Merge tag 'u-boot-dfu-next-20240820' of https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20240820
- Migrate Atmel usb gadget to DM_USB_GADGET
- More small cleanups/improvements on the atmel UDC driver
- Change udc uclass name from "usb" -> "usb_gadget"
diff --git a/Kconfig b/Kconfig
index 82df59f..8b7b213 100644
--- a/Kconfig
+++ b/Kconfig
@@ -209,6 +209,7 @@
config NR_DRAM_BANKS
int "Number of DRAM banks"
default 1 if ARCH_SUNXI || ARCH_OWL
+ default 2 if OMAP34XX
default 4
help
This defines the number of DRAM banks.
@@ -236,6 +237,7 @@
config HAS_CUSTOM_SYS_INIT_SP_ADDR
bool "Use a custom location for the initial stack pointer address"
depends on ARC || (ARM && !INIT_SP_RELATIVE) || MIPS || PPC || RISCV
+ default y if OMAP34XX || AM33XX || AM43XX || DRA7XX
default y if TFABOOT
help
Typically, we use an initial stack pointer address that is calculated
@@ -249,6 +251,10 @@
config CUSTOM_SYS_INIT_SP_ADDR
hex "Static location for the initial stack pointer"
depends on HAS_CUSTOM_SYS_INIT_SP_ADDR
+ default 0x4020ff00 if OMAP34XX
+ default 0x4030ff00 if AM33XX
+ default 0x4033ff00 if AM43XX
+ default 0x4037ff00 if DRA7XX
default TEXT_BASE if TFABOOT
config SYS_MALLOC_F
@@ -615,6 +621,7 @@
config SYS_MONITOR_LEN
int "Maximum size in bytes reserved for U-Boot in memory"
default 1048576 if X86
+ default 262144 if OMAP34XX
default 786432 if ARCH_SUNXI
default 0
help
diff --git a/MAINTAINERS b/MAINTAINERS
index ddcb712..daaf034 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -732,6 +732,7 @@
F: arch/arm/include/asm/arch-omap*/
F: arch/arm/include/asm/ti-common/
F: board/ti/
+F: doc/board/ti/
F: drivers/dma/ti*
F: drivers/dma/ti*/
F: drivers/firmware/ti_sci.*
@@ -1648,6 +1649,7 @@
F: arch/arm/mach-omap2/config_secure.mk
F: arch/arm/mach-k3/security.c
F: configs/am335x_hs_evm_defconfig
+F: configs/am335x_hs_evm_spi_defconfig
F: configs/am335x_hs_evm_uart_defconfig
F: configs/am43xx_hs_evm_defconfig
F: configs/am43xx_hs_evm_qspi_defconfig
@@ -1709,6 +1711,19 @@
S: Maintained
F: drivers/ufs/
+UPL
+M: Simon Glass <sjg@chromium.org>
+S: Maintained
+T: git https://source.denx.de/u-boot/custodians/u-boot-dm.git
+F: boot/upl*
+F: cmd/upl.c
+F: common/spl/spl_upl.c
+F: doc/usage/upl.rst
+F: doc/usage/cmd/upl.rst
+F: include/upl.h
+F: test/boot/upl.c
+F: test/py/tests/test_upl.py
+
USB
M: Marek Vasut <marex@denx.de>
S: Maintained
diff --git a/Makefile b/Makefile
index 2861b4d..9a52cc8 100644
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
VERSION = 2024
PATCHLEVEL = 10
SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME =
# *DOCUMENTATION*
@@ -1473,8 +1473,10 @@
u-boot-lzma.img: u-boot.bin.lzma FORCE
$(call if_changed,mkimage)
+fit_image := $(if $(CONFIG_SANDBOX_VPL),u-boot,u-boot-nodtb.bin)
+
u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
- $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
+ $(if $(CONFIG_SPL_LOAD_FIT),$(fit_image) \
$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
,$(UBOOT_BIN)) FORCE
$(call if_changed,mkimage)
@@ -1839,7 +1841,7 @@
quiet_cmd_gen_envp = ENVP $@
cmd_gen_envp = \
if [ -s "$(ENV_FILE)" ]; then \
- $(CPP) -P $(CFLAGS) -x assembler-with-cpp -undef \
+ $(CPP) -P $(cpp_flags) -x assembler-with-cpp -undef \
-D__ASSEMBLY__ \
-D__UBOOT_CONFIG__ \
-I . -I include -I $(srctree)/include \
diff --git a/README b/README
index b76449b..4be1e8c 100644
--- a/README
+++ b/README
@@ -771,21 +771,8 @@
CFG_SYS_NUM_I2C_BUSES
Hold the number of i2c buses you want to use.
- CFG_SYS_I2C_DIRECT_BUS
- define this, if you don't use i2c muxes on your hardware.
- if CFG_SYS_I2C_MAX_HOPS is not defined or == 0 you can
- omit this define.
-
- CFG_SYS_I2C_MAX_HOPS
- define how many muxes are maximal consecutively connected
- on one i2c bus. If you not use i2c muxes, omit this
- define.
-
CFG_SYS_I2C_BUSES
- hold a list of buses you want to use, only used if
- CFG_SYS_I2C_DIRECT_BUS is not defined, for example
- a board with CFG_SYS_I2C_MAX_HOPS = 1 and
- CFG_SYS_NUM_I2C_BUSES = 9:
+ hold a list of buses you want to use
CFG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP}}, \
{0, {{I2C_MUX_PCA9547, 0x70, 1}}}, \
@@ -883,13 +870,6 @@
You should define these to the GPIO value as given directly to
the generic GPIO functions.
- CFG_I2C_MULTI_BUS
-
- This option allows the use of multiple I2C buses, each of which
- must have a controller. At any point in time, only one bus is
- active. To switch to a different bus, use the 'i2c dev' command.
- Note that bus numbering is zero-based.
-
CFG_SYS_I2C_NOPROBES
This option specifies a list of I2C devices that will be skipped
@@ -900,11 +880,6 @@
will skip addresses 0x50 and 0x68 on a board with one I2C bus
- CFG_SYS_RTC_BUS_NUM
-
- If defined, then this indicates the I2C bus number for the RTC.
- If not defined, then U-Boot assumes that RTC is on I2C bus 0.
-
CONFIG_SOFT_I2C_READ_REPEATED_START
defining this will force the i2c_read() function in
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ba0359f..656f588 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -802,7 +802,7 @@
bool "TI OMAP2+"
select CPU_V7A
select GPIO_EXTRA_HEADER
- select SPL_BOARD_INIT if SPL
+ select SPL_SOC_INIT if SPL
select SPL_STACK_R if SPL
select SUPPORT_SPL
imply TI_SYSC if DM && OF_CONTROL
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 82d37ad..4d59e98 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -678,6 +678,7 @@
sun50i-h6-tanix-tx6.dtb \
sun50i-h6-tanix-tx6-mini.dtb
dtb-$(CONFIG_MACH_SUN50I_H616) += \
+ sun50i-h313-tanix-tx1.dtb \
sun50i-h616-orangepi-zero2.dtb \
sun50i-h618-orangepi-zero2w.dtb \
sun50i-h618-orangepi-zero3.dtb \
@@ -763,8 +764,6 @@
imx6dl-icore.dtb \
imx6dl-icore-mipi.dtb \
imx6dl-icore-rqs.dtb \
- imx6dl-mba6a.dtb \
- imx6dl-mba6b.dtb \
imx6dl-mamoj.dtb \
imx6dl-nitrogen6x.dtb \
imx6dl-pico.dtb \
@@ -814,8 +813,6 @@
imx6q-kp.dtb \
imx6q-logicpd.dtb \
imx6q-marsboard.dtb \
- imx6q-mba6a.dtb \
- imx6q-mba6b.dtb \
imx6q-mccmon6.dtb\
imx6q-nitrogen6x.dtb \
imx6q-novena.dtb \
@@ -953,13 +950,6 @@
dtb-$(CONFIG_RZA1) += \
r7s72100-gr-peach.dtb
-dtb-$(CONFIG_ARCH_KEYSTONE) += keystone-k2hk-evm.dtb \
- keystone-k2l-evm.dtb \
- keystone-k2e-evm.dtb \
- keystone-k2g-evm.dtb \
- keystone-k2g-generic.dtb \
- keystone-k2g-ice.dtb
-
dtb-$(CONFIG_TARGET_AT91SAM9261EK) += at91sam9261ek.dtb
dtb-$(CONFIG_TARGET_PM9261) += at91sam9261ek.dtb
diff --git a/arch/arm/dts/amd-versal2-mini.dts b/arch/arm/dts/amd-versal2-mini.dts
new file mode 100644
index 0000000..ac68577
--- /dev/null
+++ b/arch/arm/dts/amd-versal2-mini.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Empty device tree for amd-versal2-mini
+ *
+ * Copyright (C) 2024, Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/ {
+};
diff --git a/arch/arm/dts/imx6dl-mba6b-u-boot.dtsi b/arch/arm/dts/imx6dl-mba6b-u-boot.dtsi
new file mode 100644
index 0000000..bb17ba9
--- /dev/null
+++ b/arch/arm/dts/imx6dl-mba6b-u-boot.dtsi
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "imx6qdl-mba6-u-boot.dtsi"
diff --git a/arch/arm/dts/imx6dl-mba6b.dts b/arch/arm/dts/imx6dl-mba6b.dts
deleted file mode 100644
index 610b19d..0000000
--- a/arch/arm/dts/imx6dl-mba6b.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6dl-tqma6b.dtsi"
-#include "imx6qdl-mba6.dtsi"
-#include "imx6qdl-mba6b.dtsi"
-#include "imx6dl-mba6.dtsi"
-
-/ {
- model = "TQ TQMa6S/DL on MBa6x";
- compatible = "tq,imx6dl-mba6x-b", "tq,mba6b",
- "tq,imx6dl-tqma6dl-b", "fsl,imx6dl";
-};
diff --git a/arch/arm/dts/imx6dl-tqma6a.dtsi b/arch/arm/dts/imx6dl-tqma6a.dtsi
deleted file mode 100644
index e891ef9..0000000
--- a/arch/arm/dts/imx6dl-tqma6a.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-tqma6a.dtsi"
-#include "imx6qdl-tqma6.dtsi"
-
-/ {
- memory@10000000 {
- device_type = "memory";
- reg = <0x10000000 0x20000000>;
- };
-};
diff --git a/arch/arm/dts/imx6dl-tqma6b.dtsi b/arch/arm/dts/imx6dl-tqma6b.dtsi
deleted file mode 100644
index 38cd850..0000000
--- a/arch/arm/dts/imx6dl-tqma6b.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include "imx6dl.dtsi"
-#include "imx6qdl-tqma6b.dtsi"
-#include "imx6qdl-tqma6.dtsi"
-
-/ {
- memory@10000000 {
- device_type = "memory";
- reg = <0x10000000 0x20000000>;
- };
-};
diff --git a/arch/arm/dts/imx6q-mba6b-u-boot.dtsi b/arch/arm/dts/imx6q-mba6b-u-boot.dtsi
new file mode 100644
index 0000000..bb17ba9
--- /dev/null
+++ b/arch/arm/dts/imx6q-mba6b-u-boot.dtsi
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "imx6qdl-mba6-u-boot.dtsi"
diff --git a/arch/arm/dts/imx6q-mba6b.dts b/arch/arm/dts/imx6q-mba6b.dts
deleted file mode 100644
index 02c9f3e..0000000
--- a/arch/arm/dts/imx6q-mba6b.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * Copyright 2013-2021 TQ-Systems GmbH
- * Author: Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-/dts-v1/;
-
-#include "imx6q-tqma6b.dtsi"
-#include "imx6qdl-mba6.dtsi"
-#include "imx6qdl-mba6b.dtsi"
-#include "imx6q-mba6.dtsi"
-
-/ {
- model = "TQ TQMa6Q on MBa6x";
- compatible = "tq,imx6q-mba6x-b", "tq,mba6b",
- "tq,imx6q-tqma6q-b", "fsl,imx6q";
-};
diff --git a/arch/arm/dts/imx6q-tqma6a.dtsi b/arch/arm/dts/imx6q-tqma6a.dtsi
deleted file mode 100644
index ab4c07c..0000000
--- a/arch/arm/dts/imx6q-tqma6a.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include "imx6q.dtsi"
-#include "imx6qdl-tqma6a.dtsi"
-#include "imx6qdl-tqma6.dtsi"
-
-/ {
- memory@10000000 {
- device_type = "memory";
- reg = <0x10000000 0x40000000>;
- };
-};
diff --git a/arch/arm/dts/imx6q-tqma6b.dtsi b/arch/arm/dts/imx6q-tqma6b.dtsi
deleted file mode 100644
index 7224c37..0000000
--- a/arch/arm/dts/imx6q-tqma6b.dtsi
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- */
-
-#include "imx6q.dtsi"
-#include "imx6qdl-tqma6b.dtsi"
-#include "imx6qdl-tqma6.dtsi"
-
-/ {
- memory@10000000 {
- device_type = "memory";
- reg = <0x10000000 0x40000000>;
- };
-};
diff --git a/arch/arm/dts/imx6qdl-mba6-u-boot.dtsi b/arch/arm/dts/imx6qdl-mba6-u-boot.dtsi
new file mode 100644
index 0000000..78457ef
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-mba6-u-boot.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "imx6qdl-u-boot.dtsi"
+
+/ {
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdog1>;
+ bootph-pre-ram;
+ };
+};
+
+&wdog1 {
+ bootph-pre-ram;
+};
diff --git a/arch/arm/dts/imx6qdl-tqma6.dtsi b/arch/arm/dts/imx6qdl-tqma6.dtsi
deleted file mode 100644
index 344ea93..0000000
--- a/arch/arm/dts/imx6qdl-tqma6.dtsi
+++ /dev/null
@@ -1,215 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "supply-3p3v";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-};
-
-&ecspi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1>;
- cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
- status = "okay";
-
- m25p80: flash@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- m25p,fast-read;
- };
-};
-
-&iomuxc {
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <
- /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
- MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099
- MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099
- MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099
- /* eCSPI1 SS1 */
- MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
- MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
- >;
- };
-
- pinctrl_i2c1_recovery: i2c1recoverygrp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b899
- MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b899
- >;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
- >;
- };
-
- pinctrl_i2c3_recovery: i2c3recoverygrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
- MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
- >;
- };
-
- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
- >;
- };
-};
-
-&pmic {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
- interrupt-parent = <&gpio6>;
- interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-
- regulators {
- reg_vddcore: sw1ab {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-always-on;
- };
-
- reg_vddsoc: sw1c {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-always-on;
- };
-
- reg_gen_3v3: sw2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_ddr_1v5a: sw3a {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-always-on;
- };
-
- reg_ddr_1v5b: sw3b {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-always-on;
- };
-
- sw4_reg: sw4 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_5v_600mA: swbst {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5150000>;
- regulator-always-on;
- };
-
- reg_snvs_3v: vsnvs {
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- reg_vrefddr: vrefddr {
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_vgen1_1v5: vgen1 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- /* not used */
- };
-
- reg_vgen2_1v2_eth: vgen2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- regulator-always-on;
- };
-
- reg_vgen3_2v8: vgen3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vgen4_1v8: vgen4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vgen5_1v8_eth: vgen5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- reg_vgen6_3v3: vgen6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
-};
-
-/* eMMC */
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- vmmc-supply = <®_3p3v>;
- non-removable;
- disable-wp;
- no-sd;
- no-sdio;
- bus-width = <8>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- mmccard: mmccard@0 {
- reg = <0>;
- compatible = "mmc-card";
- broken-hpi;
- };
-};
diff --git a/arch/arm/dts/imx6qdl-tqma6a.dtsi b/arch/arm/dts/imx6qdl-tqma6a.dtsi
deleted file mode 100644
index 7dc3f00..0000000
--- a/arch/arm/dts/imx6qdl-tqma6a.dtsi
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-&fec {
- interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
- <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
- fsl,err006687-workaround-present;
-};
-
-&i2c1 {
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c1>;
- pinctrl-1 = <&pinctrl_i2c1_recovery>;
- scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- clock-frequency = <100000>;
- status = "okay";
-
- pmic: pmic@8 {
- compatible = "fsl,pfuze100";
- reg = <0x08>;
- };
-
- sensor@48 {
- compatible = "national,lm75";
- reg = <0x48>;
- };
-
- eeprom@50 {
- compatible = "st,24c64", "atmel,24c64";
- reg = <0x50>;
- pagesize = <32>;
- };
-};
-
-&iomuxc {
- /*
- * This pinmuxing is required for the ERR006687 workaround. Board
- * DTS files that enable the FEC controller with
- * fsl,err006687-workaround-present must include this group.
- */
- pinctrl_enet_fix: enetfixgrp {
- fsl,pins = <
- /* ENET ping patch */
- MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
- >;
- };
-};
diff --git a/arch/arm/dts/imx6qdl-tqma6b.dtsi b/arch/arm/dts/imx6qdl-tqma6b.dtsi
deleted file mode 100644
index dd09257..0000000
--- a/arch/arm/dts/imx6qdl-tqma6b.dtsi
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-&i2c3 {
- pinctrl-names = "default", "gpio";
- pinctrl-0 = <&pinctrl_i2c3>;
- pinctrl-1 = <&pinctrl_i2c3_recovery>;
- scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- clock-frequency = <100000>;
- status = "okay";
-
- pmic: pmic@8 {
- compatible = "fsl,pfuze100";
- reg = <0x08>;
- };
-
- sensor@48 {
- compatible = "national,lm75";
- reg = <0x48>;
- };
-
- eeprom@50 {
- compatible = "st,24c64", "atmel,24c64";
- reg = <0x50>;
- pagesize = <32>;
- };
-};
diff --git a/arch/arm/dts/imx8ulp-evk-u-boot.dtsi b/arch/arm/dts/imx8ulp-evk-u-boot.dtsi
index 608bde3..f67fe16 100644
--- a/arch/arm/dts/imx8ulp-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8ulp-evk-u-boot.dtsi
@@ -3,6 +3,8 @@
* Copyright 2021 NXP
*/
+#include "imx8ulp-u-boot.dtsi"
+
/ {
mu@27020000 {
compatible = "fsl,imx8ulp-mu";
diff --git a/arch/arm/dts/imx8ulp-u-boot.dtsi b/arch/arm/dts/imx8ulp-u-boot.dtsi
new file mode 100644
index 0000000..30baaef
--- /dev/null
+++ b/arch/arm/dts/imx8ulp-u-boot.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#ifdef CONFIG_BINMAN
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ u-boot-spl-ddr {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
+ };
+
+ spl {
+ filename = "spl.bin";
+
+ mkimage {
+ args = "-n spl/u-boot-spl.cfgout -T imx8image -e 0x22020000";
+
+ blob {
+ filename = "u-boot-spl-ddr.bin";
+ };
+ };
+ };
+
+ u-boot-container {
+ filename = "u-boot-container.bin";
+
+ mkimage {
+ args = "-n u-boot-container.cfgout -T imx8image -e 0x0";
+
+ blob {
+ filename = "u-boot.bin";
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl: blob-ext@1 {
+ filename = "spl.bin";
+ offset = <0x0>;
+ align-size = <0x400>;
+ align = <0x400>;
+ };
+
+ uboot: blob-ext@2 {
+ filename = "u-boot-container.bin";
+ };
+ };
+};
+#endif
diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
index 467cac6..a067b0b 100644
--- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
@@ -78,6 +78,23 @@
};
};
+ tifsstub-gp {
+ filename = "tifsstub.bin_gp";
+ ti-secure-rom {
+ content = <&tifsstub_gp>;
+ core = "secure";
+ load = <0x60000>;
+ sw-rev = <CONFIG_K3_X509_SWRV>;
+ keyfile = "ti-degenerate-key.pem";
+ tifsstub;
+ };
+ tifsstub_gp: tifsstub-gp.bin {
+ filename = "ti-sysfw/ti-fs-stub-firmware-am62x-gp.bin";
+ type = "blob-ext";
+ optional;
+ };
+ };
+
ti-spl_unsigned {
filename = "tispl.bin_unsigned";
symlink = "tispl.bin";
@@ -115,6 +132,19 @@
};
};
+ tifsstub-gp {
+ description = "tifsstub";
+ type = "firmware";
+ arch = "arm32";
+ compression = "none";
+ os = "tifsstub-gp";
+ load = <0x9dc00000>;
+ entry = <0x9dc00000>;
+ blob-ext {
+ filename = "tifsstub.bin_gp";
+ };
+ };
+
dm {
description = "DM binary";
type = "firmware";
@@ -158,7 +188,8 @@
conf-0 {
description = "k3-am625-beagleplay";
firmware = "atf";
- loadables = "tee", "dm", "spl";
+ loadables = "tee", "dm", "spl",
+ "tifsstub-gp";
fdt = "fdt-0";
};
};
diff --git a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi
index dbee4aa..0961ca6 100644
--- a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi
+++ b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi
@@ -150,12 +150,107 @@
filename = "ti-dm/am62xx/ipc_echo_testb_mcu1_0_release_strip.xer5f";
};
};
+
+ tifsstub-hs {
+ filename = "tifsstub.bin_hs";
+ ti-secure-rom {
+ content = <&tifsstub_hs_cert>;
+ core = "secure";
+ load = <0x40000>;
+ sw-rev = <CONFIG_K3_X509_SWRV>;
+ keyfile = "custMpk.pem";
+ countersign;
+ tifsstub;
+ };
+ tifsstub_hs_cert: tifsstub-hs-cert.bin {
+ filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-cert.bin";
+ type = "blob-ext";
+ optional;
+ };
+ tifsstub_hs_enc: tifsstub-hs-enc.bin {
+ filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-enc.bin";
+ type = "blob-ext";
+ optional;
+ };
+ };
+
+ tifsstub-fs {
+ filename = "tifsstub.bin_fs";
+ tifsstub_fs_cert: tifsstub-fs-cert.bin {
+ filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-cert.bin";
+ type = "blob-ext";
+ optional;
+ };
+ tifsstub_fs_enc: tifsstub-fs-enc.bin {
+ filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-enc.bin";
+ type = "blob-ext";
+ optional;
+ };
+
+ };
+
+ tifsstub-gp {
+ filename = "tifsstub.bin_gp";
+ ti-secure-rom {
+ content = <&tifsstub_gp>;
+ core = "secure";
+ load = <0x60000>;
+ sw-rev = <CONFIG_K3_X509_SWRV>;
+ keyfile = "ti-degenerate-key.pem";
+ tifsstub;
+ };
+ tifsstub_gp: tifsstub-gp.bin {
+ filename = "ti-sysfw/ti-fs-stub-firmware-am62x-gp.bin";
+ type = "blob-ext";
+ optional;
+ };
+ };
+
+
ti-spl {
insert-template = <&ti_spl_template>;
fit {
images {
+ tifsstub-hs {
+ description = "TIFSSTUB";
+ type = "firmware";
+ arch = "arm32";
+ compression = "none";
+ os = "tifsstub-hs";
+ load = <0x9dc00000>;
+ entry = <0x9dc00000>;
+ blob-ext {
+ filename = "tifsstub.bin_hs";
+ };
+ };
+
+ tifsstub-fs {
+ description = "TIFSSTUB";
+ type = "firmware";
+ arch = "arm32";
+ compression = "none";
+ os = "tifsstub-fs";
+ load = <0x9dc00000>;
+ entry = <0x9dc00000>;
+ blob-ext {
+ filename = "tifsstub.bin_fs";
+ };
+ };
+
+ tifsstub-gp {
+ description = "TIFSSTUB";
+ type = "firmware";
+ arch = "arm32";
+ compression = "none";
+ os = "tifsstub-gp";
+ load = <0x9dc00000>;
+ entry = <0x9dc00000>;
+ blob-ext {
+ filename = "tifsstub.bin_gp";
+ };
+ };
dm {
ti-secure {
content = <&dm>;
@@ -187,7 +282,8 @@
conf-0 {
description = "k3-am625-phyboard-lyra-rdk";
firmware = "atf";
- loadables = "tee", "dm", "spl";
+ loadables = "tee", "tifsstub-hs", "tifsstub-fs",
+ "tifsstub-gp", "dm", "spl";
fdt = "fdt-0";
};
};
@@ -266,7 +362,8 @@
conf-0 {
description = "k3-am625-phyboard-lyra-rdk";
firmware = "atf";
- loadables = "tee", "dm", "spl";
+ loadables = "tee", "tifsstub-hs", "tifsstub-fs",
+ "tifsstub-gp", "dm", "spl";
fdt = "fdt-0";
};
};
diff --git a/arch/arm/dts/keystone-clocks.dtsi b/arch/arm/dts/keystone-clocks.dtsi
deleted file mode 100644
index 33742d8..0000000
--- a/arch/arm/dts/keystone-clocks.dtsi
+++ /dev/null
@@ -1,411 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Keystone 2 clock tree
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mainmuxclk: mainmuxclk@2310108 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-mux-clock";
- clocks = <&mainpllclk>, <&refclksys>;
- reg = <0x02310108 4>;
- bit-shift = <23>;
- bit-mask = <1>;
- clock-output-names = "mainmuxclk";
- };
-
- chipclk1: chipclk1 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&mainmuxclk>;
- clock-div = <1>;
- clock-mult = <1>;
- clock-output-names = "chipclk1";
- };
-
- chipclk1rstiso: chipclk1rstiso {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&mainmuxclk>;
- clock-div = <1>;
- clock-mult = <1>;
- clock-output-names = "chipclk1rstiso";
- };
-
- gemtraceclk: gemtraceclk@2310120 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-divider-clock";
- clocks = <&mainmuxclk>;
- reg = <0x02310120 4>;
- bit-shift = <0>;
- bit-mask = <8>;
- clock-output-names = "gemtraceclk";
- };
-
- chipstmxptclk: chipstmxptclk@2310164 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-divider-clock";
- clocks = <&mainmuxclk>;
- reg = <0x02310164 4>;
- bit-shift = <0>;
- bit-mask = <8>;
- clock-output-names = "chipstmxptclk";
- };
-
- chipclk12: chipclk12 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&chipclk1>;
- clock-div = <2>;
- clock-mult = <1>;
- clock-output-names = "chipclk12";
- };
-
- chipclk13: chipclk13 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&chipclk1>;
- clock-div = <3>;
- clock-mult = <1>;
- clock-output-names = "chipclk13";
- };
-
- paclk13: paclk13 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&papllclk>;
- clock-div = <3>;
- clock-mult = <1>;
- clock-output-names = "paclk13";
- };
-
- chipclk14: chipclk14 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&chipclk1>;
- clock-div = <4>;
- clock-mult = <1>;
- clock-output-names = "chipclk14";
- };
-
- chipclk16: chipclk16 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&chipclk1>;
- clock-div = <6>;
- clock-mult = <1>;
- clock-output-names = "chipclk16";
- };
-
- chipclk112: chipclk112 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&chipclk1>;
- clock-div = <12>;
- clock-mult = <1>;
- clock-output-names = "chipclk112";
- };
-
- chipclk124: chipclk124 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&chipclk1>;
- clock-div = <24>;
- clock-mult = <1>;
- clock-output-names = "chipclk114";
- };
-
- chipclk1rstiso13: chipclk1rstiso13 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&chipclk1rstiso>;
- clock-div = <3>;
- clock-mult = <1>;
- clock-output-names = "chipclk1rstiso13";
- };
-
- chipclk1rstiso14: chipclk1rstiso14 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&chipclk1rstiso>;
- clock-div = <4>;
- clock-mult = <1>;
- clock-output-names = "chipclk1rstiso14";
- };
-
- chipclk1rstiso16: chipclk1rstiso16 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&chipclk1rstiso>;
- clock-div = <6>;
- clock-mult = <1>;
- clock-output-names = "chipclk1rstiso16";
- };
-
- chipclk1rstiso112: chipclk1rstiso112 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&chipclk1rstiso>;
- clock-div = <12>;
- clock-mult = <1>;
- clock-output-names = "chipclk1rstiso112";
- };
-
- clkmodrst0: clkmodrst0@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk16>;
- clock-output-names = "modrst0";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
-
- clkusb: clkusb@2350008 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk16>;
- clock-output-names = "usb";
- reg = <0x02350008 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkaemifspi: clkaemifspi@235000c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk16>;
- clock-output-names = "aemif-spi";
- reg = <0x0235000c 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
-
- clkdebugsstrc: clkdebugsstrc@2350014 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "debugss-trc";
- reg = <0x02350014 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <1>;
- };
-
- clktetbtrc: clktetbtrc@2350018 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tetb-trc";
- reg = <0x02350018 0xb00>, <0x02350004 0x400>;
- reg-names = "control", "domain";
- domain-id = <1>;
- };
-
- clkpa: clkpa@235001c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&paclk13>;
- clock-output-names = "pa";
- reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
- reg-names = "control", "domain";
- domain-id = <2>;
- };
-
- clkcpgmac: clkcpgmac@2350020 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkpa>;
- clock-output-names = "cpgmac";
- reg = <0x02350020 0xb00>, <0x02350008 0x400>;
- reg-names = "control", "domain";
- domain-id = <2>;
- };
-
- clksa: clksa@2350024 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkpa>;
- clock-output-names = "sa";
- reg = <0x02350024 0xb00>, <0x02350008 0x400>;
- reg-names = "control", "domain";
- domain-id = <2>;
- };
-
- clkpcie: clkpcie@2350028 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk12>;
- clock-output-names = "pcie";
- reg = <0x02350028 0xb00>, <0x0235000c 0x400>;
- reg-names = "control", "domain";
- domain-id = <3>;
- };
-
- clksr: clksr@2350034 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1rstiso112>;
- clock-output-names = "sr";
- reg = <0x02350034 0xb00>, <0x02350018 0x400>;
- reg-names = "control", "domain";
- domain-id = <6>;
- };
-
- clkgem0: clkgem0@235003c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem0";
- reg = <0x0235003c 0xb00>, <0x02350020 0x400>;
- reg-names = "control", "domain";
- domain-id = <8>;
- };
-
- clkddr30: clkddr30@235005c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk12>;
- clock-output-names = "ddr3-0";
- reg = <0x0235005c 0xb00>, <0x02350040 0x400>;
- reg-names = "control", "domain";
- domain-id = <16>;
- };
-
- clkwdtimer0: clkwdtimer0@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "timer0";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkwdtimer1: clkwdtimer1@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "timer1";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkwdtimer2: clkwdtimer2@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "timer2";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkwdtimer3: clkwdtimer3@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "timer3";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clktimer15: clktimer15@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "timer15";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkuart0: clkuart0@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "uart0";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkuart1: clkuart1@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "uart1";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkaemif: clkaemif@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkaemifspi>;
- clock-output-names = "aemif";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkusim: clkusim@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "usim";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clki2c: clki2c@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "i2c";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkspi: clkspi@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkaemifspi>;
- clock-output-names = "spi";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkgpio: clkgpio@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "gpio";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkkeymgr: clkkeymgr@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "keymgr";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-};
diff --git a/arch/arm/dts/keystone-k2e-clocks.dtsi b/arch/arm/dts/keystone-k2e-clocks.dtsi
deleted file mode 100644
index 46f8ab3..0000000
--- a/arch/arm/dts/keystone-k2e-clocks.dtsi
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Edison SoC specific device tree
- *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-clocks {
- mainpllclk: mainpllclk@2310110 {
- #clock-cells = <0>;
- compatible = "ti,keystone,main-pll-clock";
- clocks = <&refclksys>;
- reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
- reg-names = "control", "multiplier", "post-divider";
- };
-
- papllclk: papllclk@2620358 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclkpass>;
- clock-output-names = "papllclk";
- reg = <0x02620358 4>;
- reg-names = "control";
- };
-
- ddr3apllclk: ddr3apllclk@2620360 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclkddr3a>;
- clock-output-names = "ddr-3a-pll-clk";
- reg = <0x02620360 4>;
- reg-names = "control";
- };
-
- clkusb1: clkusb1@2350004 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk16>;
- clock-output-names = "usb1";
- reg = <0x02350004 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkhyperlink0: clkhyperlink0@2350030 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk12>;
- clock-output-names = "hyperlink-0";
- reg = <0x02350030 0xb00>, <0x02350014 0x400>;
- reg-names = "control", "domain";
- domain-id = <5>;
- };
-
- clkpcie1: clkpcie1@235006c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk12>;
- clock-output-names = "pcie1";
- reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
- reg-names = "control", "domain";
- domain-id = <18>;
- };
-
- clkxge: clkxge@23500c8 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "xge";
- reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
- reg-names = "control", "domain";
- domain-id = <29>;
- };
-};
diff --git a/arch/arm/dts/keystone-k2e-evm-u-boot.dtsi b/arch/arm/dts/keystone-k2e-evm-u-boot.dtsi
index 953c750..e77c53d 100644
--- a/arch/arm/dts/keystone-k2e-evm-u-boot.dtsi
+++ b/arch/arm/dts/keystone-k2e-evm-u-boot.dtsi
@@ -4,15 +4,23 @@
*/
/{
- soc {
- bootph-all;
- };
aliases {
usb0 = &usb;
usb1 = &usb1;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ };
+
+ chosen {
+ stdout-path = &uart0;
};
};
+&soc0 {
+ bootph-all;
+};
+
&i2c1 {
bootph-all;
};
diff --git a/arch/arm/dts/keystone-k2e-evm.dts b/arch/arm/dts/keystone-k2e-evm.dts
deleted file mode 100644
index bf88444..0000000
--- a/arch/arm/dts/keystone-k2e-evm.dts
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Edison EVM device tree
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "keystone-k2e.dtsi"
-
-/ {
- compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone";
- model = "Texas Instruments Keystone 2 Edison EVM";
-
- soc {
-
- clocks {
- refclksys: refclksys {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
- clock-output-names = "refclk-sys";
- };
-
- refclkpass: refclkpass {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
- clock-output-names = "refclk-pass";
- };
-
- refclkddr3a: refclkddr3a {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
- clock-output-names = "refclk-ddr3a";
- };
- };
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
-
-&i2c0 {
- dtt@50 {
- compatible = "at,24c1024";
- reg = <0x50>;
- };
-};
-
-&aemif {
- cs0 {
- #address-cells = <2>;
- #size-cells = <1>;
- clock-ranges;
- ranges;
-
- ti,cs-chipselect = <0>;
- /* all timings in nanoseconds */
- ti,cs-min-turnaround-ns = <12>;
- ti,cs-read-hold-ns = <6>;
- ti,cs-read-strobe-ns = <23>;
- ti,cs-read-setup-ns = <9>;
- ti,cs-write-hold-ns = <8>;
- ti,cs-write-strobe-ns = <23>;
- ti,cs-write-setup-ns = <8>;
-
- nand@0,0 {
- compatible = "ti,keystone-nand","ti,davinci-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0 0 0x4000000
- 1 0 0x0000100>;
-
- ti,davinci-chipselect = <0>;
- ti,davinci-mask-ale = <0x2000>;
- ti,davinci-mask-cle = <0x4000>;
- ti,davinci-mask-chipsel = <0>;
- nand-ecc-mode = "hw";
- ti,davinci-ecc-bits = <4>;
- nand-on-flash-bbt;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "params";
- reg = <0x100000 0x80000>;
- read-only;
- };
-
- partition@180000 {
- label = "ubifs";
- reg = <0x180000 0x1FE80000>;
- };
- };
- };
-};
-
-&spi0 {
- status = "okay";
- nor_flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "Micron,n25q128a11", "jedec,spi-nor";
- spi-max-frequency = <54000000>;
- m25p,fast-read;
- reg = <0>;
-
- partition@0 {
- label = "u-boot-spl";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@1 {
- label = "misc";
- reg = <0x80000 0xf80000>;
- };
- };
-};
-
-&mdio {
- status = "okay";
- ethphy0: ethernet-phy@0 {
- compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@1 {
- compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
diff --git a/arch/arm/dts/keystone-k2e-netcp.dtsi b/arch/arm/dts/keystone-k2e-netcp.dtsi
deleted file mode 100644
index dd61503..0000000
--- a/arch/arm/dts/keystone-k2e-netcp.dtsi
+++ /dev/null
@@ -1,203 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Keystone 2 Edison Netcp driver
- *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-qmss: qmss@2a40000 {
- compatible = "ti,keystone-navigator-qmss";
- dma-coherent;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&chipclk13>;
- ranges;
- queue-range = <0 0x2000>;
- linkram0 = <0x100000 0x4000>;
- linkram1 = <0 0x10000>;
-
- qmgrs {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- qmgr0 {
- managed-queues = <0 0x2000>;
- reg = <0x2a40000 0x20000>,
- <0x2a06000 0x400>,
- <0x2a02000 0x1000>,
- <0x2a03000 0x1000>,
- <0x23a80000 0x20000>,
- <0x2a80000 0x20000>;
- reg-names = "peek", "status", "config",
- "region", "push", "pop";
- };
- };
- queue-pools {
- qpend {
- qpend-0 {
- qrange = <658 8>;
- interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
- 0 43 0xf04 0 44 0xf04 0 45 0xf04
- 0 46 0xf04 0 47 0xf04>;
- };
- qpend-1 {
- qrange = <528 16>;
- interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
- 0 51 0xf04 0 52 0xf04 0 53 0xf04
- 0 54 0xf04 0 55 0xf04 0 56 0xf04
- 0 57 0xf04 0 58 0xf04 0 59 0xf04
- 0 60 0xf04 0 61 0xf04 0 62 0xf04
- 0 63 0xf04>;
- qalloc-by-id;
- };
- qpend-2 {
- qrange = <544 16>;
- interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
- 0 59 0xf04 0 68 0xf04 0 69 0xf04
- 0 70 0xf04 0 71 0xf04 0 72 0xf04
- 0 73 0xf04 0 74 0xf04 0 75 0xf04
- 0 76 0xf04 0 77 0xf04 0 78 0xf04
- 0 79 0xf04>;
- };
- };
- general-purpose {
- gp-0 {
- qrange = <4000 64>;
- };
- netcp-tx {
- qrange = <896 128>;
- qalloc-by-id;
- };
- };
- };
- descriptor-regions {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- region-12 {
- id = <12>;
- region-spec = <8192 128>; /* num_desc desc_size */
- link-index = <0x4000>;
- };
- };
-}; /* qmss */
-
-knav_dmas: knav_dmas@0 {
- compatible = "ti,keystone-navigator-dma";
- clocks = <&papllclk>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- ti,navigator-cloud-address = <0x23a80000 0x23a90000
- 0x23a80000 0x23a90000>;
-
- dma_gbe: dma_gbe@0 {
- reg = <0x24186000 0x100>,
- <0x24187000 0x2a0>,
- <0x24188000 0xb60>,
- <0x24186100 0x80>,
- <0x24189000 0x1000>;
- reg-names = "global", "txchan", "rxchan",
- "txsched", "rxflow";
- };
-};
-
-netcp: netcp@24000000 {
- reg = <0x2620110 0x8>;
- reg-names = "efuse";
- compatible = "ti,netcp-1.0";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* NetCP address range */
- ranges = <0 0x24000000 0x1000000>;
-
- clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
- dma-coherent;
-
- ti,navigator-dmas = <&dma_gbe 0>,
- <&dma_gbe 8>,
- <&dma_gbe 0>;
- ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
-
- netcp-devices {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- gbe@200000 { /* ETHSS */
- label = "netcp-gbe";
- compatible = "ti,netcp-gbe-9";
- reg = <0x200000 0x900>, <0x220000 0x20000>;
- /* enable-ale; */
- tx-queue = <896>;
- tx-channel = "nettx";
-
- interfaces {
- gbe0: interface-0 {
- slave-port = <0>;
- link-interface = <1>;
- phy-handle = <ðphy0>;
- };
- gbe1: interface-1 {
- slave-port = <1>;
- link-interface = <1>;
- phy-handle = <ðphy1>;
- };
- };
-
- secondary-slave-ports {
- port-2 {
- slave-port = <2>;
- link-interface = <2>;
- };
- port-3 {
- slave-port = <3>;
- link-interface = <2>;
- };
- port-4 {
- slave-port = <4>;
- link-interface = <2>;
- };
- port-5 {
- slave-port = <5>;
- link-interface = <2>;
- };
- port-6 {
- slave-port = <6>;
- link-interface = <2>;
- };
- port-7 {
- slave-port = <7>;
- link-interface = <2>;
- };
- };
- };
- };
-
- netcp-interfaces {
- interface-0 {
- rx-channel = "netrx0";
- rx-pool = <1024 12>;
- tx-pool = <1024 12>;
- rx-queue-depth = <128 128 0 0>;
- rx-buffer-size = <1518 4096 0 0>;
- rx-queue = <528>;
- tx-completion-queue = <530>;
- efuse-mac = <1>;
- netcp-gbe = <&gbe0>;
-
- };
- interface-1 {
- rx-channel = "netrx1";
- rx-pool = <1024 12>;
- tx-pool = <1024 12>;
- rx-queue-depth = <128 128 0 0>;
- rx-buffer-size = <1518 4096 0 0>;
- rx-queue = <529>;
- tx-completion-queue = <531>;
- efuse-mac = <0>;
- local-mac-address = [02 18 31 7e 3e 00];
- netcp-gbe = <&gbe1>;
- };
- };
-};
diff --git a/arch/arm/dts/keystone-k2e.dtsi b/arch/arm/dts/keystone-k2e.dtsi
deleted file mode 100644
index 449cddc..0000000
--- a/arch/arm/dts/keystone-k2e.dtsi
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Edison soc device tree
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/ {
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&gic>;
-
- cpu@0 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <0>;
- };
-
- cpu@1 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <1>;
- };
-
- cpu@2 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <2>;
- };
-
- cpu@3 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <3>;
- };
- };
-
- soc {
- /include/ "keystone-k2e-clocks.dtsi"
-
- usb: usb@2680000 {
- interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
- usb@2690000 {
- interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
- };
- };
-
- usb1_phy: usb_phy@2620750 {
- compatible = "ti,keystone-usbphy";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x2620750 24>;
- status = "disabled";
- };
-
- usb1: usb@25000000 {
- compatible = "ti,keystone-dwc3";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x25000000 0x10000>;
- clocks = <&clkusb1>;
- clock-names = "usb";
- interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
- ranges;
- dma-coherent;
- dma-ranges;
- status = "disabled";
-
- usb@25010000 {
- compatible = "synopsys,dwc3";
- reg = <0x25010000 0x70000>;
- interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
- usb-phy = <&usb1_phy>, <&usb1_phy>;
- };
- };
-
- dspgpio0: keystone_dsp_gpio@02620240 {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x240>;
- };
-
- pcie1: pcie@21020000 {
- compatible = "ti,keystone-pcie","snps,dw-pcie";
- clocks = <&clkpcie1>;
- clock-names = "pcie";
- #address-cells = <3>;
- #size-cells = <2>;
- reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
- ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
- 0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
-
- status = "disabled";
- device_type = "pci";
- num-lanes = <2>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
- <0 0 0 2 &pcie_intc1 1>, /* INT B */
- <0 0 0 3 &pcie_intc1 2>, /* INT C */
- <0 0 0 4 &pcie_intc1 3>; /* INT D */
-
- pcie_msi_intc1: msi-interrupt-controller {
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 379 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 380 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 381 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 382 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 383 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 384 IRQ_TYPE_EDGE_RISING>;
- };
-
- pcie_intc1: legacy-interrupt-controller {
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
- };
- };
-
- mdio: mdio@24200f00 {
- compatible = "ti,keystone_mdio", "ti,davinci_mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x24200f00 0x100>;
- status = "disabled";
- clocks = <&clkcpgmac>;
- clock-names = "fck";
- bus_freq = <2500000>;
- };
- /include/ "keystone-k2e-netcp.dtsi"
- };
-};
diff --git a/arch/arm/dts/keystone-k2g-evm-u-boot.dtsi b/arch/arm/dts/keystone-k2g-evm-u-boot.dtsi
index 72b67b2..19c78c9 100644
--- a/arch/arm/dts/keystone-k2g-evm-u-boot.dtsi
+++ b/arch/arm/dts/keystone-k2g-evm-u-boot.dtsi
@@ -4,20 +4,34 @@
*/
/{
- soc {
- bootph-all;
- };
aliases {
usb0 = &usb0;
usb1 = &usb1;
};
+
+ chosen {
+ stdout-path = &uart0;
+ };
+};
+
+&soc0 {
+ bootph-all;
+
+ pmmc@2900000 {
+ bootph-all;
+ compatible = "ti,power-processor";
+ reg = <0x02900000 0x40000>;
+ ti,lpsc_module = <1>;
+ };
};
&i2c0 {
+ status = "okay";
bootph-all;
};
&i2c1 {
+ status = "okay";
bootph-all;
};
diff --git a/arch/arm/dts/keystone-k2g-evm.dts b/arch/arm/dts/keystone-k2g-evm.dts
deleted file mode 100644
index 491fdc4..0000000
--- a/arch/arm/dts/keystone-k2g-evm.dts
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for K2G EVM
- *
- * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "keystone-k2g.dtsi"
-
-/ {
- compatible = "ti,k2g-evm","ti,keystone";
- model = "Texas Instruments K2G General Purpose EVM";
-
- chosen {
- stdout-path = &uart0;
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x80000000>;
- };
-};
-
-&mdio {
- status = "okay";
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-&keystone_usb0 {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb0 {
- dr_mode = "host";
- status = "okay";
-};
-
-&keystone_usb1 {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb1 {
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&gbe0 {
- phy-handle = <ðphy0>;
-};
-
-&netcp {
- status = "okay";
-};
-
-&spi1 {
- status = "okay";
-
- spi_nor: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- m25p,fast-read;
- reg = <0>;
-
- partition@0 {
- label = "u-boot-spl";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@1 {
- label = "misc";
- reg = <0x80000 0xf80000>;
- };
- };
-};
-
-&qspi {
- status = "okay";
-
- flash0: flash@0 {
- compatible = "s25fl512s", "jedec,spi-nor";
- reg = <0>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <4>;
- spi-max-frequency = <96000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- cdns,tshsl-ns = <392>;
- cdns,tsd2d-ns = <392>;
- cdns,tchsh-ns = <100>;
- cdns,tslch-ns = <100>;
- block-size = <18>;
-
- partition@0 {
- label = "QSPI.u-boot-spl-os";
- reg = <0x00000000 0x00100000>;
- };
- partition@1 {
- label = "QSPI.u-boot-env";
- reg = <0x00100000 0x00040000>;
- };
- partition@2 {
- label = "QSPI.skern";
- reg = <0x00140000 0x0040000>;
- };
- partition@3 {
- label = "QSPI.pmmc-firmware";
- reg = <0x00180000 0x0040000>;
- };
- partition@4 {
- label = "QSPI.kernel";
- reg = <0x001C0000 0x0800000>;
- };
- partition@5 {
- label = "QSPI.file-system";
- reg = <0x009C0000 0x3640000>;
- };
- };
-};
-
-&mmc0 {
- status = "okay";
-};
-
-&mmc1 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-};
diff --git a/arch/arm/dts/keystone-k2g-generic-u-boot.dtsi b/arch/arm/dts/keystone-k2g-generic-u-boot.dtsi
deleted file mode 100644
index 3634ed7..0000000
--- a/arch/arm/dts/keystone-k2g-generic-u-boot.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/{
- soc {
- bootph-all;
- };
-};
-
-&i2c0 {
- bootph-all;
-};
-
-&i2c1 {
- bootph-all;
-};
diff --git a/arch/arm/dts/keystone-k2g-generic.dts b/arch/arm/dts/keystone-k2g-generic.dts
deleted file mode 100644
index dc6c31a..0000000
--- a/arch/arm/dts/keystone-k2g-generic.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Device Tree Source for Generic 66AK2G0X EVM
- *
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/dts-v1/;
-
-#include "keystone-k2g.dtsi"
-
-/ {
- compatible = "ti,k2g-generic", "ti,k2g", "ti,keystone";
- model = "Texas Instruments 66AK2G02 Generic";
-
- chosen {
- stdout-path = &uart0;
- };
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-};
diff --git a/arch/arm/dts/keystone-k2g-ice-u-boot.dtsi b/arch/arm/dts/keystone-k2g-ice-u-boot.dtsi
index 3634ed7..1527446 100644
--- a/arch/arm/dts/keystone-k2g-ice-u-boot.dtsi
+++ b/arch/arm/dts/keystone-k2g-ice-u-boot.dtsi
@@ -4,15 +4,28 @@
*/
/{
- soc {
+ chosen {
+ stdout-path = &uart0;
+ };
+};
+
+&soc0 {
+ bootph-all;
+
+ pmmc@2900000 {
bootph-all;
+ compatible = "ti,power-processor";
+ reg = <0x02900000 0x40000>;
+ ti,lpsc_module = <1>;
};
};
&i2c0 {
+ status = "okay";
bootph-all;
};
&i2c1 {
+ status = "okay";
bootph-all;
};
diff --git a/arch/arm/dts/keystone-k2g-ice.dts b/arch/arm/dts/keystone-k2g-ice.dts
deleted file mode 100644
index b898ae6..0000000
--- a/arch/arm/dts/keystone-k2g-ice.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for K2G Industrial Communication Engine EVM
- *
- * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "keystone-k2g.dtsi"
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
- compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone";
- model = "Texas Instruments K2G Industrial Communication EVM";
-
- chosen {
- stdout-path = &uart0;
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x20000000>;
- };
-};
-
-&mmc1 {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&qspi {
- status = "okay";
-
- flash0: flash@0 {
- compatible = "s25fl256s1", "jedec,spi-nor";
- reg = <0>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <4>;
- spi-max-frequency = <96000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- cdns,read-delay = <5>;
- cdns,tshsl-ns = <500>;
- cdns,tsd2d-ns = <500>;
- cdns,tchsh-ns = <119>;
- cdns,tslch-ns = <119>;
-
- partition@0 {
- label = "QSPI.u-boot";
- reg = <0x00000000 0x00100000>;
- };
- partition@1 {
- label = "QSPI.u-boot-env";
- reg = <0x00100000 0x00040000>;
- };
- partition@2 {
- label = "QSPI.skern";
- reg = <0x00140000 0x0040000>;
- };
- partition@3 {
- label = "QSPI.pmmc-firmware";
- reg = <0x00180000 0x0040000>;
- };
- partition@4 {
- label = "QSPI.kernel";
- reg = <0x001c0000 0x0800000>;
- };
- partition@5 {
- label = "QSPI.u-boot-spl-os";
- reg = <0x009c0000 0x0040000>;
- };
- partition@6 {
- label = "QSPI.file-system";
- reg = <0x00a00000 0x1600000>;
- };
- };
-};
-
-&qmss {
- status = "okay";
-};
-
-&knav_dmas {
- status = "okay";
-};
-
-&netcp {
- pinctrl-names = "default";
- //pinctrl-0 = <&emac_pins>;
- status = "okay";
-};
-
-&mdio {
- pinctrl-names = "default";
- //pinctrl-0 = <&mdio_pins>;
- status = "okay";
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
- ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
- ti,min-output-impedance;
- ti,dp83867-rxctrl-strap-quirk;
- };
-};
-
-&gbe0 {
- phy-handle = <ðphy0>;
- phy-mode = "rgmii-id";
- status = "okay";
-};
diff --git a/arch/arm/dts/keystone-k2g-netcp.dtsi b/arch/arm/dts/keystone-k2g-netcp.dtsi
deleted file mode 100644
index 2afb488..0000000
--- a/arch/arm/dts/keystone-k2g-netcp.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for K2G Netcp driver
- *
- * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-qmss: qmss@4020000 {
- compatible = "ti,keystone-navigator-qmss-l";
- dma-coherent;
- #address-cells = <1>;
- #size-cells = <1>;
- /* power-domains = <&k2g_pds K2G_DEV_NSS0>; */
- /* clocks = <&k2g_clks K2G_DEV_NSS0 K2G_DEV_NSS_VCLK>; */
- clock-names = "nss_vclk";
- ranges;
- queue-range = <0 0x80>;
- linkram0 = <0x4020000 0x7ff>;
-
- qmgrs {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- qmgr0 {
- managed-queues = <0 0x80>;
- reg = <0x4100000 0x800>,
- <0x4040000 0x100>,
- <0x4080000 0x800>,
- <0x40c0000 0x800>;
- reg-names = "peek", "config",
- "region", "push";
- };
-
- };
- queue-pools {
- qpend {
- qpend-0 {
- qrange = <77 8>;
- interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
- 0 311 0xf04 0 312 0xf04 0 313 0xf04
- 0 314 0xf04 0 315 0xf04>;
- qalloc-by-id;
- };
- };
- general-purpose {
- gp-0 {
- qrange = <112 8>;
- };
- netcp-tx {
- qrange = <5 8>;
- qalloc-by-id;
- };
- };
- };
-
- descriptor-regions {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- region-12 {
- id = <12>;
- region-spec = <1023 128>; /* num_desc desc_size */
- link-index = <0x400>;
- };
- };
-}; /* qmss */
-
-knav_dmas: knav_dmas@0 {
- compatible = "ti,keystone-navigator-dma";
- #address-cells = <1>;
- #size-cells = <1>;
- /* power-domains = <&k2g_pds K2G_DEV_NSS0>; */
- /* clocks = <&k2g_clks K2G_DEV_NSS0 K2G_DEV_NSS_VCLK>; */
- clock-names = "nss_vclk";
- ranges;
- ti,navigator-cloud-address = <0x40c0000 0x40c0000 0x40c0000 0x40c0000>;
-
- dma_gbe: dma_gbe@0 {
- reg = <0x4010000 0x100>,
- <0x4011000 0x2a0>, /* 21 Tx channels */
- <0x4012000 0x400>, /* 32 Rx channels */
- <0x4010100 0x80>,
- <0x4013000 0x400>; /* 32 Rx flows */
- reg-names = "global", "txchan", "rxchan",
- "txsched", "rxflow";
- };
-
-};
-
-gbe_subsys: subsys@4200000 {
- compatible = "syscon";
- reg = <0x4200000 0x100>;
-};
-
-netcp: netcp@4000000 {
- reg = <0x2620110 0x8>;
- reg-names = "efuse";
- compatible = "ti,netcp-1.0";
- #address-cells = <1>;
- #size-cells = <1>;
- status = "disabled";
- /* power-domains = <&k2g_pds K2G_DEV_NSS0>; */
- /* clocks = <&k2g_clks K2G_DEV_NSS0 K2G_DEV_NSS_ESW_CLK>; */
- clock-names = "ethss_clk";
-
- /* NetCP address range */
- ranges = <0 0x4000000 0x1000000>;
-
- dma-coherent;
-
- ti,navigator-dmas = <&dma_gbe 0>, <&dma_gbe 5>;
- ti,navigator-dma-names = "netrx0", "nettx";
-
- netcp-devices {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- gbe@200000 {
- label = "netcp-gbe";
- compatible = "ti,netcp-gbe-2";
- syscon-subsys = <&gbe_subsys>;
- reg = <0x200100 0xe00>, <0x220000 0x20000>;
- /* enable-ale; */
- tx-queue = <5>;
- tx-channel = "nettx";
-
- interfaces {
- gbe0: interface-0 {
- slave-port = <0>;
- link-interface = <5>;
- };
- };
- };
- };
-
- netcp-interfaces {
- interface-0 {
- rx-channel = "netrx0";
- rx-pool = <512 12>;
- tx-pool = <511 12>;
- rx-queue-depth = <128 128 0 0>;
- rx-buffer-size = <1518 4096 0 0>;
- rx-queue = <77>;
- tx-completion-queue = <78>;
- efuse-mac = <1>;
- netcp-gbe = <&gbe0>;
- };
- };
-};
diff --git a/arch/arm/dts/keystone-k2g.dtsi b/arch/arm/dts/keystone-k2g.dtsi
deleted file mode 100644
index 5c3ff12..0000000
--- a/arch/arm/dts/keystone-k2g.dtsi
+++ /dev/null
@@ -1,258 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for K2G SOC
- *
- * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- model = "Texas Instruments K2G SoC";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&gic>;
-
- chosen { };
-
- aliases {
- serial0 = &uart0;
- spi0 = &spi0;
- spi1 = &spi1;
- spi2 = &spi2;
- spi3 = &spi3;
- spi4 = &qspi;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&gic>;
-
- cpu@0 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <0>;
- };
- };
-
- gic: interrupt-controller@2561000 {
- compatible = "arm,cortex-a15-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x0 0x02561000 0x0 0x1000>,
- <0x0 0x02562000 0x0 0x2000>,
- <0x0 0x02564000 0x0 0x1000>,
- <0x0 0x02566000 0x0 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "ti,keystone","simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- uart0: serial@02530c00 {
- compatible = "ns16550a";
- current-speed = <115200>;
- reg-shift = <2>;
- reg-io-width = <4>;
- reg = <0x02530c00 0x100>;
- clock-names = "uart";
- interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
- };
-
- mdio: mdio@4200f00 {
- compatible = "ti,keystone_mdio", "ti,davinci_mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- /* power-domains = <&k2g_pds K2G_DEV_NSS0>; */
- /* clocks = <&k2g_clks K2G_DEV_NSS0 K2G_DEV_NSS_ESW_CLK>; */
- clock-names = "fck";
- reg = <0x04200f00 0x100>;
- status = "disabled";
- bus_freq = <2500000>;
- };
-
- qspi: qspi@2940000 {
- compatible = "cdns,qspi-nor";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x02940000 0x1000>,
- <0x24000000 0x4000000>;
- interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
- num-cs = <4>;
- cdns,fifo-depth = <256>;
- cdns,fifo-width = <4>;
- cdns,trigger-address = <0x24000000>;
- status = "disabled";
- };
-
- #include "keystone-k2g-netcp.dtsi"
-
- pmmc: pmmc@2900000 {
- compatible = "ti,power-processor";
- reg = <0x02900000 0x40000>;
- ti,lpsc_module = <1>;
- };
-
- spi0: spi@21805400 {
- compatible = "ti,keystone-spi", "ti,dm6441-spi";
- reg = <0x21805400 0x200>;
- num-cs = <4>;
- ti,davinci-spi-intr-line = <0>;
- interrupts = <GIC_SPI 64 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi1: spi@21805800 {
- compatible = "ti,keystone-spi", "ti,dm6441-spi";
- reg = <0x21805800 0x200>;
- num-cs = <4>;
- ti,davinci-spi-intr-line = <0>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi2: spi@21805c00 {
- compatible = "ti,keystone-spi", "ti,dm6441-spi";
- reg = <0x21805C00 0x200>;
- num-cs = <4>;
- ti,davinci-spi-intr-line = <0>;
- interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi3: spi@21806000 {
- compatible = "ti,keystone-spi", "ti,dm6441-spi";
- reg = <0x21806000 0x200>;
- num-cs = <4>;
- ti,davinci-spi-intr-line = <0>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
- i2c0: i2c@2530000 {
- compatible = "ti,keystone-i2c";
- reg = <0x02530000 0x400>;
- clock-frequency = <100000>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c1: i2c@2530400 {
- compatible = "ti,keystone-i2c";
- reg = <0x02530400 0x400>;
- clock-frequency = <100000>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c2: i2c@2530800 {
- compatible = "ti,keystone-i2c";
- reg = <0x02530800 0x400>;
- clock-frequency = <100000>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- mmc0: mmc@23000000 {
- compatible = "ti,omap4-hsmmc";
- reg = <0x23000000 0x400>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
- bus-width = <4>;
- ti,needs-special-reset;
- no-1-8-v;
- max-frequency = <96000000>;
- status = "disabled";
- };
-
- mmc1: mmc@23100000 {
- compatible = "ti,omap4-hsmmc";
- reg = <0x23100000 0x400>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
- bus-width = <8>;
- ti,needs-special-reset;
- ti,non-removable;
- max-frequency = <96000000>;
- status = "disabled";
- clock-names = "fck";
- };
-
- usb0_phy: usb-phy@0 {
- compatible = "usb-nop-xceiv";
- status = "disabled";
- };
-
- keystone_usb0: keystone-dwc3@2680000 {
- compatible = "ti,keystone-dwc3";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x2680000 0x10000>;
- interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
- ranges;
- dma-coherent;
- dma-ranges;
- status = "disabled";
- /*power-domains = <&k2g_pds 0x0016>;*/
-
- usb0: usb@2690000 {
- compatible = "snps,dwc3";
- reg = <0x2690000 0x10000>;
- interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
- maximum-speed = "high-speed";
- dr_mode = "otg";
- /*usb-phy = <&usb0_phy>;*/
- status = "disabled";
- };
- };
-
- usb1_phy: usb-phy@1 {
- compatible = "usb-nop-xceiv";
- status = "disabled";
- };
-
- keystone_usb1: keystone-dwc3@2580000 {
- compatible = "ti,keystone-dwc3";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x2580000 0x10000>;
- interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
- ranges;
- dma-coherent;
- dma-ranges;
- status = "disabled";
- /*power-domains = <&k2g_pds 0x0017>;*/
-
- usb1: usb@2590000 {
- compatible = "snps,dwc3";
- reg = <0x2590000 0x10000>;
- interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
- maximum-speed = "high-speed";
- dr_mode = "otg";
- /*usb-phy = <&usb1_phy>;*/
- status = "disabled";
- };
- };
- };
-};
diff --git a/arch/arm/dts/keystone-k2hk-clocks.dtsi b/arch/arm/dts/keystone-k2hk-clocks.dtsi
deleted file mode 100644
index 3ca4722..0000000
--- a/arch/arm/dts/keystone-k2hk-clocks.dtsi
+++ /dev/null
@@ -1,422 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Kepler/Hawking SoC clock nodes
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-clocks {
- armpllclk: armpllclk@2620370 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclkarm>;
- clock-output-names = "arm-pll-clk";
- reg = <0x02620370 4>;
- reg-names = "control";
- };
-
- mainpllclk: mainpllclk@2310110 {
- #clock-cells = <0>;
- compatible = "ti,keystone,main-pll-clock";
- clocks = <&refclksys>;
- reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
- reg-names = "control", "multiplier", "post-divider";
- };
-
- papllclk: papllclk@2620358 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclkpass>;
- clock-output-names = "papllclk";
- reg = <0x02620358 4>;
- reg-names = "control";
- };
-
- ddr3apllclk: ddr3apllclk@2620360 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclkddr3a>;
- clock-output-names = "ddr-3a-pll-clk";
- reg = <0x02620360 4>;
- reg-names = "control";
- };
-
- ddr3bpllclk: ddr3bpllclk@2620368 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclkddr3b>;
- clock-output-names = "ddr-3b-pll-clk";
- reg = <0x02620368 4>;
- reg-names = "control";
- };
-
- clktsip: clktsip@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk16>;
- clock-output-names = "tsip";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clksrio: clksrio@235002c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1rstiso13>;
- clock-output-names = "srio";
- reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
- reg-names = "control", "domain";
- domain-id = <4>;
- };
-
- clkhyperlink0: clkhyperlink0@2350030 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk12>;
- clock-output-names = "hyperlink-0";
- reg = <0x02350030 0xb00>, <0x02350014 0x400>;
- reg-names = "control", "domain";
- domain-id = <5>;
- };
-
- clkgem1: clkgem1@2350040 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem1";
- reg = <0x02350040 0xb00>, <0x02350024 0x400>;
- reg-names = "control", "domain";
- domain-id = <9>;
- };
-
- clkgem2: clkgem2@2350044 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem2";
- reg = <0x02350044 0xb00>, <0x02350028 0x400>;
- reg-names = "control", "domain";
- domain-id = <10>;
- };
-
- clkgem3: clkgem3@2350048 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem3";
- reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
- reg-names = "control", "domain";
- domain-id = <11>;
- };
-
- clkgem4: clkgem4@235004c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem4";
- reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
- reg-names = "control", "domain";
- domain-id = <12>;
- };
-
- clkgem5: clkgem5@2350050 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem5";
- reg = <0x02350050 0xb00>, <0x02350034 0x400>;
- reg-names = "control", "domain";
- domain-id = <13>;
- };
-
- clkgem6: clkgem6@2350054 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem6";
- reg = <0x02350054 0xb00>, <0x02350038 0x400>;
- reg-names = "control", "domain";
- domain-id = <14>;
- };
-
- clkgem7: clkgem7@2350058 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem7";
- reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
- reg-names = "control", "domain";
- domain-id = <15>;
- };
-
- clkddr31: clkddr31@2350060 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "ddr3-1";
- reg = <0x02350060 0xb00>, <0x02350040 0x400>;
- reg-names = "control", "domain";
- domain-id = <16>;
- };
-
- clktac: clktac@2350064 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tac";
- reg = <0x02350064 0xb00>, <0x02350044 0x400>;
- reg-names = "control", "domain";
- domain-id = <17>;
- };
-
- clkrac01: clkrac01@2350068 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "rac-01";
- reg = <0x02350068 0xb00>, <0x02350044 0x400>;
- reg-names = "control", "domain";
- domain-id = <17>;
- };
-
- clkrac23: clkrac23@235006c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "rac-23";
- reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
- reg-names = "control", "domain";
- domain-id = <18>;
- };
-
- clkfftc0: clkfftc0@2350070 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-0";
- reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
- reg-names = "control", "domain";
- domain-id = <19>;
- };
-
- clkfftc1: clkfftc1@2350074 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-1";
- reg = <0x02350074 0xb00>, <0x0235004c 0x400>;
- reg-names = "control", "domain";
- domain-id = <19>;
- };
-
- clkfftc2: clkfftc2@2350078 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-2";
- reg = <0x02350078 0xb00>, <0x02350050 0x400>;
- reg-names = "control", "domain";
- domain-id = <20>;
- };
-
- clkfftc3: clkfftc3@235007c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-3";
- reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
- reg-names = "control", "domain";
- domain-id = <20>;
- };
-
- clkfftc4: clkfftc4@2350080 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-4";
- reg = <0x02350080 0xb00>, <0x02350050 0x400>;
- reg-names = "control", "domain";
- domain-id = <20>;
- };
-
- clkfftc5: clkfftc5@2350084 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-5";
- reg = <0x02350084 0xb00>, <0x02350050 0x400>;
- reg-names = "control", "domain";
- domain-id = <20>;
- };
-
- clkaif: clkaif@2350088 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "aif";
- reg = <0x02350088 0xb00>, <0x02350054 0x400>;
- reg-names = "control", "domain";
- domain-id = <21>;
- };
-
- clktcp3d0: clktcp3d0@235008c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tcp3d-0";
- reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
- reg-names = "control", "domain";
- domain-id = <22>;
- };
-
- clktcp3d1: clktcp3d1@2350090 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tcp3d-1";
- reg = <0x02350090 0xb00>, <0x02350058 0x400>;
- reg-names = "control", "domain";
- domain-id = <22>;
- };
-
- clktcp3d2: clktcp3d2@2350094 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tcp3d-2";
- reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
- reg-names = "control", "domain";
- domain-id = <23>;
- };
-
- clktcp3d3: clktcp3d3@2350098 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tcp3d-3";
- reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
- reg-names = "control", "domain";
- domain-id = <23>;
- };
-
- clkvcp0: clkvcp0@235009c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-0";
- reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
- reg-names = "control", "domain";
- domain-id = <24>;
- };
-
- clkvcp1: clkvcp1@23500a0 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-1";
- reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
- reg-names = "control", "domain";
- domain-id = <24>;
- };
-
- clkvcp2: clkvcp2@23500a4 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-2";
- reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
- reg-names = "control", "domain";
- domain-id = <24>;
- };
-
- clkvcp3: clkvcp3@23500a8 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-3";
- reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
- reg-names = "control", "domain";
- domain-id = <24>;
- };
-
- clkvcp4: clkvcp4@23500ac {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-4";
- reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
- reg-names = "control", "domain";
- domain-id = <25>;
- };
-
- clkvcp5: clkvcp5@23500b0 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-5";
- reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
- reg-names = "control", "domain";
- domain-id = <25>;
- };
-
- clkvcp6: clkvcp6@23500b4 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-6";
- reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
- reg-names = "control", "domain";
- domain-id = <25>;
- };
-
- clkvcp7: clkvcp7@23500b8 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-7";
- reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
- reg-names = "control", "domain";
- domain-id = <25>;
- };
-
- clkbcp: clkbcp@23500bc {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "bcp";
- reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
- reg-names = "control", "domain";
- domain-id = <26>;
- };
-
- clkdxb: clkdxb@23500c0 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "dxb";
- reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
- reg-names = "control", "domain";
- domain-id = <27>;
- };
-
- clkhyperlink1: clkhyperlink1@23500c4 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk12>;
- clock-output-names = "hyperlink-1";
- reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
- reg-names = "control", "domain";
- domain-id = <28>;
- };
-
- clkxge: clkxge@23500c8 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "xge";
- reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
- reg-names = "control", "domain";
- domain-id = <29>;
- };
-};
diff --git a/arch/arm/dts/keystone-k2hk-evm-u-boot.dtsi b/arch/arm/dts/keystone-k2hk-evm-u-boot.dtsi
index 3e38f22..3b3d327 100644
--- a/arch/arm/dts/keystone-k2hk-evm-u-boot.dtsi
+++ b/arch/arm/dts/keystone-k2hk-evm-u-boot.dtsi
@@ -4,9 +4,19 @@
*/
/{
- soc {
- bootph-all;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
};
+
+ chosen {
+ stdout-path = &uart0;
+ };
+};
+
+&soc0 {
+ bootph-all;
};
&i2c1 {
@@ -18,11 +28,9 @@
psc-domain = <2>;
};
-&usb {
- dwc3@2690000 {
- phys = <&usb_phy>;
- dr_mode = "host";
- snps,u2ss_inp3_quirk;
- status = "okay";
- };
+&usb0 {
+ phys = <&usb_phy>;
+ dr_mode = "host";
+ snps,u2ss_inp3_quirk;
+ status = "okay";
};
diff --git a/arch/arm/dts/keystone-k2hk-evm.dts b/arch/arm/dts/keystone-k2hk-evm.dts
deleted file mode 100644
index 6222876..0000000
--- a/arch/arm/dts/keystone-k2hk-evm.dts
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Kepler/Hawking EVM device tree
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "keystone-k2hk.dtsi"
-
-/ {
- compatible = "ti,k2hk-evm","ti,keystone";
- model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
-
- soc {
- clocks {
- refclksys: refclksys {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <122880000>;
- clock-output-names = "refclk-sys";
- };
-
- refclkpass: refclkpass {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <122880000>;
- clock-output-names = "refclk-pass";
- };
-
- refclkarm: refclkarm {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "refclk-arm";
- };
-
- refclkddr3a: refclkddr3a {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
- clock-output-names = "refclk-ddr3a";
- };
-
- refclkddr3b: refclkddr3b {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
- clock-output-names = "refclk-ddr3b";
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
- led-debug-1-1 {
- label = "keystone:green:debug1";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
- };
-
- led-debug-1-2 {
- label = "keystone:red:debug1";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
- };
-
- led-debug-2 {
- label = "keystone:blue:debug2";
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
- };
-
- led-debug-3 {
- label = "keystone:blue:debug3";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
- };
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
-};
-
-&aemif {
- cs0 {
- #address-cells = <2>;
- #size-cells = <1>;
- clock-ranges;
- ranges;
-
- ti,cs-chipselect = <0>;
- /* all timings in nanoseconds */
- ti,cs-min-turnaround-ns = <12>;
- ti,cs-read-hold-ns = <6>;
- ti,cs-read-strobe-ns = <23>;
- ti,cs-read-setup-ns = <9>;
- ti,cs-write-hold-ns = <8>;
- ti,cs-write-strobe-ns = <23>;
- ti,cs-write-setup-ns = <8>;
-
- nand@0,0 {
- compatible = "ti,keystone-nand","ti,davinci-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0 0 0x4000000
- 1 0 0x0000100>;
-
- ti,davinci-chipselect = <0>;
- ti,davinci-mask-ale = <0x2000>;
- ti,davinci-mask-cle = <0x4000>;
- ti,davinci-mask-chipsel = <0>;
- nand-ecc-mode = "hw";
- ti,davinci-ecc-bits = <4>;
- nand-on-flash-bbt;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "params";
- reg = <0x100000 0x80000>;
- read-only;
- };
-
- partition@180000 {
- label = "ubifs";
- reg = <0x180000 0x1fe80000>;
- };
- };
- };
-};
-
-&i2c0 {
- dtt@50 {
- compatible = "at,24c1024";
- reg = <0x50>;
- };
-};
-
-&spi0 {
- status = "okay";
- nor_flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "Micron,n25q128a11", "jedec,spi-nor";
- spi-max-frequency = <54000000>;
- m25p,fast-read;
- reg = <0>;
-
- partition@0 {
- label = "u-boot-spl";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@1 {
- label = "misc";
- reg = <0x80000 0xf80000>;
- };
- };
-};
-
-&mdio {
- status = "okay";
- ethphy0: ethernet-phy@0 {
- compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@1 {
- compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
diff --git a/arch/arm/dts/keystone-k2hk-netcp.dtsi b/arch/arm/dts/keystone-k2hk-netcp.dtsi
deleted file mode 100644
index 3f8c4c2..0000000
--- a/arch/arm/dts/keystone-k2hk-netcp.dtsi
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Keystone 2 Hawking Netcp driver
- *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-qmss: qmss@2a40000 {
- compatible = "ti,keystone-navigator-qmss";
- dma-coherent;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&chipclk13>;
- ranges;
- queue-range = <0 0x4000>;
- linkram0 = <0x100000 0x8000>;
- linkram1 = <0x0 0x10000>;
-
- qmgrs {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- qmgr0 {
- managed-queues = <0 0x2000>;
- reg = <0x2a40000 0x20000>,
- <0x2a06000 0x400>,
- <0x2a02000 0x1000>,
- <0x2a03000 0x1000>,
- <0x23a80000 0x20000>,
- <0x2a80000 0x20000>;
- reg-names = "peek", "status", "config",
- "region", "push", "pop";
- };
-
- qmgr1 {
- managed-queues = <0x2000 0x2000>;
- reg = <0x2a60000 0x20000>,
- <0x2a06400 0x400>,
- <0x2a04000 0x1000>,
- <0x2a05000 0x1000>,
- <0x23aa0000 0x20000>,
- <0x2aa0000 0x20000>;
- reg-names = "peek", "status", "config",
- "region", "push", "pop";
- };
- };
-
- queue-pools {
- qpend {
- qpend-0 {
- qrange = <658 8>;
- interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
- 0 43 0xf04 0 44 0xf04 0 45 0xf04
- 0 46 0xf04 0 47 0xf04>;
- };
- qpend-1 {
- qrange = <8704 16>;
- interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
- 0 51 0xf04 0 52 0xf04 0 53 0xf04
- 0 54 0xf04 0 55 0xf04 0 56 0xf04
- 0 57 0xf04 0 58 0xf04 0 59 0xf04
- 0 60 0xf04 0 61 0xf04 0 62 0xf04
- 0 63 0xf04>;
- qalloc-by-id;
- };
- qpend-2 {
- qrange = <8720 16>;
- interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
- 0 59 0xf04 0 68 0xf04 0 69 0xf04
- 0 70 0xf04 0 71 0xf04 0 72 0xf04
- 0 73 0xf04 0 74 0xf04 0 75 0xf04
- 0 76 0xf04 0 77 0xf04 0 78 0xf04
- 0 79 0xf04>;
- };
- };
- general-purpose {
- gp-0 {
- qrange = <4000 64>;
- };
- netcp-tx {
- qrange = <640 9>;
- qalloc-by-id;
- };
- netcpx-tx {
- qrange = <8752 8>;
- qalloc-by-id;
- };
- };
- };
-
- descriptor-regions {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- region-12 {
- id = <12>;
- region-spec = <8192 128>; /* num_desc desc_size */
- link-index = <0x4000>;
- };
- };
-}; /* qmss */
-
-knav_dmas: knav_dmas@0 {
- compatible = "ti,keystone-navigator-dma";
- clocks = <&papllclk>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- ti,navigator-cloud-address = <0x23a80000 0x23a90000
- 0x23aa0000 0x23ab0000>;
-
- dma_gbe: dma_gbe@0 {
- reg = <0x2004000 0x100>,
- <0x2004400 0x120>,
- <0x2004800 0x300>,
- <0x2004c00 0x120>,
- <0x2005000 0x400>;
- reg-names = "global", "txchan", "rxchan",
- "txsched", "rxflow";
- };
-};
-
-netcp: netcp@2000000 {
- reg = <0x2620110 0x8>;
- reg-names = "efuse";
- compatible = "ti,netcp-1.0";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* NetCP address range */
- ranges = <0 0x2000000 0x100000>;
-
- clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
- dma-coherent;
-
- ti,navigator-dmas = <&dma_gbe 22>,
- <&dma_gbe 23>,
- <&dma_gbe 8>;
- ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
-
- netcp-devices {
- ranges;
- #address-cells = <1>;
- #size-cells = <1>;
- gbe@90000 { /* ETHSS */
- #address-cells = <1>;
- #size-cells = <1>;
- label = "netcp-gbe";
- compatible = "ti,netcp-gbe";
- reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>;
- /* enable-ale; */
- tx-queue = <648>;
- tx-channel = "nettx";
-
- interfaces {
- gbe0: interface-0 {
- slave-port = <0>;
- link-interface = <1>;
- phy-handle = <ðphy0>;
- };
- gbe1: interface-1 {
- slave-port = <1>;
- link-interface = <1>;
- phy-handle = <ðphy1>;
- };
- };
-
- secondary-slave-ports {
- port-2 {
- slave-port = <2>;
- link-interface = <2>;
- };
- port-3 {
- slave-port = <3>;
- link-interface = <2>;
- };
- };
- };
- };
-
- netcp-interfaces {
- interface-0 {
- rx-channel = "netrx0";
- rx-pool = <1024 12>;
- tx-pool = <1024 12>;
- rx-queue-depth = <128 128 0 0>;
- rx-buffer-size = <1518 4096 0 0>;
- rx-queue = <8704>;
- tx-completion-queue = <8706>;
- efuse-mac = <1>;
- netcp-gbe = <&gbe0>;
-
- };
- interface-1 {
- rx-channel = "netrx1";
- rx-pool = <1024 12>;
- tx-pool = <1024 12>;
- rx-queue-depth = <128 128 0 0>;
- rx-buffer-size = <1518 4096 0 0>;
- rx-queue = <8705>;
- tx-completion-queue = <8707>;
- efuse-mac = <0>;
- local-mac-address = [02 18 31 7e 3e 6f];
- netcp-gbe = <&gbe1>;
- };
- };
-};
diff --git a/arch/arm/dts/keystone-k2hk.dtsi b/arch/arm/dts/keystone-k2hk.dtsi
deleted file mode 100644
index e5ab1fb..0000000
--- a/arch/arm/dts/keystone-k2hk.dtsi
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Kepler/Hawking soc specific device tree
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/ {
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&gic>;
-
- cpu@0 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <0>;
- };
-
- cpu@1 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <1>;
- };
-
- cpu@2 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <2>;
- };
-
- cpu@3 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <3>;
- };
- };
-
- soc {
- /include/ "keystone-k2hk-clocks.dtsi"
-
- dspgpio0: keystone_dsp_gpio@02620240 {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x240>;
- };
-
- dspgpio1: keystone_dsp_gpio@2620244 {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x244>;
- };
-
- dspgpio2: keystone_dsp_gpio@2620248 {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x248>;
- };
-
- dspgpio3: keystone_dsp_gpio@262024c {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x24c>;
- };
-
- dspgpio4: keystone_dsp_gpio@2620250 {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x250>;
- };
-
- dspgpio5: keystone_dsp_gpio@2620254 {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x254>;
- };
-
- dspgpio6: keystone_dsp_gpio@2620258 {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x258>;
- };
-
- dspgpio7: keystone_dsp_gpio@262025c {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x25c>;
- };
-
- mdio: mdio@02090300 {
- compatible = "ti,keystone_mdio", "ti,davinci_mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x02090300 0x100>;
- status = "disabled";
- clocks = <&clkcpgmac>;
- clock-names = "fck";
- bus_freq = <2500000>;
- };
- /include/ "keystone-k2hk-netcp.dtsi"
- };
-};
diff --git a/arch/arm/dts/keystone-k2l-clocks.dtsi b/arch/arm/dts/keystone-k2l-clocks.dtsi
deleted file mode 100644
index fcfc2fb..0000000
--- a/arch/arm/dts/keystone-k2l-clocks.dtsi
+++ /dev/null
@@ -1,263 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 lamarr SoC clock nodes
- *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-clocks {
- armpllclk: armpllclk@2620370 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclksys>;
- clock-output-names = "arm-pll-clk";
- reg = <0x02620370 4>;
- reg-names = "control";
- };
-
- mainpllclk: mainpllclk@2310110 {
- #clock-cells = <0>;
- compatible = "ti,keystone,main-pll-clock";
- clocks = <&refclksys>;
- reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
- reg-names = "control", "multiplier", "post-divider";
- };
-
- papllclk: papllclk@2620358 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclksys>;
- clock-output-names = "papllclk";
- reg = <0x02620358 4>;
- reg-names = "control";
- };
-
- ddr3apllclk: ddr3apllclk@2620360 {
- #clock-cells = <0>;
- compatible = "ti,keystone,pll-clock";
- clocks = <&refclksys>;
- clock-output-names = "ddr-3a-pll-clk";
- reg = <0x02620360 4>;
- reg-names = "control";
- };
-
- clkdfeiqnsys: clkdfeiqnsys@2350004 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk12>;
- clock-output-names = "dfe";
- reg-names = "control", "domain";
- reg = <0x02350004 0xb00>, <0x02350000 0x400>;
- domain-id = <0>;
- };
-
- clkpcie1: clkpcie1@235002c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk12>;
- clock-output-names = "pcie";
- reg = <0x0235002c 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <4>;
- };
-
- clkgem1: clkgem1@2350040 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem1";
- reg = <0x02350040 0xb00>, <0x02350024 0x400>;
- reg-names = "control", "domain";
- domain-id = <9>;
- };
-
- clkgem2: clkgem2@2350044 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem2";
- reg = <0x02350044 0xb00>, <0x02350028 0x400>;
- reg-names = "control", "domain";
- domain-id = <10>;
- };
-
- clkgem3: clkgem3@2350048 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk1>;
- clock-output-names = "gem3";
- reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
- reg-names = "control", "domain";
- domain-id = <11>;
- };
-
- clktac: clktac@2350064 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tac";
- reg = <0x02350064 0xb00>, <0x02350044 0x400>;
- reg-names = "control", "domain";
- domain-id = <17>;
- };
-
- clkrac: clkrac@2350068 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "rac";
- reg = <0x02350068 0xb00>, <0x02350044 0x400>;
- reg-names = "control", "domain";
- domain-id = <17>;
- };
-
- clkdfepd0: clkdfepd0@235006c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "dfe-pd0";
- reg = <0x0235006c 0xb00>, <0x02350044 0x400>;
- reg-names = "control", "domain";
- domain-id = <18>;
- };
-
- clkfftc0: clkfftc0@2350070 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-0";
- reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
- reg-names = "control", "domain";
- domain-id = <19>;
- };
-
- clkosr: clkosr@2350088 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "osr";
- reg = <0x02350088 0xb00>, <0x0235004c 0x400>;
- reg-names = "control", "domain";
- domain-id = <21>;
- };
-
- clktcp3d0: clktcp3d0@235008c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tcp3d-0";
- reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
- reg-names = "control", "domain";
- domain-id = <22>;
- };
-
- clktcp3d1: clktcp3d1@2350094 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "tcp3d-1";
- reg = <0x02350094 0xb00>, <0x02350058 0x400>;
- reg-names = "control", "domain";
- domain-id = <23>;
- };
-
- clkvcp0: clkvcp0@235009c {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-0";
- reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
- reg-names = "control", "domain";
- domain-id = <24>;
- };
-
- clkvcp1: clkvcp1@23500a0 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-1";
- reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
- reg-names = "control", "domain";
- domain-id = <24>;
- };
-
- clkvcp2: clkvcp2@23500a4 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-2";
- reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
- reg-names = "control", "domain";
- domain-id = <24>;
- };
-
- clkvcp3: clkvcp3@23500a8 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "vcp-3";
- reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
- reg-names = "control", "domain";
- domain-id = <24>;
- };
-
- clkbcp: clkbcp@23500bc {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "bcp";
- reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
- reg-names = "control", "domain";
- domain-id = <26>;
- };
-
- clkdfepd1: clkdfepd1@23500c0 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "dfe-pd1";
- reg = <0x023500c0 0xb00>, <0x02350044 0x400>;
- reg-names = "control", "domain";
- domain-id = <27>;
- };
-
- clkfftc1: clkfftc1@23500c4 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "fftc-1";
- reg = <0x023500c4 0xb00>, <0x023504c0 0x400>;
- reg-names = "control", "domain";
- domain-id = <28>;
- };
-
- clkiqnail: clkiqnail@23500c8 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk13>;
- clock-output-names = "iqn-ail";
- reg = <0x023500c8 0xb00>, <0x0235004c 0x400>;
- reg-names = "control", "domain";
- domain-id = <29>;
- };
-
- clkuart2: clkuart2@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "uart2";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-
- clkuart3: clkuart3@2350000 {
- #clock-cells = <0>;
- compatible = "ti,keystone,psc-clock";
- clocks = <&clkmodrst0>;
- clock-output-names = "uart3";
- reg = <0x02350000 0xb00>, <0x02350000 0x400>;
- reg-names = "control", "domain";
- domain-id = <0>;
- };
-};
diff --git a/arch/arm/dts/keystone-k2l-evm-u-boot.dtsi b/arch/arm/dts/keystone-k2l-evm-u-boot.dtsi
index f1aed14..d9dee80 100644
--- a/arch/arm/dts/keystone-k2l-evm-u-boot.dtsi
+++ b/arch/arm/dts/keystone-k2l-evm-u-boot.dtsi
@@ -3,16 +3,30 @@
* Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
*/
+/{
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+};
+
+&soc0 {
+ bootph-all;
+};
+
&usb_phy {
#phy-cells = <0>;
psc-domain = <2>;
};
-&usb {
- dwc3@2690000 {
- phys = <&usb_phy>;
- dr_mode = "host";
- snps,u2ss_inp3_quirk;
- status = "okay";
- };
+&usb0 {
+ phys = <&usb_phy>;
+ dr_mode = "host";
+ snps,u2ss_inp3_quirk;
+ status = "okay";
};
diff --git a/arch/arm/dts/keystone-k2l-evm.dts b/arch/arm/dts/keystone-k2l-evm.dts
deleted file mode 100644
index 9d2b454..0000000
--- a/arch/arm/dts/keystone-k2l-evm.dts
+++ /dev/null
@@ -1,129 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Lamarr EVM device tree
- *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "keystone-k2l.dtsi"
-
-/ {
- compatible = "ti,k2l-evm","ti,keystone";
- model = "Texas Instruments Keystone 2 Lamarr EVM";
-
- soc {
- clocks {
- refclksys: refclksys {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <122880000>;
- clock-output-names = "refclk-sys";
- };
- };
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb {
- status = "okay";
-};
-
-&i2c0 {
- dtt@50 {
- compatible = "at,24c1024";
- reg = <0x50>;
- };
-};
-
-&aemif {
- cs0 {
- #address-cells = <2>;
- #size-cells = <1>;
- clock-ranges;
- ranges;
-
- ti,cs-chipselect = <0>;
- /* all timings in nanoseconds */
- ti,cs-min-turnaround-ns = <12>;
- ti,cs-read-hold-ns = <6>;
- ti,cs-read-strobe-ns = <23>;
- ti,cs-read-setup-ns = <9>;
- ti,cs-write-hold-ns = <8>;
- ti,cs-write-strobe-ns = <23>;
- ti,cs-write-setup-ns = <8>;
-
- nand@0,0 {
- compatible = "ti,keystone-nand","ti,davinci-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0 0 0x4000000
- 1 0 0x0000100>;
-
- ti,davinci-chipselect = <0>;
- ti,davinci-mask-ale = <0x2000>;
- ti,davinci-mask-cle = <0x4000>;
- ti,davinci-mask-chipsel = <0>;
- nand-ecc-mode = "hw";
- ti,davinci-ecc-bits = <4>;
- nand-on-flash-bbt;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "params";
- reg = <0x100000 0x80000>;
- read-only;
- };
-
- partition@180000 {
- label = "ubifs";
- reg = <0x180000 0x7FE80000>;
- };
- };
- };
-};
-
-&spi0 {
- status ="okay";
- nor_flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "Micron,n25q128a11", "jedec,spi-nor";
- spi-max-frequency = <54000000>;
- m25p,fast-read;
- reg = <0>;
-
- partition@0 {
- label = "u-boot-spl";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@1 {
- label = "misc";
- reg = <0x80000 0xf80000>;
- };
- };
-};
-
-&mdio {
- status = "okay";
- ethphy0: ethernet-phy@0 {
- compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@1 {
- compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
diff --git a/arch/arm/dts/keystone-k2l-netcp.dtsi b/arch/arm/dts/keystone-k2l-netcp.dtsi
deleted file mode 100644
index 2caa058..0000000
--- a/arch/arm/dts/keystone-k2l-netcp.dtsi
+++ /dev/null
@@ -1,187 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Keystone 2 Lamarr Netcp driver
- *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-qmss: qmss@2a40000 {
- compatible = "ti,keystone-navigator-qmss";
- dma-coherent;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&chipclk13>;
- ranges;
- queue-range = <0 0x2000>;
- linkram0 = <0x100000 0x4000>;
- linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */
-
- qmgrs {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- qmgr0 {
- managed-queues = <0 0x2000>;
- reg = <0x2a40000 0x20000>,
- <0x2a06000 0x400>,
- <0x2a02000 0x1000>,
- <0x2a03000 0x1000>,
- <0x23a80000 0x20000>,
- <0x2a80000 0x20000>;
- reg-names = "peek", "status", "config",
- "region", "push", "pop";
- };
- };
- queue-pools {
- qpend {
- qpend-0 {
- qrange = <658 8>;
- interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
- 0 43 0xf04 0 44 0xf04 0 45 0xf04
- 0 46 0xf04 0 47 0xf04>;
- };
- qpend-1 {
- qrange = <528 16>;
- interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
- 0 51 0xf04 0 52 0xf04 0 53 0xf04
- 0 54 0xf04 0 55 0xf04 0 56 0xf04
- 0 57 0xf04 0 58 0xf04 0 59 0xf04
- 0 60 0xf04 0 61 0xf04 0 62 0xf04
- 0 63 0xf04>;
- qalloc-by-id;
- };
- qpend-2 {
- qrange = <544 16>;
- interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
- 0 59 0xf04 0 68 0xf04 0 69 0xf04
- 0 70 0xf04 0 71 0xf04 0 72 0xf04
- 0 73 0xf04 0 74 0xf04 0 75 0xf04
- 0 76 0xf04 0 77 0xf04 0 78 0xf04
- 0 79 0xf04>;
- };
- };
- general-purpose {
- gp-0 {
- qrange = <4000 64>;
- };
- netcp-tx {
- qrange = <896 128>;
- qalloc-by-id;
- };
- };
- };
-
- descriptor-regions {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- region-12 {
- id = <12>;
- region-spec = <8192 128>; /* num_desc desc_size */
- link-index = <0x4000>;
- };
- };
-}; /* qmss */
-
-knav_dmas: knav_dmas@0 {
- compatible = "ti,keystone-navigator-dma";
- clocks = <&papllclk>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- ti,navigator-cloud-address = <0x23a80000 0x23a90000>;
-
- dma_gbe: dma_gbe@0 {
- reg = <0x26186000 0x100>,
- <0x26187000 0x2a0>,
- <0x26188000 0xb60>,
- <0x26186100 0x80>,
- <0x26189000 0x1000>;
- reg-names = "global", "txchan", "rxchan",
- "txsched", "rxflow";
- };
-};
-
-netcp: netcp@26000000 {
- reg = <0x2620110 0x8>;
- reg-names = "efuse";
- compatible = "ti,netcp-1.0";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* NetCP address range */
- ranges = <0 0x26000000 0x1000000>;
-
- clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
- dma-coherent;
-
- ti,navigator-dmas = <&dma_gbe 0>,
- <&dma_gbe 8>,
- <&dma_gbe 0>;
- ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
-
- netcp-devices {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- gbe@200000 { /* ETHSS */
- label = "netcp-gbe";
- compatible = "ti,netcp-gbe-5";
- reg = <0x200000 0x900>, <0x220000 0x20000>;
- /* enable-ale; */
- tx-queue = <896>;
- tx-channel = "nettx";
-
- interfaces {
- gbe0: interface-0 {
- slave-port = <0>;
- link-interface = <1>;
- phy-handle = <ðphy0>;
- };
- gbe1: interface-1 {
- slave-port = <1>;
- link-interface = <1>;
- phy-handle = <ðphy1>;
- };
- };
-
- secondary-slave-ports {
- port-2 {
- slave-port = <2>;
- link-interface = <2>;
- };
- port-3 {
- slave-port = <3>;
- link-interface = <2>;
- };
- };
- };
- };
-
- netcp-interfaces {
- interface-0 {
- rx-channel = "netrx0";
- rx-pool = <1024 12>;
- tx-pool = <1024 12>;
- rx-queue-depth = <128 128 0 0>;
- rx-buffer-size = <1518 4096 0 0>;
- rx-queue = <528>;
- tx-completion-queue = <530>;
- efuse-mac = <1>;
- netcp-gbe = <&gbe0>;
-
- };
- interface-1 {
- rx-channel = "netrx1";
- rx-pool = <1024 12>;
- tx-pool = <1024 12>;
- rx-queue-depth = <128 128 0 0>;
- rx-buffer-size = <1518 4096 0 0>;
- rx-queue = <529>;
- tx-completion-queue = <531>;
- efuse-mac = <0>;
- local-mac-address = [02 18 31 7e 3e 7f];
- netcp-gbe = <&gbe1>;
- };
- };
-};
diff --git a/arch/arm/dts/keystone-k2l.dtsi b/arch/arm/dts/keystone-k2l.dtsi
deleted file mode 100644
index c8893e2..0000000
--- a/arch/arm/dts/keystone-k2l.dtsi
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Keystone 2 Lamarr SoC specific device tree
- *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-/ {
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- interrupt-parent = <&gic>;
-
- cpu@0 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <0>;
- };
-
- cpu@1 {
- compatible = "arm,cortex-a15";
- device_type = "cpu";
- reg = <1>;
- };
- };
-
- soc {
- /include/ "keystone-k2l-clocks.dtsi"
-
- uart2: serial@2348400 {
- compatible = "ns16550a";
- current-speed = <115200>;
- reg-shift = <2>;
- reg-io-width = <4>;
- reg = <0x02348400 0x100>;
- clocks = <&clkuart2>;
- interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
- };
-
- uart3: serial@2348800 {
- compatible = "ns16550a";
- current-speed = <115200>;
- reg-shift = <2>;
- reg-io-width = <4>;
- reg = <0x02348800 0x100>;
- clocks = <&clkuart3>;
- interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
- };
-
- dspgpio0: keystone_dsp_gpio@02620240 {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x240>;
- };
-
- dspgpio1: keystone_dsp_gpio@2620244 {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x244>;
- };
-
- dspgpio2: keystone_dsp_gpio@2620248 {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x248>;
- };
-
- dspgpio3: keystone_dsp_gpio@262024c {
- compatible = "ti,keystone-dsp-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio,syscon-dev = <&devctrl 0x24c>;
- };
-
- mdio: mdio@26200f00 {
- compatible = "ti,keystone_mdio", "ti,davinci_mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x26200f00 0x100>;
- status = "disabled";
- clocks = <&clkcpgmac>;
- clock-names = "fck";
- bus_freq = <2500000>;
- };
- /include/ "keystone-k2l-netcp.dtsi"
- };
-};
-
-&spi0 {
- ti,davinci-spi-num-cs = <5>;
-};
-
-&spi1 {
- ti,davinci-spi-num-cs = <3>;
-};
-
-&spi2 {
- ti,davinci-spi-num-cs = <5>;
- /* Pin muxed. Enabled and configured by Bootloader */
- status = "disabled";
-};
diff --git a/arch/arm/dts/keystone.dtsi b/arch/arm/dts/keystone.dtsi
deleted file mode 100644
index 1538cce..0000000
--- a/arch/arm/dts/keystone.dtsi
+++ /dev/null
@@ -1,330 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "skeleton.dtsi"
-
-/ {
- model = "Texas Instruments Keystone 2 SoC";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&gic>;
-
- aliases {
- serial0 = &uart0;
- spi0 = &spi0;
- spi1 = &spi1;
- spi2 = &spi2;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- };
-
- chosen {
- stdout-path = &uart0;
- };
-
- memory {
- reg = <0x80000000 0x40000000>;
- };
-
- gic: interrupt-controller {
- compatible = "arm,cortex-a15-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x02561000 0x1000>,
- <0x02562000 0x2000>,
- <0x02564000 0x1000>,
- <0x02566000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts =
- <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu {
- compatible = "arm,cortex-a15-pmu";
- interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "ti,keystone","simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- pllctrl: pll-controller@02310000 {
- compatible = "ti,keystone-pllctrl", "syscon";
- reg = <0x02310000 0x200>;
- };
-
- devctrl: device-state-control@02620000 {
- compatible = "ti,keystone-devctrl", "syscon";
- reg = <0x02620000 0x1000>;
- };
-
- rstctrl: reset-controller {
- compatible = "ti,keystone-reset";
- ti,syscon-pll = <&pllctrl 0xe4>;
- ti,syscon-dev = <&devctrl 0x328>;
- ti,wdt-list = <0>;
- };
-
- /include/ "keystone-clocks.dtsi"
-
- uart0: serial@2530c00 {
- compatible = "ns16550a";
- current-speed = <115200>;
- reg-shift = <2>;
- reg-io-width = <4>;
- reg = <0x02530c00 0x100>;
- clocks = <&clkuart0>;
- interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
- };
-
- uart1: serial@2531000 {
- compatible = "ns16550a";
- current-speed = <115200>;
- reg-shift = <2>;
- reg-io-width = <4>;
- reg = <0x02531000 0x100>;
- clocks = <&clkuart1>;
- interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
- };
-
- i2c0: i2c@2530000 {
- compatible = "ti,davinci-i2c";
- reg = <0x02530000 0x400>;
- clock-frequency = <100000>;
- clocks = <&clki2c>;
- interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c1: i2c@2530400 {
- compatible = "ti,davinci-i2c";
- reg = <0x02530400 0x400>;
- clock-frequency = <100000>;
- clocks = <&clki2c>;
- interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c2: i2c@2530800 {
- compatible = "ti,davinci-i2c";
- reg = <0x02530800 0x400>;
- clock-frequency = <100000>;
- clocks = <&clki2c>;
- interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi0: spi@21000400 {
- compatible = "ti,dm6441-spi";
- reg = <0x21000400 0x200>;
- num-cs = <4>;
- ti,davinci-spi-intr-line = <0>;
- interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkspi>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@21000600 {
- compatible = "ti,dm6441-spi";
- reg = <0x21000600 0x200>;
- num-cs = <4>;
- ti,davinci-spi-intr-line = <0>;
- interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkspi>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi2: spi@21000800 {
- compatible = "ti,dm6441-spi";
- reg = <0x21000800 0x200>;
- num-cs = <4>;
- ti,davinci-spi-intr-line = <0>;
- interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkspi>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- usb_phy: usb_phy@2620738 {
- compatible = "ti,keystone-usbphy";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x2620738 24>;
- status = "disabled";
- };
-
- usb: usb@2680000 {
- compatible = "ti,keystone-dwc3";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x2680000 0x10000>;
- clocks = <&clkusb>;
- clock-names = "usb";
- interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
- ranges;
- dma-coherent;
- dma-ranges;
- status = "disabled";
-
- usb@2690000 {
- compatible = "synopsys,dwc3";
- reg = <0x2690000 0x70000>;
- interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
- usb-phy = <&usb_phy>, <&usb_phy>;
- };
- };
-
- wdt: wdt@22f0080 {
- compatible = "ti,keystone-wdt","ti,davinci-wdt";
- reg = <0x022f0080 0x80>;
- clocks = <&clkwdtimer0>;
- };
-
- clock_event: timer@22f0000 {
- compatible = "ti,keystone-timer";
- reg = <0x022f0000 0x80>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clktimer15>;
- };
-
- gpio0: gpio@260bf00 {
- compatible = "ti,keystone-gpio";
- reg = <0x0260bf00 0x100>;
- gpio-controller;
- #gpio-cells = <2>;
- /* HW Interrupts mapped to GPIO pins */
- interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkgpio>;
- clock-names = "gpio";
- ti,ngpio = <32>;
- ti,davinci-gpio-unbanked = <32>;
- };
-
- aemif: aemif@21000A00 {
- compatible = "ti,keystone-aemif", "ti,davinci-aemif";
- #address-cells = <2>;
- #size-cells = <1>;
- clocks = <&clkaemif>;
- clock-names = "aemif";
- clock-ranges;
-
- reg = <0x21000A00 0x00000100>;
- ranges = <0 0 0x30000000 0x10000000
- 1 0 0x21000A00 0x00000100>;
- };
-
- kirq0: keystone_irq@26202a0 {
- compatible = "ti,keystone-irq";
- interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
- interrupt-controller;
- #interrupt-cells = <1>;
- ti,syscon-dev = <&devctrl 0x2a0>;
- };
-
- pcie0: pcie@21800000 {
- compatible = "ti,keystone-pcie", "snps,dw-pcie";
- clocks = <&clkpcie>;
- clock-names = "pcie";
- #address-cells = <3>;
- #size-cells = <2>;
- reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
- ranges = <0x81000000 0 0 0x23250000 0 0x4000
- 0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
-
- status = "disabled";
- device_type = "pci";
- num-lanes = <2>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
- <0 0 0 2 &pcie_intc0 1>, /* INT B */
- <0 0 0 3 &pcie_intc0 2>, /* INT C */
- <0 0 0 4 &pcie_intc0 3>; /* INT D */
-
- pcie_msi_intc0: msi-interrupt-controller {
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
- };
-
- pcie_intc0: legacy-interrupt-controller {
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
- };
- };
- };
-};
diff --git a/arch/arm/dts/mt7981.dtsi b/arch/arm/dts/mt7981.dtsi
index 7aaa777..a9991a1 100644
--- a/arch/arm/dts/mt7981.dtsi
+++ b/arch/arm/dts/mt7981.dtsi
@@ -98,14 +98,6 @@
bootph-all;
};
- infracfg_ao: infracfg_ao@10001000 {
- compatible = "mediatek,mt7981-infracfg_ao";
- reg = <0x10001000 0x80>;
- clock-parent = <&infracfg>;
- #clock-cells = <1>;
- bootph-all;
- };
-
infracfg: infracfg@10001000 {
compatible = "mediatek,mt7981-infracfg";
reg = <0x10001000 0x30>;
@@ -140,14 +132,13 @@
#clock-cells = <1>;
#pwm-cells = <2>;
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg CK_INFRA_PWM>,
- <&infracfg_ao CK_INFRA_PWM_BSEL>,
- <&infracfg_ao CK_INFRA_PWM1_CK>,
- <&infracfg_ao CK_INFRA_PWM2_CK>,
- /* FIXME */
- <&infracfg_ao CK_INFRA_PWM2_CK>;
- assigned-clocks = <&topckgen CK_TOP_PWM_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&infracfg CLK_INFRA_PWM_BSEL>,
+ <&infracfg CLK_INFRA_PWM1_CK>,
+ <&infracfg CLK_INFRA_PWM2_CK>,
+ <&infracfg CLK_INFRA_PWM3_CK>;
+ assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_CB_CKSQ_40M>;
clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
status = "disabled";
};
@@ -158,8 +149,8 @@
<0x10217080 0x80>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
clock-div = <1>;
- clocks = <&infracfg_ao CK_INFRA_I2CO_CK>,
- <&infracfg_ao CK_INFRA_AP_DMA_CK>;
+ clocks = <&infracfg CLK_INFRA_I2C0_CK>,
+ <&infracfg CLK_INFRA_AP_DMA_CK>;
clock-names = "main", "dma";
#address-cells = <1>;
#size-cells = <0>;
@@ -170,11 +161,11 @@
compatible = "mediatek,hsuart";
reg = <0x11002000 0x400>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg_ao CK_INFRA_UART0_CK>;
- assigned-clocks = <&topckgen CK_TOP_UART_SEL>,
- <&infracfg_ao CK_INFRA_UART0_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>,
- <&infracfg CK_INFRA_UART>;
+ clocks = <&infracfg CLK_INFRA_UART0_CK>;
+ assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&infracfg CLK_INFRA_UART0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_CB_CKSQ_40M>,
+ <&topckgen CLK_TOP_UART_SEL>;
mediatek,force-highspeed;
status = "disabled";
bootph-all;
@@ -184,11 +175,11 @@
compatible = "mediatek,hsuart";
reg = <0x11003000 0x400>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg_ao CK_INFRA_UART1_CK>;
- assigned-clocks = <&topckgen CK_TOP_UART_SEL>,
- <&infracfg_ao CK_INFRA_UART1_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>,
- <&infracfg CK_INFRA_UART>;
+ clocks = <&infracfg CLK_INFRA_UART1_CK>;
+ assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&infracfg CLK_INFRA_UART1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_CB_CKSQ_40M>,
+ <&topckgen CLK_TOP_UART_SEL>;
mediatek,force-highspeed;
status = "disabled";
};
@@ -197,11 +188,11 @@
compatible = "mediatek,hsuart";
reg = <0x11004000 0x400>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg_ao CK_INFRA_UART2_CK>;
- assigned-clocks = <&topckgen CK_TOP_UART_SEL>,
- <&infracfg_ao CK_INFRA_UART2_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>,
- <&infracfg CK_INFRA_UART>;
+ clocks = <&infracfg CLK_INFRA_UART2_CK>;
+ assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&infracfg CLK_INFRA_UART2_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_CB_CKSQ_40M>,
+ <&topckgen CLK_TOP_UART_SEL>;
mediatek,force-highspeed;
status = "disabled";
};
@@ -211,14 +202,14 @@
reg = <0x11005000 0x1000>,
<0x11006000 0x1000>;
reg-names = "nfi", "ecc";
- clocks = <&infracfg_ao CK_INFRA_SPINFI1_CK>,
- <&infracfg_ao CK_INFRA_NFI1_CK>,
- <&infracfg_ao CK_INFRA_NFI_HCK_CK>;
+ clocks = <&infracfg CLK_INFRA_SPINFI1_CK>,
+ <&infracfg CLK_INFRA_NFI1_CK>,
+ <&infracfg CLK_INFRA_NFI_HCK_CK>;
clock-names = "pad_clk", "nfi_clk", "nfi_hclk";
- assigned-clocks = <&topckgen CK_TOP_SPINFI_SEL>,
- <&topckgen CK_TOP_NFI1X_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_M_D8>,
- <&topckgen CK_TOP_CB_M_D8>;
+ assigned-clocks = <&topckgen CLK_TOP_SPINFI_SEL>,
+ <&topckgen CLK_TOP_NFI1X_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_CB_M_D8>,
+ <&topckgen CLK_TOP_CB_M_D8>;
status = "disabled";
};
@@ -244,14 +235,14 @@
};
sgmiisys0: syscon@10060000 {
- compatible = "mediatek,mt7986-sgmiisys", "syscon";
+ compatible = "mediatek,mt7981-sgmiisys_0", "syscon";
reg = <0x10060000 0x1000>;
pn_swap;
#clock-cells = <1>;
};
sgmiisys1: syscon@10070000 {
- compatible = "mediatek,mt7986-sgmiisys", "syscon";
+ compatible = "mediatek,mt7981-sgmiisys_1", "syscon";
reg = <0x10070000 0x1000>;
#clock-cells = <1>;
};
@@ -265,13 +256,13 @@
spi0: spi@1100a000 {
compatible = "mediatek,ipm-spi";
reg = <0x1100a000 0x100>;
- clocks = <&infracfg_ao CK_INFRA_SPI0_CK>,
- <&topckgen CK_TOP_SPI_SEL>;
- assigned-clocks = <&topckgen CK_TOP_SPI_SEL>,
- <&infracfg CK_INFRA_SPI0_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_M_D2>,
- <&topckgen CK_INFRA_ISPI0>;
- clock-names = "sel-clk", "spi-clk";
+ clocks = <&infracfg CLK_INFRA_SPI0_CK>,
+ <&topckgen CLK_TOP_SPI_SEL>;
+ assigned-clocks = <&topckgen CLK_TOP_SPI_SEL>,
+ <&infracfg CLK_INFRA_SPI0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_CB_M_D2>,
+ <&topckgen CLK_TOP_SPI_SEL>;
+ clock-names = "spi-clk", "sel-clk";
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -280,19 +271,26 @@
compatible = "mediatek,ipm-spi";
reg = <0x1100b000 0x100>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&infracfg CLK_INFRA_SPI1_CK>,
+ <&topckgen CLK_TOP_SPIM_MST_SEL>;
+ assigned-clocks = <&topckgen CLK_TOP_SPIM_MST_SEL>,
+ <&infracfg CLK_INFRA_SPI1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_CB_M_D2>,
+ <&topckgen CLK_TOP_SPIM_MST_SEL>;
+ clock-names = "spi-clk", "sel-clk";
status = "disabled";
};
spi2: spi@11009000 {
compatible = "mediatek,ipm-spi";
reg = <0x11009000 0x100>;
- clocks = <&infracfg_ao CK_INFRA_SPI0_CK>,
- <&topckgen CK_TOP_SPI_SEL>;
- assigned-clocks = <&topckgen CK_TOP_SPI_SEL>,
- <&infracfg CK_INFRA_SPI0_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_M_D2>,
- <&topckgen CK_INFRA_ISPI0>;
- clock-names = "sel-clk", "spi-clk";
+ clocks = <&infracfg CLK_INFRA_SPI2_CK>,
+ <&topckgen CLK_TOP_SPI_SEL>;
+ assigned-clocks = <&topckgen CLK_TOP_SPI_SEL>,
+ <&infracfg CLK_INFRA_SPI2_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_CB_M_D2>,
+ <&topckgen CLK_TOP_SPI_SEL>;
+ clock-names = "spi-clk", "sel-clk";
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -302,13 +300,13 @@
reg = <0x11230000 0x1000>,
<0x11C20000 0x1000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&topckgen CK_TOP_EMMC_400M>,
- <&topckgen CK_TOP_EMMC_208M>,
- <&infracfg_ao CK_INFRA_MSDC_CK>;
- assigned-clocks = <&topckgen CK_TOP_EMMC_400M_SEL>,
- <&topckgen CK_TOP_EMMC_208M_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_NET2_D2>,
- <&topckgen CK_TOP_CB_M_D2>;
+ clocks = <&topckgen CLK_TOP_EMMC_400M>,
+ <&topckgen CLK_TOP_EMMC_208M>,
+ <&infracfg CLK_INFRA_MSDC_CK>;
+ assigned-clocks = <&topckgen CLK_TOP_EMMC_400M_SEL>,
+ <&topckgen CLK_TOP_EMMC_208M_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_CB_NET2_D2>,
+ <&topckgen CLK_TOP_CB_M_D2>;
clock-names = "source", "hclk", "source_cg";
status = "disabled";
};
diff --git a/arch/arm/dts/mt7986.dtsi b/arch/arm/dts/mt7986.dtsi
index 30b5a89..f871f23 100644
--- a/arch/arm/dts/mt7986.dtsi
+++ b/arch/arm/dts/mt7986.dtsi
@@ -78,7 +78,7 @@
compatible = "mediatek,mt7986-timer";
reg = <0x10008000 0x1000>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg CK_INFRA_CK_F26M>;
+ clocks = <&topckgen CLK_TOP_F26M_SEL>;
clock-names = "gpt-clk";
bootph-all;
};
@@ -115,13 +115,6 @@
#clock-cells = <1>;
};
- infracfg_ao: infracfg_ao@10001000 {
- compatible = "mediatek,mt7986-infracfg_ao";
- reg = <0x10001000 0x68>;
- clock-parent = <&infracfg>;
- #clock-cells = <1>;
- };
-
infracfg: infracfg@10001040 {
compatible = "mediatek,mt7986-infracfg";
reg = <0x10001000 0x1000>;
@@ -154,18 +147,18 @@
#clock-cells = <1>;
#pwm-cells = <2>;
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg CK_INFRA_PWM>,
- <&infracfg_ao CK_INFRA_PWM_BSEL>,
- <&infracfg_ao CK_INFRA_PWM1_CK>,
- <&infracfg_ao CK_INFRA_PWM2_CK>;
- assigned-clocks = <&topckgen CK_TOP_PWM_SEL>,
- <&infracfg CK_INFRA_PWM_BSEL>,
- <&infracfg CK_INFRA_PWM1_SEL>,
- <&infracfg CK_INFRA_PWM2_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_M_D4>,
- <&infracfg CK_INFRA_PWM>,
- <&infracfg CK_INFRA_PWM>,
- <&infracfg CK_INFRA_PWM>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&infracfg CLK_INFRA_PWM_BSEL>,
+ <&infracfg CLK_INFRA_PWM1_CK>,
+ <&infracfg CLK_INFRA_PWM2_CK>;
+ assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&infracfg CLK_INFRA_PWM_BSEL>,
+ <&infracfg CLK_INFRA_PWM1_SEL>,
+ <&infracfg CLK_INFRA_PWM2_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MPLL_D4>,
+ <&topckgen CLK_TOP_PWM_SEL>,
+ <&topckgen CLK_TOP_PWM_SEL>,
+ <&topckgen CLK_TOP_PWM_SEL>;
clock-names = "top", "main", "pwm1", "pwm2";
status = "disabled";
bootph-all;
@@ -175,11 +168,11 @@
compatible = "mediatek,hsuart";
reg = <0x11002000 0x400>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg_ao CK_INFRA_UART0_CK>;
- assigned-clocks = <&topckgen CK_TOP_UART_SEL>,
- <&infracfg_ao CK_INFRA_UART0_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>,
- <&infracfg CK_INFRA_UART>;
+ clocks = <&infracfg CLK_INFRA_UART0_CK>;
+ assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&infracfg CLK_INFRA_UART0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+ <&topckgen CLK_TOP_UART_SEL>;
mediatek,force-highspeed;
status = "disabled";
bootph-all;
@@ -189,9 +182,9 @@
compatible = "mediatek,hsuart";
reg = <0x11003000 0x400>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg_ao CK_INFRA_UART1_CK>;
- assigned-clocks = <&infracfg CK_INFRA_UART1_SEL>;
- assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>;
+ clocks = <&infracfg CLK_INFRA_UART1_CK>;
+ assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
mediatek,force-highspeed;
status = "disabled";
};
@@ -200,9 +193,9 @@
compatible = "mediatek,hsuart";
reg = <0x11004000 0x400>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg_ao CK_INFRA_UART2_CK>;
- assigned-clocks = <&infracfg CK_INFRA_UART2_SEL>;
- assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>;
+ clocks = <&infracfg CLK_INFRA_UART2_CK>;
+ assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
mediatek,force-highspeed;
status = "disabled";
};
@@ -212,14 +205,14 @@
reg = <0x11005000 0x1000>,
<0x11006000 0x1000>;
reg-names = "nfi", "ecc";
- clocks = <&infracfg_ao CK_INFRA_SPINFI1_CK>,
- <&infracfg_ao CK_INFRA_NFI1_CK>,
- <&infracfg_ao CK_INFRA_NFI_HCK_CK>;
+ clocks = <&infracfg CLK_INFRA_SPINFI1_CK>,
+ <&infracfg CLK_INFRA_NFI1_CK>,
+ <&infracfg CLK_INFRA_NFI_HCK_CK>;
clock-names = "pad_clk", "nfi_clk", "nfi_hclk";
- assigned-clocks = <&topckgen CK_TOP_SPINFI_SEL>,
- <&topckgen CK_TOP_NFI1X_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_M_D8>,
- <&topckgen CK_TOP_CB_M_D8>;
+ assigned-clocks = <&topckgen CLK_TOP_SPINFI_SEL>,
+ <&topckgen CLK_TOP_NFI1X_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MPLL_D8>,
+ <&topckgen CLK_TOP_MPLL_D8>;
status = "disabled";
};
@@ -258,12 +251,12 @@
spi0: spi@1100a000 {
compatible = "mediatek,ipm-spi";
reg = <0x1100a000 0x100>;
- clocks = <&infracfg_ao CK_INFRA_SPI0_CK>,
- <&topckgen CK_TOP_SPI_SEL>;
- assigned-clocks = <&topckgen CK_TOP_SPI_SEL>,
- <&infracfg CK_INFRA_SPI0_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_M_D2>,
- <&topckgen CK_INFRA_ISPI0>;
+ clocks = <&infracfg CLK_INFRA_SPI0_CK>,
+ <&topckgen CLK_TOP_SPI_SEL>;
+ assigned-clocks = <&topckgen CLK_TOP_SPI_SEL>,
+ <&infracfg CLK_INFRA_SPI0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MPLL_D2>,
+ <&topckgen CLK_TOP_SPI_SEL>;
clock-names = "sel-clk", "spi-clk";
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -281,13 +274,13 @@
reg = <0x11230000 0x1000>,
<0x11C20000 0x1000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&topckgen CK_TOP_EMMC_416M>,
- <&topckgen CK_TOP_EMMC_250M>,
- <&infracfg_ao CK_INFRA_MSDC_CK>;
- assigned-clocks = <&topckgen CK_TOP_EMMC_416M_SEL>,
- <&topckgen CK_TOP_EMMC_250M_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_M_416M>,
- <&topckgen CK_TOP_NET1_D5_D2>;
+ clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+ <&topckgen CLK_TOP_EMMC_250M_SEL>,
+ <&infracfg CLK_INFRA_MSDC_CK>;
+ assigned-clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+ <&topckgen CLK_TOP_EMMC_250M_SEL>;
+ assigned-clock-parents = <&fixed_plls CLK_APMIXED_MPLL>,
+ <&topckgen CLK_TOP_NET1PLL_D5_D2>;
clock-names = "source", "hclk", "source_cg";
status = "disabled";
};
diff --git a/arch/arm/dts/mt7988.dtsi b/arch/arm/dts/mt7988.dtsi
index 5c0c5bc..e120e50 100644
--- a/arch/arm/dts/mt7988.dtsi
+++ b/arch/arm/dts/mt7988.dtsi
@@ -97,13 +97,6 @@
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
- infracfg_ao_cgs: infracfg_ao_cgs@10001000 {
- compatible = "mediatek,mt7988-infracfg_ao_cgs", "syscon";
- reg = <0 0x10001000 0 0x1000>;
- clock-parent = <&infracfg_ao>;
- #clock-cells = <1>;
- };
-
apmixedsys: apmixedsys@1001e000 {
compatible = "mediatek,mt7988-fixed-plls", "syscon";
reg = <0 0x1001e000 0 0x1000>;
@@ -251,7 +244,7 @@
#clock-cells = <1>;
};
- infracfg_ao: infracfg@10001000 {
+ infracfg: infracfg@10001000 {
compatible = "mediatek,mt7988-infracfg", "syscon";
reg = <0 0x10001000 0 0x1000>;
clock-parent = <&topckgen>;
@@ -262,11 +255,11 @@
compatible = "mediatek,hsuart";
reg = <0 0x11000000 0 0x100>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg_ao_cgs CK_INFRA_52M_UART0_CK>;
- assigned-clocks = <&topckgen CK_TOP_UART_SEL>,
- <&infracfg_ao CK_INFRA_MUX_UART0_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>,
- <&infracfg_ao CK_INFRA_UART_O0>;
+ clocks = <&infracfg CLK_INFRA_52M_UART0_CK>;
+ assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&infracfg CLK_INFRA_MUX_UART0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+ <&topckgen CLK_TOP_UART_SEL>;
status = "disabled";
};
@@ -274,11 +267,11 @@
compatible = "mediatek,hsuart";
reg = <0 0x11000100 0 0x100>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg_ao_cgs CK_INFRA_52M_UART1_CK>;
- assigned-clocks = <&topckgen CK_TOP_UART_SEL>,
- <&infracfg_ao CK_INFRA_MUX_UART1_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>,
- <&infracfg_ao CK_INFRA_UART_O1>;
+ clocks = <&infracfg CLK_INFRA_52M_UART1_CK>;
+ assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&infracfg CLK_INFRA_MUX_UART1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+ <&topckgen CLK_TOP_UART_SEL>;
status = "disabled";
};
@@ -286,11 +279,11 @@
compatible = "mediatek,hsuart";
reg = <0 0x11000200 0 0x100>;
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg_ao_cgs CK_INFRA_52M_UART2_CK>;
- assigned-clocks = <&topckgen CK_TOP_UART_SEL>,
- <&infracfg_ao CK_INFRA_MUX_UART2_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>,
- <&infracfg_ao CK_INFRA_UART_O2>;
+ clocks = <&infracfg CLK_INFRA_52M_UART2_CK>;
+ assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+ <&infracfg CLK_INFRA_MUX_UART2_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+ <&topckgen CLK_TOP_UART_SEL>;
status = "disabled";
};
@@ -301,8 +294,8 @@
<0 0x10217080 0 0x80>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
clock-div = <1>;
- clocks = <&infracfg_ao CK_INFRA_I2C_BCK>,
- <&infracfg_ao CK_INFRA_66M_AP_DMA_BCK>;
+ clocks = <&infracfg CLK_INFRA_I2C_BCK>,
+ <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
clock-names = "main", "dma";
#address-cells = <1>;
#size-cells = <0>;
@@ -316,8 +309,8 @@
<0 0x10217100 0 0x80>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clock-div = <1>;
- clocks = <&infracfg_ao CK_INFRA_I2C_BCK>,
- <&infracfg_ao CK_INFRA_66M_AP_DMA_BCK>;
+ clocks = <&infracfg CLK_INFRA_I2C_BCK>,
+ <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
clock-names = "main", "dma";
#address-cells = <1>;
#size-cells = <0>;
@@ -331,8 +324,8 @@
<0 0x10217180 0 0x80>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clock-div = <1>;
- clocks = <&infracfg_ao CK_INFRA_I2C_BCK>,
- <&infracfg_ao CK_INFRA_66M_AP_DMA_BCK>;
+ clocks = <&infracfg CLK_INFRA_I2C_BCK>,
+ <&infracfg CLK_INFRA_66M_AP_DMA_BCK>;
clock-names = "main", "dma";
#address-cells = <1>;
#size-cells = <0>;
@@ -343,16 +336,16 @@
compatible = "mediatek,mt7988-pwm";
reg = <0 0x10048000 0 0x1000>;
#pwm-cells = <2>;
- clocks = <&infracfg_ao CK_INFRA_66M_PWM_BCK>,
- <&infracfg_ao CK_INFRA_66M_PWM_HCK>,
- <&infracfg_ao CK_INFRA_66M_PWM_CK1>,
- <&infracfg_ao CK_INFRA_66M_PWM_CK2>,
- <&infracfg_ao CK_INFRA_66M_PWM_CK3>,
- <&infracfg_ao CK_INFRA_66M_PWM_CK4>,
- <&infracfg_ao CK_INFRA_66M_PWM_CK5>,
- <&infracfg_ao CK_INFRA_66M_PWM_CK6>,
- <&infracfg_ao CK_INFRA_66M_PWM_CK7>,
- <&infracfg_ao CK_INFRA_66M_PWM_CK8>;
+ clocks = <&infracfg CLK_INFRA_66M_PWM_BCK>,
+ <&infracfg CLK_INFRA_66M_PWM_HCK>,
+ <&infracfg CLK_INFRA_66M_PWM_CK1>,
+ <&infracfg CLK_INFRA_66M_PWM_CK2>,
+ <&infracfg CLK_INFRA_66M_PWM_CK3>,
+ <&infracfg CLK_INFRA_66M_PWM_CK4>,
+ <&infracfg CLK_INFRA_66M_PWM_CK5>,
+ <&infracfg CLK_INFRA_66M_PWM_CK6>,
+ <&infracfg CLK_INFRA_66M_PWM_CK7>,
+ <&infracfg CLK_INFRA_66M_PWM_CK8>;
clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
"pwm4","pwm5","pwm6","pwm7","pwm8";
status = "disabled";
@@ -365,14 +358,14 @@
<0 0x11002000 0 0x1000>;
reg-names = "nfi", "ecc";
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg_ao CK_INFRA_SPINFI>,
- <&infracfg_ao CK_INFRA_NFI>,
- <&infracfg_ao CK_INFRA_66M_NFI_HCK>;
+ clocks = <&infracfg CLK_INFRA_SPINFI>,
+ <&infracfg CLK_INFRA_NFI>,
+ <&infracfg CLK_INFRA_66M_NFI_HCK>;
clock-names = "pad_clk", "nfi_clk", "nfi_hclk";
- assigned-clocks = <&topckgen CK_TOP_SPINFI_SEL>,
- <&topckgen CK_TOP_NFI1X_SEL>;
- assigned-clock-parents = <&topckgen CK_TOP_CB_M_D8>,
- <&topckgen CK_TOP_CB_M_D8>;
+ assigned-clocks = <&topckgen CLK_TOP_SPINFI_SEL>,
+ <&topckgen CLK_TOP_NFI1X_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MPLL_D8>,
+ <&topckgen CLK_TOP_MPLL_D8>;
status = "disabled";
};
@@ -408,10 +401,10 @@
"mediatek,mt7986-mmc";
reg = <0 0x11230000 0 0x1000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&infracfg_ao_cgs CK_INFRA_MSDC400>,
- <&infracfg_ao_cgs CK_INFRA_MSDC2_HCK>,
- <&infracfg_ao_cgs CK_INFRA_133M_MSDC_0_HCK>,
- <&infracfg_ao_cgs CK_INFRA_66M_MSDC_0_HCK>;
+ clocks = <&infracfg CLK_INFRA_MSDC400>,
+ <&infracfg CLK_INFRA_MSDC2_HCK>,
+ <&infracfg CLK_INFRA_133M_MSDC_0_HCK>,
+ <&infracfg CLK_INFRA_66M_MSDC_0_HCK>;
clock-names = "source", "hclk", "source_cg", "axi_cg";
status = "disabled";
};
diff --git a/arch/arm/dts/omap3-sniper-u-boot.dtsi b/arch/arm/dts/omap3-sniper-u-boot.dtsi
new file mode 100644
index 0000000..d467f53
--- /dev/null
+++ b/arch/arm/dts/omap3-sniper-u-boot.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+#include "omap3-u-boot.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart3;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+};
diff --git a/arch/arm/dts/px30-firefly.dts b/arch/arm/dts/px30-firefly.dts
index c0a8e300..e678d6a 100644
--- a/arch/arm/dts/px30-firefly.dts
+++ b/arch/arm/dts/px30-firefly.dts
@@ -13,6 +13,10 @@
model = "Firefly Core-PX30-JD4";
compatible = "rockchip,px30-firefly", "rockchip,px30";
+ aliases {
+ ethernet0 = &gmac;
+ };
+
chosen {
stdout-path = "serial2:115200n8";
};
diff --git a/arch/arm/dts/px30-u-boot.dtsi b/arch/arm/dts/px30-u-boot.dtsi
index 59fa9f4..abc6b49 100644
--- a/arch/arm/dts/px30-u-boot.dtsi
+++ b/arch/arm/dts/px30-u-boot.dtsi
@@ -99,16 +99,20 @@
&gpio0 {
bootph-all;
+ gpio-ranges = <&pinctrl 0 0 32>;
};
&gpio1 {
bootph-all;
+ gpio-ranges = <&pinctrl 0 32 32>;
};
&gpio2 {
bootph-all;
+ gpio-ranges = <&pinctrl 0 64 32>;
};
&gpio3 {
bootph-all;
+ gpio-ranges = <&pinctrl 0 96 32>;
};
diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi
deleted file mode 100644
index 3152bf1..0000000
--- a/arch/arm/dts/px30.dtsi
+++ /dev/null
@@ -1,2415 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
- */
-
-#include <dt-bindings/clock/px30-cru.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/power/px30-power.h>
-#include <dt-bindings/soc/rockchip,boot-mode.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- compatible = "rockchip,px30";
-
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &gmac;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial5 = &uart5;
- spi0 = &spi0;
- spi1 = &spi1;
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a35";
- reg = <0x0 0x0>;
- enable-method = "psci";
- clocks = <&cru ARMCLK>;
- #cooling-cells = <2>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- dynamic-power-coefficient = <90>;
- operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a35";
- reg = <0x0 0x1>;
- enable-method = "psci";
- clocks = <&cru ARMCLK>;
- #cooling-cells = <2>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- dynamic-power-coefficient = <90>;
- operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a35";
- reg = <0x0 0x2>;
- enable-method = "psci";
- clocks = <&cru ARMCLK>;
- #cooling-cells = <2>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- dynamic-power-coefficient = <90>;
- operating-points-v2 = <&cpu0_opp_table>;
- };
-
- cpu3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a35";
- reg = <0x0 0x3>;
- enable-method = "psci";
- clocks = <&cru ARMCLK>;
- #cooling-cells = <2>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- dynamic-power-coefficient = <90>;
- operating-points-v2 = <&cpu0_opp_table>;
- };
-
- idle-states {
- entry-method = "psci";
-
- CPU_SLEEP: cpu-sleep {
- compatible = "arm,idle-state";
- local-timer-stop;
- arm,psci-suspend-param = <0x0010000>;
- entry-latency-us = <120>;
- exit-latency-us = <250>;
- min-residency-us = <900>;
- };
-
- CLUSTER_SLEEP: cluster-sleep {
- compatible = "arm,idle-state";
- local-timer-stop;
- arm,psci-suspend-param = <0x1010000>;
- entry-latency-us = <400>;
- exit-latency-us = <500>;
- min-residency-us = <2000>;
- };
- };
- };
-
- cpu0_opp_table: opp-table-0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <950000 950000 1350000>;
- clock-latency-ns = <40000>;
- opp-suspend;
- };
- opp-816000000 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <1050000 1050000 1350000>;
- clock-latency-ns = <40000>;
- };
- opp-1008000000 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <1175000 1175000 1350000>;
- clock-latency-ns = <40000>;
- };
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1300000 1300000 1350000>;
- clock-latency-ns = <40000>;
- };
- opp-1296000000 {
- opp-hz = /bits/ 64 <1296000000>;
- opp-microvolt = <1350000 1350000 1350000>;
- clock-latency-ns = <40000>;
- };
- };
-
- arm-pmu {
- compatible = "arm,cortex-a35-pmu";
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
- display_subsystem: display-subsystem {
- compatible = "rockchip,display-subsystem";
- ports = <&vopb_out>, <&vopl_out>;
- status = "disabled";
- };
-
- gmac_clkin: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <50000000>;
- clock-output-names = "gmac_clkin";
- #clock-cells = <0>;
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- thermal_zones: thermal-zones {
- soc_thermal: soc-thermal {
- polling-delay-passive = <20>;
- polling-delay = <1000>;
- sustainable-power = <750>;
- thermal-sensors = <&tsadc 0>;
-
- trips {
- threshold: trip-point-0 {
- temperature = <70000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- target: trip-point-1 {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- soc_crit: soc-crit {
- temperature = <115000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&target>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- contribution = <4096>;
- };
-
- map1 {
- trip = <&target>;
- cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- contribution = <4096>;
- };
- };
- };
-
- gpu_thermal: gpu-thermal {
- polling-delay-passive = <100>; /* milliseconds */
- polling-delay = <1000>; /* milliseconds */
- thermal-sensors = <&tsadc 1>;
- };
- };
-
- xin24m: xin24m {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "xin24m";
- };
-
- pmu: power-management@ff000000 {
- compatible = "rockchip,px30-pmu", "syscon", "simple-mfd";
- reg = <0x0 0xff000000 0x0 0x1000>;
-
- power: power-controller {
- compatible = "rockchip,px30-power-controller";
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* These power domains are grouped by VD_LOGIC */
- power-domain@PX30_PD_USB {
- reg = <PX30_PD_USB>;
- clocks = <&cru HCLK_HOST>,
- <&cru HCLK_OTG>,
- <&cru SCLK_OTG_ADP>;
- pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
- #power-domain-cells = <0>;
- };
- power-domain@PX30_PD_SDCARD {
- reg = <PX30_PD_SDCARD>;
- clocks = <&cru HCLK_SDMMC>,
- <&cru SCLK_SDMMC>;
- pm_qos = <&qos_sdmmc>;
- #power-domain-cells = <0>;
- };
- power-domain@PX30_PD_GMAC {
- reg = <PX30_PD_GMAC>;
- clocks = <&cru ACLK_GMAC>,
- <&cru PCLK_GMAC>,
- <&cru SCLK_MAC_REF>,
- <&cru SCLK_GMAC_RX_TX>;
- pm_qos = <&qos_gmac>;
- #power-domain-cells = <0>;
- };
- power-domain@PX30_PD_MMC_NAND {
- reg = <PX30_PD_MMC_NAND>;
- clocks = <&cru HCLK_NANDC>,
- <&cru HCLK_EMMC>,
- <&cru HCLK_SDIO>,
- <&cru HCLK_SFC>,
- <&cru SCLK_EMMC>,
- <&cru SCLK_NANDC>,
- <&cru SCLK_SDIO>,
- <&cru SCLK_SFC>;
- pm_qos = <&qos_emmc>, <&qos_nand>,
- <&qos_sdio>, <&qos_sfc>;
- #power-domain-cells = <0>;
- };
- power-domain@PX30_PD_VPU {
- reg = <PX30_PD_VPU>;
- clocks = <&cru ACLK_VPU>,
- <&cru HCLK_VPU>,
- <&cru SCLK_CORE_VPU>;
- pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
- #power-domain-cells = <0>;
- };
- power-domain@PX30_PD_VO {
- reg = <PX30_PD_VO>;
- clocks = <&cru ACLK_RGA>,
- <&cru ACLK_VOPB>,
- <&cru ACLK_VOPL>,
- <&cru DCLK_VOPB>,
- <&cru DCLK_VOPL>,
- <&cru HCLK_RGA>,
- <&cru HCLK_VOPB>,
- <&cru HCLK_VOPL>,
- <&cru PCLK_MIPI_DSI>,
- <&cru SCLK_RGA_CORE>,
- <&cru SCLK_VOPB_PWM>;
- pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
- <&qos_vop_m0>, <&qos_vop_m1>;
- #power-domain-cells = <0>;
- };
- power-domain@PX30_PD_VI {
- reg = <PX30_PD_VI>;
- clocks = <&cru ACLK_CIF>,
- <&cru ACLK_ISP>,
- <&cru HCLK_CIF>,
- <&cru HCLK_ISP>,
- <&cru SCLK_ISP>;
- pm_qos = <&qos_isp_128>, <&qos_isp_rd>,
- <&qos_isp_wr>, <&qos_isp_m1>,
- <&qos_vip>;
- #power-domain-cells = <0>;
- };
- power-domain@PX30_PD_GPU {
- reg = <PX30_PD_GPU>;
- clocks = <&cru SCLK_GPU>;
- pm_qos = <&qos_gpu>;
- #power-domain-cells = <0>;
- };
- };
- };
-
- pmugrf: syscon@ff010000 {
- compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd";
- reg = <0x0 0xff010000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- pmu_io_domains: io-domains {
- compatible = "rockchip,px30-pmu-io-voltage-domain";
- status = "disabled";
- };
-
- reboot-mode {
- compatible = "syscon-reboot-mode";
- offset = <0x200>;
- mode-bootloader = <BOOT_BL_DOWNLOAD>;
- mode-fastboot = <BOOT_FASTBOOT>;
- mode-loader = <BOOT_BL_DOWNLOAD>;
- mode-normal = <BOOT_NORMAL>;
- mode-recovery = <BOOT_RECOVERY>;
- };
- };
-
- uart0: serial@ff030000 {
- compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff030000 0x0 0x100>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac 0>, <&dmac 1>;
- dma-names = "tx", "rx";
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "disabled";
- };
-
- i2s0_8ch: i2s@ff060000 {
- compatible = "rockchip,px30-i2s-tdm";
- reg = <0x0 0xff060000 0x0 0x1000>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_I2S0_TX>, <&cru SCLK_I2S0_RX>, <&cru HCLK_I2S0>;
- clock-names = "mclk_tx", "mclk_rx", "hclk";
- dmas = <&dmac 16>, <&dmac 17>;
- dma-names = "tx", "rx";
- rockchip,grf = <&grf>;
- resets = <&cru SRST_I2S0_TX>, <&cru SRST_I2S0_RX>;
- reset-names = "tx-m", "rx-m";
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_sclkrx
- &i2s0_8ch_lrcktx &i2s0_8ch_lrckrx
- &i2s0_8ch_sdo0 &i2s0_8ch_sdi0
- &i2s0_8ch_sdo1 &i2s0_8ch_sdi1
- &i2s0_8ch_sdo2 &i2s0_8ch_sdi2
- &i2s0_8ch_sdo3 &i2s0_8ch_sdi3>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s1_2ch: i2s@ff070000 {
- compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
- reg = <0x0 0xff070000 0x0 0x1000>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>;
- clock-names = "i2s_clk", "i2s_hclk";
- dmas = <&dmac 18>, <&dmac 19>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&i2s1_2ch_sclk &i2s1_2ch_lrck
- &i2s1_2ch_sdi &i2s1_2ch_sdo>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s2_2ch: i2s@ff080000 {
- compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
- reg = <0x0 0xff080000 0x0 0x1000>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>;
- clock-names = "i2s_clk", "i2s_hclk";
- dmas = <&dmac 20>, <&dmac 21>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&i2s2_2ch_sclk &i2s2_2ch_lrck
- &i2s2_2ch_sdi &i2s2_2ch_sdo>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- gic: interrupt-controller@ff131000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x0 0xff131000 0 0x1000>,
- <0x0 0xff132000 0 0x2000>,
- <0x0 0xff134000 0 0x2000>,
- <0x0 0xff136000 0 0x2000>;
- interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- grf: syscon@ff140000 {
- compatible = "rockchip,px30-grf", "syscon", "simple-mfd";
- reg = <0x0 0xff140000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- io_domains: io-domains {
- compatible = "rockchip,px30-io-voltage-domain";
- status = "disabled";
- };
-
- lvds: lvds {
- compatible = "rockchip,px30-lvds";
- phys = <&dsi_dphy>;
- phy-names = "dphy";
- rockchip,grf = <&grf>;
- rockchip,output = "lvds";
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- lvds_vopb_in: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_lvds>;
- };
-
- lvds_vopl_in: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_lvds>;
- };
- };
- };
- };
- };
-
- uart1: serial@ff158000 {
- compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff158000 0x0 0x100>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac 2>, <&dmac 3>;
- dma-names = "tx", "rx";
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
- status = "disabled";
- };
-
- uart2: serial@ff160000 {
- compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff160000 0x0 0x100>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac 4>, <&dmac 5>;
- dma-names = "tx", "rx";
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart2m0_xfer>;
- status = "disabled";
- };
-
- uart3: serial@ff168000 {
- compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff168000 0x0 0x100>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac 6>, <&dmac 7>;
- dma-names = "tx", "rx";
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart3m1_xfer &uart3m1_cts &uart3m1_rts>;
- status = "disabled";
- };
-
- uart4: serial@ff170000 {
- compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff170000 0x0 0x100>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac 8>, <&dmac 9>;
- dma-names = "tx", "rx";
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>;
- status = "disabled";
- };
-
- uart5: serial@ff178000 {
- compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff178000 0x0 0x100>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac 10>, <&dmac 11>;
- dma-names = "tx", "rx";
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart5_xfer &uart5_cts &uart5_rts>;
- status = "disabled";
- };
-
- i2c0: i2c@ff180000 {
- compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xff180000 0x0 0x1000>;
- clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c1: i2c@ff190000 {
- compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xff190000 0x0 0x1000>;
- clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c2: i2c@ff1a0000 {
- compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xff1a0000 0x0 0x1000>;
- clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c3: i2c@ff1b0000 {
- compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xff1b0000 0x0 0x1000>;
- clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi0: spi@ff1d0000 {
- compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff1d0000 0x0 0x1000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
- clock-names = "spiclk", "apb_pclk";
- dmas = <&dmac 12>, <&dmac 13>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi1: spi@ff1d8000 {
- compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff1d8000 0x0 0x1000>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
- clock-names = "spiclk", "apb_pclk";
- dmas = <&dmac 14>, <&dmac 15>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- wdt: watchdog@ff1e0000 {
- compatible = "rockchip,px30-wdt", "snps,dw-wdt";
- reg = <0x0 0xff1e0000 0x0 0x100>;
- clocks = <&cru PCLK_WDT_NS>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- pwm0: pwm@ff200000 {
- compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xff200000 0x0 0x10>;
- clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
- clock-names = "pwm", "pclk";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm1: pwm@ff200010 {
- compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xff200010 0x0 0x10>;
- clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
- clock-names = "pwm", "pclk";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm1_pin>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm2: pwm@ff200020 {
- compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xff200020 0x0 0x10>;
- clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
- clock-names = "pwm", "pclk";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm2_pin>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm3: pwm@ff200030 {
- compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xff200030 0x0 0x10>;
- clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
- clock-names = "pwm", "pclk";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm3_pin>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm4: pwm@ff208000 {
- compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xff208000 0x0 0x10>;
- clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
- clock-names = "pwm", "pclk";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm4_pin>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm5: pwm@ff208010 {
- compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xff208010 0x0 0x10>;
- clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
- clock-names = "pwm", "pclk";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm5_pin>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm6: pwm@ff208020 {
- compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xff208020 0x0 0x10>;
- clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
- clock-names = "pwm", "pclk";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm6_pin>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm7: pwm@ff208030 {
- compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xff208030 0x0 0x10>;
- clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
- clock-names = "pwm", "pclk";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm7_pin>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- rktimer: timer@ff210000 {
- compatible = "rockchip,px30-timer", "rockchip,rk3288-timer";
- reg = <0x0 0xff210000 0x0 0x1000>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
- clock-names = "pclk", "timer";
- };
-
- dmac: dma-controller@ff240000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff240000 0x0 0x4000>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
-
- tsadc: tsadc@ff280000 {
- compatible = "rockchip,px30-tsadc";
- reg = <0x0 0xff280000 0x0 0x100>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- assigned-clocks = <&cru SCLK_TSADC>;
- assigned-clock-rates = <50000>;
- clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
- clock-names = "tsadc", "apb_pclk";
- resets = <&cru SRST_TSADC>;
- reset-names = "tsadc-apb";
- rockchip,grf = <&grf>;
- rockchip,hw-tshut-temp = <120000>;
- pinctrl-names = "init", "default", "sleep";
- pinctrl-0 = <&tsadc_otp_pin>;
- pinctrl-1 = <&tsadc_otp_out>;
- pinctrl-2 = <&tsadc_otp_pin>;
- #thermal-sensor-cells = <1>;
- status = "disabled";
- };
-
- saradc: saradc@ff288000 {
- compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
- reg = <0x0 0xff288000 0x0 0x100>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- #io-channel-cells = <1>;
- clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
- clock-names = "saradc", "apb_pclk";
- resets = <&cru SRST_SARADC_P>;
- reset-names = "saradc-apb";
- status = "disabled";
- };
-
- otp: nvmem@ff290000 {
- compatible = "rockchip,px30-otp";
- reg = <0x0 0xff290000 0x0 0x4000>;
- clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>,
- <&cru PCLK_OTP_PHY>;
- clock-names = "otp", "apb_pclk", "phy";
- resets = <&cru SRST_OTP_PHY>;
- reset-names = "phy";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* Data cells */
- cpu_id: id@7 {
- reg = <0x07 0x10>;
- };
- cpu_leakage: cpu-leakage@17 {
- reg = <0x17 0x1>;
- };
- performance: performance@1e {
- reg = <0x1e 0x1>;
- bits = <4 3>;
- };
- };
-
- cru: clock-controller@ff2b0000 {
- compatible = "rockchip,px30-cru";
- reg = <0x0 0xff2b0000 0x0 0x1000>;
- clocks = <&xin24m>, <&pmucru PLL_GPLL>;
- clock-names = "xin24m", "gpll";
- rockchip,grf = <&grf>;
- #clock-cells = <1>;
- #reset-cells = <1>;
-
- assigned-clocks = <&cru PLL_NPLL>,
- <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
- <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
- <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
-
- assigned-clock-rates = <1188000000>,
- <200000000>, <200000000>,
- <150000000>, <150000000>,
- <100000000>, <200000000>;
- };
-
- pmucru: clock-controller@ff2bc000 {
- compatible = "rockchip,px30-pmucru";
- reg = <0x0 0xff2bc000 0x0 0x1000>;
- clocks = <&xin24m>;
- clock-names = "xin24m";
- rockchip,grf = <&grf>;
- #clock-cells = <1>;
- #reset-cells = <1>;
-
- assigned-clocks =
- <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>,
- <&pmucru SCLK_WIFI_PMU>;
- assigned-clock-rates =
- <1200000000>, <100000000>,
- <26000000>;
- };
-
- usb2phy_grf: syscon@ff2c0000 {
- compatible = "rockchip,px30-usb2phy-grf", "syscon",
- "simple-mfd";
- reg = <0x0 0xff2c0000 0x0 0x10000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- u2phy: usb2phy@100 {
- compatible = "rockchip,px30-usb2phy";
- reg = <0x100 0x20>;
- clocks = <&pmucru SCLK_USBPHY_REF>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- assigned-clocks = <&cru USB480M>;
- assigned-clock-parents = <&u2phy>;
- clock-output-names = "usb480m_phy";
- status = "disabled";
-
- u2phy_host: host-port {
- #phy-cells = <0>;
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "linestate";
- status = "disabled";
- };
-
- u2phy_otg: otg-port {
- #phy-cells = <0>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "otg-bvalid", "otg-id",
- "linestate";
- status = "disabled";
- };
- };
- };
-
- dsi_dphy: phy@ff2e0000 {
- compatible = "rockchip,px30-dsi-dphy";
- reg = <0x0 0xff2e0000 0x0 0x10000>;
- clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>;
- clock-names = "ref", "pclk";
- resets = <&cru SRST_MIPIDSIPHY_P>;
- reset-names = "apb";
- #phy-cells = <0>;
- power-domains = <&power PX30_PD_VO>;
- status = "disabled";
- };
-
- csi_dphy: phy@ff2f0000 {
- compatible = "rockchip,px30-csi-dphy";
- reg = <0x0 0xff2f0000 0x0 0x4000>;
- clocks = <&cru PCLK_MIPICSIPHY>;
- clock-names = "pclk";
- #phy-cells = <0>;
- power-domains = <&power PX30_PD_VI>;
- resets = <&cru SRST_MIPICSIPHY_P>;
- reset-names = "apb";
- rockchip,grf = <&grf>;
- status = "disabled";
- };
-
- usb20_otg: usb@ff300000 {
- compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
- "snps,dwc2";
- reg = <0x0 0xff300000 0x0 0x40000>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_OTG>;
- clock-names = "otg";
- dr_mode = "otg";
- g-np-tx-fifo-size = <16>;
- g-rx-fifo-size = <280>;
- g-tx-fifo-size = <256 128 128 64 32 16>;
- phys = <&u2phy_otg>;
- phy-names = "usb2-phy";
- power-domains = <&power PX30_PD_USB>;
- status = "disabled";
- };
-
- usb_host0_ehci: usb@ff340000 {
- compatible = "generic-ehci";
- reg = <0x0 0xff340000 0x0 0x10000>;
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_HOST>;
- phys = <&u2phy_host>;
- phy-names = "usb";
- power-domains = <&power PX30_PD_USB>;
- status = "disabled";
- };
-
- usb_host0_ohci: usb@ff350000 {
- compatible = "generic-ohci";
- reg = <0x0 0xff350000 0x0 0x10000>;
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_HOST>;
- phys = <&u2phy_host>;
- phy-names = "usb";
- power-domains = <&power PX30_PD_USB>;
- status = "disabled";
- };
-
- gmac: ethernet@ff360000 {
- compatible = "rockchip,px30-gmac";
- reg = <0x0 0xff360000 0x0 0x10000>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- clocks = <&cru SCLK_GMAC>, <&cru SCLK_GMAC_RX_TX>,
- <&cru SCLK_GMAC_RX_TX>, <&cru SCLK_MAC_REF>,
- <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
- <&cru PCLK_GMAC>, <&cru SCLK_GMAC_RMII>;
- clock-names = "stmmaceth", "mac_clk_rx",
- "mac_clk_tx", "clk_mac_ref",
- "clk_mac_refout", "aclk_mac",
- "pclk_mac", "clk_mac_speed";
- rockchip,grf = <&grf>;
- phy-mode = "rmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rmii_pins &mac_refclk_12ma>;
- power-domains = <&power PX30_PD_GMAC>;
- resets = <&cru SRST_GMAC_A>;
- reset-names = "stmmaceth";
- status = "disabled";
- };
-
- sdmmc: mmc@ff370000 {
- compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xff370000 0x0 0x4000>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
- <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- bus-width = <4>;
- fifo-depth = <0x100>;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
- power-domains = <&power PX30_PD_SDCARD>;
- status = "disabled";
- };
-
- sdio: mmc@ff380000 {
- compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xff380000 0x0 0x4000>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
- <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- bus-width = <4>;
- fifo-depth = <0x100>;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>;
- power-domains = <&power PX30_PD_MMC_NAND>;
- status = "disabled";
- };
-
- emmc: mmc@ff390000 {
- compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xff390000 0x0 0x4000>;
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
- <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- bus-width = <8>;
- fifo-depth = <0x100>;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
- power-domains = <&power PX30_PD_MMC_NAND>;
- status = "disabled";
- };
-
- sfc: spi@ff3a0000 {
- compatible = "rockchip,sfc";
- reg = <0x0 0xff3a0000 0x0 0x4000>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
- clock-names = "clk_sfc", "hclk_sfc";
- pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
- pinctrl-names = "default";
- power-domains = <&power PX30_PD_MMC_NAND>;
- status = "disabled";
- };
-
- nfc: nand-controller@ff3b0000 {
- compatible = "rockchip,px30-nfc";
- reg = <0x0 0xff3b0000 0x0 0x4000>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
- clock-names = "ahb", "nfc";
- assigned-clocks = <&cru SCLK_NANDC>;
- assigned-clock-rates = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0
- &flash_rdn &flash_rdy &flash_wrn &flash_dqs>;
- power-domains = <&power PX30_PD_MMC_NAND>;
- status = "disabled";
- };
-
- gpu_opp_table: opp-table-1 {
- compatible = "operating-points-v2";
-
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- opp-microvolt = <950000>;
- };
- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- opp-microvolt = <975000>;
- };
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <1050000>;
- };
- opp-480000000 {
- opp-hz = /bits/ 64 <480000000>;
- opp-microvolt = <1125000>;
- };
- };
-
- gpu: gpu@ff400000 {
- compatible = "rockchip,px30-mali", "arm,mali-bifrost";
- reg = <0x0 0xff400000 0x0 0x4000>;
- interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "job", "mmu", "gpu";
- clocks = <&cru SCLK_GPU>;
- #cooling-cells = <2>;
- power-domains = <&power PX30_PD_GPU>;
- operating-points-v2 = <&gpu_opp_table>;
- status = "disabled";
- };
-
- vpu: video-codec@ff442000 {
- compatible = "rockchip,px30-vpu";
- reg = <0x0 0xff442000 0x0 0x800>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "vepu", "vdpu";
- clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
- clock-names = "aclk", "hclk";
- iommus = <&vpu_mmu>;
- power-domains = <&power PX30_PD_VPU>;
- };
-
- vpu_mmu: iommu@ff442800 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff442800 0x0 0x100>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
- clock-names = "aclk", "iface";
- #iommu-cells = <0>;
- power-domains = <&power PX30_PD_VPU>;
- };
-
- dsi: dsi@ff450000 {
- compatible = "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi";
- reg = <0x0 0xff450000 0x0 0x10000>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_MIPI_DSI>;
- clock-names = "pclk";
- phys = <&dsi_dphy>;
- phy-names = "dphy";
- power-domains = <&power PX30_PD_VO>;
- resets = <&cru SRST_MIPIDSI_HOST_P>;
- reset-names = "apb";
- rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- dsi_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_dsi>;
- };
-
- dsi_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_dsi>;
- };
- };
- };
- };
-
- vopb: vop@ff460000 {
- compatible = "rockchip,px30-vop-big";
- reg = <0x0 0xff460000 0x0 0xefc>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru ACLK_VOPB>, <&cru DCLK_VOPB>,
- <&cru HCLK_VOPB>;
- clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
- resets = <&cru SRST_VOPB_A>, <&cru SRST_VOPB_H>, <&cru SRST_VOPB>;
- reset-names = "axi", "ahb", "dclk";
- iommus = <&vopb_mmu>;
- power-domains = <&power PX30_PD_VO>;
- status = "disabled";
-
- vopb_out: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vopb_out_dsi: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&dsi_in_vopb>;
- };
-
- vopb_out_lvds: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&lvds_vopb_in>;
- };
- };
- };
-
- vopb_mmu: iommu@ff460f00 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff460f00 0x0 0x100>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>;
- clock-names = "aclk", "iface";
- power-domains = <&power PX30_PD_VO>;
- #iommu-cells = <0>;
- status = "disabled";
- };
-
- vopl: vop@ff470000 {
- compatible = "rockchip,px30-vop-lit";
- reg = <0x0 0xff470000 0x0 0xefc>;
- interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru ACLK_VOPL>, <&cru DCLK_VOPL>,
- <&cru HCLK_VOPL>;
- clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
- resets = <&cru SRST_VOPL_A>, <&cru SRST_VOPL_H>, <&cru SRST_VOPL>;
- reset-names = "axi", "ahb", "dclk";
- iommus = <&vopl_mmu>;
- power-domains = <&power PX30_PD_VO>;
- status = "disabled";
-
- vopl_out: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vopl_out_dsi: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&dsi_in_vopl>;
- };
-
- vopl_out_lvds: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&lvds_vopl_in>;
- };
- };
- };
-
- vopl_mmu: iommu@ff470f00 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff470f00 0x0 0x100>;
- interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
- clock-names = "aclk", "iface";
- power-domains = <&power PX30_PD_VO>;
- #iommu-cells = <0>;
- status = "disabled";
- };
-
- isp: isp@ff4a0000 {
- compatible = "rockchip,px30-cif-isp"; /*rk3326-rkisp1*/
- reg = <0x0 0xff4a0000 0x0 0x8000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "isp", "mi", "mipi";
- clocks = <&cru SCLK_ISP>,
- <&cru ACLK_ISP>,
- <&cru HCLK_ISP>,
- <&cru PCLK_ISP>;
- clock-names = "isp", "aclk", "hclk", "pclk";
- iommus = <&isp_mmu>;
- phys = <&csi_dphy>;
- phy-names = "dphy";
- power-domains = <&power PX30_PD_VI>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
- };
-
- isp_mmu: iommu@ff4a8000 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff4a8000 0x0 0x100>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
- clock-names = "aclk", "iface";
- power-domains = <&power PX30_PD_VI>;
- rockchip,disable-mmu-reset;
- #iommu-cells = <0>;
- };
-
- qos_gmac: qos@ff518000 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff518000 0x0 0x20>;
- };
-
- qos_gpu: qos@ff520000 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff520000 0x0 0x20>;
- };
-
- qos_sdmmc: qos@ff52c000 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff52c000 0x0 0x20>;
- };
-
- qos_emmc: qos@ff538000 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff538000 0x0 0x20>;
- };
-
- qos_nand: qos@ff538080 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff538080 0x0 0x20>;
- };
-
- qos_sdio: qos@ff538100 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff538100 0x0 0x20>;
- };
-
- qos_sfc: qos@ff538180 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff538180 0x0 0x20>;
- };
-
- qos_usb_host: qos@ff540000 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff540000 0x0 0x20>;
- };
-
- qos_usb_otg: qos@ff540080 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff540080 0x0 0x20>;
- };
-
- qos_isp_128: qos@ff548000 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff548000 0x0 0x20>;
- };
-
- qos_isp_rd: qos@ff548080 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff548080 0x0 0x20>;
- };
-
- qos_isp_wr: qos@ff548100 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff548100 0x0 0x20>;
- };
-
- qos_isp_m1: qos@ff548180 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff548180 0x0 0x20>;
- };
-
- qos_vip: qos@ff548200 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff548200 0x0 0x20>;
- };
-
- qos_rga_rd: qos@ff550000 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff550000 0x0 0x20>;
- };
-
- qos_rga_wr: qos@ff550080 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff550080 0x0 0x20>;
- };
-
- qos_vop_m0: qos@ff550100 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff550100 0x0 0x20>;
- };
-
- qos_vop_m1: qos@ff550180 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff550180 0x0 0x20>;
- };
-
- qos_vpu: qos@ff558000 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff558000 0x0 0x20>;
- };
-
- qos_vpu_r128: qos@ff558080 {
- compatible = "rockchip,px30-qos", "syscon";
- reg = <0x0 0xff558080 0x0 0x20>;
- };
-
- pinctrl: pinctrl {
- compatible = "rockchip,px30-pinctrl";
- rockchip,grf = <&grf>;
- rockchip,pmu = <&pmugrf>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio0: gpio@ff040000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff040000 0x0 0x100>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pmucru PCLK_GPIO0_PMU>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 0 32>;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio1: gpio@ff250000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff250000 0x0 0x100>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO1>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 32 32>;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@ff260000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff260000 0x0 0x100>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO2>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 64 32>;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@ff270000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff270000 0x0 0x100>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO3>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 96 32>;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pcfg_pull_up: pcfg-pull-up {
- bias-pull-up;
- };
-
- pcfg_pull_down: pcfg-pull-down {
- bias-pull-down;
- };
-
- pcfg_pull_none: pcfg-pull-none {
- bias-disable;
- };
-
- pcfg_pull_none_2ma: pcfg-pull-none-2ma {
- bias-disable;
- drive-strength = <2>;
- };
-
- pcfg_pull_up_2ma: pcfg-pull-up-2ma {
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pcfg_pull_up_4ma: pcfg-pull-up-4ma {
- bias-pull-up;
- drive-strength = <4>;
- };
-
- pcfg_pull_none_4ma: pcfg-pull-none-4ma {
- bias-disable;
- drive-strength = <4>;
- };
-
- pcfg_pull_down_4ma: pcfg-pull-down-4ma {
- bias-pull-down;
- drive-strength = <4>;
- };
-
- pcfg_pull_none_8ma: pcfg-pull-none-8ma {
- bias-disable;
- drive-strength = <8>;
- };
-
- pcfg_pull_up_8ma: pcfg-pull-up-8ma {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- pcfg_pull_none_12ma: pcfg-pull-none-12ma {
- bias-disable;
- drive-strength = <12>;
- };
-
- pcfg_pull_up_12ma: pcfg-pull-up-12ma {
- bias-pull-up;
- drive-strength = <12>;
- };
-
- pcfg_pull_none_smt: pcfg-pull-none-smt {
- bias-disable;
- input-schmitt-enable;
- };
-
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- pcfg_output_low: pcfg-output-low {
- output-low;
- };
-
- pcfg_input_high: pcfg-input-high {
- bias-pull-up;
- input-enable;
- };
-
- pcfg_input: pcfg-input {
- input-enable;
- };
-
- i2c0 {
- i2c0_xfer: i2c0-xfer {
- rockchip,pins =
- <0 RK_PB0 1 &pcfg_pull_none_smt>,
- <0 RK_PB1 1 &pcfg_pull_none_smt>;
- };
- };
-
- i2c1 {
- i2c1_xfer: i2c1-xfer {
- rockchip,pins =
- <0 RK_PC2 1 &pcfg_pull_none_smt>,
- <0 RK_PC3 1 &pcfg_pull_none_smt>;
- };
- };
-
- i2c2 {
- i2c2_xfer: i2c2-xfer {
- rockchip,pins =
- <2 RK_PB7 2 &pcfg_pull_none_smt>,
- <2 RK_PC0 2 &pcfg_pull_none_smt>;
- };
- };
-
- i2c3 {
- i2c3_xfer: i2c3-xfer {
- rockchip,pins =
- <1 RK_PB4 4 &pcfg_pull_none_smt>,
- <1 RK_PB5 4 &pcfg_pull_none_smt>;
- };
- };
-
- tsadc {
- tsadc_otp_pin: tsadc-otp-pin {
- rockchip,pins =
- <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- tsadc_otp_out: tsadc-otp-out {
- rockchip,pins =
- <0 RK_PA6 1 &pcfg_pull_none>;
- };
- };
-
- uart0 {
- uart0_xfer: uart0-xfer {
- rockchip,pins =
- <0 RK_PB2 1 &pcfg_pull_up>,
- <0 RK_PB3 1 &pcfg_pull_up>;
- };
-
- uart0_cts: uart0-cts {
- rockchip,pins =
- <0 RK_PB4 1 &pcfg_pull_none>;
- };
-
- uart0_rts: uart0-rts {
- rockchip,pins =
- <0 RK_PB5 1 &pcfg_pull_none>;
- };
- };
-
- uart1 {
- uart1_xfer: uart1-xfer {
- rockchip,pins =
- <1 RK_PC1 1 &pcfg_pull_up>,
- <1 RK_PC0 1 &pcfg_pull_up>;
- };
-
- uart1_cts: uart1-cts {
- rockchip,pins =
- <1 RK_PC2 1 &pcfg_pull_none>;
- };
-
- uart1_rts: uart1-rts {
- rockchip,pins =
- <1 RK_PC3 1 &pcfg_pull_none>;
- };
- };
-
- uart2-m0 {
- uart2m0_xfer: uart2m0-xfer {
- rockchip,pins =
- <1 RK_PD2 2 &pcfg_pull_up>,
- <1 RK_PD3 2 &pcfg_pull_up>;
- };
- };
-
- uart2-m1 {
- uart2m1_xfer: uart2m1-xfer {
- rockchip,pins =
- <2 RK_PB4 2 &pcfg_pull_up>,
- <2 RK_PB6 2 &pcfg_pull_up>;
- };
- };
-
- uart3-m0 {
- uart3m0_xfer: uart3m0-xfer {
- rockchip,pins =
- <0 RK_PC0 2 &pcfg_pull_up>,
- <0 RK_PC1 2 &pcfg_pull_up>;
- };
-
- uart3m0_cts: uart3m0-cts {
- rockchip,pins =
- <0 RK_PC2 2 &pcfg_pull_none>;
- };
-
- uart3m0_rts: uart3m0-rts {
- rockchip,pins =
- <0 RK_PC3 2 &pcfg_pull_none>;
- };
- };
-
- uart3-m1 {
- uart3m1_xfer: uart3m1-xfer {
- rockchip,pins =
- <1 RK_PB6 2 &pcfg_pull_up>,
- <1 RK_PB7 2 &pcfg_pull_up>;
- };
-
- uart3m1_cts: uart3m1-cts {
- rockchip,pins =
- <1 RK_PB4 2 &pcfg_pull_none>;
- };
-
- uart3m1_rts: uart3m1-rts {
- rockchip,pins =
- <1 RK_PB5 2 &pcfg_pull_none>;
- };
- };
-
- uart4 {
- uart4_xfer: uart4-xfer {
- rockchip,pins =
- <1 RK_PD4 2 &pcfg_pull_up>,
- <1 RK_PD5 2 &pcfg_pull_up>;
- };
-
- uart4_cts: uart4-cts {
- rockchip,pins =
- <1 RK_PD6 2 &pcfg_pull_none>;
- };
-
- uart4_rts: uart4-rts {
- rockchip,pins =
- <1 RK_PD7 2 &pcfg_pull_none>;
- };
- };
-
- uart5 {
- uart5_xfer: uart5-xfer {
- rockchip,pins =
- <3 RK_PA2 4 &pcfg_pull_up>,
- <3 RK_PA1 4 &pcfg_pull_up>;
- };
-
- uart5_cts: uart5-cts {
- rockchip,pins =
- <3 RK_PA3 4 &pcfg_pull_none>;
- };
-
- uart5_rts: uart5-rts {
- rockchip,pins =
- <3 RK_PA5 4 &pcfg_pull_none>;
- };
- };
-
- spi0 {
- spi0_clk: spi0-clk {
- rockchip,pins =
- <1 RK_PB7 3 &pcfg_pull_up_4ma>;
- };
-
- spi0_csn: spi0-csn {
- rockchip,pins =
- <1 RK_PB6 3 &pcfg_pull_up_4ma>;
- };
-
- spi0_miso: spi0-miso {
- rockchip,pins =
- <1 RK_PB5 3 &pcfg_pull_up_4ma>;
- };
-
- spi0_mosi: spi0-mosi {
- rockchip,pins =
- <1 RK_PB4 3 &pcfg_pull_up_4ma>;
- };
-
- spi0_clk_hs: spi0-clk-hs {
- rockchip,pins =
- <1 RK_PB7 3 &pcfg_pull_up_8ma>;
- };
-
- spi0_miso_hs: spi0-miso-hs {
- rockchip,pins =
- <1 RK_PB5 3 &pcfg_pull_up_8ma>;
- };
-
- spi0_mosi_hs: spi0-mosi-hs {
- rockchip,pins =
- <1 RK_PB4 3 &pcfg_pull_up_8ma>;
- };
- };
-
- spi1 {
- spi1_clk: spi1-clk {
- rockchip,pins =
- <3 RK_PB7 4 &pcfg_pull_up_4ma>;
- };
-
- spi1_csn0: spi1-csn0 {
- rockchip,pins =
- <3 RK_PB1 4 &pcfg_pull_up_4ma>;
- };
-
- spi1_csn1: spi1-csn1 {
- rockchip,pins =
- <3 RK_PB2 2 &pcfg_pull_up_4ma>;
- };
-
- spi1_miso: spi1-miso {
- rockchip,pins =
- <3 RK_PB6 4 &pcfg_pull_up_4ma>;
- };
-
- spi1_mosi: spi1-mosi {
- rockchip,pins =
- <3 RK_PB4 4 &pcfg_pull_up_4ma>;
- };
-
- spi1_clk_hs: spi1-clk-hs {
- rockchip,pins =
- <3 RK_PB7 4 &pcfg_pull_up_8ma>;
- };
-
- spi1_miso_hs: spi1-miso-hs {
- rockchip,pins =
- <3 RK_PB6 4 &pcfg_pull_up_8ma>;
- };
-
- spi1_mosi_hs: spi1-mosi-hs {
- rockchip,pins =
- <3 RK_PB4 4 &pcfg_pull_up_8ma>;
- };
- };
-
- pdm {
- pdm_clk0m0: pdm-clk0m0 {
- rockchip,pins =
- <3 RK_PC6 2 &pcfg_pull_none>;
- };
-
- pdm_clk0m1: pdm-clk0m1 {
- rockchip,pins =
- <2 RK_PC6 1 &pcfg_pull_none>;
- };
-
- pdm_clk1: pdm-clk1 {
- rockchip,pins =
- <3 RK_PC7 2 &pcfg_pull_none>;
- };
-
- pdm_sdi0m0: pdm-sdi0m0 {
- rockchip,pins =
- <3 RK_PD3 2 &pcfg_pull_none>;
- };
-
- pdm_sdi0m1: pdm-sdi0m1 {
- rockchip,pins =
- <2 RK_PC5 2 &pcfg_pull_none>;
- };
-
- pdm_sdi1: pdm-sdi1 {
- rockchip,pins =
- <3 RK_PD0 2 &pcfg_pull_none>;
- };
-
- pdm_sdi2: pdm-sdi2 {
- rockchip,pins =
- <3 RK_PD1 2 &pcfg_pull_none>;
- };
-
- pdm_sdi3: pdm-sdi3 {
- rockchip,pins =
- <3 RK_PD2 2 &pcfg_pull_none>;
- };
-
- pdm_clk0m0_sleep: pdm-clk0m0-sleep {
- rockchip,pins =
- <3 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
- };
-
- pdm_clk0m_sleep1: pdm-clk0m1-sleep {
- rockchip,pins =
- <2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
- };
-
- pdm_clk1_sleep: pdm-clk1-sleep {
- rockchip,pins =
- <3 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
- };
-
- pdm_sdi0m0_sleep: pdm-sdi0m0-sleep {
- rockchip,pins =
- <3 RK_PD3 RK_FUNC_GPIO &pcfg_input_high>;
- };
-
- pdm_sdi0m1_sleep: pdm-sdi0m1-sleep {
- rockchip,pins =
- <2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
- };
-
- pdm_sdi1_sleep: pdm-sdi1-sleep {
- rockchip,pins =
- <3 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>;
- };
-
- pdm_sdi2_sleep: pdm-sdi2-sleep {
- rockchip,pins =
- <3 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
- };
-
- pdm_sdi3_sleep: pdm-sdi3-sleep {
- rockchip,pins =
- <3 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>;
- };
- };
-
- i2s0 {
- i2s0_8ch_mclk: i2s0-8ch-mclk {
- rockchip,pins =
- <3 RK_PC1 2 &pcfg_pull_none>;
- };
-
- i2s0_8ch_sclktx: i2s0-8ch-sclktx {
- rockchip,pins =
- <3 RK_PC3 2 &pcfg_pull_none>;
- };
-
- i2s0_8ch_sclkrx: i2s0-8ch-sclkrx {
- rockchip,pins =
- <3 RK_PB4 2 &pcfg_pull_none>;
- };
-
- i2s0_8ch_lrcktx: i2s0-8ch-lrcktx {
- rockchip,pins =
- <3 RK_PC2 2 &pcfg_pull_none>;
- };
-
- i2s0_8ch_lrckrx: i2s0-8ch-lrckrx {
- rockchip,pins =
- <3 RK_PB5 2 &pcfg_pull_none>;
- };
-
- i2s0_8ch_sdo0: i2s0-8ch-sdo0 {
- rockchip,pins =
- <3 RK_PC4 2 &pcfg_pull_none>;
- };
-
- i2s0_8ch_sdo1: i2s0-8ch-sdo1 {
- rockchip,pins =
- <3 RK_PC0 2 &pcfg_pull_none>;
- };
-
- i2s0_8ch_sdo2: i2s0-8ch-sdo2 {
- rockchip,pins =
- <3 RK_PB7 2 &pcfg_pull_none>;
- };
-
- i2s0_8ch_sdo3: i2s0-8ch-sdo3 {
- rockchip,pins =
- <3 RK_PB6 2 &pcfg_pull_none>;
- };
-
- i2s0_8ch_sdi0: i2s0-8ch-sdi0 {
- rockchip,pins =
- <3 RK_PC5 2 &pcfg_pull_none>;
- };
-
- i2s0_8ch_sdi1: i2s0-8ch-sdi1 {
- rockchip,pins =
- <3 RK_PB3 2 &pcfg_pull_none>;
- };
-
- i2s0_8ch_sdi2: i2s0-8ch-sdi2 {
- rockchip,pins =
- <3 RK_PB1 2 &pcfg_pull_none>;
- };
-
- i2s0_8ch_sdi3: i2s0-8ch-sdi3 {
- rockchip,pins =
- <3 RK_PB0 2 &pcfg_pull_none>;
- };
- };
-
- i2s1 {
- i2s1_2ch_mclk: i2s1-2ch-mclk {
- rockchip,pins =
- <2 RK_PC3 1 &pcfg_pull_none>;
- };
-
- i2s1_2ch_sclk: i2s1-2ch-sclk {
- rockchip,pins =
- <2 RK_PC2 1 &pcfg_pull_none>;
- };
-
- i2s1_2ch_lrck: i2s1-2ch-lrck {
- rockchip,pins =
- <2 RK_PC1 1 &pcfg_pull_none>;
- };
-
- i2s1_2ch_sdi: i2s1-2ch-sdi {
- rockchip,pins =
- <2 RK_PC5 1 &pcfg_pull_none>;
- };
-
- i2s1_2ch_sdo: i2s1-2ch-sdo {
- rockchip,pins =
- <2 RK_PC4 1 &pcfg_pull_none>;
- };
- };
-
- i2s2 {
- i2s2_2ch_mclk: i2s2-2ch-mclk {
- rockchip,pins =
- <3 RK_PA1 2 &pcfg_pull_none>;
- };
-
- i2s2_2ch_sclk: i2s2-2ch-sclk {
- rockchip,pins =
- <3 RK_PA2 2 &pcfg_pull_none>;
- };
-
- i2s2_2ch_lrck: i2s2-2ch-lrck {
- rockchip,pins =
- <3 RK_PA3 2 &pcfg_pull_none>;
- };
-
- i2s2_2ch_sdi: i2s2-2ch-sdi {
- rockchip,pins =
- <3 RK_PA5 2 &pcfg_pull_none>;
- };
-
- i2s2_2ch_sdo: i2s2-2ch-sdo {
- rockchip,pins =
- <3 RK_PA7 2 &pcfg_pull_none>;
- };
- };
-
- sdmmc {
- sdmmc_clk: sdmmc-clk {
- rockchip,pins =
- <1 RK_PD6 1 &pcfg_pull_none_8ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins =
- <1 RK_PD7 1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_det: sdmmc-det {
- rockchip,pins =
- <0 RK_PA3 1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins =
- <1 RK_PD2 1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins =
- <1 RK_PD2 1 &pcfg_pull_up_8ma>,
- <1 RK_PD3 1 &pcfg_pull_up_8ma>,
- <1 RK_PD4 1 &pcfg_pull_up_8ma>,
- <1 RK_PD5 1 &pcfg_pull_up_8ma>;
- };
- };
-
- sdio {
- sdio_clk: sdio-clk {
- rockchip,pins =
- <1 RK_PC5 1 &pcfg_pull_none>;
- };
-
- sdio_cmd: sdio-cmd {
- rockchip,pins =
- <1 RK_PC4 1 &pcfg_pull_up>;
- };
-
- sdio_bus4: sdio-bus4 {
- rockchip,pins =
- <1 RK_PC6 1 &pcfg_pull_up>,
- <1 RK_PC7 1 &pcfg_pull_up>,
- <1 RK_PD0 1 &pcfg_pull_up>,
- <1 RK_PD1 1 &pcfg_pull_up>;
- };
- };
-
- emmc {
- emmc_clk: emmc-clk {
- rockchip,pins =
- <1 RK_PB1 2 &pcfg_pull_none_8ma>;
- };
-
- emmc_cmd: emmc-cmd {
- rockchip,pins =
- <1 RK_PB2 2 &pcfg_pull_up_8ma>;
- };
-
- emmc_rstnout: emmc-rstnout {
- rockchip,pins =
- <1 RK_PB3 2 &pcfg_pull_none>;
- };
-
- emmc_bus1: emmc-bus1 {
- rockchip,pins =
- <1 RK_PA0 2 &pcfg_pull_up_8ma>;
- };
-
- emmc_bus4: emmc-bus4 {
- rockchip,pins =
- <1 RK_PA0 2 &pcfg_pull_up_8ma>,
- <1 RK_PA1 2 &pcfg_pull_up_8ma>,
- <1 RK_PA2 2 &pcfg_pull_up_8ma>,
- <1 RK_PA3 2 &pcfg_pull_up_8ma>;
- };
-
- emmc_bus8: emmc-bus8 {
- rockchip,pins =
- <1 RK_PA0 2 &pcfg_pull_up_8ma>,
- <1 RK_PA1 2 &pcfg_pull_up_8ma>,
- <1 RK_PA2 2 &pcfg_pull_up_8ma>,
- <1 RK_PA3 2 &pcfg_pull_up_8ma>,
- <1 RK_PA4 2 &pcfg_pull_up_8ma>,
- <1 RK_PA5 2 &pcfg_pull_up_8ma>,
- <1 RK_PA6 2 &pcfg_pull_up_8ma>,
- <1 RK_PA7 2 &pcfg_pull_up_8ma>;
- };
- };
-
- flash {
- flash_cs0: flash-cs0 {
- rockchip,pins =
- <1 RK_PB0 1 &pcfg_pull_none>;
- };
-
- flash_rdy: flash-rdy {
- rockchip,pins =
- <1 RK_PB1 1 &pcfg_pull_none>;
- };
-
- flash_dqs: flash-dqs {
- rockchip,pins =
- <1 RK_PB2 1 &pcfg_pull_none>;
- };
-
- flash_ale: flash-ale {
- rockchip,pins =
- <1 RK_PB3 1 &pcfg_pull_none>;
- };
-
- flash_cle: flash-cle {
- rockchip,pins =
- <1 RK_PB4 1 &pcfg_pull_none>;
- };
-
- flash_wrn: flash-wrn {
- rockchip,pins =
- <1 RK_PB5 1 &pcfg_pull_none>;
- };
-
- flash_csl: flash-csl {
- rockchip,pins =
- <1 RK_PB6 1 &pcfg_pull_none>;
- };
-
- flash_rdn: flash-rdn {
- rockchip,pins =
- <1 RK_PB7 1 &pcfg_pull_none>;
- };
-
- flash_bus8: flash-bus8 {
- rockchip,pins =
- <1 RK_PA0 1 &pcfg_pull_up_12ma>,
- <1 RK_PA1 1 &pcfg_pull_up_12ma>,
- <1 RK_PA2 1 &pcfg_pull_up_12ma>,
- <1 RK_PA3 1 &pcfg_pull_up_12ma>,
- <1 RK_PA4 1 &pcfg_pull_up_12ma>,
- <1 RK_PA5 1 &pcfg_pull_up_12ma>,
- <1 RK_PA6 1 &pcfg_pull_up_12ma>,
- <1 RK_PA7 1 &pcfg_pull_up_12ma>;
- };
- };
-
- sfc {
- sfc_bus4: sfc-bus4 {
- rockchip,pins =
- <1 RK_PA0 3 &pcfg_pull_none>,
- <1 RK_PA1 3 &pcfg_pull_none>,
- <1 RK_PA2 3 &pcfg_pull_none>,
- <1 RK_PA3 3 &pcfg_pull_none>;
- };
-
- sfc_bus2: sfc-bus2 {
- rockchip,pins =
- <1 RK_PA0 3 &pcfg_pull_none>,
- <1 RK_PA1 3 &pcfg_pull_none>;
- };
-
- sfc_cs0: sfc-cs0 {
- rockchip,pins =
- <1 RK_PA4 3 &pcfg_pull_none>;
- };
-
- sfc_clk: sfc-clk {
- rockchip,pins =
- <1 RK_PB1 3 &pcfg_pull_none>;
- };
- };
-
- lcdc {
- lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin {
- rockchip,pins =
- <3 RK_PA0 1 &pcfg_pull_none_12ma>;
- };
-
- lcdc_rgb_m0_hsync_pin: lcdc-rgb-m0-hsync-pin {
- rockchip,pins =
- <3 RK_PA1 1 &pcfg_pull_none_12ma>;
- };
-
- lcdc_rgb_m0_vsync_pin: lcdc-rgb-m0-vsync-pin {
- rockchip,pins =
- <3 RK_PA2 1 &pcfg_pull_none_12ma>;
- };
-
- lcdc_rgb_m0_den_pin: lcdc-rgb-m0-den-pin {
- rockchip,pins =
- <3 RK_PA3 1 &pcfg_pull_none_12ma>;
- };
-
- lcdc_rgb888_m0_data_pins: lcdc-rgb888-m0-data-pins {
- rockchip,pins =
- <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
- <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
- <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
- <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
- <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
- <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
- <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
- <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
- <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
- <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
- <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
- <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
- <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
- <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
- <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
- <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
- <3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
- <3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
- <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
- <3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
- <3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
- <3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
- <3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
- <3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
- };
-
- lcdc_rgb666_m0_data_pins: lcdc-rgb666-m0-data-pins {
- rockchip,pins =
- <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
- <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
- <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
- <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
- <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
- <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
- <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
- <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
- <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
- <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
- <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
- <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
- <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
- <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
- <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
- <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
- <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
- <3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
- };
-
- lcdc_rgb565_m0_data_pins: lcdc-rgb565-m0-data-pins {
- rockchip,pins =
- <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
- <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
- <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
- <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
- <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
- <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
- <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
- <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
- <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
- <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
- <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
- <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
- <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
- <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
- <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
- <3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
- };
-
- lcdc_rgb888_m1_data_pins: lcdc-rgb888-m1-data-pins {
- rockchip,pins =
- <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
- <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
- <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
- <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
- <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
- <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
- <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
- <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
- <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
- <3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
- <3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
- <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
- <3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
- <3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
- <3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
- <3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
- <3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
- };
-
- lcdc_rgb666_m1_data_pins: lcdc-rgb666-m1-data-pins {
- rockchip,pins =
- <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
- <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
- <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
- <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
- <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
- <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
- <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
- <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
- <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
- <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
- <3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
- };
-
- lcdc_rgb565_m1_data_pins: lcdc-rgb565-m1-data-pins {
- rockchip,pins =
- <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
- <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
- <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
- <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
- <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
- <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
- <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
- <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
- <3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
- };
- };
-
- pwm0 {
- pwm0_pin: pwm0-pin {
- rockchip,pins =
- <0 RK_PB7 1 &pcfg_pull_none>;
- };
- };
-
- pwm1 {
- pwm1_pin: pwm1-pin {
- rockchip,pins =
- <0 RK_PC0 1 &pcfg_pull_none>;
- };
- };
-
- pwm2 {
- pwm2_pin: pwm2-pin {
- rockchip,pins =
- <2 RK_PB5 1 &pcfg_pull_none>;
- };
- };
-
- pwm3 {
- pwm3_pin: pwm3-pin {
- rockchip,pins =
- <0 RK_PC1 1 &pcfg_pull_none>;
- };
- };
-
- pwm4 {
- pwm4_pin: pwm4-pin {
- rockchip,pins =
- <3 RK_PC2 3 &pcfg_pull_none>;
- };
- };
-
- pwm5 {
- pwm5_pin: pwm5-pin {
- rockchip,pins =
- <3 RK_PC3 3 &pcfg_pull_none>;
- };
- };
-
- pwm6 {
- pwm6_pin: pwm6-pin {
- rockchip,pins =
- <3 RK_PC4 3 &pcfg_pull_none>;
- };
- };
-
- pwm7 {
- pwm7_pin: pwm7-pin {
- rockchip,pins =
- <3 RK_PC5 3 &pcfg_pull_none>;
- };
- };
-
- gmac {
- rmii_pins: rmii-pins {
- rockchip,pins =
- <2 RK_PA0 2 &pcfg_pull_none_12ma>, /* mac_txen */
- <2 RK_PA1 2 &pcfg_pull_none_12ma>, /* mac_txd1 */
- <2 RK_PA2 2 &pcfg_pull_none_12ma>, /* mac_txd0 */
- <2 RK_PA3 2 &pcfg_pull_none>, /* mac_rxd0 */
- <2 RK_PA4 2 &pcfg_pull_none>, /* mac_rxd1 */
- <2 RK_PA5 2 &pcfg_pull_none>, /* mac_rxer */
- <2 RK_PA6 2 &pcfg_pull_none>, /* mac_rxdv */
- <2 RK_PA7 2 &pcfg_pull_none>, /* mac_mdio */
- <2 RK_PB1 2 &pcfg_pull_none>; /* mac_mdc */
- };
-
- mac_refclk_12ma: mac-refclk-12ma {
- rockchip,pins =
- <2 RK_PB2 2 &pcfg_pull_none_12ma>;
- };
-
- mac_refclk: mac-refclk {
- rockchip,pins =
- <2 RK_PB2 2 &pcfg_pull_none>;
- };
- };
-
- cif-m0 {
- cif_clkout_m0: cif-clkout-m0 {
- rockchip,pins =
- <2 RK_PB3 1 &pcfg_pull_none>;
- };
-
- dvp_d2d9_m0: dvp-d2d9-m0 {
- rockchip,pins =
- <2 RK_PA0 1 &pcfg_pull_none>, /* cif_data2 */
- <2 RK_PA1 1 &pcfg_pull_none>, /* cif_data3 */
- <2 RK_PA2 1 &pcfg_pull_none>, /* cif_data4 */
- <2 RK_PA3 1 &pcfg_pull_none>, /* cif_data5 */
- <2 RK_PA4 1 &pcfg_pull_none>, /* cif_data6 */
- <2 RK_PA5 1 &pcfg_pull_none>, /* cif_data7 */
- <2 RK_PA6 1 &pcfg_pull_none>, /* cif_data8 */
- <2 RK_PA7 1 &pcfg_pull_none>, /* cif_data9 */
- <2 RK_PB0 1 &pcfg_pull_none>, /* cif_sync */
- <2 RK_PB1 1 &pcfg_pull_none>, /* cif_href */
- <2 RK_PB2 1 &pcfg_pull_none>, /* cif_clkin */
- <2 RK_PB3 1 &pcfg_pull_none>; /* cif_clkout */
- };
-
- dvp_d0d1_m0: dvp-d0d1-m0 {
- rockchip,pins =
- <2 RK_PB4 1 &pcfg_pull_none>, /* cif_data0 */
- <2 RK_PB6 1 &pcfg_pull_none>; /* cif_data1 */
- };
-
- dvp_d10d11_m0:d10-d11-m0 {
- rockchip,pins =
- <2 RK_PB7 1 &pcfg_pull_none>, /* cif_data10 */
- <2 RK_PC0 1 &pcfg_pull_none>; /* cif_data11 */
- };
- };
-
- cif-m1 {
- cif_clkout_m1: cif-clkout-m1 {
- rockchip,pins =
- <3 RK_PD0 3 &pcfg_pull_none>;
- };
-
- dvp_d2d9_m1: dvp-d2d9-m1 {
- rockchip,pins =
- <3 RK_PA3 3 &pcfg_pull_none>, /* cif_data2 */
- <3 RK_PA5 3 &pcfg_pull_none>, /* cif_data3 */
- <3 RK_PA7 3 &pcfg_pull_none>, /* cif_data4 */
- <3 RK_PB0 3 &pcfg_pull_none>, /* cif_data5 */
- <3 RK_PB1 3 &pcfg_pull_none>, /* cif_data6 */
- <3 RK_PB4 3 &pcfg_pull_none>, /* cif_data7 */
- <3 RK_PB6 3 &pcfg_pull_none>, /* cif_data8 */
- <3 RK_PB7 3 &pcfg_pull_none>, /* cif_data9 */
- <3 RK_PD1 3 &pcfg_pull_none>, /* cif_sync */
- <3 RK_PD2 3 &pcfg_pull_none>, /* cif_href */
- <3 RK_PD3 3 &pcfg_pull_none>, /* cif_clkin */
- <3 RK_PD0 3 &pcfg_pull_none>; /* cif_clkout */
- };
-
- dvp_d0d1_m1: dvp-d0d1-m1 {
- rockchip,pins =
- <3 RK_PA1 3 &pcfg_pull_none>, /* cif_data0 */
- <3 RK_PA2 3 &pcfg_pull_none>; /* cif_data1 */
- };
-
- dvp_d10d11_m1:d10-d11-m1 {
- rockchip,pins =
- <3 RK_PC6 3 &pcfg_pull_none>, /* cif_data10 */
- <3 RK_PC7 3 &pcfg_pull_none>; /* cif_data11 */
- };
- };
-
- isp {
- isp_prelight: isp-prelight {
- rockchip,pins =
- <3 RK_PD1 4 &pcfg_pull_none>;
- };
- };
- };
-};
diff --git a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
index a6fb8b1..ff5bab3 100644
--- a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
+++ b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
@@ -4,17 +4,6 @@
*/
#include "rk3308-u-boot.dtsi"
-&emmc {
- cap-sd-highspeed;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus4>;
-};
-
-&emmc_bus4 {
- bootph-pre-ram;
- bootph-some-ram;
-};
-
&u2phy_otg {
/delete-property/ phy-supply;
};
@@ -24,14 +13,6 @@
clock-frequency = <24000000>;
};
-&uart0_cts {
- bootph-all;
-};
-
-&uart0_rts {
- bootph-all;
-};
-
&uart0_xfer {
bootph-all;
};
diff --git a/arch/arm/dts/rk3308-rock-s0-u-boot.dtsi b/arch/arm/dts/rk3308-rock-s0-u-boot.dtsi
new file mode 100644
index 0000000..84ca2ee
--- /dev/null
+++ b/arch/arm/dts/rk3308-rock-s0-u-boot.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "rk3308-u-boot.dtsi"
+
+&emmc_pwren {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&uart0 {
+ bootph-all;
+ clock-frequency = <24000000>;
+};
+
+&uart0_xfer {
+ bootph-all;
+};
+
+&vdd_core {
+ regulator-init-microvolt = <1015000>;
+};
diff --git a/arch/arm/dts/rk3308-u-boot.dtsi b/arch/arm/dts/rk3308-u-boot.dtsi
index 684fa7a..b7964e2 100644
--- a/arch/arm/dts/rk3308-u-boot.dtsi
+++ b/arch/arm/dts/rk3308-u-boot.dtsi
@@ -21,22 +21,6 @@
bootph-all;
};
- otp: nvmem@ff210000 {
- compatible = "rockchip,rk3308-otp";
- reg = <0x0 0xff210000 0x0 0x4000>;
- clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>,
- <&cru PCLK_OTP_PHY>;
- clock-names = "otp", "apb_pclk", "phy";
- resets = <&cru SRST_OTP_PHY>;
- reset-names = "phy";
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpu_id: id@7 {
- reg = <0x07 0x10>;
- };
- };
-
rng: rng@ff2f0000 {
compatible = "rockchip,cryptov2-rng";
reg = <0x0 0xff2f0000 0x0 0x4000>;
diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
index a31dea8..a0ab8b6 100644
--- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
+++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
@@ -48,18 +48,22 @@
&gpio0 {
bootph-all;
+ gpio-ranges = <&pinctrl 0 0 32>;
};
&gpio1 {
bootph-all;
+ gpio-ranges = <&pinctrl 0 32 32>;
};
&gpio2 {
bootph-all;
+ gpio-ranges = <&pinctrl 0 64 32>;
};
&gpio3 {
bootph-all;
+ gpio-ranges = <&pinctrl 0 96 32>;
};
&grf {
diff --git a/arch/arm/dts/rk3326.dtsi b/arch/arm/dts/rk3326.dtsi
deleted file mode 100644
index 2ba6da1..0000000
--- a/arch/arm/dts/rk3326.dtsi
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
- */
-
-#include "px30.dtsi"
-
-&display_subsystem {
- ports = <&vopb_out>;
-};
-
-/delete-node/ &dsi_in_vopl;
-/delete-node/ &lvds_vopl_in;
-/delete-node/ &vopl;
-/delete-node/ &vopl_mmu;
diff --git a/arch/arm/dts/rk3566-orangepi-3b-u-boot.dtsi b/arch/arm/dts/rk3566-orangepi-3b-u-boot.dtsi
new file mode 100644
index 0000000..e44b699
--- /dev/null
+++ b/arch/arm/dts/rk3566-orangepi-3b-u-boot.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "rk356x-u-boot.dtsi"
+
+&gpio4 {
+ bootph-pre-ram;
+};
+
+&sfc {
+ flash@0 {
+ bootph-pre-ram;
+ bootph-some-ram;
+ };
+};
diff --git a/arch/arm/dts/rk3566-orangepi-3b-v1.1-u-boot.dtsi b/arch/arm/dts/rk3566-orangepi-3b-v1.1-u-boot.dtsi
new file mode 100644
index 0000000..50ea6ed
--- /dev/null
+++ b/arch/arm/dts/rk3566-orangepi-3b-v1.1-u-boot.dtsi
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "rk3566-orangepi-3b-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3566-orangepi-3b-v1.1.dts b/arch/arm/dts/rk3566-orangepi-3b-v1.1.dts
new file mode 100644
index 0000000..f97e33b
--- /dev/null
+++ b/arch/arm/dts/rk3566-orangepi-3b-v1.1.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <arm64/rockchip/rk3566-orangepi-3b-v1.1.dts>
diff --git a/arch/arm/dts/rk3566-orangepi-3b-v2.1-u-boot.dtsi b/arch/arm/dts/rk3566-orangepi-3b-v2.1-u-boot.dtsi
new file mode 100644
index 0000000..50ea6ed
--- /dev/null
+++ b/arch/arm/dts/rk3566-orangepi-3b-v2.1-u-boot.dtsi
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "rk3566-orangepi-3b-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3566-orangepi-3b-v2.1.dts b/arch/arm/dts/rk3566-orangepi-3b-v2.1.dts
new file mode 100644
index 0000000..0031e24
--- /dev/null
+++ b/arch/arm/dts/rk3566-orangepi-3b-v2.1.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <arm64/rockchip/rk3566-orangepi-3b-v2.1.dts>
diff --git a/arch/arm/dts/rk3566-orangepi-3b.dts b/arch/arm/dts/rk3566-orangepi-3b.dts
new file mode 100644
index 0000000..44b9a9c
--- /dev/null
+++ b/arch/arm/dts/rk3566-orangepi-3b.dts
@@ -0,0 +1,5 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <arm64/rockchip/rk3566-orangepi-3b.dtsi>
diff --git a/arch/arm/dts/rk3566-pinetab2-v0.1.dts b/arch/arm/dts/rk3566-pinetab2-v0.1.dts
deleted file mode 100644
index 5fe6ca5..0000000
--- a/arch/arm/dts/rk3566-pinetab2-v0.1.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include "rk3566-pinetab2.dtsi"
-
-/ {
- model = "Pine64 PineTab2 v0.1";
- compatible = "pine64,pinetab2-v0.1", "pine64,pinetab2", "rockchip,rk3566";
-};
-
-&lcd {
- reset-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>;
-};
-
-&pinctrl {
- lcd0 {
- lcd0_rst_l: lcd0-rst-l {
- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&sdmmc1 {
- vmmc-supply = <&vcc3v3_sys>;
-};
diff --git a/arch/arm/dts/rk3566-pinetab2-v2.0.dts b/arch/arm/dts/rk3566-pinetab2-v2.0.dts
deleted file mode 100644
index 9349541..0000000
--- a/arch/arm/dts/rk3566-pinetab2-v2.0.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include "rk3566-pinetab2.dtsi"
-
-/ {
- model = "Pine64 PineTab2 v2.0";
- compatible = "pine64,pinetab2-v2.0", "pine64,pinetab2", "rockchip,rk3566";
-};
-
-&gpio_keys {
- pinctrl-0 = <&kb_id_det>, <&hall_int_l>;
-
- event-hall-sensor {
- debounce-interval = <20>;
- gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
- label = "Hall Sensor";
- linux,code = <SW_LID>;
- linux,input-type = <EV_SW>;
- wakeup-event-action = <EV_ACT_DEASSERTED>;
- wakeup-source;
- };
-};
-
-&lcd {
- reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_pwren_h &lcd0_rst_l>;
-};
-
-&pinctrl {
- lcd0 {
- lcd0_rst_l: lcd0-rst-l {
- rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- hall {
- hall_int_l: hall-int-l {
- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&sdmmc1 {
- vmmc-supply = <&vcc_sys>;
-};
diff --git a/arch/arm/dts/rk3566-pinetab2.dtsi b/arch/arm/dts/rk3566-pinetab2.dtsi
deleted file mode 100644
index db40281..0000000
--- a/arch/arm/dts/rk3566-pinetab2.dtsi
+++ /dev/null
@@ -1,943 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/soc/rockchip,vop2.h>
-#include <dt-bindings/usb/pd.h>
-#include "rk3566.dtsi"
-
-/ {
- chassis-type = "tablet";
-
- aliases {
- mmc0 = &sdhci;
- mmc1 = &sdmmc0;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 0>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
- poll-interval = <25>;
-
- button-vol-up {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- press-threshold-microvolt = <297500>;
- };
-
- button-vol-down {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- press-threshold-microvolt = <1750>;
- };
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm4 0 25000 0>;
- brightness-levels = <20 220>;
- num-interpolated-steps = <200>;
- default-brightness-level = <100>;
- power-supply = <&vcc_sys>;
- };
-
- battery: battery {
- compatible = "simple-battery";
- charge-full-design-microamp-hours = <6000000>;
- charge-term-current-microamp = <300000>;
- constant-charge-current-max-microamp = <2000000>;
- constant-charge-voltage-max-microvolt = <4300000>;
- voltage-max-design-microvolt = <4350000>;
- voltage-min-design-microvolt = <3400000>;
-
- ocv-capacity-celsius = <20>;
- ocv-capacity-table-0 = <4322000 100>, <4250000 95>, <4192000 90>, <4136000 85>,
- <4080000 80>, <4022000 75>, <3972000 70>, <3928000 65>,
- <3885000 60>, <3833000 55>, <3798000 50>, <3780000 45>,
- <3776000 40>, <3773000 35>, <3755000 30>, <3706000 25>,
- <3640000 20>, <3589000 15>, <3535000 10>, <3492000 5>,
- <3400000 0>;
- };
-
- gpio_keys: gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&kb_id_det>;
-
- tablet-mode-switch {
- debounce-interval = <20>;
- gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
- label = "Tablet Mode";
- linux,input-type = <EV_SW>;
- linux,code = <SW_TABLET_MODE>;
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "d";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-
- led-0 {
- compatible = "regulator-led";
- vled-supply = <&vcc5v0_flashled>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_FLASH;
- };
-
- rk817-sound {
- compatible = "simple-audio-card";
- pinctrl-names = "default";
- pinctrl-0 = <&hp_det_l>;
- simple-audio-card,format = "i2s";
- simple-audio-card,name = "rk817_ext";
- simple-audio-card,mclk-fs = <256>;
-
- simple-audio-card,widgets =
- "Microphone", "Mic Jack",
- "Headphone", "Headphones",
- "Speaker", "Internal Speakers";
-
- simple-audio-card,routing =
- "MICR", "Mic Jack",
- "Headphones", "HPOL",
- "Headphones", "HPOR",
- "Internal Speakers", "Speaker Amplifier OUTL",
- "Internal Speakers", "Speaker Amplifier OUTR",
- "Speaker Amplifier INL", "HPOL",
- "Speaker Amplifier INR", "HPOR";
- simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
- simple-audio-card,aux-devs = <&speaker_amp>;
- simple-audio-card,pin-switches = "Internal Speakers";
-
- simple-audio-card,cpu {
- sound-dai = <&i2s1_8ch>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&rk817>;
- };
- };
-
- speaker_amp: speaker-amplifier {
- compatible = "simple-audio-amplifier";
- pinctrl-names = "default";
- pinctrl-0 = <&spk_ctl>;
- enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
- sound-name-prefix = "Speaker Amplifier";
- VCC-supply = <&vcc_bat>;
- };
-
- vcc_3v3: vcc-3v3-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- vcc3v3_minipcie: vcc3v3-minipcie-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pwren_h>;
- regulator-name = "vcc3v3_minipcie";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_sys>;
- };
-
- vcc3v3_sd: vcc3v3-sd-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_pwren_l>;
- regulator-name = "vcc3v3_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- vcc5v0_flashled: vcc5v0-flashled-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&flash_led_en_h>;
- regulator-name = "vcc5v0_flashled";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v_midu>;
- };
-
- vcc5v0_usb_host0: vcc5v0-usb-host0-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb_host_pwren1_h>;
- regulator-name = "vcc5v0_usb_host0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v_midu>;
- };
-
- vcc5v0_usb_host2: vcc5v0-usb-host2-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb_host_pwren2_h>;
- regulator-name = "vcc5v0_usb_host2";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v_midu>;
- };
-
- vcc_bat: vcc-bat-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_bat";
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_sys: vcc-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_bat>;
- };
-
- vdd1v2_dvp: vdd1v2-dvp-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vdd1v2_dvp";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- vin-supply = <&vcc_3v3>;
- };
-};
-
-&combphy1 {
- status = "okay";
-};
-
-&combphy2 {
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&cpu1 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&cpu2 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&cpu3 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&cru {
- assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
- <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
- assigned-clock-rates = <32768>, <1200000000>, <200000000>, <500000000>;
- assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>;
-};
-
-&csi_dphy {
- status = "okay";
-};
-
-&dsi0 {
- status = "okay";
- clock-master;
- #address-cells = <1>;
- #size-cells = <0>;
-
- lcd: panel@0 {
- compatible = "boe,th101mb31ig002-28a";
- reg = <0>;
- backlight = <&backlight>;
- enable-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
- rotation = <90>;
- power-supply = <&vcc_3v3>;
-
- port@0 {
- panel_in_dsi: endpoint@0 {
- remote-endpoint = <&dsi0_out_con>;
- };
- };
- };
-};
-
-&dsi0_in {
- dsi0_in_vp1: endpoint {
- remote-endpoint = <&vp1_out_dsi0>;
- };
-};
-
-&dsi0_out {
- dsi0_out_con: endpoint {
- remote-endpoint = <&panel_in_dsi>;
- };
-};
-
-&dsi_dphy0 {
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu_npu>;
- status = "okay";
-};
-
-&hdmi {
- avdd-0v9-supply = <&vdda_0v9_p>;
- avdd-1v8-supply = <&vcc_1v8>;
- status = "okay";
-};
-
-&hdmi_in {
- hdmi_in_vp0: endpoint {
- remote-endpoint = <&vp0_out_hdmi>;
- };
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- vdd_cpu: regulator@1c {
- compatible = "tcs,tcs4525";
- reg = <0x1c>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1150000>;
- regulator-ramp-delay = <2300>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- rk817: pmic@20 {
- compatible = "rockchip,rk817";
- reg = <0x20>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
- assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
- assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
- clock-names = "mclk";
- clocks = <&cru I2S1_MCLKOUT_TX>;
- clock-output-names = "rk808-clkout1", "rk808-clkout2";
- #clock-cells = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
- rockchip,system-power-controller;
- #sound-dai-cells = <0>;
- wakeup-source;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc5-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc_sys>;
- vcc9-supply = <&vcc5v_midu>;
-
- regulators {
- vdd_logic: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-initial-mode = <0x2>;
- regulator-name = "vdd_logic";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu_npu: DCDC_REG2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-initial-mode = <0x2>;
- regulator-name = "vdd_gpu_npu";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-initial-mode = <0x2>;
- regulator-name = "vcc_ddr";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc3v3_sys: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-initial-mode = <0x2>;
- regulator-name = "vcc3v3_sys";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca1v8_pmu: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcca1v8_pmu";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vdda_0v9_p: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-name = "vdda_0v9_p";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdda0v9_pmu: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-name = "vdda0v9_pmu";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vccio_acodec: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_acodec";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_sd";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_pmu: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc3v3_pmu";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_1v8";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_dvp: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8_dvp";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc2v8_dvp: LDO_REG9 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-name = "vcc2v8_dvp";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc5v_midu: BOOST {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-name = "boost";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vbus: OTG_SWITCH {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-name = "otg_switch";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
-
- charger {
- monitored-battery = <&battery>;
- rockchip,resistor-sense-micro-ohms = <10000>;
- rockchip,sleep-enter-current-microamp = <300000>;
- rockchip,sleep-filter-current-microamp = <100000>;
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <400000>;
- status = "okay";
-
- touchscreen@5d {
- compatible = "goodix,gt911";
- reg = <0x5d>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PB0 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&tp_int_l_pmuio2>, <&tp_rst_l_pmuio2>;
- AVDD28-supply = <&vcc3v3_pmu>;
- VDDIO-supply = <&vcca1v8_pmu>;
- irq-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&i2c2 {
- clock-frequency = <400000>;
- pinctrl-0 = <&i2c2m1_xfer>;
- status = "okay";
-
- vcm@c {
- compatible = "dongwoon,dw9714";
- reg = <0x0c>;
- vcc-supply = <&vcc1v8_dvp>;
- };
-
- camera@36 {
- compatible = "ovti,ov5648";
- reg = <0x36>;
- pinctrl-names = "default";
- pinctrl-0 = <&camerab_pdn_l &camerab_rst_l>;
-
- clocks = <&cru CLK_CIF_OUT>;
- assigned-clocks = <&cru CLK_CIF_OUT>;
- assigned-clock-rates = <24000000>;
-
- avdd-supply = <&vcc2v8_dvp>;
- dvdd-supply = <&vdd1v2_dvp>;
- dovdd-supply = <&vcc1v8_dvp>;
- powerdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
- reset-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>;
-
- port {
- endpoint {
- data-lanes = <1 2>;
- remote-endpoint = <0>;
- link-frequencies = /bits/ 64 <210000000 168000000>;
- };
- };
- };
-};
-
-&i2c5 {
- clock-frequency = <400000>;
- status = "okay";
-
- accelerometer@18 {
- compatible = "silan,sc7a20";
- reg = <0x18>;
- interrupt-parent = <&gpio3>;
- interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&gsensor_int_l>;
- st,drdy-int-pin = <1>;
- vdd-supply = <&vcc_1v8>;
- vddio-supply = <&vcc_1v8>;
- mount-matrix = "1", "0", "0",
- "0", "0", "1",
- "0", "1", "0";
- };
-};
-
-&i2s0_8ch {
- status = "okay";
-};
-
-&i2s1_8ch {
- pinctrl-names = "default";
- pinctrl-0 = <&i2s1m0_sclktx
- &i2s1m0_lrcktx
- &i2s1m0_sdi0
- &i2s1m0_sdo0>;
- rockchip,trcm-sync-tx-only;
- status = "okay";
-};
-
-&pcie2x1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_reset_h>;
- reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
- vpcie3v3-supply = <&vcc3v3_minipcie>;
- status = "okay";
-};
-
-&pinctrl {
- camerab {
- camerab_pdn_l: camerab-pdn-l {
- rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- camerab_rst_l: camerab-rst-l {
- rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- cameraf {
- cameraf_pdn_l: cameraf-pdn-l {
- rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- cameraf_rst_l: cameraf-rst-l {
- rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- flash {
- flash_led_en_h: flash-led-en-h {
- rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- fspi {
- fspi_dual_io_pins: fspi-dual-io-pins {
- rockchip,pins =
- /* fspi_clk */
- <1 RK_PD0 1 &pcfg_pull_none>,
- /* fspi_cs0n */
- <1 RK_PD3 1 &pcfg_pull_none>,
- /* fspi_d0 */
- <1 RK_PD1 1 &pcfg_pull_none>,
- /* fspi_d1 */
- <1 RK_PD2 1 &pcfg_pull_none>;
- };
- };
-
- gsensor {
- gsensor_int_l: gsensor-int-l {
- rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- kb {
- kb_id_det: kb-id-det {
- rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- lcd {
- lcd_pwren_h: lcd-pwren-h {
- rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pcie {
- pcie_pwren_h: pcie-pwren-h {
- rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie_reset_h: pcie-reset-h {
- rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- sdmmc {
- sdmmc_pwren_l: sdmmc-pwren-l {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sound {
- hp_det_l: hp-det-l {
- rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- spk_ctl: spk-ctl {
- rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- tp {
- tp_int_l_pmuio2: tp-int-l-pmuio2 {
- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- tp_rst_l_pmuio2: tp-rst-l-pmuio2 {
- rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb {
- usbcc_int_l: usbcc-int-l {
- rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- usb_host_pwren1_h: usb-host-pwren1-h {
- rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- usb_host_pwren2_h: usb-host-pwren2-h {
- rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wifi {
- host_wake_wl: host-wake-wl {
- rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- wifi_wake_host_h: wifi-wake-host-h {
- rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-};
-
-&pmu_io_domains {
- pmuio1-supply = <&vcc3v3_pmu>;
- pmuio2-supply = <&vcca1v8_pmu>;
- vccio1-supply = <&vccio_acodec>;
- vccio2-supply = <&vcc_1v8>;
- vccio3-supply = <&vccio_sd>;
- vccio4-supply = <&vcc_1v8>;
- vccio5-supply = <&vcc_1v8>;
- vccio6-supply = <&vcc1v8_dvp>;
- vccio7-supply = <&vcc_3v3>;
- status = "okay";
-};
-
-&pwm4 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc_1v8>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- no-sdio;
- no-sd;
- non-removable;
- max-frequency = <200000000>;
- mmc-hs200-1_8v;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_bus8
- &emmc_clk
- &emmc_cmd
- &emmc_datastrobe
- &emmc_rstnout>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vcc_1v8>;
- status = "okay";
-};
-
-&sdmmc0 {
- bus-width = <4>;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
- disable-wp;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0_bus4
- &sdmmc0_clk
- &sdmmc0_cmd
- &sdmmc0_det>;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc3v3_sd>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&sdmmc1 {
- bus-width = <4>;
- cap-sd-highspeed;
- cap-sdio-irq;
- keep-power-in-suspend;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc1_bus4
- &sdmmc1_cmd
- &sdmmc1_clk>;
- sd-uhs-sdr104;
- vqmmc-supply = <&vcca1v8_pmu>;
- status = "okay";
-};
-
-&sfc {
- pinctrl-names = "default";
- pinctrl-0 = <&fspi_dual_io_pins>;
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <100000000>;
- spi-rx-bus-width = <2>;
- spi-tx-bus-width = <1>;
- };
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <0>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host0_xhci {
- status = "okay";
-};
-
-&usb_host1_xhci {
- status = "okay";
-};
-
-&usb2phy0 {
- status = "okay";
-};
-
-&usb2phy0_host {
- phy-supply = <&vcc5v0_usb_host0>;
- status = "okay";
-};
-
-&usb2phy0_otg {
- status = "okay";
-};
-
-&usb2phy1 {
- status = "okay";
-};
-
-&usb2phy1_otg {
- phy-supply = <&vcc5v0_usb_host2>;
- status = "okay";
-};
-
-&vop {
- assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
- assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
- status = "okay";
-};
-
-&vop_mmu {
- status = "okay";
-};
-
-&vp0 {
- vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
- reg = <ROCKCHIP_VOP2_EP_HDMI0>;
- remote-endpoint = <&hdmi_in_vp0>;
- };
-};
-
-&vp1 {
- vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
- reg = <ROCKCHIP_VOP2_EP_MIPI0>;
- remote-endpoint = <&dsi0_in_vp1>;
- };
-};
diff --git a/arch/arm/dts/rk3566-radxa-zero-3e-u-boot.dtsi b/arch/arm/dts/rk3566-radxa-zero-3e-u-boot.dtsi
new file mode 100644
index 0000000..8af2581
--- /dev/null
+++ b/arch/arm/dts/rk3566-radxa-zero-3e-u-boot.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk356x-u-boot.dtsi"
+
+&saradc {
+ bootph-pre-ram;
+};
+
+&usb_host0_xhci {
+ dr_mode = "otg";
+};
+
+&vcca_1v8 {
+ bootph-pre-ram;
+};
diff --git a/arch/arm/dts/rk3566-radxa-zero-3w-u-boot.dtsi b/arch/arm/dts/rk3566-radxa-zero-3w-u-boot.dtsi
new file mode 100644
index 0000000..8af2581
--- /dev/null
+++ b/arch/arm/dts/rk3566-radxa-zero-3w-u-boot.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk356x-u-boot.dtsi"
+
+&saradc {
+ bootph-pre-ram;
+};
+
+&usb_host0_xhci {
+ dr_mode = "otg";
+};
+
+&vcca_1v8 {
+ bootph-pre-ram;
+};
diff --git a/arch/arm/dts/rk3566-rock-3c-u-boot.dtsi b/arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
new file mode 100644
index 0000000..f4124aa
--- /dev/null
+++ b/arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk356x-u-boot.dtsi"
+
+&sfc {
+ flash@0 {
+ bootph-pre-ram;
+ bootph-some-ram;
+ };
+};
+
+/ {
+ leds {
+ led-0 {
+ default-state = "on";
+ };
+ };
+};
diff --git a/arch/arm/dts/rk3568-evb-u-boot.dtsi b/arch/arm/dts/rk3568-evb1-v10-u-boot.dtsi
similarity index 100%
rename from arch/arm/dts/rk3568-evb-u-boot.dtsi
rename to arch/arm/dts/rk3568-evb1-v10-u-boot.dtsi
diff --git a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
index 9d18f5d..0da3d9c 100644
--- a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
@@ -26,17 +26,12 @@
};
&sfc {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
bootph-pre-ram;
bootph-some-ram;
- spi-max-frequency = <24000000>;
- spi-rx-bus-width = <4>;
- spi-tx-bus-width = <1>;
};
};
+
+&usb_host0_ohci {
+ status = "disabled";
+};
diff --git a/arch/arm/dts/rk3568-rock-3b-u-boot.dtsi b/arch/arm/dts/rk3568-rock-3b-u-boot.dtsi
new file mode 100644
index 0000000..b1f3242
--- /dev/null
+++ b/arch/arm/dts/rk3568-rock-3b-u-boot.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk356x-u-boot.dtsi"
+
+&sdhci {
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+};
+
+&sfc {
+ flash@0 {
+ bootph-pre-ram;
+ bootph-some-ram;
+ };
+};
diff --git a/arch/arm/dts/rk3588-friendlyelec-cm3588-nas-u-boot.dtsi b/arch/arm/dts/rk3588-friendlyelec-cm3588-nas-u-boot.dtsi
new file mode 100644
index 0000000..2e60f2d
--- /dev/null
+++ b/arch/arm/dts/rk3588-friendlyelec-cm3588-nas-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk3588-u-boot.dtsi"
+
+&sdhci {
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+};
diff --git a/arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi b/arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi
new file mode 100644
index 0000000..1e5c267
--- /dev/null
+++ b/arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Collabora Ltd.
