| .. SPDX-License-Identifier: GPL-2.0-or-later |
| .. sectionauthor:: Marcel Ziswiler <marcel.ziswiler@toradex.com> |
| |
| Verdin iMX8M Plus Module |
| ======================== |
| |
| - SoM: https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus |
| - Carrier board: https://www.toradex.com/products/carrier-board/verdin-development-board-kit |
| |
| Quick Start |
| ----------- |
| |
| - Build the ARM trusted firmware binary |
| - Get the DDR firmware |
| - Build U-Boot |
| - Flash to eMMC |
| - Boot |
| |
| Get and Build the ARM Trusted Firmware (Trusted Firmware A) |
| ----------------------------------------------------------- |
| |
| .. code-block:: bash |
| |
| $ echo "Downloading and building TF-A..." |
| $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git |
| $ cd trusted-firmware-a |
| |
| Then build ATF (TF-A): |
| |
| .. code-block:: bash |
| |
| $ export CROSS_COMPILE=aarch64-linux-gnu- |
| $ make PLAT=imx8mp IMX_BOOT_UART_BASE=0x30880000 bl31 |
| $ cp build/imx8mp/release/bl31.bin ../ |
| |
| Get the DDR Firmware |
| -------------------- |
| |
| .. code-block:: bash |
| |
| $ cd .. |
| $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.1.bin |
| $ chmod +x firmware-imx-8.10.1.bin |
| $ ./firmware-imx-8.10.1.bin |
| $ cp firmware-imx-8.10.1/firmware/ddr/synopsys/lpddr4*_202006.bin ./ |
| |
| Build U-Boot |
| ------------ |
| .. code-block:: bash |
| |
| $ export CROSS_COMPILE=aarch64-linux-gnu- |
| $ make verdin-imx8mp_defconfig |
| $ make |
| |
| Flash to eMMC |
| ------------- |
| |
| .. code-block:: bash |
| |
| > tftpboot ${loadaddr} flash.bin |
| > setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200 |
| > mmc dev 2 1 && mmc write ${loadaddr} 0x0 ${blkcnt} |
| |
| As a convenience, instead of the last two commands one may also use the update |
| U-Boot wrapper: |
| |
| .. code-block:: bash |
| |
| > run update_uboot |
| |
| Boot |
| ---- |
| |
| ATF, U-Boot proper and u-boot.dtb images are packed into FIT image, |
| which is loaded and parsed by SPL. |
| |
| Boot sequence is: |
| |
| * SPL ---> ATF (TF-A) ---> U-Boot proper |
| |
| Output: |
| |
| .. code-block:: none |
| |
| U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) |
| Quad die, dual rank failed, attempting dual die, single rank configuration. |
| Normal Boot |
| WDT: Started watchdog@30280000 with servicing (60s timeout) |
| Trying to boot from BOOTROM |
| Find img info 0x&48025a00, size 872 |
| Need continue download 1024 |
| Download 779264, Total size 780424 |
| NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b |
| NOTICE: BL31: Built : 16:52:37, Aug 26 2021 |
| |
| |
| U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) |
| |
| CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz |
| Reset cause: POR |
| DRAM: 8 GiB |
| Core: 78 devices, 18 uclasses, devicetree: separate |
| WDT: Started watchdog@30280000 with servicing (60s timeout) |
| MMC: FSL_SDHC: 1, FSL_SDHC: 2 |
| Loading Environment from MMC... OK |
| In: serial |
| Out: serial |
| Err: serial |
| Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 |
| Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 |
| Setting variant to wifi |
| Net: Hard-coding pdata->enetaddr |
| eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] |
| Hit any key to stop autoboot: 0 |
| Verdin iMX8MP # |