| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2024 Intel Corporation <www.intel.com> |
| */ |
| |
| #include <clk-uclass.h> |
| #include <config.h> |
| #include <errno.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <stdarg.h> |
| #include <stdio.h> |
| #include <time.h> |
| #include <vsprintf.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <asm/system.h> |
| #include <asm/u-boot.h> |
| #include <dm/lists.h> |
| #include <dm/util.h> |
| #include <linux/bitops.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <asm/arch/clock_manager.h> |
| #include <dt-bindings/clock/agilex5-clock.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct socfpga_clk_plat { |
| void __iomem *regs; |
| }; |
| |
| /* |
| * function to write the bypass register which requires a poll of the |
| * busy bit |
| */ |
| static void clk_write_bypass_mainpll(struct socfpga_clk_plat *plat, u32 val) |
| { |
| CM_REG_WRITEL(plat, val, CLKMGR_MAINPLL_BYPASS); |
| cm_wait_for_fsm(); |
| } |
| |
| static void clk_write_bypass_perpll(struct socfpga_clk_plat *plat, u32 val) |
| { |
| CM_REG_WRITEL(plat, val, CLKMGR_PERPLL_BYPASS); |
| cm_wait_for_fsm(); |
| } |
| |
| /* function to write the ctrl register which requires a poll of the busy bit */ |
| static void clk_write_ctrl(struct socfpga_clk_plat *plat, u32 val) |
| { |
| CM_REG_WRITEL(plat, val, CLKMGR_CTRL); |
| cm_wait_for_fsm(); |
| } |
| |
| static const struct { |
| u32 reg; |
| u32 val; |
| u32 mask; |
| } membus_pll[] = { |
| { |
| MEMBUS_CLKSLICE_REG, |
| /* |
| * BIT[7:7] |
| * Enable source synchronous mode |
| */ |
| BIT(7), |
| BIT(7) |
| }, |
| { |
| MEMBUS_SYNTHCALFOSC_INIT_CENTERFREQ_REG, |
| /* |
| * BIT[0:0] |
| * Sets synthcalfosc_init_centerfreq=1 to limit overshoot |
| * frequency during lock |
| */ |
| BIT(0), |
| BIT(0) |
| }, |
| { |
| MEMBUS_SYNTHPPM_WATCHDOGTMR_VF01_REG, |
| /* |
| * BIT[0:0] |
| * Sets synthppm_watchdogtmr_vf0=1 to give the pll more time |
| * to settle before lock is asserted. |
| */ |
| BIT(0), |
| BIT(0) |
| }, |
| { |
| MEMBUS_CALCLKSLICE0_DUTY_LOCOVR_REG, |
| /* |
| * BIT[6:0] |
| * Centering duty cycle for clkslice0 output |
| */ |
| 0x4a, |
| GENMASK(6, 0) |
| }, |
| { |
| MEMBUS_CALCLKSLICE1_DUTY_LOCOVR_REG, |
| /* |
| * BIT[6:0] |
| * Centering duty cycle for clkslice1 output |
| */ |
| 0x4a, |
| GENMASK(6, 0) |
| }, |
| }; |
| |
| static int membus_wait_for_req(struct socfpga_clk_plat *plat, u32 pll, |
| int timeout) |
| { |
| int cnt = 0; |
| u32 req_status; |
| |
| if (pll == MEMBUS_MAINPLL) |
| req_status = CM_REG_READL(plat, CLKMGR_MAINPLL_MEM); |
| else |
| req_status = CM_REG_READL(plat, CLKMGR_PERPLL_MEM); |
| |
| while ((cnt < timeout) && (req_status & CLKMGR_MEM_REQ_SET_MSK)) { |
