| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * |
| * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com> |
| * |
| * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> |
| */ |
| |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/clock.h> |
| |
| void mx31_uart1_hw_init(void) |
| { |
| /* setup pins for UART1 */ |
| mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX); |
| mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX); |
| mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); |
| mx31_gpio_mux(MUX_CTS1__UART1_CTS_B); |
| } |
| |
| void mx31_uart2_hw_init(void) |
| { |
| /* setup pins for UART2 */ |
| mx31_gpio_mux(MUX_RXD2__UART2_RXD_MUX); |
| mx31_gpio_mux(MUX_TXD2__UART2_TXD_MUX); |
| mx31_gpio_mux(MUX_RTS2__UART2_RTS_B); |
| mx31_gpio_mux(MUX_CTS2__UART2_CTS_B); |
| } |
| |
| #ifdef CONFIG_MXC_SPI |
| /* |
| * Note: putting several spi setups here makes no sense as they may differ |
| * at board level (physical pin SS0 of CSPI2 may aswell be used as SS0 of CSPI3) |
| */ |
| void mx31_spi2_hw_init(void) |
| { |
| /* SPI2 */ |
| mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B); |
| mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK); |
| mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B); |
| mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI); |
| mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO); |
| mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B); |
| mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B); |
| |
| /* start SPI2 clock */ |
| __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4); |
| } |
| #endif |