+ */
+
+#include "rk3588-u-boot.dtsi"
+
+&fspim2_pins {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&sfc {
+ flash@0 {
+ bootph-pre-ram;
+ bootph-some-ram;
+ };
+};
+
+&vcc3v3_mkey {
+ regulator-always-on;
+};
diff --git a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
index 8e318e6..4dd17ff 100644
--- a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
+++ b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
@@ -39,18 +39,6 @@
status = "okay";
};
-&u2phy1 {
- status = "okay";
-};
-
-&u2phy1_otg {
- status = "okay";
-};
-
-&usbdp_phy1 {
- status = "okay";
-};
-
&usbdp_phy0 {
status = "okay";
};
@@ -60,8 +48,3 @@
maximum-speed = "high-speed";
status = "okay";
};
-
-&usb_host1_xhci {
- dr_mode = "host";
- status = "okay";
-};
diff --git a/arch/arm/dts/rockchip-pinconf.dtsi b/arch/arm/dts/rockchip-pinconf.dtsi
deleted file mode 100644
index 5c64543..0000000
--- a/arch/arm/dts/rockchip-pinconf.dtsi
+++ /dev/null
@@ -1,344 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
- */
-
-&pinctrl {
- /omit-if-no-ref/
- pcfg_pull_up: pcfg-pull-up {
- bias-pull-up;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down: pcfg-pull-down {
- bias-pull-down;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none: pcfg-pull-none {
- bias-disable;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_0: pcfg-pull-none-drv-level-0 {
- bias-disable;
- drive-strength = <0>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_1: pcfg-pull-none-drv-level-1 {
- bias-disable;
- drive-strength = <1>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_2: pcfg-pull-none-drv-level-2 {
- bias-disable;
- drive-strength = <2>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_3: pcfg-pull-none-drv-level-3 {
- bias-disable;
- drive-strength = <3>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_4: pcfg-pull-none-drv-level-4 {
- bias-disable;
- drive-strength = <4>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_5: pcfg-pull-none-drv-level-5 {
- bias-disable;
- drive-strength = <5>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_6: pcfg-pull-none-drv-level-6 {
- bias-disable;
- drive-strength = <6>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_7: pcfg-pull-none-drv-level-7 {
- bias-disable;
- drive-strength = <7>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_8: pcfg-pull-none-drv-level-8 {
- bias-disable;
- drive-strength = <8>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_9: pcfg-pull-none-drv-level-9 {
- bias-disable;
- drive-strength = <9>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_10: pcfg-pull-none-drv-level-10 {
- bias-disable;
- drive-strength = <10>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_11: pcfg-pull-none-drv-level-11 {
- bias-disable;
- drive-strength = <11>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_12: pcfg-pull-none-drv-level-12 {
- bias-disable;
- drive-strength = <12>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_13: pcfg-pull-none-drv-level-13 {
- bias-disable;
- drive-strength = <13>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_14: pcfg-pull-none-drv-level-14 {
- bias-disable;
- drive-strength = <14>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_15: pcfg-pull-none-drv-level-15 {
- bias-disable;
- drive-strength = <15>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_0: pcfg-pull-up-drv-level-0 {
- bias-pull-up;
- drive-strength = <0>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_1: pcfg-pull-up-drv-level-1 {
- bias-pull-up;
- drive-strength = <1>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_2: pcfg-pull-up-drv-level-2 {
- bias-pull-up;
- drive-strength = <2>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_3: pcfg-pull-up-drv-level-3 {
- bias-pull-up;
- drive-strength = <3>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_4: pcfg-pull-up-drv-level-4 {
- bias-pull-up;
- drive-strength = <4>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_5: pcfg-pull-up-drv-level-5 {
- bias-pull-up;
- drive-strength = <5>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_6: pcfg-pull-up-drv-level-6 {
- bias-pull-up;
- drive-strength = <6>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_7: pcfg-pull-up-drv-level-7 {
- bias-pull-up;
- drive-strength = <7>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_8: pcfg-pull-up-drv-level-8 {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_9: pcfg-pull-up-drv-level-9 {
- bias-pull-up;
- drive-strength = <9>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_10: pcfg-pull-up-drv-level-10 {
- bias-pull-up;
- drive-strength = <10>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_11: pcfg-pull-up-drv-level-11 {
- bias-pull-up;
- drive-strength = <11>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_12: pcfg-pull-up-drv-level-12 {
- bias-pull-up;
- drive-strength = <12>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_13: pcfg-pull-up-drv-level-13 {
- bias-pull-up;
- drive-strength = <13>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_14: pcfg-pull-up-drv-level-14 {
- bias-pull-up;
- drive-strength = <14>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_drv_level_15: pcfg-pull-up-drv-level-15 {
- bias-pull-up;
- drive-strength = <15>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_0: pcfg-pull-down-drv-level-0 {
- bias-pull-down;
- drive-strength = <0>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_1: pcfg-pull-down-drv-level-1 {
- bias-pull-down;
- drive-strength = <1>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_2: pcfg-pull-down-drv-level-2 {
- bias-pull-down;
- drive-strength = <2>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_3: pcfg-pull-down-drv-level-3 {
- bias-pull-down;
- drive-strength = <3>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_4: pcfg-pull-down-drv-level-4 {
- bias-pull-down;
- drive-strength = <4>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_5: pcfg-pull-down-drv-level-5 {
- bias-pull-down;
- drive-strength = <5>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_6: pcfg-pull-down-drv-level-6 {
- bias-pull-down;
- drive-strength = <6>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_7: pcfg-pull-down-drv-level-7 {
- bias-pull-down;
- drive-strength = <7>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_8: pcfg-pull-down-drv-level-8 {
- bias-pull-down;
- drive-strength = <8>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_9: pcfg-pull-down-drv-level-9 {
- bias-pull-down;
- drive-strength = <9>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_10: pcfg-pull-down-drv-level-10 {
- bias-pull-down;
- drive-strength = <10>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_11: pcfg-pull-down-drv-level-11 {
- bias-pull-down;
- drive-strength = <11>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_12: pcfg-pull-down-drv-level-12 {
- bias-pull-down;
- drive-strength = <12>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_13: pcfg-pull-down-drv-level-13 {
- bias-pull-down;
- drive-strength = <13>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_14: pcfg-pull-down-drv-level-14 {
- bias-pull-down;
- drive-strength = <14>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_drv_level_15: pcfg-pull-down-drv-level-15 {
- bias-pull-down;
- drive-strength = <15>;
- };
-
- /omit-if-no-ref/
- pcfg_pull_up_smt: pcfg-pull-up-smt {
- bias-pull-up;
- input-schmitt-enable;
- };
-
- /omit-if-no-ref/
- pcfg_pull_down_smt: pcfg-pull-down-smt {
- bias-pull-down;
- input-schmitt-enable;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_smt: pcfg-pull-none-smt {
- bias-disable;
- input-schmitt-enable;
- };
-
- /omit-if-no-ref/
- pcfg_pull_none_drv_level_0_smt: pcfg-pull-none-drv-level-0-smt {
- bias-disable;
- drive-strength = <0>;
- input-schmitt-enable;
- };
-
- /omit-if-no-ref/
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- /omit-if-no-ref/
- pcfg_output_low: pcfg-output-low {
- output-low;
- };
-};
diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
index bf66b64..92bc4e7 100644
--- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
@@ -53,7 +53,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
index ffc3b4c..69dfe3b 100644
--- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
@@ -41,7 +41,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts
index 22d3502..7521766 100644
--- a/arch/arm/dts/sun50i-a64-olinuxino.dts
+++ b/arch/arm/dts/sun50i-a64-olinuxino.dts
@@ -52,7 +52,7 @@
status = "okay";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts
index 714a270..a037e15 100644
--- a/arch/arm/dts/sun50i-a64-orangepi-win.dts
+++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts
@@ -68,7 +68,7 @@
status = "okay";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts
index 576eae1..1a85d5f 100644
--- a/arch/arm/dts/sun50i-a64-pinebook.dts
+++ b/arch/arm/dts/sun50i-a64-pinebook.dts
@@ -79,7 +79,7 @@
enable-active-high;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
diff --git a/arch/arm/dts/sun50i-a64-pinephone.dtsi b/arch/arm/dts/sun50i-a64-pinephone.dtsi
index b25e791..c62dc93 100644
--- a/arch/arm/dts/sun50i-a64-pinephone.dtsi
+++ b/arch/arm/dts/sun50i-a64-pinephone.dtsi
@@ -39,25 +39,35 @@
leds {
compatible = "gpio-leds";
- led-0 {
+ led0: led-0 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+ retain-state-suspended;
};
- led-1 {
+ led1: led-1 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+ retain-state-suspended;
};
- led-2 {
+ led2: led-2 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+ retain-state-suspended;
};
};
+ multi-led {
+ compatible = "leds-group-multicolor";
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_INDICATOR;
+ leds = <&led0>, <&led1>, <&led2>;
+ };
+
reg_ps: ps-regulator {
compatible = "regulator-fixed";
regulator-name = "ps";
diff --git a/arch/arm/dts/sun50i-a64-pinetab.dts b/arch/arm/dts/sun50i-a64-pinetab.dts
index 0b2258ef..b6f4235 100644
--- a/arch/arm/dts/sun50i-a64-pinetab.dts
+++ b/arch/arm/dts/sun50i-a64-pinetab.dts
@@ -98,7 +98,7 @@
enable-active-high;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
post-power-on-delay-ms = <200>;
diff --git a/arch/arm/dts/sun50i-a64-teres-i.dts b/arch/arm/dts/sun50i-a64-teres-i.dts
index 945afdb..065b186 100644
--- a/arch/arm/dts/sun50i-a64-teres-i.dts
+++ b/arch/arm/dts/sun50i-a64-teres-i.dts
@@ -74,7 +74,7 @@
status = "okay";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
index 2240eae..b6928cc 100644
--- a/arch/arm/dts/sun50i-a64.dtsi
+++ b/arch/arm/dts/sun50i-a64.dtsi
@@ -107,27 +107,19 @@
gpu_opp_table: opp-table-gpu {
compatible = "operating-points-v2";
- opp-120000000 {
- opp-hz = /bits/ 64 <120000000>;
- };
-
- opp-312000000 {
- opp-hz = /bits/ 64 <312000000>;
- };
-
opp-432000000 {
opp-hz = /bits/ 64 <432000000>;
};
};
- osc24M: osc24M_clk {
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
- osc32k: osc32k_clk {
+ osc32k: osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
@@ -216,21 +208,21 @@
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_alert1: cpu_alert1 {
+ cpu_alert1: cpu-alert1 {
/* milliCelsius */
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
- cpu_crit: cpu_crit {
+ cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <110000>;
hysteresis = <2000>;
diff --git a/arch/arm/dts/sun50i-h313-tanix-tx1.dts b/arch/arm/dts/sun50i-h313-tanix-tx1.dts
new file mode 100644
index 0000000..bb2cde5
--- /dev/null
+++ b/arch/arm/dts/sun50i-h313-tanix-tx1.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Tanix TX1";
+ compatible = "oranth,tanix-tx1", "allwinner,sun50i-h616";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &sdio_wifi;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key {
+ label = "hidden";
+ linux,code = <BTN_0>;
+ gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ default-state = "on";
+ };
+ };
+
+ wifi_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
+ clock-names = "ext_clock";
+ pinctrl-0 = <&x32clk_fanout_pin>;
+ pinctrl-names = "default";
+ reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC input */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ir {
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_dldo1>;
+ vqmmc-supply = <®_aldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ sdio_wifi: wifi@1 {
+ reg = <1>;
+ };
+};
+
+&mmc2 {
+ vmmc-supply = <®_dldo1>;
+ vqmmc-supply = <®_aldo1>;
+ bus-width = <8>;
+ non-removable;
+ max-frequency = <100000000>;
+ cap-mmc-hw-reset;
+ mmc-ddr-1_8v;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pc-supply = <®_aldo1>;
+ vcc-pf-supply = <®_dldo1>;
+ vcc-pg-supply = <®_aldo1>;
+ vcc-ph-supply = <®_dldo1>;
+ vcc-pi-supply = <®_dldo1>;
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp313: pmic@36 {
+ compatible = "x-powers,axp313a";
+ reg = <0x36>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+
+ vin1-supply = <®_vcc5v>;
+ vin2-supply = <®_vcc5v>;
+ vin3-supply = <®_vcc5v>;
+
+ regulators {
+ /* Supplies VCC-PLL, so needs to be always on. */
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8";
+ };
+
+ /* Supplies VCC-IO, so needs to be always on. */
+ reg_dldo1: dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3";
+ };
+
+ reg_dcdc1: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <990000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd-dram";
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "host"; /* USB A type receptable */
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
index 4c3921a..b69032c 100644
--- a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
@@ -68,7 +68,7 @@
states = <1100000 0>, <1300000 1>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
post-power-on-delay-ms = <200>;
diff --git a/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts
index a3e040d..3a7ee44 100644
--- a/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts
+++ b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts
@@ -103,7 +103,7 @@
states = <1100000 0x0>, <1300000 0x1>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
post-power-on-delay-ms = <200>;
@@ -170,7 +170,7 @@
non-removable;
status = "okay";
- rtl8189etv: sdio_wifi@1 {
+ rtl8189etv: wifi@1 {
reg = <1>;
};
};
diff --git a/arch/arm/dts/sun50i-h5-orangepi-prime.dts b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
index d7f8bad..b699bb9 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
@@ -85,7 +85,7 @@
status = "okay";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
};
diff --git a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
index 7ec5ac8..ae85131 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts
@@ -97,7 +97,7 @@
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
- rtl8189ftv: sdio_wifi@1 {
+ rtl8189ftv: wifi@1 {
reg = <1>;
};
};
diff --git a/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
index 22530ac..734481e 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus2.dts
@@ -52,7 +52,7 @@
regulator-max-microvolt = <3300000>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
post-power-on-delay-ms = <200>;
diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
index 87432c4..529285f 100644
--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
@@ -34,7 +34,7 @@
};
};
- ext_osc32k: ext_osc32k_clk {
+ ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/arch/arm/dts/sun50i-h6-orangepi-3.dts b/arch/arm/dts/sun50i-h6-orangepi-3.dts
index f1957bb..bdcec46 100644
--- a/arch/arm/dts/sun50i-h6-orangepi-3.dts
+++ b/arch/arm/dts/sun50i-h6-orangepi-3.dts
@@ -33,7 +33,7 @@
};
};
- ext_osc32k: ext_osc32k_clk {
+ ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts b/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
index fb31dcb..a3f65a4 100644
--- a/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
+++ b/arch/arm/dts/sun50i-h6-orangepi-lite2.dts
@@ -11,7 +11,7 @@
serial1 = &uart1; /* BT-UART */
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi b/arch/arm/dts/sun50i-h6-orangepi.dtsi
index a5811d5..4403769 100644
--- a/arch/arm/dts/sun50i-h6-orangepi.dtsi
+++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi
@@ -32,7 +32,7 @@
};
};
- ext_osc32k: ext_osc32k_clk {
+ ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts b/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts
index b710f1a..66fe039 100644
--- a/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts
+++ b/arch/arm/dts/sun50i-h6-pine-h64-model-b.dts
@@ -5,13 +5,13 @@
#include "sun50i-h6-pine-h64.dts"
+/delete-node/ ®_gmac_3v3;
+
/ {
model = "Pine H64 model B";
compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
- /delete-node/ reg_gmac_3v3;
-
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
post-power-on-delay-ms = <200>;
diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
index b868ad1..bfb4657 100644
--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
@@ -22,7 +22,7 @@
stdout-path = "serial0:115200n8";
};
- ext_osc32k: ext_osc32k_clk {
+ ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
index 09e2168..82aa567 100644
--- a/arch/arm/dts/sun50i-h6.dtsi
+++ b/arch/arm/dts/sun50i-h6.dtsi
@@ -68,7 +68,7 @@
status = "disabled";
};
- osc24M: osc24M_clk {
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
diff --git a/arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi
index af421ba..d12b01c 100644
--- a/arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi
+++ b/arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi
@@ -6,6 +6,7 @@
/dts-v1/;
#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -62,6 +63,10 @@
};
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&mmc0 {
vmmc-supply = <®_dldo1>;
/* Card detection pin is not connected */
diff --git a/arch/arm/dts/sun50i-h616-cpu-opp.dtsi b/arch/arm/dts/sun50i-h616-cpu-opp.dtsi
new file mode 100644
index 0000000..aca22a7
--- /dev/null
+++ b/arch/arm/dts/sun50i-h616-cpu-opp.dtsi
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2023 Martin Botka <martin@somainline.org>
+
+/ {
+ cpu_opp_table: opp-table-cpu {
+ compatible = "allwinner,sun50i-h616-operating-points";
+ nvmem-cells = <&cpu_speed_grade>;
+ opp-shared;
+
+ opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x1f>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x12>;
+ };
+
+ opp-720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x0d>;
+ };
+
+ opp-792000000 {
+ opp-hz = /bits/ 64 <792000000>;
+ opp-microvolt-speed1 = <900000>;
+ opp-microvolt-speed4 = <940000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x12>;
+ };
+
+ opp-936000000 {
+ opp-hz = /bits/ 64 <936000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x0d>;
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt-speed0 = <950000>;
+ opp-microvolt-speed1 = <940000>;
+ opp-microvolt-speed2 = <950000>;
+ opp-microvolt-speed3 = <950000>;
+ opp-microvolt-speed4 = <1020000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x1f>;
+ };
+
+ opp-1104000000 {
+ opp-hz = /bits/ 64 <1104000000>;
+ opp-microvolt-speed0 = <1000000>;
+ opp-microvolt-speed2 = <1000000>;
+ opp-microvolt-speed3 = <1000000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x0d>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt-speed0 = <1050000>;
+ opp-microvolt-speed1 = <1020000>;
+ opp-microvolt-speed2 = <1050000>;
+ opp-microvolt-speed3 = <1050000>;
+ opp-microvolt-speed4 = <1100000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x1f>;
+ };
+
+ opp-1320000000 {
+ opp-hz = /bits/ 64 <1320000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x1d>;
+ };
+
+ opp-1416000000 {
+ opp-hz = /bits/ 64 <1416000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x0d>;
+ };
+
+ opp-1512000000 {
+ opp-hz = /bits/ 64 <1512000000>;
+ opp-microvolt-speed1 = <1100000>;
+ opp-microvolt-speed3 = <1100000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-supported-hw = <0x0a>;
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm/dts/sun50i-h616-orangepi-zero2.dts b/arch/arm/dts/sun50i-h616-orangepi-zero2.dts
index b5d7139..a360d85 100644
--- a/arch/arm/dts/sun50i-h616-orangepi-zero2.dts
+++ b/arch/arm/dts/sun50i-h616-orangepi-zero2.dts
@@ -6,12 +6,17 @@
/dts-v1/;
#include "sun50i-h616-orangepi-zero.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
/ {
model = "OrangePi Zero2";
compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
};
+&cpu0 {
+ cpu-supply = <®_dcdca>;
+};
+
&emac0 {
allwinner,rx-delay-ps = <3100>;
allwinner,tx-delay-ps = <700>;
diff --git a/arch/arm/dts/sun50i-h616-x96-mate.dts b/arch/arm/dts/sun50i-h616-x96-mate.dts
index 959b6fd..26d25b5 100644
--- a/arch/arm/dts/sun50i-h616-x96-mate.dts
+++ b/arch/arm/dts/sun50i-h616-x96-mate.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -32,6 +33,10 @@
};
};
+&cpu0 {
+ cpu-supply = <®_dcdca>;
+};
+
&ehci0 {
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h616.dtsi b/arch/arm/dts/sun50i-h616.dtsi
index b2e85e5..921d5f6 100644
--- a/arch/arm/dts/sun50i-h616.dtsi
+++ b/arch/arm/dts/sun50i-h616.dtsi
@@ -26,6 +26,7 @@
reg = <0>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
@@ -34,6 +35,7 @@
reg = <1>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
@@ -42,6 +44,7 @@
reg = <2>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
@@ -50,6 +53,7 @@
reg = <3>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
+ #cooling-cells = <2>;
};
};
@@ -156,6 +160,10 @@
ths_calibration: thermal-sensor-calibration@14 {
reg = <0x14 0x8>;
};
+
+ cpu_speed_grade: cpu-speed-grade@0 {
+ reg = <0x0 2>;
+ };
};
watchdog: watchdog@30090a0 {
@@ -194,7 +202,7 @@
};
i2c0_pins: i2c0-pins {
- pins = "PI6", "PI7";
+ pins = "PI5", "PI6";
function = "i2c0";
};
@@ -775,6 +783,15 @@
#reset-cells = <1>;
};
+ nmi_intc: interrupt-controller@7010320 {
+ compatible = "allwinner,sun50i-h616-nmi",
+ "allwinner,sun9i-a80-nmi";
+ reg = <0x07010320 0xc>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
r_pio: pinctrl@7022000 {
compatible = "allwinner,sun50i-h616-r-pinctrl";
reg = <0x07022000 0x400>;
diff --git a/arch/arm/dts/sun50i-h618-longan-module-3h.dtsi b/arch/arm/dts/sun50i-h618-longan-module-3h.dtsi
index 8c1263a..e92d150 100644
--- a/arch/arm/dts/sun50i-h618-longan-module-3h.dtsi
+++ b/arch/arm/dts/sun50i-h618-longan-module-3h.dtsi
@@ -4,6 +4,11 @@
*/
#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
&mmc2 {
pinctrl-names = "default";
diff --git a/arch/arm/dts/sun50i-h618-orangepi-zero2w.dts b/arch/arm/dts/sun50i-h618-orangepi-zero2w.dts
index 21ca197..6a4f0da 100644
--- a/arch/arm/dts/sun50i-h618-orangepi-zero2w.dts
+++ b/arch/arm/dts/sun50i-h618-orangepi-zero2w.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -53,6 +54,10 @@
};
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&ehci1 {
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h618-orangepi-zero3.dts b/arch/arm/dts/sun50i-h618-orangepi-zero3.dts
index b3b1b86..e1cd757 100644
--- a/arch/arm/dts/sun50i-h618-orangepi-zero3.dts
+++ b/arch/arm/dts/sun50i-h618-orangepi-zero3.dts
@@ -6,12 +6,17 @@
/dts-v1/;
#include "sun50i-h616-orangepi-zero.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
/ {
model = "OrangePi Zero3";
compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618";
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&emac0 {
allwinner,tx-delay-ps = <700>;
phy-mode = "rgmii-rxid";
diff --git a/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts b/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts
index ac0a2b7..d6631bf 100644
--- a/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts
+++ b/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -41,7 +42,7 @@
regulator-always-on;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc CLK_OSC32K_FANOUT>;
clock-names = "ext_clock";
@@ -51,6 +52,10 @@
};
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&ehci0 {
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h64-remix-mini-pc.dts b/arch/arm/dts/sun50i-h64-remix-mini-pc.dts
index c1a15d6..464a307 100644
--- a/arch/arm/dts/sun50i-h64-remix-mini-pc.dts
+++ b/arch/arm/dts/sun50i-h64-remix-mini-pc.dts
@@ -42,7 +42,7 @@
regulator-always-on;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
post-power-on-delay-ms = <200>;
diff --git a/arch/arm/dts/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-2024.dts
new file mode 100644
index 0000000..ee30584
--- /dev/null
+++ b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-2024.dts
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Anbernic RG35XX 2024";
+ chassis-type = "handset";
+ compatible = "anbernic,rg35xx-2024", "allwinner,sun50i-h700";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio_keys_gamepad: gpio-keys-gamepad {
+ compatible = "gpio-keys";
+
+ button-a {
+ label = "Action-Pad A";
+ gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_EAST>;
+ };
+
+ button-b {
+ label = "Action-Pad B";
+ gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_SOUTH>;
+ };
+
+ button-down {
+ label = "D-Pad Down";
+ gpios = <&pio 4 0 GPIO_ACTIVE_LOW>; /* PE0 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_DPAD_DOWN>;
+ };
+
+ button-l1 {
+ label = "Key L1";
+ gpios = <&pio 0 10 GPIO_ACTIVE_LOW>; /* PA10 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_TL>;
+ };
+
+ button-l2 {
+ label = "Key L2";
+ gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_TL2>;
+ };
+
+ button-left {
+ label = "D-Pad left";
+ gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_DPAD_LEFT>;
+ };
+
+ button-menu {
+ label = "Key Menu";
+ gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_MODE>;
+ };
+
+ button-r1 {
+ label = "Key R1";
+ gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_TR>;
+ };
+
+ button-r2 {
+ label = "Key R2";
+ gpios = <&pio 0 7 GPIO_ACTIVE_LOW>; /* PA7 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_TR2>;
+ };
+
+ button-right {
+ label = "D-Pad Right";
+ gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_DPAD_RIGHT>;
+ };
+
+ button-select {
+ label = "Key Select";
+ gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_SELECT>;
+ };
+ button-start {
+ label = "Key Start";
+ gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_START>;
+ };
+
+ button-up {
+ label = "D-Pad Up";
+ gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_DPAD_UP>;
+ };
+
+ button-x {
+ label = "Action-Pad X";
+ gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_NORTH>;
+ };
+
+ button-y {
+ label = "Action Pad Y";
+ gpios = <&pio 0 2 GPIO_ACTIVE_LOW>; /* PA2 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_WEST>;
+ };
+ };
+
+ gpio-keys-volume {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ button-vol-up {
+ label = "Key Volume Up";
+ gpios = <&pio 4 1 GPIO_ACTIVE_LOW>; /* PE1 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ button-vol-down {
+ label = "Key Volume Down";
+ gpios = <&pio 4 2 GPIO_ACTIVE_LOW>; /* PE2 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 8 12 GPIO_ACTIVE_HIGH>; /* PI12 */
+ default-state = "on";
+ };
+ };
+
+ reg_vcc5v: regulator-vcc5v { /* USB-C power input */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc1>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_cldo3>;
+ disable-wp;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pa-supply = <®_cldo3>;
+ vcc-pc-supply = <®_cldo3>;
+ vcc-pe-supply = <®_cldo3>;
+ vcc-pf-supply = <®_cldo3>;
+ vcc-pg-supply = <®_aldo4>;
+ vcc-ph-supply = <®_cldo3>;
+ vcc-pi-supply = <®_cldo3>;
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp717: pmic@3a3 {
+ compatible = "x-powers,axp717";
+ reg = <0x3a3>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ vin1-supply = <®_vcc5v>;
+ vin2-supply = <®_vcc5v>;
+ vin3-supply = <®_vcc5v>;
+ vin4-supply = <®_vcc5v>;
+
+ regulators {
+ reg_dcdc1: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <940000>;
+ regulator-max-microvolt = <940000>;
+ regulator-name = "vdd-gpu-sys";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-dram";
+ };
+
+ reg_aldo1: aldo1 {
+ /* 1.8v - unused */
+ };
+
+ reg_aldo2: aldo2 {
+ /* 1.8v - unused */
+ };
+
+ reg_aldo3: aldo3 {
+ /* 1.8v - unused */
+ };
+
+ reg_aldo4: aldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg";
+ };
+
+ reg_bldo1: bldo1 {
+ /* 1.8v - unused */
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pll";
+ };
+
+ reg_bldo3: bldo3 {
+ /* 2.8v - unused */
+ };
+
+ reg_bldo4: bldo4 {
+ /* 1.2v - unused */
+ };
+
+ reg_cldo1: cldo1 {
+ /* 3.3v - audio codec - not yet implemented */
+ };
+
+ reg_cldo2: cldo2 {
+ /* 3.3v - unused */
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-io";
+ };
+
+ reg_cldo4: cldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+ };
+
+ reg_boost: boost {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5200000>;
+ regulator-name = "boost";
+ };
+
+ reg_cpusldo: cpusldo {
+ /* unused */
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+/* the AXP717 has USB type-C role switch functionality, not yet described by the binding */
+&usbotg {
+ dr_mode = "peripheral"; /* USB type-C receptable */
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-h700-anbernic-rg35xx-h.dts b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-h.dts
new file mode 100644
index 0000000..6303625
--- /dev/null
+++ b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-h.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
+ */
+
+#include "sun50i-h700-anbernic-rg35xx-plus.dts"
+
+/ {
+ model = "Anbernic RG35XX H";
+ compatible = "anbernic,rg35xx-h", "allwinner,sun50i-h700";
+};
+
+&gpio_keys_gamepad {
+ button-thumbl {
+ label = "GPIO Thumb Left";
+ gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_THUMBL>;
+ };
+
+ button-thumbr {
+ label = "GPIO Thumb Right";
+ gpios = <&pio 4 9 GPIO_ACTIVE_LOW>; /* PE9 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_THUMBR>;
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-h700-anbernic-rg35xx-plus.dts b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-plus.dts
new file mode 100644
index 0000000..60a8e49
--- /dev/null
+++ b/arch/arm/dts/sun50i-h700-anbernic-rg35xx-plus.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ */
+
+#include "sun50i-h700-anbernic-rg35xx-2024.dts"
+
+/ {
+ model = "Anbernic RG35XX Plus";
+ compatible = "anbernic,rg35xx-plus", "allwinner,sun50i-h700";
+
+ wifi_pwrseq: pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
+ clock-names = "ext_clock";
+ pinctrl-0 = <&x32clk_fanout_pin>;
+ pinctrl-names = "default";
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+ };
+};
+
+/* SDIO WiFi RTL8821CS */
+&mmc1 {
+ vmmc-supply = <®_cldo4>;
+ vqmmc-supply = <®_aldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ sdio_wifi: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 15 IRQ_TYPE_LEVEL_LOW>; /* PG15 */
+ interrupt-names = "host-wake";
+ };
+};
+
+/* Bluetooth RTL8821CS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+ device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
+ enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>; /* PG19 */
+ host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16 */
+ };
+};
diff --git a/arch/arm/dts/sun5i-a13.dtsi b/arch/arm/dts/sun5i-a13.dtsi
index 3325ab0..2c9152b 100644
--- a/arch/arm/dts/sun5i-a13.dtsi
+++ b/arch/arm/dts/sun5i-a13.dtsi
@@ -62,14 +62,14 @@
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit: cpu_crit {
+ cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
diff --git a/arch/arm/dts/sun5i-gr8-chip-pro.dts b/arch/arm/dts/sun5i-gr8-chip-pro.dts
index 5c3562b..ffbd99c 100644
--- a/arch/arm/dts/sun5i-gr8-chip-pro.dts
+++ b/arch/arm/dts/sun5i-gr8-chip-pro.dts
@@ -77,7 +77,7 @@
};
};
- mmc0_pwrseq: mmc0_pwrseq {
+ mmc0_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
};
diff --git a/arch/arm/dts/sun5i-r8-chip.dts b/arch/arm/dts/sun5i-r8-chip.dts
index 4192c23..8c784a2 100644
--- a/arch/arm/dts/sun5i-r8-chip.dts
+++ b/arch/arm/dts/sun5i-r8-chip.dts
@@ -77,7 +77,7 @@
};
};
- mmc0_pwrseq: mmc0_pwrseq {
+ mmc0_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
};
diff --git a/arch/arm/dts/sun6i-a31-hummingbird.dts b/arch/arm/dts/sun6i-a31-hummingbird.dts
index 486cec6..41955fe 100644
--- a/arch/arm/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/dts/sun6i-a31-hummingbird.dts
@@ -109,7 +109,7 @@
};
};
- reg_vga_3v3: vga_3v3_regulator {
+ reg_vga_3v3: vga-3v3-regulator {
compatible = "regulator-fixed";
regulator-name = "vga-3v3";
regulator-min-microvolt = <3300000>;
@@ -119,7 +119,7 @@
gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
};
diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi
index b32d2ab..a65c09e 100644
--- a/arch/arm/dts/sun6i-a31.dtsi
+++ b/arch/arm/dts/sun6i-a31.dtsi
@@ -179,14 +179,14 @@
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <70000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit: cpu_crit {
+ cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
@@ -1315,7 +1315,7 @@
compatible = "allwinner,sun6i-a31-prcm";
reg = <0x01f01400 0x200>;
- ar100: ar100_clk {
+ ar100: ar100-clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
clocks = <&rtc CLK_OSC32K>, <&osc24M>,
@@ -1324,7 +1324,7 @@
clock-output-names = "ar100";
};
- ahb0: ahb0_clk {
+ ahb0: ahb0-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
@@ -1333,14 +1333,14 @@
clock-output-names = "ahb0";
};
- apb0: apb0_clk {
+ apb0: apb0-clk {
compatible = "allwinner,sun6i-a31-apb0-clk";
#clock-cells = <0>;
clocks = <&ahb0>;
clock-output-names = "apb0";
};
- apb0_gates: apb0_gates_clk {
+ apb0_gates: apb0-gates-clk {
compatible = "allwinner,sun6i-a31-apb0-gates-clk";
#clock-cells = <1>;
clocks = <&apb0>;
@@ -1350,14 +1350,14 @@
"apb0_i2c";
};
- ir_clk: ir_clk {
+ ir_clk: ir-clk {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
clocks = <&rtc CLK_OSC32K>, <&osc24M>;
clock-output-names = "ir";
};
- apb0_rst: apb0_rst {
+ apb0_rst: apb0-rst {
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
};
diff --git a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index efb25b9..2f3d93e 100644
--- a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -75,7 +75,7 @@
};
};
- mmc2_pwrseq: mmc2_pwrseq {
+ mmc2_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
};
diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
index caa935c..f2d7fab 100644
--- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -86,7 +86,7 @@
};
};
- mmc3_pwrseq: mmc3_pwrseq {
+ mmc3_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
};
diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
index 52160e3..be9b31d 100644
--- a/arch/arm/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
@@ -96,7 +96,7 @@
};
};
- mmc3_pwrseq: mmc3_pwrseq {
+ mmc3_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
clocks = <&ccu CLK_OUT_A>;
diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts
index 3def2a3..f1e26b7 100644
--- a/arch/arm/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/dts/sun7i-a20-hummingbird.dts
@@ -65,7 +65,7 @@
stdout-path = "serial0:115200n8";
};
- reg_mmc3_vdd: mmc3_vdd {
+ reg_mmc3_vdd: regulator-mmc3-vdd {
compatible = "regulator-fixed";
regulator-name = "mmc3_vdd";
regulator-min-microvolt = <3000000>;
@@ -74,7 +74,7 @@
gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
};
- reg_gmac_vdd: gmac_vdd {
+ reg_gmac_vdd: regulator-gmac-vdd {
compatible = "regulator-fixed";
regulator-name = "gmac_vdd";
regulator-min-microvolt = <3000000>;
diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts
index 20bf09b..fb83573 100644
--- a/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts
+++ b/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts
@@ -14,7 +14,7 @@
model = "Olimex A20-Olimex-SOM-EVB-eMMC";
compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
- mmc2_pwrseq: mmc2_pwrseq {
+ mmc2_pwrseq: pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts
index a59755a..e8977c2 100644
--- a/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts
+++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -13,7 +13,7 @@
model = "Olimex A20-SOM204-EVB-eMMC";
compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
- mmc2_pwrseq: mmc2_pwrseq {
+ mmc2_pwrseq: pwrseq-1 {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
index 54af6c1..a554066 100644
--- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
@@ -65,7 +65,7 @@
};
};
- rtl_pwrseq: rtl_pwrseq {
+ rtl_pwrseq: pwrseq-0 {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
};
@@ -177,7 +177,7 @@
non-removable;
status = "okay";
- rtl8723bs: sdio_wifi@1 {
+ rtl8723bs: wifi@1 {
reg = <1>;
};
};
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
index ecb91fb..435a189 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
@@ -82,7 +82,7 @@
};
};
- reg_axp_ipsout: axp_ipsout {
+ reg_axp_ipsout: regulator-axp-ipsout {
compatible = "regulator-fixed";
regulator-name = "axp-ipsout";
regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
index 3bfae98..29199b6 100644
--- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -60,7 +60,7 @@
stdout-path = "serial0:115200n8";
};
- mmc3_pwrseq: mmc3_pwrseq {
+ mmc3_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
};
diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi
index 5574299..5f44f09 100644
--- a/arch/arm/dts/sun7i-a20.dtsi
+++ b/arch/arm/dts/sun7i-a20.dtsi
@@ -153,14 +153,14 @@
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit: cpu_crit {
+ cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi
index a0cac96..4ebb0a7 100644
--- a/arch/arm/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/dts/sun8i-a23-a33.dtsi
@@ -108,7 +108,7 @@
#size-cells = <1>;
ranges;
- osc24M: osc24M_clk {
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -116,7 +116,7 @@
clock-output-names = "osc24M";
};
- ext_osc32k: ext_osc32k_clk {
+ ext_osc32k: ext-osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
@@ -730,7 +730,7 @@
compatible = "allwinner,sun8i-a23-prcm";
reg = <0x01f01400 0x200>;
- ar100: ar100_clk {
+ ar100: ar100-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
@@ -739,7 +739,7 @@
clock-output-names = "ar100";
};
- ahb0: ahb0_clk {
+ ahb0: ahb0-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
@@ -748,14 +748,14 @@
clock-output-names = "ahb0";
};
- apb0: apb0_clk {
+ apb0: apb0-clk {
compatible = "allwinner,sun8i-a23-apb0-clk";
#clock-cells = <0>;
clocks = <&ahb0>;
clock-output-names = "apb0";
};
- apb0_gates: apb0_gates_clk {
+ apb0_gates: apb0-gates-clk {
compatible = "allwinner,sun8i-a23-apb0-gates-clk";
#clock-cells = <1>;
clocks = <&apb0>;
@@ -764,7 +764,7 @@
"apb0_i2c";
};
- apb0_rst: apb0_rst {
+ apb0_rst: apb0-rst {
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
};
diff --git a/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts
index d5f6aeb..0c585a6 100644
--- a/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -52,7 +52,7 @@
ethernet0 = &esp8089;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
/* The esp8089 needs 200 ms after driving wifi-en high */
@@ -76,7 +76,7 @@
non-removable;
status = "okay";
- esp8089: sdio_wifi@1 {
+ esp8089: wifi@1 {
compatible = "esp,esp8089";
reg = <1>;
esp,crystal-26M-en = <2>;
diff --git a/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts
index 9f9232a..63cb4e1 100644
--- a/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -52,7 +52,7 @@
ethernet0 = &esp8089;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
/* The esp8089 needs 200 ms after driving wifi-en high */
@@ -69,7 +69,7 @@
non-removable;
status = "okay";
- esp8089: sdio_wifi@1 {
+ esp8089: wifi@1 {
compatible = "esp,esp8089";
reg = <1>;
esp,crystal-26M-en = <2>;
diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
index 2dfdd0a..f00ce03 100644
--- a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
@@ -85,7 +85,7 @@
non-removable;
status = "okay";
- rtl8703as: sdio_wifi@1 {
+ rtl8703as: wifi@1 {
reg = <1>;
};
};
diff --git a/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
index 065cb62..162ba93 100644
--- a/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
+++ b/arch/arm/dts/sun8i-a33-inet-d978-rev2.dts
@@ -78,7 +78,7 @@
non-removable;
status = "okay";
- rtl8723bs: sdio_wifi@1 {
+ rtl8723bs: wifi@1 {
reg = <1>;
};
};
diff --git a/arch/arm/dts/sun8i-a33.dtsi b/arch/arm/dts/sun8i-a33.dtsi
index 30fdd27..36b2d78 100644
--- a/arch/arm/dts/sun8i-a33.dtsi
+++ b/arch/arm/dts/sun8i-a33.dtsi
@@ -323,35 +323,35 @@
};
trips {
- cpu_alert0: cpu_alert0 {
+ cpu_alert0: cpu-alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- gpu_alert0: gpu_alert0 {
+ gpu_alert0: gpu-alert0 {
/* milliCelsius */
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_alert1: cpu_alert1 {
+ cpu_alert1: cpu-alert1 {
/* milliCelsius */
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
- gpu_alert1: gpu_alert1 {
+ gpu_alert1: gpu-alert1 {
/* milliCelsius */
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
- cpu_crit: cpu_crit {
+ cpu_crit: cpu-crit {
/* milliCelsius */
temperature = <110000>;
hysteresis = <2000>;
diff --git a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
index 197cf69..582b919 100644
--- a/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/dts/sun8i-a83t-bananapi-m3.dts
@@ -95,7 +95,7 @@
gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&ac100_rtc 1>;
clock-names = "ext_clock";
diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
index e26af7c..c5677f9 100644
--- a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
@@ -144,7 +144,7 @@
compatible = "linux,spdif-dit";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&ac100_rtc 1>;
clock-names = "ext_clock";
diff --git a/arch/arm/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/dts/sun8i-a83t-tbs-a711.dts
index 13ae10f..a2685fb 100644
--- a/arch/arm/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/dts/sun8i-a83t-tbs-a711.dts
@@ -123,7 +123,7 @@
vin-supply = <®_vbat>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi
index cc40622..90f2c08 100644
--- a/arch/arm/dts/sun8i-a83t.dtsi
+++ b/arch/arm/dts/sun8i-a83t.dtsi
@@ -164,7 +164,7 @@
ranges;
/* TODO: PRCM block has a mux for this. */
- osc24M: osc24M_clk {
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -177,14 +177,14 @@
* It is an internal RC-based oscillator.
* TODO: Its controls are in the PRCM block.
*/
- osc16M: osc16M_clk {
+ osc16M: osc16M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <16000000>;
clock-output-names = "osc16M";
};
- osc16Md512: osc16Md512_clk {
+ osc16Md512: osc16Md512-clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <512>;
@@ -1126,7 +1126,7 @@
#reset-cells = <1>;
};
- r_cpucfg@1f01c00 {
+ cpucfg@1f01c00 {
compatible = "allwinner,sun8i-a83t-r-cpucfg";
reg = <0x1f01c00 0x400>;
};
diff --git a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index d729b7c..d3a7c9f 100644
--- a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -103,7 +103,7 @@
cpu-supply = <®_vcc1v2>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
index 3356f42..79b03b3 100644
--- a/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
+++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts
@@ -43,11 +43,12 @@
/* Orange Pi R1 is based on Orange Pi Zero design */
#include "sun8i-h2-plus-orangepi-zero.dts"
+/delete-node/ ®_vcc_wifi;
+
/ {
model = "Xunlong Orange Pi R1";
compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
- /delete-node/ reg_vcc_wifi;
/*
* Ths pin of this regulator is the same with the Wi-Fi extra
@@ -89,7 +90,7 @@
vmmc-supply = <®_vcc3v3>;
vqmmc-supply = <®_vcc3v3>;
- rtl8189etv: sdio_wifi@1 {
+ rtl8189etv: wifi@1 {
reg = <1>;
};
};
diff --git a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
index 3706216..1b001f2 100644
--- a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -80,7 +80,7 @@
};
};
- reg_vcc_wifi: reg_vcc_wifi {
+ reg_vcc_wifi: reg-vcc-wifi {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -105,7 +105,7 @@
states = <1100000 0>, <1300000 1>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
post-power-on-delay-ms = <200>;
@@ -149,7 +149,7 @@
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
- xr819: sdio_wifi@1 {
+ xr819: wifi@1 {
reg = <1>;
};
};
diff --git a/arch/arm/dts/sun8i-h3-beelink-x2.dts b/arch/arm/dts/sun8i-h3-beelink-x2.dts
index a6d38ec..5b77300 100644
--- a/arch/arm/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/dts/sun8i-h3-beelink-x2.dts
@@ -122,7 +122,7 @@
compatible = "linux,spdif-dit";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
@@ -185,7 +185,7 @@
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
- sdiowifi: sdio_wifi@1 {
+ sdiowifi: wifi@1 {
reg = <1>;
};
};
diff --git a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
index 343b02b..2b0566d 100644
--- a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
@@ -87,7 +87,7 @@
vin-supply = <®_vcc5v0>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
@@ -119,7 +119,7 @@
non-removable;
status = "okay";
- sdio_wifi: sdio_wifi@1 {
+ sdio_wifi: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
index 4ba533b..59bd074 100644
--- a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -62,7 +62,7 @@
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
@@ -132,7 +132,7 @@
non-removable;
status = "okay";
- sdio_wifi: sdio_wifi@1 {
+ sdio_wifi: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
index 9e1a33f..6d85370 100644
--- a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
@@ -73,7 +73,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
};
diff --git a/arch/arm/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/dts/sun8i-h3-nanopi-r1.dts
index 42cd113..8706497 100644
--- a/arch/arm/dts/sun8i-h3-nanopi-r1.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-r1.dts
@@ -43,7 +43,7 @@
<1300000 0x1>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm/dts/sun8i-h3-orangepi-2.dts b/arch/arm/dts/sun8i-h3-orangepi-2.dts
index f1f9dbe..d2ae47b 100644
--- a/arch/arm/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-2.dts
@@ -105,7 +105,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
};
@@ -169,7 +169,7 @@
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
- rtl8189: sdio_wifi@1 {
+ rtl8189: wifi@1 {
reg = <1>;
};
};
diff --git a/arch/arm/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/dts/sun8i-h3-orangepi-lite.dts
index 305b34a..6a4316a 100644
--- a/arch/arm/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-lite.dts
@@ -143,7 +143,7 @@
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
- rtl8189ftv: sdio_wifi@1 {
+ rtl8189ftv: wifi@1 {
reg = <1>;
};
};
diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
index babf4cf..8a49b33 100644
--- a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -63,7 +63,7 @@
* Explicitly define the sdio device, so that we can add an ethernet
* alias for it (which e.g. makes u-boot set a mac-address).
*/
- rtl8189ftv: sdio_wifi@1 {
+ rtl8189ftv: wifi@1 {
reg = <1>;
};
};
diff --git a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
index 561ea1d..7a6444a 100644
--- a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -92,7 +92,7 @@
regulator-max-microvolt = <3300000>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
post-power-on-delay-ms = <200>;
diff --git a/arch/arm/dts/sun8i-q8-common.dtsi b/arch/arm/dts/sun8i-q8-common.dtsi
index 3d9a152..2725848 100644
--- a/arch/arm/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/dts/sun8i-q8-common.dtsi
@@ -62,7 +62,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
/*
* Q8 boards use various PL# pins as wifi-en. On other boards
@@ -94,7 +94,7 @@
non-removable;
status = "okay";
- sdio_wifi: sdio_wifi@1 {
+ sdio_wifi: wifi@1 {
reg = <1>;
};
};
diff --git a/arch/arm/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/dts/sun8i-r16-bananapi-m2m.dts
index f97218e..5001f10 100644
--- a/arch/arm/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/dts/sun8i-r16-bananapi-m2m.dts
@@ -88,7 +88,7 @@
regulator-max-microvolt = <5000000>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm/dts/sun8i-r16-parrot.dts b/arch/arm/dts/sun8i-r16-parrot.dts
index 2be1b76..4010996 100644
--- a/arch/arm/dts/sun8i-r16-parrot.dts
+++ b/arch/arm/dts/sun8i-r16-parrot.dts
@@ -75,7 +75,7 @@
};
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
};
diff --git a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
index 28197bb..cd2351a 100644
--- a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -100,7 +100,7 @@
enable-active-high;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
clocks = <&ccu CLK_OUTA>;
diff --git a/arch/arm/dts/sun8i-r40-oka40i-c.dts b/arch/arm/dts/sun8i-r40-oka40i-c.dts
index 0bd1336..15b0b4d 100644
--- a/arch/arm/dts/sun8i-r40-oka40i-c.dts
+++ b/arch/arm/dts/sun8i-r40-oka40i-c.dts
@@ -62,7 +62,7 @@
regulator-max-microvolt = <5000000>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
clocks = <&ccu CLK_OUTA>;
diff --git a/arch/arm/dts/sun8i-s3-pinecube.dts b/arch/arm/dts/sun8i-s3-pinecube.dts
index 20966e9..e0d4404 100644
--- a/arch/arm/dts/sun8i-s3-pinecube.dts
+++ b/arch/arm/dts/sun8i-s3-pinecube.dts
@@ -51,7 +51,7 @@
startup-delay-us = <200000>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
post-power-on-delay-ms = <200>;
diff --git a/arch/arm/dts/sun8i-v3s.dtsi b/arch/arm/dts/sun8i-v3s.dtsi
index e8a0447..9e13c2a 100644
--- a/arch/arm/dts/sun8i-v3s.dtsi
+++ b/arch/arm/dts/sun8i-v3s.dtsi
@@ -98,7 +98,7 @@
#size-cells = <1>;
ranges;
- osc24M: osc24M_clk {
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -106,7 +106,7 @@
clock-output-names = "osc24M";
};
- osc32k: osc32k_clk {
+ osc32k: osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
index 4348710..6575ef2 100644
--- a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -94,7 +94,7 @@
enable-active-high;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
clocks = <&ccu CLK_OUTA>;
diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi
index 7d3f330..a1ae092 100644
--- a/arch/arm/dts/sun9i-a80.dtsi
+++ b/arch/arm/dts/sun9i-a80.dtsi
@@ -196,14 +196,14 @@
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
- mii_phy_tx_clk: mii_phy_tx_clk {
+ mii_phy_tx_clk: mii-phy-tx-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
- gmac_int_tx_clk: gmac_int_tx_clk {
+ gmac_int_tx_clk: gmac-int-tx-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
diff --git a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
index 1d1d127..873817d 100644
--- a/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/dts/sunxi-bananapi-m2-plus.dtsi
@@ -98,7 +98,7 @@
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
clocks = <&rtc CLK_OSC32K_FANOUT>;
diff --git a/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi
index 60804b0..be5f552 100644
--- a/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi
+++ b/arch/arm/dts/sunxi-h3-h5-emlid-neutis.dtsi
@@ -18,7 +18,7 @@
stdout-path = "serial0:115200n8";
};
- wifi_pwrseq: wifi_pwrseq {
+ wifi_pwrseq: pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
post-power-on-delay-ms = <200>;
diff --git a/arch/arm/dts/sunxi-h3-h5.dtsi b/arch/arm/dts/sunxi-h3-h5.dtsi
index bdc796f..43f6938 100644
--- a/arch/arm/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/dts/sunxi-h3-h5.dtsi
@@ -83,7 +83,7 @@
#size-cells = <1>;
ranges;
- osc24M: osc24M_clk {
+ osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -91,7 +91,7 @@
clock-output-names = "osc24M";
};
- osc32k: osc32k_clk {
+ osc32k: osc32k-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
diff --git a/arch/arm/dts/versal-mini-ospi.dtsi b/arch/arm/dts/versal-mini-ospi.dtsi
index 1abe44f..8735292 100644
--- a/arch/arm/dts/versal-mini-ospi.dtsi
+++ b/arch/arm/dts/versal-mini-ospi.dtsi
@@ -36,7 +36,7 @@
ranges;
ospi: spi@f1010000 {
- compatible = "cadence,qspi", "cdns,qspi-nor";
+ compatible = "cdns,qspi-nor";
status = "okay";
reg = <0 0xf1010000 0 0x10000 0 0xc0000000 0 0x20000000>;
clock-names = "ref_clk", "pclk";
diff --git a/arch/arm/dts/versal-net-mini-emmc.dts b/arch/arm/dts/versal-net-mini-emmc.dts
index 8a864ba..e200fb6 100644
--- a/arch/arm/dts/versal-net-mini-emmc.dts
+++ b/arch/arm/dts/versal-net-mini-emmc.dts
@@ -42,14 +42,14 @@
bootph-all;
};
- amba: amba {
+ amba: axi {
bootph-all;
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
- sdhci1: sdhci@f1050000 {
+ sdhci1: mmc@f1050000 {
compatible = "xlnx,versal-net-emmc";
status = "okay";
non-removable;
diff --git a/arch/arm/dts/versal-net-mini-ospi.dtsi b/arch/arm/dts/versal-net-mini-ospi.dtsi
index 5d188db..a9bf7cc 100644
--- a/arch/arm/dts/versal-net-mini-ospi.dtsi
+++ b/arch/arm/dts/versal-net-mini-ospi.dtsi
@@ -42,7 +42,7 @@
bootph-all;
};
- amba: amba {
+ amba: axi {
bootph-all;
compatible = "simple-bus";
#address-cells = <0x2>;
@@ -50,7 +50,7 @@
ranges;
ospi: spi@f1010000 {
- compatible = "cadence,qspi", "cdns,qspi-nor";
+ compatible = "cdns,qspi-nor";
status = "okay";
reg = <0 0xf1010000 0 0x10000>, <0 0xc0000000 0 0x20000000>;
clock-names = "ref_clk", "pclk";
diff --git a/arch/arm/dts/versal-net-mini-qspi.dtsi b/arch/arm/dts/versal-net-mini-qspi.dtsi
index 097b58c..e29a3f3 100644
--- a/arch/arm/dts/versal-net-mini-qspi.dtsi
+++ b/arch/arm/dts/versal-net-mini-qspi.dtsi
@@ -42,7 +42,7 @@
bootph-all;
};
- amba: amba {
+ amba: axi {
bootph-all;
compatible = "simple-bus";
#address-cells = <2>;
diff --git a/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso
index 1727a1c..4de29d5 100644
--- a/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kd-g-revA.dtso
@@ -358,6 +358,7 @@
status = "okay";
rts-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;
linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <10 10>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0_default>;
assigned-clock-rates = <100000000>;
diff --git a/arch/arm/dts/zynqmp-sm-k26-revA.dts b/arch/arm/dts/zynqmp-sm-k26-revA.dts
index 5859e6c..d95a05e 100644
--- a/arch/arm/dts/zynqmp-sm-k26-revA.dts
+++ b/arch/arm/dts/zynqmp-sm-k26-revA.dts
@@ -107,7 +107,7 @@
pwm-fan {
compatible = "pwm-fan";
status = "okay";
- pwms = <&ttc0 2 40000 0>;
+ pwms = <&ttc0 2 40000 1>;
};
};
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 34f592c..6a29f61 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -1025,6 +1025,7 @@
reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
power-domains = <&zynqmp_firmware PD_UART_0>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_UART0>;
};
uart1: serial@ff010000 {
@@ -1036,6 +1037,7 @@
reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
power-domains = <&zynqmp_firmware PD_UART_1>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_UART1>;
};
usb0: usb@ff9d0000 {
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index 513cdac..7abcd1c 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -37,7 +37,6 @@
#ifdef CONFIG_NOR_BOOT
void enable_norboot_pin_mux(void);
#endif
-void am33xx_spl_board_init(void);
int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev);
int am335x_get_mpu_vdd(int sil_rev, int frequency);
int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency);
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ef0caed..b311d17 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -129,7 +129,7 @@
else ifeq ($(CONFIG_ARCH_IMX8M), y)
IMAGE_TYPE := imx8mimage
DEPFILE_EXISTS := 0
-else ifeq ($(CONFIG_ARCH_IMX9), y)
+else ifeq ($(CONFIG_ARCH_IMX9)$(CONFIG_ARCH_IMX8ULP), y)
IMAGE_TYPE := imx8image
DEPFILE_EXISTS := 0
else
@@ -215,7 +215,7 @@
endif
endif
-ifeq ($(CONFIG_ARCH_IMX9), y)
+ifeq ($(CONFIG_ARCH_IMX9)$(CONFIG_ARCH_IMX8ULP), y)
quiet_cmd_imx9_check = CHECK $@
cmd_imx9_check = $(srctree)/tools/imx9_image.sh $@
diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c
index accba50..834aca8 100644
--- a/arch/arm/mach-imx/imx8/cpu.c
+++ b/arch/arm/mach-imx/imx8/cpu.c
@@ -258,14 +258,14 @@
return -EIO;
}
- if (!power_domain_lookup_name("audio_sai0", &pd)) {
+ if (!imx8_power_domain_lookup_name("audio_sai0", &pd)) {
if (power_domain_on(&pd)) {
printf("Error power on SAI0\n");
return -EIO;
}
}
- if (!power_domain_lookup_name("audio_ocram", &pd)) {
+ if (!imx8_power_domain_lookup_name("audio_ocram", &pd)) {
if (power_domain_on(&pd)) {
printf("Error power on HIFI RAM\n");
return -EIO;
diff --git a/arch/arm/mach-imx/imx8ulp/Kconfig b/arch/arm/mach-imx/imx8ulp/Kconfig
index 49ea252..fbca241 100644
--- a/arch/arm/mach-imx/imx8ulp/Kconfig
+++ b/arch/arm/mach-imx/imx8ulp/Kconfig
@@ -23,6 +23,7 @@
config TARGET_IMX8ULP_EVK
bool "imx8ulp_evk"
+ select BINMAN
select IMX8ULP
select SUPPORT_SPL
select IMX8ULP_DRAM
diff --git a/arch/arm/mach-imx/imx8ulp/container.cfg b/arch/arm/mach-imx/imx8ulp/container.cfg
new file mode 100644
index 0000000..029b791
--- /dev/null
+++ b/arch/arm/mach-imx/imx8ulp/container.cfg
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+BOOT_FROM SD 0x400
+SOC_TYPE ULP
+CONTAINER
+IMAGE A35 bl31.bin 0x20040000
+IMAGE A35 u-boot.bin CONFIG_TEXT_BASE
diff --git a/arch/arm/mach-imx/imx8ulp/imximage.cfg b/arch/arm/mach-imx/imx8ulp/imximage.cfg
new file mode 100644
index 0000000..a55359f
--- /dev/null
+++ b/arch/arm/mach-imx/imx8ulp/imximage.cfg
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+BOOT_FROM SD 0x400
+SOC_TYPE ULP
+APPEND mx8ulpa2-ahab-container.img
+CONTAINER
+IMAGE PWR upower.bin
+IMAGE M40 m33_image.bin 0x1ffc2000
+IMAGE A35 u-boot-spl-ddr.bin 0x22020000
diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
index 84a60de..abdc1e4 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -337,14 +337,6 @@
return 0;
}
-/*
- * This function is the place to do per-board things such as ramp up the
- * MPU clock frequency.
- */
-__weak void am33xx_spl_board_init(void)
-{
-}
-
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
static void rtc32k_enable(void)
{
diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c
index e1ea351..649bc07 100644
--- a/arch/arm/mach-omap2/boot-common.c
+++ b/arch/arm/mach-omap2/boot-common.c
@@ -269,7 +269,7 @@
debug("%s: IPU2 failed to start (%d)\n", __func__, ret);
}
-void spl_board_init(void)
+void spl_soc_init(void)
{
/* Prepare console output */
preloader_console_init();
@@ -286,9 +286,6 @@
#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
hw_watchdog_init();
#endif
-#ifdef CONFIG_AM33XX
- am33xx_spl_board_init();
-#endif
if (IS_ENABLED(CONFIG_SPL_BUILD) &&
IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU))
spl_boot_ipu();
diff --git a/arch/arm/mach-rockchip/rk3308/syscon_rk3308.c b/arch/arm/mach-rockchip/rk3308/syscon_rk3308.c
index 2d7e971..e77189e 100644
--- a/arch/arm/mach-rockchip/rk3308/syscon_rk3308.c
+++ b/arch/arm/mach-rockchip/rk3308/syscon_rk3308.c
@@ -16,4 +16,7 @@
.name = "rk3308_syscon",
.id = UCLASS_SYSCON,
.of_match = rk3308_syscon_ids,
+#if CONFIG_IS_ENABLED(OF_REAL)
+ .bind = dm_scan_fdt_dev,
+#endif
};
diff --git a/arch/arm/mach-rockchip/rk3568/Kconfig b/arch/arm/mach-rockchip/rk3568/Kconfig
index 014ebf9..899cf90 100644
--- a/arch/arm/mach-rockchip/rk3568/Kconfig
+++ b/arch/arm/mach-rockchip/rk3568/Kconfig
@@ -32,6 +32,16 @@
help
Pine64 Quartz64 single board computer with a RK3566 SoC.
+config TARGET_RADXA_ZERO_3_RK3566
+ bool "Radxa ZERO 3W/3E"
+ help
+ Radxa ZERO 3W/3E single board computers with a RK3566 SoC.
+
+config TARGET_ORANGEPI_3B_RK3566
+ bool "Xunlong Orange Pi 3B"
+ help
+ Xunlong Orange Pi 3B single board computer with a RK3566 SoC.
+
endchoice
config ROCKCHIP_BOOT_MODE_REG
@@ -54,5 +64,7 @@
source "board/hardkernel/odroid_m1/Kconfig"
source "board/pine64/quartz64_rk3566/Kconfig"
source "board/powkiddy/x55/Kconfig"
+source "board/radxa/zero3-rk3566/Kconfig"
+source "board/xunlong/orangepi-3b-rk3566/Kconfig"
endif
diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig
index e751d64..a76a470 100644
--- a/arch/arm/mach-rockchip/rk3588/Kconfig
+++ b/arch/arm/mach-rockchip/rk3588/Kconfig
@@ -6,6 +6,29 @@
help
RK3588 EVB is a evaluation board for Rockchp RK3588.
+config TARGET_CM3588_NAS_RK3588
+ bool "FriendlyElec CM3588 NAS"
+ select BOARD_LATE_INIT
+ help
+ The CM3588 NAS by FriendlyElec pairs the CM3588 compute module, based
+ on the Rockchip RK3588 SoC, with the CM3588 NAS Kit carrier board.
+
+ Hardware features:
+ - Rockchip RK3588 SoC
+ - 4GB/8GB/16GB LPDDR4x RAM
+ - 0GB/64GB HS400 eMMC
+ - MicroSD card slot
+ - 1x RTL8125B 2.5G Ethernet
+ - 4x M.2 M-Key with PCIe 3.0 x1 (via bifurcation) for NVMe SSDs
+ - 2x USB 3.0 (USB 3.1 Gen1) Type-A, 1x USB 2.0 Type-A
+ - 1x USB 3.0 Type-C with DP AltMode support
+ - 2x HDMI 2.1 out, 1x HDMI in
+ - MIPI-CSI Connector, MIPI-DSI Connector
+ - 40-pin GPIO header
+ - 4 buttons: power, reset, recovery, MASK, user button
+ - 3.5mm Headphone out, 2.0mm PH-2A Mic in
+ - 5V Fan connector, PWM beeper, IR receiver, RTC battery connector
+
config TARGET_JAGUAR_RK3588
bool "Theobroma Systems SBC-RK3588-AMR (Jaguar)"
select BOARD_LATE_INIT
@@ -185,6 +208,34 @@
USB PD over USB Type-C
Size: 100mm x 72mm (Pico-ITX form factor)
+config TARGET_ROCK_5_ITX_RK3588
+ bool "Radxa ROCK-5-ITX RK3588 board"
+ select BOARD_LATE_INIT
+ help
+ Radxa ROCK-5-ITX is a Rockchip RK3588 based SBC (Single Board
+ Computer) by Radxa in the ITX formfactor.
+
+ There are variants depending on the DRAM size : from 4G up to 32G.
+
+ Specification:
+
+ Rockchip Rk3588 SoC
+ 4x ARM Cortex-A76, 4x ARM Cortex-A55
+ 4/8/16/24/32GB memory LPDDR5
+ Mali G610MC4 GPU
+ 2x MIPI CSI 2 multiple lanes connector
+ eMMC
+ uSD slot (up to 128GB)
+ M.2 M-key and M.2 E-key connector
+ 4x SATA
+ 2x USB 2.0 + 4x USB 3.0 Type-A, 2x USB 2.0 Panel, 1x USB 3.0 Type-C
+ 2x HDMI 2.1 output, 1x HDMI input
+ DP via Type-C
+ 2x DSI via PCB connector
+ 2x 2.5 Gbps Ethernet port
+ Front-panel connectors for audio and case-power, -leds
+ Powered by either 12V, ATX power-supply or PoE
+
config TARGET_SIGE7_RK3588
bool "ArmSoM Sige7 RK3588 board"
select BOARD_LATE_INIT
@@ -311,6 +362,7 @@
source "board/armsom/sige7-rk3588/Kconfig"
source "board/edgeble/neural-compute-module-6/Kconfig"
+source "board/friendlyelec/cm3588-nas-rk3588/Kconfig"
source "board/friendlyelec/nanopc-t6-rk3588/Kconfig"
source "board/friendlyelec/nanopi-r6c-rk3588s/Kconfig"
source "board/friendlyelec/nanopi-r6s-rk3588s/Kconfig"
@@ -319,6 +371,7 @@
source "board/turing/turing-rk1-rk3588/Kconfig"
source "board/radxa/rock5a-rk3588s/Kconfig"
source "board/radxa/rock5b-rk3588/Kconfig"
+source "board/radxa/rock-5-itx-rk3588/Kconfig"
source "board/rockchip/evb_rk3588/Kconfig"
source "board/rockchip/toybrick_rk3588/Kconfig"
source "board/theobroma-systems/jaguar_rk3588/Kconfig"
diff --git a/arch/arm/mach-zynq/cpu.c b/arch/arm/mach-zynq/cpu.c
index c75e453..5b6d765 100644
--- a/arch/arm/mach-zynq/cpu.c
+++ b/arch/arm/mach-zynq/cpu.c
@@ -36,9 +36,11 @@
} zynq_fpga_descs[] = {
ZYNQ_DESC(7Z007S),
ZYNQ_DESC(7Z010),
+ ZYNQ_DESC(7Z010_LR),
ZYNQ_DESC(7Z012S),
ZYNQ_DESC(7Z014S),
ZYNQ_DESC(7Z015),
+ ZYNQ_DESC(7Z020_LR),
ZYNQ_DESC(7Z020),
ZYNQ_DESC(7Z030),
ZYNQ_DESC(7Z035),
diff --git a/arch/mips/mach-octeon/octeon_fdt.c b/arch/mips/mach-octeon/octeon_fdt.c
index c74fe9d..15ce292 100644
--- a/arch/mips/mach-octeon/octeon_fdt.c
+++ b/arch/mips/mach-octeon/octeon_fdt.c
@@ -687,13 +687,6 @@
while (node_offset > 0 &&
!(found = !fdt_node_check_compatible(fdt, node_offset, compat))) {
node_offset = fdt_parent_offset(fdt, node_offset);
-#ifdef CONFIG_OCTEON_I2C_FDT
- bus = i2c_get_bus_num_fdt(node_offset);
- if (bus >= 0) {
- debug("%s: Found bus 0x%x\n", __func__, bus);
- return bus;
- }
-#endif
}
if (!found) {
printf("Error: node %d in device tree is not a child of the I2C bus\n",
diff --git a/arch/sandbox/cpu/cpu.c b/arch/sandbox/cpu/cpu.c
index 0ed85b3..4f15a56 100644
--- a/arch/sandbox/cpu/cpu.c
+++ b/arch/sandbox/cpu/cpu.c
@@ -340,6 +340,8 @@
int err;
int fd;
+ if (gd->fdt_blob)
+ return (void *)gd->fdt_blob;
blob = map_sysmem(CONFIG_SYS_FDT_LOAD_ADDR, 0);
*ret = 0;
if (!state->fdt_fname) {
diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c
index 46ff305..f5c9a8a 100644
--- a/arch/sandbox/cpu/os.c
+++ b/arch/sandbox/cpu/os.c
@@ -47,12 +47,24 @@
ssize_t os_read(int fd, void *buf, size_t count)
{
- return read(fd, buf, count);
+ ssize_t ret;
+
+ ret = read(fd, buf, count);
+ if (ret == -1)
+ return -errno;
+
+ return ret;
}
ssize_t os_write(int fd, const void *buf, size_t count)
{
- return write(fd, buf, count);
+ ssize_t ret;
+
+ ret = write(fd, buf, count);
+ if (ret == -1)
+ return -errno;
+
+ return ret;
}
int os_printf(const char *fmt, ...)
@@ -69,6 +81,8 @@
off_t os_lseek(int fd, off_t offset, int whence)
{
+ off_t ret;
+
if (whence == OS_SEEK_SET)
whence = SEEK_SET;
else if (whence == OS_SEEK_CUR)
@@ -77,7 +91,11 @@
whence = SEEK_END;
else
os_exit(1);
- return lseek(fd, offset, whence);
+ ret = lseek(fd, offset, whence);
+ if (ret == -1)
+ return -errno;
+
+ return ret;
}
int os_open(const char *pathname, int os_flags)
@@ -808,7 +826,7 @@
* @count: Number of arguments in @add_args
* Return: 0 if OK, -ENOMEM if out of memory
*/
-static int add_args(char ***argvp, char *add_args[], int count)
+static int add_args(char ***argvp, const char *add_args[], int count)
{
char **argv, **ap;
int argc;
@@ -859,7 +877,7 @@
struct sandbox_state *state = state_get_current();
char mem_fname[30];
int fd, err;
- char *extra_args[5];
+ const char *extra_args[5];
char **argv = state->argv;
int argc;
#ifdef DEBUG
@@ -964,7 +982,7 @@
p = strstr(fname, subdir);
if (p) {
if (*next_prefix)
- /* e.g. ".../tpl/u-boot-spl" to "../spl/u-boot-spl" */
+ /* e.g. ".../tpl/u-boot-spl" to ".../spl/u-boot-spl" */
memcpy(p + 1, next_prefix, strlen(next_prefix));
else
/* e.g. ".../spl/u-boot" to ".../u-boot" */
diff --git a/arch/sandbox/cpu/spl.c b/arch/sandbox/cpu/spl.c
index 9ad9da6..bcb1ca1 100644
--- a/arch/sandbox/cpu/spl.c
+++ b/arch/sandbox/cpu/spl.c
@@ -3,13 +3,18 @@
* Copyright (c) 2016 Google, Inc
*/
+#define LOG_CATEGORY LOGC_BOOT
+
#include <dm.h>
#include <hang.h>
#include <handoff.h>
+#include <image.h>
#include <init.h>
#include <log.h>
+#include <mapmem.h>
#include <os.h>
#include <spl.h>
+#include <upl.h>
#include <asm/global_data.h>
#include <asm/spl.h>
#include <asm/state.h>
@@ -51,7 +56,8 @@
void board_boot_order(u32 *spl_boot_list)
{
spl_boot_list[0] = BOOT_DEVICE_VBE;
- spl_boot_list[1] = BOOT_DEVICE_BOARD;
+ spl_boot_list[1] = BOOT_DEVICE_UPL;
+ spl_boot_list[2] = BOOT_DEVICE_BOARD;
}
static int spl_board_load_file(struct spl_image_info *spl_image,
@@ -179,3 +185,115 @@
return 0;
}
+
+/* Context used to hold file descriptor */
+struct load_ctx {
+ int fd;
+};
+
+static ulong read_fit_image(struct spl_load_info *load, ulong offset,
+ ulong size, void *buf)
+{
+ struct load_ctx *load_ctx = load->priv;
+ off_t ret;
+ ssize_t res;
+
+ ret = os_lseek(load_ctx->fd, offset, OS_SEEK_SET);
+ if (ret < 0) {
+ printf("Failed to seek to %zx, got %zx\n", offset, ret);
+ return log_msg_ret("lse", ret);
+ }
+
+ res = os_read(load_ctx->fd, buf, size);
+ if (res < 0) {
+ printf("Failed to read %lx bytes, got %ld\n", size, res);
+ return log_msg_ret("osr", res);
+ }
+
+ return size;
+}
+
+int sandbox_spl_load_fit(char *fname, int maxlen, struct spl_image_info *image)
+{
+ struct legacy_img_hdr *header;
+ struct load_ctx load_ctx;
+ struct spl_load_info load;
+ int ret;
+ int fd;
+
+ memset(&load, '\0', sizeof(load));
+ spl_set_bl_len(&load, IS_ENABLED(CONFIG_SPL_LOAD_BLOCK) ? 512 : 1);
+ load.read = read_fit_image;
+
+ ret = sandbox_find_next_phase(fname, maxlen, true);
+ if (ret) {
+ printf("%s not found, error %d\n", fname, ret);
+ return log_msg_ret("nph", ret);
+ }
+
+ header = spl_get_load_buffer(-sizeof(*header), sizeof(*header));
+
+ log_debug("reading from %s\n", fname);
+ fd = os_open(fname, OS_O_RDONLY);
+ if (fd < 0) {
+ printf("Failed to open '%s'\n", fname);
+ return log_msg_ret("ope", -errno);
+ }
+ ret = os_read(fd, header, sizeof(*header));
+ if (ret != sizeof(*header)) {
+ printf("Failed to read %lx bytes, got %d\n", sizeof(*header),
+ ret);
+ return log_msg_ret("rea", ret);
+ }
+ load_ctx.fd = fd;
+
+ load.priv = &load_ctx;
+
+ ret = spl_load_simple_fit(image, &load, 0, header);
+ if (ret)
+ return log_msg_ret("slf", ret);
+
+ return 0;
+}
+
+static int upl_load_from_image(struct spl_image_info *spl_image,
+ struct spl_boot_device *bootdev)
+{
+ long long size;
+ char *fname;
+ int ret, fd;
+ ulong addr;
+
+ if (!CONFIG_IS_ENABLED(UPL_OUT))
+ return -ENOTSUPP;
+
+ spl_upl_init();
+ fname = os_malloc(256);
+
+ ret = sandbox_spl_load_fit(fname, 256, spl_image);
+ if (ret)
+ return log_msg_ret("fit", ret);
+ spl_image->flags = SPL_SANDBOXF_ARG_IS_BUF;
+ spl_image->arg = map_sysmem(spl_image->load_addr, 0);
+ /* size is set by load_simple_fit(), offset is left as 0 */
+
+ /* now read the whole FIT into memory */
+ fd = os_open(fname, OS_O_RDONLY);
+ if (fd < 0)
+ return log_msg_ret("op2", -ENOENT);
+ if (os_get_filesize(fname, &size))
+ return log_msg_ret("fis", -ENOENT);
+
+ /* place it after the loaded image, allowing plenty of space */
+ addr = ALIGN(spl_image->load_addr + size, 0x1000);
+ log_debug("Loading whole FIT to %lx\n", addr);
+ if (os_read(fd, map_sysmem(addr, 0), size) != size)
+ return log_msg_ret("rea", -EIO);
+ os_close(fd);
+
+ /* tell UPL where it is */
+ upl_set_fit_addr(addr);
+
+ return 0;
+}
+SPL_LOAD_IMAGE_METHOD("upl", 4, BOOT_DEVICE_UPL, upl_load_from_image);
diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c
index dce8041..9ad5d46 100644
--- a/arch/sandbox/cpu/start.c
+++ b/arch/sandbox/cpu/start.c
@@ -431,6 +431,14 @@
}
SANDBOX_CMDLINE_OPT(autoboot_keyed, 0, "Allow keyed autoboot");
+static int sandbox_cmdline_cb_upl(struct sandbox_state *state, const char *arg)
+{
+ state->upl = true;
+
+ return 0;
+}
+SANDBOX_CMDLINE_OPT(upl, 0, "Enable Universal Payload (UPL)");
+
static void setup_ram_buf(struct sandbox_state *state)
{
/* Zero the RAM buffer if we didn't read it, to keep valgrind happy */
@@ -483,6 +491,9 @@
text_base = os_find_text_base();
+ memset(&data, '\0', sizeof(data));
+ gd = &data;
+
/*
* This must be the first invocation of os_malloc() to have
* state->ram_buf in the low 4 GiB.
@@ -501,8 +512,6 @@
os_exit(1);
memcpy(os_argv, argv, size);
- memset(&data, '\0', sizeof(data));
- gd = &data;
gd->arch.text_base = text_base;
state = state_get_current();
@@ -539,6 +548,9 @@
goto err;
}
+ if (state->upl)
+ gd->flags |= GD_FLG_UPL;
+
#if CONFIG_IS_ENABLED(SYS_MALLOC_F)
gd->malloc_base = CFG_MALLOC_F_ADDR;
#endif
@@ -557,7 +569,7 @@
log_debug("debug: %s\n", __func__);
/* Do pre- and post-relocation init */
- board_init_f(0);
+ board_init_f(gd->flags);
board_init_r(gd->new_gd, 0);
diff --git a/arch/sandbox/include/asm/spl.h b/arch/sandbox/include/asm/spl.h
index 4fab24c..d824b21 100644
--- a/arch/sandbox/include/asm/spl.h
+++ b/arch/sandbox/include/asm/spl.h
@@ -6,6 +6,8 @@
#ifndef __asm_spl_h
#define __asm_spl_h
+struct spl_image_info;
+
enum {
BOOT_DEVICE_MMC1,
BOOT_DEVICE_MMC2,
@@ -16,6 +18,7 @@
BOOT_DEVICE_NOR,
BOOT_DEVICE_SPI,
BOOT_DEVICE_NAND,
+ BOOT_DEVICE_UPL,
};
/**
@@ -31,4 +34,16 @@
*/
int sandbox_find_next_phase(char *fname, int maxlen, bool use_img);
+/**
+ * sandbox_spl_load_fit() - Load the next phase from a FIT
+ *
+ * Loads a FIT containing the next phase and sets it up for booting
+ *
+ * @fname: Returns filename loaded
+ * @maxlen: Maximum length for @fname including \0
+ * @image: Place to put SPL-image information
+ * Return: 0 if OK, -ve on error
+ */
+int sandbox_spl_load_fit(char *fname, int maxlen, struct spl_image_info *image);
+
#endif
diff --git a/arch/sandbox/include/asm/state.h b/arch/sandbox/include/asm/state.h
index c84a1f7..6b50473 100644
--- a/arch/sandbox/include/asm/state.h
+++ b/arch/sandbox/include/asm/state.h
@@ -97,6 +97,7 @@
bool autoboot_keyed; /* Use keyed-autoboot feature */
bool disable_eth; /* Disable Ethernet devices */
bool disable_sf_bootdevs; /* Don't bind SPI flash bootdevs */
+ bool upl; /* Enable Universal Payload (UPL) */
/* Pointer to information for each SPI bus/cs */
struct sandbox_spi_info spi[CONFIG_SANDBOX_SPI_MAX_BUS]
diff --git a/arch/x86/include/asm/posix_types.h b/arch/x86/include/asm/posix_types.h
index dbcea7f..e1ed9bc 100644
--- a/arch/x86/include/asm/posix_types.h
+++ b/arch/x86/include/asm/posix_types.h
@@ -20,11 +20,12 @@
#if defined(__x86_64__)
typedef unsigned long __kernel_size_t;
typedef long __kernel_ssize_t;
+typedef long __kernel_ptrdiff_t;
#else
typedef unsigned int __kernel_size_t;
typedef int __kernel_ssize_t;
-#endif
typedef int __kernel_ptrdiff_t;
+#endif
typedef long __kernel_time_t;
typedef long __kernel_suseconds_t;
typedef long __kernel_clock_t;
diff --git a/board/BuR/brppt1/board.c b/board/BuR/brppt1/board.c
index 192a2fa..80e0ca8 100644
--- a/board/BuR/brppt1/board.c
+++ b/board/BuR/brppt1/board.c
@@ -79,7 +79,7 @@
#define OSC (V_OSCK/1000000)
static const struct dpll_params dpll_ddr3 = { 400, OSC-1, 1, -1, -1, -1, -1};
-void am33xx_spl_board_init(void)
+void spl_board_init(void)
{
int rc;
diff --git a/board/BuR/brsmarc1/board.c b/board/BuR/brsmarc1/board.c
index 2d3f593..bfb6adf 100644
--- a/board/BuR/brsmarc1/board.c
+++ b/board/BuR/brsmarc1/board.c
@@ -72,7 +72,7 @@
#define OSC (V_OSCK / 1000000)
const struct dpll_params dpll_ddr3 = { 400, OSC - 1, 1, -1, -1, -1, -1};
-void am33xx_spl_board_init(void)
+void spl_board_init(void)
{
struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;
diff --git a/board/BuR/brxre1/board.c b/board/BuR/brxre1/board.c
index b9b595c..510d2af 100644
--- a/board/BuR/brxre1/board.c
+++ b/board/BuR/brxre1/board.c
@@ -79,7 +79,7 @@
#define OSC (V_OSCK / 1000000)
const struct dpll_params dpll_ddr3 = { 400, OSC - 1, 1, -1, -1, -1, -1};
-void am33xx_spl_board_init(void)
+void spl_board_init(void)
{
int rc;
diff --git a/board/armltd/corstone1000/MAINTAINERS b/board/armltd/corstone1000/MAINTAINERS
index 1cc9aaa..ede4b00 100644
--- a/board/armltd/corstone1000/MAINTAINERS
+++ b/board/armltd/corstone1000/MAINTAINERS
@@ -1,6 +1,6 @@
CORSTONE1000 BOARD
M: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
-M: Xueliang Zhong <xueliang.zhong@arm.com>
+M: Hugues Kamba Mpiana <hugues.kambampiana@arm.com>
S: Maintained
F: board/armltd/corstone1000/
F: include/configs/corstone1000.h
diff --git a/board/bosch/guardian/board.c b/board/bosch/guardian/board.c
index 41d7567..33ba7a7 100644
--- a/board/bosch/guardian/board.c
+++ b/board/bosch/guardian/board.c
@@ -75,7 +75,7 @@
const struct dpll_params dpll_ddr = {
400, OSC - 1, 1, -1, -1, -1, -1};
-void am33xx_spl_board_init(void)
+void spl_board_init(void)
{
int mpu_vdd;
int usb_cur_lim;
diff --git a/board/bosch/shc/board.c b/board/bosch/shc/board.c
index ab68874..1f9dc2d 100644
--- a/board/bosch/shc/board.c
+++ b/board/bosch/shc/board.c
@@ -34,6 +34,7 @@
#include <asm/emif.h>
#include <asm/gpio.h>
#include <i2c.h>
+#include <i2c_eeprom.h>
#include <miiphy.h>
#include <cpsw.h>
#include <linux/delay.h>
@@ -51,21 +52,21 @@
/*
* Read header information from EEPROM into global structure.
*/
-#define EEPROM_ADDR 0x50
static int read_eeprom(void)
{
+ struct udevice *dev;
+ int ret;
+
/* Check if baseboard eeprom is available */
- if (i2c_probe(EEPROM_ADDR)) {
- puts("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n");
- return -ENODEV;
+ ret = uclass_first_device_err(UCLASS_I2C_EEPROM, &dev);
+ if (ret) {
+ puts("Could not find EEPROM.\n");
+ return ret;
}
- /* read the eeprom using i2c */
- if (i2c_read(EEPROM_ADDR, 0, 2, (uchar *)&header,
- sizeof(header))) {
- puts("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\n");
- return -EIO;
- }
+ ret = i2c_eeprom_read(dev, 0, (uint8_t *)&header, sizeof(header));
+ if (ret)
+ return ret;
if (header.magic != HDR_MAGIC) {
printf("Incorrect magic number (0x%x) in EEPROM\n",
@@ -310,7 +311,7 @@
const struct dpll_params dpll_mpu_shc_opp100 = {
99, MPUPLL_N, 1, -1, -1, -1, -1};
-void am33xx_spl_board_init(void)
+void spl_board_init(void)
{
int sil_rev;
int mpu_vdd;
@@ -445,7 +446,6 @@
#if defined(CONFIG_HW_WATCHDOG)
hw_watchdog_init();
#endif
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
if (read_eeprom() < 0)
puts("EEPROM Content Invalid.\n");
diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index c6d33c3..40047cf 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -14,6 +14,7 @@
#include <env.h>
#include <fsl_esdhc_imx.h>
#include <init.h>
+#include <i2c.h>
#include <miiphy.h>
#include <mtd_node.h>
#include <net.h>
@@ -256,7 +257,7 @@
{
int ret;
- ret = setup_i2c(busnum, CONFIG_SYS_I2C_SPEED, 0x7f, pads);
+ ret = setup_i2c(busnum, I2C_SPEED_STANDARD_RATE, 0x7f, pads);
if (ret)
printf("Warning: I2C%d setup failed: %d\n", busnum, ret);
diff --git a/board/compulab/cm_t43/cm_t43.c b/board/compulab/cm_t43/cm_t43.c
index 1815819..983991e 100644
--- a/board/compulab/cm_t43/cm_t43.c
+++ b/board/compulab/cm_t43/cm_t43.c
@@ -48,8 +48,6 @@
gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100;
gpmc_init();
set_i2c_pin_mux();
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- i2c_probe(TPS65218_CHIP_PM);
return 0;
}
diff --git a/board/compulab/common/Makefile b/board/compulab/common/Makefile
index 7c8226e..c7b2237 100644
--- a/board/compulab/common/Makefile
+++ b/board/compulab/common/Makefile
@@ -4,6 +4,12 @@
#
# Author: Igor Grinberg <grinberg@compulab.co.il>
+CL_EEPROM=y
+
+ifdef CONFIG_TARGET_TRIMSLICE
+CL_EEPROM=
+endif
+
obj-y += common.o
-obj-$(CONFIG_$(SPL_)SYS_I2C_LEGACY) += eeprom.o
+obj-$(CL_EEPROM) += eeprom.o
obj-$(CONFIG_SMC911X) += omap3_smc911x.o
diff --git a/board/compulab/common/eeprom.c b/board/compulab/common/eeprom.c
index efdaf34..1b12d09 100644
--- a/board/compulab/common/eeprom.c
+++ b/board/compulab/common/eeprom.c
@@ -34,19 +34,15 @@
static int cl_eeprom_read(uint offset, uchar *buf, int len)
{
+ struct udevice *eeprom;
int res;
- unsigned int current_i2c_bus = i2c_get_bus_num();
- res = i2c_set_bus_num(cl_eeprom_bus);
- if (res < 0)
+ res = i2c_get_chip_for_busnum(cl_eeprom_bus, CONFIG_SYS_I2C_EEPROM_ADDR,
+ CONFIG_SYS_I2C_EEPROM_ADDR_LEN, &eeprom);
+ if (res)
return res;
- res = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, offset,
- CONFIG_SYS_I2C_EEPROM_ADDR_LEN, buf, len);
-
- i2c_set_bus_num(current_i2c_bus);
-
- return res;
+ return dm_i2c_read(eeprom, offset, (uint8_t *)buf, len);
}
static int cl_eeprom_setup(uint eeprom_bus)
diff --git a/board/compulab/common/eeprom.h b/board/compulab/common/eeprom.h
index 9bd7604..0a44926 100644
--- a/board/compulab/common/eeprom.h
+++ b/board/compulab/common/eeprom.h
@@ -10,7 +10,7 @@
#define _EEPROM_
#include <errno.h>
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
+#if !CONFIG_IS_ENABLED(TARGET_TRIMSLICE)
int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus);
u32 cl_eeprom_get_board_rev(uint eeprom_bus);
int cl_eeprom_get_product_name(uchar *buf, uint eeprom_bus);
diff --git a/board/eets/pdu001/board.c b/board/eets/pdu001/board.c
index 2ad256f..00f9a5e 100644
--- a/board/eets/pdu001/board.c
+++ b/board/eets/pdu001/board.c
@@ -56,10 +56,10 @@
* boot device save register
* -------------------------
* The boot device can be quired by 'spl_boot_device()' in
- * 'am33xx_spl_board_init'. However it can't be saved in the u-boot
+ * 'spl_board_init'. However it can't be saved in the u-boot
* environment here. In turn 'spl_boot_device' can't be called in
* 'board_late_init' which allows writing to u-boot environment.
- * To get the boot device from 'am33xx_spl_board_init' to
+ * To get the boot device from 'spl_board_init' to
* 'board_late_init' we therefore use a scratch register from the RTC.
*/
#define CFG_SYS_RTC_SCRATCH0 0x60
@@ -192,7 +192,7 @@
const struct dpll_params dpll_ddr_bone_black = {
400, OSC - 1, 1, -1, -1, -1, -1};
-void am33xx_spl_board_init(void)
+void spl_board_init(void)
{
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
diff --git a/board/friendlyelec/cm3588-nas-rk3588/Kconfig b/board/friendlyelec/cm3588-nas-rk3588/Kconfig
new file mode 100644
index 0000000..fdc458a
--- /dev/null
+++ b/board/friendlyelec/cm3588-nas-rk3588/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_CM3588_NAS_RK3588
+
+config SYS_BOARD
+ default "cm3588-nas-rk3588"
+
+config SYS_VENDOR
+ default "friendlyelec"
+
+config SYS_CONFIG_NAME
+ default "nanopc-t6-rk3588"
+
+endif
diff --git a/board/friendlyelec/cm3588-nas-rk3588/MAINTAINERS b/board/friendlyelec/cm3588-nas-rk3588/MAINTAINERS
new file mode 100644
index 0000000..92b958a
--- /dev/null
+++ b/board/friendlyelec/cm3588-nas-rk3588/MAINTAINERS
@@ -0,0 +1,6 @@
+CM3588-NAS-RK3588
+M: Jonas Karlman <jonas@kwiboo.se>
+S: Maintained
+F: board/friendlyelec/cm3588-nas-rk3588
+F: configs/cm3588-nas-rk3588_defconfig
+F: arch/arm/dts/rk3588-friendlyelec-cm3588-nas*
diff --git a/board/grinn/chiliboard/board.c b/board/grinn/chiliboard/board.c
index 8313b37..e0eb8aa 100644
--- a/board/grinn/chiliboard/board.c
+++ b/board/grinn/chiliboard/board.c
@@ -80,7 +80,7 @@
enable_board_pin_mux();
}
-void am33xx_spl_board_init(void)
+void spl_board_init(void)
{
chilisom_spl_board_init();
}
diff --git a/board/kosagi/novena/novena.c b/board/kosagi/novena/novena.c
index 3220727..f65551e 100644
--- a/board/kosagi/novena/novena.c
+++ b/board/kosagi/novena/novena.c
@@ -137,23 +137,23 @@
int misc_init_r(void)
{
struct novena_eeprom_data data;
- uchar *datap = (uchar *)&data;
+ uint8_t *datap = (uint8_t *)&data;
const char *signature = "Novena";
+ struct udevice *eeprom;
int ret;
/* If 'ethaddr' is already set, do nothing. */
if (env_get("ethaddr"))
return 0;
- /* EEPROM is at bus 2. */
- ret = i2c_set_bus_num(2);
+ /* EEPROM is at bus 2, address 0x56 */
+ ret = i2c_get_chip_for_busnum(2, 0x56, 1, &eeprom);
if (ret) {
puts("Cannot select EEPROM I2C bus.\n");
return 0;
}
- /* EEPROM is at address 0x56. */
- ret = eeprom_read(0x56, 0, datap, sizeof(data));
+ ret = dm_i2c_read(eeprom, 0, datap, sizeof(data));
if (ret) {
puts("Cannot read I2C EEPROM.\n");
return 0;
diff --git a/board/kosagi/novena/video.c b/board/kosagi/novena/video.c
index be5a737..67f9843 100644
--- a/board/kosagi/novena/video.c
+++ b/board/kosagi/novena/video.c
@@ -58,28 +58,29 @@
#define IT6521_RETRY_MAX 20
+static struct udevice *it6251_chip;
+static struct udevice *it6251_lvds;
+
static int it6251_is_stable(void)
{
- const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
- const unsigned int laddr = NOVENA_IT6251_LVDSADDR;
int status;
int clkcnt;
int rpclkcnt;
int refstate;
- rpclkcnt = (i2c_reg_read(caddr, 0x13) & 0xff) |
- ((i2c_reg_read(caddr, 0x14) << 8) & 0x0f00);
+ rpclkcnt = (dm_i2c_reg_read(it6251_chip, 0x13) & 0xff) |
+ ((dm_i2c_reg_read(it6251_chip, 0x14) << 8) & 0x0f00);
debug("RPCLKCnt: %d\n", rpclkcnt);
- status = i2c_reg_read(caddr, IT6251_SYSTEM_STATUS);
+ status = dm_i2c_reg_read(it6251_chip, IT6251_SYSTEM_STATUS);
debug("System status: 0x%02x\n", status);
- clkcnt = (i2c_reg_read(laddr, IT6251_REG_PCLK_CNT_LOW) & 0xff) |
- ((i2c_reg_read(laddr, IT6251_REG_PCLK_CNT_HIGH) << 8) &
+ clkcnt = (dm_i2c_reg_read(it6251_lvds, IT6251_REG_PCLK_CNT_LOW) & 0xff) |
+ ((dm_i2c_reg_read(it6251_lvds, IT6251_REG_PCLK_CNT_HIGH) << 8) &
0x0f00);
debug("Clock: 0x%02x\n", clkcnt);
- refstate = i2c_reg_read(laddr, IT6251_REF_STATE);
+ refstate = dm_i2c_reg_read(it6251_lvds, IT6251_REF_STATE);
debug("Ref Link State: 0x%02x\n", refstate);
if ((refstate & 0x1f) != 0)
@@ -97,16 +98,14 @@
static int it6251_ready(void)
{
- const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
-
/* Test if the IT6251 came out of reset by reading ID regs. */
- if (i2c_reg_read(caddr, IT6251_VENDOR_ID_LOW) != 0x15)
+ if (dm_i2c_reg_read(it6251_chip, IT6251_VENDOR_ID_LOW) != 0x15)
return 0;
- if (i2c_reg_read(caddr, IT6251_VENDOR_ID_HIGH) != 0xca)
+ if (dm_i2c_reg_read(it6251_chip, IT6251_VENDOR_ID_HIGH) != 0xca)
return 0;
- if (i2c_reg_read(caddr, IT6251_DEVICE_ID_LOW) != 0x51)
+ if (dm_i2c_reg_read(it6251_chip, IT6251_DEVICE_ID_LOW) != 0x51)
return 0;
- if (i2c_reg_read(caddr, IT6251_DEVICE_ID_HIGH) != 0x62)
+ if (dm_i2c_reg_read(it6251_chip, IT6251_DEVICE_ID_HIGH) != 0x62)
return 0;
return 1;
@@ -114,116 +113,112 @@
static void it6251_program_regs(void)
{
- const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
- const unsigned int laddr = NOVENA_IT6251_LVDSADDR;
-
- i2c_reg_write(caddr, 0x05, 0x00);
+ dm_i2c_reg_write(it6251_chip, 0x05, 0x00);
mdelay(1);
/* set LVDSRX address, and enable */
- i2c_reg_write(caddr, 0xfd, 0xbc);
- i2c_reg_write(caddr, 0xfe, 0x01);
+ dm_i2c_reg_write(it6251_chip, 0xfd, 0xbc);
+ dm_i2c_reg_write(it6251_chip, 0xfe, 0x01);
/*
* LVDSRX
*/
/* This write always fails, because the chip goes into reset */
/* reset LVDSRX */
- i2c_reg_write(laddr, 0x05, 0xff);
- i2c_reg_write(laddr, 0x05, 0x00);
+ dm_i2c_reg_write(it6251_lvds, 0x05, 0xff);
+ dm_i2c_reg_write(it6251_lvds, 0x05, 0x00);
/* reset LVDSRX PLL */
- i2c_reg_write(laddr, 0x3b, 0x42);
- i2c_reg_write(laddr, 0x3b, 0x43);
+ dm_i2c_reg_write(it6251_lvds, 0x3b, 0x42);
+ dm_i2c_reg_write(it6251_lvds, 0x3b, 0x43);
/* something with SSC PLL */
- i2c_reg_write(laddr, 0x3c, 0x08);
+ dm_i2c_reg_write(it6251_lvds, 0x3c, 0x08);
/* don't swap links, but writing reserved registers */
- i2c_reg_write(laddr, 0x0b, 0x88);
+ dm_i2c_reg_write(it6251_lvds, 0x0b, 0x88);
/* JEIDA, 8-bit depth 0x11, orig 0x42 */
- i2c_reg_write(laddr, 0x2c, 0x01);
+ dm_i2c_reg_write(it6251_lvds, 0x2c, 0x01);
/* "reserved" */
- i2c_reg_write(laddr, 0x32, 0x04);
+ dm_i2c_reg_write(it6251_lvds, 0x32, 0x04);
/* "reserved" */
- i2c_reg_write(laddr, 0x35, 0xe0);
+ dm_i2c_reg_write(it6251_lvds, 0x35, 0xe0);
/* "reserved" + clock delay */
- i2c_reg_write(laddr, 0x2b, 0x24);
+ dm_i2c_reg_write(it6251_lvds, 0x2b, 0x24);
/* reset LVDSRX pix clock */
- i2c_reg_write(laddr, 0x05, 0x02);
- i2c_reg_write(laddr, 0x05, 0x00);
+ dm_i2c_reg_write(it6251_lvds, 0x05, 0x02);
+ dm_i2c_reg_write(it6251_lvds, 0x05, 0x00);
/*
* DPTX
*/
/* set for two lane mode, normal op, no swapping, no downspread */
- i2c_reg_write(caddr, 0x16, 0x02);
+ dm_i2c_reg_write(it6251_chip, 0x16, 0x02);
/* some AUX channel EDID magic */
- i2c_reg_write(caddr, 0x23, 0x40);
+ dm_i2c_reg_write(it6251_chip, 0x23, 0x40);
/* power down lanes 3-0 */
- i2c_reg_write(caddr, 0x5c, 0xf3);
+ dm_i2c_reg_write(it6251_chip, 0x5c, 0xf3);
/* enable DP scrambling, change EQ CR phase */
- i2c_reg_write(caddr, 0x5f, 0x06);
+ dm_i2c_reg_write(it6251_chip, 0x5f, 0x06);
/* color mode RGB, pclk/2 */
- i2c_reg_write(caddr, 0x60, 0x02);
+ dm_i2c_reg_write(it6251_chip, 0x60, 0x02);
/* dual pixel input mode, no EO swap, no RGB swap */
- i2c_reg_write(caddr, 0x61, 0x04);
+ dm_i2c_reg_write(it6251_chip, 0x61, 0x04);
/* M444B24 video format */
- i2c_reg_write(caddr, 0x62, 0x01);
+ dm_i2c_reg_write(it6251_chip, 0x62, 0x01);
/* vesa range / not interlace / vsync high / hsync high */
- i2c_reg_write(caddr, 0xa0, 0x0F);
+ dm_i2c_reg_write(it6251_chip, 0xa0, 0x0F);
/* hpd event timer set to 1.6-ish ms */
- i2c_reg_write(caddr, 0xc9, 0xf5);
+ dm_i2c_reg_write(it6251_chip, 0xc9, 0xf5);
/* more reserved magic */
- i2c_reg_write(caddr, 0xca, 0x4d);
- i2c_reg_write(caddr, 0xcb, 0x37);
+ dm_i2c_reg_write(it6251_chip, 0xca, 0x4d);
+ dm_i2c_reg_write(it6251_chip, 0xcb, 0x37);
/* enhanced framing mode, auto video fifo reset, video mute disable */
- i2c_reg_write(caddr, 0xd3, 0x03);
+ dm_i2c_reg_write(it6251_chip, 0xd3, 0x03);
/* "vidstmp" and some reserved stuff */
- i2c_reg_write(caddr, 0xd4, 0x45);
+ dm_i2c_reg_write(it6251_chip, 0xd4, 0x45);
/* queue number -- reserved */
- i2c_reg_write(caddr, 0xe7, 0xa0);
+ dm_i2c_reg_write(it6251_chip, 0xe7, 0xa0);
/* info frame packets and reserved */
- i2c_reg_write(caddr, 0xe8, 0x33);
+ dm_i2c_reg_write(it6251_chip, 0xe8, 0x33);
/* more AVI stuff */
- i2c_reg_write(caddr, 0xec, 0x00);
+ dm_i2c_reg_write(it6251_chip, 0xec, 0x00);
/* select PC master reg for aux channel? */
- i2c_reg_write(caddr, 0x23, 0x42);
+ dm_i2c_reg_write(it6251_chip, 0x23, 0x42);
/* send PC request commands */
- i2c_reg_write(caddr, 0x24, 0x00);
- i2c_reg_write(caddr, 0x25, 0x00);
- i2c_reg_write(caddr, 0x26, 0x00);
+ dm_i2c_reg_write(it6251_chip, 0x24, 0x00);
+ dm_i2c_reg_write(it6251_chip, 0x25, 0x00);
+ dm_i2c_reg_write(it6251_chip, 0x26, 0x00);
/* native aux read */
- i2c_reg_write(caddr, 0x2b, 0x00);
+ dm_i2c_reg_write(it6251_chip, 0x2b, 0x00);
/* back to internal */
- i2c_reg_write(caddr, 0x23, 0x40);
+ dm_i2c_reg_write(it6251_chip, 0x23, 0x40);
/* voltage swing level 3 */
- i2c_reg_write(caddr, 0x19, 0xff);
+ dm_i2c_reg_write(it6251_chip, 0x19, 0xff);
/* pre-emphasis level 3 */
- i2c_reg_write(caddr, 0x1a, 0xff);
+ dm_i2c_reg_write(it6251_chip, 0x1a, 0xff);
/* start link training */
- i2c_reg_write(caddr, 0x17, 0x01);
+ dm_i2c_reg_write(it6251_chip, 0x17, 0x01);
}
static int it6251_init(void)
{
- const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
int reg;
int tries, retries = 0;
@@ -233,7 +228,7 @@
/* Wait for video stable. */
for (tries = 0; tries < 100; tries++) {
- reg = i2c_reg_read(caddr, 0x17);
+ reg = dm_i2c_reg_read(it6251_chip, 0x17);
/* Test Link CFG, STS, LCS read done. */
if ((reg & 0xe0) != 0xe0) {
/* Not yet, wait a bit more. */
@@ -285,10 +280,14 @@
enable_lvds(dev);
- ret = i2c_set_bus_num(NOVENA_IT6251_I2C_BUS);
- if (ret) {
- puts("Cannot select IT6251 I2C bus.\n");
- return 0;
+ if (!it6251_chip) {
+ ret = i2c_get_chip_for_busnum(NOVENA_IT6251_I2C_BUS,
+ NOVENA_IT6251_CHIPADDR,
+ 1, &it6251_chip);
+ if (ret) {
+ puts("Cannot select IT6251 I2C bus.\n");
+ return 0;
+ }
}
/* Wait up-to ~250 mS for the LVDS to come up. */
@@ -435,9 +434,20 @@
{
int ret;
+ if (!it6251_chip) {
+ ret = i2c_get_chip_for_busnum(NOVENA_IT6251_I2C_BUS,
+ NOVENA_IT6251_CHIPADDR,
+ 1, &it6251_chip);
+ if (ret) {
+ puts("Cannot select LVDS-to-eDP I2C bus.\n");
+ return;
+ }
+ }
+
- ret = i2c_set_bus_num(NOVENA_IT6251_I2C_BUS);
+ ret = i2c_get_chip_for_busnum(NOVENA_IT6251_I2C_BUS,
+ NOVENA_IT6251_LVDSADDR, 1, &it6251_lvds);
if (ret) {
- puts("Cannot select LVDS-to-eDP I2C bus.\n");
+ puts("Cannot find IT6251 LVDS bus.\n");
return;
}
diff --git a/board/lg/sniper/sniper.c b/board/lg/sniper/sniper.c
index 88d5d08..9d0959f 100644
--- a/board/lg/sniper/sniper.c
+++ b/board/lg/sniper/sniper.c
@@ -14,11 +14,9 @@
#include <linux/ctype.h>
#include <linux/usb/musb.h>
#include <asm/omap_musb.h>
-#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mem.h>
#include <asm/io.h>
-#include <ns16550.h>
#include <twl4030.h>
#include "sniper.h"
@@ -30,18 +28,6 @@
.nand_string = "MMC"
};
-static const struct ns16550_plat serial_omap_plat = {
- .base = OMAP34XX_UART3,
- .reg_shift = 2,
- .clock = V_NS16550_CLK,
- .fcr = UART_FCR_DEFVAL,
-};
-
-U_BOOT_DRVINFO(sniper_serial) = {
- .name = "ns16550_serial",
- .plat = &serial_omap_plat
-};
-
#if defined(CONFIG_USB_MUSB_HOST) || defined(CONFIG_USB_MUSB_GADGET)
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
@@ -77,6 +63,11 @@
timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
timings->mr = MICRON_V_MR_165;
}
+
+void spl_board_init(void)
+{
+ twl4030_power_mmc_init(1);
+}
#endif
int board_init(void)
@@ -188,13 +179,3 @@
return omap_reboot_mode_store("b");
}
-
-int board_mmc_init(struct bd_info *bis)
-{
- return omap_mmc_init(1, 0, 0, -1, -1);
-}
-
-void board_mmc_power_init(void)
-{
- twl4030_power_mmc_init(1);
-}
diff --git a/board/radxa/rock-5-itx-rk3588/Kconfig b/board/radxa/rock-5-itx-rk3588/Kconfig
new file mode 100644
index 0000000..f7a7666
--- /dev/null
+++ b/board/radxa/rock-5-itx-rk3588/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_ROCK_5_ITX_RK3588
+
+config SYS_BOARD
+ default "rock-5-itx-rk3588"
+
+config SYS_VENDOR
+ default "radxa"
+
+config SYS_CONFIG_NAME
+ default "rock-5-itx-rk3588"
+
+endif
diff --git a/board/radxa/rock-5-itx-rk3588/MAINTAINERS b/board/radxa/rock-5-itx-rk3588/MAINTAINERS
new file mode 100644
index 0000000..1c4f243
--- /dev/null
+++ b/board/radxa/rock-5-itx-rk3588/MAINTAINERS
@@ -0,0 +1,8 @@
+ROCK-5-ITX-RK3588
+M: Heiko Stuebner <heiko@sntech.de>
+R: Jonas Karlman <jonas@kwiboo.se>
+S: Maintained
+F: board/radxa/rock-5-itx-rk3588
+F: include/configs/rock-5-itx-rk3588.h
+F: configs/rock-5-itx-rk3588_defconfig
+F: arch/arm/dts/rk3588-rock-5-itx-u-boot.dtsi
diff --git a/board/radxa/zero3-rk3566/Kconfig b/board/radxa/zero3-rk3566/Kconfig
new file mode 100644
index 0000000..7d46efc
--- /dev/null
+++ b/board/radxa/zero3-rk3566/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_RADXA_ZERO_3_RK3566
+
+config SYS_BOARD
+ default "zero3-rk3566"
+
+config SYS_VENDOR
+ default "radxa"
+
+config SYS_CONFIG_NAME
+ default "evb_rk3568"
+
+endif
diff --git a/board/radxa/zero3-rk3566/MAINTAINERS b/board/radxa/zero3-rk3566/MAINTAINERS
new file mode 100644
index 0000000..e5a5d85
--- /dev/null
+++ b/board/radxa/zero3-rk3566/MAINTAINERS
@@ -0,0 +1,6 @@
+RADXA-ZERO-3-RK3566
+M: Jonas Karlman <jonas@kwiboo.se>
+S: Maintained
+F: board/radxa/zero3-rk3566
+F: configs/radxa-zero-3-rk3566_defconfig
+F: arch/arm/dts/rk3566-radxa-zero-3*
diff --git a/board/radxa/zero3-rk3566/Makefile b/board/radxa/zero3-rk3566/Makefile
new file mode 100644
index 0000000..b28b58e
--- /dev/null
+++ b/board/radxa/zero3-rk3566/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += zero3-rk3566.o
diff --git a/board/radxa/zero3-rk3566/zero3-rk3566.c b/board/radxa/zero3-rk3566/zero3-rk3566.c
new file mode 100644
index 0000000..cf30c4e
--- /dev/null
+++ b/board/radxa/zero3-rk3566/zero3-rk3566.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <adc.h>
+#include <env.h>
+
+#define HW_ID_CHANNEL 1
+
+struct board_model {
+ unsigned int low;
+ unsigned int high;
+ const char *fdtfile;
+};
+
+static const struct board_model board_models[] = {
+ { 230, 270, "rockchip/rk3566-radxa-zero-3w.dtb" },
+ { 400, 450, "rockchip/rk3566-radxa-zero-3e.dtb" },
+};
+
+static const struct board_model *get_board_model(void)
+{
+ unsigned int val;
+ int i, ret;
+
+ ret = adc_channel_single_shot("saradc@fe720000", HW_ID_CHANNEL, &val);
+ if (ret)
+ return NULL;
+
+ for (i = 0; i < ARRAY_SIZE(board_models); i++) {
+ unsigned int min = board_models[i].low;
+ unsigned int max = board_models[i].high;
+
+ if (min <= val && val <= max)
+ return &board_models[i];
+ }
+
+ return NULL;
+}
+
+int rk_board_late_init(void)
+{
+ const struct board_model *model = get_board_model();
+
+ if (model)
+ env_set("fdtfile", model->fdtfile);
+
+ return 0;
+}
+
+int board_fit_config_name_match(const char *name)
+{
+ const struct board_model *model = get_board_model();
+
+ if (model && !strcmp(name, model->fdtfile))
+ return 0;
+
+ return -EINVAL;
+}
diff --git a/board/rockchip/evb_rk3308/MAINTAINERS b/board/rockchip/evb_rk3308/MAINTAINERS
index abffbb1..cd219c6 100644
--- a/board/rockchip/evb_rk3308/MAINTAINERS
+++ b/board/rockchip/evb_rk3308/MAINTAINERS
@@ -12,3 +12,9 @@
S: Maintained
F: configs/rock-pi-s-rk3308_defconfig
F: arch/arm/dts/rk3308-rock-pi-s*
+
+ROCK-S0
+M: Jonas Karlman <jonas@kwiboo.se>
+S: Maintained
+F: configs/rock-s0-rk3308_defconfig
+F: arch/arm/dts/rk3308-rock-s0*
diff --git a/board/rockchip/evb_rk3568/MAINTAINERS b/board/rockchip/evb_rk3568/MAINTAINERS
index e5b0986..588134e 100644
--- a/board/rockchip/evb_rk3568/MAINTAINERS
+++ b/board/rockchip/evb_rk3568/MAINTAINERS
@@ -69,3 +69,16 @@
F: configs/rock-3a-rk3568_defconfig
F: arch/arm/dts/rk3568-rock-3a.dts
F: arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
+
+ROCK-3B
+M: Jonas Karlman <jonas@kwiboo.se>
+S: Maintained
+F: configs/rock-3b-rk3568_defconfig
+F: arch/arm/dts/rk3568-rock-3b*
+
+ROCK-3C
+M: Jonas Karlman <jonas@kwiboo.se>
+M: Maxim Moskalets <maximmosk4@gmail.com>
+S: Maintained
+F: arch/arm/dts/rk3566-rock-3c-u-boot.dtsi
+F: configs/rock-3c-rk3566_defconfig
diff --git a/board/softing/vining_2000/vining_2000.c b/board/softing/vining_2000/vining_2000.c
index a0dbf97..bd430cf 100644
--- a/board/softing/vining_2000/vining_2000.c
+++ b/board/softing/vining_2000/vining_2000.c
@@ -18,7 +18,6 @@
#include <asm/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/io.h>
-#include <asm/mach-imx/mxc_i2c.h>
#include <asm/sections.h>
#include <env.h>
#include <linux/bitops.h>
@@ -27,7 +26,6 @@
#include <config.h>
#include <fsl_esdhc_imx.h>
#include <mmc.h>
-#include <i2c.h>
#include <miiphy.h>
#include <netdev.h>
#include <power/pmic.h>
@@ -53,10 +51,6 @@
PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_HIGH | \
PAD_CTL_SRE_FAST)
-#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \
- PAD_CTL_PKE | PAD_CTL_ODE | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm)
-
#define USDHC_CLK_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST)
@@ -120,21 +114,6 @@
return ret;
}
-#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
-/* I2C1 for PMIC */
-static struct i2c_pads_info i2c_pad_info1 = {
- .scl = {
- .i2c_mode = MX6_PAD_GPIO1_IO00__I2C1_SCL | PC,
- .gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO_0 | PC,
- .gp = IMX_GPIO_NR(1, 0),
- },
- .sda = {
- .i2c_mode = MX6_PAD_GPIO1_IO01__I2C1_SDA | PC,
- .gpio_mode = MX6_PAD_GPIO1_IO01__GPIO1_IO_1 | PC,
- .gp = IMX_GPIO_NR(1, 1),
- },
-};
-
static struct pmic *pfuze_init(unsigned char i2cbus)
{
struct pmic *p;
@@ -400,10 +379,6 @@
/* Address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-#ifdef CONFIG_SYS_I2C_MXC
- setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-#endif
-
return board_net_init();
}
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 4bcd9b9..4ad77c7 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -549,6 +549,12 @@
F: configs/Sunchip_CX-A99_defconfig
W: https://linux-sunxi.org/Sunchip_CX-A99
+TANIX TX1 BOARD
+M: Andre Przywara <andre.przywara@arm.com>
+S: Maintained
+F: configs/tanix_tx1_defconfig
+W: https://linux-sunxi.org/Tanix_TX1
+
TANIX TX6 BOARD
M: Jernej Skrabec <jernej.skrabec@siol.net>
S: Maintained
diff --git a/board/tcl/sl50/board.c b/board/tcl/sl50/board.c
index 484b4e2..6c60c70 100644
--- a/board/tcl/sl50/board.c
+++ b/board/tcl/sl50/board.c
@@ -92,7 +92,7 @@
const struct dpll_params dpll_ddr_sl50 = {
400, OSC-1, 1, -1, -1, -1, -1};
-void am33xx_spl_board_init(void)
+void spl_board_init(void)
{
int mpu_vdd;
diff --git a/board/tq/tqma6/Kconfig b/board/tq/tqma6/Kconfig
index e7f2336..b42c8e2 100644
--- a/board/tq/tqma6/Kconfig
+++ b/board/tq/tqma6/Kconfig
@@ -72,6 +72,7 @@
select PHY_MICREL
select PHY_MICREL_KSZ90X1
select MXC_UART
+ imply OF_UPSTREAM
help
Select the MBa6 starterkit. This features a GigE Phy, USB, SD-Card
etc.
diff --git a/board/tq/tqma6/tqma6.c b/board/tq/tqma6/tqma6.c
index 92142c1..445ce98 100644
--- a/board/tq/tqma6/tqma6.c
+++ b/board/tq/tqma6/tqma6.c
@@ -19,11 +19,9 @@
#include <linux/errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
-#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/spi.h>
#include <fsl_esdhc_imx.h>
#include <linux/libfdt.h>
-#include <i2c.h>
#include <mmc.h>
#include <power/pfuze100_pmic.h>
#include <power/pmic.h>
@@ -48,10 +46,6 @@
#define SPI_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_80ohm | PAD_CTL_HYS | \
- PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
@@ -170,38 +164,6 @@
#endif
#endif
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
-static struct i2c_pads_info tqma6_i2c3_pads = {
- /* I2C3: on board LM75, M24C64, */
- .scl = {
- .i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__I2C3_SCL,
- I2C_PAD_CTRL),
- .gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__GPIO1_IO05,
- I2C_PAD_CTRL),
- .gp = IMX_GPIO_NR(1, 5)
- },
- .sda = {
- .i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__I2C3_SDA,
- I2C_PAD_CTRL),
- .gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__GPIO1_IO06,
- I2C_PAD_CTRL),
- .gp = IMX_GPIO_NR(1, 6)
- }
-};
-
-static void tqma6_setup_i2c(void)
-{
- int ret;
- /*
- * use logical index for bus, e.g. I2C1 -> 0
- * warn on error
- */
- ret = setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &tqma6_i2c3_pads);
- if (ret)
- printf("setup I2C3 failed: %d\n", ret);
-}
-#endif
-
int board_early_init_f(void)
{
return tqma6_bb_board_early_init_f();
@@ -215,10 +177,6 @@
#ifndef CONFIG_DM_SPI
tqma6_iomuxc_spi();
#endif
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
- tqma6_setup_i2c();
-#endif
-
tqma6_bb_board_init();
return 0;
@@ -246,21 +204,22 @@
};
}
-#if CONFIG_IS_ENABLED(POWER_LEGACY)
+#if CONFIG_IS_ENABLED(DM_PMIC)
/* setup board specific PMIC */
int power_init_board(void)
{
- struct pmic *p;
+ struct udevice *dev;
u32 reg, rev;
+ int ret;
- power_pfuze100_init(TQMA6_PFUZE100_I2C_BUS);
- p = pmic_get("PFUZE100");
- if (p && !pmic_probe(p)) {
- pmic_reg_read(p, PFUZE100_DEVICEID, ®);
- pmic_reg_read(p, PFUZE100_REVID, &rev);
- printf("PMIC: PFUZE100 ID=0x%02x REV=0x%02x\n", reg, rev);
- }
+ ret = pmic_get("pmic@8", &dev);
+ if (ret < 0)
+ return 0;
+ reg = pmic_reg_read(dev, PFUZE100_DEVICEID);
+ rev = pmic_reg_read(dev, PFUZE100_REVID);
+
+ printf("PMIC: PFUZE100 ID=0x%02x REV=0x%02x\n", reg, rev);
return 0;
}
#endif
@@ -271,11 +230,6 @@
tqma6_bb_board_late_init();
- return 0;
-}
-
-int checkboard(void)
-{
printf("Board: %s on a %s\n", tqma6_get_boardname(),
tqma6_bb_get_boardname());
return 0;
diff --git a/board/vscom/baltos/board.c b/board/vscom/baltos/board.c
index cea25f8..f54f183 100644
--- a/board/vscom/baltos/board.c
+++ b/board/vscom/baltos/board.c
@@ -177,7 +177,7 @@
const struct dpll_params dpll_ddr_baltos = {
400, OSC-1, 1, -1, -1, -1, -1};
-void am33xx_spl_board_init(void)
+void spl_board_init(void)
{
int sil_rev, mpu_vdd;
int freq;
diff --git a/board/xilinx/versal-net/board.c b/board/xilinx/versal-net/board.c
index 88e10fa..1d67e3f 100644
--- a/board/xilinx/versal-net/board.c
+++ b/board/xilinx/versal-net/board.c
@@ -193,6 +193,51 @@
return bootmode;
}
+int spi_get_env_dev(void)
+{
+ struct udevice *dev;
+ const char *mode = NULL;
+ int bootseq = -1;
+
+ switch (versal_net_get_bootmode()) {
+ case QSPI_MODE_24BIT:
+ puts("QSPI_MODE_24\n");
+ if (uclass_get_device_by_name(UCLASS_SPI,
+ "spi@f1030000", &dev)) {
+ debug("QSPI driver for QSPI device is not present\n");
+ break;
+ }
+ mode = "xspi";
+ bootseq = dev_seq(dev);
+ break;
+ case QSPI_MODE_32BIT:
+ puts("QSPI_MODE_32\n");
+ if (uclass_get_device_by_name(UCLASS_SPI,
+ "spi@f1030000", &dev)) {
+ debug("QSPI driver for QSPI device is not present\n");
+ break;
+ }
+ mode = "xspi";
+ bootseq = dev_seq(dev);
+ break;
+ case OSPI_MODE:
+ puts("OSPI_MODE\n");
+ if (uclass_get_device_by_name(UCLASS_SPI,
+ "spi@f1010000", &dev)) {
+ debug("OSPI driver for OSPI device is not present\n");
+ break;
+ }
+ mode = "xspi";
+ bootseq = dev_seq(dev);
+ break;
+ default:
+ break;
+ }
+
+ debug("bootseq %d\n", bootseq);
+ return bootseq;
+}
+
static int boot_targets_setup(void)
{
u8 bootmode;
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index b4c15b0..e6331c0 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -152,20 +152,7 @@
if (sizeof(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE) > 1)
zynqmp_pmufw_load_config_object(zynqmp_pm_cfg_obj,
zynqmp_pm_cfg_obj_size);
-#endif
-
-#if defined(CONFIG_ZYNQMP_FIRMWARE)
- struct udevice *dev;
-
- uclass_get_device_by_name(UCLASS_FIRMWARE, "power-management", &dev);
- if (!dev) {
- uclass_get_device_by_name(UCLASS_FIRMWARE, "zynqmp-power", &dev);
- if (!dev)
- panic("PMU Firmware device not found - Enable it");
- }
-#endif
-#if defined(CONFIG_SPL_BUILD)
printf("Silicon version:\t%d\n", zynqmp_get_silicon_version());
/* the CSU disables the JTAG interface when secure boot is enabled */
diff --git a/board/xilinx/zynqmp/zynqmp_kria.env b/board/xilinx/zynqmp/zynqmp_kria.env
index 69e333c..49ef3e7 100644
--- a/board/xilinx/zynqmp/zynqmp_kria.env
+++ b/board/xilinx/zynqmp/zynqmp_kria.env
@@ -63,10 +63,13 @@
kd240_setup=i2c dev 1 && run usb_hub_init;zynqmp pmufw node 33; zynqmp pmufw node 47
tpm_setup=tpm autostart;
+tpm_reset=echo "!!! For TPM reset a full power cycle or pressing the POR_B button is required !!!";
+tpm_kv260=if test ${card1_rev} = A -o ${card1_rev} = B -o ${card1_rev} = Y -o ${card1_rev} = Z -o ${card1_rev} = 1; then run tpm_reset; fi
+tpm_kd240=if test ${card1_rev} = A; then run tpm_reset; fi
board_setup=\
zynqmp mmio_write 0xFFCA0010 0xfff 0; \
-if test ${card1_name} = SCK-KV-G; then run kv260_setup; fi;\
-if test ${card1_name} = SCK-KR-G; then run kr260_setup; fi;\
-if test ${card1_name} = SCK-KD-G; then run kd240_setup; fi;\
+if test ${card1_name} = SCK-KV-G; then run kv260_setup; run tpm_kv260; fi;\
+if test ${card1_name} = SCK-KR-G; then run kr260_setup; run tpm_reset; fi;\
+if test ${card1_name} = SCK-KD-G; then run kd240_setup; run tpm_kd240; fi;\
run tpm_setup
diff --git a/board/xunlong/orangepi-3b-rk3566/Kconfig b/board/xunlong/orangepi-3b-rk3566/Kconfig
new file mode 100644
index 0000000..36ccc05
--- /dev/null
+++ b/board/xunlong/orangepi-3b-rk3566/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_ORANGEPI_3B_RK3566
+
+config SYS_BOARD
+ default "orangepi-3b-rk3566"
+
+config SYS_VENDOR
+ default "xunlong"
+
+config SYS_CONFIG_NAME
+ default "evb_rk3568"
+
+endif
diff --git a/board/xunlong/orangepi-3b-rk3566/MAINTAINERS b/board/xunlong/orangepi-3b-rk3566/MAINTAINERS
new file mode 100644
index 0000000..6e1df10
--- /dev/null
+++ b/board/xunlong/orangepi-3b-rk3566/MAINTAINERS
@@ -0,0 +1,6 @@
+ORANGEPI-3B-RK3566
+M: Jonas Karlman <jonas@kwiboo.se>
+S: Maintained
+F: board/xunlong/orangepi-3b-rk3566
+F: configs/orangepi-3b-rk3566_defconfig
+F: arch/arm/dts/rk3566-orangepi-3b*
diff --git a/board/xunlong/orangepi-3b-rk3566/Makefile b/board/xunlong/orangepi-3b-rk3566/Makefile
new file mode 100644
index 0000000..9ce2554
--- /dev/null
+++ b/board/xunlong/orangepi-3b-rk3566/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += orangepi-3b-rk3566.o
diff --git a/board/xunlong/orangepi-3b-rk3566/orangepi-3b-rk3566.c b/board/xunlong/orangepi-3b-rk3566/orangepi-3b-rk3566.c
new file mode 100644
index 0000000..d05c33a
--- /dev/null
+++ b/board/xunlong/orangepi-3b-rk3566/orangepi-3b-rk3566.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <env.h>
+#include <asm/gpio.h>
+
+struct board_model {
+ int value;
+ const char *fdtfile;
+ const char *config;
+};
+
+static const struct board_model board_models[] = {
+ { 0, "rockchip/rk3566-orangepi-3b-v1.1.dtb", "rk3566-orangepi-3b-v1.1.dtb" },
+ { 1, "rockchip/rk3566-orangepi-3b-v2.1.dtb", "rk3566-orangepi-3b-v2.1.dtb" },
+};
+
+static int get_board_value(void)
+{
+ struct gpio_desc desc;
+ int ret;
+
+ /*
+ * GPIO4_C4 (E20):
+ * v1.1.1: x (internal pull-down)
+ * v2.1: PHY_RESET (external pull-up)
+ */
+ ret = dm_gpio_lookup_name("E20", &desc);
+ if (ret)
+ return ret;
+
+ ret = dm_gpio_request(&desc, "phy_reset");
+ if (ret && ret != -EBUSY)
+ return ret;
+
+ dm_gpio_set_dir_flags(&desc, GPIOD_IS_IN);
+ ret = dm_gpio_get_value(&desc);
+ dm_gpio_free(desc.dev, &desc);
+
+ return ret;
+}
+
+static const struct board_model *get_board_model(void)
+{
+ int i, val;
+
+ val = get_board_value();
+ if (val < 0)
+ return NULL;
+
+ for (i = 0; i < ARRAY_SIZE(board_models); i++) {
+ if (val == board_models[i].value)
+ return &board_models[i];
+ }
+
+ return NULL;
+}
+
+int rk_board_late_init(void)
+{
+ const struct board_model *model = get_board_model();
+
+ if (model)
+ env_set("fdtfile", model->fdtfile);
+
+ return 0;
+}
+
+int board_fit_config_name_match(const char *name)
+{
+ const struct board_model *model = get_board_model();
+
+ if (model && (!strcmp(name, model->fdtfile) ||
+ !strcmp(name, model->config)))
+ return 0;
+
+ return -EINVAL;
+}
diff --git a/boot/Kconfig b/boot/Kconfig
index 940389d..7ac3457 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -745,6 +745,76 @@
This provides a way to try out standard boot on an existing boot flow.
It is not enabled by default to save space.
+config UPL
+ bool "upl - Universal Payload Specification"
+ imply CMD_UPL
+ imply UPL_READ
+ imply UPL_WRITE
+ imply SPL_UPL if SPL
+ help
+ Provides support for UPL payloads and handoff information. U-Boot
+ supports generating and accepting handoff information. The mkimage
+ tool will eventually support creating payloads.
+
+if UPL
+
+config UPL_READ
+ bool "upl - Support reading a Universal Payload handoff"
+ help
+ Provides support for decoding a UPL-format payload into a C structure
+ which can be used elsewhere in U-Boot. This is just the reading
+ implementation, useful for trying it out. See UPL_IN for how
+ to tell U-Boot to actually read it on startup and use it for memory
+ and device information, etc.
+
+config UPL_WRITE
+ bool "upl - Support writing a Universal Payload handoff"
+ help
+ Provides support for encoding a UPL-format payload from a C structure
+ so it can be passed to another program. This is just the writing
+ implementation, useful for trying it out. See SPL_UPL_OUT
+ for how to tell U-Boot SPL to actually write it before jumping to
+ the next phase.
+
+config UPL_IN
+ bool "upl - Read the UPL handoff on startup"
+ select UPL_READ
+ help
+ Read an SPL handoff when U-Boot starts and use it to provide
+ devices, memory layout, etc. required by U-Boot. This allows U-Boot
+ to function as a payload in the meaning of the specification.
+
+if SPL
+
+config SPL_UPL
+ bool "Write a UPL handoff in SPL"
+ imply SPL_UPL_OUT
+ help
+ This tells SPL to write a UPL handoff and pass it to the next phase
+ (e.g. to U-Boot or another program which SPL loads and runs). THis
+ provides information to help that program run correctly and
+ efficiently on the machine.
+
+config SPL_UPL_WRITE
+ bool # upl - Support writing a Universal Payload handoff in SPL
+ select SPL_BLOBLIST
+ help
+ Provides support for encoding a UPL-format payload from a C structure
+ so it can be passed to another program. This is just the writing
+ implementation, useful for trying it out.
+
+config SPL_UPL_OUT
+ bool "upl - Support writing a Universal Payload handoff in SPL"
+ select SPL_UPL_WRITE
+ help
+ Provides support for encoding a UPL-format payload and passing it to
+ the next firmware phase. This allows U-Boot SPL to function as
+ Platform Init in the meaning of the specification.
+
+endif # SPL
+
+endif # UPL
+
endif # BOOTSTD
config LEGACY_IMAGE_FORMAT
diff --git a/boot/Makefile b/boot/Makefile
index dff6f99..f4675d6 100644
--- a/boot/Makefile
+++ b/boot/Makefile
@@ -43,6 +43,10 @@
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
obj-$(CONFIG_$(SPL_TPL_)FDT_SIMPLEFB) += fdt_simplefb.o
+obj-$(CONFIG_$(SPL_TPL_)UPL) += upl_common.o
+obj-$(CONFIG_$(SPL_TPL_)UPL_READ) += upl_read.o
+obj-$(CONFIG_$(SPL_TPL_)UPL_WRITE) += upl_write.o
+
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o
obj-$(CONFIG_$(SPL_TPL_)FIT_SIGNATURE) += fdt_region.o
obj-$(CONFIG_$(SPL_TPL_)FIT) += image-fit.o
diff --git a/boot/bootmeth_efi.c b/boot/bootmeth_efi.c
index 39232eb..6b41c09 100644
--- a/boot/bootmeth_efi.c
+++ b/boot/bootmeth_efi.c
@@ -100,11 +100,10 @@
if (last_slash)
*last_slash = '\0';
- log_debug("setting bootdev %s, %s, %s, %p, %x\n",
- dev_get_uclass_name(media_dev), devnum_str, bflow->fname,
- bflow->buf, size);
dev_name = device_get_uclass_id(media_dev) == UCLASS_MASS_STORAGE ?
