arch/arm/mach-imx/imx8m/clock_imx8mq.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2017 NXP
  *
  * Peng Fan <peng.fan@nxp.com>
  */

 #include <common.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include <errno.h>
 #include <linux/iopoll.h>

 static struct anamix_pll *ana_pll = (struct anamix_pll *)ANATOP_BASE_ADDR;

 static u32 get_root_clk(enum clk_root_index clock_id);

 static u32 decode_frac_pll(enum clk_root_src frac_pll)
 {
 	u32 pll_cfg0, pll_cfg1, pllout;
 	u32 pll_refclk_sel, pll_refclk;
 	u32 divr_val, divq_val, divf_val, divff, divfi;
 	u32 pllout_div_shift, pllout_div_mask, pllout_div;

 	switch (frac_pll) {
 	case ARM_PLL_CLK:
 		pll_cfg0 = readl(&ana_pll->arm_pll_cfg0);
 		pll_cfg1 = readl(&ana_pll->arm_pll_cfg1);
 		pllout_div_shift = HW_FRAC_ARM_PLL_DIV_SHIFT;
 		pllout_div_mask = HW_FRAC_ARM_PLL_DIV_MASK;
 		break;
 	default:
 		printf("Frac PLL %d not supporte\n", frac_pll);
 		return 0;
 	}

 	pllout_div = readl(&ana_pll->frac_pllout_div_cfg);
 	pllout_div = (pllout_div & pllout_div_mask) >> pllout_div_shift;

 	/* Power down */
 	if (pll_cfg0 & FRAC_PLL_PD_MASK)
 		return 0;

 	/* output not enabled */
 	if ((pll_cfg0 & FRAC_PLL_CLKE_MASK) == 0)
 		return 0;

 	pll_refclk_sel = pll_cfg0 & FRAC_PLL_REFCLK_SEL_MASK;

 	if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_OSC_25M)
 		pll_refclk = 25000000u;
 	else if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_OSC_27M)
 		pll_refclk = 27000000u;
 	else if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_HDMI_PHY_27M)
 		pll_refclk = 27000000u;
 	else
 		pll_refclk = 0;

 	if (pll_cfg0 & FRAC_PLL_BYPASS_MASK)
 		return pll_refclk;

 	divr_val = (pll_cfg0 & FRAC_PLL_REFCLK_DIV_VAL_MASK) >>
 		FRAC_PLL_REFCLK_DIV_VAL_SHIFT;
 	divq_val = pll_cfg0 & FRAC_PLL_OUTPUT_DIV_VAL_MASK;

 	divff = (pll_cfg1 & FRAC_PLL_FRAC_DIV_CTL_MASK) >>
 		FRAC_PLL_FRAC_DIV_CTL_SHIFT;
 	divfi = pll_cfg1 & FRAC_PLL_INT_DIV_CTL_MASK;

 	divf_val = 1 + divfi + divff / (1 << 24);

 	pllout = pll_refclk / (divr_val + 1) * 8 * divf_val /
 		((divq_val + 1) * 2);

 	return pllout / (pllout_div + 1);
 }

 static u32 decode_sscg_pll(enum clk_root_src sscg_pll)
 {
 	u32 pll_cfg0, pll_cfg1, pll_cfg2;
 	u32 pll_refclk_sel, pll_refclk;
 	u32 divr1, divr2, divf1, divf2, divq, div;
 	u32 sse;
 	u32 pll_clke;
 	u32 pllout_div_shift, pllout_div_mask, pllout_div;
 	u32 pllout;

 	switch (sscg_pll) {
 	case SYSTEM_PLL1_800M_CLK:
 	case SYSTEM_PLL1_400M_CLK:
 	case SYSTEM_PLL1_266M_CLK:
 	case SYSTEM_PLL1_200M_CLK:
 	case SYSTEM_PLL1_160M_CLK:
 	case SYSTEM_PLL1_133M_CLK:
 	case SYSTEM_PLL1_100M_CLK:
 	case SYSTEM_PLL1_80M_CLK:
 	case SYSTEM_PLL1_40M_CLK:
 		pll_cfg0 = readl(&ana_pll->sys_pll1_cfg0);
 		pll_cfg1 = readl(&ana_pll->sys_pll1_cfg1);
 		pll_cfg2 = readl(&ana_pll->sys_pll1_cfg2);
 		pllout_div_shift = HW_SSCG_SYSTEM_PLL1_DIV_SHIFT;
 		pllout_div_mask = HW_SSCG_SYSTEM_PLL1_DIV_MASK;
 		break;
 	case SYSTEM_PLL2_1000M_CLK:
 	case SYSTEM_PLL2_500M_CLK:
 	case SYSTEM_PLL2_333M_CLK:
 	case SYSTEM_PLL2_250M_CLK:
 	case SYSTEM_PLL2_200M_CLK:
 	case SYSTEM_PLL2_166M_CLK:
 	case SYSTEM_PLL2_125M_CLK:
 	case SYSTEM_PLL2_100M_CLK:
 	case SYSTEM_PLL2_50M_CLK:
 		pll_cfg0 = readl(&ana_pll->sys_pll2_cfg0);
 		pll_cfg1 = readl(&ana_pll->sys_pll2_cfg1);
 		pll_cfg2 = readl(&ana_pll->sys_pll2_cfg2);
 		pllout_div_shift = HW_SSCG_SYSTEM_PLL2_DIV_SHIFT;
 		pllout_div_mask = HW_SSCG_SYSTEM_PLL2_DIV_MASK;
 		break;
 	case SYSTEM_PLL3_CLK:
 		pll_cfg0 = readl(&ana_pll->sys_pll3_cfg0);
 		pll_cfg1 = readl(&ana_pll->sys_pll3_cfg1);
 		pll_cfg2 = readl(&ana_pll->sys_pll3_cfg2);
 		pllout_div_shift = HW_SSCG_SYSTEM_PLL3_DIV_SHIFT;
 		pllout_div_mask = HW_SSCG_SYSTEM_PLL3_DIV_MASK;
 		break;
 	case DRAM_PLL1_CLK:
 		pll_cfg0 = readl(&ana_pll->dram_pll_cfg0);
 		pll_cfg1 = readl(&ana_pll->dram_pll_cfg1);
 		pll_cfg2 = readl(&ana_pll->dram_pll_cfg2);
 		pllout_div_shift = HW_SSCG_DRAM_PLL_DIV_SHIFT;
 		pllout_div_mask = HW_SSCG_DRAM_PLL_DIV_MASK;
 		break;
 	default:
 		printf("sscg pll %d not supporte\n", sscg_pll);
 		return 0;
 	}

 	switch (sscg_pll) {
 	case DRAM_PLL1_CLK:
 		pll_clke = SSCG_PLL_DRAM_PLL_CLKE_MASK;
 		div = 1;
 		break;
 	case SYSTEM_PLL3_CLK:
 		pll_clke = SSCG_PLL_PLL3_CLKE_MASK;
 		div = 1;
 		break;
 	case SYSTEM_PLL2_1000M_CLK:
 	case SYSTEM_PLL1_800M_CLK:
 		pll_clke = SSCG_PLL_CLKE_MASK;
 		div = 1;
 		break;
 	case SYSTEM_PLL2_500M_CLK:
 	case SYSTEM_PLL1_400M_CLK:
 		pll_clke = SSCG_PLL_DIV2_CLKE_MASK;
 		div = 2;
 		break;
 	case SYSTEM_PLL2_333M_CLK:
 	case SYSTEM_PLL1_266M_CLK:
 		pll_clke = SSCG_PLL_DIV3_CLKE_MASK;
 		div = 3;
 		break;
 	case SYSTEM_PLL2_250M_CLK:
 	case SYSTEM_PLL1_200M_CLK:
 		pll_clke = SSCG_PLL_DIV4_CLKE_MASK;
 		div = 4;
 		break;
 	case SYSTEM_PLL2_200M_CLK:
 	case SYSTEM_PLL1_160M_CLK:
 		pll_clke = SSCG_PLL_DIV5_CLKE_MASK;
 		div = 5;
 		break;
 	case SYSTEM_PLL2_166M_CLK:
 	case SYSTEM_PLL1_133M_CLK:
 		pll_clke = SSCG_PLL_DIV6_CLKE_MASK;
 		div = 6;
 		break;
 	case SYSTEM_PLL2_125M_CLK:
 	case SYSTEM_PLL1_100M_CLK:
 		pll_clke = SSCG_PLL_DIV8_CLKE_MASK;
 		div = 8;
 		break;
 	case SYSTEM_PLL2_100M_CLK:
 	case SYSTEM_PLL1_80M_CLK:
 		pll_clke = SSCG_PLL_DIV10_CLKE_MASK;
 		div = 10;
 		break;
 	case SYSTEM_PLL2_50M_CLK:
 	case SYSTEM_PLL1_40M_CLK:
 		pll_clke = SSCG_PLL_DIV20_CLKE_MASK;
 		div = 20;
 		break;
 	default:
 		printf("sscg pll %d not supporte\n", sscg_pll);
 		return 0;
 	}

