arch/arm/cpu/arm926ejs/mxs/clock.c - filogic/uboot - Gitiles

 /*
  * Freescale i.MX23/i.MX28 clock setup code
  *
  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
  * on behalf of DENX Software Engineering GmbH
  *
  * Based on code from LTIB:
  * Copyright (C) 2010 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <linux/errno.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>

 /*
  * The PLL frequency is 480MHz and XTAL frequency is 24MHz
  *   iMX23: datasheet section 4.2
  *   iMX28: datasheet section 10.2
  */
 #define	PLL_FREQ_KHZ	480000
 #define	PLL_FREQ_COEF	18
 #define	XTAL_FREQ_KHZ	24000

 #define	PLL_FREQ_MHZ	(PLL_FREQ_KHZ / 1000)
 #define	XTAL_FREQ_MHZ	(XTAL_FREQ_KHZ / 1000)

 #if defined(CONFIG_MX23)
 #define MXC_SSPCLK_MAX MXC_SSPCLK0
 #elif defined(CONFIG_MX28)
 #define MXC_SSPCLK_MAX MXC_SSPCLK3
 #endif

 static uint32_t mxs_get_pclk(void)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;

 	uint32_t clkctrl, clkseq, div;
 	uint8_t clkfrac, frac;

 	clkctrl = readl(&clkctrl_regs->hw_clkctrl_cpu);

 	/* No support of fractional divider calculation */
 	if (clkctrl &
 		(CLKCTRL_CPU_DIV_XTAL_FRAC_EN | CLKCTRL_CPU_DIV_CPU_FRAC_EN)) {
 		return 0;
 	}

 	clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);

 	/* XTAL Path */
 	if (clkseq & CLKCTRL_CLKSEQ_BYPASS_CPU) {
 		div = (clkctrl & CLKCTRL_CPU_DIV_XTAL_MASK) >>
 			CLKCTRL_CPU_DIV_XTAL_OFFSET;
 		return XTAL_FREQ_MHZ / div;
 	}

 	/* REF Path */
 	clkfrac = readb(&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU]);
 	frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK;
 	div = clkctrl & CLKCTRL_CPU_DIV_CPU_MASK;
 	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
 }

 static uint32_t mxs_get_hclk(void)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;

 	uint32_t div;
 	uint32_t clkctrl;

 	clkctrl = readl(&clkctrl_regs->hw_clkctrl_hbus);

 	/* No support of fractional divider calculation */
 	if (clkctrl & CLKCTRL_HBUS_DIV_FRAC_EN)
 		return 0;

 	div = clkctrl & CLKCTRL_HBUS_DIV_MASK;
 	return mxs_get_pclk() / div;
 }

 static uint32_t mxs_get_emiclk(void)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;

 	uint32_t clkctrl, clkseq, div;
 	uint8_t clkfrac, frac;

 	clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
 	clkctrl = readl(&clkctrl_regs->hw_clkctrl_emi);

 	/* XTAL Path */
 	if (clkseq & CLKCTRL_CLKSEQ_BYPASS_EMI) {
 		div = (clkctrl & CLKCTRL_EMI_DIV_XTAL_MASK) >>
 			CLKCTRL_EMI_DIV_XTAL_OFFSET;
 		return XTAL_FREQ_MHZ / div;
 	}

 	/* REF Path */
 	clkfrac = readb(&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_EMI]);
 	frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK;
 	div = clkctrl & CLKCTRL_EMI_DIV_EMI_MASK;
 	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
 }

 static uint32_t mxs_get_gpmiclk(void)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
 #if defined(CONFIG_MX23)
 	uint8_t *reg =
 		&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU];
 #elif defined(CONFIG_MX28)
 	uint8_t *reg =
 		&clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_GPMI];
 #endif
 	uint32_t clkctrl, clkseq, div;
 	uint8_t clkfrac, frac;

 	clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
 	clkctrl = readl(&clkctrl_regs->hw_clkctrl_gpmi);

 	/* XTAL Path */
 	if (clkseq & CLKCTRL_CLKSEQ_BYPASS_GPMI) {
 		div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
 		return XTAL_FREQ_MHZ / div;
 	}

 	/* REF Path */
 	clkfrac = readb(reg);
 	frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK;
 	div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
 	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
 }