| if (pll == MEMBUS_MAINPLL) |
| req_status = CM_REG_READL(plat, CLKMGR_MAINPLL_MEM); |
| else |
| req_status = CM_REG_READL(plat, CLKMGR_PERPLL_MEM); |
| cnt++; |
| } |
| |
| if (cnt >= timeout) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static int membus_write_pll(struct socfpga_clk_plat *plat, u32 pll, |
| u32 addr_offset, u32 wdat, int timeout) |
| { |
| u32 addr; |
| u32 val; |
| |
| addr = ((addr_offset | CLKMGR_MEM_ADDR_START) & CLKMGR_MEM_ADDR_MASK); |
| |
| val = (CLKMGR_MEM_REQ_SET_MSK | CLKMGR_MEM_WR_SET_MSK | |
| (wdat << CLKMGR_MEM_WDAT_LSB_OFFSET) | addr); |
| |
| if (pll == MEMBUS_MAINPLL) |
| CM_REG_WRITEL(plat, val, CLKMGR_MAINPLL_MEM); |
| else |
| CM_REG_WRITEL(plat, val, CLKMGR_PERPLL_MEM); |
| |
| debug("MEMBUS: Write 0x%08x to addr = 0x%08x\n", wdat, addr); |
| |
| return membus_wait_for_req(plat, pll, timeout); |
| } |
| |
| static int membus_read_pll(struct socfpga_clk_plat *plat, u32 pll, |
| u32 addr_offset, u32 *rdata, int timeout) |
| { |
| u32 addr; |
| u32 val; |
| |
| addr = ((addr_offset | CLKMGR_MEM_ADDR_START) & CLKMGR_MEM_ADDR_MASK); |
| |
| val = ((CLKMGR_MEM_REQ_SET_MSK & ~CLKMGR_MEM_WR_SET_MSK) | addr); |
| |
| if (pll == MEMBUS_MAINPLL) |
| CM_REG_WRITEL(plat, val, CLKMGR_MAINPLL_MEM); |
| else |
| CM_REG_WRITEL(plat, val, CLKMGR_PERPLL_MEM); |
| |
| *rdata = 0; |
| |
| if (membus_wait_for_req(plat, pll, timeout)) |
| return -ETIMEDOUT; |
| |
| if (pll == MEMBUS_MAINPLL) |
| *rdata = CM_REG_READL(plat, CLKMGR_MAINPLL_MEMSTAT); |
| else |
| *rdata = CM_REG_READL(plat, CLKMGR_PERPLL_MEMSTAT); |
| |
| debug("MEMBUS: Read 0x%08x from addr = 0x%08x\n", *rdata, addr); |
| |
| return 0; |
| } |
| |
| static void membus_pll_configs(struct socfpga_clk_plat *plat, u32 pll) |
| { |
| int i; |
| u32 rdata; |
| |
| for (i = 0; i < ARRAY_SIZE(membus_pll); i++) { |
| membus_read_pll(plat, pll, membus_pll[i].reg, |
| &rdata, MEMBUS_TIMEOUT); |
| membus_write_pll(plat, pll, membus_pll[i].reg, |
| ((rdata & ~membus_pll[i].mask) | |
| membus_pll[i].val), |
| MEMBUS_TIMEOUT); |
| } |
| } |
| |
| static u32 calc_vocalib_pll(u32 pllm, u32 pllglob) |
| { |
| u32 mdiv, refclkdiv, arefclkdiv, drefclkdiv, mscnt, hscnt, vcocalib; |
| |
| mdiv = pllm & CLKMGR_PLLM_MDIV_MASK; |
| arefclkdiv = (pllglob & CLKMGR_PLLGLOB_AREFCLKDIV_MASK) >> |
| CLKMGR_PLLGLOB_AREFCLKDIV_OFFSET; |
| drefclkdiv = (pllglob & CLKMGR_PLLGLOB_DREFCLKDIV_MASK) >> |
| CLKMGR_PLLGLOB_DREFCLKDIV_OFFSET; |
| refclkdiv = (pllglob & CLKMGR_PLLGLOB_REFCLKDIV_MASK) >> |
| CLKMGR_PLLGLOB_REFCLKDIV_OFFSET; |
| mscnt = CLKMGR_VCOCALIB_MSCNT_CONST / (mdiv * BIT(drefclkdiv)); |
| if (!mscnt) |
| mscnt = 1; |
| hscnt = (mdiv * mscnt * BIT(drefclkdiv) / refclkdiv) - |
| CLKMGR_VCOCALIB_HSCNT_CONST; |
