| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2018 NXP |
| * Peng Fan <peng.fan@nxp.com> |
| */ |
| |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <firmware/imx/sci/sci.h> |
| #include <asm/arch/clock.h> |
| #include <dt-bindings/clock/imx8qm-clock.h> |
| #include <dt-bindings/soc/imx_rsrc.h> |
| #include <misc.h> |
| |
| #include "clk-imx8.h" |
| |
| #if IS_ENABLED(CONFIG_CMD_CLK) |
| struct imx8_clks imx8_clk_names[] = { |
| { IMX8QM_A53_DIV, "A53_DIV" }, |
| { IMX8QM_UART0_CLK, "UART0" }, |
| { IMX8QM_UART1_CLK, "UART1" }, |
| { IMX8QM_UART2_CLK, "UART2" }, |
| { IMX8QM_UART3_CLK, "UART3" }, |
| { IMX8QM_SDHC0_CLK, "SDHC0" }, |
| { IMX8QM_SDHC1_CLK, "SDHC1" }, |
| { IMX8QM_SDHC2_CLK, "SDHC2" }, |
| { IMX8QM_ENET0_AHB_CLK, "ENET0_AHB" }, |
| { IMX8QM_ENET0_IPG_CLK, "ENET0_IPG" }, |
| { IMX8QM_ENET0_REF_DIV, "ENET0_REF" }, |
| { IMX8QM_ENET0_PTP_CLK, "ENET0_PTP" }, |
| { IMX8QM_ENET1_AHB_CLK, "ENET1_AHB" }, |
| { IMX8QM_ENET1_IPG_CLK, "ENET1_IPG" }, |
| { IMX8QM_ENET1_REF_DIV, "ENET1_REF" }, |
| { IMX8QM_ENET1_PTP_CLK, "ENET1_PTP" }, |
| }; |
| |
| int num_clks = ARRAY_SIZE(imx8_clk_names); |
| #endif |
| |
| ulong imx8_clk_get_rate(struct clk *clk) |
| { |
| sc_pm_clk_t pm_clk; |
| ulong rate; |
| u16 resource; |
| int ret; |
| |
| debug("%s(#%lu)\n", __func__, clk->id); |
| |
| switch (clk->id) { |
| case IMX8QM_A53_DIV: |
| resource = SC_R_A53; |
| pm_clk = SC_PM_CLK_CPU; |
| break; |
| case IMX8QM_I2C0_IPG_CLK: |
| case IMX8QM_I2C0_CLK: |
| case IMX8QM_I2C0_DIV: |
| resource = SC_R_I2C_0; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_I2C1_IPG_CLK: |
| case IMX8QM_I2C1_CLK: |
| case IMX8QM_I2C1_DIV: |
| resource = SC_R_I2C_1; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_I2C2_IPG_CLK: |
| case IMX8QM_I2C2_CLK: |
| case IMX8QM_I2C2_DIV: |
| resource = SC_R_I2C_2; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_I2C3_IPG_CLK: |
| case IMX8QM_I2C3_CLK: |
| case IMX8QM_I2C3_DIV: |
| resource = SC_R_I2C_3; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_SDHC0_IPG_CLK: |
| case IMX8QM_SDHC0_CLK: |
| case IMX8QM_SDHC0_DIV: |
| resource = SC_R_SDHC_0; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_SDHC1_IPG_CLK: |
| case IMX8QM_SDHC1_CLK: |
| case IMX8QM_SDHC1_DIV: |
| resource = SC_R_SDHC_1; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_SDHC2_IPG_CLK: |
| case IMX8QM_SDHC2_CLK: |
| case IMX8QM_SDHC2_DIV: |
| resource = SC_R_SDHC_2; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_UART0_CLK: |
| case IMX8QM_UART0_IPG_CLK: |
| resource = SC_R_UART_0; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_UART1_CLK: |
| case IMX8QM_UART1_IPG_CLK: |
| resource = SC_R_UART_1; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_UART2_CLK: |
| case IMX8QM_UART2_IPG_CLK: |
| resource = SC_R_UART_2; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_UART3_CLK: |
| case IMX8QM_UART3_IPG_CLK: |
| resource = SC_R_UART_3; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_ENET0_IPG_CLK: |