 	/* Power down */
 	if (pll_cfg0 & SSCG_PLL_PD_MASK)
 		return 0;

 	/* output not enabled */
 	if ((pll_cfg0 & pll_clke) == 0)
 		return 0;

 	pllout_div = readl(&ana_pll->sscg_pllout_div_cfg);
 	pllout_div = (pllout_div & pllout_div_mask) >> pllout_div_shift;

 	pll_refclk_sel = pll_cfg0 & SSCG_PLL_REFCLK_SEL_MASK;

 	if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_OSC_25M)
 		pll_refclk = 25000000u;
 	else if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_OSC_27M)
 		pll_refclk = 27000000u;
 	else if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_HDMI_PHY_27M)
 		pll_refclk = 27000000u;
 	else
 		pll_refclk = 0;

 	/* We assume bypass1/2 are the same value */
 	if ((pll_cfg0 & SSCG_PLL_BYPASS1_MASK) ||
 	    (pll_cfg0 & SSCG_PLL_BYPASS2_MASK))
 		return pll_refclk;

 	divr1 = (pll_cfg2 & SSCG_PLL_REF_DIVR1_MASK) >>
 		SSCG_PLL_REF_DIVR1_SHIFT;
 	divr2 = (pll_cfg2 & SSCG_PLL_REF_DIVR2_MASK) >>
 		SSCG_PLL_REF_DIVR2_SHIFT;
 	divf1 = (pll_cfg2 & SSCG_PLL_FEEDBACK_DIV_F1_MASK) >>
 		SSCG_PLL_FEEDBACK_DIV_F1_SHIFT;
 	divf2 = (pll_cfg2 & SSCG_PLL_FEEDBACK_DIV_F2_MASK) >>
 		SSCG_PLL_FEEDBACK_DIV_F2_SHIFT;
 	divq = (pll_cfg2 & SSCG_PLL_OUTPUT_DIV_VAL_MASK) >>
 		SSCG_PLL_OUTPUT_DIV_VAL_SHIFT;
 	sse = pll_cfg1 & SSCG_PLL_SSE_MASK;

 	if (sse)
 		sse = 8;
 	else
 		sse = 2;

 	pllout = pll_refclk / (divr1 + 1) * sse * (divf1 + 1) /
 		(divr2 + 1) * (divf2 + 1) / (divq + 1);

 	return pllout / (pllout_div + 1) / div;
 }

 static u32 get_root_src_clk(enum clk_root_src root_src)
 {
 	switch (root_src) {
 	case OSC_25M_CLK:
 		return 25000000;
 	case OSC_27M_CLK:
 		return 27000000;
 	case OSC_32K_CLK:
 		return 32768;
 	case ARM_PLL_CLK:
 		return decode_frac_pll(root_src);
 	case SYSTEM_PLL1_800M_CLK:
 	case SYSTEM_PLL1_400M_CLK:
 	case SYSTEM_PLL1_266M_CLK:
 	case SYSTEM_PLL1_200M_CLK:
 	case SYSTEM_PLL1_160M_CLK:
 	case SYSTEM_PLL1_133M_CLK:
 	case SYSTEM_PLL1_100M_CLK:
 	case SYSTEM_PLL1_80M_CLK:
 	case SYSTEM_PLL1_40M_CLK:
 	case SYSTEM_PLL2_1000M_CLK:
 	case SYSTEM_PLL2_500M_CLK:
 	case SYSTEM_PLL2_333M_CLK:
 	case SYSTEM_PLL2_250M_CLK:
 	case SYSTEM_PLL2_200M_CLK:
 	case SYSTEM_PLL2_166M_CLK:
 	case SYSTEM_PLL2_125M_CLK:
 	case SYSTEM_PLL2_100M_CLK:
 	case SYSTEM_PLL2_50M_CLK:
 	case SYSTEM_PLL3_CLK:
 		return decode_sscg_pll(root_src);
 	case ARM_A53_ALT_CLK:
 		return get_root_clk(ARM_A53_CLK_ROOT);
 	default:
 		return 0;
 	}

 	return 0;
 }

 static u32 get_root_clk(enum clk_root_index clock_id)
 {
 	enum clk_root_src root_src;
 	u32 post_podf, pre_podf, root_src_clk;

 	if (clock_root_enabled(clock_id) <= 0)
 		return 0;

 	if (clock_get_prediv(clock_id, &pre_podf) < 0)
 		return 0;

 	if (clock_get_postdiv(clock_id, &post_podf) < 0)
 		return 0;

 	if (clock_get_src(clock_id, &root_src) < 0)
 		return 0;

 	root_src_clk = get_root_src_clk(root_src);

 	return root_src_clk / (post_podf + 1) / (pre_podf + 1);
 }

 #ifdef CONFIG_MXC_OCOTP
 void enable_ocotp_clk(unsigned char enable)
 {
 	clock_enable(CCGR_OCOTP, !!enable);
 }
 #endif

 int enable_i2c_clk(unsigned char enable, unsigned int i2c_num)
 {
 	/* 0 - 3 is valid i2c num */
 	if (i2c_num > 3)
 		return -EINVAL;

 	clock_enable(CCGR_I2C1 + i2c_num, !!enable);

 	return 0;
 }

 u32 get_arm_core_clk(void)
 {
 	enum clk_root_src root_src;
 	u32 root_src_clk;

 	if (clock_get_src(CORE_SEL_CFG, &root_src) < 0)
 		return 0;

 	root_src_clk = get_root_src_clk(root_src);

 	return root_src_clk;
 }

 unsigned int mxc_get_clock(enum mxc_clock clk)
 {
 	u32 val;

 	switch (clk) {
 	case MXC_ARM_CLK:
 		return get_arm_core_clk();
 	case MXC_IPG_CLK:
 		clock_get_target_val(IPG_CLK_ROOT, &val);
 		val = val & 0x3;
 		return get_root_clk(AHB_CLK_ROOT) / (val + 1);
 	case MXC_ESDHC_CLK:
 		return get_root_clk(USDHC1_CLK_ROOT);
 	case MXC_ESDHC2_CLK:
 		return get_root_clk(USDHC2_CLK_ROOT);
 	default:
 		return get_root_clk(clk);
 	}
 }

 u32 imx_get_uartclk(void)
 {
 	return mxc_get_clock(UART1_CLK_ROOT);
 }

 void mxs_set_lcdclk(u32 base_addr, u32 freq)
 {
 	/*
 	 * LCDIF_PIXEL_CLK: select 800MHz root clock,
 	 * select pre divider 8, output is 100 MHz
 	 */
 	clock_set_target_val(LCDIF_PIXEL_CLK_ROOT, CLK_ROOT_ON |
 			     CLK_ROOT_SOURCE_SEL(4) |
 			     CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV8));
 }

 void init_wdog_clk(void)
 {
 	clock_enable(CCGR_WDOG1, 0);
 	clock_enable(CCGR_WDOG2, 0);
 	clock_enable(CCGR_WDOG3, 0);
 	clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
 			     CLK_ROOT_SOURCE_SEL(0));
 	clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
 			     CLK_ROOT_SOURCE_SEL(0));
 	clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON |
 			     CLK_ROOT_SOURCE_SEL(0));
 	clock_enable(CCGR_WDOG1, 1);
 	clock_enable(CCGR_WDOG2, 1);
 	clock_enable(CCGR_WDOG3, 1);
 }


