dts/upstream/src/arm64/rockchip/rk3588-extra.dtsi - filogic/uboot - Gitiles

 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
  */

 #include "rk3588-base.dtsi"
 #include "rk3588-extra-pinctrl.dtsi"

 / {
 	usb_host1_xhci: usb@fc400000 {
 		compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
 		reg = <0x0 0xfc400000 0x0 0x400000>;
 		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>,
 			 <&cru ACLK_USB3OTG1>;
 		clock-names = "ref_clk", "suspend_clk", "bus_clk";
 		dr_mode = "otg";
 		phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>;
 		phy-names = "usb2-phy", "usb3-phy";
 		phy_type = "utmi_wide";
 		power-domains = <&power RK3588_PD_USB>;
 		resets = <&cru SRST_A_USB3OTG1>;
 		snps,dis_enblslpm_quirk;
 		snps,dis-u2-freeclk-exists-quirk;
 		snps,dis-del-phy-power-chg-quirk;
 		snps,dis-tx-ipgap-linecheck-quirk;
 		status = "disabled";
 	};

 	pcie30_phy_grf: syscon@fd5b8000 {
 		compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
 		reg = <0x0 0xfd5b8000 0x0 0x10000>;
 	};

 	pipe_phy1_grf: syscon@fd5c0000 {
 		compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
 		reg = <0x0 0xfd5c0000 0x0 0x100>;
 	};

 	usbdpphy1_grf: syscon@fd5cc000 {
 		compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
 		reg = <0x0 0xfd5cc000 0x0 0x4000>;
 	};

 	usb2phy1_grf: syscon@fd5d4000 {
 		compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xfd5d4000 0x0 0x4000>;
 		#address-cells = <1>;
 		#size-cells = <1>;

 		u2phy1: usb2phy@4000 {
 			compatible = "rockchip,rk3588-usb2phy";
 			reg = <0x4000 0x10>;
 			#clock-cells = <0>;
 			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
 			clock-names = "phyclk";
 			clock-output-names = "usb480m_phy1";
 			interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>;
 			resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>;
 			reset-names = "phy", "apb";
 			status = "disabled";

 			u2phy1_otg: otg-port {
 				#phy-cells = <0>;
 				status = "disabled";
 			};
 		};
 	};

 	i2s8_8ch: i2s@fddc8000 {
 		compatible = "rockchip,rk3588-i2s-tdm";
 		reg = <0x0 0xfddc8000 0x0 0x1000>;
 		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>;
 		clock-names = "mclk_tx", "mclk_rx", "hclk";
 		assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>;
 		assigned-clock-parents = <&cru PLL_AUPLL>;
 		dmas = <&dmac2 22>;
 		dma-names = "tx";
 		power-domains = <&power RK3588_PD_VO0>;
 		resets = <&cru SRST_M_I2S8_8CH_TX>;
 		reset-names = "tx-m";
 		#sound-dai-cells = <0>;
 		status = "disabled";
 	};

 	i2s6_8ch: i2s@fddf4000 {
 		compatible = "rockchip,rk3588-i2s-tdm";
 		reg = <0x0 0xfddf4000 0x0 0x1000>;
 		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>;
 		clock-names = "mclk_tx", "mclk_rx", "hclk";
 		assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>;
 		assigned-clock-parents = <&cru PLL_AUPLL>;
 		dmas = <&dmac2 4>;
 		dma-names = "tx";
 		power-domains = <&power RK3588_PD_VO1>;
 		resets = <&cru SRST_M_I2S6_8CH_TX>;
 		reset-names = "tx-m";
 		#sound-dai-cells = <0>;
 		status = "disabled";
 	};

