arch/arm/dts/stm32mp15xx-dhcor-drc-compact-u-boot.dtsi

// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
 * Copyright (C) 2022 Marek Vasut <marex@denx.de>
 */

#include "stm32mp15xx-dhcor-u-boot.dtsi"

/delete-node/ &ksz8851;

/ {
	aliases {
		mmc0 = &sdmmc1;
		mmc1 = &sdmmc2;
		usb0 = &usbotg_hs;
		ethernet1 = &ks8851;
	};

	config {
		dh,board-coding-gpios = <&gpioh 9 0>, <&gpioh 8 0>, <&gpioh 3 0>;
	};

	/* This is actually on FMC2, but we do not have bus driver for that */
	ks8851: ks8851mll@64000000 {
		compatible = "micrel,ks8851-mll";
		reg = <0x64000000 0x20000>;
	};
};

&ethernet0 {
	phy-reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;

	mdio0 {
		ethernet-phy@7 {
			reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
			reset-assert-us = <11000>;
			reset-deassert-us = <1000>;
		};
	};
};

&pinctrl {
	/* These should bound to FMC2 bus driver, but we do not have one */
	pinctrl-0 = <&fmc_pins_b>;
	pinctrl-1 = <&fmc_sleep_pins_b>;
	pinctrl-names = "default", "sleep";
};

&sdmmc1 {
	u-boot,dm-spl;
	st,use-ckin;
	st,cmd-gpios = <&gpiod 2 0>;
	st,ck-gpios = <&gpioc 12 0>;
	st,ckin-gpios = <&gpioe 4 0>;
};

&sdmmc1_b4_pins_a {
	u-boot,dm-spl;
	pins1 {
		u-boot,dm-spl;
	};
	pins2 {
		u-boot,dm-spl;
	};
};

&sdmmc1_dir_pins_b {
	u-boot,dm-spl;
	pins1 {
		u-boot,dm-spl;
	};
	pins2 {
		u-boot,dm-spl;
	};
};

&sdmmc2 {
	u-boot,dm-spl;
};

&sdmmc2_b4_pins_a {
	u-boot,dm-spl;
	pins1 {
		u-boot,dm-spl;
	};
	pins2 {
		u-boot,dm-spl;
	};
};

&sdmmc2_d47_pins_c {
	u-boot,dm-spl;
	pins {
		u-boot,dm-spl;
	};
};

&sdmmc3 {	/* SDIO Wi-Fi */
	status = "disabled";
};

&uart4 {
	u-boot,dm-pre-reloc;
};

&uart4_pins_d {
	u-boot,dm-pre-reloc;
	pins1 {
		u-boot,dm-pre-reloc;
	};
	pins2 {
		u-boot,dm-pre-reloc;
		/delete-property/ bias-disable;
		bias-pull-up;
	};
};

&usbotg_hs {
	u-boot,force-b-session-valid;
	hnp-srp-disable;
};