 void init_nand_clk(void)
 {
 	clock_enable(CCGR_RAWNAND, 0);
 	clock_set_target_val(NAND_CLK_ROOT,
 			     CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(3) |
 			     CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4));
 	clock_enable(CCGR_RAWNAND, 1);
 }

 void init_uart_clk(u32 index)
 {
 	/* Set uart clock root 25M OSC */
 	switch (index) {
 	case 0:
 		clock_enable(CCGR_UART1, 0);
 		clock_set_target_val(UART1_CLK_ROOT, CLK_ROOT_ON |
 				     CLK_ROOT_SOURCE_SEL(0));
 		clock_enable(CCGR_UART1, 1);
 		return;
 	case 1:
 		clock_enable(CCGR_UART2, 0);
 		clock_set_target_val(UART2_CLK_ROOT, CLK_ROOT_ON |
 				     CLK_ROOT_SOURCE_SEL(0));
 		clock_enable(CCGR_UART2, 1);
 		return;
 	case 2:
 		clock_enable(CCGR_UART3, 0);
 		clock_set_target_val(UART3_CLK_ROOT, CLK_ROOT_ON |
 				     CLK_ROOT_SOURCE_SEL(0));
 		clock_enable(CCGR_UART3, 1);
 		return;
 	case 3:
 		clock_enable(CCGR_UART4, 0);
 		clock_set_target_val(UART4_CLK_ROOT, CLK_ROOT_ON |
 				     CLK_ROOT_SOURCE_SEL(0));
 		clock_enable(CCGR_UART4, 1);
 		return;
 	default:
 		printf("Invalid uart index\n");
 		return;
 	}
 }

 void init_clk_usdhc(u32 index)
 {
 	/*
 	 * set usdhc clock root
 	 * sys pll1 400M
 	 */
 	switch (index) {
 	case 0:
 		clock_enable(CCGR_USDHC1, 0);
 		clock_set_target_val(USDHC1_CLK_ROOT, CLK_ROOT_ON |
 				     CLK_ROOT_SOURCE_SEL(1));
 		clock_enable(CCGR_USDHC1, 1);
 		return;
 	case 1:
 		clock_enable(CCGR_USDHC2, 0);
 		clock_set_target_val(USDHC2_CLK_ROOT, CLK_ROOT_ON |
 				     CLK_ROOT_SOURCE_SEL(1));
 		clock_enable(CCGR_USDHC2, 1);
 		return;
 	default:
 		printf("Invalid usdhc index\n");
 		return;
 	}
 }

 int set_clk_qspi(void)
 {
 	/*
 	 * set qspi root
 	 * sys pll1 100M
 	 */
 	clock_enable(CCGR_QSPI, 0);
 	clock_set_target_val(QSPI_CLK_ROOT, CLK_ROOT_ON |
 			     CLK_ROOT_SOURCE_SEL(7));
 	clock_enable(CCGR_QSPI, 1);

 	return 0;
 }

 #ifdef CONFIG_FEC_MXC
 int set_clk_enet(enum enet_freq type)
 {
 	u32 target;
 	u32 enet1_ref;

 	switch (type) {
 	case ENET_125MHZ:
 		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
 		break;
 	case ENET_50MHZ:
 		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
 		break;
 	case ENET_25MHZ:
 		enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
 		break;
 	default:
 		return -EINVAL;
 	}

 	/* disable the clock first */
 	clock_enable(CCGR_ENET1, 0);
 	clock_enable(CCGR_SIM_ENET, 0);

 	/* set enet axi clock 266Mhz */
 	target = CLK_ROOT_ON | ENET_AXI_CLK_ROOT_FROM_SYS1_PLL_266M |
 		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
 		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
 	clock_set_target_val(ENET_AXI_CLK_ROOT, target);

 	target = CLK_ROOT_ON | enet1_ref |
 		 CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
 		 CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
 	clock_set_target_val(ENET_REF_CLK_ROOT, target);

 	target = CLK_ROOT_ON |
 		ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK |
 		CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
 		CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
 	clock_set_target_val(ENET_TIMER_CLK_ROOT, target);

 	/* enable clock */
 	clock_enable(CCGR_SIM_ENET, 1);
 	clock_enable(CCGR_ENET1, 1);

 	return 0;
 }
 #endif

 u32 imx_get_fecclk(void)
 {
 	return get_root_clk(ENET_AXI_CLK_ROOT);
 }

 static struct dram_bypass_clk_setting imx8mq_dram_bypass_tbl[] = {
 	DRAM_BYPASS_ROOT_CONFIG(MHZ(100), 2, CLK_ROOT_PRE_DIV1, 2,
 				CLK_ROOT_PRE_DIV2),
 	DRAM_BYPASS_ROOT_CONFIG(MHZ(250), 3, CLK_ROOT_PRE_DIV2, 2,
 				CLK_ROOT_PRE_DIV2),
 	DRAM_BYPASS_ROOT_CONFIG(MHZ(400), 1, CLK_ROOT_PRE_DIV2, 3,
 				CLK_ROOT_PRE_DIV2),
 };

 void dram_enable_bypass(ulong clk_val)
 {
 	int i;
 	struct dram_bypass_clk_setting *config;

 	for (i = 0; i < ARRAY_SIZE(imx8mq_dram_bypass_tbl); i++) {
 		if (clk_val == imx8mq_dram_bypass_tbl[i].clk)
 			break;
 	}

 	if (i == ARRAY_SIZE(imx8mq_dram_bypass_tbl)) {
 		printf("No matched freq table %lu\n", clk_val);
 		return;
 	}

 	config = &imx8mq_dram_bypass_tbl[i];

 	clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON |
 			     CLK_ROOT_SOURCE_SEL(config->alt_root_sel) |
 			     CLK_ROOT_PRE_DIV(config->alt_pre_div));
 	clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
 			     CLK_ROOT_SOURCE_SEL(config->apb_root_sel) |
 			     CLK_ROOT_PRE_DIV(config->apb_pre_div));
 	clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
 			     CLK_ROOT_SOURCE_SEL(1));
 }

 void dram_disable_bypass(void)
 {
 	clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON |
 			     CLK_ROOT_SOURCE_SEL(0));
 	clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON |
 			     CLK_ROOT_SOURCE_SEL(4) |
 			     CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5));
 }

 #ifdef CONFIG_SPL_BUILD
 void dram_pll_init(ulong pll_val)
 {
 	u32 val;
 	void __iomem *pll_control_reg = &ana_pll->dram_pll_cfg0;
 	void __iomem *pll_cfg_reg2 = &ana_pll->dram_pll_cfg2;

 	/* Bypass */
 	setbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK);
 	setbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK);

 	switch (pll_val) {
 	case MHZ(800):
 		val = readl(pll_cfg_reg2);
 		val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
 			 SSCG_PLL_FEEDBACK_DIV_F2_MASK |
 			 SSCG_PLL_FEEDBACK_DIV_F1_MASK |
 			 SSCG_PLL_REF_DIVR2_MASK);
 		val |= SSCG_PLL_OUTPUT_DIV_VAL(0);
 		val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11);
 		val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
 		val |= SSCG_PLL_REF_DIVR2_VAL(29);
 		writel(val, pll_cfg_reg2);
 		break;
 	case MHZ(600):
 		val = readl(pll_cfg_reg2);
 		val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
 			 SSCG_PLL_FEEDBACK_DIV_F2_MASK |
 			 SSCG_PLL_FEEDBACK_DIV_F1_MASK |
 			 SSCG_PLL_REF_DIVR2_MASK);
 		val |= SSCG_PLL_OUTPUT_DIV_VAL(1);
 		val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(17);
 		val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
 		val |= SSCG_PLL_REF_DIVR2_VAL(29);
 		writel(val, pll_cfg_reg2);
 		break;
 	case MHZ(400):
 		val = readl(pll_cfg_reg2);
 		val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
 			 SSCG_PLL_FEEDBACK_DIV_F2_MASK |
 			 SSCG_PLL_FEEDBACK_DIV_F1_MASK |
 			 SSCG_PLL_REF_DIVR2_MASK);
 		val |= SSCG_PLL_OUTPUT_DIV_VAL(1);
 		val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11);
 		val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
 		val |= SSCG_PLL_REF_DIVR2_VAL(29);
 		writel(val, pll_cfg_reg2);
 		break;
 	case MHZ(167):
 		val = readl(pll_cfg_reg2);
 		val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK |
 			 SSCG_PLL_FEEDBACK_DIV_F2_MASK |
 			 SSCG_PLL_FEEDBACK_DIV_F1_MASK |
 			 SSCG_PLL_REF_DIVR2_MASK);
 		val |= SSCG_PLL_OUTPUT_DIV_VAL(3);
 		val |= SSCG_PLL_FEEDBACK_DIV_F2_VAL(8);
 		val |= SSCG_PLL_FEEDBACK_DIV_F1_VAL(45);
 		val |= SSCG_PLL_REF_DIVR2_VAL(30);
 		writel(val, pll_cfg_reg2);
 		break;
 	default:
 		break;
 	}

 	/* Clear power down bit */
 	clrbits_le32(pll_control_reg, SSCG_PLL_PD_MASK);
 	/* Eanble ARM_PLL/SYS_PLL  */
 	setbits_le32(pll_control_reg, SSCG_PLL_DRAM_PLL_CLKE_MASK);

 	/* Clear bypass */
 	clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK);
 	__udelay(100);
 	clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK);
 	/* Wait lock */
 	while (!(readl(pll_control_reg) & SSCG_PLL_LOCK_MASK))
 		;
 }

 static int frac_pll_init(u32 pll, enum frac_pll_out_val val)
 {
 	void __iomem *pll_cfg0, __iomem *pll_cfg1;
 	u32 val_cfg0, val_cfg1, divq;
 	int ret;

 	switch (pll) {
 	case ANATOP_ARM_PLL:
 		pll_cfg0 = &ana_pll->arm_pll_cfg0;
 		pll_cfg1 = &ana_pll->arm_pll_cfg1;

 		if (val == FRAC_PLL_OUT_1000M) {
 			val_cfg1 = FRAC_PLL_INT_DIV_CTL_VAL(49);
 			divq = 0;
 		} else {
 			val_cfg1 = FRAC_PLL_INT_DIV_CTL_VAL(79);
 			divq = 1;
 		}
 		val_cfg0 = FRAC_PLL_CLKE_MASK | FRAC_PLL_REFCLK_SEL_OSC_25M |
 			FRAC_PLL_LOCK_SEL_MASK | FRAC_PLL_NEWDIV_VAL_MASK |
 			FRAC_PLL_REFCLK_DIV_VAL(4) |
 			FRAC_PLL_OUTPUT_DIV_VAL(divq);
 		break;
 	default:
 		return -EINVAL;
 	}

 	/* bypass the clock */
 	setbits_le32(pll_cfg0, FRAC_PLL_BYPASS_MASK);
 	/* Set the value */
 	writel(val_cfg1, pll_cfg1);
 	writel(val_cfg0 | FRAC_PLL_BYPASS_MASK, pll_cfg0);
 	val_cfg0 = readl(pll_cfg0);
 	/* unbypass the clock */
 	clrbits_le32(pll_cfg0, FRAC_PLL_BYPASS_MASK);
 	ret = readl_poll_timeout(pll_cfg0, val_cfg0,
 				 val_cfg0 & FRAC_PLL_LOCK_MASK, 1);
 	if (ret)
 		printf("%s timeout\n", __func__);
 	clrbits_le32(pll_cfg0, FRAC_PLL_NEWDIV_VAL_MASK);

 	return 0;
 }


 int clock_init(void)
 {
 	u32 grade;

 	clock_set_target_val(ARM_A53_CLK_ROOT, CLK_ROOT_ON |
 			     CLK_ROOT_SOURCE_SEL(0));

 	/*
 	 * 8MQ only supports two grades: consumer and industrial.
 	 * We set ARM clock to 1Ghz for consumer, 800Mhz for industrial
 	 */
 	grade = get_cpu_temp_grade(NULL, NULL);
 	if (!grade)
 		frac_pll_init(ANATOP_ARM_PLL, FRAC_PLL_OUT_1000M);
 	else
 		frac_pll_init(ANATOP_ARM_PLL, FRAC_PLL_OUT_800M);

 	/* Bypass CCM A53 ROOT, Switch to ARM PLL -> MUX-> CPU */
 	clock_set_target_val(CORE_SEL_CFG, CLK_ROOT_SOURCE_SEL(1));

 	/*
 	 * According to ANAMIX SPEC
 	 * sys pll1 fixed at 800MHz
 	 * sys pll2 fixed at 1GHz
 	 * Here we only enable the outputs.
 	 */
 	setbits_le32(&ana_pll->sys_pll1_cfg0, SSCG_PLL_CLKE_MASK |
 		     SSCG_PLL_DIV2_CLKE_MASK | SSCG_PLL_DIV3_CLKE_MASK |
 		     SSCG_PLL_DIV4_CLKE_MASK | SSCG_PLL_DIV5_CLKE_MASK |
 		     SSCG_PLL_DIV6_CLKE_MASK | SSCG_PLL_DIV8_CLKE_MASK |
 		     SSCG_PLL_DIV10_CLKE_MASK | SSCG_PLL_DIV20_CLKE_MASK);

 	setbits_le32(&ana_pll->sys_pll2_cfg0, SSCG_PLL_CLKE_MASK |
 		     SSCG_PLL_DIV2_CLKE_MASK | SSCG_PLL_DIV3_CLKE_MASK |
 		     SSCG_PLL_DIV4_CLKE_MASK | SSCG_PLL_DIV5_CLKE_MASK |
 		     SSCG_PLL_DIV6_CLKE_MASK | SSCG_PLL_DIV8_CLKE_MASK |
 		     SSCG_PLL_DIV10_CLKE_MASK | SSCG_PLL_DIV20_CLKE_MASK);

 	clock_set_target_val(NAND_USDHC_BUS_CLK_ROOT, CLK_ROOT_ON |
 			     CLK_ROOT_SOURCE_SEL(1));

 	init_wdog_clk();
 	clock_enable(CCGR_TSENSOR, 1);
 	clock_enable(CCGR_OCOTP, 1);

 	/* config GIC ROOT to sys_pll2_200m */
 	clock_enable(CCGR_GIC, 0);
 	clock_set_target_val(GIC_CLK_ROOT,
 			     CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(1));
 	clock_enable(CCGR_GIC, 1);

 	return 0;
 }
 #endif

 /*
  * Dump some clockes.
  */
 #ifndef CONFIG_SPL_BUILD
 static int do_imx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc,
 		       char * const argv[])
 {
 	u32 freq;

 	freq = decode_frac_pll(ARM_PLL_CLK);
 	printf("ARM_PLL    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(DRAM_PLL1_CLK);
 	printf("DRAM_PLL    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL1_800M_CLK);
 	printf("SYS_PLL1_800    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL1_400M_CLK);
 	printf("SYS_PLL1_400    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL1_266M_CLK);
 	printf("SYS_PLL1_266    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL1_200M_CLK);
 	printf("SYS_PLL1_200    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL1_160M_CLK);
 	printf("SYS_PLL1_160    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL1_133M_CLK);
 	printf("SYS_PLL1_133    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL1_100M_CLK);
 	printf("SYS_PLL1_100    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL1_80M_CLK);
 	printf("SYS_PLL1_80    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL1_40M_CLK);
 	printf("SYS_PLL1_40    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL2_1000M_CLK);
 	printf("SYS_PLL2_1000    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL2_500M_CLK);
 	printf("SYS_PLL2_500    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL2_333M_CLK);
 	printf("SYS_PLL2_333    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL2_250M_CLK);
 	printf("SYS_PLL2_250    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL2_200M_CLK);
 	printf("SYS_PLL2_200    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL2_166M_CLK);
 	printf("SYS_PLL2_166    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL2_125M_CLK);
 	printf("SYS_PLL2_125    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL2_100M_CLK);
 	printf("SYS_PLL2_100    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL2_50M_CLK);
 	printf("SYS_PLL2_50    %8d MHz\n", freq / 1000000);
 	freq = decode_sscg_pll(SYSTEM_PLL3_CLK);
 	printf("SYS_PLL3       %8d MHz\n", freq / 1000000);
 	freq = mxc_get_clock(UART1_CLK_ROOT);
 	printf("UART1          %8d MHz\n", freq / 1000000);
 	freq = mxc_get_clock(USDHC1_CLK_ROOT);
 	printf("USDHC1         %8d MHz\n", freq / 1000000);
 	freq = mxc_get_clock(QSPI_CLK_ROOT);
 	printf("QSPI           %8d MHz\n", freq / 1000000);
 	return 0;
 }