| case IMX8QM_ENET0_AHB_CLK: |
| case IMX8QM_ENET0_REF_DIV: |
| case IMX8QM_ENET0_PTP_CLK: |
| resource = SC_R_ENET_0; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_ENET1_IPG_CLK: |
| case IMX8QM_ENET1_AHB_CLK: |
| case IMX8QM_ENET1_REF_DIV: |
| case IMX8QM_ENET1_PTP_CLK: |
| resource = SC_R_ENET_1; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| default: |
| if (clk->id < IMX8QM_UART0_IPG_CLK || |
| clk->id >= IMX8QM_CLK_END) { |
| printf("%s(Invalid clk ID #%lu)\n", |
| __func__, clk->id); |
| return -EINVAL; |
| } |
| return -EINVAL; |
| }; |
| |
| ret = sc_pm_get_clock_rate(-1, resource, pm_clk, |
| (sc_pm_clock_rate_t *)&rate); |
| if (ret) { |
| printf("%s err %d\n", __func__, ret); |
| return ret; |
| } |
| |
| return rate; |
| } |
| |
| ulong imx8_clk_set_rate(struct clk *clk, unsigned long rate) |
| { |
| sc_pm_clk_t pm_clk; |
| u32 new_rate = rate; |
| u16 resource; |
| int ret; |
| |
| debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate); |
| |
| switch (clk->id) { |
| case IMX8QM_I2C0_IPG_CLK: |
| case IMX8QM_I2C0_CLK: |
| case IMX8QM_I2C0_DIV: |
| resource = SC_R_I2C_0; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_I2C1_IPG_CLK: |
| case IMX8QM_I2C1_CLK: |
| case IMX8QM_I2C1_DIV: |
| resource = SC_R_I2C_1; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_I2C2_IPG_CLK: |
| case IMX8QM_I2C2_CLK: |
| case IMX8QM_I2C2_DIV: |
| resource = SC_R_I2C_2; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_I2C3_IPG_CLK: |
| case IMX8QM_I2C3_CLK: |
| case IMX8QM_I2C3_DIV: |
| resource = SC_R_I2C_3; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_UART0_CLK: |
| case IMX8QM_UART0_IPG_CLK: |
| resource = SC_R_UART_0; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_UART1_CLK: |
| case IMX8QM_UART1_IPG_CLK: |
| resource = SC_R_UART_1; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_UART2_CLK: |
| case IMX8QM_UART2_IPG_CLK: |
| resource = SC_R_UART_2; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_UART3_CLK: |
| case IMX8QM_UART3_IPG_CLK: |
| resource = SC_R_UART_3; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_SDHC0_IPG_CLK: |
| case IMX8QM_SDHC0_CLK: |
| case IMX8QM_SDHC0_DIV: |
| resource = SC_R_SDHC_0; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_SDHC1_IPG_CLK: |
| case IMX8QM_SDHC1_CLK: |
| case IMX8QM_SDHC1_DIV: |
| resource = SC_R_SDHC_1; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_SDHC2_IPG_CLK: |
| case IMX8QM_SDHC2_CLK: |
| case IMX8QM_SDHC2_DIV: |
| resource = SC_R_SDHC_2; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_ENET0_IPG_CLK: |
| case IMX8QM_ENET0_AHB_CLK: |
| case IMX8QM_ENET0_REF_DIV: |
| case IMX8QM_ENET0_PTP_CLK: |
| case IMX8QM_ENET0_ROOT_DIV: |
| resource = SC_R_ENET_0; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_ENET1_IPG_CLK: |
| case IMX8QM_ENET1_AHB_CLK: |
| case IMX8QM_ENET1_REF_DIV: |
| case IMX8QM_ENET1_PTP_CLK: |
| case IMX8QM_ENET1_ROOT_DIV: |
