arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c - filogic/uboot - Gitiles

 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
  * Author: Hongbo Zhang <hongbo.zhang@nxp.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  * This file implements LS102X platform PSCI SYSTEM-SUSPEND function
  */

 #include <config.h>
 #include <asm/io.h>
 #include <asm/psci.h>
 #include <asm/arch/immap_ls102xa.h>
 #include <fsl_immap.h>
 #include "fsl_epu.h"

 #define __secure __attribute__((section("._secure.text")))

 #define CCSR_GICD_CTLR			0x1000
 #define CCSR_GICC_CTLR			0x2000
 #define DCSR_RCPM_CG1CR0		0x31c
 #define DCSR_RCPM_CSTTACR0		0xb00
 #define DCFG_CRSTSR_WDRFR		0x8
 #define DDR_RESV_LEN			128

 #ifdef CONFIG_LS1_DEEP_SLEEP
 /*
  * DDR controller initialization training breaks the first 128 bytes of DDR,
  * save them so that the bootloader can restore them while resuming.
  */
 static void __secure ls1_save_ddr_head(void)
 {
 	const char *src = (const char *)CONFIG_SYS_SDRAM_BASE;
 	char *dest = (char *)(OCRAM_BASE_S_ADDR + OCRAM_S_SIZE - DDR_RESV_LEN);
 	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
 	int i;

 	out_le32(&scfg->sparecr[2], dest);

 	for (i = 0; i < DDR_RESV_LEN; i++)
 		*dest++ = *src++;
 }

 static void __secure ls1_fsm_setup(void)
 {
 	void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
 	void *dcsr_rcpm_base = (void *)SYS_FSL_DCSR_RCPM_ADDR;

 	out_be32(dcsr_rcpm_base + DCSR_RCPM_CSTTACR0, 0x00001001);
 	out_be32(dcsr_rcpm_base + DCSR_RCPM_CG1CR0, 0x00000001);

 	fsl_epu_setup((void *)dcsr_epu_base);

 	/* Pull MCKE signal low before enabling deep sleep signal in FPGA */
 	out_be32(dcsr_epu_base + EPECR0, 0x5);
 	out_be32(dcsr_epu_base + EPSMCR15, 0x76300000);
 }

 static void __secure ls1_deepsleep_irq_cfg(void)
 {
 	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
 	struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
 	u32 ippdexpcr0, ippdexpcr1, pmcintecr = 0;

 	/* Mask interrupts from GIC */
 	out_be32(&rcpm->nfiqoutr, 0x0ffffffff);
 	out_be32(&rcpm->nirqoutr, 0x0ffffffff);
 	/* Mask deep sleep wake-up interrupts while entering deep sleep */
 	out_be32(&rcpm->dsimskr, 0x0ffffffff);

 	ippdexpcr0 = in_be32(&rcpm->ippdexpcr0);
 	/*
 	 * Workaround: There is bug of register ippdexpcr1, when read it always
 	 * returns zero, so its value is saved to a scrachpad register to be
 	 * read, that is why we don't read it from register ippdexpcr1 itself.
 	 */
 	ippdexpcr1 = in_le32(&scfg->sparecr[7]);

 	if (ippdexpcr0 & RCPM_IPPDEXPCR0_ETSEC)
 		pmcintecr |= SCFG_PMCINTECR_ETSECRXG0 |
 			     SCFG_PMCINTECR_ETSECRXG1 |
 			     SCFG_PMCINTECR_ETSECERRG0 |
 			     SCFG_PMCINTECR_ETSECERRG1;

 	if (ippdexpcr0 & RCPM_IPPDEXPCR0_GPIO)
 		pmcintecr |= SCFG_PMCINTECR_GPIO;

 	if (ippdexpcr1 & RCPM_IPPDEXPCR1_LPUART)
 		pmcintecr |= SCFG_PMCINTECR_LPUART;

 	if (ippdexpcr1 & RCPM_IPPDEXPCR1_FLEXTIMER)
 		pmcintecr |= SCFG_PMCINTECR_FTM;

