common/cmd_usb.c - filogic/uboot - Gitiles

 /*
  * (C) Copyright 2001
  * Denis Peter, MPL AG Switzerland
  *
  * Most of this source has been derived from the Linux USB
  * project.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  *
  */

 #include <common.h>
 #include <command.h>

 #if (CONFIG_COMMANDS & CFG_CMD_USB)

 #include <usb.h>

 #ifdef CONFIG_USB_STORAGE
 static int usb_stor_curr_dev=-1; /* current device */
 #endif

 /* some display routines (info command) */
 char * usb_get_class_desc(unsigned char dclass)
 {
 	switch(dclass) {
 		case USB_CLASS_PER_INTERFACE:
 			return("See Interface");
 		case USB_CLASS_AUDIO:
 			return("Audio");
 		case USB_CLASS_COMM:
 			return("Communication");
 		case USB_CLASS_HID:
 			return("Human Interface");
 		case USB_CLASS_PRINTER:
 			return("Printer");
 		case USB_CLASS_MASS_STORAGE:
 			return("Mass Storage");
 		case USB_CLASS_HUB:
 			return("Hub");
 		case USB_CLASS_DATA:
 			return("CDC Data");
 		case USB_CLASS_VENDOR_SPEC:
 			return("Vendor specific");
 		default :
 			return("");
 	}
 }

 void usb_display_class_sub(unsigned char dclass,unsigned char subclass,unsigned char proto)
 {
 	switch(dclass) {
 		case USB_CLASS_PER_INTERFACE:
 			printf("See Interface");
 			break;
 		case USB_CLASS_HID:
 			printf("Human Interface, Subclass: ");
 			switch(subclass) {
 				case USB_SUB_HID_NONE:
 					printf("None");
 					break;
 				case USB_SUB_HID_BOOT:
 					printf("Boot ");
 					switch(proto) {
 						case USB_PROT_HID_NONE:
 							printf("None");
 							break;
 						case USB_PROT_HID_KEYBOARD:
 							printf("Keyboard");
 							break;
 						case USB_PROT_HID_MOUSE:
 							printf("Mouse");
 							break;
 						default:
 							printf("reserved");
 					}
 					break;
 				default:
 					printf("reserved");
 			}
 			break;
 		case USB_CLASS_MASS_STORAGE:
 			printf("Mass Storage, ");
 			switch(subclass) {
 				case US_SC_RBC:
 					printf("RBC ");
 					break;
 				case US_SC_8020:
 					printf("SFF-8020i (ATAPI)");
 					break;
 				case US_SC_QIC:
 					printf("QIC-157 (Tape)");
 					break;
 				case US_SC_UFI:
 					printf("UFI");
 					break;
 				case US_SC_8070:
 					printf("SFF-8070");
 					break;
 				case US_SC_SCSI:
 					printf("Transp. SCSI");
 					break;
 				default:
 					printf("reserved");
 					break;
 			}
 			printf(", ");
 			switch(proto) {
 				case US_PR_CB:
 					printf("Command/Bulk");
 					break;
 				case US_PR_CBI:
 					printf("Command/Bulk/Int");
 					break;
 				case US_PR_BULK:
 					printf("Bulk only");
 					break;
 				default:
 					printf("reserved");
 			}
 			break;
 		default:
 			printf("%s",usb_get_class_desc(dclass));
 	}
 }

 void usb_display_string(struct usb_device *dev,int index)
 {
 	char buffer[256];
 	if (index!=0) {
 		if (usb_string(dev,index,&buffer[0],256)>0);
 			printf("String: \"%s\"",buffer);
 	}
 }

 void usb_display_desc(struct usb_device *dev)
 {
 	if (dev->descriptor.bDescriptorType==USB_DT_DEVICE) {
 		printf("%d: %s,  USB Revision %x.%x\n",dev->devnum,usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass),
 			(dev->descriptor.bcdUSB>>8) & 0xff,dev->descriptor.bcdUSB & 0xff);
 		if (strlen(dev->mf) || strlen(dev->prod) || strlen(dev->serial))
 			printf(" - %s %s %s\n",dev->mf,dev->prod,dev->serial);
 		if (dev->descriptor.bDeviceClass) {
 			printf(" - Class: ");
 			usb_display_class_sub(dev->descriptor.bDeviceClass,dev->descriptor.bDeviceSubClass,dev->descriptor.bDeviceProtocol);
 			printf("\n");
 		}
 		else {
 			printf(" - Class: (from Interface) %s\n",usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass));
 		}
 		printf(" - PacketSize: %d  Configurations: %d\n",dev->descriptor.bMaxPacketSize0,dev->descriptor.bNumConfigurations);
 		printf(" - Vendor: 0x%04x  Product 0x%04x Version %d.%d\n",dev->descriptor.idVendor,dev->descriptor.idProduct,(dev->descriptor.bcdDevice>>8) & 0xff,dev->descriptor.bcdDevice & 0xff);
 	}