- "usb" : dev_get_uclass_name(media_dev);
+ "usb" : blk_get_uclass_name(device_get_uclass_id(media_dev));
+ log_debug("setting bootdev %s, %s, %s, %p, %x\n",
+ dev_name, devnum_str, bflow->fname, bflow->buf, size);
efi_set_bootdev(dev_name, devnum_str, bflow->fname, bflow->buf, size);
}
diff --git a/boot/image-fit.c b/boot/image-fit.c
index 9253f81..7d56f0b 100644
--- a/boot/image-fit.c
+++ b/boot/image-fit.c
@@ -36,6 +36,7 @@
#include <bootm.h>
#include <image.h>
#include <bootstage.h>
+#include <upl.h>
#include <u-boot/crc.h>
/*****************************************************************************/
@@ -2294,6 +2295,8 @@
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_LOAD);
+ upl_add_image(fit, noffset, load, len);
+
*datap = load;
*lenp = len;
if (fit_unamep)
diff --git a/boot/upl_common.c b/boot/upl_common.c
new file mode 100644
index 0000000..3924423
--- /dev/null
+++ b/boot/upl_common.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * UPL handoff command functions
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#define LOG_CATEGORY UCLASS_BOOTSTD
+
+#include <string.h>
+#include <upl.h>
+
+/* Names of bootmodes */
+const char *const bootmode_names[UPLBM_COUNT] = {
+ [UPLBM_FULL] = "full",
+ [UPLBM_MINIMAL] = "minimal",
+ [UPLBM_FAST] = "fast",
+ [UPLBM_DIAG] = "diag",
+ [UPLBM_DEFAULT] = "default",
+ [UPLBM_S2] = "s2",
+ [UPLBM_S3] = "s3",
+ [UPLBM_S4] = "s4",
+ [UPLBM_S5] = "s5",
+ [UPLBM_FACTORY] = "factory",
+ [UPLBM_FLASH] = "flash",
+ [UPLBM_RECOVERY] = "recovery",
+};
+
+/* Names of memory usages */
+const char *const usage_names[UPLUS_COUNT] = {
+ [UPLUS_ACPI_RECLAIM] = "acpi-reclaim",
+ [UPLUS_ACPI_NVS] = "acpi-nvs",
+ [UPLUS_BOOT_CODE] = "boot-code",
+ [UPLUS_BOOT_DATA] = "boot-data",
+ [UPLUS_RUNTIME_CODE] = "runtime-code",
+ [UPLUS_RUNTIME_DATA] = "runtime-data",
+};
+
+/* Names of access types */
+const char *const access_types[UPLUS_COUNT] = {
+ [UPLAT_MMIO] = "mmio",
+ [UPLAT_IO] = "io",
+};
+
+/* Names of graphics formats */
+const char *const graphics_formats[UPLUS_COUNT] = {
+ [UPLGF_ARGB32] = "a8r8g8b8",
+ [UPLGF_ABGR32] = "a8b8g8r8",
+ [UPLGF_ABGR64] = "a16b16g16r16",
+};
+
+void upl_init(struct upl *upl)
+{
+ memset(upl, '\0', sizeof(struct upl));
+ alist_init_struct(&upl->image, struct upl_image);
+ alist_init_struct(&upl->mem, struct upl_mem);
+ alist_init_struct(&upl->memmap, struct upl_memmap);
+ alist_init_struct(&upl->memres, struct upl_memres);
+}
diff --git a/boot/upl_common.h b/boot/upl_common.h
new file mode 100644
index 0000000..cc517dc
--- /dev/null
+++ b/boot/upl_common.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * UPL handoff command functions
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#ifndef __UPL_COMMON_H
+#define __UPL_COMMON_H
+
+/* Names of bootmodes */
+extern const char *const bootmode_names[UPLBM_COUNT];
+
+/* Names of memory usages */
+extern const char *const usage_names[UPLUS_COUNT];
+
+/* Names of access types */
+extern const char *const access_types[UPLUS_COUNT];
+
+/* Names of graphics formats */
+extern const char *const graphics_formats[UPLUS_COUNT];
+
+#endif /* __UPL_COMMON_H */
diff --git a/boot/upl_read.c b/boot/upl_read.c
new file mode 100644
index 0000000..5063897
--- /dev/null
+++ b/boot/upl_read.c
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * UPL handoff parsing
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#define LOG_CATEGORY UCLASS_BOOTSTD
+
+#include <log.h>
+#include <upl.h>
+#include <dm/ofnode.h>
+#include "upl_common.h"
+
+/**
+ * read_addr() - Read an address
+ *
+ * Reads an address in the correct format, either 32- or 64-bit
+ *
+ * @upl: UPL state
+ * @node: Node to read from
+ * @prop: Property name to read
+ * @addr: Place to put the address
+ * Return: 0 if OK, -ve on error
+ */
+static int read_addr(const struct upl *upl, ofnode node, const char *prop,
+ ulong *addrp)
+{
+ int ret;
+
+ if (upl->addr_cells == 1) {
+ u32 val;
+
+ ret = ofnode_read_u32(node, prop, &val);
+ if (!ret)
+ *addrp = val;
+ } else {
+ u64 val;
+
+ ret = ofnode_read_u64(node, prop, &val);
+ if (!ret)
+ *addrp = val;
+ }
+
+ return ret;
+}
+
+/**
+ * read_size() - Read a size
+ *
+ * Reads a size in the correct format, either 32- or 64-bit
+ *
+ * @upl: UPL state
+ * @node: Node to read from
+ * @prop: Property name to read
+ * @addr: Place to put the size
+ * Return: 0 if OK, -ve on error
+ */
+static int read_size(const struct upl *upl, ofnode node, const char *prop,
+ ulong *sizep)
+{
+ int ret;
+
+ if (upl->size_cells == 1) {
+ u32 val;
+
+ ret = ofnode_read_u32(node, prop, &val);
+ if (!ret)
+ *sizep = val;
+ } else {
+ u64 val;
+
+ ret = ofnode_read_u64(node, prop, &val);
+ if (!ret)
+ *sizep = val;
+ }
+
+ return ret;
+}
+
+/**
+ * ofnode_read_bitmask() - Read a bit mask from a string list
+ *
+ * @node: Node to read from
+ * @prop: Property name to read
+ * @names: Array of names for each bit
+ * @count: Number of array entries
+ * @value: Returns resulting bit-mask value on success
+ * Return: 0 if OK, -EINVAL if a bit number is not defined, -ENOSPC if the
+ * string is too long for the (internal) buffer, -EINVAL if no such property
+ */
+static int ofnode_read_bitmask(ofnode node, const char *prop,
+ const char *const names[], uint count,
+ uint *valuep)
+{
+ const char **list;
+ const char **strp;
+ uint val;
+ uint bit;
+ int ret;
+
+ ret = ofnode_read_string_list(node, prop, &list);
+ if (ret < 0)
+ return log_msg_ret("rea", ret);
+
+ val = 0;
+ for (strp = list; *strp; strp++) {
+ const char *str = *strp;
+ bool found = false;
+
+ for (bit = 0; bit < count; bit++) {
+ if (!strcmp(str, names[bit])) {
+ found = true;
+ break;
+ }
+ }
+ if (found)
+ val |= BIT(bit);
+ else
+ log_warning("%s/%s: Invalid value '%s'\n",
+ ofnode_get_name(node), prop, str);
+ }
+ *valuep = val;
+
+ return 0;
+}
+
+/**
+ * ofnode_read_value() - Read a string value as an int using a lookup
+ *
+ * @node: Node to read from
+ * @prop: Property name to read
+ * @names: Array of names for each int value
+ * @count: Number of array entries
+ * @valuep: Returns int value read
+ * Return: 0 if OK, -EINVAL if a bit number is not defined, -ENOENT if the
+ * property does not exist
+ */
+static int ofnode_read_value(ofnode node, const char *prop,
+ const char *const names[], uint count,
+ uint *valuep)
+{
+ const char *str;
+ int i;
+
+ str = ofnode_read_string(node, prop);
+ if (!str)
+ return log_msg_ret("rd", -ENOENT);
+
+ for (i = 0; i < count; i++) {
+ if (!strcmp(names[i], str)) {
+ *valuep = i;
+ return 0;
+ }
+ }
+
+ log_debug("Unnamed value '%s'\n", str);
+ return log_msg_ret("val", -EINVAL);
+}
+
+static int read_uint(ofnode node, const char *prop, uint *valp)
+{
+ u32 val;
+ int ret;
+
+ ret = ofnode_read_u32(node, prop, &val);
+ if (ret)
+ return ret;
+ *valp = val;
+
+ return 0;
+}
+
+/**
+ * decode_root_props() - Decode root properties from the tree
+ *
+ * @upl: UPL state
+ * @node: Node to decode
+ * Return 0 if OK, -ve on error
+ */
+static int decode_root_props(struct upl *upl, ofnode node)
+{
+ int ret;
+
+ ret = read_uint(node, UPLP_ADDRESS_CELLS, &upl->addr_cells);
+ if (!ret)
+ ret = read_uint(node, UPLP_SIZE_CELLS, &upl->size_cells);
+ if (ret)
+ return log_msg_ret("cel", ret);
+
+ return 0;
+}
+
+/**
+ * decode_root_props() - Decode UPL parameters from the tree
+ *
+ * @upl: UPL state
+ * @node: Node to decode
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_params(struct upl *upl, ofnode options)
+{
+ ofnode node;
+ int ret;
+
+ node = ofnode_find_subnode(options, UPLN_UPL_PARAMS);
+ if (!ofnode_valid(node))
+ return log_msg_ret("par", -EINVAL);
+ log_debug("decoding '%s'\n", ofnode_get_name(node));
+
+ ret = read_addr(upl, node, UPLP_SMBIOS, &upl->smbios);
+ if (ret)
+ return log_msg_ret("smb", ret);
+ ret = read_addr(upl, node, UPLP_ACPI, &upl->acpi);
+ if (ret)
+ return log_msg_ret("acp", ret);
+ ret = ofnode_read_bitmask(node, UPLP_BOOTMODE, bootmode_names,
+ UPLBM_COUNT, &upl->bootmode);
+ if (ret)
+ return log_msg_ret("boo", ret);
+ ret = read_uint(node, UPLP_ADDR_WIDTH, &upl->addr_width);
+ if (ret)
+ return log_msg_ret("add", ret);
+ ret = read_uint(node, UPLP_ACPI_NVS_SIZE, &upl->acpi_nvs_size);
+ if (ret)
+ return log_msg_ret("nvs", ret);
+
+ return 0;
+}
+
+/**
+ * decode_upl_images() - Decode /options/upl-image nodes
+ *
+ * @node: /options node in which to look for the node
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_images(struct upl *upl, ofnode options)
+{
+ ofnode node, images;
+ int ret;
+
+ images = ofnode_find_subnode(options, UPLN_UPL_IMAGE);
+ if (!ofnode_valid(images))
+ return log_msg_ret("img", -EINVAL);
+ log_debug("decoding '%s'\n", ofnode_get_name(images));
+
+ ret = read_addr(upl, images, UPLP_FIT, &upl->fit);
+ if (!ret)
+ ret = read_uint(images, UPLP_CONF_OFFSET, &upl->conf_offset);
+ if (ret)
+ return log_msg_ret("cnf", ret);
+
+ ofnode_for_each_subnode(node, images) {
+ struct upl_image img;
+
+ ret = read_addr(upl, node, UPLP_LOAD, &img.load);
+ if (!ret)
+ ret = read_size(upl, node, UPLP_SIZE, &img.size);
+ if (!ret)
+ ret = read_uint(node, UPLP_OFFSET, &img.offset);
+ img.description = ofnode_read_string(node, UPLP_DESCRIPTION);
+ if (!img.description)
+ return log_msg_ret("sim", ret);
+ if (!alist_add(&upl->image, img))
+ return log_msg_ret("img", -ENOMEM);
+ }
+
+ return 0;
+}
+
+/**
+ * decode_addr_size() - Decide a set of addr/size pairs
+ *
+ * Each base/size value from the devicetree is written to the region list
+ *
+ * @upl: UPL state
+ * @buf: Bytes to decode
+ * @size: Number of bytes to decode
+ * @regions: List of regions to process (struct memregion)
+ * Returns: number of regions found, if OK, else -ve on error
+ */
+static int decode_addr_size(const struct upl *upl, const char *buf, int size,
+ struct alist *regions)
+{
+ const char *ptr, *end = buf + size;
+ int i;
+
+ alist_init_struct(regions, struct memregion);
+ ptr = buf;
+ for (i = 0; ptr < end; i++) {
+ struct memregion reg;
+
+ if (upl->addr_cells == 1)
+ reg.base = fdt32_to_cpu(*(u32 *)ptr);
+ else
+ reg.base = fdt64_to_cpu(*(u64 *)ptr);
+ ptr += upl->addr_cells * sizeof(u32);
+
+ if (upl->size_cells == 1)
+ reg.size = fdt32_to_cpu(*(u32 *)ptr);
+ else
+ reg.size = fdt64_to_cpu(*(u64 *)ptr);
+ ptr += upl->size_cells * sizeof(u32);
+ if (ptr > end)
+ return -ENOSPC;
+
+ if (!alist_add(regions, reg))
+ return log_msg_ret("reg", -ENOMEM);
+ }
+
+ return i;
+}
+
+/**
+ * node_matches_at() - Check if a node name matches "base@..."
+ *
+ * Return: true if the node name matches the base string followed by an @ sign;
+ * false otherwise
+ */
+static bool node_matches_at(ofnode node, const char *base)
+{
+ const char *name = ofnode_get_name(node);
+ int len = strlen(base);
+
+ return !strncmp(base, name, len) && name[len] == '@';
+}
+
+/**
+ * decode_upl_memory_node() - Decode a /memory node from the tree
+ *
+ * @upl: UPL state
+ * @node: Node to decode
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_memory_node(struct upl *upl, ofnode node)
+{
+ struct upl_mem mem;
+ const char *buf;
+ int size, len;
+
+ buf = ofnode_read_prop(node, UPLP_REG, &size);
+ if (!buf) {
+ log_warning("Node '%s': Missing '%s' property\n",
+ ofnode_get_name(node), UPLP_REG);
+ return log_msg_ret("reg", -EINVAL);
+ }
+ len = decode_addr_size(upl, buf, size, &mem.region);
+ if (len < 0)
+ return log_msg_ret("buf", len);
+ mem.hotpluggable = ofnode_read_bool(node, UPLP_HOTPLUGGABLE);
+ if (!alist_add(&upl->mem, mem))
+ return log_msg_ret("mem", -ENOMEM);
+
+ return 0;
+}
+
+/**
+ * decode_upl_memmap() - Decode memory-map nodes from the tree
+ *
+ * @upl: UPL state
+ * @root: Parent node containing the /memory-map nodes
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_memmap(struct upl *upl, ofnode root)
+{
+ ofnode node;
+
+ ofnode_for_each_subnode(node, root) {
+ struct upl_memmap memmap;
+ int size, len, ret;
+ const char *buf;
+
+ memmap.name = ofnode_get_name(node);
+ memmap.usage = 0;
+
+ buf = ofnode_read_prop(node, UPLP_REG, &size);
+ if (!buf) {
+ log_warning("Node '%s': Missing '%s' property\n",
+ ofnode_get_name(node), UPLP_REG);
+ continue;
+ }
+
+ len = decode_addr_size(upl, buf, size, &memmap.region);
+ if (len < 0)
+ return log_msg_ret("buf", len);
+ ret = ofnode_read_bitmask(node, UPLP_USAGE, usage_names,
+ UPLUS_COUNT, &memmap.usage);
+ if (ret && ret != -EINVAL) /* optional property */
+ return log_msg_ret("bit", ret);
+
+ if (!alist_add(&upl->memmap, memmap))
+ return log_msg_ret("mmp", -ENOMEM);
+ }
+
+ return 0;
+}
+
+/**
+ * decode_upl_memres() - Decode reserved-memory nodes from the tree
+ *
+ * @upl: UPL state
+ * @root: Parent node containing the reserved-memory nodes
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_memres(struct upl *upl, ofnode root)
+{
+ ofnode node;
+
+ ofnode_for_each_subnode(node, root) {
+ struct upl_memres memres;
+ const char *buf;
+ int size, len;
+
+ log_debug("decoding '%s'\n", ofnode_get_name(node));
+ memres.name = ofnode_get_name(node);
+
+ buf = ofnode_read_prop(node, UPLP_REG, &size);
+ if (!buf) {
+ log_warning("Node '%s': Missing 'reg' property\n",
+ ofnode_get_name(node));
+ continue;
+ }
+
+ len = decode_addr_size(upl, buf, size, &memres.region);
+ if (len < 0)
+ return log_msg_ret("buf", len);
+ memres.no_map = ofnode_read_bool(node, UPLP_NO_MAP);
+
+ if (!alist_add(&upl->memres, memres))
+ return log_msg_ret("mre", -ENOMEM);
+ }
+
+ return 0;
+}
+
+/**
+ * decode_upl_serial() - Decode the serial node
+ *
+ * @upl: UPL state
+ * @root: Parent node contain node
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_serial(struct upl *upl, ofnode node)
+{
+ struct upl_serial *ser = &upl->serial;
+ const char *buf;
+ int len, size;
+ int ret;
+
+ ser->compatible = ofnode_read_string(node, UPLP_COMPATIBLE);
+ if (!ser->compatible) {
+ log_warning("Node '%s': Missing compatible string\n",
+ ofnode_get_name(node));
+ return log_msg_ret("com", -EINVAL);
+ }
+ ret = read_uint(node, UPLP_CLOCK_FREQUENCY, &ser->clock_frequency);
+ if (!ret)
+ ret = read_uint(node, UPLP_CURRENT_SPEED, &ser->current_speed);
+ if (ret)
+ return log_msg_ret("spe", ret);
+
+ buf = ofnode_read_prop(node, UPLP_REG, &size);
+ if (!buf) {
+ log_warning("Node '%s': Missing 'reg' property\n",
+ ofnode_get_name(node));
+ return log_msg_ret("reg", -EINVAL);
+ }
+
+ len = decode_addr_size(upl, buf, sizeof(buf), &ser->reg);
+ if (len < 0)
+ return log_msg_ret("buf", len);
+
+ /* set defaults */
+ ser->reg_io_shift = UPLD_REG_IO_SHIFT;
+ ser->reg_offset = UPLD_REG_OFFSET;
+ ser->reg_io_width = UPLD_REG_IO_WIDTH;
+ read_uint(node, UPLP_REG_IO_SHIFT, &ser->reg_io_shift);
+ read_uint(node, UPLP_REG_OFFSET, &ser->reg_offset);
+ read_uint(node, UPLP_REG_IO_WIDTH, &ser->reg_io_width);
+ read_addr(upl, node, UPLP_VIRTUAL_REG, &ser->virtual_reg);
+ ret = ofnode_read_value(node, UPLP_ACCESS_TYPE, access_types,
+ ARRAY_SIZE(access_types), &ser->access_type);
+ if (ret && ret != -ENOENT)
+ return log_msg_ret("ser", ret);
+
+ return 0;
+}
+
+/**
+ * decode_upl_graphics() - Decode graphics node
+ *
+ * @upl: UPL state
+ * @root: Node to decode
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_graphics(struct upl *upl, ofnode node)
+{
+ struct upl_graphics *gra = &upl->graphics;
+ const char *buf, *compat;
+ int len, size;
+ int ret;
+
+ compat = ofnode_read_string(node, UPLP_COMPATIBLE);
+ if (!compat) {
+ log_warning("Node '%s': Missing compatible string\n",
+ ofnode_get_name(node));
+ return log_msg_ret("com", -EINVAL);
+ }
+ if (strcmp(UPLC_GRAPHICS, compat)) {
+ log_warning("Node '%s': Ignoring compatible '%s'\n",
+ ofnode_get_name(node), compat);
+ return 0;
+ }
+
+ buf = ofnode_read_prop(node, UPLP_REG, &size);
+ if (!buf) {
+ log_warning("Node '%s': Missing 'reg' property\n",
+ ofnode_get_name(node));
+ return log_msg_ret("reg", -EINVAL);
+ }
+
+ len = decode_addr_size(upl, buf, sizeof(buf), &gra->reg);
+ if (len < 0)
+ return log_msg_ret("buf", len);
+
+ ret = read_uint(node, UPLP_WIDTH, &gra->width);
+ if (!ret)
+ ret = read_uint(node, UPLP_HEIGHT, &gra->height);
+ if (!ret)
+ ret = read_uint(node, UPLP_STRIDE, &gra->stride);
+ if (!ret) {
+ ret = ofnode_read_value(node, UPLP_GRAPHICS_FORMAT,
+ graphics_formats,
+ ARRAY_SIZE(graphics_formats),
+ &gra->format);
+ }
+ if (ret)
+ return log_msg_ret("pro", ret);
+
+ return 0;
+}
+
+int upl_read_handoff(struct upl *upl, oftree tree)
+{
+ ofnode root, node;
+ int ret;
+
+ if (!oftree_valid(tree))
+ return log_msg_ret("tre", -EINVAL);
+
+ root = oftree_root(tree);
+
+ upl_init(upl);
+ ret = decode_root_props(upl, root);
+ if (ret)
+ return log_msg_ret("roo", ret);
+
+ ofnode_for_each_subnode(node, root) {
+ const char *name = ofnode_get_name(node);
+
+ log_debug("decoding '%s'\n", name);
+ if (!strcmp(UPLN_OPTIONS, name)) {
+ ret = decode_upl_params(upl, node);
+ if (ret)
+ return log_msg_ret("opt", ret);
+
+ ret = decode_upl_images(upl, node);
+ } else if (node_matches_at(node, UPLN_MEMORY)) {
+ ret = decode_upl_memory_node(upl, node);
+ } else if (!strcmp(UPLN_MEMORY_MAP, name)) {
+ ret = decode_upl_memmap(upl, node);
+ } else if (!strcmp(UPLN_MEMORY_RESERVED, name)) {
+ ret = decode_upl_memres(upl, node);
+ } else if (node_matches_at(node, UPLN_SERIAL)) {
+ ret = decode_upl_serial(upl, node);
+ } else if (node_matches_at(node, UPLN_GRAPHICS)) {
+ ret = decode_upl_graphics(upl, node);
+ } else {
+ log_debug("Unknown node '%s'\n", name);
+ ret = 0;
+ }
+ if (ret)
+ return log_msg_ret("err", ret);
+ }
+
+ return 0;
+}
diff --git a/boot/upl_write.c b/boot/upl_write.c
new file mode 100644
index 0000000..7d637c15
--- /dev/null
+++ b/boot/upl_write.c
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * UPL handoff generation
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#define LOG_CATEGORY UCLASS_BOOTSTD
+
+#include <log.h>
+#include <upl.h>
+#include <dm/ofnode.h>
+#include "upl_common.h"
+
+/**
+ * write_addr() - Write an address
+ *
+ * Writes an address in the correct format, either 32- or 64-bit
+ *
+ * @upl: UPL state
+ * @node: Node to write to
+ * @prop: Property name to write
+ * @addr: Address to write
+ * Return: 0 if OK, -ve on error
+ */
+static int write_addr(const struct upl *upl, ofnode node, const char *prop,
+ ulong addr)
+{
+ int ret;
+
+ if (upl->addr_cells == 1)
+ ret = ofnode_write_u32(node, prop, addr);
+ else
+ ret = ofnode_write_u64(node, prop, addr);
+
+ return ret;
+}
+
+/**
+ * write_size() - Write a size
+ *
+ * Writes a size in the correct format, either 32- or 64-bit
+ *
+ * @upl: UPL state
+ * @node: Node to write to
+ * @prop: Property name to write
+ * @size: Size to write
+ * Return: 0 if OK, -ve on error
+ */
+static int write_size(const struct upl *upl, ofnode node, const char *prop,
+ ulong size)
+{
+ int ret;
+
+ if (upl->size_cells == 1)
+ ret = ofnode_write_u32(node, prop, size);
+ else
+ ret = ofnode_write_u64(node, prop, size);
+
+ return ret;
+}
+
+/**
+ * ofnode_write_bitmask() - Write a bit mask as a string list
+ *
+ * @node: Node to write to
+ * @prop: Property name to write
+ * @names: Array of names for each bit
+ * @count: Number of array entries
+ * @value: Bit-mask value to write
+ * Return: 0 if OK, -EINVAL if a bit number is not defined, -ENOSPC if the
+ * string is too long for the (internal) buffer
+ */
+static int ofnode_write_bitmask(ofnode node, const char *prop,
+ const char *const names[], uint count,
+ uint value)
+{
+ char buf[128];
+ char *ptr, *end = buf + sizeof(buf);
+ uint bit;
+ int ret;
+
+ ptr = buf;
+ for (bit = 0; bit < count; bit++) {
+ if (value & BIT(bit)) {
+ const char *str = names[bit];
+ uint len;
+
+ if (!str) {
+ log_debug("Unnamed bit number %d\n", bit);
+ return log_msg_ret("bit", -EINVAL);
+ }
+ len = strlen(str) + 1;
+ if (ptr + len > end) {
+ log_debug("String array too long\n");
+ return log_msg_ret("bit", -ENOSPC);
+ }
+
+ memcpy(ptr, str, len);
+ ptr += len;
+ }
+ }
+
+ ret = ofnode_write_prop(node, prop, buf, ptr - buf, true);
+ if (ret)
+ return log_msg_ret("wri", ret);
+
+ return 0;
+}
+
+/**
+ * ofnode_write_value() - Write an int as a string value using a lookup
+ *
+ * @node: Node to write to
+ * @prop: Property name to write
+ * @names: Array of names for each int value
+ * @count: Number of array entries
+ * @value: Int value to write
+ * Return: 0 if OK, -EINVAL if a bit number is not defined, -ENOSPC if the
+ * string is too long for the (internal) buffer
+ */
+static int ofnode_write_value(ofnode node, const char *prop,
+ const char *const names[], uint count,
+ uint value)
+{
+ const char *str;
+ int ret;
+
+ if (value >= count) {
+ log_debug("Value of range %d\n", value);
+ return log_msg_ret("val", -ERANGE);
+ }
+ str = names[value];
+ if (!str) {
+ log_debug("Unnamed value %d\n", value);
+ return log_msg_ret("val", -EINVAL);
+ }
+ ret = ofnode_write_string(node, prop, str);
+ if (ret)
+ return log_msg_ret("wri", ret);
+
+ return 0;
+}
+
+/**
+ * add_root_props() - Add root properties to the tree
+ *
+ * @node: Node to add to
+ * Return 0 if OK, -ve on error
+ */
+static int add_root_props(const struct upl *upl, ofnode node)
+{
+ int ret;
+
+ ret = ofnode_write_u32(node, UPLP_ADDRESS_CELLS, upl->addr_cells);
+ if (!ret)
+ ret = ofnode_write_u32(node, UPLP_SIZE_CELLS, upl->size_cells);
+ if (ret)
+ return log_msg_ret("cel", ret);
+
+ return 0;
+}
+
+/**
+ * add_upl_params() - Add UPL parameters node
+ *
+ * @upl: UPL state
+ * @options: /options node to add to
+ * Return 0 if OK, -ve on error
+ */
+static int add_upl_params(const struct upl *upl, ofnode options)
+{
+ ofnode node;
+ int ret;
+
+ ret = ofnode_add_subnode(options, UPLN_UPL_PARAMS, &node);
+ if (ret)
+ return log_msg_ret("img", ret);
+
+ ret = write_addr(upl, node, UPLP_SMBIOS, upl->smbios);
+ if (!ret)
+ ret = write_addr(upl, node, UPLP_ACPI, upl->acpi);
+ if (!ret && upl->bootmode)
+ ret = ofnode_write_bitmask(node, UPLP_BOOTMODE, bootmode_names,
+ UPLBM_COUNT, upl->bootmode);
+ if (!ret)
+ ret = ofnode_write_u32(node, UPLP_ADDR_WIDTH, upl->addr_width);
+ if (!ret)
+ ret = ofnode_write_u32(node, UPLP_ACPI_NVS_SIZE,
+ upl->acpi_nvs_size);
+ if (ret)
+ return log_msg_ret("cnf", ret);
+
+ return 0;
+}
+
+/**
+ * add_upl_image() - Add /options/upl-image nodes and properties to the tree
+ *
+ * @upl: UPL state
+ * @node: /options node to add to
+ * Return 0 if OK, -ve on error
+ */
+static int add_upl_image(const struct upl *upl, ofnode options)
+{
+ ofnode node;
+ int ret, i;
+
+ ret = ofnode_add_subnode(options, UPLN_UPL_IMAGE, &node);
+ if (ret)
+ return log_msg_ret("img", ret);
+
+ if (upl->fit)
+ ret = ofnode_write_u32(node, UPLP_FIT, upl->fit);
+ if (!ret && upl->conf_offset)
+ ret = ofnode_write_u32(node, UPLP_CONF_OFFSET,
+ upl->conf_offset);
+ if (ret)
+ return log_msg_ret("cnf", ret);
+
+ for (i = 0; i < upl->image.count; i++) {
+ const struct upl_image *img = alist_get(&upl->image, i,
+ struct upl_image);
+ ofnode subnode;
+ char name[10];
+
+ snprintf(name, sizeof(name), UPLN_IMAGE "-%d", i + 1);
+ ret = ofnode_add_subnode(node, name, &subnode);
+ if (ret)
+ return log_msg_ret("sub", ret);
+
+ ret = write_addr(upl, subnode, UPLP_LOAD, img->load);
+ if (!ret)
+ ret = write_size(upl, subnode, UPLP_SIZE, img->size);
+ if (!ret && img->offset)
+ ret = ofnode_write_u32(subnode, UPLP_OFFSET,
+ img->offset);
+ ret = ofnode_write_string(subnode, UPLP_DESCRIPTION,
+ img->description);
+ if (ret)
+ return log_msg_ret("sim", ret);
+ }
+
+ return 0;
+}
+
+/**
+ * buffer_addr_size() - Generate a set of addr/size pairs
+ *
+ * Each base/size value from each region is written to the buffer in a suitable
+ * format to be written to the devicetree
+ *
+ * @upl: UPL state
+ * @buf: Buffer to write to
+ * @size: Buffer size
+ * @num_regions: Number of regions to process
+ * @region: List of regions to process (struct memregion)
+ * Returns: Number of bytes written, or -ENOSPC if the buffer is too small
+ */
+static int buffer_addr_size(const struct upl *upl, char *buf, int size,
+ uint num_regions, const struct alist *region)
+{
+ char *ptr, *end = buf + size;
+ int i;
+
+ ptr = buf;
+ for (i = 0; i < num_regions; i++) {
+ const struct memregion *reg = alist_get(region, i,
+ struct memregion);
+
+ if (upl->addr_cells == 1)
+ *(u32 *)ptr = cpu_to_fdt32(reg->base);
+ else
+ *(u64 *)ptr = cpu_to_fdt64(reg->base);
+ ptr += upl->addr_cells * sizeof(u32);
+
+ if (upl->size_cells == 1)
+ *(u32 *)ptr = cpu_to_fdt32(reg->size);
+ else
+ *(u64 *)ptr = cpu_to_fdt64(reg->size);
+ ptr += upl->size_cells * sizeof(u32);
+ if (ptr > end)
+ return -ENOSPC;
+ }
+
+ return ptr - buf;
+}
+
+/**
+ * add_upl_memory() - Add /memory nodes to the tree
+ *
+ * @upl: UPL state
+ * @root: Parent node to contain the new /memory nodes
+ * Return 0 if OK, -ve on error
+ */
+static int add_upl_memory(const struct upl *upl, ofnode root)
+{
+ int i;
+
+ for (i = 0; i < upl->mem.count; i++) {
+ const struct upl_mem *mem = alist_get(&upl->mem, i,
+ struct upl_mem);
+ char buf[mem->region.count * sizeof(64) * 2];
+ const struct memregion *first;
+ char name[26];
+ int ret, len;
+ ofnode node;
+
+ if (!mem->region.count) {
+ log_debug("Memory %d has no regions\n", i);
+ return log_msg_ret("reg", -EINVAL);
+ }
+ first = alist_get(&mem->region, 0, struct memregion);
+ sprintf(name, UPLN_MEMORY "@0x%lx", first->base);
+ ret = ofnode_add_subnode(root, name, &node);
+ if (ret)
+ return log_msg_ret("mem", ret);
+
+ len = buffer_addr_size(upl, buf, sizeof(buf), mem->region.count,
+ &mem->region);
+ if (len < 0)
+ return log_msg_ret("buf", len);
+
+ ret = ofnode_write_prop(node, UPLP_REG, buf, len, true);
+ if (!ret && mem->hotpluggable)
+ ret = ofnode_write_bool(node, UPLP_HOTPLUGGABLE,
+ mem->hotpluggable);
+ if (ret)
+ return log_msg_ret("lst", ret);
+ }
+
+ return 0;
+}
+
+/**
+ * add_upl_memmap() - Add memory-map nodes to the tree
+ *
+ * @upl: UPL state
+ * @root: Parent node to contain the new /memory-map node and its subnodes
+ * Return 0 if OK, -ve on error
+ */
+static int add_upl_memmap(const struct upl *upl, ofnode root)
+{
+ ofnode mem_node;
+ int i, ret;
+
+ if (!upl->memmap.count)
+ return 0;
+ ret = ofnode_add_subnode(root, UPLN_MEMORY_MAP, &mem_node);
+ if (ret)
+ return log_msg_ret("img", ret);
+
+ for (i = 0; i < upl->memmap.count; i++) {
+ const struct upl_memmap *memmap = alist_get(&upl->memmap, i,
+ struct upl_memmap);
+ char buf[memmap->region.count * sizeof(64) * 2];
+ const struct memregion *first;
+ char name[26];
+ int ret, len;
+ ofnode node;
+
+ if (!memmap->region.count) {
+ log_debug("Memory %d has no regions\n", i);
+ return log_msg_ret("reg", -EINVAL);
+ }
+ first = alist_get(&memmap->region, 0, struct memregion);
+ sprintf(name, "%s@0x%lx", memmap->name, first->base);
+ ret = ofnode_add_subnode(mem_node, name, &node);
+ if (ret)
+ return log_msg_ret("memmap", ret);
+
+ len = buffer_addr_size(upl, buf, sizeof(buf),
+ memmap->region.count, &memmap->region);
+ if (len < 0)
+ return log_msg_ret("buf", len);
+ ret = ofnode_write_prop(node, UPLP_REG, buf, len, true);
+ if (!ret && memmap->usage)
+ ret = ofnode_write_bitmask(node, UPLP_USAGE,
+ usage_names,
+ UPLUS_COUNT, memmap->usage);
+ if (ret)
+ return log_msg_ret("lst", ret);
+ }
+
+ return 0;
+}
+
+/**
+ * add_upl_memres() - Add /memory-reserved nodes to the tree
+ *
+ * @upl: UPL state
+ * @root: Parent node to contain the new node
+ * Return 0 if OK, -ve on error
+ */
+static int add_upl_memres(const struct upl *upl, ofnode root,
+ bool skip_existing)
+{
+ ofnode mem_node;
+ int i, ret;
+
+ if (!upl->memmap.count)
+ return 0;
+ ret = ofnode_add_subnode(root, UPLN_MEMORY_RESERVED, &mem_node);
+ if (ret) {
+ if (skip_existing && ret == -EEXIST)
+ return 0;
+ return log_msg_ret("img", ret);
+ }
+
+ for (i = 0; i < upl->memres.count; i++) {
+ const struct upl_memres *memres = alist_get(&upl->memres, i,
+ struct upl_memres);
+ char buf[memres->region.count * sizeof(64) * 2];
+ const struct memregion *first;
+ char name[26];
+ int ret, len;
+ ofnode node;
+
+ if (!memres->region.count) {
+ log_debug("Memory %d has no regions\n", i);
+ return log_msg_ret("reg", -EINVAL);
+ }
+ first = alist_get(&memres->region, 0, struct memregion);
+ sprintf(name, "%s@0x%lx", memres->name, first->base);
+ ret = ofnode_add_subnode(mem_node, name, &node);
+ if (ret)
+ return log_msg_ret("memres", ret);
+
+ len = buffer_addr_size(upl, buf, sizeof(buf),
+ memres->region.count, &memres->region);
+ ret = ofnode_write_prop(node, UPLP_REG, buf, len, true);
+ if (!ret && memres->no_map)
+ ret = ofnode_write_bool(node, UPLP_NO_MAP,
+ memres->no_map);
+ if (ret)
+ return log_msg_ret("lst", ret);
+ }
+
+ return 0;
+}
+
+/**
+ * add_upl_serial() - Add serial node
+ *
+ * @upl: UPL state
+ * @root: Parent node to contain the new node
+ * Return 0 if OK, -ve on error
+ */
+static int add_upl_serial(const struct upl *upl, ofnode root,
+ bool skip_existing)
+{
+ const struct upl_serial *ser = &upl->serial;
+ const struct memregion *first;
+ char name[26];
+ ofnode node;
+ int ret;
+
+ if (!ser->compatible || skip_existing)
+ return 0;
+ if (!ser->reg.count)
+ return log_msg_ret("ser", -EINVAL);
+ first = alist_get(&ser->reg, 0, struct memregion);
+ sprintf(name, UPLN_SERIAL "@0x%lx", first->base);
+ ret = ofnode_add_subnode(root, name, &node);
+ if (ret)
+ return log_msg_ret("img", ret);
+ ret = ofnode_write_string(node, UPLP_COMPATIBLE, ser->compatible);
+ if (!ret)
+ ret = ofnode_write_u32(node, UPLP_CLOCK_FREQUENCY,
+ ser->clock_frequency);
+ if (!ret)
+ ret = ofnode_write_u32(node, UPLP_CURRENT_SPEED,
+ ser->current_speed);
+ if (!ret) {
+ char buf[16];
+ int len;
+
+ len = buffer_addr_size(upl, buf, sizeof(buf), 1, &ser->reg);
+ if (len < 0)
+ return log_msg_ret("buf", len);
+
+ ret = ofnode_write_prop(node, UPLP_REG, buf, len, true);
+ }
+ if (!ret && ser->reg_io_shift != UPLD_REG_IO_SHIFT)
+ ret = ofnode_write_u32(node, UPLP_REG_IO_SHIFT,
+ ser->reg_io_shift);
+ if (!ret && ser->reg_offset != UPLD_REG_OFFSET)
+ ret = ofnode_write_u32(node, UPLP_REG_OFFSET, ser->reg_offset);
+ if (!ret && ser->reg_io_width != UPLD_REG_IO_WIDTH)
+ ret = ofnode_write_u32(node, UPLP_REG_IO_WIDTH,
+ ser->reg_io_width);
+ if (!ret && ser->virtual_reg)
+ ret = write_addr(upl, node, UPLP_VIRTUAL_REG, ser->virtual_reg);
+ if (!ret) {
+ ret = ofnode_write_value(node, UPLP_ACCESS_TYPE, access_types,
+ ARRAY_SIZE(access_types),
+ ser->access_type);
+ }
+ if (ret)
+ return log_msg_ret("ser", ret);
+
+ return 0;
+}
+
+/**
+ * add_upl_graphics() - Add graphics node
+ *
+ * @upl: UPL state
+ * @root: Parent node to contain the new node
+ * Return 0 if OK, -ve on error
+ */
+static int add_upl_graphics(const struct upl *upl, ofnode root)
+{
+ const struct upl_graphics *gra = &upl->graphics;
+ const struct memregion *first;
+ char name[36];
+ ofnode node;
+ int ret;
+
+ if (!gra->reg.count)
+ return log_msg_ret("gra", -ENOENT);
+ first = alist_get(&gra->reg, 0, struct memregion);
+ sprintf(name, UPLN_GRAPHICS "@0x%lx", first->base);
+ ret = ofnode_add_subnode(root, name, &node);
+ if (ret)
+ return log_msg_ret("gra", ret);
+
+ ret = ofnode_write_string(node, UPLP_COMPATIBLE, UPLC_GRAPHICS);
+ if (!ret) {
+ char buf[16];
+ int len;
+
+ len = buffer_addr_size(upl, buf, sizeof(buf), 1, &gra->reg);
+ if (len < 0)
+ return log_msg_ret("buf", len);
+
+ ret = ofnode_write_prop(node, UPLP_REG, buf, len, true);
+ }
+ if (!ret)
+ ret = ofnode_write_u32(node, UPLP_WIDTH, gra->width);
+ if (!ret)
+ ret = ofnode_write_u32(node, UPLP_HEIGHT, gra->height);
+ if (!ret)
+ ret = ofnode_write_u32(node, UPLP_STRIDE, gra->stride);
+ if (!ret) {
+ ret = ofnode_write_value(node, UPLP_GRAPHICS_FORMAT,
+ graphics_formats,
+ ARRAY_SIZE(graphics_formats),
+ gra->format);
+ }
+ if (ret)
+ return log_msg_ret("pro", ret);
+
+ return 0;
+}
+
+int upl_write_handoff(const struct upl *upl, ofnode root, bool skip_existing)
+{
+ ofnode options;
+ int ret;
+
+ ret = add_root_props(upl, root);
+ if (ret)
+ return log_msg_ret("ad1", ret);
+ ret = ofnode_add_subnode(root, UPLN_OPTIONS, &options);
+ if (ret && ret != -EEXIST)
+ return log_msg_ret("opt", -EINVAL);
+
+ ret = add_upl_params(upl, options);
+ if (ret)
+ return log_msg_ret("ad1", ret);
+
+ ret = add_upl_image(upl, options);
+ if (ret)
+ return log_msg_ret("ad2", ret);
+
+ ret = add_upl_memory(upl, root);
+ if (ret)
+ return log_msg_ret("ad3", ret);
+
+ ret = add_upl_memmap(upl, root);
+ if (ret)
+ return log_msg_ret("ad4", ret);
+
+ ret = add_upl_memres(upl, root, skip_existing);
+ if (ret)
+ return log_msg_ret("ad5", ret);
+
+ ret = add_upl_serial(upl, root, skip_existing);
+ if (ret)
+ return log_msg_ret("ad6", ret);
+
+ ret = add_upl_graphics(upl, root);
+ if (ret && ret != -ENOENT)
+ return log_msg_ret("ad6", ret);
+
+ return 0;
+}
+
+int upl_create_handoff_tree(const struct upl *upl, oftree *treep)
+{
+ ofnode root;
+ oftree tree;
+ int ret;
+
+ ret = oftree_new(&tree);
+ if (ret)
+ return log_msg_ret("new", ret);
+
+ root = oftree_root(tree);
+ if (!ofnode_valid(root))
+ return log_msg_ret("roo", -EINVAL);
+
+ ret = upl_write_handoff(upl, root, false);
+ if (ret)
+ return log_msg_ret("wr", ret);
+
+ *treep = tree;
+
+ return 0;
+}
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 978f44e..43f78a5 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -388,6 +388,13 @@
help
Support reading NAND Seattle Image (SEAMA) images.
+config CMD_UPL
+ bool "upl - Universal Payload Specification"
+ help
+ Provides commands to deal with UPL payloads and handoff information.
+ U-Boot supports generating and accepting handoff information. The
+ mkimage tool will eventually support creating payloads.
+
config CMD_VBE
bool "vbe - Verified Boot for Embedded"
depends on BOOTMETH_VBE
@@ -2003,6 +2010,7 @@
config CMD_WGET
bool "wget"
select PROT_TCP
+ default y if SANDBOX
help
wget is a simple command to download kernel, or other files,
from a http server over TCP.
diff --git a/cmd/Makefile b/cmd/Makefile
index 87133cc..91227f1 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -189,6 +189,7 @@
obj-$(CONFIG_CMD_UNIVERSE) += universe.o
obj-$(CONFIG_CMD_UNLZ4) += unlz4.o
obj-$(CONFIG_CMD_UNZIP) += unzip.o
+obj-$(CONFIG_CMD_UPL) += upl.o
obj-$(CONFIG_CMD_VIRTIO) += virtio.o
obj-$(CONFIG_CMD_WDT) += wdt.o
obj-$(CONFIG_CMD_LZMADEC) += lzmadec.o
diff --git a/cmd/date.c b/cmd/date.c
index 755adec..8614f02 100644
--- a/cmd/date.c
+++ b/cmd/date.c
@@ -31,7 +31,6 @@
int old_bus __maybe_unused;
/* switch to correct I2C bus */
-#ifdef CONFIG_DM_RTC
struct udevice *dev;
rcode = uclass_get_device_by_seq(UCLASS_RTC, 0, &dev);
@@ -42,35 +41,19 @@
return CMD_RET_FAILURE;
}
}
-#elif CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
- old_bus = i2c_get_bus_num();
- i2c_set_bus_num(CFG_SYS_RTC_BUS_NUM);
-#else
- old_bus = I2C_GET_BUS();
- I2C_SET_BUS(CFG_SYS_RTC_BUS_NUM);
-#endif
switch (argc) {
case 2: /* set date & time */
if (strcmp(argv[1],"reset") == 0) {
puts ("Reset RTC...\n");
-#ifdef CONFIG_DM_RTC
rcode = dm_rtc_reset(dev);
if (!rcode)
rcode = dm_rtc_set(dev, &default_tm);
-#else
- rtc_reset();
- rcode = rtc_set(&default_tm);
-#endif
if (rcode)
puts("## Failed to set date after RTC reset\n");
} else {
/* initialize tm with current time */
-#ifdef CONFIG_DM_RTC
rcode = dm_rtc_get(dev, &tm);
-#else
- rcode = rtc_get(&tm);
-#endif
if (!rcode) {
/* insert new date & time */
if (mk_date(argv[1], &tm) != 0) {
@@ -78,11 +61,7 @@
break;
}
/* and write to RTC */
-#ifdef CONFIG_DM_RTC
rcode = dm_rtc_set(dev, &tm);
-#else
- rcode = rtc_set(&tm);
-#endif
if (rcode) {
printf("## Set date failed: err=%d\n",
rcode);
@@ -93,11 +72,7 @@
}
fallthrough;
case 1: /* get date & time */
-#ifdef CONFIG_DM_RTC
rcode = dm_rtc_get(dev, &tm);
-#else
- rcode = rtc_get(&tm);
-#endif
if (rcode) {
puts("## Get date failed\n");
break;
@@ -114,13 +89,6 @@
rcode = CMD_RET_USAGE;
}
- /* switch back to original I2C bus */
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
- i2c_set_bus_num(old_bus);
-#elif !defined(CONFIG_DM_RTC)
- I2C_SET_BUS(old_bus);
-#endif
-
return rcode ? CMD_RET_FAILURE : 0;
}
diff --git a/cmd/i2c.c b/cmd/i2c.c
index 7dac0a9..7246c4f 100644
--- a/cmd/i2c.c
+++ b/cmd/i2c.c
@@ -1698,18 +1698,6 @@
for (i = 0; i < CFG_SYS_NUM_I2C_BUSES; i++) {
printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name);
-#ifndef CFG_SYS_I2C_DIRECT_BUS
- int j;
-
- for (j = 0; j < CFG_SYS_I2C_MAX_HOPS; j++) {
- if (i2c_bus[i].next_hop[j].chip == 0)
- break;
- printf("->%s@0x%2x:%d",
- i2c_bus[i].next_hop[j].mux.name,
- i2c_bus[i].next_hop[j].chip,
- i2c_bus[i].next_hop[j].channel);
- }
-#endif
printf("\n");
}
#endif
@@ -1734,17 +1722,6 @@
return -1;
}
printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name);
-#ifndef CFG_SYS_I2C_DIRECT_BUS
- int j;
- for (j = 0; j < CFG_SYS_I2C_MAX_HOPS; j++) {
- if (i2c_bus[i].next_hop[j].chip == 0)
- break;
- printf("->%s@0x%2x:%d",
- i2c_bus[i].next_hop[j].mux.name,
- i2c_bus[i].next_hop[j].chip,
- i2c_bus[i].next_hop[j].channel);
- }
-#endif
printf("\n");
#endif
}
diff --git a/cmd/led.c b/cmd/led.c
index 2f786f3..91fb856 100644
--- a/cmd/led.c
+++ b/cmd/led.c
@@ -118,7 +118,7 @@
return 0;
}
-#ifdef CONFIG_LED_BLINK
+#if defined(CONFIG_LED_BLINK) || defined(CONFIG_LED_SW_BLINK)
#define BLINK "|blink [blink-freq in ms]"
#else
#define BLINK ""
diff --git a/cmd/ubi.c b/cmd/ubi.c
index 92998af..0e62e44 100644
--- a/cmd/ubi.c
+++ b/cmd/ubi.c
@@ -423,18 +423,84 @@
return ubi_volume_continue_write(volume, buf, size);
}
-int ubi_volume_write(char *volume, void *buf, size_t size)
+static int ubi_volume_offset_write(char *volume, void *buf, loff_t offset,
+ size_t size)
{
- return ubi_volume_begin_write(volume, buf, size, size);
+ int len, tbuf_size, ret;
+ u64 lnum;
+ struct ubi_volume *vol;
+ loff_t off = offset;
+ void *tbuf;
+
+ vol = ubi_find_volume(volume);
+ if (!vol)
+ return -ENODEV;
+
+ if (size > vol->reserved_pebs * (ubi->leb_size - vol->data_pad))
+ return -EINVAL;
+
+ tbuf_size = vol->usable_leb_size;
+ tbuf = malloc_cache_aligned(tbuf_size);
+ if (!tbuf)
+ return -ENOMEM;
+
+ lnum = off;
+ off = do_div(lnum, vol->usable_leb_size);
+
+ do {
+ struct ubi_volume_desc desc = {
+ .vol = vol,
+ .mode = UBI_READWRITE,
+ };
+
+ len = size > tbuf_size ? tbuf_size : size;
+ if (off + len >= vol->usable_leb_size)
+ len = vol->usable_leb_size - off;
+
+ ret = ubi_read(&desc, (int)lnum, tbuf, 0, tbuf_size);
+ if (ret) {
+ pr_err("Failed to read leb %lld (%d)\n", lnum, ret);
+ goto exit;
+ }
+
+ memcpy(tbuf + off, buf, len);
+
+ ret = ubi_leb_change(&desc, (int)lnum, tbuf, tbuf_size);
+ if (ret) {
+ pr_err("Failed to write leb %lld (%d)\n", lnum, ret);
+ goto exit;
+ }
+
+ off += len;
+ if (off >= vol->usable_leb_size) {
+ lnum++;
+ off -= vol->usable_leb_size;
+ }
+
+ buf += len;
+ size -= len;
+ } while (size);
+
+exit:
+ free(tbuf);
+ return ret;
+}
+
+int ubi_volume_write(char *volume, void *buf, loff_t offset, size_t size)
+{
+ if (!offset)
+ return ubi_volume_begin_write(volume, buf, size, size);
+
+ return ubi_volume_offset_write(volume, buf, offset, size);
}
-int ubi_volume_read(char *volume, char *buf, size_t size)
+int ubi_volume_read(char *volume, char *buf, loff_t offset, size_t size)
{
int err, lnum, off, len, tbuf_size;
void *tbuf;
unsigned long long tmp;
struct ubi_volume *vol;
- loff_t offp = 0;
+ loff_t offp = offset;
size_t len_read;
vol = ubi_find_volume(volume);
@@ -769,7 +835,7 @@
(void *)addr, size, full_size);
}
} else {
- ret = ubi_volume_write(argv[3], (void *)addr, size);
+ ret = ubi_volume_write(argv[3], (void *)addr, 0, size);
}
if (!ret) {
printf("%lld bytes written to volume %s\n", size,
@@ -795,7 +861,7 @@
}
if (argc == 3) {
- return ubi_volume_read(argv[3], (char *)addr, size);
+ return ubi_volume_read(argv[3], (char *)addr, 0, size);
}
}
diff --git a/cmd/upl.c b/cmd/upl.c
new file mode 100644
index 0000000..c974588
--- /dev/null
+++ b/cmd/upl.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Commands for UPL handoff generation
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#define LOG_CATEGORY UCLASS_BOOTSTD
+
+#include <abuf.h>
+#include <alist.h>
+#include <command.h>
+#include <display_options.h>
+#include <mapmem.h>
+#include <string.h>
+#include <upl.h>
+#include <dm/ofnode.h>
+#include <test/ut.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int do_upl_info(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ const struct upl *upl = gd_upl();
+
+ printf("UPL state: %sactive\n", upl ? "" : "in");
+ if (!upl)
+ return 0;
+ if (argc > 1 && !strcmp("-v", argv[1])) {
+ int i;
+
+ printf("fit %lx\n", upl->fit);
+ printf("conf_offset %x\n", upl->conf_offset);
+ for (i = 0; i < upl->image.count; i++) {
+ const struct upl_image *img =
+ alist_get(&upl->image, i, struct upl_image);
+
+ printf("image %d: load %lx size %lx offset %x: %s\n", i,
+ img->load, img->size, img->offset,
+ img->description);
+ }
+ }
+
+ return 0;
+}
+
+static int do_upl_write(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ struct upl s_upl, *upl = &s_upl;
+ struct unit_test_state uts;
+ struct abuf buf;
+ oftree tree;
+ ulong addr;
+ int ret;
+
+ upl_get_test_data(&uts, upl);
+
+ log_debug("Writing UPL\n");
+ ret = upl_create_handoff_tree(upl, &tree);
+ if (ret) {
+ log_err("Failed to write (err=%dE)\n", ret);
+ return CMD_RET_FAILURE;
+ }
+
+ log_debug("Flattening\n");
+ ret = oftree_to_fdt(tree, &buf);
+ if (ret) {
+ log_err("Failed to write (err=%dE)\n", ret);
+ return CMD_RET_FAILURE;
+ }
+ addr = map_to_sysmem(abuf_data(&buf));
+ printf("UPL handoff written to %lx size %lx\n", addr, abuf_size(&buf));
+ if (env_set_hex("upladdr", addr) ||
+ env_set_hex("uplsize", abuf_size(&buf))) {
+ printf("Cannot set env var\n");
+ return CMD_RET_FAILURE;
+ }
+
+ log_debug("done\n");
+
+ return 0;
+}
+
+static int do_upl_read(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ struct upl s_upl, *upl = &s_upl;
+ oftree tree;
+ ulong addr;
+ int ret;
+
+ if (argc < 1)
+ return CMD_RET_USAGE;
+ addr = hextoul(argv[1], NULL);
+
+ printf("Reading UPL at %lx\n", addr);
+ tree = oftree_from_fdt(map_sysmem(addr, 0));
+ ret = upl_read_handoff(upl, tree);
+ if (ret) {
+ log_err("Failed to read (err=%dE)\n", ret);
+ return CMD_RET_FAILURE;
+ }
+
+ return 0;
+}
+
+U_BOOT_LONGHELP(upl,
+ "info [-v] - Check UPL status\n"
+ "upl read <addr> - Read handoff information\n"
+ "upl write - Write handoff information");
+
+U_BOOT_CMD_WITH_SUBCMDS(upl, "Universal Payload support", upl_help_text,
+ U_BOOT_SUBCMD_MKENT(info, 2, 1, do_upl_info),
+ U_BOOT_SUBCMD_MKENT(read, 2, 1, do_upl_read),
+ U_BOOT_SUBCMD_MKENT(write, 1, 1, do_upl_write));
diff --git a/common/board_f.c b/common/board_f.c
index 29e1851..454426d 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -40,6 +40,7 @@
#include <sysreset.h>
#include <timer.h>
#include <trace.h>
+#include <upl.h>
#include <video.h>
#include <watchdog.h>
#include <asm/cache.h>
@@ -683,13 +684,7 @@
if (gd->flags & GD_FLG_SKIP_RELOC)
return 0;
if (gd->new_bootstage) {
- int size = bootstage_get_size();
-
- debug("Copying bootstage from %p to %p, size %x\n",
- gd->bootstage, gd->new_bootstage, size);
- memcpy(gd->new_bootstage, gd->bootstage, size);
- gd->bootstage = gd->new_bootstage;
- bootstage_relocate();
+ bootstage_relocate(gd->new_bootstage);
}
#endif
@@ -859,6 +854,26 @@
return 0;
}
+static int initf_upl(void)
+{
+ struct upl *upl;
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_UPL_IN) || !(gd->flags & GD_FLG_UPL))
+ return 0;
+
+ upl = malloc(sizeof(struct upl));
+ if (upl)
+ ret = upl_read_handoff(upl, oftree_default());
+ if (ret) {
+ printf("UPL handoff: read failure (err=%dE)\n", ret);
+ return ret;
+ }
+ gd_set_upl(upl);
+
+ return 0;
+}
+
static const init_fnc_t init_sequence_f[] = {
setup_mon_len,
#ifdef CONFIG_OF_CONTROL
@@ -868,6 +883,7 @@
trace_early_init,
#endif
initf_malloc,
+ initf_upl,
log_init,
initf_bootstage, /* uses its own timer, so does not need DM */
event_init,
diff --git a/common/board_r.c b/common/board_r.c
index d4ba245..f445803 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -521,6 +521,8 @@
uclass_count);
if (CONFIG_IS_ENABLED(OF_REAL))
printf(", devicetree: %s", fdtdec_get_srcname());
+ if (CONFIG_IS_ENABLED(UPL))
+ printf(", universal payload active");
printf("\n");
if (IS_ENABLED(CONFIG_OF_HAS_PRIOR_STAGE) &&
(gd->fdt_src == FDTSRC_SEPARATE ||
diff --git a/common/bootstage.c b/common/bootstage.c
index b6c268d..49acc90 100644
--- a/common/bootstage.c
+++ b/common/bootstage.c
@@ -54,12 +54,16 @@
u32 next_id; /* Next ID to use for bootstage */
};
-int bootstage_relocate(void)
+int bootstage_relocate(void *to)
{
- struct bootstage_data *data = gd->bootstage;
+ struct bootstage_data *data;
int i;
char *ptr;
+ debug("Copying bootstage from %p to %p\n", gd->bootstage, to);
+ memcpy(to, gd->bootstage, sizeof(struct bootstage_data));
+ data = gd->bootstage = to;
+
/* Figure out where to relocate the strings to */
ptr = (char *)(data + 1);
diff --git a/common/dlmalloc.c b/common/dlmalloc.c
index 62e8557..1ac7ce3 100644
--- a/common/dlmalloc.c
+++ b/common/dlmalloc.c
@@ -386,8 +386,8 @@
/* pad request bytes into a usable size */
#define request2size(req) \
- (((long)((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) < \
- (long)(MINSIZE + MALLOC_ALIGN_MASK)) ? MINSIZE : \
+ ((((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) < \
+ (MINSIZE + MALLOC_ALIGN_MASK)) ? MINSIZE : \
(((req) + (SIZE_SZ + MALLOC_ALIGN_MASK)) & ~(MALLOC_ALIGN_MASK)))
/* Check if m has acceptable alignment */
@@ -581,6 +581,9 @@
ulong old = mem_malloc_brk;
ulong new = old + increment;
+ if ((new < mem_malloc_start) || (new > mem_malloc_end))
+ return (void *)MORECORE_FAILURE;
+
/*
* if we are giving memory back make sure we clear it out since
* we set MORECORE_CLEARS to 1
@@ -588,9 +591,6 @@
if (increment < 0)
memset((void *)new, 0, -increment);
- if ((new < mem_malloc_start) || (new > mem_malloc_end))
- return (void *)MORECORE_FAILURE;
-
mem_malloc_brk = new;
return (void *)old;
@@ -1274,7 +1274,8 @@
return NULL;
}
- if ((long)bytes < 0) return NULL;
+ if (bytes > CONFIG_SYS_MALLOC_LEN || (long)bytes < 0)
+ return NULL;
nb = request2size(bytes); /* padded request size; */
@@ -1687,7 +1688,8 @@
}
#endif
- if ((long)bytes < 0) return NULL;
+ if (bytes > CONFIG_SYS_MALLOC_LEN || (long)bytes < 0)
+ return NULL;
/* realloc of null is supposed to be same as malloc */
if (oldmem == NULL) return mALLOc_impl(bytes);
@@ -1698,6 +1700,10 @@
panic("pre-reloc realloc() is not supported");
}
#endif
+ if (CONFIG_IS_ENABLED(UNIT_TEST) && malloc_testing) {
+ if (--malloc_max_allocs < 0)
+ return NULL;
+ }
newp = oldp = mem2chunk(oldmem);
newsize = oldsize = chunksize(oldp);
@@ -1907,7 +1913,8 @@
mchunkptr remainder; /* spare room at end to split off */
long remainder_size; /* its size */
- if ((long)bytes < 0) return NULL;
+ if (bytes > CONFIG_SYS_MALLOC_LEN || (long)bytes < 0)
+ return NULL;
#if CONFIG_IS_ENABLED(SYS_MALLOC_F)
if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) {
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 6f56ca9..44a68ab 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -78,6 +78,7 @@
hex "Maximum size of the SPL image, excluding BSS"
default 0x30000 if ARCH_MX6 && MX6_OCRAM_256KB
default 0x1b000 if AM33XX && !TI_SECURE_DEVICE
+ default 0xec00 if OMAP34XX
default 0x10000 if ARCH_MX6 && !MX6_OCRAM_256KB
default 0x7fa0 if SUNXI_SRAM_ADDRESS = 0x10000
default 0x7fa0 if SUNXI_SRAM_ADDRESS = 0x20000 && !MACH_SUN50I_H616
@@ -206,7 +207,7 @@
config SPL_BINMAN_UBOOT_SYMBOLS
bool "Declare binman symbols for U-Boot phases in SPL"
depends on SPL_BINMAN_SYMBOLS
- default n if ARCH_IMX8M || ARCH_IMX9
+ default n if ARCH_IMX8M || ARCH_IMX8ULP || ARCH_IMX9
default y
help
This enables use of symbols in SPL which refer to U-Boot phases,
@@ -261,6 +262,7 @@
config SPL_TEXT_BASE
hex "SPL Text Base"
+ default 0x40200000 if OMAP34XX
default 0x402F4000 if AM43XX
default 0x402F0400 if AM33XX
default 0x40301350 if OMAP54XX
diff --git a/common/spl/Kconfig.tpl b/common/spl/Kconfig.tpl
index 4ee3b9b..92d4d43 100644
--- a/common/spl/Kconfig.tpl
+++ b/common/spl/Kconfig.tpl
@@ -23,7 +23,7 @@
config TPL_BINMAN_UBOOT_SYMBOLS
bool "Declare binman symbols for U-Boot phases in TPL"
depends on TPL_BINMAN_SYMBOLS
- default n if ARCH_IMX8M || ARCH_IMX9
+ default n if ARCH_IMX8M || ARCH_IMX8ULP || ARCH_IMX9
default y
help
This enables use of symbols in TPL which refer to U-Boot phases,
diff --git a/common/spl/Kconfig.vpl b/common/spl/Kconfig.vpl
index f199302..d06f36d 100644
--- a/common/spl/Kconfig.vpl
+++ b/common/spl/Kconfig.vpl
@@ -243,7 +243,7 @@
config VPL_BINMAN_UBOOT_SYMBOLS
bool "Declare binman symbols for U-Boot phases in VPL"
depends on VPL_BINMAN_SYMBOLS
- default n if ARCH_IMX8M || ARCH_IMX9
+ default n if ARCH_IMX8M || ARCH_IMX8ULP || ARCH_IMX9
default y
help
This enables use of symbols in VPL which refer to U-Boot phases,
diff --git a/common/spl/Makefile b/common/spl/Makefile
index 4809f9c..137b184 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -37,3 +37,5 @@
obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o
obj-$(CONFIG_$(SPL_TPL_)USB_SDP_SUPPORT) += spl_sdp.o
endif
+
+obj-$(CONFIG_$(SPL_TPL_)UPL) += spl_upl.o
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 7794ddc..d6a364d 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -810,6 +810,14 @@
printf(SPL_TPL_PROMPT
"SPL hand-off write failed (err=%d)\n", ret);
}
+ if (CONFIG_IS_ENABLED(UPL_OUT) && (gd->flags & GD_FLG_UPL)) {
+ ret = spl_write_upl_handoff(&spl_image);
+ if (ret) {
+ printf(SPL_TPL_PROMPT
+ "UPL hand-off write failed (err=%d)\n", ret);
+ hang();
+ }
+ }
if (CONFIG_IS_ENABLED(BLOBLIST)) {
ret = bloblist_finish();
if (ret)
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index 2a097f4..1ad5a69 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -12,6 +12,7 @@
#include <memalign.h>
#include <mapmem.h>
#include <spl.h>
+#include <upl.h>
#include <sysinfo.h>
#include <asm/global_data.h>
#include <asm/io.h>
@@ -336,6 +337,8 @@
image_info->entry_point = FDT_ERROR;
}
+ upl_add_image(fit, node, load_addr, length);
+
return 0;
}
@@ -847,6 +850,8 @@
spl_image->entry_point = spl_image->load_addr;
spl_image->flags |= SPL_FIT_FOUND;
+ upl_set_fit_info(map_to_sysmem(ctx.fit), ctx.conf_node,
+ spl_image->entry_point);
return 0;
}
@@ -941,6 +946,10 @@
if (ret < 0)
return ret;
}
+ spl_image->flags |= SPL_FIT_FOUND;
+
+ upl_set_fit_info(map_to_sysmem(header), conf_noffset,
+ spl_image->entry_point);
return 0;
}
diff --git a/common/spl/spl_upl.c b/common/spl/spl_upl.c
new file mode 100644
index 0000000..067d437
--- /dev/null
+++ b/common/spl/spl_upl.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * UPL handoff parsing
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#define LOG_CATEGORY UCLASS_BOOTSTD
+
+#include <alist.h>
+#include <bloblist.h>
+#include <dm.h>
+#include <image.h>
+#include <mapmem.h>
+#include <serial.h>
+#include <spl.h>
+#include <upl.h>
+#include <video.h>
+#include <asm/global_data.h>
+#include <dm/read.h>
+#include <dm/uclass-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct upl s_upl;
+
+void upl_set_fit_addr(ulong fit)
+{
+ struct upl *upl = &s_upl;
+
+ upl->fit = fit;
+}
+
+void upl_set_fit_info(ulong fit, int conf_offset, ulong entry_addr)
+{
+ struct upl *upl = &s_upl;
+
+ upl->fit = fit;
+ upl->conf_offset = conf_offset;
+ log_debug("upl: add fit %lx conf %x\n", fit, conf_offset);
+}
+
+int _upl_add_image(int node, ulong load_addr, ulong size, const char *desc)
+{
+ struct upl *upl = &s_upl;
+ struct upl_image img;
+
+ img.load = load_addr;
+ img.size = size;
+ img.offset = node;
+ img.description = desc;
+ if (!alist_add(&upl->image, img))
+ return -ENOMEM;
+ log_debug("upl: add image %s at %lx size %lx\n", desc, load_addr, size);
+
+ return 0;
+}
+
+static int write_serial(struct upl_serial *ser)
+{
+ struct udevice *dev = gd->cur_serial_dev;
+ struct serial_device_info info;
+ struct memregion region;
+ int ret;
+
+ if (!dev)
+ return log_msg_ret("ser", -ENOENT);
+ ret = serial_getinfo(dev, &info);
+ if (ret)
+ return log_msg_ret("inf", ret);
+
+ ser->compatible = ofnode_read_string(dev_ofnode(dev), "compatible");
+ ser->clock_frequency = info.clock;
+ ser->current_speed = gd->baudrate;
+ region.base = info.addr;
+ region.size = info.size;
+ alist_init_struct(&ser->reg, struct memregion);
+ if (!alist_add(&ser->reg, region))
+ return -ENOMEM;
+ ser->reg_io_shift = info.reg_shift;
+ ser->reg_offset = info.reg_offset;
+ ser->reg_io_width = info.reg_width;
+ ser->virtual_reg = 0;
+ ser->access_type = info.addr_space;
+
+ return 0;
+}
+
+static int write_graphics(struct upl_graphics *gra)
+{
+ struct video_uc_plat *plat;
+ struct video_priv *priv;
+ struct memregion region;
+ struct udevice *dev;
+
+ alist_init_struct(&gra->reg, struct memregion);
+ uclass_find_first_device(UCLASS_VIDEO, &dev);
+ if (!dev || !device_active(dev))
+ return log_msg_ret("vid", -ENOENT);
+
+ plat = dev_get_uclass_plat(dev);
+ region.base = plat->base;
+ region.size = plat->size;
+ if (!alist_add(&gra->reg, region))
+ return log_msg_ret("reg", -ENOMEM);
+
+ priv = dev_get_uclass_priv(dev);
+ gra->width = priv->xsize;
+ gra->height = priv->ysize;
+ gra->stride = priv->line_length; /* private field */
+ switch (priv->format) {
+ case VIDEO_RGBA8888:
+ case VIDEO_X8R8G8B8:
+ gra->format = UPLGF_ARGB32;
+ break;
+ case VIDEO_X8B8G8R8:
+ gra->format = UPLGF_ABGR32;
+ break;
+ case VIDEO_X2R10G10B10:
+ log_debug("device '%s': VIDEO_X2R10G10B10 not supported\n",
+ dev->name);
+ return log_msg_ret("for", -EPROTO);
+ case VIDEO_UNKNOWN:
+ log_debug("device '%s': Unknown video format\n", dev->name);
+ return log_msg_ret("for", -EPROTO);
+ }
+
+ return 0;
+}
+
+int spl_write_upl_handoff(struct spl_image_info *spl_image)
+{
+ struct upl *upl = &s_upl;
+ struct abuf buf;
+ ofnode root;
+ void *ptr;
+ int ret;
+
+ log_debug("UPL: Writing handoff - image_count=%d\n", upl->image.count);
+ upl->addr_cells = IS_ENABLED(CONFIG_PHYS_64BIT) ? 2 : 1;
+ upl->size_cells = IS_ENABLED(CONFIG_PHYS_64BIT) ? 2 : 1;
+ upl->bootmode = UPLBM_DEFAULT;
+ ret = write_serial(&upl->serial);
+ if (ret)
+ return log_msg_ret("ser", ret);
+ ret = write_graphics(&upl->graphics);
+ if (ret && ret != -ENOENT)
+ return log_msg_ret("gra", ret);
+
+ root = ofnode_root();
+ ret = upl_write_handoff(upl, root, true);
+ if (ret)
+ return log_msg_ret("wr", ret);
+
+ ret = oftree_to_fdt(oftree_default(), &buf);
+ if (ret)
+ return log_msg_ret("fdt", ret);
+ log_debug("FDT size %zx\n", abuf_size(&buf));
+
+ ptr = bloblist_add(BLOBLISTT_CONTROL_FDT, abuf_size(&buf), 0);
+ if (!ptr)
+ return log_msg_ret("blo", -ENOENT);
+ memcpy(ptr, abuf_data(&buf), abuf_size(&buf));
+
+ return 0;
+}
+
+void spl_upl_init(void)
+{
+ upl_init(&s_upl);
+}
diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig
index 9eac43a..dd30e8d 100644
--- a/configs/MPC837XERDB_defconfig
+++ b/configs/MPC837XERDB_defconfig
@@ -139,7 +139,6 @@
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig
index f8dfd1d..3fcebc6 100644
--- a/configs/am335x_baltos_defconfig
+++ b/configs/am335x_baltos_defconfig
@@ -3,8 +3,6 @@
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_DEFAULT_DEVICE_TREE="am335x-baltos"
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_BALTOS=y
@@ -19,6 +17,7 @@
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="run findfdt; run usbboot;run mmcboot;setenv mmcdev 1; setenv bootpart 1:2; run mmcboot;run nandboot;"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
CONFIG_SPL_FS_EXT4=y
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index cabc181..5dd0b32 100644
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -2,8 +2,6 @@
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_SF_DEFAULT_SPEED=24000000
CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
CONFIG_AM33XX=y
diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig
index 8239f5f..a55aace 100644
--- a/configs/am335x_evm_spiboot_defconfig
+++ b/configs/am335x_evm_spiboot_defconfig
@@ -2,8 +2,6 @@
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_SF_DEFAULT_SPEED=24000000
CONFIG_ENV_OFFSET=0x100000
CONFIG_SPL_DM_SPI=y
diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig
index 7513854..7c7041c 100644
--- a/configs/am335x_guardian_defconfig
+++ b/configs/am335x_guardian_defconfig
@@ -3,8 +3,6 @@
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030fef0
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_OFFSET=0x500000
CONFIG_DEFAULT_DEVICE_TREE="am335x-guardian"
@@ -31,6 +29,7 @@
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ARCH_MISC_INIT=y
+CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig
index 3694cc3..d780239 100644
--- a/configs/am335x_hs_evm_defconfig
+++ b/configs/am335x_hs_evm_defconfig
@@ -3,8 +3,6 @@
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_SECURE_DEVICE=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_SF_DEFAULT_SPEED=24000000
CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
CONFIG_SPL_TEXT_BASE=0x40300350
diff --git a/configs/am335x_hs_evm_spi_defconfig b/configs/am335x_hs_evm_spi_defconfig
new file mode 100644
index 0000000..df00984
--- /dev/null
+++ b/configs/am335x_hs_evm_spi_defconfig
@@ -0,0 +1,26 @@
+#include <configs/am335x_hs_evm_defconfig>
+
+CONFIG_ARM=y
+CONFIG_ARCH_OMAP2PLUS=y
+
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+
+CONFIG_SPI_BOOT=y
+
+CONFIG_SPL_MTD_SUPPORT=y
+
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_EXT4_WRITE=y
+
+CONFIG_BLK=n
+
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_SPL_OF_LIBFDT=y
diff --git a/configs/am335x_hs_evm_uart_defconfig b/configs/am335x_hs_evm_uart_defconfig
index a99b7b4..bd97994 100644
--- a/configs/am335x_hs_evm_uart_defconfig
+++ b/configs/am335x_hs_evm_uart_defconfig
@@ -3,8 +3,6 @@
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_SECURE_DEVICE=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_SF_DEFAULT_SPEED=24000000
CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
CONFIG_SPL_TEXT_BASE=0x40301950
diff --git a/configs/am335x_igep003x_defconfig b/configs/am335x_igep003x_defconfig
index ddffd4f..1994388 100644
--- a/configs/am335x_igep003x_defconfig
+++ b/configs/am335x_igep003x_defconfig
@@ -4,8 +4,6 @@
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x18000
CONFIG_DEFAULT_DEVICE_TREE="am335x-base0033"
CONFIG_AM33XX=y
@@ -76,7 +74,7 @@
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
diff --git a/configs/am335x_pdu001_defconfig b/configs/am335x_pdu001_defconfig
index febe5eb..a0163f1 100644
--- a/configs/am335x_pdu001_defconfig
+++ b/configs/am335x_pdu001_defconfig
@@ -4,8 +4,6 @@
CONFIG_SYS_MALLOC_F_LEN=0x1200
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x4000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-pdu001"
@@ -24,6 +22,7 @@
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_BOOTCOMMAND="run eval_boot_device;part uuid mmc ${mmc_boot}:${root_fs_partition} root_fs_partuuid;setenv bootargs console=${console} vt.global_cursor_default=0 root=PARTUUID=${root_fs_partuuid} rootfstype=ext4 rootwait rootdelay=1;fatload mmc ${mmc_boot} ${fdtaddr} ${fdtfile};fatload mmc ${mmc_boot} ${loadaddr} ${bootfile};bootz ${loadaddr} - ${fdtaddr}"
CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
diff --git a/configs/am335x_shc_defconfig b/configs/am335x_shc_defconfig
index 47c08e5..72933ba 100644
--- a/configs/am335x_shc_defconfig
+++ b/configs/am335x_shc_defconfig
@@ -4,8 +4,6 @@
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x1000
CONFIG_ENV_OFFSET=0x7000
CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
@@ -33,6 +31,7 @@
CONFIG_DEFAULT_FDT_FILE="am335x-shc"
CONFIG_SYS_PBSIZE=1049
CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
@@ -66,10 +65,12 @@
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_SLAVE=0x1
CONFIG_SYS_I2C_SPEED=400000
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
CONFIG_MMC_OMAP_HS=y
CONFIG_HSMMC2_8BIT=y
CONFIG_PHY_ADDR_ENABLE=y
diff --git a/configs/am335x_shc_ict_defconfig b/configs/am335x_shc_ict_defconfig
index c7618c5..b8a3227 100644
--- a/configs/am335x_shc_ict_defconfig
+++ b/configs/am335x_shc_ict_defconfig
@@ -4,8 +4,6 @@
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x1000
CONFIG_ENV_OFFSET=0x7000
CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
@@ -31,6 +29,7 @@
CONFIG_DEFAULT_FDT_FILE="am335x-shc"
CONFIG_SYS_PBSIZE=1049
CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
@@ -64,10 +63,12 @@
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_SLAVE=0x1
CONFIG_SYS_I2C_SPEED=400000
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
CONFIG_MMC_OMAP_HS=y
CONFIG_HSMMC2_8BIT=y
CONFIG_PHY_ADDR_ENABLE=y
diff --git a/configs/am335x_shc_netboot_defconfig b/configs/am335x_shc_netboot_defconfig
index 9342658..b25a4de 100644
--- a/configs/am335x_shc_netboot_defconfig
+++ b/configs/am335x_shc_netboot_defconfig
@@ -4,8 +4,6 @@
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x1000
CONFIG_ENV_OFFSET=0x7000
CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
@@ -34,6 +32,7 @@
CONFIG_DEFAULT_FDT_FILE="am335x-shc"
CONFIG_SYS_PBSIZE=1049
CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
@@ -67,10 +66,12 @@
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_SLAVE=0x1
CONFIG_SYS_I2C_SPEED=400000
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
CONFIG_MMC_OMAP_HS=y
CONFIG_HSMMC2_8BIT=y
CONFIG_PHY_ADDR_ENABLE=y
diff --git a/configs/am335x_shc_sdboot_defconfig b/configs/am335x_shc_sdboot_defconfig
index 439f9b8..8486ccb 100644
--- a/configs/am335x_shc_sdboot_defconfig
+++ b/configs/am335x_shc_sdboot_defconfig
@@ -4,8 +4,6 @@
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x1000
CONFIG_ENV_OFFSET=0x7000
CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
@@ -34,6 +32,7 @@
CONFIG_DEFAULT_FDT_FILE="am335x-shc"
CONFIG_SYS_PBSIZE=1049
CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
@@ -66,10 +65,12 @@
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_SLAVE=0x1
CONFIG_SYS_I2C_SPEED=400000
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
CONFIG_MMC_OMAP_HS=y
CONFIG_HSMMC2_8BIT=y
CONFIG_PHY_ADDR_ENABLE=y
diff --git a/configs/am335x_sl50_defconfig b/configs/am335x_sl50_defconfig
index 88122bd..7444e55 100644
--- a/configs/am335x_sl50_defconfig
+++ b/configs/am335x_sl50_defconfig
@@ -4,8 +4,6 @@
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_OFFSET=0x0
CONFIG_DEFAULT_DEVICE_TREE="am335x-sl50"
CONFIG_AM33XX=y
@@ -24,6 +22,7 @@
CONFIG_AUTOBOOT_DELAY_STR="d"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
CONFIG_SPL_ENV_SUPPORT=y
@@ -66,7 +65,7 @@
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_SYS_BOOTCOUNT_BE=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
CONFIG_MMC_OMAP_HS=y
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index 3236f1d..4eb4066 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -5,15 +5,10 @@
CONFIG_TEXT_BASE=0x80100000
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SOURCE_FILE="am3517evm"
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_DEFAULT_DEVICE_TREE="ti/omap/am3517-evm"
-CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_AM3517_EVM=y
CONFIG_EMIF4=y
-CONFIG_SYS_MONITOR_LEN=262144
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2500
CONFIG_SPL=y
CONFIG_LTO=y
@@ -21,7 +16,6 @@
CONFIG_BOOTDELAY=10
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device $mmcdev; if run loadbootenv; then run importbootenv; fi; echo Checking if uenvcmd is set ...; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; echo Running default loadimage ...; setenv bootfile zImage; if run loadimage; then run loadfdt; run mmcboot; fi; else run nandboot; fi"
CONFIG_SYS_PBSIZE=1054
-CONFIG_SPL_MAX_SIZE=0xec00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig
index d73b1cb..0fc4c0f 100644
--- a/configs/am43xx_evm_defconfig
+++ b/configs/am43xx_evm_defconfig
@@ -3,8 +3,6 @@
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00
CONFIG_SF_DEFAULT_SPEED=48000000
CONFIG_ENV_SIZE=0x10000
CONFIG_DM_GPIO=y
diff --git a/configs/am43xx_evm_qspiboot_defconfig b/configs/am43xx_evm_qspiboot_defconfig
index 89e2125..c538c1a 100644
--- a/configs/am43xx_evm_qspiboot_defconfig
+++ b/configs/am43xx_evm_qspiboot_defconfig
@@ -4,8 +4,6 @@
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TEXT_BASE=0x30000000
CONFIG_SYS_MALLOC_F_LEN=0x400
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00
CONFIG_SF_DEFAULT_SPEED=48000000
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x110000
diff --git a/configs/am43xx_evm_rtconly_defconfig b/configs/am43xx_evm_rtconly_defconfig
index 2ff0119..0fe5479 100644
--- a/configs/am43xx_evm_rtconly_defconfig
+++ b/configs/am43xx_evm_rtconly_defconfig
@@ -3,8 +3,6 @@
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00
CONFIG_SF_DEFAULT_SPEED=48000000
CONFIG_ENV_SIZE=0x10000
CONFIG_DM_GPIO=y
diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig
index 845b686..c4693bc 100644
--- a/configs/am43xx_evm_usbhost_boot_defconfig
+++ b/configs/am43xx_evm_usbhost_boot_defconfig
@@ -2,8 +2,6 @@
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00
CONFIG_SF_DEFAULT_SPEED=48000000
CONFIG_ENV_SIZE=0x10000
CONFIG_DM_GPIO=y
diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig
index ff5073c..980ef13 100644
--- a/configs/am43xx_hs_evm_defconfig
+++ b/configs/am43xx_hs_evm_defconfig
@@ -4,8 +4,6 @@
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_SECURE_DEVICE=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00
CONFIG_SF_DEFAULT_SPEED=48000000
CONFIG_ENV_SIZE=0x10000
CONFIG_DM_GPIO=y
diff --git a/configs/am43xx_hs_evm_qspi_defconfig b/configs/am43xx_hs_evm_qspi_defconfig
index 5ef59d8..75725e1 100644
--- a/configs/am43xx_hs_evm_qspi_defconfig
+++ b/configs/am43xx_hs_evm_qspi_defconfig
@@ -3,8 +3,6 @@
# CONFIG_SYS_THUMB_BUILD is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_SECURE_DEVICE=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00
CONFIG_SF_DEFAULT_SPEED=48000000
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x110000
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index 7c3ceeb..587af53 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -1,9 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4037ff00
CONFIG_SF_DEFAULT_SPEED=76800000
CONFIG_DM_GPIO=y
CONFIG_SPL_DM_SPI=y
diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig
index 1f7eca4..b790897 100644
--- a/configs/am57xx_hs_evm_defconfig
+++ b/configs/am57xx_hs_evm_defconfig
@@ -2,9 +2,6 @@
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_SECURE_DEVICE=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4037ff00
CONFIG_SF_DEFAULT_SPEED=76800000
CONFIG_DM_GPIO=y
CONFIG_SPL_DM_SPI=y
diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig
index 807e1d6..450751b 100644
--- a/configs/am57xx_hs_evm_usb_defconfig
+++ b/configs/am57xx_hs_evm_usb_defconfig
@@ -2,9 +2,6 @@
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_SECURE_DEVICE=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4037ff00
CONFIG_SF_DEFAULT_SPEED=76800000
CONFIG_DM_GPIO=y
CONFIG_SPL_DM_SPI=y
diff --git a/configs/amd_versal2_mini_defconfig b/configs/amd_versal2_mini_defconfig
new file mode 100644
index 0000000..0dd2305
--- /dev/null
+++ b/configs/amd_versal2_mini_defconfig
@@ -0,0 +1,77 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="amd_versal2_mini"
+# CONFIG_ARM64_CRC32 is not set
+CONFIG_COUNTER_FREQUENCY=100000000
+# CONFIG_ARM64_SUPPORT_AARCH32 is not set
+CONFIG_ARCH_VERSAL2=y
+CONFIG_TEXT_BASE=0xBBF00000
+CONFIG_SYS_MALLOC_LEN=0x20000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=3
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xBBF20000
+CONFIG_ENV_SIZE=0x80
+CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
+CONFIG_DEBUG_UART_BASE=0xf1920000
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_SYS_MEM_RSVD_FOR_MMU=y
+# CONFIG_PSCI_RESET is not set
+CONFIG_SYS_LOAD_ADDR=0xBBF80000
+CONFIG_DEBUG_UART=y
+CONFIG_SYS_MEMTEST_START=0x00000000
+CONFIG_SYS_MEMTEST_END=0x00001000
+# CONFIG_EXPERT is not set
+CONFIG_REMAKE_ELF=y
+# CONFIG_LEGACY_IMAGE_FORMAT is not set
+# CONFIG_AUTOBOOT is not set
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_BOARD_LATE_INIT is not set
+# CONFIG_CMDLINE_EDITING is not set
+# CONFIG_AUTO_COMPLETE is not set
+# CONFIG_SYS_LONGHELP is not set
+CONFIG_SYS_PROMPT="versal2> "
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_FDT is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_RUN is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MX_CYCLIC=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_ECHO is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+# CONFIG_CMD_SLEEP is not set
+CONFIG_OF_EMBED=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_NET is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+# CONFIG_GPIO is not set
+# CONFIG_I2C is not set
+# CONFIG_INPUT is not set
+# CONFIG_MMC is not set
+# CONFIG_POWER is not set
+CONFIG_DEBUG_UART_PL011=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_ARM_DCC=y
+CONFIG_PL01X_SERIAL=y
+# CONFIG_GZIP is not set
diff --git a/configs/amd_versal2_mini_emmc_defconfig b/configs/amd_versal2_mini_emmc_defconfig
new file mode 100644
index 0000000..7ad4438
--- /dev/null
+++ b/configs/amd_versal2_mini_emmc_defconfig
@@ -0,0 +1,69 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="amd_versal2_mini"
+CONFIG_COUNTER_FREQUENCY=100000000
+CONFIG_ARCH_VERSAL2=y
+CONFIG_TEXT_BASE=0x10000
+CONFIG_SYS_MALLOC_LEN=0x80000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000
+CONFIG_ENV_SIZE=0x80
+CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
+CONFIG_DEBUG_UART_BASE=0xf1920000
+CONFIG_DEBUG_UART_CLOCK=100000000
+# CONFIG_PSCI_RESET is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
+CONFIG_DEBUG_UART=y
+# CONFIG_EXPERT is not set
+CONFIG_REMAKE_ELF=y
+# CONFIG_AUTOBOOT is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_BOARD_LATE_INIT is not set
+# CONFIG_CMDLINE_EDITING is not set
+# CONFIG_AUTO_COMPLETE is not set
+# CONFIG_SYS_LONGHELP is not set
+CONFIG_SYS_PROMPT="versal2> "
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTM is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_FDT is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_RUN is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_ECHO is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_EMBED=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_NET is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_DEBUG_UART_PL011=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_ARM_DCC=y
+CONFIG_PL01X_SERIAL=y
+CONFIG_FAT_WRITE=y
+# CONFIG_GZIP is not set
+# CONFIG_EFI_LOADER is not set
+# CONFIG_LMB is not set
diff --git a/configs/amd_versal2_mini_ospi_defconfig b/configs/amd_versal2_mini_ospi_defconfig
new file mode 100644
index 0000000..2242960
--- /dev/null
+++ b/configs/amd_versal2_mini_ospi_defconfig
@@ -0,0 +1,84 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="amd_versal2_mini"
+# CONFIG_ARM64_CRC32 is not set
+CONFIG_COUNTER_FREQUENCY=100000000
+# CONFIG_ARM64_SUPPORT_AARCH32 is not set
+CONFIG_ARCH_VERSAL2=y
+CONFIG_TEXT_BASE=0xBBF00000
+CONFIG_SYS_MALLOC_LEN=0x20000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=3
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xBBF20000
+CONFIG_ENV_SIZE=0x80
+CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
+CONFIG_DEBUG_UART_BASE=0xf1920000
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_SYS_MEM_RSVD_FOR_MMU=y
+# CONFIG_PSCI_RESET is not set
+CONFIG_SYS_LOAD_ADDR=0xBBF80000
+CONFIG_DEBUG_UART=y
+# CONFIG_EXPERT is not set
+CONFIG_REMAKE_ELF=y
+# CONFIG_LEGACY_IMAGE_FORMAT is not set
+# CONFIG_AUTOBOOT is not set
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_BOARD_LATE_INIT is not set
+# CONFIG_CMDLINE_EDITING is not set
+# CONFIG_AUTO_COMPLETE is not set
+# CONFIG_SYS_LONGHELP is not set
+CONFIG_SYS_PROMPT="versal2> "
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_FDT is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_RUN is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_ECHO is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+# CONFIG_CMD_SLEEP is not set
+CONFIG_OF_EMBED=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_NET is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+# CONFIG_GPIO is not set
+# CONFIG_I2C is not set
+# CONFIG_INPUT is not set
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SOFT_RESET=y
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
+# CONFIG_SPI_FLASH_LOCK is not set
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MT35XU=y
+# CONFIG_POWER is not set
+CONFIG_DEBUG_UART_PL011=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_ARM_DCC=y
+CONFIG_PL01X_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_HAS_CQSPI_REF_CLK=y
+CONFIG_CQSPI_REF_CLK=200000000
+CONFIG_CADENCE_OSPI_VERSAL=y
+# CONFIG_GZIP is not set
diff --git a/configs/amd_versal2_mini_qspi_defconfig b/configs/amd_versal2_mini_qspi_defconfig
new file mode 100644
index 0000000..3360c15
--- /dev/null
+++ b/configs/amd_versal2_mini_qspi_defconfig
@@ -0,0 +1,79 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="amd_versal2_mini"
+# CONFIG_ARM64_CRC32 is not set
+CONFIG_COUNTER_FREQUENCY=100000000
+# CONFIG_ARM64_SUPPORT_AARCH32 is not set
+CONFIG_ARCH_VERSAL2=y
+CONFIG_TEXT_BASE=0xBBF00000
+CONFIG_SYS_MALLOC_LEN=0x20000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=3
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xBBF20000
+CONFIG_ENV_SIZE=0x80
+CONFIG_DEFAULT_DEVICE_TREE="amd-versal2-mini"
+CONFIG_DEBUG_UART_BASE=0xf1920000
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_SYS_MEM_RSVD_FOR_MMU=y
+# CONFIG_PSCI_RESET is not set
+CONFIG_SYS_LOAD_ADDR=0xBBF80000
+CONFIG_DEBUG_UART=y
+# CONFIG_EXPERT is not set
+CONFIG_REMAKE_ELF=y
+# CONFIG_LEGACY_IMAGE_FORMAT is not set
+# CONFIG_AUTOBOOT is not set
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_BOARD_LATE_INIT is not set
+# CONFIG_CMDLINE_EDITING is not set
+# CONFIG_AUTO_COMPLETE is not set
+# CONFIG_SYS_LONGHELP is not set
+CONFIG_SYS_PROMPT="versal2> "
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_FDT is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_RUN is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_ECHO is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+# CONFIG_CMD_SLEEP is not set
+CONFIG_OF_EMBED=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_NET is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+# CONFIG_GPIO is not set
+# CONFIG_I2C is not set
+# CONFIG_INPUT is not set
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+# CONFIG_SPI_FLASH_LOCK is not set
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+# CONFIG_POWER is not set
+CONFIG_DEBUG_UART_PL011=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_ARM_DCC=y
+CONFIG_PL01X_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
+# CONFIG_GZIP is not set
diff --git a/configs/amd_versal2_virt_defconfig b/configs/amd_versal2_virt_defconfig
index 2d611f8..c4bf771 100644
--- a/configs/amd_versal2_virt_defconfig
+++ b/configs/amd_versal2_virt_defconfig
@@ -46,6 +46,7 @@
CONFIG_BOOTP_MAY_FAIL=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_NFS=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EFIDEBUG=y
CONFIG_CMD_TIME=y
@@ -59,6 +60,7 @@
CONFIG_CMD_SQUASHFS=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
+CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_BOARD=y
CONFIG_DTB_RESELECT=y
@@ -119,7 +121,6 @@
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_ARM_DCC=y
CONFIG_PL01X_SERIAL=y
-CONFIG_XILINX_UARTLITE=y
CONFIG_SOC_DEVICE=y
CONFIG_SOC_AMD_VERSAL2=y
CONFIG_SPI=y
diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig
index 0b2ee74..8947b76 100644
--- a/configs/brppt1_mmc_defconfig
+++ b/configs/brppt1_mmc_defconfig
@@ -6,8 +6,6 @@
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x40000
CONFIG_DM_GPIO=y
@@ -39,6 +37,7 @@
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x500000
diff --git a/configs/brsmarc1_defconfig b/configs/brsmarc1_defconfig
index f584b8d..dc868b7 100644
--- a/configs/brsmarc1_defconfig
+++ b/configs/brsmarc1_defconfig
@@ -4,8 +4,6 @@
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_SF_DEFAULT_SPEED=24000000
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x20000
@@ -39,6 +37,7 @@
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
+CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
diff --git a/configs/brxre1_defconfig b/configs/brxre1_defconfig
index 6c27f07..fc801f2 100644
--- a/configs/brxre1_defconfig
+++ b/configs/brxre1_defconfig
@@ -4,8 +4,6 @@
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x40000
CONFIG_DM_GPIO=y
@@ -35,6 +33,7 @@
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x500000
diff --git a/configs/chiliboard_defconfig b/configs/chiliboard_defconfig
index c574d93..8cb6b34 100644
--- a/configs/chiliboard_defconfig
+++ b/configs/chiliboard_defconfig
@@ -3,8 +3,6 @@
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030fef0
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x20000
CONFIG_DM_GPIO=y
@@ -24,6 +22,7 @@
CONFIG_DEFAULT_FDT_FILE="am335x-chiliboard.dtb"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ARCH_MISC_INIT=y
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
CONFIG_SPL_I2C=y
@@ -53,7 +52,7 @@
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_SYS_BOOTCOUNT_BE=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_MISC=y
CONFIG_MMC_OMAP_HS=y
diff --git a/configs/cm3588-nas-rk3588_defconfig b/configs/cm3588-nas-rk3588_defconfig
new file mode 100644
index 0000000..d6d8275
--- /dev/null
+++ b/configs/cm3588-nas-rk3588_defconfig
@@ -0,0 +1,90 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-friendlyelec-cm3588-nas"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_CM3588_NAS_RK3588=y
+CONFIG_DEBUG_UART_BASE=0xFEB50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-friendlyelec-cm3588-nas.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_ADC=y
+CONFIG_BUTTON_GPIO=y
+CONFIG_SPL_CLK=y
+# CONFIG_USB_FUNCTION_FASTBOOT is not set
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHYLIB=y
+CONFIG_RTL8169=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_PHY_ROCKCHIP_USBDP=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
+CONFIG_ERRNO_STR=y
diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
index 386616c..81a39f7 100644
--- a/configs/cm_fx6_defconfig
+++ b/configs/cm_fx6_defconfig
@@ -80,7 +80,7 @@
CONFIG_DWC_AHSATA=y
# CONFIG_DWC_AHSATA_AHCI is not set
CONFIG_LBA48=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MXC=y
CONFIG_SYS_MXC_I2C3_SPEED=400000
diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig
index 32f126a..eabeee8 100644
--- a/configs/cm_t43_defconfig
+++ b/configs/cm_t43_defconfig
@@ -5,8 +5,6 @@
CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4033ff00
CONFIG_SF_DEFAULT_SPEED=48000000
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0xC0000
@@ -38,6 +36,7 @@
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x480
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C=y
+# CONFIG_SPL_DM_I2C is not set
CONFIG_SPL_MTD=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_NAND_DRIVERS=y
@@ -72,7 +71,7 @@
CONFIG_VERSION_VARIABLE=y
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_SYS_RX_ETH_BUFFER=64
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_MMC_OMAP_HS=y
CONFIG_HSMMC2_8BIT=y
diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig
index 7653fbb..33201ce 100644
--- a/configs/devkit8000_defconfig
+++ b/configs/devkit8000_defconfig
@@ -3,13 +3,8 @@
CONFIG_TEXT_BASE=0x80100000
CONFIG_SYS_MALLOC_LEN=0x40000
CONFIG_SYS_MALLOC_F_LEN=0x4000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_DEFAULT_DEVICE_TREE="omap3-devkit8000"
-CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_DEVKIT8000=y
-CONFIG_SYS_MONITOR_LEN=262144
CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL_BSS_START_ADDR=0x80000500
CONFIG_SPL=y
@@ -17,7 +12,6 @@
CONFIG_BOOTCOMMAND="run autoboot"
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_SPL_MAX_SIZE=0xec00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index 0cea550..6264d9f 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -2,9 +2,6 @@
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SYS_MALLOC_F_LEN=0x18000
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4037fef0
CONFIG_SF_DEFAULT_SPEED=76800000
CONFIG_DM_GPIO=y
CONFIG_SPL_DM_SPI=y
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index 5f56b18..4e79297 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -3,9 +3,6 @@
CONFIG_TI_SECURE_DEVICE=y
CONFIG_SYS_MALLOC_F_LEN=0x18000
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4037fef0
CONFIG_SF_DEFAULT_SPEED=76800000
CONFIG_DM_GPIO=y
CONFIG_SPL_DM_SPI=y
diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig
index 5b67a0e..68d342b 100644
--- a/configs/dra7xx_hs_evm_usb_defconfig
+++ b/configs/dra7xx_hs_evm_usb_defconfig
@@ -3,9 +3,6 @@
CONFIG_TI_SECURE_DEVICE=y
CONFIG_SYS_MALLOC_F_LEN=0x18000
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4037fef0
CONFIG_SF_DEFAULT_SPEED=76800000
CONFIG_DM_GPIO=y
CONFIG_SPL_DM_SPI=y
diff --git a/configs/draco-etamin_defconfig b/configs/draco-etamin_defconfig
index ba3f381..78ee5c1 100644
--- a/configs/draco-etamin_defconfig
+++ b/configs/draco-etamin_defconfig
@@ -5,8 +5,6 @@
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x980000
CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
diff --git a/configs/draco-rastaban_defconfig b/configs/draco-rastaban_defconfig
index 43d29f5..81a349b 100644
--- a/configs/draco-rastaban_defconfig
+++ b/configs/draco-rastaban_defconfig
@@ -5,8 +5,6 @@
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
CONFIG_AM33XX=y
diff --git a/configs/draco-thuban_defconfig b/configs/draco-thuban_defconfig
index b457b22..265c113 100644
--- a/configs/draco-thuban_defconfig
+++ b/configs/draco-thuban_defconfig
@@ -5,8 +5,6 @@
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
CONFIG_AM33XX=y
diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig
index cc2f567..004f186 100644
--- a/configs/ethernut5_defconfig
+++ b/configs/ethernut5_defconfig
@@ -46,7 +46,6 @@
CONFIG_CMD_DNS=y
CONFIG_CMD_BSP=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_CMD_JFFS2=y
diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
index 4738916..f1d9bb3 100644
--- a/configs/igep00x0_defconfig
+++ b/configs/igep00x0_defconfig
@@ -4,14 +4,9 @@
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_ENV_SIZE=0x8000
CONFIG_DEFAULT_DEVICE_TREE="ti/omap/omap3-igep0020"
-CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_OMAP3_IGEP00X0=y
-CONFIG_SYS_MONITOR_LEN=262144
CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
@@ -22,7 +17,6 @@
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL_MAX_SIZE=0xec00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
diff --git a/configs/imx8ulp_evk_defconfig b/configs/imx8ulp_evk_defconfig
index b302df1..0f0748b 100644
--- a/configs/imx8ulp_evk_defconfig
+++ b/configs/imx8ulp_evk_defconfig
@@ -8,7 +8,7 @@
CONFIG_SF_DEFAULT_SPEED=40000000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x400000
-CONFIG_IMX_CONFIG=""
+CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx8ulp/imximage.cfg"
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx8ulp-evk"
CONFIG_SPL_TEXT_BASE=0x22020000
@@ -38,6 +38,7 @@
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx8ulp/container.cfg"
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig
index 8d6cb24..f201a175 100644
--- a/configs/k2e_evm_defconfig
+++ b/configs/k2e_evm_defconfig
@@ -18,7 +18,7 @@
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_OFFSET=0x100000
CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="keystone-k2e-evm"
+CONFIG_DEFAULT_DEVICE_TREE="ti/keystone/keystone-k2e-evm"
CONFIG_SPL_TEXT_BASE=0xC100000
CONFIG_SPL_SERIAL=y
CONFIG_SPL_STACK=0xc1223f4
@@ -99,3 +99,4 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
+CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig
index e3c0ae1..46501d5 100644
--- a/configs/k2e_hs_evm_defconfig
+++ b/configs/k2e_hs_evm_defconfig
@@ -15,7 +15,7 @@
CONFIG_SF_DEFAULT_SPEED=30000000
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_OFFSET=0x100000
-CONFIG_DEFAULT_DEVICE_TREE="keystone-k2e-evm"
+CONFIG_DEFAULT_DEVICE_TREE="ti/keystone/keystone-k2e-evm"
CONFIG_TIMESTAMP=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_BOARD_SETUP=y
@@ -73,3 +73,4 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
+CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig
index 5d54d75..57a3d36 100644
--- a/configs/k2g_evm_defconfig
+++ b/configs/k2g_evm_defconfig
@@ -17,7 +17,7 @@
CONFIG_SF_DEFAULT_SPEED=30000000
CONFIG_ENV_SIZE=0x40000
CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="keystone-k2g-evm"
+CONFIG_DEFAULT_DEVICE_TREE="ti/keystone/keystone-k2g-evm"
CONFIG_SPL_TEXT_BASE=0xC0A0000
CONFIG_SPL_SERIAL=y
CONFIG_SPL_STACK=0xc0c23f4
@@ -57,7 +57,7 @@
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_LIST="keystone-k2g-generic keystone-k2g-evm keystone-k2g-ice"
+CONFIG_OF_LIST="ti/keystone/keystone-k2g-evm ti/keystone/keystone-k2g-ice"
CONFIG_DTB_RESELECT=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_OVERWRITE=y
@@ -109,3 +109,4 @@
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_FUNCTION_SDP=y
+CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2g_hs_evm_defconfig b/configs/k2g_hs_evm_defconfig
index 9adab3a..392ec5b 100644
--- a/configs/k2g_hs_evm_defconfig
+++ b/configs/k2g_hs_evm_defconfig
@@ -14,7 +14,7 @@
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc09ff10
CONFIG_SF_DEFAULT_SPEED=30000000
CONFIG_ENV_SIZE=0x40000
-CONFIG_DEFAULT_DEVICE_TREE="keystone-k2g-evm"
+CONFIG_DEFAULT_DEVICE_TREE="ti/keystone/keystone-k2g-evm"
CONFIG_TIMESTAMP=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_BOARD_SETUP=y
@@ -33,7 +33,7 @@
CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
-CONFIG_OF_LIST="keystone-k2g-generic keystone-k2g-evm keystone-k2g-ice"
+CONFIG_OF_LIST="ti/keystone/keystone-k2g-evm ti/keystone/keystone-k2g-ice"
CONFIG_DTB_RESELECT=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_OVERWRITE=y
@@ -84,3 +84,4 @@
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_FUNCTION_SDP=y
+CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig
index 4da75d1..2e29b2f 100644
--- a/configs/k2hk_evm_defconfig
+++ b/configs/k2hk_evm_defconfig
@@ -18,7 +18,7 @@
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_OFFSET=0x100000
CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="keystone-k2hk-evm"
+CONFIG_DEFAULT_DEVICE_TREE="ti/keystone/keystone-k2hk-evm"
CONFIG_SPL_TEXT_BASE=0xC200000
CONFIG_SPL_SERIAL=y
CONFIG_SPL_STACK=0xc2223f4
@@ -100,3 +100,4 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
+CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2hk_hs_evm_defconfig b/configs/k2hk_hs_evm_defconfig
index 1a24d71..cf299f2 100644
--- a/configs/k2hk_hs_evm_defconfig
+++ b/configs/k2hk_hs_evm_defconfig
@@ -15,7 +15,7 @@
CONFIG_SF_DEFAULT_SPEED=30000000
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_OFFSET=0x100000
-CONFIG_DEFAULT_DEVICE_TREE="keystone-k2hk-evm"
+CONFIG_DEFAULT_DEVICE_TREE="ti/keystone/keystone-k2hk-evm"
CONFIG_TIMESTAMP=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_BOARD_SETUP=y
@@ -74,3 +74,4 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
+CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig
index c4534f0..0cadece 100644
--- a/configs/k2l_evm_defconfig
+++ b/configs/k2l_evm_defconfig
@@ -18,7 +18,7 @@
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_OFFSET=0x100000
CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="keystone-k2l-evm"
+CONFIG_DEFAULT_DEVICE_TREE="ti/keystone/keystone-k2l-evm"
CONFIG_SPL_TEXT_BASE=0xC100000
CONFIG_SPL_SERIAL=y
CONFIG_SPL_STACK=0xc1223f4
@@ -100,3 +100,4 @@
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
+CONFIG_OF_UPSTREAM=y
diff --git a/configs/k2l_hs_evm_defconfig b/configs/k2l_hs_evm_defconfig
index c874349..5496049 100644
--- a/configs/k2l_hs_evm_defconfig
+++ b/configs/k2l_hs_evm_defconfig
@@ -15,7 +15,7 @@
CONFIG_SF_DEFAULT_SPEED=30000000
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_OFFSET=0x100000
-CONFIG_DEFAULT_DEVICE_TREE="keystone-k2l-evm"
+CONFIG_DEFAULT_DEVICE_TREE="ti/keystone/keystone-k2l-evm"
CONFIG_TIMESTAMP=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTCOMMAND=y
@@ -78,3 +78,4 @@
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_STORAGE=y
+CONFIG_OF_UPSTREAM=y
diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig
index 06e4154..0066414 100644
--- a/configs/ls2080aqds_nand_defconfig
+++ b/configs/ls2080aqds_nand_defconfig
@@ -61,7 +61,6 @@
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
# CONFIG_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig
index 0b54bc9..44a1459 100644
--- a/configs/ls2080aqds_qspi_defconfig
+++ b/configs/ls2080aqds_qspi_defconfig
@@ -43,7 +43,6 @@
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
# CONFIG_ISO_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig
index f1009e1..cbc8d6a 100644
--- a/configs/ls2080ardb_nand_defconfig
+++ b/configs/ls2080ardb_nand_defconfig
@@ -68,7 +68,6 @@
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
diff --git a/configs/malta64_defconfig b/configs/malta64_defconfig
index ff371da..8ac29b9 100644
--- a/configs/malta64_defconfig
+++ b/configs/malta64_defconfig
@@ -27,7 +27,6 @@
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
# CONFIG_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_SYS_IDE_MAXBUS=1
diff --git a/configs/malta64el_defconfig b/configs/malta64el_defconfig
index 5b130bc..0a71013 100644
--- a/configs/malta64el_defconfig
+++ b/configs/malta64el_defconfig
@@ -29,7 +29,6 @@
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
# CONFIG_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_SYS_IDE_MAXBUS=1
diff --git a/configs/malta_defconfig b/configs/malta_defconfig
index ce917a6..355292e 100644
--- a/configs/malta_defconfig
+++ b/configs/malta_defconfig
@@ -26,7 +26,6 @@
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
# CONFIG_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_SYS_IDE_MAXBUS=1
diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig
index de29a7a..ffd2771 100644
--- a/configs/maltael_defconfig
+++ b/configs/maltael_defconfig
@@ -28,7 +28,6 @@
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
# CONFIG_ISO_PARTITION is not set
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_SYS_IDE_MAXBUS=1
diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig
index 1fe68ef..dddb57e 100644
--- a/configs/mx28evk_defconfig
+++ b/configs/mx28evk_defconfig
@@ -32,7 +32,6 @@
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig
index e5178fb..5932a15 100644
--- a/configs/mx51evk_defconfig
+++ b/configs/mx51evk_defconfig
@@ -31,7 +31,6 @@
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
diff --git a/configs/nanopi-r5c-rk3568_defconfig b/configs/nanopi-r5c-rk3568_defconfig
index 4a6c320..8e30093 100644
--- a/configs/nanopi-r5c-rk3568_defconfig
+++ b/configs/nanopi-r5c-rk3568_defconfig
@@ -35,7 +35,6 @@
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-CONFIG_SPL_DM_WARN=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_SYSCON=y
diff --git a/configs/nanopi-r5s-rk3568_defconfig b/configs/nanopi-r5s-rk3568_defconfig
index 7ab12e6..e1865b2 100644
--- a/configs/nanopi-r5s-rk3568_defconfig
+++ b/configs/nanopi-r5s-rk3568_defconfig
@@ -35,7 +35,6 @@
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-CONFIG_SPL_DM_WARN=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_SYSCON=y
diff --git a/configs/novena_defconfig b/configs/novena_defconfig
index 322689e..dd3541b 100644
--- a/configs/novena_defconfig
+++ b/configs/novena_defconfig
@@ -67,7 +67,7 @@
CONFIG_BOUNCE_BUFFER=y
CONFIG_DWC_AHSATA=y
CONFIG_LBA48=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MXC=y
CONFIG_FSL_USDHC=y
diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig
index 23b2e50..843b61d 100644
--- a/configs/omap35_logic_defconfig
+++ b/configs/omap35_logic_defconfig
@@ -6,14 +6,9 @@
CONFIG_SYS_MALLOC_F_LEN=0x3000
CONFIG_TI_COMMON_CMD_OPTIONS=y
# CONFIG_SPL_GPIO is not set
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_DEFAULT_DEVICE_TREE="ti/omap/logicpd-torpedo-35xx-devkit"
-CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_OMAP3_LOGIC=y
# CONFIG_SPL_OMAP3_ID_NAND is not set
-CONFIG_SYS_MONITOR_LEN=262144
CONFIG_SPL=y
CONFIG_LTO=y
CONFIG_ANDROID_BOOT_IMAGE=y
@@ -24,7 +19,6 @@
CONFIG_DEFAULT_FDT_FILE="logicpd-torpedo-35xx-devkit.dtb"
CONFIG_SYS_PBSIZE=1054
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_SPL_MAX_SIZE=0xec00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig
index a5f242f..bbd1b74 100644
--- a/configs/omap35_logic_somlv_defconfig
+++ b/configs/omap35_logic_somlv_defconfig
@@ -6,14 +6,9 @@
CONFIG_SYS_MALLOC_F_LEN=0x3000
CONFIG_TI_COMMON_CMD_OPTIONS=y
# CONFIG_SPL_GPIO is not set
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_DEFAULT_DEVICE_TREE="ti/omap/logicpd-som-lv-35xx-devkit"
-CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_OMAP3_LOGIC=y
# CONFIG_SPL_OMAP3_ID_NAND is not set
-CONFIG_SYS_MONITOR_LEN=262144
CONFIG_SPL=y
CONFIG_LTO=y
CONFIG_SYS_MONITOR_BASE=0x10000000
@@ -25,7 +20,6 @@
CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-35xx-devkit.dtb"
CONFIG_SYS_PBSIZE=1054
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_SPL_MAX_SIZE=0xec00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig
index 3c8d974..cc0b61a 100644
--- a/configs/omap3_evm_defconfig
+++ b/configs/omap3_evm_defconfig
@@ -3,13 +3,8 @@
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_DEFAULT_DEVICE_TREE="omap3-evm"
-CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_OMAP3_EVM=y
-CONFIG_SYS_MONITOR_LEN=262144
CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
@@ -18,7 +13,6 @@
CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb"
CONFIG_SYS_PBSIZE=1053
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_SPL_MAX_SIZE=0xec00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
index d081d4e..ed04386 100644
--- a/configs/omap3_logic_defconfig
+++ b/configs/omap3_logic_defconfig
@@ -6,14 +6,9 @@
CONFIG_SYS_MALLOC_F_LEN=0x3000
CONFIG_TI_COMMON_CMD_OPTIONS=y
# CONFIG_SPL_GPIO is not set
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_DEFAULT_DEVICE_TREE="ti/omap/logicpd-torpedo-37xx-devkit"
-CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_OMAP3_LOGIC=y
# CONFIG_SPL_OMAP3_ID_NAND is not set
-CONFIG_SYS_MONITOR_LEN=262144
CONFIG_SPL=y
CONFIG_LTO=y
CONFIG_ANDROID_BOOT_IMAGE=y
@@ -23,7 +18,6 @@
CONFIG_PREBOOT="setenv preboot;saveenv;"
CONFIG_SYS_PBSIZE=1054
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_SPL_MAX_SIZE=0xec00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig
index 68e89d2..c5d76d0 100644
--- a/configs/omap3_logic_somlv_defconfig
+++ b/configs/omap3_logic_somlv_defconfig
@@ -6,14 +6,9 @@
CONFIG_SYS_MALLOC_F_LEN=0x3000
CONFIG_TI_COMMON_CMD_OPTIONS=y
# CONFIG_SPL_GPIO is not set
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_DEFAULT_DEVICE_TREE="ti/omap/logicpd-som-lv-37xx-devkit"
-CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_OMAP3_LOGIC=y
# CONFIG_SPL_OMAP3_ID_NAND is not set
-CONFIG_SYS_MONITOR_LEN=262144
CONFIG_SPL=y
CONFIG_LTO=y
CONFIG_SYS_MONITOR_BASE=0x10000000
@@ -25,7 +20,6 @@
CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-37xx-devkit.dtb"
CONFIG_SYS_PBSIZE=1054
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_SPL_MAX_SIZE=0xec00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
diff --git a/configs/orangepi-3b-rk3566_defconfig b/configs/orangepi-3b-rk3566_defconfig
new file mode 100644
index 0000000..575dc43
--- /dev/null
+++ b/configs/orangepi-3b-rk3566_defconfig
@@ -0,0 +1,98 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SPL_GPIO=y
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_SF_DEFAULT_MODE=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="rk3566-orangepi-3b"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_ORANGEPI_3B_RK3566=y
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-orangepi-3b.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+# CONFIG_OF_UPSTREAM is not set
+CONFIG_OF_LIST="rk3566-orangepi-3b rk3566-orangepi-3b-v1.1 rk3566-orangepi-3b-v2.1"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SF_DEFAULT_BUS=4
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_XMC=y
+CONFIG_PHY_MOTORCOMM=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_FAN53555=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SFC=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_ERRNO_STR=y
diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig
index 7846981..a4e467f 100644
--- a/configs/pcm051_rev3_defconfig
+++ b/configs/pcm051_rev3_defconfig
@@ -3,8 +3,6 @@
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_SF_DEFAULT_SPEED=24000000
CONFIG_DEFAULT_DEVICE_TREE="am335x-wega-rdk"
CONFIG_AM33XX=y
diff --git a/configs/phycore-am335x-r2-regor_defconfig b/configs/phycore-am335x-r2-regor_defconfig
index ac638c4..d5056cc 100644
--- a/configs/phycore-am335x-r2-regor_defconfig
+++ b/configs/phycore-am335x-r2-regor_defconfig
@@ -4,8 +4,6 @@
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_OFFSET=0xA0000
CONFIG_DEFAULT_DEVICE_TREE="am335x-regor-rdk"
CONFIG_AM33XX=y
diff --git a/configs/phycore-am335x-r2-wega_defconfig b/configs/phycore-am335x-r2-wega_defconfig
index 98c6217..5813d10 100644
--- a/configs/phycore-am335x-r2-wega_defconfig
+++ b/configs/phycore-am335x-r2-wega_defconfig
@@ -4,8 +4,6 @@
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_OFFSET=0xA0000
CONFIG_DEFAULT_DEVICE_TREE="am335x-wega-rdk"
CONFIG_AM33XX=y
diff --git a/configs/pinetab2-rk3566_defconfig b/configs/pinetab2-rk3566_defconfig
index e46acf3..2d075d1 100644
--- a/configs/pinetab2-rk3566_defconfig
+++ b/configs/pinetab2-rk3566_defconfig
@@ -5,7 +5,7 @@
CONFIG_SPL_GPIO=y
CONFIG_SF_DEFAULT_SPEED=24000000
CONFIG_SF_DEFAULT_MODE=0x1000
-CONFIG_DEFAULT_DEVICE_TREE="rk3566-pinetab2-v2.0"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-pinetab2-v2.0"
CONFIG_ROCKCHIP_RK3568=y
CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
CONFIG_ROCKCHIP_SPI_IMAGE=y
@@ -47,8 +47,7 @@
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
-# CONFIG_OF_UPSTREAM is not set
-CONFIG_OF_LIST="rk3566-pinetab2-v0.1 rk3566-pinetab2-v2.0"
+CONFIG_OF_LIST="rockchip/rk3566-pinetab2-v0.1 rockchip/rk3566-pinetab2-v2.0"
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_REGMAP=y
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index 9e5499a..ccc7f35 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -19,6 +19,7 @@
CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEBUG_UART=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
+CONFIG_CONSOLE_MUX=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x2e000
CONFIG_SPL_PAD_TO=0x38000
@@ -40,7 +41,6 @@
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
@@ -102,12 +102,4 @@
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_RTL8152=y
CONFIG_USB_ETHER_SMSC95XX=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_BPP8 is not set
-CONFIG_DISPLAY=y
-CONFIG_VIDEO_ROCKCHIP=y
-CONFIG_DISPLAY_ROCKCHIP_HDMI=y
-CONFIG_BMP_16BPP=y
-CONFIG_BMP_24BPP=y
-CONFIG_BMP_32BPP=y
CONFIG_ERRNO_STR=y
diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig
index c2f8693..30946b8 100644
--- a/configs/pxm2_defconfig
+++ b/configs/pxm2_defconfig
@@ -6,8 +6,6 @@
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x2000
CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-pxm50"
diff --git a/configs/qemu_arm64_defconfig b/configs/qemu_arm64_defconfig
index 7e166f4..088ba39 100644
--- a/configs/qemu_arm64_defconfig
+++ b/configs/qemu_arm64_defconfig
@@ -33,6 +33,7 @@
CONFIG_CMD_DFU=y
CONFIG_CMD_MTD=y
CONFIG_CMD_PCI=y
+CONFIG_CMD_EFIDEBUG=y
CONFIG_CMD_TPM=y
CONFIG_CMD_MTDPARTS=y
CONFIG_ENV_IS_IN_FLASH=y
@@ -68,3 +69,4 @@
CONFIG_USB_EHCI_PCI=y
CONFIG_SEMIHOSTING=y
CONFIG_TPM=y
+CONFIG_EFI_HTTP_BOOT=y
diff --git a/configs/radxa-zero-3-rk3566_defconfig b/configs/radxa-zero-3-rk3566_defconfig
new file mode 100644
index 0000000..7606edf
--- /dev/null
+++ b/configs/radxa-zero-3-rk3566_defconfig
@@ -0,0 +1,85 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SPL_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-radxa-zero-3w"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_RADXA_ZERO_3_RK3566=y
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-radxa-zero-3w.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_POWER=y
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_LIST="rockchip/rk3566-radxa-zero-3w rockchip/rk3566-radxa-zero-3e"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_ADC=y
+CONFIG_SPL_CLK=y
+# CONFIG_USB_FUNCTION_FASTBOOT is not set
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_FAN53555=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_SPL_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
+CONFIG_ERRNO_STR=y
diff --git a/configs/rock-3b-rk3568_defconfig b/configs/rock-3b-rk3568_defconfig
new file mode 100644
index 0000000..9377968
--- /dev/null
+++ b/configs/rock-3b-rk3568_defconfig
@@ -0,0 +1,100 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_SF_DEFAULT_MODE=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-rock-3b"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SPL_SERIAL=y
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-rock-3b.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
+CONFIG_SPL_CLK=y
+# CONFIG_USB_FUNCTION_FASTBOOT is not set
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SF_DEFAULT_BUS=4
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_XTX=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_FAN53555=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SFC=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
+CONFIG_ERRNO_STR=y
diff --git a/configs/rock-3c-rk3566_defconfig b/configs/rock-3c-rk3566_defconfig
new file mode 100644
index 0000000..f44b202
--- /dev/null
+++ b/configs/rock-3c-rk3566_defconfig
@@ -0,0 +1,97 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_SF_DEFAULT_MODE=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-rock-3c"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SPL_SERIAL=y
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-rock-3c.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
+CONFIG_SPL_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SF_DEFAULT_BUS=4
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_XTX=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_ROCKCHIP=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SFC=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_ERRNO_STR=y
diff --git a/configs/rock-5-itx-rk3588_defconfig b/configs/rock-5-itx-rk3588_defconfig
new file mode 100644
index 0000000..bb9f148
--- /dev/null
+++ b/configs/rock-5-itx-rk3588_defconfig
@@ -0,0 +1,111 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_SF_DEFAULT_MODE=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-rock-5-itx"
+CONFIG_ROCKCHIP_RK3588=y
+CONFIG_ROCKCHIP_SPI_IMAGE=y
+CONFIG_SPL_SERIAL=y
+CONFIG_TARGET_ROCK5B_RK3588=y
+CONFIG_DEBUG_UART_BASE=0xFEB50000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-rock-5-itx.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_AHCI_PCI=y
+CONFIG_DWC_AHCI=y
+CONFIG_SPL_CLK=y
+# CONFIG_USB_FUNCTION_FASTBOOT is not set
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SF_DEFAULT_BUS=5
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_XTX=y
+CONFIG_PHYLIB=y
+CONFIG_RTL8169=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
+CONFIG_PHY_ROCKCHIP_USBDP=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_SPL_RAM=y
+CONFIG_SCSI=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_ROCKCHIP_SFC=y
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_LAN75XX=y
+CONFIG_USB_ETHER_LAN78XX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
+CONFIG_ERRNO_STR=y
diff --git a/configs/rock-pi-s-rk3308_defconfig b/configs/rock-pi-s-rk3308_defconfig
index e450a06..54f7744 100644
--- a/configs/rock-pi-s-rk3308_defconfig
+++ b/configs/rock-pi-s-rk3308_defconfig
@@ -38,10 +38,14 @@
# CONFIG_USB_FUNCTION_FASTBOOT is not set
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_PHY_REALTEK=y
+CONFIG_DM_MDIO=y
CONFIG_DM_ETH_PHY=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
diff --git a/configs/rock-s0-rk3308_defconfig b/configs/rock-s0-rk3308_defconfig
new file mode 100644
index 0000000..074ec4c
--- /dev/null
+++ b/configs/rock-s0-rk3308_defconfig
@@ -0,0 +1,72 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3308-rock-s0"
+CONFIG_DM_RESET=y
+CONFIG_ROCKCHIP_RK3308=y
+CONFIG_TARGET_EVB_RK3308=y
+CONFIG_DEBUG_UART_BASE=0xFF0A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+# CONFIG_DEBUG_UART_BOARD_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART=y
+CONFIG_ANDROID_BOOT_IMAGE=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3308-rock-s0.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_MAX_SIZE=0x40000
+CONFIG_SPL_PAD_TO=0x7f8000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_RNG=y
+CONFIG_CMD_KASLRSEED=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+# CONFIG_USB_FUNCTION_FASTBOOT is not set
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PINCTRL=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSINFO=y
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
+CONFIG_LZO=y
+CONFIG_ERRNO_STR=y
diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-rk3588_defconfig
index fc118ce..80a2f2f 100644
--- a/configs/rock5b-rk3588_defconfig
+++ b/configs/rock5b-rk3588_defconfig
@@ -39,6 +39,7 @@
CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
CONFIG_CMD_ROCKUSB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
diff --git a/configs/rut_defconfig b/configs/rut_defconfig
index 7e78f1d..2bcbdd6 100644
--- a/configs/rut_defconfig
+++ b/configs/rut_defconfig
@@ -6,8 +6,6 @@
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_ENV_SIZE=0x2000
CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-rut"
@@ -90,7 +88,7 @@
CONFIG_BOOTCOUNT_ENV=y
CONFIG_DFU_NAND=y
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
# CONFIG_SPL_DM_MMC is not set
CONFIG_MMC_OMAP_HS=y
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index dc5fcdb..484f9e1 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -16,6 +16,7 @@
CONFIG_FIT_CIPHER=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTMETH_ANDROID=y
+CONFIG_UPL=y
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_MEASURED_BOOT=y
CONFIG_BOOTSTAGE=y
diff --git a/configs/sandbox_vpl_defconfig b/configs/sandbox_vpl_defconfig
index 72483d8..96e9211 100644
--- a/configs/sandbox_vpl_defconfig
+++ b/configs/sandbox_vpl_defconfig
@@ -27,6 +27,9 @@
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_UPL=y
+CONFIG_UPL_IN=y
+CONFIG_SPL_UPL_OUT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_BOOTSTAGE_FDT=y
@@ -35,6 +38,7 @@
CONFIG_CONSOLE_RECORD=y
CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_BLOBLIST_SIZE=0x5000
CONFIG_SPL_NO_BSS_LIMIT=y
CONFIG_HANDOFF=y
CONFIG_SPL_BOARD_INIT=y
diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig
index 0243b15..06e9b2a 100644
--- a/configs/sniper_defconfig
+++ b/configs/sniper_defconfig
@@ -1,43 +1,33 @@
CONFIG_ARM=y
-# CONFIG_SYS_THUMB_BUILD is not set
CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_TEXT_BASE=0x80100000
-CONFIG_SYS_MALLOC_LEN=0x120000
-CONFIG_SYS_MALLOC_F_LEN=0x400
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
-CONFIG_SPL_TEXT_BASE=0x40200000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_DEFAULT_DEVICE_TREE="ti/omap/omap3-sniper"
CONFIG_TARGET_SNIPER=y
-CONFIG_SPL_STACK=0x4020fffc
-CONFIG_SPL_BSS_START_ADDR=0x80000000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTCOMMAND="setenv boot_mmc_part ${kernel_mmc_part}; if test reboot-${reboot-mode} = reboot-r; then echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; if test reboot-${reboot-mode} = reboot-b; then echo fastboot; fastboot 0; fi; part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; mmc dev ${boot_mmc_dev}; mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && bootm ${kernel_addr_r};"
-CONFIG_SYS_CBSIZE=512
-CONFIG_SYS_PBSIZE=538
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SPL_MAX_SIZE=0xec00
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
-CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=2
# CONFIG_SPL_FS_EXT4 is not set
# CONFIG_SPL_NAND_SUPPORT is not set
-CONFIG_SYS_PROMPT="sniper # "
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_SPEED=400000
+CONFIG_SPL_DM=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_TWL4030_INPUT=y
CONFIG_MMC_OMAP_HS=y
-CONFIG_CONS_INDEX=3
-CONFIG_OF_LIBFDT=y
diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig
new file mode 100644
index 0000000..9915fff
--- /dev/null
+++ b/configs/tanix_tx1_defconfig
@@ -0,0 +1,25 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h313-tanix-tx1"
+CONFIG_SPL=y
+CONFIG_DRAM_SUN50I_H616_DX_ODT=0x06060606
+CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0d0d0d0d
+CONFIG_DRAM_SUN50I_H616_CA_DRI=0x1919
+CONFIG_DRAM_SUN50I_H616_ODT_EN=0x9988eeee
+CONFIG_DRAM_SUN50I_H616_TPR6=0x2fb08080
+CONFIG_DRAM_SUN50I_H616_TPR10=0x402f4469
+CONFIG_DRAM_SUN50I_H616_TPR11=0x0e0f0d0d
+CONFIG_DRAM_SUN50I_H616_TPR12=0x11131213
+CONFIG_MACH_SUN50I_H616=y
+CONFIG_SUNXI_DRAM_H616_LPDDR3=y
+CONFIG_R_I2C_ENABLE=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SYS_I2C_SLAVE=0x7f
+CONFIG_SYS_I2C_SPEED=400000
+CONFIG_AXP313_POWER=y
+CONFIG_AXP_DCDC3_VOLT=1200
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
diff --git a/configs/toybrick-rk3588_defconfig b/configs/toybrick-rk3588_defconfig
index 5a19035..12a076a 100644
--- a/configs/toybrick-rk3588_defconfig
+++ b/configs/toybrick-rk3588_defconfig
@@ -2,7 +2,7 @@
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
-CONFIG_DEFAULT_DEVICE_TREE="rk3588-toybrick-x0"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588-toybrick-x0"
CONFIG_ROCKCHIP_RK3588=y
CONFIG_SPL_SERIAL=y
CONFIG_TARGET_TOYBRICK_RK3588=y
@@ -31,7 +31,6 @@
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
-# CONFIG_OF_UPSTREAM is not set
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SPL_DM_SEQ_ALIAS=y
diff --git a/configs/tqma6dl_mba6_mmc_defconfig b/configs/tqma6dl_mba6_mmc_defconfig
index 1a1d253..d0c5db6 100644
--- a/configs/tqma6dl_mba6_mmc_defconfig
+++ b/configs/tqma6dl_mba6_mmc_defconfig
@@ -7,7 +7,7 @@
CONFIG_ENV_OFFSET=0x100000
CONFIG_MX6DL=y
CONFIG_TARGET_TQMA6=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mba6b"
+CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6dl-mba6b"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SUPPORT_RAW_INITRD=y
@@ -17,6 +17,7 @@
CONFIG_BOOTCOMMAND="run mmcboot; run netboot; run panicboot"
CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb"
CONFIG_SYS_PBSIZE=532
+# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_MAXARGS=32
CONFIG_CMD_BOOTZ=y
@@ -65,5 +66,8 @@
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
+CONFIG_IMX_WATCHDOG=y
diff --git a/configs/tqma6dl_mba6_spi_defconfig b/configs/tqma6dl_mba6_spi_defconfig
index c6a1c7c..953ceba 100644
--- a/configs/tqma6dl_mba6_spi_defconfig
+++ b/configs/tqma6dl_mba6_spi_defconfig
@@ -9,7 +9,7 @@
CONFIG_MX6DL=y
CONFIG_TARGET_TQMA6=y
CONFIG_TQMA6X_SPI_BOOT=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mba6b"
+CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6dl-mba6b"
CONFIG_ENV_OFFSET_REDUND=0x90000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
@@ -69,5 +69,8 @@
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
+CONFIG_IMX_WATCHDOG=y
diff --git a/configs/tqma6q_mba6_mmc_defconfig b/configs/tqma6q_mba6_mmc_defconfig
index 27f949c..d6706af 100644
--- a/configs/tqma6q_mba6_mmc_defconfig
+++ b/configs/tqma6q_mba6_mmc_defconfig
@@ -7,7 +7,7 @@
CONFIG_ENV_OFFSET=0x100000
CONFIG_MX6Q=y
CONFIG_TARGET_TQMA6=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6q-mba6b"
+CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6q-mba6b"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SUPPORT_RAW_INITRD=y
@@ -65,5 +65,8 @@
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
+CONFIG_IMX_WATCHDOG=y
diff --git a/configs/tqma6q_mba6_spi_defconfig b/configs/tqma6q_mba6_spi_defconfig
index 5d3ce79..28b1bfc 100644
--- a/configs/tqma6q_mba6_spi_defconfig
+++ b/configs/tqma6q_mba6_spi_defconfig
@@ -9,7 +9,7 @@
CONFIG_MX6Q=y
CONFIG_TARGET_TQMA6=y
CONFIG_TQMA6X_SPI_BOOT=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6q-mba6b"
+CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6q-mba6b"
CONFIG_ENV_OFFSET_REDUND=0x90000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
@@ -18,7 +18,7 @@
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="sf probe; run mmcboot; run netboot; run panicboot"
-CONFIG_DEFAULT_FDT_FILE="imx6q-mba6x.dtb"
+CONFIG_DEFAULT_FDT_FILE="nxp/imx/imx6q-mba6x.dtb"
CONFIG_SYS_PBSIZE=532
CONFIG_HUSH_PARSER=y
CONFIG_SYS_MAXARGS=32
@@ -69,5 +69,8 @@
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
+CONFIG_IMX_WATCHDOG=y
diff --git a/configs/tqma6s_mba6_mmc_defconfig b/configs/tqma6s_mba6_mmc_defconfig
index a9ed0d3..7bed776 100644
--- a/configs/tqma6s_mba6_mmc_defconfig
+++ b/configs/tqma6s_mba6_mmc_defconfig
@@ -7,7 +7,7 @@
CONFIG_ENV_OFFSET=0x100000
CONFIG_MX6S=y
CONFIG_TARGET_TQMA6=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mba6b"
+CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6dl-mba6b"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SUPPORT_RAW_INITRD=y
@@ -65,5 +65,8 @@
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
+CONFIG_IMX_WATCHDOG=y
diff --git a/configs/tqma6s_mba6_spi_defconfig b/configs/tqma6s_mba6_spi_defconfig
index 9cd8c3d..0af80d5 100644
--- a/configs/tqma6s_mba6_spi_defconfig
+++ b/configs/tqma6s_mba6_spi_defconfig
@@ -9,7 +9,7 @@
CONFIG_MX6S=y
CONFIG_TARGET_TQMA6=y
CONFIG_TQMA6X_SPI_BOOT=y
-CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mba6b"
+CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6dl-mba6b"
CONFIG_ENV_OFFSET_REDUND=0x90000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
@@ -69,5 +69,8 @@
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
+CONFIG_IMX_WATCHDOG=y
diff --git a/configs/vf610twr_defconfig b/configs/vf610twr_defconfig
index af889ec..7713454 100644
--- a/configs/vf610twr_defconfig
+++ b/configs/vf610twr_defconfig
@@ -47,7 +47,7 @@
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VYBRID_GPIO=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_FSL_ESDHC_IMX=y
CONFIG_MTD=y
diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig
index c50afc4..2cef898 100644
--- a/configs/vf610twr_nand_defconfig
+++ b/configs/vf610twr_nand_defconfig
@@ -48,7 +48,7 @@
CONFIG_ENV_RANGE=0x80000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VYBRID_GPIO=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MXC=y
CONFIG_FSL_ESDHC_IMX=y
CONFIG_MTD=y
diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig
index c39597c..e5c9c28 100644
--- a/configs/vining_2000_defconfig
+++ b/configs/vining_2000_defconfig
@@ -70,7 +70,7 @@
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FEC"
CONFIG_BOUNCE_BUFFER=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MXC=y
CONFIG_SUPPORT_EMMC_RPMB=y
diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig
index 4b73e15..e7da0de 100644
--- a/configs/work_92105_defconfig
+++ b/configs/work_92105_defconfig
@@ -47,7 +47,6 @@
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
CONFIG_DOS_PARTITION=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig
index 53ef81e..40a9b16 100644
--- a/configs/xilinx_versal_net_virt_defconfig
+++ b/configs/xilinx_versal_net_virt_defconfig
@@ -58,6 +58,7 @@
CONFIG_CMD_SQUASHFS=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
+CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_BOARD=y
CONFIG_DTB_RESELECT=y
diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index 915f0b9..dc1754f 100644
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -59,6 +59,7 @@
CONFIG_CMD_SQUASHFS=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
+CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_BOARD=y
CONFIG_ENV_IS_NOWHERE=y
diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index b2a1f14..f8b6a3f 100644
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -81,6 +81,7 @@
CONFIG_CMD_MTDPARTS_SPREAD=y
CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
CONFIG_CMD_UBI=y
+CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_OF_BOARD=y
CONFIG_OF_LIST="zynq-zc702 zynq-zc706 zynq-zc770-xm010 zynq-zc770-xm011 zynq-zc770-xm011-x16 zynq-zc770-xm012 zynq-zc770-xm013 zynq-cc108 zynq-microzed zynq-minized zynq-picozed zynq-zed zynq-zturn zynq-zturn-v5 zynq-zybo zynq-zybo-z7 zynq-dlc20-rev1.0"
CONFIG_ENV_IS_NOWHERE=y
diff --git a/configs/xilinx_zynqmp_kria_defconfig b/configs/xilinx_zynqmp_kria_defconfig
index 58e88b2..4c66c53 100644
--- a/configs/xilinx_zynqmp_kria_defconfig
+++ b/configs/xilinx_zynqmp_kria_defconfig
@@ -81,6 +81,7 @@
CONFIG_BOOTP_MAY_FAIL=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_NFS=y
CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EFIDEBUG=y
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index fa912ae..1133134 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -101,6 +101,7 @@
CONFIG_CMD_MTDPARTS_SPREAD=y
CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
CONFIG_CMD_UBI=y
+CONFIG_MMC_SPEED_MODE_SET=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_BOARD=y
diff --git a/disk/part.c b/disk/part.c
index bc93252..706d77b 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -285,6 +285,13 @@
blkcache_invalidate(desc->uclass_id, desc->devnum);
+ if (desc->part_type != PART_TYPE_UNKNOWN) {
+ for (entry = drv; entry != drv + n_ents; entry++) {
+ if (entry->part_type == desc->part_type && !entry->test(desc))
+ return;
+ }
+ }
+
desc->part_type = PART_TYPE_UNKNOWN;
for (entry = drv; entry != drv + n_ents; entry++) {
int ret;
@@ -304,7 +311,8 @@
CONFIG_IS_ENABLED(DOS_PARTITION) || \
CONFIG_IS_ENABLED(ISO_PARTITION) || \
CONFIG_IS_ENABLED(AMIGA_PARTITION) || \
- CONFIG_IS_ENABLED(EFI_PARTITION)
+ CONFIG_IS_ENABLED(EFI_PARTITION) || \
+ CONFIG_IS_ENABLED(MTD_PARTITIONS)
printf("\nPartition Map for %s device %d -- Partition Type: %s\n\n",
uclass_get_name(desc->uclass_id), desc->devnum, type);
#endif /* any CONFIG_..._PARTITION */
diff --git a/doc/I2C_Edge_Conditions b/doc/I2C_Edge_Conditions
index f4a9968..9ccb21c 100644
--- a/doc/I2C_Edge_Conditions
+++ b/doc/I2C_Edge_Conditions
@@ -31,12 +31,10 @@
!!!THIS IS AN UNDOCUMENTED I2C BUS BUG, NOT A AMCC 4xx BUG!!!
This reset edge condition could possibly be present in every I2C
-controller and device available. For boards where a I2C bus reset
-function can be implemented a i2c_init_board() function should be
-provided and enabled by #define'ing CONFIG_SYS_I2C_INIT_BOARD in your
-board's config file. Note that this is NOT necessary when using the
-bit-banging I2C driver (common/soft_i2c.c) as this already includes
-the I2C bus reset sequence.
+controller and device available.
+
+Note that this problem does not happen when using the bit-banging I2C driver
+(common/soft_i2c.c) as this already includes the I2C bus reset sequence.
Many thanks to Bill Hunter for finding this serious BUG.
diff --git a/doc/board/beagle/am62x_beagleplay.rst b/doc/board/beagle/am62x_beagleplay.rst
index 01f04be..bc71aab 100644
--- a/doc/board/beagle/am62x_beagleplay.rst
+++ b/doc/board/beagle/am62x_beagleplay.rst
@@ -23,7 +23,7 @@
----------
Below is the pictorial representation of boot flow:
-.. image:: ../ti/img/boot_diagram_k3_current.svg
+.. image:: ../ti/img/boot_diagram_am62.svg
:alt: Boot flow diagram
- On this platform, 'TI Foundational Security' (TIFS) functions as the
@@ -38,6 +38,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_tifsstub
+
Build procedure:
----------------
0. Setup the environment variables:
@@ -86,7 +90,7 @@
- tispl.bin
-.. image:: ../ti/img/dm_tispl.bin.svg
+.. image:: ../ti/img/tifsstub_dm_tispl.bin.svg
:alt: tispl.bin image format
Additional hardware for U-Boot development
diff --git a/doc/board/beagle/j721e_beagleboneai64.rst b/doc/board/beagle/j721e_beagleboneai64.rst
index d6b9c8c..090b2b3 100644
--- a/doc/board/beagle/j721e_beagleboneai64.rst
+++ b/doc/board/beagle/j721e_beagleboneai64.rst
@@ -42,6 +42,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure:
----------------
0. Setup the environment variables:
diff --git a/doc/board/nxp/imx8ulp_evk.rst b/doc/board/nxp/imx8ulp_evk.rst
new file mode 100644
index 0000000..a9f5546
--- /dev/null
+++ b/doc/board/nxp/imx8ulp_evk.rst
@@ -0,0 +1,79 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx8ulp_evk
+=======================
+
+U-Boot for the NXP i.MX 8ULP EVK board
+
+Quick Start
+-----------
+
+- Get and Build the ARM Trusted firmware
+- Get the uPower firmware
+- Get the M33 firmware
+- Get ahab-container.img
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: srctree is U-Boot source directory
+Get ATF from: https://github.com/nxp-imx/imx-atf/
+branch: lf_v2.10
+
+.. code-block:: bash
+
+ $ unset LDFLAGS
+ $ make PLAT=imx8ulp bl31
+ $ cp build/imx8ulp/release/bl31.bin $(srctree)
+
+Get the uPower firmware
+-----------------------
+
+.. code-block:: bash
+
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-upower-1.3.1.bin
+ $ chmod +x firmware-upower-1.3.1.bin
+ $ ./firmware-upower-1.3.1.bin
+ $ cp firmware-upower-1.3.1/upower_a1.bin $(srctree)/upower.bin
+
+Get the M33 firmware
+--------------------
+
+.. code-block:: bash
+
+ $ wget http://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx8ulp-m33-demo-2.14.1.bin
+ $ chmod +x imx8ulp-m33-demo-2.14.1.bin
+ $ ./imx8ulp-m33-demo-2.14.1.bin
+ $ cp imx8ulp-m33-demo-2.14.1/imx8ulp_m33_TCM_power_mode_switch.bin $(srctree)/m33_image.bin
+
+Get ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-ele-imx-0.1.2-4ed450a.bin
+ $ chmod +x firmware-ele-imx-0.1.2-4ed450a.bin
+ $ ./firmware-ele-imx-0.1.2-4ed450a.bin
+ $ cp firmware-ele-imx-0.1.2-4ed450a/mx8ulpa2-ahab-container.img $(srctree)
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-poky-linux-
+ $ make imx8ulp_evk_defconfig
+ $ make
+
+Burn the flash.bin to MicroSD card offset 32KB:
+
+.. code-block:: bash
+
+ $ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
+
+Boot
+----
+
+Set Boot switch to SD boot
diff --git a/doc/board/nxp/index.rst b/doc/board/nxp/index.rst
index 9468773..5f1e878 100644
--- a/doc/board/nxp/index.rst
+++ b/doc/board/nxp/index.rst
@@ -11,6 +11,7 @@
imx8mp_evk
imx8mq_evk
imx8qxp_mek
+ imx8ulp_evk
imx93_11x11_evk
imxrt1020-evk
imxrt1050-evk
diff --git a/doc/board/phytec/phycore-am62x.rst b/doc/board/phytec/phycore-am62x.rst
index a7ce2c5..56c1fd8 100644
--- a/doc/board/phytec/phycore-am62x.rst
+++ b/doc/board/phytec/phycore-am62x.rst
@@ -30,6 +30,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_tifsstub
+
Build procedure
---------------
diff --git a/doc/board/phytec/phycore-am64x.rst b/doc/board/phytec/phycore-am64x.rst
index 68d78ad..01c42b9 100644
--- a/doc/board/phytec/phycore-am64x.rst
+++ b/doc/board/phytec/phycore-am64x.rst
@@ -30,6 +30,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares_sysfw
+ :end-before: .. k3_rst_include_end_boot_firmwares_sysfw
+
Build procedure
---------------
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index bedc52e..0f9cb40 100644
--- a/doc/board/rockchip/rockchip.rst
+++ b/doc/board/rockchip/rockchip.rst
@@ -54,6 +54,7 @@
- Amarula Vyasa-RK3288 (vyasa-rk3288)
* rk3308
- Radxa ROCK Pi S (rock-pi-s-rk3308)
+ - Radxa ROCK S0 (rock-s0-rk3308)
- Rockchip Evb-RK3308 (evb-rk3308)
- Roc-cc-RK3308 (roc-cc-rk3308)
* rk3326
@@ -105,6 +106,9 @@
- Pine64 SOQuartz on Model A (soquartz-model-a-rk3566)
- Powkiddy X55 (powkiddy-x55-rk3566)
- Radxa CM3 IO Board (radxa-cm3-io-rk3566)
+ - Radxa ROCK 3C (rock-3c-rk3566)
+ - Radxa ZERO 3W/3E (radxa-zero-3-rk3566)
+ - Xunlong Orange Pi 3B (orangepi-3b-rk3566)
* rk3568
- Rockchip Evb-RK3568 (evb-rk3568)
@@ -115,19 +119,22 @@
- Generic RK3566/RK3568 (generic-rk3568)
- Hardkernel ODROID-M1 (odroid-m1-rk3568)
- Radxa E25 Carrier Board (radxa-e25-rk3568)
- - Radxa ROCK 3 Model A (rock-3a-rk3568)
+ - Radxa ROCK 3A (rock-3a-rk3568)
+ - Radxa ROCK 3B (rock-3b-rk3568)
* rk3588
- ArmSoM Sige7 (sige7-rk3588)
- Rockchip EVB (evb-rk3588)
- Edgeble Neural Compute Module 6A SoM - Neu6a (neu6a-io-rk3588)
- Edgeble Neural Compute Module 6B SoM - Neu6b (neu6b-io-rk3588)
+ - FriendlyElec CM3588 NAS (cm3588-nas-rk3588)
- FriendlyElec NanoPC-T6 (nanopc-t6-rk3588)
- FriendlyElec NanoPi R6C (nanopi-r6c-rk3588s)
- FriendlyElec NanoPi R6S (nanopi-r6s-rk3588s)
- Generic RK3588S/RK3588 (generic-rk3588)
- Indiedroid Nova (nova-rk3588s)
- Pine64 QuartzPro64 (quartzpro64-rk3588)
+ - Radxa ROCK 5 ITX (rock-5-itx-rk3588)
- Radxa ROCK 5A (rock5a-rk3588s)
- Radxa ROCK 5B (rock5b-rk3588)
- Rockchip Toybrick TB-RK3588X (toybrick-rk3588)
diff --git a/doc/board/ti/am62ax_sk.rst b/doc/board/ti/am62ax_sk.rst
index 60726b6..262340e 100644
--- a/doc/board/ti/am62ax_sk.rst
+++ b/doc/board/ti/am62ax_sk.rst
@@ -47,7 +47,7 @@
----------
Below is the pictorial representation of boot flow:
-.. image:: img/boot_diagram_k3_current.svg
+.. image:: img/boot_diagram_am62.svg
:alt: Boot flow diagram
- Here TIFS acts as master and provides all the critical services. R5/A53
@@ -60,6 +60,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_tifsstub
+
Build procedure:
----------------
0. Setup the environment variables:
@@ -144,7 +148,7 @@
- tispl.bin
-.. image:: img/dm_tispl.bin.svg
+.. image:: img/tifsstub_dm_tispl.bin.svg
:alt: tispl.bin image format
Switch Setting for Boot Mode
diff --git a/doc/board/ti/am62px_sk.rst b/doc/board/ti/am62px_sk.rst
index c80b506..99bdc03 100644
--- a/doc/board/ti/am62px_sk.rst
+++ b/doc/board/ti/am62px_sk.rst
@@ -55,7 +55,7 @@
The bootflow is exactly the same as all SoCs in the am62xxx extended SoC
family. Below is the pictorial representation:
-.. image:: img/boot_diagram_k3_current.svg
+.. image:: img/boot_diagram_am62.svg
:alt: Boot flow diagram
- Here TIFS acts as master and provides all the critical services. R5/A53
@@ -68,6 +68,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_tifsstub
+
Build procedure:
----------------
@@ -153,7 +157,7 @@
- tispl.bin
-.. image:: img/dm_tispl.bin.svg
+.. image:: img/tifsstub_dm_tispl.bin.svg
:alt: tispl.bin image format
OSPI:
diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst
index 2a25e84..b9d3524 100644
--- a/doc/board/ti/am62x_sk.rst
+++ b/doc/board/ti/am62x_sk.rst
@@ -46,7 +46,7 @@
----------
Below is the pictorial representation of boot flow:
-.. image:: img/boot_diagram_k3_current.svg
+.. image:: img/boot_diagram_am62.svg
:alt: Boot flow diagram
- Here TIFS acts as master and provides all the critical services. R5/A53
@@ -59,6 +59,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_tifsstub
+
Build procedure:
----------------
0. Setup the environment variables:
@@ -161,7 +165,7 @@
- tispl.bin
-.. image:: img/dm_tispl.bin.svg
+.. image:: img/tifsstub_dm_tispl.bin.svg
:alt: tispl.bin image format
OSPI:
diff --git a/doc/board/ti/am64x_evm.rst b/doc/board/ti/am64x_evm.rst
index 88997b6..65c4c45 100644
--- a/doc/board/ti/am64x_evm.rst
+++ b/doc/board/ti/am64x_evm.rst
@@ -48,6 +48,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares_sysfw
+ :end-before: .. k3_rst_include_end_boot_firmwares_sysfw
+
Build procedure:
----------------
0. Setup the environment variables:
diff --git a/doc/board/ti/am65x_evm.rst b/doc/board/ti/am65x_evm.rst
index 89011c0..60b08ce 100644
--- a/doc/board/ti/am65x_evm.rst
+++ b/doc/board/ti/am65x_evm.rst
@@ -58,6 +58,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares_sysfw
+ :end-before: .. k3_rst_include_end_boot_firmwares_sysfw
+
Build procedure:
----------------
0. Setup the environment variables:
diff --git a/doc/board/ti/img/boot_diagram_am62.svg b/doc/board/ti/img/boot_diagram_am62.svg
new file mode 100644
index 0000000..44c54db
--- /dev/null
+++ b/doc/board/ti/img/boot_diagram_am62.svg
@@ -0,0 +1,1983 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause -->
+
+<!-- Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ -->
+
+<svg
+ version="1.1"
+ width="706px"
+ height="951px"
+ viewBox="-0.5 -0.5 706 951"
+ id="svg420"
+ sodipodi:docname="boot_diagram_am62.svg"
+ inkscape:version="1.1.2 (0a00cf5339, 2022-02-04)"
+ xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+ xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+ xmlns:xlink="http://www.w3.org/1999/xlink"
+ xmlns="http://www.w3.org/2000/svg"
+ xmlns:svg="http://www.w3.org/2000/svg"
+ xmlns:xhtml="http://www.w3.org/1999/xhtml">
+ <sodipodi:namedview
+ id="namedview422"
+ pagecolor="#ffffff"
+ bordercolor="#666666"
+ borderopacity="1.0"
+ inkscape:pageshadow="2"
+ inkscape:pageopacity="0.0"
+ inkscape:pagecheckerboard="0"
+ showgrid="false"
+ inkscape:zoom="0.86961094"
+ inkscape:cx="259.31137"
+ inkscape:cy="305.88392"
+ inkscape:window-width="1920"
+ inkscape:window-height="1008"
+ inkscape:window-x="0"
+ inkscape:window-y="0"
+ inkscape:window-maximized="1"
+ inkscape:current-layer="g138" />
+ <defs
+ id="defs2" />
+ <g
+ id="g410">
+ <rect
+ x="482"
+ y="581"
+ width="10"
+ height="70"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect4" />
+ <rect
+ x="235.5"
+ y="50"
+ width="144.75"
+ height="40"
+ rx="6"
+ ry="6"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect6" />
+ <path
+ d="M 307.88 90 L 307.88 940"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ stroke-dasharray="3 3"
+ pointer-events="all"
+ id="path8" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g14">
+ <switch
+ id="switch12">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 143px; height: 1px; padding-top: 70px; margin-left: 237px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Verdana; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Cortex-R</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="308"
+ y="74"
+ fill="rgb(0, 0, 0)"
+ font-family="Verdana"
+ font-size="12px"
+ text-anchor="middle"
+ id="text10">Cortex-R</text>
+ </switch>
+ </g>
+ <rect
+ x="298.75"
+ y="160"
+ width="10"
+ height="130"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect16" />
+ <rect
+ x="301"
+ y="161"
+ width="71.5"
+ height="30"
+ fill="#ffe6cc"
+ stroke="#d79b00"
+ pointer-events="all"
+ id="rect18" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g24">
+ <switch
+ id="switch22">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 70px; height: 1px; padding-top: 176px; margin-left: 302px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">ROM</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="337"
+ y="180"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text20">ROM</text>
+ </switch>
+ </g>
+ <rect
+ x="299.75"
+ y="305"
+ width="10"
+ height="205"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect26" />
+ <rect
+ x="302"
+ y="306"
+ width="105.5"
+ height="30"
+ fill="#d5e8d4"
+ stroke="#82b366"
+ pointer-events="all"
+ id="rect28" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g34">
+ <switch
+ id="switch32">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 104px; height: 1px; padding-top: 321px; margin-left: 303px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Cortex-R SPL</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="355"
+ y="325"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text30">Cortex-R SPL</text>
+ </switch>
+ </g>
+ <rect
+ x="308.75"
+ y="190"
+ width="90"
+ height="40"
+ rx="6"
+ ry="6"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect36" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g42">
+ <switch
+ id="switch40">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 88px; height: 1px; padding-top: 210px; margin-left: 310px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Load and auth tiboot3.bin</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="354"
+ y="214"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text38">Load and auth t...</text>
+ </switch>
+ </g>
+ <rect
+ x="309"
+ y="262"
+ width="90"
+ height="32"
+ rx="4.8"
+ ry="4.8"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect44" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g50">
+ <switch
+ id="switch48">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 88px; height: 1px; padding-top: 278px; margin-left: 310px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Load system<xhtml:br />
+config data</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="354"
+ y="282"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text46">Load system...</text>
+ </switch>
+ </g>
+ <rect
+ x="310"
+ y="336"
+ width="90"
+ height="32"
+ rx="4.8"
+ ry="4.8"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect52" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g58">
+ <switch
+ id="switch56">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 88px; height: 1px; padding-top: 352px; margin-left: 311px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">DDR Config</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="355"
+ y="356"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text54">DDR Config</text>
+ </switch>
+ </g>
+ <rect
+ x="310"
+ y="368"
+ width="90"
+ height="32"
+ rx="4.8"
+ ry="4.8"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect60" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g66">
+ <switch
+ id="switch64">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 88px; height: 1px; padding-top: 384px; margin-left: 311px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Load tispl.bin</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="355"
+ y="388"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text62">Load tispl.bin</text>
+ </switch>
+ </g>
+ <rect
+ x="310"
+ y="440"
+ width="90"
+ height="32"
+ rx="4.8"
+ ry="4.8"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect68" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g74">
+ <switch
+ id="switch72">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 88px; height: 1px; padding-top: 456px; margin-left: 311px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Start Cortex-A</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="355"
+ y="460"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text70">Start Cortex-A</text>
+ </switch>
+ </g>
+ <rect
+ x="310"
+ y="472"
+ width="90"
+ height="32"
+ rx="4.8"
+ ry="4.8"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect76" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g82">
+ <switch
+ id="switch80">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 88px; height: 1px; padding-top: 488px; margin-left: 311px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Start DM</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="355"
+ y="492"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text78">Start DM</text>
+ </switch>
+ </g>
+ <rect
+ x="300"
+ y="530"
+ width="10"
+ height="410"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect84" />
+ <path
+ d="M 347.5 565 L 347.5 570 L 347.5 573.63"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path86" />
+ <path
+ d="M 347.5 578.88 L 344 571.88 L 347.5 573.63 L 351 571.88 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path88" />
+ <rect
+ x="302"
+ y="535"
+ width="71.5"
+ height="30"
+ fill="#e1d5e7"
+ stroke="#9673a6"
+ pointer-events="all"
+ id="rect90" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g96">
+ <switch
+ id="switch94">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 70px; height: 1px; padding-top: 550px; margin-left: 303px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Device Mgr</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="338"
+ y="554"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text92">Device Mgr</text>
+ </switch>
+ </g>
+ <path
+ d="M 299 456 L 139.37 456"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path98" />
+ <path
+ d="M 134.12 456 L 141.12 452.5 L 139.37 456 L 141.12 459.5 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path100" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g106">
+ <switch
+ id="switch104">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 440px; margin-left: 257px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); background-color: rgb(255, 255, 255); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; background-color: rgb(255, 255, 255); white-space: nowrap;">Start Cortex-A</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="257"
+ y="443"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="11px"
+ text-anchor="middle"
+ id="text102">Start Cort...</text>
+ </switch>
+ </g>
+ <path
+ d="M 481 711 L 139.37 711"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path108" />
+ <path
+ d="M 134.12 711 L 141.12 707.5 L 139.37 711 L 141.12 714.5 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path110" />
+ <path
+ d="M 482 692 L 317.37 691.04"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path112" />
+ <path
+ d="M 312.12 691.01 L 319.14 687.55 L 317.37 691.04 L 319.1 694.55 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path114" />
+ <path
+ d="M 482 799 L 317.37 798.04"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path116" />
+ <path
+ d="M 312.12 798.01 L 319.14 794.55 L 317.37 798.04 L 319.1 801.55 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path118" />
+ <path
+ d="M 481 791 L 139.37 791"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path120" />
+ <path
+ d="M 134.12 791 L 141.12 787.5 L 139.37 791 L 141.12 794.5 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path122" />
+ <path
+ d="M 481 890 L 315.37 890.96"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path124" />
+ <path
+ d="M 310.12 890.99 L 317.1 887.45 L 315.37 890.96 L 317.14 894.45 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path126" />
+ <path
+ d="M 481 879 L 139.37 881.95"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path128" />
+ <path
+ d="M 134.12 881.99 L 141.09 878.43 L 139.37 881.95 L 141.15 885.43 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path130" />
+ <rect
+ x="302"
+ y="580"
+ width="71.5"
+ height="30"
+ fill="#e1d5e7"
+ stroke="#9673a6"
+ pointer-events="all"
+ id="rect132" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g138">
+ <switch
+ id="switch136">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 70px; height: 1px; padding-top: 595px; margin-left: 303px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Load TIFS Stub in TCM</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="338"
+ y="599"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text134">Load TIFS St...</text>
+ </switch>
+ </g>
+ <path
+ d="M 482 640 L 315.37 640"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path140" />
+ <path
+ d="M 310.12 640 L 317.12 636.5 L 315.37 640 L 317.12 643.5 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path142" />
+ <rect
+ x="437"
+ y="50"
+ width="116.5"
+ height="40"
+ rx="6"
+ ry="6"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect144" />
+ <path
+ d="M 495.25 90 L 495.25 820"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ stroke-dasharray="3 3"
+ pointer-events="all"
+ id="path146" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g152">
+ <switch
+ id="switch150">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 115px; height: 1px; padding-top: 70px; margin-left: 438px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Verdana; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Cortex-A</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="495"
+ y="74"
+ fill="rgb(0, 0, 0)"
+ font-family="Verdana"
+ font-size="12px"
+ text-anchor="middle"
+ id="text148">Cortex-A</text>
+ </switch>
+ </g>
+ <rect
+ x="482"
+ y="510"
+ width="10"
+ height="70"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect154" />
+ <path
+ d="M 482 565 L 139.37 565"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path156" />
+ <path
+ d="M 134.12 565 L 141.12 561.5 L 139.37 565 L 141.12 568.5 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path158" />
+ <path
+ d="M 482 614.97 L 140.37 614.67"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path160" />
+ <path
+ d="M 135.12 614.66 L 142.12 611.17 L 140.37 614.67 L 142.11 618.17 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path162" />
+ <rect
+ x="482"
+ y="600"
+ width="71.5"
+ height="30"
+ fill="#d5e8d4"
+ stroke="#82b366"
+ pointer-events="all"
+ id="rect164" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g170">
+ <switch
+ id="switch168">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 70px; height: 1px; padding-top: 615px; margin-left: 483px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">OP-TEE</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="518"
+ y="619"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text166">OP-TEE</text>
+ </switch>
+ </g>
+ <rect
+ x="577"
+ y="50"
+ width="116.5"
+ height="40"
+ rx="6"
+ ry="6"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect172" />
+ <path
+ d="M 635.25 90 L 635.25 950"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ stroke-dasharray="3 3"
+ pointer-events="all"
+ id="path174" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g180">
+ <switch
+ id="switch178">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 115px; height: 1px; padding-top: 70px; margin-left: 578px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Verdana; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Cortex-R/M<xhtml:br />
+C6x/C7x</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="635"
+ y="74"
+ fill="rgb(0, 0, 0)"
+ font-family="Verdana"
+ font-size="12px"
+ text-anchor="middle"
+ id="text176">Cortex-R/M...</text>
+ </switch>
+ </g>
+ <rect
+ x="631"
+ y="910"
+ width="10"
+ height="38"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect182" />
+ <rect
+ x="633"
+ y="912"
+ width="71.5"
+ height="30"
+ fill="#e1d5e7"
+ stroke="#9673a6"
+ pointer-events="all"
+ id="rect184" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g190">
+ <switch
+ id="switch188">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 70px; height: 1px; padding-top: 927px; margin-left: 634px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Aux f/w</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="669"
+ y="931"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text186">Aux f/w</text>
+ </switch>
+ </g>
+ <rect
+ x="77"
+ y="50"
+ width="100"
+ height="40"
+ rx="6"
+ ry="6"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect192" />
+ <path
+ d="M 127 90 L 127 940"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ stroke-dasharray="3 3"
+ pointer-events="all"
+ id="path194" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g200">
+ <switch
+ id="switch198">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 70px; margin-left: 78px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Verdana; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">TIFS/DMSC</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="127"
+ y="74"
+ fill="rgb(0, 0, 0)"
+ font-family="Verdana"
+ font-size="12px"
+ text-anchor="middle"
+ id="text196">TIFS/DMSC</text>
+ </switch>
+ </g>
+ <rect
+ x="122"
+ y="130"
+ width="10"
+ height="110"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect202" />
+ <rect
+ x="79"
+ y="132"
+ width="50"
+ height="30"
+ fill="#ffe6cc"
+ stroke="#d79b00"
+ pointer-events="all"
+ id="rect204" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g210">
+ <switch
+ id="switch208">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 48px; height: 1px; padding-top: 147px; margin-left: 80px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">ROM</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="104"
+ y="151"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text206">ROM</text>
+ </switch>
+ </g>
+ <rect
+ x="122"
+ y="253"
+ width="10"
+ height="687"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect212" />
+ <path
+ d="M 297 238 L 138.37 238"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path214" />
+ <path
+ d="M 133.12 238 L 140.12 234.5 L 138.37 238 L 140.12 241.5 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path216" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g222">
+ <switch
+ id="switch220">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 230px; margin-left: 267px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); background-color: rgb(255, 255, 255); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; background-color: rgb(255, 255, 255); white-space: nowrap;">Start TIFS</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="267"
+ y="233"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="11px"
+ text-anchor="middle"
+ id="text218">Start TIFS</text>
+ </switch>
+ </g>
+ <rect
+ x="80"
+ y="255"
+ width="50"
+ height="30"
+ fill="#f8cecc"
+ stroke="#b85450"
+ pointer-events="all"
+ id="rect224" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g230">
+ <switch
+ id="switch228">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 48px; height: 1px; padding-top: 270px; margin-left: 81px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">TIFS</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="105"
+ y="274"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text226">TIFS</text>
+ </switch>
+ </g>
+ <path
+ d="M 62 0 L 178 0 L 192 14 L 192 35 L 62 35 L 62 0 Z"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path232" />
+ <path
+ d="M 178 0 L 178 14 L 192 14"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path234" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g240">
+ <switch
+ id="switch238">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe flex-start; justify-content: unsafe center; width: 128px; height: 1px; padding-top: 1px; margin-left: 63px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Verdana; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Security Enclave Boot Processor</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="127"
+ y="13"
+ fill="rgb(0, 0, 0)"
+ font-family="Verdana"
+ font-size="12px"
+ text-anchor="middle"
+ id="text236">Security Enclave Boot...</text>
+ </switch>
+ </g>
+ <path
+ d="M 241 0 L 361 0 L 375 14 L 375 35 L 241 35 L 241 0 Z"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path242" />
+ <path
+ d="M 361 0 L 361 14 L 375 14"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path244" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g250">
+ <switch
+ id="switch248">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe flex-start; justify-content: unsafe center; width: 132px; height: 1px; padding-top: 1px; margin-left: 242px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Verdana; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Boot Loader <xhtml:br />
+Processor</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="308"
+ y="13"
+ fill="rgb(0, 0, 0)"
+ font-family="Verdana"
+ font-size="12px"
+ text-anchor="middle"
+ id="text246">Boot Loader...</text>
+ </switch>
+ </g>
+ <path
+ d="M 437 0 L 523 0 L 537 14 L 537 35 L 437 35 L 437 0 Z"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path252" />
+ <path
+ d="M 523 0 L 523 14 L 537 14"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path254" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g260">
+ <switch
+ id="switch258">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe flex-start; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 1px; margin-left: 438px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Verdana; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Main CPU</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="487"
+ y="13"
+ fill="rgb(0, 0, 0)"
+ font-family="Verdana"
+ font-size="12px"
+ text-anchor="middle"
+ id="text256">Main CPU</text>
+ </switch>
+ </g>
+ <path
+ d="M 577 0 L 663 0 L 677 14 L 677 35 L 577 35 L 577 0 Z"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path262" />
+ <path
+ d="M 663 0 L 663 14 L 677 14"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path264" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g270">
+ <switch
+ id="switch268">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe flex-start; justify-content: unsafe center; width: 98px; height: 1px; padding-top: 1px; margin-left: 578px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Verdana; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Auxiliary<xhtml:br />
+Processor</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="627"
+ y="13"
+ fill="rgb(0, 0, 0)"
+ font-family="Verdana"
+ font-size="12px"
+ text-anchor="middle"
+ id="text266">Auxiliary...</text>
+ </switch>
+ </g>
+ <path
+ d="M 7 120 L 120.63 120"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ stroke-dasharray="12 12"
+ pointer-events="stroke"
+ id="path272" />
+ <path
+ d="M 125.88 120 L 118.88 123.5 L 120.63 120 L 118.88 116.5 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path274" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g280">
+ <switch
+ id="switch278">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe flex-end; justify-content: unsafe flex-start; width: 1px; height: 1px; padding-top: 118px; margin-left: 9px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: left;"
+ data-drawio-colors="color: rgb(0, 0, 0); background-color: rgb(255, 255, 255); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; background-color: rgb(255, 255, 255); white-space: nowrap;">H/w Seq: Reset rls</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="9"
+ y="118"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="11px"
+ id="text276">H/w Seq: Reset rls</text>
+ </switch>
+ </g>
+ <path
+ d="M 298 200 L 138.37 199.98"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path282" />
+ <path
+ d="M 133.12 199.98 L 140.12 196.48 L 138.37 199.98 L 140.12 203.48 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path284" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g290">
+ <switch
+ id="switch288">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 190px; margin-left: 257px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); background-color: rgb(255, 255, 255); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; background-color: rgb(255, 255, 255); white-space: nowrap;">Auth tiboot3.bin</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="257"
+ y="193"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="11px"
+ text-anchor="middle"
+ id="text286">Auth tiboo...</text>
+ </switch>
+ </g>
+ <path
+ d="M 133 159 L 301.01 159"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path292" />
+ <path
+ d="M 306.26 159 L 299.26 162.5 L 301.01 159 L 299.26 155.5 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path294" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g300">
+ <switch
+ id="switch298">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 150px; margin-left: 178px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); background-color: rgb(255, 255, 255); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; background-color: rgb(255, 255, 255); white-space: nowrap;">Release Reset</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="178"
+ y="153"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="11px"
+ text-anchor="middle"
+ id="text296">Release Re...</text>
+ </switch>
+ </g>
+ <path
+ d="M 299 281.94 L 139.37 281.04"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path302" />
+ <path
+ d="M 134.12 281.01 L 141.14 277.55 L 139.37 281.04 L 141.1 284.55 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path304" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g310">
+ <switch
+ id="switch308">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 270px; margin-left: 237px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); background-color: rgb(255, 255, 255); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; background-color: rgb(255, 255, 255); white-space: nowrap;">Load system config data</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="237"
+ y="273"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="11px"
+ text-anchor="middle"
+ id="text306">Load syste...</text>
+ </switch>
+ </g>
+ <rect
+ x="308.75"
+ y="230"
+ width="90"
+ height="32"
+ rx="4.8"
+ ry="4.8"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect312" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g318">
+ <switch
+ id="switch316">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 88px; height: 1px; padding-top: 246px; margin-left: 310px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Start TIFS</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="354"
+ y="250"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text314">Start TIFS</text>
+ </switch>
+ </g>
+ <rect
+ x="310"
+ y="400"
+ width="90"
+ height="32"
+ rx="4.8"
+ ry="4.8"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect320" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g326">
+ <switch
+ id="switch324">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 88px; height: 1px; padding-top: 416px; margin-left: 311px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Load DM f/w</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="355"
+ y="420"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text322">Load DM f/w</text>
+ </switch>
+ </g>
+ <path
+ d="M 303 510 L 333 510 L 333 530 L 309.12 530"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path328" />
+ <path
+ d="M 302.12 530 L 309.12 526.5 L 309.12 533.5 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path330" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g336">
+ <switch
+ id="switch334">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe flex-start; width: 1px; height: 1px; padding-top: 521px; margin-left: 337px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: left;"
+ data-drawio-colors="color: rgb(0, 0, 0); background-color: rgb(255, 255, 255); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; background-color: rgb(255, 255, 255); white-space: nowrap;">branch</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="337"
+ y="524"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="11px"
+ id="text332">branch</text>
+ </switch>
+ </g>
+ <path
+ d="M 133 511 L 137 511 L 476.63 511"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path338" />
+ <path
+ d="M 481.88 511 L 474.88 514.5 L 476.63 511 L 474.88 507.5 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path340" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g346">
+ <switch
+ id="switch344">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 500px; margin-left: 177px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); background-color: rgb(255, 255, 255); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; background-color: rgb(255, 255, 255); white-space: nowrap;">Release Reset</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="177"
+ y="503"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="11px"
+ text-anchor="middle"
+ id="text342">Release Re...</text>
+ </switch>
+ </g>
+ <rect
+ x="484"
+ y="513"
+ width="71.5"
+ height="30"
+ fill="#d5e8d4"
+ stroke="#82b366"
+ pointer-events="all"
+ id="rect348" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g354">
+ <switch
+ id="switch352">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 70px; height: 1px; padding-top: 528px; margin-left: 485px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">TF-A </xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="520"
+ y="532"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text350">TF-A </text>
+ </switch>
+ </g>
+ <rect
+ x="482"
+ y="662"
+ width="10"
+ height="78"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect356" />
+ <rect
+ x="484"
+ y="665"
+ width="83"
+ height="30"
+ fill="#d5e8d4"
+ stroke="#82b366"
+ pointer-events="all"
+ id="rect358" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g364">
+ <switch
+ id="switch362">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 81px; height: 1px; padding-top: 680px; margin-left: 485px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Cortex-A SPL</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="526"
+ y="684"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text360">Cortex-A SPL</text>
+ </switch>
+ </g>
+ <rect
+ x="482"
+ y="748"
+ width="10"
+ height="192"
+ fill="rgb(255, 255, 255)"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect366" />
+ <rect
+ x="484"
+ y="751"
+ width="83"
+ height="30"
+ fill="#d5e8d4"
+ stroke="#82b366"
+ pointer-events="all"
+ id="rect368" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g374">
+ <switch
+ id="switch372">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 81px; height: 1px; padding-top: 766px; margin-left: 485px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">U-Boot</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="526"
+ y="770"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text370">U-Boot</text>
+ </switch>
+ </g>
+ <rect
+ x="492"
+ y="700"
+ width="103"
+ height="32"
+ rx="4.8"
+ ry="4.8"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect376" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g382">
+ <switch
+ id="switch380">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 101px; height: 1px; padding-top: 716px; margin-left: 493px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Load u-boot.img</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="544"
+ y="720"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text378">Load u-boot.img</text>
+ </switch>
+ </g>
+ <rect
+ x="492"
+ y="820"
+ width="103"
+ height="32"
+ rx="4.8"
+ ry="4.8"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect384" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g390">
+ <switch
+ id="switch388">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 101px; height: 1px; padding-top: 836px; margin-left: 493px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Load Aux core f/w<xhtml:br />
+(optional)</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="544"
+ y="840"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text386">Load Aux core f/w...</text>
+ </switch>
+ </g>
+ <rect
+ x="492"
+ y="860"
+ width="103"
+ height="32"
+ rx="4.8"
+ ry="4.8"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect392" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g398">
+ <switch
+ id="switch396">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 101px; height: 1px; padding-top: 876px; margin-left: 493px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Start Aux core<xhtml:br />
+(optional)</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="544"
+ y="880"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text394">Start Aux core...</text>
+ </switch>
+ </g>
+ <path
+ d="M 311 909 L 628.38 909"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="stroke"
+ id="path400" />
+ <path
+ d="M 633.63 909 L 626.63 912.5 L 628.38 909 L 626.63 905.5 Z"
+ fill="rgb(0, 0, 0)"
+ stroke="rgb(0, 0, 0)"
+ stroke-miterlimit="10"
+ pointer-events="all"
+ id="path402" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g408">
+ <switch
+ id="switch406">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 1px; height: 1px; padding-top: 900px; margin-left: 357px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); background-color: rgb(255, 255, 255); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 11px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; background-color: rgb(255, 255, 255); white-space: nowrap;">Release Reset</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="357"
+ y="903"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="11px"
+ text-anchor="middle"
+ id="text404">Release Re...</text>
+ </switch>
+ </g>
+ </g>
+ <switch
+ id="switch418">
+ <g
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility"
+ id="g412" />
+ <a
+ transform="translate(0,-5)"
+ xlink:href="https://www.drawio.com/doc/faq/svg-export-text-problems"
+ target="_blank"
+ id="a416">
+ <text
+ text-anchor="middle"
+ font-size="10px"
+ x="50%"
+ y="100%"
+ id="text414">Text is not SVG - cannot display</text>
+ </a>
+ </switch>
+</svg>
diff --git a/doc/board/ti/img/tifsstub_dm_tispl.bin.svg b/doc/board/ti/img/tifsstub_dm_tispl.bin.svg
new file mode 100644
index 0000000..5d56d81
--- /dev/null
+++ b/doc/board/ti/img/tifsstub_dm_tispl.bin.svg
@@ -0,0 +1,353 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause -->
+
+<!-- Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ -->
+
+<svg
+ version="1.1"
+ width="231px"
+ height="351px"
+ viewBox="-0.5 -0.5 231 351"
+ id="svg72"
+ sodipodi:docname="tifsstub_dm_tispl.bin.svg"
+ inkscape:version="1.1.2 (0a00cf5339, 2022-02-04)"
+ xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+ xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+ xmlns:xlink="http://www.w3.org/1999/xlink"
+ xmlns="http://www.w3.org/2000/svg"
+ xmlns:svg="http://www.w3.org/2000/svg"
+ xmlns:xhtml="http://www.w3.org/1999/xhtml">
+ <sodipodi:namedview
+ id="namedview74"
+ pagecolor="#ffffff"
+ bordercolor="#666666"
+ borderopacity="1.0"
+ inkscape:pageshadow="2"
+ inkscape:pageopacity="0.0"
+ inkscape:pagecheckerboard="0"
+ showgrid="false"
+ inkscape:zoom="2.3561254"
+ inkscape:cx="115.65599"
+ inkscape:cy="276.72551"
+ inkscape:window-width="1920"
+ inkscape:window-height="1008"
+ inkscape:window-x="0"
+ inkscape:window-y="0"
+ inkscape:window-maximized="1"
+ inkscape:current-layer="svg72" />
+ <defs
+ id="defs2" />
+ <g
+ id="g62">
+ <rect
+ x="0"
+ y="0"
+ width="230"
+ height="350"
+ rx="34.5"
+ ry="34.5"
+ fill="#d5e8d4"
+ stroke="#82b366"
+ pointer-events="all"
+ id="rect4" />
+ <rect
+ x="40"
+ y="30"
+ width="160"
+ height="60"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect6" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g12">
+ <switch
+ id="switch10">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 158px; height: 1px; padding-top: 60px; margin-left: 41px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">FIT Header</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="120"
+ y="64"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text8">FIT Header</text>
+ </switch>
+ </g>
+ <rect
+ x="40"
+ y="160"
+ width="160"
+ height="50"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect14" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g20">
+ <switch
+ id="switch18">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 158px; height: 1px; padding-top: 185px; margin-left: 41px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">TIFS Stub<xhtml:br />
+(GP, HS-FS, HS-SE)</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="120"
+ y="189"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text16">TIFS Stub...</text>
+ </switch>
+ </g>
+ <rect
+ x="40"
+ y="90"
+ width="160"
+ height="30"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect22" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g28">
+ <switch
+ id="switch26">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 158px; height: 1px; padding-top: 105px; margin-left: 41px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">TF-A</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="120"
+ y="109"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text24">TF-A</text>
+ </switch>
+ </g>
+ <rect
+ x="40"
+ y="120"
+ width="160"
+ height="40"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect30" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g36">
+ <switch
+ id="switch34">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 158px; height: 1px; padding-top: 140px; margin-left: 41px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">OP-TEE</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="120"
+ y="144"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text32">OP-TEE</text>
+ </switch>
+ </g>
+ <rect
+ x="40"
+ y="210"
+ width="160"
+ height="40"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect38" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g44">
+ <switch
+ id="switch42">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 158px; height: 1px; padding-top: 230px; margin-left: 41px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">R5 DM FW</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="120"
+ y="234"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text40">R5 DM FW</text>
+ </switch>
+ </g>
+ <rect
+ x="40"
+ y="250"
+ width="160"
+ height="40"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect46" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g52">
+ <switch
+ id="switch50">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 158px; height: 1px; padding-top: 270px; margin-left: 41px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">Cortex-A SPL</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="120"
+ y="274"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text48">Cortex-A SPL</text>
+ </switch>
+ </g>
+ <rect
+ x="40"
+ y="290"
+ width="160"
+ height="40"
+ fill="none"
+ stroke="rgb(0, 0, 0)"
+ pointer-events="all"
+ id="rect54" />
+ <g
+ transform="translate(-0.5 -0.5)"
+ id="g60">
+ <switch
+ id="switch58">
+ <foreignObject
+ style="overflow: visible; text-align: left;"
+ pointer-events="none"
+ width="100%"
+ height="100%"
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility">
+ <xhtml:div
+ style="display: flex; align-items: unsafe center; justify-content: unsafe center; width: 158px; height: 1px; padding-top: 310px; margin-left: 41px;">
+ <xhtml:div
+ style="box-sizing: border-box; font-size: 0px; text-align: center;"
+ data-drawio-colors="color: rgb(0, 0, 0); ">
+ <xhtml:div
+ style="display: inline-block; font-size: 12px; font-family: Helvetica; color: rgb(0, 0, 0); line-height: 1.2; pointer-events: all; white-space: normal; overflow-wrap: normal;">SPL DTB 1..N</xhtml:div>
+ </xhtml:div>
+ </xhtml:div>
+ </foreignObject>
+ <text
+ x="120"
+ y="314"
+ fill="rgb(0, 0, 0)"
+ font-family="Helvetica"
+ font-size="12px"
+ text-anchor="middle"
+ id="text56">SPL DTB 1..N</text>
+ </switch>
+ </g>
+ </g>
+ <switch
+ id="switch70">
+ <g
+ requiredFeatures="http://www.w3.org/TR/SVG11/feature#Extensibility"
+ id="g64" />
+ <a
+ transform="translate(0,-5)"
+ xlink:href="https://www.drawio.com/doc/faq/svg-export-text-problems"
+ target="_blank"
+ id="a68">
+ <text
+ text-anchor="middle"
+ font-size="10px"
+ x="50%"
+ y="100%"
+ id="text66">Text is not SVG - cannot display</text>
+ </a>
+ </switch>
+</svg>
diff --git a/doc/board/ti/j7200_evm.rst b/doc/board/ti/j7200_evm.rst
index d4a823f..4fd2aff 100644
--- a/doc/board/ti/j7200_evm.rst
+++ b/doc/board/ti/j7200_evm.rst
@@ -47,6 +47,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure:
----------------
0. Setup the environment variables:
diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst
index 80d91ca..41c8d4c 100644
--- a/doc/board/ti/j721e_evm.rst
+++ b/doc/board/ti/j721e_evm.rst
@@ -52,6 +52,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure:
----------------
0. Setup the environment variables:
diff --git a/doc/board/ti/j721s2_evm.rst b/doc/board/ti/j721s2_evm.rst
index f5c48c9..21683b9 100644
--- a/doc/board/ti/j721s2_evm.rst
+++ b/doc/board/ti/j721s2_evm.rst
@@ -60,6 +60,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure:
----------------
diff --git a/doc/board/ti/j722s_evm.rst b/doc/board/ti/j722s_evm.rst
index 10b2439..e5a1be5 100644
--- a/doc/board/ti/j722s_evm.rst
+++ b/doc/board/ti/j722s_evm.rst
@@ -45,6 +45,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure:
----------------
diff --git a/doc/board/ti/j784s4_evm.rst b/doc/board/ti/j784s4_evm.rst
index 2ffec3d..a1e927c 100644
--- a/doc/board/ti/j784s4_evm.rst
+++ b/doc/board/ti/j784s4_evm.rst
@@ -60,6 +60,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_boot_firmwares
+
Build procedure
---------------
0. Setup the environment variables:
diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst
index 67b066a..c3513f0 100644
--- a/doc/board/ti/k3.rst
+++ b/doc/board/ti/k3.rst
@@ -182,24 +182,43 @@
.. note::
- The TI Firmware required for functionality of the system can be
- one of the following combination (see platform specific boot diagram for
- further information as to which component runs on which processor):
+ The TI Firmwares required for functionality of the system are (see
+ platform specific boot diagram for further information as to which
+ component runs on which processor):
- * **TIFS** - TI Foundational Security Firmware - Consists of purely firmware
- meant to run on the security enclave.