 	/* Always set external IRQ pins as wakeup source */
 	pmcintecr |= SCFG_PMCINTECR_IRQ0 | SCFG_PMCINTECR_IRQ1;

 	out_be32(&scfg->pmcintlecr, 0);
 	/* Clear PMC interrupt status */
 	out_be32(&scfg->pmcintsr, 0xffffffff);
 	/* Enable wakeup interrupt during deep sleep */
 	out_be32(&scfg->pmcintecr, pmcintecr);
 }

 static void __secure ls1_delay(unsigned int loop)
 {
 	while (loop--) {
 		int i = 1000;
 		while (i--)
 			;
 	}
 }

 static void __secure ls1_start_fsm(void)
 {
 	void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
 	void *ccsr_gic_base = (void *)SYS_FSL_GIC_ADDR;
 	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
 	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;

 	/* Set HRSTCR */
 	setbits_be32(&scfg->hrstcr, 0x80000000);

 	/* Place DDR controller in self refresh mode */
 	setbits_be32(&ddr->sdram_cfg_2, 0x80000000);

 	ls1_delay(2000);

 	/* Set EVT4_B to lock the signal MCKE down */
 	out_be32(dcsr_epu_base + EPECR0, 0x0);

 	ls1_delay(2000);

 	out_be32(ccsr_gic_base + CCSR_GICD_CTLR, 0x0);
 	out_be32(ccsr_gic_base + CCSR_GICC_CTLR, 0x0);

 	/* Enable all EPU Counters */
 	setbits_be32(dcsr_epu_base + EPGCR, 0x80000000);

 	/* Enable SCU15 */
 	setbits_be32(dcsr_epu_base + EPECR15, 0x90000004);

 	/* Enter WFI mode, and EPU FSM will start */
 	__asm__ __volatile__ ("wfi" : : : "memory");

 	/* NEVER ENTER HERE */
 	while (1)
 		;
 }

 static void __secure ls1_deep_sleep(u32 entry_point)
 {
 	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
 	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
 	struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
 #ifdef QIXIS_BASE
 	u32 tmp;
 	void *qixis_base = (void *)QIXIS_BASE;
 #endif

 	/* Enable cluster to enter the PCL10 state */
 	out_be32(&scfg->clusterpmcr, SCFG_CLUSTERPMCR_WFIL2EN);

 	/* Save the first 128 bytes of DDR data */
 	ls1_save_ddr_head();

 	/* Save the kernel resume entry */
 	out_le32(&scfg->sparecr[3], entry_point);

 	/* Request to put cluster 0 in PCL10 state */
 	setbits_be32(&rcpm->clpcl10setr, RCPM_CLPCL10SETR_C0);

 	/* Setup the registers of the EPU FSM for deep sleep */
 	ls1_fsm_setup();

 #ifdef QIXIS_BASE
 	/* Connect the EVENT button to IRQ in FPGA */
 	tmp = in_8(qixis_base + QIXIS_CTL_SYS);
 	tmp &= ~QIXIS_CTL_SYS_EVTSW_MASK;
 	tmp |= QIXIS_CTL_SYS_EVTSW_IRQ;
 	out_8(qixis_base + QIXIS_CTL_SYS, tmp);

 	/* Enable deep sleep signals in FPGA */
 	tmp = in_8(qixis_base + QIXIS_PWR_CTL2);
 	tmp |= QIXIS_PWR_CTL2_PCTL;
 	out_8(qixis_base + QIXIS_PWR_CTL2, tmp);

 	/* Pull down PCIe RST# */
 	tmp = in_8(qixis_base + QIXIS_RST_FORCE_3);
 	tmp |= QIXIS_RST_FORCE_3_PCIESLOT1;
 	out_8(qixis_base + QIXIS_RST_FORCE_3, tmp);
 #endif