 }

 void usb_display_conf_desc(struct usb_config_descriptor *config,struct usb_device *dev)
 {
 	printf("   Configuration: %d\n",config->bConfigurationValue);
 	printf("   - Interfaces: %d %s%s%dmA\n",config->bNumInterfaces,(config->bmAttributes & 0x40) ? "Self Powered " : "Bus Powered ",
 	(config->bmAttributes & 0x20) ? "Remote Wakeup " : "",config->MaxPower*2);
 	if (config->iConfiguration) {
 		printf("   - ");
 		usb_display_string(dev,config->iConfiguration);
 		printf("\n");
 	}
 }

 void usb_display_if_desc(struct usb_interface_descriptor *ifdesc,struct usb_device *dev)
 {
 	printf("     Interface: %d\n",ifdesc->bInterfaceNumber);
 	printf("     - Alternate Settings %d, Endpoints: %d\n",ifdesc->bAlternateSetting,ifdesc->bNumEndpoints);
 	printf("     - Class ");
 	usb_display_class_sub(ifdesc->bInterfaceClass,ifdesc->bInterfaceSubClass,ifdesc->bInterfaceProtocol);
 	printf("\n");
 	if (ifdesc->iInterface) {
 		printf("     - ");
 		usb_display_string(dev,ifdesc->iInterface);
 		printf("\n");
 	}
 }

 void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc)
 {
 	printf("     - Endpoint %d %s ",epdesc->bEndpointAddress & 0xf,(epdesc->bEndpointAddress & 0x80) ? "In" : "Out");
 	switch((epdesc->bmAttributes & 0x03))
 	{
 		case 0: printf("Control"); break;
 		case 1: printf("Isochronous"); break;
 		case 2: printf("Bulk"); break;
 		case 3: printf("Interrupt"); break;
 	}
 	printf(" MaxPacket %d",epdesc->wMaxPacketSize);
 	if ((epdesc->bmAttributes & 0x03)==0x3)
 		printf(" Interval %dms",epdesc->bInterval);
 	printf("\n");
 }

 /* main routine to diasplay the configs, interfaces and endpoints */
 void usb_display_config(struct usb_device *dev)
 {
 	struct usb_config_descriptor *config;
 	struct usb_interface_descriptor *ifdesc;
 	struct usb_endpoint_descriptor *epdesc;
 	int i,ii;

 	config= &dev->config;
 	usb_display_conf_desc(config,dev);
 	for(i=0;i<config->no_of_if;i++) {
 		ifdesc= &config->if_desc[i];
 		usb_display_if_desc(ifdesc,dev);
 		for(ii=0;ii<ifdesc->no_of_ep;ii++) {
 			epdesc= &ifdesc->ep_desc[ii];
 			usb_display_ep_desc(epdesc);
 		}
 	}
 	printf("\n");
 }

 /* shows the device tree recursively */
 void usb_show_tree_graph(struct usb_device *dev,char *pre)
 {
 	int i,index;
 	int has_child,last_child,port;

