| // SPDX-License-Identifier: (GPL-2.0+ or MIT) |
| /* |
| * Copyright (C) 2021 Arm Ltd. |
| */ |
| |
| /dts-v1/; |
| |
| #include "sun50i-h616.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| model = "X96 Mate"; |
| compatible = "hechuang,x96-mate", "allwinner,sun50i-h616"; |
| |
| aliases { |
| serial0 = &uart0; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| reg_vcc5v: vcc5v { |
| /* board wide 5V supply directly from the DC input */ |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc-5v"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| }; |
| }; |
| |
| &ir { |
| status = "okay"; |
| }; |
| |
| &mmc0 { |
| vmmc-supply = <®_dcdce>; |
| cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| &mmc2 { |
| vmmc-supply = <®_dcdce>; |
| vqmmc-supply = <®_bldo1>; |
| bus-width = <8>; |
| non-removable; |
| cap-mmc-hw-reset; |
| mmc-ddr-1_8v; |
| mmc-hs200-1_8v; |
| status = "okay"; |
| }; |
| |
| &r_rsb { |
| status = "okay"; |
| |
| axp305: pmic@745 { |
| compatible = "x-powers,axp305", "x-powers,axp805", |
| "x-powers,axp806"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x745>; |
| |
| x-powers,self-working-mode; |
| vina-supply = <®_vcc5v>; |
| vinb-supply = <®_vcc5v>; |
| vinc-supply = <®_vcc5v>; |
| vind-supply = <®_vcc5v>; |
| vine-supply = <®_vcc5v>; |
| aldoin-supply = <®_vcc5v>; |
| bldoin-supply = <®_vcc5v>; |
| cldoin-supply = <®_vcc5v>; |
| |
| regulators { |
| reg_aldo1: aldo1 { |
| regulator-always-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vcc-sys"; |
| }; |
| |
| /* Enabled by the Android BSP */ |
| reg_aldo2: aldo2 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vcc3v3-ext"; |
| status = "disabled"; |
| }; |
| |
| /* Enabled by the Android BSP */ |
| reg_aldo3: aldo3 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vcc3v3-ext2"; |
| status = "disabled"; |
| }; |
| |
| reg_bldo1: bldo1 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-name = "vcc1v8"; |
| }; |
| |
| /* Enabled by the Android BSP */ |
| reg_bldo2: bldo2 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-name = "vcc1v8-2"; |
| status = "disabled"; |
| }; |
| |
| bldo3 { |
| /* unused */ |
| }; |
| |
| bldo4 { |
| /* unused */ |
| }; |
| |
| cldo1 { |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-name = "vcc2v5"; |
| }; |
| |
| cldo2 { |
| /* unused */ |
| }; |
| |
| cldo3 { |
| /* unused */ |
| }; |
| |
| reg_dcdca: dcdca { |
| regulator-always-on; |
| regulator-min-microvolt = <810000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-name = "vdd-cpu"; |
| }; |
| |
| reg_dcdcc: dcdcc { |
| regulator-always-on; |
| regulator-min-microvolt = <810000>; |
| regulator-max-microvolt = <990000>; |
| regulator-name = "vdd-gpu-sys"; |
| }; |
| |
| reg_dcdcd: dcdcd { |
| regulator-always-on; |
| regulator-min-microvolt = <1360000>; |
| regulator-max-microvolt = <1360000>; |
| regulator-name = "vdd-dram"; |
| }; |
| |
| reg_dcdce: dcdce { |
| regulator-always-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vcc-eth-mmc"; |
| }; |
| |
| sw { |
| /* unused */ |
| }; |
| }; |
| }; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_ph_pins>; |
| status = "okay"; |
| }; |