitlen % 8) { |
| debug("%s: non byte-aligned SPI transfer.\n", __func__); |
| return -ENAVAIL; |
| } |
| |
| if (flags & SPI_XFER_BEGIN) |
| sun4i_spi_set_cs(bus, slave_plat->cs, true); |
| |
| /* Reset FIFOs */ |
| setbits_le32(SPI_REG(priv, SPI_FCR), SPI_BIT(priv, SPI_FCR_RF_RST) | |
| SPI_BIT(priv, SPI_FCR_TF_RST)); |
| |
| while (len) { |
| /* Setup the transfer now... */ |
| nbytes = min(len, (priv->variant->fifo_depth - 1)); |
| |
| /* Setup the counters */ |
| writel(SUN4I_BURST_CNT(nbytes), SPI_REG(priv, SPI_BC)); |
| writel(SUN4I_XMIT_CNT(nbytes), SPI_REG(priv, SPI_TC)); |
| |
| if (priv->variant->has_burst_ctl) |
| writel(SUN4I_BURST_CNT(nbytes), |
| SPI_REG(priv, SPI_BCTL)); |
| |
| /* Fill the TX FIFO */ |
| sun4i_spi_fill_fifo(priv, nbytes); |
| |
| /* Start the transfer */ |
| setbits_le32(SPI_REG(priv, SPI_TCR), |
| SPI_BIT(priv, SPI_TCR_XCH)); |
| |
| /* Wait for the transfer to be done */ |
| ret = wait_for_bit_le32((const void *)SPI_REG(priv, SPI_TCR), |
| SPI_BIT(priv, SPI_TCR_XCH), |
| false, SUN4I_SPI_TIMEOUT_MS, false); |
| if (ret < 0) { |
| printf("ERROR: sun4i_spi: Timeout transferring data\n"); |
| sun4i_spi_set_cs(bus, slave_plat->cs, false); |
| return ret; |
| } |
| |
| /* Drain the RX FIFO */ |
| sun4i_spi_drain_fifo(priv, nbytes); |
| |
| len -= nbytes; |
| } |
| |
| if (flags & SPI_XFER_END) |
| sun4i_spi_set_cs(bus, slave_plat->cs, false); |
| |
| return 0; |
| } |
| |
| static int sun4i_spi_set_speed(struct udevice *dev, uint speed) |
| { |
| struct sun4i_spi_priv *priv = dev_get_priv(dev); |
| |
| if (speed > SUN4I_SPI_MAX_RATE) |
| speed = SUN4I_SPI_MAX_RATE; |
| |
| if (speed < SUN4I_SPI_MIN_RATE) |
| speed = SUN4I_SPI_MIN_RATE; |
| |
| priv->freq = speed; |
| |
| return 0; |
| } |
| |
| static int sun4i_spi_set_mode(struct udevice *dev, uint mode) |
| { |
| struct sun4i_spi_priv *priv = dev_get_priv(dev); |
| |
| priv->mode = mode; |
| |
| return 0; |
| } |
| |
| static const struct dm_spi_ops sun4i_spi_ops = { |
| .claim_bus = sun4i_spi_claim_bus, |
| .release_bus = sun4i_spi_release_bus, |
| .xfer = sun4i_spi_xfer, |
| .set_speed = sun4i_spi_set_speed, |
| .set_mode = sun4i_spi_set_mode, |
| }; |
| |
| static int sun4i_spi_probe(struct udevice *bus) |
| { |
| struct sun4i_spi_plat *plat = dev_get_plat(bus); |
| struct sun4i_spi_priv *priv = dev_get_priv(bus); |
| int ret; |
| |
| ret = clk_get_by_name(bus, "ahb", &priv->clk_ahb); |
| if (ret) { |
| dev_err(bus, "failed to get ahb clock\n"); |
| return ret; |
| } |
| |
| ret = clk_get_by_name(bus, "mod", &priv->clk_mod); |
| if (ret) { |
| dev_err(bus, "failed to get mod clock\n"); |
| return ret; |
| } |
| |
| ret = reset_get_by_index(bus, 0, &priv->reset); |
| if (ret && ret != -ENOENT) { |
| dev_err(bus, "failed to get reset\n"); |
| return ret; |
| } |
| |
| priv->variant = plat->variant; |
| priv->base = plat->base; |
| |
| return 0; |
| } |
| |
| static int sun4i_spi_of_to_plat(struct udevice *bus) |
| { |
| struct sun4i_spi_plat *plat = dev_get_plat(bus); |
| |
| plat->base = dev_read_addr(bus); |
| plat->variant = (struct sun4i_spi_variant *)dev_get_driver_data(bus); |
| |
| return 0; |
| } |
| |
| static const unsigned long sun4i_spi_regs[] = { |
| [SPI_GCR] = SUN4I_CTL_REG, |
| [SPI_TCR] = SUN4I_CTL_REG, |
| [SPI_FCR] = SUN4I_CTL_REG, |