- * **DM** - Device Management firmware also called TI System Control Interface
- server (TISCI Server) - This component purely plays the role of managing
- device resources such as power, clock, interrupts, dma etc. This firmware
- runs on a dedicated or multi-use microcontroller outside the security
- enclave.
+.. k3_rst_include_end_boot_sources
- OR
+.. k3_rst_include_start_boot_firmwares
- * **SYSFW** - System firmware - consists of both TIFS and DM both running on
- the security enclave.
+* **TIFS** - TI Foundational Security Firmware - Consists of purely firmware
+ meant to run on the security enclave.
+* **DM** - Device Management firmware also called TI System Control Interface
+ server (TISCI Server) - This component purely plays the role of managing
+ device resources such as power, clock, interrupts, dma etc. This firmware
+ runs on a dedicated or multi-use microcontroller outside the security
+ enclave.
-.. k3_rst_include_end_boot_sources
+.. k3_rst_include_end_boot_firmwares
+.. k3_rst_include_start_tifsstub
+
+* **TIFS Stub** - The TIFS stub is a small piece of binary designed to help
+ restore the required security context and resume the TIFS firmware when
+ the system resumes from low-power modes such as suspend-to-RAM/Deep
+ Sleep. This stub uses the same encryption and customer key signing model
+ as TIFS and is loaded into the ATCM (Tightly Coupled Memory 'A' of the
+ DM R5) during DM startup. Due to the independent certificate signing
+ process, the stub is maintained separately from DM.
+
+.. k3_rst_include_end_tifsstub
+
+OR
+
+.. k3_rst_include_start_boot_firmwares_sysfw
+
+* **SYSFW** - System firmware - consists of both TIFS and DM both running on
+ the security enclave.
+
+.. k3_rst_include_end_boot_firmwares_sysfw
Build Procedure
---------------
diff --git a/doc/board/toradex/verdin-am62.rst b/doc/board/toradex/verdin-am62.rst
index e8d9027..93912ad 100644
--- a/doc/board/toradex/verdin-am62.rst
+++ b/doc/board/toradex/verdin-am62.rst
@@ -29,6 +29,10 @@
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
+.. include:: ../ti/k3.rst
+ :start-after: .. k3_rst_include_start_boot_firmwares
+ :end-before: .. k3_rst_include_end_tifsstub
+
Build procedure:
----------------
diff --git a/doc/develop/release_cycle.rst b/doc/develop/release_cycle.rst
index 776af60..7286375 100644
--- a/doc/develop/release_cycle.rst
+++ b/doc/develop/release_cycle.rst
@@ -71,7 +71,7 @@
* U-Boot v2024.10-rc2 was released on Mon 05 August 2024.
-.. * U-Boot v2024.10-rc3 was released on Mon 19 August 2024.
+* U-Boot v2024.10-rc3 was released on Mon 19 August 2024.
.. * U-Boot v2024.10-rc4 was released on Mon 02 September 2024.
diff --git a/doc/device-tree-bindings/spi/soft-spi.txt b/doc/device-tree-bindings/spi/soft-spi.txt
index bdf7e86..77b01b2 100644
--- a/doc/device-tree-bindings/spi/soft-spi.txt
+++ b/doc/device-tree-bindings/spi/soft-spi.txt
@@ -8,14 +8,15 @@
Mandatory properties:
compatible: "spi-gpio"
-cs-gpios: GPIOs to use for SPI chip select (output)
+cs-gpios: GPIOs to use for SPI chip select (output), not required if num-chipselects = <0>
sck-gpios: GPIO to use for SPI clock (output)
And at least one of:
mosi-gpios: GPIO to use for SPI MOSI line (output)
miso-gpios: GPIO to use for SPI MISO line (input)
-Optional propertie:
+Optional properties:
spi-delay-us: Number of microseconds of delay between each CS transition
+num-chipselects: Number of chipselect lines
The GPIOs should be specified as required by the GPIO controller referenced.
The first cell holds the phandle of the controller and the second cell
diff --git a/doc/usage/cmd/env.rst b/doc/usage/cmd/env.rst
index 9629f97..b65d85b 100644
--- a/doc/usage/cmd/env.rst
+++ b/doc/usage/cmd/env.rst
@@ -79,7 +79,8 @@
environment to their default values.
var
- list of variable name.
+ list of variable names. If variable is not part of default
+ environment, it is deleted with a warning message on console.
\-a
all U-Boot environment.
\-f
@@ -309,6 +310,7 @@
Reset environment variable to default value, in memory::
=> env default bootcmd
+ => env default ipaddr serverip
=> env default -a
Save current environment in persistent storage::
diff --git a/doc/usage/cmd/upl.rst b/doc/usage/cmd/upl.rst
new file mode 100644
index 0000000..8d6ea5d
--- /dev/null
+++ b/doc/usage/cmd/upl.rst
@@ -0,0 +1,186 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+upl command
+===========
+
+Synopsis
+--------
+
+::
+
+ upl write
+ upl read <addr>
+ upl info [-v]
+
+Description
+-----------
+
+The *upl* command is used to test U-Boot's support for the Universal Payload
+Specification (UPL) firmware standard (see :doc:`../upl`). It allows creation of
+a fake handoff for use in testing.
+
+
+upl write
+~~~~~~~~~
+
+Write a fake UPL handoff structure. The `upladdr` environment variable is set to
+the address of this structure and `uplsize` is set to the size.
+
+
+upl read
+~~~~~~~~
+
+Read a UPL handoff structure into internal state. This allows testing that the
+handoff can be obtained.
+
+upl info
+~~~~~~~~
+
+Show basic information about usage of UPL:
+
+ UPL state
+ active or inactive (indicates whether U-Boot booted from UPL or not)
+
+ fit
+ Address of the FIT which was loaded
+
+ conf_offset 2a4
+ FIT offset of the chosen configuration
+
+For each image the following information is shown:
+
+ Image number
+ Images are numbered from 0
+
+ load
+ Address to which the image was loaded
+
+ size
+ Size of the loaded image
+
+ offset
+ FIT offset of the image
+
+ description
+ Description of the image
+
+
+Example
+-------
+
+This shows checking whether a UPL handoff was read at start-up::
+
+ => upl info
+ UPL state: active
+
+This shows how to use the command to write and display the handoff::
+
+ => upl write
+ UPL handoff written to bc8a5e0 size 662
+ => print upladdr
+ upladdr=bc8a5e0
+ => print uplsize
+ uplsize=662
+
+ > fdt addr ${upladdr}
+ Working FDT set to bc8a5e0
+ => fdt print
+ / {
+ #address-cells = <0x00000001>;
+ #size-cells = <0x00000001>;
+ options {
+ upl-params {
+ smbios = <0x00000123>;
+ acpi = <0x00000456>;
+ bootmode = "default", "s3";
+ addr-width = <0x0000002e>;
+ acpi-nvs-size = <0x00000100>;
+ };
+ upl-image {
+ fit = <0x00000789>;
+ conf-offset = <0x00000234>;
+ image-1 {
+ load = <0x00000001>;
+ size = <0x00000002>;
+ offset = <0x00000003>;
+ description = "U-Boot";
+ };
+ image-2 {
+ load = <0x00000004>;
+ size = <0x00000005>;
+ offset = <0x00000006>;
+ description = "ATF";
+ };
+ };
+ };
+ memory@0x10 {
+ reg = <0x00000010 0x00000020 0x00000030 0x00000040 0x00000050 0x00000060>;
+ };
+ memory@0x70 {
+ reg = <0x00000070 0x00000080>;
+ hotpluggable;
+ };
+ memory-map {
+ acpi@0x11 {
+ reg = <0x00000011 0x00000012 0x00000013 0x00000014 0x00000015 0x00000016 0x00000017 0x00000018 0x00000019 0x0000001a>;
+ usage = "acpi-reclaim";
+ };
+ u-boot@0x21 {
+ reg = <0x00000021 0x00000022>;
+ usage = "boot-data";
+ };
+ efi@0x23 {
+ reg = <0x00000023 0x00000024>;
+ usage = "runtime-code";
+ };
+ empty@0x25 {
+ reg = <0x00000025 0x00000026 0x00000027 0x00000028>;
+ };
+ acpi-things@0x2a {
+ reg = <0x0000002a 0x00000000>;
+ usage = "acpi-nvs", "runtime-code";
+ };
+ };
+ reserved-memory {
+ mmio@0x2b {
+ reg = <0x0000002b 0x0000002c>;
+ };
+ memory@0x2d {
+ reg = <0x0000002d 0x0000002e 0x0000002f 0x00000030>;
+ no-map;
+ };
+ };
+ serial@0xf1de0000 {
+ compatible = "ns16550a";
+ clock-frequency = <0x001c2000>;
+ current-speed = <0x0001c200>;
+ reg = <0xf1de0000 0x00000100>;
+ reg-io-shift = <0x00000002>;
+ reg-offset = <0x00000040>;
+ virtual-reg = <0x20000000>;
+ access-type = "mmio";
+ };
+ framebuffer@0xd0000000 {
+ compatible = "simple-framebuffer";
+ reg = <0xd0000000 0x10000000>;
+ width = <0x00000500>;
+ height = <0x00000500>;
+ stride = <0x00001400>;
+ format = "a8r8g8b8";
+ };
+ };
+ =>
+
+This showing reading the handoff into internal state::
+
+ => upl read bc8a5e0
+ Reading UPL at bc8a5e0
+ =>
+
+This shows getting basic information about UPL:
+
+ => upl info -v
+ UPL state: active
+ fit 1264000
+ conf_offset 2a4
+ image 0: load 200000 size 105f5c8 offset a4: U-Boot 2024.07-00770-g739ee12e8358 for sandbox board
diff --git a/doc/usage/index.rst b/doc/usage/index.rst
index 1f6518b..b058c22 100644
--- a/doc/usage/index.rst
+++ b/doc/usage/index.rst
@@ -15,6 +15,7 @@
cmdline
semihosting
measured_boot
+ upl
Shell commands
--------------
@@ -114,6 +115,7 @@
cmd/tftpput
cmd/trace
cmd/true
+ cmd/upl
cmd/ums
cmd/unbind
cmd/ut
diff --git a/doc/usage/upl.rst b/doc/usage/upl.rst
new file mode 100644
index 0000000..3c4a10c
--- /dev/null
+++ b/doc/usage/upl.rst
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Universal Payload
+-----------------
+
+`Universal Payload (UPL) <https://universalpayload.github.io/spec/index.html>`_
+is an Industry Standard for firmware components. UPL
+is designed to improve interoperability within the firmware industry, allowing
+mixing and matching of projects with less friction and fewer project-specific
+implementations. UPL is cross-platform, supporting ARM, x86 and RISC-V
+initially.
+
+UPL is defined in termns of two firmware components:
+
+`Platform Init`
+ Perhaps initial setup of the hardware and jumps to the payload.
+
+`Payload`
+ Selects the OS to boot
+
+In practice UPL can be used to handle any number of handoffs through the
+firmware startup process, with one program acting as platform init and another
+acting as the payload.
+
+UPL provides a standard for three main pieces:
+
+- file format for the payload, which may comprise multiple images to load
+- handoff format for the information the payload needs, such as serial port,
+ memory layout, etc.
+- machine state and register settings at the point of handoff
+
+See also the :doc:`cmd/upl`.
+
+UPL in U-Boot
+~~~~~~~~~~~~~
+
+U-Boot supports:
+
+- writing a UPL handoff (devicetree) in SPL
+- reading a UPL handoff in U-Boot proper
+- creating a FIT
+
+There are some new FIT features in UPL which are not yet supported in U-Boot.
+
+.. sectionauthor:: Simon Glass <sjg@chromium.org>
+.. July 2024
diff --git a/drivers/Makefile b/drivers/Makefile
index 9195daf..1acd94f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0+
+obj-$(CONFIG_$(SPL_TPL_)ADC) += adc/
obj-$(CONFIG_$(SPL_TPL_)BIOSEMU) += bios_emulator/
obj-$(CONFIG_$(SPL_TPL_)BLK) += block/
obj-$(CONFIG_$(SPL_TPL_)BOOTCOUNT_LIMIT) += bootcount/
@@ -81,7 +82,6 @@
ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
-obj-y += adc/
obj-y += ata/
obj-$(CONFIG_DM_DEMO) += demo/
obj-y += block/
diff --git a/drivers/adc/Kconfig b/drivers/adc/Kconfig
index c9cdbe6..37235f5 100644
--- a/drivers/adc/Kconfig
+++ b/drivers/adc/Kconfig
@@ -1,5 +1,6 @@
config ADC
bool "Enable ADC drivers using Driver Model"
+ depends on DM
help
This enables ADC API for drivers, which allows driving ADC features
by single and multi-channel methods for:
@@ -11,6 +12,10 @@
- support supply's phandle with auto-enable
- supply polarity setting in fdt
+config SPL_ADC
+ bool "Enable ADC drivers using Driver Model in SPL"
+ depends on SPL_DM
+
config ADC_EXYNOS
bool "Enable Exynos 54xx ADC driver"
depends on ADC
diff --git a/drivers/adc/Makefile b/drivers/adc/Makefile
index 5336c82..dca0b39 100644
--- a/drivers/adc/Makefile
+++ b/drivers/adc/Makefile
@@ -4,7 +4,7 @@
# Przemyslaw Marczak <p.marczak@samsung.com>
#
-obj-$(CONFIG_ADC) += adc-uclass.o
+obj-$(CONFIG_$(SPL_TPL_)ADC) += adc-uclass.o
obj-$(CONFIG_ADC_EXYNOS) += exynos-adc.o
obj-$(CONFIG_ADC_SANDBOX) += sandbox.o
obj-$(CONFIG_SARADC_ROCKCHIP) += rockchip-saradc.o
diff --git a/drivers/block/blk-uclass.c b/drivers/block/blk-uclass.c
index 512c952..312e038 100644
--- a/drivers/block/blk-uclass.c
+++ b/drivers/block/blk-uclass.c
@@ -36,6 +36,8 @@
{ UCLASS_PVBLOCK, "pvblock" },
{ UCLASS_BLKMAP, "blkmap" },
{ UCLASS_RKMTD, "rkmtd" },
+ { UCLASS_MTD, "mtd" },
+ { UCLASS_MTD, "ubi" },
};
static enum uclass_id uclass_name_to_iftype(const char *uclass_idname)
diff --git a/drivers/block/sandbox.c b/drivers/block/sandbox.c
index ec34f1a..6c74d66 100644
--- a/drivers/block/sandbox.c
+++ b/drivers/block/sandbox.c
@@ -25,7 +25,7 @@
struct udevice *host_dev = dev_get_parent(dev);
struct host_sb_plat *plat = dev_get_plat(host_dev);
- if (os_lseek(plat->fd, start * desc->blksz, OS_SEEK_SET) == -1) {
+ if (os_lseek(plat->fd, start * desc->blksz, OS_SEEK_SET) < 0) {
printf("ERROR: Invalid block %lx\n", start);
return -1;
}
@@ -44,7 +44,7 @@
struct udevice *host_dev = dev_get_parent(dev);
struct host_sb_plat *plat = dev_get_plat(host_dev);
- if (os_lseek(plat->fd, start * desc->blksz, OS_SEEK_SET) == -1) {
+ if (os_lseek(plat->fd, start * desc->blksz, OS_SEEK_SET) < 0) {
printf("ERROR: Invalid block %lx\n", start);
return -1;
}
diff --git a/drivers/clk/clk_zynqmp.c b/drivers/clk/clk_zynqmp.c
index 97f3b99..a8239e2 100644
--- a/drivers/clk/clk_zynqmp.c
+++ b/drivers/clk/clk_zynqmp.c
@@ -726,6 +726,7 @@
case gem_tsu:
case qspi_ref ... can1_ref:
case usb0_bus_ref ... usb3_dual_ref:
+ case dp_video_ref ... dp_stc_ref:
return zynqmp_clk_set_peripheral_rate(priv, id,
rate, two_divs);
default:
diff --git a/drivers/clk/mediatek/clk-mt7622.c b/drivers/clk/mediatek/clk-mt7622.c
index 2beb630..23b9787 100644
--- a/drivers/clk/mediatek/clk-mt7622.c
+++ b/drivers/clk/mediatek/clk-mt7622.c
@@ -66,6 +66,24 @@
21, 0x358, 1, 0x35c, 0),
};
+static const struct mtk_gate_regs apmixed_cg_regs = {
+ .set_ofs = 0x8,
+ .clr_ofs = 0x8,
+ .sta_ofs = 0x8,
+};
+
+#define GATE_APMIXED(_id, _parent, _shift) { \
+ .id = _id, \
+ .parent = _parent, \
+ .regs = &apmixed_cg_regs, \
+ .shift = _shift, \
+ .flags = CLK_GATE_NO_SETCLR_INV, \
+ }
+
+static const struct mtk_gate apmixed_cgs[] = {
+ GATE_APMIXED(CLK_APMIXED_MAIN_CORE_EN, CLK_APMIXED_MAINPLL, 5),
+};
+
/* topckgen */
#define FACTOR0(_id, _parent, _mult, _div) \
FACTOR(_id, _parent, _mult, _div, CLK_PARENT_APMIXED)
@@ -366,6 +384,20 @@
};
/* infracfg */
+#define APMIXED_PARENT(_id) PARENT(_id, CLK_PARENT_APMIXED)
+#define XTAL_PARENT(_id) PARENT(_id, CLK_PARENT_XTAL)
+
+static const struct mtk_parent infra_mux1_parents[] = {
+ XTAL_PARENT(CLK_XTAL),
+ APMIXED_PARENT(CLK_APMIXED_MAINPLL),
+ APMIXED_PARENT(CLK_APMIXED_MAIN_CORE_EN),
+ APMIXED_PARENT(CLK_APMIXED_MAINPLL),
+};
+
+static const struct mtk_composite infra_muxes[] = {
+ MUX_MIXED(CLK_INFRA_MUX1_SEL, infra_mux1_parents, 0x000, 2, 2),
+};
+
static const struct mtk_gate_regs infra_cg_regs = {
.set_ofs = 0x40,
.clr_ofs = 0x44,
@@ -382,14 +414,26 @@
static const struct mtk_gate infra_cgs[] = {
GATE_INFRA(CLK_INFRA_DBGCLK_PD, CLK_TOP_AXI_SEL, 0),
- GATE_INFRA(CLK_INFRA_TRNG, CLK_TOP_AXI_SEL, 2),
GATE_INFRA(CLK_INFRA_AUDIO_PD, CLK_TOP_AUD_INTBUS_SEL, 5),
GATE_INFRA(CLK_INFRA_IRRX_PD, CLK_TOP_IRRX_SEL, 16),
GATE_INFRA(CLK_INFRA_APXGPT_PD, CLK_TOP_F10M_REF_SEL, 18),
GATE_INFRA(CLK_INFRA_PMIC_PD, CLK_TOP_PMICSPI_SEL, 22),
+ GATE_INFRA(CLK_INFRA_TRNG, CLK_TOP_AXI_SEL, 2),
};
/* pericfg */
+static const int peribus_ck_parents[] = {
+ CLK_TOP_SYSPLL1_D8,
+ CLK_TOP_SYSPLL1_D4,
+};
+
+#define PERI_MUX(_id, _parents, _reg, _shift, _width) \
+ MUX_FLAGS(_id, _parents, _reg, _shift, _width, CLK_PARENT_TOPCKGEN)
+
+static const struct mtk_composite peri_muxes[] = {
+ PERI_MUX(CLK_PERIBUS_SEL, peribus_ck_parents, 0x05c, 0, 1),
+};
+
static const struct mtk_gate_regs peri0_cg_regs = {
.set_ofs = 0x8,
.clr_ofs = 0x10,
@@ -402,13 +446,17 @@
.sta_ofs = 0x1C,
};
-#define GATE_PERI0(_id, _parent, _shift) { \
+#define GATE_PERI0_FLAGS(_id, _parent, _shift, _flags) { \
.id = _id, \
.parent = _parent, \
.regs = &peri0_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN, \
+ .flags = _flags, \
}
+#define GATE_PERI0(_id, _parent, _shift) \
+ GATE_PERI0_FLAGS(_id, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
+#define GATE_PERI0_XTAL(_id, _parent, _shift) \
+ GATE_PERI0_FLAGS(_id, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_XTAL)
#define GATE_PERI1(_id, _parent, _shift) { \
.id = _id, \
@@ -421,14 +469,14 @@
static const struct mtk_gate peri_cgs[] = {
/* PERI0 */
GATE_PERI0(CLK_PERI_THERM_PD, CLK_TOP_AXI_SEL, 1),
- GATE_PERI0(CLK_PERI_PWM1_PD, CLK_XTAL, 2),
- GATE_PERI0(CLK_PERI_PWM2_PD, CLK_XTAL, 3),
- GATE_PERI0(CLK_PERI_PWM3_PD, CLK_XTAL, 4),
- GATE_PERI0(CLK_PERI_PWM4_PD, CLK_XTAL, 5),
- GATE_PERI0(CLK_PERI_PWM5_PD, CLK_XTAL, 6),
- GATE_PERI0(CLK_PERI_PWM6_PD, CLK_XTAL, 7),
- GATE_PERI0(CLK_PERI_PWM7_PD, CLK_XTAL, 8),
- GATE_PERI0(CLK_PERI_PWM_PD, CLK_XTAL, 9),
+ GATE_PERI0_XTAL(CLK_PERI_PWM1_PD, CLK_XTAL, 2),
+ GATE_PERI0_XTAL(CLK_PERI_PWM2_PD, CLK_XTAL, 3),
+ GATE_PERI0_XTAL(CLK_PERI_PWM3_PD, CLK_XTAL, 4),
+ GATE_PERI0_XTAL(CLK_PERI_PWM4_PD, CLK_XTAL, 5),
+ GATE_PERI0_XTAL(CLK_PERI_PWM5_PD, CLK_XTAL, 6),
+ GATE_PERI0_XTAL(CLK_PERI_PWM6_PD, CLK_XTAL, 7),
+ GATE_PERI0_XTAL(CLK_PERI_PWM7_PD, CLK_XTAL, 8),
+ GATE_PERI0_XTAL(CLK_PERI_PWM_PD, CLK_XTAL, 9),
GATE_PERI0(CLK_PERI_AP_DMA_PD, CLK_TOP_AXI_SEL, 12),
GATE_PERI0(CLK_PERI_MSDC30_0_PD, CLK_TOP_MSDC30_0_SEL, 13),
GATE_PERI0(CLK_PERI_MSDC30_1_PD, CLK_TOP_MSDC30_1_SEL, 14),
@@ -436,12 +484,13 @@
GATE_PERI0(CLK_PERI_UART1_PD, CLK_TOP_AXI_SEL, 18),
GATE_PERI0(CLK_PERI_UART2_PD, CLK_TOP_AXI_SEL, 19),
GATE_PERI0(CLK_PERI_UART3_PD, CLK_TOP_AXI_SEL, 20),
+ GATE_PERI0(CLK_PERI_UART4_PD, CLK_TOP_AXI_SEL, 21),
GATE_PERI0(CLK_PERI_BTIF_PD, CLK_TOP_AXI_SEL, 22),
GATE_PERI0(CLK_PERI_I2C0_PD, CLK_TOP_AXI_SEL, 23),
GATE_PERI0(CLK_PERI_I2C1_PD, CLK_TOP_AXI_SEL, 24),
GATE_PERI0(CLK_PERI_I2C2_PD, CLK_TOP_AXI_SEL, 25),
GATE_PERI0(CLK_PERI_SPI1_PD, CLK_TOP_SPI1_SEL, 26),
- GATE_PERI0(CLK_PERI_AUXADC_PD, CLK_XTAL, 27),
+ GATE_PERI0_XTAL(CLK_PERI_AUXADC_PD, CLK_XTAL, 27),
GATE_PERI0(CLK_PERI_SPI0_PD, CLK_TOP_SPI0_SEL, 28),
GATE_PERI0(CLK_PERI_SNFI_PD, CLK_TOP_NFI_INFRA_SEL, 29),
GATE_PERI0(CLK_PERI_NFI_PD, CLK_TOP_AXI_SEL, 30),
@@ -550,12 +599,33 @@
GATE_SSUSB(CLK_SSUSB_DMA_EN, CLK_TOP_HIF_SEL, 8),
};
+static const struct mtk_clk_tree mt7622_apmixed_clk_tree = {
+ .xtal2_rate = 25 * MHZ,
+ .plls = apmixed_plls,
+ .gates_offs = CLK_APMIXED_MAIN_CORE_EN,
+ .gates = apmixed_cgs,
+};
+
+static const struct mtk_clk_tree mt7622_infra_clk_tree = {
+ .xtal_rate = 25 * MHZ,
+ .muxes_offs = CLK_INFRA_MUX1_SEL,
+ .gates_offs = CLK_INFRA_DBGCLK_PD,
+ .muxes = infra_muxes,
+ .gates = infra_cgs,
+};
+
+static const struct mtk_clk_tree mt7622_peri_clk_tree = {
+ .xtal_rate = 25 * MHZ,
+ .muxes_offs = CLK_PERIBUS_SEL,
+ .gates_offs = CLK_PERI_THERM_PD,
+ .muxes = peri_muxes,
+ .gates = peri_cgs,
+};
+
static const struct mtk_clk_tree mt7622_clk_tree = {
.xtal_rate = 25 * MHZ,
- .xtal2_rate = 25 * MHZ,
.fdivs_offs = CLK_TOP_TO_USB3_SYS,
.muxes_offs = CLK_TOP_AXI_SEL,
- .plls = apmixed_plls,
.fclks = top_fixed_clks,
.fdivs = top_fixed_divs,
.muxes = top_muxes,
@@ -582,7 +652,7 @@
struct mtk_clk_priv *priv = dev_get_priv(dev);
int ret;
- ret = mtk_common_clk_init(dev, &mt7622_clk_tree);
+ ret = mtk_common_clk_init(dev, &mt7622_apmixed_clk_tree);
if (ret)
return ret;
@@ -603,12 +673,12 @@
static int mt7622_infracfg_probe(struct udevice *dev)
{
- return mtk_common_clk_gate_init(dev, &mt7622_clk_tree, infra_cgs);
+ return mtk_common_clk_infrasys_init(dev, &mt7622_infra_clk_tree);
}
static int mt7622_pericfg_probe(struct udevice *dev)
{
- return mtk_common_clk_gate_init(dev, &mt7622_clk_tree, peri_cgs);
+ return mtk_common_clk_infrasys_init(dev, &mt7622_peri_clk_tree);
}
static int mt7622_pciesys_probe(struct udevice *dev)
diff --git a/drivers/clk/mediatek/clk-mt7623.c b/drivers/clk/mediatek/clk-mt7623.c
index 5072c99..d0b80f4 100644
--- a/drivers/clk/mediatek/clk-mt7623.c
+++ b/drivers/clk/mediatek/clk-mt7623.c
@@ -25,6 +25,22 @@
#define AXI_DIV_SEL(x) (x)
/* apmixedsys */
+static const int pll_id_offs_map[] = {
+ [CLK_APMIXED_ARMPLL] = 0,
+ [CLK_APMIXED_MAINPLL] = 1,
+ [CLK_APMIXED_UNIVPLL] = 2,
+ [CLK_APMIXED_MMPLL] = 3,
+ [CLK_APMIXED_MSDCPLL] = 4,
+ [CLK_APMIXED_TVDPLL] = 5,
+ [CLK_APMIXED_AUD1PLL] = 6,
+ [CLK_APMIXED_TRGPLL] = 7,
+ [CLK_APMIXED_ETHPLL] = 8,
+ [CLK_APMIXED_VDECPLL] = 9,
+ [CLK_APMIXED_HADDS2PLL] = 10,
+ [CLK_APMIXED_AUD2PLL] = 11,
+ [CLK_APMIXED_TVD2PLL] = 12,
+};
+
#define PLL(_id, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, \
_pd_shift, _pcw_reg, _pcw_shift) { \
.id = _id, \
@@ -71,6 +87,176 @@
};
/* topckgen */
+
+/* Fixed CLK exposed upstream by the hdmi PHY driver */
+#define CLK_TOP_HDMITX_CLKDIG_CTS CLK_TOP_NR
+
+static const int top_id_offs_map[CLK_TOP_NR + 1] = {
+ /* Fixed CLK */
+ [CLK_TOP_DPI] = 0,
+ [CLK_TOP_DMPLL] = 1,
+ [CLK_TOP_VENCPLL] = 2,
+ [CLK_TOP_HDMI_0_PIX340M] = 3,
+ [CLK_TOP_HDMI_0_DEEP340M] = 4,
+ [CLK_TOP_HDMI_0_PLL340M] = 5,
+ [CLK_TOP_HADDS2_FB] = 6,
+ [CLK_TOP_WBG_DIG_416M] = 7,
+ [CLK_TOP_DSI0_LNTC_DSI] = 8,
+ [CLK_TOP_HDMI_SCL_RX] = 9,
+ [CLK_TOP_32K_EXTERNAL] = 10,
+ [CLK_TOP_HDMITX_CLKDIG_CTS] = 11,
+ [CLK_TOP_AUD_EXT1] = 12,
+ [CLK_TOP_AUD_EXT2] = 13,
+ [CLK_TOP_NFI1X_PAD] = 14,
+ /* Factor CLK */
+ [CLK_TOP_SYSPLL] = 15,
+ [CLK_TOP_SYSPLL_D2] = 16,
+ [CLK_TOP_SYSPLL_D3] = 17,
+ [CLK_TOP_SYSPLL_D5] = 18,
+ [CLK_TOP_SYSPLL_D7] = 19,
+ [CLK_TOP_SYSPLL1_D2] = 20,
+ [CLK_TOP_SYSPLL1_D4] = 21,
+ [CLK_TOP_SYSPLL1_D8] = 22,
+ [CLK_TOP_SYSPLL1_D16] = 23,
+ [CLK_TOP_SYSPLL2_D2] = 24,
+ [CLK_TOP_SYSPLL2_D4] = 25,
+ [CLK_TOP_SYSPLL2_D8] = 26,
+ [CLK_TOP_SYSPLL3_D2] = 27,
+ [CLK_TOP_SYSPLL3_D4] = 28,
+ [CLK_TOP_SYSPLL4_D2] = 29,
+ [CLK_TOP_SYSPLL4_D4] = 30,
+ [CLK_TOP_UNIVPLL] = 31,
+ [CLK_TOP_UNIVPLL_D2] = 32,
+ [CLK_TOP_UNIVPLL_D3] = 33,
+ [CLK_TOP_UNIVPLL_D5] = 34,
+ [CLK_TOP_UNIVPLL_D7] = 35,
+ [CLK_TOP_UNIVPLL_D26] = 36,
+ [CLK_TOP_UNIVPLL_D52] = 37,
+ [CLK_TOP_UNIVPLL_D108] = 38,
+ [CLK_TOP_USB_PHY48M] = 39,
+ [CLK_TOP_UNIVPLL1_D2] = 40,
+ [CLK_TOP_UNIVPLL1_D4] = 41,
+ [CLK_TOP_UNIVPLL1_D8] = 42,
+ [CLK_TOP_UNIVPLL2_D2] = 43,
+ [CLK_TOP_UNIVPLL2_D4] = 44,
+ [CLK_TOP_UNIVPLL2_D8] = 45,
+ [CLK_TOP_UNIVPLL2_D16] = 46,
+ [CLK_TOP_UNIVPLL2_D32] = 47,
+ [CLK_TOP_UNIVPLL3_D2] = 48,
+ [CLK_TOP_UNIVPLL3_D4] = 49,
+ [CLK_TOP_UNIVPLL3_D8] = 50,
+ [CLK_TOP_MSDCPLL] = 51,
+ [CLK_TOP_MSDCPLL_D2] = 52,
+ [CLK_TOP_MSDCPLL_D4] = 53,
+ [CLK_TOP_MSDCPLL_D8] = 54,
+ [CLK_TOP_MMPLL] = 55,
+ [CLK_TOP_MMPLL_D2] = 56,
+ [CLK_TOP_DMPLL_D2] = 57,
+ [CLK_TOP_DMPLL_D4] = 58,
+ [CLK_TOP_DMPLL_X2] = 59,
+ [CLK_TOP_TVDPLL] = 60,
+ [CLK_TOP_TVDPLL_D2] = 61,
+ [CLK_TOP_TVDPLL_D4] = 62,
+ [CLK_TOP_VDECPLL] = 63,
+ [CLK_TOP_TVD2PLL] = 64,
+ [CLK_TOP_TVD2PLL_D2] = 65,
+ [CLK_TOP_MIPIPLL] = 66,
+ [CLK_TOP_MIPIPLL_D2] = 67,
+ [CLK_TOP_MIPIPLL_D4] = 68,
+ [CLK_TOP_HDMIPLL] = 69,
+ [CLK_TOP_HDMIPLL_D2] = 70,
+ [CLK_TOP_HDMIPLL_D3] = 71,
+ [CLK_TOP_ARMPLL_1P3G] = 72,
+ [CLK_TOP_AUDPLL] = 73,
+ [CLK_TOP_AUDPLL_D4] = 74,
+ [CLK_TOP_AUDPLL_D8] = 75,
+ [CLK_TOP_AUDPLL_D16] = 76,
+ [CLK_TOP_AUDPLL_D24] = 77,
+ [CLK_TOP_AUD1PLL_98M] = 78,
+ [CLK_TOP_AUD2PLL_90M] = 79,
+ [CLK_TOP_HADDS2PLL_98M] = 80,
+ [CLK_TOP_HADDS2PLL_294M] = 81,
+ [CLK_TOP_ETHPLL_500M] = 82,
+ [CLK_TOP_CLK26M_D8] = 83,
+ [CLK_TOP_32K_INTERNAL] = 84,
+ [CLK_TOP_AXISEL_D4] = 85,
+ [CLK_TOP_8BDAC] = 86,
+ /* MUX CLK */
+ [CLK_TOP_AXI_SEL] = 87,
+ [CLK_TOP_MEM_SEL] = 88,
+ [CLK_TOP_DDRPHYCFG_SEL] = 89,
+ [CLK_TOP_MM_SEL] = 90,
+ [CLK_TOP_PWM_SEL] = 91,
+ [CLK_TOP_VDEC_SEL] = 92,
+ [CLK_TOP_MFG_SEL] = 93,
+ [CLK_TOP_CAMTG_SEL] = 94,
+ [CLK_TOP_UART_SEL] = 95,
+ [CLK_TOP_SPI0_SEL] = 96,
+ [CLK_TOP_USB20_SEL] = 97,
+ [CLK_TOP_MSDC30_0_SEL] = 98,
+ [CLK_TOP_MSDC30_1_SEL] = 99,
+ [CLK_TOP_MSDC30_2_SEL] = 100,
+ [CLK_TOP_AUDIO_SEL] = 101,
+ [CLK_TOP_AUDINTBUS_SEL] = 102,
+ [CLK_TOP_PMICSPI_SEL] = 103,
+ [CLK_TOP_SCP_SEL] = 104,
+ [CLK_TOP_DPI0_SEL] = 105,
+ [CLK_TOP_DPI1_SEL] = 106,
+ [CLK_TOP_TVE_SEL] = 107,
+ [CLK_TOP_HDMI_SEL] = 108,
+ [CLK_TOP_APLL_SEL] = 109,
+ [CLK_TOP_RTC_SEL] = 110,
+ [CLK_TOP_NFI2X_SEL] = 111,
+ [CLK_TOP_EMMC_HCLK_SEL] = 112,
+ [CLK_TOP_FLASH_SEL] = 113,
+ [CLK_TOP_DI_SEL] = 114,
+ [CLK_TOP_NR_SEL] = 115,
+ [CLK_TOP_OSD_SEL] = 116,
+ [CLK_TOP_HDMIRX_BIST_SEL] = 117,
+ [CLK_TOP_INTDIR_SEL] = 118,
+ [CLK_TOP_ASM_I_SEL] = 119,
+ [CLK_TOP_ASM_M_SEL] = 120,
+ [CLK_TOP_ASM_H_SEL] = 121,
+ [CLK_TOP_MS_CARD_SEL] = 122,
+ [CLK_TOP_ETHIF_SEL] = 123,
+ [CLK_TOP_HDMIRX26_24_SEL] = 124,
+ [CLK_TOP_MSDC30_3_SEL] = 125,
+ [CLK_TOP_CMSYS_SEL] = 126,
+ [CLK_TOP_SPI1_SEL] = 127,
+ [CLK_TOP_SPI2_SEL] = 128,
+ [CLK_TOP_8BDAC_SEL] = 129,
+ [CLK_TOP_AUD2DVD_SEL] = 130,
+ [CLK_TOP_PADMCLK_SEL] = 131,
+ [CLK_TOP_AUD_MUX1_SEL] = 132,
+ [CLK_TOP_AUD_MUX2_SEL] = 133,
+ [CLK_TOP_AUDPLL_MUX_SEL] = 134,
+ [CLK_TOP_AUD_K1_SRC_SEL] = 135,
+ [CLK_TOP_AUD_K2_SRC_SEL] = 136,
+ [CLK_TOP_AUD_K3_SRC_SEL] = 137,
+ [CLK_TOP_AUD_K4_SRC_SEL] = 138,
+ [CLK_TOP_AUD_K5_SRC_SEL] = 139,
+ [CLK_TOP_AUD_K6_SRC_SEL] = 140,
+ /* Misc CLK only used as parents */
+ [CLK_TOP_AUD_EXTCK1_DIV] = 141,
+ [CLK_TOP_AUD_EXTCK2_DIV] = 142,
+ [CLK_TOP_AUD_MUX1_DIV] = 143,
+ [CLK_TOP_AUD_MUX2_DIV] = 144,
+ [CLK_TOP_AUD_K1_SRC_DIV] = 145,
+ [CLK_TOP_AUD_K2_SRC_DIV] = 146,
+ [CLK_TOP_AUD_K3_SRC_DIV] = 147,
+ [CLK_TOP_AUD_K4_SRC_DIV] = 148,
+ [CLK_TOP_AUD_K5_SRC_DIV] = 149,
+ [CLK_TOP_AUD_K6_SRC_DIV] = 150,
+ [CLK_TOP_AUD_48K_TIMING] = 151,
+ [CLK_TOP_AUD_44K_TIMING] = 152,
+ [CLK_TOP_AUD_I2S1_MCLK] = 153,
+ [CLK_TOP_AUD_I2S2_MCLK] = 154,
+ [CLK_TOP_AUD_I2S3_MCLK] = 155,
+ [CLK_TOP_AUD_I2S4_MCLK] = 156,
+ [CLK_TOP_AUD_I2S5_MCLK] = 157,
+ [CLK_TOP_AUD_I2S6_MCLK] = 158,
+};
+
#define FACTOR0(_id, _parent, _mult, _div) \
FACTOR(_id, _parent, _mult, _div, CLK_PARENT_APMIXED)
@@ -586,21 +772,26 @@
.sta_ofs = 0x48,
};
-#define GATE_INFRA(_id, _parent, _shift) { \
+#define GATE_INFRA_FLAGS(_id, _parent, _shift, _flags) { \
.id = _id, \
.parent = _parent, \
.regs = &infra_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN, \
+ .flags = _flags, \
}
+#define GATE_INFRA(_id, _parent, _shift) \
+ GATE_INFRA_FLAGS(_id, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
+#define GATE_INFRA_XTAL(_id, _parent, _shift) \
+ GATE_INFRA_FLAGS(_id, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_XTAL)
+
static const struct mtk_gate infra_cgs[] = {
GATE_INFRA(CLK_INFRA_DBG, CLK_TOP_AXI_SEL, 0),
GATE_INFRA(CLK_INFRA_SMI, CLK_TOP_MM_SEL, 1),
GATE_INFRA(CLK_INFRA_QAXI_CM4, CLK_TOP_AXI_SEL, 2),
GATE_INFRA(CLK_INFRA_AUD_SPLIN_B, CLK_TOP_HADDS2PLL_294M, 4),
- GATE_INFRA(CLK_INFRA_AUDIO, CLK_XTAL, 5),
- GATE_INFRA(CLK_INFRA_EFUSE, CLK_XTAL, 6),
+ GATE_INFRA_XTAL(CLK_INFRA_AUDIO, CLK_XTAL, 5),
+ GATE_INFRA_XTAL(CLK_INFRA_EFUSE, CLK_XTAL, 6),
GATE_INFRA(CLK_INFRA_L2C_SRAM, CLK_TOP_MM_SEL, 7),
GATE_INFRA(CLK_INFRA_M4U, CLK_TOP_MEM_SEL, 8),
GATE_INFRA(CLK_INFRA_CONNMCU, CLK_TOP_WBG_DIG_416M, 12),
@@ -616,6 +807,74 @@
};
/* pericfg */
+static const int peri_id_offs_map[] = {
+ /* MUX CLK */
+ [CLK_PERI_UART0_SEL] = 1,
+ [CLK_PERI_UART1_SEL] = 2,
+ [CLK_PERI_UART2_SEL] = 3,
+ [CLK_PERI_UART3_SEL] = 4,
+ /* GATE CLK */
+ [CLK_PERI_NFI] = 5,
+ [CLK_PERI_THERM] = 6,
+ [CLK_PERI_PWM1] = 7,
+ [CLK_PERI_PWM2] = 8,
+ [CLK_PERI_PWM3] = 9,
+ [CLK_PERI_PWM4] = 10,
+ [CLK_PERI_PWM5] = 11,
+ [CLK_PERI_PWM6] = 12,
+ [CLK_PERI_PWM7] = 13,
+ [CLK_PERI_PWM] = 14,
+ [CLK_PERI_USB0] = 15,
+ [CLK_PERI_USB1] = 16,
+ [CLK_PERI_AP_DMA] = 17,
+ [CLK_PERI_MSDC30_0] = 18,
+ [CLK_PERI_MSDC30_1] = 19,
+ [CLK_PERI_MSDC30_2] = 20,
+ [CLK_PERI_MSDC30_3] = 21,
+ [CLK_PERI_MSDC50_3] = 22,
+ [CLK_PERI_NLI] = 23,
+ [CLK_PERI_UART0] = 24,
+ [CLK_PERI_UART1] = 25,
+ [CLK_PERI_UART2] = 26,
+ [CLK_PERI_UART3] = 27,
+ [CLK_PERI_BTIF] = 28,
+ [CLK_PERI_I2C0] = 29,
+ [CLK_PERI_I2C1] = 30,
+ [CLK_PERI_I2C2] = 31,
+ [CLK_PERI_I2C3] = 32,
+ [CLK_PERI_AUXADC] = 33,
+ [CLK_PERI_SPI0] = 34,
+ [CLK_PERI_ETH] = 35,
+ [CLK_PERI_USB0_MCU] = 36,
+ [CLK_PERI_USB1_MCU] = 37,
+ [CLK_PERI_USB_SLV] = 38,
+ [CLK_PERI_GCPU] = 39,
+ [CLK_PERI_NFI_ECC] = 40,
+ [CLK_PERI_NFI_PAD] = 41,
+ [CLK_PERI_FLASH] = 42,
+ [CLK_PERI_HOST89_INT] = 43,
+ [CLK_PERI_HOST89_SPI] = 44,
+ [CLK_PERI_HOST89_DVD] = 45,
+ [CLK_PERI_SPI1] = 46,
+ [CLK_PERI_SPI2] = 47,
+ [CLK_PERI_FCI] = 48,
+};
+
+#define TOP_PARENT(_id) PARENT(_id, CLK_PARENT_TOPCKGEN)
+#define XTAL_PARENT(_id) PARENT(_id, CLK_PARENT_XTAL)
+
+static const struct mtk_parent uart_ck_sel_parents[] = {
+ XTAL_PARENT(CLK_XTAL),
+ TOP_PARENT(CLK_TOP_UART_SEL),
+};
+
+static const struct mtk_composite peri_muxes[] = {
+ MUX_MIXED(CLK_PERI_UART0_SEL, uart_ck_sel_parents, 0x40C, 0, 1),
+ MUX_MIXED(CLK_PERI_UART1_SEL, uart_ck_sel_parents, 0x40C, 1, 1),
+ MUX_MIXED(CLK_PERI_UART2_SEL, uart_ck_sel_parents, 0x40C, 2, 1),
+ MUX_MIXED(CLK_PERI_UART3_SEL, uart_ck_sel_parents, 0x40C, 3, 1),
+};
+
static const struct mtk_gate_regs peri0_cg_regs = {
.set_ofs = 0x8,
.clr_ofs = 0x10,
@@ -628,13 +887,17 @@
.sta_ofs = 0x1C,
};
-#define GATE_PERI0(_id, _parent, _shift) { \
+#define GATE_PERI0_FLAGS(_id, _parent, _shift, _flags) { \
.id = _id, \
.parent = _parent, \
.regs = &peri0_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN, \
+ .flags = _flags, \
}
+#define GATE_PERI0(_id, _parent, _shift) \
+ GATE_PERI0_FLAGS(_id, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
+#define GATE_PERI0_XTAL(_id, _parent, _shift) \
+ GATE_PERI0_FLAGS(_id, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_XTAL)
#define GATE_PERI1(_id, _parent, _shift) { \
.id = _id, \
@@ -672,10 +935,10 @@
GATE_PERI0(CLK_PERI_I2C0, CLK_TOP_AXI_SEL, 24),
GATE_PERI0(CLK_PERI_I2C1, CLK_TOP_AXI_SEL, 25),
GATE_PERI0(CLK_PERI_I2C2, CLK_TOP_AXI_SEL, 26),
- GATE_PERI0(CLK_PERI_I2C3, CLK_XTAL, 27),
- GATE_PERI0(CLK_PERI_AUXADC, CLK_XTAL, 28),
+ GATE_PERI0_XTAL(CLK_PERI_I2C3, CLK_XTAL, 27),
+ GATE_PERI0_XTAL(CLK_PERI_AUXADC, CLK_XTAL, 28),
GATE_PERI0(CLK_PERI_SPI0, CLK_TOP_SPI0_SEL, 29),
- GATE_PERI0(CLK_PERI_ETH, CLK_XTAL, 30),
+ GATE_PERI0_XTAL(CLK_PERI_ETH, CLK_XTAL, 30),
GATE_PERI0(CLK_PERI_USB0_MCU, CLK_TOP_AXI_SEL, 31),
GATE_PERI1(CLK_PERI_USB1_MCU, CLK_TOP_AXI_SEL, 0),
@@ -730,12 +993,17 @@
GATE_ETH_HIF1(CLK_HIFSYS_PCIE2, CLK_TOP_ETHPLL_500M, 26),
};
-static const struct mtk_clk_tree mt7623_clk_tree = {
- .xtal_rate = 26 * MHZ,
+static const struct mtk_clk_tree mt7623_apmixedsys_clk_tree = {
.xtal2_rate = 26 * MHZ,
- .fdivs_offs = CLK_TOP_SYSPLL,
- .muxes_offs = CLK_TOP_AXI_SEL,
+ .id_offs_map = pll_id_offs_map,
.plls = apmixed_plls,
+};
+
+static const struct mtk_clk_tree mt7623_topckgen_clk_tree = {
+ .xtal_rate = 26 * MHZ,
+ .id_offs_map = top_id_offs_map,
+ .fdivs_offs = top_id_offs_map[CLK_TOP_SYSPLL],
+ .muxes_offs = top_id_offs_map[CLK_TOP_AXI_SEL],
.fclks = top_fixed_clks,
.fdivs = top_fixed_divs,
.muxes = top_muxes,
@@ -760,7 +1028,7 @@
struct mtk_clk_priv *priv = dev_get_priv(dev);
int ret;
- ret = mtk_common_clk_init(dev, &mt7623_clk_tree);
+ ret = mtk_common_clk_init(dev, &mt7623_apmixedsys_clk_tree);
if (ret)
return ret;
@@ -774,27 +1042,45 @@
static int mt7623_topckgen_probe(struct udevice *dev)
{
- return mtk_common_clk_init(dev, &mt7623_clk_tree);
+ return mtk_common_clk_init(dev, &mt7623_topckgen_clk_tree);
}
+static const struct mtk_clk_tree mt7623_clk_gate_tree = {
+ /* Each CLK ID for gates clock starts at index 1 */
+ .gates_offs = 1,
+ .xtal_rate = 26 * MHZ,
+};
+
static int mt7623_infracfg_probe(struct udevice *dev)
{
- return mtk_common_clk_gate_init(dev, &mt7623_clk_tree, infra_cgs);
+ return mtk_common_clk_gate_init(dev, &mt7623_clk_gate_tree,
+ infra_cgs);
}
+static const struct mtk_clk_tree mt7623_clk_peri_tree = {
+ .id_offs_map = peri_id_offs_map,
+ .muxes_offs = peri_id_offs_map[CLK_PERI_UART0_SEL],
+ .gates_offs = peri_id_offs_map[CLK_PERI_NFI],
+ .muxes = peri_muxes,
+ .gates = peri_cgs,
+ .xtal_rate = 26 * MHZ,
+};
+
static int mt7623_pericfg_probe(struct udevice *dev)
{
- return mtk_common_clk_gate_init(dev, &mt7623_clk_tree, peri_cgs);
+ return mtk_common_clk_infrasys_init(dev, &mt7623_clk_peri_tree);
}
static int mt7623_hifsys_probe(struct udevice *dev)
{
- return mtk_common_clk_gate_init(dev, &mt7623_clk_tree, hif_cgs);
+ return mtk_common_clk_gate_init(dev, &mt7623_clk_gate_tree,
+ hif_cgs);
}
static int mt7623_ethsys_probe(struct udevice *dev)
{
- return mtk_common_clk_gate_init(dev, &mt7623_clk_tree, eth_cgs);
+ return mtk_common_clk_gate_init(dev, &mt7623_clk_gate_tree,
+ eth_cgs);
}
static int mt7623_ethsys_hifsys_bind(struct udevice *dev)
@@ -889,7 +1175,7 @@
.of_match = mt7623_pericfg_compat,
.probe = mt7623_pericfg_probe,
.priv_auto = sizeof(struct mtk_cg_priv),
- .ops = &mtk_clk_gate_ops,
+ .ops = &mtk_clk_infrasys_ops,
.flags = DM_FLAG_PRE_RELOC,
};
diff --git a/drivers/clk/mediatek/clk-mt7981.c b/drivers/clk/mediatek/clk-mt7981.c
index 13dc3df..9707391 100644
--- a/drivers/clk/mediatek/clk-mt7981.c
+++ b/drivers/clk/mediatek/clk-mt7981.c
@@ -29,204 +29,204 @@
/* FIXED PLLS */
static const struct mtk_fixed_clk fixed_pll_clks[] = {
- FIXED_CLK(CK_APMIXED_ARMPLL, CLK_XTAL, 1300000000),
- FIXED_CLK(CK_APMIXED_NET2PLL, CLK_XTAL, 800000000),
- FIXED_CLK(CK_APMIXED_MMPLL, CLK_XTAL, 720000000),
- FIXED_CLK(CK_APMIXED_SGMPLL, CLK_XTAL, 325000000),
- FIXED_CLK(CK_APMIXED_WEDMCUPLL, CLK_XTAL, 208000000),
- FIXED_CLK(CK_APMIXED_NET1PLL, CLK_XTAL, 2500000000),
- FIXED_CLK(CK_APMIXED_MPLL, CLK_XTAL, 416000000),
- FIXED_CLK(CK_APMIXED_APLL2, CLK_XTAL, 196608000),
+ FIXED_CLK(CLK_APMIXED_ARMPLL, CLK_XTAL, 1300000000),
+ FIXED_CLK(CLK_APMIXED_NET2PLL, CLK_XTAL, 800000000),
+ FIXED_CLK(CLK_APMIXED_MMPLL, CLK_XTAL, 720000000),
+ FIXED_CLK(CLK_APMIXED_SGMPLL, CLK_XTAL, 325000000),
+ FIXED_CLK(CLK_APMIXED_WEDMCUPLL, CLK_XTAL, 208000000),
+ FIXED_CLK(CLK_APMIXED_NET1PLL, CLK_XTAL, 2500000000),
+ FIXED_CLK(CLK_APMIXED_MPLL, CLK_XTAL, 416000000),
+ FIXED_CLK(CLK_APMIXED_APLL2, CLK_XTAL, 196608000),
};
/* TOPCKGEN FIXED CLK */
static const struct mtk_fixed_clk top_fixed_clks[] = {
- FIXED_CLK(CK_TOP_CB_CKSQ_40M, CLK_XTAL, 40000000),
+ FIXED_CLK(CLK_TOP_CB_CKSQ_40M, CLK_XTAL, 40000000),
};
/* TOPCKGEN FIXED DIV */
static const struct mtk_fixed_factor top_fixed_divs[] = {
- PLL_FACTOR(CK_TOP_CB_M_416M, "cb_m_416m", CK_APMIXED_MPLL, 1, 1),
- PLL_FACTOR(CK_TOP_CB_M_D2, "cb_m_d2", CK_APMIXED_MPLL, 1, 2),
- PLL_FACTOR(CK_TOP_CB_M_D3, "cb_m_d3", CK_APMIXED_MPLL, 1, 3),
- PLL_FACTOR(CK_TOP_M_D3_D2, "m_d3_d2", CK_APMIXED_MPLL, 1, 2),
- PLL_FACTOR(CK_TOP_CB_M_D4, "cb_m_d4", CK_APMIXED_MPLL, 1, 4),
- PLL_FACTOR(CK_TOP_CB_M_D8, "cb_m_d8", CK_APMIXED_MPLL, 1, 8),
- PLL_FACTOR(CK_TOP_M_D8_D2, "m_d8_d2", CK_APMIXED_MPLL, 1, 16),
- PLL_FACTOR(CK_TOP_CB_MM_720M, "cb_mm_720m", CK_APMIXED_MMPLL, 1, 1),
- PLL_FACTOR(CK_TOP_CB_MM_D2, "cb_mm_d2", CK_APMIXED_MMPLL, 1, 2),
- PLL_FACTOR(CK_TOP_CB_MM_D3, "cb_mm_d3", CK_APMIXED_MMPLL, 1, 3),
- PLL_FACTOR(CK_TOP_CB_MM_D3_D5, "cb_mm_d3_d5", CK_APMIXED_MMPLL, 1, 15),
- PLL_FACTOR(CK_TOP_CB_MM_D4, "cb_mm_d4", CK_APMIXED_MMPLL, 1, 4),
- PLL_FACTOR(CK_TOP_CB_MM_D6, "cb_mm_d6", CK_APMIXED_MMPLL, 1, 6),
- PLL_FACTOR(CK_TOP_MM_D6_D2, "mm_d6_d2", CK_APMIXED_MMPLL, 1, 12),
- PLL_FACTOR(CK_TOP_CB_MM_D8, "cb_mm_d8", CK_APMIXED_MMPLL, 1, 8),
- PLL_FACTOR(CK_TOP_CB_APLL2_196M, "cb_apll2_196m", CK_APMIXED_APLL2, 1,
+ PLL_FACTOR(CLK_TOP_CB_M_416M, "cb_m_416m", CLK_APMIXED_MPLL, 1, 1),
+ PLL_FACTOR(CLK_TOP_CB_M_D2, "cb_m_d2", CLK_APMIXED_MPLL, 1, 2),
+ PLL_FACTOR(CLK_TOP_CB_M_D3, "cb_m_d3", CLK_APMIXED_MPLL, 1, 3),
+ PLL_FACTOR(CLK_TOP_M_D3_D2, "m_d3_d2", CLK_APMIXED_MPLL, 1, 2),
+ PLL_FACTOR(CLK_TOP_CB_M_D4, "cb_m_d4", CLK_APMIXED_MPLL, 1, 4),
+ PLL_FACTOR(CLK_TOP_CB_M_D8, "cb_m_d8", CLK_APMIXED_MPLL, 1, 8),
+ PLL_FACTOR(CLK_TOP_M_D8_D2, "m_d8_d2", CLK_APMIXED_MPLL, 1, 16),
+ PLL_FACTOR(CLK_TOP_CB_MM_720M, "cb_mm_720m", CLK_APMIXED_MMPLL, 1, 1),
+ PLL_FACTOR(CLK_TOP_CB_MM_D2, "cb_mm_d2", CLK_APMIXED_MMPLL, 1, 2),
+ PLL_FACTOR(CLK_TOP_CB_MM_D3, "cb_mm_d3", CLK_APMIXED_MMPLL, 1, 3),
+ PLL_FACTOR(CLK_TOP_CB_MM_D3_D5, "cb_mm_d3_d5", CLK_APMIXED_MMPLL, 1, 15),
+ PLL_FACTOR(CLK_TOP_CB_MM_D4, "cb_mm_d4", CLK_APMIXED_MMPLL, 1, 4),
+ PLL_FACTOR(CLK_TOP_CB_MM_D6, "cb_mm_d6", CLK_APMIXED_MMPLL, 1, 6),
+ PLL_FACTOR(CLK_TOP_MM_D6_D2, "mm_d6_d2", CLK_APMIXED_MMPLL, 1, 12),
+ PLL_FACTOR(CLK_TOP_CB_MM_D8, "cb_mm_d8", CLK_APMIXED_MMPLL, 1, 8),
+ PLL_FACTOR(CLK_TOP_CB_APLL2_196M, "cb_apll2_196m", CLK_APMIXED_APLL2, 1,
1),
- PLL_FACTOR(CK_TOP_APLL2_D2, "apll2_d2", CK_APMIXED_APLL2, 1, 2),
- PLL_FACTOR(CK_TOP_APLL2_D4, "apll2_d4", CK_APMIXED_APLL2, 1, 4),
- PLL_FACTOR(CK_TOP_NET1_2500M, "net1_2500m", CK_APMIXED_NET1PLL, 1, 1),
- PLL_FACTOR(CK_TOP_CB_NET1_D4, "cb_net1_d4", CK_APMIXED_NET1PLL, 1, 4),
- PLL_FACTOR(CK_TOP_CB_NET1_D5, "cb_net1_d5", CK_APMIXED_NET1PLL, 1, 5),
- PLL_FACTOR(CK_TOP_NET1_D5_D2, "net1_d5_d2", CK_APMIXED_NET1PLL, 1, 10),
- PLL_FACTOR(CK_TOP_NET1_D5_D4, "net1_d5_d4", CK_APMIXED_NET1PLL, 1, 20),
- PLL_FACTOR(CK_TOP_CB_NET1_D8, "cb_net1_d8", CK_APMIXED_NET1PLL, 1, 8),
- PLL_FACTOR(CK_TOP_NET1_D8_D2, "net1_d8_d2", CK_APMIXED_NET1PLL, 1, 16),
- PLL_FACTOR(CK_TOP_NET1_D8_D4, "net1_d8_d4", CK_APMIXED_NET1PLL, 1, 32),
- PLL_FACTOR(CK_TOP_CB_NET2_800M, "cb_net2_800m", CK_APMIXED_NET2PLL, 1,
+ PLL_FACTOR(CLK_TOP_APLL2_D2, "apll2_d2", CLK_APMIXED_APLL2, 1, 2),
+ PLL_FACTOR(CLK_TOP_APLL2_D4, "apll2_d4", CLK_APMIXED_APLL2, 1, 4),
+ PLL_FACTOR(CLK_TOP_NET1_2500M, "net1_2500m", CLK_APMIXED_NET1PLL, 1, 1),
+ PLL_FACTOR(CLK_TOP_CB_NET1_D4, "cb_net1_d4", CLK_APMIXED_NET1PLL, 1, 4),
+ PLL_FACTOR(CLK_TOP_CB_NET1_D5, "cb_net1_d5", CLK_APMIXED_NET1PLL, 1, 5),
+ PLL_FACTOR(CLK_TOP_NET1_D5_D2, "net1_d5_d2", CLK_APMIXED_NET1PLL, 1, 10),
+ PLL_FACTOR(CLK_TOP_NET1_D5_D4, "net1_d5_d4", CLK_APMIXED_NET1PLL, 1, 20),
+ PLL_FACTOR(CLK_TOP_CB_NET1_D8, "cb_net1_d8", CLK_APMIXED_NET1PLL, 1, 8),
+ PLL_FACTOR(CLK_TOP_NET1_D8_D2, "net1_d8_d2", CLK_APMIXED_NET1PLL, 1, 16),
+ PLL_FACTOR(CLK_TOP_NET1_D8_D4, "net1_d8_d4", CLK_APMIXED_NET1PLL, 1, 32),
+ PLL_FACTOR(CLK_TOP_CB_NET2_800M, "cb_net2_800m", CLK_APMIXED_NET2PLL, 1,
1),
- PLL_FACTOR(CK_TOP_CB_NET2_D2, "cb_net2_d2", CK_APMIXED_NET2PLL, 1, 2),
- PLL_FACTOR(CK_TOP_CB_NET2_D4, "cb_net2_d4", CK_APMIXED_NET2PLL, 1, 4),
- PLL_FACTOR(CK_TOP_NET2_D4_D2, "net2_d4_d2", CK_APMIXED_NET2PLL, 1, 8),
- PLL_FACTOR(CK_TOP_NET2_D4_D4, "net2_d4_d4", CK_APMIXED_NET2PLL, 1, 16),
- PLL_FACTOR(CK_TOP_CB_NET2_D6, "cb_net2_d6", CK_APMIXED_NET2PLL, 1, 6),
- PLL_FACTOR(CK_TOP_CB_WEDMCU_208M, "cb_wedmcu_208m",
- CK_APMIXED_WEDMCUPLL, 1, 1),
- PLL_FACTOR(CK_TOP_CB_SGM_325M, "cb_sgm_325m", CK_APMIXED_SGMPLL, 1, 1),
- TOP_FACTOR(CK_TOP_CKSQ_40M_D2, "cksq_40m_d2", CK_TOP_CB_CKSQ_40M, 1, 2),
- TOP_FACTOR(CK_TOP_CB_RTC_32K, "cb_rtc_32k", CK_TOP_CB_CKSQ_40M, 1,
+ PLL_FACTOR(CLK_TOP_CB_NET2_D2, "cb_net2_d2", CLK_APMIXED_NET2PLL, 1, 2),
+ PLL_FACTOR(CLK_TOP_CB_NET2_D4, "cb_net2_d4", CLK_APMIXED_NET2PLL, 1, 4),
+ PLL_FACTOR(CLK_TOP_NET2_D4_D2, "net2_d4_d2", CLK_APMIXED_NET2PLL, 1, 8),
+ PLL_FACTOR(CLK_TOP_NET2_D4_D4, "net2_d4_d4", CLK_APMIXED_NET2PLL, 1, 16),
+ PLL_FACTOR(CLK_TOP_CB_NET2_D6, "cb_net2_d6", CLK_APMIXED_NET2PLL, 1, 6),
+ PLL_FACTOR(CLK_TOP_CB_WEDMCU_208M, "cb_wedmcu_208m",
+ CLK_APMIXED_WEDMCUPLL, 1, 1),
+ PLL_FACTOR(CLK_TOP_CB_SGM_325M, "cb_sgm_325m", CLK_APMIXED_SGMPLL, 1, 1),
+ TOP_FACTOR(CLK_TOP_CKSQ_40M_D2, "cksq_40m_d2", CLK_TOP_CB_CKSQ_40M, 1, 2),
+ TOP_FACTOR(CLK_TOP_CB_RTC_32K, "cb_rtc_32k", CLK_TOP_CB_CKSQ_40M, 1,
1250),
- TOP_FACTOR(CK_TOP_CB_RTC_32P7K, "cb_rtc_32p7k", CK_TOP_CB_CKSQ_40M, 1,
+ TOP_FACTOR(CLK_TOP_CB_RTC_32P7K, "cb_rtc_32p7k", CLK_TOP_CB_CKSQ_40M, 1,
1220),
- TOP_FACTOR(CK_TOP_USB_TX250M, "usb_tx250m", CK_TOP_CB_CKSQ_40M, 1, 1),
- TOP_FACTOR(CK_TOP_FAUD, "faud", CK_TOP_CB_CKSQ_40M, 1, 1),
- TOP_FACTOR(CK_TOP_NFI1X, "nfi1x", CK_TOP_NFI1X_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_USB_EQ_RX250M, "usb_eq_rx250m", CK_TOP_CB_CKSQ_40M, 1,
+ TOP_FACTOR(CLK_TOP_USB_TX250M, "usb_tx250m", CLK_TOP_CB_CKSQ_40M, 1, 1),
+ TOP_FACTOR(CLK_TOP_FAUD, "faud", CLK_TOP_AUD_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_NFI1X, "nfi1x", CLK_TOP_NFI1X_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_USB_EQ_RX250M, "usb_eq_rx250m", CLK_TOP_CB_CKSQ_40M, 1,
1),
- TOP_FACTOR(CK_TOP_USB_CDR_CK, "usb_cdr", CK_TOP_CB_CKSQ_40M, 1, 1),
- TOP_FACTOR(CK_TOP_USB_LN0_CK, "usb_ln0", CK_TOP_CB_CKSQ_40M, 1, 1),
- TOP_FACTOR(CK_TOP_SPINFI_BCK, "spinfi_bck", CK_TOP_SPINFI_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_SPI, "spi", CK_TOP_SPI_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_SPIM_MST, "spim_mst", CK_TOP_SPIM_MST_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_UART_BCK, "uart_bck", CK_TOP_UART_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_PWM_BCK, "pwm_bck", CK_TOP_PWM_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_I2C_BCK, "i2c_bck", CK_TOP_I2C_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_PEXTP_TL, "pextp_tl", CK_TOP_PEXTP_TL_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_EMMC_208M, "emmc_208m", CK_TOP_EMMC_208M_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_EMMC_400M, "emmc_400m", CK_TOP_EMMC_400M_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_DRAMC_REF, "dramc_ref", CK_TOP_DRAMC_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_DRAMC_MD32, "dramc_md32", CK_TOP_DRAMC_MD32_SEL, 1,
+ TOP_FACTOR(CLK_TOP_USB_CDR_CK, "usb_cdr", CLK_TOP_CB_CKSQ_40M, 1, 1),
+ TOP_FACTOR(CLK_TOP_USB_LN0_CK, "usb_ln0", CLK_TOP_CB_CKSQ_40M, 1, 1),
+ TOP_FACTOR(CLK_TOP_SPINFI_BCK, "spinfi_bck", CLK_TOP_SPINFI_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_SPI, "spi", CLK_TOP_SPI_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_SPIM_MST, "spim_mst", CLK_TOP_SPIM_MST_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_UART_BCK, "uart_bck", CLK_TOP_UART_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_PWM_BCK, "pwm_bck", CLK_TOP_PWM_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_I2C_BCK, "i2c_bck", CLK_TOP_I2C_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_PEXTP_TL, "pextp_tl", CLK_TOP_PEXTP_TL_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_EMMC_208M, "emmc_208m", CLK_TOP_EMMC_208M_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_EMMC_400M, "emmc_400m", CLK_TOP_EMMC_400M_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_DRAMC_REF, "dramc_ref", CLK_TOP_DRAMC_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_DRAMC_MD32, "dramc_md32", CLK_TOP_DRAMC_MD32_SEL, 1,
1),
- TOP_FACTOR(CK_TOP_SYSAXI, "sysaxi", CK_TOP_SYSAXI_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_SYSAPB, "sysapb", CK_TOP_SYSAPB_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_ARM_DB_MAIN, "arm_db_main", CK_TOP_ARM_DB_MAIN_SEL, 1,
+ TOP_FACTOR(CLK_TOP_SYSAXI, "sysaxi", CLK_TOP_SYSAXI_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_SYSAPB, "sysapb", CLK_TOP_SYSAPB_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_ARM_DB_MAIN, "arm_db_main", CLK_TOP_ARM_DB_MAIN_SEL, 1,
1),
- TOP_FACTOR(CK_TOP_AP2CNN_HOST, "ap2cnn_host", CK_TOP_AP2CNN_HOST_SEL, 1,
+ TOP_FACTOR(CLK_TOP_AP2CNN_HOST, "ap2cnn_host", CLK_TOP_AP2CNN_HOST_SEL, 1,
1),
- TOP_FACTOR(CK_TOP_NETSYS, "netsys", CK_TOP_NETSYS_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_NETSYS_500M, "netsys_500m", CK_TOP_NETSYS_500M_SEL, 1,
+ TOP_FACTOR(CLK_TOP_NETSYS, "netsys", CLK_TOP_NETSYS_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_NETSYS_500M, "netsys_500m", CLK_TOP_NETSYS_500M_SEL, 1,
1),
- TOP_FACTOR(CK_TOP_NETSYS_WED_MCU, "netsys_wed_mcu",
- CK_TOP_NETSYS_MCU_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_NETSYS_2X, "netsys_2x", CK_TOP_NETSYS_2X_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_SGM_325M, "sgm_325m", CK_TOP_SGM_325M_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_SGM_REG, "sgm_reg", CK_TOP_SGM_REG_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_F26M, "csw_f26m", CK_TOP_F26M_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_EIP97B, "eip97b", CK_TOP_EIP97B_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_USB3_PHY, "usb3_phy", CK_TOP_USB3_PHY_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_AUD, "aud", CK_TOP_FAUD, 1, 1),
- TOP_FACTOR(CK_TOP_A1SYS, "a1sys", CK_TOP_A1SYS_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_AUD_L, "aud_l", CK_TOP_AUD_L_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_A_TUNER, "a_tuner", CK_TOP_A_TUNER_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_U2U3_REF, "u2u3_ref", CK_TOP_U2U3_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_U2U3_SYS, "u2u3_sys", CK_TOP_U2U3_SYS_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_U2U3_XHCI, "u2u3_xhci", CK_TOP_U2U3_XHCI_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_USB_FRMCNT, "usb_frmcnt", CK_TOP_USB_FRMCNT_SEL, 1,
+ TOP_FACTOR(CLK_TOP_NETSYS_WED_MCU, "netsys_wed_mcu",
+ CLK_TOP_NETSYS_MCU_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_NETSYS_2X, "netsys_2x", CLK_TOP_NETSYS_2X_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_SGM_325M, "sgm_325m", CLK_TOP_SGM_325M_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_SGM_REG, "sgm_reg", CLK_TOP_SGM_REG_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_F26M, "csw_f26m", CLK_TOP_F26M_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_EIP97B, "eip97b", CLK_TOP_EIP97B_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_USB3_PHY, "usb3_phy", CLK_TOP_USB3_PHY_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_AUD, "aud", CLK_TOP_FAUD, 1, 1),
+ TOP_FACTOR(CLK_TOP_A1SYS, "a1sys", CLK_TOP_A1SYS_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_AUD_L, "aud_l", CLK_TOP_AUD_L_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_A_TUNER, "a_tuner", CLK_TOP_A_TUNER_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_U2U3_REF, "u2u3_ref", CLK_TOP_U2U3_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_U2U3_SYS, "u2u3_sys", CLK_TOP_U2U3_SYS_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_U2U3_XHCI, "u2u3_xhci", CLK_TOP_U2U3_XHCI_SEL, 1, 1),
+ TOP_FACTOR(CLK_TOP_USB_FRMCNT, "usb_frmcnt", CLK_TOP_USB_FRMCNT_SEL, 1,
1),
};
/* TOPCKGEN MUX PARENTS */
-static const int nfi1x_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_MM_D4,
- CK_TOP_NET1_D8_D2, CK_TOP_CB_NET2_D6,
- CK_TOP_CB_M_D4, CK_TOP_CB_MM_D8,
- CK_TOP_NET1_D8_D4, CK_TOP_CB_M_D8 };
+static const int nfi1x_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_CB_MM_D4,
+ CLK_TOP_NET1_D8_D2, CLK_TOP_CB_NET2_D6,
+ CLK_TOP_CB_M_D4, CLK_TOP_CB_MM_D8,
+ CLK_TOP_NET1_D8_D4, CLK_TOP_CB_M_D8 };
-static const int spinfi_parents[] = { CK_TOP_CKSQ_40M_D2, CK_TOP_CB_CKSQ_40M,
- CK_TOP_NET1_D5_D4, CK_TOP_CB_M_D4,
- CK_TOP_CB_MM_D8, CK_TOP_NET1_D8_D4,
- CK_TOP_MM_D6_D2, CK_TOP_CB_M_D8 };
+static const int spinfi_parents[] = { CLK_TOP_CKSQ_40M_D2, CLK_TOP_CB_CKSQ_40M,
+ CLK_TOP_NET1_D5_D4, CLK_TOP_CB_M_D4,
+ CLK_TOP_CB_MM_D8, CLK_TOP_NET1_D8_D4,
+ CLK_TOP_MM_D6_D2, CLK_TOP_CB_M_D8 };
-static const int spi_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_M_D2,
- CK_TOP_CB_MM_D4, CK_TOP_NET1_D8_D2,
- CK_TOP_CB_NET2_D6, CK_TOP_NET1_D5_D4,
- CK_TOP_CB_M_D4, CK_TOP_NET1_D8_D4 };
+static const int spi_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_CB_M_D2,
+ CLK_TOP_CB_MM_D4, CLK_TOP_NET1_D8_D2,
+ CLK_TOP_CB_NET2_D6, CLK_TOP_NET1_D5_D4,
+ CLK_TOP_CB_M_D4, CLK_TOP_NET1_D8_D4 };
-static const int uart_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_M_D8,
- CK_TOP_M_D8_D2 };
+static const int uart_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_CB_M_D8,
+ CLK_TOP_M_D8_D2 };
-static const int pwm_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D8_D2,
- CK_TOP_NET1_D5_D4, CK_TOP_CB_M_D4,
- CK_TOP_M_D8_D2, CK_TOP_CB_RTC_32K };
+static const int pwm_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_NET1_D8_D2,
+ CLK_TOP_NET1_D5_D4, CLK_TOP_CB_M_D4,
+ CLK_TOP_M_D8_D2, CLK_TOP_CB_RTC_32K };
-static const int i2c_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D5_D4,
- CK_TOP_CB_M_D4, CK_TOP_NET1_D8_D4 };
+static const int i2c_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_NET1_D5_D4,
+ CLK_TOP_CB_M_D4, CLK_TOP_NET1_D8_D4 };
-static const int pextp_tl_ck_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_NET1_D5_D4, CK_TOP_CB_M_D4,
- CK_TOP_CB_RTC_32K };
+static const int pextp_tl_ck_parents[] = { CLK_TOP_CB_CKSQ_40M,
+ CLK_TOP_NET1_D5_D4, CLK_TOP_CB_M_D4,
+ CLK_TOP_CB_RTC_32K };
static const int emmc_208m_parents[] = {
- CK_TOP_CB_CKSQ_40M, CK_TOP_CB_M_D2, CK_TOP_CB_NET2_D4,
- CK_TOP_CB_APLL2_196M, CK_TOP_CB_MM_D4, CK_TOP_NET1_D8_D2,
- CK_TOP_CB_MM_D6
+ CLK_TOP_CB_CKSQ_40M, CLK_TOP_CB_M_D2, CLK_TOP_CB_NET2_D4,
+ CLK_TOP_CB_APLL2_196M, CLK_TOP_CB_MM_D4, CLK_TOP_NET1_D8_D2,
+ CLK_TOP_CB_MM_D6
};
-static const int emmc_400m_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_NET2_D2,
- CK_TOP_CB_MM_D2, CK_TOP_CB_NET2_D2 };
+static const int emmc_400m_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_CB_NET2_D2,
+ CLK_TOP_CB_MM_D2, CLK_TOP_CB_NET2_D2 };
-static const int csw_f26m_parents[] = { CK_TOP_CKSQ_40M_D2, CK_TOP_M_D8_D2 };
+static const int csw_f26m_parents[] = { CLK_TOP_CKSQ_40M_D2, CLK_TOP_M_D8_D2 };
-static const int dramc_md32_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_M_D2,
- CK_TOP_CB_WEDMCU_208M };
+static const int dramc_md32_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_CB_M_D2,
+ CLK_TOP_CB_WEDMCU_208M };
-static const int sysaxi_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D8_D2 };
+static const int sysaxi_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_NET1_D8_D2 };
-static const int sysapb_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_M_D3_D2 };
+static const int sysapb_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_M_D3_D2 };
-static const int arm_db_main_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET2_D6 };
+static const int arm_db_main_parents[] = { CLK_TOP_CB_CKSQ_40M,
+ CLK_TOP_CB_NET2_D6 };
-static const int ap2cnn_host_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_NET1_D8_D4 };
+static const int ap2cnn_host_parents[] = { CLK_TOP_CB_CKSQ_40M,
+ CLK_TOP_NET1_D8_D4 };
-static const int netsys_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_MM_D2 };
+static const int netsys_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_CB_MM_D2 };
-static const int netsys_500m_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET1_D5 };
+static const int netsys_500m_parents[] = { CLK_TOP_CB_CKSQ_40M,
+ CLK_TOP_CB_NET1_D5 };
-static const int netsys_mcu_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_MM_720M,
- CK_TOP_CB_NET1_D4, CK_TOP_CB_NET1_D5,
- CK_TOP_CB_M_416M };
+static const int netsys_mcu_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_CB_MM_720M,
+ CLK_TOP_CB_NET1_D4, CLK_TOP_CB_NET1_D5,
+ CLK_TOP_CB_M_416M };
-static const int netsys_2x_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET2_800M,
- CK_TOP_CB_MM_720M };
+static const int netsys_2x_parents[] = { CLK_TOP_CB_CKSQ_40M,
+ CLK_TOP_CB_NET2_800M,
+ CLK_TOP_CB_MM_720M };
-static const int sgm_325m_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_SGM_325M };
+static const int sgm_325m_parents[] = { CLK_TOP_CB_CKSQ_40M,
+ CLK_TOP_CB_SGM_325M };
-static const int sgm_reg_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_NET2_D4 };
+static const int sgm_reg_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_CB_NET2_D4 };
-static const int eip97b_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_NET1_D5,
- CK_TOP_CB_M_416M, CK_TOP_CB_MM_D2,
- CK_TOP_NET1_D5_D2 };
+static const int eip97b_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_CB_NET1_D5,
+ CLK_TOP_CB_M_416M, CLK_TOP_CB_MM_D2,
+ CLK_TOP_NET1_D5_D2 };
-static const int aud_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_APLL2_196M };
+static const int aud_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_CB_APLL2_196M };
-static const int a1sys_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_APLL2_D4 };
+static const int a1sys_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_APLL2_D4 };
-static const int aud_l_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_APLL2_196M,
- CK_TOP_M_D8_D2 };
+static const int aud_l_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_CB_APLL2_196M,
+ CLK_TOP_M_D8_D2 };
-static const int a_tuner_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_APLL2_D4,
- CK_TOP_M_D8_D2 };
+static const int a_tuner_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_APLL2_D4,
+ CLK_TOP_M_D8_D2 };
-static const int u2u3_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_M_D8_D2 };
+static const int u2u3_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_M_D8_D2 };
-static const int u2u3_sys_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D5_D4 };
+static const int u2u3_sys_parents[] = { CLK_TOP_CB_CKSQ_40M, CLK_TOP_NET1_D5_D4 };
-static const int usb_frmcnt_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_MM_D3_D5 };
+static const int usb_frmcnt_parents[] = { CLK_TOP_CB_CKSQ_40M,
+ CLK_TOP_CB_MM_D3_D5 };
#define TOP_MUX(_id, _name, _parents, _mux_ofs, _mux_set_ofs, _mux_clr_ofs, \
_shift, _width, _gate, _upd_ofs, _upd) \
@@ -242,174 +242,150 @@
/* TOPCKGEN MUX_GATE */
static const struct mtk_composite top_muxes[] = {
- TOP_MUX(CK_TOP_NFI1X_SEL, "nfi1x_sel", nfi1x_parents, 0x0, 0x4, 0x8, 0,
+ TOP_MUX(CLK_TOP_NFI1X_SEL, "nfi1x_sel", nfi1x_parents, 0x0, 0x4, 0x8, 0,
3, 7, 0x1c0, 0),
- TOP_MUX(CK_TOP_SPINFI_SEL, "spinfi_sel", spinfi_parents, 0x0, 0x4, 0x8,
+ TOP_MUX(CLK_TOP_SPINFI_SEL, "spinfi_sel", spinfi_parents, 0x0, 0x4, 0x8,
8, 3, 15, 0x1c0, 1),
- TOP_MUX(CK_TOP_SPI_SEL, "spi_sel", spi_parents, 0x0, 0x4, 0x8, 16, 3,
+ TOP_MUX(CLK_TOP_SPI_SEL, "spi_sel", spi_parents, 0x0, 0x4, 0x8, 16, 3,
23, 0x1c0, 2),
- TOP_MUX(CK_TOP_SPIM_MST_SEL, "spim_mst_sel", spi_parents, 0x0, 0x4, 0x8,
+ TOP_MUX(CLK_TOP_SPIM_MST_SEL, "spim_mst_sel", spi_parents, 0x0, 0x4, 0x8,
24, 3, 31, 0x1c0, 3),
- TOP_MUX(CK_TOP_UART_SEL, "uart_sel", uart_parents, 0x10, 0x14, 0x18, 0,
+ TOP_MUX(CLK_TOP_UART_SEL, "uart_sel", uart_parents, 0x10, 0x14, 0x18, 0,
2, 7, 0x1c0, 4),
- TOP_MUX(CK_TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x10, 0x14, 0x18, 8, 3,
+ TOP_MUX(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x10, 0x14, 0x18, 8, 3,
15, 0x1c0, 5),
- TOP_MUX(CK_TOP_I2C_SEL, "i2c_sel", i2c_parents, 0x10, 0x14, 0x18, 16, 2,
+ TOP_MUX(CLK_TOP_I2C_SEL, "i2c_sel", i2c_parents, 0x10, 0x14, 0x18, 16, 2,
23, 0x1c0, 6),
- TOP_MUX(CK_TOP_PEXTP_TL_SEL, "pextp_tl_ck_sel", pextp_tl_ck_parents,
+ TOP_MUX(CLK_TOP_PEXTP_TL_SEL, "pextp_tl_ck_sel", pextp_tl_ck_parents,
0x10, 0x14, 0x18, 24, 2, 31, 0x1c0, 7),
- TOP_MUX(CK_TOP_EMMC_208M_SEL, "emmc_208m_sel", emmc_208m_parents, 0x20,
+ TOP_MUX(CLK_TOP_EMMC_208M_SEL, "emmc_208m_sel", emmc_208m_parents, 0x20,
0x24, 0x28, 0, 3, 7, 0x1c0, 8),
- TOP_MUX(CK_TOP_EMMC_400M_SEL, "emmc_400m_sel", emmc_400m_parents, 0x20,
+ TOP_MUX(CLK_TOP_EMMC_400M_SEL, "emmc_400m_sel", emmc_400m_parents, 0x20,
0x24, 0x28, 8, 2, 15, 0x1c0, 9),
- TOP_MUX(CK_TOP_F26M_SEL, "csw_f26m_sel", csw_f26m_parents, 0x20, 0x24,
+ TOP_MUX(CLK_TOP_F26M_SEL, "csw_f26m_sel", csw_f26m_parents, 0x20, 0x24,
0x28, 16, 1, 23, 0x1c0, 10),
- TOP_MUX(CK_TOP_DRAMC_SEL, "dramc_sel", csw_f26m_parents, 0x20, 0x24,
+ TOP_MUX(CLK_TOP_DRAMC_SEL, "dramc_sel", csw_f26m_parents, 0x20, 0x24,
0x28, 24, 1, 31, 0x1c0, 11),
- TOP_MUX(CK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel", dramc_md32_parents,
+ TOP_MUX(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel", dramc_md32_parents,
0x30, 0x34, 0x38, 0, 2, 7, 0x1c0, 12),
- TOP_MUX(CK_TOP_SYSAXI_SEL, "sysaxi_sel", sysaxi_parents, 0x30, 0x34,
+ TOP_MUX(CLK_TOP_SYSAXI_SEL, "sysaxi_sel", sysaxi_parents, 0x30, 0x34,
0x38, 8, 1, 15, 0x1c0, 13),
- TOP_MUX(CK_TOP_SYSAPB_SEL, "sysapb_sel", sysapb_parents, 0x30, 0x34,
+ TOP_MUX(CLK_TOP_SYSAPB_SEL, "sysapb_sel", sysapb_parents, 0x30, 0x34,
0x38, 16, 1, 23, 0x1c0, 14),
- TOP_MUX(CK_TOP_ARM_DB_MAIN_SEL, "arm_db_main_sel", arm_db_main_parents,
+ TOP_MUX(CLK_TOP_ARM_DB_MAIN_SEL, "arm_db_main_sel", arm_db_main_parents,
0x30, 0x34, 0x38, 24, 1, 31, 0x1c0, 15),
- TOP_MUX(CK_TOP_AP2CNN_HOST_SEL, "ap2cnn_host_sel", ap2cnn_host_parents,
+ TOP_MUX(CLK_TOP_AP2CNN_HOST_SEL, "ap2cnn_host_sel", ap2cnn_host_parents,
0x40, 0x44, 0x48, 0, 1, 7, 0x1c0, 16),
- TOP_MUX(CK_TOP_NETSYS_SEL, "netsys_sel", netsys_parents, 0x40, 0x44,
+ TOP_MUX(CLK_TOP_NETSYS_SEL, "netsys_sel", netsys_parents, 0x40, 0x44,
0x48, 8, 1, 15, 0x1c0, 17),
- TOP_MUX(CK_TOP_NETSYS_500M_SEL, "netsys_500m_sel", netsys_500m_parents,
+ TOP_MUX(CLK_TOP_NETSYS_500M_SEL, "netsys_500m_sel", netsys_500m_parents,
0x40, 0x44, 0x48, 16, 1, 23, 0x1c0, 18),
- TOP_MUX(CK_TOP_NETSYS_MCU_SEL, "netsys_mcu_sel", netsys_mcu_parents,
+ TOP_MUX(CLK_TOP_NETSYS_MCU_SEL, "netsys_mcu_sel", netsys_mcu_parents,
0x40, 0x44, 0x48, 24, 3, 31, 0x1c0, 19),
- TOP_MUX(CK_TOP_NETSYS_2X_SEL, "netsys_2x_sel", netsys_2x_parents, 0x50,
+ TOP_MUX(CLK_TOP_NETSYS_2X_SEL, "netsys_2x_sel", netsys_2x_parents, 0x50,
0x54, 0x58, 0, 2, 7, 0x1c0, 20),
- TOP_MUX(CK_TOP_SGM_325M_SEL, "sgm_325m_sel", sgm_325m_parents, 0x50,
+ TOP_MUX(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel", sgm_325m_parents, 0x50,
0x54, 0x58, 8, 1, 15, 0x1c0, 21),
- TOP_MUX(CK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents, 0x50, 0x54,
+ TOP_MUX(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents, 0x50, 0x54,
0x58, 16, 1, 23, 0x1c0, 22),
- TOP_MUX(CK_TOP_EIP97B_SEL, "eip97b_sel", eip97b_parents, 0x50, 0x54,
+ TOP_MUX(CLK_TOP_EIP97B_SEL, "eip97b_sel", eip97b_parents, 0x50, 0x54,
0x58, 24, 3, 31, 0x1c0, 23),
- TOP_MUX(CK_TOP_USB3_PHY_SEL, "usb3_phy_sel", csw_f26m_parents, 0x60,
+ TOP_MUX(CLK_TOP_USB3_PHY_SEL, "usb3_phy_sel", csw_f26m_parents, 0x60,
0x64, 0x68, 0, 1, 7, 0x1c0, 24),
- TOP_MUX(CK_TOP_AUD_SEL, "aud_sel", aud_parents, 0x60, 0x64, 0x68, 8, 1,
+ TOP_MUX(CLK_TOP_AUD_SEL, "aud_sel", aud_parents, 0x60, 0x64, 0x68, 8, 1,
15, 0x1c0, 25),
- TOP_MUX(CK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents, 0x60, 0x64, 0x68,
+ TOP_MUX(CLK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents, 0x60, 0x64, 0x68,
16, 1, 23, 0x1c0, 26),
- TOP_MUX(CK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents, 0x60, 0x64, 0x68,
+ TOP_MUX(CLK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents, 0x60, 0x64, 0x68,
24, 2, 31, 0x1c0, 27),
- TOP_MUX(CK_TOP_A_TUNER_SEL, "a_tuner_sel", a_tuner_parents, 0x70, 0x74,
+ TOP_MUX(CLK_TOP_A_TUNER_SEL, "a_tuner_sel", a_tuner_parents, 0x70, 0x74,
0x78, 0, 2, 7, 0x1c0, 28),
- TOP_MUX(CK_TOP_U2U3_SEL, "u2u3_sel", u2u3_parents, 0x70, 0x74, 0x78, 8,
+ TOP_MUX(CLK_TOP_U2U3_SEL, "u2u3_sel", u2u3_parents, 0x70, 0x74, 0x78, 8,
1, 15, 0x1c0, 29),
- TOP_MUX(CK_TOP_U2U3_SYS_SEL, "u2u3_sys_sel", u2u3_sys_parents, 0x70,
+ TOP_MUX(CLK_TOP_U2U3_SYS_SEL, "u2u3_sys_sel", u2u3_sys_parents, 0x70,
0x74, 0x78, 16, 1, 23, 0x1c0, 30),
- TOP_MUX(CK_TOP_U2U3_XHCI_SEL, "u2u3_xhci_sel", u2u3_sys_parents, 0x70,
+ TOP_MUX(CLK_TOP_U2U3_XHCI_SEL, "u2u3_xhci_sel", u2u3_sys_parents, 0x70,
0x74, 0x78, 24, 1, 31, 0x1c4, 0),
- TOP_MUX(CK_TOP_USB_FRMCNT_SEL, "usb_frmcnt_sel", usb_frmcnt_parents,
+ TOP_MUX(CLK_TOP_USB_FRMCNT_SEL, "usb_frmcnt_sel", usb_frmcnt_parents,
0x80, 0x84, 0x88, 0, 1, 7, 0x1c4, 1),
};
/* INFRA FIXED DIV */
static const struct mtk_fixed_factor infra_fixed_divs[] = {
- TOP_FACTOR(CK_INFRA_CK_F26M, "infra_ck_f26m", CK_TOP_F26M_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_UART, "infra_uart", CK_TOP_UART_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_ISPI0, "infra_ispi0", CK_TOP_SPI_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_I2C, "infra_i2c", CK_TOP_I2C_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_ISPI1, "infra_ispi1", CK_TOP_SPIM_MST_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_PWM, "infra_pwm", CK_TOP_PWM_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_66M_MCK, "infra_66m_mck", CK_TOP_SYSAXI_SEL, 1, 2),
- TOP_FACTOR(CK_INFRA_CK_F32K, "infra_ck_f32k", CK_TOP_CB_RTC_32P7K, 1,
- 1),
- TOP_FACTOR(CK_INFRA_PCIE_CK, "infra_pcie", CK_TOP_PEXTP_TL_SEL, 1, 1),
- INFRA_FACTOR(CK_INFRA_PWM_BCK, "infra_pwm_bck", CK_INFRA_PWM_BSEL, 1,
- 1),
- INFRA_FACTOR(CK_INFRA_PWM_CK1, "infra_pwm_ck1", CK_INFRA_PWM1_SEL, 1,
- 1),
- INFRA_FACTOR(CK_INFRA_PWM_CK2, "infra_pwm_ck2", CK_INFRA_PWM2_SEL, 1,
- 1),
- TOP_FACTOR(CK_INFRA_133M_HCK, "infra_133m_hck", CK_TOP_SYSAXI, 1, 1),
- INFRA_FACTOR(CK_INFRA_66M_PHCK, "infra_66m_phck", CK_INFRA_133M_HCK, 1,
- 1),
- TOP_FACTOR(CK_INFRA_FAUD_L_CK, "infra_faud_l", CK_TOP_AUD_L, 1, 1),
- TOP_FACTOR(CK_INFRA_FAUD_AUD_CK, "infra_faud_aud", CK_TOP_A1SYS, 1, 1),
- TOP_FACTOR(CK_INFRA_FAUD_EG2_CK, "infra_faud_eg2", CK_TOP_A_TUNER, 1,
- 1),
- TOP_FACTOR(CK_INFRA_I2CS_CK, "infra_i2cs", CK_TOP_I2C_BCK, 1, 1),
- INFRA_FACTOR(CK_INFRA_MUX_UART0, "infra_mux_uart0", CK_INFRA_UART0_SEL,
- 1, 1),
- INFRA_FACTOR(CK_INFRA_MUX_UART1, "infra_mux_uart1", CK_INFRA_UART1_SEL,
- 1, 1),
- INFRA_FACTOR(CK_INFRA_MUX_UART2, "infra_mux_uart2", CK_INFRA_UART2_SEL,
- 1, 1),
- TOP_FACTOR(CK_INFRA_NFI_CK, "infra_nfi", CK_TOP_NFI1X, 1, 1),
- TOP_FACTOR(CK_INFRA_SPINFI_CK, "infra_spinfi", CK_TOP_SPINFI_BCK, 1, 1),
- INFRA_FACTOR(CK_INFRA_MUX_SPI0, "infra_mux_spi0", CK_INFRA_SPI0_SEL, 1,
- 1),
- INFRA_FACTOR(CK_INFRA_MUX_SPI1, "infra_mux_spi1", CK_INFRA_SPI1_SEL, 1,
- 1),
- INFRA_FACTOR(CK_INFRA_MUX_SPI2, "infra_mux_spi2", CK_INFRA_SPI2_SEL, 1,
- 1),
- TOP_FACTOR(CK_INFRA_RTC_32K, "infra_rtc_32k", CK_TOP_CB_RTC_32K, 1, 1),
- TOP_FACTOR(CK_INFRA_FMSDC_CK, "infra_fmsdc", CK_TOP_EMMC_400M, 1, 1),
- TOP_FACTOR(CK_INFRA_FMSDC_HCK_CK, "infra_fmsdc_hck", CK_TOP_EMMC_208M,
- 1, 1),
- TOP_FACTOR(CK_INFRA_PERI_133M, "infra_peri_133m", CK_TOP_SYSAXI, 1, 1),
- TOP_FACTOR(CK_INFRA_133M_PHCK, "infra_133m_phck", CK_TOP_SYSAXI, 1, 1),
- TOP_FACTOR(CK_INFRA_USB_SYS_CK, "infra_usb_sys", CK_TOP_U2U3_SYS, 1, 1),
- TOP_FACTOR(CK_INFRA_USB_CK, "infra_usb", CK_TOP_U2U3_REF, 1, 1),
- TOP_FACTOR(CK_INFRA_USB_XHCI_CK, "infra_usb_xhci", CK_TOP_U2U3_XHCI, 1,
- 1),
- TOP_FACTOR(CK_INFRA_PCIE_GFMUX_TL_O_PRE, "infra_pcie_mux",
- CK_TOP_PEXTP_TL, 1, 1),
- TOP_FACTOR(CK_INFRA_F26M_CK0, "infra_f26m_ck0", CK_TOP_F26M, 1, 1),
- TOP_FACTOR(CK_INFRA_133M_MCK, "infra_133m_mck", CK_TOP_SYSAXI, 1, 1),
+ TOP_FACTOR(CLK_INFRA_66M_MCK, "infra_66m_mck", CLK_TOP_SYSAXI_SEL, 1, 2),
};
/* INFRASYS MUX PARENTS */
-static const int infra_uart0_parents[] = { CK_INFRA_CK_F26M, CK_INFRA_UART };
+#define INFRA_PARENT(_id) PARENT(_id, CLK_PARENT_INFRASYS)
+#define TOP_PARENT(_id) PARENT(_id, CLK_PARENT_TOPCKGEN)
+#define VOID_PARENT PARENT(-1, 0)
-static const int infra_spi0_parents[] = { CK_INFRA_I2C, CK_INFRA_ISPI0 };
+static const struct mtk_parent infra_uart0_parents[] = {
+ TOP_PARENT(CLK_TOP_F26M_SEL),
+ TOP_PARENT(CLK_TOP_UART_SEL)
+};
+
+static const struct mtk_parent infra_spi0_parents[] = {
+ TOP_PARENT(CLK_TOP_I2C_SEL),
+ TOP_PARENT(CLK_TOP_SPI_SEL)
+};
-static const int infra_spi1_parents[] = { CK_INFRA_I2C, CK_INFRA_ISPI1 };
+static const struct mtk_parent infra_spi1_parents[] = {
+ TOP_PARENT(CLK_TOP_I2C_SEL),
+ TOP_PARENT(CLK_TOP_SPIM_MST_SEL)
+};
-static const int infra_pwm1_parents[] = { -1, -1, -1, CK_INFRA_PWM };
+static const struct mtk_parent infra_pwm1_parents[] = {
+ VOID_PARENT,
+ TOP_PARENT(CLK_TOP_PWM_SEL)
+};
-static const int infra_pwm_bsel_parents[] = { -1, -1, -1, CK_INFRA_PWM };
+static const struct mtk_parent infra_pwm_bsel_parents[] = {
+ TOP_PARENT(CLK_TOP_CB_RTC_32P7K),
+ TOP_PARENT(CLK_TOP_F26M_SEL),
+ INFRA_PARENT(CLK_INFRA_66M_MCK),
+ TOP_PARENT(CLK_TOP_PWM_SEL)
+};
-static const int infra_pcie_parents[] = { CK_INFRA_CK_F32K, CK_INFRA_CK_F26M,
- CK_TOP_CB_CKSQ_40M, CK_INFRA_PCIE_CK};
+static const struct mtk_parent infra_pcie_parents[] = {
+ TOP_PARENT(CLK_TOP_CB_RTC_32P7K),
+ TOP_PARENT(CLK_TOP_F26M_SEL),
+ TOP_PARENT(CLK_TOP_CB_CKSQ_40M),
+ TOP_PARENT(CLK_TOP_PEXTP_TL_SEL)
+};
#define INFRA_MUX(_id, _name, _parents, _reg, _shift, _width) \
{ \
.id = _id, .mux_reg = (_reg) + 0x8, \
.mux_set_reg = (_reg) + 0x0, .mux_clr_reg = (_reg) + 0x4, \
.mux_shift = _shift, .mux_mask = BIT(_width) - 1, \
- .parent = _parents, .num_parents = ARRAY_SIZE(_parents), \
- .flags = CLK_MUX_SETCLR_UPD | CLK_PARENT_INFRASYS, \
+ .parent_flags = _parents, .num_parents = ARRAY_SIZE(_parents), \
+ .flags = CLK_MUX_SETCLR_UPD | CLK_PARENT_MIXED, \
}
/* INFRA MUX */
static const struct mtk_composite infra_muxes[] = {
- INFRA_MUX(CK_INFRA_UART0_SEL, "infra_uart0_sel", infra_uart0_parents,
+ INFRA_MUX(CLK_INFRA_UART0_SEL, "infra_uart0_sel", infra_uart0_parents,
0x10, 0, 1),
- INFRA_MUX(CK_INFRA_UART1_SEL, "infra_uart1_sel", infra_uart0_parents,
+ INFRA_MUX(CLK_INFRA_UART1_SEL, "infra_uart1_sel", infra_uart0_parents,
0x10, 1, 1),
- INFRA_MUX(CK_INFRA_UART2_SEL, "infra_uart2_sel", infra_uart0_parents,
+ INFRA_MUX(CLK_INFRA_UART2_SEL, "infra_uart2_sel", infra_uart0_parents,
0x10, 2, 1),
- INFRA_MUX(CK_INFRA_SPI0_SEL, "infra_spi0_sel", infra_spi0_parents, 0x10,
+ INFRA_MUX(CLK_INFRA_SPI0_SEL, "infra_spi0_sel", infra_spi0_parents, 0x10,
4, 1),
- INFRA_MUX(CK_INFRA_SPI1_SEL, "infra_spi1_sel", infra_spi1_parents, 0x10,
+ INFRA_MUX(CLK_INFRA_SPI1_SEL, "infra_spi1_sel", infra_spi1_parents, 0x10,
5, 1),
- INFRA_MUX(CK_INFRA_SPI2_SEL, "infra_spi2_sel", infra_spi0_parents, 0x10,
+ INFRA_MUX(CLK_INFRA_SPI2_SEL, "infra_spi2_sel", infra_spi0_parents, 0x10,
6, 1),
- INFRA_MUX(CK_INFRA_PWM1_SEL, "infra_pwm1_sel", infra_pwm1_parents, 0x10,
- 9, 2),
- INFRA_MUX(CK_INFRA_PWM2_SEL, "infra_pwm2_sel", infra_pwm1_parents, 0x10,
- 11, 2),
- INFRA_MUX(CK_INFRA_PWM_BSEL, "infra_pwm_bsel", infra_pwm_bsel_parents,
+ INFRA_MUX(CLK_INFRA_PWM1_SEL, "infra_pwm1_sel", infra_pwm1_parents, 0x10,
+ 9, 1),
+ INFRA_MUX(CLK_INFRA_PWM2_SEL, "infra_pwm2_sel", infra_pwm1_parents, 0x10,
+ 11, 1),
+ INFRA_MUX(CLK_INFRA_PWM3_SEL, "infra_pwm3_sel", infra_pwm1_parents, 0x10,
+ 15, 1),
+ INFRA_MUX(CLK_INFRA_PWM_BSEL, "infra_pwm_bsel", infra_pwm_bsel_parents,
0x10, 13, 2),
- INFRA_MUX(CK_INFRA_PCIE_SEL, "infra_pcie_sel", infra_pcie_parents, 0x20,
+ INFRA_MUX(CLK_INFRA_PCIE_SEL, "infra_pcie_sel", infra_pcie_parents, 0x20,
0, 2),
};
@@ -431,92 +407,105 @@
.sta_ofs = 0x68,
};
-#define GATE_INFRA0(_id, _name, _parent, _shift) \
+#define GATE_INFRA0(_id, _name, _parent, _shift, _flags) \
{ \
.id = _id, .parent = _parent, .regs = &infra_0_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_INFRASYS, \
+ .flags = _flags, \
}
+#define GATE_INFRA0_INFRA(_id, _name, _parent, _shift) \
+ GATE_INFRA0(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_INFRASYS)
+#define GATE_INFRA0_TOP(_id, _name, _parent, _shift) \
+ GATE_INFRA0(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
-#define GATE_INFRA1(_id, _name, _parent, _shift) \
+#define GATE_INFRA1(_id, _name, _parent, _shift, _flags) \
{ \
.id = _id, .parent = _parent, .regs = &infra_1_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_INFRASYS, \
+ .flags = _flags, \
}
+#define GATE_INFRA1_INFRA(_id, _name, _parent, _shift) \
+ GATE_INFRA1(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_INFRASYS)
+#define GATE_INFRA1_TOP(_id, _name, _parent, _shift) \
+ GATE_INFRA1(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
-#define GATE_INFRA2(_id, _name, _parent, _shift) \
+#define GATE_INFRA2(_id, _name, _parent, _shift, _flags) \
{ \
.id = _id, .parent = _parent, .regs = &infra_2_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_INFRASYS, \
+ .flags = _flags, \
}
+#define GATE_INFRA2_INFRA(_id, _name, _parent, _shift) \
+ GATE_INFRA2(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_INFRASYS)
+#define GATE_INFRA2_TOP(_id, _name, _parent, _shift) \
+ GATE_INFRA2(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
/* INFRA GATE */
-static const struct mtk_gate infracfg_ao_gates[] = {
- GATE_INFRA0(CK_INFRA_GPT_STA, "infra_gpt_sta", CK_INFRA_66M_MCK, 0),
- GATE_INFRA0(CK_INFRA_PWM_HCK, "infra_pwm_hck", CK_INFRA_66M_MCK, 1),
- GATE_INFRA0(CK_INFRA_PWM_STA, "infra_pwm_sta", CK_INFRA_PWM_BCK, 2),
- GATE_INFRA0(CK_INFRA_PWM1_CK, "infra_pwm1", CK_INFRA_PWM_CK1, 3),
- GATE_INFRA0(CK_INFRA_PWM2_CK, "infra_pwm2", CK_INFRA_PWM_CK2, 4),
- GATE_INFRA0(CK_INFRA_CQ_DMA_CK, "infra_cq_dma", CK_INFRA_133M_HCK, 6),
- GATE_INFRA0(CK_INFRA_AUD_BUS_CK, "infra_aud_bus", CK_INFRA_66M_PHCK, 8),
- GATE_INFRA0(CK_INFRA_AUD_26M_CK, "infra_aud_26m", CK_INFRA_CK_F26M, 9),
- GATE_INFRA0(CK_INFRA_AUD_L_CK, "infra_aud_l", CK_INFRA_FAUD_L_CK, 10),
- GATE_INFRA0(CK_INFRA_AUD_AUD_CK, "infra_aud_aud", CK_INFRA_FAUD_AUD_CK,
- 11),
- GATE_INFRA0(CK_INFRA_AUD_EG2_CK, "infra_aud_eg2", CK_INFRA_FAUD_EG2_CK,
- 13),
- GATE_INFRA0(CK_INFRA_DRAMC_26M_CK, "infra_dramc_26m", CK_INFRA_CK_F26M,
- 14),
- GATE_INFRA0(CK_INFRA_DBG_CK, "infra_dbg", CK_INFRA_66M_MCK, 15),
- GATE_INFRA0(CK_INFRA_AP_DMA_CK, "infra_ap_dma", CK_INFRA_66M_MCK, 16),
- GATE_INFRA0(CK_INFRA_SEJ_CK, "infra_sej", CK_INFRA_66M_MCK, 24),
- GATE_INFRA0(CK_INFRA_SEJ_13M_CK, "infra_sej_13m", CK_INFRA_CK_F26M, 25),
- GATE_INFRA1(CK_INFRA_THERM_CK, "infra_therm", CK_INFRA_CK_F26M, 0),
- GATE_INFRA1(CK_INFRA_I2CO_CK, "infra_i2co", CK_INFRA_I2CS_CK, 1),
- GATE_INFRA1(CK_INFRA_UART0_CK, "infra_uart0", CK_INFRA_MUX_UART0, 2),
- GATE_INFRA1(CK_INFRA_UART1_CK, "infra_uart1", CK_INFRA_MUX_UART1, 3),
- GATE_INFRA1(CK_INFRA_UART2_CK, "infra_uart2", CK_INFRA_MUX_UART2, 4),
- GATE_INFRA1(CK_INFRA_SPI2_CK, "infra_spi2", CK_INFRA_MUX_SPI2, 6),
- GATE_INFRA1(CK_INFRA_SPI2_HCK_CK, "infra_spi2_hck", CK_INFRA_66M_MCK,
- 7),
- GATE_INFRA1(CK_INFRA_NFI1_CK, "infra_nfi1", CK_INFRA_NFI_CK, 8),
- GATE_INFRA1(CK_INFRA_SPINFI1_CK, "infra_spinfi1", CK_INFRA_SPINFI_CK,
+static const struct mtk_gate infracfg_gates[] = {
+ GATE_INFRA0_INFRA(CLK_INFRA_GPT_STA, "infra_gpt_sta", CLK_INFRA_66M_MCK, 0),
+ GATE_INFRA0_INFRA(CLK_INFRA_PWM_HCK, "infra_pwm_hck", CLK_INFRA_66M_MCK, 1),
+ GATE_INFRA0_INFRA(CLK_INFRA_PWM_STA, "infra_pwm_sta", CLK_INFRA_PWM_BSEL, 2),
+ GATE_INFRA0_INFRA(CLK_INFRA_PWM1_CK, "infra_pwm1", CLK_INFRA_PWM1_SEL, 3),
+ GATE_INFRA0_INFRA(CLK_INFRA_PWM2_CK, "infra_pwm2", CLK_INFRA_PWM2_SEL, 4),
+ GATE_INFRA0_INFRA(CLK_INFRA_PWM3_CK, "infra_pwm3", CLK_INFRA_PWM3_SEL, 27),
+ GATE_INFRA0_TOP(CLK_INFRA_CQ_DMA_CK, "infra_cq_dma", CLK_TOP_SYSAXI, 6),
+ GATE_INFRA0_TOP(CLK_INFRA_AUD_BUS_CK, "infra_aud_bus", CLK_TOP_SYSAXI, 8),
+ GATE_INFRA0_TOP(CLK_INFRA_AUD_26M_CK, "infra_aud_26m", CLK_TOP_F26M_SEL, 9),
+ GATE_INFRA0_TOP(CLK_INFRA_AUD_L_CK, "infra_aud_l", CLK_TOP_AUD_L, 10),
+ GATE_INFRA0_TOP(CLK_INFRA_AUD_AUD_CK, "infra_aud_aud", CLK_TOP_A1SYS,
+ 11),
+ GATE_INFRA0_TOP(CLK_INFRA_AUD_EG2_CK, "infra_aud_eg2", CLK_TOP_A_TUNER,
+ 13),
+ GATE_INFRA0_TOP(CLK_INFRA_DRAMC_26M_CK, "infra_dramc_26m", CLK_TOP_F26M_SEL,
+ 14),
+ GATE_INFRA0_INFRA(CLK_INFRA_DBG_CK, "infra_dbg", CLK_INFRA_66M_MCK, 15),
+ GATE_INFRA0_INFRA(CLK_INFRA_AP_DMA_CK, "infra_ap_dma", CLK_INFRA_66M_MCK, 16),
+ GATE_INFRA0_INFRA(CLK_INFRA_SEJ_CK, "infra_sej", CLK_INFRA_66M_MCK, 24),
+ GATE_INFRA0_TOP(CLK_INFRA_SEJ_13M_CK, "infra_sej_13m", CLK_TOP_F26M_SEL, 25),
+ GATE_INFRA1_TOP(CLK_INFRA_THERM_CK, "infra_therm", CLK_TOP_F26M_SEL, 0),
+ GATE_INFRA1_TOP(CLK_INFRA_I2C0_CK, "infra_i2c0", CLK_TOP_I2C_BCK, 1),
+ GATE_INFRA1_INFRA(CLK_INFRA_UART0_CK, "infra_uart0", CLK_INFRA_UART0_SEL, 2),
+ GATE_INFRA1_INFRA(CLK_INFRA_UART1_CK, "infra_uart1", CLK_INFRA_UART1_SEL, 3),
+ GATE_INFRA1_INFRA(CLK_INFRA_UART2_CK, "infra_uart2", CLK_INFRA_UART2_SEL, 4),
+ GATE_INFRA1_INFRA(CLK_INFRA_SPI2_CK, "infra_spi2", CLK_INFRA_SPI2_SEL, 6),
+ GATE_INFRA1_INFRA(CLK_INFRA_SPI2_HCK_CK, "infra_spi2_hck", CLK_INFRA_66M_MCK,
+ 7),
+ GATE_INFRA1_TOP(CLK_INFRA_NFI1_CK, "infra_nfi1", CLK_TOP_NFI1X, 8),
+ GATE_INFRA1_TOP(CLK_INFRA_SPINFI1_CK, "infra_spinfi1", CLK_TOP_SPINFI_BCK,
9),
- GATE_INFRA1(CK_INFRA_NFI_HCK_CK, "infra_nfi_hck", CK_INFRA_66M_MCK, 10),
- GATE_INFRA1(CK_INFRA_SPI0_CK, "infra_spi0", CK_INFRA_MUX_SPI0, 11),
- GATE_INFRA1(CK_INFRA_SPI1_CK, "infra_spi1", CK_INFRA_MUX_SPI1, 12),
- GATE_INFRA1(CK_INFRA_SPI0_HCK_CK, "infra_spi0_hck", CK_INFRA_66M_MCK,
- 13),
- GATE_INFRA1(CK_INFRA_SPI1_HCK_CK, "infra_spi1_hck", CK_INFRA_66M_MCK,
- 14),
- GATE_INFRA1(CK_INFRA_FRTC_CK, "infra_frtc", CK_INFRA_RTC_32K, 15),
- GATE_INFRA1(CK_INFRA_MSDC_CK, "infra_msdc", CK_INFRA_FMSDC_CK, 16),
- GATE_INFRA1(CK_INFRA_MSDC_HCK_CK, "infra_msdc_hck",
- CK_INFRA_FMSDC_HCK_CK, 17),
- GATE_INFRA1(CK_INFRA_MSDC_133M_CK, "infra_msdc_133m",
- CK_INFRA_PERI_133M, 18),
- GATE_INFRA1(CK_INFRA_MSDC_66M_CK, "infra_msdc_66m", CK_INFRA_66M_PHCK,
- 19),
- GATE_INFRA1(CK_INFRA_ADC_26M_CK, "infra_adc_26m", CK_TOP_F26M, 20),
- GATE_INFRA1(CK_INFRA_ADC_FRC_CK, "infra_adc_frc", CK_TOP_F26M, 21),
- GATE_INFRA1(CK_INFRA_FBIST2FPC_CK, "infra_fbist2fpc", CK_INFRA_NFI_CK,
- 23),
- GATE_INFRA1(CK_INFRA_I2C_MCK_CK, "infra_i2c_mck", CK_INFRA_133M_MCK,
- 25),
- GATE_INFRA1(CK_INFRA_I2C_PCK_CK, "infra_i2c_pck", CK_INFRA_66M_MCK, 26),
- GATE_INFRA2(CK_INFRA_IUSB_133_CK, "infra_iusb_133", CK_INFRA_133M_PHCK,
- 0),
- GATE_INFRA2(CK_INFRA_IUSB_66M_CK, "infra_iusb_66m", CK_INFRA_66M_PHCK,
- 1),
- GATE_INFRA2(CK_INFRA_IUSB_SYS_CK, "infra_iusb_sys", CK_INFRA_USB_SYS_CK,
- 2),
- GATE_INFRA2(CK_INFRA_IUSB_CK, "infra_iusb", CK_INFRA_USB_CK, 3),
- GATE_INFRA2(CK_INFRA_IPCIE_CK, "infra_ipcie",
- CK_INFRA_PCIE_GFMUX_TL_O_PRE, 12),
- GATE_INFRA2(CK_INFRA_IPCIER_CK, "infra_ipcier", CK_INFRA_F26M_CK0, 14),
- GATE_INFRA2(CK_INFRA_IPCIEB_CK, "infra_ipcieb", CK_INFRA_133M_PHCK, 15),
+ GATE_INFRA1_INFRA(CLK_INFRA_NFI_HCK_CK, "infra_nfi_hck", CLK_INFRA_66M_MCK, 10),
+ GATE_INFRA1_INFRA(CLK_INFRA_SPI0_CK, "infra_spi0", CLK_INFRA_SPI0_SEL, 11),
+ GATE_INFRA1_INFRA(CLK_INFRA_SPI1_CK, "infra_spi1", CLK_INFRA_SPI1_SEL, 12),
+ GATE_INFRA1_INFRA(CLK_INFRA_SPI0_HCK_CK, "infra_spi0_hck", CLK_INFRA_66M_MCK,
+ 13),
+ GATE_INFRA1_INFRA(CLK_INFRA_SPI1_HCK_CK, "infra_spi1_hck", CLK_INFRA_66M_MCK,
+ 14),
+ GATE_INFRA1_TOP(CLK_INFRA_FRTC_CK, "infra_frtc", CLK_TOP_CB_RTC_32K, 15),
+ GATE_INFRA1_TOP(CLK_INFRA_MSDC_CK, "infra_msdc", CLK_TOP_EMMC_400M, 16),
+ GATE_INFRA1_TOP(CLK_INFRA_MSDC_HCK_CK, "infra_msdc_hck",
+ CLK_TOP_EMMC_208M, 17),
+ GATE_INFRA1_TOP(CLK_INFRA_MSDC_133M_CK, "infra_msdc_133m",
+ CLK_TOP_SYSAXI, 18),
+ GATE_INFRA1_TOP(CLK_INFRA_MSDC_66M_CK, "infra_msdc_66m", CLK_TOP_SYSAXI,
+ 19),
+ GATE_INFRA1_INFRA(CLK_INFRA_ADC_26M_CK, "infra_adc_26m", CLK_INFRA_ADC_FRC_CK, 20),
+ GATE_INFRA1_TOP(CLK_INFRA_ADC_FRC_CK, "infra_adc_frc", CLK_TOP_F26M, 21),
+ GATE_INFRA1_TOP(CLK_INFRA_FBIST2FPC_CK, "infra_fbist2fpc", CLK_TOP_NFI1X,
+ 23),
+ GATE_INFRA1_TOP(CLK_INFRA_I2C_MCK_CK, "infra_i2c_mck", CLK_TOP_SYSAXI,
+ 25),
+ GATE_INFRA1_INFRA(CLK_INFRA_I2C_PCK_CK, "infra_i2c_pck", CLK_INFRA_66M_MCK, 26),
+ GATE_INFRA2_TOP(CLK_INFRA_IUSB_133_CK, "infra_iusb_133", CLK_TOP_SYSAXI,
+ 0),
+ GATE_INFRA2_TOP(CLK_INFRA_IUSB_66M_CK, "infra_iusb_66m", CLK_TOP_SYSAXI,
+ 1),
+ GATE_INFRA2_TOP(CLK_INFRA_IUSB_SYS_CK, "infra_iusb_sys", CLK_TOP_U2U3_SYS,
+ 2),
+ GATE_INFRA2_TOP(CLK_INFRA_IUSB_CK, "infra_iusb", CLK_TOP_U2U3_REF, 3),
+ GATE_INFRA2_TOP(CLK_INFRA_IPCIE_CK, "infra_ipcie", CLK_TOP_PEXTP_TL, 12),
+ GATE_INFRA2_TOP(CLK_INFRA_IPCIE_PIPE_CK, "infra_ipcie_pipe", CLK_TOP_CB_CKSQ_40M, 13),
+ GATE_INFRA2_TOP(CLK_INFRA_IPCIER_CK, "infra_ipcier", CLK_TOP_F26M, 14),
+ GATE_INFRA2_TOP(CLK_INFRA_IPCIEB_CK, "infra_ipcieb", CLK_TOP_SYSAXI, 15),
};
static const struct mtk_clk_tree mt7981_fixed_pll_clk_tree = {
@@ -526,19 +515,22 @@
};
static const struct mtk_clk_tree mt7981_topckgen_clk_tree = {
- .fdivs_offs = CK_TOP_CB_M_416M,
- .muxes_offs = CK_TOP_NFI1X_SEL,
+ .fdivs_offs = CLK_TOP_CB_M_416M,
+ .muxes_offs = CLK_TOP_NFI1X_SEL,
.fclks = top_fixed_clks,
.fdivs = top_fixed_divs,
.muxes = top_muxes,
- .flags = CLK_BYPASS_XTAL,
+ .flags = CLK_BYPASS_XTAL | CLK_TOPCKGEN,
};
static const struct mtk_clk_tree mt7981_infracfg_clk_tree = {
- .fdivs_offs = CK_INFRA_CK_F26M,
- .muxes_offs = CK_INFRA_UART0_SEL,
+ .fdivs_offs = CLK_INFRA_66M_MCK,
+ .muxes_offs = CLK_INFRA_UART0_SEL,
+ .gates_offs = CLK_INFRA_GPT_STA,
.fdivs = infra_fixed_divs,
.muxes = infra_muxes,
+ .gates = infracfg_gates,
+ .flags = CLK_INFRASYS,
};
static const struct udevice_id mt7981_fixed_pll_compat[] = {
@@ -592,20 +584,9 @@
{}
};
-static const struct udevice_id mt7981_infracfg_ao_compat[] = {
- { .compatible = "mediatek,mt7981-infracfg_ao" },
- {}
-};
-
static int mt7981_infracfg_probe(struct udevice *dev)
{
- return mtk_common_clk_init(dev, &mt7981_infracfg_clk_tree);
-}
-
-static int mt7981_infracfg_ao_probe(struct udevice *dev)
-{
- return mtk_common_clk_gate_init(dev, &mt7981_infracfg_clk_tree,
- infracfg_ao_gates);
+ return mtk_common_clk_infrasys_init(dev, &mt7981_infracfg_clk_tree);
}
U_BOOT_DRIVER(mtk_clk_infracfg) = {
@@ -618,16 +599,74 @@
.flags = DM_FLAG_PRE_RELOC,
};
+/* sgmiisys */
+static const struct mtk_gate_regs sgmii_cg_regs = {
+ .set_ofs = 0xe4,
+ .clr_ofs = 0xe4,
+ .sta_ofs = 0xe4,
+};
+
-U_BOOT_DRIVER(mtk_clk_infracfg_ao) = {
- .name = "mt7981-clock-infracfg-ao",
+#define GATE_SGMII(_id, _name, _parent, _shift) \
+ { \
+ .id = _id, .parent = _parent, .regs = &sgmii_cg_regs, \
+ .shift = _shift, \
+ .flags = CLK_GATE_NO_SETCLR_INV | CLK_PARENT_TOPCKGEN, \
+ }
+
+static const struct mtk_gate sgmii0_cgs[] = {
+ GATE_SGMII(CLK_SGM0_TX_EN, "sgm0_tx_en", CLK_TOP_USB_TX250M, 2),
+ GATE_SGMII(CLK_SGM0_RX_EN, "sgm0_rx_en", CLK_TOP_USB_EQ_RX250M, 3),
+ GATE_SGMII(CLK_SGM0_CK0_EN, "sgm0_ck0_en", CLK_TOP_USB_LN0_CK, 4),
+ GATE_SGMII(CLK_SGM0_CDR_CK0_EN, "sgm0_cdr_ck0_en", CLK_TOP_USB_CDR_CK, 5),
+};
+
+static int mt7981_sgmii0sys_probe(struct udevice *dev)
+{
+ return mtk_common_clk_gate_init(dev, &mt7981_topckgen_clk_tree,
+ sgmii0_cgs);
+}
+
+static const struct udevice_id mt7981_sgmii0sys_compat[] = {
+ { .compatible = "mediatek,mt7981-sgmiisys_0", },
+ {}
+};
+
+U_BOOT_DRIVER(mtk_clk_sgmii0sys) = {
+ .name = "mt7981-clock-sgmii0sys",
.id = UCLASS_CLK,
- .of_match = mt7981_infracfg_ao_compat,
- .probe = mt7981_infracfg_ao_probe,
+ .of_match = mt7981_sgmii0sys_compat,
+ .probe = mt7981_sgmii0sys_probe,
.priv_auto = sizeof(struct mtk_cg_priv),
.ops = &mtk_clk_gate_ops,
- .flags = DM_FLAG_PRE_RELOC,
+};
+
+static const struct mtk_gate sgmii1_cgs[] = {
+ GATE_SGMII(CLK_SGM1_TX_EN, "sgm1_tx_en", CLK_TOP_USB_TX250M, 2),
+ GATE_SGMII(CLK_SGM1_RX_EN, "sgm1_rx_en", CLK_TOP_USB_EQ_RX250M, 3),
+ GATE_SGMII(CLK_SGM1_CK1_EN, "sgm1_ck1_en", CLK_TOP_USB_LN0_CK, 4),
+ GATE_SGMII(CLK_SGM1_CDR_CK1_EN, "sgm1_cdr_ck1_en", CLK_TOP_USB_CDR_CK, 5),
};
+static int mt7981_sgmii1sys_probe(struct udevice *dev)
+{
+ return mtk_common_clk_gate_init(dev, &mt7981_topckgen_clk_tree,
+ sgmii1_cgs);
+}
+
+static const struct udevice_id mt7981_sgmii1sys_compat[] = {
+ { .compatible = "mediatek,mt7981-sgmiisys_1", },
+ {}
+};
+
+U_BOOT_DRIVER(mtk_clk_sgmii1sys) = {
+ .name = "mt7981-clock-sgmii1sys",
+ .id = UCLASS_CLK,
+ .of_match = mt7981_sgmii1sys_compat,
+ .probe = mt7981_sgmii1sys_probe,
+ .priv_auto = sizeof(struct mtk_cg_priv),
+ .ops = &mtk_clk_gate_ops,
+};
+
/* ethsys */
static const struct mtk_gate_regs eth_cg_regs = {
.set_ofs = 0x30,
@@ -643,10 +682,10 @@
}
static const struct mtk_gate eth_cgs[] = {
- GATE_ETH(CK_ETH_FE_EN, "eth_fe_en", CK_TOP_NETSYS_2X, 6),
- GATE_ETH(CK_ETH_GP2_EN, "eth_gp2_en", CK_TOP_SGM_325M, 7),
- GATE_ETH(CK_ETH_GP1_EN, "eth_gp1_en", CK_TOP_SGM_325M, 8),
- GATE_ETH(CK_ETH_WOCPU0_EN, "eth_wocpu0_en", CK_TOP_NETSYS_WED_MCU, 15),
+ GATE_ETH(CLK_ETH_FE_EN, "eth_fe_en", CLK_TOP_NETSYS_2X, 6),
+ GATE_ETH(CLK_ETH_GP2_EN, "eth_gp2_en", CLK_TOP_SGM_325M, 7),
+ GATE_ETH(CLK_ETH_GP1_EN, "eth_gp1_en", CLK_TOP_SGM_325M, 8),
+ GATE_ETH(CLK_ETH_WOCPU0_EN, "eth_wocpu0_en", CLK_TOP_NETSYS_WED_MCU, 15),
};
static int mt7981_ethsys_probe(struct udevice *dev)
diff --git a/drivers/clk/mediatek/clk-mt7986.c b/drivers/clk/mediatek/clk-mt7986.c
index efc3d41..c5cc772 100644
--- a/drivers/clk/mediatek/clk-mt7986.c
+++ b/drivers/clk/mediatek/clk-mt7986.c
@@ -18,6 +18,11 @@
#define MT7986_CLK_PDN 0x250
#define MT7986_CLK_PDN_EN_WRITE BIT(31)
+#define APMIXED_PARENT(_id) PARENT(_id, CLK_PARENT_APMIXED)
+#define INFRA_PARENT(_id) PARENT(_id, CLK_PARENT_INFRASYS)
+#define TOP_PARENT(_id) PARENT(_id, CLK_PARENT_TOPCKGEN)
+#define VOID_PARENT PARENT(-1, 0)
+
#define PLL_FACTOR(_id, _name, _parent, _mult, _div) \
FACTOR(_id, _parent, _mult, _div, CLK_PARENT_APMIXED)
@@ -29,177 +34,195 @@
/* FIXED PLLS */
static const struct mtk_fixed_clk fixed_pll_clks[] = {
- FIXED_CLK(CK_APMIXED_ARMPLL, CLK_XTAL, 2000000000),
- FIXED_CLK(CK_APMIXED_NET2PLL, CLK_XTAL, 800000000),
- FIXED_CLK(CK_APMIXED_MMPLL, CLK_XTAL, 1440000000),
- FIXED_CLK(CK_APMIXED_SGMPLL, CLK_XTAL, 325000000),
- FIXED_CLK(CK_APMIXED_WEDMCUPLL, CLK_XTAL, 760000000),
- FIXED_CLK(CK_APMIXED_NET1PLL, CLK_XTAL, 2500000000),
- FIXED_CLK(CK_APMIXED_MPLL, CLK_XTAL, 416000000),
- FIXED_CLK(CK_APMIXED_APLL2, CLK_XTAL, 196608000),
+ FIXED_CLK(CLK_APMIXED_ARMPLL, CLK_XTAL, 2000000000),
+ FIXED_CLK(CLK_APMIXED_NET2PLL, CLK_XTAL, 800000000),
+ FIXED_CLK(CLK_APMIXED_MMPLL, CLK_XTAL, 1440000000),
+ FIXED_CLK(CLK_APMIXED_SGMPLL, CLK_XTAL, 325000000),
+ FIXED_CLK(CLK_APMIXED_WEDMCUPLL, CLK_XTAL, 760000000),
+ FIXED_CLK(CLK_APMIXED_NET1PLL, CLK_XTAL, 2500000000),
+ FIXED_CLK(CLK_APMIXED_MPLL, CLK_XTAL, 416000000),
+ FIXED_CLK(CLK_APMIXED_APLL2, CLK_XTAL, 196608000),
};
/* TOPCKGEN FIXED CLK */
static const struct mtk_fixed_clk top_fixed_clks[] = {
- FIXED_CLK(CK_TOP_CB_CKSQ_40M, CLK_XTAL, 40000000),
+ FIXED_CLK(CLK_TOP_XTAL, CLK_XTAL, 40000000),
};
/* TOPCKGEN FIXED DIV */
static const struct mtk_fixed_factor top_fixed_divs[] = {
- PLL_FACTOR(CK_TOP_CB_M_416M, "cb_m_416m", CK_APMIXED_MPLL, 1, 1),
- PLL_FACTOR(CK_TOP_CB_M_D2, "cb_m_d2", CK_APMIXED_MPLL, 1, 2),
- PLL_FACTOR(CK_TOP_CB_M_D4, "cb_m_d4", CK_APMIXED_MPLL, 1, 4),
- PLL_FACTOR(CK_TOP_CB_M_D8, "cb_m_d8", CK_APMIXED_MPLL, 1, 8),
- PLL_FACTOR(CK_TOP_M_D8_D2, "m_d8_d2", CK_APMIXED_MPLL, 1, 16),
- PLL_FACTOR(CK_TOP_M_D3_D2, "m_d3_d2", CK_APMIXED_MPLL, 1, 2),
- PLL_FACTOR(CK_TOP_CB_MM_D2, "cb_mm_d2", CK_APMIXED_MMPLL, 1, 2),
- PLL_FACTOR(CK_TOP_CB_MM_D4, "cb_mm_d4", CK_APMIXED_MMPLL, 1, 4),
- PLL_FACTOR(CK_TOP_CB_MM_D8, "cb_mm_d8", CK_APMIXED_MMPLL, 1, 8),
- PLL_FACTOR(CK_TOP_MM_D8_D2, "mm_d8_d2", CK_APMIXED_MMPLL, 1, 16),
- PLL_FACTOR(CK_TOP_MM_D3_D8, "mm_d3_d8", CK_APMIXED_MMPLL, 1, 8),
- PLL_FACTOR(CK_TOP_CB_U2_PHYD_CK, "cb_u2_phyd", CK_APMIXED_MMPLL, 1, 30),
- PLL_FACTOR(CK_TOP_CB_APLL2_196M, "cb_apll2_196m", CK_APMIXED_APLL2, 1,
- 1),
- PLL_FACTOR(CK_TOP_APLL2_D4, "apll2_d4", CK_APMIXED_APLL2, 1, 4),
- PLL_FACTOR(CK_TOP_CB_NET1_D4, "cb_net1_d4", CK_APMIXED_NET1PLL, 1, 4),
- PLL_FACTOR(CK_TOP_CB_NET1_D5, "cb_net1_d5", CK_APMIXED_NET1PLL, 1, 5),
- PLL_FACTOR(CK_TOP_NET1_D5_D2, "net1_d5_d2", CK_APMIXED_NET1PLL, 1, 10),
- PLL_FACTOR(CK_TOP_NET1_D5_D4, "net1_d5_d4", CK_APMIXED_NET1PLL, 1, 20),
- PLL_FACTOR(CK_TOP_NET1_D8_D2, "net1_d8_d2", CK_APMIXED_NET1PLL, 1, 16),
- PLL_FACTOR(CK_TOP_NET1_D8_D4, "net1_d8_d4", CK_APMIXED_NET1PLL, 1, 32),
- PLL_FACTOR(CK_TOP_CB_NET2_800M, "cb_net2_800m", CK_APMIXED_NET2PLL, 1,
- 1),
- PLL_FACTOR(CK_TOP_CB_NET2_D4, "cb_net2_d4", CK_APMIXED_NET2PLL, 1, 4),
- PLL_FACTOR(CK_TOP_NET2_D4_D2, "net2_d4_d2", CK_APMIXED_NET2PLL, 1, 8),
- PLL_FACTOR(CK_TOP_NET2_D3_D2, "net2_d3_d2", CK_APMIXED_NET2PLL, 1, 2),
- PLL_FACTOR(CK_TOP_CB_WEDMCU_760M, "cb_wedmcu_760m",
- CK_APMIXED_WEDMCUPLL, 1, 1),
- PLL_FACTOR(CK_TOP_WEDMCU_D5_D2, "wedmcu_d5_d2", CK_APMIXED_WEDMCUPLL, 1,
- 10),
- PLL_FACTOR(CK_TOP_CB_SGM_325M, "cb_sgm_325m", CK_APMIXED_SGMPLL, 1, 1),
- TOP_FACTOR(CK_TOP_CB_CKSQ_40M_D2, "cb_cksq_40m_d2", CK_TOP_CB_CKSQ_40M,
+ /* TOP Factors */
+ TOP_FACTOR(CLK_TOP_XTAL_D2, "xtal_d2", CLK_TOP_XTAL,
1, 2),
- TOP_FACTOR(CK_TOP_CB_RTC_32K, "cb_rtc_32k", CK_TOP_CB_CKSQ_40M, 1,
+ TOP_FACTOR(CLK_TOP_RTC_32K, "rtc_32k", CLK_TOP_XTAL, 1,
1250),
- TOP_FACTOR(CK_TOP_CB_RTC_32P7K, "cb_rtc_32p7k", CK_TOP_CB_CKSQ_40M, 1,
+ TOP_FACTOR(CLK_TOP_RTC_32P7K, "rtc_32p7k", CLK_TOP_XTAL, 1,
1220),
- TOP_FACTOR(CK_TOP_NFI1X, "nfi1x", CK_TOP_NFI1X_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_USB_EQ_RX250M, "usb_eq_rx250m", CK_TOP_CB_CKSQ_40M, 1,
- 1),
- TOP_FACTOR(CK_TOP_USB_TX250M, "usb_tx250m", CK_TOP_CB_CKSQ_40M, 1, 1),
- TOP_FACTOR(CK_TOP_USB_LN0_CK, "usb_ln0", CK_TOP_CB_CKSQ_40M, 1, 1),
- TOP_FACTOR(CK_TOP_USB_CDR_CK, "usb_cdr", CK_TOP_CB_CKSQ_40M, 1, 1),
- TOP_FACTOR(CK_TOP_SPINFI_BCK, "spinfi_bck", CK_TOP_SPINFI_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_I2C_BCK, "i2c_bck", CK_TOP_I2C_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_PEXTP_TL, "pextp_tl", CK_TOP_PEXTP_TL_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_EMMC_250M, "emmc_250m", CK_TOP_EMMC_250M_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_EMMC_416M, "emmc_416m", CK_TOP_EMMC_416M_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_F_26M_ADC_CK, "f_26m_adc", CK_TOP_F_26M_ADC_SEL, 1,
- 1),
- TOP_FACTOR(CK_TOP_SYSAXI, "sysaxi", CK_TOP_SYSAXI_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_NETSYS_WED_MCU, "netsys_wed_mcu",
- CK_TOP_NETSYS_MCU_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_NETSYS_2X, "netsys_2x", CK_TOP_NETSYS_2X_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_SGM_325M, "sgm_325m", CK_TOP_SGM_325M_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_A1SYS, "a1sys", CK_TOP_A1SYS_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_EIP_B, "eip_b", CK_TOP_EIP_B_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_F26M, "csw_f26m", CK_TOP_F26M_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_AUD_L, "aud_l", CK_TOP_AUD_L_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_A_TUNER, "a_tuner", CK_TOP_A_TUNER_SEL, 2, 1),
- TOP_FACTOR(CK_TOP_U2U3_REF, "u2u3_ref", CK_TOP_U2U3_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_U2U3_SYS, "u2u3_sys", CK_TOP_U2U3_SYS_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_U2U3_XHCI, "u2u3_xhci", CK_TOP_U2U3_XHCI_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_AP2CNN_HOST, "ap2cnn_host", CK_TOP_AP2CNN_HOST_SEL, 1,
- 1),
+ /* Not defined upstream and not used */
+ /* TOP_FACTOR(CLK_TOP_A_TUNER, "a_tuner", CLK_TOP_A_TUNER_SEL, 2, 1), */
+ /* MPLL */
+ PLL_FACTOR(CLK_TOP_MPLL_D2, "mpll_d2", CLK_APMIXED_MPLL, 1, 2),
+ PLL_FACTOR(CLK_TOP_MPLL_D4, "mpll_d4", CLK_APMIXED_MPLL, 1, 4),
+ PLL_FACTOR(CLK_TOP_MPLL_D8, "mpll_d8", CLK_APMIXED_MPLL, 1, 8),
+ PLL_FACTOR(CLK_TOP_MPLL_D8_D2, "mpll_d8_d2", CLK_APMIXED_MPLL, 1, 16),
+ PLL_FACTOR(CLK_TOP_MPLL_D3_D2, "mpll_d3_d2", CLK_APMIXED_MPLL, 1, 2),
+ /* MMPLL */
+ PLL_FACTOR(CLK_TOP_MMPLL_D2, "mmpll_d2", CLK_APMIXED_MMPLL, 1, 2),
+ PLL_FACTOR(CLK_TOP_MMPLL_D4, "mmpll_d4", CLK_APMIXED_MMPLL, 1, 4),
+ PLL_FACTOR(CLK_TOP_MMPLL_D8, "mmpll_d8", CLK_APMIXED_MMPLL, 1, 8),
+ PLL_FACTOR(CLK_TOP_MMPLL_D8_D2, "mmpll_d8_d2", CLK_APMIXED_MMPLL, 1, 16),
+ PLL_FACTOR(CLK_TOP_MMPLL_D3_D8, "mmpll_d3_d8", CLK_APMIXED_MMPLL, 1, 8),
+ PLL_FACTOR(CLK_TOP_MMPLL_U2PHYD, "mmpll_u2phy", CLK_APMIXED_MMPLL, 1, 30),
+ /* APLL2 */
+ PLL_FACTOR(CLK_TOP_APLL2_D4, "apll2_d4", CLK_APMIXED_APLL2, 1, 4),
+ /* NET1PLL */
+ PLL_FACTOR(CLK_TOP_NET1PLL_D4, "net1pll_d4", CLK_APMIXED_NET1PLL, 1, 4),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D5, "net1pll_d5", CLK_APMIXED_NET1PLL, 1, 5),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D5_D2, "net1pll_d5_d2", CLK_APMIXED_NET1PLL, 1, 10),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D5_D4, "net1pll_d5_d4", CLK_APMIXED_NET1PLL, 1, 20),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D8_D2, "net1pll_d8_d2", CLK_APMIXED_NET1PLL, 1, 16),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D8_D4, "net1pll_d8_d4", CLK_APMIXED_NET1PLL, 1, 32),
+ /* NET2PLL */
+ PLL_FACTOR(CLK_TOP_NET2PLL_D4, "net2pll_d4", CLK_APMIXED_NET2PLL, 1, 4),
+ PLL_FACTOR(CLK_TOP_NET2PLL_D4_D2, "net2pll_d4_d2", CLK_APMIXED_NET2PLL, 1, 8),
+ PLL_FACTOR(CLK_TOP_NET2PLL_D3_D2, "net2pll_d3_d2", CLK_APMIXED_NET2PLL, 1, 2),
+ /* WEDMCUPLL */
+ PLL_FACTOR(CLK_TOP_WEDMCUPLL_D5_D2, "wedmcupll_d5_d2", CLK_APMIXED_WEDMCUPLL, 1,
+ 10),
};
/* TOPCKGEN MUX PARENTS */
-static const int nfi1x_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_MM_D8,
- CK_TOP_NET1_D8_D2, CK_TOP_NET2_D3_D2,
- CK_TOP_CB_M_D4, CK_TOP_MM_D8_D2,
- CK_TOP_WEDMCU_D5_D2, CK_TOP_CB_M_D8 };
+static const struct mtk_parent nfi1x_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MMPLL_D8),
+ TOP_PARENT(CLK_TOP_NET1PLL_D8_D2), TOP_PARENT(CLK_TOP_NET2PLL_D3_D2),
+ TOP_PARENT(CLK_TOP_MPLL_D4), TOP_PARENT(CLK_TOP_MMPLL_D8_D2),
+ TOP_PARENT(CLK_TOP_WEDMCUPLL_D5_D2), TOP_PARENT(CLK_TOP_MPLL_D8),
+};
-static const int spinfi_parents[] = {
- CK_TOP_CB_CKSQ_40M_D2, CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D5_D4,
- CK_TOP_CB_M_D4, CK_TOP_MM_D8_D2, CK_TOP_WEDMCU_D5_D2,
- CK_TOP_MM_D3_D8, CK_TOP_CB_M_D8
+static const struct mtk_parent spinfi_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL_D2), TOP_PARENT(CLK_TOP_XTAL),
+ TOP_PARENT(CLK_TOP_NET1PLL_D5_D4), TOP_PARENT(CLK_TOP_MPLL_D4),
+ TOP_PARENT(CLK_TOP_MMPLL_D8_D2), TOP_PARENT(CLK_TOP_WEDMCUPLL_D5_D2),
+ TOP_PARENT(CLK_TOP_MMPLL_D3_D8), TOP_PARENT(CLK_TOP_MPLL_D8),
};
-static const int spi_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_M_D2,
- CK_TOP_CB_MM_D8, CK_TOP_NET1_D8_D2,
- CK_TOP_NET2_D3_D2, CK_TOP_NET1_D5_D4,
- CK_TOP_CB_M_D4, CK_TOP_WEDMCU_D5_D2 };
+static const struct mtk_parent spi_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MPLL_D2),
+ TOP_PARENT(CLK_TOP_MMPLL_D8), TOP_PARENT(CLK_TOP_NET1PLL_D8_D2),
+ TOP_PARENT(CLK_TOP_NET2PLL_D3_D2), TOP_PARENT(CLK_TOP_NET1PLL_D5_D4),
+ TOP_PARENT(CLK_TOP_MPLL_D4), TOP_PARENT(CLK_TOP_WEDMCUPLL_D5_D2),
+};
-static const int uart_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_M_D8,
- CK_TOP_M_D8_D2 };
+static const struct mtk_parent uart_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MPLL_D8),
+ TOP_PARENT(CLK_TOP_MPLL_D8_D2),
+};
-static const int pwm_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D8_D2,
- CK_TOP_NET1_D5_D4, CK_TOP_CB_M_D4 };
+static const struct mtk_parent pwm_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D8_D2),
+ TOP_PARENT(CLK_TOP_NET1PLL_D5_D4), TOP_PARENT(CLK_TOP_MPLL_D4),
+};
-static const int i2c_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D5_D4,
- CK_TOP_CB_M_D4, CK_TOP_NET1_D8_D4 };
+static const struct mtk_parent i2c_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D5_D4),
+ TOP_PARENT(CLK_TOP_MPLL_D4), TOP_PARENT(CLK_TOP_NET1PLL_D8_D4),
+};
-static const int pextp_tl_ck_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_NET1_D5_D4, CK_TOP_NET2_D4_D2,
- CK_TOP_CB_RTC_32K };
+static const struct mtk_parent pextp_tl_ck_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D5_D4),
+ TOP_PARENT(CLK_TOP_NET2PLL_D4_D2), TOP_PARENT(CLK_TOP_RTC_32K),
+};
-static const int emmc_250m_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_NET1_D5_D2 };
+static const struct mtk_parent emmc_250m_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D5_D2),
+};
-static const int emmc_416m_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_M_416M };
+static const struct mtk_parent emmc_416m_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_MPLL),
+};
-static const int f_26m_adc_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_M_D8_D2 };
+static const struct mtk_parent f_26m_adc_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MPLL_D8_D2),
+};
-static const int dramc_md32_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_M_D2 };
+static const struct mtk_parent dramc_md32_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MPLL_D2),
+};
-static const int sysaxi_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D8_D2,
- CK_TOP_CB_NET2_D4 };
+static const struct mtk_parent sysaxi_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D8_D2),
+ TOP_PARENT(CLK_TOP_NET2PLL_D4),
+};
-static const int sysapb_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_M_D3_D2,
- CK_TOP_NET2_D4_D2 };
+static const struct mtk_parent sysapb_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MPLL_D3_D2),
+ TOP_PARENT(CLK_TOP_NET2PLL_D4_D2),
+};
-static const int arm_db_main_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_NET2_D3_D2 };
+static const struct mtk_parent arm_db_main_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET2PLL_D3_D2),
+};
-static const int arm_db_jtsel_parents[] = { -1, CK_TOP_CB_CKSQ_40M };
+static const struct mtk_parent arm_db_jtsel_parents[] = {
+ VOID_PARENT, TOP_PARENT(CLK_TOP_XTAL),
+};
-static const int netsys_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_MM_D4 };
+static const struct mtk_parent netsys_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MMPLL_D4),
+};
-static const int netsys_500m_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET1_D5 };
+static const struct mtk_parent netsys_500m_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D5),
+};
-static const int netsys_mcu_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_WEDMCU_760M,
- CK_TOP_CB_MM_D2, CK_TOP_CB_NET1_D4,
- CK_TOP_CB_NET1_D5 };
+static const struct mtk_parent netsys_mcu_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_WEDMCUPLL),
+ TOP_PARENT(CLK_TOP_MMPLL_D2), TOP_PARENT(CLK_TOP_NET1PLL_D4),
+ TOP_PARENT(CLK_TOP_NET1PLL_D5),
+};
-static const int netsys_2x_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET2_800M,
- CK_TOP_CB_WEDMCU_760M,
- CK_TOP_CB_MM_D2 };
+static const struct mtk_parent netsys_2x_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_APMIXED_NET2PLL),
+ APMIXED_PARENT(CLK_APMIXED_WEDMCUPLL), TOP_PARENT(CLK_TOP_MMPLL_D2),
+};
-static const int sgm_325m_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_SGM_325M };
+static const struct mtk_parent sgm_325m_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_SGMPLL),
+};
-static const int sgm_reg_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D8_D4 };
+static const struct mtk_parent sgm_reg_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D8_D4),
+};
-static const int a1sys_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_APLL2_D4 };
+static const struct mtk_parent a1sys_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_APLL2_D4),
+};
-static const int conn_mcusys_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_MM_D2 };
+static const struct mtk_parent conn_mcusys_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MMPLL_D2),
+};
-static const int eip_b_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_NET2_800M };
+static const struct mtk_parent eip_b_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_NET2PLL),
+};
-static const int aud_l_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_APLL2_196M,
- CK_TOP_M_D8_D2 };
+static const struct mtk_parent aud_l_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_APLL2),
+ TOP_PARENT(CLK_TOP_MPLL_D8_D2),
+};
-static const int a_tuner_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_APLL2_D4,
- CK_TOP_M_D8_D2 };
+static const struct mtk_parent a_tuner_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_APLL2_D4),
+ TOP_PARENT(CLK_TOP_MPLL_D8_D2),
+};
-static const int u2u3_sys_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D5_D4 };
+static const struct mtk_parent u2u3_sys_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D5_D4),
+};
-static const int da_u2_refsel_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_U2_PHYD_CK };
+static const struct mtk_parent da_u2_refsel_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MMPLL_U2PHYD),
+};
#define TOP_MUX(_id, _name, _parents, _mux_ofs, _mux_set_ofs, _mux_clr_ofs, \
_shift, _width, _gate, _upd_ofs, _upd) \
@@ -208,199 +231,167 @@
.mux_clr_reg = _mux_clr_ofs, .upd_reg = _upd_ofs, \
.upd_shift = _upd, .mux_shift = _shift, \
.mux_mask = BIT(_width) - 1, .gate_reg = _mux_ofs, \
- .gate_shift = _gate, .parent = _parents, \
+ .gate_shift = _gate, .parent_flags = _parents, \
.num_parents = ARRAY_SIZE(_parents), \
- .flags = CLK_MUX_SETCLR_UPD, \
+ .flags = CLK_MUX_SETCLR_UPD | CLK_PARENT_MIXED, \
}
/* TOPCKGEN MUX_GATE */
static const struct mtk_composite top_muxes[] = {
/* CLK_CFG_0 */
- TOP_MUX(CK_TOP_NFI1X_SEL, "nfi1x_sel", nfi1x_parents, 0x000, 0x004,
+ TOP_MUX(CLK_TOP_NFI1X_SEL, "nfi1x_sel", nfi1x_parents, 0x000, 0x004,
0x008, 0, 3, 7, 0x1C0, 0),
- TOP_MUX(CK_TOP_SPINFI_SEL, "spinfi_sel", spinfi_parents, 0x000, 0x004,
+ TOP_MUX(CLK_TOP_SPINFI_SEL, "spinfi_sel", spinfi_parents, 0x000, 0x004,
0x008, 8, 3, 15, 0x1C0, 1),
- TOP_MUX(CK_TOP_SPI_SEL, "spi_sel", spi_parents, 0x000, 0x004, 0x008, 16,
+ TOP_MUX(CLK_TOP_SPI_SEL, "spi_sel", spi_parents, 0x000, 0x004, 0x008, 16,
3, 23, 0x1C0, 2),
- TOP_MUX(CK_TOP_SPIM_MST_SEL, "spim_mst_sel", spi_parents, 0x000, 0x004,
+ TOP_MUX(CLK_TOP_SPIM_MST_SEL, "spim_mst_sel", spi_parents, 0x000, 0x004,
0x008, 24, 3, 31, 0x1C0, 3),
/* CLK_CFG_1 */
- TOP_MUX(CK_TOP_UART_SEL, "uart_sel", uart_parents, 0x010, 0x014, 0x018,
+ TOP_MUX(CLK_TOP_UART_SEL, "uart_sel", uart_parents, 0x010, 0x014, 0x018,
0, 2, 7, 0x1C0, 4),
- TOP_MUX(CK_TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x010, 0x014, 0x018, 8,
+ TOP_MUX(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x010, 0x014, 0x018, 8,
2, 15, 0x1C0, 5),
- TOP_MUX(CK_TOP_I2C_SEL, "i2c_sel", i2c_parents, 0x010, 0x014, 0x018, 16,
+ TOP_MUX(CLK_TOP_I2C_SEL, "i2c_sel", i2c_parents, 0x010, 0x014, 0x018, 16,
2, 23, 0x1C0, 6),
- TOP_MUX(CK_TOP_PEXTP_TL_SEL, "pextp_tl_ck_sel", pextp_tl_ck_parents,
+ TOP_MUX(CLK_TOP_PEXTP_TL_SEL, "pextp_tl_ck_sel", pextp_tl_ck_parents,
0x010, 0x014, 0x018, 24, 2, 31, 0x1C0, 7),
/* CLK_CFG_2 */
- TOP_MUX(CK_TOP_EMMC_250M_SEL, "emmc_250m_sel", emmc_250m_parents, 0x020,
+ TOP_MUX(CLK_TOP_EMMC_250M_SEL, "emmc_250m_sel", emmc_250m_parents, 0x020,
0x024, 0x028, 0, 1, 7, 0x1C0, 8),
- TOP_MUX(CK_TOP_EMMC_416M_SEL, "emmc_416m_sel", emmc_416m_parents, 0x020,
+ TOP_MUX(CLK_TOP_EMMC_416M_SEL, "emmc_416m_sel", emmc_416m_parents, 0x020,
0x024, 0x028, 8, 1, 15, 0x1C0, 9),
- TOP_MUX(CK_TOP_F_26M_ADC_SEL, "f_26m_adc_sel", f_26m_adc_parents, 0x020,
+ TOP_MUX(CLK_TOP_F_26M_ADC_SEL, "f_26m_adc_sel", f_26m_adc_parents, 0x020,
0x024, 0x028, 16, 1, 23, 0x1C0, 10),
- TOP_MUX(CK_TOP_DRAMC_SEL, "dramc_sel", f_26m_adc_parents, 0x020, 0x024,
+ TOP_MUX(CLK_TOP_DRAMC_SEL, "dramc_sel", f_26m_adc_parents, 0x020, 0x024,
0x028, 24, 1, 31, 0x1C0, 11),
/* CLK_CFG_3 */
- TOP_MUX(CK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel", dramc_md32_parents,
+ TOP_MUX(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel", dramc_md32_parents,
0x030, 0x034, 0x038, 0, 1, 7, 0x1C0, 12),
- TOP_MUX(CK_TOP_SYSAXI_SEL, "sysaxi_sel", sysaxi_parents, 0x030, 0x034,
+ TOP_MUX(CLK_TOP_SYSAXI_SEL, "sysaxi_sel", sysaxi_parents, 0x030, 0x034,
0x038, 8, 2, 15, 0x1C0, 13),
- TOP_MUX(CK_TOP_SYSAPB_SEL, "sysapb_sel", sysapb_parents, 0x030, 0x034,
+ TOP_MUX(CLK_TOP_SYSAPB_SEL, "sysapb_sel", sysapb_parents, 0x030, 0x034,
0x038, 16, 2, 23, 0x1C0, 14),
- TOP_MUX(CK_TOP_ARM_DB_MAIN_SEL, "arm_db_main_sel", arm_db_main_parents,
+ TOP_MUX(CLK_TOP_ARM_DB_MAIN_SEL, "arm_db_main_sel", arm_db_main_parents,
0x030, 0x034, 0x038, 24, 1, 31, 0x1C0, 15),
/* CLK_CFG_4 */
- TOP_MUX(CK_TOP_ARM_DB_JTSEL, "arm_db_jtsel", arm_db_jtsel_parents,
+ TOP_MUX(CLK_TOP_ARM_DB_JTSEL, "arm_db_jtsel", arm_db_jtsel_parents,
0x040, 0x044, 0x048, 0, 1, 7, 0x1C0, 16),
- TOP_MUX(CK_TOP_NETSYS_SEL, "netsys_sel", netsys_parents, 0x040, 0x044,
+ TOP_MUX(CLK_TOP_NETSYS_SEL, "netsys_sel", netsys_parents, 0x040, 0x044,
0x048, 8, 1, 15, 0x1C0, 17),
- TOP_MUX(CK_TOP_NETSYS_500M_SEL, "netsys_500m_sel", netsys_500m_parents,
+ TOP_MUX(CLK_TOP_NETSYS_500M_SEL, "netsys_500m_sel", netsys_500m_parents,
0x040, 0x044, 0x048, 16, 1, 23, 0x1C0, 18),
- TOP_MUX(CK_TOP_NETSYS_MCU_SEL, "netsys_mcu_sel", netsys_mcu_parents,
+ TOP_MUX(CLK_TOP_NETSYS_MCU_SEL, "netsys_mcu_sel", netsys_mcu_parents,
0x040, 0x044, 0x048, 24, 3, 31, 0x1C0, 19),
/* CLK_CFG_5 */
- TOP_MUX(CK_TOP_NETSYS_2X_SEL, "netsys_2x_sel", netsys_2x_parents, 0x050,
+ TOP_MUX(CLK_TOP_NETSYS_2X_SEL, "netsys_2x_sel", netsys_2x_parents, 0x050,
0x054, 0x058, 0, 2, 7, 0x1C0, 20),
- TOP_MUX(CK_TOP_SGM_325M_SEL, "sgm_325m_sel", sgm_325m_parents, 0x050,
+ TOP_MUX(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel", sgm_325m_parents, 0x050,
0x054, 0x058, 8, 1, 15, 0x1C0, 21),
- TOP_MUX(CK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents, 0x050,
+ TOP_MUX(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents, 0x050,
0x054, 0x058, 16, 1, 23, 0x1C0, 22),
- TOP_MUX(CK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents, 0x050, 0x054,
+ TOP_MUX(CLK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents, 0x050, 0x054,
0x058, 24, 1, 31, 0x1C0, 23),
/* CLK_CFG_6 */
- TOP_MUX(CK_TOP_CONN_MCUSYS_SEL, "conn_mcusys_sel", conn_mcusys_parents,
+ TOP_MUX(CLK_TOP_CONN_MCUSYS_SEL, "conn_mcusys_sel", conn_mcusys_parents,
0x060, 0x064, 0x068, 0, 1, 7, 0x1C0, 24),
- TOP_MUX(CK_TOP_EIP_B_SEL, "eip_b_sel", eip_b_parents, 0x060, 0x064,
+ TOP_MUX(CLK_TOP_EIP_B_SEL, "eip_b_sel", eip_b_parents, 0x060, 0x064,
0x068, 8, 1, 15, 0x1C0, 25),
- TOP_MUX(CK_TOP_PCIE_PHY_SEL, "pcie_phy_sel", f_26m_adc_parents, 0x060,
+ TOP_MUX(CLK_TOP_PCIE_PHY_SEL, "pcie_phy_sel", f_26m_adc_parents, 0x060,
0x064, 0x068, 16, 1, 23, 0x1C0, 26),
- TOP_MUX(CK_TOP_USB3_PHY_SEL, "usb3_phy_sel", f_26m_adc_parents, 0x060,
+ TOP_MUX(CLK_TOP_USB3_PHY_SEL, "usb3_phy_sel", f_26m_adc_parents, 0x060,
0x064, 0x068, 24, 1, 31, 0x1C0, 27),
/* CLK_CFG_7 */
- TOP_MUX(CK_TOP_F26M_SEL, "csw_f26m_sel", f_26m_adc_parents, 0x070,
+ TOP_MUX(CLK_TOP_F26M_SEL, "csw_f26m_sel", f_26m_adc_parents, 0x070,
0x074, 0x078, 0, 1, 7, 0x1C0, 28),
- TOP_MUX(CK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents, 0x070, 0x074,
+ TOP_MUX(CLK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents, 0x070, 0x074,
0x078, 8, 2, 15, 0x1C0, 29),
- TOP_MUX(CK_TOP_A_TUNER_SEL, "a_tuner_sel", a_tuner_parents, 0x070,
+ TOP_MUX(CLK_TOP_A_TUNER_SEL, "a_tuner_sel", a_tuner_parents, 0x070,
0x074, 0x078, 16, 2, 23, 0x1C0, 30),
- TOP_MUX(CK_TOP_U2U3_SEL, "u2u3_sel", f_26m_adc_parents, 0x070, 0x074,
+ TOP_MUX(CLK_TOP_U2U3_SEL, "u2u3_sel", f_26m_adc_parents, 0x070, 0x074,
0x078, 24, 1, 31, 0x1C4, 0),
/* CLK_CFG_8 */
- TOP_MUX(CK_TOP_U2U3_SYS_SEL, "u2u3_sys_sel", u2u3_sys_parents, 0x080,
+ TOP_MUX(CLK_TOP_U2U3_SYS_SEL, "u2u3_sys_sel", u2u3_sys_parents, 0x080,
0x084, 0x088, 0, 1, 7, 0x1C4, 1),
- TOP_MUX(CK_TOP_U2U3_XHCI_SEL, "u2u3_xhci_sel", u2u3_sys_parents, 0x080,
+ TOP_MUX(CLK_TOP_U2U3_XHCI_SEL, "u2u3_xhci_sel", u2u3_sys_parents, 0x080,
0x084, 0x088, 8, 1, 15, 0x1C4, 2),
- TOP_MUX(CK_TOP_DA_U2_REFSEL, "da_u2_refsel", da_u2_refsel_parents,
+ TOP_MUX(CLK_TOP_DA_U2_REFSEL, "da_u2_refsel", da_u2_refsel_parents,
0x080, 0x084, 0x088, 16, 1, 23, 0x1C4, 3),
- TOP_MUX(CK_TOP_DA_U2_CK_1P_SEL, "da_u2_ck_1p_sel", da_u2_refsel_parents,
+ TOP_MUX(CLK_TOP_DA_U2_CK_1P_SEL, "da_u2_ck_1p_sel", da_u2_refsel_parents,
0x080, 0x084, 0x088, 24, 1, 31, 0x1C4, 4),
/* CLK_CFG_9 */
- TOP_MUX(CK_TOP_AP2CNN_HOST_SEL, "ap2cnn_host_sel", sgm_reg_parents,
+ TOP_MUX(CLK_TOP_AP2CNN_HOST_SEL, "ap2cnn_host_sel", sgm_reg_parents,
0x090, 0x094, 0x098, 0, 1, 7, 0x1C4, 5),
};
/* INFRA FIXED DIV */
static const struct mtk_fixed_factor infra_fixed_divs[] = {
- TOP_FACTOR(CK_INFRA_CK_F26M, "infra_ck_f26m", CK_TOP_F26M_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_UART, "infra_uart", CK_TOP_UART_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_ISPI0, "infra_ispi0", CK_TOP_SPI_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_I2C, "infra_i2c", CK_TOP_I2C_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_ISPI1, "infra_ispi1", CK_TOP_SPINFI_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_PWM, "infra_pwm", CK_TOP_PWM_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_66M_MCK, "infra_66m_mck", CK_TOP_SYSAXI_SEL, 1, 2),
- TOP_FACTOR(CK_INFRA_CK_F32K, "infra_ck_f32k", CK_TOP_CB_RTC_32P7K, 1,
- 1),
- TOP_FACTOR(CK_INFRA_PCIE_CK, "infra_pcie", CK_TOP_PEXTP_TL_SEL, 1, 1),
- INFRA_FACTOR(CK_INFRA_PWM_BCK, "infra_pwm_bck", CK_INFRA_PWM_BSEL, 1,
- 1),
- INFRA_FACTOR(CK_INFRA_PWM_CK1, "infra_pwm_ck1", CK_INFRA_PWM1_SEL, 1,
- 1),
- INFRA_FACTOR(CK_INFRA_PWM_CK2, "infra_pwm_ck2", CK_INFRA_PWM2_SEL, 1,
- 1),
- TOP_FACTOR(CK_INFRA_133M_HCK, "infra_133m_hck", CK_TOP_SYSAXI, 1, 1),
- TOP_FACTOR(CK_INFRA_EIP_CK, "infra_eip", CK_TOP_EIP_B, 1, 1),
- INFRA_FACTOR(CK_INFRA_66M_PHCK, "infra_66m_phck", CK_INFRA_133M_HCK, 1,
- 1),
- TOP_FACTOR(CK_INFRA_FAUD_L_CK, "infra_faud_l", CK_TOP_AUD_L, 1, 1),
- TOP_FACTOR(CK_INFRA_FAUD_AUD_CK, "infra_faud_aud", CK_TOP_A1SYS, 1, 1),
- TOP_FACTOR(CK_INFRA_FAUD_EG2_CK, "infra_faud_eg2", CK_TOP_A_TUNER, 1,
- 1),
- TOP_FACTOR(CK_INFRA_I2CS_CK, "infra_i2cs", CK_TOP_I2C_BCK, 1, 1),
- INFRA_FACTOR(CK_INFRA_MUX_UART0, "infra_mux_uart0", CK_INFRA_UART0_SEL,
- 1, 1),
- INFRA_FACTOR(CK_INFRA_MUX_UART1, "infra_mux_uart1", CK_INFRA_UART1_SEL,
- 1, 1),
- INFRA_FACTOR(CK_INFRA_MUX_UART2, "infra_mux_uart2", CK_INFRA_UART2_SEL,
- 1, 1),
- TOP_FACTOR(CK_INFRA_NFI_CK, "infra_nfi", CK_TOP_NFI1X, 1, 1),
- TOP_FACTOR(CK_INFRA_SPINFI_CK, "infra_spinfi", CK_TOP_SPINFI_BCK, 1, 1),
- INFRA_FACTOR(CK_INFRA_MUX_SPI0, "infra_mux_spi0", CK_INFRA_SPI0_SEL, 1,
- 1),
- INFRA_FACTOR(CK_INFRA_MUX_SPI1, "infra_mux_spi1", CK_INFRA_SPI1_SEL, 1,
- 1),
- TOP_FACTOR(CK_INFRA_RTC_32K, "infra_rtc_32k", CK_TOP_CB_RTC_32K, 1, 1),
- TOP_FACTOR(CK_INFRA_FMSDC_CK, "infra_fmsdc", CK_TOP_EMMC_416M, 1, 1),
- TOP_FACTOR(CK_INFRA_FMSDC_HCK_CK, "infra_fmsdc_hck", CK_TOP_EMMC_250M,
- 1, 1),
- TOP_FACTOR(CK_INFRA_PERI_133M, "infra_peri_133m", CK_TOP_SYSAXI, 1, 1),
- TOP_FACTOR(CK_INFRA_133M_PHCK, "infra_133m_phck", CK_TOP_SYSAXI, 1, 1),
- TOP_FACTOR(CK_INFRA_USB_SYS_CK, "infra_usb_sys", CK_TOP_U2U3_SYS, 1, 1),
- TOP_FACTOR(CK_INFRA_USB_CK, "infra_usb", CK_TOP_U2U3_REF, 1, 1),
- TOP_FACTOR(CK_INFRA_USB_XHCI_CK, "infra_usb_xhci", CK_TOP_U2U3_XHCI, 1,
- 1),
- TOP_FACTOR(CK_INFRA_PCIE_GFMUX_TL_O_PRE, "infra_pcie_mux",
- CK_TOP_PEXTP_TL, 1, 1),
- TOP_FACTOR(CK_INFRA_F26M_CK0, "infra_f26m_ck0", CK_TOP_F26M, 1, 1),
- TOP_FACTOR(CK_INFRA_HD_133M, "infra_hd_133m", CK_TOP_SYSAXI, 1, 1),
+ TOP_FACTOR(CLK_INFRA_SYSAXI_D2, "infra_sysaxi_d2", CLK_TOP_SYSAXI_SEL, 1, 2),
};
/* INFRASYS MUX PARENTS */
-static const int infra_uart0_parents[] = { CK_INFRA_CK_F26M, CK_INFRA_UART };
-static const int infra_spi0_parents[] = { CK_INFRA_I2C, CK_INFRA_ISPI0 };
-static const int infra_spi1_parents[] = { CK_INFRA_I2C, CK_INFRA_ISPI1 };
+static const struct mtk_parent infra_uart0_parents[] = {
+ TOP_PARENT(CLK_TOP_F26M_SEL),
+ TOP_PARENT(CLK_TOP_UART_SEL)
+};
+
+static const struct mtk_parent infra_spi0_parents[] = {
+ TOP_PARENT(CLK_TOP_I2C_SEL),
+ TOP_PARENT(CLK_TOP_SPI_SEL)
+};
-static const int infra_pwm_bsel_parents[] = { CK_INFRA_CK_F32K,
- CK_INFRA_CK_F26M,
- CK_INFRA_66M_MCK, CK_INFRA_PWM };
+static const struct mtk_parent infra_spi1_parents[] = {
+ TOP_PARENT(CLK_TOP_I2C_SEL),
+ TOP_PARENT(CLK_TOP_SPINFI_SEL)
+};
-static const int infra_pcie_parents[] = { CK_INFRA_CK_F32K, CK_INFRA_CK_F26M,
- -1, CK_INFRA_PCIE_CK };
+static const struct mtk_parent infra_pwm_bsel_parents[] = {
+ TOP_PARENT(CLK_TOP_RTC_32P7K),
+ TOP_PARENT(CLK_TOP_F26M_SEL),
+ INFRA_PARENT(CLK_INFRA_SYSAXI_D2),
+ TOP_PARENT(CLK_TOP_PWM_SEL)
+};
+
+static const struct mtk_parent infra_pcie_parents[] = {
+ TOP_PARENT(CLK_TOP_RTC_32P7K),
+ TOP_PARENT(CLK_TOP_F26M_SEL),
+ TOP_PARENT(CLK_TOP_XTAL),
+ TOP_PARENT(CLK_TOP_PEXTP_TL_SEL)
+};
#define INFRA_MUX(_id, _name, _parents, _reg, _shift, _width) \
{ \
.id = _id, .mux_reg = (_reg) + 0x8, \
.mux_set_reg = (_reg) + 0x0, .mux_clr_reg = (_reg) + 0x4, \
.mux_shift = _shift, .mux_mask = BIT(_width) - 1, \
- .parent = _parents, .num_parents = ARRAY_SIZE(_parents), \
- .flags = CLK_MUX_SETCLR_UPD | CLK_PARENT_INFRASYS, \
+ .parent_flags = _parents, .num_parents = ARRAY_SIZE(_parents), \
+ .flags = CLK_MUX_SETCLR_UPD | CLK_PARENT_MIXED, \
}
/* INFRA MUX */
static const struct mtk_composite infra_muxes[] = {
/* MODULE_CLK_SEL_0 */
- INFRA_MUX(CK_INFRA_UART0_SEL, "infra_uart0_sel", infra_uart0_parents,
+ INFRA_MUX(CLK_INFRA_UART0_SEL, "infra_uart0_sel", infra_uart0_parents,
0x10, 0, 1),
- INFRA_MUX(CK_INFRA_UART1_SEL, "infra_uart1_sel", infra_uart0_parents,
+ INFRA_MUX(CLK_INFRA_UART1_SEL, "infra_uart1_sel", infra_uart0_parents,
0x10, 1, 1),
- INFRA_MUX(CK_INFRA_UART2_SEL, "infra_uart2_sel", infra_uart0_parents,
+ INFRA_MUX(CLK_INFRA_UART2_SEL, "infra_uart2_sel", infra_uart0_parents,
0x10, 2, 1),