 /*
  * Set IO clock frequency, in kHz
  */
 void mxs_set_ioclk(enum mxs_ioclock io, uint32_t freq)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
 	uint32_t div;
 	int io_reg;

 	if (freq == 0)
 		return;

 	if ((io < MXC_IOCLK0) || (io > MXC_IOCLK1))
 		return;

 	div = (PLL_FREQ_KHZ * PLL_FREQ_COEF) / freq;

 	if (div < 18)
 		div = 18;

 	if (div > 35)
 		div = 35;

 	io_reg = CLKCTRL_FRAC0_IO0 - io;	/* Register order is reversed */
 	writeb(CLKCTRL_FRAC_CLKGATE,
 		&clkctrl_regs->hw_clkctrl_frac0_set[io_reg]);
 	writeb(CLKCTRL_FRAC_CLKGATE | (div & CLKCTRL_FRAC_FRAC_MASK),
 		&clkctrl_regs->hw_clkctrl_frac0[io_reg]);
 	writeb(CLKCTRL_FRAC_CLKGATE,
 		&clkctrl_regs->hw_clkctrl_frac0_clr[io_reg]);
 }

 /*
  * Get IO clock, returns IO clock in kHz
  */
 static uint32_t mxs_get_ioclk(enum mxs_ioclock io)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
 	uint8_t ret;
 	int io_reg;

 	if ((io < MXC_IOCLK0) || (io > MXC_IOCLK1))
 		return 0;

 	io_reg = CLKCTRL_FRAC0_IO0 - io;	/* Register order is reversed */

 	ret = readb(&clkctrl_regs->hw_clkctrl_frac0[io_reg]) &
 		CLKCTRL_FRAC_FRAC_MASK;

 	return (PLL_FREQ_KHZ * PLL_FREQ_COEF) / ret;
 }

 /*
  * Configure SSP clock frequency, in kHz
  */
 void mxs_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
 	uint32_t clk, clkreg;

 	if (ssp > MXC_SSPCLK_MAX)
 		return;

 	clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
 			(ssp * sizeof(struct mxs_register_32));

 	clrbits_le32(clkreg, CLKCTRL_SSP_CLKGATE);
 	while (readl(clkreg) & CLKCTRL_SSP_CLKGATE)
 		;

 	if (xtal)
 		clk = XTAL_FREQ_KHZ;
 	else
 		clk = mxs_get_ioclk(ssp >> 1);

 	if (freq > clk)
 		return;

 	/* Calculate the divider and cap it if necessary */
 	clk /= freq;
 	if (clk > CLKCTRL_SSP_DIV_MASK)
 		clk = CLKCTRL_SSP_DIV_MASK;

 	clrsetbits_le32(clkreg, CLKCTRL_SSP_DIV_MASK, clk);
 	while (readl(clkreg) & CLKCTRL_SSP_BUSY)
 		;

 	if (xtal)
 		writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp,
 			&clkctrl_regs->hw_clkctrl_clkseq_set);
 	else
 		writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp,
 			&clkctrl_regs->hw_clkctrl_clkseq_clr);
 }

 /*
  * Return SSP frequency, in kHz
  */
 static uint32_t mxs_get_sspclk(enum mxs_sspclock ssp)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
 	uint32_t clkreg;
 	uint32_t clk, tmp;

 	if (ssp > MXC_SSPCLK_MAX)
 		return 0;

 	tmp = readl(&clkctrl_regs->hw_clkctrl_clkseq);
 	if (tmp & (CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp))
 		return XTAL_FREQ_KHZ;

 	clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
 			(ssp * sizeof(struct mxs_register_32));

 	tmp = readl(clkreg) & CLKCTRL_SSP_DIV_MASK;

 	if (tmp == 0)
 		return 0;

 	clk = mxs_get_ioclk(ssp >> 1);

 	return clk / tmp;
 }

 /*
  * Set SSP/MMC bus frequency, in kHz)
  */
 void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq)
 {
 	struct mxs_ssp_regs *ssp_regs;
 	const enum mxs_sspclock clk = mxs_ssp_clock_by_bus(bus);
 	const uint32_t sspclk = mxs_get_sspclk(clk);
 	uint32_t reg;
 	uint32_t divide, rate, tgtclk;

 	ssp_regs = mxs_ssp_regs_by_bus(bus);