 U_BOOT_CMD(
 	clocks,	CONFIG_SYS_MAXARGS, 1, do_imx8m_showclocks,
 	"display clocks",
 	""
 );
 #endif
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Copyright 2017 NXP
	*
	* Peng Fan <peng.fan@nxp.com>
	*/

	#include <common.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/imx-regs.h>
	#include <asm/io.h>
	#include <asm/arch/sys_proto.h>
	#include <errno.h>
	#include <linux/iopoll.h>

	static struct anamix_pll ana_pll = (struct anamix_pll )ANATOP_BASE_ADDR;

	static u32 get_root_clk(enum clk_root_index clock_id);

	static u32 decode_frac_pll(enum clk_root_src frac_pll)
	{
	u32 pll_cfg0, pll_cfg1, pllout;
	u32 pll_refclk_sel, pll_refclk;
	u32 divr_val, divq_val, divf_val, divff, divfi;
	u32 pllout_div_shift, pllout_div_mask, pllout_div;

	switch (frac_pll) {
	case ARM_PLL_CLK:
	pll_cfg0 = readl(&ana_pll->arm_pll_cfg0);
	pll_cfg1 = readl(&ana_pll->arm_pll_cfg1);
	pllout_div_shift = HW_FRAC_ARM_PLL_DIV_SHIFT;
	pllout_div_mask = HW_FRAC_ARM_PLL_DIV_MASK;
	break;
	default:
	printf("Frac PLL %d not supporte\n", frac_pll);
	return 0;
	}

	pllout_div = readl(&ana_pll->frac_pllout_div_cfg);
	pllout_div = (pllout_div & pllout_div_mask) >> pllout_div_shift;

	/* Power down */
	if (pll_cfg0 & FRAC_PLL_PD_MASK)
	return 0;

	/* output not enabled */
	if ((pll_cfg0 & FRAC_PLL_CLKE_MASK) == 0)
	return 0;

	pll_refclk_sel = pll_cfg0 & FRAC_PLL_REFCLK_SEL_MASK;

	if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_OSC_25M)
	pll_refclk = 25000000u;
	else if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_OSC_27M)
	pll_refclk = 27000000u;
	else if (pll_refclk_sel == FRAC_PLL_REFCLK_SEL_HDMI_PHY_27M)
	pll_refclk = 27000000u;
	else
	pll_refclk = 0;

	if (pll_cfg0 & FRAC_PLL_BYPASS_MASK)
	return pll_refclk;

	divr_val = (pll_cfg0 & FRAC_PLL_REFCLK_DIV_VAL_MASK) >>
	FRAC_PLL_REFCLK_DIV_VAL_SHIFT;
	divq_val = pll_cfg0 & FRAC_PLL_OUTPUT_DIV_VAL_MASK;

	divff = (pll_cfg1 & FRAC_PLL_FRAC_DIV_CTL_MASK) >>
	FRAC_PLL_FRAC_DIV_CTL_SHIFT;
	divfi = pll_cfg1 & FRAC_PLL_INT_DIV_CTL_MASK;

	divf_val = 1 + divfi + divff / (1 << 24);

	pllout = pll_refclk / (divr_val + 1) * 8 * divf_val /
	((divq_val + 1) * 2);

	return pllout / (pllout_div + 1);
	}

	static u32 decode_sscg_pll(enum clk_root_src sscg_pll)
	{
	u32 pll_cfg0, pll_cfg1, pll_cfg2;
	u32 pll_refclk_sel, pll_refclk;
	u32 divr1, divr2, divf1, divf2, divq, div;
	u32 sse;
	u32 pll_clke;
	u32 pllout_div_shift, pllout_div_mask, pllout_div;
	u32 pllout;

	switch (sscg_pll) {
	case SYSTEM_PLL1_800M_CLK:
	case SYSTEM_PLL1_400M_CLK:
	case SYSTEM_PLL1_266M_CLK:
	case SYSTEM_PLL1_200M_CLK:
	case SYSTEM_PLL1_160M_CLK:
	case SYSTEM_PLL1_133M_CLK:
	case SYSTEM_PLL1_100M_CLK:
	case SYSTEM_PLL1_80M_CLK:
	case SYSTEM_PLL1_40M_CLK:
	pll_cfg0 = readl(&ana_pll->sys_pll1_cfg0);
	pll_cfg1 = readl(&ana_pll->sys_pll1_cfg1);
	pll_cfg2 = readl(&ana_pll->sys_pll1_cfg2);
	pllout_div_shift = HW_SSCG_SYSTEM_PLL1_DIV_SHIFT;
	pllout_div_mask = HW_SSCG_SYSTEM_PLL1_DIV_MASK;
	break;
	case SYSTEM_PLL2_1000M_CLK:
	case SYSTEM_PLL2_500M_CLK:
	case SYSTEM_PLL2_333M_CLK:
	case SYSTEM_PLL2_250M_CLK:
	case SYSTEM_PLL2_200M_CLK:
	case SYSTEM_PLL2_166M_CLK:
	case SYSTEM_PLL2_125M_CLK:
	case SYSTEM_PLL2_100M_CLK:
	case SYSTEM_PLL2_50M_CLK:
	pll_cfg0 = readl(&ana_pll->sys_pll2_cfg0);
	pll_cfg1 = readl(&ana_pll->sys_pll2_cfg1);
	pll_cfg2 = readl(&ana_pll->sys_pll2_cfg2);
	pllout_div_shift = HW_SSCG_SYSTEM_PLL2_DIV_SHIFT;
	pllout_div_mask = HW_SSCG_SYSTEM_PLL2_DIV_MASK;
	break;
	case SYSTEM_PLL3_CLK:
	pll_cfg0 = readl(&ana_pll->sys_pll3_cfg0);
	pll_cfg1 = readl(&ana_pll->sys_pll3_cfg1);
	pll_cfg2 = readl(&ana_pll->sys_pll3_cfg2);
	pllout_div_shift = HW_SSCG_SYSTEM_PLL3_DIV_SHIFT;
	pllout_div_mask = HW_SSCG_SYSTEM_PLL3_DIV_MASK;
	break;
	case DRAM_PLL1_CLK:
	pll_cfg0 = readl(&ana_pll->dram_pll_cfg0);
	pll_cfg1 = readl(&ana_pll->dram_pll_cfg1);
	pll_cfg2 = readl(&ana_pll->dram_pll_cfg2);
	pllout_div_shift = HW_SSCG_DRAM_PLL_DIV_SHIFT;
	pllout_div_mask = HW_SSCG_DRAM_PLL_DIV_MASK;
	break;
	default:
	printf("sscg pll %d not supporte\n", sscg_pll);
	return 0;
	}