 	/* Enable Warm Device Reset */
 	setbits_be32(&scfg->dpslpcr, SCFG_DPSLPCR_WDRR_EN);
 	setbits_be32(&gur->crstsr, DCFG_CRSTSR_WDRFR);

 	ls1_deepsleep_irq_cfg();

 	psci_v7_flush_dcache_all();

 	ls1_start_fsm();
 }

 #else
 static void __secure ls1_sleep(void)
 {
 	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
 	struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;

 #ifdef QIXIS_BASE
 	u32 tmp;
 	void *qixis_base = (void *)QIXIS_BASE;

 	/* Connect the EVENT button to IRQ in FPGA */
 	tmp = in_8(qixis_base + QIXIS_CTL_SYS);
 	tmp &= ~QIXIS_CTL_SYS_EVTSW_MASK;
 	tmp |= QIXIS_CTL_SYS_EVTSW_IRQ;
 	out_8(qixis_base + QIXIS_CTL_SYS, tmp);
 #endif

 	/* Enable cluster to enter the PCL10 state */
 	out_be32(&scfg->clusterpmcr, SCFG_CLUSTERPMCR_WFIL2EN);

 	setbits_be32(&rcpm->powmgtcsr, RCPM_POWMGTCSR_LPM20_REQ);

 	__asm__ __volatile__ ("wfi" : : : "memory");
 }
 #endif

 void __secure ls1_system_suspend(u32 fn, u32 entry_point, u32 context_id)
 {
 #ifdef CONFIG_LS1_DEEP_SLEEP
 	ls1_deep_sleep(entry_point);
 #else
 	ls1_sleep();
 #endif
 }
	/*
	* Copyright 2016 Freescale Semiconductor, Inc.
	* Author: Hongbo Zhang <hongbo.zhang@nxp.com>
	*
	* SPDX-License-Identifier: GPL-2.0+
	* This file implements LS102X platform PSCI SYSTEM-SUSPEND function
	*/

	#include <config.h>
	#include <asm/io.h>
	#include <asm/psci.h>
	#include <asm/arch/immap_ls102xa.h>
	#include <fsl_immap.h>
	#include "fsl_epu.h"

	#define __secure __attribute__((section("._secure.text")))

	#define CCSR_GICD_CTLR 0x1000
	#define CCSR_GICC_CTLR 0x2000
	#define DCSR_RCPM_CG1CR0 0x31c
	#define DCSR_RCPM_CSTTACR0 0xb00
	#define DCFG_CRSTSR_WDRFR 0x8
	#define DDR_RESV_LEN 128

	#ifdef CONFIG_LS1_DEEP_SLEEP
	/*
	* DDR controller initialization training breaks the first 128 bytes of DDR,
	* save them so that the bootloader can restore them while resuming.
	*/
	static void __secure ls1_save_ddr_head(void)
	{
	const char src = (const char )CONFIG_SYS_SDRAM_BASE;
	char dest = (char )(OCRAM_BASE_S_ADDR + OCRAM_S_SIZE - DDR_RESV_LEN);
	struct ccsr_scfg __iomem scfg = (void )CONFIG_SYS_FSL_SCFG_ADDR;
	int i;

	out_le32(&scfg->sparecr[2], dest);

	for (i = 0; i < DDR_RESV_LEN; i++)
	dest++ = src++;
	}

	static void __secure ls1_fsm_setup(void)
	{
	void dcsr_epu_base = (void )(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
	void dcsr_rcpm_base = (void )SYS_FSL_DCSR_RCPM_ADDR;

	out_be32(dcsr_rcpm_base + DCSR_RCPM_CSTTACR0, 0x00001001);
	out_be32(dcsr_rcpm_base + DCSR_RCPM_CG1CR0, 0x00000001);

	fsl_epu_setup((void *)dcsr_epu_base);