 	i2s7_8ch: i2s@fddf8000 {
 		compatible = "rockchip,rk3588-i2s-tdm";
 		reg = <0x0 0xfddf8000 0x0 0x1000>;
 		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>;
 		clock-names = "mclk_tx", "mclk_rx", "hclk";
 		assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>;
 		assigned-clock-parents = <&cru PLL_AUPLL>;
 		dmas = <&dmac2 21>;
 		dma-names = "rx";
 		power-domains = <&power RK3588_PD_VO1>;
 		resets = <&cru SRST_M_I2S7_8CH_RX>;
 		reset-names = "rx-m";
 		#sound-dai-cells = <0>;
 		status = "disabled";
 	};

 	i2s10_8ch: i2s@fde00000 {
 		compatible = "rockchip,rk3588-i2s-tdm";
 		reg = <0x0 0xfde00000 0x0 0x1000>;
 		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>;
 		clock-names = "mclk_tx", "mclk_rx", "hclk";
 		assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>;
 		assigned-clock-parents = <&cru PLL_AUPLL>;
 		dmas = <&dmac2 24>;
 		dma-names = "rx";
 		power-domains = <&power RK3588_PD_VO1>;
 		resets = <&cru SRST_M_I2S10_8CH_RX>;
 		reset-names = "rx-m";
 		#sound-dai-cells = <0>;
 		status = "disabled";
 	};

 	pcie3x4: pcie@fe150000 {
 		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		bus-range = <0x00 0x0f>;
 		clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
 			 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
 			 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
 		clock-names = "aclk_mst", "aclk_slv",
 			      "aclk_dbi", "pclk",
 			      "aux", "pipe";
 		device_type = "pci";
 		interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
 		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map = <0 0 0 1 &pcie3x4_intc 0>,
 				<0 0 0 2 &pcie3x4_intc 1>,
 				<0 0 0 3 &pcie3x4_intc 2>,
 				<0 0 0 4 &pcie3x4_intc 3>;
 		linux,pci-domain = <0>;
 		max-link-speed = <3>;
 		msi-map = <0x0000 &its1 0x0000 0x1000>;
 		num-lanes = <4>;
 		phys = <&pcie30phy>;
 		phy-names = "pcie-phy";
 		power-domains = <&power RK3588_PD_PCIE>;
 		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
 			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>,
 			 <0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>;
 		reg = <0xa 0x40000000 0x0 0x00400000>,
 		      <0x0 0xfe150000 0x0 0x00010000>,
 		      <0x0 0xf0000000 0x0 0x00100000>;
 		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
 		reset-names = "pwr", "pipe";
 		status = "disabled";

 		pcie3x4_intc: legacy-interrupt-controller {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>;
 		};
 	};

 	pcie3x2: pcie@fe160000 {
 		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		bus-range = <0x10 0x1f>;
 		clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
 			 <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
 			 <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>;
 		clock-names = "aclk_mst", "aclk_slv",
 			      "aclk_dbi", "pclk",
 			      "aux", "pipe";
 		device_type = "pci";
 		interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
 		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
 				<0 0 0 2 &pcie3x2_intc 1>,
 				<0 0 0 3 &pcie3x2_intc 2>,
 				<0 0 0 4 &pcie3x2_intc 3>;
 		linux,pci-domain = <1>;
 		max-link-speed = <3>;
 		msi-map = <0x1000 &its1 0x1000 0x1000>;
 		num-lanes = <2>;
 		phys = <&pcie30phy>;
 		phy-names = "pcie-phy";
 		power-domains = <&power RK3588_PD_PCIE>;
 		ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>,
 			 <0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>,
 			 <0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>;
 		reg = <0xa 0x40400000 0x0 0x00400000>,
 		      <0x0 0xfe160000 0x0 0x00010000>,
 		      <0x0 0xf1000000 0x0 0x00100000>;
 		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
 		reset-names = "pwr", "pipe";
 		status = "disabled";

 		pcie3x2_intc: legacy-interrupt-controller {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>;
 		};
 	};

 	pcie2x1l0: pcie@fe170000 {
 		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
 		bus-range = <0x20 0x2f>;
 		clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>,
 			 <&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>,
 			 <&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>;
 		clock-names = "aclk_mst", "aclk_slv",
 			      "aclk_dbi", "pclk",
 			      "aux", "pipe";
 		device_type = "pci";
 		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
 		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>,
 				<0 0 0 2 &pcie2x1l0_intc 1>,
 				<0 0 0 3 &pcie2x1l0_intc 2>,
 				<0 0 0 4 &pcie2x1l0_intc 3>;
 		linux,pci-domain = <2>;
 		max-link-speed = <2>;
 		msi-map = <0x2000 &its0 0x2000 0x1000>;
 		num-lanes = <1>;
 		phys = <&combphy1_ps PHY_TYPE_PCIE>;
 		phy-names = "pcie-phy";
 		power-domains = <&power RK3588_PD_PCIE>;
 		ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
 			 <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>,
 			 <0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>;
 		reg = <0xa 0x40800000 0x0 0x00400000>,
 		      <0x0 0xfe170000 0x0 0x00010000>,
 		      <0x0 0xf2000000 0x0 0x00100000>;
 		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>;
 		reset-names = "pwr", "pipe";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		status = "disabled";

 		pcie2x1l0_intc: legacy-interrupt-controller {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>;
 		};
 	};

 	gmac0: ethernet@fe1b0000 {
 		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe1b0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>,
 			     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
 		interrupt-names = "macirq", "eth_wake_irq";
 		clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
 			 <&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>,
 			 <&cru CLK_GMAC0_PTP_REF>;
 		clock-names = "stmmaceth", "clk_mac_ref",
 			      "pclk_mac", "aclk_mac",
 			      "ptp_ref";
 		power-domains = <&power RK3588_PD_GMAC>;
 		resets = <&cru SRST_A_GMAC0>;
 		reset-names = "stmmaceth";
 		rockchip,grf = <&sys_grf>;
 		rockchip,php-grf = <&php_grf>;
 		snps,axi-config = <&gmac0_stmmac_axi_setup>;
 		snps,mixed-burst;
 		snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
 		snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
 		snps,tso;
 		status = "disabled";

 		mdio0: mdio {
 			compatible = "snps,dwmac-mdio";
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 		};

 		gmac0_stmmac_axi_setup: stmmac-axi-config {
 			snps,blen = <0 0 0 0 16 8 4>;
 			snps,wr_osr_lmt = <4>;
 			snps,rd_osr_lmt = <8>;
 		};

 		gmac0_mtl_rx_setup: rx-queues-config {
 			snps,rx-queues-to-use = <2>;
 			queue0 {};
 			queue1 {};
 		};

 		gmac0_mtl_tx_setup: tx-queues-config {
 			snps,tx-queues-to-use = <2>;
 			queue0 {};
 			queue1 {};
 		};
 	};

 	sata1: sata@fe220000 {
 		compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
 		reg = <0 0xfe220000 0 0x1000>;
 		interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
 			 <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>,
 			 <&cru CLK_PIPEPHY1_PIPE_ASIC_G>;
 		clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
 		ports-implemented = <0x1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";

 		sata-port@0 {
 			reg = <0>;
 			hba-port-cap = <HBA_PORT_FBSCP>;
 			phys = <&combphy1_ps PHY_TYPE_SATA>;
 			phy-names = "sata-phy";
 			snps,rx-ts-max = <32>;
 			snps,tx-ts-max = <32>;
 		};
 	};

 	usbdp_phy1: phy@fed90000 {
 		compatible = "rockchip,rk3588-usbdp-phy";
 		reg = <0x0 0xfed90000 0x0 0x10000>;
 		#phy-cells = <1>;
 		clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
 			 <&cru CLK_USBDP_PHY1_IMMORTAL>,
 			 <&cru PCLK_USBDPPHY1>,
 			 <&u2phy1>;
 		clock-names = "refclk", "immortal", "pclk", "utmi";
 		resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>,
 			 <&cru SRST_USBDP_COMBO_PHY1_CMN>,
 			 <&cru SRST_USBDP_COMBO_PHY1_LANE>,
 			 <&cru SRST_USBDP_COMBO_PHY1_PCS>,
 			 <&cru SRST_P_USBDPPHY1>;
 		reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
 		rockchip,u2phy-grf = <&usb2phy1_grf>;
 		rockchip,usb-grf = <&usb_grf>;
 		rockchip,usbdpphy-grf = <&usbdpphy1_grf>;
 		rockchip,vo-grf = <&vo0_grf>;
 		status = "disabled";
 	};

 	combphy1_ps: phy@fee10000 {
 		compatible = "rockchip,rk3588-naneng-combphy";
 		reg = <0x0 0xfee10000 0x0 0x100>;
 		clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>,
 			 <&cru PCLK_PHP_ROOT>;
 		clock-names = "ref", "apb", "pipe";
 		assigned-clocks = <&cru CLK_REF_PIPE_PHY1>;
 		assigned-clock-rates = <100000000>;
 		#phy-cells = <1>;
 		resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>;
 		reset-names = "phy", "apb";
 		rockchip,pipe-grf = <&php_grf>;
 		rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
 		status = "disabled";
 	};

 	pcie30phy: phy@fee80000 {
 		compatible = "rockchip,rk3588-pcie3-phy";
 		reg = <0x0 0xfee80000 0x0 0x20000>;
 		#phy-cells = <0>;
 		clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>;
 		clock-names = "pclk";
 		resets = <&cru SRST_PCIE30_PHY>;
 		reset-names = "phy";
 		rockchip,pipe-grf = <&php_grf>;
 		rockchip,phy-grf = <&pcie30_phy_grf>;
 		status = "disabled";
 	};
 };
	// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
	/*
	* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
	*/

	#include "rk3588-base.dtsi"
	#include "rk3588-extra-pinctrl.dtsi"

	/ {
	usb_host1_xhci: usb@fc400000 {
	compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
	reg = <0x0 0xfc400000 0x0 0x400000>;
	interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>;
	clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>,
	<&cru ACLK_USB3OTG1>;
	clock-names = "ref_clk", "suspend_clk", "bus_clk";
	dr_mode = "otg";
	phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>;
	phy-names = "usb2-phy", "usb3-phy";
	phy_type = "utmi_wide";
	power-domains = <&power RK3588_PD_USB>;
	resets = <&cru SRST_A_USB3OTG1>;
	snps,dis_enblslpm_quirk;
	snps,dis-u2-freeclk-exists-quirk;
	snps,dis-del-phy-power-chg-quirk;
	snps,dis-tx-ipgap-linecheck-quirk;
	status = "disabled";
	};

	pcie30_phy_grf: syscon@fd5b8000 {
	compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
	reg = <0x0 0xfd5b8000 0x0 0x10000>;
	};

	pipe_phy1_grf: syscon@fd5c0000 {
	compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
	reg = <0x0 0xfd5c0000 0x0 0x100>;
	};

	usbdpphy1_grf: syscon@fd5cc000 {
	compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
	reg = <0x0 0xfd5cc000 0x0 0x4000>;
	};

	usb2phy1_grf: syscon@fd5d4000 {
	compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
	reg = <0x0 0xfd5d4000 0x0 0x4000>;
	#address-cells = <1>;
	#size-cells = <1>;

	u2phy1: usb2phy@4000 {
	compatible = "rockchip,rk3588-usb2phy";
	reg = <0x4000 0x10>;
	#clock-cells = <0>;
	clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
	clock-names = "phyclk";
	clock-output-names = "usb480m_phy1";
	interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>;
	resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>;
	reset-names = "phy", "apb";
	status = "disabled";

	u2phy1_otg: otg-port {
	#phy-cells = <0>;
	status = "disabled";
	};
	};
	};

	i2s8_8ch: i2s@fddc8000 {
	compatible = "rockchip,rk3588-i2s-tdm";
	reg = <0x0 0xfddc8000 0x0 0x1000>;
	interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>;
	clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>;
	clock-names = "mclk_tx", "mclk_rx", "hclk";
	assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>;
	assigned-clock-parents = <&cru PLL_AUPLL>;
	dmas = <&dmac2 22>;
	dma-names = "tx";
	power-domains = <&power RK3588_PD_VO0>;
	resets = <&cru SRST_M_I2S8_8CH_TX>;
	reset-names = "tx-m";
	#sound-dai-cells = <0>;
	status = "disabled";
	};

	i2s6_8ch: i2s@fddf4000 {
	compatible = "rockchip,rk3588-i2s-tdm";
	reg = <0x0 0xfddf4000 0x0 0x1000>;
	interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
	clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>;
	clock-names = "mclk_tx", "mclk_rx", "hclk";
	assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>;
	assigned-clock-parents = <&cru PLL_AUPLL>;
	dmas = <&dmac2 4>;
	dma-names = "tx";
	power-domains = <&power RK3588_PD_VO1>;
	resets = <&cru SRST_M_I2S6_8CH_TX>;
	reset-names = "tx-m";
	#sound-dai-cells = <0>;
	status = "disabled";
	};

	i2s7_8ch: i2s@fddf8000 {
	compatible = "rockchip,rk3588-i2s-tdm";
	reg = <0x0 0xfddf8000 0x0 0x1000>;
	interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>;
	clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>;
	clock-names = "mclk_tx", "mclk_rx", "hclk";
	assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>;
	assigned-clock-parents = <&cru PLL_AUPLL>;
	dmas = <&dmac2 21>;
	dma-names = "rx";
	power-domains = <&power RK3588_PD_VO1>;
	resets = <&cru SRST_M_I2S7_8CH_RX>;
	reset-names = "rx-m";
	#sound-dai-cells = <0>;
	status = "disabled";
	};

	i2s10_8ch: i2s@fde00000 {
	compatible = "rockchip,rk3588-i2s-tdm";
	reg = <0x0 0xfde00000 0x0 0x1000>;
	interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>;
	clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>;
	clock-names = "mclk_tx", "mclk_rx", "hclk";
	assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>;
	assigned-clock-parents = <&cru PLL_AUPLL>;
	dmas = <&dmac2 24>;
	dma-names = "rx";
	power-domains = <&power RK3588_PD_VO1>;
	resets = <&cru SRST_M_I2S10_8CH_RX>;
	reset-names = "rx-m";
	#sound-dai-cells = <0>;
	status = "disabled";
	};

	pcie3x4: pcie@fe150000 {
	compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
	#address-cells = <3>;
	#size-cells = <2>;
	bus-range = <0x00 0x0f>;
	clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
	<&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
	<&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
	clock-names = "aclk_mst", "aclk_slv",
	"aclk_dbi", "pclk",
	"aux", "pipe";
	device_type = "pci";
	interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
	interrupt-names = "sys", "pmc", "msg", "legacy", "err";
	#interrupt-cells = <1>;
	interrupt-map-mask = <0 0 0 7>;
	interrupt-map = <0 0 0 1 &pcie3x4_intc 0>,
	<0 0 0 2 &pcie3x4_intc 1>,
	<0 0 0 3 &pcie3x4_intc 2>,
	<0 0 0 4 &pcie3x4_intc 3>;
	linux,pci-domain = <0>;
	max-link-speed = <3>;
	msi-map = <0x0000 &its1 0x0000 0x1000>;
	num-lanes = <4>;
	phys = <&pcie30phy>;
	phy-names = "pcie-phy";
	power-domains = <&power RK3588_PD_PCIE>;
	ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
	<0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>,
	<0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>;
	reg = <0xa 0x40000000 0x0 0x00400000>,
	<0x0 0xfe150000 0x0 0x00010000>,
	<0x0 0xf0000000 0x0 0x00100000>;
	reg-names = "dbi", "apb", "config";
	resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
	reset-names = "pwr", "pipe";
	status = "disabled";