| resource = SC_R_ENET_1; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| default: |
| if (clk->id < IMX8QM_UART0_IPG_CLK || |
| clk->id >= IMX8QM_CLK_END) { |
| printf("%s(Invalid clk ID #%lu)\n", |
| __func__, clk->id); |
| return -EINVAL; |
| } |
| return -EINVAL; |
| }; |
| |
| ret = sc_pm_set_clock_rate(-1, resource, pm_clk, &new_rate); |
| if (ret) { |
| printf("%s err %d\n", __func__, ret); |
| return ret; |
| } |
| |
| return new_rate; |
| } |
| |
| int __imx8_clk_enable(struct clk *clk, bool enable) |
| { |
| sc_pm_clk_t pm_clk; |
| u16 resource; |
| int ret; |
| |
| debug("%s(#%lu)\n", __func__, clk->id); |
| |
| switch (clk->id) { |
| case IMX8QM_I2C0_IPG_CLK: |
| case IMX8QM_I2C0_CLK: |
| case IMX8QM_I2C0_DIV: |
| resource = SC_R_I2C_0; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_I2C1_IPG_CLK: |
| case IMX8QM_I2C1_CLK: |
| case IMX8QM_I2C1_DIV: |
| resource = SC_R_I2C_1; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_I2C2_IPG_CLK: |
| case IMX8QM_I2C2_CLK: |
| case IMX8QM_I2C2_DIV: |
| resource = SC_R_I2C_2; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_I2C3_IPG_CLK: |
| case IMX8QM_I2C3_CLK: |
| case IMX8QM_I2C3_DIV: |
| resource = SC_R_I2C_3; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_UART0_CLK: |
| case IMX8QM_UART0_IPG_CLK: |
| resource = SC_R_UART_0; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_UART1_CLK: |
| case IMX8QM_UART1_IPG_CLK: |
| resource = SC_R_UART_1; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_UART2_CLK: |
| case IMX8QM_UART2_IPG_CLK: |
| resource = SC_R_UART_2; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_UART3_CLK: |
| case IMX8QM_UART3_IPG_CLK: |
| resource = SC_R_UART_3; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_SDHC0_IPG_CLK: |
| case IMX8QM_SDHC0_CLK: |
| case IMX8QM_SDHC0_DIV: |
| resource = SC_R_SDHC_0; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_SDHC1_IPG_CLK: |
| case IMX8QM_SDHC1_CLK: |
| case IMX8QM_SDHC1_DIV: |
| resource = SC_R_SDHC_1; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_SDHC2_IPG_CLK: |
| case IMX8QM_SDHC2_CLK: |
| case IMX8QM_SDHC2_DIV: |
| resource = SC_R_SDHC_2; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_ENET0_IPG_CLK: |
| case IMX8QM_ENET0_AHB_CLK: |
| case IMX8QM_ENET0_REF_DIV: |
| case IMX8QM_ENET0_PTP_CLK: |
| resource = SC_R_ENET_0; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| case IMX8QM_ENET1_IPG_CLK: |
| case IMX8QM_ENET1_AHB_CLK: |
| case IMX8QM_ENET1_REF_DIV: |
| case IMX8QM_ENET1_PTP_CLK: |
| resource = SC_R_ENET_1; |
| pm_clk = SC_PM_CLK_PER; |
| break; |
| default: |
| if (clk->id < IMX8QM_UART0_IPG_CLK || |
| clk->id >= IMX8QM_CLK_END) { |
| printf("%s(Invalid clk ID #%lu)\n", |
| __func__, clk->id); |
| return -EINVAL; |
| } |
| return -EINVAL; |
| } |
| |
| ret = sc_pm_clock_enable(-1, resource, pm_clk, enable, 0); |
| if (ret) { |
| printf("%s err %d\n", __func__, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |