| /* |
| * Copyright (C) 2006 Freescale Semiconductor, Inc. |
| * Dave Liu <daveliu@freescale.com> |
| * |
| * Copyright (C) 2007 Logic Product Development, Inc. |
| * Peter Barada <peterb@logicpd.com> |
| * |
| * Copyright (C) 2007 MontaVista Software, Inc. |
| * Anton Vorontsov <avorontsov@ru.mvista.com> |
| * |
| * (C) Copyright 2008 - 2010 |
| * Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <ioports.h> |
| #include <mpc83xx.h> |
| #include <i2c.h> |
| #include <miiphy.h> |
| #include <asm/io.h> |
| #include <asm/mmu.h> |
| #include <asm/processor.h> |
| #include <pci.h> |
| #include <linux/libfdt.h> |
| #include <post.h> |
| |
| #include "../common/common.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN]; |
| |
| const qe_iop_conf_t qe_iop_conf_tab[] = { |
| /* port pin dir open_drain assign */ |
| #if defined(CONFIG_MPC8360) |
| /* MDIO */ |
| {0, 1, 3, 0, 2}, /* MDIO */ |
| {0, 2, 1, 0, 1}, /* MDC */ |
| |
| /* UCC4 - UEC */ |
| {1, 14, 1, 0, 1}, /* TxD0 */ |
| {1, 15, 1, 0, 1}, /* TxD1 */ |
| {1, 20, 2, 0, 1}, /* RxD0 */ |
| {1, 21, 2, 0, 1}, /* RxD1 */ |
| {1, 18, 1, 0, 1}, /* TX_EN */ |
| {1, 26, 2, 0, 1}, /* RX_DV */ |
| {1, 27, 2, 0, 1}, /* RX_ER */ |
| {1, 24, 2, 0, 1}, /* COL */ |
| {1, 25, 2, 0, 1}, /* CRS */ |
| {2, 15, 2, 0, 1}, /* TX_CLK - CLK16 */ |
| {2, 16, 2, 0, 1}, /* RX_CLK - CLK17 */ |
| |
| /* DUART - UART2 */ |
| {5, 0, 1, 0, 2}, /* UART2_SOUT */ |
| {5, 2, 1, 0, 1}, /* UART2_RTS */ |
| {5, 3, 2, 0, 2}, /* UART2_SIN */ |
| {5, 1, 2, 0, 3}, /* UART2_CTS */ |
| #elif !defined(CONFIG_MPC8309) |
| /* Local Bus */ |
| {0, 16, 1, 0, 3}, /* LA00 */ |
| {0, 17, 1, 0, 3}, /* LA01 */ |
| {0, 18, 1, 0, 3}, /* LA02 */ |
| {0, 19, 1, 0, 3}, /* LA03 */ |
| {0, 20, 1, 0, 3}, /* LA04 */ |
| {0, 21, 1, 0, 3}, /* LA05 */ |
| {0, 22, 1, 0, 3}, /* LA06 */ |
| {0, 23, 1, 0, 3}, /* LA07 */ |
| {0, 24, 1, 0, 3}, /* LA08 */ |
| {0, 25, 1, 0, 3}, /* LA09 */ |
| {0, 26, 1, 0, 3}, /* LA10 */ |
| {0, 27, 1, 0, 3}, /* LA11 */ |
| {0, 28, 1, 0, 3}, /* LA12 */ |
| {0, 29, 1, 0, 3}, /* LA13 */ |
| {0, 30, 1, 0, 3}, /* LA14 */ |
| {0, 31, 1, 0, 3}, /* LA15 */ |
| |
| /* MDIO */ |
| {3, 4, 3, 0, 2}, /* MDIO */ |
| {3, 5, 1, 0, 2}, /* MDC */ |
| |
| /* UCC4 - UEC */ |
| {1, 18, 1, 0, 1}, /* TxD0 */ |
| {1, 19, 1, 0, 1}, /* TxD1 */ |
| {1, 22, 2, 0, 1}, /* RxD0 */ |
| {1, 23, 2, 0, 1}, /* RxD1 */ |
| {1, 26, 2, 0, 1}, /* RxER */ |
| {1, 28, 2, 0, 1}, /* Rx_DV */ |
| {1, 30, 1, 0, 1}, /* TxEN */ |
| {1, 31, 2, 0, 1}, /* CRS */ |
| {3, 10, 2, 0, 3}, /* TxCLK->CLK17 */ |
| #endif |
| |
| /* END of table */ |
| {0, 0, 0, 0, QE_IOP_TAB_END}, |
| }; |
| |
| #if defined(CONFIG_SUVD3) |
| const uint upma_table[] = { |
| 0x1ffedc00, 0x0ffcdc80, 0x0ffcdc80, 0x0ffcdc04, /* Words 0 to 3 */ |
| 0x0ffcdc00, 0xffffcc00, 0xffffcc01, 0xfffffc01, /* Words 4 to 7 */ |
| 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 8 to 11 */ |
| 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 12 to 15 */ |
| 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 16 to 19 */ |
| 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 20 to 23 */ |
| 0x9cfffc00, 0x00fffc80, 0x00fffc80, 0x00fffc00, /* Words 24 to 27 */ |
| 0xffffec04, 0xffffec01, 0xfffffc01, 0xfffffc01, /* Words 28 to 31 */ |
| 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 32 to 35 */ |
| 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 36 to 39 */ |
| 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 40 to 43 */ |
| 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 44 to 47 */ |
| 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 48 to 51 */ |
| 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 52 to 55 */ |
| 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 56 to 59 */ |
| 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01 /* Words 60 to 63 */ |
| }; |
| #endif |
| |
| static int piggy_present(void) |
| { |
| struct km_bec_fpga __iomem *base = |
| (struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE; |
| |
| return in_8(&base->bprth) & PIGGY_PRESENT; |
| } |
| |
| #if defined(CONFIG_KMVECT1) |
| int ethernet_present(void) |
| { |
| /* ethernet port connected to simple switch without piggy */ |
| return 1; |
| } |
| #else |
| int ethernet_present(void) |
| { |
| return piggy_present(); |
| } |
| #endif |
| |
| |
| int board_early_init_r(void) |
| { |
| struct km_bec_fpga *base = |
| (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE; |
| #if defined(CONFIG_SUVD3) |
| immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; |
| fsl_lbc_t *lbc = &immap->im_lbc; |
| u32 *mxmr = &lbc->mamr; |
| #endif |
| |
| #if defined(CONFIG_MPC8360) |
| unsigned short svid; |
| /* |
| * Because of errata in the UCCs, we have to write to the reserved |
| * registers to slow the clocks down. |
| */ |
| svid = SVR_REV(mfspr(SVR)); |
| switch (svid) { |
| case 0x0020: |
| /* |
| * MPC8360ECE.pdf QE_ENET10 table 4: |
| * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2) |
| * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1) |
| */ |
| setbits_be32((void *)(CONFIG_SYS_IMMR + 0x14a8), 0x0c003000); |
| break; |
| case 0x0021: |
| /* |
| * MPC8360ECE.pdf QE_ENET10 table 4: |
| * IMMR + 0x14AC[24:27] = 1010 |
| */ |
| clrsetbits_be32((void *)(CONFIG_SYS_IMMR + 0x14ac), |
| 0x00000050, 0x000000a0); |
| break; |
| } |
| #endif |
| |
| /* enable the PHY on the PIGGY */ |
| setbits_8(&base->pgy_eth, 0x01); |
| /* enable the Unit LED (green) */ |
| setbits_8(&base->oprth, WRL_BOOT); |
| /* enable Application Buffer */ |
| setbits_8(&base->oprtl, OPRTL_XBUFENA); |
| |
| #if defined(CONFIG_SUVD3) |
| /* configure UPMA for APP1 */ |
| upmconfig(UPMA, (uint *) upma_table, |
| sizeof(upma_table) / sizeof(uint)); |
| out_be32(mxmr, CONFIG_SYS_MAMR); |
| #endif |
| return 0; |
| } |
| |
| int misc_init_r(void) |
| { |
| ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN); |
| return 0; |
| } |
| |
| #if defined(CONFIG_KMVECT1) |
| #include <mv88e6352.h> |
| /* Marvell MV88E6122 switch configuration */ |
| static struct mv88e_sw_reg extsw_conf[] = { |
| /* port 1, FRONT_MDI, autoneg */ |
| { PORT(1), PORT_PHY, NO_SPEED_FOR }, |
| { PORT(1), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, |
| { PHY(1), PHY_1000_CTRL, NO_ADV }, |
| { PHY(1), PHY_SPEC_CTRL, AUTO_MDIX_EN }, |
| { PHY(1), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST | |
| FULL_DUPLEX }, |
| /* port 2, unused */ |
| { PORT(2), PORT_CTRL, PORT_DIS }, |
| { PHY(2), PHY_CTRL, PHY_PWR_DOWN }, |
| { PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN }, |
| /* port 3, BP_MII (CPU), PHY mode, 100BASE */ |
| { PORT(3), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, |
| /* port 4, ESTAR to slot 11, SerDes, 1000BASE-X */ |
| { PORT(4), PORT_STATUS, NO_PHY_DETECT }, |
| { PORT(4), PORT_PHY, SPEED_1000_FOR }, |
| { PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, |
| /* port 5, ESTAR to slot 13, SerDes, 1000BASE-X */ |
| { PORT(5), PORT_STATUS, NO_PHY_DETECT }, |
| { PORT(5), PORT_PHY, SPEED_1000_FOR }, |
| { PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, |
| /* |
| * Errata Fix: 1.9V Output from Internal 1.8V Regulator, |
| * acc . MV-S300889-00D.pdf , clause 4.5 |
| */ |
| { PORT(5), 0x1A, 0xADB1 }, |
| /* port 6, unused, this port has no phy */ |
| { PORT(6), PORT_CTRL, PORT_DIS }, |
| /* |
| * Errata Fix: 1.9V Output from Internal 1.8V Regulator, |
| * acc . MV-S300889-00D.pdf , clause 4.5 |
| */ |
| { PORT(5), 0x1A, 0xADB1 }, |
| }; |
| #endif |
| |
| int last_stage_init(void) |
| { |
| #if defined(CONFIG_KMVECT1) |
| struct km_bec_fpga __iomem *base = |
| (struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE; |
| u8 tmp_reg; |
| |
| /* Release mv88e6122 from reset */ |
| tmp_reg = in_8(&base->res1[0]) | 0x10; /* DIRECT3 register */ |
| out_8(&base->res1[0], tmp_reg); /* GP28 as output */ |
| tmp_reg = in_8(&base->gprt3) | 0x10; /* GP28 to high */ |
| out_8(&base->gprt3, tmp_reg); |
| |
| /* configure MV88E6122 switch */ |
| char *name = "UEC2"; |
| |
| if (miiphy_set_current_dev(name)) |
| return 0; |
| |
| mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf, |
| ARRAY_SIZE(extsw_conf)); |
| |
| mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR); |
| |
| if (piggy_present()) { |
| env_set("ethact", "UEC2"); |
| env_set("netdev", "eth1"); |
| puts("using PIGGY for network boot\n"); |
| } else { |
| env_set("netdev", "eth0"); |
| puts("using frontport for network boot\n"); |
| } |
| #endif |
| |
| #if defined(CONFIG_KMCOGE5NE) |
| struct bfticu_iomap *base = |
| (struct bfticu_iomap *)CONFIG_SYS_BFTIC3_BASE; |
| u8 dip_switch = in_8((u8 *)&(base->mswitch)) & BFTICU_DIPSWITCH_MASK; |
| |
| if (dip_switch != 0) { |
| /* start bootloader */ |
| puts("DIP: Enabled\n"); |
| env_set("actual_bank", "0"); |
| } |
| #endif |
| set_km_env(); |
| return 0; |
| } |
| |
| static int fixed_sdram(void) |
| { |
| immap_t *im = (immap_t *)CONFIG_SYS_IMMR; |
| u32 msize = 0; |
| u32 ddr_size; |
| u32 ddr_size_log2; |
| |
| out_be32(&im->sysconf.ddrlaw[0].ar, (LAWAR_EN | 0x1e)); |
| out_be32(&im->ddr.csbnds[0].csbnds, (CONFIG_SYS_DDR_CS0_BNDS) | 0x7f); |
| out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG); |
| out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); |
| out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); |
| out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); |
| out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); |
| out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG); |
| out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2); |
| out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE); |
| out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2); |
| out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL); |
| out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL); |
| udelay(200); |
| setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); |
| |
| msize = CONFIG_SYS_DDR_SIZE << 20; |
| disable_addr_trans(); |
| msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize); |
| enable_addr_trans(); |
| msize /= (1024 * 1024); |
| if (CONFIG_SYS_DDR_SIZE != msize) { |
| for (ddr_size = msize << 20, ddr_size_log2 = 0; |
| (ddr_size > 1); |
| ddr_size = ddr_size >> 1, ddr_size_log2++) |
| if (ddr_size & 1) |
| return -1; |
| out_be32(&im->sysconf.ddrlaw[0].ar, |
| (LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE))); |
| out_be32(&im->ddr.csbnds[0].csbnds, |
| (((msize / 16) - 1) & 0xff)); |
| } |
| |
| return msize; |
| } |
| |
| int dram_init(void) |
| { |
| immap_t *im = (immap_t *)CONFIG_SYS_IMMR; |
| u32 msize = 0; |
| |
| if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im) |
| return -ENXIO; |
| |
| out_be32(&im->sysconf.ddrlaw[0].bar, |
| CONFIG_SYS_DDR_BASE & LAWBAR_BAR); |
| msize = fixed_sdram(); |
| |
| #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) |
| /* |
| * Initialize DDR ECC byte |
| */ |
| ddr_enable_ecc(msize * 1024 * 1024); |
| #endif |
| |
| /* return total bus SDRAM size(bytes) -- DDR */ |
| gd->ram_size = msize * 1024 * 1024; |
| |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| puts("Board: Keymile " CONFIG_KM_BOARD_NAME); |
| |
| if (piggy_present()) |
| puts(" with PIGGY."); |
| puts("\n"); |
| return 0; |
| } |
| |
| int ft_board_setup(void *blob, bd_t *bd) |
| { |
| ft_cpu_setup(blob, bd); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_HUSH_INIT_VAR) |
| int hush_init_var(void) |
| { |
| ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN); |
| return 0; |
| } |
| #endif |
| |
| #if defined(CONFIG_POST) |
| int post_hotkeys_pressed(void) |
| { |
| int testpin = 0; |
| struct km_bec_fpga *base = |
| (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE; |
| int testpin_reg = in_8(&base->CONFIG_TESTPIN_REG); |
| testpin = (testpin_reg & CONFIG_TESTPIN_MASK) != 0; |
| debug("post_hotkeys_pressed: %d\n", !testpin); |
| return testpin; |
| } |
| |
| ulong post_word_load(void) |
| { |
| void* addr = (ulong *) (CPM_POST_WORD_ADDR); |
| debug("post_word_load 0x%08lX: 0x%08X\n", (ulong)addr, in_le32(addr)); |
| return in_le32(addr); |
| |
| } |
| void post_word_store(ulong value) |
| { |
| void* addr = (ulong *) (CPM_POST_WORD_ADDR); |
| debug("post_word_store 0x%08lX: 0x%08lX\n", (ulong)addr, value); |
| out_le32(addr, value); |
| } |
| |
| int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset) |
| { |
| *vstart = CONFIG_SYS_MEMTEST_START; |
| *size = CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START; |
| debug("arch_memory_test_prepare 0x%08X 0x%08X\n", *vstart, *size); |
| |
| return 0; |
| } |
| #endif |