| vcocalib = (hscnt & CLKMGR_VCOCALIB_HSCNT_MASK) | |
| ((mscnt << CLKMGR_VCOCALIB_MSCNT_OFFSET) & |
| CLKMGR_VCOCALIB_MSCNT_MASK); |
| |
| /* Dump all the pll calibration settings for debug purposes */ |
| debug("mdiv : %d\n", mdiv); |
| debug("arefclkdiv : %d\n", arefclkdiv); |
| debug("drefclkdiv : %d\n", drefclkdiv); |
| debug("refclkdiv : %d\n", refclkdiv); |
| debug("mscnt : %d\n", mscnt); |
| debug("hscnt : %d\n", hscnt); |
| debug("vcocalib : 0x%08x\n", vcocalib); |
| |
| return vcocalib; |
| } |
| |
| /* |
| * Setup clocks while making no assumptions about previous state of the clocks. |
| */ |
| static void clk_basic_init(struct udevice *dev, |
| const struct cm_config * const cfg) |
| { |
| struct socfpga_clk_plat *plat = dev_get_plat(dev); |
| u32 vcocalib; |
| |
| if (!cfg) |
| return; |
| |
| if (IS_ENABLED(CONFIG_TARGET_SOCFPGA_AGILEX5_EMU)) { |
| /* Take both PLL out of reset and power up */ |
| CM_REG_SETBITS(plat, CLKMGR_MAINPLL_PLLGLOB, |
| CLKMGR_PLLGLOB_PD_MASK | CLKMGR_PLLGLOB_RST_MASK); |
| CM_REG_SETBITS(plat, CLKMGR_PERPLL_PLLGLOB, |
| CLKMGR_PLLGLOB_PD_MASK | CLKMGR_PLLGLOB_RST_MASK); |
| |
| cm_wait_for_lock(CLKMGR_STAT_ALLPLL_LOCKED_MASK); |
| |
| /* Put both PLLs in bypass */ |
| clk_write_bypass_mainpll(plat, CLKMGR_BYPASS_MAINPLL_ALL); |
| clk_write_bypass_perpll(plat, CLKMGR_BYPASS_PERPLL_ALL); |
| |
| /* Take all PLLs out of bypass */ |
| clk_write_bypass_mainpll(plat, 0); |
| clk_write_bypass_perpll(plat, 0); |
| |
| /* Out of boot mode */ |
| clk_write_ctrl(plat, |
| CM_REG_READL(plat, CLKMGR_CTRL) & ~CLKMGR_CTRL_BOOTMODE); |
| } else { |
| #ifdef CONFIG_SPL_BUILD |
| /* Always force clock manager into boot mode before any configuration */ |
| clk_write_ctrl(plat, |
| CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE); |
| #else |
| /* Skip clock configuration in SSBL if it's not in boot mode */ |
| if (!(CM_REG_READL(plat, CLKMGR_CTRL) & CLKMGR_CTRL_BOOTMODE)) |
| return; |
| #endif |
| |
| /* Put both PLLs in bypass */ |
| clk_write_bypass_mainpll(plat, CLKMGR_BYPASS_MAINPLL_ALL); |
| clk_write_bypass_perpll(plat, CLKMGR_BYPASS_PERPLL_ALL); |
| |
| /* Put both PLLs in Reset and Power Down */ |
| CM_REG_CLRBITS(plat, CLKMGR_MAINPLL_PLLGLOB, |
| CLKMGR_PLLGLOB_PD_MASK | CLKMGR_PLLGLOB_RST_MASK); |
| CM_REG_CLRBITS(plat, CLKMGR_PERPLL_PLLGLOB, |
| CLKMGR_PLLGLOB_PD_MASK | CLKMGR_PLLGLOB_RST_MASK); |
| |
| /* setup main PLL dividers where calculate the vcocalib value */ |
| vcocalib = calc_vocalib_pll(cfg->main_pll_pllm, cfg->main_pll_pllglob); |
| CM_REG_WRITEL(plat, cfg->main_pll_pllglob & ~CLKMGR_PLLGLOB_RST_MASK, |
| CLKMGR_MAINPLL_PLLGLOB); |
| CM_REG_WRITEL(plat, cfg->main_pll_fdbck, CLKMGR_MAINPLL_FDBCK); |
| CM_REG_WRITEL(plat, vcocalib, CLKMGR_MAINPLL_VCOCALIB); |
