| /* |
| * Copyright (C) 2012-2015 Samsung Electronics |
| * |
| * Rajeshwari Shinde <rajeshwari.s@samsung.com> |
| * Przemyslaw Marczak <p.marczak@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <fdtdec.h> |
| #include <errno.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <power/pmic.h> |
| #include <power/regulator.h> |
| #include <power/max77686_pmic.h> |
| |
| #define MODE(_id, _val, _name) { \ |
| .id = _id, \ |
| .register_value = _val, \ |
| .name = _name, \ |
| } |
| |
| /* LDO: 1,3,4,5,9,17,18,19,20,21,22,23,24,26,26,27 */ |
| static struct dm_regulator_mode max77686_ldo_mode_standby1[] = { |
| MODE(OPMODE_OFF, MAX77686_LDO_MODE_OFF, "OFF"), |
| MODE(OPMODE_LPM, MAX77686_LDO_MODE_LPM, "LPM"), |
| MODE(OPMODE_STANDBY_LPM, MAX77686_LDO_MODE_STANDBY_LPM, "ON/LPM"), |
| MODE(OPMODE_ON, MAX77686_LDO_MODE_ON, "ON"), |
| }; |
| |
| /* LDO: 2,6,7,8,10,11,12,14,15,16 */ |
| static struct dm_regulator_mode max77686_ldo_mode_standby2[] = { |
| MODE(OPMODE_OFF, MAX77686_LDO_MODE_OFF, "OFF"), |
| MODE(OPMODE_STANDBY, MAX77686_LDO_MODE_STANDBY, "ON/OFF"), |
| MODE(OPMODE_STANDBY_LPM, MAX77686_LDO_MODE_STANDBY_LPM, "ON/LPM"), |
| MODE(OPMODE_ON, MAX77686_LDO_MODE_ON, "ON"), |
| }; |
| |
| /* Buck: 1 */ |
| static struct dm_regulator_mode max77686_buck_mode_standby[] = { |
| MODE(OPMODE_OFF, MAX77686_BUCK_MODE_OFF, "OFF"), |
| MODE(OPMODE_STANDBY, MAX77686_BUCK_MODE_STANDBY, "ON/OFF"), |
| MODE(OPMODE_ON, MAX77686_BUCK_MODE_ON, "ON"), |
| }; |
| |
| /* Buck: 2,3,4 */ |
| static struct dm_regulator_mode max77686_buck_mode_lpm[] = { |
| MODE(OPMODE_OFF, MAX77686_BUCK_MODE_OFF, "OFF"), |
| MODE(OPMODE_STANDBY, MAX77686_BUCK_MODE_STANDBY, "ON/OFF"), |
| MODE(OPMODE_LPM, MAX77686_BUCK_MODE_LPM, "LPM"), |
| MODE(OPMODE_ON, MAX77686_BUCK_MODE_ON, "ON"), |
| }; |
| |
| /* Buck: 5,6,7,8,9 */ |
| static struct dm_regulator_mode max77686_buck_mode_onoff[] = { |
| MODE(OPMODE_OFF, MAX77686_BUCK_MODE_OFF, "OFF"), |
| MODE(OPMODE_ON, MAX77686_BUCK_MODE_ON, "ON"), |
| }; |
| |
| static const char max77686_buck_ctrl[] = { |
| 0xff, 0x10, 0x12, 0x1c, 0x26, 0x30, 0x32, 0x34, 0x36, 0x38 |
| }; |
| |
| static const char max77686_buck_out[] = { |
| 0xff, 0x11, 0x14, 0x1e, 0x28, 0x31, 0x33, 0x35, 0x37, 0x39 |
| }; |
| |
| static int max77686_buck_volt2hex(int buck, int uV) |
| { |
| int hex = 0; |
| int hex_max = 0; |
| |
| switch (buck) { |
| case 2: |
| case 3: |
| case 4: |
| /* hex = (uV - 600000) / 12500; */ |
| hex = (uV - MAX77686_BUCK_UV_LMIN) / MAX77686_BUCK_UV_LSTEP; |
| hex_max = MAX77686_BUCK234_VOLT_MAX_HEX; |
| break; |
| default: |
| /* |
| * hex = (uV - 750000) / 50000. We assume that dynamic voltage |
| * scaling via GPIOs is not enabled and don't support that. |
| * If this is enabled then the driver will need to take that |
| * into account and check different registers depending on |
| * the current setting. See the datasheet for details. |
| */ |
| hex = (uV - MAX77686_BUCK_UV_HMIN) / MAX77686_BUCK_UV_HSTEP; |
| hex_max = MAX77686_BUCK_VOLT_MAX_HEX; |
| break; |
| } |
| |
| if (hex >= 0 && hex <= hex_max) |
| return hex; |
| |
| pr_err("Value: %d uV is wrong for BUCK%d", uV, buck); |
| return -EINVAL; |
| } |
| |
| static int max77686_buck_hex2volt(int buck, int hex) |
| { |
| unsigned uV = 0; |
| int hex_max = 0; |
| |
| if (hex < 0) |
| goto bad_hex; |
| |
| switch (buck) { |
| case 2: |
| case 3: |
| case 4: |
| hex_max = MAX77686_BUCK234_VOLT_MAX_HEX; |
| if (hex > hex_max) |
| goto bad_hex; |
| |
| /* uV = hex * 12500 + 600000; */ |
| uV = hex * MAX77686_BUCK_UV_LSTEP + MAX77686_BUCK_UV_LMIN; |
| break; |
| default: |
| hex_max = MAX77686_BUCK_VOLT_MAX_HEX; |
| if (hex > hex_max) |
| goto bad_hex; |
| |
| /* uV = hex * 50000 + 750000; */ |
| uV = hex * MAX77686_BUCK_UV_HSTEP + MAX77686_BUCK_UV_HMIN; |
| break; |
| } |
| |
| return uV; |
| |
| bad_hex: |
| pr_err("Value: %#x is wrong for BUCK%d", hex, buck); |
| return -EINVAL; |
| } |
| |
| static int max77686_ldo_volt2hex(int ldo, int uV) |
| { |
| int hex = 0; |
| |
| switch (ldo) { |
| case 1: |
| case 2: |
| case 6: |
| case 7: |
| case 8: |
| case 15: |
| hex = (uV - MAX77686_LDO_UV_MIN) / MAX77686_LDO_UV_LSTEP; |
| /* hex = (uV - 800000) / 25000; */ |
| break; |
| default: |
| hex = (uV - MAX77686_LDO_UV_MIN) / MAX77686_LDO_UV_HSTEP; |
| /* hex = (uV - 800000) / 50000; */ |
| } |
| |
| if (hex >= 0 && hex <= MAX77686_LDO_VOLT_MAX_HEX) |
| return hex; |
| |
| pr_err("Value: %d uV is wrong for LDO%d", uV, ldo); |
| return -EINVAL; |
| } |
| |
| static int max77686_ldo_hex2volt(int ldo, int hex) |
| { |
| unsigned int uV = 0; |
| |
| if (hex > MAX77686_LDO_VOLT_MAX_HEX) |
| goto bad_hex; |
| |
| switch (ldo) { |
| case 1: |
| case 2: |
| case 6: |
| case 7: |
| case 8: |
| case 15: |
| /* uV = hex * 25000 + 800000; */ |
| uV = hex * MAX77686_LDO_UV_LSTEP + MAX77686_LDO_UV_MIN; |
| break; |
| default: |
| /* uV = hex * 50000 + 800000; */ |
| uV = hex * MAX77686_LDO_UV_HSTEP + MAX77686_LDO_UV_MIN; |
| } |
| |
| return uV; |
| |
| bad_hex: |
| pr_err("Value: %#x is wrong for ldo%d", hex, ldo); |
| return -EINVAL; |
| } |
| |
| static int max77686_ldo_hex2mode(int ldo, int hex) |
| { |
| if (hex > MAX77686_LDO_MODE_MASK) |
| return -EINVAL; |
| |
| switch (hex) { |
| case MAX77686_LDO_MODE_OFF: |
| return OPMODE_OFF; |
| case MAX77686_LDO_MODE_LPM: /* == MAX77686_LDO_MODE_STANDBY: */ |
| /* The same mode values but different meaning for each ldo */ |
| switch (ldo) { |
| case 2: |
| case 6: |
| case 7: |
| case 8: |
| case 10: |
| case 11: |
| case 12: |
| case 14: |
| case 15: |
| case 16: |
| return OPMODE_STANDBY; |
| default: |
| return OPMODE_LPM; |
| } |
| case MAX77686_LDO_MODE_STANDBY_LPM: |
| return OPMODE_STANDBY_LPM; |
| case MAX77686_LDO_MODE_ON: |
| return OPMODE_ON; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int max77686_buck_hex2mode(int buck, int hex) |
| { |
| if (hex > MAX77686_BUCK_MODE_MASK) |
| return -EINVAL; |
| |
| switch (hex) { |
| case MAX77686_BUCK_MODE_OFF: |
| return OPMODE_OFF; |
| case MAX77686_BUCK_MODE_ON: |
| return OPMODE_ON; |
| case MAX77686_BUCK_MODE_STANDBY: |
| switch (buck) { |
| case 1: |
| case 2: |
| case 3: |
| case 4: |
| return OPMODE_STANDBY; |
| default: |
| return -EINVAL; |
| } |
| case MAX77686_BUCK_MODE_LPM: |
| switch (buck) { |
| case 2: |
| case 3: |
| case 4: |
| return OPMODE_LPM; |
| default: |
| return -EINVAL; |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int max77686_buck_modes(int buck, struct dm_regulator_mode **modesp) |
| { |
| int ret = -EINVAL; |
| |
| if (buck < 1 || buck > MAX77686_BUCK_NUM) |
| return ret; |
| |
| switch (buck) { |
| case 1: |
| *modesp = max77686_buck_mode_standby; |
| ret = ARRAY_SIZE(max77686_buck_mode_standby); |
| break; |
| case 2: |
| case 3: |
| case 4: |
| *modesp = max77686_buck_mode_lpm; |
| ret = ARRAY_SIZE(max77686_buck_mode_lpm); |
| break; |
| default: |
| *modesp = max77686_buck_mode_onoff; |
| ret = ARRAY_SIZE(max77686_buck_mode_onoff); |
| } |
| |
| return ret; |
| } |
| |
| static int max77686_ldo_modes(int ldo, struct dm_regulator_mode **modesp, |
| struct udevice *dev) |
| { |
| int ret = -EINVAL; |
| |
| if (ldo < 1 || ldo > MAX77686_LDO_NUM) |
| return ret; |
| |
| switch (ldo) { |
| case 2: |
| case 6: |
| case 7: |
| case 8: |
| case 10: |
| case 11: |
| case 12: |
| case 14: |
| case 15: |
| case 16: |
| *modesp = max77686_ldo_mode_standby2; |
| ret = ARRAY_SIZE(max77686_ldo_mode_standby2); |
| break; |
| default: |
| *modesp = max77686_ldo_mode_standby1; |
| ret = ARRAY_SIZE(max77686_ldo_mode_standby1); |
| } |
| |
| return ret; |
| } |
| |
| static int max77686_ldo_val(struct udevice *dev, int op, int *uV) |
| { |
| unsigned int adr; |
| unsigned char val; |
| int hex, ldo, ret; |
| |
| if (op == PMIC_OP_GET) |
| *uV = 0; |
| |
| ldo = dev->driver_data; |
| if (ldo < 1 || ldo > MAX77686_LDO_NUM) { |
| pr_err("Wrong ldo number: %d", ldo); |
| return -EINVAL; |
| } |
| |
| adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1; |
| |
| ret = pmic_read(dev->parent, adr, &val, 1); |
| if (ret) |
| return ret; |
| |
| if (op == PMIC_OP_GET) { |
| val &= MAX77686_LDO_VOLT_MASK; |
| ret = max77686_ldo_hex2volt(ldo, val); |
| if (ret < 0) |
| return ret; |
| *uV = ret; |
| return 0; |
| } |
| |
| hex = max77686_ldo_volt2hex(ldo, *uV); |
| if (hex < 0) |
| return hex; |
| |
| val &= ~MAX77686_LDO_VOLT_MASK; |
| val |= hex; |
| ret = pmic_write(dev->parent, adr, &val, 1); |
| |
| return ret; |
| } |
| |
| static int max77686_buck_val(struct udevice *dev, int op, int *uV) |
| { |
| unsigned int mask, adr; |
| unsigned char val; |
| int hex, buck, ret; |
| |
| buck = dev->driver_data; |
| if (buck < 1 || buck > MAX77686_BUCK_NUM) { |
| pr_err("Wrong buck number: %d", buck); |
| return -EINVAL; |
| } |
| |
| if (op == PMIC_OP_GET) |
| *uV = 0; |
| |
| /* &buck_out = ctrl + 1 */ |
| adr = max77686_buck_out[buck]; |
| |
| /* mask */ |
| switch (buck) { |
| case 2: |
| case 3: |
| case 4: |
| mask = MAX77686_BUCK234_VOLT_MASK; |
| break; |
| default: |
| mask = MAX77686_BUCK_VOLT_MASK; |
| break; |
| } |
| |
| ret = pmic_read(dev->parent, adr, &val, 1); |
| if (ret) |
| return ret; |
| |
| if (op == PMIC_OP_GET) { |
| val &= mask; |
| ret = max77686_buck_hex2volt(buck, val); |
| if (ret < 0) |
| return ret; |
| *uV = ret; |
| return 0; |
| } |
| |
| hex = max77686_buck_volt2hex(buck, *uV); |
| if (hex < 0) |
| return hex; |
| |
| val &= ~mask; |
| val |= hex; |
| ret = pmic_write(dev->parent, adr, &val, 1); |
| |
| return ret; |
| } |
| |
| static int max77686_ldo_mode(struct udevice *dev, int op, int *opmode) |
| { |
| unsigned int adr, mode; |
| unsigned char val; |
| int ldo, ret; |
| |
| if (op == PMIC_OP_GET) |
| *opmode = -EINVAL; |
| |
| ldo = dev->driver_data; |
| if (ldo < 1 || ldo > MAX77686_LDO_NUM) { |
| pr_err("Wrong ldo number: %d", ldo); |
| return -EINVAL; |
| } |
| |
| adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1; |
| |
| ret = pmic_read(dev->parent, adr, &val, 1); |
| if (ret) |
| return ret; |
| |
| if (op == PMIC_OP_GET) { |
| val &= MAX77686_LDO_MODE_MASK; |
| ret = max77686_ldo_hex2mode(ldo, val); |
| if (ret < 0) |
| return ret; |
| *opmode = ret; |
| return 0; |
| } |
| |
| /* mode */ |
| switch (*opmode) { |
| case OPMODE_OFF: |
| mode = MAX77686_LDO_MODE_OFF; |
| break; |
| case OPMODE_LPM: |
| switch (ldo) { |
| case 2: |
| case 6: |
| case 7: |
| case 8: |
| case 10: |
| case 11: |
| case 12: |
| case 14: |
| case 15: |
| case 16: |
| return -EINVAL; |
| default: |
| mode = MAX77686_LDO_MODE_LPM; |
| } |
| break; |
| case OPMODE_STANDBY: |
| switch (ldo) { |
| case 2: |
| case 6: |
| case 7: |
| case 8: |
| case 10: |
| case 11: |
| case 12: |
| case 14: |
| case 15: |
| case 16: |
| mode = MAX77686_LDO_MODE_STANDBY; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| case OPMODE_STANDBY_LPM: |
| mode = MAX77686_LDO_MODE_STANDBY_LPM; |
| break; |
| case OPMODE_ON: |
| mode = MAX77686_LDO_MODE_ON; |
| break; |
| default: |
| mode = 0xff; |
| } |
| |
| if (mode == 0xff) { |
| pr_err("Wrong mode: %d for ldo%d", *opmode, ldo); |
| return -EINVAL; |
| } |
| |
| val &= ~MAX77686_LDO_MODE_MASK; |
| val |= mode; |
| ret = pmic_write(dev->parent, adr, &val, 1); |
| |
| return ret; |
| } |
| |
| static int max77686_ldo_enable(struct udevice *dev, int op, bool *enable) |
| { |
| int ret, on_off; |
| |
| if (op == PMIC_OP_GET) { |
| ret = max77686_ldo_mode(dev, op, &on_off); |
| if (ret) |
| return ret; |
| |
| switch (on_off) { |
| case OPMODE_OFF: |
| *enable = false; |
| break; |
| case OPMODE_ON: |
| *enable = true; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } else if (op == PMIC_OP_SET) { |
| if (*enable) |
| on_off = OPMODE_ON; |
| else |
| on_off = OPMODE_OFF; |
| |
| ret = max77686_ldo_mode(dev, op, &on_off); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int max77686_buck_mode(struct udevice *dev, int op, int *opmode) |
| { |
| unsigned int mask, adr, mode, mode_shift; |
| unsigned char val; |
| int buck, ret; |
| |
| buck = dev->driver_data; |
| if (buck < 1 || buck > MAX77686_BUCK_NUM) { |
| pr_err("Wrong buck number: %d", buck); |
| return -EINVAL; |
| } |
| |
| adr = max77686_buck_ctrl[buck]; |
| |
| /* mask */ |
| switch (buck) { |
| case 2: |
| case 3: |
| case 4: |
| mode_shift = MAX77686_BUCK_MODE_SHIFT_2; |
| break; |
| default: |
| mode_shift = MAX77686_BUCK_MODE_SHIFT_1; |
| } |
| |
| mask = MAX77686_BUCK_MODE_MASK << mode_shift; |
| |
| ret = pmic_read(dev->parent, adr, &val, 1); |
| if (ret) |
| return ret; |
| |
| if (op == PMIC_OP_GET) { |
| val &= mask; |
| val >>= mode_shift; |
| ret = max77686_buck_hex2mode(buck, val); |
| if (ret < 0) |
| return ret; |
| *opmode = ret; |
| return 0; |
| } |
| |
| /* mode */ |
| switch (*opmode) { |
| case OPMODE_OFF: |
| mode = MAX77686_BUCK_MODE_OFF; |
| break; |
| case OPMODE_STANDBY: |
| switch (buck) { |
| case 1: |
| case 2: |
| case 3: |
| case 4: |
| mode = MAX77686_BUCK_MODE_STANDBY << mode_shift; |
| break; |
| default: |
| mode = 0xff; |
| } |
| break; |
| case OPMODE_LPM: |
| switch (buck) { |
| case 2: |
| case 3: |
| case 4: |
| mode = MAX77686_BUCK_MODE_LPM << mode_shift; |
| break; |
| default: |
| mode = 0xff; |
| } |
| break; |
| case OPMODE_ON: |
| mode = MAX77686_BUCK_MODE_ON << mode_shift; |
| break; |
| default: |
| mode = 0xff; |
| } |
| |
| if (mode == 0xff) { |
| pr_err("Wrong mode: %d for buck: %d\n", *opmode, buck); |
| return -EINVAL; |
| } |
| |
| val &= ~mask; |
| val |= mode; |
| ret = pmic_write(dev->parent, adr, &val, 1); |
| |
| return ret; |
| } |
| |
| static int max77686_buck_enable(struct udevice *dev, int op, bool *enable) |
| { |
| int ret, on_off; |
| |
| if (op == PMIC_OP_GET) { |
| ret = max77686_buck_mode(dev, op, &on_off); |
| if (ret) |
| return ret; |
| |
| switch (on_off) { |
| case OPMODE_OFF: |
| *enable = false; |
| break; |
| case OPMODE_ON: |
| *enable = true; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } else if (op == PMIC_OP_SET) { |
| if (*enable) |
| on_off = OPMODE_ON; |
| else |
| on_off = OPMODE_OFF; |
| |
| ret = max77686_buck_mode(dev, op, &on_off); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int max77686_ldo_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| |
| uc_pdata = dev_get_uclass_platdata(dev); |
| |
| uc_pdata->type = REGULATOR_TYPE_LDO; |
| uc_pdata->mode_count = max77686_ldo_modes(dev->driver_data, |
| &uc_pdata->mode, dev); |
| |
| return 0; |
| } |
| |
| static int ldo_get_value(struct udevice *dev) |
| { |
| int uV; |
| int ret; |
| |
| ret = max77686_ldo_val(dev, PMIC_OP_GET, &uV); |
| if (ret) |
| return ret; |
| |
| return uV; |
| } |
| |
| static int ldo_set_value(struct udevice *dev, int uV) |
| { |
| return max77686_ldo_val(dev, PMIC_OP_SET, &uV); |
| } |
| |
| static int ldo_get_enable(struct udevice *dev) |
| { |
| bool enable = false; |
| int ret; |
| |
| ret = max77686_ldo_enable(dev, PMIC_OP_GET, &enable); |
| if (ret) |
| return ret; |
| |
| return enable; |
| } |
| |
| static int ldo_set_enable(struct udevice *dev, bool enable) |
| { |
| return max77686_ldo_enable(dev, PMIC_OP_SET, &enable); |
| } |
| |
| static int ldo_get_mode(struct udevice *dev) |
| { |
| int mode; |
| int ret; |
| |
| ret = max77686_ldo_mode(dev, PMIC_OP_GET, &mode); |
| if (ret) |
| return ret; |
| |
| return mode; |
| } |
| |
| static int ldo_set_mode(struct udevice *dev, int mode) |
| { |
| return max77686_ldo_mode(dev, PMIC_OP_SET, &mode); |
| } |
| |
| static int max77686_buck_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_platdata *uc_pdata; |
| |
| uc_pdata = dev_get_uclass_platdata(dev); |
| |
| uc_pdata->type = REGULATOR_TYPE_BUCK; |
| uc_pdata->mode_count = max77686_buck_modes(dev->driver_data, |
| &uc_pdata->mode); |
| |
| return 0; |
| } |
| |
| static int buck_get_value(struct udevice *dev) |
| { |
| int uV; |
| int ret; |
| |
| ret = max77686_buck_val(dev, PMIC_OP_GET, &uV); |
| if (ret) |
| return ret; |
| |
| return uV; |
| } |
| |
| static int buck_set_value(struct udevice *dev, int uV) |
| { |
| return max77686_buck_val(dev, PMIC_OP_SET, &uV); |
| } |
| |
| static int buck_get_enable(struct udevice *dev) |
| { |
| bool enable = false; |
| int ret; |
| |
| ret = max77686_buck_enable(dev, PMIC_OP_GET, &enable); |
| if (ret) |
| return ret; |
| |
| return enable; |
| } |
| |
| static int buck_set_enable(struct udevice *dev, bool enable) |
| { |
| return max77686_buck_enable(dev, PMIC_OP_SET, &enable); |
| } |
| |
| static int buck_get_mode(struct udevice *dev) |
| { |
| int mode; |
| int ret; |
| |
| ret = max77686_buck_mode(dev, PMIC_OP_GET, &mode); |
| if (ret) |
| return ret; |
| |
| return mode; |
| } |
| |
| static int buck_set_mode(struct udevice *dev, int mode) |
| { |
| return max77686_buck_mode(dev, PMIC_OP_SET, &mode); |
| } |
| |
| static const struct dm_regulator_ops max77686_ldo_ops = { |
| .get_value = ldo_get_value, |
| .set_value = ldo_set_value, |
| .get_enable = ldo_get_enable, |
| .set_enable = ldo_set_enable, |
| .get_mode = ldo_get_mode, |
| .set_mode = ldo_set_mode, |
| }; |
| |
| U_BOOT_DRIVER(max77686_ldo) = { |
| .name = MAX77686_LDO_DRIVER, |
| .id = UCLASS_REGULATOR, |
| .ops = &max77686_ldo_ops, |
| .probe = max77686_ldo_probe, |
| }; |
| |
| static const struct dm_regulator_ops max77686_buck_ops = { |
| .get_value = buck_get_value, |
| .set_value = buck_set_value, |
| .get_enable = buck_get_enable, |
| .set_enable = buck_set_enable, |
| .get_mode = buck_get_mode, |
| .set_mode = buck_set_mode, |
| }; |
| |
| U_BOOT_DRIVER(max77686_buck) = { |
| .name = MAX77686_BUCK_DRIVER, |
| .id = UCLASS_REGULATOR, |
| .ops = &max77686_buck_ops, |
| .probe = max77686_buck_probe, |
| }; |