	pcie3x4_intc: legacy-interrupt-controller {
	interrupt-controller;
	#address-cells = <0>;
	#interrupt-cells = <1>;
	interrupt-parent = <&gic>;
	interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>;
	};
	};

	pcie3x2: pcie@fe160000 {
	compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
	#address-cells = <3>;
	#size-cells = <2>;
	bus-range = <0x10 0x1f>;
	clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
	<&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
	<&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>;
	clock-names = "aclk_mst", "aclk_slv",
	"aclk_dbi", "pclk",
	"aux", "pipe";
	device_type = "pci";
	interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
	interrupt-names = "sys", "pmc", "msg", "legacy", "err";
	#interrupt-cells = <1>;
	interrupt-map-mask = <0 0 0 7>;
	interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
	<0 0 0 2 &pcie3x2_intc 1>,
	<0 0 0 3 &pcie3x2_intc 2>,
	<0 0 0 4 &pcie3x2_intc 3>;
	linux,pci-domain = <1>;
	max-link-speed = <3>;
	msi-map = <0x1000 &its1 0x1000 0x1000>;
	num-lanes = <2>;
	phys = <&pcie30phy>;
	phy-names = "pcie-phy";
	power-domains = <&power RK3588_PD_PCIE>;
	ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>,
	<0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>,
	<0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>;
	reg = <0xa 0x40400000 0x0 0x00400000>,
	<0x0 0xfe160000 0x0 0x00010000>,
	<0x0 0xf1000000 0x0 0x00100000>;
	reg-names = "dbi", "apb", "config";
	resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
	reset-names = "pwr", "pipe";
	status = "disabled";

	pcie3x2_intc: legacy-interrupt-controller {
	interrupt-controller;
	#address-cells = <0>;
	#interrupt-cells = <1>;
	interrupt-parent = <&gic>;
	interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>;
	};
	};

	pcie2x1l0: pcie@fe170000 {
	compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
	bus-range = <0x20 0x2f>;
	clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>,
	<&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>,
	<&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>;
	clock-names = "aclk_mst", "aclk_slv",
	"aclk_dbi", "pclk",
	"aux", "pipe";
	device_type = "pci";
	interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
	interrupt-names = "sys", "pmc", "msg", "legacy", "err";
	#interrupt-cells = <1>;
	interrupt-map-mask = <0 0 0 7>;
	interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>,
	<0 0 0 2 &pcie2x1l0_intc 1>,
	<0 0 0 3 &pcie2x1l0_intc 2>,
	<0 0 0 4 &pcie2x1l0_intc 3>;
	linux,pci-domain = <2>;
	max-link-speed = <2>;
	msi-map = <0x2000 &its0 0x2000 0x1000>;
	num-lanes = <1>;
	phys = <&combphy1_ps PHY_TYPE_PCIE>;
	phy-names = "pcie-phy";
	power-domains = <&power RK3588_PD_PCIE>;
	ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
	<0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>,
	<0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>;
	reg = <0xa 0x40800000 0x0 0x00400000>,
	<0x0 0xfe170000 0x0 0x00010000>,
	<0x0 0xf2000000 0x0 0x00100000>;
	reg-names = "dbi", "apb", "config";
	resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>;
	reset-names = "pwr", "pipe";
	#address-cells = <3>;
	#size-cells = <2>;
	status = "disabled";

	pcie2x1l0_intc: legacy-interrupt-controller {
	interrupt-controller;
	#address-cells = <0>;
	#interrupt-cells = <1>;
	interrupt-parent = <&gic>;
	interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>;
	};
	};