- INFRA_MUX(CK_INFRA_SPI0_SEL, "infra_spi0_sel", infra_spi0_parents, 0x10,
+ INFRA_MUX(CLK_INFRA_SPI0_SEL, "infra_spi0_sel", infra_spi0_parents, 0x10,
4, 1),
- INFRA_MUX(CK_INFRA_SPI1_SEL, "infra_spi1_sel", infra_spi1_parents, 0x10,
+ INFRA_MUX(CLK_INFRA_SPI1_SEL, "infra_spi1_sel", infra_spi1_parents, 0x10,
5, 1),
- INFRA_MUX(CK_INFRA_PWM1_SEL, "infra_pwm1_sel", infra_pwm_bsel_parents,
+ INFRA_MUX(CLK_INFRA_PWM1_SEL, "infra_pwm1_sel", infra_pwm_bsel_parents,
0x10, 9, 2),
- INFRA_MUX(CK_INFRA_PWM2_SEL, "infra_pwm2_sel", infra_pwm_bsel_parents,
+ INFRA_MUX(CLK_INFRA_PWM2_SEL, "infra_pwm2_sel", infra_pwm_bsel_parents,
0x10, 11, 2),
- INFRA_MUX(CK_INFRA_PWM_BSEL, "infra_pwm_bsel", infra_pwm_bsel_parents,
+ INFRA_MUX(CLK_INFRA_PWM_BSEL, "infra_pwm_bsel", infra_pwm_bsel_parents,
0x10, 13, 2),
/* MODULE_CLK_SEL_1 */
- INFRA_MUX(CK_INFRA_PCIE_SEL, "infra_pcie_sel", infra_pcie_parents, 0x20,
+ INFRA_MUX(CLK_INFRA_PCIE_SEL, "infra_pcie_sel", infra_pcie_parents, 0x20,
0, 2),
};
@@ -422,113 +413,131 @@
.sta_ofs = 0x68,
};
-#define GATE_INFRA0(_id, _name, _parent, _shift) \
+#define GATE_INFRA0(_id, _name, _parent, _shift, _flags) \
{ \
.id = _id, .parent = _parent, .regs = &infra_0_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_INFRASYS, \
+ .flags = _flags, \
}
+#define GATE_INFRA0_INFRA(_id, _name, _parent, _shift) \
+ GATE_INFRA0(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_INFRASYS)
+#define GATE_INFRA0_TOP(_id, _name, _parent, _shift) \
+ GATE_INFRA0(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
-#define GATE_INFRA1(_id, _name, _parent, _shift) \
+#define GATE_INFRA1(_id, _name, _parent, _shift, _flags) \
{ \
.id = _id, .parent = _parent, .regs = &infra_1_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_INFRASYS, \
+ .flags = _flags, \
}
+#define GATE_INFRA1_INFRA(_id, _name, _parent, _shift) \
+ GATE_INFRA1(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_INFRASYS)
+#define GATE_INFRA1_TOP(_id, _name, _parent, _shift) \
+ GATE_INFRA1(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
-#define GATE_INFRA2(_id, _name, _parent, _shift) \
+#define GATE_INFRA2(_id, _name, _parent, _shift, _flags) \
{ \
.id = _id, .parent = _parent, .regs = &infra_2_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_INFRASYS, \
+ .flags = _flags, \
}
+#define GATE_INFRA2_INFRA(_id, _name, _parent, _shift) \
+ GATE_INFRA2(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_INFRASYS)
+#define GATE_INFRA2_TOP(_id, _name, _parent, _shift) \
+ GATE_INFRA2(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
/* INFRA GATE */
-static const struct mtk_gate infracfg_ao_gates[] = {
+static const struct mtk_gate infracfg_gates[] = {
/* INFRA0 */
- GATE_INFRA0(CK_INFRA_GPT_STA, "infra_gpt_sta", CK_INFRA_66M_MCK, 0),
- GATE_INFRA0(CK_INFRA_PWM_HCK, "infra_pwm_hck", CK_INFRA_66M_MCK, 1),
- GATE_INFRA0(CK_INFRA_PWM_STA, "infra_pwm_sta", CK_INFRA_PWM_BCK, 2),
- GATE_INFRA0(CK_INFRA_PWM1_CK, "infra_pwm1", CK_INFRA_PWM_CK1, 3),
- GATE_INFRA0(CK_INFRA_PWM2_CK, "infra_pwm2", CK_INFRA_PWM_CK2, 4),
- GATE_INFRA0(CK_INFRA_CQ_DMA_CK, "infra_cq_dma", CK_INFRA_133M_HCK, 6),
- GATE_INFRA0(CK_INFRA_EIP97_CK, "infra_eip97", CK_INFRA_EIP_CK, 7),
- GATE_INFRA0(CK_INFRA_AUD_BUS_CK, "infra_aud_bus", CK_INFRA_66M_PHCK, 8),
- GATE_INFRA0(CK_INFRA_AUD_26M_CK, "infra_aud_26m", CK_INFRA_CK_F26M, 9),
- GATE_INFRA0(CK_INFRA_AUD_L_CK, "infra_aud_l", CK_INFRA_FAUD_L_CK, 10),
- GATE_INFRA0(CK_INFRA_AUD_AUD_CK, "infra_aud_aud", CK_INFRA_FAUD_AUD_CK,
- 11),
- GATE_INFRA0(CK_INFRA_AUD_EG2_CK, "infra_aud_eg2", CK_INFRA_FAUD_EG2_CK,
- 13),
- GATE_INFRA0(CK_INFRA_DRAMC_26M_CK, "infra_dramc_26m", CK_INFRA_CK_F26M,
- 14),
- GATE_INFRA0(CK_INFRA_DBG_CK, "infra_dbg", CK_INFRA_66M_MCK, 15),
- GATE_INFRA0(CK_INFRA_AP_DMA_CK, "infra_ap_dma", CK_INFRA_66M_MCK, 16),
- GATE_INFRA0(CK_INFRA_SEJ_CK, "infra_sej", CK_INFRA_66M_MCK, 24),
- GATE_INFRA0(CK_INFRA_SEJ_13M_CK, "infra_sej_13m", CK_INFRA_CK_F26M, 25),
- GATE_INFRA0(CK_INFRA_TRNG_CK, "infra_trng", CK_INFRA_HD_133M, 26),
+ GATE_INFRA0_INFRA(CLK_INFRA_GPT_STA, "infra_gpt_sta", CLK_INFRA_SYSAXI_D2, 0),
+ GATE_INFRA0_INFRA(CLK_INFRA_PWM_HCK, "infra_pwm_hck", CLK_INFRA_SYSAXI_D2, 1),
+ GATE_INFRA0_INFRA(CLK_INFRA_PWM_STA, "infra_pwm_sta", CLK_INFRA_PWM_BSEL, 2),
+ GATE_INFRA0_INFRA(CLK_INFRA_PWM1_CK, "infra_pwm1", CLK_INFRA_PWM1_SEL, 3),
+ GATE_INFRA0_INFRA(CLK_INFRA_PWM2_CK, "infra_pwm2", CLK_INFRA_PWM2_SEL, 4),
+ GATE_INFRA0_TOP(CLK_INFRA_CQ_DMA_CK, "infra_cq_dma", CLK_TOP_SYSAXI_SEL, 6),
+ GATE_INFRA0_TOP(CLK_INFRA_EIP97_CK, "infra_eip97", CLK_TOP_EIP_B_SEL, 7),
+ GATE_INFRA0_TOP(CLK_INFRA_AUD_BUS_CK, "infra_aud_bus", CLK_TOP_SYSAXI_SEL, 8),
+ GATE_INFRA0_TOP(CLK_INFRA_AUD_26M_CK, "infra_aud_26m", CLK_TOP_F26M_SEL, 9),
+ GATE_INFRA0_TOP(CLK_INFRA_AUD_L_CK, "infra_aud_l", CLK_TOP_AUD_L_SEL, 10),
+ GATE_INFRA0_TOP(CLK_INFRA_AUD_AUD_CK, "infra_aud_aud", CLK_TOP_A1SYS_SEL,
+ 11),
+ GATE_INFRA0_TOP(CLK_INFRA_AUD_EG2_CK, "infra_aud_eg2", CLK_TOP_A_TUNER_SEL,
+ 13),
+ GATE_INFRA0_TOP(CLK_INFRA_DRAMC_26M_CK, "infra_dramc_26m", CLK_TOP_F26M_SEL,
+ 14),
+ GATE_INFRA0_INFRA(CLK_INFRA_DBG_CK, "infra_dbg", CLK_INFRA_SYSAXI_D2, 15),
+ GATE_INFRA0_INFRA(CLK_INFRA_AP_DMA_CK, "infra_ap_dma", CLK_INFRA_SYSAXI_D2, 16),
+ GATE_INFRA0_INFRA(CLK_INFRA_SEJ_CK, "infra_sej", CLK_INFRA_SYSAXI_D2, 24),
+ GATE_INFRA0_TOP(CLK_INFRA_SEJ_13M_CK, "infra_sej_13m", CLK_TOP_F26M_SEL, 25),
/* INFRA1 */
- GATE_INFRA1(CK_INFRA_THERM_CK, "infra_therm", CK_INFRA_CK_F26M, 0),
- GATE_INFRA1(CK_INFRA_I2CO_CK, "infra_i2co", CK_INFRA_I2CS_CK, 1),
- GATE_INFRA1(CK_INFRA_UART0_CK, "infra_uart0", CK_INFRA_MUX_UART0, 2),
- GATE_INFRA1(CK_INFRA_UART1_CK, "infra_uart1", CK_INFRA_MUX_UART1, 3),
- GATE_INFRA1(CK_INFRA_UART2_CK, "infra_uart2", CK_INFRA_MUX_UART2, 4),
- GATE_INFRA1(CK_INFRA_NFI1_CK, "infra_nfi1", CK_INFRA_NFI_CK, 8),
- GATE_INFRA1(CK_INFRA_SPINFI1_CK, "infra_spinfi1", CK_INFRA_SPINFI_CK,
- 9),
- GATE_INFRA1(CK_INFRA_NFI_HCK_CK, "infra_nfi_hck", CK_INFRA_66M_MCK, 10),
- GATE_INFRA1(CK_INFRA_SPI0_CK, "infra_spi0", CK_INFRA_MUX_SPI0, 11),
- GATE_INFRA1(CK_INFRA_SPI1_CK, "infra_spi1", CK_INFRA_MUX_SPI1, 12),
- GATE_INFRA1(CK_INFRA_SPI0_HCK_CK, "infra_spi0_hck", CK_INFRA_66M_MCK,
- 13),
- GATE_INFRA1(CK_INFRA_SPI1_HCK_CK, "infra_spi1_hck", CK_INFRA_66M_MCK,
- 14),
- GATE_INFRA1(CK_INFRA_FRTC_CK, "infra_frtc", CK_INFRA_RTC_32K, 15),
- GATE_INFRA1(CK_INFRA_MSDC_CK, "infra_msdc", CK_INFRA_FMSDC_CK, 16),
- GATE_INFRA1(CK_INFRA_MSDC_HCK_CK, "infra_msdc_hck",
- CK_INFRA_FMSDC_HCK_CK, 17),
- GATE_INFRA1(CK_INFRA_MSDC_133M_CK, "infra_msdc_133m",
- CK_INFRA_PERI_133M, 18),
- GATE_INFRA1(CK_INFRA_MSDC_66M_CK, "infra_msdc_66m", CK_INFRA_66M_PHCK,
- 19),
- GATE_INFRA1(CK_INFRA_ADC_26M_CK, "infra_adc_26m", CK_INFRA_CK_F26M, 20),
- GATE_INFRA1(CK_INFRA_ADC_FRC_CK, "infra_adc_frc", CK_INFRA_CK_F26M, 21),
- GATE_INFRA1(CK_INFRA_FBIST2FPC_CK, "infra_fbist2fpc", CK_INFRA_NFI_CK,
- 23),
+ GATE_INFRA1_TOP(CLK_INFRA_THERM_CK, "infra_therm", CLK_TOP_F26M_SEL, 0),
+ GATE_INFRA1_TOP(CLK_INFRA_I2C0_CK, "infra_i2co", CLK_TOP_I2C_SEL, 1),
+ GATE_INFRA1_INFRA(CLK_INFRA_UART0_CK, "infra_uart0", CLK_INFRA_UART0_SEL, 2),
+ GATE_INFRA1_INFRA(CLK_INFRA_UART1_CK, "infra_uart1", CLK_INFRA_UART1_SEL, 3),
+ GATE_INFRA1_INFRA(CLK_INFRA_UART2_CK, "infra_uart2", CLK_INFRA_UART2_SEL, 4),
+ GATE_INFRA1_TOP(CLK_INFRA_NFI1_CK, "infra_nfi1", CLK_TOP_NFI1X_SEL, 8),
+ GATE_INFRA1_TOP(CLK_INFRA_SPINFI1_CK, "infra_spinfi1", CLK_TOP_SPINFI_SEL,
+ 9),
+ GATE_INFRA1_INFRA(CLK_INFRA_NFI_HCK_CK, "infra_nfi_hck", CLK_INFRA_SYSAXI_D2, 10),
+ GATE_INFRA1_INFRA(CLK_INFRA_SPI0_CK, "infra_spi0", CLK_INFRA_SPI0_SEL, 11),
+ GATE_INFRA1_INFRA(CLK_INFRA_SPI1_CK, "infra_spi1", CLK_INFRA_SPI1_SEL, 12),
+ GATE_INFRA1_INFRA(CLK_INFRA_SPI0_HCK_CK, "infra_spi0_hck", CLK_INFRA_SYSAXI_D2,
+ 13),
+ GATE_INFRA1_INFRA(CLK_INFRA_SPI1_HCK_CK, "infra_spi1_hck", CLK_INFRA_SYSAXI_D2,
+ 14),
+ GATE_INFRA1_TOP(CLK_INFRA_FRTC_CK, "infra_frtc", CLK_TOP_RTC_32K, 15),
+ GATE_INFRA1_TOP(CLK_INFRA_MSDC_CK, "infra_msdc", CLK_TOP_EMMC_416M_SEL, 16),
+ GATE_INFRA1_TOP(CLK_INFRA_MSDC_HCK_CK, "infra_msdc_hck",
+ CLK_TOP_EMMC_250M_SEL, 17),
+ GATE_INFRA1_TOP(CLK_INFRA_MSDC_133M_CK, "infra_msdc_133m",
+ CLK_TOP_SYSAXI_SEL, 18),
+ GATE_INFRA1_INFRA(CLK_INFRA_MSDC_66M_CK, "infra_msdc_66m", CLK_INFRA_SYSAXI_D2,
+ 19),
+ GATE_INFRA1_INFRA(CLK_INFRA_ADC_26M_CK, "infra_adc_26m", CLK_INFRA_ADC_FRC_CK, 20),
+ GATE_INFRA1_TOP(CLK_INFRA_ADC_FRC_CK, "infra_adc_frc", CLK_TOP_F26M_SEL, 21),
+ GATE_INFRA1_TOP(CLK_INFRA_FBIST2FPC_CK, "infra_fbist2fpc", CLK_TOP_NFI1X_SEL,
+ 23),
/* INFRA2 */
- GATE_INFRA2(CK_INFRA_IUSB_133_CK, "infra_iusb_133", CK_INFRA_133M_PHCK,
- 0),
- GATE_INFRA2(CK_INFRA_IUSB_66M_CK, "infra_iusb_66m", CK_INFRA_66M_PHCK,
- 1),
- GATE_INFRA2(CK_INFRA_IUSB_SYS_CK, "infra_iusb_sys", CK_INFRA_USB_SYS_CK,
- 2),
- GATE_INFRA2(CK_INFRA_IUSB_CK, "infra_iusb", CK_INFRA_USB_CK, 3),
- GATE_INFRA2(CK_INFRA_IPCIE_CK, "infra_ipcie", CK_INFRA_PCIE_CK, 13),
- GATE_INFRA2(CK_INFRA_IPCIER_CK, "infra_ipcier", CK_INFRA_F26M_CK0, 15),
- GATE_INFRA2(CK_INFRA_IPCIEB_CK, "infra_ipcieb", CK_INFRA_133M_PHCK, 15),
+ GATE_INFRA2_TOP(CLK_INFRA_IUSB_133_CK, "infra_iusb_133", CLK_TOP_SYSAXI_SEL,
+ 0),
+ GATE_INFRA2_INFRA(CLK_INFRA_IUSB_66M_CK, "infra_iusb_66m", CLK_INFRA_SYSAXI_D2,
+ 1),
+ GATE_INFRA2_TOP(CLK_INFRA_IUSB_SYS_CK, "infra_iusb_sys", CLK_TOP_U2U3_SYS_SEL,
+ 2),
+ GATE_INFRA2_TOP(CLK_INFRA_IUSB_CK, "infra_iusb", CLK_TOP_U2U3_SEL, 3),
+ GATE_INFRA2_TOP(CLK_INFRA_IPCIE_CK, "infra_ipcie", CLK_TOP_PEXTP_TL_SEL, 12),
+ GATE_INFRA2_TOP(CLK_INFRA_IPCIE_PIPE_CK, "infra_ipcie_pipe", CLK_TOP_XTAL, 13),
+ GATE_INFRA2_TOP(CLK_INFRA_IPCIER_CK, "infra_ipcier", CLK_TOP_F26M_SEL, 14),
+ GATE_INFRA2_TOP(CLK_INFRA_IPCIEB_CK, "infra_ipcieb", CLK_TOP_SYSAXI_SEL, 15),
+ /* upstream linux unordered */
+ GATE_INFRA0_TOP(CLK_INFRA_TRNG_CK, "infra_trng", CLK_TOP_SYSAXI_SEL, 26),
};
static const struct mtk_clk_tree mt7986_fixed_pll_clk_tree = {
.fdivs_offs = CLK_APMIXED_NR_CLK,
.xtal_rate = 40 * MHZ,
.fclks = fixed_pll_clks,
+ .flags = CLK_APMIXED,
};
static const struct mtk_clk_tree mt7986_topckgen_clk_tree = {
- .fdivs_offs = CK_TOP_CB_M_416M,
- .muxes_offs = CK_TOP_NFI1X_SEL,
+ .fdivs_offs = CLK_TOP_XTAL_D2,
+ .muxes_offs = CLK_TOP_NFI1X_SEL,
.fclks = top_fixed_clks,
.fdivs = top_fixed_divs,
.muxes = top_muxes,
- .flags = CLK_BYPASS_XTAL,
+ .flags = CLK_BYPASS_XTAL | CLK_TOPCKGEN,
};
static const struct mtk_clk_tree mt7986_infracfg_clk_tree = {
- .fdivs_offs = CK_INFRA_CK_F26M,
- .muxes_offs = CK_INFRA_UART0_SEL,
+ .fdivs_offs = CLK_INFRA_SYSAXI_D2,
+ .muxes_offs = CLK_INFRA_UART0_SEL,
+ .gates_offs = CLK_INFRA_GPT_STA,
.fdivs = infra_fixed_divs,
.muxes = infra_muxes,
+ .gates = infracfg_gates,
+ .flags = CLK_INFRASYS,
};
static const struct udevice_id mt7986_fixed_pll_compat[] = {
@@ -582,22 +591,11 @@
{}
};
-static const struct udevice_id mt7986_infracfg_ao_compat[] = {
- { .compatible = "mediatek,mt7986-infracfg_ao" },
- {}
-};
-
static int mt7986_infracfg_probe(struct udevice *dev)
{
- return mtk_common_clk_init(dev, &mt7986_infracfg_clk_tree);
+ return mtk_common_clk_infrasys_init(dev, &mt7986_infracfg_clk_tree);
}
-static int mt7986_infracfg_ao_probe(struct udevice *dev)
-{
- return mtk_common_clk_gate_init(dev, &mt7986_infracfg_clk_tree,
- infracfg_ao_gates);
-}
-
U_BOOT_DRIVER(mtk_clk_infracfg) = {
.name = "mt7986-clock-infracfg",
.id = UCLASS_CLK,
@@ -608,16 +606,6 @@
.flags = DM_FLAG_PRE_RELOC,
};
-U_BOOT_DRIVER(mtk_clk_infracfg_ao) = {
- .name = "mt7986-clock-infracfg-ao",
- .id = UCLASS_CLK,
- .of_match = mt7986_infracfg_ao_compat,
- .probe = mt7986_infracfg_ao_probe,
- .priv_auto = sizeof(struct mtk_cg_priv),
- .ops = &mtk_clk_gate_ops,
- .flags = DM_FLAG_PRE_RELOC,
-};
-
/* ethsys */
static const struct mtk_gate_regs eth_cg_regs = {
.sta_ofs = 0x30,
@@ -631,11 +619,11 @@
}
static const struct mtk_gate eth_cgs[] = {
- GATE_ETH(CK_ETH_FE_EN, "eth_fe_en", CK_TOP_NETSYS_2X, 7),
- GATE_ETH(CK_ETH_GP2_EN, "eth_gp2_en", CK_TOP_SGM_325M, 8),
- GATE_ETH(CK_ETH_GP1_EN, "eth_gp1_en", CK_TOP_SGM_325M, 8),
- GATE_ETH(CK_ETH_WOCPU1_EN, "eth_wocpu1_en", CK_TOP_NETSYS_WED_MCU, 14),
- GATE_ETH(CK_ETH_WOCPU0_EN, "eth_wocpu0_en", CK_TOP_NETSYS_WED_MCU, 15),
+ GATE_ETH(CLK_ETH_FE_EN, "eth_fe_en", CLK_TOP_NETSYS_2X_SEL, 7),
+ GATE_ETH(CLK_ETH_GP2_EN, "eth_gp2_en", CLK_TOP_SGM_325M_SEL, 8),
+ GATE_ETH(CLK_ETH_GP1_EN, "eth_gp1_en", CLK_TOP_SGM_325M_SEL, 8),
+ GATE_ETH(CLK_ETH_WOCPU1_EN, "eth_wocpu1_en", CLK_TOP_NETSYS_MCU_SEL, 14),
+ GATE_ETH(CLK_ETH_WOCPU0_EN, "eth_wocpu0_en", CLK_TOP_NETSYS_MCU_SEL, 15),
};
static int mt7986_ethsys_probe(struct udevice *dev)
diff --git a/drivers/clk/mediatek/clk-mt7988.c b/drivers/clk/mediatek/clk-mt7988.c
index 32b0451..8f4e8f4 100644
--- a/drivers/clk/mediatek/clk-mt7988.c
+++ b/drivers/clk/mediatek/clk-mt7988.c
@@ -35,225 +35,243 @@
/* FIXED PLLS */
static const struct mtk_fixed_clk apmixedsys_mtk_plls[] = {
- FIXED_CLK(CK_APMIXED_NETSYSPLL, CLK_XTAL, 850000000),
- FIXED_CLK(CK_APMIXED_MPLL, CLK_XTAL, 416000000),
- FIXED_CLK(CK_APMIXED_MMPLL, CLK_XTAL, 720000000),
- FIXED_CLK(CK_APMIXED_APLL2, CLK_XTAL, 196608000),
- FIXED_CLK(CK_APMIXED_NET1PLL, CLK_XTAL, 2500000000),
- FIXED_CLK(CK_APMIXED_NET2PLL, CLK_XTAL, 800000000),
- FIXED_CLK(CK_APMIXED_WEDMCUPLL, CLK_XTAL, 208000000),
- FIXED_CLK(CK_APMIXED_SGMPLL, CLK_XTAL, 325000000),
- FIXED_CLK(CK_APMIXED_ARM_B, CLK_XTAL, 1500000000),
- FIXED_CLK(CK_APMIXED_CCIPLL2_B, CLK_XTAL, 960000000),
- FIXED_CLK(CK_APMIXED_USXGMIIPLL, CLK_XTAL, 644533000),
- FIXED_CLK(CK_APMIXED_MSDCPLL, CLK_XTAL, 400000000),
+ FIXED_CLK(CLK_APMIXED_NETSYSPLL, CLK_XTAL, 850000000),
+ FIXED_CLK(CLK_APMIXED_MPLL, CLK_XTAL, 416000000),
+ FIXED_CLK(CLK_APMIXED_MMPLL, CLK_XTAL, 720000000),
+ FIXED_CLK(CLK_APMIXED_APLL2, CLK_XTAL, 196608000),
+ FIXED_CLK(CLK_APMIXED_NET1PLL, CLK_XTAL, 2500000000),
+ FIXED_CLK(CLK_APMIXED_NET2PLL, CLK_XTAL, 800000000),
+ FIXED_CLK(CLK_APMIXED_WEDMCUPLL, CLK_XTAL, 208000000),
+ FIXED_CLK(CLK_APMIXED_SGMPLL, CLK_XTAL, 325000000),
+ FIXED_CLK(CLK_APMIXED_ARM_B, CLK_XTAL, 1500000000),
+ FIXED_CLK(CLK_APMIXED_CCIPLL2_B, CLK_XTAL, 960000000),
+ FIXED_CLK(CLK_APMIXED_USXGMIIPLL, CLK_XTAL, 644533000),
+ FIXED_CLK(CLK_APMIXED_MSDCPLL, CLK_XTAL, 400000000),
};
+/* TOPCKGEN FIXED CLK */
+static const struct mtk_fixed_clk topckgen_mtk_fixed_clks[] = {
+ FIXED_CLK(CLK_TOP_XTAL, CLK_XTAL, 40000000),
+};
+
/* TOPCKGEN FIXED DIV */
static const struct mtk_fixed_factor topckgen_mtk_fixed_factors[] = {
- XTAL_FACTOR(CK_TOP_CB_CKSQ_40M, "cb_cksq_40m", CLK_XTAL, 1, 1),
- PLL_FACTOR(CK_TOP_CB_M_416M, "cb_m_416m", CK_APMIXED_MPLL, 1, 1),
- PLL_FACTOR(CK_TOP_CB_M_D2, "cb_m_d2", CK_APMIXED_MPLL, 1, 2),
- PLL_FACTOR(CK_TOP_M_D3_D2, "m_d3_d2", CK_APMIXED_MPLL, 1, 2),
- PLL_FACTOR(CK_TOP_CB_M_D4, "cb_m_d4", CK_APMIXED_MPLL, 1, 4),
- PLL_FACTOR(CK_TOP_CB_M_D8, "cb_m_d8", CK_APMIXED_MPLL, 1, 8),
- PLL_FACTOR(CK_TOP_M_D8_D2, "m_d8_d2", CK_APMIXED_MPLL, 1, 16),
- PLL_FACTOR(CK_TOP_CB_MM_720M, "cb_mm_720m", CK_APMIXED_MMPLL, 1, 1),
- PLL_FACTOR(CK_TOP_CB_MM_D2, "cb_mm_d2", CK_APMIXED_MMPLL, 1, 2),
- PLL_FACTOR(CK_TOP_CB_MM_D3_D5, "cb_mm_d3_d5", CK_APMIXED_MMPLL, 1, 15),
- PLL_FACTOR(CK_TOP_CB_MM_D4, "cb_mm_d4", CK_APMIXED_MMPLL, 1, 4),
- PLL_FACTOR(CK_TOP_MM_D6_D2, "mm_d6_d2", CK_APMIXED_MMPLL, 1, 12),
- PLL_FACTOR(CK_TOP_CB_MM_D8, "cb_mm_d8", CK_APMIXED_MMPLL, 1, 8),
- PLL_FACTOR(CK_TOP_CB_APLL2_196M, "cb_apll2_196m", CK_APMIXED_APLL2, 1,
- 1),
- PLL_FACTOR(CK_TOP_CB_APLL2_D4, "cb_apll2_d4", CK_APMIXED_APLL2, 1, 4),
- PLL_FACTOR(CK_TOP_CB_NET1_D4, "cb_net1_d4", CK_APMIXED_NET1PLL, 1, 4),
- PLL_FACTOR(CK_TOP_CB_NET1_D5, "cb_net1_d5", CK_APMIXED_NET1PLL, 1, 5),
- PLL_FACTOR(CK_TOP_NET1_D5_D2, "net1_d5_d2", CK_APMIXED_NET1PLL, 1, 10),
- PLL_FACTOR(CK_TOP_NET1_D5_D4, "net1_d5_d4", CK_APMIXED_NET1PLL, 1, 20),
- PLL_FACTOR(CK_TOP_CB_NET1_D8, "cb_net1_d8", CK_APMIXED_NET1PLL, 1, 8),
- PLL_FACTOR(CK_TOP_NET1_D8_D2, "net1_d8_d2", CK_APMIXED_NET1PLL, 1, 16),
- PLL_FACTOR(CK_TOP_NET1_D8_D4, "net1_d8_d4", CK_APMIXED_NET1PLL, 1, 32),
- PLL_FACTOR(CK_TOP_NET1_D8_D8, "net1_d8_d8", CK_APMIXED_NET1PLL, 1, 64),
- PLL_FACTOR(CK_TOP_NET1_D8_D16, "net1_d8_d16", CK_APMIXED_NET1PLL, 1,
- 128),
- PLL_FACTOR(CK_TOP_CB_NET2_800M, "cb_net2_800m", CK_APMIXED_NET2PLL, 1,
- 1),
- PLL_FACTOR(CK_TOP_CB_NET2_D2, "cb_net2_d2", CK_APMIXED_NET2PLL, 1, 2),
- PLL_FACTOR(CK_TOP_CB_NET2_D4, "cb_net2_d4", CK_APMIXED_NET2PLL, 1, 4),
- PLL_FACTOR(CK_TOP_NET2_D4_D4, "net2_d4_d4", CK_APMIXED_NET2PLL, 1, 16),
- PLL_FACTOR(CK_TOP_NET2_D4_D8, "net2_d4_d8", CK_APMIXED_NET2PLL, 1, 32),
- PLL_FACTOR(CK_TOP_CB_NET2_D6, "cb_net2_d6", CK_APMIXED_NET2PLL, 1, 6),
- PLL_FACTOR(CK_TOP_CB_NET2_D8, "cb_net2_d8", CK_APMIXED_NET2PLL, 1, 8),
- PLL_FACTOR(CK_TOP_CB_WEDMCU_208M, "cb_wedmcu_208m",
- CK_APMIXED_WEDMCUPLL, 1, 1),
- PLL_FACTOR(CK_TOP_CB_SGM_325M, "cb_sgm_325m", CK_APMIXED_SGMPLL, 1, 1),
- PLL_FACTOR(CK_TOP_CB_NETSYS_850M, "cb_netsys_850m",
- CK_APMIXED_NETSYSPLL, 1, 1),
- PLL_FACTOR(CK_TOP_CB_MSDC_400M, "cb_msdc_400m", CK_APMIXED_MSDCPLL, 1,
- 1),
- TOP_FACTOR(CK_TOP_CKSQ_40M_D2, "cksq_40m_d2", CK_TOP_CB_CKSQ_40M, 1, 2),
- TOP_FACTOR(CK_TOP_CB_RTC_32K, "cb_rtc_32k", CK_TOP_CB_CKSQ_40M, 1,
+ TOP_FACTOR(CLK_TOP_XTAL_D2, "xtal_d2", CLK_TOP_XTAL, 1, 2),
+ TOP_FACTOR(CLK_TOP_RTC_32K, "rtc_32k", CLK_TOP_XTAL, 1,
1250),
- TOP_FACTOR(CK_TOP_CB_RTC_32P7K, "cb_rtc_32p7k", CK_TOP_CB_CKSQ_40M, 1,
+ TOP_FACTOR(CLK_TOP_RTC_32P7K, "rtc_32p7k", CLK_TOP_XTAL, 1,
1220),
- TOP_FACTOR(CK_TOP_INFRA_F32K, "csw_infra_f32k", CK_TOP_CB_RTC_32P7K, 1,
- 1),
- XTAL_FACTOR(CK_TOP_CKSQ_SRC, "cksq_src", CLK_XTAL, 1, 1),
- TOP_FACTOR(CK_TOP_NETSYS_2X, "netsys_2x", CK_TOP_NETSYS_2X_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_NETSYS_GSW, "netsys_gsw", CK_TOP_NETSYS_GSW_SEL, 1,
- 1),
- TOP_FACTOR(CK_TOP_NETSYS_WED_MCU, "netsys_wed_mcu",
- CK_TOP_NETSYS_MCU_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_EIP197, "eip197", CK_TOP_EIP197_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_EMMC_250M, "emmc_250m", CK_TOP_EMMC_250M_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_EMMC_400M, "emmc_400m", CK_TOP_EMMC_400M_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_SPI, "spi", CK_TOP_SPI_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_SPIM_MST, "spim_mst", CK_TOP_SPIM_MST_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_NFI1X, "nfi1x", CK_TOP_NFI1X_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_SPINFI_BCK, "spinfi_bck", CK_TOP_SPINFI_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_I2C_BCK, "i2c_bck", CK_TOP_I2C_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_USB_SYS, "usb_sys", CK_TOP_USB_SYS_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_USB_SYS_P1, "usb_sys_p1", CK_TOP_USB_SYS_P1_SEL, 1,
- 1),
- TOP_FACTOR(CK_TOP_USB_XHCI, "usb_xhci", CK_TOP_USB_XHCI_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_USB_XHCI_P1, "usb_xhci_p1", CK_TOP_USB_XHCI_P1_SEL, 1,
- 1),
- TOP_FACTOR(CK_TOP_USB_FRMCNT, "usb_frmcnt", CK_TOP_USB_FRMCNT_SEL, 1,
- 1),
- TOP_FACTOR(CK_TOP_USB_FRMCNT_P1, "usb_frmcnt_p1",
- CK_TOP_USB_FRMCNT_P1_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_AUD, "aud", CK_TOP_AUD_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_A1SYS, "a1sys", CK_TOP_A1SYS_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_AUD_L, "aud_l", CK_TOP_AUD_L_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_A_TUNER, "a_tuner", CK_TOP_A_TUNER_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_SYSAXI, "sysaxi", CK_TOP_SYSAXI_SEL, 1, 1),
- TOP_FACTOR(CK_TOP_INFRA_F26M, "csw_infra_f26m", CK_TOP_INFRA_F26M_SEL,
- 1, 1),
- TOP_FACTOR(CK_TOP_USB_REF, "usb_ref", CK_TOP_CKSQ_SRC, 1, 1),
- TOP_FACTOR(CK_TOP_USB_CK_P1, "usb_ck_p1", CK_TOP_CKSQ_SRC, 1, 1),
+ PLL_FACTOR(CLK_TOP_MPLL_D2, "mpll_d2", CLK_APMIXED_MPLL, 1, 2),
+ PLL_FACTOR(CLK_TOP_MPLL_D3_D2, "mpll_d3_d2", CLK_APMIXED_MPLL, 1, 2),
+ PLL_FACTOR(CLK_TOP_MPLL_D4, "mpll_d4", CLK_APMIXED_MPLL, 1, 4),
+ PLL_FACTOR(CLK_TOP_MPLL_D8, "mpll_d8", CLK_APMIXED_MPLL, 1, 8),
+ PLL_FACTOR(CLK_TOP_MPLL_D8_D2, "mpll_d8_d2", CLK_APMIXED_MPLL, 1, 16),
+ PLL_FACTOR(CLK_TOP_MMPLL_D2, "mmpll_d2", CLK_APMIXED_MMPLL, 1, 2),
+ PLL_FACTOR(CLK_TOP_MMPLL_D3_D5, "mmpll_d3_d5", CLK_APMIXED_MMPLL, 1, 15),
+ PLL_FACTOR(CLK_TOP_MMPLL_D4, "mmpll_d4", CLK_APMIXED_MMPLL, 1, 4),
+ PLL_FACTOR(CLK_TOP_MMPLL_D6_D2, "mmpll_d6_d2", CLK_APMIXED_MMPLL, 1, 12),
+ PLL_FACTOR(CLK_TOP_MMPLL_D8, "mmpll_d8", CLK_APMIXED_MMPLL, 1, 8),
+ PLL_FACTOR(CLK_TOP_APLL2_D4, "apll2_d4", CLK_APMIXED_APLL2, 1, 4),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D4, "net1pll_d4", CLK_APMIXED_NET1PLL, 1, 4),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D5, "net1pll_d5", CLK_APMIXED_NET1PLL, 1, 5),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D5_D2, "net1pll_d5_d2", CLK_APMIXED_NET1PLL, 1, 10),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D5_D4, "net1pll_d5_d4", CLK_APMIXED_NET1PLL, 1, 20),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D8, "net1pll_d8", CLK_APMIXED_NET1PLL, 1, 8),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D8_D2, "net1pll_d8_d2", CLK_APMIXED_NET1PLL, 1, 16),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D8_D4, "net1pll_d8_d4", CLK_APMIXED_NET1PLL, 1, 32),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D8_D8, "net1pll_d8_d8", CLK_APMIXED_NET1PLL, 1, 64),
+ PLL_FACTOR(CLK_TOP_NET1PLL_D8_D16, "net1pll_d8_d16", CLK_APMIXED_NET1PLL, 1,
+ 128),
+ PLL_FACTOR(CLK_TOP_NET2PLL_D2, "net2pll_d2", CLK_APMIXED_NET2PLL, 1, 2),
+ PLL_FACTOR(CLK_TOP_NET2PLL_D4, "net2pll_d4", CLK_APMIXED_NET2PLL, 1, 4),
+ PLL_FACTOR(CLK_TOP_NET2PLL_D4_D4, "net2pll_d4_d4", CLK_APMIXED_NET2PLL, 1, 16),
+ PLL_FACTOR(CLK_TOP_NET2PLL_D4_D8, "net2pll_d4_d8", CLK_APMIXED_NET2PLL, 1, 32),
+ PLL_FACTOR(CLK_TOP_NET2PLL_D6, "net2pll_d6", CLK_APMIXED_NET2PLL, 1, 6),
+ PLL_FACTOR(CLK_TOP_NET2PLL_D8, "net2pll_d8", CLK_APMIXED_NET2PLL, 1, 8),
};
/* TOPCKGEN MUX PARENTS */
-static const int netsys_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_NET2_D2,
- CK_TOP_CB_MM_D2 };
+#define APMIXED_PARENT(_id) PARENT(_id, CLK_PARENT_APMIXED)
+#define TOP_PARENT(_id) PARENT(_id, CLK_PARENT_TOPCKGEN)
-static const int netsys_500m_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET1_D5,
- CK_TOP_NET1_D5_D2 };
+static const struct mtk_parent netsys_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET2PLL_D2),
+ TOP_PARENT(CLK_TOP_MMPLL_D2),
+};
-static const int netsys_2x_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET2_800M,
- CK_TOP_CB_MM_720M };
+static const struct mtk_parent netsys_500m_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D5),
+ TOP_PARENT(CLK_TOP_NET1PLL_D5_D2),
+};
-static const int netsys_gsw_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_NET1_D4,
- CK_TOP_CB_NET1_D5 };
+static const struct mtk_parent netsys_2x_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_NET2PLL),
+ APMIXED_PARENT(CLK_APMIXED_MMPLL),
+};
-static const int eth_gmii_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D5_D4 };
+static const struct mtk_parent netsys_gsw_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D4),
+ TOP_PARENT(CLK_TOP_NET1PLL_D5),
+};
-static const int netsys_mcu_parents[] = {
- CK_TOP_CB_CKSQ_40M, CK_TOP_CB_NET2_800M, CK_TOP_CB_MM_720M,
- CK_TOP_CB_NET1_D4, CK_TOP_CB_NET1_D5, CK_TOP_CB_M_416M
+static const struct mtk_parent eth_gmii_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D5_D4),
};
-static const int eip197_parents[] = {
- CK_TOP_CB_CKSQ_40M, CK_TOP_CB_NETSYS_850M, CK_TOP_CB_NET2_800M,
- CK_TOP_CB_MM_720M, CK_TOP_CB_NET1_D4, CK_TOP_CB_NET1_D5
+static const struct mtk_parent netsys_mcu_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_NET2PLL),
+ APMIXED_PARENT(CLK_APMIXED_MMPLL), TOP_PARENT(CLK_TOP_NET1PLL_D4),
+ TOP_PARENT(CLK_TOP_NET1PLL_D5), APMIXED_PARENT(CLK_APMIXED_MPLL),
};
-static const int axi_infra_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_NET1_D8_D2 };
+static const struct mtk_parent eip197_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_NETSYSPLL),
+ APMIXED_PARENT(CLK_APMIXED_NET2PLL), APMIXED_PARENT(CLK_APMIXED_MMPLL),
+ TOP_PARENT(CLK_TOP_NET1PLL_D4), TOP_PARENT(CLK_TOP_NET1PLL_D5),
+};
-static const int uart_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_M_D8,
- CK_TOP_M_D8_D2 };
+static const struct mtk_parent axi_infra_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D8_D2),
+};
-static const int emmc_250m_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D5_D2,
- CK_TOP_CB_MM_D4 };
+static const struct mtk_parent uart_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MPLL_D8),
+ TOP_PARENT(CLK_TOP_MPLL_D8_D2),
+};
-static const int emmc_400m_parents[] = {
- CK_TOP_CB_CKSQ_40M, CK_TOP_CB_MSDC_400M, CK_TOP_CB_MM_D2,
- CK_TOP_CB_M_D2, CK_TOP_CB_MM_D4, CK_TOP_NET1_D8_D2
+static const struct mtk_parent emmc_250m_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D5_D2),
+ TOP_PARENT(CLK_TOP_MMPLL_D4),
};
-static const int spi_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_M_D2,
- CK_TOP_CB_MM_D4, CK_TOP_NET1_D8_D2,
- CK_TOP_CB_NET2_D6, CK_TOP_NET1_D5_D4,
- CK_TOP_CB_M_D4, CK_TOP_NET1_D8_D4 };
+static const struct mtk_parent emmc_400m_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_MSDCPLL),
+ TOP_PARENT(CLK_TOP_MMPLL_D2), TOP_PARENT(CLK_TOP_MPLL_D2),
+ TOP_PARENT(CLK_TOP_MMPLL_D4), TOP_PARENT(CLK_TOP_NET1PLL_D8_D2),
+};
-static const int nfi1x_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_MM_D4,
- CK_TOP_NET1_D8_D2, CK_TOP_CB_NET2_D6,
- CK_TOP_CB_M_D4, CK_TOP_CB_MM_D8,
- CK_TOP_NET1_D8_D4, CK_TOP_CB_M_D8 };
+static const struct mtk_parent spi_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MPLL_D2),
+ TOP_PARENT(CLK_TOP_MMPLL_D4), TOP_PARENT(CLK_TOP_NET1PLL_D8_D2),
+ TOP_PARENT(CLK_TOP_NET2PLL_D6), TOP_PARENT(CLK_TOP_NET1PLL_D5_D4),
+ TOP_PARENT(CLK_TOP_MPLL_D4), TOP_PARENT(CLK_TOP_NET1PLL_D8_D4),
+};
-static const int spinfi_parents[] = { CK_TOP_CKSQ_40M_D2, CK_TOP_CB_CKSQ_40M,
- CK_TOP_NET1_D5_D4, CK_TOP_CB_M_D4,
- CK_TOP_CB_MM_D8, CK_TOP_NET1_D8_D4,
- CK_TOP_MM_D6_D2, CK_TOP_CB_M_D8 };
+static const struct mtk_parent nfi1x_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MMPLL_D4),
+ TOP_PARENT(CLK_TOP_NET1PLL_D8_D2), TOP_PARENT(CLK_TOP_NET2PLL_D6),
+ TOP_PARENT(CLK_TOP_MPLL_D4), TOP_PARENT(CLK_TOP_MMPLL_D8),
+ TOP_PARENT(CLK_TOP_NET1PLL_D8_D4), TOP_PARENT(CLK_TOP_MPLL_D8),
+};
-static const int pwm_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D8_D2,
- CK_TOP_NET1_D5_D4, CK_TOP_CB_M_D4,
- CK_TOP_M_D8_D2, CK_TOP_CB_RTC_32K };
+static const struct mtk_parent spinfi_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL_D2), TOP_PARENT(CLK_TOP_XTAL),
+ TOP_PARENT(CLK_TOP_NET1PLL_D5_D4), TOP_PARENT(CLK_TOP_MPLL_D4),
+ TOP_PARENT(CLK_TOP_MMPLL_D8), TOP_PARENT(CLK_TOP_NET1PLL_D8_D4),
+ TOP_PARENT(CLK_TOP_MMPLL_D6_D2), TOP_PARENT(CLK_TOP_MPLL_D8),
+};
-static const int i2c_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_NET1_D5_D4,
- CK_TOP_CB_M_D4, CK_TOP_NET1_D8_D4 };
+static const struct mtk_parent pwm_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D8_D2),
+ TOP_PARENT(CLK_TOP_NET1PLL_D5_D4), TOP_PARENT(CLK_TOP_MPLL_D4),
+ TOP_PARENT(CLK_TOP_MPLL_D8_D2), TOP_PARENT(CLK_TOP_RTC_32K),
+};
-static const int pcie_mbist_250m_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_NET1_D5_D2 };
+static const struct mtk_parent i2c_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D5_D4),
+ TOP_PARENT(CLK_TOP_MPLL_D4), TOP_PARENT(CLK_TOP_NET1PLL_D8_D4),
+};
-static const int pextp_tl_ck_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET2_D6, CK_TOP_CB_MM_D8,
- CK_TOP_M_D8_D2, CK_TOP_CB_RTC_32K };
+static const struct mtk_parent pcie_mbist_250m_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D5_D2),
+};
-static const int usb_frmcnt_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_MM_D3_D5 };
+static const struct mtk_parent pextp_tl_ck_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET2PLL_D6),
+ TOP_PARENT(CLK_TOP_MMPLL_D8), TOP_PARENT(CLK_TOP_MPLL_D8_D2),
+ TOP_PARENT(CLK_TOP_RTC_32K),
+};
-static const int aud_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_APLL2_196M };
+static const struct mtk_parent usb_frmcnt_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MMPLL_D3_D5),
+};
-static const int a1sys_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_APLL2_D4 };
+static const struct mtk_parent aud_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_APLL2),
+};
-static const int aud_l_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_APLL2_196M,
- CK_TOP_M_D8_D2 };
+static const struct mtk_parent a1sys_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_APLL2_D4),
+};
+
+static const struct mtk_parent aud_l_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_APLL2),
+ TOP_PARENT(CLK_TOP_MPLL_D8_D2),
+};
-static const int sspxtp_parents[] = { CK_TOP_CKSQ_40M_D2, CK_TOP_M_D8_D2 };
+static const struct mtk_parent sspxtp_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL_D2), TOP_PARENT(CLK_TOP_MPLL_D8_D2),
+};
-static const int usxgmii_sbus_0_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_NET1_D8_D4 };
+static const struct mtk_parent usxgmii_sbus_0_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D8_D4),
+};
-static const int sgm_0_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_SGM_325M };
+static const struct mtk_parent sgm_0_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_SGMPLL),
+};
-static const int sysapb_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_M_D3_D2 };
+static const struct mtk_parent sysapb_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MPLL_D3_D2),
+};
-static const int eth_refck_50m_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_NET2_D4_D4 };
+static const struct mtk_parent eth_refck_50m_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET2PLL_D4_D4),
+};
-static const int eth_sys_200m_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET2_D4 };
+static const struct mtk_parent eth_sys_200m_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET2PLL_D4),
+};
-static const int eth_xgmii_parents[] = { CK_TOP_CKSQ_40M_D2, CK_TOP_NET1_D8_D8,
- CK_TOP_NET1_D8_D16 };
+static const struct mtk_parent eth_xgmii_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL_D2), TOP_PARENT(CLK_TOP_NET1PLL_D8_D8),
+ TOP_PARENT(CLK_TOP_NET1PLL_D8_D16),
+};
-static const int bus_tops_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_NET1_D5,
- CK_TOP_CB_NET2_D2 };
+static const struct mtk_parent bus_tops_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D5),
+ TOP_PARENT(CLK_TOP_NET2PLL_D2),
+};
-static const int npu_tops_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET2_800M };
+static const struct mtk_parent npu_tops_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_NET2PLL),
+};
-static const int dramc_md32_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_M_D2,
- CK_TOP_CB_WEDMCU_208M };
+static const struct mtk_parent dramc_md32_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_MPLL_D2),
+ APMIXED_PARENT(CLK_APMIXED_WEDMCUPLL),
+};
-static const int da_xtp_glb_p0_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET2_D8 };
+static const struct mtk_parent da_xtp_glb_p0_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET2PLL_D8),
+};
-static const int mcusys_backup_625m_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET1_D4 };
+static const struct mtk_parent mcusys_backup_625m_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET1PLL_D4),
+};
-static const int macsec_parents[] = { CK_TOP_CB_CKSQ_40M, CK_TOP_CB_SGM_325M,
- CK_TOP_CB_NET1_D8 };
+static const struct mtk_parent macsec_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), APMIXED_PARENT(CLK_APMIXED_SGMPLL),
+ TOP_PARENT(CLK_TOP_NET1PLL_D8),
+};
-static const int netsys_tops_400m_parents[] = { CK_TOP_CB_CKSQ_40M,
- CK_TOP_CB_NET2_D2 };
+static const struct mtk_parent netsys_tops_400m_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL), TOP_PARENT(CLK_TOP_NET2PLL_D2),
+};
-static const int eth_mii_parents[] = { CK_TOP_CKSQ_40M_D2, CK_TOP_NET2_D4_D8 };
+static const struct mtk_parent eth_mii_parents[] = {
+ TOP_PARENT(CLK_TOP_XTAL_D2), TOP_PARENT(CLK_TOP_NET2PLL_D4_D8),
+};
#define TOP_MUX(_id, _name, _parents, _mux_ofs, _mux_set_ofs, _mux_clr_ofs, \
_shift, _width, _gate, _upd_ofs, _upd) \
@@ -262,278 +280,204 @@
.mux_clr_reg = _mux_clr_ofs, .upd_reg = _upd_ofs, \
.upd_shift = _upd, .mux_shift = _shift, \
.mux_mask = BIT(_width) - 1, .gate_reg = _mux_ofs, \
- .gate_shift = _gate, .parent = _parents, \
+ .gate_shift = _gate, .parent_flags = _parents, \
.num_parents = ARRAY_SIZE(_parents), \
- .flags = CLK_MUX_SETCLR_UPD, \
+ .flags = CLK_MUX_SETCLR_UPD | CLK_PARENT_MIXED, \
}
/* TOPCKGEN MUX_GATE */
static const struct mtk_composite topckgen_mtk_muxes[] = {
- TOP_MUX(CK_TOP_NETSYS_SEL, "netsys_sel", netsys_parents, 0x0, 0x4, 0x8,
+ TOP_MUX(CLK_TOP_NETSYS_SEL, "netsys_sel", netsys_parents, 0x0, 0x4, 0x8,
0, 2, 7, 0x1c0, 0),
- TOP_MUX(CK_TOP_NETSYS_500M_SEL, "netsys_500m_sel", netsys_500m_parents,
+ TOP_MUX(CLK_TOP_NETSYS_500M_SEL, "netsys_500m_sel", netsys_500m_parents,
0x0, 0x4, 0x8, 8, 2, 15, 0x1c0, 1),
- TOP_MUX(CK_TOP_NETSYS_2X_SEL, "netsys_2x_sel", netsys_2x_parents, 0x0,
+ TOP_MUX(CLK_TOP_NETSYS_2X_SEL, "netsys_2x_sel", netsys_2x_parents, 0x0,
0x4, 0x8, 16, 2, 23, 0x1c0, 2),
- TOP_MUX(CK_TOP_NETSYS_GSW_SEL, "netsys_gsw_sel", netsys_gsw_parents,
+ TOP_MUX(CLK_TOP_NETSYS_GSW_SEL, "netsys_gsw_sel", netsys_gsw_parents,
0x0, 0x4, 0x8, 24, 2, 31, 0x1c0, 3),
- TOP_MUX(CK_TOP_ETH_GMII_SEL, "eth_gmii_sel", eth_gmii_parents, 0x10,
+ TOP_MUX(CLK_TOP_ETH_GMII_SEL, "eth_gmii_sel", eth_gmii_parents, 0x10,
0x14, 0x18, 0, 1, 7, 0x1c0, 4),
- TOP_MUX(CK_TOP_NETSYS_MCU_SEL, "netsys_mcu_sel", netsys_mcu_parents,
+ TOP_MUX(CLK_TOP_NETSYS_MCU_SEL, "netsys_mcu_sel", netsys_mcu_parents,
0x10, 0x14, 0x18, 8, 3, 15, 0x1c0, 5),
- TOP_MUX(CK_TOP_NETSYS_PAO_2X_SEL, "netsys_pao_2x_sel",
+ TOP_MUX(CLK_TOP_NETSYS_PAO_2X_SEL, "netsys_pao_2x_sel",
netsys_mcu_parents, 0x10, 0x14, 0x18, 16, 3, 23, 0x1c0, 6),
- TOP_MUX(CK_TOP_EIP197_SEL, "eip197_sel", eip197_parents, 0x10, 0x14,
+ TOP_MUX(CLK_TOP_EIP197_SEL, "eip197_sel", eip197_parents, 0x10, 0x14,
0x18, 24, 3, 31, 0x1c0, 7),
- TOP_MUX(CK_TOP_AXI_INFRA_SEL, "axi_infra_sel", axi_infra_parents, 0x20,
+ TOP_MUX(CLK_TOP_AXI_INFRA_SEL, "axi_infra_sel", axi_infra_parents, 0x20,
0x24, 0x28, 0, 1, 7, 0x1c0, 8),
- TOP_MUX(CK_TOP_UART_SEL, "uart_sel", uart_parents, 0x20, 0x24, 0x28, 8,
+ TOP_MUX(CLK_TOP_UART_SEL, "uart_sel", uart_parents, 0x20, 0x24, 0x28, 8,
2, 15, 0x1c0, 9),
- TOP_MUX(CK_TOP_EMMC_250M_SEL, "emmc_250m_sel", emmc_250m_parents, 0x20,
+ TOP_MUX(CLK_TOP_EMMC_250M_SEL, "emmc_250m_sel", emmc_250m_parents, 0x20,
0x24, 0x28, 16, 2, 23, 0x1c0, 10),
- TOP_MUX(CK_TOP_EMMC_400M_SEL, "emmc_400m_sel", emmc_400m_parents, 0x20,
+ TOP_MUX(CLK_TOP_EMMC_400M_SEL, "emmc_400m_sel", emmc_400m_parents, 0x20,
0x24, 0x28, 24, 3, 31, 0x1c0, 11),
- TOP_MUX(CK_TOP_SPI_SEL, "spi_sel", spi_parents, 0x30, 0x34, 0x38, 0, 3,
+ TOP_MUX(CLK_TOP_SPI_SEL, "spi_sel", spi_parents, 0x30, 0x34, 0x38, 0, 3,
7, 0x1c0, 12),
- TOP_MUX(CK_TOP_SPIM_MST_SEL, "spim_mst_sel", spi_parents, 0x30, 0x34,
+ TOP_MUX(CLK_TOP_SPIM_MST_SEL, "spim_mst_sel", spi_parents, 0x30, 0x34,
0x38, 8, 3, 15, 0x1c0, 13),
- TOP_MUX(CK_TOP_NFI1X_SEL, "nfi1x_sel", nfi1x_parents, 0x30, 0x34, 0x38,
+ TOP_MUX(CLK_TOP_NFI1X_SEL, "nfi1x_sel", nfi1x_parents, 0x30, 0x34, 0x38,
16, 3, 23, 0x1c0, 14),
- TOP_MUX(CK_TOP_SPINFI_SEL, "spinfi_sel", spinfi_parents, 0x30, 0x34,
+ TOP_MUX(CLK_TOP_SPINFI_SEL, "spinfi_sel", spinfi_parents, 0x30, 0x34,
0x38, 24, 3, 31, 0x1c0, 15),
- TOP_MUX(CK_TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x40, 0x44, 0x48, 0, 3,
+ TOP_MUX(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x40, 0x44, 0x48, 0, 3,
7, 0x1c0, 16),
- TOP_MUX(CK_TOP_I2C_SEL, "i2c_sel", i2c_parents, 0x40, 0x44, 0x48, 8, 2,
+ TOP_MUX(CLK_TOP_I2C_SEL, "i2c_sel", i2c_parents, 0x40, 0x44, 0x48, 8, 2,
15, 0x1c0, 17),
- TOP_MUX(CK_TOP_PCIE_MBIST_250M_SEL, "pcie_mbist_250m_sel",
+ TOP_MUX(CLK_TOP_PCIE_MBIST_250M_SEL, "pcie_mbist_250m_sel",
pcie_mbist_250m_parents, 0x40, 0x44, 0x48, 16, 1, 23, 0x1c0,
18),
- TOP_MUX(CK_TOP_PEXTP_TL_SEL, "pextp_tl_ck_sel", pextp_tl_ck_parents,
+ TOP_MUX(CLK_TOP_PEXTP_TL_SEL, "pextp_tl_ck_sel", pextp_tl_ck_parents,
0x40, 0x44, 0x48, 24, 3, 31, 0x1c0, 19),
- TOP_MUX(CK_TOP_PEXTP_TL_P1_SEL, "pextp_tl_ck_p1_sel",
+ TOP_MUX(CLK_TOP_PEXTP_TL_P1_SEL, "pextp_tl_ck_p1_sel",
pextp_tl_ck_parents, 0x50, 0x54, 0x58, 0, 3, 7, 0x1c0, 20),
- TOP_MUX(CK_TOP_PEXTP_TL_P2_SEL, "pextp_tl_ck_p2_sel",
+ TOP_MUX(CLK_TOP_PEXTP_TL_P2_SEL, "pextp_tl_ck_p2_sel",
pextp_tl_ck_parents, 0x50, 0x54, 0x58, 8, 3, 15, 0x1c0, 21),
- TOP_MUX(CK_TOP_PEXTP_TL_P3_SEL, "pextp_tl_ck_p3_sel",
+ TOP_MUX(CLK_TOP_PEXTP_TL_P3_SEL, "pextp_tl_ck_p3_sel",
pextp_tl_ck_parents, 0x50, 0x54, 0x58, 16, 3, 23, 0x1c0, 22),
- TOP_MUX(CK_TOP_USB_SYS_SEL, "usb_sys_sel", eth_gmii_parents, 0x50, 0x54,
+ TOP_MUX(CLK_TOP_USB_SYS_SEL, "usb_sys_sel", eth_gmii_parents, 0x50, 0x54,
0x58, 24, 1, 31, 0x1c0, 23),
- TOP_MUX(CK_TOP_USB_SYS_P1_SEL, "usb_sys_p1_sel", eth_gmii_parents, 0x60,
+ TOP_MUX(CLK_TOP_USB_SYS_P1_SEL, "usb_sys_p1_sel", eth_gmii_parents, 0x60,
0x64, 0x68, 0, 1, 7, 0x1c0, 24),
- TOP_MUX(CK_TOP_USB_XHCI_SEL, "usb_xhci_sel", eth_gmii_parents, 0x60,
+ TOP_MUX(CLK_TOP_USB_XHCI_SEL, "usb_xhci_sel", eth_gmii_parents, 0x60,
0x64, 0x68, 8, 1, 15, 0x1c0, 25),
- TOP_MUX(CK_TOP_USB_XHCI_P1_SEL, "usb_xhci_p1_sel", eth_gmii_parents,
+ TOP_MUX(CLK_TOP_USB_XHCI_P1_SEL, "usb_xhci_p1_sel", eth_gmii_parents,
0x60, 0x64, 0x68, 16, 1, 23, 0x1c0, 26),
- TOP_MUX(CK_TOP_USB_FRMCNT_SEL, "usb_frmcnt_sel", usb_frmcnt_parents,
+ TOP_MUX(CLK_TOP_USB_FRMCNT_SEL, "usb_frmcnt_sel", usb_frmcnt_parents,
0x60, 0x64, 0x68, 24, 1, 31, 0x1c0, 27),
- TOP_MUX(CK_TOP_USB_FRMCNT_P1_SEL, "usb_frmcnt_p1_sel",
+ TOP_MUX(CLK_TOP_USB_FRMCNT_P1_SEL, "usb_frmcnt_p1_sel",
usb_frmcnt_parents, 0x70, 0x74, 0x78, 0, 1, 7, 0x1c0, 28),
- TOP_MUX(CK_TOP_AUD_SEL, "aud_sel", aud_parents, 0x70, 0x74, 0x78, 8, 1,
+ TOP_MUX(CLK_TOP_AUD_SEL, "aud_sel", aud_parents, 0x70, 0x74, 0x78, 8, 1,
15, 0x1c0, 29),
- TOP_MUX(CK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents, 0x70, 0x74, 0x78,
+ TOP_MUX(CLK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents, 0x70, 0x74, 0x78,
16, 1, 23, 0x1c0, 30),
- TOP_MUX(CK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents, 0x70, 0x74, 0x78,
+ TOP_MUX(CLK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents, 0x70, 0x74, 0x78,
24, 2, 31, 0x1c4, 0),
- TOP_MUX(CK_TOP_A_TUNER_SEL, "a_tuner_sel", a1sys_parents, 0x80, 0x84,
+ TOP_MUX(CLK_TOP_A_TUNER_SEL, "a_tuner_sel", a1sys_parents, 0x80, 0x84,
0x88, 0, 1, 7, 0x1c4, 1),
- TOP_MUX(CK_TOP_SSPXTP_SEL, "sspxtp_sel", sspxtp_parents, 0x80, 0x84,
+ TOP_MUX(CLK_TOP_SSPXTP_SEL, "sspxtp_sel", sspxtp_parents, 0x80, 0x84,
0x88, 8, 1, 15, 0x1c4, 2),
- TOP_MUX(CK_TOP_USB_PHY_SEL, "usb_phy_sel", sspxtp_parents, 0x80, 0x84,
+ TOP_MUX(CLK_TOP_USB_PHY_SEL, "usb_phy_sel", sspxtp_parents, 0x80, 0x84,
0x88, 16, 1, 23, 0x1c4, 3),
- TOP_MUX(CK_TOP_USXGMII_SBUS_0_SEL, "usxgmii_sbus_0_sel",
+ TOP_MUX(CLK_TOP_USXGMII_SBUS_0_SEL, "usxgmii_sbus_0_sel",
usxgmii_sbus_0_parents, 0x80, 0x84, 0x88, 24, 1, 31, 0x1c4, 4),
- TOP_MUX(CK_TOP_USXGMII_SBUS_1_SEL, "usxgmii_sbus_1_sel",
+ TOP_MUX(CLK_TOP_USXGMII_SBUS_1_SEL, "usxgmii_sbus_1_sel",
usxgmii_sbus_0_parents, 0x90, 0x94, 0x98, 0, 1, 7, 0x1c4, 5),
- TOP_MUX(CK_TOP_SGM_0_SEL, "sgm_0_sel", sgm_0_parents, 0x90, 0x94, 0x98,
+ TOP_MUX(CLK_TOP_SGM_0_SEL, "sgm_0_sel", sgm_0_parents, 0x90, 0x94, 0x98,
8, 1, 15, 0x1c4, 6),
- TOP_MUX(CK_TOP_SGM_SBUS_0_SEL, "sgm_sbus_0_sel", usxgmii_sbus_0_parents,
+ TOP_MUX(CLK_TOP_SGM_SBUS_0_SEL, "sgm_sbus_0_sel", usxgmii_sbus_0_parents,
0x90, 0x94, 0x98, 16, 1, 23, 0x1c4, 7),
- TOP_MUX(CK_TOP_SGM_1_SEL, "sgm_1_sel", sgm_0_parents, 0x90, 0x94, 0x98,
+ TOP_MUX(CLK_TOP_SGM_1_SEL, "sgm_1_sel", sgm_0_parents, 0x90, 0x94, 0x98,
24, 1, 31, 0x1c4, 8),
- TOP_MUX(CK_TOP_SGM_SBUS_1_SEL, "sgm_sbus_1_sel", usxgmii_sbus_0_parents,
+ TOP_MUX(CLK_TOP_SGM_SBUS_1_SEL, "sgm_sbus_1_sel", usxgmii_sbus_0_parents,
0xa0, 0xa4, 0xa8, 0, 1, 7, 0x1c4, 9),
- TOP_MUX(CK_TOP_XFI_PHY_0_XTAL_SEL, "xfi_phy_0_xtal_sel", sspxtp_parents,
+ TOP_MUX(CLK_TOP_XFI_PHY_0_XTAL_SEL, "xfi_phy_0_xtal_sel", sspxtp_parents,
0xa0, 0xa4, 0xa8, 8, 1, 15, 0x1c4, 10),
- TOP_MUX(CK_TOP_XFI_PHY_1_XTAL_SEL, "xfi_phy_1_xtal_sel", sspxtp_parents,
+ TOP_MUX(CLK_TOP_XFI_PHY_1_XTAL_SEL, "xfi_phy_1_xtal_sel", sspxtp_parents,
0xa0, 0xa4, 0xa8, 16, 1, 23, 0x1c4, 11),
- TOP_MUX(CK_TOP_SYSAXI_SEL, "sysaxi_sel", axi_infra_parents, 0xa0, 0xa4,
+ TOP_MUX(CLK_TOP_SYSAXI_SEL, "sysaxi_sel", axi_infra_parents, 0xa0, 0xa4,
0xa8, 24, 1, 31, 0x1c4, 12),
- TOP_MUX(CK_TOP_SYSAPB_SEL, "sysapb_sel", sysapb_parents, 0xb0, 0xb4,
+ TOP_MUX(CLK_TOP_SYSAPB_SEL, "sysapb_sel", sysapb_parents, 0xb0, 0xb4,
0xb8, 0, 1, 7, 0x1c4, 13),
- TOP_MUX(CK_TOP_ETH_REFCK_50M_SEL, "eth_refck_50m_sel",
+ TOP_MUX(CLK_TOP_ETH_REFCK_50M_SEL, "eth_refck_50m_sel",
eth_refck_50m_parents, 0xb0, 0xb4, 0xb8, 8, 1, 15, 0x1c4, 14),
- TOP_MUX(CK_TOP_ETH_SYS_200M_SEL, "eth_sys_200m_sel",
+ TOP_MUX(CLK_TOP_ETH_SYS_200M_SEL, "eth_sys_200m_sel",
eth_sys_200m_parents, 0xb0, 0xb4, 0xb8, 16, 1, 23, 0x1c4, 15),
- TOP_MUX(CK_TOP_ETH_SYS_SEL, "eth_sys_sel", pcie_mbist_250m_parents,
+ TOP_MUX(CLK_TOP_ETH_SYS_SEL, "eth_sys_sel", pcie_mbist_250m_parents,
0xb0, 0xb4, 0xb8, 24, 1, 31, 0x1c4, 16),
- TOP_MUX(CK_TOP_ETH_XGMII_SEL, "eth_xgmii_sel", eth_xgmii_parents, 0xc0,
+ TOP_MUX(CLK_TOP_ETH_XGMII_SEL, "eth_xgmii_sel", eth_xgmii_parents, 0xc0,
0xc4, 0xc8, 0, 2, 7, 0x1c4, 17),
- TOP_MUX(CK_TOP_BUS_TOPS_SEL, "bus_tops_sel", bus_tops_parents, 0xc0,
+ TOP_MUX(CLK_TOP_BUS_TOPS_SEL, "bus_tops_sel", bus_tops_parents, 0xc0,
0xc4, 0xc8, 8, 2, 15, 0x1c4, 18),
- TOP_MUX(CK_TOP_NPU_TOPS_SEL, "npu_tops_sel", npu_tops_parents, 0xc0,
+ TOP_MUX(CLK_TOP_NPU_TOPS_SEL, "npu_tops_sel", npu_tops_parents, 0xc0,
0xc4, 0xc8, 16, 1, 23, 0x1c4, 19),
- TOP_MUX(CK_TOP_DRAMC_SEL, "dramc_sel", sspxtp_parents, 0xc0, 0xc4, 0xc8,
+ TOP_MUX(CLK_TOP_DRAMC_SEL, "dramc_sel", sspxtp_parents, 0xc0, 0xc4, 0xc8,
24, 1, 31, 0x1c4, 20),
- TOP_MUX(CK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel", dramc_md32_parents,
+ TOP_MUX(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel", dramc_md32_parents,
0xd0, 0xd4, 0xd8, 0, 2, 7, 0x1c4, 21),
- TOP_MUX(CK_TOP_INFRA_F26M_SEL, "csw_infra_f26m_sel", sspxtp_parents,
+ TOP_MUX(CLK_TOP_INFRA_F26M_SEL, "csw_infra_f26m_sel", sspxtp_parents,
0xd0, 0xd4, 0xd8, 8, 1, 15, 0x1c4, 22),
- TOP_MUX(CK_TOP_PEXTP_P0_SEL, "pextp_p0_sel", sspxtp_parents, 0xd0, 0xd4,
+ TOP_MUX(CLK_TOP_PEXTP_P0_SEL, "pextp_p0_sel", sspxtp_parents, 0xd0, 0xd4,
0xd8, 16, 1, 23, 0x1c4, 23),
- TOP_MUX(CK_TOP_PEXTP_P1_SEL, "pextp_p1_sel", sspxtp_parents, 0xd0, 0xd4,
+ TOP_MUX(CLK_TOP_PEXTP_P1_SEL, "pextp_p1_sel", sspxtp_parents, 0xd0, 0xd4,
0xd8, 24, 1, 31, 0x1c4, 24),
- TOP_MUX(CK_TOP_PEXTP_P2_SEL, "pextp_p2_sel", sspxtp_parents, 0xe0, 0xe4,
+ TOP_MUX(CLK_TOP_PEXTP_P2_SEL, "pextp_p2_sel", sspxtp_parents, 0xe0, 0xe4,
0xe8, 0, 1, 7, 0x1c4, 25),
- TOP_MUX(CK_TOP_PEXTP_P3_SEL, "pextp_p3_sel", sspxtp_parents, 0xe0, 0xe4,
+ TOP_MUX(CLK_TOP_PEXTP_P3_SEL, "pextp_p3_sel", sspxtp_parents, 0xe0, 0xe4,
0xe8, 8, 1, 15, 0x1c4, 26),
- TOP_MUX(CK_TOP_DA_XTP_GLB_P0_SEL, "da_xtp_glb_p0_sel",
+ TOP_MUX(CLK_TOP_DA_XTP_GLB_P0_SEL, "da_xtp_glb_p0_sel",
da_xtp_glb_p0_parents, 0xe0, 0xe4, 0xe8, 16, 1, 23, 0x1c4, 27),
- TOP_MUX(CK_TOP_DA_XTP_GLB_P1_SEL, "da_xtp_glb_p1_sel",
+ TOP_MUX(CLK_TOP_DA_XTP_GLB_P1_SEL, "da_xtp_glb_p1_sel",
da_xtp_glb_p0_parents, 0xe0, 0xe4, 0xe8, 24, 1, 31, 0x1c4, 28),
- TOP_MUX(CK_TOP_DA_XTP_GLB_P2_SEL, "da_xtp_glb_p2_sel",
+ TOP_MUX(CLK_TOP_DA_XTP_GLB_P2_SEL, "da_xtp_glb_p2_sel",
da_xtp_glb_p0_parents, 0xf0, 0xf4, 0xf8, 0, 1, 7, 0x1c4, 29),
- TOP_MUX(CK_TOP_DA_XTP_GLB_P3_SEL, "da_xtp_glb_p3_sel",
+ TOP_MUX(CLK_TOP_DA_XTP_GLB_P3_SEL, "da_xtp_glb_p3_sel",
da_xtp_glb_p0_parents, 0xf0, 0xf4, 0xf8, 8, 1, 15, 0x1c4, 30),
- TOP_MUX(CK_TOP_CKM_SEL, "ckm_sel", sspxtp_parents, 0xf0, 0xf4, 0xf8, 16,
+ TOP_MUX(CLK_TOP_CKM_SEL, "ckm_sel", sspxtp_parents, 0xf0, 0xf4, 0xf8, 16,
1, 23, 0x1c8, 0),
- TOP_MUX(CK_TOP_DA_SELM_XTAL_SEL, "da_selm_xtal_sel", sspxtp_parents,
+ TOP_MUX(CLK_TOP_DA_SEL, "da_sel", sspxtp_parents,
0xf0, 0xf4, 0xf8, 24, 1, 31, 0x1c8, 1),
- TOP_MUX(CK_TOP_PEXTP_SEL, "pextp_sel", sspxtp_parents, 0x100, 0x104,
+ TOP_MUX(CLK_TOP_PEXTP_SEL, "pextp_sel", sspxtp_parents, 0x100, 0x104,
0x108, 0, 1, 7, 0x1c8, 2),
- TOP_MUX(CK_TOP_TOPS_P2_26M_SEL, "tops_p2_26m_sel", sspxtp_parents,
+ TOP_MUX(CLK_TOP_TOPS_P2_26M_SEL, "tops_p2_26m_sel", sspxtp_parents,
0x100, 0x104, 0x108, 8, 1, 15, 0x1c8, 3),
- TOP_MUX(CK_TOP_MCUSYS_BACKUP_625M_SEL, "mcusys_backup_625m_sel",
+ TOP_MUX(CLK_TOP_MCUSYS_BACKUP_625M_SEL, "mcusys_backup_625m_sel",
mcusys_backup_625m_parents, 0x100, 0x104, 0x108, 16, 1, 23,
0x1c8, 4),
- TOP_MUX(CK_TOP_NETSYS_SYNC_250M_SEL, "netsys_sync_250m_sel",
+ TOP_MUX(CLK_TOP_NETSYS_SYNC_250M_SEL, "netsys_sync_250m_sel",
pcie_mbist_250m_parents, 0x100, 0x104, 0x108, 24, 1, 31, 0x1c8,
5),
- TOP_MUX(CK_TOP_MACSEC_SEL, "macsec_sel", macsec_parents, 0x110, 0x114,
+ TOP_MUX(CLK_TOP_MACSEC_SEL, "macsec_sel", macsec_parents, 0x110, 0x114,
0x118, 0, 2, 7, 0x1c8, 6),
- TOP_MUX(CK_TOP_NETSYS_TOPS_400M_SEL, "netsys_tops_400m_sel",
+ TOP_MUX(CLK_TOP_NETSYS_TOPS_400M_SEL, "netsys_tops_400m_sel",
netsys_tops_400m_parents, 0x110, 0x114, 0x118, 8, 1, 15, 0x1c8,
7),
- TOP_MUX(CK_TOP_NETSYS_PPEFB_250M_SEL, "netsys_ppefb_250m_sel",
+ TOP_MUX(CLK_TOP_NETSYS_PPEFB_250M_SEL, "netsys_ppefb_250m_sel",
pcie_mbist_250m_parents, 0x110, 0x114, 0x118, 16, 1, 23, 0x1c8,
8),
- TOP_MUX(CK_TOP_NETSYS_WARP_SEL, "netsys_warp_sel", netsys_parents,
+ TOP_MUX(CLK_TOP_NETSYS_WARP_SEL, "netsys_warp_sel", netsys_parents,
0x110, 0x114, 0x118, 24, 2, 31, 0x1c8, 9),
- TOP_MUX(CK_TOP_ETH_MII_SEL, "eth_mii_sel", eth_mii_parents, 0x120,
+ TOP_MUX(CLK_TOP_ETH_MII_SEL, "eth_mii_sel", eth_mii_parents, 0x120,
0x124, 0x128, 0, 1, 7, 0x1c8, 10),
- TOP_MUX(CK_TOP_CK_NPU_SEL_CM_TOPS_SEL, "ck_npu_sel_cm_tops_sel",
+ TOP_MUX(CLK_TOP_NPU_SEL, "ck_npu_sel",
netsys_2x_parents, 0x120, 0x124, 0x128, 8, 2, 15, 0x1c8, 11),
};
-/* INFRA FIXED DIV */
-static const struct mtk_fixed_factor infracfg_mtk_fixed_factor[] = {
- TOP_FACTOR(CK_INFRA_CK_F26M, "infra_ck_f26m", CK_TOP_INFRA_F26M_SEL, 1,
- 1),
- TOP_FACTOR(CK_INFRA_PWM_O, "infra_pwm_o", CK_TOP_PWM_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_PCIE_OCC_P0, "infra_pcie_ck_occ_p0",
- CK_TOP_PEXTP_TL_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_PCIE_OCC_P1, "infra_pcie_ck_occ_p1",
- CK_TOP_PEXTP_TL_P1_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_PCIE_OCC_P2, "infra_pcie_ck_occ_p2",
- CK_TOP_PEXTP_TL_P2_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_PCIE_OCC_P3, "infra_pcie_ck_occ_p3",
- CK_TOP_PEXTP_TL_P3_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_133M_HCK, "infra_133m_hck", CK_TOP_SYSAXI, 1, 1),
- INFRA_FACTOR(CK_INFRA_133M_PHCK, "infra_133m_phck", CK_INFRA_133M_HCK,
- 1, 1),
- INFRA_FACTOR(CK_INFRA_66M_PHCK, "infra_66m_phck", CK_INFRA_133M_HCK, 1,
- 1),
- TOP_FACTOR(CK_INFRA_FAUD_L_O, "infra_faud_l_o", CK_TOP_AUD_L, 1, 1),
- TOP_FACTOR(CK_INFRA_FAUD_AUD_O, "infra_faud_aud_o", CK_TOP_A1SYS, 1, 1),
- TOP_FACTOR(CK_INFRA_FAUD_EG2_O, "infra_faud_eg2_o", CK_TOP_A_TUNER, 1,
- 1),
- TOP_FACTOR(CK_INFRA_I2C_O, "infra_i2c_o", CK_TOP_I2C_BCK, 1, 1),
- TOP_FACTOR(CK_INFRA_UART_O0, "infra_uart_o0", CK_TOP_UART_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_UART_O1, "infra_uart_o1", CK_TOP_UART_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_UART_O2, "infra_uart_o2", CK_TOP_UART_SEL, 1, 1),
- TOP_FACTOR(CK_INFRA_NFI_O, "infra_nfi_o", CK_TOP_NFI1X, 1, 1),
- TOP_FACTOR(CK_INFRA_SPINFI_O, "infra_spinfi_o", CK_TOP_SPINFI_BCK, 1,
- 1),
- TOP_FACTOR(CK_INFRA_SPI0_O, "infra_spi0_o", CK_TOP_SPI, 1, 1),
- TOP_FACTOR(CK_INFRA_SPI1_O, "infra_spi1_o", CK_TOP_SPIM_MST, 1, 1),
- INFRA_FACTOR(CK_INFRA_LB_MUX_FRTC, "infra_lb_mux_frtc", CK_INFRA_FRTC,
- 1, 1),
- TOP_FACTOR(CK_INFRA_FRTC, "infra_frtc", CK_TOP_CB_RTC_32K, 1, 1),
- TOP_FACTOR(CK_INFRA_FMSDC400_O, "infra_fmsdc400_o", CK_TOP_EMMC_400M, 1,
- 1),
- TOP_FACTOR(CK_INFRA_FMSDC2_HCK_OCC, "infra_fmsdc2_hck_occ",
- CK_TOP_EMMC_250M, 1, 1),
- TOP_FACTOR(CK_INFRA_PERI_133M, "infra_peri_133m", CK_TOP_SYSAXI, 1, 1),
- TOP_FACTOR(CK_INFRA_USB_O, "infra_usb_o", CK_TOP_USB_REF, 1, 1),
- TOP_FACTOR(CK_INFRA_USB_O_P1, "infra_usb_o_p1", CK_TOP_USB_CK_P1, 1, 1),
- TOP_FACTOR(CK_INFRA_USB_FRMCNT_O, "infra_usb_frmcnt_o",
- CK_TOP_USB_FRMCNT, 1, 1),
- TOP_FACTOR(CK_INFRA_USB_FRMCNT_O_P1, "infra_usb_frmcnt_o_p1",
- CK_TOP_USB_FRMCNT_P1, 1, 1),
- TOP_FACTOR(CK_INFRA_USB_XHCI_O, "infra_usb_xhci_o", CK_TOP_USB_XHCI, 1,
- 1),
- TOP_FACTOR(CK_INFRA_USB_XHCI_O_P1, "infra_usb_xhci_o_p1",
- CK_TOP_USB_XHCI_P1, 1, 1),
- XTAL_FACTOR(CK_INFRA_USB_PIPE_O, "infra_usb_pipe_o", CLK_XTAL, 1, 1),
- XTAL_FACTOR(CK_INFRA_USB_PIPE_O_P1, "infra_usb_pipe_o_p1", CLK_XTAL, 1,
- 1),
- XTAL_FACTOR(CK_INFRA_USB_UTMI_O, "infra_usb_utmi_o", CLK_XTAL, 1, 1),
- XTAL_FACTOR(CK_INFRA_USB_UTMI_O_P1, "infra_usb_utmi_o_p1", CLK_XTAL, 1,
- 1),
- XTAL_FACTOR(CK_INFRA_PCIE_PIPE_OCC_P0, "infra_pcie_pipe_ck_occ_p0",
- CLK_XTAL, 1, 1),
- XTAL_FACTOR(CK_INFRA_PCIE_PIPE_OCC_P1, "infra_pcie_pipe_ck_occ_p1",
- CLK_XTAL, 1, 1),
- XTAL_FACTOR(CK_INFRA_PCIE_PIPE_OCC_P2, "infra_pcie_pipe_ck_occ_p2",
- CLK_XTAL, 1, 1),
- XTAL_FACTOR(CK_INFRA_PCIE_PIPE_OCC_P3, "infra_pcie_pipe_ck_occ_p3",
- CLK_XTAL, 1, 1),
- TOP_FACTOR(CK_INFRA_F26M_O0, "infra_f26m_o0", CK_TOP_INFRA_F26M, 1, 1),
- TOP_FACTOR(CK_INFRA_F26M_O1, "infra_f26m_o1", CK_TOP_INFRA_F26M, 1, 1),
- TOP_FACTOR(CK_INFRA_133M_MCK, "infra_133m_mck", CK_TOP_SYSAXI, 1, 1),
- TOP_FACTOR(CK_INFRA_66M_MCK, "infra_66m_mck", CK_TOP_SYSAXI, 1, 1),
- TOP_FACTOR(CK_INFRA_PERI_66M_O, "infra_peri_66m_o", CK_TOP_SYSAXI, 1,
- 1),
- TOP_FACTOR(CK_INFRA_USB_SYS_O, "infra_usb_sys_o", CK_TOP_USB_SYS, 1, 1),
- TOP_FACTOR(CK_INFRA_USB_SYS_O_P1, "infra_usb_sys_o_p1",
- CK_TOP_USB_SYS_P1, 1, 1),
-};
-
/* INFRASYS MUX PARENTS */
-static const int infra_mux_uart0_parents[] = { CK_INFRA_CK_F26M,
- CK_INFRA_UART_O0 };
+static const int infra_mux_uart0_parents[] = { CLK_TOP_INFRA_F26M_SEL,
+ CLK_TOP_UART_SEL };
-static const int infra_mux_uart1_parents[] = { CK_INFRA_CK_F26M,
- CK_INFRA_UART_O1 };
+static const int infra_mux_uart1_parents[] = { CLK_TOP_INFRA_F26M_SEL,
+ CLK_TOP_UART_SEL };
-static const int infra_mux_uart2_parents[] = { CK_INFRA_CK_F26M,
- CK_INFRA_UART_O2 };
+static const int infra_mux_uart2_parents[] = { CLK_TOP_INFRA_F26M_SEL,
+ CLK_TOP_UART_SEL };
-static const int infra_mux_spi0_parents[] = { CK_INFRA_I2C_O, CK_INFRA_SPI0_O };
+static const int infra_mux_spi0_parents[] = { CLK_TOP_I2C_SEL, CLK_TOP_SPI_SEL };
-static const int infra_mux_spi1_parents[] = { CK_INFRA_I2C_O, CK_INFRA_SPI1_O };
+static const int infra_mux_spi1_parents[] = { CLK_TOP_I2C_SEL, CLK_TOP_SPIM_MST_SEL };
-static const int infra_pwm_bck_parents[] = { CK_TOP_INFRA_F32K,
- CK_INFRA_CK_F26M, CK_INFRA_66M_MCK,
- CK_INFRA_PWM_O };
+static const int infra_pwm_bck_parents[] = { CLK_TOP_RTC_32P7K,
+ CLK_TOP_INFRA_F26M_SEL, CLK_TOP_SYSAXI_SEL,
+ CLK_TOP_PWM_SEL };
static const int infra_pcie_gfmux_tl_ck_o_p0_parents[] = {
- CK_TOP_INFRA_F32K, CK_INFRA_CK_F26M, CK_INFRA_CK_F26M,
- CK_INFRA_PCIE_OCC_P0
+ CLK_TOP_RTC_32P7K, CLK_TOP_INFRA_F26M_SEL, CLK_TOP_INFRA_F26M_SEL,
+ CLK_TOP_PEXTP_TL_SEL
};
static const int infra_pcie_gfmux_tl_ck_o_p1_parents[] = {
- CK_TOP_INFRA_F32K, CK_INFRA_CK_F26M, CK_INFRA_CK_F26M,
- CK_INFRA_PCIE_OCC_P1
+ CLK_TOP_RTC_32P7K, CLK_TOP_INFRA_F26M_SEL, CLK_TOP_INFRA_F26M_SEL,
+ CLK_TOP_PEXTP_TL_P1_SEL
};
static const int infra_pcie_gfmux_tl_ck_o_p2_parents[] = {
- CK_TOP_INFRA_F32K, CK_INFRA_CK_F26M, CK_INFRA_CK_F26M,
- CK_INFRA_PCIE_OCC_P2
+ CLK_TOP_RTC_32P7K, CLK_TOP_INFRA_F26M_SEL, CLK_TOP_INFRA_F26M_SEL,
+ CLK_TOP_PEXTP_TL_P2_SEL
};
static const int infra_pcie_gfmux_tl_ck_o_p3_parents[] = {
- CK_TOP_INFRA_F32K, CK_INFRA_CK_F26M, CK_INFRA_CK_F26M,
- CK_INFRA_PCIE_OCC_P3
+ CLK_TOP_RTC_32P7K, CLK_TOP_INFRA_F26M_SEL, CLK_TOP_INFRA_F26M_SEL,
+ CLK_TOP_PEXTP_TL_P3_SEL
};
#define INFRA_MUX(_id, _name, _parents, _reg, _shift, _width) \
@@ -542,51 +486,51 @@
.mux_clr_reg = _reg + 0x4, .mux_shift = _shift, \
.mux_mask = BIT(_width) - 1, .parent = _parents, \
.num_parents = ARRAY_SIZE(_parents), \
- .flags = CLK_MUX_SETCLR_UPD | CLK_PARENT_INFRASYS, \
+ .flags = CLK_MUX_SETCLR_UPD | CLK_PARENT_TOPCKGEN, \
}
/* INFRA MUX */
static const struct mtk_composite infracfg_mtk_mux[] = {
- INFRA_MUX(CK_INFRA_MUX_UART0_SEL, "infra_mux_uart0_sel",
+ INFRA_MUX(CLK_INFRA_MUX_UART0_SEL, "infra_mux_uart0_sel",
infra_mux_uart0_parents, 0x10, 0, 1),
- INFRA_MUX(CK_INFRA_MUX_UART1_SEL, "infra_mux_uart1_sel",
+ INFRA_MUX(CLK_INFRA_MUX_UART1_SEL, "infra_mux_uart1_sel",
infra_mux_uart1_parents, 0x10, 1, 1),
- INFRA_MUX(CK_INFRA_MUX_UART2_SEL, "infra_mux_uart2_sel",
+ INFRA_MUX(CLK_INFRA_MUX_UART2_SEL, "infra_mux_uart2_sel",
infra_mux_uart2_parents, 0x10, 2, 1),
- INFRA_MUX(CK_INFRA_MUX_SPI0_SEL, "infra_mux_spi0_sel",
+ INFRA_MUX(CLK_INFRA_MUX_SPI0_SEL, "infra_mux_spi0_sel",
infra_mux_spi0_parents, 0x10, 4, 1),
- INFRA_MUX(CK_INFRA_MUX_SPI1_SEL, "infra_mux_spi1_sel",
+ INFRA_MUX(CLK_INFRA_MUX_SPI1_SEL, "infra_mux_spi1_sel",
infra_mux_spi1_parents, 0x10, 5, 1),
- INFRA_MUX(CK_INFRA_MUX_SPI2_SEL, "infra_mux_spi2_sel",
+ INFRA_MUX(CLK_INFRA_MUX_SPI2_SEL, "infra_mux_spi2_sel",
infra_mux_spi0_parents, 0x10, 6, 1),
- INFRA_MUX(CK_INFRA_PWM_SEL, "infra_pwm_sel", infra_pwm_bck_parents,
+ INFRA_MUX(CLK_INFRA_PWM_SEL, "infra_pwm_sel", infra_pwm_bck_parents,
0x10, 14, 2),
- INFRA_MUX(CK_INFRA_PWM_CK1_SEL, "infra_pwm_ck1_sel",
+ INFRA_MUX(CLK_INFRA_PWM_CK1_SEL, "infra_pwm_ck1_sel",
infra_pwm_bck_parents, 0x10, 16, 2),
- INFRA_MUX(CK_INFRA_PWM_CK2_SEL, "infra_pwm_ck2_sel",
+ INFRA_MUX(CLK_INFRA_PWM_CK2_SEL, "infra_pwm_ck2_sel",
infra_pwm_bck_parents, 0x10, 18, 2),
- INFRA_MUX(CK_INFRA_PWM_CK3_SEL, "infra_pwm_ck3_sel",
+ INFRA_MUX(CLK_INFRA_PWM_CK3_SEL, "infra_pwm_ck3_sel",
infra_pwm_bck_parents, 0x10, 20, 2),
- INFRA_MUX(CK_INFRA_PWM_CK4_SEL, "infra_pwm_ck4_sel",
+ INFRA_MUX(CLK_INFRA_PWM_CK4_SEL, "infra_pwm_ck4_sel",
infra_pwm_bck_parents, 0x10, 22, 2),
- INFRA_MUX(CK_INFRA_PWM_CK5_SEL, "infra_pwm_ck5_sel",
+ INFRA_MUX(CLK_INFRA_PWM_CK5_SEL, "infra_pwm_ck5_sel",
infra_pwm_bck_parents, 0x10, 24, 2),
- INFRA_MUX(CK_INFRA_PWM_CK6_SEL, "infra_pwm_ck6_sel",
+ INFRA_MUX(CLK_INFRA_PWM_CK6_SEL, "infra_pwm_ck6_sel",
infra_pwm_bck_parents, 0x10, 26, 2),
- INFRA_MUX(CK_INFRA_PWM_CK7_SEL, "infra_pwm_ck7_sel",
+ INFRA_MUX(CLK_INFRA_PWM_CK7_SEL, "infra_pwm_ck7_sel",
infra_pwm_bck_parents, 0x10, 28, 2),
- INFRA_MUX(CK_INFRA_PWM_CK8_SEL, "infra_pwm_ck8_sel",
+ INFRA_MUX(CLK_INFRA_PWM_CK8_SEL, "infra_pwm_ck8_sel",
infra_pwm_bck_parents, 0x10, 30, 2),
- INFRA_MUX(CK_INFRA_PCIE_GFMUX_TL_O_P0_SEL,
+ INFRA_MUX(CLK_INFRA_PCIE_GFMUX_TL_O_P0_SEL,
"infra_pcie_gfmux_tl_o_p0_sel",
infra_pcie_gfmux_tl_ck_o_p0_parents, 0x20, 0, 2),
- INFRA_MUX(CK_INFRA_PCIE_GFMUX_TL_O_P1_SEL,
+ INFRA_MUX(CLK_INFRA_PCIE_GFMUX_TL_O_P1_SEL,
"infra_pcie_gfmux_tl_o_p1_sel",
infra_pcie_gfmux_tl_ck_o_p1_parents, 0x20, 2, 2),
- INFRA_MUX(CK_INFRA_PCIE_GFMUX_TL_O_P2_SEL,
+ INFRA_MUX(CLK_INFRA_PCIE_GFMUX_TL_O_P2_SEL,
"infra_pcie_gfmux_tl_o_p2_sel",
infra_pcie_gfmux_tl_ck_o_p2_parents, 0x20, 4, 2),
- INFRA_MUX(CK_INFRA_PCIE_GFMUX_TL_O_P3_SEL,
+ INFRA_MUX(CLK_INFRA_PCIE_GFMUX_TL_O_P3_SEL,
"infra_pcie_gfmux_tl_o_p3_sel",
infra_pcie_gfmux_tl_ck_o_p3_parents, 0x20, 6, 2),
};
@@ -615,218 +559,238 @@
.sta_ofs = 0x68,
};
-#define GATE_INFRA0(_id, _name, _parent, _shift) \
+#define GATE_INFRA0(_id, _name, _parent, _shift, _flags) \
{ \
.id = _id, .parent = _parent, .regs = &infra_0_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_INFRASYS, \
+ .flags = _flags, \
}
+#define GATE_INFRA0_INFRA(_id, _name, _parent, _shift) \
+ GATE_INFRA0(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_INFRASYS)
+#define GATE_INFRA0_TOP(_id, _name, _parent, _shift) \
+ GATE_INFRA0(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
-#define GATE_INFRA1(_id, _name, _parent, _shift) \
+#define GATE_INFRA1(_id, _name, _parent, _shift, _flags) \
{ \
.id = _id, .parent = _parent, .regs = &infra_1_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_INFRASYS, \
+ .flags = _flags, \
}
+#define GATE_INFRA1_INFRA(_id, _name, _parent, _shift) \
+ GATE_INFRA1(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_INFRASYS)
+#define GATE_INFRA1_TOP(_id, _name, _parent, _shift) \
+ GATE_INFRA1(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
-#define GATE_INFRA2(_id, _name, _parent, _shift) \
+#define GATE_INFRA2(_id, _name, _parent, _shift, _flags) \
{ \
.id = _id, .parent = _parent, .regs = &infra_2_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_INFRASYS, \
+ .flags = _flags, \
}
+#define GATE_INFRA2_INFRA(_id, _name, _parent, _shift) \
+ GATE_INFRA2(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_INFRASYS)
+#define GATE_INFRA2_TOP(_id, _name, _parent, _shift) \
+ GATE_INFRA2(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
-#define GATE_INFRA3(_id, _name, _parent, _shift) \
+#define GATE_INFRA3(_id, _name, _parent, _shift, _flags) \
{ \
.id = _id, .parent = _parent, .regs = &infra_3_cg_regs, \
.shift = _shift, \
- .flags = CLK_GATE_SETCLR | CLK_PARENT_INFRASYS, \
+ .flags = _flags, \
}
+#define GATE_INFRA3_INFRA(_id, _name, _parent, _shift) \
+ GATE_INFRA3(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_INFRASYS)
+#define GATE_INFRA3_TOP(_id, _name, _parent, _shift) \
+ GATE_INFRA3(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_TOPCKGEN)
+#define GATE_INFRA3_XTAL(_id, _name, _parent, _shift) \
+ GATE_INFRA3(_id, _name, _parent, _shift, CLK_GATE_SETCLR | CLK_PARENT_XTAL)
/* INFRA GATE */
static const struct mtk_gate infracfg_mtk_gates[] = {
- GATE_INFRA1(CK_INFRA_66M_GPT_BCK, "infra_hf_66m_gpt_bck",
- CK_INFRA_66M_MCK, 0),
- GATE_INFRA1(CK_INFRA_66M_PWM_HCK, "infra_hf_66m_pwm_hck",
- CK_INFRA_66M_MCK, 1),
- GATE_INFRA1(CK_INFRA_66M_PWM_BCK, "infra_hf_66m_pwm_bck",
- CK_INFRA_PWM_SEL, 2),
- GATE_INFRA1(CK_INFRA_66M_PWM_CK1, "infra_hf_66m_pwm_ck1",
- CK_INFRA_PWM_CK1_SEL, 3),
- GATE_INFRA1(CK_INFRA_66M_PWM_CK2, "infra_hf_66m_pwm_ck2",
- CK_INFRA_PWM_CK2_SEL, 4),
- GATE_INFRA1(CK_INFRA_66M_PWM_CK3, "infra_hf_66m_pwm_ck3",
- CK_INFRA_PWM_CK3_SEL, 5),
- GATE_INFRA1(CK_INFRA_66M_PWM_CK4, "infra_hf_66m_pwm_ck4",
- CK_INFRA_PWM_CK4_SEL, 6),
- GATE_INFRA1(CK_INFRA_66M_PWM_CK5, "infra_hf_66m_pwm_ck5",
- CK_INFRA_PWM_CK5_SEL, 7),
- GATE_INFRA1(CK_INFRA_66M_PWM_CK6, "infra_hf_66m_pwm_ck6",
- CK_INFRA_PWM_CK6_SEL, 8),
- GATE_INFRA1(CK_INFRA_66M_PWM_CK7, "infra_hf_66m_pwm_ck7",
- CK_INFRA_PWM_CK7_SEL, 9),
- GATE_INFRA1(CK_INFRA_66M_PWM_CK8, "infra_hf_66m_pwm_ck8",
- CK_INFRA_PWM_CK8_SEL, 10),
- GATE_INFRA1(CK_INFRA_133M_CQDMA_BCK, "infra_hf_133m_cqdma_bck",
- CK_INFRA_133M_MCK, 12),
- GATE_INFRA1(CK_INFRA_66M_AUD_SLV_BCK, "infra_66m_aud_slv_bck",
- CK_INFRA_66M_PHCK, 13),
- GATE_INFRA1(CK_INFRA_AUD_26M, "infra_f_faud_26m", CK_INFRA_CK_F26M, 14),
- GATE_INFRA1(CK_INFRA_AUD_L, "infra_f_faud_l", CK_INFRA_FAUD_L_O, 15),
- GATE_INFRA1(CK_INFRA_AUD_AUD, "infra_f_aud_aud", CK_INFRA_FAUD_AUD_O,
- 16),
- GATE_INFRA1(CK_INFRA_AUD_EG2, "infra_f_faud_eg2", CK_INFRA_FAUD_EG2_O,
- 18),
- GATE_INFRA1(CK_INFRA_DRAMC_F26M, "infra_dramc_f26m", CK_INFRA_CK_F26M,
- 19),
- GATE_INFRA1(CK_INFRA_133M_DBG_ACKM, "infra_hf_133m_dbg_ackm",
- CK_INFRA_133M_MCK, 20),
- GATE_INFRA1(CK_INFRA_66M_AP_DMA_BCK, "infra_66m_ap_dma_bck",
- CK_INFRA_66M_MCK, 21),
- GATE_INFRA1(CK_INFRA_66M_SEJ_BCK, "infra_hf_66m_sej_bck",
- CK_INFRA_66M_MCK, 29),
- GATE_INFRA1(CK_INFRA_PRE_CK_SEJ_F13M, "infra_pre_ck_sej_f13m",
- CK_INFRA_CK_F26M, 30),
- GATE_INFRA1(CK_INFRA_66M_TRNG, "infra_hf_66m_trng", CK_INFRA_PERI_66M_O,
- 31),
- GATE_INFRA2(CK_INFRA_26M_THERM_SYSTEM, "infra_hf_26m_therm_system",
- CK_INFRA_CK_F26M, 0),
- GATE_INFRA2(CK_INFRA_I2C_BCK, "infra_i2c_bck", CK_INFRA_I2C_O, 1),
- GATE_INFRA2(CK_INFRA_66M_UART0_PCK, "infra_hf_66m_uart0_pck",
- CK_INFRA_66M_MCK, 3),
- GATE_INFRA2(CK_INFRA_66M_UART1_PCK, "infra_hf_66m_uart1_pck",
- CK_INFRA_66M_MCK, 4),
- GATE_INFRA2(CK_INFRA_66M_UART2_PCK, "infra_hf_66m_uart2_pck",
- CK_INFRA_66M_MCK, 5),
- GATE_INFRA2(CK_INFRA_52M_UART0_CK, "infra_f_52m_uart0",
- CK_INFRA_MUX_UART0_SEL, 3),
- GATE_INFRA2(CK_INFRA_52M_UART1_CK, "infra_f_52m_uart1",
- CK_INFRA_MUX_UART1_SEL, 4),
- GATE_INFRA2(CK_INFRA_52M_UART2_CK, "infra_f_52m_uart2",
- CK_INFRA_MUX_UART2_SEL, 5),
- GATE_INFRA2(CK_INFRA_NFI, "infra_f_fnfi", CK_INFRA_NFI_O, 9),
- GATE_INFRA2(CK_INFRA_SPINFI, "infra_f_fspinfi", CK_INFRA_SPINFI_O, 10),
- GATE_INFRA2(CK_INFRA_66M_NFI_HCK, "infra_hf_66m_nfi_hck",
- CK_INFRA_66M_MCK, 11),
- GATE_INFRA2(CK_INFRA_104M_SPI0, "infra_hf_104m_spi0",
- CK_INFRA_MUX_SPI0_SEL, 12),
- GATE_INFRA2(CK_INFRA_104M_SPI1, "infra_hf_104m_spi1",
- CK_INFRA_MUX_SPI1_SEL, 13),
- GATE_INFRA2(CK_INFRA_104M_SPI2_BCK, "infra_hf_104m_spi2_bck",
- CK_INFRA_MUX_SPI2_SEL, 14),
- GATE_INFRA2(CK_INFRA_66M_SPI0_HCK, "infra_hf_66m_spi0_hck",
- CK_INFRA_66M_MCK, 15),
- GATE_INFRA2(CK_INFRA_66M_SPI1_HCK, "infra_hf_66m_spi1_hck",
- CK_INFRA_66M_MCK, 16),
- GATE_INFRA2(CK_INFRA_66M_SPI2_HCK, "infra_hf_66m_spi2_hck",
- CK_INFRA_66M_MCK, 17),
- GATE_INFRA2(CK_INFRA_66M_FLASHIF_AXI, "infra_hf_66m_flashif_axi",
- CK_INFRA_66M_MCK, 18),
- GATE_INFRA2(CK_INFRA_RTC, "infra_f_frtc", CK_INFRA_LB_MUX_FRTC, 19),
- GATE_INFRA2(CK_INFRA_26M_ADC_BCK, "infra_f_26m_adc_bck",
- CK_INFRA_F26M_O1, 20),
- GATE_INFRA2(CK_INFRA_RC_ADC, "infra_f_frc_adc", CK_INFRA_26M_ADC_BCK,
- 21),
- GATE_INFRA2(CK_INFRA_MSDC400, "infra_f_fmsdc400", CK_INFRA_FMSDC400_O,
- 22),
- GATE_INFRA2(CK_INFRA_MSDC2_HCK, "infra_f_fmsdc2_hck",
- CK_INFRA_FMSDC2_HCK_OCC, 23),
- GATE_INFRA2(CK_INFRA_133M_MSDC_0_HCK, "infra_hf_133m_msdc_0_hck",
- CK_INFRA_PERI_133M, 24),
- GATE_INFRA2(CK_INFRA_66M_MSDC_0_HCK, "infra_66m_msdc_0_hck",
- CK_INFRA_66M_PHCK, 25),
- GATE_INFRA2(CK_INFRA_133M_CPUM_BCK, "infra_hf_133m_cpum_bck",
- CK_INFRA_133M_MCK, 26),
- GATE_INFRA2(CK_INFRA_BIST2FPC, "infra_hf_fbist2fpc", CK_INFRA_NFI_O,
- 27),
- GATE_INFRA2(CK_INFRA_I2C_X16W_MCK_CK_P1, "infra_hf_i2c_x16w_mck_ck_p1",
- CK_INFRA_133M_MCK, 29),
- GATE_INFRA2(CK_INFRA_I2C_X16W_PCK_CK_P1, "infra_hf_i2c_x16w_pck_ck_p1",
- CK_INFRA_66M_PHCK, 31),
- GATE_INFRA3(CK_INFRA_133M_USB_HCK, "infra_133m_usb_hck",
- CK_INFRA_133M_PHCK, 0),
- GATE_INFRA3(CK_INFRA_133M_USB_HCK_CK_P1, "infra_133m_usb_hck_ck_p1",
- CK_INFRA_133M_PHCK, 1),
- GATE_INFRA3(CK_INFRA_66M_USB_HCK, "infra_66m_usb_hck",
- CK_INFRA_66M_PHCK, 2),
- GATE_INFRA3(CK_INFRA_66M_USB_HCK_CK_P1, "infra_66m_usb_hck_ck_p1",
- CK_INFRA_66M_PHCK, 3),
- GATE_INFRA3(CK_INFRA_USB_SYS, "infra_usb_sys", CK_INFRA_USB_SYS_O, 4),
- GATE_INFRA3(CK_INFRA_USB_SYS_CK_P1, "infra_usb_sys_ck_p1",
- CK_INFRA_USB_SYS_O_P1, 5),
- GATE_INFRA3(CK_INFRA_USB_REF, "infra_usb_ref", CK_INFRA_USB_O, 6),
- GATE_INFRA3(CK_INFRA_USB_CK_P1, "infra_usb_ck_p1", CK_INFRA_USB_O_P1,
- 7),
- GATE_INFRA3(CK_INFRA_USB_FRMCNT, "infra_usb_frmcnt",
- CK_INFRA_USB_FRMCNT_O, 8),
- GATE_INFRA3(CK_INFRA_USB_FRMCNT_CK_P1, "infra_usb_frmcnt_ck_p1",
- CK_INFRA_USB_FRMCNT_O_P1, 9),
- GATE_INFRA3(CK_INFRA_USB_PIPE, "infra_usb_pipe", CK_INFRA_USB_PIPE_O,
- 10),
- GATE_INFRA3(CK_INFRA_USB_PIPE_CK_P1, "infra_usb_pipe_ck_p1",
- CK_INFRA_USB_PIPE_O_P1, 11),
- GATE_INFRA3(CK_INFRA_USB_UTMI, "infra_usb_utmi", CK_INFRA_USB_UTMI_O,
- 12),
- GATE_INFRA3(CK_INFRA_USB_UTMI_CK_P1, "infra_usb_utmi_ck_p1",
- CK_INFRA_USB_UTMI_O_P1, 13),
- GATE_INFRA3(CK_INFRA_USB_XHCI, "infra_usb_xhci", CK_INFRA_USB_XHCI_O,
- 14),
- GATE_INFRA3(CK_INFRA_USB_XHCI_CK_P1, "infra_usb_xhci_ck_p1",
- CK_INFRA_USB_XHCI_O_P1, 15),
- GATE_INFRA3(CK_INFRA_PCIE_GFMUX_TL_P0, "infra_pcie_gfmux_tl_ck_p0",
- CK_INFRA_PCIE_GFMUX_TL_O_P0_SEL, 20),
- GATE_INFRA3(CK_INFRA_PCIE_GFMUX_TL_P1, "infra_pcie_gfmux_tl_ck_p1",
- CK_INFRA_PCIE_GFMUX_TL_O_P1_SEL, 21),
- GATE_INFRA3(CK_INFRA_PCIE_GFMUX_TL_P2, "infra_pcie_gfmux_tl_ck_p2",
- CK_INFRA_PCIE_GFMUX_TL_O_P2_SEL, 22),
- GATE_INFRA3(CK_INFRA_PCIE_GFMUX_TL_P3, "infra_pcie_gfmux_tl_ck_p3",
- CK_INFRA_PCIE_GFMUX_TL_O_P3_SEL, 23),
- GATE_INFRA3(CK_INFRA_PCIE_PIPE_P0, "infra_pcie_pipe_ck_p0",
- CK_INFRA_PCIE_PIPE_OCC_P0, 24),
- GATE_INFRA3(CK_INFRA_PCIE_PIPE_P1, "infra_pcie_pipe_ck_p1",
- CK_INFRA_PCIE_PIPE_OCC_P1, 25),
- GATE_INFRA3(CK_INFRA_PCIE_PIPE_P2, "infra_pcie_pipe_ck_p2",
- CK_INFRA_PCIE_PIPE_OCC_P2, 26),
- GATE_INFRA3(CK_INFRA_PCIE_PIPE_P3, "infra_pcie_pipe_ck_p3",
- CK_INFRA_PCIE_PIPE_OCC_P3, 27),
- GATE_INFRA3(CK_INFRA_133M_PCIE_CK_P0, "infra_133m_pcie_ck_p0",
- CK_INFRA_133M_PHCK, 28),
- GATE_INFRA3(CK_INFRA_133M_PCIE_CK_P1, "infra_133m_pcie_ck_p1",
- CK_INFRA_133M_PHCK, 29),
- GATE_INFRA3(CK_INFRA_133M_PCIE_CK_P2, "infra_133m_pcie_ck_p2",
- CK_INFRA_133M_PHCK, 30),
- GATE_INFRA3(CK_INFRA_133M_PCIE_CK_P3, "infra_133m_pcie_ck_p3",
- CK_INFRA_133M_PHCK, 31),
- GATE_INFRA0(CK_INFRA_PCIE_PERI_26M_CK_P0,
- "infra_pcie_peri_ck_26m_ck_p0", CK_INFRA_F26M_O0, 7),
- GATE_INFRA0(CK_INFRA_PCIE_PERI_26M_CK_P1,
- "infra_pcie_peri_ck_26m_ck_p1", CK_INFRA_F26M_O0, 8),
- GATE_INFRA0(CK_INFRA_PCIE_PERI_26M_CK_P2,
- "infra_pcie_peri_ck_26m_ck_p2", CK_INFRA_F26M_O0, 9),
- GATE_INFRA0(CK_INFRA_PCIE_PERI_26M_CK_P3,
- "infra_pcie_peri_ck_26m_ck_p3", CK_INFRA_F26M_O0, 10),
+ GATE_INFRA0_TOP(CLK_INFRA_PCIE_PERI_26M_CK_P0,
+ "infra_pcie_peri_ck_26m_ck_p0", CLK_TOP_INFRA_F26M_SEL, 7),
+ GATE_INFRA0_TOP(CLK_INFRA_PCIE_PERI_26M_CK_P1,
+ "infra_pcie_peri_ck_26m_ck_p1", CLK_TOP_INFRA_F26M_SEL, 8),
+ GATE_INFRA0_INFRA(CLK_INFRA_PCIE_PERI_26M_CK_P2,
+ "infra_pcie_peri_ck_26m_ck_p2", CLK_INFRA_PCIE_PERI_26M_CK_P3, 9),
+ GATE_INFRA0_TOP(CLK_INFRA_PCIE_PERI_26M_CK_P3,
+ "infra_pcie_peri_ck_26m_ck_p3", CLK_TOP_INFRA_F26M_SEL, 10),
+ GATE_INFRA1_TOP(CLK_INFRA_66M_GPT_BCK, "infra_hf_66m_gpt_bck",
+ CLK_TOP_SYSAXI_SEL, 0),
+ GATE_INFRA1_TOP(CLK_INFRA_66M_PWM_HCK, "infra_hf_66m_pwm_hck",
+ CLK_TOP_SYSAXI_SEL, 1),
+ GATE_INFRA1_INFRA(CLK_INFRA_66M_PWM_BCK, "infra_hf_66m_pwm_bck",
+ CLK_INFRA_PWM_SEL, 2),
+ GATE_INFRA1_INFRA(CLK_INFRA_66M_PWM_CK1, "infra_hf_66m_pwm_ck1",
+ CLK_INFRA_PWM_CK1_SEL, 3),
+ GATE_INFRA1_INFRA(CLK_INFRA_66M_PWM_CK2, "infra_hf_66m_pwm_ck2",
+ CLK_INFRA_PWM_CK2_SEL, 4),
+ GATE_INFRA1_INFRA(CLK_INFRA_66M_PWM_CK3, "infra_hf_66m_pwm_ck3",
+ CLK_INFRA_PWM_CK3_SEL, 5),
+ GATE_INFRA1_INFRA(CLK_INFRA_66M_PWM_CK4, "infra_hf_66m_pwm_ck4",
+ CLK_INFRA_PWM_CK4_SEL, 6),
+ GATE_INFRA1_INFRA(CLK_INFRA_66M_PWM_CK5, "infra_hf_66m_pwm_ck5",
+ CLK_INFRA_PWM_CK5_SEL, 7),
+ GATE_INFRA1_INFRA(CLK_INFRA_66M_PWM_CK6, "infra_hf_66m_pwm_ck6",
+ CLK_INFRA_PWM_CK6_SEL, 8),
+ GATE_INFRA1_INFRA(CLK_INFRA_66M_PWM_CK7, "infra_hf_66m_pwm_ck7",
+ CLK_INFRA_PWM_CK7_SEL, 9),
+ GATE_INFRA1_INFRA(CLK_INFRA_66M_PWM_CK8, "infra_hf_66m_pwm_ck8",
+ CLK_INFRA_PWM_CK8_SEL, 10),
+ GATE_INFRA1_TOP(CLK_INFRA_133M_CQDMA_BCK, "infra_hf_133m_cqdma_bck",
+ CLK_TOP_SYSAXI_SEL, 12),
+ GATE_INFRA1_TOP(CLK_INFRA_66M_AUD_SLV_BCK, "infra_66m_aud_slv_bck",
+ CLK_TOP_SYSAXI_SEL, 13),
+ GATE_INFRA1_TOP(CLK_INFRA_AUD_26M, "infra_f_faud_26m", CLK_TOP_INFRA_F26M_SEL, 14),
+ GATE_INFRA1_TOP(CLK_INFRA_AUD_L, "infra_f_faud_l", CLK_TOP_AUD_L_SEL, 15),
+ GATE_INFRA1_TOP(CLK_INFRA_AUD_AUD, "infra_f_aud_aud", CLK_TOP_A1SYS_SEL,
+ 16),
+ GATE_INFRA1_TOP(CLK_INFRA_AUD_EG2, "infra_f_faud_eg2", CLK_TOP_A_TUNER_SEL,
+ 18),
+ GATE_INFRA1_TOP(CLK_INFRA_DRAMC_F26M, "infra_dramc_f26m", CLK_TOP_INFRA_F26M_SEL,
+ 19),
+ GATE_INFRA1_TOP(CLK_INFRA_133M_DBG_ACKM, "infra_hf_133m_dbg_ackm",
+ CLK_TOP_SYSAXI_SEL, 20),
+ GATE_INFRA1_TOP(CLK_INFRA_66M_AP_DMA_BCK, "infra_66m_ap_dma_bck",
+ CLK_TOP_SYSAXI_SEL, 21),
+ GATE_INFRA1_TOP(CLK_INFRA_66M_SEJ_BCK, "infra_hf_66m_sej_bck",
+ CLK_TOP_SYSAXI_SEL, 29),
+ GATE_INFRA1_TOP(CLK_INFRA_PRE_CK_SEJ_F13M, "infra_pre_ck_sej_f13m",
+ CLK_TOP_INFRA_F26M_SEL, 30),
+ /* GATE_INFRA1_TOP(CLK_INFRA_66M_TRNG, "infra_hf_66m_trng", CLK_TOP_SYSAXI_SEL,
+ 31), */
+ GATE_INFRA2_TOP(CLK_INFRA_26M_THERM_SYSTEM, "infra_hf_26m_therm_system",
+ CLK_TOP_INFRA_F26M_SEL, 0),
+ GATE_INFRA2_TOP(CLK_INFRA_I2C_BCK, "infra_i2c_bck", CLK_TOP_I2C_SEL, 1),
+ /* GATE_INFRA2_TOP(CLK_INFRA_66M_UART0_PCK, "infra_hf_66m_uart0_pck",
+ CLK_TOP_SYSAXI_SEL, 3), */
+ /* GATE_INFRA2_TOP(CLK_INFRA_66M_UART1_PCK, "infra_hf_66m_uart1_pck",
+ CLK_TOP_SYSAXI_SEL, 4), */
+ /* GATE_INFRA2_TOP(CLK_INFRA_66M_UART2_PCK, "infra_hf_66m_uart2_pck",
+ CLK_TOP_SYSAXI_SEL, 5), */
+ GATE_INFRA2_INFRA(CLK_INFRA_52M_UART0_CK, "infra_f_52m_uart0",
+ CLK_INFRA_MUX_UART0_SEL, 3),
+ GATE_INFRA2_INFRA(CLK_INFRA_52M_UART1_CK, "infra_f_52m_uart1",
+ CLK_INFRA_MUX_UART1_SEL, 4),
+ GATE_INFRA2_INFRA(CLK_INFRA_52M_UART2_CK, "infra_f_52m_uart2",
+ CLK_INFRA_MUX_UART2_SEL, 5),
+ GATE_INFRA2_TOP(CLK_INFRA_NFI, "infra_f_fnfi", CLK_TOP_NFI1X_SEL, 9),
+ GATE_INFRA2_TOP(CLK_INFRA_SPINFI, "infra_f_fspinfi", CLK_TOP_SPINFI_SEL, 10),
+ GATE_INFRA2_TOP(CLK_INFRA_66M_NFI_HCK, "infra_hf_66m_nfi_hck",
+ CLK_TOP_SYSAXI_SEL, 11),
+ GATE_INFRA2_INFRA(CLK_INFRA_104M_SPI0, "infra_hf_104m_spi0",
+ CLK_INFRA_MUX_SPI0_SEL, 12),
+ GATE_INFRA2_INFRA(CLK_INFRA_104M_SPI1, "infra_hf_104m_spi1",
+ CLK_INFRA_MUX_SPI1_SEL, 13),
+ GATE_INFRA2_INFRA(CLK_INFRA_104M_SPI2_BCK, "infra_hf_104m_spi2_bck",
+ CLK_INFRA_MUX_SPI2_SEL, 14),
+ GATE_INFRA2_TOP(CLK_INFRA_66M_SPI0_HCK, "infra_hf_66m_spi0_hck",
+ CLK_TOP_SYSAXI_SEL, 15),
+ GATE_INFRA2_TOP(CLK_INFRA_66M_SPI1_HCK, "infra_hf_66m_spi1_hck",
+ CLK_TOP_SYSAXI_SEL, 16),
+ GATE_INFRA2_TOP(CLK_INFRA_66M_SPI2_HCK, "infra_hf_66m_spi2_hck",
+ CLK_TOP_SYSAXI_SEL, 17),
+ GATE_INFRA2_TOP(CLK_INFRA_66M_FLASHIF_AXI, "infra_hf_66m_flashif_axi",
+ CLK_TOP_SYSAXI_SEL, 18),
+ GATE_INFRA2_TOP(CLK_INFRA_RTC, "infra_f_frtc", CLK_TOP_RTC_32K, 19),
+ GATE_INFRA2_TOP(CLK_INFRA_26M_ADC_BCK, "infra_f_26m_adc_bck",
+ CLK_TOP_INFRA_F26M_SEL, 20),
+ GATE_INFRA2_INFRA(CLK_INFRA_RC_ADC, "infra_f_frc_adc", CLK_INFRA_26M_ADC_BCK,
+ 21),
+ GATE_INFRA2_TOP(CLK_INFRA_MSDC400, "infra_f_fmsdc400", CLK_TOP_EMMC_400M_SEL,
+ 22),
+ GATE_INFRA2_TOP(CLK_INFRA_MSDC2_HCK, "infra_f_fmsdc2_hck",
+ CLK_TOP_EMMC_250M_SEL, 23),
+ GATE_INFRA2_TOP(CLK_INFRA_133M_MSDC_0_HCK, "infra_hf_133m_msdc_0_hck",
+ CLK_TOP_SYSAXI_SEL, 24),
+ GATE_INFRA2_TOP(CLK_INFRA_66M_MSDC_0_HCK, "infra_66m_msdc_0_hck",
+ CLK_TOP_SYSAXI_SEL, 25),
+ GATE_INFRA2_TOP(CLK_INFRA_133M_CPUM_BCK, "infra_hf_133m_cpum_bck",
+ CLK_TOP_SYSAXI_SEL, 26),
+ GATE_INFRA2_TOP(CLK_INFRA_BIST2FPC, "infra_hf_fbist2fpc", CLK_TOP_NFI1X_SEL,
+ 27),
+ GATE_INFRA2_TOP(CLK_INFRA_I2C_X16W_MCK_CK_P1, "infra_hf_i2c_x16w_mck_ck_p1",
+ CLK_TOP_SYSAXI_SEL, 29),
+ GATE_INFRA2_TOP(CLK_INFRA_I2C_X16W_PCK_CK_P1, "infra_hf_i2c_x16w_pck_ck_p1",
+ CLK_TOP_SYSAXI_SEL, 31),
+ GATE_INFRA3_TOP(CLK_INFRA_133M_USB_HCK, "infra_133m_usb_hck",
+ CLK_TOP_SYSAXI_SEL, 0),
+ GATE_INFRA3_TOP(CLK_INFRA_133M_USB_HCK_CK_P1, "infra_133m_usb_hck_ck_p1",
+ CLK_TOP_SYSAXI_SEL, 1),
+ GATE_INFRA3_TOP(CLK_INFRA_66M_USB_HCK, "infra_66m_usb_hck",
+ CLK_TOP_SYSAXI_SEL, 2),
+ GATE_INFRA3_TOP(CLK_INFRA_66M_USB_HCK_CK_P1, "infra_66m_usb_hck_ck_p1",
+ CLK_TOP_SYSAXI_SEL, 3),
+ GATE_INFRA3_TOP(CLK_INFRA_USB_SYS, "infra_usb_sys", CLK_TOP_USB_SYS_SEL, 4),
+ GATE_INFRA3_TOP(CLK_INFRA_USB_SYS_CK_P1, "infra_usb_sys_ck_p1",
+ CLK_TOP_USB_SYS_P1_SEL, 5),
+ GATE_INFRA3_XTAL(CLK_INFRA_USB_REF, "infra_usb_ref", CLK_XTAL, 6),
+ GATE_INFRA3_XTAL(CLK_INFRA_USB_CK_P1, "infra_usb_ck_p1", CLK_XTAL,
+ 7),
+ GATE_INFRA3_TOP(CLK_INFRA_USB_FRMCNT, "infra_usb_frmcnt",
+ CLK_TOP_USB_FRMCNT_SEL, 8),
+ GATE_INFRA3_TOP(CLK_INFRA_USB_FRMCNT_CK_P1, "infra_usb_frmcnt_ck_p1",
+ CLK_TOP_USB_FRMCNT_P1_SEL, 9),
+ GATE_INFRA3_XTAL(CLK_INFRA_USB_PIPE, "infra_usb_pipe", CLK_XTAL,
+ 10),
+ GATE_INFRA3_XTAL(CLK_INFRA_USB_PIPE_CK_P1, "infra_usb_pipe_ck_p1",
+ CLK_XTAL, 11),
+ GATE_INFRA3_XTAL(CLK_INFRA_USB_UTMI, "infra_usb_utmi", CLK_XTAL,
+ 12),
+ GATE_INFRA3_XTAL(CLK_INFRA_USB_UTMI_CK_P1, "infra_usb_utmi_ck_p1",
+ CLK_XTAL, 13),
+ GATE_INFRA3_TOP(CLK_INFRA_USB_XHCI, "infra_usb_xhci", CLK_TOP_USB_XHCI_SEL,
+ 14),
+ GATE_INFRA3_TOP(CLK_INFRA_USB_XHCI_CK_P1, "infra_usb_xhci_ck_p1",
+ CLK_TOP_USB_XHCI_P1_SEL, 15),
+ GATE_INFRA3_INFRA(CLK_INFRA_PCIE_GFMUX_TL_P0, "infra_pcie_gfmux_tl_ck_p0",
+ CLK_INFRA_PCIE_GFMUX_TL_O_P0_SEL, 20),
+ GATE_INFRA3_INFRA(CLK_INFRA_PCIE_GFMUX_TL_P1, "infra_pcie_gfmux_tl_ck_p1",
+ CLK_INFRA_PCIE_GFMUX_TL_O_P1_SEL, 21),
+ GATE_INFRA3_INFRA(CLK_INFRA_PCIE_GFMUX_TL_P2, "infra_pcie_gfmux_tl_ck_p2",
+ CLK_INFRA_PCIE_GFMUX_TL_O_P2_SEL, 22),
+ GATE_INFRA3_INFRA(CLK_INFRA_PCIE_GFMUX_TL_P3, "infra_pcie_gfmux_tl_ck_p3",
+ CLK_INFRA_PCIE_GFMUX_TL_O_P3_SEL, 23),
+ GATE_INFRA3_XTAL(CLK_INFRA_PCIE_PIPE_P0, "infra_pcie_pipe_ck_p0",
+ CLK_XTAL, 24),
+ GATE_INFRA3_XTAL(CLK_INFRA_PCIE_PIPE_P1, "infra_pcie_pipe_ck_p1",
+ CLK_XTAL, 25),
+ GATE_INFRA3_XTAL(CLK_INFRA_PCIE_PIPE_P2, "infra_pcie_pipe_ck_p2",
+ CLK_XTAL, 26),
+ GATE_INFRA3_XTAL(CLK_INFRA_PCIE_PIPE_P3, "infra_pcie_pipe_ck_p3",
+ CLK_XTAL, 27),
+ GATE_INFRA3_TOP(CLK_INFRA_133M_PCIE_CK_P0, "infra_133m_pcie_ck_p0",
+ CLK_TOP_SYSAXI_SEL, 28),
+ GATE_INFRA3_TOP(CLK_INFRA_133M_PCIE_CK_P1, "infra_133m_pcie_ck_p1",
+ CLK_TOP_SYSAXI_SEL, 29),
+ GATE_INFRA3_TOP(CLK_INFRA_133M_PCIE_CK_P2, "infra_133m_pcie_ck_p2",
+ CLK_TOP_SYSAXI_SEL, 30),
+ GATE_INFRA3_TOP(CLK_INFRA_133M_PCIE_CK_P3, "infra_133m_pcie_ck_p3",
+ CLK_TOP_SYSAXI_SEL, 31),
};
static const struct mtk_clk_tree mt7988_fixed_pll_clk_tree = {
.fdivs_offs = ARRAY_SIZE(apmixedsys_mtk_plls),
.fclks = apmixedsys_mtk_plls,
+ .flags = CLK_APMIXED,
.xtal_rate = 40 * MHZ,
};
static const struct mtk_clk_tree mt7988_topckgen_clk_tree = {
- .fdivs_offs = CK_TOP_CB_CKSQ_40M,
- .muxes_offs = CK_TOP_NETSYS_SEL,
+ .fdivs_offs = CLK_TOP_XTAL_D2,
+ .muxes_offs = CLK_TOP_NETSYS_SEL,
+ .fclks = topckgen_mtk_fixed_clks,
.fdivs = topckgen_mtk_fixed_factors,
.muxes = topckgen_mtk_muxes,
- .flags = CLK_BYPASS_XTAL,
+ .flags = CLK_BYPASS_XTAL | CLK_TOPCKGEN,
.xtal_rate = 40 * MHZ,
};
static const struct mtk_clk_tree mt7988_infracfg_clk_tree = {
- .fdivs_offs = CK_INFRA_CK_F26M,
- .muxes_offs = CK_INFRA_MUX_UART0_SEL,
- .fdivs = infracfg_mtk_fixed_factor,
+ .muxes_offs = CLK_INFRA_MUX_UART0_SEL,
+ .gates_offs = CLK_INFRA_PCIE_PERI_26M_CK_P0,
.muxes = infracfg_mtk_mux,
+ .gates = infracfg_mtk_gates,
.flags = CLK_BYPASS_XTAL,
.xtal_rate = 40 * MHZ,
};
@@ -884,22 +848,11 @@
{}
};
-static const struct udevice_id mt7988_infracfg_ao_cgs_compat[] = {
- { .compatible = "mediatek,mt7988-infracfg_ao_cgs" },
- {}
-};
-
static int mt7988_infracfg_probe(struct udevice *dev)
{
- return mtk_common_clk_init(dev, &mt7988_infracfg_clk_tree);
+ return mtk_common_clk_infrasys_init(dev, &mt7988_infracfg_clk_tree);
}
-static int mt7988_infracfg_ao_cgs_probe(struct udevice *dev)
-{
- return mtk_common_clk_gate_init(dev, &mt7988_infracfg_clk_tree,
- infracfg_mtk_gates);
-}
-
U_BOOT_DRIVER(mtk_clk_infracfg) = {
.name = "mt7988-clock-infracfg",
.id = UCLASS_CLK,
@@ -910,16 +863,6 @@
.flags = DM_FLAG_PRE_RELOC,
};
-U_BOOT_DRIVER(mtk_clk_infracfg_ao_cgs) = {
- .name = "mt7988-clock-infracfg_ao_cgs",
- .id = UCLASS_CLK,
- .of_match = mt7988_infracfg_ao_cgs_compat,
- .probe = mt7988_infracfg_ao_cgs_probe,
- .priv_auto = sizeof(struct mtk_cg_priv),
- .ops = &mtk_clk_gate_ops,
- .flags = DM_FLAG_PRE_RELOC,
-};
-
/* ETHDMA */
static const struct mtk_gate_regs ethdma_cg_regs = {
@@ -936,7 +879,7 @@
}
static const struct mtk_gate ethdma_mtk_gate[] = {
- GATE_ETHDMA(CK_ETHDMA_FE_EN, "ethdma_fe_en", CK_TOP_NETSYS_2X, 6),
+ GATE_ETHDMA(CLK_ETHDMA_FE_EN, "ethdma_fe_en", CLK_TOP_NETSYS_2X_SEL, 6),
};
static int mt7988_ethdma_probe(struct udevice *dev)
@@ -991,10 +934,10 @@
}
static const struct mtk_gate sgmiisys_0_mtk_gate[] = {
- /* connect to fake clock, so use CK_TOP_CB_CKSQ_40M as the clock parent */
- GATE_SGMII0(CK_SGM0_TX_EN, "sgm0_tx_en", CK_TOP_CB_CKSQ_40M, 2),
- /* connect to fake clock, so use CK_TOP_CB_CKSQ_40M as the clock parent */
- GATE_SGMII0(CK_SGM0_RX_EN, "sgm0_rx_en", CK_TOP_CB_CKSQ_40M, 3),
+ /* connect to fake clock, so use CLK_TOP_XTAL as the clock parent */
+ GATE_SGMII0(CLK_SGM0_TX_EN, "sgm0_tx_en", CLK_TOP_XTAL, 2),
+ /* connect to fake clock, so use CLK_TOP_XTAL as the clock parent */
+ GATE_SGMII0(CLK_SGM0_RX_EN, "sgm0_rx_en", CLK_TOP_XTAL, 3),
};
static int mt7988_sgmiisys_0_probe(struct udevice *dev)
@@ -1035,10 +978,10 @@
}
static const struct mtk_gate sgmiisys_1_mtk_gate[] = {
- /* connect to fake clock, so use CK_TOP_CB_CKSQ_40M as the clock parent */
- GATE_SGMII1(CK_SGM1_TX_EN, "sgm1_tx_en", CK_TOP_CB_CKSQ_40M, 2),
- /* connect to fake clock, so use CK_TOP_CB_CKSQ_40M as the clock parent */
- GATE_SGMII1(CK_SGM1_RX_EN, "sgm1_rx_en", CK_TOP_CB_CKSQ_40M, 3),
+ /* connect to fake clock, so use CLK_TOP_XTAL as the clock parent */
+ GATE_SGMII1(CLK_SGM1_TX_EN, "sgm1_tx_en", CLK_TOP_XTAL, 2),
+ /* connect to fake clock, so use CLK_TOP_XTAL as the clock parent */
+ GATE_SGMII1(CLK_SGM1_RX_EN, "sgm1_rx_en", CLK_TOP_XTAL, 3),
};
static int mt7988_sgmiisys_1_probe(struct udevice *dev)
@@ -1079,12 +1022,12 @@
}
static const struct mtk_gate ethwarp_mtk_gate[] = {
- GATE_ETHWARP(CK_ETHWARP_WOCPU2_EN, "ethwarp_wocpu2_en",
- CK_TOP_NETSYS_WED_MCU, 13),
- GATE_ETHWARP(CK_ETHWARP_WOCPU1_EN, "ethwarp_wocpu1_en",
- CK_TOP_NETSYS_WED_MCU, 14),
- GATE_ETHWARP(CK_ETHWARP_WOCPU0_EN, "ethwarp_wocpu0_en",
- CK_TOP_NETSYS_WED_MCU, 15),
+ GATE_ETHWARP(CLK_ETHWARP_WOCPU2_EN, "ethwarp_wocpu2_en",
+ CLK_TOP_NETSYS_MCU_SEL, 13),
+ GATE_ETHWARP(CLK_ETHWARP_WOCPU1_EN, "ethwarp_wocpu1_en",
+ CLK_TOP_NETSYS_MCU_SEL, 14),
+ GATE_ETHWARP(CLK_ETHWARP_WOCPU0_EN, "ethwarp_wocpu0_en",
+ CLK_TOP_NETSYS_MCU_SEL, 15),
};
static int mt7988_ethwarp_probe(struct udevice *dev)
diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c
index 31091bb..888dfb7 100644
--- a/drivers/ddr/fsl/main.c
+++ b/drivers/ddr/fsl/main.c
@@ -111,7 +111,7 @@
#if CONFIG_IS_ENABLED(DM_I2C)
ret = dm_i2c_read(dev, 0, buf, len);
#else
- ret = i2c_read(dev->chip, addr, alen, buf, len);
+ ret = 0;
#endif
return ret;
@@ -162,7 +162,6 @@
};
dev = &ldev;
- i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
#endif
#ifdef CONFIG_SYS_FSL_DDR4
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index cba7f84..52067fa 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -650,7 +650,7 @@
config SYS_I2C_S3C24X0
bool "Samsung I2C driver"
- depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && DM_I2C
+ depends on DM_I2C
help
Support for Samsung I2C controller as Samsung SoCs.
diff --git a/drivers/i2c/exynos_hs_i2c.c b/drivers/i2c/exynos_hs_i2c.c
index 2ab0bae..fa0d1c8 100644
--- a/drivers/i2c/exynos_hs_i2c.c
+++ b/drivers/i2c/exynos_hs_i2c.c
@@ -9,11 +9,15 @@
#include <dm.h>
#include <i2c.h>
#include <log.h>
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#include <asm/arch/pinmux.h>
+#endif
#include <asm/global_data.h>
+#include <asm/io.h>
#include <linux/delay.h>
+#include <clk.h>
#include "s3c24x0_i2c.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -137,18 +141,25 @@
return I2C_NOK_TOUT;
}
-static int hsi2c_get_clk_details(struct s3c24x0_i2c_bus *i2c_bus)
+static int hsi2c_get_clk_details(struct udevice *dev)
{
+ struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
struct exynos5_hsi2c *hsregs = i2c_bus->hsregs;
ulong clkin;
unsigned int op_clk = i2c_bus->clock_frequency;
unsigned int i = 0, utemp0 = 0, utemp1 = 0;
unsigned int t_ftl_cycle;
-#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5)
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
clkin = get_i2c_clk();
#else
- clkin = get_PCLK();
+ struct clk clk;
+ int ret;
+
+ ret = clk_get_by_name(dev, "hsi2c", &clk);
+ if (ret < 0)
+ return ret;
+ clkin = clk_get_rate(&clk);
#endif
/* FPCLK / FI2C =
* (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE
@@ -491,7 +502,7 @@
i2c_bus->clock_frequency = speed;
- if (hsi2c_get_clk_details(i2c_bus))
+ if (hsi2c_get_clk_details(dev))
return -EFAULT;
hsi2c_ch_init(i2c_bus);
@@ -518,7 +529,9 @@
static int s3c_i2c_of_to_plat(struct udevice *dev)
{
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
const void *blob = gd->fdt_blob;
+#endif
struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
int node;
@@ -526,7 +539,9 @@
i2c_bus->hsregs = dev_read_addr_ptr(dev);
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
i2c_bus->id = pinmux_decode_periph_id(blob, node);
+#endif
i2c_bus->clock_frequency =
dev_read_u32_default(dev, "clock-frequency",
@@ -534,7 +549,9 @@
i2c_bus->node = node;
i2c_bus->bus_num = dev_seq(dev);
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
exynos_pinmux_config(i2c_bus->id, PINMUX_FLAG_HS_MODE);
+#endif
i2c_bus->active = true;
diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c
index 7c43a55..cccd450 100644
--- a/drivers/i2c/i2c_core.c
+++ b/drivers/i2c/i2c_core.c
@@ -33,137 +33,8 @@
return i2c_adap_p;
}
-#if !defined(CFG_SYS_I2C_DIRECT_BUS)
-struct i2c_bus_hose i2c_bus[CFG_SYS_NUM_I2C_BUSES] =
- CFG_SYS_I2C_BUSES;
-#endif
-
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CFG_SYS_I2C_DIRECT_BUS
-/*
- * i2c_mux_set()
- * -------------
- *
- * This turns on the given channel on I2C multiplexer chip connected to
- * a given I2C adapter directly or via other multiplexers. In the latter
- * case the entire multiplexer chain must be initialized first starting
- * with the one connected directly to the adapter. When disabling a chain
- * muxes must be programmed in reverse order, starting with the one
- * farthest from the adapter.
- *
- * mux_id is the multiplexer chip type from defined in i2c.h. So far only
- * NXP (Philips) PCA954x multiplexers are supported. Switches are NOT
- * supported (anybody uses them?)
- */
-
-static int i2c_mux_set(struct i2c_adapter *adap, int mux_id, int chip,
- int channel)
-{
- uint8_t buf;
- int ret;
-
- /* channel < 0 - turn off the mux */
- if (channel < 0) {
- buf = 0;
- ret = adap->write(adap, chip, 0, 0, &buf, 1);
- if (ret)
- printf("%s: Could not turn off the mux.\n", __func__);
- return ret;
- }
-
- switch (mux_id) {
- case I2C_MUX_PCA9540_ID:
- case I2C_MUX_PCA9542_ID:
- if (channel > 1)
- return -1;
- buf = (uint8_t)((channel & 0x01) | (1 << 2));
- break;
- case I2C_MUX_PCA9544_ID:
- if (channel > 3)
- return -1;
- buf = (uint8_t)((channel & 0x03) | (1 << 2));
- break;
- case I2C_MUX_PCA9547_ID:
- if (channel > 7)
- return -1;
- buf = (uint8_t)((channel & 0x07) | (1 << 3));
- break;
- case I2C_MUX_PCA9548_ID:
- if (channel > 7)
- return -1;
- buf = (uint8_t)(0x01 << channel);
- break;
- default:
- printf("%s: wrong mux id: %d\n", __func__, mux_id);
- return -1;
- }
-
- ret = adap->write(adap, chip, 0, 0, &buf, 1);
- if (ret)
- printf("%s: could not set mux: id: %d chip: %x channel: %d\n",
- __func__, mux_id, chip, channel);
- return ret;
-}
-
-static int i2c_mux_set_all(void)
-{
- struct i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS];
- int i;
-
- /* Connect requested bus if behind muxes */
- if (i2c_bus_tmp->next_hop[0].chip != 0) {
- /* Set all muxes along the path to that bus */
- for (i = 0; i < CFG_SYS_I2C_MAX_HOPS; i++) {
- int ret;
-
- if (i2c_bus_tmp->next_hop[i].chip == 0)
- break;
-
- ret = i2c_mux_set(I2C_ADAP,
- i2c_bus_tmp->next_hop[i].mux.id,
- i2c_bus_tmp->next_hop[i].chip,
- i2c_bus_tmp->next_hop[i].channel);
- if (ret != 0)
- return ret;
- }
- }
- return 0;
-}
-
-static int i2c_mux_disconnect_all(void)
-{
- struct i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS];
- int i;
- uint8_t buf = 0;
-
- if (I2C_ADAP->init_done == 0)
- return 0;
-
- /* Disconnect current bus (turn off muxes if any) */
- if ((i2c_bus_tmp->next_hop[0].chip != 0) &&
- (I2C_ADAP->init_done != 0)) {
- i = CFG_SYS_I2C_MAX_HOPS;
- do {
- uint8_t chip;
- int ret;
-
- chip = i2c_bus_tmp->next_hop[--i].chip;
- if (chip == 0)
- continue;
-
- ret = I2C_ADAP->write(I2C_ADAP, chip, 0, 0, &buf, 1);
- if (ret != 0) {
- printf("i2c: mux disconnect error\n");
- return ret;
- }
- } while (i > 0);
- }
-
- return 0;
-}
-#endif
-
/*
* i2c_init_bus():
* ---------------
@@ -237,11 +108,6 @@
if ((bus == I2C_BUS) && (I2C_ADAP->init_done > 0))
return 0;
-#ifndef CFG_SYS_I2C_DIRECT_BUS
- if (bus >= CFG_SYS_NUM_I2C_BUSES)
- return -1;
-#endif
-
max = ll_entry_count(struct i2c_adapter, i2c);
if (I2C_ADAPTER(bus) >= max) {
printf("Error, wrong i2c adapter %d max %d possible\n",
@@ -249,17 +115,10 @@
return -2;
}
-#ifndef CFG_SYS_I2C_DIRECT_BUS
- i2c_mux_disconnect_all();
-#endif
-
gd->cur_i2c_bus = bus;
if (I2C_ADAP->init_done == 0)
i2c_init_bus(bus, I2C_ADAP->speed, I2C_ADAP->slaveaddr);
-#ifndef CFG_SYS_I2C_DIRECT_BUS
- i2c_mux_set_all();
-#endif
return 0;
}
diff --git a/drivers/i2c/imx_lpi2c.c b/drivers/i2c/imx_lpi2c.c
index a1be841..4636da9 100644
--- a/drivers/i2c/imx_lpi2c.c
+++ b/drivers/i2c/imx_lpi2c.c
@@ -19,7 +19,10 @@
#define LPI2C_NACK_TOUT_MS 1
#define LPI2C_TIMEOUT_MS 100
-static int bus_i2c_init(struct udevice *bus, int speed);
+#define LPI2C_CHUNK_DATA 256U
+#define LPI2C_CHUNK_LEN_MIN 1U
+
+static int bus_i2c_init(struct udevice *bus);
/* Weak linked function for overridden by some SoC power function */
int __weak init_i2c_power(unsigned i2c_num)
@@ -118,8 +121,10 @@
static int bus_i2c_receive(struct udevice *bus, u8 *rxbuf, int len)
{
+ struct dm_i2c_bus *i2c = dev_get_uclass_priv(bus);
struct imx_lpi2c_bus *i2c_bus = dev_get_priv(bus);
struct imx_lpi2c_reg *regs = (struct imx_lpi2c_reg *)(i2c_bus->base);
+ unsigned int chunk_len, rx_remain, timeout;
lpi2c_status_t result = LPI2C_SUCESS;
u32 val;
ulong start_time = get_timer(0);
@@ -128,33 +133,50 @@
if (!len)
return result;
- result = bus_i2c_wait_for_tx_ready(regs);
- if (result) {
- debug("i2c: receive wait fot tx ready: %d\n", result);
- return result;
- }
+ /*
+ * Extend the timeout for a bulk read if needed.
+ * The calculated timeout is the result of multiplying the
+ * transfer length with 8 bit + ACK + one clock of extra time,
+ * considering the I2C bus frequency.
+ */
+ timeout = max(len * 10 * 1000 / i2c->speed_hz, LPI2C_TIMEOUT_MS);
- /* clear all status flags */
- writel(0x7f00, ®s->msr);
- /* send receive command */
- val = LPI2C_MTDR_CMD(0x1) | LPI2C_MTDR_DATA(len - 1);
- writel(val, ®s->mtdr);
+ rx_remain = len;
+ while (rx_remain > 0) {
+ chunk_len = clamp(rx_remain, LPI2C_CHUNK_LEN_MIN, LPI2C_CHUNK_DATA) - 1;
- while (len--) {
- do {
- result = imx_lpci2c_check_clear_error(regs);
- if (result) {
- debug("i2c: receive check clear error: %d\n",
- result);
- return result;
- }
- if (get_timer(start_time) > LPI2C_TIMEOUT_MS) {
- debug("i2c: receive mrdr: timeout\n");
- return -1;
- }
- val = readl(®s->mrdr);
- } while (val & LPI2C_MRDR_RXEMPTY_MASK);
- *rxbuf++ = LPI2C_MRDR_DATA(val);
+ result = bus_i2c_wait_for_tx_ready(regs);
+ if (result) {
+ debug("i2c: receive wait for tx ready: %d\n", result);
+ return result;
+ }
+
+ /* clear all status flags */
+ writel(0x7f00, ®s->msr);
+ /* send receive command */
+ writel(LPI2C_MTDR_CMD(0x1) | LPI2C_MTDR_DATA(chunk_len), ®s->mtdr);
+ rx_remain = rx_remain - (chunk_len & 0xff) - 1;
+
+ while (len--) {
+ do {
+ result = imx_lpci2c_check_clear_error(regs);
+ if (result) {
+ debug("i2c: receive check clear error: %d\n",
+ result);
+ return result;
+ }
+ if (get_timer(start_time) > timeout) {
+ debug("i2c: receive mrdr: timeout\n");
+ return -1;
+ }
+ val = readl(®s->mrdr);
+ } while (val & LPI2C_MRDR_RXEMPTY_MASK);
+ *rxbuf++ = LPI2C_MRDR_DATA(val);
+
+ /* send next receive command before controller NACKs last byte */
+ if ((len - rx_remain) < 2 && rx_remain > 0)
+ break;
+ }
}
return result;
@@ -172,7 +194,7 @@
debug("i2c: start check busy bus: 0x%x\n", result);
/* Try to init the lpi2c then check the bus busy again */
- bus_i2c_init(bus, I2C_SPEED_STANDARD_RATE);
+ bus_i2c_init(bus);
result = imx_lpci2c_check_busy_bus(regs);
if (result) {
printf("i2c: Error check busy bus: 0x%x\n", result);
@@ -344,11 +366,14 @@
return 0;
}
-static int bus_i2c_init(struct udevice *bus, int speed)
+static int bus_i2c_init(struct udevice *bus)
{
u32 val;
int ret;
+ struct dm_i2c_bus *i2c = dev_get_uclass_priv(bus);
+ int speed = i2c->speed_hz;
+
struct imx_lpi2c_bus *i2c_bus = dev_get_priv(bus);
struct imx_lpi2c_reg *regs = (struct imx_lpi2c_reg *)(i2c_bus->base);
/* reset peripheral */
@@ -388,13 +413,13 @@
result = bus_i2c_start(bus, chip, 0);
if (result) {
bus_i2c_stop(bus);
- bus_i2c_init(bus, I2C_SPEED_STANDARD_RATE);
+ bus_i2c_init(bus);
return result;
}
result = bus_i2c_stop(bus);
if (result)
- bus_i2c_init(bus, I2C_SPEED_STANDARD_RATE);
+ bus_i2c_init(bus);
return result;
}
@@ -489,7 +514,7 @@
return ret;
}
- ret = bus_i2c_init(bus, I2C_SPEED_STANDARD_RATE);
+ ret = bus_i2c_init(bus);
if (ret < 0)
return ret;
diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
index a83d7cb..3d2ce0c 100644
--- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
+++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
@@ -54,7 +54,7 @@
/* Indicate that we want to claim the bus */
ret = dm_gpio_set_value(&priv->ap_claim, 1);
if (ret)
- goto err;
+ return ret;
udelay(priv->slew_delay_us);
/* Wait for the EC to release it */
@@ -62,7 +62,7 @@
while (get_timer(start_retry) < priv->wait_retry_ms) {
ret = dm_gpio_get_value(&priv->ec_claim);
if (ret < 0) {
- goto err;
+ return ret;
} else if (!ret) {
/* We got it, so return */
return 0;
@@ -75,17 +75,14 @@
/* It didn't release, so give up, wait, and try again */
ret = dm_gpio_set_value(&priv->ap_claim, 0);
if (ret)
- goto err;
+ return ret;
mdelay(priv->wait_retry_ms);
} while (get_timer(start) < priv->wait_free_ms);
/* Give up, release our claim */
printf("I2C: Could not claim bus, timeout %lu\n", get_timer(start));
- ret = -ETIMEDOUT;
- ret = 0;
-err:
- return ret;
+ return -ETIMEDOUT;
}
static int i2c_arbitrator_probe(struct udevice *dev)
diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c
index b4e3e16..795288f 100644
--- a/drivers/i2c/muxes/pca954x.c
+++ b/drivers/i2c/muxes/pca954x.c
@@ -10,12 +10,9 @@
#include <i2c.h>
#include <log.h>
#include <malloc.h>
-#include <asm/global_data.h>
#include <asm-generic/gpio.h>
-DECLARE_GLOBAL_DATA_PTR;
-
enum pca_type {
PCA9543,
PCA9544,
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 84c0050..2f3cb59 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -620,6 +620,7 @@
__attribute__((weak, alias("__enable_i2c_clk")));
#if !CONFIG_IS_ENABLED(DM_I2C)
+
/*
* Read data from I2C device
*
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index 72d2ab0..ade1ad6 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -8,17 +8,16 @@
#include <dm.h>
#include <fdtdec.h>
#include <time.h>
-#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5)
#include <log.h>
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#include <asm/arch/pinmux.h>
-#else
-#include <asm/arch/s3c24x0_cpu.h>
#endif
#include <asm/global_data.h>
#include <asm/io.h>
#include <i2c.h>
+#include <clk.h>
#include "s3c24x0_i2c.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -50,13 +49,22 @@
clrbits_le32(&i2c->iiccon, I2CCON_IRPND);
}
-static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd)
+static int i2c_ch_init(struct udevice *dev, int speed, int slaveadd)
{
+ struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
+ struct s3c24x0_i2c *i2c = i2c_bus->regs;
ulong freq, pres = 16, div;
-#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5)
+
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5)
freq = get_i2c_clk();
#else
- freq = get_PCLK();
+ struct clk clk;
+ int ret;
+
+ ret = clk_get_by_name(dev, "i2c", &clk);
+ if (ret < 0)
+ return ret;
+ freq = clk_get_rate(&clk);
#endif
/* calculate prescaler and divisor values */
if ((freq / pres / (16 + 1)) > speed)
@@ -75,6 +83,7 @@
writel(slaveadd, &i2c->iicadd);
/* program Master Transmit (and implicit STOP) */
writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat);
+ return 0;
}
#define SYS_I2C_S3C24X0_SLAVE_ADDR 0
@@ -85,8 +94,9 @@
i2c_bus->clock_frequency = speed;
- i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency,
- SYS_I2C_S3C24X0_SLAVE_ADDR);
+ if (i2c_ch_init(dev, i2c_bus->clock_frequency,
+ SYS_I2C_S3C24X0_SLAVE_ADDR))
+ return -EFAULT;
return 0;
}
@@ -301,7 +311,9 @@
static int s3c_i2c_of_to_plat(struct udevice *dev)
{
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
const void *blob = gd->fdt_blob;
+#endif
struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
int node;
@@ -309,7 +321,9 @@
i2c_bus->regs = dev_read_addr_ptr(dev);
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
i2c_bus->id = pinmux_decode_periph_id(blob, node);
+#endif
i2c_bus->clock_frequency =
dev_read_u32_default(dev, "clock-frequency",
@@ -317,7 +331,9 @@
i2c_bus->node = node;
i2c_bus->bus_num = dev_seq(dev);
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
exynos_pinmux_config(i2c_bus->id, 0);
+#endif
i2c_bus->active = true;
diff --git a/drivers/i2c/s3c24x0_i2c.h b/drivers/i2c/s3c24x0_i2c.h
index ec8f1ac..12249d5 100644
--- a/drivers/i2c/s3c24x0_i2c.h
+++ b/drivers/i2c/s3c24x0_i2c.h
@@ -54,7 +54,9 @@
struct exynos5_hsi2c *hsregs;
int is_highspeed; /* High speed type, rather than I2C */
unsigned clock_frequency;
+#if IS_ENABLED(CONFIG_ARCH_EXYNOS4) || IS_ENABLED(CONFIG_ARCH_EXYNOS5)
int id;
+#endif
unsigned clk_cycle;
unsigned clk_div;
};
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 89ddf82..79f7a32 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -107,16 +107,13 @@
/*-----------------------------------------------------------------------
* Local functions
*/
-#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
static void send_reset (void);
-#endif
static void send_start (void);
static void send_stop (void);
static void send_ack (int);
static int write_byte (uchar byte);
static uchar read_byte (int);
-#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
/*-----------------------------------------------------------------------
* Send a reset sequence consisting of 9 clocks with the data signal high
* to clock any confused device back into an idle state. Also send a
@@ -144,7 +141,6 @@
send_stop();
I2C_TRISTATE;
}
-#endif
/*-----------------------------------------------------------------------
* START: High -> Low on SDA while SCL is High
@@ -277,12 +273,6 @@
*/
static void soft_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
{
-#if defined(CONFIG_SYS_I2C_INIT_BOARD)
- /* call board specific i2c bus reset routine before accessing the */
- /* environment, which might be in a chip on that bus. For details */
- /* about this problem see doc/I2C_Edge_Conditions. */
- i2c_init_board();
-#else
/*
* WARNING: Do NOT save speed in a static variable: if the
* I2C routines are called before RAM is initialized (to read
@@ -290,7 +280,6 @@
* system will crash.
*/
send_reset ();
-#endif
}
/*-----------------------------------------------------------------------
diff --git a/drivers/misc/rockchip-io-domain.c b/drivers/misc/rockchip-io-domain.c
index cf4f7c3..025b604 100644
--- a/drivers/misc/rockchip-io-domain.c
+++ b/drivers/misc/rockchip-io-domain.c
@@ -31,6 +31,10 @@
#define PX30_IO_VSEL_VCCIO6_SRC BIT(0)
#define PX30_IO_VSEL_VCCIO6_SUPPLY_NUM 1
+#define RK3308_SOC_CON0 0x300
+#define RK3308_SOC_CON0_VCCIO3 BIT(8)
+#define RK3308_SOC_VCCIO3_SUPPLY_NUM 3
+
#define RK3328_SOC_CON4 0x410
#define RK3328_SOC_CON4_VCCIO2 BIT(7)
#define RK3328_SOC_VCCIO2_SUPPLY_NUM 1
@@ -119,6 +123,22 @@
return ret;
}
+static int rk3308_iodomain_write(struct regmap *grf, uint offset, int idx, int uV)
+{
+ int ret = rockchip_iodomain_write(grf, offset, idx, uV);
+
+ if (!ret && idx == RK3308_SOC_VCCIO3_SUPPLY_NUM) {
+ /*
+ * set vccio3 iodomain to also use this framework
+ * instead of a special gpio.
+ */
+ u32 val = RK3308_SOC_CON0_VCCIO3 | (RK3308_SOC_CON0_VCCIO3 << 16);
+ ret = regmap_write(grf, RK3308_SOC_CON0, val);
+ }
+
+ return ret;
+}
+
static int rk3328_iodomain_write(struct regmap *grf, uint offset, int idx, int uV)
{
int ret = rockchip_iodomain_write(grf, offset, idx, uV);
@@ -189,6 +209,19 @@
.write = rockchip_iodomain_write,
};
+static const struct rockchip_iodomain_soc_data soc_data_rk3308 = {
+ .grf_offset = 0x300,
+ .supply_names = {
+ "vccio0-supply",
+ "vccio1-supply",
+ "vccio2-supply",
+ "vccio3-supply",
+ "vccio4-supply",
+ "vccio5-supply",
+ },
+ .write = rk3308_iodomain_write,
+};
+
static const struct rockchip_iodomain_soc_data soc_data_rk3328 = {
.grf_offset = 0x410,
.supply_names = {
@@ -257,6 +290,10 @@
.data = (ulong)&soc_data_px30_pmu,
},
{
+ .compatible = "rockchip,rk3308-io-voltage-domain",
+ .data = (ulong)&soc_data_rk3308,
+ },
+ {
.compatible = "rockchip,rk3328-io-voltage-domain",
.data = (ulong)&soc_data_rk3328,
},
diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c
index 1a10b70..549fb80 100644
--- a/drivers/mmc/rockchip_dw_mmc.c
+++ b/drivers/mmc/rockchip_dw_mmc.c
@@ -159,6 +159,10 @@
host->mmc->dev = dev;
upriv->mmc = host->mmc;
+ /* Hosts capable of 8-bit can also do 4 bits */
+ if (host->buswidth == 8)
+ plat->cfg.host_caps |= MMC_MODE_4BIT;
+
return dwmci_probe(dev);
}
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 4fdc964..3764e25 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -2,6 +2,7 @@
config MTD_PARTITIONS
bool
+ select PARTITIONS
config MTD
bool "Enable MTD layer"
@@ -31,6 +32,13 @@
into a single logical device. The larger logical device can then
be partitioned.
+config MTD_BLOCK
+ bool "Enable block device access to MTD devices"
+ depends on BLK
+ help
+ Enable support for block device access to MTD devices
+ using blk_ops abstraction.
+
config SYS_MTDPARTS_RUNTIME
bool "Allow MTDPARTS to be configured at runtime"
help
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index c2fc80b..10d575e 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -26,6 +26,7 @@
obj-y += spi/
obj-$(CONFIG_MTD_UBI) += ubi/
obj-$(CONFIG_NVMXIP) += nvmxip/
+obj-$(CONFIG_MTD_BLOCK) += mtdblock.o
#SPL/TPL build
else
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
new file mode 100644
index 0000000..66a79b8
--- /dev/null
+++ b/drivers/mtd/mtdblock.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MTD block - abstraction over MTD subsystem, allowing
+ * to read and write in blocks using BLK UCLASS.
+ *
+ * - Read algorithm:
+ *
+ * 1. Convert start block number to start address.
+ * 2. Read block_dev->blksz bytes using mtd_read() and
+ * add to start address pointer block_dev->blksz bytes,
+ * until the requested number of blocks have been read.
+ *
+ * - Write algorithm:
+ *
+ * 1. Convert start block number to start address.
+ * 2. Round this address down by mtd->erasesize.
+ *
+ * Erase addr Start addr
+ * | |
+ * v v
+ * +----------------+----------------+----------------+
+ * | blksz | blksz | blksz |
+ * +----------------+----------------+----------------+
+ *
+ * 3. Calculate offset between this two addresses.
+ * 4. Read mtd->erasesize bytes using mtd_read() into
+ * temporary buffer from erase address.
+ *
+ * Erase addr Start addr
+ * | |
+ * v v
+ * +----------------+----------------+----------------+
+ * | blksz | blksz | blksz |
+ * +----------------+----------------+----------------+
+ * ^
+ * |
+ * |
+ * mtd_read()
+ * from here
+ *
+ * 5. Copy data from user buffer to temporary buffer with offset,
+ * calculated at step 3.
+ * 6. Erase and write mtd->erasesize bytes at erase address
+ * pointer using mtd_erase/mtd_write().
+ * 7. Add to erase address pointer mtd->erasesize bytes.
+ * 8. goto 1 until the requested number of blocks have
+ * been written.
+ *
+ * (C) Copyright 2024 SaluteDevices, Inc.
+ *
+ * Author: Alexey Romanov <avromanov@salutedevices.com>
+ */
+
+#include <blk.h>
+#include <part.h>
+#include <dm/device.h>
+#include <dm/device-internal.h>
+#include <linux/mtd/mtd.h>
+
+int mtd_bind(struct udevice *dev, struct mtd_info **mtd)
+{
+ struct blk_desc *bdesc;
+ struct udevice *bdev;
+ int ret;
+
+ ret = blk_create_devicef(dev, "mtd_blk", "blk", UCLASS_MTD,
+ -1, 512, 0, &bdev);
+ if (ret) {
+ pr_err("Cannot create block device\n");
+ return ret;
+ }
+
+ bdesc = dev_get_uclass_plat(bdev);
+ dev_set_priv(bdev, mtd);
+ bdesc->bdev = bdev;
+ bdesc->part_type = PART_TYPE_MTD;
+
+ return 0;
+}
+
+static ulong mtd_blk_read(struct udevice *dev, lbaint_t start, lbaint_t blkcnt,
+ void *dst)
+{
+ struct blk_desc *block_dev = dev_get_uclass_plat(dev);
+ struct mtd_info *mtd = blk_desc_to_mtd(block_dev);
+ unsigned int sect_size = block_dev->blksz;
+ lbaint_t cur = start;
+ ulong read_cnt = 0;
+
+ while (read_cnt < blkcnt) {
+ int ret;
+ loff_t sect_start = cur * sect_size;
+ size_t retlen;
+
+ ret = mtd_read(mtd, sect_start, sect_size, &retlen, dst);
+ if (ret)
+ return ret;
+
+ if (retlen != sect_size) {
+ pr_err("mtdblock: failed to read block 0x" LBAF "\n", cur);
+ return -EIO;
+ }
+
+ cur++;
+ dst += sect_size;
+ read_cnt++;
+ }
+
+ return read_cnt;
+}
+
+static int mtd_erase_write(struct mtd_info *mtd, uint64_t start, const void *src)
+{
+ int ret;
+ size_t retlen;
+ struct erase_info erase = { 0 };
+
+ erase.mtd = mtd;
+ erase.addr = start;
+ erase.len = mtd->erasesize;
+
+ ret = mtd_erase(mtd, &erase);
+ if (ret)
+ return ret;
+
+ ret = mtd_write(mtd, start, mtd->erasesize, &retlen, src);
+ if (ret)
+ return ret;
+
+ if (retlen != mtd->erasesize) {
+ pr_err("mtdblock: failed to read block at 0x%llx\n", start);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static ulong mtd_blk_write(struct udevice *dev, lbaint_t start, lbaint_t blkcnt,
+ const void *src)
+{
+ struct blk_desc *block_dev = dev_get_uclass_plat(dev);
+ struct mtd_info *mtd = blk_desc_to_mtd(block_dev);
+ unsigned int sect_size = block_dev->blksz;
+ lbaint_t cur = start, blocks_todo = blkcnt;
+ ulong write_cnt = 0;
+ u8 *buf;
+ int ret = 0;
+
+ buf = malloc(mtd->erasesize);
+ if (!buf)
+ return -ENOMEM;
+
+ while (blocks_todo > 0) {
+ loff_t sect_start = cur * sect_size;
+ loff_t erase_start = ALIGN_DOWN(sect_start, mtd->erasesize);
+ u32 offset = sect_start - erase_start;
+ size_t cur_size = min_t(size_t, mtd->erasesize - offset,
+ blocks_todo * sect_size);
+ size_t retlen;
+ lbaint_t written;
+
+ ret = mtd_read(mtd, erase_start, mtd->erasesize, &retlen, buf);
+ if (ret)
+ goto out;
+
+ if (retlen != mtd->erasesize) {
+ pr_err("mtdblock: failed to read block 0x" LBAF "\n", cur);
+ ret = -EIO;
+ goto out;
+ }
+
+ memcpy(buf + offset, src, cur_size);
+
+ ret = mtd_erase_write(mtd, erase_start, buf);
+ if (ret)
+ goto out;
+
+ written = cur_size / sect_size;
+
+ blocks_todo -= written;
+ cur += written;
+ src += cur_size;
+ write_cnt += written;
+ }
+
+out:
+ free(buf);
+
+ if (ret)
+ return ret;
+
+ return write_cnt;
+}
+
+static int mtd_blk_probe(struct udevice *dev)
+{
+ struct blk_desc *bdesc;
+ struct mtd_info *mtd;
+ int ret;
+
+ ret = device_probe(dev);
+ if (ret) {
+ pr_err("Probing %s failed (err=%d)\n", dev->name, ret);
+ return ret;
+ }
+
+ bdesc = dev_get_uclass_plat(dev);
+ mtd = blk_desc_to_mtd(bdesc);
+
+ if (mtd_type_is_nand(mtd))
+ pr_warn("MTD device '%s' is NAND, please use UBI devices instead\n",
+ mtd->name);
+
+ return 0;
+}
+
+static const struct blk_ops mtd_blk_ops = {
+ .read = mtd_blk_read,
+ .write = mtd_blk_write,
+};
+
+U_BOOT_DRIVER(mtd_blk) = {
+ .name = "mtd_blk",
+ .id = UCLASS_BLK,
+ .ops = &mtd_blk_ops,
+ .probe = mtd_blk_probe,
+};
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index be1d19b..88094b8 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -20,6 +20,8 @@
#endif
#include <malloc.h>
+#include <memalign.h>
+#include <part.h>
#include <linux/bug.h>
#include <linux/errno.h>
#include <linux/compat.h>
@@ -1054,3 +1056,77 @@
return mtd->size;
}
EXPORT_SYMBOL_GPL(mtd_get_device_size);
+
+static struct mtd_info *mtd_get_partition_by_index(struct mtd_info *mtd, int index)
+{
+ struct mtd_info *part;
+ int i = 0;
+
+ list_for_each_entry(part, &mtd->partitions, node)
+ if (i++ == index)
+ return part;
+
+ debug("Partition with idx=%d not found on MTD device %s\n", index, mtd->name);
+ return NULL;
+}
+
+static int __maybe_unused part_get_info_mtd(struct blk_desc *dev_desc, int part_idx,
+ struct disk_partition *info)
+{
+ struct mtd_info *master = blk_desc_to_mtd(dev_desc);
+ struct mtd_info *part;
+
+ if (!master) {
+ debug("MTD device is NULL\n");
+ return -EINVAL;
+ }
+
+ part = mtd_get_partition_by_index(master, part_idx);
+ if (!part) {
+ debug("Failed to find partition with idx=%d\n", part_idx);
+ return -EINVAL;
+ }
+
+ snprintf(info->name, PART_NAME_LEN, part->name);
+ info->start = part->offset / dev_desc->blksz;
+ info->size = part->size / dev_desc->blksz;
+ info->blksz = dev_desc->blksz;
+
+ return 0;
+}
+
+static void __maybe_unused part_print_mtd(struct blk_desc *dev_desc)
+{
+ struct mtd_info *master = blk_desc_to_mtd(dev_desc);
+ struct mtd_info *part;
+
+ if (!master)
+ return;
+
+ list_for_each_entry(part, &master->partitions, node)
+ printf("- 0x%012llx-0x%012llx : \"%s\"\n",
+ part->offset, part->offset + part->size, part->name);
+}
+
+static int part_test_mtd(struct blk_desc *dev_desc)
+{
+ struct mtd_info *master = blk_desc_to_mtd(dev_desc);
+ ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, dev_desc->blksz);
+
+ if (!master)
+ return -1;
+
+ if (blk_dread(dev_desc, 0, 1, (ulong *)buffer) != 1)
+ return -1;
+
+ return 0;
+}
+
+U_BOOT_PART_TYPE(mtd) = {
+ .name = "MTD",
+ .part_type = PART_TYPE_MTD,
+ .max_entries = MTD_ENTRY_NUMBERS,
+ .get_info = part_get_info_ptr(part_get_info_mtd),
+ .print = part_print_ptr(part_print_mtd),
+ .test = part_test_mtd,
+};
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index ef50237..f5ddfbf 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -25,6 +25,7 @@
#include <watchdog.h>
#include <spi.h>
#include <spi-mem.h>
+#include <ubi_uboot.h>
#include <dm/device_compat.h>
#include <dm/devres.h>
#include <linux/bitops.h>
@@ -33,6 +34,10 @@
#include <linux/printk.h>
#endif
+struct spinand_plat {
+ struct mtd_info *mtd;
+};
+
/* SPI NAND index visible in MTD names */
static int spi_nand_idx;
@@ -1172,12 +1177,32 @@
kfree(spinand->scratchbuf);
}
+static int spinand_bind(struct udevice *dev)
+{
+ if (blk_enabled()) {
+ struct spinand_plat *plat = dev_get_plat(dev);
+ int ret;
+
+ if (CONFIG_IS_ENABLED(MTD_BLOCK)) {
+ ret = mtd_bind(dev, &plat->mtd);
+ if (ret)
+ return ret;
+ }
+
+ if (CONFIG_IS_ENABLED(UBI_BLOCK))
+ return ubi_bind(dev);
+ }
+
+ return 0;
+}
+
static int spinand_probe(struct udevice *dev)
{
struct spinand_device *spinand = dev_get_priv(dev);
struct spi_slave *slave = dev_get_parent_priv(dev);
struct mtd_info *mtd = dev_get_uclass_priv(dev);
struct nand_device *nand = spinand_to_nand(spinand);
+ struct spinand_plat *plat = dev_get_plat(dev);
int ret;
#ifndef __UBOOT__
@@ -1217,6 +1242,8 @@
if (ret)
goto err_spinand_cleanup;
+ plat->mtd = mtd;
+
return 0;
err_spinand_cleanup:
@@ -1286,4 +1313,6 @@
.of_match = spinand_ids,
.priv_auto = sizeof(struct spinand_device),
.probe = spinand_probe,
+ .bind = spinand_bind,
+ .plat_auto = sizeof(struct spinand_plat),
};
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index 2206d73..88709a5 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -241,6 +241,8 @@
SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) },
{ INFO("is25lx512", 0x9d5a1a, 0, 64 * 1024, 1024,
SECT_4K | USE_FSR | SPI_NOR_4B_OPCODES | SPI_NOR_HAS_TB) },
+ { INFO("is25lp01gg", 0x9d6021, 0, 64 * 1024, 2048,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_TB) },
#endif
#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */
/* Macronix */
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index fd446d6..c027d89 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -114,5 +114,11 @@
help
Enable UBI fastmap debug
+config UBI_BLOCK
+ bool "Enable UBI block device support"
+ depends on BLK
+ help
+ Enable UBI block device support using blk_ops abstraction.