| CM_REG_WRITEL(plat, cfg->main_pll_pllc0, CLKMGR_MAINPLL_PLLC0); |
| CM_REG_WRITEL(plat, cfg->main_pll_pllc1, CLKMGR_MAINPLL_PLLC1); |
| CM_REG_WRITEL(plat, cfg->main_pll_pllc2, CLKMGR_MAINPLL_PLLC2); |
| CM_REG_WRITEL(plat, cfg->main_pll_pllc3, CLKMGR_MAINPLL_PLLC3); |
| CM_REG_WRITEL(plat, cfg->main_pll_pllm, CLKMGR_MAINPLL_PLLM); |
| CM_REG_WRITEL(plat, cfg->main_pll_nocclk, CLKMGR_MAINPLL_NOCCLK); |
| CM_REG_WRITEL(plat, cfg->main_pll_nocdiv, CLKMGR_MAINPLL_NOCDIV); |
| |
| /* setup peripheral PLL dividers where calculate the vcocalib value */ |
| vcocalib = calc_vocalib_pll(cfg->per_pll_pllm, cfg->per_pll_pllglob); |
| CM_REG_WRITEL(plat, cfg->per_pll_pllglob & ~CLKMGR_PLLGLOB_RST_MASK, |
| CLKMGR_PERPLL_PLLGLOB); |
| CM_REG_WRITEL(plat, cfg->per_pll_fdbck, CLKMGR_PERPLL_FDBCK); |
| CM_REG_WRITEL(plat, vcocalib, CLKMGR_PERPLL_VCOCALIB); |
| CM_REG_WRITEL(plat, cfg->per_pll_pllc0, CLKMGR_PERPLL_PLLC0); |
| CM_REG_WRITEL(plat, cfg->per_pll_pllc1, CLKMGR_PERPLL_PLLC1); |
| CM_REG_WRITEL(plat, cfg->per_pll_pllc2, CLKMGR_PERPLL_PLLC2); |
| CM_REG_WRITEL(plat, cfg->per_pll_pllc3, CLKMGR_PERPLL_PLLC3); |
| CM_REG_WRITEL(plat, cfg->per_pll_pllm, CLKMGR_PERPLL_PLLM); |
| CM_REG_WRITEL(plat, cfg->per_pll_emacctl, CLKMGR_PERPLL_EMACCTL); |
| CM_REG_WRITEL(plat, cfg->per_pll_gpiodiv, CLKMGR_PERPLL_GPIODIV); |
| |
| /* Configure ping pong counters in control group */ |
| CM_REG_WRITEL(plat, cfg->ctl_emacactr, CLKMGR_CTL_EMACACTR); |
| CM_REG_WRITEL(plat, cfg->ctl_emacbctr, CLKMGR_CTL_EMACBCTR); |
| CM_REG_WRITEL(plat, cfg->ctl_emacptpctr, CLKMGR_CTL_EMACPTPCTR); |
| CM_REG_WRITEL(plat, cfg->ctl_gpiodbctr, CLKMGR_CTL_GPIODBCTR); |
| CM_REG_WRITEL(plat, cfg->ctl_s2fuser0ctr, CLKMGR_CTL_S2FUSER0CTR); |
| CM_REG_WRITEL(plat, cfg->ctl_s2fuser1ctr, CLKMGR_CTL_S2FUSER1CTR); |
| CM_REG_WRITEL(plat, cfg->ctl_psirefctr, CLKMGR_CTL_PSIREFCTR); |
| CM_REG_WRITEL(plat, cfg->ctl_usb31ctr, CLKMGR_CTL_USB31CTR); |
| CM_REG_WRITEL(plat, cfg->ctl_dsuctr, CLKMGR_CTL_DSUCTR); |
| CM_REG_WRITEL(plat, cfg->ctl_core01ctr, CLKMGR_CTL_CORE01CTR); |
| CM_REG_WRITEL(plat, cfg->ctl_core23ctr, CLKMGR_CTL_CORE23CTR); |
| CM_REG_WRITEL(plat, cfg->ctl_core2ctr, CLKMGR_CTL_CORE2CTR); |
| CM_REG_WRITEL(plat, cfg->ctl_core3ctr, CLKMGR_CTL_CORE3CTR); |
| |
| /* Take both PLL out of reset and power up */ |
| CM_REG_SETBITS(plat, CLKMGR_MAINPLL_PLLGLOB, |
| CLKMGR_PLLGLOB_PD_MASK | CLKMGR_PLLGLOB_RST_MASK); |
| CM_REG_SETBITS(plat, CLKMGR_PERPLL_PLLGLOB, |
| CLKMGR_PLLGLOB_PD_MASK | CLKMGR_PLLGLOB_RST_MASK); |
| |
| /* Membus programming for mainpll */ |
| membus_pll_configs(plat, MEMBUS_MAINPLL); |
| /* Membus programming for peripll */ |
| membus_pll_configs(plat, MEMBUS_PERPLL); |
| |
| /* Enable Main pll clkslices */ |