 	index=strlen(pre);
 	printf(" %s",pre);
 	/* check if the device has connected children */
 	has_child=0;
 	for(i=0;i<dev->maxchild;i++) {
 		if (dev->children[i]!=NULL)
 			has_child=1;
 	}
 	/* check if we are the last one */
 	last_child=1;
 	if (dev->parent!=NULL) {
 		for(i=0;i<dev->parent->maxchild;i++) {
 			/* search for children */
 			if (dev->parent->children[i]==dev) {
 				/* found our pointer, see if we have a little sister */
 				port=i;
 				while(i++<dev->parent->maxchild) {
 					if (dev->parent->children[i]!=NULL) {
 						/* found a sister */
 						last_child=0;
 						break;
 					} /* if */
 				} /* while */
 			} /* device found */
 		} /* for all children of the parent */
 		printf("\b+-");
 		/* correct last child */
 		if (last_child) {
 			pre[index-1]=' ';
 		}
 	} /* if not root hub */
 	else
 		printf(" ");
 	printf("%d ",dev->devnum);
 	pre[index++]=' ';
 	pre[index++]= has_child ? '|' : ' ';
 	pre[index]=0;
 	printf(" %s (%s, %dmA)\n",usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass),
 		dev->slow ? "1.5MBit/s" : "12MBit/s",dev->config.MaxPower * 2);
 	if (strlen(dev->mf) ||
 	   strlen(dev->prod) ||
 	   strlen(dev->serial))
 		printf(" %s  %s %s %s\n",pre,dev->mf,dev->prod,dev->serial);
 	printf(" %s\n",pre);
 	if (dev->maxchild>0) {
 		for(i=0;i<dev->maxchild;i++) {
 			if (dev->children[i]!=NULL) {
 				usb_show_tree_graph(dev->children[i],pre);
 				pre[index]=0;
 			}
 		}
 	}
 }

 /* main routine for the tree command */
 void usb_show_tree(struct usb_device *dev)
 {
 	char preamble[32];

 	memset(preamble,0,32);
 	usb_show_tree_graph(dev,&preamble[0]);
 }


 /******************************************************************************
  * usb boot command intepreter. Derived from diskboot
  */
 #ifdef CONFIG_USB_STORAGE
 int do_usbboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	char *boot_device = NULL;
 	char *ep;
 	int dev, part=1, rcode;
 	ulong addr, cnt, checksum;
 	disk_partition_t info;
 	image_header_t *hdr;
 	block_dev_desc_t *stor_dev;


 	switch (argc) {
 	case 1:
 		addr = CFG_LOAD_ADDR;
 		boot_device = getenv ("bootdevice");
 		break;
 	case 2:
 		addr = simple_strtoul(argv[1], NULL, 16);
 		boot_device = getenv ("bootdevice");
 		break;
 	case 3:
 		addr = simple_strtoul(argv[1], NULL, 16);
 		boot_device = argv[2];
 		break;
 	default:
 		printf ("Usage:\n%s\n", cmdtp->usage);
 		return 1;
 	}

 	if (!boot_device) {
 		puts ("\n** No boot device **\n");
 		return 1;
 	}

 	dev = simple_strtoul(boot_device, &ep, 16);
 	stor_dev=usb_stor_get_dev(dev);
 	if (stor_dev->type == DEV_TYPE_UNKNOWN) {
 		printf ("\n** Device %d not available\n", dev);
 		return 1;
 	}
 	if (stor_dev->block_read==NULL) {
 		printf("storage device not initialized. Use usb scan\n");
 		return 1;
 	}
 	if (*ep) {
 		if (*ep != ':') {
 			puts ("\n** Invalid boot device, use `dev[:part]' **\n");
 			return 1;
 		}
 		part = simple_strtoul(++ep, NULL, 16);
 	}

 	if (get_partition_info (stor_dev, part, &info)) {
 		/* try to boot raw .... */
 		strncpy(&info.type[0], BOOT_PART_TYPE, sizeof(BOOT_PART_TYPE));
 		strncpy(&info.name[0], "Raw", 4);
 		info.start=0;
 		info.blksz=0x200;
 		info.size=2880;
 		printf("error reading partinfo...try to boot raw\n");
 	}
 	if ((strncmp(info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) &&
 	    (strncmp(info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) {
 		printf ("\n** Invalid partition type \"%.32s\""
 			" (expect \"" BOOT_PART_TYPE "\")\n",
 			info.type);
 		return 1;
 	}
 	printf ("\nLoading from USB device %d, partition %d: "
 		"Name: %.32s  Type: %.32s\n",
 		dev, part, info.name, info.type);

 	debug ("First Block: %ld,  # of blocks: %ld, Block Size: %ld\n",
 		info.start, info.size, info.blksz);

 	if (stor_dev->block_read(dev, info.start, 1, (ulong *)addr) != 1) {
 		printf ("** Read error on %d:%d\n", dev, part);
 		return 1;
 	}