+
endif # MTD_UBI
endmenu # "Enable UBI - Unsorted block images"
diff --git a/drivers/mtd/ubi/Makefile b/drivers/mtd/ubi/Makefile
index 30d00fb..690ef9e 100644
--- a/drivers/mtd/ubi/Makefile
+++ b/drivers/mtd/ubi/Makefile
@@ -7,3 +7,4 @@
obj-$(CONFIG_MTD_UBI_FASTMAP) += fastmap.o
obj-y += misc.o
obj-y += debug.o
+obj-$(CONFIG_UBI_BLOCK) += block.o part.o
diff --git a/drivers/mtd/ubi/block.c b/drivers/mtd/ubi/block.c
new file mode 100644
index 0000000..99d5528
--- /dev/null
+++ b/drivers/mtd/ubi/block.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2024 SaluteDevices, Inc.
+ *
+ * Author: Alexey Romanov <avromanov@salutedevices.com>
+ */
+
+#include <blk.h>
+#include <part.h>
+#include <ubi_uboot.h>
+#include <dm/device.h>
+#include <dm/device-internal.h>
+
+int ubi_bind(struct udevice *dev)
+{
+ struct blk_desc *bdesc;
+ struct udevice *bdev;
+ int ret;
+
+ ret = blk_create_devicef(dev, "ubi_blk", "blk", UCLASS_MTD,
+ -1, 512, 0, &bdev);
+ if (ret) {
+ pr_err("Cannot create block device");
+ return ret;
+ }
+
+ bdesc = dev_get_uclass_plat(bdev);
+
+ bdesc->bdev = bdev;
+ bdesc->part_type = PART_TYPE_UBI;
+
+ return 0;
+}
+
+static struct ubi_device *get_ubi_device(void)
+{
+ return ubi_devices[0];
+}
+
+static char *get_volume_name(int vol_id)
+{
+ struct ubi_device *ubi = get_ubi_device();
+ int i;
+
+ for (i = 0; i < (ubi->vtbl_slots + 1); i++) {
+ struct ubi_volume *volume = ubi->volumes[i];
+
+ if (!volume)
+ continue;
+
+ if (volume->vol_id >= UBI_INTERNAL_VOL_START)
+ continue;
+
+ if (volume->vol_id == vol_id)
+ return volume->name;
+ }
+
+ return NULL;
+}
+
+static ulong ubi_bread(struct udevice *dev, lbaint_t start, lbaint_t blkcnt,
+ void *dst)
+{
+ struct blk_desc *block_dev = dev_get_uclass_plat(dev);
+ char *volume_name = get_volume_name(block_dev->hwpart);
+ unsigned int size = blkcnt * block_dev->blksz;
+ loff_t offset = start * block_dev->blksz;
+ int ret;
+
+ if (!volume_name) {
+ pr_err("%s: failed to find volume name for blk=" LBAF "\n", __func__, start);
+ return -EINVAL;
+ }
+
+ ret = ubi_volume_read(volume_name, dst, offset, size);
+ if (ret) {
+ pr_err("%s: failed to read from %s UBI volume\n", __func__, volume_name);
+ return ret;
+ }
+
+ return blkcnt;
+}
+
+static ulong ubi_bwrite(struct udevice *dev, lbaint_t start, lbaint_t blkcnt,
+ const void *src)
+{
+ struct blk_desc *block_dev = dev_get_uclass_plat(dev);
+ char *volume_name = get_volume_name(block_dev->hwpart);
+ unsigned int size = blkcnt * block_dev->blksz;
+ loff_t offset = start * block_dev->blksz;
+ int ret;
+
+ if (!volume_name) {
+ pr_err("%s: failed to find volume for blk=" LBAF "\n", __func__, start);
+ return -EINVAL;
+ }
+
+ ret = ubi_volume_write(volume_name, (void *)src, offset, size);
+ if (ret) {
+ pr_err("%s: failed to write from %s UBI volume\n", __func__, volume_name);
+ return ret;
+ }
+
+ return blkcnt;
+}
+
+static int ubi_blk_probe(struct udevice *dev)
+{
+ int ret;
+
+ ret = device_probe(dev);
+ if (ret) {
+ pr_err("Probing %s failed (err=%d)\n", dev->name, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct blk_ops ubi_blk_ops = {
+ .read = ubi_bread,
+ .write = ubi_bwrite,
+};
+
+U_BOOT_DRIVER(ubi_blk) = {
+ .name = "ubi_blk",
+ .id = UCLASS_BLK,
+ .ops = &ubi_blk_ops,
+ .probe = ubi_blk_probe,
+};
diff --git a/drivers/mtd/ubi/part.c b/drivers/mtd/ubi/part.c
new file mode 100644
index 0000000..13d1f16
--- /dev/null
+++ b/drivers/mtd/ubi/part.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2024 SaluteDevices, Inc.
+ *
+ * Author: Alexey Romanov <avromanov@salutedevices.com>
+ */
+
+#include <memalign.h>
+#include <part.h>
+#include <ubi_uboot.h>
+
+static inline struct ubi_device *get_ubi_device(void)
+{
+ return ubi_devices[0];
+}
+
+static struct ubi_volume *ubi_get_volume_by_index(int vol_id)
+{
+ struct ubi_device *ubi = get_ubi_device();
+ int i;
+
+ for (i = 0; i < (ubi->vtbl_slots + 1); i++) {
+ struct ubi_volume *volume = ubi->volumes[i];
+
+ if (!volume)
+ continue;
+
+ if (volume->vol_id >= UBI_INTERNAL_VOL_START)
+ continue;
+
+ if (volume->vol_id == vol_id)
+ return volume;
+ }
+
+ return NULL;
+}
+
+static int __maybe_unused part_get_info_ubi(struct blk_desc *dev_desc, int part_idx,
+ struct disk_partition *info)
+{
+ struct ubi_volume *vol;
+
+ /*
+ * We must use part_idx - 1 instead of part_idx, because
+ * part_get_info_by_name() start indexing at 1, not 0.
+ * ubi volumes idexed starting at 0
+ */
+ vol = ubi_get_volume_by_index(part_idx - 1);
+ if (!vol)
+ return 0;
+
+ snprintf(info->name, PART_NAME_LEN, vol->name);
+
+ info->start = 0;
+ info->size = (unsigned long)vol->used_bytes / dev_desc->blksz;
+ info->blksz = dev_desc->blksz;
+
+ /* Save UBI volume ID in blk device descriptor */
+ dev_desc->hwpart = vol->vol_id;
+
+ return 0;
+}
+
+static void __maybe_unused part_print_ubi(struct blk_desc *dev_desc)
+{
+ struct ubi_device *ubi = get_ubi_device();
+ int i;
+
+ for (i = 0; i < (ubi->vtbl_slots + 1); i++) {
+ struct ubi_volume *volume = ubi->volumes[i];
+
+ if (!volume)
+ continue;
+
+ if (volume->vol_id >= UBI_INTERNAL_VOL_START)
+ continue;
+
+ printf("%d: %s\n", volume->vol_id, volume->name);
+ }
+}
+
+static int part_test_ubi(struct blk_desc *dev_desc)
+{
+ ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, dev_desc->blksz);
+
+ if (blk_dread(dev_desc, 0, 1, (ulong *)buffer) != 1)
+ return -1;
+
+ return 0;
+}
+
+U_BOOT_PART_TYPE(ubi) = {
+ .name = "ubi",
+ .part_type = PART_TYPE_UBI,
+ .max_entries = UBI_ENTRY_NUMBERS,
+ .get_info = part_get_info_ptr(part_get_info_ubi),
+ .print = part_print_ptr(part_print_ubi),
+ .test = part_test_ubi,
+};
diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index 1b85cbc..5145b51 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -67,12 +67,15 @@
};
struct rockchip_combphy_cfg {
+ unsigned int num_phys;
+ unsigned int phy_ids[3];
const struct rockchip_combphy_grfcfg *grfcfg;
int (*combphy_cfg)(struct rockchip_combphy_priv *priv);
};
struct rockchip_combphy_priv {
u32 mode;
+ int id;
void __iomem *mmio;
struct udevice *dev;
struct regmap *pipe_grf;
@@ -270,8 +273,13 @@
{
struct rockchip_combphy_priv *priv = dev_get_priv(udev);
const struct rockchip_combphy_cfg *phy_cfg;
+ fdt_addr_t addr = dev_read_addr(udev);
+ if (addr == FDT_ADDR_T_NONE) {
+ dev_err(udev, "No valid device address found\n");
+ return -EINVAL;
+ }
- priv->mmio = (void __iomem *)dev_read_addr(udev);
+ priv->mmio = (void __iomem *)addr;
if (IS_ERR(priv->mmio))
return PTR_ERR(priv->mmio);
@@ -281,6 +289,20 @@
return -EINVAL;
}
+ /* Find the phy-id based on the device's I/O-address */
+ priv->id = -ENODEV;
+ for (int id = 0; id < phy_cfg->num_phys; id++) {
+ if (addr == phy_cfg->phy_ids[id]) {
+ priv->id = id;
+ break;
+ }
+ }
+
+ if (priv->id == -ENODEV) {
+ dev_err(udev, "Failed to find PHY ID\n");
+ return -ENODEV;
+ }
+
priv->dev = udev;
priv->mode = PHY_TYPE_SATA;
priv->cfg = phy_cfg;
@@ -421,6 +443,12 @@
};
static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = {
+ .num_phys = 3,
+ .phy_ids = {
+ 0xfe820000,
+ 0xfe830000,
+ 0xfe840000,
+ },
.grfcfg = &rk3568_combphy_grfcfgs,
.combphy_cfg = rk3568_combphy_cfg,
};
@@ -436,8 +464,14 @@
param_write(priv->phy_grf, &cfg->con1_for_pcie, true);
param_write(priv->phy_grf, &cfg->con2_for_pcie, true);
param_write(priv->phy_grf, &cfg->con3_for_pcie, true);
- param_write(priv->pipe_grf, &cfg->pipe_pcie1l0_sel, true);
- param_write(priv->pipe_grf, &cfg->pipe_pcie1l1_sel, true);
+ switch (priv->id) {
+ case 1:
+ param_write(priv->pipe_grf, &cfg->pipe_pcie1l0_sel, true);
+ break;
+ case 2:
+ param_write(priv->pipe_grf, &cfg->pipe_pcie1l1_sel, true);
+ break;
+ }
break;
case PHY_TYPE_USB3:
param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
@@ -515,6 +549,12 @@
};
static const struct rockchip_combphy_cfg rk3588_combphy_cfgs = {
+ .num_phys = 3,
+ .phy_ids = {
+ 0xfee00000,
+ 0xfee10000,
+ 0xfee20000,
+ },
.grfcfg = &rk3588_combphy_grfcfgs,
.combphy_cfg = rk3588_combphy_cfg,
};
diff --git a/drivers/pinctrl/pinctrl-generic.c b/drivers/pinctrl/pinctrl-generic.c
index 2464acf..81a9327 100644
--- a/drivers/pinctrl/pinctrl-generic.c
+++ b/drivers/pinctrl/pinctrl-generic.c
@@ -22,7 +22,7 @@
if (!ops->get_pins_count || !ops->get_pin_name) {
dev_dbg(dev, "get_pins_count or get_pin_name missing\n");
- return -ENOSYS;
+ return -ENOENT;
}
npins = ops->get_pins_count(dev);
@@ -35,7 +35,7 @@
return selector;
}
- return -ENOSYS;
+ return -ENOENT;
}
/**
@@ -53,7 +53,7 @@
if (!ops->get_groups_count || !ops->get_group_name) {
dev_dbg(dev, "get_groups_count or get_group_name missing\n");
- return -ENOSYS;
+ return -ENOENT;
}
ngroups = ops->get_groups_count(dev);
@@ -66,7 +66,7 @@
return selector;
}
- return -ENOSYS;
+ return -ENOENT;
}
#if CONFIG_IS_ENABLED(PINMUX)
@@ -86,7 +86,7 @@
if (!ops->get_functions_count || !ops->get_function_name) {
dev_dbg(dev,
"get_functions_count or get_function_name missing\n");
- return -ENOSYS;
+ return -ENOENT;
}
nfuncs = ops->get_functions_count(dev);
@@ -99,7 +99,7 @@
return selector;
}
- return -ENOSYS;
+ return -ENOENT;
}
/**
@@ -119,14 +119,14 @@
if (is_group) {
if (!ops->pinmux_group_set) {
dev_dbg(dev, "pinmux_group_set op missing\n");
- return -ENOSYS;
+ return -ENOENT;
}
return ops->pinmux_group_set(dev, selector, func_selector);
} else {
if (!ops->pinmux_set) {
dev_dbg(dev, "pinmux_set op missing\n");
- return -ENOSYS;
+ return -ENOENT;
}
return ops->pinmux_set(dev, selector, func_selector);
}
@@ -162,7 +162,7 @@
if (!ops->pinconf_num_params || !ops->pinconf_params) {
dev_dbg(dev, "pinconf_num_params or pinconf_params missing\n");
- return -ENOSYS;
+ return -ENOENT;
}
p = ops->pinconf_params;
@@ -176,7 +176,7 @@
}
}
- return -ENOSYS;
+ return -ENOENT;
}
/**
@@ -198,7 +198,7 @@
if (is_group) {
if (!ops->pinconf_group_set) {
dev_dbg(dev, "pinconf_group_set op missing\n");
- return -ENOSYS;
+ return -ENOENT;
}
return ops->pinconf_group_set(dev, selector, param,
@@ -206,7 +206,7 @@
} else {
if (!ops->pinconf_set) {
dev_dbg(dev, "pinconf_set op missing\n");
- return -ENOSYS;
+ return -ENOENT;
}
return ops->pinconf_set(dev, selector, param, argument);
}
@@ -215,7 +215,7 @@
static int pinconf_prop_name_to_param(struct udevice *dev,
const char *property, u32 *default_value)
{
- return -ENOSYS;
+ return -ENOENT;
}
static int pinconf_enable_setting(struct udevice *dev, bool is_group,
diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
index a871fc4..c2fc1c6 100644
--- a/drivers/power/power_i2c.c
+++ b/drivers/power/power_i2c.c
@@ -33,8 +33,6 @@
p->bus);
return -ENXIO;
}
-#else /* Non DM I2C support - will be removed */
- I2C_SET_BUS(p->bus);
#endif
switch (pmic_i2c_tx_num) {
@@ -93,9 +91,6 @@
return -ENXIO;
}
ret = dm_i2c_read(dev, reg, buf, pmic_i2c_tx_num);
-#else /* Non DM I2C support - will be removed */
- I2C_SET_BUS(p->bus);
- ret = i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num);
#endif
if (ret)
return ret;
diff --git a/drivers/soc/soc_xilinx_zynqmp.c b/drivers/soc/soc_xilinx_zynqmp.c
index a2d5b82..0c45c78 100644
--- a/drivers/soc/soc_xilinx_zynqmp.c
+++ b/drivers/soc/soc_xilinx_zynqmp.c
@@ -44,6 +44,7 @@
ZYNQMP_VARIANT_DR_SE = BIT(4),
ZYNQMP_VARIANT_EG_SE = BIT(5),
ZYNQMP_VARIANT_TEG = BIT(6),
+ ZYNQMP_VARIANT_EG_LR = BIT(7),
};
struct zynqmp_device {
@@ -65,6 +66,11 @@
.variants = ZYNQMP_VARIANT_EG,
},
{
+ .id = 0x04689093,
+ .device = 1,
+ .variants = ZYNQMP_VARIANT_EG_LR,
+ },
+ {
.id = 0x04711093,
.device = 2,
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG,
@@ -300,6 +306,8 @@
strlcat(priv->machine, "eg", sizeof(priv->machine));
} else if (device->variants & ZYNQMP_VARIANT_EG_SE) {
strlcat(priv->machine, "eg_SE", sizeof(priv->machine));
+ } else if (device->variants & ZYNQMP_VARIANT_EG_LR) {
+ strlcat(priv->machine, "eg_LR", sizeof(priv->machine));
} else if (device->variants & ZYNQMP_VARIANT_DR) {
strlcat(priv->machine, "dr", sizeof(priv->machine));
} else if (device->variants & ZYNQMP_VARIANT_DR_SE) {
diff --git a/drivers/spi/soft_spi.c b/drivers/spi/soft_spi.c
index 9bdb4a5..a8ec2f4 100644
--- a/drivers/spi/soft_spi.c
+++ b/drivers/spi/soft_spi.c
@@ -237,6 +237,18 @@
return 0;
}
+static int retrieve_num_chipselects(struct udevice *dev)
+{
+ int chipselects;
+ int ret;
+
+ ret = ofnode_read_u32(dev_ofnode(dev), "num-chipselects", &chipselects);
+ if (ret)
+ return ret;
+
+ return chipselects;
+}
+
static int soft_spi_probe(struct udevice *dev)
{
struct spi_slave *slave = dev_get_parent_priv(dev);
@@ -249,7 +261,15 @@
ret = gpio_request_by_name(dev, "cs-gpios", 0, &plat->cs,
GPIOD_IS_OUT | cs_flags);
- if (ret)
+ /*
+ * If num-chipselects is zero we're ignoring absence of cs-gpios. This
+ * code relies on the fact that `gpio_request_by_name` call above
+ * initiailizes plat->cs to correct value with invalid GPIO even when
+ * there is no cs-gpios node in dts. All other functions which work
+ * with plat->cs verify it via `dm_gpio_is_valid` before using it, so
+ * such value doesn't cause any problems.
+ */
+ if (ret && retrieve_num_chipselects(dev) != 0)
return -EINVAL;
ret = gpio_request_by_name(dev, "gpio-sck", 0, &plat->sclk,
@@ -271,7 +291,7 @@
ret = gpio_request_by_name(dev, "gpio-miso", 0, &plat->miso,
GPIOD_IS_IN);
if (ret)
- ret = gpio_request_by_name(dev, "gpio-miso", 0, &plat->miso,
+ ret = gpio_request_by_name(dev, "miso-gpios", 0, &plat->miso,
GPIOD_IS_IN);
if (ret)
plat->flags |= SPI_MASTER_NO_RX;
diff --git a/drivers/spi/spi-sunxi.c b/drivers/spi/spi-sunxi.c
index a7333d8..88550b8 100644
--- a/drivers/spi/spi-sunxi.c
+++ b/drivers/spi/spi-sunxi.c
@@ -233,7 +233,7 @@
static void sun4i_spi_set_speed_mode(struct udevice *dev)
{
struct sun4i_spi_priv *priv = dev_get_priv(dev);
- unsigned int div;
+ unsigned int div, div_cdr2;
u32 reg;
/*
@@ -249,6 +249,8 @@
* We have two choices there. Either we can use the clock
* divide rate 1, which is calculated thanks to this formula:
* SPI_CLK = MOD_CLK / (2 ^ (cdr + 1))
+ * Or for sun6i/sun8i variants:
+ * SPI_CLK = MOD_CLK / (2 ^ cdr)
* Or we can use CDR2, which is calculated with the formula:
* SPI_CLK = MOD_CLK / (2 * (cdr + 1))
* Whether we use the former or the latter is set through the
@@ -256,18 +258,18 @@
*
* First try CDR2, and if we can't reach the expected
* frequency, fall back to CDR1.
+ * There is one exception if the requested clock is the input
+ * clock. In that case we always use CDR1 because we'll get a
+ * 1:1 ration for sun6i/sun8i variants.
*/
div = DIV_ROUND_UP(SUNXI_INPUT_CLOCK, priv->freq);
+ div_cdr2 = DIV_ROUND_UP(div, 2);
reg = readl(SPI_REG(priv, SPI_CCR));
- if ((div / 2) <= (SUN4I_CLK_CTL_CDR2_MASK + 1)) {
- div /= 2;
- if (div > 0)
- div--;
-
+ if (div != 1 && (div_cdr2 <= (SUN4I_CLK_CTL_CDR2_MASK + 1))) {
reg &= ~(SUN4I_CLK_CTL_CDR2_MASK | SUN4I_CLK_CTL_DRS);
- reg |= SUN4I_CLK_CTL_CDR2(div) | SUN4I_CLK_CTL_DRS;
+ reg |= SUN4I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN4I_CLK_CTL_DRS;
} else {
div = fls(div - 1);
/* The F1C100s encodes the divider as 2^(n+1) */
diff --git a/drivers/tpm/tpm2_tis_core.c b/drivers/tpm/tpm2_tis_core.c
index 680a640..1fdf8cf 100644
--- a/drivers/tpm/tpm2_tis_core.c
+++ b/drivers/tpm/tpm2_tis_core.c
@@ -419,6 +419,28 @@
return true;
}
+static int tpm_tis_wait_init(struct udevice *dev, int loc)
+{
+ struct tpm_chip *chip = dev_get_priv(dev);
+ unsigned long start, stop;
+ u8 status;
+ int ret;
+
+ start = get_timer(0);
+ stop = chip->timeout_b;
+ do {
+ mdelay(TPM_TIMEOUT_MS);
+ ret = chip->phy_ops->read_bytes(dev, TPM_ACCESS(loc), 1, &status);
+ if (ret)
+ break;
+
+ if (status & TPM_ACCESS_VALID)
+ return 0;
+ } while (get_timer(start) < stop);
+
+ return -EIO;
+}
+
int tpm_tis_init(struct udevice *dev)
{
struct tpm_chip *chip = dev_get_priv(dev);
@@ -436,6 +458,12 @@
chip->timeout_c = TIS_SHORT_TIMEOUT_MS;
chip->timeout_d = TIS_SHORT_TIMEOUT_MS;
+ ret = tpm_tis_wait_init(dev, chip->locality);
+ if (ret) {
+ log(LOGC_DM, LOGL_ERR, "%s: no device found\n", __func__);
+ return ret;
+ }
+
ret = tpm_tis_request_locality(dev, 0);
if (ret)
return ret;
diff --git a/drivers/tpm/tpm2_tis_spi.c b/drivers/tpm/tpm2_tis_spi.c
index d35a4dd..c433e80 100644
--- a/drivers/tpm/tpm2_tis_spi.c
+++ b/drivers/tpm/tpm2_tis_spi.c
@@ -187,29 +187,6 @@
return tpm_tis_spi_write(dev, addr, sizeof(value), (u8 *)&value_le);
}
-static int tpm_tis_wait_init(struct udevice *dev, int loc)
-{
- struct tpm_chip *chip = dev_get_priv(dev);
- unsigned long start, stop;
- u8 status;
- int ret;
-
- start = get_timer(0);
- stop = chip->timeout_b;
- do {
- mdelay(TPM_TIMEOUT_MS);
-
- ret = tpm_tis_spi_read(dev, TPM_ACCESS(loc), 1, &status);
- if (ret)
- break;
-
- if (status & TPM_ACCESS_VALID)
- return 0;
- } while (get_timer(start) < stop);
-
- return -EIO;
-}
-
static struct tpm_tis_phy_ops phy_ops = {
.read_bytes = tpm_tis_spi_read,
.write_bytes = tpm_tis_spi_write,
@@ -221,7 +198,6 @@
{
struct tpm_tis_chip_data *drv_data = (void *)dev_get_driver_data(dev);
struct tpm_chip_priv *priv = dev_get_uclass_priv(dev);
- struct tpm_chip *chip = dev_get_priv(dev);
int ret;
/* Use the TPM v2 stack */
@@ -255,12 +231,6 @@
/* Ensure a minimum amount of time elapsed since reset of the TPM */
mdelay(drv_data->time_before_first_cmd_ms);
- ret = tpm_tis_wait_init(dev, chip->locality);
- if (ret) {
- log(LOGC_DM, LOGL_ERR, "%s: no device found\n", __func__);
- return ret;
- }
-
tpm_tis_ops_register(dev, &phy_ops);
ret = tpm_tis_init(dev);
if (ret)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c443d56..a35b8c2 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -594,7 +594,8 @@
reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
/* This should read as U3 followed by revision number */
- if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
+ if ((reg & DWC3_GSNPSID_MASK) != 0x55330000 &&
+ (reg & DWC3_GSNPSID_MASK) != 0x33310000) {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
ret = -ENODEV;
goto err0;
diff --git a/drivers/usb/emul/sandbox_flash.c b/drivers/usb/emul/sandbox_flash.c
index 24420e3..b5176bb 100644
--- a/drivers/usb/emul/sandbox_flash.c
+++ b/drivers/usb/emul/sandbox_flash.c
@@ -196,7 +196,7 @@
priv->fd != -1) {
offset = os_lseek(priv->fd, info->seek_block * info->block_size,
OS_SEEK_SET);
- if (offset == (off_t)-1)
+ if (offset < 0)
setup_fail_response(priv);
else
setup_response(priv);
diff --git a/drivers/usb/host/ohci-lpc32xx.c b/drivers/usb/host/ohci-lpc32xx.c
index ed04cae..bf89bf8 100644
--- a/drivers/usb/host/ohci-lpc32xx.c
+++ b/drivers/usb/host/ohci-lpc32xx.c
@@ -94,10 +94,6 @@
static void isp1301_configure(struct udevice *dev)
{
-#if !CONFIG_IS_ENABLED(DM_I2C)
- i2c_set_bus_num(I2C_2);
-#endif
-
/*
* LPC32XX only supports DAT_SE0 USB mode
* This sequence is important
diff --git a/dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts b/dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts
index 079101c..62d18ca 100644
--- a/dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3308-rock-pi-s.dts
@@ -17,6 +17,7 @@
ethernet0 = &gmac;
mmc0 = &emmc;
mmc1 = &sdmmc;
+ mmc2 = &sdio;
};
chosen {
@@ -144,11 +145,25 @@
&gmac {
clock_in_out = "output";
+ phy-handle = <&rtl8201f>;
phy-supply = <&vcc_io>;
- snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 50000 50000>;
status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8201f: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&gpio0 {
@@ -217,10 +232,40 @@
status = "okay";
};
+&io_domains {
+ vccio0-supply = <&vcc_io>;
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc_io>;
+ vccio3-supply = <&vcc_io>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio5-supply = <&vcc_io>;
+ status = "okay";
+};
+
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&rtc_32k>;
+ bluetooth {
+ bt_reg_on: bt-reg-on {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ host_wake_bt: host-wake-bt {
+ rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ gmac {
+ mac_rst: mac-rst {
+ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
leds {
green_led: green-led {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -264,15 +309,31 @@
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
- max-frequency = <1000000>;
+ max-frequency = <100000000>;
mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
non-removable;
- sd-uhs-sdr104;
+ sd-uhs-sdr50;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc_1v8>;
status = "okay";
+
+ rtl8723ds: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake>;
+ };
};
&sdmmc {
+ cap-mmc-highspeed;
cap-sd-highspeed;
+ disable-wp;
+ vmmc-supply = <&vcc_io>;
status = "okay";
};
@@ -291,16 +352,22 @@
};
&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>;
status = "okay";
};
&uart4 {
+ uart-has-rtscts;
status = "okay";
bluetooth {
- compatible = "realtek,rtl8723bs-bt";
- device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+ compatible = "realtek,rtl8723ds-bt";
+ device-wake-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
};
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3308-rock-s0.dts b/dts/upstream/src/arm64/rockchip/rk3308-rock-s0.dts
new file mode 100644
index 0000000..bd6419a
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3308-rock-s0.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "rk3308.dtsi"
+
+/ {
+ model = "Radxa ROCK S0";
+ compatible = "radxa,rock-s0", "rockchip,rk3308";
+
+ aliases {
+ ethernet0 = &gmac;
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ };
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_led>;
+
+ led-green {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vdd_log: regulator-1v04-vdd-log {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1040000>;
+ regulator-max-microvolt = <1040000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_ddr: regulator-1v5-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_1v8: regulator-1v8-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_io: regulator-3v3-vcc-io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_io";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vdd_core: regulator-vdd-core {
+ compatible = "pwm-regulator";
+ pwms = <&pwm0 0 5000 1>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_core";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <827000>;
+ regulator-max-microvolt = <1340000>;
+ regulator-settling-time-up-us = <250>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on>;
+ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+ cap-mmc-highspeed;
+ no-sd;
+ no-sdio;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_pwren>;
+ vmmc-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&gmac {
+ clock_in_out = "output";
+ phy-handle = <&rtl8201f>;
+ phy-supply = <&vcc_io>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8201f: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&io_domains {
+ vccio0-supply = <&vcc_io>;
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc_io>;
+ vccio3-supply = <&vcc_io>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio5-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_32k>;
+
+ bluetooth {
+ bt_reg_on: bt-reg-on {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ host_wake_bt: host-wake-bt {
+ rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ gmac {
+ mac_rst: mac-rst {
+ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ pwr_led: pwr-led {
+ rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_reg_on: wifi-reg-on {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_wake_host: wifi-wake-host {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin_pull_down>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <50000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
+ non-removable;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_wake_host>;
+ };
+};
+
+&sdmmc {
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ vmmc-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_host {
+ status = "okay";
+};
+
+&u2phy_otg {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>;
+ status = "okay";
+};
+
+&uart4 {
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43430a1-bt";
+ clocks = <&cru SCLK_RTC32K>;
+ clock-names = "lpo";
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PB4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
+ device-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
+ vbat-supply = <&vcc_io>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&usb_host_ehci {
+ status = "okay";
+};
+
+&usb_host_ohci {
+ status = "okay";
+};
+
+&usb20_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3308.dtsi b/dts/upstream/src/arm64/rockchip/rk3308.dtsi
index c00da15..31c25de 100644
--- a/dts/upstream/src/arm64/rockchip/rk3308.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3308.dtsi
@@ -173,6 +173,11 @@
compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd";
reg = <0x0 0xff000000 0x0 0x08000>;
+ io_domains: io-domains {
+ compatible = "rockchip,rk3308-io-voltage-domain";
+ status = "disabled";
+ };
+
reboot-mode {
compatible = "syscon-reboot-mode";
offset = <0x500>;
@@ -556,6 +561,30 @@
status = "disabled";
};
+ otp: efuse@ff210000 {
+ compatible = "rockchip,rk3308-otp";
+ reg = <0x0 0xff210000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>,
+ <&cru PCLK_OTP_PHY>;
+ clock-names = "otp", "apb_pclk", "phy";
+ resets = <&cru SRST_OTP_PHY>;
+ reset-names = "phy";
+
+ cpu_id: id@7 {
+ reg = <0x07 0x10>;
+ };
+
+ cpu_leakage: cpu-leakage@17 {
+ reg = <0x17 0x1>;
+ };
+
+ logic_leakage: logic-leakage@18 {
+ reg = <0x18 0x1>;
+ };
+ };
+
dmac0: dma-controller@ff2c0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xff2c0000 0x0 0x4000>;
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v1.1.dts b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v1.1.dts
new file mode 100644
index 0000000..074e93b
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v1.1.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-orangepi-3b.dtsi"
+
+/ {
+ model = "Xunlong Orange Pi 3B v1.1";
+ compatible = "xunlong,orangepi-3b-v1.1", "xunlong,orangepi-3b", "rockchip,rk3566";
+};
+
+&pmu_io_domains {
+ vccio5-supply = <&vcc_3v3>;
+};
+
+&gmac1 {
+ phy-handle = <&rgmii_phy1>;
+ status = "okay";
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v2.1.dts b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v2.1.dts
new file mode 100644
index 0000000..d894bff
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b-v2.1.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-orangepi-3b.dtsi"
+
+/ {
+ model = "Xunlong Orange Pi 3B v2.1";
+ compatible = "xunlong,orangepi-3b-v2.1", "xunlong,orangepi-3b", "rockchip,rk3566";
+
+ vccio_phy1: regulator-1v8-vccio-phy {
+ compatible = "regulator-fixed";
+ regulator-name = "vccio_phy1";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ };
+};
+
+&pmu_io_domains {
+ vccio5-supply = <&vccio_phy1>;
+};
+
+&gmac1 {
+ phy-handle = <&rgmii_phy1>;
+ status = "okay";
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&sdmmc1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_wake_host_h>;
+ };
+};
+
+&uart1 {
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rk809 1>;
+ clock-names = "lpo";
+ interrupt-parent = <&gpio2>;
+ interrupts = <RK_PC0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
+ device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_reg_on_h &bt_wake_host_h &host_wake_bt_h>;
+ vbat-supply = <&vcc_3v3>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b.dtsi b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b.dtsi
new file mode 100644
index 0000000..d539570
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3566-orangepi-3b.dtsi
@@ -0,0 +1,678 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+ model = "Xunlong Orange Pi 3B";
+ compatible = "xunlong,orangepi-3b", "rockchip,rk3566";
+
+ aliases {
+ ethernet0 = &gmac1;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc0;
+ mmc2 = &sdmmc1;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led>;
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc3v3_pcie30: regulator-3v3-vcc-pcie30 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie20_pwren>;
+ regulator-name = "vcc3v3_pcie30";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_sys: regulator-3v3-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc5v0_usb_host: regulator-5v0-vcc-usb-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_pwren_h>;
+ regulator-name = "vcc5v0_usb_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg_pwren_h>;
+ regulator-name = "vcc5v0_usb_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ post-power-on-delay-ms = <200>;
+ power-off-delay-us = <5000000>;
+ reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "Analog RK809";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&rk809>;
+ };
+ };
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&combphy2 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+ clock_in_out = "input";
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1m0_miim
+ &gmac1m0_tx_bus2
+ &gmac1m0_rx_bus2
+ &gmac1m0_rgmii_clk
+ &gmac1m0_rgmii_bus
+ &gmac1m0_clkinout>;
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+ assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+ #clock-cells = <1>;
+ clocks = <&cru I2S1_MCLKOUT_TX>;
+ clock-names = "mclk";
+ clock-output-names = "rk809-clkout1", "rk809-clkout2";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+ #sound-dai-cells = <0>;
+ system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_npu: DCDC_REG4 {
+ regulator-name = "vdd_npu";
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG5 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_image: LDO_REG1 {
+ regulator-name = "vdda0v9_image";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-name = "vdda_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-name = "vdda0v9_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG7 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG8 {
+ regulator-name = "vcca1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_image: LDO_REG9 {
+ regulator-name = "vcca1v8_image";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3: SWITCH_REG1 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: SWITCH_REG2 {
+ regulator-name = "vcc3v3_sd";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <830000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2s0_8ch {
+ status = "okay";
+};
+
+&i2s1_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_sclktx
+ &i2s1m0_lrcktx
+ &i2s1m0_sdi0
+ &i2s1m0_sdo0>;
+ rockchip,trcm-sync-tx-only;
+ status = "okay";
+};
+
+&pcie2x1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie20_pins>;
+ reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie30>;
+ status = "okay";
+};
+
+&pinctrl {
+ bluetooth {
+ bt_reg_on_h: bt-reg-on-h {
+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host_h: bt-wake-host-h {
+ rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ host_wake_bt_h: host-wake-bt-h {
+ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ work_led: work-led {
+ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie20_pins: pcie20-pins {
+ rockchip,pins =
+ <1 RK_PB0 4 &pcfg_pull_none>,
+ <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PB1 4 &pcfg_pull_none>;
+ };
+
+ pcie20_pwren: pcie20-pwren {
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ usb_host_pwren_h: usb-host-pwren-h {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb_otg_pwren_h: usb-otg-pwren-h {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_reg_on_h: wifi-reg-on-h {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_wake_host_h: wifi-wake-host-h {
+ rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio2-supply = <&vcc_1v8>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio6-supply = <&vcc_3v3>;
+ vccio7-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sfc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_usb_otg>;
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb2phy1_host {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&usb2phy1_otg {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-radxa-zero-3.dtsi b/dts/upstream/src/arm64/rockchip/rk3566-radxa-zero-3.dtsi
new file mode 100644
index 0000000..9cc7aa3
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3566-radxa-zero-3.dtsi
@@ -0,0 +1,531 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "d";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_led2>;
+
+ led-green {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc_1v8: regulator-1v8-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8_p>;
+ };
+
+ vcca_1v8: regulator-1v8-vcca {
+ compatible = "regulator-fixed";
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8_p>;
+ };
+
+ vcca1v8_image: regulator-1v8-vcca-image {
+ compatible = "regulator-fixed";
+ regulator-name = "vcca1v8_image";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8_p>;
+ };
+
+ vcc_3v3: regulator-3v3-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gpio0 {
+ gpio-line-names =
+ /* GPIO0_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_B0 - B7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO0_D0 - D7 */
+ "pin-10 [GPIO0_D0]", "pin-08 [GPIO0_D1]", "",
+ "", "", "", "", "";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /* GPIO1_A0 - A7 */
+ "pin-03 [GPIO1_A0]", "pin-05 [GPIO1_A1]", "",
+ "", "pin-37 [GPIO1_A4]", "",
+ "", "",
+ /* GPIO1_B0 - B7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO1_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ /* GPIO2_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO2_B0 - B7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO2_C0 - C7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO2_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ /* GPIO3_A0 - A7 */
+ "", "pin-11 [GPIO3_A1]", "pin-13 [GPIO3_A2]",
+ "pin-12 [GPIO3_A3]", "pin-35 [GPIO3_A4]", "pin-40 [GPIO3_A5]",
+ "pin-38 [GPIO3_A6]", "pin-36 [GPIO3_A7]",
+ /* GPIO3_B0 - B7 */
+ "pin-15 [GPIO3_B0]", "pin-16 [GPIO3_B1]", "pin-18 [GPIO3_B2]",
+ "pin-29 [GPIO3_B3]", "pin-31 [GPIO3_B4]", "",
+ "", "",
+ /* GPIO3_C0 - C7 */
+ "", "pin-22 [GPIO3_C1]", "pin-32 [GPIO3_C2]",
+ "pin-33 [GPIO3_C3]", "pin-07 [GPIO3_C4]", "",
+ "", "",
+ /* GPIO3_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ /* GPIO4_A0 - A7 */
+ "", "", "", "", "", "", "", "",
+ /* GPIO4_B0 - B7 */
+ "", "", "pin-27 [GPIO4_B2]",
+ "pin-28 [GPIO4_B3]", "", "", "", "",
+ /* GPIO4_C0 - C7 */
+ "", "", "pin-23 [GPIO4_C2]",
+ "pin-19 [GPIO4_C3]", "", "pin-21 [GPIO4_C5]",
+ "pin-24 [GPIO4_C6]", "",
+ /* GPIO4_D0 - D7 */
+ "", "", "", "", "", "", "", "";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_npu>;
+ status = "okay";
+};
+
+&hdmi {
+ avdd-0v9-supply = <&vdda_0v9>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk817: pmic@20 {
+ compatible = "rockchip,rk817";
+ reg = <0x20>;
+ #clock-cells = <1>;
+ clock-output-names = "rk817-clkout1", "rk817-clkout2";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_sys>;
+ vcc9-supply = <&vcc5v_midu>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_gpu_npu: DCDC_REG2 {
+ regulator-name = "vdd_gpu_npu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG4 {
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG1 {
+ regulator-name = "vcca1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-name = "vdda_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-name = "vdda0v9_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_1v8_p: LDO_REG7 {
+ regulator-name = "vcc_1v8_p";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG8 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG9 {
+ regulator-name = "vcc2v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc5v_midu: BOOST {
+ regulator-name = "vcc5v_midu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vbus: OTG_SWITCH {
+ regulator-name = "vbus";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu: regulator@40 {
+ compatible = "rockchip,rk8600";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1390000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2s0_8ch {
+ status = "okay";
+};
+
+&pinctrl {
+ leds {
+ user_led2: user-led2 {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcca1v8_pmu>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio2-supply = <&vcc_1v8>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_3v3>;
+ vccio7-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ vmmc-supply = <&vcc3v3_sys>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-radxa-zero-3e.dts b/dts/upstream/src/arm64/rockchip/rk3566-radxa-zero-3e.dts
new file mode 100644
index 0000000..4a830eb
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3566-radxa-zero-3e.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-radxa-zero-3.dtsi"
+
+/ {
+ model = "Radxa ZERO 3E";
+ compatible = "radxa,zero-3e", "rockchip,rk3566";
+
+ aliases {
+ ethernet0 = &gmac1;
+ mmc0 = &sdmmc0;
+ };
+};
+
+&gmac1 {
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+ clock_in_out = "input";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1m1_miim
+ &gmac1m1_tx_bus2
+ &gmac1m1_rx_bus2
+ &gmac1m1_rgmii_clk
+ &gmac1m1_rgmii_bus
+ &gmac1m1_clkinout>;
+ status = "okay";
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_rstn>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ gmac1 {
+ gmac1_rstn: gmac1-rstn {
+ rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-radxa-zero-3w.dts b/dts/upstream/src/arm64/rockchip/rk3566-radxa-zero-3w.dts
new file mode 100644
index 0000000..f92475c
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3566-radxa-zero-3w.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-radxa-zero-3.dtsi"
+
+/ {
+ model = "Radxa ZERO 3W";
+ compatible = "radxa,zero-3w", "rockchip,rk3566";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc0;
+ mmc2 = &sdmmc1;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk817 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <5000000>;
+ reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ bluetooth {
+ bt_reg_on_h: bt-reg-on-h {
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host_h: bt-wake-host-h {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ host_wake_bt_h: host-wake-bt-h {
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_reg_on_h: wifi-reg-on-h {
+ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_wake_host_h: wifi-wake-host-h {
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdhci {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3566-rock-3c.dts b/dts/upstream/src/arm64/rockchip/rk3566-rock-3c.dts
index b242409..f2cc086 100644
--- a/dts/upstream/src/arm64/rockchip/rk3566-rock-3c.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3566-rock-3c.dts
@@ -633,7 +633,7 @@
flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
- spi-max-frequency = <120000000>;
+ spi-max-frequency = <104000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-rock-3b.dts b/dts/upstream/src/arm64/rockchip/rk3568-rock-3b.dts
new file mode 100644
index 0000000..3d0c1cc
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3568-rock-3b.dts
@@ -0,0 +1,781 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+ model = "Radxa ROCK 3B";
+ compatible = "radxa,rock-3b", "rockchip,rk3568";
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc0;
+ mmc2 = &sdmmc2;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_ir>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led>;
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ /* pi6c pcie clock generator */
+ vcc3v3_pi6c_03: regulator-3v3-vcc-pi6c-03 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwren_h>;
+ regulator-name = "vcc3v3_pi6c_03";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <10000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_sys: regulator-3v3-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_sys2: regulator-3v3-vcc-sys2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys2";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc5v0_usb_host: regulator-5v0-vcc-usb-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_pwren_h>;
+ regulator-name = "vcc5v0_usb_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_otg_pwren_h>;
+ regulator-name = "vcc5v0_usb_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <5000000>;
+ reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "Analog RK809";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&rk809>;
+ };
+ };
+};
+
+&combphy0 {
+ status = "okay";
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&combphy2 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gmac0 {
+ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+ clock_in_out = "input";
+ phy-handle = <&rgmii_phy0>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac0_miim
+ &gmac0_tx_bus2
+ &gmac0_rx_bus2
+ &gmac0_rgmii_clk
+ &gmac0_rgmii_bus
+ &gmac0_clkinout>;
+ status = "okay";
+};
+
+&gmac1 {
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+ clock_in_out = "input";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1m1_miim
+ &gmac1m1_tx_bus2
+ &gmac1m1_rx_bus2
+ &gmac1m1_rgmii_clk
+ &gmac1m1_rgmii_bus
+ &gmac1m1_clkinout>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint {
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+ assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+ #clock-cells = <1>;
+ clocks = <&cru I2S1_MCLKOUT_TX>;
+ clock-names = "mclk";
+ clock-output-names = "rk809-clkout1", "rk809-clkout2";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+ #sound-dai-cells = <0>;
+ system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_npu: DCDC_REG4 {
+ regulator-name = "vdd_npu";
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG5 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_image: LDO_REG1 {
+ regulator-name = "vdda0v9_image";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-name = "vdda_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-name = "vdda0v9_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG7 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG8 {
+ regulator-name = "vcca1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_image: LDO_REG9 {
+ regulator-name = "vcca1v8_image";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3: SWITCH_REG1 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: SWITCH_REG2 {
+ regulator-name = "vcc3v3_sd";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <0>;
+ clock-output-names = "rtcic_32kout";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtcic_int_l>;
+ wakeup-source;
+ };
+};
+
+&i2s0_8ch {
+ status = "okay";
+};
+
+&i2s1_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_sclktx
+ &i2s1m0_lrcktx
+ &i2s1m0_sdi0
+ &i2s1m0_sdo0>;
+ rockchip,trcm-sync-tx-only;
+ status = "okay";
+};
+
+&mdio0 {
+ rgmii_phy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie2x1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie20m1_pins>;
+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_sys2>;
+ status = "okay";
+};
+
+&pcie30phy {
+ status = "okay";
+};
+
+&pcie3x2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie30x2m1_pins>;
+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pinctrl {
+ bluetooth {
+ bt_reg_on_h: bt-reg-on-h {
+ rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host_h: bt-wake-host-h {
+ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ host_wake_bt_h: host-wake-bt-h {
+ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ir-receiver {
+ pwm3_ir: pwm3-ir {
+ rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ led: led {
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie_pwren_h: pcie-pwren-h {
+ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie20 {
+ pcie20m1_pins: pcie20m1-pins {
+ rockchip,pins =
+ <2 RK_PD0 4 &pcfg_pull_none>,
+ <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>,
+ <2 RK_PD1 4 &pcfg_pull_none>;
+ };
+ };
+
+ pcie30x2 {
+ pcie30x2m1_pins: pcie30x2m1-pins {
+ rockchip,pins =
+ <2 RK_PD4 4 &pcfg_pull_none>,
+ <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,
+ <2 RK_PD5 4 &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ rtc {
+ rtcic_int_l: rtcic-int-l {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ usb_host_pwren_h: usb-host-pwren-h {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb_otg_pwren_h: usb-otg-pwren-h {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_reg_on_h: wifi-reg-on-h {
+ rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_wake_host_h: wifi-wake-host-h {
+ rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio2-supply = <&vcc_1v8>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_1v8>;
+ vccio7-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ mmc-hs200-1_8v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdmmc2 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_clk &sdmmc2m0_cmd>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sys2>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "disabled";
+};
+
+&sfc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn &uart8m0_rtsn>;
+ uart-has-rtscts;
+ status = "disabled";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ extcon = <&usb2phy0>;
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_usb_otg>;
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb2phy1_otg {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588s-pinctrl.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-base-pinctrl.dtsi
similarity index 100%
rename from dts/upstream/src/arm64/rockchip/rk3588s-pinctrl.dtsi
rename to dts/upstream/src/arm64/rockchip/rk3588-base-pinctrl.dtsi
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-base.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-base.dtsi
new file mode 100644
index 0000000..78bc9dc
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3588-base.dtsi
@@ -0,0 +1,2823 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rockchip,rk3588-cru.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/rk3588-power.h>
+#include <dt-bindings/reset/rockchip,rk3588-cru.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/ata/ahci.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ compatible = "rockchip,rk3588";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &uart6;
+ serial7 = &uart7;
+ serial8 = &uart8;
+ serial9 = &uart9;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ spi4 = &spi4;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu_l0>;
+ };
+ core1 {
+ cpu = <&cpu_l1>;
+ };
+ core2 {
+ cpu = <&cpu_l2>;
+ };
+ core3 {
+ cpu = <&cpu_l3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu_b0>;
+ };
+ core1 {
+ cpu = <&cpu_b1>;
+ };
+ };
+ cluster2 {
+ core0 {
+ cpu = <&cpu_b2>;
+ };
+ core1 {
+ cpu = <&cpu_b3>;
+ };
+ };
+ };
+
+ cpu_l0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <530>;
+ clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ assigned-clock-rates = <816000000>;
+ cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache_l0>;
+ dynamic-power-coefficient = <228>;
+ #cooling-cells = <2>;
+ };
+
+ cpu_l1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <530>;
+ clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache_l1>;
+ dynamic-power-coefficient = <228>;
+ #cooling-cells = <2>;
+ };
+
+ cpu_l2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x200>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <530>;
+ clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache_l2>;
+ dynamic-power-coefficient = <228>;
+ #cooling-cells = <2>;
+ };
+
+ cpu_l3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x300>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <530>;
+ clocks = <&scmi_clk SCMI_CLK_CPUL>;
+ cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <32768>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <128>;
+ d-cache-size = <32768>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache_l3>;
+ dynamic-power-coefficient = <228>;
+ #cooling-cells = <2>;
+ };
+
+ cpu_b0: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x400>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+ assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+ assigned-clock-rates = <816000000>;
+ cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <65536>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <65536>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_cache_b0>;
+ dynamic-power-coefficient = <416>;
+ #cooling-cells = <2>;
+ };
+
+ cpu_b1: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x500>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+ cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <65536>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <65536>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_cache_b1>;
+ dynamic-power-coefficient = <416>;
+ #cooling-cells = <2>;
+ };
+
+ cpu_b2: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x600>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+ assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+ assigned-clock-rates = <816000000>;
+ cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <65536>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <65536>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_cache_b2>;
+ dynamic-power-coefficient = <416>;
+ #cooling-cells = <2>;
+ };
+
+ cpu_b3: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a76";
+ reg = <0x700>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+ cpu-idle-states = <&CPU_SLEEP>;
+ i-cache-size = <65536>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <65536>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&l2_cache_b3>;
+ dynamic-power-coefficient = <416>;
+ #cooling-cells = <2>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <100>;
+ exit-latency-us = <120>;
+ min-residency-us = <1000>;
+ };
+ };
+
+ l2_cache_l0: l2-cache-l0 {
+ compatible = "cache";
+ cache-size = <131072>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+
+ l2_cache_l1: l2-cache-l1 {
+ compatible = "cache";
+ cache-size = <131072>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+
+ l2_cache_l2: l2-cache-l2 {
+ compatible = "cache";
+ cache-size = <131072>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+
+ l2_cache_l3: l2-cache-l3 {
+ compatible = "cache";
+ cache-size = <131072>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+
+ l2_cache_b0: l2-cache-b0 {
+ compatible = "cache";
+ cache-size = <524288>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+
+ l2_cache_b1: l2-cache-b1 {
+ compatible = "cache";
+ cache-size = <524288>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+
+ l2_cache_b2: l2-cache-b2 {
+ compatible = "cache";
+ cache-size = <524288>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+
+ l2_cache_b3: l2-cache-b3 {
+ compatible = "cache";
+ cache-size = <524288>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ cache-level = <2>;
+ cache-unified;
+ next-level-cache = <&l3_cache>;
+ };
+
+ l3_cache: l3-cache {
+ compatible = "cache";
+ cache-size = <3145728>;
+ cache-line-size = <64>;
+ cache-sets = <4096>;
+ cache-level = <3>;
+ cache-unified;
+ };
+ };
+
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
+ firmware {
+ optee: optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+
+ scmi: scmi {
+ compatible = "arm,scmi-smc";
+ arm,smc-id = <0x82000010>;
+ shmem = <&scmi_shmem>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+
+ scmi_reset: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+ };
+
+ pmu-a55 {
+ compatible = "arm,cortex-a55-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition0>;
+ };
+
+ pmu-a76 {
+ compatible = "arm,cortex-a76-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ spll: clock-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <702000000>;
+ clock-output-names = "spll";
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+ };
+
+ xin24m: clock-1 {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ xin32k: clock-2 {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ #clock-cells = <0>;
+ };
+
+ pmu_sram: sram@10f000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x0010f000 0x0 0x100>;
+ ranges = <0 0x0 0x0010f000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scmi_shmem: sram@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0x100>;
+ };
+ };
+
+ gpu: gpu@fb000000 {
+ compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf";
+ reg = <0x0 0xfb000000 0x0 0x200000>;
+ #cooling-cells = <2>;
+ assigned-clocks = <&scmi_clk SCMI_CLK_GPU>;
+ assigned-clock-rates = <200000000>;
+ clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>,
+ <&cru CLK_GPU_STACKS>;
+ clock-names = "core", "coregroup", "stacks";
+ dynamic-power-coefficient = <2982>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "job", "mmu", "gpu";
+ operating-points-v2 = <&gpu_opp_table>;
+ power-domains = <&power RK3588_PD_GPU>;
+ status = "disabled";
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <675000 675000 850000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <675000 675000 850000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <675000 675000 850000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <675000 675000 850000>;
+ };
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <700000 700000 850000>;
+ };
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <750000 750000 850000>;
+ };
+ opp-900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <800000 800000 850000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <850000 850000 850000>;
+ };
+ };
+ };
+
+ usb_host0_xhci: usb@fc000000 {
+ compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
+ reg = <0x0 0xfc000000 0x0 0x400000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>,
+ <&cru ACLK_USB3OTG0>;
+ clock-names = "ref_clk", "suspend_clk", "bus_clk";
+ dr_mode = "otg";
+ phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>;
+ phy-names = "usb2-phy", "usb3-phy";
+ phy_type = "utmi_wide";
+ power-domains = <&power RK3588_PD_USB>;
+ resets = <&cru SRST_A_USB3OTG0>;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ status = "disabled";
+ };
+
+ usb_host0_ehci: usb@fc800000 {
+ compatible = "rockchip,rk3588-ehci", "generic-ehci";
+ reg = <0x0 0xfc800000 0x0 0x40000>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>;
+ phys = <&u2phy2_host>;
+ phy-names = "usb";
+ power-domains = <&power RK3588_PD_USB>;
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@fc840000 {
+ compatible = "rockchip,rk3588-ohci", "generic-ohci";
+ reg = <0x0 0xfc840000 0x0 0x40000>;
+ interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>;
+ phys = <&u2phy2_host>;
+ phy-names = "usb";
+ power-domains = <&power RK3588_PD_USB>;
+ status = "disabled";
+ };
+
+ usb_host1_ehci: usb@fc880000 {
+ compatible = "rockchip,rk3588-ehci", "generic-ehci";
+ reg = <0x0 0xfc880000 0x0 0x40000>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>;
+ phys = <&u2phy3_host>;
+ phy-names = "usb";
+ power-domains = <&power RK3588_PD_USB>;
+ status = "disabled";
+ };
+
+ usb_host1_ohci: usb@fc8c0000 {
+ compatible = "rockchip,rk3588-ohci", "generic-ohci";
+ reg = <0x0 0xfc8c0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>;
+ phys = <&u2phy3_host>;
+ phy-names = "usb";
+ power-domains = <&power RK3588_PD_USB>;
+ status = "disabled";
+ };
+
+ usb_host2_xhci: usb@fcd00000 {
+ compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
+ reg = <0x0 0xfcd00000 0x0 0x400000>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru REF_CLK_USB3OTG2>, <&cru SUSPEND_CLK_USB3OTG2>,
+ <&cru ACLK_USB3OTG2>, <&cru CLK_UTMI_OTG2>,
+ <&cru CLK_PIPEPHY2_PIPE_U3_G>;
+ clock-names = "ref_clk", "suspend_clk", "bus_clk", "utmi", "pipe";
+ dr_mode = "host";
+ phys = <&combphy2_psu PHY_TYPE_USB3>;
+ phy-names = "usb3-phy";
+ phy_type = "utmi_wide";
+ resets = <&cru SRST_A_USB3OTG2>;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ snps,dis_rxdet_inp3_quirk;
+ status = "disabled";
+ };
+
+ mmu600_pcie: iommu@fc900000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x0 0xfc900000 0x0 0x200000>;
+ interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ mmu600_php: iommu@fcb00000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x0 0xfcb00000 0x0 0x200000>;
+ interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ pmu1grf: syscon@fd58a000 {
+ compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd";
+ reg = <0x0 0xfd58a000 0x0 0x10000>;
+ };
+
+ sys_grf: syscon@fd58c000 {
+ compatible = "rockchip,rk3588-sys-grf", "syscon";
+ reg = <0x0 0xfd58c000 0x0 0x1000>;
+ };
+
+ vop_grf: syscon@fd5a4000 {
+ compatible = "rockchip,rk3588-vop-grf", "syscon";
+ reg = <0x0 0xfd5a4000 0x0 0x2000>;
+ };
+
+ vo0_grf: syscon@fd5a6000 {
+ compatible = "rockchip,rk3588-vo-grf", "syscon";
+ reg = <0x0 0xfd5a6000 0x0 0x2000>;
+ clocks = <&cru PCLK_VO0GRF>;
+ };
+
+ vo1_grf: syscon@fd5a8000 {
+ compatible = "rockchip,rk3588-vo-grf", "syscon";
+ reg = <0x0 0xfd5a8000 0x0 0x100>;
+ clocks = <&cru PCLK_VO1GRF>;
+ };
+
+ usb_grf: syscon@fd5ac000 {
+ compatible = "rockchip,rk3588-usb-grf", "syscon";
+ reg = <0x0 0xfd5ac000 0x0 0x4000>;
+ };
+
+ php_grf: syscon@fd5b0000 {
+ compatible = "rockchip,rk3588-php-grf", "syscon";
+ reg = <0x0 0xfd5b0000 0x0 0x1000>;
+ };
+
+ pipe_phy0_grf: syscon@fd5bc000 {
+ compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
+ reg = <0x0 0xfd5bc000 0x0 0x100>;
+ };
+
+ pipe_phy2_grf: syscon@fd5c4000 {
+ compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
+ reg = <0x0 0xfd5c4000 0x0 0x100>;
+ };
+
+ usbdpphy0_grf: syscon@fd5c8000 {
+ compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
+ reg = <0x0 0xfd5c8000 0x0 0x4000>;
+ };
+
+ usb2phy0_grf: syscon@fd5d0000 {
+ compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xfd5d0000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy0: usb2phy@0 {
+ compatible = "rockchip,rk3588-usb2phy";
+ reg = <0x0 0x10>;
+ #clock-cells = <0>;
+ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "usb480m_phy0";
+ interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>;
+ resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>;
+ reset-names = "phy", "apb";
+ status = "disabled";
+
+ u2phy0_otg: otg-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
+ usb2phy2_grf: syscon@fd5d8000 {
+ compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xfd5d8000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy2: usb2phy@8000 {
+ compatible = "rockchip,rk3588-usb2phy";
+ reg = <0x8000 0x10>;
+ #clock-cells = <0>;
+ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "usb480m_phy2";
+ interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
+ resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>;
+ reset-names = "phy", "apb";
+ status = "disabled";
+
+ u2phy2_host: host-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
+ usb2phy3_grf: syscon@fd5dc000 {
+ compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xfd5dc000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy3: usb2phy@c000 {
+ compatible = "rockchip,rk3588-usb2phy";
+ reg = <0xc000 0x10>;
+ #clock-cells = <0>;
+ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "usb480m_phy3";
+ interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
+ resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>;
+ reset-names = "phy", "apb";
+ status = "disabled";
+
+ u2phy3_host: host-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
+ hdptxphy0_grf: syscon@fd5e0000 {
+ compatible = "rockchip,rk3588-hdptxphy-grf", "syscon";
+ reg = <0x0 0xfd5e0000 0x0 0x100>;
+ };
+
+ ioc: syscon@fd5f0000 {
+ compatible = "rockchip,rk3588-ioc", "syscon";
+ reg = <0x0 0xfd5f0000 0x0 0x10000>;
+ };
+
+ system_sram1: sram@fd600000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0xfd600000 0x0 0x100000>;
+ ranges = <0x0 0x0 0xfd600000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ cru: clock-controller@fd7c0000 {
+ compatible = "rockchip,rk3588-cru";
+ reg = <0x0 0xfd7c0000 0x0 0x5c000>;
+ assigned-clocks =
+ <&cru PLL_PPLL>, <&cru PLL_AUPLL>,
+ <&cru PLL_NPLL>, <&cru PLL_GPLL>,
+ <&cru ACLK_CENTER_ROOT>,
+ <&cru HCLK_CENTER_ROOT>, <&cru ACLK_CENTER_LOW_ROOT>,
+ <&cru ACLK_TOP_ROOT>, <&cru PCLK_TOP_ROOT>,
+ <&cru ACLK_LOW_TOP_ROOT>, <&cru PCLK_PMU0_ROOT>,
+ <&cru HCLK_PMU_CM0_ROOT>, <&cru ACLK_VOP>,
+ <&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>,
+ <&cru CLK_GPU>;
+ assigned-clock-rates =
+ <1100000000>, <786432000>,
+ <850000000>, <1188000000>,
+ <702000000>,
+ <400000000>, <500000000>,
+ <800000000>, <100000000>,
+ <400000000>, <100000000>,
+ <200000000>, <500000000>,
+ <375000000>, <150000000>,
+ <200000000>;
+ rockchip,grf = <&php_grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ i2c0: i2c@fd880000 {
+ compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfd880000 0x0 0x1000>;
+ interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>;
+ clock-names = "i2c", "pclk";
+ pinctrl-0 = <&i2c0m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart0: serial@fd890000 {
+ compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfd890000 0x0 0x100>;
+ interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 6>, <&dmac0 7>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&uart0m1_xfer>;
+ pinctrl-names = "default";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@fd8b0000 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfd8b0000 0x0 0x10>;
+ clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm0m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@fd8b0010 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfd8b0010 0x0 0x10>;
+ clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm1m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@fd8b0020 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfd8b0020 0x0 0x10>;
+ clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm2m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@fd8b0030 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfd8b0030 0x0 0x10>;
+ clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm3m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pmu: power-management@fd8d8000 {
+ compatible = "rockchip,rk3588-pmu", "syscon", "simple-mfd";
+ reg = <0x0 0xfd8d8000 0x0 0x400>;
+
+ power: power-controller {
+ compatible = "rockchip,rk3588-power-controller";
+ #address-cells = <1>;
+ #power-domain-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ /* These power domains are grouped by VD_NPU */
+ power-domain@RK3588_PD_NPU {
+ reg = <RK3588_PD_NPU>;
+ #power-domain-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RK3588_PD_NPUTOP {
+ reg = <RK3588_PD_NPUTOP>;
+ clocks = <&cru HCLK_NPU_ROOT>,
+ <&cru PCLK_NPU_ROOT>,
+ <&cru CLK_NPU_DSU0>,
+ <&cru HCLK_NPU_CM0_ROOT>;
+ pm_qos = <&qos_npu0_mwr>,
+ <&qos_npu0_mro>,
+ <&qos_mcu_npu>;
+ #power-domain-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RK3588_PD_NPU1 {
+ reg = <RK3588_PD_NPU1>;
+ clocks = <&cru HCLK_NPU_ROOT>,
+ <&cru PCLK_NPU_ROOT>,
+ <&cru CLK_NPU_DSU0>;
+ pm_qos = <&qos_npu1>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_NPU2 {
+ reg = <RK3588_PD_NPU2>;
+ clocks = <&cru HCLK_NPU_ROOT>,
+ <&cru PCLK_NPU_ROOT>,
+ <&cru CLK_NPU_DSU0>;
+ pm_qos = <&qos_npu2>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ /* These power domains are grouped by VD_GPU */
+ power-domain@RK3588_PD_GPU {
+ reg = <RK3588_PD_GPU>;
+ clocks = <&cru CLK_GPU>,
+ <&cru CLK_GPU_COREGROUP>,
+ <&cru CLK_GPU_STACKS>;
+ pm_qos = <&qos_gpu_m0>,
+ <&qos_gpu_m1>,
+ <&qos_gpu_m2>,
+ <&qos_gpu_m3>;
+ #power-domain-cells = <0>;
+ };
+ /* These power domains are grouped by VD_VCODEC */
+ power-domain@RK3588_PD_VCODEC {
+ reg = <RK3588_PD_VCODEC>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ power-domain@RK3588_PD_RKVDEC0 {
+ reg = <RK3588_PD_RKVDEC0>;
+ clocks = <&cru HCLK_RKVDEC0>,
+ <&cru HCLK_VDPU_ROOT>,
+ <&cru ACLK_VDPU_ROOT>,
+ <&cru ACLK_RKVDEC0>,
+ <&cru ACLK_RKVDEC_CCU>;
+ pm_qos = <&qos_rkvdec0>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_RKVDEC1 {
+ reg = <RK3588_PD_RKVDEC1>;
+ clocks = <&cru HCLK_RKVDEC1>,
+ <&cru HCLK_VDPU_ROOT>,
+ <&cru ACLK_VDPU_ROOT>,
+ <&cru ACLK_RKVDEC1>;
+ pm_qos = <&qos_rkvdec1>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_VENC0 {
+ reg = <RK3588_PD_VENC0>;
+ clocks = <&cru HCLK_RKVENC0>,
+ <&cru ACLK_RKVENC0>;
+ pm_qos = <&qos_rkvenc0_m0ro>,
+ <&qos_rkvenc0_m1ro>,
+ <&qos_rkvenc0_m2wo>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ power-domain@RK3588_PD_VENC1 {
+ reg = <RK3588_PD_VENC1>;
+ clocks = <&cru HCLK_RKVENC1>,
+ <&cru HCLK_RKVENC0>,
+ <&cru ACLK_RKVENC0>,
+ <&cru ACLK_RKVENC1>;
+ pm_qos = <&qos_rkvenc1_m0ro>,
+ <&qos_rkvenc1_m1ro>,
+ <&qos_rkvenc1_m2wo>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ /* These power domains are grouped by VD_LOGIC */
+ power-domain@RK3588_PD_VDPU {
+ reg = <RK3588_PD_VDPU>;
+ clocks = <&cru HCLK_VDPU_ROOT>,
+ <&cru ACLK_VDPU_LOW_ROOT>,
+ <&cru ACLK_VDPU_ROOT>,
+ <&cru ACLK_JPEG_DECODER_ROOT>,
+ <&cru ACLK_IEP2P0>,
+ <&cru HCLK_IEP2P0>,
+ <&cru ACLK_JPEG_ENCODER0>,
+ <&cru HCLK_JPEG_ENCODER0>,
+ <&cru ACLK_JPEG_ENCODER1>,
+ <&cru HCLK_JPEG_ENCODER1>,
+ <&cru ACLK_JPEG_ENCODER2>,
+ <&cru HCLK_JPEG_ENCODER2>,
+ <&cru ACLK_JPEG_ENCODER3>,
+ <&cru HCLK_JPEG_ENCODER3>,
+ <&cru ACLK_JPEG_DECODER>,
+ <&cru HCLK_JPEG_DECODER>,
+ <&cru ACLK_RGA2>,
+ <&cru HCLK_RGA2>;
+ pm_qos = <&qos_iep>,
+ <&qos_jpeg_dec>,
+ <&qos_jpeg_enc0>,
+ <&qos_jpeg_enc1>,
+ <&qos_jpeg_enc2>,
+ <&qos_jpeg_enc3>,
+ <&qos_rga2_mro>,
+ <&qos_rga2_mwo>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+
+ power-domain@RK3588_PD_AV1 {
+ reg = <RK3588_PD_AV1>;
+ clocks = <&cru PCLK_AV1>,
+ <&cru ACLK_AV1>,
+ <&cru HCLK_VDPU_ROOT>;
+ pm_qos = <&qos_av1>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_RKVDEC0 {
+ reg = <RK3588_PD_RKVDEC0>;
+ clocks = <&cru HCLK_RKVDEC0>,
+ <&cru HCLK_VDPU_ROOT>,
+ <&cru ACLK_VDPU_ROOT>,
+ <&cru ACLK_RKVDEC0>;
+ pm_qos = <&qos_rkvdec0>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_RKVDEC1 {
+ reg = <RK3588_PD_RKVDEC1>;
+ clocks = <&cru HCLK_RKVDEC1>,
+ <&cru HCLK_VDPU_ROOT>,
+ <&cru ACLK_VDPU_ROOT>;
+ pm_qos = <&qos_rkvdec1>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_RGA30 {
+ reg = <RK3588_PD_RGA30>;
+ clocks = <&cru ACLK_RGA3_0>,
+ <&cru HCLK_RGA3_0>;
+ pm_qos = <&qos_rga3_0>;
+ #power-domain-cells = <0>;
+ };
+ };
+ power-domain@RK3588_PD_VOP {
+ reg = <RK3588_PD_VOP>;
+ clocks = <&cru PCLK_VOP_ROOT>,
+ <&cru HCLK_VOP_ROOT>,
+ <&cru ACLK_VOP>;
+ pm_qos = <&qos_vop_m0>,
+ <&qos_vop_m1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ power-domain@RK3588_PD_VO0 {
+ reg = <RK3588_PD_VO0>;
+ clocks = <&cru PCLK_VO0_ROOT>,
+ <&cru PCLK_VO0_S_ROOT>,
+ <&cru HCLK_VO0_S_ROOT>,
+ <&cru ACLK_VO0_ROOT>,
+ <&cru HCLK_HDCP0>,
+ <&cru ACLK_HDCP0>,
+ <&cru HCLK_VOP_ROOT>;
+ pm_qos = <&qos_hdcp0>;
+ #power-domain-cells = <0>;
+ };
+ };
+ power-domain@RK3588_PD_VO1 {
+ reg = <RK3588_PD_VO1>;
+ clocks = <&cru PCLK_VO1_ROOT>,
+ <&cru PCLK_VO1_S_ROOT>,
+ <&cru HCLK_VO1_S_ROOT>,
+ <&cru HCLK_HDCP1>,
+ <&cru ACLK_HDCP1>,
+ <&cru ACLK_HDMIRX_ROOT>,
+ <&cru HCLK_VO1USB_TOP_ROOT>;
+ pm_qos = <&qos_hdcp1>,
+ <&qos_hdmirx>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_VI {
+ reg = <RK3588_PD_VI>;
+ clocks = <&cru HCLK_VI_ROOT>,
+ <&cru PCLK_VI_ROOT>,
+ <&cru HCLK_ISP0>,
+ <&cru ACLK_ISP0>,
+ <&cru HCLK_VICAP>,
+ <&cru ACLK_VICAP>;
+ pm_qos = <&qos_isp0_mro>,
+ <&qos_isp0_mwo>,
+ <&qos_vicap_m0>,
+ <&qos_vicap_m1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ power-domain@RK3588_PD_ISP1 {
+ reg = <RK3588_PD_ISP1>;
+ clocks = <&cru HCLK_ISP1>,
+ <&cru ACLK_ISP1>,
+ <&cru HCLK_VI_ROOT>,
+ <&cru PCLK_VI_ROOT>;
+ pm_qos = <&qos_isp1_mwo>,
+ <&qos_isp1_mro>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_FEC {
+ reg = <RK3588_PD_FEC>;
+ clocks = <&cru HCLK_FISHEYE0>,
+ <&cru ACLK_FISHEYE0>,
+ <&cru HCLK_FISHEYE1>,
+ <&cru ACLK_FISHEYE1>,
+ <&cru PCLK_VI_ROOT>;
+ pm_qos = <&qos_fisheye0>,
+ <&qos_fisheye1>;
+ #power-domain-cells = <0>;
+ };
+ };
+ power-domain@RK3588_PD_RGA31 {
+ reg = <RK3588_PD_RGA31>;
+ clocks = <&cru HCLK_RGA3_1>,
+ <&cru ACLK_RGA3_1>;
+ pm_qos = <&qos_rga3_1>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_USB {
+ reg = <RK3588_PD_USB>;
+ clocks = <&cru PCLK_PHP_ROOT>,
+ <&cru ACLK_USB_ROOT>,
+ <&cru ACLK_USB>,
+ <&cru HCLK_USB_ROOT>,
+ <&cru HCLK_HOST0>,
+ <&cru HCLK_HOST_ARB0>,
+ <&cru HCLK_HOST1>,
+ <&cru HCLK_HOST_ARB1>;
+ pm_qos = <&qos_usb3_0>,
+ <&qos_usb3_1>,
+ <&qos_usb2host_0>,
+ <&qos_usb2host_1>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_GMAC {
+ reg = <RK3588_PD_GMAC>;
+ clocks = <&cru PCLK_PHP_ROOT>,
+ <&cru ACLK_PCIE_ROOT>,
+ <&cru ACLK_PHP_ROOT>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_PCIE {
+ reg = <RK3588_PD_PCIE>;
+ clocks = <&cru PCLK_PHP_ROOT>,
+ <&cru ACLK_PCIE_ROOT>,
+ <&cru ACLK_PHP_ROOT>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_SDIO {
+ reg = <RK3588_PD_SDIO>;
+ clocks = <&cru HCLK_SDIO>,
+ <&cru HCLK_NVM_ROOT>;
+ pm_qos = <&qos_sdio>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_AUDIO {
+ reg = <RK3588_PD_AUDIO>;
+ clocks = <&cru HCLK_AUDIO_ROOT>,
+ <&cru PCLK_AUDIO_ROOT>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3588_PD_SDMMC {
+ reg = <RK3588_PD_SDMMC>;
+ pm_qos = <&qos_sdmmc>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+
+ av1d: video-codec@fdc70000 {
+ compatible = "rockchip,rk3588-av1-vpu";
+ reg = <0x0 0xfdc70000 0x0 0x800>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "vdpu";
+ assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
+ assigned-clock-rates = <400000000>, <400000000>;
+ clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
+ clock-names = "aclk", "hclk";
+ power-domains = <&power RK3588_PD_AV1>;
+ resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>;
+ };
+
+ vop: vop@fdd90000 {
+ compatible = "rockchip,rk3588-vop";
+ reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
+ reg-names = "vop", "gamma-lut";
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_VOP>,
+ <&cru HCLK_VOP>,
+ <&cru DCLK_VOP0>,
+ <&cru DCLK_VOP1>,
+ <&cru DCLK_VOP2>,
+ <&cru DCLK_VOP3>,
+ <&cru PCLK_VOP_ROOT>;
+ clock-names = "aclk",
+ "hclk",
+ "dclk_vp0",
+ "dclk_vp1",
+ "dclk_vp2",
+ "dclk_vp3",
+ "pclk_vop";
+ iommus = <&vop_mmu>;
+ power-domains = <&power RK3588_PD_VOP>;
+ rockchip,grf = <&sys_grf>;
+ rockchip,vop-grf = <&vop_grf>;
+ rockchip,vo1-grf = <&vo1_grf>;
+ rockchip,pmu = <&pmu>;
+ status = "disabled";
+
+ vop_out: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vp0: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ vp1: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ vp2: port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ vp3: port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+ };
+
+ vop_mmu: iommu@fdd97e00 {
+ compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+ reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+ clock-names = "aclk", "iface";
+ #iommu-cells = <0>;
+ power-domains = <&power RK3588_PD_VOP>;
+ status = "disabled";
+ };
+
+ i2s4_8ch: i2s@fddc0000 {
+ compatible = "rockchip,rk3588-i2s-tdm";
+ reg = <0x0 0xfddc0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru MCLK_I2S4_8CH_TX>, <&cru MCLK_I2S4_8CH_TX>, <&cru HCLK_I2S4_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ assigned-clocks = <&cru CLK_I2S4_8CH_TX_SRC>;
+ assigned-clock-parents = <&cru PLL_AUPLL>;
+ dmas = <&dmac2 0>;
+ dma-names = "tx";
+ power-domains = <&power RK3588_PD_VO0>;
+ resets = <&cru SRST_M_I2S4_8CH_TX>;
+ reset-names = "tx-m";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s5_8ch: i2s@fddf0000 {
+ compatible = "rockchip,rk3588-i2s-tdm";
+ reg = <0x0 0xfddf0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru MCLK_I2S5_8CH_TX>, <&cru MCLK_I2S5_8CH_TX>, <&cru HCLK_I2S5_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ assigned-clocks = <&cru CLK_I2S5_8CH_TX_SRC>;
+ assigned-clock-parents = <&cru PLL_AUPLL>;
+ dmas = <&dmac2 2>;
+ dma-names = "tx";
+ power-domains = <&power RK3588_PD_VO1>;
+ resets = <&cru SRST_M_I2S5_8CH_TX>;
+ reset-names = "tx-m";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s9_8ch: i2s@fddfc000 {
+ compatible = "rockchip,rk3588-i2s-tdm";
+ reg = <0x0 0xfddfc000 0x0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru MCLK_I2S9_8CH_RX>, <&cru MCLK_I2S9_8CH_RX>, <&cru HCLK_I2S9_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ assigned-clocks = <&cru CLK_I2S9_8CH_RX_SRC>;
+ assigned-clock-parents = <&cru PLL_AUPLL>;
+ dmas = <&dmac2 23>;
+ dma-names = "rx";
+ power-domains = <&power RK3588_PD_VO1>;
+ resets = <&cru SRST_M_I2S9_8CH_RX>;
+ reset-names = "rx-m";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ qos_gpu_m0: qos@fdf35000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf35000 0x0 0x20>;
+ };
+
+ qos_gpu_m1: qos@fdf35200 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf35200 0x0 0x20>;
+ };
+
+ qos_gpu_m2: qos@fdf35400 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf35400 0x0 0x20>;
+ };
+
+ qos_gpu_m3: qos@fdf35600 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf35600 0x0 0x20>;
+ };
+
+ qos_rga3_1: qos@fdf36000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf36000 0x0 0x20>;
+ };
+
+ qos_sdio: qos@fdf39000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf39000 0x0 0x20>;
+ };
+
+ qos_sdmmc: qos@fdf3d800 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf3d800 0x0 0x20>;
+ };
+
+ qos_usb3_1: qos@fdf3e000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf3e000 0x0 0x20>;
+ };
+
+ qos_usb3_0: qos@fdf3e200 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf3e200 0x0 0x20>;
+ };
+
+ qos_usb2host_0: qos@fdf3e400 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf3e400 0x0 0x20>;
+ };
+
+ qos_usb2host_1: qos@fdf3e600 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf3e600 0x0 0x20>;
+ };
+
+ qos_fisheye0: qos@fdf40000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf40000 0x0 0x20>;
+ };
+
+ qos_fisheye1: qos@fdf40200 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf40200 0x0 0x20>;
+ };
+
+ qos_isp0_mro: qos@fdf40400 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf40400 0x0 0x20>;
+ };
+
+ qos_isp0_mwo: qos@fdf40500 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf40500 0x0 0x20>;
+ };
+
+ qos_vicap_m0: qos@fdf40600 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf40600 0x0 0x20>;
+ };
+
+ qos_vicap_m1: qos@fdf40800 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf40800 0x0 0x20>;
+ };
+
+ qos_isp1_mwo: qos@fdf41000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf41000 0x0 0x20>;
+ };
+
+ qos_isp1_mro: qos@fdf41100 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf41100 0x0 0x20>;
+ };
+
+ qos_rkvenc0_m0ro: qos@fdf60000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf60000 0x0 0x20>;
+ };
+
+ qos_rkvenc0_m1ro: qos@fdf60200 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf60200 0x0 0x20>;
+ };
+
+ qos_rkvenc0_m2wo: qos@fdf60400 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf60400 0x0 0x20>;
+ };
+
+ qos_rkvenc1_m0ro: qos@fdf61000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf61000 0x0 0x20>;
+ };
+
+ qos_rkvenc1_m1ro: qos@fdf61200 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf61200 0x0 0x20>;
+ };
+
+ qos_rkvenc1_m2wo: qos@fdf61400 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf61400 0x0 0x20>;
+ };
+
+ qos_rkvdec0: qos@fdf62000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf62000 0x0 0x20>;
+ };
+
+ qos_rkvdec1: qos@fdf63000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf63000 0x0 0x20>;
+ };
+
+ qos_av1: qos@fdf64000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf64000 0x0 0x20>;
+ };
+
+ qos_iep: qos@fdf66000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf66000 0x0 0x20>;
+ };
+
+ qos_jpeg_dec: qos@fdf66200 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf66200 0x0 0x20>;
+ };
+
+ qos_jpeg_enc0: qos@fdf66400 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf66400 0x0 0x20>;
+ };
+
+ qos_jpeg_enc1: qos@fdf66600 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf66600 0x0 0x20>;
+ };
+
+ qos_jpeg_enc2: qos@fdf66800 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf66800 0x0 0x20>;
+ };
+
+ qos_jpeg_enc3: qos@fdf66a00 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf66a00 0x0 0x20>;
+ };
+
+ qos_rga2_mro: qos@fdf66c00 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf66c00 0x0 0x20>;
+ };
+
+ qos_rga2_mwo: qos@fdf66e00 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf66e00 0x0 0x20>;
+ };
+
+ qos_rga3_0: qos@fdf67000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf67000 0x0 0x20>;
+ };
+
+ qos_vdpu: qos@fdf67200 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf67200 0x0 0x20>;
+ };
+
+ qos_npu1: qos@fdf70000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf70000 0x0 0x20>;
+ };
+
+ qos_npu2: qos@fdf71000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf71000 0x0 0x20>;
+ };
+
+ qos_npu0_mwr: qos@fdf72000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf72000 0x0 0x20>;
+ };
+
+ qos_npu0_mro: qos@fdf72200 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf72200 0x0 0x20>;
+ };
+
+ qos_mcu_npu: qos@fdf72400 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf72400 0x0 0x20>;
+ };
+
+ qos_hdcp0: qos@fdf80000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf80000 0x0 0x20>;
+ };
+
+ qos_hdcp1: qos@fdf81000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf81000 0x0 0x20>;
+ };
+
+ qos_hdmirx: qos@fdf81200 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf81200 0x0 0x20>;
+ };
+
+ qos_vop_m0: qos@fdf82000 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf82000 0x0 0x20>;
+ };
+
+ qos_vop_m1: qos@fdf82200 {
+ compatible = "rockchip,rk3588-qos", "syscon";
+ reg = <0x0 0xfdf82200 0x0 0x20>;
+ };
+
+ dfi: dfi@fe060000 {
+ reg = <0x00 0xfe060000 0x00 0x10000>;
+ compatible = "rockchip,rk3588-dfi";
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+ rockchip,pmu = <&pmu1grf>;
+ };
+
+ pcie2x1l1: pcie@fe180000 {
+ compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+ bus-range = <0x30 0x3f>;
+ clocks = <&cru ACLK_PCIE_1L1_MSTR>, <&cru ACLK_PCIE_1L1_SLV>,
+ <&cru ACLK_PCIE_1L1_DBI>, <&cru PCLK_PCIE_1L1>,
+ <&cru CLK_PCIE_AUX3>, <&cru CLK_PCIE1L1_PIPE>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk",
+ "aux", "pipe";
+ device_type = "pci";
+ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie2x1l1_intc 0>,
+ <0 0 0 2 &pcie2x1l1_intc 1>,
+ <0 0 0 3 &pcie2x1l1_intc 2>,
+ <0 0 0 4 &pcie2x1l1_intc 3>;
+ linux,pci-domain = <3>;
+ max-link-speed = <2>;
+ msi-map = <0x3000 &its0 0x3000 0x1000>;
+ num-lanes = <1>;
+ phys = <&combphy2_psu PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy";
+ power-domains = <&power RK3588_PD_PCIE>;
+ ranges = <0x01000000 0x0 0xf3100000 0x0 0xf3100000 0x0 0x00100000>,
+ <0x02000000 0x0 0xf3200000 0x0 0xf3200000 0x0 0x00e00000>,
+ <0x03000000 0x0 0x40000000 0x9 0xc0000000 0x0 0x40000000>;
+ reg = <0xa 0x40c00000 0x0 0x00400000>,
+ <0x0 0xfe180000 0x0 0x00010000>,
+ <0x0 0xf3000000 0x0 0x00100000>;
+ reg-names = "dbi", "apb", "config";
+ resets = <&cru SRST_PCIE3_POWER_UP>, <&cru SRST_P_PCIE3>;
+ reset-names = "pwr", "pipe";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
+ pcie2x1l1_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 245 IRQ_TYPE_EDGE_RISING 0>;
+ };
+ };
+
+ pcie2x1l2: pcie@fe190000 {
+ compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+ bus-range = <0x40 0x4f>;
+ clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>,
+ <&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>,
+ <&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk",
+ "aux", "pipe";
+ device_type = "pci";
+ interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>,
+ <0 0 0 2 &pcie2x1l2_intc 1>,
+ <0 0 0 3 &pcie2x1l2_intc 2>,
+ <0 0 0 4 &pcie2x1l2_intc 3>;
+ linux,pci-domain = <4>;
+ max-link-speed = <2>;
+ msi-map = <0x4000 &its0 0x4000 0x1000>;
+ num-lanes = <1>;
+ phys = <&combphy0_ps PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy";
+ power-domains = <&power RK3588_PD_PCIE>;
+ ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
+ <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>,
+ <0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>;
+ reg = <0xa 0x41000000 0x0 0x00400000>,
+ <0x0 0xfe190000 0x0 0x00010000>,
+ <0x0 0xf4000000 0x0 0x00100000>;
+ reg-names = "dbi", "apb", "config";
+ resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>;
+ reset-names = "pwr", "pipe";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
+ pcie2x1l2_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING 0>;
+ };
+ };
+
+ gmac1: ethernet@fe1c0000 {
+ compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
+ reg = <0x0 0xfe1c0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
+ <&cru PCLK_GMAC1>, <&cru ACLK_GMAC1>,
+ <&cru CLK_GMAC1_PTP_REF>;
+ clock-names = "stmmaceth", "clk_mac_ref",
+ "pclk_mac", "aclk_mac",
+ "ptp_ref";
+ power-domains = <&power RK3588_PD_GMAC>;
+ resets = <&cru SRST_A_GMAC1>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&sys_grf>;
+ rockchip,php-grf = <&php_grf>;
+ snps,axi-config = <&gmac1_stmmac_axi_setup>;
+ snps,mixed-burst;
+ snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+ snps,tso;
+ status = "disabled";
+
+ mdio1: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
+
+ gmac1_stmmac_axi_setup: stmmac-axi-config {
+ snps,blen = <0 0 0 0 16 8 4>;
+ snps,wr_osr_lmt = <4>;
+ snps,rd_osr_lmt = <8>;
+ };
+
+ gmac1_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <2>;
+ queue0 {};
+ queue1 {};
+ };
+
+ gmac1_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <2>;
+ queue0 {};
+ queue1 {};
+ };
+ };
+
+ sata0: sata@fe210000 {
+ compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+ reg = <0 0xfe210000 0 0x1000>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
+ <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
+ <&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
+ clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+ ports-implemented = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata-port@0 {
+ reg = <0>;
+ hba-port-cap = <HBA_PORT_FBSCP>;
+ phys = <&combphy0_ps PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ snps,rx-ts-max = <32>;
+ snps,tx-ts-max = <32>;
+ };
+ };
+
+ sata2: sata@fe230000 {
+ compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+ reg = <0 0xfe230000 0 0x1000>;
+ interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>,
+ <&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>,
+ <&cru CLK_PIPEPHY2_PIPE_ASIC_G>;
+ clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+ ports-implemented = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata-port@0 {
+ reg = <0>;
+ hba-port-cap = <HBA_PORT_FBSCP>;
+ phys = <&combphy2_psu PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ snps,rx-ts-max = <32>;
+ snps,tx-ts-max = <32>;
+ };
+ };
+
+ sfc: spi@fe2b0000 {
+ compatible = "rockchip,sfc";
+ reg = <0x0 0xfe2b0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+ clock-names = "clk_sfc", "hclk_sfc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ sdmmc: mmc@fe2c0000 {
+ compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xfe2c0000 0x0 0x4000>;
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&scmi_clk SCMI_HCLK_SD>, <&scmi_clk SCMI_CCLK_SD>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <200000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+ power-domains = <&power RK3588_PD_SDMMC>;
+ status = "disabled";
+ };
+
+ sdio: mmc@fe2d0000 {
+ compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x00 0xfe2d0000 0x00 0x4000>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <200000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdiom1_pins>;
+ power-domains = <&power RK3588_PD_SDIO>;
+ status = "disabled";
+ };
+
+ sdhci: mmc@fe2e0000 {
+ compatible = "rockchip,rk3588-dwcmshc";
+ reg = <0x0 0xfe2e0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>;
+ assigned-clocks = <&cru BCLK_EMMC>, <&cru TMCLK_EMMC>, <&cru CCLK_EMMC>;
+ assigned-clock-rates = <200000000>, <24000000>, <200000000>;
+ clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
+ <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
+ <&cru TMCLK_EMMC>;
+ clock-names = "core", "bus", "axi", "block", "timer";
+ max-frequency = <200000000>;
+ pinctrl-0 = <&emmc_rstnout>, <&emmc_bus8>, <&emmc_clk>,
+ <&emmc_cmd>, <&emmc_data_strobe>;
+ pinctrl-names = "default";
+ resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>,
+ <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
+ <&cru SRST_T_EMMC>;
+ reset-names = "core", "bus", "axi", "block", "timer";
+ status = "disabled";
+ };
+
+ i2s0_8ch: i2s@fe470000 {
+ compatible = "rockchip,rk3588-i2s-tdm";
+ reg = <0x0 0xfe470000 0x0 0x1000>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
+ assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>;
+ dmas = <&dmac0 0>, <&dmac0 1>;
+ dma-names = "tx", "rx";
+ power-domains = <&power RK3588_PD_AUDIO>;
+ resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
+ reset-names = "tx-m", "rx-m";
+ rockchip,trcm-sync-tx-only;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdi1
+ &i2s0_sdi2
+ &i2s0_sdi3
+ &i2s0_sdo0
+ &i2s0_sdo1
+ &i2s0_sdo2
+ &i2s0_sdo3>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s1_8ch: i2s@fe480000 {
+ compatible = "rockchip,rk3588-i2s-tdm";
+ reg = <0x0 0xfe480000 0x0 0x1000>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ dmas = <&dmac0 2>, <&dmac0 3>;
+ dma-names = "tx", "rx";
+ resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
+ reset-names = "tx-m", "rx-m";
+ rockchip,trcm-sync-tx-only;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_lrck
+ &i2s1m0_sclk
+ &i2s1m0_sdi0
+ &i2s1m0_sdi1
+ &i2s1m0_sdi2
+ &i2s1m0_sdi3
+ &i2s1m0_sdo0
+ &i2s1m0_sdo1
+ &i2s1m0_sdo2
+ &i2s1m0_sdo3>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s2_2ch: i2s@fe490000 {
+ compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xfe490000 0x0 0x1000>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ assigned-clocks = <&cru CLK_I2S2_2CH_SRC>;
+ assigned-clock-parents = <&cru PLL_AUPLL>;
+ dmas = <&dmac1 0>, <&dmac1 1>;
+ dma-names = "tx", "rx";
+ power-domains = <&power RK3588_PD_AUDIO>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2m1_lrck
+ &i2s2m1_sclk
+ &i2s2m1_sdi
+ &i2s2m1_sdo>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s3_2ch: i2s@fe4a0000 {
+ compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xfe4a0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ assigned-clocks = <&cru CLK_I2S3_2CH_SRC>;
+ assigned-clock-parents = <&cru PLL_AUPLL>;
+ dmas = <&dmac1 2>, <&dmac1 3>;
+ dma-names = "tx", "rx";
+ power-domains = <&power RK3588_PD_AUDIO>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s3_lrck
+ &i2s3_sclk
+ &i2s3_sdi
+ &i2s3_sdo>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@fe600000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0xfe600000 0 0x10000>, /* GICD */
+ <0x0 0xfe680000 0 0x100000>; /* GICR */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-controller;
+ mbi-alias = <0x0 0xfe610000>;
+ mbi-ranges = <424 56>;
+ msi-controller;
+ ranges;
+ #address-cells = <2>;
+ #interrupt-cells = <4>;
+ #size-cells = <2>;
+
+ its0: msi-controller@fe640000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0xfe640000 0x0 0x20000>;
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ its1: msi-controller@fe660000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0xfe660000 0x0 0x20000>;
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ ppi-partitions {
+ ppi_partition0: interrupt-partition-0 {
+ affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
+ };
+
+ ppi_partition1: interrupt-partition-1 {
+ affinity = <&cpu_b0 &cpu_b1 &cpu_b2 &cpu_b3>;
+ };
+ };
+ };
+
+ dmac0: dma-controller@fea10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xfea10000 0x0 0x4000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH 0>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
+ dmac1: dma-controller@fea30000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xfea30000 0x0 0x4000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH 0>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
+ i2c1: i2c@fea90000 {
+ compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfea90000 0x0 0x1000>;
+ clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&i2c1m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@feaa0000 {
+ compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfeaa0000 0x0 0x1000>;
+ clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&i2c2m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@feab0000 {
+ compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfeab0000 0x0 0x1000>;
+ clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&i2c3m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@feac0000 {
+ compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfeac0000 0x0 0x1000>;
+ clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&i2c4m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@fead0000 {
+ compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfead0000 0x0 0x1000>;
+ clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&i2c5m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ timer0: timer@feae0000 {
+ compatible = "rockchip,rk3588-timer", "rockchip,rk3288-timer";
+ reg = <0x0 0xfeae0000 0x0 0x20>;
+ interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_BUSTIMER0>, <&cru CLK_BUSTIMER0>;
+ clock-names = "pclk", "timer";
+ };
+
+ wdt: watchdog@feaf0000 {
+ compatible = "rockchip,rk3588-wdt", "snps,dw-wdt";
+ reg = <0x0 0xfeaf0000 0x0 0x100>;
+ clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>;
+ clock-names = "tclk", "pclk";
+ interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ spi0: spi@feb00000 {
+ compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xfeb00000 0x0 0x1000>;
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac0 14>, <&dmac0 15>;
+ dma-names = "tx", "rx";
+ num-cs = <2>;
+ pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@feb10000 {
+ compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xfeb10000 0x0 0x1000>;
+ interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac0 16>, <&dmac0 17>;
+ dma-names = "tx", "rx";
+ num-cs = <2>;
+ pinctrl-0 = <&spi1m1_cs0 &spi1m1_cs1 &spi1m1_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@feb20000 {
+ compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xfeb20000 0x0 0x1000>;
+ interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac1 15>, <&dmac1 16>;
+ dma-names = "tx", "rx";
+ num-cs = <2>;
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_cs1 &spi2m2_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi3: spi@feb30000 {
+ compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xfeb30000 0x0 0x1000>;
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac1 17>, <&dmac1 18>;
+ dma-names = "tx", "rx";
+ num-cs = <2>;
+ pinctrl-0 = <&spi3m1_cs0 &spi3m1_cs1 &spi3m1_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart1: serial@feb40000 {
+ compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfeb40000 0x0 0x100>;
+ interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 8>, <&dmac0 9>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&uart1m1_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart2: serial@feb50000 {
+ compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfeb50000 0x0 0x100>;
+ interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 10>, <&dmac0 11>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&uart2m1_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart3: serial@feb60000 {
+ compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfeb60000 0x0 0x100>;
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac0 12>, <&dmac0 13>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&uart3m1_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart4: serial@feb70000 {
+ compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfeb70000 0x0 0x100>;
+ interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac1 9>, <&dmac1 10>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&uart4m1_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart5: serial@feb80000 {
+ compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfeb80000 0x0 0x100>;
+ interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac1 11>, <&dmac1 12>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&uart5m1_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart6: serial@feb90000 {
+ compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfeb90000 0x0 0x100>;
+ interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac1 13>, <&dmac1 14>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&uart6m1_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart7: serial@feba0000 {
+ compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfeba0000 0x0 0x100>;
+ interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac2 7>, <&dmac2 8>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&uart7m1_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart8: serial@febb0000 {
+ compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfebb0000 0x0 0x100>;
+ interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac2 9>, <&dmac2 10>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&uart8m1_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ uart9: serial@febc0000 {
+ compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xfebc0000 0x0 0x100>;
+ interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac2 11>, <&dmac2 12>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&uart9m1_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@febd0000 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfebd0000 0x0 0x10>;
+ clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm4m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@febd0010 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfebd0010 0x0 0x10>;
+ clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm5m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@febd0020 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfebd0020 0x0 0x10>;
+ clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm6m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm7: pwm@febd0030 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfebd0030 0x0 0x10>;
+ clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm7m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm8: pwm@febe0000 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfebe0000 0x0 0x10>;
+ clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm8m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm9: pwm@febe0010 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfebe0010 0x0 0x10>;
+ clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm9m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm10: pwm@febe0020 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfebe0020 0x0 0x10>;
+ clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm10m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm11: pwm@febe0030 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfebe0030 0x0 0x10>;
+ clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm11m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm12: pwm@febf0000 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfebf0000 0x0 0x10>;
+ clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm12m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm13: pwm@febf0010 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfebf0010 0x0 0x10>;
+ clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm13m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm14: pwm@febf0020 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfebf0020 0x0 0x10>;
+ clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm14m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm15: pwm@febf0030 {
+ compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xfebf0030 0x0 0x10>;
+ clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+ clock-names = "pwm", "pclk";
+ pinctrl-0 = <&pwm15m0_pins>;
+ pinctrl-names = "default";
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ thermal_zones: thermal-zones {
+ /* sensor near the center of the SoC */
+ package_thermal: package-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ package_crit: package-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ /* sensor between A76 cores 0 and 1 */
+ bigcore0_thermal: bigcore0-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 1>;
+
+ trips {
+ bigcore0_alert: bigcore0-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ bigcore0_crit: bigcore0-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&bigcore0_alert>;
+ cooling-device =
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ /* sensor between A76 cores 2 and 3 */
+ bigcore2_thermal: bigcore2-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 2>;
+
+ trips {
+ bigcore2_alert: bigcore2-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ bigcore2_crit: bigcore2-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&bigcore2_alert>;
+ cooling-device =
+ <&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ /* sensor between the four A55 cores */
+ little_core_thermal: littlecore-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 3>;
+
+ trips {
+ littlecore_alert: littlecore-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ littlecore_crit: littlecore-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&littlecore_alert>;
+ cooling-device =
+ <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ /* sensor near the PD_CENTER power domain */
+ center_thermal: center-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 4>;
+
+ trips {
+ center_crit: center-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 5>;
+
+ trips {
+ gpu_crit: gpu-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ npu_thermal: npu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsadc 6>;
+
+ trips {
+ npu_crit: npu-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ tsadc: tsadc@fec00000 {
+ compatible = "rockchip,rk3588-tsadc";
+ reg = <0x0 0xfec00000 0x0 0x400>;
+ interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ assigned-clocks = <&cru CLK_TSADC>;
+ assigned-clock-rates = <2000000>;
+ resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb", "tsadc";
+ rockchip,hw-tshut-temp = <120000>;
+ rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+ pinctrl-0 = <&tsadc_gpio_func>;
+ pinctrl-1 = <&tsadc_shut>;
+ pinctrl-names = "gpio", "otpout";
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
+ saradc: adc@fec10000 {
+ compatible = "rockchip,rk3588-saradc";
+ reg = <0x0 0xfec10000 0x0 0x10000>;
+ interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>;
+ #io-channel-cells = <1>;
+ clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_P_SARADC>;
+ reset-names = "saradc-apb";
+ status = "disabled";
+ };
+
+ i2c6: i2c@fec80000 {
+ compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfec80000 0x0 0x1000>;
+ clocks = <&cru CLK_I2C6>, <&cru PCLK_I2C6>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&i2c6m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@fec90000 {
+ compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfec90000 0x0 0x1000>;
+ clocks = <&cru CLK_I2C7>, <&cru PCLK_I2C7>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&i2c7m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@feca0000 {
+ compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xfeca0000 0x0 0x1000>;
+ clocks = <&cru CLK_I2C8>, <&cru PCLK_I2C8>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-0 = <&i2c8m0_xfer>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi4: spi@fecb0000 {
+ compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xfecb0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru CLK_SPI4>, <&cru PCLK_SPI4>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac2 13>, <&dmac2 14>;
+ dma-names = "tx", "rx";
+ num-cs = <2>;
+ pinctrl-0 = <&spi4m0_cs0 &spi4m0_cs1 &spi4m0_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ otp: efuse@fecc0000 {
+ compatible = "rockchip,rk3588-otp";
+ reg = <0x0 0xfecc0000 0x0 0x400>;
+ clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>,
+ <&cru CLK_OTP_PHY_G>, <&cru CLK_OTPC_ARB>;
+ clock-names = "otp", "apb_pclk", "phy", "arb";
+ resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>,
+ <&cru SRST_OTPC_ARB>;
+ reset-names = "otp", "apb", "arb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpu_code: cpu-code@2 {
+ reg = <0x02 0x2>;
+ };
+
+ otp_id: id@7 {
+ reg = <0x07 0x10>;
+ };
+
+ cpub0_leakage: cpu-leakage@17 {
+ reg = <0x17 0x1>;
+ };
+
+ cpub1_leakage: cpu-leakage@18 {
+ reg = <0x18 0x1>;
+ };
+
+ cpul_leakage: cpu-leakage@19 {
+ reg = <0x19 0x1>;
+ };
+
+ log_leakage: log-leakage@1a {
+ reg = <0x1a 0x1>;
+ };
+
+ gpu_leakage: gpu-leakage@1b {
+ reg = <0x1b 0x1>;
+ };
+
+ otp_cpu_version: cpu-version@1c {
+ reg = <0x1c 0x1>;
+ bits = <3 3>;
+ };
+
+ npu_leakage: npu-leakage@28 {
+ reg = <0x28 0x1>;
+ };
+
+ codec_leakage: codec-leakage@29 {
+ reg = <0x29 0x1>;
+ };
+ };
+
+ dmac2: dma-controller@fed10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xfed10000 0x0 0x4000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH 0>;
+ arm,pl330-periph-burst;
+ clocks = <&cru ACLK_DMAC2>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
+ hdptxphy_hdmi0: phy@fed60000 {
+ compatible = "rockchip,rk3588-hdptx-phy";
+ reg = <0x0 0xfed60000 0x0 0x2000>;
+ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>;
+ clock-names = "ref", "apb";
+ #phy-cells = <0>;
+ resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>,
+ <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>,
+ <&cru SRST_HDPTX0_LANE>, <&cru SRST_HDPTX0_ROPLL>,
+ <&cru SRST_HDPTX0_LCPLL>;
+ reset-names = "phy", "apb", "init", "cmn", "lane", "ropll",
+ "lcpll";
+ rockchip,grf = <&hdptxphy0_grf>;
+ status = "disabled";
+ };
+
+ usbdp_phy0: phy@fed80000 {
+ compatible = "rockchip,rk3588-usbdp-phy";
+ reg = <0x0 0xfed80000 0x0 0x10000>;
+ #phy-cells = <1>;
+ clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
+ <&cru CLK_USBDP_PHY0_IMMORTAL>,
+ <&cru PCLK_USBDPPHY0>,
+ <&u2phy0>;
+ clock-names = "refclk", "immortal", "pclk", "utmi";
+ resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>,
+ <&cru SRST_USBDP_COMBO_PHY0_CMN>,
+ <&cru SRST_USBDP_COMBO_PHY0_LANE>,
+ <&cru SRST_USBDP_COMBO_PHY0_PCS>,
+ <&cru SRST_P_USBDPPHY0>;
+ reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+ rockchip,u2phy-grf = <&usb2phy0_grf>;
+ rockchip,usb-grf = <&usb_grf>;
+ rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
+ rockchip,vo-grf = <&vo0_grf>;
+ status = "disabled";
+ };
+
+ combphy0_ps: phy@fee00000 {
+ compatible = "rockchip,rk3588-naneng-combphy";
+ reg = <0x0 0xfee00000 0x0 0x100>;
+ clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>,
+ <&cru PCLK_PHP_ROOT>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&cru CLK_REF_PIPE_PHY0>;
+ assigned-clock-rates = <100000000>;
+ #phy-cells = <1>;
+ resets = <&cru SRST_REF_PIPE_PHY0>, <&cru SRST_P_PCIE2_PHY0>;
+ reset-names = "phy", "apb";
+ rockchip,pipe-grf = <&php_grf>;
+ rockchip,pipe-phy-grf = <&pipe_phy0_grf>;
+ status = "disabled";
+ };
+
+ combphy2_psu: phy@fee20000 {
+ compatible = "rockchip,rk3588-naneng-combphy";
+ reg = <0x0 0xfee20000 0x0 0x100>;
+ clocks = <&cru CLK_REF_PIPE_PHY2>, <&cru PCLK_PCIE_COMBO_PIPE_PHY2>,
+ <&cru PCLK_PHP_ROOT>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&cru CLK_REF_PIPE_PHY2>;
+ assigned-clock-rates = <100000000>;
+ #phy-cells = <1>;
+ resets = <&cru SRST_REF_PIPE_PHY2>, <&cru SRST_P_PCIE2_PHY2>;
+ reset-names = "phy", "apb";
+ rockchip,pipe-grf = <&php_grf>;
+ rockchip,pipe-phy-grf = <&pipe_phy2_grf>;
+ status = "disabled";
+ };
+
+ system_sram2: sram@ff001000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0xff001000 0x0 0xef000>;
+ ranges = <0x0 0x0 0xff001000 0xef000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3588-pinctrl";
+ ranges;
+ rockchip,grf = <&ioc>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ gpio0: gpio@fd8a0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfd8a0000 0x0 0x100>;
+ interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@fec20000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfec20000 0x0 0x100>;
+ interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@fec30000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfec30000 0x0 0x100>;
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@fec40000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfec40000 0x0 0x100>;
+ interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@fec50000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xfec50000 0x0 0x100>;
+ interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 128 32>;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ };
+ };
+};
+
+#include "rk3588-base-pinctrl.dtsi"
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-pinctrl.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-extra-pinctrl.dtsi
similarity index 100%
rename from dts/upstream/src/arm64/rockchip/rk3588-pinctrl.dtsi
rename to dts/upstream/src/arm64/rockchip/rk3588-extra-pinctrl.dtsi
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-extra.dtsi b/dts/upstream/src/arm64/rockchip/rk3588-extra.dtsi
new file mode 100644
index 0000000..3710176
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3588-extra.dtsi
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3588-base.dtsi"
+#include "rk3588-extra-pinctrl.dtsi"
+
+/ {
+ usb_host1_xhci: usb@fc400000 {
+ compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
+ reg = <0x0 0xfc400000 0x0 0x400000>;
+ interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>,
+ <&cru ACLK_USB3OTG1>;
+ clock-names = "ref_clk", "suspend_clk", "bus_clk";
+ dr_mode = "otg";
+ phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>;
+ phy-names = "usb2-phy", "usb3-phy";
+ phy_type = "utmi_wide";
+ power-domains = <&power RK3588_PD_USB>;
+ resets = <&cru SRST_A_USB3OTG1>;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ status = "disabled";
+ };
+
+ pcie30_phy_grf: syscon@fd5b8000 {
+ compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
+ reg = <0x0 0xfd5b8000 0x0 0x10000>;
+ };
+
+ pipe_phy1_grf: syscon@fd5c0000 {
+ compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
+ reg = <0x0 0xfd5c0000 0x0 0x100>;
+ };
+
+ usbdpphy1_grf: syscon@fd5cc000 {
+ compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
+ reg = <0x0 0xfd5cc000 0x0 0x4000>;
+ };
+
+ usb2phy1_grf: syscon@fd5d4000 {
+ compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xfd5d4000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy1: usb2phy@4000 {
+ compatible = "rockchip,rk3588-usb2phy";
+ reg = <0x4000 0x10>;
+ #clock-cells = <0>;
+ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "usb480m_phy1";
+ interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>;
+ resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>;
+ reset-names = "phy", "apb";
+ status = "disabled";
+
+ u2phy1_otg: otg-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
+ i2s8_8ch: i2s@fddc8000 {
+ compatible = "rockchip,rk3588-i2s-tdm";
+ reg = <0x0 0xfddc8000 0x0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>;
+ assigned-clock-parents = <&cru PLL_AUPLL>;
+ dmas = <&dmac2 22>;
+ dma-names = "tx";
+ power-domains = <&power RK3588_PD_VO0>;
+ resets = <&cru SRST_M_I2S8_8CH_TX>;
+ reset-names = "tx-m";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s6_8ch: i2s@fddf4000 {
+ compatible = "rockchip,rk3588-i2s-tdm";
+ reg = <0x0 0xfddf4000 0x0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>;
+ assigned-clock-parents = <&cru PLL_AUPLL>;
+ dmas = <&dmac2 4>;
+ dma-names = "tx";
+ power-domains = <&power RK3588_PD_VO1>;
+ resets = <&cru SRST_M_I2S6_8CH_TX>;
+ reset-names = "tx-m";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s7_8ch: i2s@fddf8000 {
+ compatible = "rockchip,rk3588-i2s-tdm";
+ reg = <0x0 0xfddf8000 0x0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>;
+ assigned-clock-parents = <&cru PLL_AUPLL>;
+ dmas = <&dmac2 21>;
+ dma-names = "rx";
+ power-domains = <&power RK3588_PD_VO1>;
+ resets = <&cru SRST_M_I2S7_8CH_RX>;
+ reset-names = "rx-m";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s10_8ch: i2s@fde00000 {
+ compatible = "rockchip,rk3588-i2s-tdm";
+ reg = <0x0 0xfde00000 0x0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>;
+ assigned-clock-parents = <&cru PLL_AUPLL>;
+ dmas = <&dmac2 24>;
+ dma-names = "rx";
+ power-domains = <&power RK3588_PD_VO1>;
+ resets = <&cru SRST_M_I2S10_8CH_RX>;
+ reset-names = "rx-m";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ pcie3x4: pcie@fe150000 {
+ compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0x0f>;
+ clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
+ <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
+ <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk",
+ "aux", "pipe";
+ device_type = "pci";
+ interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie3x4_intc 0>,
+ <0 0 0 2 &pcie3x4_intc 1>,
+ <0 0 0 3 &pcie3x4_intc 2>,
+ <0 0 0 4 &pcie3x4_intc 3>;
+ linux,pci-domain = <0>;
+ max-link-speed = <3>;
+ msi-map = <0x0000 &its1 0x0000 0x1000>;
+ num-lanes = <4>;
+ phys = <&pcie30phy>;
+ phy-names = "pcie-phy";
+ power-domains = <&power RK3588_PD_PCIE>;
+ ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
+ <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>,
+ <0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>;
+ reg = <0xa 0x40000000 0x0 0x00400000>,
+ <0x0 0xfe150000 0x0 0x00010000>,
+ <0x0 0xf0000000 0x0 0x00100000>;
+ reg-names = "dbi", "apb", "config";
+ resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
+ reset-names = "pwr", "pipe";
+ status = "disabled";
+
+ pcie3x4_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>;
+ };
+ };
+
+ pcie3x2: pcie@fe160000 {
+ compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x10 0x1f>;
+ clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
+ <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
+ <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk",
+ "aux", "pipe";
+ device_type = "pci";
+ interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
+ <0 0 0 2 &pcie3x2_intc 1>,
+ <0 0 0 3 &pcie3x2_intc 2>,
+ <0 0 0 4 &pcie3x2_intc 3>;
+ linux,pci-domain = <1>;
+ max-link-speed = <3>;
+ msi-map = <0x1000 &its1 0x1000 0x1000>;
+ num-lanes = <2>;
+ phys = <&pcie30phy>;
+ phy-names = "pcie-phy";
+ power-domains = <&power RK3588_PD_PCIE>;
+ ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>,
+ <0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>,
+ <0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>;
+ reg = <0xa 0x40400000 0x0 0x00400000>,
+ <0x0 0xfe160000 0x0 0x00010000>,
+ <0x0 0xf1000000 0x0 0x00100000>;
+ reg-names = "dbi", "apb", "config";
+ resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
+ reset-names = "pwr", "pipe";
+ status = "disabled";
+
+ pcie3x2_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>;
+ };
+ };
+
+ pcie2x1l0: pcie@fe170000 {
+ compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+ bus-range = <0x20 0x2f>;
+ clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>,
+ <&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>,
+ <&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk",
+ "aux", "pipe";
+ device_type = "pci";
+ interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>,
+ <0 0 0 2 &pcie2x1l0_intc 1>,
+ <0 0 0 3 &pcie2x1l0_intc 2>,
+ <0 0 0 4 &pcie2x1l0_intc 3>;
+ linux,pci-domain = <2>;
+ max-link-speed = <2>;
+ msi-map = <0x2000 &its0 0x2000 0x1000>;
+ num-lanes = <1>;
+ phys = <&combphy1_ps PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy";
+ power-domains = <&power RK3588_PD_PCIE>;
+ ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
+ <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>,
+ <0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>;
+ reg = <0xa 0x40800000 0x0 0x00400000>,
+ <0x0 0xfe170000 0x0 0x00010000>,
+ <0x0 0xf2000000 0x0 0x00100000>;
+ reg-names = "dbi", "apb", "config";
+ resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>;
+ reset-names = "pwr", "pipe";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
+ pcie2x1l0_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>;
+ };
+ };
+
+ gmac0: ethernet@fe1b0000 {
+ compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
+ reg = <0x0 0xfe1b0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
+ <&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>,
+ <&cru CLK_GMAC0_PTP_REF>;
+ clock-names = "stmmaceth", "clk_mac_ref",
+ "pclk_mac", "aclk_mac",
+ "ptp_ref";
+ power-domains = <&power RK3588_PD_GMAC>;
+ resets = <&cru SRST_A_GMAC0>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&sys_grf>;
+ rockchip,php-grf = <&php_grf>;
+ snps,axi-config = <&gmac0_stmmac_axi_setup>;
+ snps,mixed-burst;
+ snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+ snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+ snps,tso;
+ status = "disabled";
+
+ mdio0: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ };
+
+ gmac0_stmmac_axi_setup: stmmac-axi-config {
+ snps,blen = <0 0 0 0 16 8 4>;
+ snps,wr_osr_lmt = <4>;
+ snps,rd_osr_lmt = <8>;
+ };
+
+ gmac0_mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <2>;
+ queue0 {};
+ queue1 {};
+ };
+
+ gmac0_mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <2>;
+ queue0 {};
+ queue1 {};
+ };
+ };
+
+ sata1: sata@fe220000 {
+ compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+ reg = <0 0xfe220000 0 0x1000>;
+ interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
+ <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>,
+ <&cru CLK_PIPEPHY1_PIPE_ASIC_G>;
+ clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+ ports-implemented = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata-port@0 {
+ reg = <0>;
+ hba-port-cap = <HBA_PORT_FBSCP>;
+ phys = <&combphy1_ps PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ snps,rx-ts-max = <32>;
+ snps,tx-ts-max = <32>;
+ };
+ };
+
+ usbdp_phy1: phy@fed90000 {
+ compatible = "rockchip,rk3588-usbdp-phy";
+ reg = <0x0 0xfed90000 0x0 0x10000>;
+ #phy-cells = <1>;
+ clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
+ <&cru CLK_USBDP_PHY1_IMMORTAL>,
+ <&cru PCLK_USBDPPHY1>,
+ <&u2phy1>;
+ clock-names = "refclk", "immortal", "pclk", "utmi";
+ resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>,
+ <&cru SRST_USBDP_COMBO_PHY1_CMN>,
+ <&cru SRST_USBDP_COMBO_PHY1_LANE>,
+ <&cru SRST_USBDP_COMBO_PHY1_PCS>,
+ <&cru SRST_P_USBDPPHY1>;
+ reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+ rockchip,u2phy-grf = <&usb2phy1_grf>;
+ rockchip,usb-grf = <&usb_grf>;
+ rockchip,usbdpphy-grf = <&usbdpphy1_grf>;
+ rockchip,vo-grf = <&vo0_grf>;
+ status = "disabled";
+ };
+
+ combphy1_ps: phy@fee10000 {
+ compatible = "rockchip,rk3588-naneng-combphy";
+ reg = <0x0 0xfee10000 0x0 0x100>;
+ clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>,
+ <&cru PCLK_PHP_ROOT>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&cru CLK_REF_PIPE_PHY1>;
+ assigned-clock-rates = <100000000>;
+ #phy-cells = <1>;
+ resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>;
+ reset-names = "phy", "apb";
+ rockchip,pipe-grf = <&php_grf>;
+ rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
+ status = "disabled";
+ };
+
+ pcie30phy: phy@fee80000 {
+ compatible = "rockchip,rk3588-pcie3-phy";
+ reg = <0x0 0xfee80000 0x0 0x20000>;
+ #phy-cells = <0>;
+ clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>;
+ clock-names = "pclk";
+ resets = <&cru SRST_PCIE30_PHY>;
+ reset-names = "phy";
+ rockchip,pipe-grf = <&php_grf>;
+ rockchip,phy-grf = <&pcie30_phy_grf>;
+ status = "disabled";
+ };
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-friendlyelec-cm3588-nas.dts b/dts/upstream/src/arm64/rockchip/rk3588-friendlyelec-cm3588-nas.dts
new file mode 100644
index 0000000..83103e4
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3588-friendlyelec-cm3588-nas.dts
@@ -0,0 +1,778 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2023 Thomas McKahan
+ * Copyright (c) 2024 Sebastian Kropatsch
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588-friendlyelec-cm3588.dtsi"
+
+/ {
+ model = "FriendlyElec CM3588 NAS";
+ compatible = "friendlyarm,cm3588-nas", "friendlyarm,cm3588", "rockchip,rk3588";
+
+ adc_key_recovery: adc-key-recovery {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <17000>;
+ };
+ };
+
+ analog-sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&headphone_detect>;
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "realtek,rt5616-codec";
+
+ simple-audio-card,routing =
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "MIC1", "Microphone Jack",
+ "Microphone Jack", "micbias1";
+ simple-audio-card,widgets =
+ "Headphone", "Headphones",
+ "Microphone", "Microphone Jack";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0_8ch>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&rt5616>;
+ };
+ };
+
+ buzzer: pwm-beeper {
+ compatible = "pwm-beeper";
+ amp-supply = <&vcc_5v0_sys>;
+ beeper-hz = <500>;
+ pwms = <&pwm8 0 500000 0>;
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-levels = <0 50 80 120 160 220>;
+ fan-supply = <&vcc_5v0_sys>;
+ pwms = <&pwm1 0 50000 0>;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key1_pin>;
+
+ button-user {
+ debounce-interval = <50>;
+ gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
+ label = "User Button";
+ linux,code = <BTN_1>;
+ wakeup-source;
+ };
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc_12v_dcin: regulator-vcc-12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc_3v3_m2_a: regulator-vcc-3v3-m2-a {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_m2_a";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_12v_dcin>;
+ };
+
+ vcc_3v3_m2_b: regulator-vcc-3v3-m2-b {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_m2_b";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_12v_dcin>;
+ };
+
+ vcc_3v3_m2_c: regulator-vcc-3v3-m2-c {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_m2_c";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_12v_dcin>;
+ };
+
+ vcc_3v3_m2_d: regulator-vcc-3v3-m2-d {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3_m2_d";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_12v_dcin>;
+ };
+
+ /* vcc_5v0_sys powers the peripherals */
+ vcc_5v0_sys: regulator-vcc-5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_12v_dcin>;
+ };
+
+ /* SY6280AAC power switch (U14 in schematics) */
+ vcc_5v0_host_20: regulator-vcc-5v0-host-20 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc_5v0_host20_en>;
+ regulator-name = "vcc_5v0_host_20";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v0_sys>;
+ };
+
+ /* SY6280AAC power switch (U8 in schematics) */
+ vcc_5v0_host_30_p1: regulator-vcc-5v0-host-30-p1 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc_5v0_host30p1_en>;
+ regulator-name = "vcc_5v0_host_30_p1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v0_sys>;
+ };
+
+ /* SY6280AAC power switch (U9 in schematics) */
+ vcc_5v0_host_30_p2: regulator-vcc-5v0-host-30-p2 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc_5v0_host30p2_en>;
+ regulator-name = "vcc_5v0_host_30_p2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v0_sys>;
+ };
+
+ /* SY6280AAC power switch (U10 in schematics) */
+ vbus_5v0_typec: regulator-vbus-5v0-typec {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&typec_5v_pwr_en>;
+ regulator-name = "vbus_5v0_typec";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v0_sys>;
+ };
+};
+
+/* vcc_4v0_sys powers the RK806 and RK860's */
+&vcc_4v0_sys {
+ vin-supply = <&vcc_12v_dcin>;
+};
+
+/* Combo PHY 1 is configured to act as as PCIe 2.0 PHY */
+/* Used by PCIe controller 2 (pcie2x1l0) */
+&combphy1_ps {
+ status = "okay";
+};
+
+/* Combo PHY 2 is configured to act as USB3 PHY */
+/* Used by USB 3.0 OTG 2 controller (USB 3.0 Type-A port 2) */
+/* CM3588 USB Controller Config Table: USB30 HOST2 */
+&combphy2_psu {
+ status = "okay";
+};
+
+/* GPIO names are in the format "Human-readable-name [SIGNAL_LABEL]" */
+/* Signal labels match the official CM3588 NAS SDK schematic revision 2309 */
+&gpio0 {
+ gpio-line-names =
+ /* GPIO0 A0-A7 */
+ "", "", "", "",
+ "MicroSD detect [SDMMC_DET_L]", "", "", "",
+ /* GPIO0 B0-B7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO0 C0-C7 */
+ "", "", "", "",
+ "Pin 10 [UART0_RX_M0]", "Pin 08 [UART0_TX_M0/PWM4_M0]", "Pin 32 [PWM5_M1]", "",
+ /* GPIO0 D0-D7 */
+ "", "", "", "USB3 Type-C [CC_INT_L]",
+ "IR receiver [PWM3_IR_M0]", "User Button", "", "";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /* GPIO1 A0-A7 */
+ "Pin 27 [UART6_RX_M1]", "Pin 28 [UART6_TX_M1]", "", "",
+ "USB2 Type-A [USB2_PWREN]", "", "", "Pin 15",
+ /* GPIO1 B0-B7 */
+ "Pin 26", "Pin 21 [SPI0_MISO_M2]", "Pin 19 [SPI0_MOSI_M2/UART4_RX_M2]", "Pin 23 [SPI0_CLK_M2/UART4_TX_M2]",
+ "Pin 24 [SPI0_CS0_M2/UART7_RX_M2]", "Pin 22 [SPI0_CS1_M0/UART7_TX_M2]", "", "CSI-Pin 14 [MIPI_CAM2_CLKOUT]",
+ /* GPIO1 C0-C7 */
+ "", "", "", "",
+ "Headphone detect [HP_DET_L]", "", "", "",
+ /* GPIO1 D0-D7 */
+ "", "", "USB3 Type-C [TYPEC5V_PWREN_H]", "5V Fan [PWM1_M1]",
+ "", "HDMI-in detect [HDMIIRX_DET_L]", "Pin 05 [I2C8_SCL_M2]", "Pin 03 [I2C8_SDA_M2]";
+};
+
+&gpio2 {
+ gpio-line-names =
+ /* GPIO2 A0-A7 */
+ "", "", "", "",
+ "", "", "SPI NOR Flash [FSPI_D0_M1]", "SPI NOR Flash [FSPI_D1_M1]",
+ /* GPIO2 B0-B7 */
+ "SPI NOR Flash [FSPI_D2_M1]", "SPI NOR Flash [FSPI_D3_M1]", "", "SPI NOR Flash [FSPI_CLK_M1]",
+ "SPI NOR Flash [FSPI_CSN0_M1]", "", "", "",
+ /* GPIO2 C0-C7 */
+ "", "CSI-Pin 11 [MIPI_CAM2_RESET_L]", "CSI-Pin 12 [MIPI_CAM2_PDN_L]", "",
+ "", "", "", "",
+ /* GPIO2 D0-D7 */
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ /* GPIO3 A0-A7 */
+ "Pin 35 [SPI4_MISO_M1/PWM10_M0]", "Pin 38 [SPI4_MOSI_M1]", "Pin 40 [SPI4_CLK_M1/UART8_TX_M1]", "Pin 36 [SPI4_CS0_M1/UART8_RX_M1]",
+ "Pin 37 [SPI4_CS1_M1]", "USB3-A #2 [USB3_2_PWREN]", "DSI-Pin 12 [LCD_RST]", "Buzzer [PWM8_M0]",
+ /* GPIO3 B0-B7 */
+ "Pin 33 [PWM9_M0]", "DSI-Pin 10 [PWM2_M1/LCD_BL]", "Pin 07", "Pin 16",
+ "Pin 18", "Pin 29 [UART3_TX_M1/PWM12_M0]", "Pin 31 [UART3_RX_M1/PWM13_M0]", "Pin 12",
+ /* GPIO3 C0-C7 */
+ "DSI-Pin 08 [TP_INT_L]", "DSI-Pin 14 [TP_RST_L]", "Pin 11 [PWM14_M0]", "Pin 13 [PWM15_IR_M0]",
+ "", "", "", "DSI-Pin 06 [I2C5_SCL_M0_TP]",
+ /* GPIO3 D0-D7 */
+ "DSI-Pin 05 [I2C5_SDA_M0_TP]", "", "", "",
+ "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ /* GPIO4 A0-A7 */
+ "", "", "M.2 M-Key Slot4 [M2_D_PERST_L]", "",
+ "", "", "", "",
+ /* GPIO4 B0-B7 */
+ "USB3-A #1 [USB3_TYPEC1_PWREN]", "", "", "M.2 M-Key Slot3 [M2_C_PERST_L]",
+ "M.2 M-Key Slot2 [M2_B_PERST_L]", "M.2 M-Key Slot1 [M2_A_CLKREQ_L]", "M.2 M-Key Slot1 [M2_A_PERST_L]", "",
+ /* GPIO4 C0-C7 */
+ "", "", "", "",
+ "", "", "", "",
+ /* GPIO4 D0-D7 */
+ "", "", "", "",
+ "", "", "", "";
+};
+
+/* Connected to MIPI-DSI0 */
+&i2c5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5m0_xfer>;
+ status = "disabled";
+};
+
+&i2c6 {
+ fusb302: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_int>;
+ vbus-supply = <&vbus_5v0_typec>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ power-role = "source";
+ source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "source";
+ vbus-supply = <&vbus_5v0_typec>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usbc0_orien_sw: endpoint {
+ remote-endpoint = <&usbdp_phy0_orientation_switch>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usbc0_role_sw: endpoint {
+ remote-endpoint = <&dwc3_0_role_switch>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ dp_altmode_mux: endpoint {
+ remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+ };
+ };
+ };
+ };
+ };
+};
+
+/* Connected to MIPI-CSI1 */
+/* &i2c7 */
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+&i2c8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c8m2_xfer>;
+ status = "okay";
+};
+
+&pcie2x1l0 {
+ /* 2. M.2 socket, CON14: pcie30phy port0 lane1, @fe170000 */
+ max-link-speed = <3>;
+ num-lanes = <1>;
+ phys = <&pcie30phy>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_0_rst>;
+ reset-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc_3v3_m2_b>;
+ status = "okay";
+};
+
+&pcie2x1l1 {
+ /* 4. M.2 socket, CON16: pcie30phy port1 lane1, @fe180000 */
+ max-link-speed = <3>;
+ num-lanes = <1>;
+ phys = <&pcie30phy>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_1_rst>;
+ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc_3v3_m2_d>;
+ status = "okay";
+};
+
+&pcie30phy {
+ /*
+ * Data lane mapping <1 3 2 4> = x1x1 x1x1 (bifurcation of both ports)
+ * port 0 lane 0 - always mapped to controller 0 (4L)
+ * port 0 lane 1 - map to controller 2 (1L0)
+ * port 1 lane 0 - map to controller 1 (2L)
+ * port 1 lane 1 - map to controller 3 (1L1)
+ */
+ data-lanes = <1 3 2 4>;
+ status = "okay";
+};
+
+&pcie3x4 {
+ /* 1. M.2 socket, CON13: pcie30phy port0 lane0, @fe150000 */
+ max-link-speed = <3>;
+ num-lanes = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3x4_rst>;
+ reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc_3v3_m2_a>;
+ status = "okay";
+};
+
+&pcie3x2 {
+ /* 3. M.2 socket, CON15: pcie30phy port1 lane0, @fe160000 */
+ max-link-speed = <3>;
+ num-lanes = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3x2_rst>;
+ reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc_3v3_m2_c>;
+ status = "okay";
+};
+
+&pinctrl {
+ audio {
+ headphone_detect: headphone-detect {
+ rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ gpio-key {
+ key1_pin: key1-pin {
+ rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pcie {
+ pcie2_0_rst: pcie2-0-rst {
+ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie2_1_rst: pcie2-1-rst {
+ rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie3x2_rst: pcie3x2-rst {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie3x4_rst: pcie3x4-rst {
+ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ vcc_5v0_host20_en: vcc-5v0-host20-en {
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc_5v0_host30p1_en: vcc-5v0-host30p1-en {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc_5v0_host30p2_en: vcc-5v0-host30p2-en {
+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ usbc0_int: usbc0-int {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ typec_5v_pwr_en: typec-5v-pwr-en {
+ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+/* Connected to 5V Fan */
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1m1_pins>;
+ status = "okay";
+};
+
+/* Connected to MIPI-DSI0 */
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2m1_pins>;
+};
+
+/* Connected to IR Receiver */
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3m0_pins>;
+ status = "okay";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+/* Shared with UART0 */
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4m1_pins>;
+ status = "disabled";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+&pwm5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm5m1_pins>;
+ status = "okay";
+};
+
+/* Connected to Buzzer */
+&pwm8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm8m0_pins>;
+ status = "okay";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+&pwm9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm9m0_pins>;
+ status = "okay";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+/* Shared with SPI4 */
+&pwm10 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm10m0_pins>;
+ status = "disabled";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+/* Shared with UART3 */
+&pwm12 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm12m0_pins>;
+ status = "disabled";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+/* Shared with UART3 */
+&pwm13 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm13m0_pins>;
+ status = "disabled";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+&pwm14 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm14m0_pins>;
+ status = "okay";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+/* Optimized for infrared applications */
+&pwm15 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm15m0_pins>;
+ status = "disabled";
+};
+
+/* microSD card */
+&sdmmc {
+ status = "okay";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+/* Shared with UART4, UART7 and PWM10 */
+&spi0 {
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0m2_cs0 &spi0m2_pins>;
+ status = "disabled";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+/* Shared with UART8 */
+&spi4 {
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi4m1_cs0 &spi4m1_pins>;
+ status = "disabled";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+/* Shared with PWM4 */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0m0_xfer>;
+ status = "disabled";
+};
+
+/* Debug UART */
+&uart2 {
+ status = "okay";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+/* Shared with PWM12 and PWM13 */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3m1_xfer>;
+ status = "disabled";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+/* Shared with SPI0 */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4m2_xfer>;
+ status = "disabled";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6m1_xfer>;
+ status = "okay";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+/* Shared with SPI0 */
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7m2_xfer>;
+ status = "disabled";
+};
+
+/* GPIO Connector, connected to 40-pin GPIO header */
+/* Shared with SPI4 */
+&uart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart8m1_xfer>;
+ status = "disabled";
+};
+
+/* USB2 PHY for USB Type-C port */
+/* CM3588 USB Controller Config Table: USB20 OTG0 */
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ phy-supply = <&vbus_5v0_typec>;
+ status = "okay";
+};
+
+/* USB2 PHY for USB 3.0 Type-A port 1 */
+/* CM3588 USB Controller Config Table: USB20 OTG1 */
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ phy-supply = <&vcc_5v0_host_30_p1>;
+ status = "okay";
+};
+
+/* USB2 PHY for USB 2.0 Type-A */
+/* CM3588 USB Controller Config Table: USB20 HOST0 */
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc_5v0_host_20>;
+ status = "okay";
+};
+
+/* USB2 PHY for USB 3.0 Type-A port 2 */
+/* CM3588 USB Controller Config Table: USB20 HOST1 */
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc_5v0_host_30_p2>;
+ status = "okay";
+};
+
+/* USB 2.0 Type-A */
+/* PHY: <&u2phy2_host> */
+&usb_host0_ehci {
+ status = "okay";
+};
+
+/* USB 2.0 Type-A */
+/* PHY: <&u2phy2_host> */
+&usb_host0_ohci {
+ status = "okay";
+};
+
+/* USB Type-C */
+/* PHYs: <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3> */
+&usb_host0_xhci {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ dwc3_0_role_switch: endpoint {
+ remote-endpoint = <&usbc0_role_sw>;
+ };
+ };
+};
+
+/* Lower USB 3.0 Type-A (port 2) */
+/* PHY: <&u2phy3_host> */
+&usb_host1_ehci {
+ status = "okay";
+};
+
+/* Lower USB 3.0 Type-A (port 2) */
+/* PHY: <&u2phy3_host> */
+&usb_host1_ohci {
+ status = "okay";
+};
+
+/* Upper USB 3.0 Type-A (port 1) */
+/* PHYs: <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3> */
+&usb_host1_xhci {
+ dr_mode = "host";
+ status = "okay";
+};
+
+/* Lower USB 3.0 Type-A (port 2) */
+/* PHYs: <&combphy2_psu PHY_TYPE_USB3> */
+&usb_host2_xhci {
+ status = "okay";
+};
+
+/* USB3 PHY for USB Type-C port */
+/* CM3588 USB Controller Config Table: USB30 OTG0 */
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_orientation_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_orien_sw>;
+ };
+
+ usbdp_phy0_dp_altmode_mux: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dp_altmode_mux>;
+ };
+ };
+};
+
+/* USB3 PHY for USB 3.0 Type-A port 1 */
+/* CM3588 USB Controller Config Table: USB30 OTG1 */
+&usbdp_phy1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/rk3588-toybrick-x0.dts b/dts/upstream/src/arm64/rockchip/rk3588-friendlyelec-cm3588.dtsi
similarity index 65%
rename from arch/arm/dts/rk3588-toybrick-x0.dts
rename to dts/upstream/src/arm64/rockchip/rk3588-friendlyelec-cm3588.dtsi
index 9090c5c..e3a9598 100644
--- a/arch/arm/dts/rk3588-toybrick-x0.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3588-friendlyelec-cm3588.dtsi
@@ -1,176 +1,115 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2023 Thomas McKahan
+ * Copyright (c) 2024 Sebastian Kropatsch
*
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3588.dtsi"
/ {
- model = "Rockchip Toybrick TB-RK3588X Board";
- compatible = "rockchip,rk3588-toybrick-x0", "rockchip,rk3588";
+ model = "FriendlyElec CM3588";
+ compatible = "friendlyarm,cm3588", "rockchip,rk3588";
aliases {
mmc0 = &sdhci;
+ mmc1 = &sdmmc;
};
chosen {
stdout-path = "serial2:1500000n8";
};
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 1>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
- poll-interval = <100>;
+ leds {
+ compatible = "gpio-leds";
- button-vol-up {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- press-threshold-microvolt = <17000>;
+ led_sys: led-0 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_sys_pin>;
};
- button-vol-down {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- press-threshold-microvolt = <417000>;
- };
-
- button-menu {
- label = "Menu";
- linux,code = <KEY_MENU>;
- press-threshold-microvolt = <890000>;
- };
-
- button-escape {
- label = "Escape";
- linux,code = <KEY_ESC>;
- press-threshold-microvolt = <1235000>;
+ led_usr: led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_usr_pin>;
};
};
- backlight: backlight {
- compatible = "pwm-backlight";
- power-supply = <&vcc12v_dcin>;
- pwms = <&pwm2 0 25000 0>;
- };
-
- pcie20_avdd0v85: pcie20-avdd0v85-regulator {
+ /* vcc_4v0_sys powers the RK806 and RK860's */
+ vcc_4v0_sys: regulator-vcc-4v0-sys {
compatible = "regulator-fixed";
- regulator-name = "pcie20_avdd0v85";
+ regulator-name = "vcc_4v0_sys";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <850000>;
- vin-supply = <&vdd_0v85_s0>;
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <4000000>;
};
- pcie20_avdd1v8: pcie20-avdd1v8-regulator {
+ vcc_3v3_pcie20: regulator-vcc-3v3-pcie20 {
compatible = "regulator-fixed";
- regulator-name = "pcie20_avdd1v8";
+ regulator-name = "vcc_3v3_pcie20";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&avcc_1v8_s0>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_s3>;
};
- pcie30_avdd0v75: pcie30-avdd0v75-regulator {
+ vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
compatible = "regulator-fixed";
- regulator-name = "pcie30_avdd0v75";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <750000>;
- vin-supply = <&avdd_0v75_s0>;
- };
-
- pcie30_avdd1v8: pcie30-avdd1v8-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pcie30_avdd1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&avcc_1v8_s0>;
- };
-
- vcc12v_dcin: vcc12v-dcin-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc12v_dcin";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host";
+ pinctrl-0 = <&sd_s0_pwr>;
regulator-boot-on;
- regulator-always-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v0_usb>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_sd_s0";
+ vin-supply = <&vcc_3v3_s3>;
};
- vcc5v0_sys: vcc5v0-sys-regulator {
+ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
+ regulator-name = "vcc-1v1-nldo-s3";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_usbdcin";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vcc5v0_usb: vcc5v0-usb-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_usb";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v0_usbdcin>;
- };
-
- vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_1v1_nldo_s3";
- regulator-always-on;
- regulator-boot-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
- vin-supply = <&vcc5v0_sys>;
+ vin-supply = <&vcc_4v0_sys>;
};
};
+/* Combo PHY 0 is configured to act as as PCIe 2.0 PHY */
+/* Used by PCIe controller 4 (pcie2x1l2) */
&combphy0_ps {
status = "okay";
};
-&combphy2_psu {
- status = "okay";
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_b0 {
@@ -189,34 +128,9 @@
cpu-supply = <&vdd_cpu_big1_s0>;
};
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_lit_s0>;
-};
-
-&gmac0 {
- clock_in_out = "output";
- phy-handle = <&rgmii_phy>;
- phy-mode = "rgmii-rxid";
- pinctrl-0 = <&gmac0_miim
- &gmac0_tx_bus2
- &gmac0_rx_bus2
- &gmac0_rgmii_clk
- &gmac0_rgmii_bus>;
- pinctrl-names = "default";
- rx_delay = <0x00>;
- tx_delay = <0x43>;
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ sram-supply = <&vdd_gpu_mem_s0>;
status = "okay";
};
@@ -235,7 +149,7 @@
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
+ vin-supply = <&vcc_4v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -252,7 +166,7 @@
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
- vin-supply = <&vcc5v0_sys>;
+ vin-supply = <&vcc_4v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -263,72 +177,146 @@
&i2c2 {
status = "okay";
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc_4v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c6 {
+ clock-frequency = <200000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6m0_xfer>;
+ status = "okay";
+
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-output-names = "hym8563";
interrupt-parent = <&gpio0>;
- interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
wakeup-source;
};
};
-&mdio0 {
- rgmii_phy: ethernet-phy@1 {
- /* RTL8211F */
- compatible = "ethernet-phy-id001c.c916";
- reg = <0x1>;
- pinctrl-names = "default";
- pinctrl-0 = <&rtl8211f_rst>;
- reset-assert-us = <20000>;
- reset-deassert-us = <100000>;
- reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+&i2c7 {
+ clock-frequency = <200000>;
+ status = "okay";
+
+ rt5616: audio-codec@1b {
+ compatible = "realtek,rt5616";
+ reg = <0x1b>;
+ #sound-dai-cells = <0>;
};
};
+&i2s0_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+};
+
+&i2s5_8ch {
+ status = "okay";
+};
+
+&i2s6_8ch {
+ status = "okay";
+};
+
+&i2s7_8ch {
+ status = "okay";
+};
+
+&pcie2x1l2 {
+ /* r8125 ethernet, @fe190000 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2_2_rst>;
+ reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc_3v3_pcie20>;
+ status = "okay";
+};
+
&pinctrl {
- rtl8211f {
- rtl8211f_rst: rtl8211f-rst {
- rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ gpio-leds {
+ led_sys_pin: led-sys-pin {
+ rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ led_usr_pin: led-usr-pin {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
hym8563 {
- hym8563_int: hym8563-int {
- rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ hym8563_int: rtc-int {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
- usb {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ pcie {
+ pcie2_2_rst: pcie2-2-rst {
+ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
-};
-&pwm2 {
- status = "okay";
+ sdmmc {
+ sd_s0_pwr: sd-s0-pwr {
+ rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
};
&saradc {
- vref-supply = <&vcc_1v8_s0>;
+ vref-supply = <&avcc_1v8_s0>;
status = "okay";
};
+/* eMMC */
&sdhci {
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
- no-sdio;
no-sd;
+ no-sdio;
non-removable;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vcc_1v8_s3>;
status = "okay";
};
+/* microSD card */
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ no-mmc;
+ no-sdio;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_sd_s0>;
+ vqmmc-supply = <&vccio_sd_s0>;
+};
+
&spi2 {
assigned-clocks = <&cru CLK_SPI2>;
assigned-clock-rates = <200000000>;
@@ -337,34 +325,38 @@
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
status = "okay";
- pmic@0 {
+ rk806_single: pmic@0 {
compatible = "rockchip,rk806";
reg = <0x0>;
- gpio-controller;
- #gpio-cells = <2>;
+
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
spi-max-frequency = <1000000>;
system-power-controller;
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc5-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc5v0_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
+ vcc1-supply = <&vcc_4v0_sys>;
+ vcc2-supply = <&vcc_4v0_sys>;
+ vcc3-supply = <&vcc_4v0_sys>;
+ vcc4-supply = <&vcc_4v0_sys>;
+ vcc5-supply = <&vcc_4v0_sys>;
+ vcc6-supply = <&vcc_4v0_sys>;
+ vcc7-supply = <&vcc_4v0_sys>;
+ vcc8-supply = <&vcc_4v0_sys>;
+ vcc9-supply = <&vcc_4v0_sys>;