| CM_REG_WRITEL(plat, CM_REG_READL(plat, CLKMGR_MAINPLL_PLLC0) | |
| CLKMGR_PLLCX_EN_SET_MSK, |
| CLKMGR_MAINPLL_PLLC0); |
| CM_REG_WRITEL(plat, CM_REG_READL(plat, CLKMGR_MAINPLL_PLLC1) | |
| CLKMGR_PLLCX_EN_SET_MSK, |
| CLKMGR_MAINPLL_PLLC1); |
| CM_REG_WRITEL(plat, CM_REG_READL(plat, CLKMGR_MAINPLL_PLLC2) | |
| CLKMGR_PLLCX_EN_SET_MSK, |
| CLKMGR_MAINPLL_PLLC2); |
| CM_REG_WRITEL(plat, CM_REG_READL(plat, CLKMGR_MAINPLL_PLLC3) | |
| CLKMGR_PLLCX_EN_SET_MSK, |
| CLKMGR_MAINPLL_PLLC3); |
| |
| /* Enable Periph pll clkslices */ |
| CM_REG_WRITEL(plat, CM_REG_READL(plat, CLKMGR_PERPLL_PLLC0) | |
| CLKMGR_PLLCX_EN_SET_MSK, |
| CLKMGR_PERPLL_PLLC0); |
| CM_REG_WRITEL(plat, CM_REG_READL(plat, CLKMGR_PERPLL_PLLC1) | |
| CLKMGR_PLLCX_EN_SET_MSK, |
| CLKMGR_PERPLL_PLLC1); |
| CM_REG_WRITEL(plat, CM_REG_READL(plat, CLKMGR_PERPLL_PLLC2) | |
| CLKMGR_PLLCX_EN_SET_MSK, |
| CLKMGR_PERPLL_PLLC2); |
| CM_REG_WRITEL(plat, CM_REG_READL(plat, CLKMGR_PERPLL_PLLC3) | |
| CLKMGR_PLLCX_EN_SET_MSK, |
| CLKMGR_PERPLL_PLLC3); |
| |
| cm_wait_for_lock(CLKMGR_STAT_ALLPLL_LOCKED_MASK); |
| |
| CM_REG_WRITEL(plat, CLKMGR_LOSTLOCK_SET_MASK, CLKMGR_MAINPLL_LOSTLOCK); |
| CM_REG_WRITEL(plat, CLKMGR_LOSTLOCK_SET_MASK, CLKMGR_PERPLL_LOSTLOCK); |
| |
| CM_REG_WRITEL(plat, CM_REG_READL(plat, CLKMGR_MAINPLL_PLLGLOB) | |
| CLKMGR_PLLGLOB_CLR_LOSTLOCK_BYPASS_MASK, |
| CLKMGR_MAINPLL_PLLGLOB); |
| CM_REG_WRITEL(plat, CM_REG_READL(plat, CLKMGR_PERPLL_PLLGLOB) | |
| CLKMGR_PLLGLOB_CLR_LOSTLOCK_BYPASS_MASK, |
| CLKMGR_PERPLL_PLLGLOB); |
| |
| /* Take all PLLs out of bypass */ |
| clk_write_bypass_mainpll(plat, 0); |
| clk_write_bypass_perpll(plat, 0); |
| |
| /* Clear the loss of lock bits (write 1 to clear) */ |
| CM_REG_CLRBITS(plat, CLKMGR_INTRCLR, |
| CLKMGR_INTER_PERPLLLOST_MASK | |
| CLKMGR_INTER_MAINPLLLOST_MASK); |
| |
| /* Take all ping pong counters out of reset */ |
| CM_REG_CLRBITS(plat, CLKMGR_CTL_EXTCNTRST, |
| CLKMGR_CTL_EXTCNTRST_ALLCNTRST); |
| |
| #ifdef COUNTER_FREQUENCY_REAL |
| u32 cntfrq = COUNTER_FREQUENCY_REAL; |
| u32 counter_freq = 0; |
| |
| /* Update with accurate clock frequency */ |
| if (current_el() == 3) { |
| asm volatile("msr cntfrq_el0, %0" : : "r" (cntfrq) : "memory"); |
| asm volatile("mrs %0, cntfrq_el0" : "=r" (counter_freq)); |
| debug("Counter freq = 0x%x\n", counter_freq); |
| } |
| #endif |
| |
| /* Out of boot mode */ |
| clk_write_ctrl(plat, |
| CM_REG_READL(plat, CLKMGR_CTRL) & ~CLKMGR_CTRL_BOOTMODE); |
| } |
| } |
| |
| static u64 clk_get_vco_clk_hz(struct socfpga_clk_plat *plat, |
| u32 pllglob_reg, u32 pllm_reg) |
| { |
| u64 fref, arefdiv, mdiv, reg, vco; |
| |
| reg = CM_REG_READL(plat, pllglob_reg); |
| |
| fref = (reg & CLKMGR_PLLGLOB_VCO_PSRC_MASK) >> |
| CLKMGR_PLLGLOB_VCO_PSRC_OFFSET; |
| |