 	hdr = (image_header_t *)addr;

 	if (ntohl(hdr->ih_magic) != IH_MAGIC) {
 		printf("\n** Bad Magic Number **\n");
 		return 1;
 	}

 	checksum = ntohl(hdr->ih_hcrc);
 	hdr->ih_hcrc = 0;

 	if (crc32 (0, (char *)hdr, sizeof(image_header_t)) != checksum) {
 		puts ("\n** Bad Header Checksum **\n");
 		return 1;
 	}
 	hdr->ih_hcrc = htonl(checksum);	/* restore checksum for later use */

 	print_image_hdr (hdr);

 	cnt = (ntohl(hdr->ih_size) + sizeof(image_header_t));
 	cnt += info.blksz - 1;
 	cnt /= info.blksz;
 	cnt -= 1;

 	if (stor_dev->block_read (dev, info.start+1, cnt,
 		      (ulong *)(addr+info.blksz)) != cnt) {
 		printf ("\n** Read error on %d:%d\n", dev, part);
 		return 1;
 	}
 	/* Loading ok, update default load address */
 	load_addr = addr;

 	flush_cache (addr, (cnt+1)*info.blksz);

 	/* Check if we should attempt an auto-start */
 	if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) {
 		char *local_args[2];
 		extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
 		local_args[0] = argv[0];
 		local_args[1] = NULL;
 		printf ("Automatic boot of image at addr 0x%08lX ...\n", addr);
 		rcode=do_bootm (cmdtp, 0, 1, local_args);
 		return rcode;
 	}
 	return 0;
 }
 #endif /* CONFIG_USB_STORAGE */


 /*********************************************************************************
  * usb command intepreter
  */
 int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {

 	int i;
 	struct usb_device *dev = NULL;
 #ifdef CONFIG_USB_STORAGE
 	block_dev_desc_t *stor_dev;
 #endif

 	if ((strncmp(argv[1],"reset",5) == 0) ||
 		 (strncmp(argv[1],"start",5) == 0)){
 		usb_stop();
 		printf("(Re)start USB...\n");
 		usb_init();
 		return 0;
 	}
 	if (strncmp(argv[1],"stop",4) == 0) {
 #ifdef CONFIG_USB_KEYBOARD
 		if (argc==2) {
 			if (usb_kbd_deregister()!=0) {
 				printf("USB not stopped: usbkbd still using USB\n");
 				return 1;
 			}
 		}
 		else { /* forced stop, switch console in to serial */
 			console_assign(stdin,"serial");
 			usb_kbd_deregister();
 		}
 #endif
 		printf("stopping USB..\n");
 		usb_stop();
 		return 0;
 	}
 	if (strncmp(argv[1],"tree",4) == 0) {
 		printf("\nDevice Tree:\n");
 		usb_show_tree(usb_get_dev_index(0));
 		return 0;
 	}
 	if (strncmp(argv[1],"inf",3) == 0) {
 		int d;
 		if (argc==2) {
 			for(d=0;d<USB_MAX_DEVICE;d++) {
 				dev=usb_get_dev_index(d);
 				if (dev==NULL)
 					break;
 				usb_display_desc(dev);
 				usb_display_config(dev);
 			}
 			return 0;
 		}
 		else {
 			int d;