	gmac0: ethernet@fe1b0000 {
	compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
	reg = <0x0 0xfe1b0000 0x0 0x10000>;
	interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>,
	<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
	interrupt-names = "macirq", "eth_wake_irq";
	clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
	<&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>,
	<&cru CLK_GMAC0_PTP_REF>;
	clock-names = "stmmaceth", "clk_mac_ref",
	"pclk_mac", "aclk_mac",
	"ptp_ref";
	power-domains = <&power RK3588_PD_GMAC>;
	resets = <&cru SRST_A_GMAC0>;
	reset-names = "stmmaceth";
	rockchip,grf = <&sys_grf>;
	rockchip,php-grf = <&php_grf>;
	snps,axi-config = <&gmac0_stmmac_axi_setup>;
	snps,mixed-burst;
	snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
	snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
	snps,tso;
	status = "disabled";

	mdio0: mdio {
	compatible = "snps,dwmac-mdio";
	#address-cells = <0x1>;
	#size-cells = <0x0>;
	};

	gmac0_stmmac_axi_setup: stmmac-axi-config {
	snps,blen = <0 0 0 0 16 8 4>;
	snps,wr_osr_lmt = <4>;
	snps,rd_osr_lmt = <8>;
	};

	gmac0_mtl_rx_setup: rx-queues-config {
	snps,rx-queues-to-use = <2>;
	queue0 {};
	queue1 {};
	};

	gmac0_mtl_tx_setup: tx-queues-config {
	snps,tx-queues-to-use = <2>;
	queue0 {};
	queue1 {};
	};
	};

	sata1: sata@fe220000 {
	compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
	reg = <0 0xfe220000 0 0x1000>;
	interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
	clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
	<&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>,
	<&cru CLK_PIPEPHY1_PIPE_ASIC_G>;
	clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
	ports-implemented = <0x1>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "disabled";

	sata-port@0 {
	reg = <0>;
	hba-port-cap = <HBA_PORT_FBSCP>;
	phys = <&combphy1_ps PHY_TYPE_SATA>;
	phy-names = "sata-phy";
	snps,rx-ts-max = <32>;
	snps,tx-ts-max = <32>;
	};
	};

	usbdp_phy1: phy@fed90000 {
	compatible = "rockchip,rk3588-usbdp-phy";
	reg = <0x0 0xfed90000 0x0 0x10000>;
	#phy-cells = <1>;
	clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
	<&cru CLK_USBDP_PHY1_IMMORTAL>,
	<&cru PCLK_USBDPPHY1>,
	<&u2phy1>;
	clock-names = "refclk", "immortal", "pclk", "utmi";
	resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>,
	<&cru SRST_USBDP_COMBO_PHY1_CMN>,
	<&cru SRST_USBDP_COMBO_PHY1_LANE>,
	<&cru SRST_USBDP_COMBO_PHY1_PCS>,
	<&cru SRST_P_USBDPPHY1>;
	reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
	rockchip,u2phy-grf = <&usb2phy1_grf>;
	rockchip,usb-grf = <&usb_grf>;
	rockchip,usbdpphy-grf = <&usbdpphy1_grf>;
	rockchip,vo-grf = <&vo0_grf>;
	status = "disabled";
	};

	combphy1_ps: phy@fee10000 {
	compatible = "rockchip,rk3588-naneng-combphy";
	reg = <0x0 0xfee10000 0x0 0x100>;
	clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>,
	<&cru PCLK_PHP_ROOT>;
	clock-names = "ref", "apb", "pipe";
	assigned-clocks = <&cru CLK_REF_PIPE_PHY1>;
	assigned-clock-rates = <100000000>;
	#phy-cells = <1>;
	resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>;
	reset-names = "phy", "apb";
	rockchip,pipe-grf = <&php_grf>;
	rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
	status = "disabled";
	};

	pcie30phy: phy@fee80000 {
	compatible = "rockchip,rk3588-pcie3-phy";
	reg = <0x0 0xfee80000 0x0 0x20000>;
	#phy-cells = <0>;
	clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>;
	clock-names = "pclk";
	resets = <&cru SRST_PCIE30_PHY>;
	reset-names = "phy";
	rockchip,pipe-grf = <&php_grf>;
	rockchip,phy-grf = <&pcie30_phy_grf>;
	status = "disabled";
	};
	};