| switch (fref) { |
| case CLKMGR_VCO_PSRC_EOSC1: |
| fref = cm_get_osc_clk_hz(); |
| break; |
| case CLKMGR_VCO_PSRC_INTOSC: |
| fref = cm_get_intosc_clk_hz(); |
| break; |
| case CLKMGR_VCO_PSRC_F2S: |
| fref = cm_get_fpga_clk_hz(); |
| break; |
| } |
| |
| arefdiv = (reg & CLKMGR_PLLGLOB_AREFCLKDIV_MASK) >> |
| CLKMGR_PLLGLOB_AREFCLKDIV_OFFSET; |
| |
| mdiv = CM_REG_READL(plat, pllm_reg) & CLKMGR_PLLM_MDIV_MASK; |
| |
| vco = fref / arefdiv; |
| vco = vco * mdiv; |
| |
| return vco; |
| } |
| |
| static u64 clk_get_main_vco_clk_hz(struct socfpga_clk_plat *plat) |
| { |
| return clk_get_vco_clk_hz(plat, CLKMGR_MAINPLL_PLLGLOB, |
| CLKMGR_MAINPLL_PLLM); |
| } |
| |
| static u64 clk_get_per_vco_clk_hz(struct socfpga_clk_plat *plat) |
| { |
| return clk_get_vco_clk_hz(plat, CLKMGR_PERPLL_PLLGLOB, |
| CLKMGR_PERPLL_PLLM); |
| } |
| |
| static u32 clk_get_5_1_clk_src(struct socfpga_clk_plat *plat, u64 reg) |
| { |
| u32 clksrc = CM_REG_READL(plat, reg); |
| |
| return (clksrc & CLKMGR_CLKSRC_MASK) >> CLKMGR_CLKSRC_OFFSET; |
| } |
| |
| static u64 clk_get_clksrc_hz(struct socfpga_clk_plat *plat, u32 clksrc_reg, |
| u32 main_reg, u32 per_reg) |
| { |
| u64 clock; |
| u32 clklsrc = clk_get_5_1_clk_src(plat, clksrc_reg); |
| |
| switch (clklsrc) { |
| case CLKMGR_CLKSRC_MAIN: |
| clock = clk_get_main_vco_clk_hz(plat); |
| clock /= (CM_REG_READL(plat, main_reg) & |
| CLKMGR_CLKCNT_MSK); |
| break; |
| |
| case CLKMGR_CLKSRC_PER: |
| clock = clk_get_per_vco_clk_hz(plat); |
| clock /= (CM_REG_READL(plat, per_reg) & |
| CLKMGR_CLKCNT_MSK); |
| break; |
| |
| case CLKMGR_CLKSRC_OSC1: |
| clock = cm_get_osc_clk_hz(); |
| break; |
| |
| case CLKMGR_CLKSRC_INTOSC: |
| clock = cm_get_intosc_clk_hz(); |
| break; |
| |
| case CLKMGR_CLKSRC_FPGA: |
| clock = cm_get_fpga_clk_hz(); |
| break; |
| default: |
| return 0; |
| } |
| |
| return clock; |
| } |
| |
| static u64 clk_get_mpu_clk_hz(struct socfpga_clk_plat *plat) |
| { |
| u64 clock; |
| u32 ctr_reg; |
| u32 cpu = ((read_mpidr() >> MPIDR_AFF1_OFFSET) & MPIDR_AFF1_OFFSET); |
| |
| if (cpu > CORE1) { |
| ctr_reg = CLKMGR_CTL_CORE23CTR; |
| |
| clock = clk_get_clksrc_hz(plat, ctr_reg, |
| CLKMGR_MAINPLL_PLLC0, |
| CLKMGR_PERPLL_PLLC0); |
| } else { |
| ctr_reg = CLKMGR_CTL_CORE01CTR; |
| |
| clock = clk_get_clksrc_hz(plat, ctr_reg, |
| CLKMGR_MAINPLL_PLLC1, |
| CLKMGR_PERPLL_PLLC0); |
| } |
| |
| if (cpu == CORE3) |
| ctr_reg = CLKMGR_CTL_CORE3CTR; |
| else if (cpu == CORE2) |
| ctr_reg = CLKMGR_CTL_CORE2CTR; |
| else |
| ctr_reg = CLKMGR_CTL_CORE01CTR; |
| |
| clock /= 1 + (CM_REG_READL(plat, ctr_reg) & |
| CLKMGR_CLKCNT_MSK); |
| |
| return clock; |
| } |
| |
| static u32 clk_get_l3_main_clk_hz(struct socfpga_clk_plat *plat) |
| { |