 	/*
 	 * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
 	 * CLOCK_DIVIDE has to be an even value from 2 to 254, and
 	 * CLOCK_RATE could be any integer from 0 to 255.
 	 */
 	for (divide = 2; divide < 254; divide += 2) {
 		rate = sspclk / freq / divide;
 		if (rate <= 256)
 			break;
 	}

 	tgtclk = sspclk / divide / rate;
 	while (tgtclk > freq) {
 		rate++;
 		tgtclk = sspclk / divide / rate;
 	}
 	if (rate > 256)
 		rate = 256;

 	/* Always set timeout the maximum */
 	reg = SSP_TIMING_TIMEOUT_MASK |
 		(divide << SSP_TIMING_CLOCK_DIVIDE_OFFSET) |
 		((rate - 1) << SSP_TIMING_CLOCK_RATE_OFFSET);
 	writel(reg, &ssp_regs->hw_ssp_timing);

 	debug("SPI%d: Set freq rate to %d KHz (requested %d KHz)\n",
 		bus, tgtclk, freq);
 }

 void mxs_set_lcdclk(uint32_t __maybe_unused lcd_base, uint32_t freq)
 {
 	struct mxs_clkctrl_regs *clkctrl_regs =
 		(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
 	uint32_t fp, x, k_rest, k_best, x_best, tk;
 	int32_t k_best_l = 999, k_best_t = 0, x_best_l = 0xff, x_best_t = 0xff;

 	if (freq == 0)
 		return;

 #if defined(CONFIG_MX23)
 	writel(CLKCTRL_CLKSEQ_BYPASS_PIX, &clkctrl_regs->hw_clkctrl_clkseq_clr);
 #elif defined(CONFIG_MX28)
 	writel(CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF, &clkctrl_regs->hw_clkctrl_clkseq_clr);
 #endif

 	/*
 	 *             /               18 \     1       1
 	 * freq kHz = | 480000000 Hz * --  | * --- * ------
 	 *             \                x /     k     1000
 	 *
 	 *      480000000 Hz   18
 	 *      ------------ * --
 	 *        freq kHz      x
 	 * k = -------------------
 	 *             1000
 	 */

 	fp = ((PLL_FREQ_KHZ * 1000) / freq) * 18;

 	for (x = 18; x <= 35; x++) {
 		tk = fp / x;
 		if ((tk / 1000 == 0) || (tk / 1000 > 255))
 			continue;

 		k_rest = tk % 1000;

 		if (k_rest < (k_best_l % 1000)) {
 			k_best_l = tk;
 			x_best_l = x;
 		}

 		if (k_rest > (k_best_t % 1000)) {
 			k_best_t = tk;
 			x_best_t = x;
 		}
 	}

 	if (1000 - (k_best_t % 1000) > (k_best_l % 1000)) {
 		k_best = k_best_l;
 		x_best = x_best_l;
 	} else {
 		k_best = k_best_t;
 		x_best = x_best_t;
 	}

 	k_best /= 1000;

 #if defined(CONFIG_MX23)
 	writeb(CLKCTRL_FRAC_CLKGATE,
 		&clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_PIX]);
 	writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK),
 		&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_PIX]);
 	writeb(CLKCTRL_FRAC_CLKGATE,
 		&clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_PIX]);

 	writel(CLKCTRL_PIX_CLKGATE,
 		&clkctrl_regs->hw_clkctrl_pix_set);
 	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_pix,
 			CLKCTRL_PIX_DIV_MASK | CLKCTRL_PIX_CLKGATE,
 			k_best << CLKCTRL_PIX_DIV_OFFSET);

 	while (readl(&clkctrl_regs->hw_clkctrl_pix) & CLKCTRL_PIX_BUSY)
 		;
 #elif defined(CONFIG_MX28)
 	writeb(CLKCTRL_FRAC_CLKGATE,
 		&clkctrl_regs->hw_clkctrl_frac1_set[CLKCTRL_FRAC1_PIX]);
 	writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK),
 		&clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_PIX]);
 	writeb(CLKCTRL_FRAC_CLKGATE,
 		&clkctrl_regs->hw_clkctrl_frac1_clr[CLKCTRL_FRAC1_PIX]);