	/* Pull MCKE signal low before enabling deep sleep signal in FPGA */
	out_be32(dcsr_epu_base + EPECR0, 0x5);
	out_be32(dcsr_epu_base + EPSMCR15, 0x76300000);
	}

	static void __secure ls1_deepsleep_irq_cfg(void)
	{
	struct ccsr_scfg __iomem scfg = (void )CONFIG_SYS_FSL_SCFG_ADDR;
	struct ccsr_rcpm __iomem rcpm = (void )CONFIG_SYS_FSL_RCPM_ADDR;
	u32 ippdexpcr0, ippdexpcr1, pmcintecr = 0;

	/* Mask interrupts from GIC */
	out_be32(&rcpm->nfiqoutr, 0x0ffffffff);
	out_be32(&rcpm->nirqoutr, 0x0ffffffff);
	/* Mask deep sleep wake-up interrupts while entering deep sleep */
	out_be32(&rcpm->dsimskr, 0x0ffffffff);

	ippdexpcr0 = in_be32(&rcpm->ippdexpcr0);
	/*
	* Workaround: There is bug of register ippdexpcr1, when read it always
	* returns zero, so its value is saved to a scrachpad register to be
	* read, that is why we don't read it from register ippdexpcr1 itself.
	*/
	ippdexpcr1 = in_le32(&scfg->sparecr[7]);

	if (ippdexpcr0 & RCPM_IPPDEXPCR0_ETSEC)
	pmcintecr \|= SCFG_PMCINTECR_ETSECRXG0 \|
	SCFG_PMCINTECR_ETSECRXG1 \|
	SCFG_PMCINTECR_ETSECERRG0 \|
	SCFG_PMCINTECR_ETSECERRG1;

	if (ippdexpcr0 & RCPM_IPPDEXPCR0_GPIO)
	pmcintecr \|= SCFG_PMCINTECR_GPIO;

	if (ippdexpcr1 & RCPM_IPPDEXPCR1_LPUART)
	pmcintecr \|= SCFG_PMCINTECR_LPUART;

	if (ippdexpcr1 & RCPM_IPPDEXPCR1_FLEXTIMER)
	pmcintecr \|= SCFG_PMCINTECR_FTM;

	/* Always set external IRQ pins as wakeup source */
	pmcintecr \|= SCFG_PMCINTECR_IRQ0 \| SCFG_PMCINTECR_IRQ1;

	out_be32(&scfg->pmcintlecr, 0);
	/* Clear PMC interrupt status */
	out_be32(&scfg->pmcintsr, 0xffffffff);
	/* Enable wakeup interrupt during deep sleep */
	out_be32(&scfg->pmcintecr, pmcintecr);
	}

	static void __secure ls1_delay(unsigned int loop)
	{
	while (loop--) {
	int i = 1000;
	while (i--)
	;
	}
	}

	static void __secure ls1_start_fsm(void)
	{
	void dcsr_epu_base = (void )(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
	void ccsr_gic_base = (void )SYS_FSL_GIC_ADDR;
	struct ccsr_scfg __iomem scfg = (void )CONFIG_SYS_FSL_SCFG_ADDR;
	struct ccsr_ddr __iomem ddr = (void )CONFIG_SYS_FSL_DDR_ADDR;

	/* Set HRSTCR */
	setbits_be32(&scfg->hrstcr, 0x80000000);

	/* Place DDR controller in self refresh mode */
	setbits_be32(&ddr->sdram_cfg_2, 0x80000000);

	ls1_delay(2000);

	/* Set EVT4_B to lock the signal MCKE down */
	out_be32(dcsr_epu_base + EPECR0, 0x0);

	ls1_delay(2000);

	out_be32(ccsr_gic_base + CCSR_GICD_CTLR, 0x0);
	out_be32(ccsr_gic_base + CCSR_GICC_CTLR, 0x0);

	/* Enable all EPU Counters */
	setbits_be32(dcsr_epu_base + EPGCR, 0x80000000);

	/* Enable SCU15 */
	setbits_be32(dcsr_epu_base + EPECR15, 0x90000004);

	/* Enter WFI mode, and EPU FSM will start */
	__asm__ __volatile__ ("wfi" : : : "memory");