	switch (sscg_pll) {
	case DRAM_PLL1_CLK:
	pll_clke = SSCG_PLL_DRAM_PLL_CLKE_MASK;
	div = 1;
	break;
	case SYSTEM_PLL3_CLK:
	pll_clke = SSCG_PLL_PLL3_CLKE_MASK;
	div = 1;
	break;
	case SYSTEM_PLL2_1000M_CLK:
	case SYSTEM_PLL1_800M_CLK:
	pll_clke = SSCG_PLL_CLKE_MASK;
	div = 1;
	break;
	case SYSTEM_PLL2_500M_CLK:
	case SYSTEM_PLL1_400M_CLK:
	pll_clke = SSCG_PLL_DIV2_CLKE_MASK;
	div = 2;
	break;
	case SYSTEM_PLL2_333M_CLK:
	case SYSTEM_PLL1_266M_CLK:
	pll_clke = SSCG_PLL_DIV3_CLKE_MASK;
	div = 3;
	break;
	case SYSTEM_PLL2_250M_CLK:
	case SYSTEM_PLL1_200M_CLK:
	pll_clke = SSCG_PLL_DIV4_CLKE_MASK;
	div = 4;
	break;
	case SYSTEM_PLL2_200M_CLK:
	case SYSTEM_PLL1_160M_CLK:
	pll_clke = SSCG_PLL_DIV5_CLKE_MASK;
	div = 5;
	break;
	case SYSTEM_PLL2_166M_CLK:
	case SYSTEM_PLL1_133M_CLK:
	pll_clke = SSCG_PLL_DIV6_CLKE_MASK;
	div = 6;
	break;
	case SYSTEM_PLL2_125M_CLK:
	case SYSTEM_PLL1_100M_CLK:
	pll_clke = SSCG_PLL_DIV8_CLKE_MASK;
	div = 8;
	break;
	case SYSTEM_PLL2_100M_CLK:
	case SYSTEM_PLL1_80M_CLK:
	pll_clke = SSCG_PLL_DIV10_CLKE_MASK;
	div = 10;
	break;
	case SYSTEM_PLL2_50M_CLK:
	case SYSTEM_PLL1_40M_CLK:
	pll_clke = SSCG_PLL_DIV20_CLKE_MASK;
	div = 20;
	break;
	default:
	printf("sscg pll %d not supporte\n", sscg_pll);
	return 0;
	}

	/* Power down */
	if (pll_cfg0 & SSCG_PLL_PD_MASK)
	return 0;

	/* output not enabled */
	if ((pll_cfg0 & pll_clke) == 0)
	return 0;

	pllout_div = readl(&ana_pll->sscg_pllout_div_cfg);
	pllout_div = (pllout_div & pllout_div_mask) >> pllout_div_shift;

	pll_refclk_sel = pll_cfg0 & SSCG_PLL_REFCLK_SEL_MASK;

	if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_OSC_25M)
	pll_refclk = 25000000u;
	else if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_OSC_27M)
	pll_refclk = 27000000u;
	else if (pll_refclk_sel == SSCG_PLL_REFCLK_SEL_HDMI_PHY_27M)
	pll_refclk = 27000000u;
	else
	pll_refclk = 0;

	/* We assume bypass1/2 are the same value */
	if ((pll_cfg0 & SSCG_PLL_BYPASS1_MASK) \|\|
	(pll_cfg0 & SSCG_PLL_BYPASS2_MASK))
	return pll_refclk;

	divr1 = (pll_cfg2 & SSCG_PLL_REF_DIVR1_MASK) >>
	SSCG_PLL_REF_DIVR1_SHIFT;
	divr2 = (pll_cfg2 & SSCG_PLL_REF_DIVR2_MASK) >>
	SSCG_PLL_REF_DIVR2_SHIFT;
	divf1 = (pll_cfg2 & SSCG_PLL_FEEDBACK_DIV_F1_MASK) >>
	SSCG_PLL_FEEDBACK_DIV_F1_SHIFT;
	divf2 = (pll_cfg2 & SSCG_PLL_FEEDBACK_DIV_F2_MASK) >>
	SSCG_PLL_FEEDBACK_DIV_F2_SHIFT;
	divq = (pll_cfg2 & SSCG_PLL_OUTPUT_DIV_VAL_MASK) >>
	SSCG_PLL_OUTPUT_DIV_VAL_SHIFT;
	sse = pll_cfg1 & SSCG_PLL_SSE_MASK;

	if (sse)
	sse = 8;
	else
	sse = 2;

	pllout = pll_refclk / (divr1 + 1) * sse * (divf1 + 1) /
	(divr2 + 1) * (divf2 + 1) / (divq + 1);

	return pllout / (pllout_div + 1) / div;
	}

	static u32 get_root_src_clk(enum clk_root_src root_src)
	{
	switch (root_src) {
	case OSC_25M_CLK:
	return 25000000;
	case OSC_27M_CLK:
	return 27000000;
	case OSC_32K_CLK:
	return 32768;
	case ARM_PLL_CLK:
	return decode_frac_pll(root_src);
	case SYSTEM_PLL1_800M_CLK:
	case SYSTEM_PLL1_400M_CLK:
	case SYSTEM_PLL1_266M_CLK:
	case SYSTEM_PLL1_200M_CLK:
	case SYSTEM_PLL1_160M_CLK:
	case SYSTEM_PLL1_133M_CLK:
	case SYSTEM_PLL1_100M_CLK:
	case SYSTEM_PLL1_80M_CLK:
	case SYSTEM_PLL1_40M_CLK:
	case SYSTEM_PLL2_1000M_CLK:
	case SYSTEM_PLL2_500M_CLK:
	case SYSTEM_PLL2_333M_CLK:
	case SYSTEM_PLL2_250M_CLK:
	case SYSTEM_PLL2_200M_CLK:
	case SYSTEM_PLL2_166M_CLK:
	case SYSTEM_PLL2_125M_CLK:
	case SYSTEM_PLL2_100M_CLK:
	case SYSTEM_PLL2_50M_CLK:
	case SYSTEM_PLL3_CLK:
	return decode_sscg_pll(root_src);
	case ARM_A53_ALT_CLK:
	return get_root_clk(ARM_A53_CLK_ROOT);
	default:
	return 0;
	}

	return 0;
	}

	static u32 get_root_clk(enum clk_root_index clock_id)
	{
	enum clk_root_src root_src;
	u32 post_podf, pre_podf, root_src_clk;

	if (clock_root_enabled(clock_id) <= 0)
	return 0;

	if (clock_get_prediv(clock_id, &pre_podf) < 0)
	return 0;

	if (clock_get_postdiv(clock_id, &post_podf) < 0)
	return 0;

	if (clock_get_src(clock_id, &root_src) < 0)
	return 0;

	root_src_clk = get_root_src_clk(root_src);

	return root_src_clk / (post_podf + 1) / (pre_podf + 1);
	}

	#ifdef CONFIG_MXC_OCOTP
	void enable_ocotp_clk(unsigned char enable)
	{
	clock_enable(CCGR_OCOTP, !!enable);
	}
	#endif

	int enable_i2c_clk(unsigned char enable, unsigned int i2c_num)
	{
	/* 0 - 3 is valid i2c num */
	if (i2c_num > 3)
	return -EINVAL;

	clock_enable(CCGR_I2C1 + i2c_num, !!enable);

	return 0;
	}

	u32 get_arm_core_clk(void)
	{
	enum clk_root_src root_src;
	u32 root_src_clk;

	if (clock_get_src(CORE_SEL_CFG, &root_src) < 0)
	return 0;

	root_src_clk = get_root_src_clk(root_src);

	return root_src_clk;
	}

	unsigned int mxc_get_clock(enum mxc_clock clk)
	{
	u32 val;

	switch (clk) {
	case MXC_ARM_CLK:
	return get_arm_core_clk();
	case MXC_IPG_CLK:
	clock_get_target_val(IPG_CLK_ROOT, &val);
	val = val & 0x3;
	return get_root_clk(AHB_CLK_ROOT) / (val + 1);
	case MXC_ESDHC_CLK:
	return get_root_clk(USDHC1_CLK_ROOT);
	case MXC_ESDHC2_CLK:
	return get_root_clk(USDHC2_CLK_ROOT);
	default:
	return get_root_clk(clk);
	}
	}

	u32 imx_get_uartclk(void)
	{
	return mxc_get_clock(UART1_CLK_ROOT);
	}

	void mxs_set_lcdclk(u32 base_addr, u32 freq)
	{
	/*
	* LCDIF_PIXEL_CLK: select 800MHz root clock,
	* select pre divider 8, output is 100 MHz
	*/
	clock_set_target_val(LCDIF_PIXEL_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(4) \|
	CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV8));
	}