 	writel(CLKCTRL_DIS_LCDIF_CLKGATE,
 		&clkctrl_regs->hw_clkctrl_lcdif_set);
 	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_lcdif,
 			CLKCTRL_DIS_LCDIF_DIV_MASK | CLKCTRL_DIS_LCDIF_CLKGATE,
 			k_best << CLKCTRL_DIS_LCDIF_DIV_OFFSET);

 	while (readl(&clkctrl_regs->hw_clkctrl_lcdif) & CLKCTRL_DIS_LCDIF_BUSY)
 		;
 #endif
 }

 uint32_t mxc_get_clock(enum mxc_clock clk)
 {
 	switch (clk) {
 	case MXC_ARM_CLK:
 		return mxs_get_pclk() * 1000000;
 	case MXC_GPMI_CLK:
 		return mxs_get_gpmiclk() * 1000000;
 	case MXC_AHB_CLK:
 	case MXC_IPG_CLK:
 		return mxs_get_hclk() * 1000000;
 	case MXC_EMI_CLK:
 		return mxs_get_emiclk();
 	case MXC_IO0_CLK:
 		return mxs_get_ioclk(MXC_IOCLK0);
 	case MXC_IO1_CLK:
 		return mxs_get_ioclk(MXC_IOCLK1);
 	case MXC_XTAL_CLK:
 		return XTAL_FREQ_KHZ * 1000;
 	case MXC_SSP0_CLK:
 		return mxs_get_sspclk(MXC_SSPCLK0);
 #ifdef CONFIG_MX28
 	case MXC_SSP1_CLK:
 		return mxs_get_sspclk(MXC_SSPCLK1);
 	case MXC_SSP2_CLK:
 		return mxs_get_sspclk(MXC_SSPCLK2);
 	case MXC_SSP3_CLK:
 		return mxs_get_sspclk(MXC_SSPCLK3);
 #endif
 	}

 	return 0;
 }
	/*
	* Freescale i.MX23/i.MX28 clock setup code
	*
	* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
	* on behalf of DENX Software Engineering GmbH
	*
	* Based on code from LTIB:
	* Copyright (C) 2010 Freescale Semiconductor, Inc.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <linux/errno.h>
	#include <asm/io.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/imx-regs.h>

	/*
	* The PLL frequency is 480MHz and XTAL frequency is 24MHz
	* iMX23: datasheet section 4.2
	* iMX28: datasheet section 10.2
	*/
	#define PLL_FREQ_KHZ 480000
	#define PLL_FREQ_COEF 18
	#define XTAL_FREQ_KHZ 24000

	#define PLL_FREQ_MHZ (PLL_FREQ_KHZ / 1000)
	#define XTAL_FREQ_MHZ (XTAL_FREQ_KHZ / 1000)

	#if defined(CONFIG_MX23)
	#define MXC_SSPCLK_MAX MXC_SSPCLK0
	#elif defined(CONFIG_MX28)
	#define MXC_SSPCLK_MAX MXC_SSPCLK3
	#endif

	static uint32_t mxs_get_pclk(void)
	{
	struct mxs_clkctrl_regs *clkctrl_regs =
	(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;

	uint32_t clkctrl, clkseq, div;
	uint8_t clkfrac, frac;

	clkctrl = readl(&clkctrl_regs->hw_clkctrl_cpu);

	/* No support of fractional divider calculation */
	if (clkctrl &
	(CLKCTRL_CPU_DIV_XTAL_FRAC_EN \| CLKCTRL_CPU_DIV_CPU_FRAC_EN)) {
	return 0;
	}

	clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);

	/* XTAL Path */
	if (clkseq & CLKCTRL_CLKSEQ_BYPASS_CPU) {
	div = (clkctrl & CLKCTRL_CPU_DIV_XTAL_MASK) >>
	CLKCTRL_CPU_DIV_XTAL_OFFSET;
	return XTAL_FREQ_MHZ / div;
	}

	/* REF Path */
	clkfrac = readb(&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU]);
	frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK;
	div = clkctrl & CLKCTRL_CPU_DIV_CPU_MASK;
	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
	}

	static uint32_t mxs_get_hclk(void)
	{
	struct mxs_clkctrl_regs *clkctrl_regs =
	(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;

	uint32_t div;
	uint32_t clkctrl;

	clkctrl = readl(&clkctrl_regs->hw_clkctrl_hbus);

	/* No support of fractional divider calculation */
	if (clkctrl & CLKCTRL_HBUS_DIV_FRAC_EN)
	return 0;

	div = clkctrl & CLKCTRL_HBUS_DIV_MASK;
	return mxs_get_pclk() / div;
	}

	static uint32_t mxs_get_emiclk(void)
	{
	struct mxs_clkctrl_regs *clkctrl_regs =
	(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;

	uint32_t clkctrl, clkseq, div;
	uint8_t clkfrac, frac;

	clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
	clkctrl = readl(&clkctrl_regs->hw_clkctrl_emi);

	/* XTAL Path */
	if (clkseq & CLKCTRL_CLKSEQ_BYPASS_EMI) {
	div = (clkctrl & CLKCTRL_EMI_DIV_XTAL_MASK) >>
	CLKCTRL_EMI_DIV_XTAL_OFFSET;
	return XTAL_FREQ_MHZ / div;
	}

	/* REF Path */
	clkfrac = readb(&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_EMI]);
	frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK;
	div = clkctrl & CLKCTRL_EMI_DIV_EMI_MASK;
	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
	}

	static uint32_t mxs_get_gpmiclk(void)
	{
	struct mxs_clkctrl_regs *clkctrl_regs =
	(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
	#if defined(CONFIG_MX23)
	uint8_t *reg =
	&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU];
	#elif defined(CONFIG_MX28)
	uint8_t *reg =
	&clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_GPMI];
	#endif
	uint32_t clkctrl, clkseq, div;
	uint8_t clkfrac, frac;

	clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
	clkctrl = readl(&clkctrl_regs->hw_clkctrl_gpmi);

	/* XTAL Path */
	if (clkseq & CLKCTRL_CLKSEQ_BYPASS_GPMI) {
	div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
	return XTAL_FREQ_MHZ / div;
	}

	/* REF Path */
	clkfrac = readb(reg);
	frac = clkfrac & CLKCTRL_FRAC_FRAC_MASK;
	div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
	return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
	}

	/*
	* Set IO clock frequency, in kHz
	*/
	void mxs_set_ioclk(enum mxs_ioclock io, uint32_t freq)
	{
	struct mxs_clkctrl_regs *clkctrl_regs =
	(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
	uint32_t div;
	int io_reg;

	if (freq == 0)
	return;

	if ((io < MXC_IOCLK0) \|\| (io > MXC_IOCLK1))
	return;

	div = (PLL_FREQ_KHZ * PLL_FREQ_COEF) / freq;

	if (div < 18)
	div = 18;

	if (div > 35)
	div = 35;

	io_reg = CLKCTRL_FRAC0_IO0 - io; /* Register order is reversed */
	writeb(CLKCTRL_FRAC_CLKGATE,
	&clkctrl_regs->hw_clkctrl_frac0_set[io_reg]);
	writeb(CLKCTRL_FRAC_CLKGATE \| (div & CLKCTRL_FRAC_FRAC_MASK),
	&clkctrl_regs->hw_clkctrl_frac0[io_reg]);
	writeb(CLKCTRL_FRAC_CLKGATE,
	&clkctrl_regs->hw_clkctrl_frac0_clr[io_reg]);
	}

	/*
	* Get IO clock, returns IO clock in kHz
	*/
	static uint32_t mxs_get_ioclk(enum mxs_ioclock io)
	{
	struct mxs_clkctrl_regs *clkctrl_regs =
	(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
	uint8_t ret;
	int io_reg;

	if ((io < MXC_IOCLK0) \|\| (io > MXC_IOCLK1))
	return 0;

	io_reg = CLKCTRL_FRAC0_IO0 - io; /* Register order is reversed */

	ret = readb(&clkctrl_regs->hw_clkctrl_frac0[io_reg]) &
	CLKCTRL_FRAC_FRAC_MASK;

	return (PLL_FREQ_KHZ * PLL_FREQ_COEF) / ret;
	}

	/*
	* Configure SSP clock frequency, in kHz
	*/
	void mxs_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal)
	{
	struct mxs_clkctrl_regs *clkctrl_regs =
	(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
	uint32_t clk, clkreg;

	if (ssp > MXC_SSPCLK_MAX)
	return;

	clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
	(ssp * sizeof(struct mxs_register_32));

	clrbits_le32(clkreg, CLKCTRL_SSP_CLKGATE);
	while (readl(clkreg) & CLKCTRL_SSP_CLKGATE)
	;

	if (xtal)
	clk = XTAL_FREQ_KHZ;
	else
	clk = mxs_get_ioclk(ssp >> 1);

	if (freq > clk)
	return;

	/* Calculate the divider and cap it if necessary */
	clk /= freq;
	if (clk > CLKCTRL_SSP_DIV_MASK)
	clk = CLKCTRL_SSP_DIV_MASK;

	clrsetbits_le32(clkreg, CLKCTRL_SSP_DIV_MASK, clk);
	while (readl(clkreg) & CLKCTRL_SSP_BUSY)
	;

	if (xtal)
	writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp,
	&clkctrl_regs->hw_clkctrl_clkseq_set);
	else
	writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp,
	&clkctrl_regs->hw_clkctrl_clkseq_clr);
	}

	/*
	* Return SSP frequency, in kHz
	*/
	static uint32_t mxs_get_sspclk(enum mxs_sspclock ssp)
	{
	struct mxs_clkctrl_regs *clkctrl_regs =
	(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
	uint32_t clkreg;
	uint32_t clk, tmp;

	if (ssp > MXC_SSPCLK_MAX)
	return 0;

	tmp = readl(&clkctrl_regs->hw_clkctrl_clkseq);
	if (tmp & (CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp))
	return XTAL_FREQ_KHZ;

	clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
	(ssp * sizeof(struct mxs_register_32));

	tmp = readl(clkreg) & CLKCTRL_SSP_DIV_MASK;

	if (tmp == 0)
	return 0;

	clk = mxs_get_ioclk(ssp >> 1);

	return clk / tmp;
	}

	/*
	* Set SSP/MMC bus frequency, in kHz)
	*/
	void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq)
	{
	struct mxs_ssp_regs *ssp_regs;
	const enum mxs_sspclock clk = mxs_ssp_clock_by_bus(bus);
	const uint32_t sspclk = mxs_get_sspclk(clk);
	uint32_t reg;
	uint32_t divide, rate, tgtclk;

	ssp_regs = mxs_ssp_regs_by_bus(bus);

	/*
	* SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
	* CLOCK_DIVIDE has to be an even value from 2 to 254, and
	* CLOCK_RATE could be any integer from 0 to 255.
	*/
	for (divide = 2; divide < 254; divide += 2) {
	rate = sspclk / freq / divide;
	if (rate <= 256)
	break;
	}

	tgtclk = sspclk / divide / rate;
	while (tgtclk > freq) {
	rate++;
	tgtclk = sspclk / divide / rate;
	}
	if (rate > 256)
	rate = 256;

	/* Always set timeout the maximum */
	reg = SSP_TIMING_TIMEOUT_MASK \|
	(divide << SSP_TIMING_CLOCK_DIVIDE_OFFSET) \|
	((rate - 1) << SSP_TIMING_CLOCK_RATE_OFFSET);
	writel(reg, &ssp_regs->hw_ssp_timing);

	debug("SPI%d: Set freq rate to %d KHz (requested %d KHz)\n",
	bus, tgtclk, freq);
	}

	void mxs_set_lcdclk(uint32_t __maybe_unused lcd_base, uint32_t freq)
	{
	struct mxs_clkctrl_regs *clkctrl_regs =
	(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
	uint32_t fp, x, k_rest, k_best, x_best, tk;
	int32_t k_best_l = 999, k_best_t = 0, x_best_l = 0xff, x_best_t = 0xff;

	if (freq == 0)
	return;

	#if defined(CONFIG_MX23)
	writel(CLKCTRL_CLKSEQ_BYPASS_PIX, &clkctrl_regs->hw_clkctrl_clkseq_clr);
	#elif defined(CONFIG_MX28)
	writel(CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF, &clkctrl_regs->hw_clkctrl_clkseq_clr);
	#endif