	/* NEVER ENTER HERE */
	while (1)
	;
	}

	static void __secure ls1_deep_sleep(u32 entry_point)
	{
	struct ccsr_scfg __iomem scfg = (void )CONFIG_SYS_FSL_SCFG_ADDR;
	struct ccsr_gur __iomem gur = (void )CONFIG_SYS_FSL_GUTS_ADDR;
	struct ccsr_rcpm __iomem rcpm = (void )CONFIG_SYS_FSL_RCPM_ADDR;
	#ifdef QIXIS_BASE
	u32 tmp;
	void qixis_base = (void )QIXIS_BASE;
	#endif

	/* Enable cluster to enter the PCL10 state */
	out_be32(&scfg->clusterpmcr, SCFG_CLUSTERPMCR_WFIL2EN);

	/* Save the first 128 bytes of DDR data */
	ls1_save_ddr_head();

	/* Save the kernel resume entry */
	out_le32(&scfg->sparecr[3], entry_point);

	/* Request to put cluster 0 in PCL10 state */
	setbits_be32(&rcpm->clpcl10setr, RCPM_CLPCL10SETR_C0);

	/* Setup the registers of the EPU FSM for deep sleep */
	ls1_fsm_setup();

	#ifdef QIXIS_BASE
	/* Connect the EVENT button to IRQ in FPGA */
	tmp = in_8(qixis_base + QIXIS_CTL_SYS);
	tmp &= ~QIXIS_CTL_SYS_EVTSW_MASK;
	tmp \|= QIXIS_CTL_SYS_EVTSW_IRQ;
	out_8(qixis_base + QIXIS_CTL_SYS, tmp);

	/* Enable deep sleep signals in FPGA */
	tmp = in_8(qixis_base + QIXIS_PWR_CTL2);
	tmp \|= QIXIS_PWR_CTL2_PCTL;
	out_8(qixis_base + QIXIS_PWR_CTL2, tmp);

	/* Pull down PCIe RST# */
	tmp = in_8(qixis_base + QIXIS_RST_FORCE_3);
	tmp \|= QIXIS_RST_FORCE_3_PCIESLOT1;
	out_8(qixis_base + QIXIS_RST_FORCE_3, tmp);
	#endif

	/* Enable Warm Device Reset */
	setbits_be32(&scfg->dpslpcr, SCFG_DPSLPCR_WDRR_EN);
	setbits_be32(&gur->crstsr, DCFG_CRSTSR_WDRFR);

	ls1_deepsleep_irq_cfg();

	psci_v7_flush_dcache_all();

	ls1_start_fsm();
	}

	#else
	static void __secure ls1_sleep(void)
	{
	struct ccsr_scfg __iomem scfg = (void )CONFIG_SYS_FSL_SCFG_ADDR;
	struct ccsr_rcpm __iomem rcpm = (void )CONFIG_SYS_FSL_RCPM_ADDR;

	#ifdef QIXIS_BASE
	u32 tmp;
	void qixis_base = (void )QIXIS_BASE;

	/* Connect the EVENT button to IRQ in FPGA */
	tmp = in_8(qixis_base + QIXIS_CTL_SYS);
	tmp &= ~QIXIS_CTL_SYS_EVTSW_MASK;
	tmp \|= QIXIS_CTL_SYS_EVTSW_IRQ;
	out_8(qixis_base + QIXIS_CTL_SYS, tmp);
	#endif

	/* Enable cluster to enter the PCL10 state */
	out_be32(&scfg->clusterpmcr, SCFG_CLUSTERPMCR_WFIL2EN);

	setbits_be32(&rcpm->powmgtcsr, RCPM_POWMGTCSR_LPM20_REQ);

	__asm__ __volatile__ ("wfi" : : : "memory");
	}
	#endif

	void __secure ls1_system_suspend(u32 fn, u32 entry_point, u32 context_id)
	{
	#ifdef CONFIG_LS1_DEEP_SLEEP
	ls1_deep_sleep(entry_point);
	#else
	ls1_sleep();
	#endif
	}