	void init_wdog_clk(void)
	{
	clock_enable(CCGR_WDOG1, 0);
	clock_enable(CCGR_WDOG2, 0);
	clock_enable(CCGR_WDOG3, 0);
	clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(0));
	clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(0));
	clock_set_target_val(WDOG_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(0));
	clock_enable(CCGR_WDOG1, 1);
	clock_enable(CCGR_WDOG2, 1);
	clock_enable(CCGR_WDOG3, 1);
	}


	void init_nand_clk(void)
	{
	clock_enable(CCGR_RAWNAND, 0);
	clock_set_target_val(NAND_CLK_ROOT,
	CLK_ROOT_ON \| CLK_ROOT_SOURCE_SEL(3) \|
	CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4));
	clock_enable(CCGR_RAWNAND, 1);
	}

	void init_uart_clk(u32 index)
	{
	/* Set uart clock root 25M OSC */
	switch (index) {
	case 0:
	clock_enable(CCGR_UART1, 0);
	clock_set_target_val(UART1_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(0));
	clock_enable(CCGR_UART1, 1);
	return;
	case 1:
	clock_enable(CCGR_UART2, 0);
	clock_set_target_val(UART2_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(0));
	clock_enable(CCGR_UART2, 1);
	return;
	case 2:
	clock_enable(CCGR_UART3, 0);
	clock_set_target_val(UART3_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(0));
	clock_enable(CCGR_UART3, 1);
	return;
	case 3:
	clock_enable(CCGR_UART4, 0);
	clock_set_target_val(UART4_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(0));
	clock_enable(CCGR_UART4, 1);
	return;
	default:
	printf("Invalid uart index\n");
	return;
	}
	}

	void init_clk_usdhc(u32 index)
	{
	/*
	* set usdhc clock root
	* sys pll1 400M
	*/
	switch (index) {
	case 0:
	clock_enable(CCGR_USDHC1, 0);
	clock_set_target_val(USDHC1_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(1));
	clock_enable(CCGR_USDHC1, 1);
	return;
	case 1:
	clock_enable(CCGR_USDHC2, 0);
	clock_set_target_val(USDHC2_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(1));
	clock_enable(CCGR_USDHC2, 1);
	return;
	default:
	printf("Invalid usdhc index\n");
	return;
	}
	}

	int set_clk_qspi(void)
	{
	/*
	* set qspi root
	* sys pll1 100M
	*/
	clock_enable(CCGR_QSPI, 0);
	clock_set_target_val(QSPI_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(7));
	clock_enable(CCGR_QSPI, 1);

	return 0;
	}

	#ifdef CONFIG_FEC_MXC
	int set_clk_enet(enum enet_freq type)
	{
	u32 target;
	u32 enet1_ref;

	switch (type) {
	case ENET_125MHZ:
	enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
	break;
	case ENET_50MHZ:
	enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
	break;
	case ENET_25MHZ:
	enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
	break;
	default:
	return -EINVAL;
	}

	/* disable the clock first */
	clock_enable(CCGR_ENET1, 0);
	clock_enable(CCGR_SIM_ENET, 0);

	/* set enet axi clock 266Mhz */
	target = CLK_ROOT_ON \| ENET_AXI_CLK_ROOT_FROM_SYS1_PLL_266M \|
	CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) \|
	CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
	clock_set_target_val(ENET_AXI_CLK_ROOT, target);

	target = CLK_ROOT_ON \| enet1_ref \|
	CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) \|
	CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
	clock_set_target_val(ENET_REF_CLK_ROOT, target);

	target = CLK_ROOT_ON \|
	ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK \|
	CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) \|
	CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
	clock_set_target_val(ENET_TIMER_CLK_ROOT, target);

	/* enable clock */
	clock_enable(CCGR_SIM_ENET, 1);
	clock_enable(CCGR_ENET1, 1);

	return 0;
	}
	#endif

	u32 imx_get_fecclk(void)
	{
	return get_root_clk(ENET_AXI_CLK_ROOT);
	}

	static struct dram_bypass_clk_setting imx8mq_dram_bypass_tbl[] = {
	DRAM_BYPASS_ROOT_CONFIG(MHZ(100), 2, CLK_ROOT_PRE_DIV1, 2,
	CLK_ROOT_PRE_DIV2),
	DRAM_BYPASS_ROOT_CONFIG(MHZ(250), 3, CLK_ROOT_PRE_DIV2, 2,
	CLK_ROOT_PRE_DIV2),
	DRAM_BYPASS_ROOT_CONFIG(MHZ(400), 1, CLK_ROOT_PRE_DIV2, 3,
	CLK_ROOT_PRE_DIV2),
	};

	void dram_enable_bypass(ulong clk_val)
	{
	int i;
	struct dram_bypass_clk_setting *config;

	for (i = 0; i < ARRAY_SIZE(imx8mq_dram_bypass_tbl); i++) {
	if (clk_val == imx8mq_dram_bypass_tbl[i].clk)
	break;
	}

	if (i == ARRAY_SIZE(imx8mq_dram_bypass_tbl)) {
	printf("No matched freq table %lu\n", clk_val);
	return;
	}

	config = &imx8mq_dram_bypass_tbl[i];

	clock_set_target_val(DRAM_ALT_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(config->alt_root_sel) \|
	CLK_ROOT_PRE_DIV(config->alt_pre_div));
	clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(config->apb_root_sel) \|
	CLK_ROOT_PRE_DIV(config->apb_pre_div));
	clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(1));
	}

	void dram_disable_bypass(void)
	{
	clock_set_target_val(DRAM_SEL_CFG, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(0));
	clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(4) \|
	CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5));
	}

	#ifdef CONFIG_SPL_BUILD
	void dram_pll_init(ulong pll_val)
	{
	u32 val;
	void __iomem *pll_control_reg = &ana_pll->dram_pll_cfg0;
	void __iomem *pll_cfg_reg2 = &ana_pll->dram_pll_cfg2;

	/* Bypass */
	setbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK);
	setbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK);

	switch (pll_val) {
	case MHZ(800):
	val = readl(pll_cfg_reg2);
	val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK \|
	SSCG_PLL_FEEDBACK_DIV_F2_MASK \|
	SSCG_PLL_FEEDBACK_DIV_F1_MASK \|
	SSCG_PLL_REF_DIVR2_MASK);
	val \|= SSCG_PLL_OUTPUT_DIV_VAL(0);
	val \|= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11);
	val \|= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
	val \|= SSCG_PLL_REF_DIVR2_VAL(29);
	writel(val, pll_cfg_reg2);
	break;
	case MHZ(600):
	val = readl(pll_cfg_reg2);
	val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK \|
	SSCG_PLL_FEEDBACK_DIV_F2_MASK \|
	SSCG_PLL_FEEDBACK_DIV_F1_MASK \|
	SSCG_PLL_REF_DIVR2_MASK);
	val \|= SSCG_PLL_OUTPUT_DIV_VAL(1);
	val \|= SSCG_PLL_FEEDBACK_DIV_F2_VAL(17);
	val \|= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
	val \|= SSCG_PLL_REF_DIVR2_VAL(29);
	writel(val, pll_cfg_reg2);
	break;
	case MHZ(400):
	val = readl(pll_cfg_reg2);
	val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK \|
	SSCG_PLL_FEEDBACK_DIV_F2_MASK \|
	SSCG_PLL_FEEDBACK_DIV_F1_MASK \|
	SSCG_PLL_REF_DIVR2_MASK);
	val \|= SSCG_PLL_OUTPUT_DIV_VAL(1);
	val \|= SSCG_PLL_FEEDBACK_DIV_F2_VAL(11);
	val \|= SSCG_PLL_FEEDBACK_DIV_F1_VAL(39);
	val \|= SSCG_PLL_REF_DIVR2_VAL(29);
	writel(val, pll_cfg_reg2);
	break;
	case MHZ(167):
	val = readl(pll_cfg_reg2);
	val &= ~(SSCG_PLL_OUTPUT_DIV_VAL_MASK \|
	SSCG_PLL_FEEDBACK_DIV_F2_MASK \|
	SSCG_PLL_FEEDBACK_DIV_F1_MASK \|
	SSCG_PLL_REF_DIVR2_MASK);
	val \|= SSCG_PLL_OUTPUT_DIV_VAL(3);
	val \|= SSCG_PLL_FEEDBACK_DIV_F2_VAL(8);
	val \|= SSCG_PLL_FEEDBACK_DIV_F1_VAL(45);
	val \|= SSCG_PLL_REF_DIVR2_VAL(30);
	writel(val, pll_cfg_reg2);
	break;
	default:
	break;
	}

	/* Clear power down bit */
	clrbits_le32(pll_control_reg, SSCG_PLL_PD_MASK);
	/* Eanble ARM_PLL/SYS_PLL */
	setbits_le32(pll_control_reg, SSCG_PLL_DRAM_PLL_CLKE_MASK);

	/* Clear bypass */
	clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS1_MASK);
	__udelay(100);
	clrbits_le32(pll_control_reg, SSCG_PLL_BYPASS2_MASK);
	/* Wait lock */
	while (!(readl(pll_control_reg) & SSCG_PLL_LOCK_MASK))
	;
	}

	static int frac_pll_init(u32 pll, enum frac_pll_out_val val)
	{
	void __iomem pll_cfg0, __iomem pll_cfg1;
	u32 val_cfg0, val_cfg1, divq;
	int ret;

	switch (pll) {
	case ANATOP_ARM_PLL:
	pll_cfg0 = &ana_pll->arm_pll_cfg0;
	pll_cfg1 = &ana_pll->arm_pll_cfg1;

	if (val == FRAC_PLL_OUT_1000M) {
	val_cfg1 = FRAC_PLL_INT_DIV_CTL_VAL(49);
	divq = 0;
	} else {
	val_cfg1 = FRAC_PLL_INT_DIV_CTL_VAL(79);
	divq = 1;
	}
	val_cfg0 = FRAC_PLL_CLKE_MASK \| FRAC_PLL_REFCLK_SEL_OSC_25M \|
	FRAC_PLL_LOCK_SEL_MASK \| FRAC_PLL_NEWDIV_VAL_MASK \|
	FRAC_PLL_REFCLK_DIV_VAL(4) \|
	FRAC_PLL_OUTPUT_DIV_VAL(divq);
	break;
	default:
	return -EINVAL;
	}

	/* bypass the clock */
	setbits_le32(pll_cfg0, FRAC_PLL_BYPASS_MASK);
	/* Set the value */
	writel(val_cfg1, pll_cfg1);
	writel(val_cfg0 \| FRAC_PLL_BYPASS_MASK, pll_cfg0);
	val_cfg0 = readl(pll_cfg0);
	/* unbypass the clock */
	clrbits_le32(pll_cfg0, FRAC_PLL_BYPASS_MASK);
	ret = readl_poll_timeout(pll_cfg0, val_cfg0,
	val_cfg0 & FRAC_PLL_LOCK_MASK, 1);
	if (ret)
	printf("%s timeout\n", __func__);
	clrbits_le32(pll_cfg0, FRAC_PLL_NEWDIV_VAL_MASK);

	return 0;
	}


	int clock_init(void)
	{
	u32 grade;

	clock_set_target_val(ARM_A53_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(0));

	/*
	* 8MQ only supports two grades: consumer and industrial.
	* We set ARM clock to 1Ghz for consumer, 800Mhz for industrial
	*/
	grade = get_cpu_temp_grade(NULL, NULL);
	if (!grade)
	frac_pll_init(ANATOP_ARM_PLL, FRAC_PLL_OUT_1000M);
	else
	frac_pll_init(ANATOP_ARM_PLL, FRAC_PLL_OUT_800M);

	/* Bypass CCM A53 ROOT, Switch to ARM PLL -> MUX-> CPU */
	clock_set_target_val(CORE_SEL_CFG, CLK_ROOT_SOURCE_SEL(1));

	/*
	* According to ANAMIX SPEC
	* sys pll1 fixed at 800MHz
	* sys pll2 fixed at 1GHz
	* Here we only enable the outputs.
	*/
	setbits_le32(&ana_pll->sys_pll1_cfg0, SSCG_PLL_CLKE_MASK \|
	SSCG_PLL_DIV2_CLKE_MASK \| SSCG_PLL_DIV3_CLKE_MASK \|
	SSCG_PLL_DIV4_CLKE_MASK \| SSCG_PLL_DIV5_CLKE_MASK \|
	SSCG_PLL_DIV6_CLKE_MASK \| SSCG_PLL_DIV8_CLKE_MASK \|
	SSCG_PLL_DIV10_CLKE_MASK \| SSCG_PLL_DIV20_CLKE_MASK);

	setbits_le32(&ana_pll->sys_pll2_cfg0, SSCG_PLL_CLKE_MASK \|
	SSCG_PLL_DIV2_CLKE_MASK \| SSCG_PLL_DIV3_CLKE_MASK \|
	SSCG_PLL_DIV4_CLKE_MASK \| SSCG_PLL_DIV5_CLKE_MASK \|
	SSCG_PLL_DIV6_CLKE_MASK \| SSCG_PLL_DIV8_CLKE_MASK \|
	SSCG_PLL_DIV10_CLKE_MASK \| SSCG_PLL_DIV20_CLKE_MASK);

	clock_set_target_val(NAND_USDHC_BUS_CLK_ROOT, CLK_ROOT_ON \|
	CLK_ROOT_SOURCE_SEL(1));

	init_wdog_clk();
	clock_enable(CCGR_TSENSOR, 1);
	clock_enable(CCGR_OCOTP, 1);

	/* config GIC ROOT to sys_pll2_200m */
	clock_enable(CCGR_GIC, 0);
	clock_set_target_val(GIC_CLK_ROOT,
	CLK_ROOT_ON \| CLK_ROOT_SOURCE_SEL(1));
	clock_enable(CCGR_GIC, 1);

	return 0;
	}
	#endif

	/*
	* Dump some clockes.
	*/
	#ifndef CONFIG_SPL_BUILD
	static int do_imx8m_showclocks(cmd_tbl_t *cmdtp, int flag, int argc,
	char * const argv[])
	{
	u32 freq;

	freq = decode_frac_pll(ARM_PLL_CLK);
	printf("ARM_PLL %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(DRAM_PLL1_CLK);
	printf("DRAM_PLL %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL1_800M_CLK);
	printf("SYS_PLL1_800 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL1_400M_CLK);
	printf("SYS_PLL1_400 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL1_266M_CLK);
	printf("SYS_PLL1_266 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL1_200M_CLK);
	printf("SYS_PLL1_200 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL1_160M_CLK);
	printf("SYS_PLL1_160 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL1_133M_CLK);
	printf("SYS_PLL1_133 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL1_100M_CLK);
	printf("SYS_PLL1_100 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL1_80M_CLK);
	printf("SYS_PLL1_80 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL1_40M_CLK);
	printf("SYS_PLL1_40 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL2_1000M_CLK);
	printf("SYS_PLL2_1000 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL2_500M_CLK);
	printf("SYS_PLL2_500 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL2_333M_CLK);
	printf("SYS_PLL2_333 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL2_250M_CLK);
	printf("SYS_PLL2_250 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL2_200M_CLK);
	printf("SYS_PLL2_200 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL2_166M_CLK);
	printf("SYS_PLL2_166 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL2_125M_CLK);
	printf("SYS_PLL2_125 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL2_100M_CLK);
	printf("SYS_PLL2_100 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL2_50M_CLK);
	printf("SYS_PLL2_50 %8d MHz\n", freq / 1000000);
	freq = decode_sscg_pll(SYSTEM_PLL3_CLK);
	printf("SYS_PLL3 %8d MHz\n", freq / 1000000);
	freq = mxc_get_clock(UART1_CLK_ROOT);
	printf("UART1 %8d MHz\n", freq / 1000000);
	freq = mxc_get_clock(USDHC1_CLK_ROOT);
	printf("USDHC1 %8d MHz\n", freq / 1000000);
	freq = mxc_get_clock(QSPI_CLK_ROOT);
	printf("QSPI %8d MHz\n", freq / 1000000);
	return 0;
	}

	U_BOOT_CMD(
	clocks, CONFIG_SYS_MAXARGS, 1, do_imx8m_showclocks,
	"display clocks",
	""
	);
	#endif