	/*
	* / 18 \ 1 1
	* freq kHz = \| 480000000 Hz * -- \| * --- * ------
	* \ x / k 1000
	*
	* 480000000 Hz 18
	* ------------ * --
	* freq kHz x
	* k = -------------------
	* 1000
	*/

	fp = ((PLL_FREQ_KHZ * 1000) / freq) * 18;

	for (x = 18; x <= 35; x++) {
	tk = fp / x;
	if ((tk / 1000 == 0) \|\| (tk / 1000 > 255))
	continue;

	k_rest = tk % 1000;

	if (k_rest < (k_best_l % 1000)) {
	k_best_l = tk;
	x_best_l = x;
	}

	if (k_rest > (k_best_t % 1000)) {
	k_best_t = tk;
	x_best_t = x;
	}
	}

	if (1000 - (k_best_t % 1000) > (k_best_l % 1000)) {
	k_best = k_best_l;
	x_best = x_best_l;
	} else {
	k_best = k_best_t;
	x_best = x_best_t;
	}

	k_best /= 1000;

	#if defined(CONFIG_MX23)
	writeb(CLKCTRL_FRAC_CLKGATE,
	&clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_PIX]);
	writeb(CLKCTRL_FRAC_CLKGATE \| (x_best & CLKCTRL_FRAC_FRAC_MASK),
	&clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_PIX]);
	writeb(CLKCTRL_FRAC_CLKGATE,
	&clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_PIX]);

	writel(CLKCTRL_PIX_CLKGATE,
	&clkctrl_regs->hw_clkctrl_pix_set);
	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_pix,
	CLKCTRL_PIX_DIV_MASK \| CLKCTRL_PIX_CLKGATE,
	k_best << CLKCTRL_PIX_DIV_OFFSET);

	while (readl(&clkctrl_regs->hw_clkctrl_pix) & CLKCTRL_PIX_BUSY)
	;
	#elif defined(CONFIG_MX28)
	writeb(CLKCTRL_FRAC_CLKGATE,
	&clkctrl_regs->hw_clkctrl_frac1_set[CLKCTRL_FRAC1_PIX]);
	writeb(CLKCTRL_FRAC_CLKGATE \| (x_best & CLKCTRL_FRAC_FRAC_MASK),
	&clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_PIX]);
	writeb(CLKCTRL_FRAC_CLKGATE,
	&clkctrl_regs->hw_clkctrl_frac1_clr[CLKCTRL_FRAC1_PIX]);

	writel(CLKCTRL_DIS_LCDIF_CLKGATE,
	&clkctrl_regs->hw_clkctrl_lcdif_set);
	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_lcdif,
	CLKCTRL_DIS_LCDIF_DIV_MASK \| CLKCTRL_DIS_LCDIF_CLKGATE,
	k_best << CLKCTRL_DIS_LCDIF_DIV_OFFSET);

	while (readl(&clkctrl_regs->hw_clkctrl_lcdif) & CLKCTRL_DIS_LCDIF_BUSY)
	;
	#endif
	}

	uint32_t mxc_get_clock(enum mxc_clock clk)
	{
	switch (clk) {
	case MXC_ARM_CLK:
	return mxs_get_pclk() * 1000000;
	case MXC_GPMI_CLK:
	return mxs_get_gpmiclk() * 1000000;
	case MXC_AHB_CLK:
	case MXC_IPG_CLK:
	return mxs_get_hclk() * 1000000;
	case MXC_EMI_CLK:
	return mxs_get_emiclk();
	case MXC_IO0_CLK:
	return mxs_get_ioclk(MXC_IOCLK0);
	case MXC_IO1_CLK:
	return mxs_get_ioclk(MXC_IOCLK1);
	case MXC_XTAL_CLK:
	return XTAL_FREQ_KHZ * 1000;
	case MXC_SSP0_CLK:
	return mxs_get_sspclk(MXC_SSPCLK0);
	#ifdef CONFIG_MX28
	case MXC_SSP1_CLK:
	return mxs_get_sspclk(MXC_SSPCLK1);
	case MXC_SSP2_CLK:
	return mxs_get_sspclk(MXC_SSPCLK2);
	case MXC_SSP3_CLK:
	return mxs_get_sspclk(MXC_SSPCLK3);
	#endif
	}

	return 0;
	}