| return clk_get_clksrc_hz(plat, CLKMGR_MAINPLL_NOCCLK, |
| CLKMGR_MAINPLL_PLLC3, |
| CLKMGR_PERPLL_PLLC1); |
| } |
| |
| static u32 clk_get_l4_main_clk_hz(struct socfpga_clk_plat *plat) |
| { |
| u64 clock = clk_get_l3_main_clk_hz(plat); |
| |
| return clock; |
| } |
| |
| static u32 clk_get_l4_sp_clk_hz(struct socfpga_clk_plat *plat) |
| { |
| u64 clock = clk_get_l3_main_clk_hz(plat); |
| |
| clock /= BIT((CM_REG_READL(plat, CLKMGR_MAINPLL_NOCDIV) >> |
| CLKMGR_NOCDIV_L4SPCLK_OFFSET) & |
| CLKMGR_NOCDIV_DIVIDER_MASK); |
| |
| return clock; |
| } |
| |
| static u32 clk_get_l4_mp_clk_hz(struct socfpga_clk_plat *plat) |
| { |
| u64 clock = clk_get_l3_main_clk_hz(plat); |
| |
| clock /= BIT((CM_REG_READL(plat, CLKMGR_MAINPLL_NOCDIV) >> |
| CLKMGR_NOCDIV_L4MPCLK_OFFSET) & |
| CLKMGR_NOCDIV_DIVIDER_MASK); |
| |
| return clock; |
| } |
| |
| static u32 clk_get_sdmmc_clk_hz(struct socfpga_clk_plat *plat) |
| { |
| u64 clock = clk_get_l4_mp_clk_hz(plat); |
| |
| clock /= BIT((CM_REG_READL(plat, CLKMGR_MAINPLL_NOCDIV) >> |
| CLKMGR_NOCDIV_SOFTPHY_OFFSET) & |
| CLKMGR_NOCDIV_DIVIDER_MASK); |
| |
| return clock; |
| } |
| |
| static u32 clk_get_l4_sys_free_clk_hz(struct socfpga_clk_plat *plat) |
| { |
| if (CM_REG_READL(plat, CLKMGR_STAT) & CLKMGR_STAT_BOOTMODE) |
| return clk_get_l3_main_clk_hz(plat) / 2; |
| |
| return clk_get_l3_main_clk_hz(plat) / 4; |
| } |
| |
| static u32 clk_get_emac_clk_hz(struct socfpga_clk_plat *plat, u32 emac_id) |
| { |
| u32 ctl; |
| u32 ctr_reg; |
| u32 clock; |
| u32 div; |
| u32 reg; |
| |
| if (emac_id == AGILEX5_EMAC_PTP_CLK) { |
| reg = CM_REG_READL(plat, CLKMGR_CTL_EMACPTPCTR); |
| ctr_reg = CLKMGR_CTL_EMACPTPCTR; |
| } else { |
| reg = CM_REG_READL(plat, CLKMGR_CTL_EMACACTR); |
| ctl = CM_REG_READL(plat, CLKMGR_PERPLL_EMACCTL); |
| if (emac_id == AGILEX5_EMAC0_CLK) |
| ctl = (ctl & CLKMGR_PERPLLGRP_EMACCTL_EMAC0SELB_MASK) >> |
| CLKMGR_PERPLLGRP_EMACCTL_EMAC0SELB_OFFSET; |
| else if (emac_id == AGILEX5_EMAC1_CLK) |
| ctl = (ctl & CLKMGR_PERPLLGRP_EMACCTL_EMAC1SELB_MASK) >> |
| CLKMGR_PERPLLGRP_EMACCTL_EMAC1SELB_OFFSET; |
| else if (emac_id == AGILEX5_EMAC2_CLK) |
| ctl = (ctl & CLKMGR_PERPLLGRP_EMACCTL_EMAC2SELB_MASK) >> |
| CLKMGR_PERPLLGRP_EMACCTL_EMAC2SELB_OFFSET; |
| else |
| return 0; |
| |
| if (ctl) { |
| /* EMAC B source */ |
| ctr_reg = CLKMGR_CTL_EMACBCTR; |
| } else { |
| /* EMAC A source */ |
| ctr_reg = CLKMGR_CTL_EMACACTR; |
| } |
| } |
| /* Get EMAC clock source */ |
| clock = (reg & CLKMGR_CTL_EMACCTR_SRC_MASK) |
| >> CLKMGR_CTL_EMACCTR_SRC_OFFSET; |
| |
| reg = CM_REG_READL(plat, ctr_reg); |
| div = (reg & CLKMGR_CTL_EMACCTR_CNT_MASK) |
| >> CLKMGR_CTL_EMACCTR_CNT_OFFSET; |
| |
| switch (clock) { |
| case CLKMGR_CLKSRC_MAIN: |
| clock = clk_get_main_vco_clk_hz(plat); |
| |
| if (emac_id == AGILEX5_EMAC_PTP_CLK) { |
| clock /= (CM_REG_READL(plat, CLKMGR_MAINPLL_PLLC3) & |
| CLKMGR_CLKCNT_MSK); |
| } else { |
| clock /= (CM_REG_READL(plat, CLKMGR_MAINPLL_PLLC1) & |
| CLKMGR_CLKCNT_MSK); |
| } |
| break; |
| |
| case CLKMGR_CLKSRC_PER: |
| clock = clk_get_per_vco_clk_hz(plat); |
| |
| clock /= (CM_REG_READL(plat, CLKMGR_PERPLL_PLLC3) & |
| CLKMGR_CLKCNT_MSK); |
| break; |
| |
| case CLKMGR_CLKSRC_OSC1: |
| clock = cm_get_osc_clk_hz(); |
| break; |
| |
| case CLKMGR_CLKSRC_INTOSC: |
| clock = cm_get_intosc_clk_hz(); |
| break; |
| |
| case CLKMGR_CLKSRC_FPGA: |
| clock = cm_get_fpga_clk_hz(); |
| break; |
| } |
| |
| clock /= 1 + div; |
| |
| return clock; |
| } |
| |
| static ulong socfpga_clk_get_rate(struct clk *clk) |
| { |
| struct socfpga_clk_plat *plat = dev_get_plat(clk->dev); |
| |
| switch (clk->id) { |
| case AGILEX5_MPU_CLK: |
| return clk_get_mpu_clk_hz(plat); |
| case AGILEX5_L4_MAIN_CLK: |
| return clk_get_l4_main_clk_hz(plat); |
| case AGILEX5_L4_SYS_FREE_CLK: |
| return clk_get_l4_sys_free_clk_hz(plat); |
| case AGILEX5_L4_MP_CLK: |
| return clk_get_l4_mp_clk_hz(plat); |
| case AGILEX5_L4_SP_CLK: |
| return clk_get_l4_sp_clk_hz(plat); |
| case AGILEX5_SDMMC_CLK: |
| case AGILEX5_NAND_CLK: |
| return clk_get_sdmmc_clk_hz(plat); |
| case AGILEX5_EMAC0_CLK: |
| case AGILEX5_EMAC1_CLK: |
| case AGILEX5_EMAC2_CLK: |
| case AGILEX5_EMAC_PTP_CLK: |
| return clk_get_emac_clk_hz(plat, clk->id); |
| case AGILEX5_USB_CLK: |
| case AGILEX5_NAND_X_CLK: |
| return clk_get_l4_mp_clk_hz(plat); |
| default: |
| return -ENXIO; |
| } |
| } |
| |
| static int socfpga_clk_enable(struct clk *clk) |
| { |
| return 0; |
| } |
| |
| static int socfpga_clk_probe(struct udevice *dev) |
| { |
| const struct cm_config *cm_default_cfg = cm_get_default_config(); |
| |
| clk_basic_init(dev, cm_default_cfg); |
| |
| return 0; |
| } |
| |
| static int socfpga_clk_of_to_plat(struct udevice *dev) |
| { |
| struct socfpga_clk_plat *plat = dev_get_plat(dev); |
| fdt_addr_t addr; |
| |
| addr = dev_read_addr(dev); |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| plat->regs = (void __iomem *)addr; |
| |
| return 0; |
| } |
| |
| static struct clk_ops socfpga_clk_ops = { |
| .enable = socfpga_clk_enable, |
| .get_rate = socfpga_clk_get_rate, |
| }; |
| |
| static const struct udevice_id socfpga_clk_match[] = { |
| { .compatible = "intel,agilex5-clkmgr" }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(socfpga_agilex5_clk) = { |
| .name = "clk-agilex5", |
| .id = UCLASS_CLK, |
| .of_match = socfpga_clk_match, |
| .ops = &socfpga_clk_ops, |
| .probe = socfpga_clk_probe, |
| .of_to_plat = socfpga_clk_of_to_plat, |
| .plat_auto = sizeof(struct socfpga_clk_plat), |
| }; |