| [SPI_FSR] = SUN4I_FIFO_STA_REG, |
| [SPI_CCR] = SUN4I_CLK_CTL_REG, |
| [SPI_BC] = SUN4I_BURST_CNT_REG, |
| [SPI_TC] = SUN4I_XMIT_CNT_REG, |
| [SPI_TXD] = SUN4I_TXDATA_REG, |
| [SPI_RXD] = SUN4I_RXDATA_REG, |
| }; |
| |
| static const u32 sun4i_spi_bits[] = { |
| [SPI_GCR_TP] = BIT(18), |
| [SPI_TCR_CPHA] = BIT(2), |
| [SPI_TCR_CPOL] = BIT(3), |
| [SPI_TCR_CS_ACTIVE_LOW] = BIT(4), |
| [SPI_TCR_XCH] = BIT(10), |
| [SPI_TCR_CS_SEL] = 12, |
| [SPI_TCR_CS_MASK] = 0x3000, |
| [SPI_TCR_CS_MANUAL] = BIT(16), |
| [SPI_TCR_CS_LEVEL] = BIT(17), |
| [SPI_FCR_TF_RST] = BIT(8), |
| [SPI_FCR_RF_RST] = BIT(9), |
| [SPI_FSR_RF_CNT_MASK] = GENMASK(6, 0), |
| }; |
| |
| static const unsigned long sun6i_spi_regs[] = { |
| [SPI_GCR] = SUN6I_GBL_CTL_REG, |
| [SPI_TCR] = SUN6I_TFR_CTL_REG, |
| [SPI_FCR] = SUN6I_FIFO_CTL_REG, |
| [SPI_FSR] = SUN6I_FIFO_STA_REG, |
| [SPI_CCR] = SUN6I_CLK_CTL_REG, |
| [SPI_BC] = SUN6I_BURST_CNT_REG, |
| [SPI_TC] = SUN6I_XMIT_CNT_REG, |
| [SPI_BCTL] = SUN6I_BURST_CTL_REG, |
| [SPI_TXD] = SUN6I_TXDATA_REG, |
| [SPI_RXD] = SUN6I_RXDATA_REG, |
| }; |
| |
| static const u32 sun6i_spi_bits[] = { |
| [SPI_GCR_TP] = BIT(7), |
| [SPI_GCR_SRST] = BIT(31), |
| [SPI_TCR_CPHA] = BIT(0), |
| [SPI_TCR_CPOL] = BIT(1), |
| [SPI_TCR_CS_ACTIVE_LOW] = BIT(2), |
| [SPI_TCR_CS_SEL] = 4, |
| [SPI_TCR_CS_MASK] = 0x30, |
| [SPI_TCR_CS_MANUAL] = BIT(6), |
| [SPI_TCR_CS_LEVEL] = BIT(7), |
| [SPI_TCR_SDC] = BIT(11), |
| [SPI_TCR_SDM] = BIT(13), |
| [SPI_TCR_XCH] = BIT(31), |
| [SPI_FCR_RF_RST] = BIT(15), |
| [SPI_FCR_TF_RST] = BIT(31), |
| [SPI_FSR_RF_CNT_MASK] = GENMASK(7, 0), |
| }; |
| |
| static const struct sun4i_spi_variant sun4i_a10_spi_variant = { |
| .regs = sun4i_spi_regs, |
| .bits = sun4i_spi_bits, |
| .fifo_depth = 64, |
| .has_clk_ctl = true, |
| }; |
| |
| static const struct sun4i_spi_variant sun6i_a31_spi_variant = { |
| .regs = sun6i_spi_regs, |
| .bits = sun6i_spi_bits, |
| .fifo_depth = 128, |
| .has_soft_reset = true, |
| .has_burst_ctl = true, |
| .has_clk_ctl = true, |
| }; |
| |
| static const struct sun4i_spi_variant sun8i_h3_spi_variant = { |
| .regs = sun6i_spi_regs, |
| .bits = sun6i_spi_bits, |
| .fifo_depth = 64, |
| .has_soft_reset = true, |
| .has_burst_ctl = true, |
| .has_clk_ctl = true, |
| }; |
| |
| static const struct sun4i_spi_variant sun50i_r329_spi_variant = { |
| .regs = sun6i_spi_regs, |
| .bits = sun6i_spi_bits, |
| .fifo_depth = 64, |
| .has_soft_reset = true, |
| .has_burst_ctl = true, |
| }; |
| |
| static const struct udevice_id sun4i_spi_ids[] = { |
| { |
| .compatible = "allwinner,sun4i-a10-spi", |
| .data = (ulong)&sun4i_a10_spi_variant, |
| }, |
| { |
| .compatible = "allwinner,sun6i-a31-spi", |
| .data = (ulong)&sun6i_a31_spi_variant, |
| }, |
| { |
| .compatible = "allwinner,sun8i-h3-spi", |
| .data = (ulong)&sun8i_h3_spi_variant, |
| }, |
| { |
| .compatible = "allwinner,sun50i-r329-spi", |
| .data = (ulong)&sun50i_r329_spi_variant, |
| }, |
| { /* sentinel */ } |
| }; |
| |
| U_BOOT_DRIVER(sun4i_spi) = { |
| .name = "sun4i_spi", |
| .id = UCLASS_SPI, |
| .of_match = sun4i_spi_ids, |
| .ops = &sun4i_spi_ops, |
| .of_to_plat = sun4i_spi_of_to_plat, |
| .plat_auto = sizeof(struct sun4i_spi_plat), |
| .priv_auto = sizeof(struct sun4i_spi_priv), |
| .probe = sun4i_spi_probe, |
| }; |