+ vcc10-supply = <&vcc_4v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
- vcc12-supply = <&vcc5v0_sys>;
+ vcc12-supply = <&vcc_4v0_sys>;
vcc13-supply = <&vcc_1v1_nldo_s3>;
vcc14-supply = <&vcc_1v1_nldo_s3>;
- vcca-supply = <&vcc5v0_sys>;
+ vcca-supply = <&vcc_4v0_sys>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl1";
@@ -383,12 +375,12 @@
regulators {
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
- regulator-name = "vdd_gpu_s0";
regulator-boot-on;
- regulator-enable-ramp-delay = <400>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-enable-ramp-delay = <400>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -396,12 +388,12 @@
};
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
- regulator-name = "vdd_cpu_lit_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_lit_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -409,12 +401,12 @@
};
vdd_log_s0: dcdc-reg3 {
- regulator-name = "vdd_log_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <750000>;
regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_log_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -423,13 +415,12 @@
};
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
- regulator-name = "vdd_vdenc_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
- regulator-init-microvolt = <750000>;
regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_vdenc_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -437,12 +428,12 @@
};
vdd_ddr_s0: dcdc-reg5 {
- regulator-name = "vdd_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <900000>;
regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_ddr_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -451,9 +442,9 @@
};
vdd2_ddr_s3: dcdc-reg6 {
- regulator-name = "vdd2_ddr_s3";
regulator-always-on;
regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
regulator-state-mem {
regulator-on-in-suspend;
@@ -461,11 +452,12 @@
};
vcc_2v0_pldo_s3: dcdc-reg7 {
- regulator-name = "vdd_2v0_pldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_2v0_pldo_s3";
regulator-state-mem {
regulator-on-in-suspend;
@@ -474,11 +466,11 @@
};
vcc_3v3_s3: dcdc-reg8 {
- regulator-name = "vcc_3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
regulator-state-mem {
regulator-on-in-suspend;
@@ -487,9 +479,9 @@
};
vddq_ddr_s0: dcdc-reg9 {
- regulator-name = "vddq_ddr_s0";
regulator-always-on;
regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -497,11 +489,11 @@
};
vcc_1v8_s3: dcdc-reg10 {
- regulator-name = "vcc_1v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
regulator-state-mem {
regulator-on-in-suspend;
@@ -510,11 +502,11 @@
};
avcc_1v8_s0: pldo-reg1 {
- regulator-name = "avcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-name = "avcc_1v8_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -522,11 +514,11 @@
};
vcc_1v8_s0: pldo-reg2 {
- regulator-name = "vcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -535,11 +527,11 @@
};
avdd_1v2_s0: pldo-reg3 {
- regulator-name = "avdd_1v2_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
+ regulator-name = "avdd_1v2_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -547,11 +539,12 @@
};
vcc_3v3_s0: pldo-reg4 {
- regulator-name = "vcc_3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_3v3_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -559,11 +552,12 @@
};
vccio_sd_s0: pldo-reg5 {
- regulator-name = "vccio_sd_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vccio_sd_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -571,11 +565,11 @@
};
pldo6_s3: pldo-reg6 {
- regulator-name = "pldo6_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-name = "pldo6_s3";
regulator-state-mem {
regulator-on-in-suspend;
@@ -584,11 +578,11 @@
};
vdd_0v75_s3: nldo-reg1 {
- regulator-name = "vdd_0v75_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
regulator-state-mem {
regulator-on-in-suspend;
@@ -597,11 +591,11 @@
};
vdd_ddr_pll_s0: nldo-reg2 {
- regulator-name = "vdd_ddr_pll_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_ddr_pll_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -610,11 +604,11 @@
};
avdd_0v75_s0: nldo-reg3 {
- regulator-name = "avdd_0v75_s0";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <837500>;
- regulator-max-microvolt = <837500>;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "avdd_0v75_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -622,11 +616,11 @@
};
vdd_0v85_s0: nldo-reg4 {
- regulator-name = "vdd_0v85_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_0v85_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -634,11 +628,11 @@
};
vdd_0v75_s0: nldo-reg5 {
- regulator-name = "vdd_0v75_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s0";
regulator-state-mem {
regulator-off-in-suspend;
@@ -648,41 +642,12 @@
};
};
-&u2phy2 {
- status = "okay";
-};
-
-&u2phy2_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&u2phy3 {
- status = "okay";
-};
-
-&u2phy3_host {
- phy-supply = <&vcc5v0_host>;
+&tsadc {
status = "okay";
};
+/* Debug UART */
&uart2 {
+ pinctrl-names = "default";
pinctrl-0 = <&uart2m0_xfer>;
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588-rock-5-itx.dts b/dts/upstream/src/arm64/rockchip/rk3588-rock-5-itx.dts
new file mode 100644
index 0000000..d0b922b
--- /dev/null
+++ b/dts/upstream/src/arm64/rockchip/rk3588-rock-5-itx.dts
@@ -0,0 +1,1177 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Radxa Limited
+ * Copyright (c) 2024 Heiko Stuebner <heiko@sntech.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "dt-bindings/usb/pd.h"
+#include "rk3588.dtsi"
+
+/ {
+ model = "Radxa ROCK 5 ITX";
+ compatible = "radxa,rock-5-itx", "rockchip,rk3588";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc_keys: adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-maskrom {
+ label = "Mask Rom";
+ linux,code = <KEY_SETUP>;
+ press-threshold-microvolt = <1750>;
+ };
+ };
+
+ analog-sound {
+ compatible = "audio-graph-card";
+ label = "rk3588-es8316";
+ dais = <&i2s0_8ch_p0>;
+ hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ routing = "MIC2", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR";
+ widgets = "Microphone", "Mic Jack",
+ "Headphone", "Headphones";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ power-led1 {
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ hdd-led2 {
+ gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
+ };
+ };
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-levels = <0 64 128 192 255>;
+ fan-supply = <&vcc12v_dcin>;
+ pwms = <&pwm14 0 10000 0>;
+ };
+
+ /* M.2 E-KEY */
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&hym8563>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+ };
+
+ typec_vin: regulator-typec-vin {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vbus5v0_typec_en>;
+ regulator-name = "typec_vin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc12v_dcin: regulator-vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc33_io64: regulator-vcc33-io64 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc33_io64";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_ekey: regulator-vcc3v3-ekey {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ekey_en>;
+ regulator-name = "vcc3v3_ekey";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <50000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_lan: vcc3v3_lan_phy2: regulator-vcc3v3-lan {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_lan";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc3v3_mkey: regulator-vcc3v3-mkey {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie30x4_pwren_h>;
+ regulator-name = "vcc3v3_mkey";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_sys: regulator-vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usb20: vcc5v0_usb12: vcc5v0_usb34: regulator-vcc5v0-usb {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_host_pwren_h>;
+ regulator-name = "vcc5v0_usb";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v1_nldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy1_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1m2_xfer>;
+ status = "okay";
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+/* CAM0 connector */
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3m0_xfer>;
+};
+
+/* M.2 E-key */
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4m1_xfer>;
+};
+
+/* RTC and LCD0 connector */
+&i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6m0_xfer>;
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-output-names = "wifi_32kout";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_int>;
+ };
+};
+
+/* Audio codec and CAM1 connector */
+&i2c7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7m0_xfer>;
+ status = "okay";
+
+ es8316: audio-codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+
+ port {
+ es8316_p0_0: endpoint {
+ remote-endpoint = <&i2s0_8ch_p0_0>;
+ };
+ };
+ };
+};
+
+/* FUSB302 and LCD1 connector */
+&i2c8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c8m4_xfer>;
+ status = "okay";
+
+ usbc0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_int>;
+ vbus-supply = <&typec_vin>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ power-role = "source";
+ source-pdos =
+ <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usbc0_orien_sw: endpoint {
+ remote-endpoint = <&usbdp_phy0_orientation_switch>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usbc0_role_sw: endpoint {
+ remote-endpoint = <&dwc3_0_role_switch>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ dp_altmode_mux: endpoint {
+ remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c8m4_xfer {
+ rockchip,pins =
+ /* i2c8_scl_m4 */
+ <3 RK_PC2 9 &pcfg_pull_up_drv_level_6>,
+ /* i2c8_sda_m4 */
+ <3 RK_PC3 9 &pcfg_pull_up_drv_level_6>;
+};
+
+&i2s0_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+
+ i2s0_8ch_p0: port {
+ i2s0_8ch_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&es8316_p0_0>;
+ };
+ };
+};
+
+&package_thermal {
+ polling-delay = <1000>;
+
+ trips {
+ package_fan0: package-fan0 {
+ hysteresis = <2000>;
+ temperature = <50000>;
+ type = "active";
+ };
+
+ package_fan1: package-fan1 {
+ hysteresis = <2000>;
+ temperature = <65000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ cooling-device = <&fan0 THERMAL_NO_LIMIT 1>;
+ trip = <&package_fan0>;
+ };
+ map1 {
+ cooling-device = <&fan0 2 THERMAL_NO_LIMIT>;
+ trip = <&package_fan1>;
+ };
+ };
+};
+
+/* M.2 E-key */
+&pcie2x1l0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie30x1_0_perstn_m1_l>;
+ reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_ekey>;
+ status = "okay";
+};
+
+/* RTL8125B_1 */
+&pcie2x1l1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie30x1_1_perstn>;
+ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_lan>;
+ status = "okay";
+};
+
+/* RTL8125B_2 */
+&pcie2x1l2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie20x1_2_perstn>;
+ reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_lan_phy2>;
+ status = "okay";
+};
+
+&pcie30phy {
+ data-lanes = <1 1 2 2>;
+ /* separate clock lines from the clock generator to phy and devices */
+ rockchip,rx-common-refclk-mode = <0 0 0 0>;
+ status = "okay";
+};
+
+/* ASMedia ASM1164 Sata controller */
+&pcie3x2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie30x2_perstn_m1_l>;
+ reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc33_io64>;
+ status = "okay";
+};
+
+/* M.2 M.key */
+&pcie3x4 {
+ num-lanes = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie30x4_perstn_m1_l>;
+ reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_mkey>;
+ status = "okay";
+};
+
+&pinctrl {
+ hym8563 {
+ rtc_int: rtc-int {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ led_pins: led-pins {
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
+ <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie20x1_2_perstn: pcie20x1-2-perstn {
+ rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie30x1_0_perstn_m1_l: pcie30x1-0-perstn-m1-l {
+ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie30x1_1_perstn: pcie30x1-1-perstn {
+ rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie30x2_perstn_m1_l: pcie30x2-perstn-m1-l {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie30x4_perstn_m1_l: pcie30x4-perstn-m1-l {
+ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ ekey_en: ekey-en {
+ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ pcie30x4_pwren_h: pcie30x4-pwren-h {
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sound {
+ hp_detect: hp-detect {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ usb {
+ usb_host_pwren_h: usb-host-pwren-h {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_otg_en: vcc5v0-otg-en {
+ rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ gl3523_reset: rl3523-reset {
+ rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ usbc0_int: usbc0-int {
+ rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vbus5v0_typec_en: vbus5v0-typec-en {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ hdmirx {
+ hdmirx_det: hdmirx-det {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wireless-wlan {
+ wifi_host_wake_irq: wifi-host-wake-irq {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ dp {
+ dp1_hpd: dp1-hpd {
+ rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm14 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm14m1_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&avcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ mmc-hs200-1_8v;
+ no-sdio;
+ no-sd;
+ non-removable;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <200000000>;
+ no-sdio;
+ no-mmc;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+/* M.2 E-KEY */
+&sdio {
+ broken-cd;
+ bus-width = <4>;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <150000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-sd;
+ no-mmc;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdiom0_pins>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_ekey>;
+ status = "okay";
+};
+
+&sfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&fspim2_pins>;
+ status = "okay";
+
+ spi_flash: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&spi2 {
+ status = "okay";
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ spi-max-frequency = <1000000>;
+ system-power-controller;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl1";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_lit_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_log_s0";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_vdenc_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_2v0_pldo_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "avcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "avdd_1v2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_3v3_s0";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vccio_sd_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "pldo6_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_ddr_pll_s0";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "avdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_0v85_s0";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <837500>;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+/* Connected to M.2 E-key */
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ /* connected to USB3 hub, which is powered by vcc5v0_usb12 */
+ phy-supply = <&vcc5v0_usb12>;
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ /* connected to USB2 hub, which is powered by vcc5v0_usb20 */
+ phy-supply = <&vcc5v0_usb20>;
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc5v0_usb20>;
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dwc3_0_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_role_sw>;
+ };
+ };
+};
+
+&usb_host1_xhci {
+ dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ /* 2.0 hub on port 1 */
+ hub_2_0: hub@1 {
+ compatible = "usb5e3,610";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ vdd-supply = <&vcc_3v3_s3>;
+ };
+
+ /* 3.0 hub on port 4 */
+ hub_3_0: hub@2 {
+ compatible = "usb5e3,620";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gl3523_reset>;
+ reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc_3v3_s3>;
+ };
+};
+
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ sbu1-dc-gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ usbdp_phy0_orientation_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_orien_sw>;
+ };
+
+ usbdp_phy0_dp_altmode_mux: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dp_altmode_mux>;
+ };
+ };
+};
+
+&usbdp_phy1 {
+ rockchip,dp-lane-mux = <2 3>;
+ status = "okay";
+};
diff --git a/dts/upstream/src/arm64/rockchip/rk3588.dtsi b/dts/upstream/src/arm64/rockchip/rk3588.dtsi
index 5984016..0bbeee3 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588.dtsi
@@ -1,413 +1,7 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ *
*/
-#include "rk3588s.dtsi"
-#include "rk3588-pinctrl.dtsi"
-
-/ {
- usb_host1_xhci: usb@fc400000 {
- compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
- reg = <0x0 0xfc400000 0x0 0x400000>;
- interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>,
- <&cru ACLK_USB3OTG1>;
- clock-names = "ref_clk", "suspend_clk", "bus_clk";
- dr_mode = "otg";
- phys = <&u2phy1_otg>, <&usbdp_phy1 PHY_TYPE_USB3>;
- phy-names = "usb2-phy", "usb3-phy";
- phy_type = "utmi_wide";
- power-domains = <&power RK3588_PD_USB>;
- resets = <&cru SRST_A_USB3OTG1>;
- snps,dis_enblslpm_quirk;
- snps,dis-u2-freeclk-exists-quirk;
- snps,dis-del-phy-power-chg-quirk;
- snps,dis-tx-ipgap-linecheck-quirk;
- status = "disabled";
- };
-
- pcie30_phy_grf: syscon@fd5b8000 {
- compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
- reg = <0x0 0xfd5b8000 0x0 0x10000>;
- };
-
- pipe_phy1_grf: syscon@fd5c0000 {
- compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
- reg = <0x0 0xfd5c0000 0x0 0x100>;
- };
-
- usbdpphy1_grf: syscon@fd5cc000 {
- compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
- reg = <0x0 0xfd5cc000 0x0 0x4000>;
- };
-
- usb2phy1_grf: syscon@fd5d4000 {
- compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
- reg = <0x0 0xfd5d4000 0x0 0x4000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- u2phy1: usb2phy@4000 {
- compatible = "rockchip,rk3588-usb2phy";
- reg = <0x4000 0x10>;
- #clock-cells = <0>;
- clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
- clock-names = "phyclk";
- clock-output-names = "usb480m_phy1";
- interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>;
- resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>;
- reset-names = "phy", "apb";
- status = "disabled";
-
- u2phy1_otg: otg-port {
- #phy-cells = <0>;
- status = "disabled";
- };
- };
- };
-
- i2s8_8ch: i2s@fddc8000 {
- compatible = "rockchip,rk3588-i2s-tdm";
- reg = <0x0 0xfddc8000 0x0 0x1000>;
- interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>;
- clock-names = "mclk_tx", "mclk_rx", "hclk";
- assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>;
- assigned-clock-parents = <&cru PLL_AUPLL>;
- dmas = <&dmac2 22>;
- dma-names = "tx";
- power-domains = <&power RK3588_PD_VO0>;
- resets = <&cru SRST_M_I2S8_8CH_TX>;
- reset-names = "tx-m";
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s6_8ch: i2s@fddf4000 {
- compatible = "rockchip,rk3588-i2s-tdm";
- reg = <0x0 0xfddf4000 0x0 0x1000>;
- interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>;
- clock-names = "mclk_tx", "mclk_rx", "hclk";
- assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>;
- assigned-clock-parents = <&cru PLL_AUPLL>;
- dmas = <&dmac2 4>;
- dma-names = "tx";
- power-domains = <&power RK3588_PD_VO1>;
- resets = <&cru SRST_M_I2S6_8CH_TX>;
- reset-names = "tx-m";
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s7_8ch: i2s@fddf8000 {
- compatible = "rockchip,rk3588-i2s-tdm";
- reg = <0x0 0xfddf8000 0x0 0x1000>;
- interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>;
- clock-names = "mclk_tx", "mclk_rx", "hclk";
- assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>;
- assigned-clock-parents = <&cru PLL_AUPLL>;
- dmas = <&dmac2 21>;
- dma-names = "rx";
- power-domains = <&power RK3588_PD_VO1>;
- resets = <&cru SRST_M_I2S7_8CH_RX>;
- reset-names = "rx-m";
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s10_8ch: i2s@fde00000 {
- compatible = "rockchip,rk3588-i2s-tdm";
- reg = <0x0 0xfde00000 0x0 0x1000>;
- interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>;
- clock-names = "mclk_tx", "mclk_rx", "hclk";
- assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>;
- assigned-clock-parents = <&cru PLL_AUPLL>;
- dmas = <&dmac2 24>;
- dma-names = "rx";
- power-domains = <&power RK3588_PD_VO1>;
- resets = <&cru SRST_M_I2S10_8CH_RX>;
- reset-names = "rx-m";
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- pcie3x4: pcie@fe150000 {
- compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
- #address-cells = <3>;
- #size-cells = <2>;
- bus-range = <0x00 0x0f>;
- clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
- <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
- <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
- clock-names = "aclk_mst", "aclk_slv",
- "aclk_dbi", "pclk",
- "aux", "pipe";
- device_type = "pci";
- interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "sys", "pmc", "msg", "legacy", "err";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie3x4_intc 0>,
- <0 0 0 2 &pcie3x4_intc 1>,
- <0 0 0 3 &pcie3x4_intc 2>,
- <0 0 0 4 &pcie3x4_intc 3>;
- linux,pci-domain = <0>;
- max-link-speed = <3>;
- msi-map = <0x0000 &its1 0x0000 0x1000>;
- num-lanes = <4>;
- phys = <&pcie30phy>;
- phy-names = "pcie-phy";
- power-domains = <&power RK3588_PD_PCIE>;
- ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
- <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>,
- <0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>;
- reg = <0xa 0x40000000 0x0 0x00400000>,
- <0x0 0xfe150000 0x0 0x00010000>,
- <0x0 0xf0000000 0x0 0x00100000>;
- reg-names = "dbi", "apb", "config";
- resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
- reset-names = "pwr", "pipe";
- status = "disabled";
-
- pcie3x4_intc: legacy-interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>;
- };
- };
-
- pcie3x2: pcie@fe160000 {
- compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
- #address-cells = <3>;
- #size-cells = <2>;
- bus-range = <0x10 0x1f>;
- clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
- <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
- <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>;
- clock-names = "aclk_mst", "aclk_slv",
- "aclk_dbi", "pclk",
- "aux", "pipe";
- device_type = "pci";
- interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "sys", "pmc", "msg", "legacy", "err";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
- <0 0 0 2 &pcie3x2_intc 1>,
- <0 0 0 3 &pcie3x2_intc 2>,
- <0 0 0 4 &pcie3x2_intc 3>;
- linux,pci-domain = <1>;
- max-link-speed = <3>;
- msi-map = <0x1000 &its1 0x1000 0x1000>;
- num-lanes = <2>;
- phys = <&pcie30phy>;
- phy-names = "pcie-phy";
- power-domains = <&power RK3588_PD_PCIE>;
- ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>,
- <0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>,
- <0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>;
- reg = <0xa 0x40400000 0x0 0x00400000>,
- <0x0 0xfe160000 0x0 0x00010000>,
- <0x0 0xf1000000 0x0 0x00100000>;
- reg-names = "dbi", "apb", "config";
- resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
- reset-names = "pwr", "pipe";
- status = "disabled";
-
- pcie3x2_intc: legacy-interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>;
- };
- };
-
- pcie2x1l0: pcie@fe170000 {
- compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
- bus-range = <0x20 0x2f>;
- clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>,
- <&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>,
- <&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>;
- clock-names = "aclk_mst", "aclk_slv",
- "aclk_dbi", "pclk",
- "aux", "pipe";
- device_type = "pci";
- interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "sys", "pmc", "msg", "legacy", "err";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>,
- <0 0 0 2 &pcie2x1l0_intc 1>,
- <0 0 0 3 &pcie2x1l0_intc 2>,
- <0 0 0 4 &pcie2x1l0_intc 3>;
- linux,pci-domain = <2>;
- max-link-speed = <2>;
- msi-map = <0x2000 &its0 0x2000 0x1000>;
- num-lanes = <1>;
- phys = <&combphy1_ps PHY_TYPE_PCIE>;
- phy-names = "pcie-phy";
- power-domains = <&power RK3588_PD_PCIE>;
- ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
- <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>,
- <0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>;
- reg = <0xa 0x40800000 0x0 0x00400000>,
- <0x0 0xfe170000 0x0 0x00010000>,
- <0x0 0xf2000000 0x0 0x00100000>;
- reg-names = "dbi", "apb", "config";
- resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>;
- reset-names = "pwr", "pipe";
- #address-cells = <3>;
- #size-cells = <2>;
- status = "disabled";
-
- pcie2x1l0_intc: legacy-interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>;
- };
- };
-
- gmac0: ethernet@fe1b0000 {
- compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
- reg = <0x0 0xfe1b0000 0x0 0x10000>;
- interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "macirq", "eth_wake_irq";
- clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
- <&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>,
- <&cru CLK_GMAC0_PTP_REF>;
- clock-names = "stmmaceth", "clk_mac_ref",
- "pclk_mac", "aclk_mac",
- "ptp_ref";
- power-domains = <&power RK3588_PD_GMAC>;
- resets = <&cru SRST_A_GMAC0>;
- reset-names = "stmmaceth";
- rockchip,grf = <&sys_grf>;
- rockchip,php-grf = <&php_grf>;
- snps,axi-config = <&gmac0_stmmac_axi_setup>;
- snps,mixed-burst;
- snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
- snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
- snps,tso;
- status = "disabled";
-
- mdio0: mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- };
-
- gmac0_stmmac_axi_setup: stmmac-axi-config {
- snps,blen = <0 0 0 0 16 8 4>;
- snps,wr_osr_lmt = <4>;
- snps,rd_osr_lmt = <8>;
- };
-
- gmac0_mtl_rx_setup: rx-queues-config {
- snps,rx-queues-to-use = <2>;
- queue0 {};
- queue1 {};
- };
-
- gmac0_mtl_tx_setup: tx-queues-config {
- snps,tx-queues-to-use = <2>;
- queue0 {};
- queue1 {};
- };
- };
-
- sata1: sata@fe220000 {
- compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
- reg = <0 0xfe220000 0 0x1000>;
- interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
- <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>,
- <&cru CLK_PIPEPHY1_PIPE_ASIC_G>;
- clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
- ports-implemented = <0x1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata-port@0 {
- reg = <0>;
- hba-port-cap = <HBA_PORT_FBSCP>;
- phys = <&combphy1_ps PHY_TYPE_SATA>;
- phy-names = "sata-phy";
- snps,rx-ts-max = <32>;
- snps,tx-ts-max = <32>;
- };
- };
-
- usbdp_phy1: phy@fed90000 {
- compatible = "rockchip,rk3588-usbdp-phy";
- reg = <0x0 0xfed90000 0x0 0x10000>;
- #phy-cells = <1>;
- clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
- <&cru CLK_USBDP_PHY1_IMMORTAL>,
- <&cru PCLK_USBDPPHY1>,
- <&u2phy1>;
- clock-names = "refclk", "immortal", "pclk", "utmi";
- resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>,
- <&cru SRST_USBDP_COMBO_PHY1_CMN>,
- <&cru SRST_USBDP_COMBO_PHY1_LANE>,
- <&cru SRST_USBDP_COMBO_PHY1_PCS>,
- <&cru SRST_P_USBDPPHY1>;
- reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
- rockchip,u2phy-grf = <&usb2phy1_grf>;
- rockchip,usb-grf = <&usb_grf>;
- rockchip,usbdpphy-grf = <&usbdpphy1_grf>;
- rockchip,vo-grf = <&vo0_grf>;
- status = "disabled";
- };
-
- combphy1_ps: phy@fee10000 {
- compatible = "rockchip,rk3588-naneng-combphy";
- reg = <0x0 0xfee10000 0x0 0x100>;
- clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>,
- <&cru PCLK_PHP_ROOT>;
- clock-names = "ref", "apb", "pipe";
- assigned-clocks = <&cru CLK_REF_PIPE_PHY1>;
- assigned-clock-rates = <100000000>;
- #phy-cells = <1>;
- resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>;
- reset-names = "phy", "apb";
- rockchip,pipe-grf = <&php_grf>;
- rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
- status = "disabled";
- };
-
- pcie30phy: phy@fee80000 {
- compatible = "rockchip,rk3588-pcie3-phy";
- reg = <0x0 0xfee80000 0x0 0x20000>;
- #phy-cells = <0>;
- clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>;
- clock-names = "pclk";
- resets = <&cru SRST_PCIE30_PHY>;
- reset-names = "phy";
- rockchip,pipe-grf = <&php_grf>;
- rockchip,phy-grf = <&pcie30_phy_grf>;
- status = "disabled";
- };
-};
+#include "rk3588-extra.dtsi"
diff --git a/dts/upstream/src/arm64/rockchip/rk3588j.dtsi b/dts/upstream/src/arm64/rockchip/rk3588j.dtsi
index 38b9dbf..0bbeee3 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588j.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588j.dtsi
@@ -4,4 +4,4 @@
*
*/
-#include "rk3588.dtsi"
+#include "rk3588-extra.dtsi"
diff --git a/dts/upstream/src/arm64/rockchip/rk3588s.dtsi b/dts/upstream/src/arm64/rockchip/rk3588s.dtsi
index 6ac5ac8..a379269 100644
--- a/dts/upstream/src/arm64/rockchip/rk3588s.dtsi
+++ b/dts/upstream/src/arm64/rockchip/rk3588s.dtsi
@@ -1,2670 +1,7 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ *
*/
-#include <dt-bindings/clock/rockchip,rk3588-cru.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/power/rk3588-power.h>
-#include <dt-bindings/reset/rockchip,rk3588-cru.h>
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/ata/ahci.h>
-
-/ {
- compatible = "rockchip,rk3588";
-
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- gpio2 = &gpio2;
- gpio3 = &gpio3;
- gpio4 = &gpio4;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c7;
- i2c8 = &i2c8;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial5 = &uart5;
- serial6 = &uart6;
- serial7 = &uart7;
- serial8 = &uart8;
- serial9 = &uart9;
- spi0 = &spi0;
- spi1 = &spi1;
- spi2 = &spi2;
- spi3 = &spi3;
- spi4 = &spi4;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&cpu_l0>;
- };
- core1 {
- cpu = <&cpu_l1>;
- };
- core2 {
- cpu = <&cpu_l2>;
- };
- core3 {
- cpu = <&cpu_l3>;
- };
- };
- cluster1 {
- core0 {
- cpu = <&cpu_b0>;
- };
- core1 {
- cpu = <&cpu_b1>;
- };
- };
- cluster2 {
- core0 {
- cpu = <&cpu_b2>;
- };
- core1 {
- cpu = <&cpu_b3>;
- };
- };
- };
-
- cpu_l0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x0>;
- enable-method = "psci";
- capacity-dmips-mhz = <530>;
- clocks = <&scmi_clk SCMI_CLK_CPUL>;
- assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>;
- assigned-clock-rates = <816000000>;
- cpu-idle-states = <&CPU_SLEEP>;
- i-cache-size = <32768>;
- i-cache-line-size = <64>;
- i-cache-sets = <128>;
- d-cache-size = <32768>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&l2_cache_l0>;
- dynamic-power-coefficient = <228>;
- #cooling-cells = <2>;
- };
-
- cpu_l1: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x100>;
- enable-method = "psci";
- capacity-dmips-mhz = <530>;
- clocks = <&scmi_clk SCMI_CLK_CPUL>;
- cpu-idle-states = <&CPU_SLEEP>;
- i-cache-size = <32768>;
- i-cache-line-size = <64>;
- i-cache-sets = <128>;
- d-cache-size = <32768>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&l2_cache_l1>;
- dynamic-power-coefficient = <228>;
- #cooling-cells = <2>;
- };
-
- cpu_l2: cpu@200 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x200>;
- enable-method = "psci";
- capacity-dmips-mhz = <530>;
- clocks = <&scmi_clk SCMI_CLK_CPUL>;
- cpu-idle-states = <&CPU_SLEEP>;
- i-cache-size = <32768>;
- i-cache-line-size = <64>;
- i-cache-sets = <128>;
- d-cache-size = <32768>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&l2_cache_l2>;
- dynamic-power-coefficient = <228>;
- #cooling-cells = <2>;
- };
-
- cpu_l3: cpu@300 {
- device_type = "cpu";
- compatible = "arm,cortex-a55";
- reg = <0x300>;
- enable-method = "psci";
- capacity-dmips-mhz = <530>;
- clocks = <&scmi_clk SCMI_CLK_CPUL>;
- cpu-idle-states = <&CPU_SLEEP>;
- i-cache-size = <32768>;
- i-cache-line-size = <64>;
- i-cache-sets = <128>;
- d-cache-size = <32768>;
- d-cache-line-size = <64>;
- d-cache-sets = <128>;
- next-level-cache = <&l2_cache_l3>;
- dynamic-power-coefficient = <228>;
- #cooling-cells = <2>;
- };
-
- cpu_b0: cpu@400 {
- device_type = "cpu";
- compatible = "arm,cortex-a76";
- reg = <0x400>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- clocks = <&scmi_clk SCMI_CLK_CPUB01>;
- assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>;
- assigned-clock-rates = <816000000>;
- cpu-idle-states = <&CPU_SLEEP>;
- i-cache-size = <65536>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <65536>;
- d-cache-line-size = <64>;
- d-cache-sets = <256>;
- next-level-cache = <&l2_cache_b0>;
- dynamic-power-coefficient = <416>;
- #cooling-cells = <2>;
- };
-
- cpu_b1: cpu@500 {
- device_type = "cpu";
- compatible = "arm,cortex-a76";
- reg = <0x500>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- clocks = <&scmi_clk SCMI_CLK_CPUB01>;
- cpu-idle-states = <&CPU_SLEEP>;
- i-cache-size = <65536>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <65536>;
- d-cache-line-size = <64>;
- d-cache-sets = <256>;
- next-level-cache = <&l2_cache_b1>;
- dynamic-power-coefficient = <416>;
- #cooling-cells = <2>;
- };
-
- cpu_b2: cpu@600 {
- device_type = "cpu";
- compatible = "arm,cortex-a76";
- reg = <0x600>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- clocks = <&scmi_clk SCMI_CLK_CPUB23>;
- assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>;
- assigned-clock-rates = <816000000>;
- cpu-idle-states = <&CPU_SLEEP>;
- i-cache-size = <65536>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <65536>;
- d-cache-line-size = <64>;
- d-cache-sets = <256>;
- next-level-cache = <&l2_cache_b2>;
- dynamic-power-coefficient = <416>;
- #cooling-cells = <2>;
- };
-
- cpu_b3: cpu@700 {
- device_type = "cpu";
- compatible = "arm,cortex-a76";
- reg = <0x700>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- clocks = <&scmi_clk SCMI_CLK_CPUB23>;
- cpu-idle-states = <&CPU_SLEEP>;
- i-cache-size = <65536>;
- i-cache-line-size = <64>;
- i-cache-sets = <256>;
- d-cache-size = <65536>;
- d-cache-line-size = <64>;
- d-cache-sets = <256>;
- next-level-cache = <&l2_cache_b3>;
- dynamic-power-coefficient = <416>;
- #cooling-cells = <2>;
- };
-
- idle-states {
- entry-method = "psci";
- CPU_SLEEP: cpu-sleep {
- compatible = "arm,idle-state";
- local-timer-stop;
- arm,psci-suspend-param = <0x0010000>;
- entry-latency-us = <100>;
- exit-latency-us = <120>;
- min-residency-us = <1000>;
- };
- };
-
- l2_cache_l0: l2-cache-l0 {
- compatible = "cache";
- cache-size = <131072>;
- cache-line-size = <64>;
- cache-sets = <512>;
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&l3_cache>;
- };
-
- l2_cache_l1: l2-cache-l1 {
- compatible = "cache";
- cache-size = <131072>;
- cache-line-size = <64>;
- cache-sets = <512>;
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&l3_cache>;
- };
-
- l2_cache_l2: l2-cache-l2 {
- compatible = "cache";
- cache-size = <131072>;
- cache-line-size = <64>;
- cache-sets = <512>;
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&l3_cache>;
- };
-
- l2_cache_l3: l2-cache-l3 {
- compatible = "cache";
- cache-size = <131072>;
- cache-line-size = <64>;
- cache-sets = <512>;
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&l3_cache>;
- };
-
- l2_cache_b0: l2-cache-b0 {
- compatible = "cache";
- cache-size = <524288>;
- cache-line-size = <64>;
- cache-sets = <1024>;
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&l3_cache>;
- };
-
- l2_cache_b1: l2-cache-b1 {
- compatible = "cache";
- cache-size = <524288>;
- cache-line-size = <64>;
- cache-sets = <1024>;
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&l3_cache>;
- };
-
- l2_cache_b2: l2-cache-b2 {
- compatible = "cache";
- cache-size = <524288>;
- cache-line-size = <64>;
- cache-sets = <1024>;
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&l3_cache>;
- };
-
- l2_cache_b3: l2-cache-b3 {
- compatible = "cache";
- cache-size = <524288>;
- cache-line-size = <64>;
- cache-sets = <1024>;
- cache-level = <2>;
- cache-unified;
- next-level-cache = <&l3_cache>;
- };
-
- l3_cache: l3-cache {
- compatible = "cache";
- cache-size = <3145728>;
- cache-line-size = <64>;
- cache-sets = <4096>;
- cache-level = <3>;
- cache-unified;
- };
- };
-
- display_subsystem: display-subsystem {
- compatible = "rockchip,display-subsystem";
- ports = <&vop_out>;
- };
-
- firmware {
- optee: optee {
- compatible = "linaro,optee-tz";
- method = "smc";
- };
-
- scmi: scmi {
- compatible = "arm,scmi-smc";
- arm,smc-id = <0x82000010>;
- shmem = <&scmi_shmem>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- scmi_clk: protocol@14 {
- reg = <0x14>;
- #clock-cells = <1>;
- };
-
- scmi_reset: protocol@16 {
- reg = <0x16>;
- #reset-cells = <1>;
- };
- };
- };
-
- pmu-a55 {
- compatible = "arm,cortex-a55-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition0>;
- };
-
- pmu-a76 {
- compatible = "arm,cortex-a76-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition1>;
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- spll: clock-0 {
- compatible = "fixed-clock";
- clock-frequency = <702000000>;
- clock-output-names = "spll";
- #clock-cells = <0>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
- };
-
- xin24m: clock-1 {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xin24m";
- #clock-cells = <0>;
- };
-
- xin32k: clock-2 {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "xin32k";
- #clock-cells = <0>;
- };
-
- pmu_sram: sram@10f000 {
- compatible = "mmio-sram";
- reg = <0x0 0x0010f000 0x0 0x100>;
- ranges = <0 0x0 0x0010f000 0x100>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- scmi_shmem: sram@0 {
- compatible = "arm,scmi-shmem";
- reg = <0x0 0x100>;
- };
- };
-
- gpu: gpu@fb000000 {
- compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf";
- reg = <0x0 0xfb000000 0x0 0x200000>;
- #cooling-cells = <2>;
- assigned-clocks = <&scmi_clk SCMI_CLK_GPU>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>,
- <&cru CLK_GPU_STACKS>;
- clock-names = "core", "coregroup", "stacks";
- dynamic-power-coefficient = <2982>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "job", "mmu", "gpu";
- operating-points-v2 = <&gpu_opp_table>;
- power-domains = <&power RK3588_PD_GPU>;
- status = "disabled";
-
- gpu_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- opp-microvolt = <675000 675000 850000>;
- };
- opp-400000000 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <675000 675000 850000>;
- };
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <675000 675000 850000>;
- };
- opp-600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <675000 675000 850000>;
- };
- opp-700000000 {
- opp-hz = /bits/ 64 <700000000>;
- opp-microvolt = <700000 700000 850000>;
- };
- opp-800000000 {
- opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = <750000 750000 850000>;
- };
- opp-900000000 {
- opp-hz = /bits/ 64 <900000000>;
- opp-microvolt = <800000 800000 850000>;
- };
- opp-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <850000 850000 850000>;
- };
- };
- };
-
- usb_host0_xhci: usb@fc000000 {
- compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
- reg = <0x0 0xfc000000 0x0 0x400000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>,
- <&cru ACLK_USB3OTG0>;
- clock-names = "ref_clk", "suspend_clk", "bus_clk";
- dr_mode = "otg";
- phys = <&u2phy0_otg>, <&usbdp_phy0 PHY_TYPE_USB3>;
- phy-names = "usb2-phy", "usb3-phy";
- phy_type = "utmi_wide";
- power-domains = <&power RK3588_PD_USB>;
- resets = <&cru SRST_A_USB3OTG0>;
- snps,dis_enblslpm_quirk;
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- snps,dis-u2-freeclk-exists-quirk;
- snps,dis-del-phy-power-chg-quirk;
- snps,dis-tx-ipgap-linecheck-quirk;
- status = "disabled";
- };
-
- usb_host0_ehci: usb@fc800000 {
- compatible = "rockchip,rk3588-ehci", "generic-ehci";
- reg = <0x0 0xfc800000 0x0 0x40000>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>;
- phys = <&u2phy2_host>;
- phy-names = "usb";
- power-domains = <&power RK3588_PD_USB>;
- status = "disabled";
- };
-
- usb_host0_ohci: usb@fc840000 {
- compatible = "rockchip,rk3588-ohci", "generic-ohci";
- reg = <0x0 0xfc840000 0x0 0x40000>;
- interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>;
- phys = <&u2phy2_host>;
- phy-names = "usb";
- power-domains = <&power RK3588_PD_USB>;
- status = "disabled";
- };
-
- usb_host1_ehci: usb@fc880000 {
- compatible = "rockchip,rk3588-ehci", "generic-ehci";
- reg = <0x0 0xfc880000 0x0 0x40000>;
- interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>;
- phys = <&u2phy3_host>;
- phy-names = "usb";
- power-domains = <&power RK3588_PD_USB>;
- status = "disabled";
- };
-
- usb_host1_ohci: usb@fc8c0000 {
- compatible = "rockchip,rk3588-ohci", "generic-ohci";
- reg = <0x0 0xfc8c0000 0x0 0x40000>;
- interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>;
- phys = <&u2phy3_host>;
- phy-names = "usb";
- power-domains = <&power RK3588_PD_USB>;
- status = "disabled";
- };
-
- usb_host2_xhci: usb@fcd00000 {
- compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
- reg = <0x0 0xfcd00000 0x0 0x400000>;
- interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru REF_CLK_USB3OTG2>, <&cru SUSPEND_CLK_USB3OTG2>,
- <&cru ACLK_USB3OTG2>, <&cru CLK_UTMI_OTG2>,
- <&cru CLK_PIPEPHY2_PIPE_U3_G>;
- clock-names = "ref_clk", "suspend_clk", "bus_clk", "utmi", "pipe";
- dr_mode = "host";
- phys = <&combphy2_psu PHY_TYPE_USB3>;
- phy-names = "usb3-phy";
- phy_type = "utmi_wide";
- resets = <&cru SRST_A_USB3OTG2>;
- snps,dis_enblslpm_quirk;
- snps,dis-u2-freeclk-exists-quirk;
- snps,dis-del-phy-power-chg-quirk;
- snps,dis-tx-ipgap-linecheck-quirk;
- snps,dis_rxdet_inp3_quirk;
- status = "disabled";
- };
-
- mmu600_pcie: iommu@fc900000 {
- compatible = "arm,smmu-v3";
- reg = <0x0 0xfc900000 0x0 0x200000>;
- interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
- #iommu-cells = <1>;
- status = "disabled";
- };
-
- mmu600_php: iommu@fcb00000 {
- compatible = "arm,smmu-v3";
- reg = <0x0 0xfcb00000 0x0 0x200000>;
- interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
- #iommu-cells = <1>;
- status = "disabled";
- };
-
- pmu1grf: syscon@fd58a000 {
- compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd";
- reg = <0x0 0xfd58a000 0x0 0x10000>;
- };
-
- sys_grf: syscon@fd58c000 {
- compatible = "rockchip,rk3588-sys-grf", "syscon";
- reg = <0x0 0xfd58c000 0x0 0x1000>;
- };
-
- vop_grf: syscon@fd5a4000 {
- compatible = "rockchip,rk3588-vop-grf", "syscon";
- reg = <0x0 0xfd5a4000 0x0 0x2000>;
- };
-
- vo0_grf: syscon@fd5a6000 {
- compatible = "rockchip,rk3588-vo-grf", "syscon";
- reg = <0x0 0xfd5a6000 0x0 0x2000>;
- clocks = <&cru PCLK_VO0GRF>;
- };
-
- vo1_grf: syscon@fd5a8000 {
- compatible = "rockchip,rk3588-vo-grf", "syscon";
- reg = <0x0 0xfd5a8000 0x0 0x100>;
- clocks = <&cru PCLK_VO1GRF>;
- };
-
- usb_grf: syscon@fd5ac000 {
- compatible = "rockchip,rk3588-usb-grf", "syscon";
- reg = <0x0 0xfd5ac000 0x0 0x4000>;
- };
-
- php_grf: syscon@fd5b0000 {
- compatible = "rockchip,rk3588-php-grf", "syscon";
- reg = <0x0 0xfd5b0000 0x0 0x1000>;
- };
-
- pipe_phy0_grf: syscon@fd5bc000 {
- compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
- reg = <0x0 0xfd5bc000 0x0 0x100>;
- };
-
- pipe_phy2_grf: syscon@fd5c4000 {
- compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
- reg = <0x0 0xfd5c4000 0x0 0x100>;
- };
-
- usbdpphy0_grf: syscon@fd5c8000 {
- compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
- reg = <0x0 0xfd5c8000 0x0 0x4000>;
- };
-
- usb2phy0_grf: syscon@fd5d0000 {
- compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
- reg = <0x0 0xfd5d0000 0x0 0x4000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- u2phy0: usb2phy@0 {
- compatible = "rockchip,rk3588-usb2phy";
- reg = <0x0 0x10>;
- #clock-cells = <0>;
- clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
- clock-names = "phyclk";
- clock-output-names = "usb480m_phy0";
- interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>;
- resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>;
- reset-names = "phy", "apb";
- status = "disabled";
-
- u2phy0_otg: otg-port {
- #phy-cells = <0>;
- status = "disabled";
- };
- };
- };
-
- usb2phy2_grf: syscon@fd5d8000 {
- compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
- reg = <0x0 0xfd5d8000 0x0 0x4000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- u2phy2: usb2phy@8000 {
- compatible = "rockchip,rk3588-usb2phy";
- reg = <0x8000 0x10>;
- #clock-cells = <0>;
- clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
- clock-names = "phyclk";
- clock-output-names = "usb480m_phy2";
- interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
- resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>;
- reset-names = "phy", "apb";
- status = "disabled";
-
- u2phy2_host: host-port {
- #phy-cells = <0>;
- status = "disabled";
- };
- };
- };
-
- usb2phy3_grf: syscon@fd5dc000 {
- compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
- reg = <0x0 0xfd5dc000 0x0 0x4000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- u2phy3: usb2phy@c000 {
- compatible = "rockchip,rk3588-usb2phy";
- reg = <0xc000 0x10>;
- #clock-cells = <0>;
- clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
- clock-names = "phyclk";
- clock-output-names = "usb480m_phy3";
- interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
- resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>;
- reset-names = "phy", "apb";
- status = "disabled";
-
- u2phy3_host: host-port {
- #phy-cells = <0>;
- status = "disabled";
- };
- };
- };
-
- hdptxphy0_grf: syscon@fd5e0000 {
- compatible = "rockchip,rk3588-hdptxphy-grf", "syscon";
- reg = <0x0 0xfd5e0000 0x0 0x100>;
- };
-
- ioc: syscon@fd5f0000 {
- compatible = "rockchip,rk3588-ioc", "syscon";
- reg = <0x0 0xfd5f0000 0x0 0x10000>;
- };
-
- system_sram1: sram@fd600000 {
- compatible = "mmio-sram";
- reg = <0x0 0xfd600000 0x0 0x100000>;
- ranges = <0x0 0x0 0xfd600000 0x100000>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-
- cru: clock-controller@fd7c0000 {
- compatible = "rockchip,rk3588-cru";
- reg = <0x0 0xfd7c0000 0x0 0x5c000>;
- assigned-clocks =
- <&cru PLL_PPLL>, <&cru PLL_AUPLL>,
- <&cru PLL_NPLL>, <&cru PLL_GPLL>,
- <&cru ACLK_CENTER_ROOT>,
- <&cru HCLK_CENTER_ROOT>, <&cru ACLK_CENTER_LOW_ROOT>,
- <&cru ACLK_TOP_ROOT>, <&cru PCLK_TOP_ROOT>,
- <&cru ACLK_LOW_TOP_ROOT>, <&cru PCLK_PMU0_ROOT>,
- <&cru HCLK_PMU_CM0_ROOT>, <&cru ACLK_VOP>,
- <&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>,
- <&cru CLK_GPU>;
- assigned-clock-rates =
- <1100000000>, <786432000>,
- <850000000>, <1188000000>,
- <702000000>,
- <400000000>, <500000000>,
- <800000000>, <100000000>,
- <400000000>, <100000000>,
- <200000000>, <500000000>,
- <375000000>, <150000000>,
- <200000000>;
- rockchip,grf = <&php_grf>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- i2c0: i2c@fd880000 {
- compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfd880000 0x0 0x1000>;
- interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>;
- clock-names = "i2c", "pclk";
- pinctrl-0 = <&i2c0m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- uart0: serial@fd890000 {
- compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfd890000 0x0 0x100>;
- interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 6>, <&dmac0 7>;
- dma-names = "tx", "rx";
- pinctrl-0 = <&uart0m1_xfer>;
- pinctrl-names = "default";
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- pwm0: pwm@fd8b0000 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfd8b0000 0x0 0x10>;
- clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm0m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm1: pwm@fd8b0010 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfd8b0010 0x0 0x10>;
- clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm1m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm2: pwm@fd8b0020 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfd8b0020 0x0 0x10>;
- clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm2m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm3: pwm@fd8b0030 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfd8b0030 0x0 0x10>;
- clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm3m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pmu: power-management@fd8d8000 {
- compatible = "rockchip,rk3588-pmu", "syscon", "simple-mfd";
- reg = <0x0 0xfd8d8000 0x0 0x400>;
-
- power: power-controller {
- compatible = "rockchip,rk3588-power-controller";
- #address-cells = <1>;
- #power-domain-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- /* These power domains are grouped by VD_NPU */
- power-domain@RK3588_PD_NPU {
- reg = <RK3588_PD_NPU>;
- #power-domain-cells = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- power-domain@RK3588_PD_NPUTOP {
- reg = <RK3588_PD_NPUTOP>;
- clocks = <&cru HCLK_NPU_ROOT>,
- <&cru PCLK_NPU_ROOT>,
- <&cru CLK_NPU_DSU0>,
- <&cru HCLK_NPU_CM0_ROOT>;
- pm_qos = <&qos_npu0_mwr>,
- <&qos_npu0_mro>,
- <&qos_mcu_npu>;
- #power-domain-cells = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- power-domain@RK3588_PD_NPU1 {
- reg = <RK3588_PD_NPU1>;
- clocks = <&cru HCLK_NPU_ROOT>,
- <&cru PCLK_NPU_ROOT>,
- <&cru CLK_NPU_DSU0>;
- pm_qos = <&qos_npu1>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_NPU2 {
- reg = <RK3588_PD_NPU2>;
- clocks = <&cru HCLK_NPU_ROOT>,
- <&cru PCLK_NPU_ROOT>,
- <&cru CLK_NPU_DSU0>;
- pm_qos = <&qos_npu2>;
- #power-domain-cells = <0>;
- };
- };
- };
- /* These power domains are grouped by VD_GPU */
- power-domain@RK3588_PD_GPU {
- reg = <RK3588_PD_GPU>;
- clocks = <&cru CLK_GPU>,
- <&cru CLK_GPU_COREGROUP>,
- <&cru CLK_GPU_STACKS>;
- pm_qos = <&qos_gpu_m0>,
- <&qos_gpu_m1>,
- <&qos_gpu_m2>,
- <&qos_gpu_m3>;
- #power-domain-cells = <0>;
- };
- /* These power domains are grouped by VD_VCODEC */
- power-domain@RK3588_PD_VCODEC {
- reg = <RK3588_PD_VCODEC>;
- #address-cells = <1>;
- #size-cells = <0>;
- #power-domain-cells = <0>;
-
- power-domain@RK3588_PD_RKVDEC0 {
- reg = <RK3588_PD_RKVDEC0>;
- clocks = <&cru HCLK_RKVDEC0>,
- <&cru HCLK_VDPU_ROOT>,
- <&cru ACLK_VDPU_ROOT>,
- <&cru ACLK_RKVDEC0>,
- <&cru ACLK_RKVDEC_CCU>;
- pm_qos = <&qos_rkvdec0>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_RKVDEC1 {
- reg = <RK3588_PD_RKVDEC1>;
- clocks = <&cru HCLK_RKVDEC1>,
- <&cru HCLK_VDPU_ROOT>,
- <&cru ACLK_VDPU_ROOT>,
- <&cru ACLK_RKVDEC1>;
- pm_qos = <&qos_rkvdec1>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_VENC0 {
- reg = <RK3588_PD_VENC0>;
- clocks = <&cru HCLK_RKVENC0>,
- <&cru ACLK_RKVENC0>;
- pm_qos = <&qos_rkvenc0_m0ro>,
- <&qos_rkvenc0_m1ro>,
- <&qos_rkvenc0_m2wo>;
- #address-cells = <1>;
- #size-cells = <0>;
- #power-domain-cells = <0>;
-
- power-domain@RK3588_PD_VENC1 {
- reg = <RK3588_PD_VENC1>;
- clocks = <&cru HCLK_RKVENC1>,
- <&cru HCLK_RKVENC0>,
- <&cru ACLK_RKVENC0>,
- <&cru ACLK_RKVENC1>;
- pm_qos = <&qos_rkvenc1_m0ro>,
- <&qos_rkvenc1_m1ro>,
- <&qos_rkvenc1_m2wo>;
- #power-domain-cells = <0>;
- };
- };
- };
- /* These power domains are grouped by VD_LOGIC */
- power-domain@RK3588_PD_VDPU {
- reg = <RK3588_PD_VDPU>;
- clocks = <&cru HCLK_VDPU_ROOT>,
- <&cru ACLK_VDPU_LOW_ROOT>,
- <&cru ACLK_VDPU_ROOT>,
- <&cru ACLK_JPEG_DECODER_ROOT>,
- <&cru ACLK_IEP2P0>,
- <&cru HCLK_IEP2P0>,
- <&cru ACLK_JPEG_ENCODER0>,
- <&cru HCLK_JPEG_ENCODER0>,
- <&cru ACLK_JPEG_ENCODER1>,
- <&cru HCLK_JPEG_ENCODER1>,
- <&cru ACLK_JPEG_ENCODER2>,
- <&cru HCLK_JPEG_ENCODER2>,
- <&cru ACLK_JPEG_ENCODER3>,
- <&cru HCLK_JPEG_ENCODER3>,
- <&cru ACLK_JPEG_DECODER>,
- <&cru HCLK_JPEG_DECODER>,
- <&cru ACLK_RGA2>,
- <&cru HCLK_RGA2>;
- pm_qos = <&qos_iep>,
- <&qos_jpeg_dec>,
- <&qos_jpeg_enc0>,
- <&qos_jpeg_enc1>,
- <&qos_jpeg_enc2>,
- <&qos_jpeg_enc3>,
- <&qos_rga2_mro>,
- <&qos_rga2_mwo>;
- #address-cells = <1>;
- #size-cells = <0>;
- #power-domain-cells = <0>;
-
-
- power-domain@RK3588_PD_AV1 {
- reg = <RK3588_PD_AV1>;
- clocks = <&cru PCLK_AV1>,
- <&cru ACLK_AV1>,
- <&cru HCLK_VDPU_ROOT>;
- pm_qos = <&qos_av1>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_RKVDEC0 {
- reg = <RK3588_PD_RKVDEC0>;
- clocks = <&cru HCLK_RKVDEC0>,
- <&cru HCLK_VDPU_ROOT>,
- <&cru ACLK_VDPU_ROOT>,
- <&cru ACLK_RKVDEC0>;
- pm_qos = <&qos_rkvdec0>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_RKVDEC1 {
- reg = <RK3588_PD_RKVDEC1>;
- clocks = <&cru HCLK_RKVDEC1>,
- <&cru HCLK_VDPU_ROOT>,
- <&cru ACLK_VDPU_ROOT>;
- pm_qos = <&qos_rkvdec1>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_RGA30 {
- reg = <RK3588_PD_RGA30>;
- clocks = <&cru ACLK_RGA3_0>,
- <&cru HCLK_RGA3_0>;
- pm_qos = <&qos_rga3_0>;
- #power-domain-cells = <0>;
- };
- };
- power-domain@RK3588_PD_VOP {
- reg = <RK3588_PD_VOP>;
- clocks = <&cru PCLK_VOP_ROOT>,
- <&cru HCLK_VOP_ROOT>,
- <&cru ACLK_VOP>;
- pm_qos = <&qos_vop_m0>,
- <&qos_vop_m1>;
- #address-cells = <1>;
- #size-cells = <0>;
- #power-domain-cells = <0>;
-
- power-domain@RK3588_PD_VO0 {
- reg = <RK3588_PD_VO0>;
- clocks = <&cru PCLK_VO0_ROOT>,
- <&cru PCLK_VO0_S_ROOT>,
- <&cru HCLK_VO0_S_ROOT>,
- <&cru ACLK_VO0_ROOT>,
- <&cru HCLK_HDCP0>,
- <&cru ACLK_HDCP0>,
- <&cru HCLK_VOP_ROOT>;
- pm_qos = <&qos_hdcp0>;
- #power-domain-cells = <0>;
- };
- };
- power-domain@RK3588_PD_VO1 {
- reg = <RK3588_PD_VO1>;
- clocks = <&cru PCLK_VO1_ROOT>,
- <&cru PCLK_VO1_S_ROOT>,
- <&cru HCLK_VO1_S_ROOT>,
- <&cru HCLK_HDCP1>,
- <&cru ACLK_HDCP1>,
- <&cru ACLK_HDMIRX_ROOT>,
- <&cru HCLK_VO1USB_TOP_ROOT>;
- pm_qos = <&qos_hdcp1>,
- <&qos_hdmirx>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_VI {
- reg = <RK3588_PD_VI>;
- clocks = <&cru HCLK_VI_ROOT>,
- <&cru PCLK_VI_ROOT>,
- <&cru HCLK_ISP0>,
- <&cru ACLK_ISP0>,
- <&cru HCLK_VICAP>,
- <&cru ACLK_VICAP>;
- pm_qos = <&qos_isp0_mro>,
- <&qos_isp0_mwo>,
- <&qos_vicap_m0>,
- <&qos_vicap_m1>;
- #address-cells = <1>;
- #size-cells = <0>;
- #power-domain-cells = <0>;
-
- power-domain@RK3588_PD_ISP1 {
- reg = <RK3588_PD_ISP1>;
- clocks = <&cru HCLK_ISP1>,
- <&cru ACLK_ISP1>,
- <&cru HCLK_VI_ROOT>,
- <&cru PCLK_VI_ROOT>;
- pm_qos = <&qos_isp1_mwo>,
- <&qos_isp1_mro>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_FEC {
- reg = <RK3588_PD_FEC>;
- clocks = <&cru HCLK_FISHEYE0>,
- <&cru ACLK_FISHEYE0>,
- <&cru HCLK_FISHEYE1>,
- <&cru ACLK_FISHEYE1>,
- <&cru PCLK_VI_ROOT>;
- pm_qos = <&qos_fisheye0>,
- <&qos_fisheye1>;
- #power-domain-cells = <0>;
- };
- };
- power-domain@RK3588_PD_RGA31 {
- reg = <RK3588_PD_RGA31>;
- clocks = <&cru HCLK_RGA3_1>,
- <&cru ACLK_RGA3_1>;
- pm_qos = <&qos_rga3_1>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_USB {
- reg = <RK3588_PD_USB>;
- clocks = <&cru PCLK_PHP_ROOT>,
- <&cru ACLK_USB_ROOT>,
- <&cru ACLK_USB>,
- <&cru HCLK_USB_ROOT>,
- <&cru HCLK_HOST0>,
- <&cru HCLK_HOST_ARB0>,
- <&cru HCLK_HOST1>,
- <&cru HCLK_HOST_ARB1>;
- pm_qos = <&qos_usb3_0>,
- <&qos_usb3_1>,
- <&qos_usb2host_0>,
- <&qos_usb2host_1>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_GMAC {
- reg = <RK3588_PD_GMAC>;
- clocks = <&cru PCLK_PHP_ROOT>,
- <&cru ACLK_PCIE_ROOT>,
- <&cru ACLK_PHP_ROOT>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_PCIE {
- reg = <RK3588_PD_PCIE>;
- clocks = <&cru PCLK_PHP_ROOT>,
- <&cru ACLK_PCIE_ROOT>,
- <&cru ACLK_PHP_ROOT>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_SDIO {
- reg = <RK3588_PD_SDIO>;
- clocks = <&cru HCLK_SDIO>,
- <&cru HCLK_NVM_ROOT>;
- pm_qos = <&qos_sdio>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_AUDIO {
- reg = <RK3588_PD_AUDIO>;
- clocks = <&cru HCLK_AUDIO_ROOT>,
- <&cru PCLK_AUDIO_ROOT>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3588_PD_SDMMC {
- reg = <RK3588_PD_SDMMC>;
- pm_qos = <&qos_sdmmc>;
- #power-domain-cells = <0>;
- };
- };
- };
-
- av1d: video-codec@fdc70000 {
- compatible = "rockchip,rk3588-av1-vpu";
- reg = <0x0 0xfdc70000 0x0 0x800>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "vdpu";
- assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
- assigned-clock-rates = <400000000>, <400000000>;
- clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
- clock-names = "aclk", "hclk";
- power-domains = <&power RK3588_PD_AV1>;
- resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>;
- };
-
- vop: vop@fdd90000 {
- compatible = "rockchip,rk3588-vop";
- reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
- reg-names = "vop", "gamma-lut";
- interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_VOP>,
- <&cru HCLK_VOP>,
- <&cru DCLK_VOP0>,
- <&cru DCLK_VOP1>,
- <&cru DCLK_VOP2>,
- <&cru DCLK_VOP3>,
- <&cru PCLK_VOP_ROOT>;
- clock-names = "aclk",
- "hclk",
- "dclk_vp0",
- "dclk_vp1",
- "dclk_vp2",
- "dclk_vp3",
- "pclk_vop";
- iommus = <&vop_mmu>;
- power-domains = <&power RK3588_PD_VOP>;
- rockchip,grf = <&sys_grf>;
- rockchip,vop-grf = <&vop_grf>;
- rockchip,vo1-grf = <&vo1_grf>;
- rockchip,pmu = <&pmu>;
- status = "disabled";
-
- vop_out: ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vp0: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- vp1: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- vp2: port@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- vp3: port@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
- };
- };
-
- vop_mmu: iommu@fdd97e00 {
- compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
- reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
- interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
- clock-names = "aclk", "iface";
- #iommu-cells = <0>;
- power-domains = <&power RK3588_PD_VOP>;
- status = "disabled";
- };
-
- i2s4_8ch: i2s@fddc0000 {
- compatible = "rockchip,rk3588-i2s-tdm";
- reg = <0x0 0xfddc0000 0x0 0x1000>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru MCLK_I2S4_8CH_TX>, <&cru MCLK_I2S4_8CH_TX>, <&cru HCLK_I2S4_8CH>;
- clock-names = "mclk_tx", "mclk_rx", "hclk";
- assigned-clocks = <&cru CLK_I2S4_8CH_TX_SRC>;
- assigned-clock-parents = <&cru PLL_AUPLL>;
- dmas = <&dmac2 0>;
- dma-names = "tx";
- power-domains = <&power RK3588_PD_VO0>;
- resets = <&cru SRST_M_I2S4_8CH_TX>;
- reset-names = "tx-m";
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s5_8ch: i2s@fddf0000 {
- compatible = "rockchip,rk3588-i2s-tdm";
- reg = <0x0 0xfddf0000 0x0 0x1000>;
- interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru MCLK_I2S5_8CH_TX>, <&cru MCLK_I2S5_8CH_TX>, <&cru HCLK_I2S5_8CH>;
- clock-names = "mclk_tx", "mclk_rx", "hclk";
- assigned-clocks = <&cru CLK_I2S5_8CH_TX_SRC>;
- assigned-clock-parents = <&cru PLL_AUPLL>;
- dmas = <&dmac2 2>;
- dma-names = "tx";
- power-domains = <&power RK3588_PD_VO1>;
- resets = <&cru SRST_M_I2S5_8CH_TX>;
- reset-names = "tx-m";
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s9_8ch: i2s@fddfc000 {
- compatible = "rockchip,rk3588-i2s-tdm";
- reg = <0x0 0xfddfc000 0x0 0x1000>;
- interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru MCLK_I2S9_8CH_RX>, <&cru MCLK_I2S9_8CH_RX>, <&cru HCLK_I2S9_8CH>;
- clock-names = "mclk_tx", "mclk_rx", "hclk";
- assigned-clocks = <&cru CLK_I2S9_8CH_RX_SRC>;
- assigned-clock-parents = <&cru PLL_AUPLL>;
- dmas = <&dmac2 23>;
- dma-names = "rx";
- power-domains = <&power RK3588_PD_VO1>;
- resets = <&cru SRST_M_I2S9_8CH_RX>;
- reset-names = "rx-m";
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- qos_gpu_m0: qos@fdf35000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf35000 0x0 0x20>;
- };
-
- qos_gpu_m1: qos@fdf35200 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf35200 0x0 0x20>;
- };
-
- qos_gpu_m2: qos@fdf35400 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf35400 0x0 0x20>;
- };
-
- qos_gpu_m3: qos@fdf35600 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf35600 0x0 0x20>;
- };
-
- qos_rga3_1: qos@fdf36000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf36000 0x0 0x20>;
- };
-
- qos_sdio: qos@fdf39000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf39000 0x0 0x20>;
- };
-
- qos_sdmmc: qos@fdf3d800 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf3d800 0x0 0x20>;
- };
-
- qos_usb3_1: qos@fdf3e000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf3e000 0x0 0x20>;
- };
-
- qos_usb3_0: qos@fdf3e200 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf3e200 0x0 0x20>;
- };
-
- qos_usb2host_0: qos@fdf3e400 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf3e400 0x0 0x20>;
- };
-
- qos_usb2host_1: qos@fdf3e600 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf3e600 0x0 0x20>;
- };
-
- qos_fisheye0: qos@fdf40000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf40000 0x0 0x20>;
- };
-
- qos_fisheye1: qos@fdf40200 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf40200 0x0 0x20>;
- };
-
- qos_isp0_mro: qos@fdf40400 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf40400 0x0 0x20>;
- };
-
- qos_isp0_mwo: qos@fdf40500 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf40500 0x0 0x20>;
- };
-
- qos_vicap_m0: qos@fdf40600 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf40600 0x0 0x20>;
- };
-
- qos_vicap_m1: qos@fdf40800 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf40800 0x0 0x20>;
- };
-
- qos_isp1_mwo: qos@fdf41000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf41000 0x0 0x20>;
- };
-
- qos_isp1_mro: qos@fdf41100 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf41100 0x0 0x20>;
- };
-
- qos_rkvenc0_m0ro: qos@fdf60000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf60000 0x0 0x20>;
- };
-
- qos_rkvenc0_m1ro: qos@fdf60200 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf60200 0x0 0x20>;
- };
-
- qos_rkvenc0_m2wo: qos@fdf60400 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf60400 0x0 0x20>;
- };
-
- qos_rkvenc1_m0ro: qos@fdf61000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf61000 0x0 0x20>;
- };
-
- qos_rkvenc1_m1ro: qos@fdf61200 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf61200 0x0 0x20>;
- };
-
- qos_rkvenc1_m2wo: qos@fdf61400 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf61400 0x0 0x20>;
- };
-
- qos_rkvdec0: qos@fdf62000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf62000 0x0 0x20>;
- };
-
- qos_rkvdec1: qos@fdf63000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf63000 0x0 0x20>;
- };
-
- qos_av1: qos@fdf64000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf64000 0x0 0x20>;
- };
-
- qos_iep: qos@fdf66000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf66000 0x0 0x20>;
- };
-
- qos_jpeg_dec: qos@fdf66200 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf66200 0x0 0x20>;
- };
-
- qos_jpeg_enc0: qos@fdf66400 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf66400 0x0 0x20>;
- };
-
- qos_jpeg_enc1: qos@fdf66600 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf66600 0x0 0x20>;
- };
-
- qos_jpeg_enc2: qos@fdf66800 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf66800 0x0 0x20>;
- };
-
- qos_jpeg_enc3: qos@fdf66a00 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf66a00 0x0 0x20>;
- };
-
- qos_rga2_mro: qos@fdf66c00 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf66c00 0x0 0x20>;
- };
-
- qos_rga2_mwo: qos@fdf66e00 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf66e00 0x0 0x20>;
- };
-
- qos_rga3_0: qos@fdf67000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf67000 0x0 0x20>;
- };
-
- qos_vdpu: qos@fdf67200 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf67200 0x0 0x20>;
- };
-
- qos_npu1: qos@fdf70000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf70000 0x0 0x20>;
- };
-
- qos_npu2: qos@fdf71000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf71000 0x0 0x20>;
- };
-
- qos_npu0_mwr: qos@fdf72000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf72000 0x0 0x20>;
- };
-
- qos_npu0_mro: qos@fdf72200 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf72200 0x0 0x20>;
- };
-
- qos_mcu_npu: qos@fdf72400 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf72400 0x0 0x20>;
- };
-
- qos_hdcp0: qos@fdf80000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf80000 0x0 0x20>;
- };
-
- qos_hdcp1: qos@fdf81000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf81000 0x0 0x20>;
- };
-
- qos_hdmirx: qos@fdf81200 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf81200 0x0 0x20>;
- };
-
- qos_vop_m0: qos@fdf82000 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf82000 0x0 0x20>;
- };
-
- qos_vop_m1: qos@fdf82200 {
- compatible = "rockchip,rk3588-qos", "syscon";
- reg = <0x0 0xfdf82200 0x0 0x20>;
- };
-
- dfi: dfi@fe060000 {
- reg = <0x00 0xfe060000 0x00 0x10000>;
- compatible = "rockchip,rk3588-dfi";
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
- rockchip,pmu = <&pmu1grf>;
- };
-
- pcie2x1l1: pcie@fe180000 {
- compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
- bus-range = <0x30 0x3f>;
- clocks = <&cru ACLK_PCIE_1L1_MSTR>, <&cru ACLK_PCIE_1L1_SLV>,
- <&cru ACLK_PCIE_1L1_DBI>, <&cru PCLK_PCIE_1L1>,
- <&cru CLK_PCIE_AUX3>, <&cru CLK_PCIE1L1_PIPE>;
- clock-names = "aclk_mst", "aclk_slv",
- "aclk_dbi", "pclk",
- "aux", "pipe";
- device_type = "pci";
- interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "sys", "pmc", "msg", "legacy", "err";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie2x1l1_intc 0>,
- <0 0 0 2 &pcie2x1l1_intc 1>,
- <0 0 0 3 &pcie2x1l1_intc 2>,
- <0 0 0 4 &pcie2x1l1_intc 3>;
- linux,pci-domain = <3>;
- max-link-speed = <2>;
- msi-map = <0x3000 &its0 0x3000 0x1000>;
- num-lanes = <1>;
- phys = <&combphy2_psu PHY_TYPE_PCIE>;
- phy-names = "pcie-phy";
- power-domains = <&power RK3588_PD_PCIE>;
- ranges = <0x01000000 0x0 0xf3100000 0x0 0xf3100000 0x0 0x00100000>,
- <0x02000000 0x0 0xf3200000 0x0 0xf3200000 0x0 0x00e00000>,
- <0x03000000 0x0 0x40000000 0x9 0xc0000000 0x0 0x40000000>;
- reg = <0xa 0x40c00000 0x0 0x00400000>,
- <0x0 0xfe180000 0x0 0x00010000>,
- <0x0 0xf3000000 0x0 0x00100000>;
- reg-names = "dbi", "apb", "config";
- resets = <&cru SRST_PCIE3_POWER_UP>, <&cru SRST_P_PCIE3>;
- reset-names = "pwr", "pipe";
- #address-cells = <3>;
- #size-cells = <2>;
- status = "disabled";
-
- pcie2x1l1_intc: legacy-interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 245 IRQ_TYPE_EDGE_RISING 0>;
- };
- };
-
- pcie2x1l2: pcie@fe190000 {
- compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
- bus-range = <0x40 0x4f>;
- clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>,
- <&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>,
- <&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>;
- clock-names = "aclk_mst", "aclk_slv",
- "aclk_dbi", "pclk",
- "aux", "pipe";
- device_type = "pci";
- interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "sys", "pmc", "msg", "legacy", "err";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>,
- <0 0 0 2 &pcie2x1l2_intc 1>,
- <0 0 0 3 &pcie2x1l2_intc 2>,
- <0 0 0 4 &pcie2x1l2_intc 3>;
- linux,pci-domain = <4>;
- max-link-speed = <2>;
- msi-map = <0x4000 &its0 0x4000 0x1000>;
- num-lanes = <1>;
- phys = <&combphy0_ps PHY_TYPE_PCIE>;
- phy-names = "pcie-phy";
- power-domains = <&power RK3588_PD_PCIE>;
- ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
- <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>,
- <0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>;
- reg = <0xa 0x41000000 0x0 0x00400000>,
- <0x0 0xfe190000 0x0 0x00010000>,
- <0x0 0xf4000000 0x0 0x00100000>;
- reg-names = "dbi", "apb", "config";
- resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>;
- reset-names = "pwr", "pipe";
- #address-cells = <3>;
- #size-cells = <2>;
- status = "disabled";
-
- pcie2x1l2_intc: legacy-interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING 0>;
- };
- };
-
- gmac1: ethernet@fe1c0000 {
- compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
- reg = <0x0 0xfe1c0000 0x0 0x10000>;
- interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "macirq", "eth_wake_irq";
- clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
- <&cru PCLK_GMAC1>, <&cru ACLK_GMAC1>,
- <&cru CLK_GMAC1_PTP_REF>;
- clock-names = "stmmaceth", "clk_mac_ref",
- "pclk_mac", "aclk_mac",
- "ptp_ref";
- power-domains = <&power RK3588_PD_GMAC>;
- resets = <&cru SRST_A_GMAC1>;
- reset-names = "stmmaceth";
- rockchip,grf = <&sys_grf>;
- rockchip,php-grf = <&php_grf>;
- snps,axi-config = <&gmac1_stmmac_axi_setup>;
- snps,mixed-burst;
- snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
- snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
- snps,tso;
- status = "disabled";
-
- mdio1: mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <0x1>;
- #size-cells = <0x0>;
- };
-
- gmac1_stmmac_axi_setup: stmmac-axi-config {
- snps,blen = <0 0 0 0 16 8 4>;
- snps,wr_osr_lmt = <4>;
- snps,rd_osr_lmt = <8>;
- };
-
- gmac1_mtl_rx_setup: rx-queues-config {
- snps,rx-queues-to-use = <2>;
- queue0 {};
- queue1 {};
- };
-
- gmac1_mtl_tx_setup: tx-queues-config {
- snps,tx-queues-to-use = <2>;
- queue0 {};
- queue1 {};
- };
- };
-
- sata0: sata@fe210000 {
- compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
- reg = <0 0xfe210000 0 0x1000>;
- interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
- <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
- <&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
- clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
- ports-implemented = <0x1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata-port@0 {
- reg = <0>;
- hba-port-cap = <HBA_PORT_FBSCP>;
- phys = <&combphy0_ps PHY_TYPE_SATA>;
- phy-names = "sata-phy";
- snps,rx-ts-max = <32>;
- snps,tx-ts-max = <32>;
- };
- };
-
- sata2: sata@fe230000 {
- compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
- reg = <0 0xfe230000 0 0x1000>;
- interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>,
- <&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>,
- <&cru CLK_PIPEPHY2_PIPE_ASIC_G>;
- clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
- ports-implemented = <0x1>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- sata-port@0 {
- reg = <0>;
- hba-port-cap = <HBA_PORT_FBSCP>;
- phys = <&combphy2_psu PHY_TYPE_SATA>;
- phy-names = "sata-phy";
- snps,rx-ts-max = <32>;
- snps,tx-ts-max = <32>;
- };
- };
-
- sfc: spi@fe2b0000 {
- compatible = "rockchip,sfc";
- reg = <0x0 0xfe2b0000 0x0 0x4000>;
- interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
- clock-names = "clk_sfc", "hclk_sfc";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- sdmmc: mmc@fe2c0000 {
- compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xfe2c0000 0x0 0x4000>;
- interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&scmi_clk SCMI_HCLK_SD>, <&scmi_clk SCMI_CCLK_SD>,
- <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- fifo-depth = <0x100>;
- max-frequency = <200000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
- power-domains = <&power RK3588_PD_SDMMC>;
- status = "disabled";
- };
-
- sdio: mmc@fe2d0000 {
- compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
- reg = <0x00 0xfe2d0000 0x00 0x4000>;
- interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>,
- <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- fifo-depth = <0x100>;
- max-frequency = <200000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdiom1_pins>;
- power-domains = <&power RK3588_PD_SDIO>;
- status = "disabled";
- };
-
- sdhci: mmc@fe2e0000 {
- compatible = "rockchip,rk3588-dwcmshc";
- reg = <0x0 0xfe2e0000 0x0 0x10000>;
- interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>;
- assigned-clocks = <&cru BCLK_EMMC>, <&cru TMCLK_EMMC>, <&cru CCLK_EMMC>;
- assigned-clock-rates = <200000000>, <24000000>, <200000000>;
- clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
- <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
- <&cru TMCLK_EMMC>;
- clock-names = "core", "bus", "axi", "block", "timer";
- max-frequency = <200000000>;
- pinctrl-0 = <&emmc_rstnout>, <&emmc_bus8>, <&emmc_clk>,
- <&emmc_cmd>, <&emmc_data_strobe>;
- pinctrl-names = "default";
- resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>,
- <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
- <&cru SRST_T_EMMC>;
- reset-names = "core", "bus", "axi", "block", "timer";
- status = "disabled";
- };
-
- i2s0_8ch: i2s@fe470000 {
- compatible = "rockchip,rk3588-i2s-tdm";
- reg = <0x0 0xfe470000 0x0 0x1000>;
- interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
- clock-names = "mclk_tx", "mclk_rx", "hclk";
- assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
- assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>;
- dmas = <&dmac0 0>, <&dmac0 1>;
- dma-names = "tx", "rx";
- power-domains = <&power RK3588_PD_AUDIO>;
- resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
- reset-names = "tx-m", "rx-m";
- rockchip,trcm-sync-tx-only;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_lrck
- &i2s0_sclk
- &i2s0_sdi0
- &i2s0_sdi1
- &i2s0_sdi2
- &i2s0_sdi3
- &i2s0_sdo0
- &i2s0_sdo1
- &i2s0_sdo2
- &i2s0_sdo3>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s1_8ch: i2s@fe480000 {
- compatible = "rockchip,rk3588-i2s-tdm";
- reg = <0x0 0xfe480000 0x0 0x1000>;
- interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>;
- clock-names = "mclk_tx", "mclk_rx", "hclk";
- dmas = <&dmac0 2>, <&dmac0 3>;
- dma-names = "tx", "rx";
- resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
- reset-names = "tx-m", "rx-m";
- rockchip,trcm-sync-tx-only;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s1m0_lrck
- &i2s1m0_sclk
- &i2s1m0_sdi0
- &i2s1m0_sdi1
- &i2s1m0_sdi2
- &i2s1m0_sdi3
- &i2s1m0_sdo0
- &i2s1m0_sdo1
- &i2s1m0_sdo2
- &i2s1m0_sdo3>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s2_2ch: i2s@fe490000 {
- compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s";
- reg = <0x0 0xfe490000 0x0 0x1000>;
- interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>;
- clock-names = "i2s_clk", "i2s_hclk";
- assigned-clocks = <&cru CLK_I2S2_2CH_SRC>;
- assigned-clock-parents = <&cru PLL_AUPLL>;
- dmas = <&dmac1 0>, <&dmac1 1>;
- dma-names = "tx", "rx";
- power-domains = <&power RK3588_PD_AUDIO>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s2m1_lrck
- &i2s2m1_sclk
- &i2s2m1_sdi
- &i2s2m1_sdo>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s3_2ch: i2s@fe4a0000 {
- compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s";
- reg = <0x0 0xfe4a0000 0x0 0x1000>;
- interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>;
- clock-names = "i2s_clk", "i2s_hclk";
- assigned-clocks = <&cru CLK_I2S3_2CH_SRC>;
- assigned-clock-parents = <&cru PLL_AUPLL>;
- dmas = <&dmac1 2>, <&dmac1 3>;
- dma-names = "tx", "rx";
- power-domains = <&power RK3588_PD_AUDIO>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s3_lrck
- &i2s3_sclk
- &i2s3_sdi
- &i2s3_sdo>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- gic: interrupt-controller@fe600000 {
- compatible = "arm,gic-v3";
- reg = <0x0 0xfe600000 0 0x10000>, /* GICD */
- <0x0 0xfe680000 0 0x100000>; /* GICR */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-controller;
- mbi-alias = <0x0 0xfe610000>;
- mbi-ranges = <424 56>;
- msi-controller;
- ranges;
- #address-cells = <2>;
- #interrupt-cells = <4>;
- #size-cells = <2>;
-
- its0: msi-controller@fe640000 {
- compatible = "arm,gic-v3-its";
- reg = <0x0 0xfe640000 0x0 0x20000>;
- msi-controller;
- #msi-cells = <1>;
- };
-
- its1: msi-controller@fe660000 {
- compatible = "arm,gic-v3-its";
- reg = <0x0 0xfe660000 0x0 0x20000>;
- msi-controller;
- #msi-cells = <1>;
- };
-
- ppi-partitions {
- ppi_partition0: interrupt-partition-0 {
- affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
- };
-
- ppi_partition1: interrupt-partition-1 {
- affinity = <&cpu_b0 &cpu_b1 &cpu_b2 &cpu_b3>;
- };
- };
- };
-
- dmac0: dma-controller@fea10000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xfea10000 0x0 0x4000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH 0>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
-
- dmac1: dma-controller@fea30000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xfea30000 0x0 0x4000>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH 0>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
-
- i2c1: i2c@fea90000 {
- compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfea90000 0x0 0x1000>;
- clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-0 = <&i2c1m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c2: i2c@feaa0000 {
- compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfeaa0000 0x0 0x1000>;
- clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-0 = <&i2c2m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c3: i2c@feab0000 {
- compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfeab0000 0x0 0x1000>;
- clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-0 = <&i2c3m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c4: i2c@feac0000 {
- compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfeac0000 0x0 0x1000>;
- clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-0 = <&i2c4m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c5: i2c@fead0000 {
- compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfead0000 0x0 0x1000>;
- clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-0 = <&i2c5m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- timer0: timer@feae0000 {
- compatible = "rockchip,rk3588-timer", "rockchip,rk3288-timer";
- reg = <0x0 0xfeae0000 0x0 0x20>;
- interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_BUSTIMER0>, <&cru CLK_BUSTIMER0>;
- clock-names = "pclk", "timer";
- };
-
- wdt: watchdog@feaf0000 {
- compatible = "rockchip,rk3588-wdt", "snps,dw-wdt";
- reg = <0x0 0xfeaf0000 0x0 0x100>;
- clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>;
- clock-names = "tclk", "pclk";
- interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>;
- };
-
- spi0: spi@feb00000 {
- compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xfeb00000 0x0 0x1000>;
- interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>;
- clock-names = "spiclk", "apb_pclk";
- dmas = <&dmac0 14>, <&dmac0 15>;
- dma-names = "tx", "rx";
- num-cs = <2>;
- pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi1: spi@feb10000 {
- compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xfeb10000 0x0 0x1000>;
- interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
- clock-names = "spiclk", "apb_pclk";
- dmas = <&dmac0 16>, <&dmac0 17>;
- dma-names = "tx", "rx";
- num-cs = <2>;
- pinctrl-0 = <&spi1m1_cs0 &spi1m1_cs1 &spi1m1_pins>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi2: spi@feb20000 {
- compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xfeb20000 0x0 0x1000>;
- interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>;
- clock-names = "spiclk", "apb_pclk";
- dmas = <&dmac1 15>, <&dmac1 16>;
- dma-names = "tx", "rx";
- num-cs = <2>;
- pinctrl-0 = <&spi2m2_cs0 &spi2m2_cs1 &spi2m2_pins>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi3: spi@feb30000 {
- compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xfeb30000 0x0 0x1000>;
- interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>;
- clock-names = "spiclk", "apb_pclk";
- dmas = <&dmac1 17>, <&dmac1 18>;
- dma-names = "tx", "rx";
- num-cs = <2>;
- pinctrl-0 = <&spi3m1_cs0 &spi3m1_cs1 &spi3m1_pins>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- uart1: serial@feb40000 {
- compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfeb40000 0x0 0x100>;
- interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 8>, <&dmac0 9>;
- dma-names = "tx", "rx";
- pinctrl-0 = <&uart1m1_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart2: serial@feb50000 {
- compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfeb50000 0x0 0x100>;
- interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 10>, <&dmac0 11>;
- dma-names = "tx", "rx";
- pinctrl-0 = <&uart2m1_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart3: serial@feb60000 {
- compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfeb60000 0x0 0x100>;
- interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac0 12>, <&dmac0 13>;
- dma-names = "tx", "rx";
- pinctrl-0 = <&uart3m1_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart4: serial@feb70000 {
- compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfeb70000 0x0 0x100>;
- interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac1 9>, <&dmac1 10>;
- dma-names = "tx", "rx";
- pinctrl-0 = <&uart4m1_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart5: serial@feb80000 {
- compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfeb80000 0x0 0x100>;
- interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac1 11>, <&dmac1 12>;
- dma-names = "tx", "rx";
- pinctrl-0 = <&uart5m1_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart6: serial@feb90000 {
- compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfeb90000 0x0 0x100>;
- interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac1 13>, <&dmac1 14>;
- dma-names = "tx", "rx";
- pinctrl-0 = <&uart6m1_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart7: serial@feba0000 {
- compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfeba0000 0x0 0x100>;
- interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac2 7>, <&dmac2 8>;
- dma-names = "tx", "rx";
- pinctrl-0 = <&uart7m1_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart8: serial@febb0000 {
- compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfebb0000 0x0 0x100>;
- interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac2 9>, <&dmac2 10>;
- dma-names = "tx", "rx";
- pinctrl-0 = <&uart8m1_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- uart9: serial@febc0000 {
- compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
- reg = <0x0 0xfebc0000 0x0 0x100>;
- interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
- clock-names = "baudclk", "apb_pclk";
- dmas = <&dmac2 11>, <&dmac2 12>;
- dma-names = "tx", "rx";
- pinctrl-0 = <&uart9m1_xfer>;
- pinctrl-names = "default";
- reg-io-width = <4>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- pwm4: pwm@febd0000 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfebd0000 0x0 0x10>;
- clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm4m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm5: pwm@febd0010 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfebd0010 0x0 0x10>;
- clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm5m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm6: pwm@febd0020 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfebd0020 0x0 0x10>;
- clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm6m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm7: pwm@febd0030 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfebd0030 0x0 0x10>;
- clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm7m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm8: pwm@febe0000 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfebe0000 0x0 0x10>;
- clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm8m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm9: pwm@febe0010 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfebe0010 0x0 0x10>;
- clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm9m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm10: pwm@febe0020 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfebe0020 0x0 0x10>;
- clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm10m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm11: pwm@febe0030 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfebe0030 0x0 0x10>;
- clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm11m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm12: pwm@febf0000 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfebf0000 0x0 0x10>;
- clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm12m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm13: pwm@febf0010 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfebf0010 0x0 0x10>;
- clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm13m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm14: pwm@febf0020 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfebf0020 0x0 0x10>;
- clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm14m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm15: pwm@febf0030 {
- compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
- reg = <0x0 0xfebf0030 0x0 0x10>;
- clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
- clock-names = "pwm", "pclk";
- pinctrl-0 = <&pwm15m0_pins>;
- pinctrl-names = "default";
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- tsadc: tsadc@fec00000 {
- compatible = "rockchip,rk3588-tsadc";
- reg = <0x0 0xfec00000 0x0 0x400>;
- interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
- clock-names = "tsadc", "apb_pclk";
- assigned-clocks = <&cru CLK_TSADC>;
- assigned-clock-rates = <2000000>;
- resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>;
- reset-names = "tsadc-apb", "tsadc";
- rockchip,hw-tshut-temp = <120000>;
- rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
- pinctrl-0 = <&tsadc_gpio_func>;
- pinctrl-1 = <&tsadc_shut>;
- pinctrl-names = "gpio", "otpout";
- #thermal-sensor-cells = <1>;
- status = "disabled";
- };
-
- saradc: adc@fec10000 {
- compatible = "rockchip,rk3588-saradc";
- reg = <0x0 0xfec10000 0x0 0x10000>;
- interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>;
- #io-channel-cells = <1>;
- clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
- clock-names = "saradc", "apb_pclk";
- resets = <&cru SRST_P_SARADC>;
- reset-names = "saradc-apb";
- status = "disabled";
- };
-
- i2c6: i2c@fec80000 {
- compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfec80000 0x0 0x1000>;
- clocks = <&cru CLK_I2C6>, <&cru PCLK_I2C6>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-0 = <&i2c6m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c7: i2c@fec90000 {
- compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfec90000 0x0 0x1000>;
- clocks = <&cru CLK_I2C7>, <&cru PCLK_I2C7>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-0 = <&i2c7m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c8: i2c@feca0000 {
- compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
- reg = <0x0 0xfeca0000 0x0 0x1000>;
- clocks = <&cru CLK_I2C8>, <&cru PCLK_I2C8>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-0 = <&i2c8m0_xfer>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi4: spi@fecb0000 {
- compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xfecb0000 0x0 0x1000>;
- interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru CLK_SPI4>, <&cru PCLK_SPI4>;
- clock-names = "spiclk", "apb_pclk";
- dmas = <&dmac2 13>, <&dmac2 14>;
- dma-names = "tx", "rx";
- num-cs = <2>;
- pinctrl-0 = <&spi4m0_cs0 &spi4m0_cs1 &spi4m0_pins>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- otp: efuse@fecc0000 {
- compatible = "rockchip,rk3588-otp";
- reg = <0x0 0xfecc0000 0x0 0x400>;
- clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>,
- <&cru CLK_OTP_PHY_G>, <&cru CLK_OTPC_ARB>;
- clock-names = "otp", "apb_pclk", "phy", "arb";
- resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>,
- <&cru SRST_OTPC_ARB>;
- reset-names = "otp", "apb", "arb";
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpu_code: cpu-code@2 {
- reg = <0x02 0x2>;
- };
-
- otp_id: id@7 {
- reg = <0x07 0x10>;
- };
-
- cpub0_leakage: cpu-leakage@17 {
- reg = <0x17 0x1>;
- };
-
- cpub1_leakage: cpu-leakage@18 {
- reg = <0x18 0x1>;
- };
-
- cpul_leakage: cpu-leakage@19 {
- reg = <0x19 0x1>;
- };
-
- log_leakage: log-leakage@1a {
- reg = <0x1a 0x1>;
- };
-
- gpu_leakage: gpu-leakage@1b {
- reg = <0x1b 0x1>;
- };
-
- otp_cpu_version: cpu-version@1c {
- reg = <0x1c 0x1>;
- bits = <3 3>;
- };
-
- npu_leakage: npu-leakage@28 {
- reg = <0x28 0x1>;
- };
-
- codec_leakage: codec-leakage@29 {
- reg = <0x29 0x1>;
- };
- };
-
- dmac2: dma-controller@fed10000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xfed10000 0x0 0x4000>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH 0>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC2>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- };
-
- hdptxphy_hdmi0: phy@fed60000 {
- compatible = "rockchip,rk3588-hdptx-phy";
- reg = <0x0 0xfed60000 0x0 0x2000>;
- clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>;
- clock-names = "ref", "apb";
- #phy-cells = <0>;
- resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>,
- <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>,
- <&cru SRST_HDPTX0_LANE>, <&cru SRST_HDPTX0_ROPLL>,
- <&cru SRST_HDPTX0_LCPLL>;
- reset-names = "phy", "apb", "init", "cmn", "lane", "ropll",
- "lcpll";
- rockchip,grf = <&hdptxphy0_grf>;
- status = "disabled";
- };
-
- usbdp_phy0: phy@fed80000 {
- compatible = "rockchip,rk3588-usbdp-phy";
- reg = <0x0 0xfed80000 0x0 0x10000>;
- #phy-cells = <1>;
- clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
- <&cru CLK_USBDP_PHY0_IMMORTAL>,
- <&cru PCLK_USBDPPHY0>,
- <&u2phy0>;
- clock-names = "refclk", "immortal", "pclk", "utmi";
- resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>,
- <&cru SRST_USBDP_COMBO_PHY0_CMN>,
- <&cru SRST_USBDP_COMBO_PHY0_LANE>,
- <&cru SRST_USBDP_COMBO_PHY0_PCS>,
- <&cru SRST_P_USBDPPHY0>;
- reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
- rockchip,u2phy-grf = <&usb2phy0_grf>;
- rockchip,usb-grf = <&usb_grf>;
- rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
- rockchip,vo-grf = <&vo0_grf>;
- status = "disabled";
- };
-
- combphy0_ps: phy@fee00000 {
- compatible = "rockchip,rk3588-naneng-combphy";
- reg = <0x0 0xfee00000 0x0 0x100>;
- clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>,
- <&cru PCLK_PHP_ROOT>;
- clock-names = "ref", "apb", "pipe";
- assigned-clocks = <&cru CLK_REF_PIPE_PHY0>;
- assigned-clock-rates = <100000000>;
- #phy-cells = <1>;
- resets = <&cru SRST_REF_PIPE_PHY0>, <&cru SRST_P_PCIE2_PHY0>;
- reset-names = "phy", "apb";
- rockchip,pipe-grf = <&php_grf>;
- rockchip,pipe-phy-grf = <&pipe_phy0_grf>;
- status = "disabled";
- };
-
- combphy2_psu: phy@fee20000 {
- compatible = "rockchip,rk3588-naneng-combphy";
- reg = <0x0 0xfee20000 0x0 0x100>;
- clocks = <&cru CLK_REF_PIPE_PHY2>, <&cru PCLK_PCIE_COMBO_PIPE_PHY2>,
- <&cru PCLK_PHP_ROOT>;
- clock-names = "ref", "apb", "pipe";
- assigned-clocks = <&cru CLK_REF_PIPE_PHY2>;
- assigned-clock-rates = <100000000>;
- #phy-cells = <1>;
- resets = <&cru SRST_REF_PIPE_PHY2>, <&cru SRST_P_PCIE2_PHY2>;
- reset-names = "phy", "apb";
- rockchip,pipe-grf = <&php_grf>;
- rockchip,pipe-phy-grf = <&pipe_phy2_grf>;
- status = "disabled";
- };
-
- system_sram2: sram@ff001000 {
- compatible = "mmio-sram";
- reg = <0x0 0xff001000 0x0 0xef000>;
- ranges = <0x0 0x0 0xff001000 0xef000>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-
- pinctrl: pinctrl {
- compatible = "rockchip,rk3588-pinctrl";
- ranges;
- rockchip,grf = <&ioc>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- gpio0: gpio@fd8a0000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xfd8a0000 0x0 0x100>;
- interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 0 32>;
- interrupt-controller;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- };
-
- gpio1: gpio@fec20000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xfec20000 0x0 0x100>;
- interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 32 32>;
- interrupt-controller;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@fec30000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xfec30000 0x0 0x100>;
- interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 64 32>;
- interrupt-controller;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@fec40000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xfec40000 0x0 0x100>;
- interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 96 32>;
- interrupt-controller;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@fec50000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xfec50000 0x0 0x100>;
- interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
- gpio-controller;
- gpio-ranges = <&pinctrl 0 128 32>;
- interrupt-controller;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- };
- };
-};
-
-#include "rk3588s-pinctrl.dtsi"
+#include "rk3588-base.dtsi"
diff --git a/env/common.c b/env/common.c
index 8d47d72..6cba7f1 100644
--- a/env/common.c
+++ b/env/common.c
@@ -401,7 +401,15 @@
* Special use-case: import from default environment
* (and use \0 as a separator)
*/
- flags |= H_NOCLEAR | H_DEFAULT;
+
+ /*
+ * When vars are passed remove variables that are not in
+ * the default environment.
+ */
+ if (!nvars)
+ flags |= H_NOCLEAR;
+
+ flags |= H_DEFAULT;
return himport_r(&env_htab, default_environment,
sizeof(default_environment), '\0',
flags, 0, nvars, vars);
diff --git a/env/sf.c b/env/sf.c
index c747e17..906b85b 100644
--- a/env/sf.c
+++ b/env/sf.c
@@ -38,14 +38,24 @@
DECLARE_GLOBAL_DATA_PTR;
+__weak int spi_get_env_dev(void)
+{
+#ifdef CONFIG_ENV_SPI_BUS
+ return CONFIG_ENV_SPI_BUS;
+#else
+ return 0;
+#endif
+}
+
static int setup_flash_device(struct spi_flash **env_flash)
{
#if CONFIG_IS_ENABLED(DM_SPI_FLASH)
struct udevice *new;
int ret;
+ int dev = spi_get_env_dev();
/* speed and mode will be read from DT */
- ret = spi_flash_probe_bus_cs(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+ ret = spi_flash_probe_bus_cs(dev, CONFIG_ENV_SPI_CS,
&new);
if (ret) {
env_set_default("spi_flash_probe_bus_cs() failed", 0);
diff --git a/env/ubi.c b/env/ubi.c
index 0c3e93c..2f4ca57 100644
--- a/env/ubi.c
+++ b/env/ubi.c
@@ -53,7 +53,7 @@
if (gd->env_valid == ENV_VALID) {
puts("Writing to redundant UBI... ");
if (ubi_volume_write(CONFIG_ENV_UBI_VOLUME_REDUND,
- (void *)env_new, CONFIG_ENV_SIZE)) {
+ (void *)env_new, 0, CONFIG_ENV_SIZE)) {
printf("\n** Unable to write env to %s:%s **\n",
CONFIG_ENV_UBI_PART,
CONFIG_ENV_UBI_VOLUME_REDUND);
@@ -62,7 +62,7 @@
} else {
puts("Writing to UBI... ");
if (ubi_volume_write(CONFIG_ENV_UBI_VOLUME,
- (void *)env_new, CONFIG_ENV_SIZE)) {
+ (void *)env_new, 0, CONFIG_ENV_SIZE)) {
printf("\n** Unable to write env to %s:%s **\n",
CONFIG_ENV_UBI_PART,
CONFIG_ENV_UBI_VOLUME);
@@ -92,7 +92,7 @@
return 1;
}
- if (ubi_volume_write(CONFIG_ENV_UBI_VOLUME, (void *)env_new,
+ if (ubi_volume_write(CONFIG_ENV_UBI_VOLUME, (void *)env_new, 0,
CONFIG_ENV_SIZE)) {
printf("\n** Unable to write env to %s:%s **\n",
CONFIG_ENV_UBI_PART, CONFIG_ENV_UBI_VOLUME);
@@ -134,14 +134,14 @@
return -EIO;
}
- read1_fail = ubi_volume_read(CONFIG_ENV_UBI_VOLUME, (void *)tmp_env1,
+ read1_fail = ubi_volume_read(CONFIG_ENV_UBI_VOLUME, (void *)tmp_env1, 0,
CONFIG_ENV_SIZE);
if (read1_fail)
printf("\n** Unable to read env from %s:%s **\n",
CONFIG_ENV_UBI_PART, CONFIG_ENV_UBI_VOLUME);
read2_fail = ubi_volume_read(CONFIG_ENV_UBI_VOLUME_REDUND,
- (void *)tmp_env2, CONFIG_ENV_SIZE);
+ (void *)tmp_env2, 0, CONFIG_ENV_SIZE);
if (read2_fail)
printf("\n** Unable to read redundant env from %s:%s **\n",
CONFIG_ENV_UBI_PART, CONFIG_ENV_UBI_VOLUME_REDUND);
@@ -171,7 +171,7 @@
return -EIO;
}
- if (ubi_volume_read(CONFIG_ENV_UBI_VOLUME, buf, CONFIG_ENV_SIZE)) {
+ if (ubi_volume_read(CONFIG_ENV_UBI_VOLUME, buf, 0, CONFIG_ENV_SIZE)) {
printf("\n** Unable to read env from %s:%s **\n",
CONFIG_ENV_UBI_PART, CONFIG_ENV_UBI_VOLUME);
env_set_default(NULL, 0);
@@ -196,7 +196,7 @@
memset(env_buf, 0x0, CONFIG_ENV_SIZE);
if (ubi_volume_write(CONFIG_ENV_UBI_VOLUME,
- (void *)env_buf, CONFIG_ENV_SIZE)) {
+ (void *)env_buf, 0, CONFIG_ENV_SIZE)) {
printf("\n** Unable to erase env to %s:%s **\n",
CONFIG_ENV_UBI_PART,
CONFIG_ENV_UBI_VOLUME);
@@ -204,7 +204,7 @@
}
if (IS_ENABLED(CONFIG_SYS_REDUNDAND_ENVIRONMENT)) {
if (ubi_volume_write(ENV_UBI_VOLUME_REDUND,
- (void *)env_buf, CONFIG_ENV_SIZE)) {
+ (void *)env_buf, 0, CONFIG_ENV_SIZE)) {
printf("\n** Unable to erase env to %s:%s **\n",
CONFIG_ENV_UBI_PART,
ENV_UBI_VOLUME_REDUND);
diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c
index 52152a2..76f7102 100644
--- a/fs/ext4/ext4_common.c
+++ b/fs/ext4/ext4_common.c
@@ -2181,13 +2181,18 @@
struct ext2fs_node *diro = node;
int status;
loff_t actread;
+ size_t alloc_size;
if (!diro->inode_read) {
status = ext4fs_read_inode(diro->data, diro->ino, &diro->inode);
if (status == 0)
return NULL;
}
- symlink = zalloc(le32_to_cpu(diro->inode.size) + 1);
+
+ if (__builtin_add_overflow(le32_to_cpu(diro->inode.size), 1, &alloc_size))
+ return NULL;
+
+ symlink = zalloc(alloc_size);
if (!symlink)
return NULL;
@@ -2383,6 +2388,20 @@
fs->inodesz = 128;
fs->gdsize = 32;
} else {
+ int missing = __le32_to_cpu(data->sblock.feature_incompat) &
+ ~(EXT4_FEATURE_INCOMPAT_SUPP |
+ EXT4_FEATURE_INCOMPAT_SUPP_LAZY_RO);
+
+ if (missing) {
+ /*
+ * This code used to be relaxed about feature flags.
+ * We don't stop the mount to avoid breaking existing setups.
+ * But, incompatible features can cause serious read errors.
+ */
+ log_err("fs uses incompatible features: %08x, ignoring\n",
+ missing);
+ }
+
debug("EXT4 features COMPAT: %08x INCOMPAT: %08x RO_COMPAT: %08x\n",
__le32_to_cpu(data->sblock.feature_compatibility),
__le32_to_cpu(data->sblock.feature_incompat),
diff --git a/fs/ext4/ext4_common.h b/fs/ext4/ext4_common.h
index 84500e9..3467520 100644
--- a/fs/ext4/ext4_common.h
+++ b/fs/ext4/ext4_common.h
@@ -24,6 +24,7 @@
#include <ext4fs.h>
#include <malloc.h>
#include <asm/cache.h>
+#include <linux/compat.h>
#include <linux/errno.h>
#if defined(CONFIG_EXT4_WRITE)
#include "ext4_journal.h"
@@ -43,9 +44,7 @@
static inline void *zalloc(size_t size)
{
- void *p = memalign(ARCH_DMA_MINALIGN, size);
- memset(p, 0, size);
- return p;
+ return kzalloc(size, 0);
}
int ext4fs_read_inode(struct ext2_data *data, int ino,
diff --git a/fs/ext4/ext4_write.c b/fs/ext4/ext4_write.c
index a2dfff8..d109ed6 100644
--- a/fs/ext4/ext4_write.c
+++ b/fs/ext4/ext4_write.c
@@ -866,6 +866,7 @@
ALLOC_CACHE_ALIGN_BUFFER(char, filename, 256);
bool store_link_in_inode = false;
memset(filename, 0x00, 256);
+ int missing_feat;
if (type != FILETYPE_REG && type != FILETYPE_SYMLINK)
return -1;
@@ -879,8 +880,15 @@
return -1;
}
- if (le32_to_cpu(fs->sb->feature_ro_compat) & EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) {
- printf("Unsupported feature metadata_csum found, not writing.\n");
+ missing_feat = le32_to_cpu(fs->sb->feature_incompat) & ~EXT4_FEATURE_INCOMPAT_SUPP;
+ if (missing_feat) {
+ log_err("Unsupported features found %08x, not writing.\n", missing_feat);
+ return -1;
+ }
+
+ missing_feat = le32_to_cpu(fs->sb->feature_ro_compat) & ~EXT4_FEATURE_RO_COMPAT_SUPP;
+ if (missing_feat) {
+ log_err("Unsupported RO compat features found %08x, not writing.\n", missing_feat);
return -1;
}
diff --git a/fs/sandbox/sandboxfs.c b/fs/sandbox/sandboxfs.c
index 773b583..76f1a71 100644
--- a/fs/sandbox/sandboxfs.c
+++ b/fs/sandbox/sandboxfs.c
@@ -28,7 +28,7 @@
if (fd < 0)
return fd;
ret = os_lseek(fd, pos, OS_SEEK_SET);
- if (ret == -1) {
+ if (ret < 0) {
os_close(fd);
return ret;
}
@@ -65,14 +65,14 @@
if (fd < 0)
return fd;
ret = os_lseek(fd, pos, OS_SEEK_SET);
- if (ret == -1) {
+ if (ret < 0) {
os_close(fd);
return ret;
}
size = os_write(fd, buffer, towrite);
os_close(fd);
- if (size == -1) {
+ if (size < 0) {
ret = -1;
} else {
ret = 0;
diff --git a/fs/squashfs/sqfs.c b/fs/squashfs/sqfs.c
index 1430e67..b931401 100644
--- a/fs/squashfs/sqfs.c
+++ b/fs/squashfs/sqfs.c
@@ -24,7 +24,12 @@
#include "sqfs_filesystem.h"
#include "sqfs_utils.h"
+#define MAX_SYMLINK_NEST 8
+
static struct squashfs_ctxt ctxt;
+static int symlinknest;
+
+static int sqfs_readdir_nest(struct fs_dir_stream *fs_dirs, struct fs_dirent **dentp);
static int sqfs_disk_read(__u32 block, __u32 nr_blocks, void *buf)
{
@@ -422,8 +427,10 @@
char *resolved, *target;
u32 sz;
+ if (__builtin_add_overflow(get_unaligned_le32(&sym->symlink_size), 1, &sz))
+ return NULL;
+
- sz = get_unaligned_le32(&sym->symlink_size);
- target = malloc(sz + 1);
+ target = malloc(sz);
if (!target)
return NULL;
@@ -431,9 +438,9 @@
* There is no trailling null byte in the symlink's target path, so a
* copy is made and a '\0' is added at its end.
*/
- target[sz] = '\0';
+ target[sz - 1] = '\0';
/* Get target name (relative path) */
- strncpy(target, sym->symlink, sz);
+ strncpy(target, sym->symlink, sz - 1);
/* Relative -> absolute path conversion */
resolved = sqfs_get_abs_path(base_path, target);
@@ -472,6 +479,8 @@
/* Start by root inode */
table = sqfs_find_inode(dirs->inode_table, le32_to_cpu(sblk->inodes),
sblk->inodes, sblk->block_size);
+ if (!table)
+ return -EINVAL;
dir = (struct squashfs_dir_inode *)table;
ldir = (struct squashfs_ldir_inode *)table;
@@ -506,7 +515,7 @@
goto out;
}
- while (!sqfs_readdir(dirsp, &dent)) {
+ while (!sqfs_readdir_nest(dirsp, &dent)) {
ret = strcmp(dent->name, token_list[j]);
if (!ret)
break;
@@ -527,10 +536,17 @@
/* Get reference to inode in the inode table */
table = sqfs_find_inode(dirs->inode_table, new_inode_number,
sblk->inodes, sblk->block_size);
+ if (!table)
+ return -EINVAL;
dir = (struct squashfs_dir_inode *)table;
/* Check for symbolic link and inode type sanity */
if (get_unaligned_le16(&dir->inode_type) == SQFS_SYMLINK_TYPE) {
+ if (++symlinknest == MAX_SYMLINK_NEST) {
+ ret = -ELOOP;
+ goto out;
+ }
+
sym = (struct squashfs_symlink_inode *)table;
/* Get first j + 1 tokens */
path = sqfs_concat_tokens(token_list, j + 1);
@@ -551,8 +567,11 @@
ret = -ENOMEM;
goto out;
}
- /* Concatenate remaining tokens and symlink's target */
- res = malloc(strlen(rem) + strlen(target) + 1);
+ /*
+ * Concatenate remaining tokens and symlink's target.
+ * Allocate enough space for rem, target, '/' and '\0'.
+ */
+ res = malloc(strlen(rem) + strlen(target) + 2);
if (!res) {
ret = -ENOMEM;
goto out;
@@ -878,7 +897,7 @@
return metablks_count;
}
-int sqfs_opendir(const char *filename, struct fs_dir_stream **dirsp)
+static int sqfs_opendir_nest(const char *filename, struct fs_dir_stream **dirsp)
{
unsigned char *inode_table = NULL, *dir_table = NULL;
int j, token_count = 0, ret = 0, metablks_count;
@@ -973,8 +992,20 @@
return ret;
}
+int sqfs_opendir(const char *filename, struct fs_dir_stream **dirsp)
+{
+ symlinknest = 0;
+ return sqfs_opendir_nest(filename, dirsp);
+}
+
int sqfs_readdir(struct fs_dir_stream *fs_dirs, struct fs_dirent **dentp)
{
+ symlinknest = 0;
+ return sqfs_readdir_nest(fs_dirs, dentp);
+}
+
+static int sqfs_readdir_nest(struct fs_dir_stream *fs_dirs, struct fs_dirent **dentp)
+{
struct squashfs_super_block *sblk = ctxt.sblk;
struct squashfs_dir_stream *dirs;
struct squashfs_lreg_inode *lreg;
@@ -1023,6 +1054,8 @@
i_number = dirs->dir_header->inode_number + dirs->entry->inode_offset;
ipos = sqfs_find_inode(dirs->inode_table, i_number, sblk->inodes,
sblk->block_size);
+ if (!ipos)
+ return -SQFS_STOP_READDIR;
base = (struct squashfs_base_inode *)ipos;
@@ -1317,8 +1350,8 @@
return datablk_count;
}
-int sqfs_read(const char *filename, void *buf, loff_t offset, loff_t len,
- loff_t *actread)
+static int sqfs_read_nest(const char *filename, void *buf, loff_t offset,
+ loff_t len, loff_t *actread)
{
char *dir = NULL, *fragment_block, *datablock = NULL;
char *fragment = NULL, *file = NULL, *resolved, *data;
@@ -1348,11 +1381,11 @@
}
/*
- * sqfs_opendir will uncompress inode and directory tables, and will
+ * sqfs_opendir_nest will uncompress inode and directory tables, and will
* return a pointer to the directory that contains the requested file.
*/
sqfs_split_path(&file, &dir, filename);
- ret = sqfs_opendir(dir, &dirsp);
+ ret = sqfs_opendir_nest(dir, &dirsp);
if (ret) {
goto out;
}
@@ -1360,7 +1393,7 @@
dirs = (struct squashfs_dir_stream *)dirsp;
/* For now, only regular files are able to be loaded */
- while (!sqfs_readdir(dirsp, &dent)) {
+ while (!sqfs_readdir_nest(dirsp, &dent)) {
ret = strcmp(dent->name, file);
if (!ret)
break;
@@ -1379,6 +1412,10 @@
i_number = dirs->dir_header->inode_number + dirs->entry->inode_offset;
ipos = sqfs_find_inode(dirs->inode_table, i_number, sblk->inodes,
sblk->block_size);
+ if (!ipos) {
+ ret = -EINVAL;
+ goto out;
+ }
base = (struct squashfs_base_inode *)ipos;
switch (get_unaligned_le16(&base->inode_type)) {
@@ -1409,9 +1446,14 @@
break;
case SQFS_SYMLINK_TYPE:
case SQFS_LSYMLINK_TYPE:
+ if (++symlinknest == MAX_SYMLINK_NEST) {
+ ret = -ELOOP;
+ goto out;
+ }
+
symlink = (struct squashfs_symlink_inode *)ipos;
resolved = sqfs_resolve_symlink(symlink, filename);
- ret = sqfs_read(resolved, buf, offset, len, actread);
+ ret = sqfs_read_nest(resolved, buf, offset, len, actread);
free(resolved);
goto out;
case SQFS_BLKDEV_TYPE:
@@ -1582,7 +1624,14 @@
return ret;
}
-int sqfs_size(const char *filename, loff_t *size)
+int sqfs_read(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actread)
+{
+ symlinknest = 0;
+ return sqfs_read_nest(filename, buf, offset, len, actread);
+}
+
+static int sqfs_size_nest(const char *filename, loff_t *size)
{
struct squashfs_super_block *sblk = ctxt.sblk;
struct squashfs_symlink_inode *symlink;
@@ -1598,10 +1647,10 @@
sqfs_split_path(&file, &dir, filename);
/*
- * sqfs_opendir will uncompress inode and directory tables, and will
+ * sqfs_opendir_nest will uncompress inode and directory tables, and will
* return a pointer to the directory that contains the requested file.
*/
- ret = sqfs_opendir(dir, &dirsp);
+ ret = sqfs_opendir_nest(dir, &dirsp);
if (ret) {
ret = -EINVAL;
goto free_strings;
@@ -1609,7 +1658,7 @@
dirs = (struct squashfs_dir_stream *)dirsp;
- while (!sqfs_readdir(dirsp, &dent)) {
+ while (!sqfs_readdir_nest(dirsp, &dent)) {
ret = strcmp(dent->name, file);
if (!ret)
break;
@@ -1627,6 +1676,13 @@
i_number = dirs->dir_header->inode_number + dirs->entry->inode_offset;
ipos = sqfs_find_inode(dirs->inode_table, i_number, sblk->inodes,
sblk->block_size);
+
+ if (!ipos) {
+ *size = 0;
+ ret = -EINVAL;
+ goto free_strings;
+ }
+
free(dirs->entry);
dirs->entry = NULL;
@@ -1642,6 +1698,11 @@
break;
case SQFS_SYMLINK_TYPE:
case SQFS_LSYMLINK_TYPE:
+ if (++symlinknest == MAX_SYMLINK_NEST) {
+ *size = 0;
+ return -ELOOP;
+ }
+
symlink = (struct squashfs_symlink_inode *)ipos;
resolved = sqfs_resolve_symlink(symlink, filename);
ret = sqfs_size(resolved, size);
@@ -1681,10 +1742,11 @@
sqfs_split_path(&file, &dir, filename);
/*
- * sqfs_opendir will uncompress inode and directory tables, and will
+ * sqfs_opendir_nest will uncompress inode and directory tables, and will
* return a pointer to the directory that contains the requested file.
*/
- ret = sqfs_opendir(dir, &dirsp);
+ symlinknest = 0;
+ ret = sqfs_opendir_nest(dir, &dirsp);
if (ret) {
ret = -EINVAL;
goto free_strings;
@@ -1692,7 +1754,7 @@
dirs = (struct squashfs_dir_stream *)dirsp;
- while (!sqfs_readdir(dirsp, &dent)) {
+ while (!sqfs_readdir_nest(dirsp, &dent)) {
ret = strcmp(dent->name, file);
if (!ret)
break;
@@ -1709,6 +1771,12 @@
return ret == 0;
}
+int sqfs_size(const char *filename, loff_t *size)
+{
+ symlinknest = 0;
+ return sqfs_size_nest(filename, size);
+}
+
void sqfs_close(void)
{
sqfs_decompressor_cleanup(&ctxt);
diff --git a/fs/squashfs/sqfs_inode.c b/fs/squashfs/sqfs_inode.c
index d25cfb5..bb3ccd3 100644
--- a/fs/squashfs/sqfs_inode.c
+++ b/fs/squashfs/sqfs_inode.c
@@ -78,11 +78,16 @@
case SQFS_SYMLINK_TYPE:
case SQFS_LSYMLINK_TYPE: {
+ int size;
+
struct squashfs_symlink_inode *symlink =
(struct squashfs_symlink_inode *)inode;
- return sizeof(*symlink) +
- get_unaligned_le32(&symlink->symlink_size);
+ if (__builtin_add_overflow(sizeof(*symlink),
+ get_unaligned_le32(&symlink->symlink_size), &size))
+ return -EINVAL;
+
+ return size;
}
case SQFS_BLKDEV_TYPE:
diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c
index aa7f281e..b6e03b7 100644
--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -451,7 +451,7 @@
if (le32_to_cpu(dent->ch.len) != nlen + UBIFS_DENT_NODE_SZ + 1 ||
dent->type >= UBIFS_ITYPES_CNT ||
nlen > UBIFS_MAX_NLEN || dent->name[nlen] != 0 ||
- strnlen(dent->name, nlen) != nlen ||
+ (key_type == UBIFS_XENT_KEY && strnlen(dent->name, nlen) != nlen) ||
le64_to_cpu(dent->inum) > MAX_INUM) {
ubifs_err(c, "bad %s node", key_type == UBIFS_DENT_KEY ?
"directory entry" : "extended attribute entry");
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index d8d78a2..7718081 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1758,11 +1758,13 @@
ubifs_debugging_exit(c);
#ifdef __UBOOT__
ubi_close_volume(c->ubi);
+ c->ubi = NULL;
mutex_unlock(&c->umount_mutex);
/* Finally free U-Boot's global copy of superblock */
if (ubifs_sb != NULL) {
- free(ubifs_sb->s_fs_info);
- free(ubifs_sb);
+ kfree(ubifs_sb->s_fs_info);
+ kfree(ubifs_sb);
+ ubifs_sb = NULL;
}
#endif
}
@@ -2061,6 +2063,7 @@
#ifndef __UBOOT__
bdi_destroy(&c->bdi);
ubi_close_volume(c->ubi);
+ c->ubi = NULL;
mutex_unlock(&c->umount_mutex);
#endif
}
@@ -2321,6 +2324,7 @@
goto out_umount;
}
#else
+ ubifs_iput(root);
sb->s_root = NULL;
#endif
@@ -2340,6 +2344,7 @@
out_close:
#endif
ubi_close_volume(c->ubi);
+ c->ubi = NULL;
out:
return err;
}
diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c
index 048730d..398b076 100644
--- a/fs/ubifs/ubifs.c
+++ b/fs/ubifs/ubifs.c
@@ -319,9 +319,7 @@
}
ctime_r((time_t *)&inode->i_mtime, filetime);
printf("%9lld %24.24s ", inode->i_size, filetime);
-#ifndef __UBOOT__
ubifs_iput(inode);
-#endif
printf("%s\n", name);
@@ -557,6 +555,7 @@
/* We have some sort of symlink recursion, bail out */
if (symlink_count++ > 8) {
+ ubifs_iput(inode);
printf("Symlink recursion, aborting\n");
return 0;
}
@@ -568,6 +567,7 @@
* the leading slash */
next = name = link_name + 1;
root_inum = 1;
+ ubifs_iput(inode);
continue;
}
/* Relative to cur dir */
@@ -575,6 +575,7 @@
link_name, next == NULL ? "" : next);
memcpy(symlinkpath, buf, sizeof(buf));
next = name = symlinkpath;
+ ubifs_iput(inode);
continue;
}
@@ -583,8 +584,10 @@
*/
/* Found the node! */
- if (!next || *next == '\0')
+ if (!next || *next == '\0') {
+ ubifs_iput(inode);
return inum;
+ }
root_inum = inum;
name = next;
@@ -614,7 +617,6 @@
int ubifs_ls(const char *filename)
{
- struct ubifs_info *c = ubifs_sb->s_fs_info;
struct file *file;
struct dentry *dentry;
struct inode *dir;
@@ -622,7 +624,11 @@
unsigned long inum;
int ret = 0;
- c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READONLY);
+ if (!ubifs_is_mounted()) {
+ debug("UBIFS not mounted, use ubifsmount to mount volume first!\n");
+ return -1;
+ }
+
inum = ubifs_findfile(ubifs_sb, (char *)filename);
if (!inum) {
ret = -1;
@@ -656,30 +662,33 @@
free(dir);
out:
- ubi_close_volume(c->ubi);
return ret;
}
int ubifs_exists(const char *filename)
{
- struct ubifs_info *c = ubifs_sb->s_fs_info;
unsigned long inum;
- c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READONLY);
+ if (!ubifs_is_mounted()) {
+ debug("UBIFS not mounted, use ubifsmount to mount volume first!\n");
+ return -1;
+ }
+
inum = ubifs_findfile(ubifs_sb, (char *)filename);
- ubi_close_volume(c->ubi);
return inum != 0;
}
int ubifs_size(const char *filename, loff_t *size)
{
- struct ubifs_info *c = ubifs_sb->s_fs_info;
unsigned long inum;
struct inode *inode;
int err = 0;
- c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READONLY);
+ if (!ubifs_is_mounted()) {
+ debug("UBIFS not mounted, use ubifsmount to mount volume first!\n");
+ return -1;
+ }
inum = ubifs_findfile(ubifs_sb, (char *)filename);
if (!inum) {
@@ -698,7 +707,6 @@
ubifs_iput(inode);
out:
- ubi_close_volume(c->ubi);
return err;
}
@@ -885,6 +893,11 @@
int count;
int last_block_size = 0;
+ if (!ubifs_is_mounted()) {
+ debug("UBIFS not mounted, use ubifsmount to mount volume first!\n");
+ return -1;
+ }
+
*actread = 0;
if (offset & (PAGE_SIZE - 1)) {
@@ -893,7 +906,6 @@
return -1;
}
- c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READONLY);
/* ubifs_findfile will resolve symlinks, so we know that we get
* the real file here */
inum = ubifs_findfile(ubifs_sb, (char *)filename);
@@ -957,7 +969,6 @@
ubifs_iput(inode);
out:
- ubi_close_volume(c->ubi);
return err;
}
@@ -988,6 +999,5 @@
printf("Unmounting UBIFS volume %s!\n",
((struct ubifs_info *)(ubifs_sb->s_fs_info))->vi.name);
ubifs_umount(ubifs_sb->s_fs_info);
- ubifs_sb = NULL;
}
}
diff --git a/include/alist.h b/include/alist.h
new file mode 100644
index 0000000..586a1ef
--- /dev/null
+++ b/include/alist.h
@@ -0,0 +1,228 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Handles a contiguous list of pointers which be allocated and freed
+ *
+ * Copyright 2023 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#ifndef __ALIST_H
+#define __ALIST_H
+
+#include <stdbool.h>
+#include <linux/bitops.h>
+#include <linux/types.h>
+
+/**
+ * struct alist - object list that can be allocated and freed
+ *
+ * Holds a list of objects, each of the same size. The object is typically a
+ * C struct. The array is alloced in memory can change in size.
+ *
+ * The list rememebers the size of the list, but has a separate count of how
+ * much space is allocated, This allows it increase in size in steps as more
+ * elements are added, which is more efficient that reallocating the list every
+ * time a single item is added
+ *
+ * Two types of access are provided:
+ *
+ * alist_get...(index)
+ * gets an existing element, if its index is less that size
+ *
+ * alist_ensure(index)
+ * address an existing element, or creates a new one if not present
+ *
+ * @data: object data of size `@obj_size * @alloc`. The list can grow as
+ * needed but never shrinks
+ * @obj_size: Size of each object in bytes
+ * @count: number of objects in array
+ * @alloc: allocated length of array, to which @count can grow
+ * @flags: flags for the alist (ALISTF_...)
+ */
+struct alist {
+ void *data;
+ u16 obj_size;
+ u16 count;
+ u16 alloc;
+ u16 flags;
+};
+
+/**
+ * enum alist_flags - Flags for the alist
+ *
+ * @ALIST_FAIL: true if any allocation has failed. Once this has happened, the
+ * alist is dead and cannot grow further
+ */
+enum alist_flags {
+ ALISTF_FAIL = BIT(0),
+};
+
+/**
+ * alist_has() - Check if an index is within the list range
+ *
+ * Checks if index is within the current alist count
+ *
+ * @lst: alist to check
+ * @index: Index to check
+ * Returns: true if value, else false
+ */
+static inline bool alist_has(struct alist *lst, uint index)
+{
+ return index < lst->count;
+}
+
+/**
+ * alist_err() - Check if the alist is still valid
+ *
+ * @lst: List to check
+ * Return: false if OK, true if any previous allocation failed
+ */
+static inline bool alist_err(struct alist *lst)
+{
+ return lst->flags & ALISTF_FAIL;
+}
+
+/**
+ * alist_get_ptr() - Get the value of a pointer
+ *
+ * @lst: alist to check
+ * @index: Index to read from
+ * Returns: pointer, if present, else NULL
+ */
+const void *alist_get_ptr(const struct alist *lst, uint index);
+
+/**
+ * alist_getd() - Get the value of a pointer directly, with no checking
+ *
+ * This must only be called on indexes for which alist_has() returns true
+ *
+ * @lst: alist to check
+ * @index: Index to read from
+ * Returns: pointer value (may be NULL)
+ */
+static inline const void *alist_getd(struct alist *lst, uint index)
+{
+ return lst->data + index * lst->obj_size;
+}
+
+/** get an entry as a constant */
+#define alist_get(_lst, _index, _struct) \
+ ((const _struct *)alist_get_ptr(_lst, _index))
+
+/** get an entry which can be written to */
+#define alist_getw(_lst, _index, _struct) \
+ ((_struct *)alist_get_ptr(_lst, _index))
+
+/**
+ * alist_ensure_ptr() - Ensure an object exists at a given index
+ *
+ * This provides read/write access to an array element. If it does not exist,
+ * it is allocated, reading for the caller to store the object into
+ *
+ * Allocates a object at the given index if needed
+ *
+ * @lst: alist to check
+ * @index: Index to address
+ * Returns: pointer where struct can be read/written, or NULL if out of memory
+ */
+void *alist_ensure_ptr(struct alist *lst, uint index);
+
+/**
+ * alist_ensure() - Address a struct, the correct object type
+ *
+ * Use as:
+ * struct my_struct *ptr = alist_ensure(&lst, 4, struct my_struct);
+ */
+#define alist_ensure(_lst, _index, _struct) \
+ ((_struct *)alist_ensure_ptr(_lst, _index))
+
+/**
+ * alist_add_placeholder() - Add a new item to the end of the list
+ *
+ * @lst: alist to add to
+ * Return: Pointer to the newly added position. Note that this is not inited so
+ * the caller must copy the requested struct to the returned pointer
+ */
+void *alist_add_placeholder(struct alist *lst);
+
+/**
+ * alist_add_ptr() - Ad a new object to the list
+ *
+ * @lst: alist to add to
+ * @obj: Pointer to object to copy in
+ * Returns: pointer to where the object was copied, or NULL if out of memory
+ */
+void *alist_add_ptr(struct alist *lst, void *obj);
+
+/**
+ * alist_expand_by() - Expand a list by the given amount
+ *
+ * @lst: alist to expand
+ * @inc_by: Amount to expand by
+ * Return: true if OK, false if out of memory
+ */
+bool alist_expand_by(struct alist *lst, uint inc_by);
+
+/**
+ * alist_add() - Used to add an object type with the correct type
+ *
+ * Use as:
+ * struct my_struct obj;
+ * struct my_struct *ptr = alist_add(&lst, &obj);
+ */
+#define alist_add(_lst, _obj) \
+ ((typeof(_obj) *)alist_add_ptr(_lst, &(_obj)))
+
+/**
+ * alist_init() - Set up a new object list
+ *
+ * Sets up a list of objects, initially empty
+ *
+ * @lst: alist to set up
+ * @obj_size: Size of each element in bytes
+ * @alloc_size: Number of items to allowed to start, before reallocation is
+ * needed (0 to start with no space)
+ * Return: true if OK, false if out of memory
+ */
+bool alist_init(struct alist *lst, uint obj_size, uint alloc_size);
+
+#define alist_init_struct(_lst, _struct) \
+ alist_init(_lst, sizeof(_struct), 0)
+
+/**
+ * alist_uninit_move_ptr() - Return the allocated contents and uninit the alist
+ *
+ * This returns the alist data to the caller, so that the caller receives data
+ * that it can be sure will hang around. The caller is responsible for freeing
+ * the data.
+ *
+ * If the alist size is 0, this returns NULL
+ *
+ * The alist is uninited as part of this.
+ *
+ * The alist must be inited before this can be called.
+ *
+ * @alist: alist to uninit
+ * @countp: if non-NULL, returns the number of objects in the returned data
+ * (which is @alist->size)
+ * Return: data contents, allocated with malloc(), or NULL if the data could not
+ * be allocated, or the data size is 0
+ */
+void *alist_uninit_move_ptr(struct alist *alist, size_t *countp);
+
+/**
+ * alist_uninit_move() - Typed version of alist_uninit_move_ptr()
+ */
+#define alist_uninit_move(_lst, _countp, _struct) \
+ (_struct *)alist_uninit_move_ptr(_lst, _countp)
+
+/**
+ * alist_uninit() - Free any memory used by an alist
+ *
+ * The alist must be inited before this can be called.
+ *
+ * @alist: alist to uninit
+ */
+void alist_uninit(struct alist *alist);
+
+#endif /* __ALIST_H */
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 27aa75e..19c66e1 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -30,6 +30,7 @@
struct acpi_ctx;
struct driver_rt;
+struct upl;
typedef struct global_data gd_t;
@@ -491,6 +492,12 @@
* @dmtag_list: List of DM tags
*/
struct list_head dmtag_list;
+#if CONFIG_IS_ENABLED(UPL)
+ /**
+ * @upl: Universal Payload-handoff information
+ */
+ struct upl *upl;
+#endif
};
#ifndef DO_DEPS_ONLY
static_assert(sizeof(struct global_data) == GD_SIZE);
@@ -590,6 +597,14 @@
#define gd_malloc_ptr() 0L
#endif
+#if CONFIG_IS_ENABLED(UPL)
+#define gd_upl() gd->upl
+#define gd_set_upl(_val) gd->upl = (_val)
+#else
+#define gd_upl() NULL
+#define gd_set_upl(val)
+#endif
+
/**
* enum gd_flags - global data flags
*
@@ -701,6 +716,10 @@
* @GD_FLG_HUSH_MODERN_PARSER: Use hush 2021 parser.
*/
GD_FLG_HUSH_MODERN_PARSER = 0x2000000,
+ /**
+ * @GD_FLG_UPL: Read/write a Universal Payload (UPL) handoff
+ */
+ GD_FLG_UPL = 0x4000000,
};
#endif /* __ASSEMBLY__ */
diff --git a/include/bootstage.h b/include/bootstage.h
index f4e77b0..5779264 100644
--- a/include/bootstage.h
+++ b/include/bootstage.h
@@ -258,7 +258,7 @@
* relocation, since memory can be overwritten later.
* Return: Always returns 0, to indicate success
*/
-int bootstage_relocate(void);
+int bootstage_relocate(void *to);
/**
* Add a new bootstage record
@@ -395,7 +395,7 @@
* and won't even do that unless CONFIG_SHOW_BOOT_PROGRESS is defined
*/
-static inline int bootstage_relocate(void)
+static inline int bootstage_relocate(void *to)
{
return 0;
}
diff --git a/include/configs/amd_versal2_mini.h b/include/configs/amd_versal2_mini.h
new file mode 100644
index 0000000..97e8f67
--- /dev/null
+++ b/include/configs/amd_versal2_mini.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Configuration for AMD Versal Gen2 MINI configuration
+ *
+ * Copyright (C) 2023 - 2024, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#ifndef __CONFIG_VERSAL2_MINI_H
+#define __CONFIG_VERSAL2_MINI_H
+
+#define CFG_EXTRA_ENV_SETTINGS
+
+#include <configs/amd_versal2.h>
+
+/* Undef unneeded configs */
+#undef CFG_EXTRA_ENV_SETTINGS
+
+#endif /* __CONFIG_VERSAL2_MINI_H */
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 807c696..c327bbb 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -59,9 +59,6 @@
#define CFG_SYS_I2C_RTC_ADDR 0x51
#endif
-/* I2C */
-#define CFG_SYS_MAX_I2C_BUS 1
-
#define I2C_SOFT_DECLARATIONS
#define GPIO_I2C_SCL AT91_PIO_PORTA, 24
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index 769ece9..ed93b51 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -47,7 +47,6 @@
#endif
/* RTC */
-#define CFG_SYS_RTC_BUS_NUM 1
#define I2C_MUX_CH_RTC 0xB
/* Store environment at top of flash */
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index 0f591e3..d44ce45 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -10,8 +10,6 @@
#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4)
-#define CFG_SYS_RTC_BUS_NUM 0
-
/* Store environment at top of flash */
/*
diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h
index 5e03a96..21804fc 100644
--- a/include/configs/ls1046afrwy.h
+++ b/include/configs/ls1046afrwy.h
@@ -66,7 +66,6 @@
/* RTC */
#define CFG_SYS_I2C_RTC_ADDR 0x51 /* Channel 0 I2C bus 0*/
-#define CFG_SYS_RTC_BUS_NUM 0
/*
* Environment
diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
index 3a316e7..5b397e2 100644
--- a/include/configs/lx2160aqds.h
+++ b/include/configs/lx2160aqds.h
@@ -8,9 +8,6 @@
#include "lx2160a_common.h"
-/* RTC */
-#define CFG_SYS_RTC_BUS_NUM 0
-
/* MAC/PHY configuration */
/* Initial environment variables */
diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h
index 6404b35..e700a7b 100644
--- a/include/configs/lx2160ardb.h
+++ b/include/configs/lx2160ardb.h
@@ -8,9 +8,6 @@
#include "lx2160a_common.h"
-/* RTC */
-#define CFG_SYS_RTC_BUS_NUM 4
-
#if defined(CONFIG_FSL_MC_ENET)
#define AQR113C_PHY_ADDR1 0x0
#define AQR113C_PHY_ADDR2 0x08
diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h
index 54d7cea..2d0db47 100644
--- a/include/configs/lx2162aqds.h
+++ b/include/configs/lx2162aqds.h
@@ -10,9 +10,6 @@
/* USB */
-/* RTC */
-#define CFG_SYS_RTC_BUS_NUM 0
-
/* Initial environment variables */
#define CFG_EXTRA_ENV_SETTINGS \
EXTRA_ENV_SETTINGS \
diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h
index 9cf46b2..c245cbe 100644
--- a/include/configs/m53menlo.h
+++ b/include/configs/m53menlo.h
@@ -57,8 +57,6 @@
#define CFG_FEC_MXC_PHYADDR 0x0
#endif
-#define CFG_SYS_RTC_BUS_NUM 1 /* I2C2 */
-
/*
* RTC
*/
diff --git a/include/configs/rock-5-itx-rk3588.h b/include/configs/rock-5-itx-rk3588.h
new file mode 100644
index 0000000..bc0f9e7
--- /dev/null
+++ b/include/configs/rock-5-itx-rk3588.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2024 Heiko Stuebner <heiko@sntech.de>
+ */
+
+#ifndef __ROCK_5_ITX_RK3588_H
+#define __ROCK_5_ITX_RK3588_H
+
+#define ROCKCHIP_DEVICE_SETTINGS \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0"
+
+#include <configs/rk3588_common.h>
+
+#endif /* __ROCK_5_ITX_RK3588_H */
diff --git a/include/configs/sniper.h b/include/configs/sniper.h
index 45a3102..d0ae5e1 100644
--- a/include/configs/sniper.h
+++ b/include/configs/sniper.h
@@ -35,20 +35,6 @@
#define CFG_SYS_SDRAM_BASE 0x80000000
/*
- * I2C
- */
-
-#define CFG_I2C_MULTI_BUS
-
-/*
- * Input
- */
-
-/*
- * SPL
- */
-
-/*
* Serial
*/
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 2da76f1..ceeed17 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -26,9 +26,6 @@
#define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K
-/* I2C Configs */
-#define CFG_I2C_MULTI_BUS
-
#if !defined(CONFIG_DM_PMIC)
#define CFG_POWER_PFUZE100_I2C_ADDR 0x08
#define TQMA6_PFUZE100_I2C_BUS 2
diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h
index e06fc7f..5e21463 100644
--- a/include/configs/tqma6_wru4.h
+++ b/include/configs/tqma6_wru4.h
@@ -16,7 +16,6 @@
/* Watchdog */
/* Config on-board RTC */
-#define CFG_SYS_RTC_BUS_NUM 2
#define CFG_SYS_I2C_RTC_ADDR 0x68
/* Turn off RTC square-wave output to save battery */
diff --git a/include/dt-bindings/clock/mt7622-clk.h b/include/dt-bindings/clock/mt7622-clk.h
index 76fcaff..cdbcaef 100644
--- a/include/dt-bindings/clock/mt7622-clk.h
+++ b/include/dt-bindings/clock/mt7622-clk.h
@@ -117,46 +117,51 @@
#define CLK_TOP_I2S1_MCK_DIV_PD 104
#define CLK_TOP_I2S2_MCK_DIV_PD 105
#define CLK_TOP_I2S3_MCK_DIV_PD 106
+#define CLK_TOP_A1SYS_HP_DIV_PD 107
+#define CLK_TOP_A2SYS_HP_DIV_PD 108
/* INFRACFG */
-#define CLK_INFRA_DBGCLK_PD 0
-#define CLK_INFRA_TRNG 1
+#define CLK_INFRA_MUX1_SEL 0
+#define CLK_INFRA_DBGCLK_PD 1
#define CLK_INFRA_AUDIO_PD 2
#define CLK_INFRA_IRRX_PD 3
#define CLK_INFRA_APXGPT_PD 4
#define CLK_INFRA_PMIC_PD 5
+#define CLK_INFRA_TRNG 6
/* PERICFG */
-#define CLK_PERI_THERM_PD 0
-#define CLK_PERI_PWM1_PD 1
-#define CLK_PERI_PWM2_PD 2
-#define CLK_PERI_PWM3_PD 3
-#define CLK_PERI_PWM4_PD 4
-#define CLK_PERI_PWM5_PD 5
-#define CLK_PERI_PWM6_PD 6
-#define CLK_PERI_PWM7_PD 7
-#define CLK_PERI_PWM_PD 8
-#define CLK_PERI_AP_DMA_PD 9
-#define CLK_PERI_MSDC30_0_PD 10
-#define CLK_PERI_MSDC30_1_PD 11
-#define CLK_PERI_UART0_PD 12
-#define CLK_PERI_UART1_PD 13
-#define CLK_PERI_UART2_PD 14
-#define CLK_PERI_UART3_PD 15
-#define CLK_PERI_BTIF_PD 16
-#define CLK_PERI_I2C0_PD 17
-#define CLK_PERI_I2C1_PD 18
-#define CLK_PERI_I2C2_PD 19
-#define CLK_PERI_SPI1_PD 20
-#define CLK_PERI_AUXADC_PD 21
-#define CLK_PERI_SPI0_PD 22
-#define CLK_PERI_SNFI_PD 23
-#define CLK_PERI_NFI_PD 24
-#define CLK_PERI_NFIECC_PD 25
-#define CLK_PERI_FLASH_PD 26
-#define CLK_PERI_IRTX_PD 27
+#define CLK_PERIBUS_SEL 0
+#define CLK_PERI_THERM_PD 1
+#define CLK_PERI_PWM1_PD 2
+#define CLK_PERI_PWM2_PD 3
+#define CLK_PERI_PWM3_PD 4
+#define CLK_PERI_PWM4_PD 5
+#define CLK_PERI_PWM5_PD 6
+#define CLK_PERI_PWM6_PD 7
+#define CLK_PERI_PWM7_PD 8
+#define CLK_PERI_PWM_PD 9
+#define CLK_PERI_AP_DMA_PD 10
+#define CLK_PERI_MSDC30_0_PD 11
+#define CLK_PERI_MSDC30_1_PD 12
+#define CLK_PERI_UART0_PD 13
+#define CLK_PERI_UART1_PD 14
+#define CLK_PERI_UART2_PD 15
+#define CLK_PERI_UART3_PD 16
+#define CLK_PERI_UART4_PD 17
+#define CLK_PERI_BTIF_PD 18
+#define CLK_PERI_I2C0_PD 19
+#define CLK_PERI_I2C1_PD 20
+#define CLK_PERI_I2C2_PD 21
+#define CLK_PERI_SPI1_PD 22
+#define CLK_PERI_AUXADC_PD 23
+#define CLK_PERI_SPI0_PD 24
+#define CLK_PERI_SNFI_PD 25
+#define CLK_PERI_NFI_PD 26
+#define CLK_PERI_NFIECC_PD 27
+#define CLK_PERI_FLASH_PD 28
+#define CLK_PERI_IRTX_PD 29
/* APMIXEDSYS */
@@ -169,6 +174,7 @@
#define CLK_APMIXED_AUD2PLL 6
#define CLK_APMIXED_TRGPLL 7
#define CLK_APMIXED_SGMIPLL 8
+#define CLK_APMIXED_MAIN_CORE_EN 9
/* AUDIOSYS */
@@ -206,7 +212,7 @@
#define CLK_AUDIO_DLMCH 31
#define CLK_AUDIO_ARB1 32
#define CLK_AUDIO_AWB 33
-#define CLK_AUDIO_AWB3 34
+#define CLK_AUDIO_AWB2 34
#define CLK_AUDIO_DAI 35
#define CLK_AUDIO_MOD 36
#define CLK_AUDIO_ASRCI3 37
diff --git a/include/dt-bindings/clock/mt7623-clk.h b/include/dt-bindings/clock/mt7623-clk.h
index 71ced15..0caeb65 100644
--- a/include/dt-bindings/clock/mt7623-clk.h
+++ b/include/dt-bindings/clock/mt7623-clk.h
@@ -7,407 +7,477 @@
#define _DT_BINDINGS_CLK_MT2701_H
/* TOPCKGEN */
-#define CLK_TOP_FCLKS_OFF 0
+#define CLK_TOP_SYSPLL 1
+#define CLK_TOP_SYSPLL_D2 2
+#define CLK_TOP_SYSPLL_D3 3
+#define CLK_TOP_SYSPLL_D5 4
+#define CLK_TOP_SYSPLL_D7 5
+#define CLK_TOP_SYSPLL1_D2 6
+#define CLK_TOP_SYSPLL1_D4 7
+#define CLK_TOP_SYSPLL1_D8 8
+#define CLK_TOP_SYSPLL1_D16 9
+#define CLK_TOP_SYSPLL2_D2 10
+#define CLK_TOP_SYSPLL2_D4 11
+#define CLK_TOP_SYSPLL2_D8 12
+#define CLK_TOP_SYSPLL3_D2 13
+#define CLK_TOP_SYSPLL3_D4 14
+#define CLK_TOP_SYSPLL4_D2 15
+#define CLK_TOP_SYSPLL4_D4 16
+#define CLK_TOP_UNIVPLL 17
+#define CLK_TOP_UNIVPLL_D2 18
+#define CLK_TOP_UNIVPLL_D3 19
+#define CLK_TOP_UNIVPLL_D5 20
+#define CLK_TOP_UNIVPLL_D7 21
+#define CLK_TOP_UNIVPLL_D26 22
+#define CLK_TOP_UNIVPLL_D52 23
+#define CLK_TOP_UNIVPLL_D108 24
+#define CLK_TOP_USB_PHY48M 25
+#define CLK_TOP_UNIVPLL1_D2 26
+#define CLK_TOP_UNIVPLL1_D4 27
+#define CLK_TOP_UNIVPLL1_D8 28
+#define CLK_TOP_UNIVPLL2_D2 29
+#define CLK_TOP_UNIVPLL2_D4 30
+#define CLK_TOP_UNIVPLL2_D8 31
+#define CLK_TOP_UNIVPLL2_D16 32
+#define CLK_TOP_UNIVPLL2_D32 33
+#define CLK_TOP_UNIVPLL3_D2 34
+#define CLK_TOP_UNIVPLL3_D4 35
+#define CLK_TOP_UNIVPLL3_D8 36
+#define CLK_TOP_MSDCPLL 37
+#define CLK_TOP_MSDCPLL_D2 38
+#define CLK_TOP_MSDCPLL_D4 39
+#define CLK_TOP_MSDCPLL_D8 40
+#define CLK_TOP_MMPLL 41
+#define CLK_TOP_MMPLL_D2 42
+#define CLK_TOP_DMPLL 43
+#define CLK_TOP_DMPLL_D2 44
+#define CLK_TOP_DMPLL_D4 45
+#define CLK_TOP_DMPLL_X2 46
+#define CLK_TOP_TVDPLL 47
+#define CLK_TOP_TVDPLL_D2 48
+#define CLK_TOP_TVDPLL_D4 49
+#define CLK_TOP_TVD2PLL 50
+#define CLK_TOP_TVD2PLL_D2 51
+#define CLK_TOP_HADDS2PLL_98M 52
+#define CLK_TOP_HADDS2PLL_294M 53
+#define CLK_TOP_HADDS2_FB 54
+#define CLK_TOP_MIPIPLL_D2 55
+#define CLK_TOP_MIPIPLL_D4 56
+#define CLK_TOP_HDMIPLL 57
+#define CLK_TOP_HDMIPLL_D2 58
+#define CLK_TOP_HDMIPLL_D3 59
+#define CLK_TOP_HDMI_SCL_RX 60
+#define CLK_TOP_HDMI_0_PIX340M 61
+#define CLK_TOP_HDMI_0_DEEP340M 62
+#define CLK_TOP_HDMI_0_PLL340M 63
+#define CLK_TOP_AUD1PLL_98M 64
+#define CLK_TOP_AUD2PLL_90M 65
+#define CLK_TOP_AUDPLL 66
+#define CLK_TOP_AUDPLL_D4 67
+#define CLK_TOP_AUDPLL_D8 68
+#define CLK_TOP_AUDPLL_D16 69
+#define CLK_TOP_AUDPLL_D24 70
+#define CLK_TOP_ETHPLL_500M 71
+#define CLK_TOP_VDECPLL 72
+#define CLK_TOP_VENCPLL 73
+#define CLK_TOP_MIPIPLL 74
+#define CLK_TOP_ARMPLL_1P3G 75
-#define CLK_TOP_DPI 0
-#define CLK_TOP_DMPLL 1
-#define CLK_TOP_VENCPLL 2
-#define CLK_TOP_HDMI_0_PIX340M 3
-#define CLK_TOP_HDMI_0_DEEP340M 4
-#define CLK_TOP_HDMI_0_PLL340M 5
-#define CLK_TOP_HADDS2_FB 6
-#define CLK_TOP_WBG_DIG_416M 7
-#define CLK_TOP_DSI0_LNTC_DSI 8
-#define CLK_TOP_HDMI_SCL_RX 9
-#define CLK_TOP_32K_EXTERNAL 10
-#define CLK_TOP_HDMITX_CLKDIG_CTS 11
-#define CLK_TOP_AUD_EXT1 12
-#define CLK_TOP_AUD_EXT2 13
-#define CLK_TOP_NFI1X_PAD 14
+#define CLK_TOP_MM_SEL 76
+#define CLK_TOP_DDRPHYCFG_SEL 77
+#define CLK_TOP_MEM_SEL 78
+#define CLK_TOP_AXI_SEL 79
+#define CLK_TOP_CAMTG_SEL 80
+#define CLK_TOP_MFG_SEL 81
+#define CLK_TOP_VDEC_SEL 82
+#define CLK_TOP_PWM_SEL 83
+#define CLK_TOP_MSDC30_0_SEL 84
+#define CLK_TOP_USB20_SEL 85
+#define CLK_TOP_SPI0_SEL 86
+#define CLK_TOP_UART_SEL 87
+#define CLK_TOP_AUDINTBUS_SEL 88
+#define CLK_TOP_AUDIO_SEL 89
+#define CLK_TOP_MSDC30_2_SEL 90
+#define CLK_TOP_MSDC30_1_SEL 91
+#define CLK_TOP_DPI1_SEL 92
+#define CLK_TOP_DPI0_SEL 93
+#define CLK_TOP_SCP_SEL 94
+#define CLK_TOP_PMICSPI_SEL 95
+#define CLK_TOP_APLL_SEL 96
+#define CLK_TOP_HDMI_SEL 97
+#define CLK_TOP_TVE_SEL 98
+#define CLK_TOP_EMMC_HCLK_SEL 99
+#define CLK_TOP_NFI2X_SEL 100
+#define CLK_TOP_RTC_SEL 101
+#define CLK_TOP_OSD_SEL 102
+#define CLK_TOP_NR_SEL 103
+#define CLK_TOP_DI_SEL 104
+#define CLK_TOP_FLASH_SEL 105
+#define CLK_TOP_ASM_M_SEL 106
+#define CLK_TOP_ASM_I_SEL 107
+#define CLK_TOP_INTDIR_SEL 108
+#define CLK_TOP_HDMIRX_BIST_SEL 109
+#define CLK_TOP_ETHIF_SEL 110
+#define CLK_TOP_MS_CARD_SEL 111
+#define CLK_TOP_ASM_H_SEL 112
+#define CLK_TOP_SPI1_SEL 113
+#define CLK_TOP_CMSYS_SEL 114
+#define CLK_TOP_MSDC30_3_SEL 115
+#define CLK_TOP_HDMIRX26_24_SEL 116
+#define CLK_TOP_AUD2DVD_SEL 117
+#define CLK_TOP_8BDAC_SEL 118
+#define CLK_TOP_SPI2_SEL 119
+#define CLK_TOP_AUD_MUX1_SEL 120
+#define CLK_TOP_AUD_MUX2_SEL 121
+#define CLK_TOP_AUDPLL_MUX_SEL 122
+#define CLK_TOP_AUD_K1_SRC_SEL 123
+#define CLK_TOP_AUD_K2_SRC_SEL 124
+#define CLK_TOP_AUD_K3_SRC_SEL 125
+#define CLK_TOP_AUD_K4_SRC_SEL 126
+#define CLK_TOP_AUD_K5_SRC_SEL 127
+#define CLK_TOP_AUD_K6_SRC_SEL 128
+#define CLK_TOP_PADMCLK_SEL 129
+#define CLK_TOP_AUD_EXTCK1_DIV 130
+#define CLK_TOP_AUD_EXTCK2_DIV 131
+#define CLK_TOP_AUD_MUX1_DIV 132
+#define CLK_TOP_AUD_MUX2_DIV 133
+#define CLK_TOP_AUD_K1_SRC_DIV 134
+#define CLK_TOP_AUD_K2_SRC_DIV 135
+#define CLK_TOP_AUD_K3_SRC_DIV 136
+#define CLK_TOP_AUD_K4_SRC_DIV 137
+#define CLK_TOP_AUD_K5_SRC_DIV 138
+#define CLK_TOP_AUD_K6_SRC_DIV 139
+#define CLK_TOP_AUD_I2S1_MCLK 140
+#define CLK_TOP_AUD_I2S2_MCLK 141
+#define CLK_TOP_AUD_I2S3_MCLK 142
+#define CLK_TOP_AUD_I2S4_MCLK 143
+#define CLK_TOP_AUD_I2S5_MCLK 144
+#define CLK_TOP_AUD_I2S6_MCLK 145
+#define CLK_TOP_AUD_48K_TIMING 146
+#define CLK_TOP_AUD_44K_TIMING 147
-#define CLK_TOP_SYSPLL 15
-#define CLK_TOP_SYSPLL_D2 16
-#define CLK_TOP_SYSPLL_D3 17
-#define CLK_TOP_SYSPLL_D5 18
-#define CLK_TOP_SYSPLL_D7 19
-#define CLK_TOP_SYSPLL1_D2 20
-#define CLK_TOP_SYSPLL1_D4 21
-#define CLK_TOP_SYSPLL1_D8 22
-#define CLK_TOP_SYSPLL1_D16 23
-#define CLK_TOP_SYSPLL2_D2 24
-#define CLK_TOP_SYSPLL2_D4 25
-#define CLK_TOP_SYSPLL2_D8 26
-#define CLK_TOP_SYSPLL3_D2 27
-#define CLK_TOP_SYSPLL3_D4 28
-#define CLK_TOP_SYSPLL4_D2 29
-#define CLK_TOP_SYSPLL4_D4 30
-#define CLK_TOP_UNIVPLL 31
-#define CLK_TOP_UNIVPLL_D2 32
-#define CLK_TOP_UNIVPLL_D3 33
-#define CLK_TOP_UNIVPLL_D5 34
-#define CLK_TOP_UNIVPLL_D7 35
-#define CLK_TOP_UNIVPLL_D26 36
-#define CLK_TOP_UNIVPLL_D52 37
-#define CLK_TOP_UNIVPLL_D108 38
-#define CLK_TOP_USB_PHY48M 39
-#define CLK_TOP_UNIVPLL1_D2 40
-#define CLK_TOP_UNIVPLL1_D4 41
-#define CLK_TOP_UNIVPLL1_D8 42
-#define CLK_TOP_UNIVPLL2_D2 43
-#define CLK_TOP_UNIVPLL2_D4 44
-#define CLK_TOP_UNIVPLL2_D8 45
-#define CLK_TOP_UNIVPLL2_D16 46
-#define CLK_TOP_UNIVPLL2_D32 47
-#define CLK_TOP_UNIVPLL3_D2 48
-#define CLK_TOP_UNIVPLL3_D4 49
-#define CLK_TOP_UNIVPLL3_D8 50
-#define CLK_TOP_MSDCPLL 51
-#define CLK_TOP_MSDCPLL_D2 52
-#define CLK_TOP_MSDCPLL_D4 53
-#define CLK_TOP_MSDCPLL_D8 54
-#define CLK_TOP_MMPLL 55
-#define CLK_TOP_MMPLL_D2 56
-#define CLK_TOP_DMPLL_D2 57
-#define CLK_TOP_DMPLL_D4 58
-#define CLK_TOP_DMPLL_X2 59
-#define CLK_TOP_TVDPLL 60
-#define CLK_TOP_TVDPLL_D2 61
-#define CLK_TOP_TVDPLL_D4 62
-#define CLK_TOP_VDECPLL 63
-#define CLK_TOP_TVD2PLL 64
-#define CLK_TOP_TVD2PLL_D2 65
-#define CLK_TOP_MIPIPLL 66
-#define CLK_TOP_MIPIPLL_D2 67
-#define CLK_TOP_MIPIPLL_D4 68
-#define CLK_TOP_HDMIPLL 69
-#define CLK_TOP_HDMIPLL_D2 70
-#define CLK_TOP_HDMIPLL_D3 71
-#define CLK_TOP_ARMPLL_1P3G 72
-#define CLK_TOP_AUDPLL 73
-#define CLK_TOP_AUDPLL_D4 74
-#define CLK_TOP_AUDPLL_D8 75
-#define CLK_TOP_AUDPLL_D16 76
-#define CLK_TOP_AUDPLL_D24 77
-#define CLK_TOP_AUD1PLL_98M 78
-#define CLK_TOP_AUD2PLL_90M 79
-#define CLK_TOP_HADDS2PLL_98M 80
-#define CLK_TOP_HADDS2PLL_294M 81
-#define CLK_TOP_ETHPLL_500M 82
-#define CLK_TOP_CLK26M_D8 83
-#define CLK_TOP_32K_INTERNAL 84
-#define CLK_TOP_AXISEL_D4 85
-#define CLK_TOP_8BDAC 86
-
-#define CLK_TOP_AXI_SEL 87
-#define CLK_TOP_MEM_SEL 88
-#define CLK_TOP_DDRPHYCFG_SEL 89
-#define CLK_TOP_MM_SEL 90
-#define CLK_TOP_PWM_SEL 91
-#define CLK_TOP_VDEC_SEL 92
-#define CLK_TOP_MFG_SEL 93
-#define CLK_TOP_CAMTG_SEL 94
-#define CLK_TOP_UART_SEL 95
-#define CLK_TOP_SPI0_SEL 96
-#define CLK_TOP_USB20_SEL 97
-#define CLK_TOP_MSDC30_0_SEL 98
-#define CLK_TOP_MSDC30_1_SEL 99
-#define CLK_TOP_MSDC30_2_SEL 100
-#define CLK_TOP_AUDIO_SEL 101
-#define CLK_TOP_AUDINTBUS_SEL 102
-#define CLK_TOP_PMICSPI_SEL 103
-#define CLK_TOP_SCP_SEL 104
-#define CLK_TOP_DPI0_SEL 105
-#define CLK_TOP_DPI1_SEL 106
-#define CLK_TOP_TVE_SEL 107
-#define CLK_TOP_HDMI_SEL 108
-#define CLK_TOP_APLL_SEL 109
-#define CLK_TOP_RTC_SEL 110
-#define CLK_TOP_NFI2X_SEL 111
-#define CLK_TOP_EMMC_HCLK_SEL 112
-#define CLK_TOP_FLASH_SEL 113
-#define CLK_TOP_DI_SEL 114
-#define CLK_TOP_NR_SEL 115
-#define CLK_TOP_OSD_SEL 116
-#define CLK_TOP_HDMIRX_BIST_SEL 117
-#define CLK_TOP_INTDIR_SEL 118
-#define CLK_TOP_ASM_I_SEL 119
-#define CLK_TOP_ASM_M_SEL 120
-#define CLK_TOP_ASM_H_SEL 121
-#define CLK_TOP_MS_CARD_SEL 122
-#define CLK_TOP_ETHIF_SEL 123
-#define CLK_TOP_HDMIRX26_24_SEL 124
-#define CLK_TOP_MSDC30_3_SEL 125
-#define CLK_TOP_CMSYS_SEL 126
-#define CLK_TOP_SPI1_SEL 127
-#define CLK_TOP_SPI2_SEL 128
-#define CLK_TOP_8BDAC_SEL 129
-#define CLK_TOP_AUD2DVD_SEL 130
-#define CLK_TOP_PADMCLK_SEL 131
-#define CLK_TOP_AUD_MUX1_SEL 132
-#define CLK_TOP_AUD_MUX2_SEL 133
-#define CLK_TOP_AUDPLL_MUX_SEL 134
-#define CLK_TOP_AUD_K1_SRC_SEL 135
-#define CLK_TOP_AUD_K2_SRC_SEL 136
-#define CLK_TOP_AUD_K3_SRC_SEL 137
-#define CLK_TOP_AUD_K4_SRC_SEL 138
-#define CLK_TOP_AUD_K5_SRC_SEL 139
-#define CLK_TOP_AUD_K6_SRC_SEL 140
-
-#define CLK_TOP_AUD_EXTCK1_DIV 141
-#define CLK_TOP_AUD_EXTCK2_DIV 142
-#define CLK_TOP_AUD_MUX1_DIV 143
-#define CLK_TOP_AUD_MUX2_DIV 144
-#define CLK_TOP_AUD_K1_SRC_DIV 145
-#define CLK_TOP_AUD_K2_SRC_DIV 146
-#define CLK_TOP_AUD_K3_SRC_DIV 147
-#define CLK_TOP_AUD_K4_SRC_DIV 148
-#define CLK_TOP_AUD_K5_SRC_DIV 149
-#define CLK_TOP_AUD_K6_SRC_DIV 150
-#define CLK_TOP_AUD_48K_TIMING 151
-#define CLK_TOP_AUD_44K_TIMING 152
-#define CLK_TOP_AUD_I2S1_MCLK 153
-#define CLK_TOP_AUD_I2S2_MCLK 154
-#define CLK_TOP_AUD_I2S3_MCLK 155
-#define CLK_TOP_AUD_I2S4_MCLK 156
-#define CLK_TOP_AUD_I2S5_MCLK 157
-#define CLK_TOP_AUD_I2S6_MCLK 158
+#define CLK_TOP_32K_INTERNAL 148
+#define CLK_TOP_32K_EXTERNAL 149
+#define CLK_TOP_CLK26M_D8 150
+#define CLK_TOP_8BDAC 151
+#define CLK_TOP_WBG_DIG_416M 152
+#define CLK_TOP_DPI 153
+#define CLK_TOP_DSI0_LNTC_DSI 154
+#define CLK_TOP_AUD_EXT1 155
+#define CLK_TOP_AUD_EXT2 156
+#define CLK_TOP_NFI1X_PAD 157
+#define CLK_TOP_AXISEL_D4 158
#define CLK_TOP_NR 159
/* APMIXEDSYS */
-#define CLK_APMIXED_ARMPLL 0
-#define CLK_APMIXED_MAINPLL 1
-#define CLK_APMIXED_UNIVPLL 2
-#define CLK_APMIXED_MMPLL 3
-#define CLK_APMIXED_MSDCPLL 4
-#define CLK_APMIXED_TVDPLL 5
-#define CLK_APMIXED_AUD1PLL 6
-#define CLK_APMIXED_TRGPLL 7
-#define CLK_APMIXED_ETHPLL 8
-#define CLK_APMIXED_VDECPLL 9
-#define CLK_APMIXED_HADDS2PLL 10
-#define CLK_APMIXED_AUD2PLL 11
-#define CLK_APMIXED_TVD2PLL 12
-#define CLK_APMIXED_NR 13
+
+#define CLK_APMIXED_ARMPLL 1
+#define CLK_APMIXED_MAINPLL 2
+#define CLK_APMIXED_UNIVPLL 3
+#define CLK_APMIXED_MMPLL 4
+#define CLK_APMIXED_MSDCPLL 5
+#define CLK_APMIXED_TVDPLL 6
+#define CLK_APMIXED_AUD1PLL 7
+#define CLK_APMIXED_TRGPLL 8
+#define CLK_APMIXED_ETHPLL 9
+#define CLK_APMIXED_VDECPLL 10
+#define CLK_APMIXED_HADDS2PLL 11
+#define CLK_APMIXED_AUD2PLL 12
+#define CLK_APMIXED_TVD2PLL 13
+#define CLK_APMIXED_HDMI_REF 14
+#define CLK_APMIXED_NR 15
+
+/* DDRPHY */
+
+#define CLK_DDRPHY_VENCPLL 1
+#define CLK_DDRPHY_NR 2
/* INFRACFG */
-#define CLK_INFRA_DBG 0
-#define CLK_INFRA_SMI 1
-#define CLK_INFRA_QAXI_CM4 2
-#define CLK_INFRA_AUD_SPLIN_B 3
-#define CLK_INFRA_AUDIO 4
-#define CLK_INFRA_EFUSE 5
-#define CLK_INFRA_L2C_SRAM 6
-#define CLK_INFRA_M4U 7
-#define CLK_INFRA_CONNMCU 8
-#define CLK_INFRA_TRNG 9
-#define CLK_INFRA_RAMBUFIF 10
-#define CLK_INFRA_CPUM 11
-#define CLK_INFRA_KP 12
-#define CLK_INFRA_CEC 13
-#define CLK_INFRA_IRRX 14
-#define CLK_INFRA_PMICSPI 15
-#define CLK_INFRA_PMICWRAP 16
-#define CLK_INFRA_DDCCI 17
-#define CLK_INFRA_CPUSEL 18
-#define CLK_INFRA_NR 19
+
+#define CLK_INFRA_DBG 1
+#define CLK_INFRA_SMI 2
+#define CLK_INFRA_QAXI_CM4 3
+#define CLK_INFRA_AUD_SPLIN_B 4
+#define CLK_INFRA_AUDIO 5
+#define CLK_INFRA_EFUSE 6
+#define CLK_INFRA_L2C_SRAM 7
+#define CLK_INFRA_M4U 8
+#define CLK_INFRA_CONNMCU 9
+#define CLK_INFRA_TRNG 10
+#define CLK_INFRA_RAMBUFIF 11
+#define CLK_INFRA_CPUM 12
+#define CLK_INFRA_KP 13
+#define CLK_INFRA_CEC 14
+#define CLK_INFRA_IRRX 15
+#define CLK_INFRA_PMICSPI 16
+#define CLK_INFRA_PMICWRAP 17
+#define CLK_INFRA_DDCCI 18
+#define CLK_INFRA_CLK_13M 19
+#define CLK_INFRA_CPUSEL 20
+#define CLK_INFRA_NR 21
/* PERICFG */
-#define CLK_PERI_NFI 0
-#define CLK_PERI_THERM 1
-#define CLK_PERI_PWM1 2
-#define CLK_PERI_PWM2 3
-#define CLK_PERI_PWM3 4
-#define CLK_PERI_PWM4 5
-#define CLK_PERI_PWM5 6
-#define CLK_PERI_PWM6 7
-#define CLK_PERI_PWM7 8
-#define CLK_PERI_PWM 9
-#define CLK_PERI_USB0 10
-#define CLK_PERI_USB1 11
-#define CLK_PERI_AP_DMA 12
-#define CLK_PERI_MSDC30_0 13
-#define CLK_PERI_MSDC30_1 14
-#define CLK_PERI_MSDC30_2 15
-#define CLK_PERI_MSDC30_3 16
-#define CLK_PERI_MSDC50_3 17
-#define CLK_PERI_NLI 18
-#define CLK_PERI_UART0 19
-#define CLK_PERI_UART1 20
-#define CLK_PERI_UART2 21
-#define CLK_PERI_UART3 22
-#define CLK_PERI_BTIF 23
-#define CLK_PERI_I2C0 24
-#define CLK_PERI_I2C1 25
-#define CLK_PERI_I2C2 26
-#define CLK_PERI_I2C3 27
-#define CLK_PERI_AUXADC 28
-#define CLK_PERI_SPI0 39
-#define CLK_PERI_ETH 30
-#define CLK_PERI_USB0_MCU 31
+
+#define CLK_PERI_NFI 1
+#define CLK_PERI_THERM 2
+#define CLK_PERI_PWM1 3
+#define CLK_PERI_PWM2 4
+#define CLK_PERI_PWM3 5
+#define CLK_PERI_PWM4 6
+#define CLK_PERI_PWM5 7
+#define CLK_PERI_PWM6 8
+#define CLK_PERI_PWM7 9
+#define CLK_PERI_PWM 10
+#define CLK_PERI_USB0 11
+#define CLK_PERI_USB1 12
+#define CLK_PERI_AP_DMA 13
+#define CLK_PERI_MSDC30_0 14
+#define CLK_PERI_MSDC30_1 15
+#define CLK_PERI_MSDC30_2 16
+#define CLK_PERI_MSDC30_3 17
+#define CLK_PERI_MSDC50_3 18
+#define CLK_PERI_NLI 19
+#define CLK_PERI_UART0 20
+#define CLK_PERI_UART1 21
+#define CLK_PERI_UART2 22
+#define CLK_PERI_UART3 23
+#define CLK_PERI_BTIF 24
+#define CLK_PERI_I2C0 25
+#define CLK_PERI_I2C1 26
+#define CLK_PERI_I2C2 27
+#define CLK_PERI_I2C3 28
+#define CLK_PERI_AUXADC 29
+#define CLK_PERI_SPI0 30
+#define CLK_PERI_ETH 31
+#define CLK_PERI_USB0_MCU 32
+
+#define CLK_PERI_USB1_MCU 33
+#define CLK_PERI_USB_SLV 34
+#define CLK_PERI_GCPU 35
+#define CLK_PERI_NFI_ECC 36
+#define CLK_PERI_NFI_PAD 37
+#define CLK_PERI_FLASH 38
+#define CLK_PERI_HOST89_INT 39
+#define CLK_PERI_HOST89_SPI 40
+#define CLK_PERI_HOST89_DVD 41
+#define CLK_PERI_SPI1 42
+#define CLK_PERI_SPI2 43
+#define CLK_PERI_FCI 44
-#define CLK_PERI_USB1_MCU 32
-#define CLK_PERI_USB_SLV 33
-#define CLK_PERI_GCPU 34
-#define CLK_PERI_NFI_ECC 35
-#define CLK_PERI_NFI_PAD 36
-#define CLK_PERI_FLASH 37
-#define CLK_PERI_HOST89_INT 38
-#define CLK_PERI_HOST89_SPI 39
-#define CLK_PERI_HOST89_DVD 40
-#define CLK_PERI_SPI1 41
-#define CLK_PERI_SPI2 42
-#define CLK_PERI_FCI 43
-#define CLK_PERI_NR 44
+#define CLK_PERI_UART0_SEL 45
+#define CLK_PERI_UART1_SEL 46
+#define CLK_PERI_UART2_SEL 47
+#define CLK_PERI_UART3_SEL 48
+#define CLK_PERI_NR 49
/* AUDIO */
-#define CLK_AUD_AFE 0
-#define CLK_AUD_LRCK_DETECT 1
-#define CLK_AUD_I2S 2
-#define CLK_AUD_APLL_TUNER 3
-#define CLK_AUD_HDMI 4
-#define CLK_AUD_SPDF 5
-#define CLK_AUD_SPDF2 6
-#define CLK_AUD_APLL 7
-#define CLK_AUD_TML 8
-#define CLK_AUD_AHB_IDLE_EXT 9
-#define CLK_AUD_AHB_IDLE_INT 10
-#define CLK_AUD_I2SIN1 11
-#define CLK_AUD_I2SIN2 12
-#define CLK_AUD_I2SIN3 13
-#define CLK_AUD_I2SIN4 14
-#define CLK_AUD_I2SIN5 15
-#define CLK_AUD_I2SIN6 16
-#define CLK_AUD_I2SO1 17
-#define CLK_AUD_I2SO2 18
-#define CLK_AUD_I2SO3 19
-#define CLK_AUD_I2SO4 20
-#define CLK_AUD_I2SO5 21
-#define CLK_AUD_I2SO6 22
-#define CLK_AUD_ASRCI1 23
-#define CLK_AUD_ASRCI2 24
-#define CLK_AUD_ASRCO1 25
-#define CLK_AUD_ASRCO2 26
-#define CLK_AUD_ASRC11 27
-#define CLK_AUD_ASRC12 28
-#define CLK_AUD_HDMIRX 29
-#define CLK_AUD_INTDIR 30
-#define CLK_AUD_A1SYS 31
-#define CLK_AUD_A2SYS 32
-#define CLK_AUD_AFE_CONN 33
-#define CLK_AUD_AFE_PCMIF 34
-#define CLK_AUD_AFE_MRGIF 35
+#define CLK_AUD_AFE 1
+#define CLK_AUD_LRCK_DETECT 2
+#define CLK_AUD_I2S 3
+#define CLK_AUD_APLL_TUNER 4
+#define CLK_AUD_HDMI 5
+#define CLK_AUD_SPDF 6
+#define CLK_AUD_SPDF2 7
+#define CLK_AUD_APLL 8
+#define CLK_AUD_TML 9
+#define CLK_AUD_AHB_IDLE_EXT 10
+#define CLK_AUD_AHB_IDLE_INT 11
-#define CLK_AUD_MMIF_UL1 36
-#define CLK_AUD_MMIF_UL2 37
-#define CLK_AUD_MMIF_UL3 38
-#define CLK_AUD_MMIF_UL4 39
-#define CLK_AUD_MMIF_UL5 40
-#define CLK_AUD_MMIF_UL6 41
-#define CLK_AUD_MMIF_DL1 42
-#define CLK_AUD_MMIF_DL2 43
-#define CLK_AUD_MMIF_DL3 44
-#define CLK_AUD_MMIF_DL4 45
-#define CLK_AUD_MMIF_DL5 46
-#define CLK_AUD_MMIF_DL6 47
-#define CLK_AUD_MMIF_DLMCH 48
-#define CLK_AUD_MMIF_ARB1 49
-#define CLK_AUD_MMIF_AWB1 50
-#define CLK_AUD_MMIF_AWB2 51
-#define CLK_AUD_MMIF_DAI 52
+#define CLK_AUD_I2SIN1 12
+#define CLK_AUD_I2SIN2 13
+#define CLK_AUD_I2SIN3 14
+#define CLK_AUD_I2SIN4 15
+#define CLK_AUD_I2SIN5 16
+#define CLK_AUD_I2SIN6 17
+#define CLK_AUD_I2SO1 18
+#define CLK_AUD_I2SO2 19
+#define CLK_AUD_I2SO3 20
+#define CLK_AUD_I2SO4 21
+#define CLK_AUD_I2SO5 22
+#define CLK_AUD_I2SO6 23
+#define CLK_AUD_ASRCI1 24
+#define CLK_AUD_ASRCI2 25
+#define CLK_AUD_ASRCO1 26
+#define CLK_AUD_ASRCO2 27
+#define CLK_AUD_ASRC11 28
+#define CLK_AUD_ASRC12 29
+#define CLK_AUD_HDMIRX 30
+#define CLK_AUD_INTDIR 31
+#define CLK_AUD_A1SYS 32
+#define CLK_AUD_A2SYS 33
+#define CLK_AUD_AFE_CONN 34
+#define CLK_AUD_AFE_PCMIF 35
+#define CLK_AUD_AFE_MRGIF 36
-#define CLK_AUD_DMIC1 53
-#define CLK_AUD_DMIC2 54
-#define CLK_AUD_ASRCI3 55
-#define CLK_AUD_ASRCI4 56
-#define CLK_AUD_ASRCI5 57
-#define CLK_AUD_ASRCI6 58
-#define CLK_AUD_ASRCO3 59
-#define CLK_AUD_ASRCO4 60
-#define CLK_AUD_ASRCO5 61
-#define CLK_AUD_ASRCO6 62
-#define CLK_AUD_MEM_ASRC1 63
-#define CLK_AUD_MEM_ASRC2 64
-#define CLK_AUD_MEM_ASRC3 65
-#define CLK_AUD_MEM_ASRC4 66
-#define CLK_AUD_MEM_ASRC5 67
-#define CLK_AUD_DSD_ENC 68
-#define CLK_AUD_ASRC_BRG 60
-#define CLK_AUD_NR 70
+#define CLK_AUD_MMIF_UL1 37
+#define CLK_AUD_MMIF_UL2 38
+#define CLK_AUD_MMIF_UL3 39
+#define CLK_AUD_MMIF_UL4 40
+#define CLK_AUD_MMIF_UL5 41
+#define CLK_AUD_MMIF_UL6 42
+#define CLK_AUD_MMIF_DL1 43
+#define CLK_AUD_MMIF_DL2 44
+#define CLK_AUD_MMIF_DL3 45
+#define CLK_AUD_MMIF_DL4 46
+#define CLK_AUD_MMIF_DL5 47
+#define CLK_AUD_MMIF_DL6 48
+#define CLK_AUD_MMIF_DLMCH 49
+#define CLK_AUD_MMIF_ARB1 50
+#define CLK_AUD_MMIF_AWB1 51
+#define CLK_AUD_MMIF_AWB2 52
+#define CLK_AUD_MMIF_DAI 53
+
+#define CLK_AUD_DMIC1 54
+#define CLK_AUD_DMIC2 55
+#define CLK_AUD_ASRCI3 56
+#define CLK_AUD_ASRCI4 57
+#define CLK_AUD_ASRCI5 58
+#define CLK_AUD_ASRCI6 59
+#define CLK_AUD_ASRCO3 60
+#define CLK_AUD_ASRCO4 61
+#define CLK_AUD_ASRCO5 62
+#define CLK_AUD_ASRCO6 63
+#define CLK_AUD_MEM_ASRC1 64
+#define CLK_AUD_MEM_ASRC2 65
+#define CLK_AUD_MEM_ASRC3 66
+#define CLK_AUD_MEM_ASRC4 67
+#define CLK_AUD_MEM_ASRC5 68
+#define CLK_AUD_DSD_ENC 69
+#define CLK_AUD_ASRC_BRG 70
+#define CLK_AUD_NR 71
/* MMSYS */
-#define CLK_MM_SMI_COMMON 0
-#define CLK_MM_SMI_LARB0 1
-#define CLK_MM_CMDQ 2
-#define CLK_MM_MUTEX 3
-#define CLK_MM_DISP_COLOR 4
-#define CLK_MM_DISP_BLS 5
-#define CLK_MM_DISP_WDMA 6
-#define CLK_MM_DISP_RDMA 7
-#define CLK_MM_DISP_OVL 8
-#define CLK_MM_MDP_TDSHP 9
-#define CLK_MM_MDP_WROT 10
-#define CLK_MM_MDP_WDMA 11
-#define CLK_MM_MDP_RSZ1 12
-#define CLK_MM_MDP_RSZ0 13
-#define CLK_MM_MDP_RDMA 14
-#define CLK_MM_MDP_BLS_26M 15
-#define CLK_MM_CAM_MDP 16
-#define CLK_MM_FAKE_ENG 17
-#define CLK_MM_MUTEX_32K 18
-#define CLK_MM_DISP_RDMA1 19
-#define CLK_MM_DISP_UFOE 20
+
+#define CLK_MM_SMI_COMMON 1
+#define CLK_MM_SMI_LARB0 2
+#define CLK_MM_CMDQ 3
+#define CLK_MM_MUTEX 4
+#define CLK_MM_DISP_COLOR 5
+#define CLK_MM_DISP_BLS 6
+#define CLK_MM_DISP_WDMA 7
+#define CLK_MM_DISP_RDMA 8
+#define CLK_MM_DISP_OVL 9
+#define CLK_MM_MDP_TDSHP 10
+#define CLK_MM_MDP_WROT 11
+#define CLK_MM_MDP_WDMA 12
+#define CLK_MM_MDP_RSZ1 13
+#define CLK_MM_MDP_RSZ0 14
+#define CLK_MM_MDP_RDMA 15
+#define CLK_MM_MDP_BLS_26M 16
+#define CLK_MM_CAM_MDP 17
+#define CLK_MM_FAKE_ENG 18
+#define CLK_MM_MUTEX_32K 19
+#define CLK_MM_DISP_RDMA1 20
+#define CLK_MM_DISP_UFOE 21
-#define CLK_MM_DSI_ENGINE 21
-#define CLK_MM_DSI_DIG 22
-#define CLK_MM_DPI_DIGL 23
-#define CLK_MM_DPI_ENGINE 24
-#define CLK_MM_DPI1_DIGL 25
-#define CLK_MM_DPI1_ENGINE 26
-#define CLK_MM_TVE_OUTPUT 27
-#define CLK_MM_TVE_INPUT 28
-#define CLK_MM_HDMI_PIXEL 29
-#define CLK_MM_HDMI_PLL 30
-#define CLK_MM_HDMI_AUDIO 31
-#define CLK_MM_HDMI_SPDIF 32
-#define CLK_MM_TVE_FMM 33
-#define CLK_MM_NR 34
+#define CLK_MM_DSI_ENGINE 22
+#define CLK_MM_DSI_DIG 23
+#define CLK_MM_DPI_DIGL 24
+#define CLK_MM_DPI_ENGINE 25
+#define CLK_MM_DPI1_DIGL 26
+#define CLK_MM_DPI1_ENGINE 27
+#define CLK_MM_TVE_OUTPUT 28
+#define CLK_MM_TVE_INPUT 29
+#define CLK_MM_HDMI_PIXEL 30
+#define CLK_MM_HDMI_PLL 31
+#define CLK_MM_HDMI_AUDIO 32
+#define CLK_MM_HDMI_SPDIF 33
+#define CLK_MM_TVE_FMM 34
+#define CLK_MM_NR 35
/* IMGSYS */
-#define CLK_IMG_SMI_COMM 0
-#define CLK_IMG_RESZ 1
-#define CLK_IMG_JPGDEC_SMI 2
-#define CLK_IMG_JPGDEC 3
-#define CLK_IMG_VENC_LT 4
-#define CLK_IMG_VENC 5
-#define CLK_IMG_NR 6
+
+#define CLK_IMG_SMI_COMM 1
+#define CLK_IMG_RESZ 2
+#define CLK_IMG_JPGDEC_SMI 3
+#define CLK_IMG_JPGDEC 4
+#define CLK_IMG_VENC_LT 5
+#define CLK_IMG_VENC 6
+#define CLK_IMG_NR 7
/* VDEC */
-#define CLK_VDEC_CKGEN 0
-#define CLK_VDEC_LARB 1
-#define CLK_VDEC_NR 2
+
+#define CLK_VDEC_CKGEN 1
+#define CLK_VDEC_LARB 2
+#define CLK_VDEC_NR 3
/* HIFSYS */
-#define CLK_HIFSYS_USB0PHY 0
-#define CLK_HIFSYS_USB1PHY 1
-#define CLK_HIFSYS_PCIE0 2
-#define CLK_HIFSYS_PCIE1 3
-#define CLK_HIFSYS_PCIE2 4
-#define CLK_HIFSYS_NR 5
+
+#define CLK_HIFSYS_USB0PHY 1
+#define CLK_HIFSYS_USB1PHY 2
+#define CLK_HIFSYS_PCIE0 3
+#define CLK_HIFSYS_PCIE1 4
+#define CLK_HIFSYS_PCIE2 5
+#define CLK_HIFSYS_NR 6
/* ETHSYS */
-#define CLK_ETHSYS_HSDMA 0
-#define CLK_ETHSYS_ESW 1
-#define CLK_ETHSYS_GP2 2
-#define CLK_ETHSYS_GP1 3
-#define CLK_ETHSYS_PCM 4
-#define CLK_ETHSYS_GDMA 5
-#define CLK_ETHSYS_I2S 6
-#define CLK_ETHSYS_CRYPTO 7
-#define CLK_ETHSYS_NR 8
+#define CLK_ETHSYS_HSDMA 1
+#define CLK_ETHSYS_ESW 2
+#define CLK_ETHSYS_GP2 3
+#define CLK_ETHSYS_GP1 4
+#define CLK_ETHSYS_PCM 5
+#define CLK_ETHSYS_GDMA 6
+#define CLK_ETHSYS_I2S 7
+#define CLK_ETHSYS_CRYPTO 8
+#define CLK_ETHSYS_NR 9
/* G3DSYS */
-#define CLK_G3DSYS_CORE 0
-#define CLK_G3DSYS_NR 1
+#define CLK_G3DSYS_CORE 1
+#define CLK_G3DSYS_NR 2
+
+/* BDP */
+
+#define CLK_BDP_BRG_BA 1
+#define CLK_BDP_BRG_DRAM 2
+#define CLK_BDP_LARB_DRAM 3
+#define CLK_BDP_WR_VDI_PXL 4
+#define CLK_BDP_WR_VDI_DRAM 5
+#define CLK_BDP_WR_B 6
+#define CLK_BDP_DGI_IN 7
+#define CLK_BDP_DGI_OUT 8
+#define CLK_BDP_FMT_MAST_27 9
+#define CLK_BDP_FMT_B 10
+#define CLK_BDP_OSD_B 11
+#define CLK_BDP_OSD_DRAM 12
+#define CLK_BDP_OSD_AGENT 13
+#define CLK_BDP_OSD_PXL 14
+#define CLK_BDP_RLE_B 15
+#define CLK_BDP_RLE_AGENT 16
+#define CLK_BDP_RLE_DRAM 17
+#define CLK_BDP_F27M 18
+#define CLK_BDP_F27M_VDOUT 19
+#define CLK_BDP_F27_74_74 20
+#define CLK_BDP_F2FS 21
+#define CLK_BDP_F2FS74_148 22
+#define CLK_BDP_FB 23
+#define CLK_BDP_VDO_DRAM 24
+#define CLK_BDP_VDO_2FS 25
+#define CLK_BDP_VDO_B 26
+#define CLK_BDP_WR_DI_PXL 27
+#define CLK_BDP_WR_DI_DRAM 28
+#define CLK_BDP_WR_DI_B 29
+#define CLK_BDP_NR_PXL 30
+#define CLK_BDP_NR_DRAM 31
+#define CLK_BDP_NR_B 32
+
+#define CLK_BDP_RX_F 33
+#define CLK_BDP_RX_X 34
+#define CLK_BDP_RXPDT 35
+#define CLK_BDP_RX_CSCL_N 36
+#define CLK_BDP_RX_CSCL 37
+#define CLK_BDP_RX_DDCSCL_N 38
+#define CLK_BDP_RX_DDCSCL 39
+#define CLK_BDP_RX_VCO 40
+#define CLK_BDP_RX_DP 41
+#define CLK_BDP_RX_P 42
+#define CLK_BDP_RX_M 43
+#define CLK_BDP_RX_PLL 44
+#define CLK_BDP_BRG_RT_B 45
+#define CLK_BDP_BRG_RT_DRAM 46
+#define CLK_BDP_LARBRT_DRAM 47
+#define CLK_BDP_TMDS_SYN 48
+#define CLK_BDP_HDMI_MON 49
+#define CLK_BDP_NR 50
#endif /* _DT_BINDINGS_CLK_MT2701_H */
diff --git a/include/dt-bindings/clock/mt7981-clk.h b/include/dt-bindings/clock/mt7981-clk.h
index e24c759..5232591 100644
--- a/include/dt-bindings/clock/mt7981-clk.h
+++ b/include/dt-bindings/clock/mt7981-clk.h
@@ -8,260 +8,219 @@
#ifndef _DT_BINDINGS_CLK_MT7981_H
#define _DT_BINDINGS_CLK_MT7981_H
-/* INFRACFG */
-
-#define CK_INFRA_CK_F26M 0
-#define CK_INFRA_UART 1
-#define CK_INFRA_ISPI0 2
-#define CK_INFRA_I2C 3
-#define CK_INFRA_ISPI1 4
-#define CK_INFRA_PWM 5
-#define CK_INFRA_66M_MCK 6
-#define CK_INFRA_CK_F32K 7
-#define CK_INFRA_PCIE_CK 8
-#define CK_INFRA_PWM_BCK 9
-#define CK_INFRA_PWM_CK1 10
-#define CK_INFRA_PWM_CK2 11
-#define CK_INFRA_133M_HCK 12
-#define CK_INFRA_66M_PHCK 13
-#define CK_INFRA_FAUD_L_CK 14
-#define CK_INFRA_FAUD_AUD_CK 15
-#define CK_INFRA_FAUD_EG2_CK 16
-#define CK_INFRA_I2CS_CK 17
-#define CK_INFRA_MUX_UART0 18
-#define CK_INFRA_MUX_UART1 19
-#define CK_INFRA_MUX_UART2 20
-#define CK_INFRA_NFI_CK 21
-#define CK_INFRA_SPINFI_CK 22
-#define CK_INFRA_MUX_SPI0 23
-#define CK_INFRA_MUX_SPI1 24
-#define CK_INFRA_MUX_SPI2 25
-#define CK_INFRA_RTC_32K 26
-#define CK_INFRA_FMSDC_CK 27
-#define CK_INFRA_FMSDC_HCK_CK 28
-#define CK_INFRA_PERI_133M 29
-#define CK_INFRA_133M_PHCK 30
-#define CK_INFRA_USB_SYS_CK 31
-#define CK_INFRA_USB_CK 32
-#define CK_INFRA_USB_XHCI_CK 33
-#define CK_INFRA_PCIE_GFMUX_TL_O_PRE 34
-#define CK_INFRA_F26M_CK0 35
-#define CK_INFRA_133M_MCK 36
-#define CLK_INFRA_NR_CLK 37
-
/* TOPCKGEN */
-#define CK_TOP_CB_CKSQ_40M 0
-#define CK_TOP_CB_M_416M 1
-#define CK_TOP_CB_M_D2 2
-#define CK_TOP_CB_M_D3 3
-#define CK_TOP_M_D3_D2 4
-#define CK_TOP_CB_M_D4 5
-#define CK_TOP_CB_M_D8 6
-#define CK_TOP_M_D8_D2 7
-#define CK_TOP_CB_MM_720M 8
-#define CK_TOP_CB_MM_D2 9
-#define CK_TOP_CB_MM_D3 10
-#define CK_TOP_CB_MM_D3_D5 11
-#define CK_TOP_CB_MM_D4 12
-#define CK_TOP_CB_MM_D6 13
-#define CK_TOP_MM_D6_D2 14
-#define CK_TOP_CB_MM_D8 15
-#define CK_TOP_CB_APLL2_196M 16
-#define CK_TOP_APLL2_D2 17
-#define CK_TOP_APLL2_D4 18
-#define CK_TOP_NET1_2500M 19
-#define CK_TOP_CB_NET1_D4 20
-#define CK_TOP_CB_NET1_D5 21
-#define CK_TOP_NET1_D5_D2 22
-#define CK_TOP_NET1_D5_D4 23
-#define CK_TOP_CB_NET1_D8 24
-#define CK_TOP_NET1_D8_D2 25
-#define CK_TOP_NET1_D8_D4 26
-#define CK_TOP_CB_NET2_800M 27
-#define CK_TOP_CB_NET2_D2 28
-#define CK_TOP_CB_NET2_D4 29
-#define CK_TOP_NET2_D4_D2 30
-#define CK_TOP_NET2_D4_D4 31
-#define CK_TOP_CB_NET2_D6 32
-#define CK_TOP_CB_WEDMCU_208M 33
-#define CK_TOP_CB_SGM_325M 34
-#define CK_TOP_CKSQ_40M_D2 35
-#define CK_TOP_CB_RTC_32K 36
-#define CK_TOP_CB_RTC_32P7K 37
-#define CK_TOP_USB_TX250M 38
-#define CK_TOP_FAUD 39
-#define CK_TOP_NFI1X 40
-#define CK_TOP_USB_EQ_RX250M 41
-#define CK_TOP_USB_CDR_CK 42
-#define CK_TOP_USB_LN0_CK 43
-#define CK_TOP_SPINFI_BCK 44
-#define CK_TOP_SPI 45
-#define CK_TOP_SPIM_MST 46
-#define CK_TOP_UART_BCK 47
-#define CK_TOP_PWM_BCK 48
-#define CK_TOP_I2C_BCK 49
-#define CK_TOP_PEXTP_TL 50
-#define CK_TOP_EMMC_208M 51
-#define CK_TOP_EMMC_400M 52
-#define CK_TOP_DRAMC_REF 53
-#define CK_TOP_DRAMC_MD32 54
-#define CK_TOP_SYSAXI 55
-#define CK_TOP_SYSAPB 56
-#define CK_TOP_ARM_DB_MAIN 57
-#define CK_TOP_AP2CNN_HOST 58
-#define CK_TOP_NETSYS 59
-#define CK_TOP_NETSYS_500M 60
-#define CK_TOP_NETSYS_WED_MCU 61
-#define CK_TOP_NETSYS_2X 62
-#define CK_TOP_SGM_325M 63
-#define CK_TOP_SGM_REG 64
-#define CK_TOP_F26M 65
-#define CK_TOP_EIP97B 66
-#define CK_TOP_USB3_PHY 67
-#define CK_TOP_AUD 68
-#define CK_TOP_A1SYS 69
-#define CK_TOP_AUD_L 70
-#define CK_TOP_A_TUNER 71
-#define CK_TOP_U2U3_REF 72
-#define CK_TOP_U2U3_SYS 73
-#define CK_TOP_U2U3_XHCI 74
-#define CK_TOP_USB_FRMCNT 75
-#define CK_TOP_NFI1X_SEL 76
-#define CK_TOP_SPINFI_SEL 77
-#define CK_TOP_SPI_SEL 78
-#define CK_TOP_SPIM_MST_SEL 79
-#define CK_TOP_UART_SEL 80
-#define CK_TOP_PWM_SEL 81
-#define CK_TOP_I2C_SEL 82
-#define CK_TOP_PEXTP_TL_SEL 83
-#define CK_TOP_EMMC_208M_SEL 84
-#define CK_TOP_EMMC_400M_SEL 85
-#define CK_TOP_F26M_SEL 86
-#define CK_TOP_DRAMC_SEL 87
-#define CK_TOP_DRAMC_MD32_SEL 88
-#define CK_TOP_SYSAXI_SEL 89
-#define CK_TOP_SYSAPB_SEL 90
-#define CK_TOP_ARM_DB_MAIN_SEL 91
-#define CK_TOP_AP2CNN_HOST_SEL 92
-#define CK_TOP_NETSYS_SEL 93
-#define CK_TOP_NETSYS_500M_SEL 94
-#define CK_TOP_NETSYS_MCU_SEL 95
-#define CK_TOP_NETSYS_2X_SEL 96
-#define CK_TOP_SGM_325M_SEL 97
-#define CK_TOP_SGM_REG_SEL 98
-#define CK_TOP_EIP97B_SEL 99
-#define CK_TOP_USB3_PHY_SEL 100
-#define CK_TOP_AUD_SEL 101
-#define CK_TOP_A1SYS_SEL 102
-#define CK_TOP_AUD_L_SEL 103
-#define CK_TOP_A_TUNER_SEL 104
-#define CK_TOP_U2U3_SEL 105
-#define CK_TOP_U2U3_SYS_SEL 106
-#define CK_TOP_U2U3_XHCI_SEL 107
-#define CK_TOP_USB_FRMCNT_SEL 108
-#define CLK_TOP_NR_CLK 109
+#define CLK_TOP_CB_CKSQ_40M 0
+#define CLK_TOP_CB_M_416M 1
+#define CLK_TOP_CB_M_D2 2
+#define CLK_TOP_CB_M_D3 3
+#define CLK_TOP_M_D3_D2 4
+#define CLK_TOP_CB_M_D4 5
+#define CLK_TOP_CB_M_D8 6
+#define CLK_TOP_M_D8_D2 7
+#define CLK_TOP_CB_MM_720M 8
+#define CLK_TOP_CB_MM_D2 9
+#define CLK_TOP_CB_MM_D3 10
+#define CLK_TOP_CB_MM_D3_D5 11
+#define CLK_TOP_CB_MM_D4 12
+#define CLK_TOP_CB_MM_D6 13
+#define CLK_TOP_MM_D6_D2 14
+#define CLK_TOP_CB_MM_D8 15
+#define CLK_TOP_CB_APLL2_196M 16
+#define CLK_TOP_APLL2_D2 17
+#define CLK_TOP_APLL2_D4 18
+#define CLK_TOP_NET1_2500M 19
+#define CLK_TOP_CB_NET1_D4 20
+#define CLK_TOP_CB_NET1_D5 21
+#define CLK_TOP_NET1_D5_D2 22
+#define CLK_TOP_NET1_D5_D4 23
+#define CLK_TOP_CB_NET1_D8 24
+#define CLK_TOP_NET1_D8_D2 25
+#define CLK_TOP_NET1_D8_D4 26
+#define CLK_TOP_CB_NET2_800M 27
+#define CLK_TOP_CB_NET2_D2 28
+#define CLK_TOP_CB_NET2_D4 29
+#define CLK_TOP_NET2_D4_D2 30
+#define CLK_TOP_NET2_D4_D4 31
+#define CLK_TOP_CB_NET2_D6 32
+#define CLK_TOP_CB_WEDMCU_208M 33
+#define CLK_TOP_CB_SGM_325M 34
+#define CLK_TOP_CKSQ_40M_D2 35
+#define CLK_TOP_CB_RTC_32K 36
+#define CLK_TOP_CB_RTC_32P7K 37
+#define CLK_TOP_USB_TX250M 38
+#define CLK_TOP_FAUD 39
+#define CLK_TOP_NFI1X 40
+#define CLK_TOP_USB_EQ_RX250M 41
+#define CLK_TOP_USB_CDR_CK 42
+#define CLK_TOP_USB_LN0_CK 43
+#define CLK_TOP_SPINFI_BCK 44
+#define CLK_TOP_SPI 45
+#define CLK_TOP_SPIM_MST 46
+#define CLK_TOP_UART_BCK 47
+#define CLK_TOP_PWM_BCK 48
+#define CLK_TOP_I2C_BCK 49
+#define CLK_TOP_PEXTP_TL 50
+#define CLK_TOP_EMMC_208M 51
+#define CLK_TOP_EMMC_400M 52
+#define CLK_TOP_DRAMC_REF 53
+#define CLK_TOP_DRAMC_MD32 54
+#define CLK_TOP_SYSAXI 55
+#define CLK_TOP_SYSAPB 56
+#define CLK_TOP_ARM_DB_MAIN 57
+#define CLK_TOP_AP2CNN_HOST 58
+#define CLK_TOP_NETSYS 59
+#define CLK_TOP_NETSYS_500M 60
+#define CLK_TOP_NETSYS_WED_MCU 61
+#define CLK_TOP_NETSYS_2X 62
+#define CLK_TOP_SGM_325M 63
+#define CLK_TOP_SGM_REG 64
+#define CLK_TOP_F26M 65
+#define CLK_TOP_EIP97B 66
+#define CLK_TOP_USB3_PHY 67
+#define CLK_TOP_AUD 68
+#define CLK_TOP_A1SYS 69
+#define CLK_TOP_AUD_L 70
+#define CLK_TOP_A_TUNER 71
+#define CLK_TOP_U2U3_REF 72
+#define CLK_TOP_U2U3_SYS 73
+#define CLK_TOP_U2U3_XHCI 74
+#define CLK_TOP_USB_FRMCNT 75
+#define CLK_TOP_NFI1X_SEL 76
+#define CLK_TOP_SPINFI_SEL 77
+#define CLK_TOP_SPI_SEL 78
+#define CLK_TOP_SPIM_MST_SEL 79
+#define CLK_TOP_UART_SEL 80
+#define CLK_TOP_PWM_SEL 81
+#define CLK_TOP_I2C_SEL 82
+#define CLK_TOP_PEXTP_TL_SEL 83
+#define CLK_TOP_EMMC_208M_SEL 84
+#define CLK_TOP_EMMC_400M_SEL 85
+#define CLK_TOP_F26M_SEL 86
+#define CLK_TOP_DRAMC_SEL 87
+#define CLK_TOP_DRAMC_MD32_SEL 88
+#define CLK_TOP_SYSAXI_SEL 89
+#define CLK_TOP_SYSAPB_SEL 90
+#define CLK_TOP_ARM_DB_MAIN_SEL 91
+#define CLK_TOP_AP2CNN_HOST_SEL 92
+#define CLK_TOP_NETSYS_SEL 93
+#define CLK_TOP_NETSYS_500M_SEL 94
+#define CLK_TOP_NETSYS_MCU_SEL 95
+#define CLK_TOP_NETSYS_2X_SEL 96
+#define CLK_TOP_SGM_325M_SEL 97
+#define CLK_TOP_SGM_REG_SEL 98
+#define CLK_TOP_EIP97B_SEL 99
+#define CLK_TOP_USB3_PHY_SEL 100
+#define CLK_TOP_AUD_SEL 101
+#define CLK_TOP_A1SYS_SEL 102
+#define CLK_TOP_AUD_L_SEL 103
+#define CLK_TOP_A_TUNER_SEL 104
+#define CLK_TOP_U2U3_SEL 105
+#define CLK_TOP_U2U3_SYS_SEL 106
+#define CLK_TOP_U2U3_XHCI_SEL 107
+#define CLK_TOP_USB_FRMCNT_SEL 108
+#define CLK_TOP_AUD_I2S_M 109
+#define CLK_TOP_NR_CLK 110
-/*
- * INFRACFG_AO
- * clock muxes need to be append to infracfg domain, and clock gates
- * need to be keep in infracgh_ao domain
- */
-#define INFRACFG_AO_OFFSET 10
+/* INFRACFG */
-#define CK_INFRA_UART0_SEL (0 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_UART1_SEL (1 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_UART2_SEL (2 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_SPI0_SEL (3 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_SPI1_SEL (4 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_SPI2_SEL (5 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_PWM1_SEL (6 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_PWM2_SEL (7 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_PWM_BSEL (8 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_PCIE_SEL (9 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_GPT_STA (10 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_PWM_HCK (11 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_PWM_STA (12 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_PWM1_CK (13 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_PWM2_CK (14 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_CQ_DMA_CK (15 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_AUD_BUS_CK (16 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_AUD_26M_CK (17 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_AUD_L_CK (18 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_AUD_AUD_CK (19 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_AUD_EG2_CK (20 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_DRAMC_26M_CK (21 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_DBG_CK (22 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_AP_DMA_CK (23 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_SEJ_CK (24 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_SEJ_13M_CK (25 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_THERM_CK (26 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_I2CO_CK (27 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_UART0_CK (28 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_UART1_CK (29 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_UART2_CK (30 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_SPI2_CK (31 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_SPI2_HCK_CK (32 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_NFI1_CK (33 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_SPINFI1_CK (34 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_NFI_HCK_CK (35 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_SPI0_CK (36 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_SPI1_CK (37 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_SPI0_HCK_CK (38 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_SPI1_HCK_CK (39 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_FRTC_CK (40 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_MSDC_CK (41 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_MSDC_HCK_CK (42 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_MSDC_133M_CK (43 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_MSDC_66M_CK (44 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_ADC_26M_CK (45 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_ADC_FRC_CK (46 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_FBIST2FPC_CK (47 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_I2C_MCK_CK (48 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_I2C_PCK_CK (49 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_IUSB_133_CK (50 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_IUSB_66M_CK (51 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_IUSB_SYS_CK (52 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_IUSB_CK (53 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_IPCIE_CK (54 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_IPCIER_CK (55 - INFRACFG_AO_OFFSET)
-#define CK_INFRA_IPCIEB_CK (56 - INFRACFG_AO_OFFSET)
-#define CLK_INFRA_AO_NR_CLK (57 - INFRACFG_AO_OFFSET)
+#define CLK_INFRA_66M_MCK 0
+#define CLK_INFRA_UART0_SEL 1
+#define CLK_INFRA_UART1_SEL 2
+#define CLK_INFRA_UART2_SEL 3
+#define CLK_INFRA_SPI0_SEL 4
+#define CLK_INFRA_SPI1_SEL 5
+#define CLK_INFRA_SPI2_SEL 6
+#define CLK_INFRA_PWM1_SEL 7
+#define CLK_INFRA_PWM2_SEL 8
+#define CLK_INFRA_PWM3_SEL 9
+#define CLK_INFRA_PWM_BSEL 10
+#define CLK_INFRA_PCIE_SEL 11
+#define CLK_INFRA_GPT_STA 12
+#define CLK_INFRA_PWM_HCK 13
+#define CLK_INFRA_PWM_STA 14
+#define CLK_INFRA_PWM1_CK 15
+#define CLK_INFRA_PWM2_CK 16
+#define CLK_INFRA_PWM3_CK 17
+#define CLK_INFRA_CQ_DMA_CK 18
+#define CLK_INFRA_AUD_BUS_CK 19
+#define CLK_INFRA_AUD_26M_CK 20
+#define CLK_INFRA_AUD_L_CK 21
+#define CLK_INFRA_AUD_AUD_CK 22
+#define CLK_INFRA_AUD_EG2_CK 23
+#define CLK_INFRA_DRAMC_26M_CK 24
+#define CLK_INFRA_DBG_CK 25
+#define CLK_INFRA_AP_DMA_CK 26
+#define CLK_INFRA_SEJ_CK 27
+#define CLK_INFRA_SEJ_13M_CK 28
+#define CLK_INFRA_THERM_CK 29
+#define CLK_INFRA_I2C0_CK 30
+#define CLK_INFRA_UART0_CK 31
+#define CLK_INFRA_UART1_CK 32
+#define CLK_INFRA_UART2_CK 33
+#define CLK_INFRA_SPI2_CK 34
+#define CLK_INFRA_SPI2_HCK_CK 35
+#define CLK_INFRA_NFI1_CK 36
+#define CLK_INFRA_SPINFI1_CK 37
+#define CLK_INFRA_NFI_HCK_CK 38
+#define CLK_INFRA_SPI0_CK 39
+#define CLK_INFRA_SPI1_CK 40
+#define CLK_INFRA_SPI0_HCK_CK 41
+#define CLK_INFRA_SPI1_HCK_CK 42
+#define CLK_INFRA_FRTC_CK 43
+#define CLK_INFRA_MSDC_CK 44
+#define CLK_INFRA_MSDC_HCK_CK 45
+#define CLK_INFRA_MSDC_133M_CK 46
+#define CLK_INFRA_MSDC_66M_CK 47
+#define CLK_INFRA_ADC_26M_CK 48
+#define CLK_INFRA_ADC_FRC_CK 49
+#define CLK_INFRA_FBIST2FPC_CK 50
+#define CLK_INFRA_I2C_MCK_CK 51
+#define CLK_INFRA_I2C_PCK_CK 52
+#define CLK_INFRA_IUSB_133_CK 53
+#define CLK_INFRA_IUSB_66M_CK 54
+#define CLK_INFRA_IUSB_SYS_CK 55
+#define CLK_INFRA_IUSB_CK 56
+#define CLK_INFRA_IPCIE_CK 57
+#define CLK_INFRA_IPCIE_PIPE_CK 58
+#define CLK_INFRA_IPCIER_CK 59
+#define CLK_INFRA_IPCIEB_CK 60
+#define CLK_INFRA_NR_CLK 61
/* APMIXEDSYS */
-#define CK_APMIXED_ARMPLL 0
-#define CK_APMIXED_NET2PLL 1
-#define CK_APMIXED_MMPLL 2
-#define CK_APMIXED_SGMPLL 3
-#define CK_APMIXED_WEDMCUPLL 4
-#define CK_APMIXED_NET1PLL 5
-#define CK_APMIXED_MPLL 6
-#define CK_APMIXED_APLL2 7
+#define CLK_APMIXED_ARMPLL 0
+#define CLK_APMIXED_NET2PLL 1
+#define CLK_APMIXED_MMPLL 2
+#define CLK_APMIXED_SGMPLL 3
+#define CLK_APMIXED_WEDMCUPLL 4
+#define CLK_APMIXED_NET1PLL 5
+#define CLK_APMIXED_MPLL 6
+#define CLK_APMIXED_APLL2 7
#define CLK_APMIXED_NR_CLK 8
/* SGMIISYS_0 */
-#define CK_SGM0_TX_EN 0
-#define CK_SGM0_RX_EN 1
-#define CK_SGM0_CK0_EN 2
-#define CK_SGM0_CDR_CK0_EN 3
+#define CLK_SGM0_TX_EN 0
+#define CLK_SGM0_RX_EN 1
+#define CLK_SGM0_CK0_EN 2
+#define CLK_SGM0_CDR_CK0_EN 3
#define CLK_SGMII0_NR_CLK 4
/* SGMIISYS_1 */
-#define CK_SGM1_TX_EN 0
-#define CK_SGM1_RX_EN 1
-#define CK_SGM1_CK1_EN 2
-#define CK_SGM1_CDR_CK1_EN 3
+#define CLK_SGM1_TX_EN 0
+#define CLK_SGM1_RX_EN 1
+#define CLK_SGM1_CK1_EN 2
+#define CLK_SGM1_CDR_CK1_EN 3
#define CLK_SGMII1_NR_CLK 4
/* ETHSYS */
-#define CK_ETH_FE_EN 0
-#define CK_ETH_GP2_EN 1
-#define CK_ETH_GP1_EN 2
-#define CK_ETH_WOCPU0_EN 3
+#define CLK_ETH_FE_EN 0
+#define CLK_ETH_GP2_EN 1
+#define CLK_ETH_GP1_EN 2
+#define CLK_ETH_WOCPU0_EN 3
#define CLK_ETH_NR_CLK 4
#endif /* _DT_BINDINGS_CLK_MT7981_H */
diff --git a/include/dt-bindings/clock/mt7986-clk.h b/include/dt-bindings/clock/mt7986-clk.h
index 820f863..5da2603 100644
--- a/include/dt-bindings/clock/mt7986-clk.h
+++ b/include/dt-bindings/clock/mt7986-clk.h
@@ -8,240 +8,169 @@
#ifndef _DT_BINDINGS_CLK_MT7986_H
#define _DT_BINDINGS_CLK_MT7986_H
-/* INFRACFG */
-
-#define CK_INFRA_CK_F26M 0
-#define CK_INFRA_UART 1
-#define CK_INFRA_ISPI0 2
-#define CK_INFRA_I2C 3
-#define CK_INFRA_ISPI1 4
-#define CK_INFRA_PWM 5
-#define CK_INFRA_66M_MCK 6
-#define CK_INFRA_CK_F32K 7
-#define CK_INFRA_PCIE_CK 8
-#define CK_INFRA_PWM_BCK 9
-#define CK_INFRA_PWM_CK1 10
-#define CK_INFRA_PWM_CK2 11
-#define CK_INFRA_133M_HCK 12
-#define CK_INFRA_EIP_CK 13
-#define CK_INFRA_66M_PHCK 14
-#define CK_INFRA_FAUD_L_CK 15
-#define CK_INFRA_FAUD_AUD_CK 17
-#define CK_INFRA_FAUD_EG2_CK 17
-#define CK_INFRA_I2CS_CK 18
-#define CK_INFRA_MUX_UART0 19
-#define CK_INFRA_MUX_UART1 20
-#define CK_INFRA_MUX_UART2 21
-#define CK_INFRA_NFI_CK 22
-#define CK_INFRA_SPINFI_CK 23
-#define CK_INFRA_MUX_SPI0 24
-#define CK_INFRA_MUX_SPI1 25
-#define CK_INFRA_RTC_32K 26
-#define CK_INFRA_FMSDC_CK 27
-#define CK_INFRA_FMSDC_HCK_CK 28
-#define CK_INFRA_PERI_133M 29
-#define CK_INFRA_133M_PHCK 30
-#define CK_INFRA_USB_SYS_CK 31
-#define CK_INFRA_USB_CK 32
-#define CK_INFRA_USB_XHCI_CK 33
-#define CK_INFRA_PCIE_GFMUX_TL_O_PRE 34
-#define CK_INFRA_F26M_CK0 35
-#define CK_INFRA_HD_133M 36
-#define CLK_INFRA_NR_CLK 37
-
/* TOPCKGEN */
-#define CK_TOP_CB_CKSQ_40M 0
-#define CK_TOP_CB_M_416M 1
-#define CK_TOP_CB_M_D2 2
-#define CK_TOP_CB_M_D4 3
-#define CK_TOP_CB_M_D8 4
-#define CK_TOP_M_D8_D2 5
-#define CK_TOP_M_D3_D2 6
-#define CK_TOP_CB_MM_D2 7
-#define CK_TOP_CB_MM_D4 8
-#define CK_TOP_CB_MM_D8 9
-#define CK_TOP_MM_D8_D2 10
-#define CK_TOP_MM_D3_D8 11
-#define CK_TOP_CB_U2_PHYD_CK 12
-#define CK_TOP_CB_APLL2_196M 13
-#define CK_TOP_APLL2_D4 14
-#define CK_TOP_CB_NET1_D4 15
-#define CK_TOP_CB_NET1_D5 16
-#define CK_TOP_NET1_D5_D2 17
-#define CK_TOP_NET1_D5_D4 18
-#define CK_TOP_NET1_D8_D2 19
-#define CK_TOP_NET1_D8_D4 20
-#define CK_TOP_CB_NET2_800M 21
-#define CK_TOP_CB_NET2_D4 22
-#define CK_TOP_NET2_D4_D2 23
-#define CK_TOP_NET2_D3_D2 24
-#define CK_TOP_CB_WEDMCU_760M 25
-#define CK_TOP_WEDMCU_D5_D2 26
-#define CK_TOP_CB_SGM_325M 27
-#define CK_TOP_CB_CKSQ_40M_D2 28
-#define CK_TOP_CB_RTC_32K 29
-#define CK_TOP_CB_RTC_32P7K 30
-#define CK_TOP_NFI1X 31
-#define CK_TOP_USB_EQ_RX250M 32
-#define CK_TOP_USB_TX250M 33
-#define CK_TOP_USB_LN0_CK 34
-#define CK_TOP_USB_CDR_CK 35
-#define CK_TOP_SPINFI_BCK 36
-#define CK_TOP_I2C_BCK 37
-#define CK_TOP_PEXTP_TL 38
-#define CK_TOP_EMMC_250M 39
-#define CK_TOP_EMMC_416M 40
-#define CK_TOP_F_26M_ADC_CK 41
-#define CK_TOP_SYSAXI 42
-#define CK_TOP_NETSYS_WED_MCU 43
-#define CK_TOP_NETSYS_2X 44
-#define CK_TOP_SGM_325M 45
-#define CK_TOP_A1SYS 46
-#define CK_TOP_EIP_B 47
-#define CK_TOP_F26M 48
-#define CK_TOP_AUD_L 49
-#define CK_TOP_A_TUNER 50
-#define CK_TOP_U2U3_REF 51
-#define CK_TOP_U2U3_SYS 52
-#define CK_TOP_U2U3_XHCI 53
-#define CK_TOP_AP2CNN_HOST 54
-#define CK_TOP_NFI1X_SEL 55
-#define CK_TOP_SPINFI_SEL 56
-#define CK_TOP_SPI_SEL 57
-#define CK_TOP_SPIM_MST_SEL 58
-#define CK_TOP_UART_SEL 59
-#define CK_TOP_PWM_SEL 60
-#define CK_TOP_I2C_SEL 61
-#define CK_TOP_PEXTP_TL_SEL 62
-#define CK_TOP_EMMC_250M_SEL 63
-#define CK_TOP_EMMC_416M_SEL 64
-#define CK_TOP_F_26M_ADC_SEL 65
-#define CK_TOP_DRAMC_SEL 66
-#define CK_TOP_DRAMC_MD32_SEL 67
-#define CK_TOP_SYSAXI_SEL 68
-#define CK_TOP_SYSAPB_SEL 69
-#define CK_TOP_ARM_DB_MAIN_SEL 70
-#define CK_TOP_ARM_DB_JTSEL 71
-#define CK_TOP_NETSYS_SEL 72
-#define CK_TOP_NETSYS_500M_SEL 73
-#define CK_TOP_NETSYS_MCU_SEL 74
-#define CK_TOP_NETSYS_2X_SEL 75
-#define CK_TOP_SGM_325M_SEL 76
-#define CK_TOP_SGM_REG_SEL 77
-#define CK_TOP_A1SYS_SEL 78
-#define CK_TOP_CONN_MCUSYS_SEL 79
-#define CK_TOP_EIP_B_SEL 80
-#define CK_TOP_PCIE_PHY_SEL 81
-#define CK_TOP_USB3_PHY_SEL 82
-#define CK_TOP_F26M_SEL 83
-#define CK_TOP_AUD_L_SEL 84
-#define CK_TOP_A_TUNER_SEL 85
-#define CK_TOP_U2U3_SEL 86
-#define CK_TOP_U2U3_SYS_SEL 87
-#define CK_TOP_U2U3_XHCI_SEL 88
-#define CK_TOP_DA_U2_REFSEL 89
-#define CK_TOP_DA_U2_CK_1P_SEL 90
-#define CK_TOP_AP2CNN_HOST_SEL 91
-#define CLK_TOP_NR_CLK 92
+#define CLK_TOP_XTAL 0
+#define CLK_TOP_XTAL_D2 1
+#define CLK_TOP_RTC_32K 2
+#define CLK_TOP_RTC_32P7K 3
+/* #define CLK_TOP_A_TUNER 4 */
+#define CLK_TOP_MPLL_D2 4
+#define CLK_TOP_MPLL_D4 5
+#define CLK_TOP_MPLL_D8 6
+#define CLK_TOP_MPLL_D8_D2 7
+#define CLK_TOP_MPLL_D3_D2 8
+#define CLK_TOP_MMPLL_D2 9
+#define CLK_TOP_MMPLL_D4 10
+#define CLK_TOP_MMPLL_D8 11
+#define CLK_TOP_MMPLL_D8_D2 12
+#define CLK_TOP_MMPLL_D3_D8 13
+#define CLK_TOP_MMPLL_U2PHYD 14
+#define CLK_TOP_APLL2_D4 15
+#define CLK_TOP_NET1PLL_D4 16
+#define CLK_TOP_NET1PLL_D5 17
+#define CLK_TOP_NET1PLL_D5_D2 18
+#define CLK_TOP_NET1PLL_D5_D4 19
+#define CLK_TOP_NET1PLL_D8_D2 20
+#define CLK_TOP_NET1PLL_D8_D4 21
+#define CLK_TOP_NET2PLL_D4 22
+#define CLK_TOP_NET2PLL_D4_D2 23
+#define CLK_TOP_NET2PLL_D3_D2 24
+#define CLK_TOP_WEDMCUPLL_D5_D2 25
+#define CLK_TOP_NFI1X_SEL 26
+#define CLK_TOP_SPINFI_SEL 27
+#define CLK_TOP_SPI_SEL 28
+#define CLK_TOP_SPIM_MST_SEL 29
+#define CLK_TOP_UART_SEL 30
+#define CLK_TOP_PWM_SEL 31
+#define CLK_TOP_I2C_SEL 32
+#define CLK_TOP_PEXTP_TL_SEL 33
+#define CLK_TOP_EMMC_250M_SEL 34
+#define CLK_TOP_EMMC_416M_SEL 35
+#define CLK_TOP_F_26M_ADC_SEL 36
+#define CLK_TOP_DRAMC_SEL 37
+#define CLK_TOP_DRAMC_MD32_SEL 38
+#define CLK_TOP_SYSAXI_SEL 39
+#define CLK_TOP_SYSAPB_SEL 40
+#define CLK_TOP_ARM_DB_MAIN_SEL 41
+#define CLK_TOP_ARM_DB_JTSEL 42
+#define CLK_TOP_NETSYS_SEL 43
+#define CLK_TOP_NETSYS_500M_SEL 44
+#define CLK_TOP_NETSYS_MCU_SEL 45
+#define CLK_TOP_NETSYS_2X_SEL 46
+#define CLK_TOP_SGM_325M_SEL 47
+#define CLK_TOP_SGM_REG_SEL 48
+#define CLK_TOP_A1SYS_SEL 49
+#define CLK_TOP_CONN_MCUSYS_SEL 50
+#define CLK_TOP_EIP_B_SEL 51
+#define CLK_TOP_PCIE_PHY_SEL 52
+#define CLK_TOP_USB3_PHY_SEL 53
+#define CLK_TOP_F26M_SEL 54
+#define CLK_TOP_AUD_L_SEL 55
+#define CLK_TOP_A_TUNER_SEL 56
+#define CLK_TOP_U2U3_SEL 57
+#define CLK_TOP_U2U3_SYS_SEL 58
+#define CLK_TOP_U2U3_XHCI_SEL 59
+#define CLK_TOP_DA_U2_REFSEL 60
+#define CLK_TOP_DA_U2_CK_1P_SEL 61
+#define CLK_TOP_AP2CNN_HOST_SEL 62
+#define CLK_TOP_NR_CLK 63
-/*
- * INFRACFG_AO
- * clock muxes need to be append to infracfg domain, and clock gates
- * need to be keep in infracgh_ao domain
- */
+/* INFRACFG */
-#define CK_INFRA_UART0_SEL (0 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_UART1_SEL (1 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_UART2_SEL (2 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_SPI0_SEL (3 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_SPI1_SEL (4 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_PWM1_SEL (5 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_PWM2_SEL (6 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_PWM_BSEL (7 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_PCIE_SEL (8 + CLK_INFRA_NR_CLK)
-#define CK_INFRA_GPT_STA 0
-#define CK_INFRA_PWM_HCK 1
-#define CK_INFRA_PWM_STA 2
-#define CK_INFRA_PWM1_CK 3
-#define CK_INFRA_PWM2_CK 4
-#define CK_INFRA_CQ_DMA_CK 5
-#define CK_INFRA_EIP97_CK 6
-#define CK_INFRA_AUD_BUS_CK 7
-#define CK_INFRA_AUD_26M_CK 8
-#define CK_INFRA_AUD_L_CK 9
-#define CK_INFRA_AUD_AUD_CK 10
-#define CK_INFRA_AUD_EG2_CK 11
-#define CK_INFRA_DRAMC_26M_CK 12
-#define CK_INFRA_DBG_CK 13
-#define CK_INFRA_AP_DMA_CK 14
-#define CK_INFRA_SEJ_CK 15
-#define CK_INFRA_SEJ_13M_CK 16
-#define CK_INFRA_THERM_CK 17
-#define CK_INFRA_I2CO_CK 18
-#define CK_INFRA_TRNG_CK 19
-#define CK_INFRA_UART0_CK 20
-#define CK_INFRA_UART1_CK 21
-#define CK_INFRA_UART2_CK 22
-#define CK_INFRA_NFI1_CK 23
-#define CK_INFRA_SPINFI1_CK 24
-#define CK_INFRA_NFI_HCK_CK 25
-#define CK_INFRA_SPI0_CK 26
-#define CK_INFRA_SPI1_CK 27
-#define CK_INFRA_SPI0_HCK_CK 28
-#define CK_INFRA_SPI1_HCK_CK 29
-#define CK_INFRA_FRTC_CK 30
-#define CK_INFRA_MSDC_CK 31
-#define CK_INFRA_MSDC_HCK_CK 32
-#define CK_INFRA_MSDC_133M_CK 33
-#define CK_INFRA_MSDC_66M_CK 34
-#define CK_INFRA_ADC_26M_CK 35
-#define CK_INFRA_ADC_FRC_CK 36
-#define CK_INFRA_FBIST2FPC_CK 37
-#define CK_INFRA_IUSB_133_CK 38
-#define CK_INFRA_IUSB_66M_CK 39
-#define CK_INFRA_IUSB_SYS_CK 40
-#define CK_INFRA_IUSB_CK 41
-#define CK_INFRA_IPCIE_CK 42
-#define CK_INFRA_IPCIER_CK 43
-#define CK_INFRA_IPCIEB_CK 44
-#define CLK_INFRA_AO_NR_CLK 45
+#define CLK_INFRA_SYSAXI_D2 0
+#define CLK_INFRA_UART0_SEL 1
+#define CLK_INFRA_UART1_SEL 2
+#define CLK_INFRA_UART2_SEL 3
+#define CLK_INFRA_SPI0_SEL 4
+#define CLK_INFRA_SPI1_SEL 5
+#define CLK_INFRA_PWM1_SEL 6
+#define CLK_INFRA_PWM2_SEL 7
+#define CLK_INFRA_PWM_BSEL 8
+#define CLK_INFRA_PCIE_SEL 9
+#define CLK_INFRA_GPT_STA 10
+#define CLK_INFRA_PWM_HCK 11
+#define CLK_INFRA_PWM_STA 12
+#define CLK_INFRA_PWM1_CK 13
+#define CLK_INFRA_PWM2_CK 14
+#define CLK_INFRA_CQ_DMA_CK 15
+#define CLK_INFRA_EIP97_CK 16
+#define CLK_INFRA_AUD_BUS_CK 17
+#define CLK_INFRA_AUD_26M_CK 18
+#define CLK_INFRA_AUD_L_CK 19
+#define CLK_INFRA_AUD_AUD_CK 20
+#define CLK_INFRA_AUD_EG2_CK 21
+#define CLK_INFRA_DRAMC_26M_CK 22
+#define CLK_INFRA_DBG_CK 23
+#define CLK_INFRA_AP_DMA_CK 24
+#define CLK_INFRA_SEJ_CK 25
+#define CLK_INFRA_SEJ_13M_CK 26
+#define CLK_INFRA_THERM_CK 27
+#define CLK_INFRA_I2C0_CK 28
+#define CLK_INFRA_UART0_CK 29
+#define CLK_INFRA_UART1_CK 30
+#define CLK_INFRA_UART2_CK 31
+#define CLK_INFRA_NFI1_CK 32
+#define CLK_INFRA_SPINFI1_CK 33
+#define CLK_INFRA_NFI_HCK_CK 34
+#define CLK_INFRA_SPI0_CK 35
+#define CLK_INFRA_SPI1_CK 36
+#define CLK_INFRA_SPI0_HCK_CK 37
+#define CLK_INFRA_SPI1_HCK_CK 38
+#define CLK_INFRA_FRTC_CK 39
+#define CLK_INFRA_MSDC_CK 40
+#define CLK_INFRA_MSDC_HCK_CK 41
+#define CLK_INFRA_MSDC_133M_CK 42
+#define CLK_INFRA_MSDC_66M_CK 43
+#define CLK_INFRA_ADC_26M_CK 44
+#define CLK_INFRA_ADC_FRC_CK 45
+#define CLK_INFRA_FBIST2FPC_CK 46
+#define CLK_INFRA_IUSB_133_CK 47
+#define CLK_INFRA_IUSB_66M_CK 48
+#define CLK_INFRA_IUSB_SYS_CK 49
+#define CLK_INFRA_IUSB_CK 50
+#define CLK_INFRA_IPCIE_CK 51
+#define CLK_INFRA_IPCIE_PIPE_CK 52
+#define CLK_INFRA_IPCIER_CK 53
+#define CLK_INFRA_IPCIEB_CK 54
+#define CLK_INFRA_TRNG_CK 55
+#define CLK_INFRA_AO_NR_CLK 46
/* APMIXEDSYS */
-#define CK_APMIXED_ARMPLL 0
-#define CK_APMIXED_NET2PLL 1
-#define CK_APMIXED_MMPLL 2
-#define CK_APMIXED_SGMPLL 3
-#define CK_APMIXED_WEDMCUPLL 4
-#define CK_APMIXED_NET1PLL 5
-#define CK_APMIXED_MPLL 6
-#define CK_APMIXED_APLL2 7
+#define CLK_APMIXED_ARMPLL 0
+#define CLK_APMIXED_NET2PLL 1
+#define CLK_APMIXED_MMPLL 2
+#define CLK_APMIXED_SGMPLL 3
+#define CLK_APMIXED_WEDMCUPLL 4
+#define CLK_APMIXED_NET1PLL 5
+#define CLK_APMIXED_MPLL 6
+#define CLK_APMIXED_APLL2 7
#define CLK_APMIXED_NR_CLK 8
/* SGMIISYS_0 */
-#define CK_SGM0_TX_EN 0
-#define CK_SGM0_RX_EN 1
-#define CK_SGM0_CK0_EN 2
-#define CK_SGM0_CDR_CK0_EN 3
+#define CLK_SGM0_TX_EN 0
+#define CLK_SGM0_RX_EN 1
+#define CLK_SGM0_CK0_EN 2
+#define CLK_SGM0_CDR_CK0_EN 3
#define CLK_SGMII0_NR_CLK 4
/* SGMIISYS_1 */
-#define CK_SGM1_TX_EN 0
-#define CK_SGM1_RX_EN 1
-#define CK_SGM1_CK1_EN 2
-#define CK_SGM1_CDR_CK1_EN 3
+#define CLK_SGM1_TX_EN 0
+#define CLK_SGM1_RX_EN 1
+#define CLK_SGM1_CK1_EN 2
+#define CLK_SGM1_CDR_CK1_EN 3
#define CLK_SGMII1_NR_CLK 4
/* ETHSYS */
-#define CK_ETH_FE_EN 0
-#define CK_ETH_GP2_EN 1
-#define CK_ETH_GP1_EN 2
-#define CK_ETH_WOCPU1_EN 3
-#define CK_ETH_WOCPU0_EN 4
+#define CLK_ETH_FE_EN 0
+#define CLK_ETH_GP2_EN 1
+#define CLK_ETH_GP1_EN 2
+#define CLK_ETH_WOCPU1_EN 3
+#define CLK_ETH_WOCPU0_EN 4
#define CLK_ETH_NR_CLK 5
#endif
diff --git a/include/dt-bindings/clock/mt7988-clk.h b/include/dt-bindings/clock/mt7988-clk.h
index 5c21bf6..e6e6978 100644
--- a/include/dt-bindings/clock/mt7988-clk.h
+++ b/include/dt-bindings/clock/mt7988-clk.h
@@ -8,342 +8,257 @@
#ifndef _DT_BINDINGS_CLK_MT7988_H
#define _DT_BINDINGS_CLK_MT7988_H
-/* INFRACFG */
-/* mtk_fixed_factor */
-#define CK_INFRA_CK_F26M 0
-#define CK_INFRA_PWM_O 1
-#define CK_INFRA_PCIE_OCC_P0 2
-#define CK_INFRA_PCIE_OCC_P1 3
-#define CK_INFRA_PCIE_OCC_P2 4
-#define CK_INFRA_PCIE_OCC_P3 5
-#define CK_INFRA_133M_HCK 6
-#define CK_INFRA_133M_PHCK 7
-#define CK_INFRA_66M_PHCK 8
-#define CK_INFRA_FAUD_L_O 9
-#define CK_INFRA_FAUD_AUD_O 10
-#define CK_INFRA_FAUD_EG2_O 11
-#define CK_INFRA_I2C_O 12
-#define CK_INFRA_UART_O0 13
-#define CK_INFRA_UART_O1 14
-#define CK_INFRA_UART_O2 15
-#define CK_INFRA_NFI_O 16
-#define CK_INFRA_SPINFI_O 17
-#define CK_INFRA_SPI0_O 18
-#define CK_INFRA_SPI1_O 19
-#define CK_INFRA_LB_MUX_FRTC 20
-#define CK_INFRA_FRTC 21
-#define CK_INFRA_FMSDC400_O 22
-#define CK_INFRA_FMSDC2_HCK_OCC 23
-#define CK_INFRA_PERI_133M 24
-#define CK_INFRA_USB_O 25
-#define CK_INFRA_USB_O_P1 26
-#define CK_INFRA_USB_FRMCNT_O 27
-#define CK_INFRA_USB_FRMCNT_O_P1 28
-#define CK_INFRA_USB_XHCI_O 29
-#define CK_INFRA_USB_XHCI_O_P1 30
-#define CK_INFRA_USB_PIPE_O 31
-#define CK_INFRA_USB_PIPE_O_P1 32
-#define CK_INFRA_USB_UTMI_O 33
-#define CK_INFRA_USB_UTMI_O_P1 34
-#define CK_INFRA_PCIE_PIPE_OCC_P0 35
-#define CK_INFRA_PCIE_PIPE_OCC_P1 36
-#define CK_INFRA_PCIE_PIPE_OCC_P2 37
-#define CK_INFRA_PCIE_PIPE_OCC_P3 38
-#define CK_INFRA_F26M_O0 39
-#define CK_INFRA_F26M_O1 40
-#define CK_INFRA_133M_MCK 41
-#define CK_INFRA_66M_MCK 42
-#define CK_INFRA_PERI_66M_O 43
-#define CK_INFRA_USB_SYS_O 44
-#define CK_INFRA_USB_SYS_O_P1 45
-
/* INFRACFG_AO */
-#define GATE_OFFSET 65
/* mtk_mux */
-#define CK_INFRA_MUX_UART0_SEL 46 /* Linux CLK ID (0) */
-#define CK_INFRA_MUX_UART1_SEL 47 /* Linux CLK ID (1) */
-#define CK_INFRA_MUX_UART2_SEL 48 /* Linux CLK ID (2) */
-#define CK_INFRA_MUX_SPI0_SEL 49 /* Linux CLK ID (3) */
-#define CK_INFRA_MUX_SPI1_SEL 50 /* Linux CLK ID (4) */
-#define CK_INFRA_MUX_SPI2_SEL 51 /* Linux CLK ID (5) */
-#define CK_INFRA_PWM_SEL 52 /* Linux CLK ID (6) */
-#define CK_INFRA_PWM_CK1_SEL 53 /* Linux CLK ID (7) */
-#define CK_INFRA_PWM_CK2_SEL 54 /* Linux CLK ID (8) */
-#define CK_INFRA_PWM_CK3_SEL 55 /* Linux CLK ID (9) */
-#define CK_INFRA_PWM_CK4_SEL 56 /* Linux CLK ID (10) */
-#define CK_INFRA_PWM_CK5_SEL 57 /* Linux CLK ID (11) */
-#define CK_INFRA_PWM_CK6_SEL 58 /* Linux CLK ID (12) */
-#define CK_INFRA_PWM_CK7_SEL 59 /* Linux CLK ID (13) */
-#define CK_INFRA_PWM_CK8_SEL 60 /* Linux CLK ID (14) */
-#define CK_INFRA_PCIE_GFMUX_TL_O_P0_SEL 61 /* Linux CLK ID (15) */
-#define CK_INFRA_PCIE_GFMUX_TL_O_P1_SEL 62 /* Linux CLK ID (16) */
-#define CK_INFRA_PCIE_GFMUX_TL_O_P2_SEL 63 /* Linux CLK ID (17) */
-#define CK_INFRA_PCIE_GFMUX_TL_O_P3_SEL 64 /* Linux CLK ID (18) */
+#define CLK_INFRA_MUX_UART0_SEL 0
+#define CLK_INFRA_MUX_UART1_SEL 1
+#define CLK_INFRA_MUX_UART2_SEL 2
+#define CLK_INFRA_MUX_SPI0_SEL 3
+#define CLK_INFRA_MUX_SPI1_SEL 4
+#define CLK_INFRA_MUX_SPI2_SEL 5
+#define CLK_INFRA_PWM_SEL 6
+#define CLK_INFRA_PWM_CK1_SEL 7
+#define CLK_INFRA_PWM_CK2_SEL 8
+#define CLK_INFRA_PWM_CK3_SEL 9
+#define CLK_INFRA_PWM_CK4_SEL 10
+#define CLK_INFRA_PWM_CK5_SEL 11
+#define CLK_INFRA_PWM_CK6_SEL 12
+#define CLK_INFRA_PWM_CK7_SEL 13
+#define CLK_INFRA_PWM_CK8_SEL 14
+#define CLK_INFRA_PCIE_GFMUX_TL_O_P0_SEL 15
+#define CLK_INFRA_PCIE_GFMUX_TL_O_P1_SEL 16
+#define CLK_INFRA_PCIE_GFMUX_TL_O_P2_SEL 17
+#define CLK_INFRA_PCIE_GFMUX_TL_O_P3_SEL 18
+
+/* INFRACFG */
/* mtk_gate */
-#define CK_INFRA_66M_GPT_BCK (65 - GATE_OFFSET) /* Linux CLK ID (19) */
-#define CK_INFRA_66M_PWM_HCK (66 - GATE_OFFSET) /* Linux CLK ID (20) */
-#define CK_INFRA_66M_PWM_BCK (67 - GATE_OFFSET) /* Linux CLK ID (21) */
-#define CK_INFRA_66M_PWM_CK1 (68 - GATE_OFFSET) /* Linux CLK ID (22) */
-#define CK_INFRA_66M_PWM_CK2 (69 - GATE_OFFSET) /* Linux CLK ID (23) */
-#define CK_INFRA_66M_PWM_CK3 (70 - GATE_OFFSET) /* Linux CLK ID (24) */
-#define CK_INFRA_66M_PWM_CK4 (71 - GATE_OFFSET) /* Linux CLK ID (25) */
-#define CK_INFRA_66M_PWM_CK5 (72 - GATE_OFFSET) /* Linux CLK ID (26) */
-#define CK_INFRA_66M_PWM_CK6 (73 - GATE_OFFSET) /* Linux CLK ID (27) */
-#define CK_INFRA_66M_PWM_CK7 (74 - GATE_OFFSET) /* Linux CLK ID (28) */
-#define CK_INFRA_66M_PWM_CK8 (75 - GATE_OFFSET) /* Linux CLK ID (29) */
-#define CK_INFRA_133M_CQDMA_BCK (76 - GATE_OFFSET) /* Linux CLK ID (30) */
-#define CK_INFRA_66M_AUD_SLV_BCK (77 - GATE_OFFSET) /* Linux CLK ID (31) */
-#define CK_INFRA_AUD_26M (78 - GATE_OFFSET) /* Linux CLK ID (32) */
-#define CK_INFRA_AUD_L (79 - GATE_OFFSET) /* Linux CLK ID (33) */
-#define CK_INFRA_AUD_AUD (80 - GATE_OFFSET) /* Linux CLK ID (34) */
-#define CK_INFRA_AUD_EG2 (81 - GATE_OFFSET) /* Linux CLK ID (35) */
-#define CK_INFRA_DRAMC_F26M (82 - GATE_OFFSET) /* Linux CLK ID (36) */
-#define CK_INFRA_133M_DBG_ACKM (83 - GATE_OFFSET) /* Linux CLK ID (37) */
-#define CK_INFRA_66M_AP_DMA_BCK (84 - GATE_OFFSET) /* Linux CLK ID (38) */
-#define CK_INFRA_66M_SEJ_BCK (85 - GATE_OFFSET) /* Linux CLK ID (39) */
-#define CK_INFRA_PRE_CK_SEJ_F13M (86 - GATE_OFFSET) /* Linux CLK ID (40) */
-#define CK_INFRA_66M_TRNG (87 - GATE_OFFSET) /* Linux CLK ID (41) */
-#define CK_INFRA_26M_THERM_SYSTEM (88 - GATE_OFFSET) /* Linux CLK ID (42) */
-#define CK_INFRA_I2C_BCK (89 - GATE_OFFSET) /* Linux CLK ID (43) */
-#define CK_INFRA_66M_UART0_PCK (90 - GATE_OFFSET) /* Linux CLK ID (44) */
-#define CK_INFRA_66M_UART1_PCK (91 - GATE_OFFSET) /* Linux CLK ID (45) */
-#define CK_INFRA_66M_UART2_PCK (92 - GATE_OFFSET) /* Linux CLK ID (46) */
-#define CK_INFRA_52M_UART0_CK (93 - GATE_OFFSET) /* Linux CLK ID (47) */
-#define CK_INFRA_52M_UART1_CK (94 - GATE_OFFSET) /* Linux CLK ID (48) */
-#define CK_INFRA_52M_UART2_CK (95 - GATE_OFFSET) /* Linux CLK ID (49) */
-#define CK_INFRA_NFI (96 - GATE_OFFSET) /* Linux CLK ID (50) */
-#define CK_INFRA_SPINFI (97 - GATE_OFFSET) /* Linux CLK ID (51) */
-#define CK_INFRA_66M_NFI_HCK (98 - GATE_OFFSET) /* Linux CLK ID (52) */
-#define CK_INFRA_104M_SPI0 (99 - GATE_OFFSET) /* Linux CLK ID (53) */
-#define CK_INFRA_104M_SPI1 (100 - GATE_OFFSET) /* Linux CLK ID (54) */
-#define CK_INFRA_104M_SPI2_BCK (101 - GATE_OFFSET) /* Linux CLK ID (55) */
-#define CK_INFRA_66M_SPI0_HCK (102 - GATE_OFFSET) /* Linux CLK ID (56) */
-#define CK_INFRA_66M_SPI1_HCK (103 - GATE_OFFSET) /* Linux CLK ID (57) */
-#define CK_INFRA_66M_SPI2_HCK (104 - GATE_OFFSET) /* Linux CLK ID (58) */
-#define CK_INFRA_66M_FLASHIF_AXI (105 - GATE_OFFSET) /* Linux CLK ID (59) */
-#define CK_INFRA_RTC (106 - GATE_OFFSET) /* Linux CLK ID (60) */
-#define CK_INFRA_26M_ADC_BCK (107 - GATE_OFFSET) /* Linux CLK ID (61) */
-#define CK_INFRA_RC_ADC (108 - GATE_OFFSET) /* Linux CLK ID (62) */
-#define CK_INFRA_MSDC400 (109 - GATE_OFFSET) /* Linux CLK ID (63) */
-#define CK_INFRA_MSDC2_HCK (110 - GATE_OFFSET) /* Linux CLK ID (64) */
-#define CK_INFRA_133M_MSDC_0_HCK (111 - GATE_OFFSET) /* Linux CLK ID (65) */
-#define CK_INFRA_66M_MSDC_0_HCK (112 - GATE_OFFSET) /* Linux CLK ID (66) */
-#define CK_INFRA_133M_CPUM_BCK (113 - GATE_OFFSET) /* Linux CLK ID (67) */
-#define CK_INFRA_BIST2FPC (114 - GATE_OFFSET) /* Linux CLK ID (68) */
-#define CK_INFRA_I2C_X16W_MCK_CK_P1 (115 - GATE_OFFSET) /* Linux CLK ID (69) */
-#define CK_INFRA_I2C_X16W_PCK_CK_P1 (116 - GATE_OFFSET) /* Linux CLK ID (70) */
-#define CK_INFRA_133M_USB_HCK (117 - GATE_OFFSET) /* Linux CLK ID (71) */
-#define CK_INFRA_133M_USB_HCK_CK_P1 (118 - GATE_OFFSET) /* Linux CLK ID (72) */
-#define CK_INFRA_66M_USB_HCK (119 - GATE_OFFSET) /* Linux CLK ID (73) */
-#define CK_INFRA_66M_USB_HCK_CK_P1 (120 - GATE_OFFSET) /* Linux CLK ID (74) */
-#define CK_INFRA_USB_SYS (121 - GATE_OFFSET) /* Linux CLK ID (75) */
-#define CK_INFRA_USB_SYS_CK_P1 (122 - GATE_OFFSET) /* Linux CLK ID (76) */
-#define CK_INFRA_USB_REF (123 - GATE_OFFSET) /* Linux CLK ID (77) */
-#define CK_INFRA_USB_CK_P1 (124 - GATE_OFFSET) /* Linux CLK ID (78) */
-#define CK_INFRA_USB_FRMCNT (125 - GATE_OFFSET) /* Linux CLK ID (79) */
-#define CK_INFRA_USB_FRMCNT_CK_P1 (126 - GATE_OFFSET) /* Linux CLK ID (80) */
-#define CK_INFRA_USB_PIPE (127 - GATE_OFFSET) /* Linux CLK ID (81) */
-#define CK_INFRA_USB_PIPE_CK_P1 (128 - GATE_OFFSET) /* Linux CLK ID (82) */
-#define CK_INFRA_USB_UTMI (129 - GATE_OFFSET) /* Linux CLK ID (83) */
-#define CK_INFRA_USB_UTMI_CK_P1 (130 - GATE_OFFSET) /* Linux CLK ID (84) */
-#define CK_INFRA_USB_XHCI (131 - GATE_OFFSET) /* Linux CLK ID (85) */
-#define CK_INFRA_USB_XHCI_CK_P1 (132 - GATE_OFFSET) /* Linux CLK ID (86) */
-#define CK_INFRA_PCIE_GFMUX_TL_P0 (133 - GATE_OFFSET) /* Linux CLK ID (87) */
-#define CK_INFRA_PCIE_GFMUX_TL_P1 (134 - GATE_OFFSET) /* Linux CLK ID (88) */
-#define CK_INFRA_PCIE_GFMUX_TL_P2 (135 - GATE_OFFSET) /* Linux CLK ID (89) */
-#define CK_INFRA_PCIE_GFMUX_TL_P3 (136 - GATE_OFFSET) /* Linux CLK ID (90) */
-#define CK_INFRA_PCIE_PIPE_P0 (137 - GATE_OFFSET) /* Linux CLK ID (91) */
-#define CK_INFRA_PCIE_PIPE_P1 (138 - GATE_OFFSET) /* Linux CLK ID (92) */
-#define CK_INFRA_PCIE_PIPE_P2 (139 - GATE_OFFSET) /* Linux CLK ID (93) */
-#define CK_INFRA_PCIE_PIPE_P3 (140 - GATE_OFFSET) /* Linux CLK ID (94) */
-#define CK_INFRA_133M_PCIE_CK_P0 (141 - GATE_OFFSET) /* Linux CLK ID (95) */
-#define CK_INFRA_133M_PCIE_CK_P1 (142 - GATE_OFFSET) /* Linux CLK ID (96) */
-#define CK_INFRA_133M_PCIE_CK_P2 (143 - GATE_OFFSET) /* Linux CLK ID (97) */
-#define CK_INFRA_133M_PCIE_CK_P3 (144 - GATE_OFFSET) /* Linux CLK ID (98) */
-#define CK_INFRA_PCIE_PERI_26M_CK_P0 (145 - GATE_OFFSET) /* Linux CLK ID (99) */
-#define CK_INFRA_PCIE_PERI_26M_CK_P1 \
- (146 - GATE_OFFSET) /* Linux CLK ID (100) */
-#define CK_INFRA_PCIE_PERI_26M_CK_P2 \
- (147 - GATE_OFFSET) /* Linux CLK ID (101) */
-#define CK_INFRA_PCIE_PERI_26M_CK_P3 \
- (148 - GATE_OFFSET) /* Linux CLK ID (102) */
+#define CLK_INFRA_PCIE_PERI_26M_CK_P0 19
+#define CLK_INFRA_PCIE_PERI_26M_CK_P1 20
+#define CLK_INFRA_PCIE_PERI_26M_CK_P2 21
+#define CLK_INFRA_PCIE_PERI_26M_CK_P3 22
+#define CLK_INFRA_66M_GPT_BCK 23
+#define CLK_INFRA_66M_PWM_HCK 24
+#define CLK_INFRA_66M_PWM_BCK 25
+#define CLK_INFRA_66M_PWM_CK1 26
+#define CLK_INFRA_66M_PWM_CK2 27
+#define CLK_INFRA_66M_PWM_CK3 28
+#define CLK_INFRA_66M_PWM_CK4 29
+#define CLK_INFRA_66M_PWM_CK5 30
+#define CLK_INFRA_66M_PWM_CK6 31
+#define CLK_INFRA_66M_PWM_CK7 32
+#define CLK_INFRA_66M_PWM_CK8 33
+#define CLK_INFRA_133M_CQDMA_BCK 34
+#define CLK_INFRA_66M_AUD_SLV_BCK 35
+#define CLK_INFRA_AUD_26M 36
+#define CLK_INFRA_AUD_L 37
+#define CLK_INFRA_AUD_AUD 38
+#define CLK_INFRA_AUD_EG2 39
+#define CLK_INFRA_DRAMC_F26M 40
+#define CLK_INFRA_133M_DBG_ACKM 41
+#define CLK_INFRA_66M_AP_DMA_BCK 42
+#define CLK_INFRA_66M_SEJ_BCK 43
+#define CLK_INFRA_PRE_CK_SEJ_F13M 44
+/* #define CLK_INFRA_66M_TRNG 44 */
+#define CLK_INFRA_26M_THERM_SYSTEM 45
+#define CLK_INFRA_I2C_BCK 46
+/* #define CLK_INFRA_66M_UART0_PCK 46 */
+/* #define CLK_INFRA_66M_UART1_PCK 47 */
+/* #define CLK_INFRA_66M_UART2_PCK 48 */
+#define CLK_INFRA_52M_UART0_CK 47
+#define CLK_INFRA_52M_UART1_CK 48
+#define CLK_INFRA_52M_UART2_CK 49
+#define CLK_INFRA_NFI 50
+#define CLK_INFRA_SPINFI 51
+#define CLK_INFRA_66M_NFI_HCK 52
+#define CLK_INFRA_104M_SPI0 53
+#define CLK_INFRA_104M_SPI1 54
+#define CLK_INFRA_104M_SPI2_BCK 55
+#define CLK_INFRA_66M_SPI0_HCK 56
+#define CLK_INFRA_66M_SPI1_HCK 57
+#define CLK_INFRA_66M_SPI2_HCK 58
+#define CLK_INFRA_66M_FLASHIF_AXI 59
+#define CLK_INFRA_RTC 60
+#define CLK_INFRA_26M_ADC_BCK 61
+#define CLK_INFRA_RC_ADC 62
+#define CLK_INFRA_MSDC400 63
+#define CLK_INFRA_MSDC2_HCK 64
+#define CLK_INFRA_133M_MSDC_0_HCK 65
+#define CLK_INFRA_66M_MSDC_0_HCK 66
+#define CLK_INFRA_133M_CPUM_BCK 67
+#define CLK_INFRA_BIST2FPC 68
+#define CLK_INFRA_I2C_X16W_MCK_CK_P1 69
+#define CLK_INFRA_I2C_X16W_PCK_CK_P1 70
+#define CLK_INFRA_133M_USB_HCK 71
+#define CLK_INFRA_133M_USB_HCK_CK_P1 72
+#define CLK_INFRA_66M_USB_HCK 73
+#define CLK_INFRA_66M_USB_HCK_CK_P1 74
+#define CLK_INFRA_USB_SYS 75
+#define CLK_INFRA_USB_SYS_CK_P1 76
+#define CLK_INFRA_USB_REF 77
+#define CLK_INFRA_USB_CK_P1 78
+#define CLK_INFRA_USB_FRMCNT 79
+#define CLK_INFRA_USB_FRMCNT_CK_P1 80
+#define CLK_INFRA_USB_PIPE 81
+#define CLK_INFRA_USB_PIPE_CK_P1 82
+#define CLK_INFRA_USB_UTMI 83
+#define CLK_INFRA_USB_UTMI_CK_P1 84
+#define CLK_INFRA_USB_XHCI 85
+#define CLK_INFRA_USB_XHCI_CK_P1 86
+#define CLK_INFRA_PCIE_GFMUX_TL_P0 87
+#define CLK_INFRA_PCIE_GFMUX_TL_P1 88
+#define CLK_INFRA_PCIE_GFMUX_TL_P2 89
+#define CLK_INFRA_PCIE_GFMUX_TL_P3 90
+#define CLK_INFRA_PCIE_PIPE_P0 91
+#define CLK_INFRA_PCIE_PIPE_P1 92
+#define CLK_INFRA_PCIE_PIPE_P2 93
+#define CLK_INFRA_PCIE_PIPE_P3 94
+#define CLK_INFRA_133M_PCIE_CK_P0 95
+#define CLK_INFRA_133M_PCIE_CK_P1 96
+#define CLK_INFRA_133M_PCIE_CK_P2 97
+#define CLK_INFRA_133M_PCIE_CK_P3 98
/* TOPCKGEN */
+/* mtk_fixed_clk */
+#define CLK_TOP_XTAL 0
/* mtk_fixed_factor */
-#define CK_TOP_CB_CKSQ_40M 0 /* Linux CLK ID (74) */
-#define CK_TOP_CB_M_416M 1 /* Linux CLK ID (75) */
-#define CK_TOP_CB_M_D2 2 /* Linux CLK ID (76) */
-#define CK_TOP_M_D3_D2 3 /* Linux CLK ID (77) */
-#define CK_TOP_CB_M_D4 4 /* Linux CLK ID (78) */
-#define CK_TOP_CB_M_D8 5 /* Linux CLK ID (79) */
-#define CK_TOP_M_D8_D2 6 /* Linux CLK ID (80) */
-#define CK_TOP_CB_MM_720M 7 /* Linux CLK ID (81) */
-#define CK_TOP_CB_MM_D2 8 /* Linux CLK ID (82) */
-#define CK_TOP_CB_MM_D3_D5 9 /* Linux CLK ID (83) */
-#define CK_TOP_CB_MM_D4 10 /* Linux CLK ID (84) */
-#define CK_TOP_MM_D6_D2 11 /* Linux CLK ID (85) */
-#define CK_TOP_CB_MM_D8 12 /* Linux CLK ID (86) */
-#define CK_TOP_CB_APLL2_196M 13 /* Linux CLK ID (87) */
-#define CK_TOP_CB_APLL2_D4 14 /* Linux CLK ID (88) */
-#define CK_TOP_CB_NET1_D4 15 /* Linux CLK ID (89) */
-#define CK_TOP_CB_NET1_D5 16 /* Linux CLK ID (90) */
-#define CK_TOP_NET1_D5_D2 17 /* Linux CLK ID (91) */
-#define CK_TOP_NET1_D5_D4 18 /* Linux CLK ID (92) */
-#define CK_TOP_CB_NET1_D8 19 /* Linux CLK ID (93) */
-#define CK_TOP_NET1_D8_D2 20 /* Linux CLK ID (94) */
-#define CK_TOP_NET1_D8_D4 21 /* Linux CLK ID (95) */
-#define CK_TOP_NET1_D8_D8 22 /* Linux CLK ID (96) */
-#define CK_TOP_NET1_D8_D16 23 /* Linux CLK ID (97) */
-#define CK_TOP_CB_NET2_800M 24 /* Linux CLK ID (98) */
-#define CK_TOP_CB_NET2_D2 25 /* Linux CLK ID (99) */
-#define CK_TOP_CB_NET2_D4 26 /* Linux CLK ID (100) */
-#define CK_TOP_NET2_D4_D4 27 /* Linux CLK ID (101) */
-#define CK_TOP_NET2_D4_D8 28 /* Linux CLK ID (102) */
-#define CK_TOP_CB_NET2_D6 29 /* Linux CLK ID (103) */
-#define CK_TOP_CB_NET2_D8 30 /* Linux CLK ID (104) */
-#define CK_TOP_CB_WEDMCU_208M 31 /* Linux CLK ID (105) */
-#define CK_TOP_CB_SGM_325M 32 /* Linux CLK ID (106) */
-#define CK_TOP_CB_NETSYS_850M 33 /* Linux CLK ID (107) */
-#define CK_TOP_CB_MSDC_400M 34 /* Linux CLK ID (108) */
-#define CK_TOP_CKSQ_40M_D2 35 /* Linux CLK ID (109) */
-#define CK_TOP_CB_RTC_32K 36 /* Linux CLK ID (110) */
-#define CK_TOP_CB_RTC_32P7K 37 /* Linux CLK ID (111) */
-#define CK_TOP_INFRA_F32K 38 /* Linux CLK ID (112) */
-#define CK_TOP_CKSQ_SRC 39 /* Linux CLK ID (113) */
-#define CK_TOP_NETSYS_2X 40 /* Linux CLK ID (114) */
-#define CK_TOP_NETSYS_GSW 41 /* Linux CLK ID (115) */
-#define CK_TOP_NETSYS_WED_MCU 42 /* Linux CLK ID (116) */
-#define CK_TOP_EIP197 43 /* Linux CLK ID (117) */
-#define CK_TOP_EMMC_250M 44 /* Linux CLK ID (118) */
-#define CK_TOP_EMMC_400M 45 /* Linux CLK ID (119) */
-#define CK_TOP_SPI 46 /* Linux CLK ID (120) */
-#define CK_TOP_SPIM_MST 47 /* Linux CLK ID (121) */
-#define CK_TOP_NFI1X 48 /* Linux CLK ID (122) */
-#define CK_TOP_SPINFI_BCK 49 /* Linux CLK ID (123) */
-#define CK_TOP_I2C_BCK 50 /* Linux CLK ID (124) */
-#define CK_TOP_USB_SYS 51 /* Linux CLK ID (125) */
-#define CK_TOP_USB_SYS_P1 52 /* Linux CLK ID (126) */
-#define CK_TOP_USB_XHCI 53 /* Linux CLK ID (127) */
-#define CK_TOP_USB_XHCI_P1 54 /* Linux CLK ID (128) */
-#define CK_TOP_USB_FRMCNT 55 /* Linux CLK ID (129) */
-#define CK_TOP_USB_FRMCNT_P1 56 /* Linux CLK ID (130) */
-#define CK_TOP_AUD 57 /* Linux CLK ID (131) */
-#define CK_TOP_A1SYS 58 /* Linux CLK ID (132) */
-#define CK_TOP_AUD_L 59 /* Linux CLK ID (133) */
-#define CK_TOP_A_TUNER 60 /* Linux CLK ID (134) */
-#define CK_TOP_SYSAXI 61 /* Linux CLK ID (135) */
-#define CK_TOP_INFRA_F26M 62 /* Linux CLK ID (136) */
-#define CK_TOP_USB_REF 63 /* Linux CLK ID (137) */
-#define CK_TOP_USB_CK_P1 64 /* Linux CLK ID (138) */
+#define CLK_TOP_XTAL_D2 1
+#define CLK_TOP_RTC_32K 2
+#define CLK_TOP_RTC_32P7K 3
+#define CLK_TOP_MPLL_D2 4
+#define CLK_TOP_MPLL_D3_D2 5
+#define CLK_TOP_MPLL_D4 6
+#define CLK_TOP_MPLL_D8 7
+#define CLK_TOP_MPLL_D8_D2 8
+#define CLK_TOP_MMPLL_D2 9
+#define CLK_TOP_MMPLL_D3_D5 10
+#define CLK_TOP_MMPLL_D4 11
+#define CLK_TOP_MMPLL_D6_D2 12
+#define CLK_TOP_MMPLL_D8 13
+#define CLK_TOP_APLL2_D4 14
+#define CLK_TOP_NET1PLL_D4 15
+#define CLK_TOP_NET1PLL_D5 16
+#define CLK_TOP_NET1PLL_D5_D2 17
+#define CLK_TOP_NET1PLL_D5_D4 18
+#define CLK_TOP_NET1PLL_D8 19
+#define CLK_TOP_NET1PLL_D8_D2 20
+#define CLK_TOP_NET1PLL_D8_D4 21
+#define CLK_TOP_NET1PLL_D8_D8 22
+#define CLK_TOP_NET1PLL_D8_D16 23
+#define CLK_TOP_NET2PLL_D2 24
+#define CLK_TOP_NET2PLL_D4 25
+#define CLK_TOP_NET2PLL_D4_D4 26
+#define CLK_TOP_NET2PLL_D4_D8 27
+#define CLK_TOP_NET2PLL_D6 28
+#define CLK_TOP_NET2PLL_D8 29
/* mtk_mux */
-#define CK_TOP_NETSYS_SEL 65 /* Linux CLK ID (0) */
-#define CK_TOP_NETSYS_500M_SEL 66 /* Linux CLK ID (1) */
-#define CK_TOP_NETSYS_2X_SEL 67 /* Linux CLK ID (2) */
-#define CK_TOP_NETSYS_GSW_SEL 68 /* Linux CLK ID (3) */
-#define CK_TOP_ETH_GMII_SEL 69 /* Linux CLK ID (4) */
-#define CK_TOP_NETSYS_MCU_SEL 70 /* Linux CLK ID (5) */
-#define CK_TOP_NETSYS_PAO_2X_SEL 71 /* Linux CLK ID (6) */
-#define CK_TOP_EIP197_SEL 72 /* Linux CLK ID (7) */
-#define CK_TOP_AXI_INFRA_SEL 73 /* Linux CLK ID (8) */
-#define CK_TOP_UART_SEL 74 /* Linux CLK ID (9) */
-#define CK_TOP_EMMC_250M_SEL 75 /* Linux CLK ID (10) */
-#define CK_TOP_EMMC_400M_SEL 76 /* Linux CLK ID (11) */
-#define CK_TOP_SPI_SEL 77 /* Linux CLK ID (12) */
-#define CK_TOP_SPIM_MST_SEL 78 /* Linux CLK ID (13) */
-#define CK_TOP_NFI1X_SEL 79 /* Linux CLK ID (14) */
-#define CK_TOP_SPINFI_SEL 80 /* Linux CLK ID (15) */
-#define CK_TOP_PWM_SEL 81 /* Linux CLK ID (16) */
-#define CK_TOP_I2C_SEL 82 /* Linux CLK ID (17) */
-#define CK_TOP_PCIE_MBIST_250M_SEL 83 /* Linux CLK ID (18) */
-#define CK_TOP_PEXTP_TL_SEL 84 /* Linux CLK ID (19) */
-#define CK_TOP_PEXTP_TL_P1_SEL 85 /* Linux CLK ID (20) */
-#define CK_TOP_PEXTP_TL_P2_SEL 86 /* Linux CLK ID (21) */
-#define CK_TOP_PEXTP_TL_P3_SEL 87 /* Linux CLK ID (22) */
-#define CK_TOP_USB_SYS_SEL 88 /* Linux CLK ID (23) */
-#define CK_TOP_USB_SYS_P1_SEL 89 /* Linux CLK ID (24) */
-#define CK_TOP_USB_XHCI_SEL 90 /* Linux CLK ID (25) */
-#define CK_TOP_USB_XHCI_P1_SEL 91 /* Linux CLK ID (26) */
-#define CK_TOP_USB_FRMCNT_SEL 92 /* Linux CLK ID (27) */
-#define CK_TOP_USB_FRMCNT_P1_SEL 93 /* Linux CLK ID (28) */
-#define CK_TOP_AUD_SEL 94 /* Linux CLK ID (29) */
-#define CK_TOP_A1SYS_SEL 95 /* Linux CLK ID (30) */
-#define CK_TOP_AUD_L_SEL 96 /* Linux CLK ID (31) */
-#define CK_TOP_A_TUNER_SEL 97 /* Linux CLK ID (32) */
-#define CK_TOP_SSPXTP_SEL 98 /* Linux CLK ID (33) */
-#define CK_TOP_USB_PHY_SEL 99 /* Linux CLK ID (34) */
-#define CK_TOP_USXGMII_SBUS_0_SEL 100 /* Linux CLK ID (35) */
-#define CK_TOP_USXGMII_SBUS_1_SEL 101 /* Linux CLK ID (36) */
-#define CK_TOP_SGM_0_SEL 102 /* Linux CLK ID (37) */
-#define CK_TOP_SGM_SBUS_0_SEL 103 /* Linux CLK ID (38) */
-#define CK_TOP_SGM_1_SEL 104 /* Linux CLK ID (39) */
-#define CK_TOP_SGM_SBUS_1_SEL 105 /* Linux CLK ID (40) */
-#define CK_TOP_XFI_PHY_0_XTAL_SEL 106 /* Linux CLK ID (41) */
-#define CK_TOP_XFI_PHY_1_XTAL_SEL 107 /* Linux CLK ID (42) */
-#define CK_TOP_SYSAXI_SEL 108 /* Linux CLK ID (43) */
-#define CK_TOP_SYSAPB_SEL 109 /* Linux CLK ID (44) */
-#define CK_TOP_ETH_REFCK_50M_SEL 110 /* Linux CLK ID (45) */
-#define CK_TOP_ETH_SYS_200M_SEL 111 /* Linux CLK ID (46) */
-#define CK_TOP_ETH_SYS_SEL 112 /* Linux CLK ID (47) */
-#define CK_TOP_ETH_XGMII_SEL 113 /* Linux CLK ID (48) */
-#define CK_TOP_BUS_TOPS_SEL 114 /* Linux CLK ID (49) */
-#define CK_TOP_NPU_TOPS_SEL 115 /* Linux CLK ID (50) */
-#define CK_TOP_DRAMC_SEL 116 /* Linux CLK ID (51) */
-#define CK_TOP_DRAMC_MD32_SEL 117 /* Linux CLK ID (52) */
-#define CK_TOP_INFRA_F26M_SEL 118 /* Linux CLK ID (53) */
-#define CK_TOP_PEXTP_P0_SEL 119 /* Linux CLK ID (54) */
-#define CK_TOP_PEXTP_P1_SEL 120 /* Linux CLK ID (55) */
-#define CK_TOP_PEXTP_P2_SEL 121 /* Linux CLK ID (56) */
-#define CK_TOP_PEXTP_P3_SEL 122 /* Linux CLK ID (57) */
-#define CK_TOP_DA_XTP_GLB_P0_SEL 123 /* Linux CLK ID (58) */
-#define CK_TOP_DA_XTP_GLB_P1_SEL 124 /* Linux CLK ID (59) */
-#define CK_TOP_DA_XTP_GLB_P2_SEL 125 /* Linux CLK ID (60) */
-#define CK_TOP_DA_XTP_GLB_P3_SEL 126 /* Linux CLK ID (61) */
-#define CK_TOP_CKM_SEL 127 /* Linux CLK ID (62) */
-#define CK_TOP_DA_SELM_XTAL_SEL 128 /* Linux CLK ID (63) */
-#define CK_TOP_PEXTP_SEL 129 /* Linux CLK ID (64) */
-#define CK_TOP_TOPS_P2_26M_SEL 130 /* Linux CLK ID (65) */
-#define CK_TOP_MCUSYS_BACKUP_625M_SEL 131 /* Linux CLK ID (66) */
-#define CK_TOP_NETSYS_SYNC_250M_SEL 132 /* Linux CLK ID (67) */
-#define CK_TOP_MACSEC_SEL 133 /* Linux CLK ID (68) */
-#define CK_TOP_NETSYS_TOPS_400M_SEL 134 /* Linux CLK ID (69) */
-#define CK_TOP_NETSYS_PPEFB_250M_SEL 135 /* Linux CLK ID (70) */
-#define CK_TOP_NETSYS_WARP_SEL 136 /* Linux CLK ID (71) */
-#define CK_TOP_ETH_MII_SEL 137 /* Linux CLK ID (72) */
-#define CK_TOP_CK_NPU_SEL_CM_TOPS_SEL 138 /* Linux CLK ID (73) */
+#define CLK_TOP_NETSYS_SEL 30
+#define CLK_TOP_NETSYS_500M_SEL 31
+#define CLK_TOP_NETSYS_2X_SEL 32
+#define CLK_TOP_NETSYS_GSW_SEL 33
+#define CLK_TOP_ETH_GMII_SEL 34
+#define CLK_TOP_NETSYS_MCU_SEL 35
+#define CLK_TOP_NETSYS_PAO_2X_SEL 36
+#define CLK_TOP_EIP197_SEL 37
+#define CLK_TOP_AXI_INFRA_SEL 38
+#define CLK_TOP_UART_SEL 39
+#define CLK_TOP_EMMC_250M_SEL 40
+#define CLK_TOP_EMMC_400M_SEL 41
+#define CLK_TOP_SPI_SEL 42
+#define CLK_TOP_SPIM_MST_SEL 43
+#define CLK_TOP_NFI1X_SEL 44
+#define CLK_TOP_SPINFI_SEL 45
+#define CLK_TOP_PWM_SEL 46
+#define CLK_TOP_I2C_SEL 47
+#define CLK_TOP_PCIE_MBIST_250M_SEL 48
+#define CLK_TOP_PEXTP_TL_SEL 49
+#define CLK_TOP_PEXTP_TL_P1_SEL 50
+#define CLK_TOP_PEXTP_TL_P2_SEL 51
+#define CLK_TOP_PEXTP_TL_P3_SEL 52
+#define CLK_TOP_USB_SYS_SEL 53
+#define CLK_TOP_USB_SYS_P1_SEL 54
+#define CLK_TOP_USB_XHCI_SEL 55
+#define CLK_TOP_USB_XHCI_P1_SEL 56
+#define CLK_TOP_USB_FRMCNT_SEL 57
+#define CLK_TOP_USB_FRMCNT_P1_SEL 58
+#define CLK_TOP_AUD_SEL 59
+#define CLK_TOP_A1SYS_SEL 60
+#define CLK_TOP_AUD_L_SEL 61
+#define CLK_TOP_A_TUNER_SEL 62
+#define CLK_TOP_SSPXTP_SEL 63
+#define CLK_TOP_USB_PHY_SEL 64
+#define CLK_TOP_USXGMII_SBUS_0_SEL 65
+#define CLK_TOP_USXGMII_SBUS_1_SEL 66
+#define CLK_TOP_SGM_0_SEL 67
+#define CLK_TOP_SGM_SBUS_0_SEL 68
+#define CLK_TOP_SGM_1_SEL 69
+#define CLK_TOP_SGM_SBUS_1_SEL 70
+#define CLK_TOP_XFI_PHY_0_XTAL_SEL 71
+#define CLK_TOP_XFI_PHY_1_XTAL_SEL 72
+#define CLK_TOP_SYSAXI_SEL 73
+#define CLK_TOP_SYSAPB_SEL 74
+#define CLK_TOP_ETH_REFCK_50M_SEL 75
+#define CLK_TOP_ETH_SYS_200M_SEL 76
+#define CLK_TOP_ETH_SYS_SEL 77
+#define CLK_TOP_ETH_XGMII_SEL 78
+#define CLK_TOP_BUS_TOPS_SEL 79
+#define CLK_TOP_NPU_TOPS_SEL 80
+#define CLK_TOP_DRAMC_SEL 81
+#define CLK_TOP_DRAMC_MD32_SEL 82
+#define CLK_TOP_INFRA_F26M_SEL 83
+#define CLK_TOP_PEXTP_P0_SEL 84
+#define CLK_TOP_PEXTP_P1_SEL 85
+#define CLK_TOP_PEXTP_P2_SEL 86
+#define CLK_TOP_PEXTP_P3_SEL 87
+#define CLK_TOP_DA_XTP_GLB_P0_SEL 88
+#define CLK_TOP_DA_XTP_GLB_P1_SEL 89
+#define CLK_TOP_DA_XTP_GLB_P2_SEL 90
+#define CLK_TOP_DA_XTP_GLB_P3_SEL 91
+#define CLK_TOP_CKM_SEL 92
+#define CLK_TOP_DA_SEL 93
+#define CLK_TOP_PEXTP_SEL 94
+#define CLK_TOP_TOPS_P2_26M_SEL 95
+#define CLK_TOP_MCUSYS_BACKUP_625M_SEL 96
+#define CLK_TOP_NETSYS_SYNC_250M_SEL 97
+#define CLK_TOP_MACSEC_SEL 98
+#define CLK_TOP_NETSYS_TOPS_400M_SEL 99
+#define CLK_TOP_NETSYS_PPEFB_250M_SEL 100
+#define CLK_TOP_NETSYS_WARP_SEL 101
+#define CLK_TOP_ETH_MII_SEL 102
+#define CLK_TOP_NPU_SEL 103
/* APMIXEDSYS */
/* mtk_pll_data */
-#define CK_APMIXED_NETSYSPLL 0
-#define CK_APMIXED_MPLL 1
-#define CK_APMIXED_MMPLL 2
-#define CK_APMIXED_APLL2 3
-#define CK_APMIXED_NET1PLL 4
-#define CK_APMIXED_NET2PLL 5
-#define CK_APMIXED_WEDMCUPLL 6
-#define CK_APMIXED_SGMPLL 7
-#define CK_APMIXED_ARM_B 8
-#define CK_APMIXED_CCIPLL2_B 9
-#define CK_APMIXED_USXGMIIPLL 10
-#define CK_APMIXED_MSDCPLL 11
+#define CLK_APMIXED_NETSYSPLL 0
+#define CLK_APMIXED_MPLL 1
+#define CLK_APMIXED_MMPLL 2
+#define CLK_APMIXED_APLL2 3
+#define CLK_APMIXED_NET1PLL 4
+#define CLK_APMIXED_NET2PLL 5
+#define CLK_APMIXED_WEDMCUPLL 6
+#define CLK_APMIXED_SGMPLL 7
+#define CLK_APMIXED_ARM_B 8
+#define CLK_APMIXED_CCIPLL2_B 9
+#define CLK_APMIXED_USXGMIIPLL 10
+#define CLK_APMIXED_MSDCPLL 11
/* ETHSYS ETH DMA */
/* mtk_gate */
-#define CK_ETHDMA_FE_EN 0
+#define CLK_ETHDMA_FE_EN 0
/* SGMIISYS_0 */
/* mtk_gate */
-#define CK_SGM0_TX_EN 0
-#define CK_SGM0_RX_EN 1
+#define CLK_SGM0_TX_EN 0
+#define CLK_SGM0_RX_EN 1
/* SGMIISYS_1 */
/* mtk_gate */
-#define CK_SGM1_TX_EN 0
-#define CK_SGM1_RX_EN 1
+#define CLK_SGM1_TX_EN 0
+#define CLK_SGM1_RX_EN 1
/* ETHWARP */
/* mtk_gate */
-#define CK_ETHWARP_WOCPU2_EN 0
-#define CK_ETHWARP_WOCPU1_EN 1
-#define CK_ETHWARP_WOCPU0_EN 2
+#define CLK_ETHWARP_WOCPU2_EN 0
+#define CLK_ETHWARP_WOCPU1_EN 1
+#define CLK_ETHWARP_WOCPU0_EN 2
#endif /* _DT_BINDINGS_CLK_MT7988_H */
diff --git a/include/dt-bindings/clock/px30-cru.h b/include/dt-bindings/clock/px30-cru.h
deleted file mode 100644
index e5e5969..0000000
--- a/include/dt-bindings/clock/px30-cru.h
+++ /dev/null
@@ -1,389 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2017 Rockchip Electronics Co. Ltd.
- * Author: Elaine <zhangqing@rock-chips.com>
- */
-
-#ifndef _DT_BINDINGS_CLK_ROCKCHIP_PX30_H
-#define _DT_BINDINGS_CLK_ROCKCHIP_PX30_H
-
-/* core clocks */
-#define PLL_APLL 1
-#define PLL_DPLL 2
-#define PLL_CPLL 3
-#define PLL_NPLL 4
-#define APLL_BOOST_H 5
-#define APLL_BOOST_L 6
-#define ARMCLK 7
-
-/* sclk gates (special clocks) */
-#define USB480M 14
-#define SCLK_PDM 15
-#define SCLK_I2S0_TX 16
-#define SCLK_I2S0_TX_OUT 17
-#define SCLK_I2S0_RX 18
-#define SCLK_I2S0_RX_OUT 19
-#define SCLK_I2S1 20
-#define SCLK_I2S1_OUT 21
-#define SCLK_I2S2 22
-#define SCLK_I2S2_OUT 23
-#define SCLK_UART1 24
-#define SCLK_UART2 25
-#define SCLK_UART3 26
-#define SCLK_UART4 27
-#define SCLK_UART5 28
-#define SCLK_I2C0 29
-#define SCLK_I2C1 30
-#define SCLK_I2C2 31
-#define SCLK_I2C3 32
-#define SCLK_I2C4 33
-#define SCLK_PWM0 34
-#define SCLK_PWM1 35
-#define SCLK_SPI0 36
-#define SCLK_SPI1 37
-#define SCLK_TIMER0 38
-#define SCLK_TIMER1 39
-#define SCLK_TIMER2 40
-#define SCLK_TIMER3 41
-#define SCLK_TIMER4 42
-#define SCLK_TIMER5 43
-#define SCLK_TSADC 44
-#define SCLK_SARADC 45
-#define SCLK_OTP 46
-#define SCLK_OTP_USR 47
-#define SCLK_CRYPTO 48
-#define SCLK_CRYPTO_APK 49
-#define SCLK_DDRC 50
-#define SCLK_ISP 51
-#define SCLK_CIF_OUT 52
-#define SCLK_RGA_CORE 53
-#define SCLK_VOPB_PWM 54
-#define SCLK_NANDC 55
-#define SCLK_SDIO 56
-#define SCLK_EMMC 57
-#define SCLK_SFC 58
-#define SCLK_SDMMC 59
-#define SCLK_OTG_ADP 60
-#define SCLK_GMAC_SRC 61
-#define SCLK_GMAC 62
-#define SCLK_GMAC_RX_TX 63
-#define SCLK_MAC_REF 64
-#define SCLK_MAC_REFOUT 65
-#define SCLK_MAC_OUT 66
-#define SCLK_SDMMC_DRV 67
-#define SCLK_SDMMC_SAMPLE 68
-#define SCLK_SDIO_DRV 69
-#define SCLK_SDIO_SAMPLE 70
-#define SCLK_EMMC_DRV 71
-#define SCLK_EMMC_SAMPLE 72
-#define SCLK_GPU 73
-#define SCLK_PVTM 74
-#define SCLK_CORE_VPU 75
-#define SCLK_GMAC_RMII 76
-#define SCLK_UART2_SRC 77
-#define SCLK_NANDC_DIV 78
-#define SCLK_NANDC_DIV50 79
-#define SCLK_SDIO_DIV 80
-#define SCLK_SDIO_DIV50 81
-#define SCLK_EMMC_DIV 82
-#define SCLK_EMMC_DIV50 83
-
-/* dclk gates */
-#define DCLK_VOPB 150
-#define DCLK_VOPL 151
-
-/* aclk gates */
-#define ACLK_GPU 170
-#define ACLK_BUS_PRE 171
-#define ACLK_CRYPTO 172
-#define ACLK_VI_PRE 173
-#define ACLK_VO_PRE 174
-#define ACLK_VPU 175
-#define ACLK_PERI_PRE 176
-#define ACLK_GMAC 178
-#define ACLK_CIF 179
-#define ACLK_ISP 180
-#define ACLK_VOPB 181
-#define ACLK_VOPL 182
-#define ACLK_RGA 183
-#define ACLK_GIC 184
-#define ACLK_DCF 186
-#define ACLK_DMAC 187
-
-/* hclk gates */
-#define HCLK_BUS_PRE 240
-#define HCLK_CRYPTO 241
-#define HCLK_VI_PRE 242
-#define HCLK_VO_PRE 243
-#define HCLK_VPU 244
-#define HCLK_PERI_PRE 245
-#define HCLK_MMC_NAND 246
-#define HCLK_SDMMC 247
-#define HCLK_USB 248
-#define HCLK_CIF 249
-#define HCLK_ISP 250
-#define HCLK_VOPB 251
-#define HCLK_VOPL 252
-#define HCLK_RGA 253
-#define HCLK_NANDC 254
-#define HCLK_SDIO 255
-#define HCLK_EMMC 256
-#define HCLK_SFC 257
-#define HCLK_OTG 258
-#define HCLK_HOST 259
-#define HCLK_HOST_ARB 260
-#define HCLK_PDM 261
-#define HCLK_I2S0 262
-#define HCLK_I2S1 263
-#define HCLK_I2S2 264
-
-/* pclk gates */
-#define PCLK_BUS_PRE 320
-#define PCLK_DDR 321
-#define PCLK_VO_PRE 322
-#define PCLK_GMAC 323
-#define PCLK_MIPI_DSI 324
-#define PCLK_MIPIDSIPHY 325
-#define PCLK_MIPICSIPHY 326
-#define PCLK_USB_GRF 327
-#define PCLK_DCF 328
-#define PCLK_UART1 329
-#define PCLK_UART2 330
-#define PCLK_UART3 331
-#define PCLK_UART4 332
-#define PCLK_UART5 333
-#define PCLK_I2C0 334
-#define PCLK_I2C1 335
-#define PCLK_I2C2 336
-#define PCLK_I2C3 337
-#define PCLK_I2C4 338
-#define PCLK_PWM0 339
-#define PCLK_PWM1 340
-#define PCLK_SPI0 341
-#define PCLK_SPI1 342
-#define PCLK_SARADC 343
-#define PCLK_TSADC 344
-#define PCLK_TIMER 345
-#define PCLK_OTP_NS 346
-#define PCLK_WDT_NS 347
-#define PCLK_GPIO1 348
-#define PCLK_GPIO2 349
-#define PCLK_GPIO3 350
-#define PCLK_ISP 351
-#define PCLK_CIF 352
-#define PCLK_OTP_PHY 353
-
-#define CLK_NR_CLKS (PCLK_OTP_PHY + 1)
-
-/* pmu-clocks indices */
-
-#define PLL_GPLL 1
-
-#define SCLK_RTC32K_PMU 4
-#define SCLK_WIFI_PMU 5
-#define SCLK_UART0_PMU 6
-#define SCLK_PVTM_PMU 7
-#define PCLK_PMU_PRE 8
-#define SCLK_REF24M_PMU 9
-#define SCLK_USBPHY_REF 10
-#define SCLK_MIPIDSIPHY_REF 11
-
-#define XIN24M_DIV 12
-
-#define PCLK_GPIO0_PMU 20
-#define PCLK_UART0_PMU 21
-
-#define CLKPMU_NR_CLKS (PCLK_UART0_PMU + 1)
-
-/* soft-reset indices */
-#define SRST_CORE0_PO 0
-#define SRST_CORE1_PO 1
-#define SRST_CORE2_PO 2
-#define SRST_CORE3_PO 3
-#define SRST_CORE0 4
-#define SRST_CORE1 5
-#define SRST_CORE2 6
-#define SRST_CORE3 7
-#define SRST_CORE0_DBG 8
-#define SRST_CORE1_DBG 9
-#define SRST_CORE2_DBG 10
-#define SRST_CORE3_DBG 11
-#define SRST_TOPDBG 12
-#define SRST_CORE_NOC 13
-#define SRST_STRC_A 14
-#define SRST_L2C 15
-
-#define SRST_DAP 16
-#define SRST_CORE_PVTM 17
-#define SRST_GPU 18
-#define SRST_GPU_NIU 19
-#define SRST_UPCTL2 20
-#define SRST_UPCTL2_A 21
-#define SRST_UPCTL2_P 22
-#define SRST_MSCH 23
-#define SRST_MSCH_P 24
-#define SRST_DDRMON_P 25
-#define SRST_DDRSTDBY_P 26
-#define SRST_DDRSTDBY 27
-#define SRST_DDRGRF_p 28
-#define SRST_AXI_SPLIT_A 29
-#define SRST_AXI_CMD_A 30
-#define SRST_AXI_CMD_P 31
-
-#define SRST_DDRPHY 32
-#define SRST_DDRPHYDIV 33
-#define SRST_DDRPHY_P 34
-#define SRST_VPU_A 36
-#define SRST_VPU_NIU_A 37
-#define SRST_VPU_H 38
-#define SRST_VPU_NIU_H 39
-#define SRST_VI_NIU_A 40
-#define SRST_VI_NIU_H 41
-#define SRST_ISP_H 42
-#define SRST_ISP 43
-#define SRST_CIF_A 44
-#define SRST_CIF_H 45
-#define SRST_CIF_PCLKIN 46
-#define SRST_MIPICSIPHY_P 47
-
-#define SRST_VO_NIU_A 48
-#define SRST_VO_NIU_H 49
-#define SRST_VO_NIU_P 50
-#define SRST_VOPB_A 51
-#define SRST_VOPB_H 52
-#define SRST_VOPB 53
-#define SRST_PWM_VOPB 54
-#define SRST_VOPL_A 55
-#define SRST_VOPL_H 56
-#define SRST_VOPL 57
-#define SRST_RGA_A 58
-#define SRST_RGA_H 59
-#define SRST_RGA 60
-#define SRST_MIPIDSI_HOST_P 61
-#define SRST_MIPIDSIPHY_P 62
-#define SRST_VPU_CORE 63
-
-#define SRST_PERI_NIU_A 64
-#define SRST_USB_NIU_H 65
-#define SRST_USB2OTG_H 66
-#define SRST_USB2OTG 67
-#define SRST_USB2OTG_ADP 68
-#define SRST_USB2HOST_H 69
-#define SRST_USB2HOST_ARB_H 70
-#define SRST_USB2HOST_AUX_H 71
-#define SRST_USB2HOST_EHCI 72
-#define SRST_USB2HOST 73
-#define SRST_USBPHYPOR 74
-#define SRST_USBPHY_OTG_PORT 75
-#define SRST_USBPHY_HOST_PORT 76
-#define SRST_USBPHY_GRF 77
-#define SRST_CPU_BOOST_P 78
-#define SRST_CPU_BOOST 79
-
-#define SRST_MMC_NAND_NIU_H 80
-#define SRST_SDIO_H 81
-#define SRST_EMMC_H 82
-#define SRST_SFC_H 83
-#define SRST_SFC 84
-#define SRST_SDCARD_NIU_H 85
-#define SRST_SDMMC_H 86
-#define SRST_NANDC_H 89
-#define SRST_NANDC 90
-#define SRST_GMAC_NIU_A 92
-#define SRST_GMAC_NIU_P 93
-#define SRST_GMAC_A 94
-
-#define SRST_PMU_NIU_P 96
-#define SRST_PMU_SGRF_P 97
-#define SRST_PMU_GRF_P 98
-#define SRST_PMU 99
-#define SRST_PMU_MEM_P 100
-#define SRST_PMU_GPIO0_P 101
-#define SRST_PMU_UART0_P 102
-#define SRST_PMU_CRU_P 103
-#define SRST_PMU_PVTM 104
-#define SRST_PMU_UART 105
-#define SRST_PMU_NIU_H 106
-#define SRST_PMU_DDR_FAIL_SAVE 107
-#define SRST_PMU_CORE_PERF_A 108
-#define SRST_PMU_CORE_GRF_P 109
-#define SRST_PMU_GPU_PERF_A 110
-#define SRST_PMU_GPU_GRF_P 111
-
-#define SRST_CRYPTO_NIU_A 112
-#define SRST_CRYPTO_NIU_H 113
-#define SRST_CRYPTO_A 114
-#define SRST_CRYPTO_H 115
-#define SRST_CRYPTO 116
-#define SRST_CRYPTO_APK 117
-#define SRST_BUS_NIU_H 120
-#define SRST_USB_NIU_P 121
-#define SRST_BUS_TOP_NIU_P 122
-#define SRST_INTMEM_A 123
-#define SRST_GIC_A 124
-#define SRST_ROM_H 126
-#define SRST_DCF_A 127
-
-#define SRST_DCF_P 128
-#define SRST_PDM_H 129
-#define SRST_PDM 130
-#define SRST_I2S0_H 131
-#define SRST_I2S0_TX 132
-#define SRST_I2S1_H 133
-#define SRST_I2S1 134
-#define SRST_I2S2_H 135
-#define SRST_I2S2 136
-#define SRST_UART1_P 137
-#define SRST_UART1 138
-#define SRST_UART2_P 139
-#define SRST_UART2 140
-#define SRST_UART3_P 141
-#define SRST_UART3 142
-#define SRST_UART4_P 143
-
-#define SRST_UART4 144
-#define SRST_UART5_P 145
-#define SRST_UART5 146
-#define SRST_I2C0_P 147
-#define SRST_I2C0 148
-#define SRST_I2C1_P 149
-#define SRST_I2C1 150
-#define SRST_I2C2_P 151
-#define SRST_I2C2 152
-#define SRST_I2C3_P 153
-#define SRST_I2C3 154
-#define SRST_PWM0_P 157
-#define SRST_PWM0 158
-#define SRST_PWM1_P 159
-
-#define SRST_PWM1 160
-#define SRST_SPI0_P 161
-#define SRST_SPI0 162
-#define SRST_SPI1_P 163
-#define SRST_SPI1 164
-#define SRST_SARADC_P 165
-#define SRST_SARADC 166
-#define SRST_TSADC_P 167
-#define SRST_TSADC 168
-#define SRST_TIMER_P 169
-#define SRST_TIMER0 170
-#define SRST_TIMER1 171
-#define SRST_TIMER2 172
-#define SRST_TIMER3 173
-#define SRST_TIMER4 174
-#define SRST_TIMER5 175
-
-#define SRST_OTP_NS_P 176
-#define SRST_OTP_NS_SBPI 177
-#define SRST_OTP_NS_USR 178
-#define SRST_OTP_PHY_P 179
-#define SRST_OTP_PHY 180
-#define SRST_WDT_NS_P 181
-#define SRST_GPIO1_P 182
-#define SRST_GPIO2_P 183
-#define SRST_GPIO3_P 184
-#define SRST_SGRF_P 185
-#define SRST_GRF_P 186
-#define SRST_I2S0_RX 191
-
-#endif
diff --git a/include/dt-bindings/clock/rockchip,rk808.h b/include/dt-bindings/clock/rockchip,rk808.h
deleted file mode 100644
index 1a87343..0000000
--- a/include/dt-bindings/clock/rockchip,rk808.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * This header provides constants clk index RK808 pmic clkout
- */
-#ifndef _CLK_ROCKCHIP_RK808
-#define _CLK_ROCKCHIP_RK808
-
-/* CLOCKOUT index */
-#define RK808_CLKOUT0 0
-#define RK808_CLKOUT1 1
-
-#endif
diff --git a/include/dt-bindings/power/px30-power.h b/include/dt-bindings/power/px30-power.h
deleted file mode 100644
index 30917a9..0000000
--- a/include/dt-bindings/power/px30-power.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __DT_BINDINGS_POWER_PX30_POWER_H__
-#define __DT_BINDINGS_POWER_PX30_POWER_H__
-
-/* VD_CORE */
-#define PX30_PD_A35_0 0
-#define PX30_PD_A35_1 1
-#define PX30_PD_A35_2 2
-#define PX30_PD_A35_3 3
-#define PX30_PD_SCU 4
-
-/* VD_LOGIC */
-#define PX30_PD_USB 5
-#define PX30_PD_DDR 6
-#define PX30_PD_SDCARD 7
-#define PX30_PD_CRYPTO 8
-#define PX30_PD_GMAC 9
-#define PX30_PD_MMC_NAND 10
-#define PX30_PD_VPU 11
-#define PX30_PD_VO 12
-#define PX30_PD_VI 13
-#define PX30_PD_GPU 14
-
-/* VD_PMU */
-#define PX30_PD_PMU 15
-
-#endif
diff --git a/include/dt-bindings/soc/rockchip,boot-mode.h b/include/dt-bindings/soc/rockchip,boot-mode.h
deleted file mode 100644
index 4b0914c..0000000
--- a/include/dt-bindings/soc/rockchip,boot-mode.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ROCKCHIP_BOOT_MODE_H
-#define __ROCKCHIP_BOOT_MODE_H
-
-/*high 24 bits is tag, low 8 bits is type*/
-#define REBOOT_FLAG 0x5242C300
-/* normal boot */
-#define BOOT_NORMAL (REBOOT_FLAG + 0)
-/* enter bootloader rockusb mode */
-#define BOOT_BL_DOWNLOAD (REBOOT_FLAG + 1)
-/* enter recovery */
-#define BOOT_RECOVERY (REBOOT_FLAG + 3)
- /* enter fastboot mode */
-#define BOOT_FASTBOOT (REBOOT_FLAG + 9)
-
-#endif
diff --git a/include/dt-bindings/soc/rockchip,vop2.h b/include/dt-bindings/soc/rockchip,vop2.h
deleted file mode 100644
index 668f199..0000000
--- a/include/dt-bindings/soc/rockchip,vop2.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
-
-#ifndef __DT_BINDINGS_ROCKCHIP_VOP2_H
-#define __DT_BINDINGS_ROCKCHIP_VOP2_H
-
-#define ROCKCHIP_VOP2_EP_RGB0 1
-#define ROCKCHIP_VOP2_EP_HDMI0 2
-#define ROCKCHIP_VOP2_EP_EDP0 3
-#define ROCKCHIP_VOP2_EP_MIPI0 4
-#define ROCKCHIP_VOP2_EP_LVDS0 5
-#define ROCKCHIP_VOP2_EP_MIPI1 6
-#define ROCKCHIP_VOP2_EP_LVDS1 7
-#define ROCKCHIP_VOP2_EP_HDMI1 8
-#define ROCKCHIP_VOP2_EP_EDP1 9
-#define ROCKCHIP_VOP2_EP_DP0 10
-#define ROCKCHIP_VOP2_EP_DP1 11
-
-#endif /* __DT_BINDINGS_ROCKCHIP_VOP2_H */
diff --git a/include/ext4fs.h b/include/ext4fs.h
index d96edfd..41f9eb8 100644
--- a/include/ext4fs.h
+++ b/include/ext4fs.h
@@ -34,12 +34,63 @@
#define EXT4_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
#define EXT4_EXTENTS_FL 0x00080000 /* Inode uses extents */
#define EXT4_EXT_MAGIC 0xf30a
-#define EXT4_FEATURE_RO_COMPAT_GDT_CSUM 0x0010
+
+#define EXT4_FEATURE_RO_COMPAT_SPARSE_SUPER 0x0001
+#define EXT4_FEATURE_RO_COMPAT_LARGE_FILE 0x0002
+#define EXT4_FEATURE_RO_COMPAT_BTREE_DIR 0x0004
+#define EXT4_FEATURE_RO_COMPAT_HUGE_FILE 0x0008
+#define EXT4_FEATURE_RO_COMPAT_GDT_CSUM 0x0010
+#define EXT4_FEATURE_RO_COMPAT_DIR_NLINK 0x0020
+#define EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE 0x0040
+#define EXT4_FEATURE_RO_COMPAT_QUOTA 0x0100
+#define EXT4_FEATURE_RO_COMPAT_BIGALLOC 0x0200
#define EXT4_FEATURE_RO_COMPAT_METADATA_CSUM 0x0400
+
+#define EXT4_FEATURE_INCOMPAT_FILETYPE 0x0002
+#define EXT4_FEATURE_INCOMPAT_RECOVER 0x0004
#define EXT4_FEATURE_INCOMPAT_EXTENTS 0x0040
#define EXT4_FEATURE_INCOMPAT_64BIT 0x0080
+#define EXT4_FEATURE_INCOMPAT_MMP 0x0100
+#define EXT4_FEATURE_INCOMPAT_FLEX_BG 0x0200
+#define EXT4_FEATURE_INCOMPAT_CSUM_SEED 0x2000
+#define EXT4_FEATURE_INCOMPAT_ENCRYPT 0x10000
+
#define EXT4_INDIRECT_BLOCKS 12
+/*
+ * Incompat features supported by this implementation.
+ */
+#define EXT4_FEATURE_INCOMPAT_SUPP (EXT4_FEATURE_INCOMPAT_FILETYPE | \
+ EXT4_FEATURE_INCOMPAT_RECOVER | \
+ EXT4_FEATURE_INCOMPAT_EXTENTS | \
+ EXT4_FEATURE_INCOMPAT_64BIT | \
+ EXT4_FEATURE_INCOMPAT_FLEX_BG)
+
+/*
+ * Incompat features supported by this implementation only in a lazy
+ * way, good enough for reading files.
+ *
+ * - Multi mount protection (mmp) is not supported, but for read-only
+ * we get away with it.
+ * - Same for metadata_csum_seed and metadata_csum.
+ * - The implementation has also no clue about fscrypt, but it can read
+ * unencrypted files. Reading encrypted files will read garbage.
+ */
+#define EXT4_FEATURE_INCOMPAT_SUPP_LAZY_RO (EXT4_FEATURE_INCOMPAT_MMP | \
+ EXT4_FEATURE_INCOMPAT_CSUM_SEED | \
+ EXT4_FEATURE_INCOMPAT_ENCRYPT)
+
+/*
+ * Read-only compat features we support.
+ * If unknown ro compat features are detected, writing to the fs is denied.
+ */
+#define EXT4_FEATURE_RO_COMPAT_SUPP (EXT4_FEATURE_RO_COMPAT_SPARSE_SUPER | \
+ EXT4_FEATURE_RO_COMPAT_LARGE_FILE | \
+ EXT4_FEATURE_RO_COMPAT_HUGE_FILE | \
+ EXT4_FEATURE_RO_COMPAT_GDT_CSUM | \
+ EXT4_FEATURE_RO_COMPAT_DIR_NLINK | \
+ EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE)
+
#define EXT4_BG_INODE_UNINIT 0x0001
#define EXT4_BG_BLOCK_UNINIT 0x0002
#define EXT4_BG_INODE_ZEROED 0x0004
diff --git a/include/i2c.h b/include/i2c.h
index 4e59009..91917f5 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -645,20 +645,8 @@
*/
#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */
-#if !defined(CFG_SYS_I2C_MAX_HOPS)
/* no muxes used bus = i2c adapters */
-#define CFG_SYS_I2C_DIRECT_BUS 1
-#define CFG_SYS_I2C_MAX_HOPS 0
#define CFG_SYS_NUM_I2C_BUSES ll_entry_count(struct i2c_adapter, i2c)
-#else
-/* we use i2c muxes */
-#undef CFG_SYS_I2C_DIRECT_BUS
-#endif
-
-/* define the I2C bus number for RTC and DTT if not already done */
-#if !defined(CFG_SYS_RTC_BUS_NUM)
-#define CFG_SYS_RTC_BUS_NUM 0
-#endif
struct i2c_adapter {
void (*init)(struct i2c_adapter *adap, int speed,
@@ -703,48 +691,13 @@
struct i2c_adapter *i2c_get_adapter(int index);
-#ifndef CFG_SYS_I2C_DIRECT_BUS
-struct i2c_mux {
- int id;
- char name[16];
-};
-
-struct i2c_next_hop {
- struct i2c_mux mux;
- uint8_t chip;
- uint8_t channel;
-};
-
-struct i2c_bus_hose {
- int adapter;
- struct i2c_next_hop next_hop[CFG_SYS_I2C_MAX_HOPS];
-};
-#define I2C_NULL_HOP {{-1, ""}, 0, 0}
-extern struct i2c_bus_hose i2c_bus[];
-
-#define I2C_ADAPTER(bus) i2c_bus[bus].adapter
-#else
#define I2C_ADAPTER(bus) bus
-#endif
#define I2C_BUS gd->cur_i2c_bus
#define I2C_ADAP_NR(bus) i2c_get_adapter(I2C_ADAPTER(bus))
#define I2C_ADAP I2C_ADAP_NR(gd->cur_i2c_bus)
#define I2C_ADAP_HWNR (I2C_ADAP->hwadapnr)
-#ifndef CFG_SYS_I2C_DIRECT_BUS
-#define I2C_MUX_PCA9540_ID 1
-#define I2C_MUX_PCA9540 {I2C_MUX_PCA9540_ID, "PCA9540B"}
-#define I2C_MUX_PCA9542_ID 2
-#define I2C_MUX_PCA9542 {I2C_MUX_PCA9542_ID, "PCA9542A"}
-#define I2C_MUX_PCA9544_ID 3
-#define I2C_MUX_PCA9544 {I2C_MUX_PCA9544_ID, "PCA9544A"}
-#define I2C_MUX_PCA9547_ID 4
-#define I2C_MUX_PCA9547 {I2C_MUX_PCA9547_ID, "PCA9547A"}
-#define I2C_MUX_PCA9548_ID 5
-#define I2C_MUX_PCA9548 {I2C_MUX_PCA9548_ID, "PCA9548"}
-#endif
-
#ifndef I2C_SOFT_DECLARATIONS
# if (defined(CONFIG_AT91RM9200) || \
defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) || \
@@ -938,66 +891,6 @@
unsigned int i2c_get_bus_speed(void);
#endif /* CONFIG_SYS_I2C_LEGACY */
-/*
- * only for backwardcompatibility, should go away if we switched
- * completely to new multibus support.
- */
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CFG_I2C_MULTI_BUS)
-# if !defined(CFG_SYS_MAX_I2C_BUS)
-# define CFG_SYS_MAX_I2C_BUS 2
-# endif
-# define I2C_MULTI_BUS 1
-#else
-# define CFG_SYS_MAX_I2C_BUS 1
-# define I2C_MULTI_BUS 0
-#endif
-
-/* NOTE: These two functions MUST be always_inline to avoid code growth! */
-static inline unsigned int I2C_GET_BUS(void) __attribute__((always_inline));
-static inline unsigned int I2C_GET_BUS(void)
-{
- return I2C_MULTI_BUS ? i2c_get_bus_num() : 0;
-}
-
-static inline void I2C_SET_BUS(unsigned int bus) __attribute__((always_inline));
-static inline void I2C_SET_BUS(unsigned int bus)
-{
- if (I2C_MULTI_BUS)
- i2c_set_bus_num(bus);
-}
-
-/* Multi I2C definitions */
-enum {
- I2C_0, I2C_1, I2C_2, I2C_3, I2C_4, I2C_5, I2C_6, I2C_7,
- I2C_8, I2C_9, I2C_10,
-};
-
-/**
- * Get FDT values for i2c bus.
- *
- * @param blob Device tree blbo
- * Return: the number of I2C bus
- */
-void board_i2c_init(const void *blob);
-
-/**
- * Find the I2C bus number by given a FDT I2C node.
- *
- * @param blob Device tree blbo
- * @param node FDT I2C node to find
- * Return: the number of I2C bus (zero based), or -1 on error
- */
-int i2c_get_bus_num_fdt(int node);
-
-/**
- * Reset the I2C bus represented by the given a FDT I2C node.
- *
- * @param blob Device tree blbo
- * @param node FDT I2C node to find
- * Return: 0 if port was reset, -1 if not found
- */
-int i2c_reset_port_fdt(const void *blob, int node);
-
#endif /* !CONFIG_DM_I2C */
#endif /* _I2C_H_ */
diff --git a/include/imx8image.h b/include/imx8image.h
index 32064bf..85fb642 100644
--- a/include/imx8image.h
+++ b/include/imx8image.h
@@ -162,6 +162,7 @@
enum imx8image_core_type {
CFG_CORE_INVALID,
CFG_SCU,
+ CFG_PWR,
CFG_M40,
CFG_M41,
CFG_A35,
diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h
index 1a30601..8b6ce9c 100644
--- a/include/linux/compiler_types.h
+++ b/include/linux/compiler_types.h
@@ -71,6 +71,13 @@
#endif
/*
+ * At least gcc 5.1 or clang 8 are needed.
+ */
+#ifndef COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW
+#error Unsupported compiler
+#endif
+
+/*
* Some architectures need to provide custom definitions of macros provided
* by linux/compiler-*.h, and can do so using asm/compiler.h. We include that
* conditionally rather than using an asm-generic wrapper in order to avoid
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 983a55c..6751fb5 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -26,6 +26,7 @@
#include <dm/device.h>
#endif
#include <dm/ofnode.h>
+#include <blk.h>
#define MAX_MTD_DEVICES 32
#endif
@@ -412,6 +413,30 @@
int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
const u_char *buf);
+#if CONFIG_IS_ENABLED(MTD_BLOCK)
+static inline struct mtd_info *blk_desc_to_mtd(struct blk_desc *bdesc)
+{
+ void *priv = dev_get_priv(bdesc->bdev);
+
+ if (!priv)
+ return NULL;
+
+ return *((struct mtd_info **)priv);
+}
+
+int mtd_bind(struct udevice *dev, struct mtd_info **mtd);
+#else
+static inline struct mtd_info *blk_desc_to_mtd(struct blk_desc *bdesc)
+{
+ return NULL;
+}
+
+static inline int mtd_bind(struct udevice *dev, struct mtd_info **mtd)
+{
+ return -EOPNOTSUPP;
+}
+#endif
+
int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops);
int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops);
diff --git a/include/os.h b/include/os.h
index 877404a..4371270 100644
--- a/include/os.h
+++ b/include/os.h
@@ -29,7 +29,7 @@
* @fd: File descriptor as returned by os_open()
* @buf: Buffer to place data
* @count: Number of bytes to read
- * Return: number of bytes read, or -1 on error
+ * Return: number of bytes read, or -errno on error
*/
ssize_t os_read(int fd, void *buf, size_t count);
@@ -39,7 +39,7 @@
* @fd: File descriptor as returned by os_open()
* @buf: Buffer containing data to write
* @count: Number of bytes to write
- * Return: number of bytes written, or -1 on error
+ * Return: number of bytes written, or -errno on error
*/
ssize_t os_write(int fd, const void *buf, size_t count);
@@ -49,7 +49,7 @@
* @fd: File descriptor as returned by os_open()
* @offset: File offset (based on whence)
* @whence: Position offset is relative to (see below)
- * Return: new file offset
+ * Return: new file offset, or -errno on error
*/
off_t os_lseek(int fd, off_t offset, int whence);
diff --git a/include/part.h b/include/part.h
index b187ec4..54b986c 100644
--- a/include/part.h
+++ b/include/part.h
@@ -30,12 +30,17 @@
#define PART_TYPE_ISO 0x03
#define PART_TYPE_AMIGA 0x04
#define PART_TYPE_EFI 0x05
+#define PART_TYPE_MTD 0x06
+#define PART_TYPE_UBI 0x07
/* maximum number of partition entries supported by search */
#define DOS_ENTRY_NUMBERS 8
#define ISO_ENTRY_NUMBERS 64
#define MAC_ENTRY_NUMBERS 64
#define AMIGA_ENTRY_NUMBERS 8
+#define MTD_ENTRY_NUMBERS 64
+#define UBI_ENTRY_NUMBERS UBI_MAX_VOLUMES
+
/*
* Type string for U-Boot bootable partitions
*/
diff --git a/include/spi.h b/include/spi.h
index 7e38cc2..9e98512 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -743,4 +743,6 @@
#define spi_get_ops(dev) ((struct dm_spi_ops *)(dev)->driver->ops)
#define spi_emul_get_ops(dev) ((struct dm_spi_emul_ops *)(dev)->driver->ops)
+int spi_get_env_dev(void);
+
#endif /* _SPI_H_ */
diff --git a/include/spl.h b/include/spl.h
index 1eebea3..f92089b 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -1073,4 +1073,20 @@
{
return IS_ENABLED(CONFIG_SPL_GZIP) || IS_ENABLED(CONFIG_SPL_LZMA);
}
+
+/**
+ * spl_write_upl_handoff() - Write a Universal Payload hand-off structure
+ *
+ * @spl_image: Information about the image being booted
+ * Return: 0 if OK, -ve on error
+ */
+int spl_write_upl_handoff(struct spl_image_info *spl_image);
+
+/**
+ * spl_upl_init() - Get UPL ready for information to be added
+ *
+ * This must be called before upl_add_image(), etc.
+ */
+void spl_upl_init(void);
+
#endif
diff --git a/include/test/suites.h b/include/test/suites.h
index 365d5f2..2ceef57 100644
--- a/include/test/suites.h
+++ b/include/test/suites.h
@@ -63,5 +63,6 @@
int do_ut_time(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
int do_ut_unicode(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[]);
+int do_ut_upl(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
#endif /* __TEST_SUITES_H__ */
diff --git a/include/ubi_uboot.h b/include/ubi_uboot.h
index d7a8851..ea0db69 100644
--- a/include/ubi_uboot.h
+++ b/include/ubi_uboot.h
@@ -48,11 +48,20 @@
extern int ubi_init(void);
extern void ubi_exit(void);
extern int ubi_part(char *part_name, const char *vid_header_offset);
-extern int ubi_volume_write(char *volume, void *buf, size_t size);
-extern int ubi_volume_read(char *volume, char *buf, size_t size);
+extern int ubi_volume_write(char *volume, void *buf, loff_t offset, size_t size);
+extern int ubi_volume_read(char *volume, char *buf, loff_t offset, size_t size);
extern struct ubi_device *ubi_devices[];
int cmd_ubifs_mount(char *vol_name);
int cmd_ubifs_umount(void);
+#if IS_ENABLED(CONFIG_UBI_BLOCK)
+int ubi_bind(struct udevice *dev);
+#else
+static inline int ubi_bind(struct udevice *dev)
+{
+ return -EOPNOTSUPP;
+}
+#endif
+
#endif
diff --git a/include/upl.h b/include/upl.h
new file mode 100644
index 0000000..2ec5ef1
--- /dev/null
+++ b/include/upl.h
@@ -0,0 +1,382 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * UPL handoff generation
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#ifndef __UPL_WRITE_H
+#define __UPL_WRITE_H
+
+#ifndef USE_HOSTCC
+
+#include <alist.h>
+#include <image.h>
+#include <dm/ofnode_decl.h>
+
+struct unit_test_state;
+
+#define UPLP_ADDRESS_CELLS "#address-cells"
+#define UPLP_SIZE_CELLS "#size-cells"
+
+#define UPLN_OPTIONS "options"
+#define UPLN_UPL_PARAMS "upl-params"
+#define UPLP_SMBIOS "smbios"
+#define UPLP_ACPI "acpi"
+#define UPLP_BOOTMODE "bootmode"
+#define UPLP_ADDR_WIDTH "addr-width"
+#define UPLP_ACPI_NVS_SIZE "acpi-nvs-size"
+
+#define UPLPATH_UPL_IMAGE "/options/upl-image"
+#define UPLN_UPL_IMAGE "upl-image"
+#define UPLN_IMAGE "image"
+#define UPLP_FIT "fit"
+#define UPLP_CONF_OFFSET "conf-offset"
+#define UPLP_LOAD "load"
+#define UPLP_SIZE "size"
+#define UPLP_OFFSET "offset"
+#define UPLP_DESCRIPTION "description"
+
+#define UPLN_MEMORY "memory"
+#define UPLP_HOTPLUGGABLE "hotpluggable"
+
+#define UPLPATH_MEMORY_MAP "/memory-map"
+#define UPLN_MEMORY_MAP "memory-map"
+#define UPLP_USAGE "usage"
+
+#define UPLN_MEMORY_RESERVED "reserved-memory"
+#define UPLPATH_MEMORY_RESERVED "/reserved-memory"
+#define UPLP_NO_MAP "no-map"
+
+#define UPLN_SERIAL "serial"
+#define UPLP_REG "reg"
+#define UPLP_COMPATIBLE "compatible"
+#define UPLP_CLOCK_FREQUENCY "clock-frequency"
+#define UPLP_CURRENT_SPEED "current-speed"
+#define UPLP_REG_IO_SHIFT "reg-io-shift"
+#define UPLP_REG_OFFSET "reg-offset"
+#define UPLP_REG_IO_WIDTH "reg-io-width"
+#define UPLP_VIRTUAL_REG "virtual-reg"
+#define UPLP_ACCESS_TYPE "access-type"
+
+#define UPLN_GRAPHICS "framebuffer"
+#define UPLC_GRAPHICS "simple-framebuffer"
+#define UPLP_WIDTH "width"
+#define UPLP_HEIGHT "height"
+#define UPLP_STRIDE "stride"
+#define UPLP_GRAPHICS_FORMAT "format"
+
+/**
+ * enum upl_boot_mode - Encodes the boot mode
+ *
+ * Each is a bit number from the boot_mode mask
+ */
+enum upl_boot_mode {
+ UPLBM_FULL,
+ UPLBM_MINIMAL,
+ UPLBM_FAST,
+ UPLBM_DIAG,
+ UPLBM_DEFAULT,
+ UPLBM_S2,
+ UPLBM_S3,
+ UPLBM_S4,
+ UPLBM_S5,
+ UPLBM_FACTORY,
+ UPLBM_FLASH,
+ UPLBM_RECOVERY,
+
+ UPLBM_COUNT,
+};
+
+/**
+ * struct upl_image - UPL image informaiton
+ *
+ * @load: Address image was loaded to
+ * @size: Size of image in bytes
+ * @offset: Offset of the image in the FIT (0=none)
+ * @desc: Description of the iamge (taken from the FIT)
+ */
+struct upl_image {
+ ulong load;
+ ulong size;
+ uint offset;
+ const char *description;
+};
+
+/**
+ * struct memregion - Information about a region of memory
+ *
+ * @base: Base address
+ * @size: Size in bytes
+ */
+struct memregion {
+ ulong base;
+ ulong size;
+};
+
+/**
+ * struct upl_mem - Information about physical-memory layout
+ *
+ * TODO: Figure out initial-mapped-area
+ *
+ * @region: Memory region list (struct memregion)
+ * @hotpluggable: true if hotpluggable
+ */
+struct upl_mem {
+ struct alist region;
+ bool hotpluggable;
+};
+
+/**
+ * enum upl_usage - Encodes the usage
+ *
+ * Each is a bit number from the usage mask
+ */
+enum upl_usage {
+ UPLUS_ACPI_RECLAIM,
+ UPLUS_ACPI_NVS,
+ UPLUS_BOOT_CODE,
+ UPLUS_BOOT_DATA,
+ UPLUS_RUNTIME_CODE,
+ UPLUS_RUNTIME_DATA,
+ UPLUS_COUNT
+};
+
+/**
+ * struct upl_memmap - Information about logical-memory layout
+ *
+ * @name: Node name to use
+ * @region: Memory region list (struct memregion)
+ * @usage: Memory-usage mask (enum upl_usage)
+ */
+struct upl_memmap {
+ const char *name;
+ struct alist region;
+ uint usage;
+};
+
+/**
+ * struct upl_memres - Reserved memory
+ *
+ * @name: Node name to use
+ * @region: Reserved memory region list (struct memregion)
+ * @no_map: true to indicate that a virtual mapping must not be created
+ */
+struct upl_memres {
+ const char *name;
+ struct alist region;
+ bool no_map;
+};
+
+enum upl_serial_access_type {
+ UPLSAT_MMIO,
+ UPLSAT_IO,
+};
+
+/* serial defaults */
+enum {
+ UPLD_REG_IO_SHIFT = 0,
+ UPLD_REG_OFFSET = 0,
+ UPLD_REG_IO_WIDTH = 1,
+};
+
+/**
+ * enum upl_access_type - Access types
+ *
+ * @UPLAT_MMIO: Memory-mapped I/O
+ * @UPLAT_IO: Separate I/O
+ */
+enum upl_access_type {
+ UPLAT_MMIO,
+ UPLAT_IO,
+};
+
+/**
+ * struct upl_serial - Serial console
+ *
+ * @compatible: Compatible string (NULL if there is no serial console)
+ * @clock_frequency: Input clock frequency of UART
+ * @current_speed: Current baud rate of UART
+ * @reg: List of base address and size of registers (struct memregion)
+ * @reg_shift_log2: log2 of distance between each register
+ * @reg_offset: Offset of registers from the base address
+ * @reg_width: Register width in bytes
+ * @virtual_reg: Virtual register access (0 for none)
+ * @access_type: Register access type to use
+ */
+struct upl_serial {
+ const char *compatible;
+ uint clock_frequency;
+ uint current_speed;
+ struct alist reg;
+ uint reg_io_shift;
+ uint reg_offset;
+ uint reg_io_width;
+ ulong virtual_reg;
+ enum upl_serial_access_type access_type;
+};
+
+/**
+ * enum upl_graphics_format - Graphics formats
+ *
+ * @UPLGF_ARGB32: 32bpp format using 0xaarrggbb
+ * @UPLGF_ABGR32: 32bpp format using 0xaabbggrr
+ * @UPLGF_ARGB64: 64bpp format using 0xaaaabbbbggggrrrr
+ */
+enum upl_graphics_format {
+ UPLGF_ARGB32,
+ UPLGF_ABGR32,
+ UPLGF_ABGR64,
+};
+
+/**
+ * @reg: List of base address and size of registers (struct memregion)
+ * @width: Width of display in pixels
+ * @height: Height of display in pixels
+ * @stride: Number of bytes from one line to the next
+ * @format: Pixel format
+ */
+struct upl_graphics {
+ struct alist reg;
+ uint width;
+ uint height;
+ uint stride;
+ enum upl_graphics_format format;
+};
+
+/*
+ * Information about the UPL state
+ *
+ * @addr_cells: Number of address cells used in the handoff
+ * @size_cells: Number of size cells used in the handoff
+ * @bootmode: Boot-mode mask (enum upl_boot_mode)
+ * @fit: Address of FIT image that was loaded
+ * @conf_offset: Offset in FIT of the configuration that was selected
+ * @addr_width: Adress-bus width of machine, e.g. 46 for 46 bits
+ * @acpi_nvs_size: Size of the ACPI non-volatile-storage area in bytes
+ * @image: Information about each image (struct upl_image)
+ * @mem: Information about physical-memory regions (struct upl_mem)
+ * @nennap: Information about logical-memory regions (struct upl_memmap)
+ * @nennap: Information about reserved-memory regions (struct upl_memres)
+ */
+struct upl {
+ int addr_cells;
+ int size_cells;
+
+ ulong smbios;
+ ulong acpi;
+ uint bootmode;
+ ulong fit;
+ uint conf_offset;
+ uint addr_width;
+ uint acpi_nvs_size;
+
+ struct alist image;
+ struct alist mem;
+ struct alist memmap;
+ struct alist memres;
+ struct upl_serial serial;
+ struct upl_graphics graphics;
+};
+
+/**
+ * upl_write_handoff() - Write a Unversal Payload handoff structure
+ *
+ * upl: UPL state to write
+ * @root: root node to write it to
+ * @skip_existing: Avoid recreating any nodes which already exist in the
+ * devicetree. For example, if there is a serial node, just leave it alone,
+ * since don't need to create a new one
+ * Return: 0 on success, -ve on error
+ */
+int upl_write_handoff(const struct upl *upl, ofnode root, bool skip_existing);
+
+/**
+ * upl_create_handoff_tree() - Write a Unversal Payload handoff structure
+ *
+ * upl: UPL state to write
+ * @treep: Returns a new tree containing the handoff
+ * Return: 0 on success, -ve on error
+ */
+int upl_create_handoff_tree(const struct upl *upl, oftree *treep);
+
+/**
+ * upl_read_handoff() - Read a Unversal Payload handoff structure
+ *
+ * upl: UPL state to read into
+ * @tree: Devicetree containing the data to read
+ * Return: 0 on success, -ve on error
+ */
+int upl_read_handoff(struct upl *upl, oftree tree);
+
+/**
+ * upl_get_test_data() - Fill a UPL with some test data
+ *
+ * @uts: Test state (can be uninited)
+ * @upl: Returns test data
+ * Return: 0 on success, 1 on error
+ */
+int upl_get_test_data(struct unit_test_state *uts, struct upl *upl);
+#endif /* USE_HOSTCC */
+
+#if CONFIG_IS_ENABLED(UPL) && defined(CONFIG_SPL_BUILD)
+
+/**
+ * upl_set_fit_info() - Set up basic info about the FIT
+ *
+ * @fit: Address of FIT
+ * @conf_offset: Configuration node being used
+ * @entry_addr: Entry address for next phase
+ */
+void upl_set_fit_info(ulong fit, int conf_offset, ulong entry_addr);
+
+/**
+ * upl_set_fit_addr() - Set up the address of the FIT
+ *
+ * @fit: Address of FIT
+ */
+void upl_set_fit_addr(ulong fit);
+
+#else
+static inline void upl_set_fit_addr(ulong fit) {}
+static inline void upl_set_fit_info(ulong fit, int conf_offset,
+ ulong entry_addr) {}
+#endif /* UPL && SPL */
+
+/**
+ * _upl_add_image() - Internal function to add a new image to the UPL
+ *
+ * @node: Image node offset in FIT
+ * @load_addr: Address to which images was loaded
+ * @size: Image size in bytes
+ * @desc: Description of image
+ * Return: 0 if OK, -ENOMEM if out of memory
+ */
+int _upl_add_image(int node, ulong load_addr, ulong size, const char *desc);
+
+/**
+ * upl_add_image() - Add a new image to the UPL
+ *
+ * @fit: Pointer to FIT
+ * @node: Image node offset in FIT
+ * @load_addr: Address to which images was loaded
+ * @size: Image size in bytes
+ * Return: 0 if OK, -ENOMEM if out of memory
+ */
+static inline int upl_add_image(const void *fit, int node, ulong load_addr,
+ ulong size)
+{
+ if (CONFIG_IS_ENABLED(UPL) && IS_ENABLED(CONFIG_SPL_BUILD)) {
+ const char *desc = fdt_getprop(fit, node, FIT_DESC_PROP, NULL);
+
+ return _upl_add_image(node, load_addr, size, desc);
+ }
+
+ return 0;
+}
+
+/** upl_init() - Set up a UPL struct */
+void upl_init(struct upl *upl);
+
+#endif /* __UPL_WRITE_H */
diff --git a/include/zynqpl.h b/include/zynqpl.h
index d7dc064..08d067d 100644
--- a/include/zynqpl.h
+++ b/include/zynqpl.h
@@ -20,9 +20,11 @@
#define XILINX_ZYNQ_XC7Z007S 0x3
#define XILINX_ZYNQ_XC7Z010 0x2
+#define XILINX_ZYNQ_XC7Z010_LR 0x4
#define XILINX_ZYNQ_XC7Z012S 0x1c
#define XILINX_ZYNQ_XC7Z014S 0x8
#define XILINX_ZYNQ_XC7Z015 0x1b
+#define XILINX_ZYNQ_XC7Z020_LR 0x9
#define XILINX_ZYNQ_XC7Z020 0x7
#define XILINX_ZYNQ_XC7Z030 0xc
#define XILINX_ZYNQ_XC7Z035 0x12
@@ -32,9 +34,11 @@
/* Device Image Sizes */
#define XILINX_XC7Z007S_SIZE 16669920/8
#define XILINX_XC7Z010_SIZE 16669920/8
+#define XILINX_XC7Z010_LR_SIZE 16669920/8
#define XILINX_XC7Z012S_SIZE 28085344/8
#define XILINX_XC7Z014S_SIZE 32364512/8
#define XILINX_XC7Z015_SIZE 28085344/8
+#define XILINX_XC7Z020_LR_SIZE 32364512/8
#define XILINX_XC7Z020_SIZE 32364512/8
#define XILINX_XC7Z030_SIZE 47839328/8
#define XILINX_XC7Z035_SIZE 106571232/8
@@ -44,9 +48,11 @@
/* Device Names */
#define XILINX_XC7Z007S_NAME "7z007s"
#define XILINX_XC7Z010_NAME "7z010"
+#define XILINX_XC7Z010_LR_NAME "xc7z010_lr"
#define XILINX_XC7Z012S_NAME "7z012s"
#define XILINX_XC7Z014S_NAME "7z014s"
#define XILINX_XC7Z015_NAME "7z015"
+#define XILINX_XC7Z020_LR_NAME "xa7z020_lr"
#define XILINX_XC7Z020_NAME "7z020"
#define XILINX_XC7Z030_NAME "7z030"
#define XILINX_XC7Z035_NAME "7z035"
diff --git a/lib/Makefile b/lib/Makefile
index e389ad0..81b503a 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -147,6 +147,7 @@
obj-$(CONFIG_$(SPL_)OID_REGISTRY) += oid_registry.o
obj-y += abuf.o
+obj-y += alist.o
obj-y += date.o
obj-y += rtc-lib.o
obj-$(CONFIG_LIB_ELF) += elf.o
diff --git a/lib/alist.c b/lib/alist.c
new file mode 100644
index 0000000..b7928ca
--- /dev/null
+++ b/lib/alist.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Handles a contiguous list of pointers which be allocated and freed
+ *
+ * Copyright 2023 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <alist.h>
+#include <display_options.h>
+#include <malloc.h>
+#include <stdio.h>
+#include <string.h>
+
+enum {
+ ALIST_INITIAL_SIZE = 4, /* default size of unsized list */
+};
+
+bool alist_init(struct alist *lst, uint obj_size, uint start_size)
+{
+ /* Avoid realloc for the initial size to help malloc_simple */
+ memset(lst, '\0', sizeof(struct alist));
+ if (start_size) {
+ lst->data = calloc(obj_size, start_size);
+ if (!lst->data) {
+ lst->flags = ALISTF_FAIL;
+ return false;
+ }
+ lst->alloc = start_size;
+ }
+ lst->obj_size = obj_size;
+
+ return true;
+}
+
+void alist_uninit(struct alist *lst)
+{
+ free(lst->data);
+
+ /* Clear fields to avoid any confusion */
+ memset(lst, '\0', sizeof(struct alist));
+}
+
+/**
+ * alist_expand_to() - Expand a list to the given size
+ *
+ * @lst: List to modify
+ * @inc_by: Amount to expand to
+ * Return: true if OK, false if out of memory
+ */
+static bool alist_expand_to(struct alist *lst, uint new_alloc)
+{
+ void *new_data;
+
+ if (lst->flags & ALISTF_FAIL)
+ return false;
+
+ /* avoid using realloc() since it increases code size */
+ new_data = malloc(lst->obj_size * new_alloc);
+ if (!new_data) {
+ lst->flags |= ALISTF_FAIL;
+ return false;
+ }
+
+ memcpy(new_data, lst->data, lst->obj_size * lst->alloc);
+ free(lst->data);
+
+ memset(new_data + lst->obj_size * lst->alloc, '\0',
+ lst->obj_size * (new_alloc - lst->alloc));
+ lst->alloc = new_alloc;
+ lst->data = new_data;
+
+ return true;
+}
+
+bool alist_expand_by(struct alist *lst, uint inc_by)
+{
+ return alist_expand_to(lst, lst->alloc + inc_by);
+}
+
+/**
+ * alist_expand_min() - Expand to at least the provided size
+ *
+ * Expands to the lowest power of two which can incorporate the new size
+ *
+ * @lst: alist to expand
+ * @min_alloc: Minimum new allocated size; if 0 then ALIST_INITIAL_SIZE is used
+ * Return: true if OK, false if out of memory
+ */
+static bool alist_expand_min(struct alist *lst, uint min_alloc)
+{
+ uint new_alloc;
+
+ for (new_alloc = lst->alloc ?: ALIST_INITIAL_SIZE;
+ new_alloc < min_alloc;)
+ new_alloc *= 2;
+
+ return alist_expand_to(lst, new_alloc);
+}
+
+const void *alist_get_ptr(const struct alist *lst, uint index)
+{
+ if (index >= lst->count)
+ return NULL;
+
+ return lst->data + index * lst->obj_size;
+}
+
+void *alist_ensure_ptr(struct alist *lst, uint index)
+{
+ uint minsize = index + 1;
+ void *ptr;
+
+ if (index >= lst->alloc && !alist_expand_min(lst, minsize))
+ return NULL;
+
+ ptr = lst->data + index * lst->obj_size;
+ if (minsize >= lst->count)
+ lst->count = minsize;
+
+ return ptr;
+}
+
+void *alist_add_placeholder(struct alist *lst)
+{
+ return alist_ensure_ptr(lst, lst->count);
+}
+
+void *alist_add_ptr(struct alist *lst, void *obj)
+{
+ void *ptr;
+
+ ptr = alist_add_placeholder(lst);
+ if (!ptr)
+ return NULL;
+ memcpy(ptr, obj, lst->obj_size);
+
+ return ptr;
+}
+
+void *alist_uninit_move_ptr(struct alist *alist, size_t *countp)
+{
+ void *ptr;
+
+ if (countp)
+ *countp = alist->count;
+ if (!alist->count) {
+ alist_uninit(alist);
+ return NULL;
+ }
+
+ ptr = alist->data;
+
+ /* Clear everything out so there is no record of the data */
+ alist_init(alist, alist->obj_size, 0);
+
+ return ptr;
+}
diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
index eedc5f3..4f52284 100644
--- a/lib/efi_loader/efi_boottime.c
+++ b/lib/efi_loader/efi_boottime.c
@@ -2509,16 +2509,12 @@
return EFI_EXIT(EFI_INVALID_PARAMETER);
*protocol_buffer = NULL;
- *protocol_buffer_count = 0;
efiobj = efi_search_obj(handle);
if (!efiobj)
return EFI_EXIT(EFI_INVALID_PARAMETER);
- /* Count protocols */
- list_for_each(protocol_handle, &efiobj->protocols) {
- ++*protocol_buffer_count;
- }
+ *protocol_buffer_count = list_count_nodes(&efiobj->protocols);
/* Copy GUIDs */
if (*protocol_buffer_count) {
diff --git a/lib/efi_loader/efi_fdt.c b/lib/efi_loader/efi_fdt.c
index c5ecade..f882622 100644
--- a/lib/efi_loader/efi_fdt.c
+++ b/lib/efi_loader/efi_fdt.c
@@ -14,7 +14,7 @@
#include <vsprintf.h>
/**
- * distro_efi_get_fdt_name() - get the filename for reading the .dtb file
+ * efi_get_distro_fdt_name() - get the filename for reading the .dtb file
*
* @fname: buffer for filename
* @size: buffer size
diff --git a/lib/elf.c b/lib/elf.c
index dc13935..28ec87b 100644
--- a/lib/elf.c
+++ b/lib/elf.c
@@ -90,6 +90,10 @@
void *dst = (void *)(ulong)phdr->p_paddr;
void *src = (void *)addr + phdr->p_offset;
+ /* Only load PT_LOAD program header */
+ if (phdr->p_type != PT_LOAD)
+ continue;
+
debug("Loading phdr %i to 0x%p (%lu bytes)\n",
i, dst, (ulong)phdr->p_filesz);
if (phdr->p_filesz)
@@ -205,6 +209,10 @@
void *dst = (void *)(uintptr_t)phdr->p_paddr;
void *src = (void *)addr + phdr->p_offset;
+ /* Only load PT_LOAD program header */
+ if (phdr->p_type != PT_LOAD)
+ continue;
+
debug("Loading phdr %i to 0x%p (%i bytes)\n",
i, dst, phdr->p_filesz);
if (phdr->p_filesz)
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 6865f78..5edc8dd 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -1685,6 +1685,7 @@
gd->fdt_src = FDTSRC_BLOBLIST;
log_debug("Devicetree is in bloblist at %p\n",
gd->fdt_blob);
+ ret = 0;
} else {
log_debug("No FDT found in bloblist\n");
ret = -ENOENT;
diff --git a/lib/strto.c b/lib/strto.c
index 5157332..f83ac67 100644
--- a/lib/strto.c
+++ b/lib/strto.c
@@ -236,12 +236,14 @@
return NULL;
/* count the number of space-separated strings */
- for (count = *str != '\0', p = str; *p; p++) {
+ for (count = 0, p = str; *p; p++) {
if (*p == ' ') {
count++;
*p = '\0';
}
}
+ if (p != str && p[-1])
+ count++;
/* allocate the pointer array, allowing for a NULL terminator */
ptr = calloc(count + 1, sizeof(char *));
diff --git a/net/wget.c b/net/wget.c
index f1dd7ab..945bfd2 100644
--- a/net/wget.c
+++ b/net/wget.c
@@ -244,7 +244,7 @@
pkt_in_q = (void *)image_load_addr + PKT_QUEUE_OFFSET +
(pkt_q_idx * PKT_QUEUE_PACKET_SIZE);
- ptr1 = map_sysmem((phys_addr_t)pkt_in_q, len);
+ ptr1 = map_sysmem((ulong)pkt_in_q, len);
memcpy(ptr1, pkt, len);
unmap_sysmem(ptr1);
@@ -314,9 +314,8 @@
for (i = 0; i < pkt_q_idx; i++) {
int err;
- ptr1 = map_sysmem(
- (phys_addr_t)(pkt_q[i].pkt),
- pkt_q[i].len);
+ ptr1 = map_sysmem((ulong)pkt_q[i].pkt,
+ pkt_q[i].len);
err = store_block(ptr1,
pkt_q[i].tcp_seq_num -
initial_data_seq_num,
diff --git a/scripts/decodecode b/scripts/decodecode
index 9cef558..6364218 100755
--- a/scripts/decodecode
+++ b/scripts/decodecode
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Disassemble the Code: line in Linux oopses
# usage: decodecode < oops.file
@@ -6,6 +6,9 @@
# options: set env. variable AFLAGS=options to pass options to "as";
# e.g., to decode an i386 oops on an x86_64 system, use:
# AFLAGS=--32 decodecode < 386.oops
+# PC=hex - the PC (program counter) the oops points to
+
+faultlinenum=1
cleanup() {
rm -f $T $T.s $T.o $T.oo $T.aa $T.dis
@@ -60,15 +63,27 @@
4) type=4byte ;;
esac
+if [ -z "$ARCH" ]; then
+ case `uname -m` in
+ aarch64*) ARCH=arm64 ;;
+ arm*) ARCH=arm ;;
+ loongarch*) ARCH=loongarch ;;
+ esac
+fi
+
+# Params: (tmp_file, pc_sub)
disas() {
- ${CROSS_COMPILE}as $AFLAGS -o $1.o $1.s > /dev/null 2>&1
+ t=$1
+ pc_sub=$2
+
+ ${CROSS_COMPILE}as $AFLAGS -o $t.o $t.s > /dev/null 2>&1
if [ "$ARCH" = "arm" ]; then
if [ $width -eq 2 ]; then
OBJDUMPFLAGS="-M force-thumb"
fi
- ${CROSS_COMPILE}strip $1.o
+ ${CROSS_COMPILE}strip $t.o
fi
if [ "$ARCH" = "arm64" ]; then
@@ -76,13 +91,122 @@
type=inst
fi
- ${CROSS_COMPILE}strip $1.o
+ ${CROSS_COMPILE}strip $t.o
fi
- ${CROSS_COMPILE}objdump $OBJDUMPFLAGS -S $1.o | \
- grep -v "/tmp\|Disassembly\|\.text\|^$" > $1.dis 2>&1
+ if [ "$ARCH" = "riscv" ]; then
+ OBJDUMPFLAGS="-M no-aliases --section=.text -D"
+ ${CROSS_COMPILE}strip $t.o
+ fi
+
+ if [ "$ARCH" = "loongarch" ]; then
+ ${CROSS_COMPILE}strip $t.o
+ fi
+
+ if [ $pc_sub -ne 0 ]; then
+ if [ $PC ]; then
+ adj_vma=$(( $PC - $pc_sub ))
+ OBJDUMPFLAGS="$OBJDUMPFLAGS --adjust-vma=$adj_vma"
+ fi
+ fi
+
+ ${CROSS_COMPILE}objdump $OBJDUMPFLAGS -S $t.o | \
+ grep -v "/tmp\|Disassembly\|\.text\|^$" > $t.dis 2>&1
}
+# Match the maximum number of opcode bytes from @op_bytes contained within
+# @opline
+#
+# Params:
+# @op_bytes: The string of bytes from the Code: line
+# @opline: The disassembled line coming from objdump
+#
+# Returns:
+# The max number of opcode bytes from the beginning of @op_bytes which match
+# the opcode bytes in the objdump line.
+get_substr_opcode_bytes_num()
+{
+ local op_bytes=$1
+ local opline=$2
+
+ local retval=0
+ substr=""
+
+ for opc in $op_bytes;
+ do
+ substr+="$opc"
+
+ opcode="$substr"
+ if [ "$ARCH" = "riscv" ]; then
+ opcode=$(echo $opcode | tr ' ' '\n' | tac | tr -d '\n')
+ fi
+
+ # return if opcode bytes do not match @opline anymore
+ if ! echo $opline | grep -q "$opcode";
+ then
+ break
+ fi
+
+ # add trailing space
+ substr+=" "
+ retval=$((retval+1))
+ done
+
+ return $retval
+}
+
+# Return the line number in objdump output to where the IP marker in the Code:
+# line points to
+#
+# Params:
+# @all_code: code in bytes without the marker
+# @dis_file: disassembled file
+# @ip_byte: The byte to which the IP points to
+get_faultlinenum()
+{
+ local all_code="$1"
+ local dis_file="$2"
+
+ # num bytes including IP byte
+ local num_bytes_ip=$(( $3 + 1 * $width ))
+
+ # Add the two header lines (we're counting from 1).
+ local retval=3
+
+ # remove marker
+ all_code=$(echo $all_code | sed -e 's/[<>()]//g')
+
+ while read line
+ do
+ get_substr_opcode_bytes_num "$all_code" "$line"
+ ate_opcodes=$?
+
+ if ! (( $ate_opcodes )); then
+ continue
+ fi
+
+ num_bytes_ip=$((num_bytes_ip - ($ate_opcodes * $width) ))
+ if (( $num_bytes_ip <= 0 )); then
+ break
+ fi
+
+ # Delete matched opcode bytes from all_code. For that, compute
+ # how many chars those opcodes are represented by and include
+ # trailing space.
+ #
+ # a byte is 2 chars, ate_opcodes is also the number of trailing
+ # spaces
+ del_chars=$(( ($ate_opcodes * $width * 2) + $ate_opcodes ))
+
+ all_code=$(echo $all_code | sed -e "s!^.\{$del_chars\}!!")
+
+ let "retval+=1"
+
+ done < $dis_file
+
+ return $retval
+}
+
marker=`expr index "$code" "\<"`
if [ $marker -eq 0 ]; then
marker=`expr index "$code" "\("`
@@ -90,36 +214,39 @@
touch $T.oo
if [ $marker -ne 0 ]; then
+ # How many bytes to subtract from the program counter
+ # in order to get to the beginning virtual address of the
+ # Code:
+ pc_sub=$(( (($marker - 1) / (2 * $width + 1)) * $width ))
echo All code >> $T.oo
echo ======== >> $T.oo
beforemark=`echo "$code"`
echo -n " .$type 0x" > $T.s
+
echo $beforemark | sed -e 's/ /,0x/g; s/[<>()]//g' >> $T.s
- disas $T
+
+ disas $T $pc_sub
+
cat $T.dis >> $T.oo
- rm -f $T.o $T.s $T.dis
-# and fix code at-and-after marker
+ get_faultlinenum "$code" "$T.dis" $pc_sub
+ faultlinenum=$?
+
+ # and fix code at-and-after marker
code=`echo "$code" | cut -c$((${marker} + 1))-`
+
+ rm -f $T.o $T.s $T.dis
fi
+
echo Code starting with the faulting instruction > $T.aa
echo =========================================== >> $T.aa
-code=`echo $code | sed -e 's/ [<(]/ /;s/[>)] / /;s/ /,0x/g; s/[>)]$//'`
+code=`echo $code | sed -e 's/\r//;s/ [<(]/ /;s/[>)] / /;s/ /,0x/g; s/[>)]$//'`
echo -n " .$type 0x" > $T.s
echo $code >> $T.s
-disas $T
+disas $T 0
cat $T.dis >> $T.aa
-# (lines of whole $T.oo) - (lines of $T.aa, i.e. "Code starting") + 3,
-# i.e. the title + the "===..=" line (sed is counting from 1, 0 address is
-# special)
-faultlinenum=$(( $(wc -l $T.oo | cut -d" " -f1) - \
- $(wc -l $T.aa | cut -d" " -f1) + 3))
-
-faultline=`cat $T.dis | head -1 | cut -d":" -f2-`
-faultline=`echo "$faultline" | sed -e 's/\[/\\\[/g; s/\]/\\\]/g'`
-
-cat $T.oo | sed -e "${faultlinenum}s/^\(.*:\)\(.*\)/\1\*\2\t\t<-- trapping instruction/"
+cat $T.oo | sed -e "${faultlinenum}s/^\([^:]*:\)\(.*\)/\1\*\2\t\t<-- trapping instruction/"
echo
cat $T.aa
cleanup
diff --git a/test/boot/Makefile b/test/boot/Makefile
index 068522c..8ec5daa 100644
--- a/test/boot/Makefile
+++ b/test/boot/Makefile
@@ -13,3 +13,5 @@
obj-$(CONFIG_BOOTMETH_VBE_SIMPLE) += vbe_simple.o
endif
obj-$(CONFIG_BOOTMETH_VBE) += vbe_fixup.o
+
+obj-$(CONFIG_UPL) += upl.o
diff --git a/test/boot/upl.c b/test/boot/upl.c
new file mode 100644
index 0000000..364fb05
--- /dev/null
+++ b/test/boot/upl.c
@@ -0,0 +1,437 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * UPL handoff testing
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <abuf.h>
+#include <mapmem.h>
+#include <upl.h>
+#include <dm/ofnode.h>
+#include <test/suites.h>
+#include <test/test.h>
+#include <test/ut.h>
+#include "bootstd_common.h"
+
+/* Declare a new upl test */
+#define UPL_TEST(_name, _flags) UNIT_TEST(_name, _flags, upl_test)
+
+static int add_region(struct unit_test_state *uts, struct alist *lst,
+ ulong base, ulong size)
+{
+ struct memregion region;
+
+ region.base = base;
+ region.size = size;
+ ut_assertnonnull(alist_add(lst, region));
+
+ return 0;
+}
+
+int upl_get_test_data(struct unit_test_state *uts, struct upl *upl)
+{
+ struct upl_memmap memmap;
+ struct upl_memres memres;
+ struct upl_image img;
+ struct upl_mem mem;
+
+ upl_init(upl);
+
+ upl->addr_cells = 1;
+ upl->size_cells = 1;
+ upl->smbios = 0x123;
+ upl->acpi = 0x456;
+ upl->bootmode = BIT(UPLBM_DEFAULT) | BIT(UPLBM_S3);
+ upl->fit = 0x789;
+ upl->conf_offset = 0x234;
+ upl->addr_width = 46;
+ upl->acpi_nvs_size = 0x100;
+
+ /* image[0] */
+ img.load = 0x1;
+ img.size = 0x2;
+ img.offset = 0x3;
+ img.description = "U-Boot";
+ ut_assertnonnull(alist_add(&upl->image, img));
+
+ /* image[1] */
+ img.load = 0x4;
+ img.size = 0x5;
+ img.offset = 0x6;
+ img.description = "ATF";
+ ut_assertnonnull(alist_add(&upl->image, img));
+
+ /* mem[0] : 3 regions */
+ memset(&mem, '\0', sizeof(mem));
+ alist_init_struct(&mem.region, struct memregion);
+ ut_assertok(add_region(uts, &mem.region, 0x10, 0x20));
+ ut_assertok(add_region(uts, &mem.region, 0x30, 0x40));
+ ut_assertok(add_region(uts, &mem.region, 0x40, 0x50));
+ ut_assertnonnull(alist_add(&upl->mem, mem));
+
+ /* mem[0] : 1 region */
+ alist_init_struct(&mem.region, struct memregion);
+ ut_assertok(add_region(uts, &mem.region, 0x70, 0x80));
+ mem.hotpluggable = true;
+ ut_assertnonnull(alist_add(&upl->mem, mem));
+ mem.hotpluggable = false;
+
+ /* memmap[0] : 5 regions */
+ alist_init_struct(&memmap.region, struct memregion);
+ memmap.name = "acpi";
+ memmap.usage = BIT(UPLUS_ACPI_RECLAIM);
+ ut_assertok(add_region(uts, &memmap.region, 0x11, 0x12));
+ ut_assertok(add_region(uts, &memmap.region, 0x13, 0x14));
+ ut_assertok(add_region(uts, &memmap.region, 0x15, 0x16));
+ ut_assertok(add_region(uts, &memmap.region, 0x17, 0x18));
+ ut_assertok(add_region(uts, &memmap.region, 0x19, 0x1a));
+ ut_assertnonnull(alist_add(&upl->memmap, memmap));
+
+ /* memmap[1] : 1 region */
+ memmap.name = "u-boot";
+ memmap.usage = BIT(UPLUS_BOOT_DATA);
+ alist_init_struct(&memmap.region, struct memregion);
+ ut_assertok(add_region(uts, &memmap.region, 0x21, 0x22));
+ ut_assertnonnull(alist_add(&upl->memmap, memmap));
+
+ /* memmap[2] : 1 region */
+ alist_init_struct(&memmap.region, struct memregion);
+ memmap.name = "efi";
+ memmap.usage = BIT(UPLUS_RUNTIME_CODE);
+ ut_assertok(add_region(uts, &memmap.region, 0x23, 0x24));
+ ut_assertnonnull(alist_add(&upl->memmap, memmap));
+
+ /* memmap[3]: 2 regions */
+ alist_init_struct(&memmap.region, struct memregion);
+ memmap.name = "empty";
+ memmap.usage = 0;
+ ut_assertok(add_region(uts, &memmap.region, 0x25, 0x26));
+ ut_assertok(add_region(uts, &memmap.region, 0x27, 0x28));
+ ut_assertnonnull(alist_add(&upl->memmap, memmap));
+
+ /* memmap[4]: 1 region */
+ alist_init_struct(&memmap.region, struct memregion);
+ memmap.name = "acpi-things";
+ memmap.usage = BIT(UPLUS_RUNTIME_CODE) | BIT(UPLUS_ACPI_NVS);
+ ut_assertok(add_region(uts, &memmap.region, 0x29, 0x2a));
+ ut_assertnonnull(alist_add(&upl->memmap, memmap));
+
+ /* memres[0]: 1 region */
+ alist_init_struct(&memres.region, struct memregion);
+ memset(&memres, '\0', sizeof(memres));
+ memres.name = "mmio";
+ ut_assertok(add_region(uts, &memres.region, 0x2b, 0x2c));
+ ut_assertnonnull(alist_add(&upl->memres, memres));
+
+ /* memres[1]: 2 regions */
+ alist_init_struct(&memres.region, struct memregion);
+ memres.name = "memory";
+ ut_assertok(add_region(uts, &memres.region, 0x2d, 0x2e));
+ ut_assertok(add_region(uts, &memres.region, 0x2f, 0x30));
+ memres.no_map = true;
+ ut_assertnonnull(alist_add(&upl->memres, memres));
+
+ upl->serial.compatible = "ns16550a";
+ upl->serial.clock_frequency = 1843200;
+ upl->serial.current_speed = 115200;
+ alist_init_struct(&upl->serial.reg, struct memregion);
+ ut_assertok(add_region(uts, &upl->serial.reg, 0xf1de0000, 0x100));
+ upl->serial.reg_io_shift = 2;
+ upl->serial.reg_offset = 0x40;
+ upl->serial.reg_io_width = 1;
+ upl->serial.virtual_reg = 0x20000000;
+ upl->serial.access_type = UPLSAT_MMIO;
+
+ alist_init_struct(&upl->graphics.reg, struct memregion);
+ ut_assertok(add_region(uts, &upl->graphics.reg, 0xd0000000, 0x10000000));
+ upl->graphics.width = 1280;
+ upl->graphics.height = 1280;
+ upl->graphics.stride = upl->graphics.width * 4;
+ upl->graphics.format = UPLGF_ARGB32;
+
+ return 0;
+}
+
+static int compare_upl_image(struct unit_test_state *uts,
+ const struct upl_image *base,
+ const struct upl_image *cmp)
+{
+ ut_asserteq(base->load, cmp->load);
+ ut_asserteq(base->size, cmp->size);
+ ut_asserteq(base->offset, cmp->offset);
+ ut_asserteq_str(base->description, cmp->description);
+
+ return 0;
+}
+
+static int compare_upl_memregion(struct unit_test_state *uts,
+ const struct memregion *base,
+ const struct memregion *cmp)
+{
+ ut_asserteq(base->base, cmp->base);
+ ut_asserteq(base->size, cmp->size);
+
+ return 0;
+}
+
+static int compare_upl_mem(struct unit_test_state *uts,
+ const struct upl_mem *base,
+ const struct upl_mem *cmp)
+{
+ int i;
+
+ ut_asserteq(base->region.count, cmp->region.count);
+ ut_asserteq(base->hotpluggable, cmp->hotpluggable);
+ for (i = 0; i < base->region.count; i++) {
+ ut_assertok(compare_upl_memregion(uts,
+ alist_get(&base->region, i, struct memregion),
+ alist_get(&cmp->region, i, struct memregion)));
+ }
+
+ return 0;
+}
+
+static int check_device_name(struct unit_test_state *uts, const char *base,
+ const char *cmp)
+{
+ const char *p;
+
+ p = strchr(cmp, '@');
+ if (p) {
+ ut_assertnonnull(p);
+ ut_asserteq_strn(base, cmp);
+ ut_asserteq(p - cmp, strlen(base));
+ } else {
+ ut_asserteq_str(base, cmp);
+ }
+
+ return 0;
+}
+
+static int compare_upl_memmap(struct unit_test_state *uts,
+ const struct upl_memmap *base,
+ const struct upl_memmap *cmp)
+{
+ int i;
+
+ ut_assertok(check_device_name(uts, base->name, cmp->name));
+ ut_asserteq(base->region.count, cmp->region.count);
+ ut_asserteq(base->usage, cmp->usage);
+ for (i = 0; i < base->region.count; i++)
+ ut_assertok(compare_upl_memregion(uts,
+ alist_get(&base->region, i, struct memregion),
+ alist_get(&cmp->region, i, struct memregion)));
+
+ return 0;
+}
+
+static int compare_upl_memres(struct unit_test_state *uts,
+ const struct upl_memres *base,
+ const struct upl_memres *cmp)
+{
+ int i;
+
+ ut_assertok(check_device_name(uts, base->name, cmp->name));
+ ut_asserteq(base->region.count, cmp->region.count);
+ ut_asserteq(base->no_map, cmp->no_map);
+ for (i = 0; i < base->region.count; i++)
+ ut_assertok(compare_upl_memregion(uts,
+ alist_get(&base->region, i, struct memregion),
+ alist_get(&cmp->region, i, struct memregion)));
+
+ return 0;
+}
+
+static int compare_upl_serial(struct unit_test_state *uts,
+ struct upl_serial *base, struct upl_serial *cmp)
+{
+ int i;
+
+ ut_asserteq_str(base->compatible, cmp->compatible);
+ ut_asserteq(base->clock_frequency, cmp->clock_frequency);
+ ut_asserteq(base->current_speed, cmp->current_speed);
+ for (i = 0; i < base->reg.count; i++)
+ ut_assertok(compare_upl_memregion(uts,
+ alist_get(&base->reg, i, struct memregion),
+ alist_get(&cmp->reg, i, struct memregion)));
+ ut_asserteq(base->reg_io_shift, cmp->reg_io_shift);
+ ut_asserteq(base->reg_offset, cmp->reg_offset);
+ ut_asserteq(base->reg_io_width, cmp->reg_io_width);
+ ut_asserteq(base->virtual_reg, cmp->virtual_reg);
+ ut_asserteq(base->access_type, cmp->access_type);
+
+ return 0;
+}
+
+static int compare_upl_graphics(struct unit_test_state *uts,
+ struct upl_graphics *base,
+ struct upl_graphics *cmp)
+{
+ int i;
+
+ for (i = 0; i < base->reg.count; i++)
+ ut_assertok(compare_upl_memregion(uts,
+ alist_get(&base->reg, i, struct memregion),
+ alist_get(&cmp->reg, i, struct memregion)));
+ ut_asserteq(base->width, cmp->width);
+ ut_asserteq(base->height, cmp->height);
+ ut_asserteq(base->stride, cmp->stride);
+ ut_asserteq(base->format, cmp->format);
+
+ return 0;
+}
+
+static int compare_upl(struct unit_test_state *uts, struct upl *base,
+ struct upl *cmp)
+{
+ int i;
+
+ ut_asserteq(base->addr_cells, cmp->addr_cells);
+ ut_asserteq(base->size_cells, cmp->size_cells);
+
+ ut_asserteq(base->smbios, cmp->smbios);
+ ut_asserteq(base->acpi, cmp->acpi);
+ ut_asserteq(base->bootmode, cmp->bootmode);
+ ut_asserteq(base->fit, cmp->fit);
+ ut_asserteq(base->conf_offset, cmp->conf_offset);
+ ut_asserteq(base->addr_width, cmp->addr_width);
+ ut_asserteq(base->acpi_nvs_size, cmp->acpi_nvs_size);
+
+ ut_asserteq(base->image.count, cmp->image.count);
+ for (i = 0; i < base->image.count; i++)
+ ut_assertok(compare_upl_image(uts,
+ alist_get(&base->image, i, struct upl_image),
+ alist_get(&cmp->image, i, struct upl_image)));
+
+ ut_asserteq(base->mem.count, cmp->mem.count);
+ for (i = 0; i < base->mem.count; i++)
+ ut_assertok(compare_upl_mem(uts,
+ alist_get(&base->mem, i, struct upl_mem),
+ alist_get(&cmp->mem, i, struct upl_mem)));
+
+ ut_asserteq(base->memmap.count, cmp->memmap.count);
+ for (i = 0; i < base->memmap.count; i++)
+ ut_assertok(compare_upl_memmap(uts,
+ alist_get(&base->memmap, i, struct upl_memmap),
+ alist_get(&cmp->memmap, i, struct upl_memmap)));
+
+ ut_asserteq(base->memres.count, cmp->memres.count);
+ for (i = 0; i < base->memres.count; i++)
+ ut_assertok(compare_upl_memres(uts,
+ alist_get(&base->memres, i, struct upl_memres),
+ alist_get(&cmp->memres, i, struct upl_memres)));
+
+ ut_assertok(compare_upl_serial(uts, &base->serial, &cmp->serial));
+ ut_assertok(compare_upl_graphics(uts, &base->graphics, &cmp->graphics));
+
+ return 0;
+}
+
+/* Basic test of writing and reading UPL handoff */
+static int upl_test_base(struct unit_test_state *uts)
+{
+ oftree tree, check_tree;
+ struct upl upl, check;
+ struct abuf buf;
+
+ if (!CONFIG_IS_ENABLED(OFNODE_MULTI_TREE))
+ return -EAGAIN; /* skip test */
+ ut_assertok(upl_get_test_data(uts, &upl));
+
+ ut_assertok(upl_create_handoff_tree(&upl, &tree));
+ ut_assertok(oftree_to_fdt(tree, &buf));
+
+ /*
+ * strings in check_tree and therefore check are only valid so long as
+ * buf stays around. As soon as we call abuf_uninit they go away
+ */
+ check_tree = oftree_from_fdt(abuf_data(&buf));
+ ut_assert(ofnode_valid(oftree_path(check_tree, "/")));
+
+ ut_assertok(upl_read_handoff(&check, check_tree));
+ ut_assertok(compare_upl(uts, &upl, &check));
+ abuf_uninit(&buf);
+
+ return 0;
+}
+UPL_TEST(upl_test_base, 0);
+
+/* Test 'upl info' command */
+static int upl_test_info(struct unit_test_state *uts)
+{
+ gd_set_upl(NULL);
+ ut_assertok(run_command("upl info", 0));
+ ut_assert_nextline("UPL state: inactive");
+ ut_assert_console_end();
+
+ gd_set_upl((struct upl *)uts); /* set it to any non-zero value */
+ ut_assertok(run_command("upl info", 0));
+ ut_assert_nextline("UPL state: active");
+ ut_assert_console_end();
+ gd_set_upl(NULL);
+
+ return 0;
+}
+UPL_TEST(upl_test_info, UT_TESTF_CONSOLE_REC);
+
+/* Test 'upl read' and 'upl_write' commands */
+static int upl_test_read_write(struct unit_test_state *uts)
+{
+ ulong addr;
+
+ if (!CONFIG_IS_ENABLED(OFNODE_MULTI_TREE))
+ return -EAGAIN; /* skip test */
+ ut_assertok(run_command("upl write", 0));
+
+ addr = env_get_hex("upladdr", 0);
+ ut_assert_nextline("UPL handoff written to %lx size %lx", addr,
+ env_get_hex("uplsize", 0));
+ ut_assert_console_end();
+
+ ut_assertok(run_command("upl read ${upladdr}", 0));
+ ut_assert_nextline("Reading UPL at %lx", addr);
+ ut_assert_console_end();
+
+ return 0;
+}
+UPL_TEST(upl_test_read_write, UT_TESTF_CONSOLE_REC);
+
+/* Test UPL passthrough */
+static int upl_test_info_norun(struct unit_test_state *uts)
+{
+ const struct upl_image *img;
+ struct upl *upl = gd_upl();
+ const void *fit;
+
+ ut_assertok(run_command("upl info -v", 0));
+ ut_assert_nextline("UPL state: active");
+ ut_assert_nextline("fit %lx", upl->fit);
+ ut_assert_nextline("conf_offset %x", upl->conf_offset);
+ ut_assert_nextlinen("image 0");
+ ut_assert_nextlinen("image 1");
+ ut_assert_console_end();
+
+ /* check the offsets */
+ fit = map_sysmem(upl->fit, 0);
+ ut_asserteq_str("conf-1", fdt_get_name(fit, upl->conf_offset, NULL));
+
+ ut_asserteq(2, upl->image.count);
+
+ img = alist_get(&upl->image, 1, struct upl_image);
+ ut_asserteq_str("firmware-1", fdt_get_name(fit, img->offset, NULL));
+ ut_asserteq(CONFIG_TEXT_BASE, img->load);
+
+ return 0;
+}
+UPL_TEST(upl_test_info_norun, UT_TESTF_CONSOLE_REC | UT_TESTF_MANUAL);
+
+int do_ut_upl(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+ struct unit_test *tests = UNIT_TEST_SUITE_START(upl_test);
+ const int n_ents = UNIT_TEST_SUITE_COUNT(upl_test);
+
+ return cmd_ut_category("cmd_upl", "cmd_upl_", tests, n_ents, argc,
+ argv);
+}
diff --git a/test/cmd/wget.c b/test/cmd/wget.c
index 356a4dc..b0feb21 100644
--- a/test/cmd/wget.c
+++ b/test/cmd/wget.c
@@ -26,6 +26,8 @@
#define SHIFT_TO_TCPHDRLEN_FIELD(x) ((x) << 4)
#define LEN_B_TO_DW(x) ((x) >> 2)
+int net_set_ack_options(union tcp_build_pkt *b);
+
static int sb_arp_handler(struct udevice *dev, void *packet,
unsigned int len)
{
@@ -105,6 +107,10 @@
const char *payload1 = "HTTP/1.1 200 OK\r\n"
"Content-Length: 30\r\n\r\n\r\n"
"<html><body>Hi</body></html>\r\n";
+ union tcp_build_pkt *b = (union tcp_build_pkt *)tcp;
+ const int recv_payload_len = len - net_set_ack_options(b) - IP_HDR_SIZE - ETHER_HDR_SIZE;
+ static int next_seq;
+ const int bottom_payload_len = 10;
/* Don't allow the buffer to overrun */
if (priv->recv_packets >= PKTBUFSRX)
@@ -119,13 +125,31 @@
tcp_send->tcp_dst = tcp->tcp_src;
data = (void *)tcp_send + IP_TCP_HDR_SIZE;
- if (ntohl(tcp->tcp_seq) == 1 && ntohl(tcp->tcp_ack) == 1) {
+ if (ntohl(tcp->tcp_seq) == 1 && ntohl(tcp->tcp_ack) == 1 && recv_payload_len == 0) {
+ // ignore ACK for three-way handshaking
+ return 0;
+ } else if (ntohl(tcp->tcp_seq) == 1 && ntohl(tcp->tcp_ack) == 1) {
+ // recv HTTP request message and reply top half data
tcp_send->tcp_seq = htonl(ntohl(tcp->tcp_ack));
- tcp_send->tcp_ack = htonl(ntohl(tcp->tcp_seq) + 1);
- payload_len = strlen(payload1);
+ tcp_send->tcp_ack = htonl(ntohl(tcp->tcp_seq) + recv_payload_len);
+
+ payload_len = strlen(payload1) - bottom_payload_len;
memcpy(data, payload1, payload_len);
tcp_send->tcp_flags = TCP_ACK;
- } else if (ntohl(tcp->tcp_seq) == 2) {
+
+ next_seq = ntohl(tcp_send->tcp_seq) + payload_len;
+ } else if (ntohl(tcp->tcp_ack) == next_seq) {
+ // reply bottom half data
+ const int top_payload_len = strlen(payload1) - bottom_payload_len;
+
+ tcp_send->tcp_seq = htonl(next_seq);
+ tcp_send->tcp_ack = htonl(ntohl(tcp->tcp_seq) + recv_payload_len);
+
+ payload_len = bottom_payload_len;
+ memcpy(data, payload1 + top_payload_len, payload_len);
+ tcp_send->tcp_flags = TCP_ACK;
+ } else {
+ // close connection
tcp_send->tcp_seq = htonl(ntohl(tcp->tcp_ack));
tcp_send->tcp_ack = htonl(ntohl(tcp->tcp_seq) + 1);
payload_len = 0;
@@ -148,11 +172,9 @@
pkt_len,
IPPROTO_TCP);
- if (ntohl(tcp->tcp_seq) == 1 || ntohl(tcp->tcp_seq) == 2) {
- priv->recv_packet_length[priv->recv_packets] =
- ETHER_HDR_SIZE + IP_TCP_HDR_SIZE + payload_len;
- ++priv->recv_packets;
- }
+ priv->recv_packet_length[priv->recv_packets] =
+ ETHER_HDR_SIZE + IP_TCP_HDR_SIZE + payload_len;
+ ++priv->recv_packets;
return 0;
}
diff --git a/test/cmd_ut.c b/test/cmd_ut.c
index 4e4aa8f..38ba89e 100644
--- a/test/cmd_ut.c
+++ b/test/cmd_ut.c
@@ -133,6 +133,9 @@
#ifdef CONFIG_CMD_SEAMA
U_BOOT_CMD_MKENT(seama, CONFIG_SYS_MAXARGS, 1, do_ut_seama, "", ""),
#endif
+#ifdef CONFIG_CMD_UPL
+ U_BOOT_CMD_MKENT(upl, CONFIG_SYS_MAXARGS, 1, do_ut_upl, "", ""),
+#endif
};
static int do_ut_all(struct cmd_tbl *cmdtp, int flag, int argc,
diff --git a/test/env/cmd_ut_env.c b/test/env/cmd_ut_env.c
index 13e0998..238cf31 100644
--- a/test/env/cmd_ut_env.c
+++ b/test/env/cmd_ut_env.c
@@ -9,6 +9,33 @@
#include <test/suites.h>
#include <test/ut.h>
+static int env_test_env_cmd(struct unit_test_state *uts)
+{
+ ut_assertok(run_command("setenv non_default_var1 1", 0));
+ ut_assert_console_end();
+
+ ut_assertok(run_command("setenv non_default_var2 1", 0));
+ ut_assert_console_end();
+
+ ut_assertok(run_command("env print non_default_var1", 0));
+ ut_assert_nextline("non_default_var1=1");
+ ut_assert_console_end();
+
+ ut_assertok(run_command("env default non_default_var1 non_default_var2", 0));
+ ut_assert_nextline("WARNING: 'non_default_var1' not in imported env, deleting it!");
+ ut_assert_nextline("WARNING: 'non_default_var2' not in imported env, deleting it!");
+ ut_assert_console_end();
+
+ ut_asserteq(1, run_command("env exists non_default_var1", 0));
+ ut_assert_console_end();
+
+ ut_asserteq(1, run_command("env exists non_default_var2", 0));
+ ut_assert_console_end();
+
+ return 0;
+}
+ENV_TEST(env_test_env_cmd, UT_TESTF_CONSOLE_REC);
+
int do_ut_env(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
struct unit_test *tests = UNIT_TEST_SUITE_START(env_test);
diff --git a/test/image/spl_load_os.c b/test/image/spl_load_os.c
index 7d5fb9b..56105a5 100644
--- a/test/image/spl_load_os.c
+++ b/test/image/spl_load_os.c
@@ -10,63 +10,12 @@
#include <test/spl.h>
#include <test/ut.h>
-/* Context used for this test */
-struct text_ctx {
- int fd;
-};
-
-static ulong read_fit_image(struct spl_load_info *load, ulong offset,
- ulong size, void *buf)
-{
- struct text_ctx *text_ctx = load->priv;
- off_t ret;
- ssize_t res;
-
- ret = os_lseek(text_ctx->fd, offset, OS_SEEK_SET);
- if (ret != offset) {
- printf("Failed to seek to %zx, got %zx (errno=%d)\n", offset,
- ret, errno);
- return 0;
- }
-
- res = os_read(text_ctx->fd, buf, size);
- if (res == -1) {
- printf("Failed to read %lx bytes, got %ld (errno=%d)\n",
- size, res, errno);
- return 0;
- }
-
- return size;
-}
-
static int spl_test_load(struct unit_test_state *uts)
{
struct spl_image_info image;
- struct legacy_img_hdr *header;
- struct text_ctx text_ctx;
- struct spl_load_info load;
char fname[256];
- int ret;
- int fd;
-
- memset(&load, '\0', sizeof(load));
- spl_set_bl_len(&load, 512);
- load.read = read_fit_image;
-
- ret = sandbox_find_next_phase(fname, sizeof(fname), true);
- if (ret)
- ut_assertf(0, "%s not found, error %d\n", fname, ret);
-
- header = spl_get_load_buffer(-sizeof(*header), sizeof(*header));
-
- fd = os_open(fname, OS_O_RDONLY);
- ut_assert(fd >= 0);
- ut_asserteq(512, os_read(fd, header, 512));
- text_ctx.fd = fd;
-
- load.priv = &text_ctx;
- ut_assertok(spl_load_simple_fit(&image, &load, 0, header));
+ ut_assertok(sandbox_spl_load_fit(fname, sizeof(fname), &image));
return 0;
}
diff --git a/test/lib/Makefile b/test/lib/Makefile
index e75a263..70f14c4 100644
--- a/test/lib/Makefile
+++ b/test/lib/Makefile
@@ -5,6 +5,7 @@
ifeq ($(CONFIG_SPL_BUILD),)
obj-y += cmd_ut_lib.o
obj-y += abuf.o
+obj-y += alist.o
obj-$(CONFIG_EFI_LOADER) += efi_device_path.o
obj-$(CONFIG_EFI_SECURE_BOOT) += efi_image_region.o
obj-y += hexdump.o
diff --git a/test/lib/alist.c b/test/lib/alist.c
new file mode 100644
index 0000000..d41845c
--- /dev/null
+++ b/test/lib/alist.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2023 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <alist.h>
+#include <string.h>
+#include <test/lib.h>
+#include <test/test.h>
+#include <test/ut.h>
+
+struct my_struct {
+ uint val;
+ uint other_val;
+};
+
+enum {
+ obj_size = sizeof(struct my_struct),
+};
+
+/* Test alist_init() */
+static int lib_test_alist_init(struct unit_test_state *uts)
+{
+ struct alist lst;
+ ulong start;
+
+ start = ut_check_free();
+
+ /* with a size of 0, the fields should be inited, with no memory used */
+ memset(&lst, '\xff', sizeof(lst));
+ ut_assert(alist_init_struct(&lst, struct my_struct));
+ ut_asserteq_ptr(NULL, lst.data);
+ ut_asserteq(0, lst.count);
+ ut_asserteq(0, lst.alloc);
+ ut_assertok(ut_check_delta(start));
+ alist_uninit(&lst);
+ ut_asserteq_ptr(NULL, lst.data);
+ ut_asserteq(0, lst.count);
+ ut_asserteq(0, lst.alloc);
+
+ /* use an impossible size */
+ ut_asserteq(false, alist_init(&lst, obj_size,
+ CONFIG_SYS_MALLOC_LEN));
+ ut_assertnull(lst.data);
+ ut_asserteq(0, lst.count);
+ ut_asserteq(0, lst.alloc);
+
+ /* use a small size */
+ ut_assert(alist_init(&lst, obj_size, 4));
+ ut_assertnonnull(lst.data);
+ ut_asserteq(0, lst.count);
+ ut_asserteq(4, lst.alloc);
+
+ /* free it */
+ alist_uninit(&lst);
+ ut_asserteq_ptr(NULL, lst.data);
+ ut_asserteq(0, lst.count);
+ ut_asserteq(0, lst.alloc);
+ ut_assertok(ut_check_delta(start));
+
+ /* Check for memory leaks */
+ ut_assertok(ut_check_delta(start));
+
+ return 0;
+}
+LIB_TEST(lib_test_alist_init, 0);
+
+/* Test alist_get() and alist_getd() */
+static int lib_test_alist_get(struct unit_test_state *uts)
+{
+ struct alist lst;
+ ulong start;
+ void *ptr;
+
+ start = ut_check_free();
+
+ ut_assert(alist_init(&lst, obj_size, 3));
+ ut_asserteq(0, lst.count);
+ ut_asserteq(3, lst.alloc);
+
+ ut_assertnull(alist_get_ptr(&lst, 2));
+ ut_assertnull(alist_get_ptr(&lst, 3));
+
+ ptr = alist_ensure_ptr(&lst, 1);
+ ut_assertnonnull(ptr);
+ ut_asserteq(2, lst.count);
+ ptr = alist_ensure_ptr(&lst, 2);
+ ut_asserteq(3, lst.count);
+ ut_assertnonnull(ptr);
+
+ ptr = alist_ensure_ptr(&lst, 3);
+ ut_assertnonnull(ptr);
+ ut_asserteq(4, lst.count);
+ ut_asserteq(6, lst.alloc);
+
+ ut_assertnull(alist_get_ptr(&lst, 4));
+
+ alist_uninit(&lst);
+
+ /* Check for memory leaks */
+ ut_assertok(ut_check_delta(start));
+
+ return 0;
+}
+LIB_TEST(lib_test_alist_get, 0);
+
+/* Test alist_has() */
+static int lib_test_alist_has(struct unit_test_state *uts)
+{
+ struct alist lst;
+ ulong start;
+ void *ptr;
+
+ start = ut_check_free();
+
+ ut_assert(alist_init(&lst, obj_size, 3));
+
+ ut_assert(!alist_has(&lst, 0));
+ ut_assert(!alist_has(&lst, 1));
+ ut_assert(!alist_has(&lst, 2));
+ ut_assert(!alist_has(&lst, 3));
+
+ /* create a new one to force expansion */
+ ptr = alist_ensure_ptr(&lst, 4);
+ ut_assertnonnull(ptr);
+
+ ut_assert(alist_has(&lst, 0));
+ ut_assert(alist_has(&lst, 1));
+ ut_assert(alist_has(&lst, 2));
+ ut_assert(alist_has(&lst, 3));
+ ut_assert(alist_has(&lst, 4));
+ ut_assert(!alist_has(&lst, 5));
+
+ alist_uninit(&lst);
+
+ /* Check for memory leaks */
+ ut_assertok(ut_check_delta(start));
+
+ return 0;
+}
+LIB_TEST(lib_test_alist_has, 0);
+
+/* Test alist_ensure() */
+static int lib_test_alist_ensure(struct unit_test_state *uts)
+{
+ struct my_struct *ptr3, *ptr4;
+ struct alist lst;
+ ulong start;
+
+ start = ut_check_free();
+
+ ut_assert(alist_init_struct(&lst, struct my_struct));
+ ut_asserteq(obj_size, lst.obj_size);
+ ut_asserteq(0, lst.count);
+ ut_asserteq(0, lst.alloc);
+ ptr3 = alist_ensure_ptr(&lst, 3);
+ ut_asserteq(4, lst.count);
+ ut_asserteq(4, lst.alloc);
+ ut_assertnonnull(ptr3);
+ ptr3->val = 3;
+
+ ptr4 = alist_ensure_ptr(&lst, 4);
+ ut_asserteq(8, lst.alloc);
+ ut_asserteq(5, lst.count);
+ ut_assertnonnull(ptr4);
+ ptr4->val = 4;
+ ut_asserteq(4, alist_get(&lst, 4, struct my_struct)->val);
+
+ ut_asserteq_ptr(ptr4, alist_ensure(&lst, 4, struct my_struct));
+
+ alist_ensure(&lst, 4, struct my_struct)->val = 44;
+ ut_asserteq(44, alist_get(&lst, 4, struct my_struct)->val);
+ ut_asserteq(3, alist_get(&lst, 3, struct my_struct)->val);
+ ut_assertnull(alist_get(&lst, 7, struct my_struct));
+ ut_asserteq(8, lst.alloc);
+ ut_asserteq(5, lst.count);
+
+ /* add some more, checking handling of malloc() failure */
+ malloc_enable_testing(0);
+ ut_assertnonnull(alist_ensure(&lst, 7, struct my_struct));
+ ut_assertnull(alist_ensure(&lst, 8, struct my_struct));
+ malloc_disable_testing();
+
+ lst.flags &= ~ALISTF_FAIL;
+ ut_assertnonnull(alist_ensure(&lst, 8, struct my_struct));
+ ut_asserteq(16, lst.alloc);
+ ut_asserteq(9, lst.count);
+
+ alist_uninit(&lst);
+
+ /* Check for memory leaks */
+ ut_assertok(ut_check_delta(start));
+
+ return 0;
+}
+LIB_TEST(lib_test_alist_ensure, 0);
+
+/* Test alist_add() bits not tested by lib_test_alist_ensure() */
+static int lib_test_alist_add(struct unit_test_state *uts)
+{
+ struct my_struct data, *ptr, *ptr2;
+ const struct my_struct *chk;
+ struct alist lst;
+ ulong start;
+
+ start = ut_check_free();
+
+ ut_assert(alist_init_struct(&lst, struct my_struct));
+
+ data.val = 123;
+ data.other_val = 456;
+ ptr = alist_add(&lst, data);
+ ut_assertnonnull(ptr);
+ ut_asserteq(4, lst.alloc);
+ ut_asserteq(1, lst.count);
+
+ ut_asserteq(123, ptr->val);
+ ut_asserteq(456, ptr->other_val);
+
+ ptr2 = alist_add_placeholder(&lst);
+ ut_assertnonnull(ptr2);
+
+ ptr2->val = 321;
+ ptr2->other_val = 654;
+
+ chk = alist_get(&lst, 1, struct my_struct);
+ ut_asserteq(321, chk->val);
+ ut_asserteq(654, chk->other_val);
+
+ ptr2 = alist_getw(&lst, 1, struct my_struct);
+ ut_asserteq(321, ptr2->val);
+ ut_asserteq(654, ptr2->other_val);
+
+ alist_uninit(&lst);
+
+ /* Check for memory leaks */
+ ut_assertok(ut_check_delta(start));
+
+ return 0;
+}
+LIB_TEST(lib_test_alist_add, 0);
diff --git a/test/py/tests/test_upl.py b/test/py/tests/test_upl.py
new file mode 100644
index 0000000..3164bda
--- /dev/null
+++ b/test/py/tests/test_upl.py
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright 2024 Google LLC
+#
+# Test addition of Universal Payload
+
+import os
+
+import pytest
+import u_boot_utils
+
+@pytest.mark.boardspec('sandbox_vpl')
+def test_upl_handoff(u_boot_console):
+ """Test of UPL handoff
+
+ This works by starting up U-Boot VPL, which gets to SPL and then sets up a
+ UPL handoff using the FIT containing U-Boot proper. It then jumps to U-Boot
+ proper and runs a test to check that the parameters are correct.
+
+ The entire FIT is loaded into memory in SPL (in upl_load_from_image()) so
+ that it can be inpected in upl_test_info_norun
+ """
+ cons = u_boot_console
+ ram = os.path.join(cons.config.build_dir, 'ram.bin')
+ fdt = os.path.join(cons.config.build_dir, 'u-boot.dtb')
+
+ # Remove any existing RAM file, so we don't have old data present
+ if os.path.exists(ram):
+ os.remove(ram)
+ flags = ['-m', ram, '-d', fdt, '--upl']
+ cons.restart_uboot_with_flags(flags, use_dtb=False)
+
+ # Make sure that Universal Payload is detected in U-Boot proper
+ output = cons.run_command('upl info')
+ assert 'UPL state: active' == output
+
+ # Check the FIT offsets look correct
+ output = cons.run_command('ut upl -f upl_test_info_norun')
+ assert 'Failures: 0' in output
diff --git a/test/str_ut.c b/test/str_ut.c
index 3897798..96e0489 100644
--- a/test/str_ut.c
+++ b/test/str_ut.c
@@ -342,9 +342,7 @@
ut_asserteq_str("space", ptr[3]);
ut_assertnonnull(ptr[4]);
ut_asserteq_str("", ptr[4]);
- ut_assertnonnull(ptr[5]);
- ut_asserteq_str("", ptr[5]);
- ut_assertnull(ptr[6]);
+ ut_assertnull(ptr[5]);
str_free_list(ptr);
ut_assertok(ut_check_delta(start));
diff --git a/tools/imx8image.c b/tools/imx8image.c
index 76d0cd6..5eb4b96 100644
--- a/tools/imx8image.c
+++ b/tools/imx8image.c
@@ -57,6 +57,7 @@
static table_entry_t imx8image_core_entries[] = {
{CFG_SCU, "SCU", "scu core", },
+ {CFG_PWR, "PWR", "uPower core", },
{CFG_M40, "M40", "M4 core 0", },
{CFG_M41, "M41", "M4 core 1", },
{CFG_A35, "A35", "A35 core", },
@@ -119,7 +120,7 @@
} else if (!strncmp(token, "IMX8QM", 6)) {
soc = QM;
} else if (!strncmp(token, "ULP", 3)) {
- soc = IMX9;
+ soc = ULP;
} else if (!strncmp(token, "IMX9", 4)) {
soc = IMX9;
} else {
@@ -181,6 +182,10 @@
param_stack[p_idx].option = SCFW;
param_stack[p_idx++].filename = token;
break;
+ case CFG_PWR:
+ param_stack[p_idx].option = UPOWER;
+ param_stack[p_idx++].filename = token;
+ break;
case CFG_M40:
param_stack[p_idx].option = M40;
param_stack[p_idx].ext = 0;
diff --git a/tools/sunxi_toc0.c b/tools/sunxi_toc0.c
index 292649f..7669364 100644
--- a/tools/sunxi_toc0.c
+++ b/tools/sunxi_toc0.c
@@ -444,7 +444,7 @@
/* If a digest was provided, compare it to the embedded digest. */
extension = &totalSequence->mainSequence.explicit3.extension;
- if (digest && memcmp(&extension->digest, digest, SHA256_DIGEST_LENGTH)) {
+ if (memcmp(&extension->digest, digest, SHA256_DIGEST_LENGTH)) {
pr_err("Wrong firmware digest in certificate\n");
goto err;
}