 			i=simple_strtoul(argv[2], NULL, 16);
 			printf("config for device %d\n",i);
 			for(d=0;d<USB_MAX_DEVICE;d++) {
 				dev=usb_get_dev_index(d);
 				if (dev==NULL)
 					break;
 				if (dev->devnum==i)
 					break;
 			}
 			if (dev==NULL) {
 				printf("*** NO Device avaiable ***\n");
 				return 0;
 			}
 			else {
 				usb_display_desc(dev);
 				usb_display_config(dev);
 			}
 		}
 		return 0;
 	}
 #ifdef CONFIG_USB_STORAGE
 	if (strncmp(argv[1],"scan",4) == 0) {
 		printf("Scan for storage device:\n");
 	 	usb_stor_curr_dev=usb_stor_scan(1);
 		if (usb_stor_curr_dev==-1) {
 			printf("No device found. Not initialized?\n");
 			return 1;
 		}
 		return 0;
 	}
 	if (strncmp(argv[1],"part",4) == 0) {
 		int devno, ok;
 		for (ok=0, devno=0; devno<USB_MAX_STOR_DEV; ++devno) {
 			stor_dev=usb_stor_get_dev(devno);
 			if (stor_dev->type!=DEV_TYPE_UNKNOWN) {
 				ok++;
 				if (devno)
 					printf("\n");
 				printf("print_part of %x\n",devno);
 				print_part(stor_dev);
 			}
 		}
 		if (!ok) {
 			printf("\nno USB devices available\n");
 			return 1;
 		}
 		return 0;
 	}
 	if (strcmp(argv[1],"read") == 0) {
 		if (usb_stor_curr_dev<0) {
 			printf("no current device selected\n");
 			return 1;
 		}
 		if (argc==5) {
 			unsigned long addr = simple_strtoul(argv[2], NULL, 16);
 			unsigned long blk  = simple_strtoul(argv[3], NULL, 16);
 			unsigned long cnt  = simple_strtoul(argv[4], NULL, 16);
 			unsigned long n;
 			printf ("\nUSB read: device %d block # %ld, count %ld ... ",
 					usb_stor_curr_dev, blk, cnt);
 			stor_dev=usb_stor_get_dev(usb_stor_curr_dev);
 			n = stor_dev->block_read(usb_stor_curr_dev, blk, cnt, (ulong *)addr);
 			printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR");
 			if (n==cnt)
 				return 0;
 			return 1;
 		}
 	}
 	if (strcmp(argv[1],"dev") == 0) {
 		if (argc==3) {
 			int dev = (int)simple_strtoul(argv[2], NULL, 10);
 			printf ("\nUSB device %d: ", dev);
 			if (dev >= USB_MAX_STOR_DEV) {
 				printf("unknown device\n");
 				return 1;
 			}
 			printf ("\n    Device %d: ", dev);
 			stor_dev=usb_stor_get_dev(dev);
 			dev_print(stor_dev);
 			if (stor_dev->type == DEV_TYPE_UNKNOWN) {
 				return 1;
 			}
 			usb_stor_curr_dev = dev;
 			printf("... is now current device\n");
 			return 0;
 		}
 		else {
 			printf ("\nUSB device %d: ", usb_stor_curr_dev);
 			stor_dev=usb_stor_get_dev(usb_stor_curr_dev);
 			dev_print(stor_dev);
 			if (stor_dev->type == DEV_TYPE_UNKNOWN) {
 				return 1;
 			}
 			return 0;
 		}
 		return 0;
 	}
 #endif /* CONFIG_USB_STORAGE */
 	printf ("Usage:\n%s\n", cmdtp->usage);
 	return 1;
 }


 #endif /* (CONFIG_COMMANDS & CFG_CMD_USB) */


 #if (CONFIG_COMMANDS & CFG_CMD_USB)

 #ifdef CONFIG_USB_STORAGE
 U_BOOT_CMD(
 	usb,	5,	1,	do_usb,
 	"usb     - USB sub-system\n",
 	"reset - reset (rescan) USB controller\n"
 	"usb stop [f]  - stop USB [f]=force stop\n"
 	"usb tree  - show USB device tree\n"
 	"usb info [dev] - show available USB devices\n"
 	"usb scan  - (re-)scan USB bus for storage devices\n"
 	"usb device [dev] - show or set current USB storage device\n"
 	"usb part [dev] - print partition table of one or all USB storage devices\n"
 	"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
 	"    to memory address `addr'\n"
 );


 U_BOOT_CMD(
 	usbboot,	3,	1,	do_usbboot,
 	"usbboot - boot from USB device\n",
 	"loadAddr dev:part\n"
 );

 #else
 U_BOOT_CMD(
 	usb,	5,	1,	do_usb,
 	"usb     - USB sub-system\n",
 	"reset - reset (rescan) USB controller\n"
 	"usb  tree  - show USB device tree\n"
 	"usb  info [dev] - show available USB devices\n"
 );
 #endif
 #endif
	/*
	* (C) Copyright 2001
	* Denis Peter, MPL AG Switzerland
	*
	* Most of this source has been derived from the Linux USB
	* project.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*
	*/

	#include <common.h>
	#include <command.h>

	#if (CONFIG_COMMANDS & CFG_CMD_USB)

	#include <usb.h>

	#ifdef CONFIG_USB_STORAGE
	static int usb_stor_curr_dev=-1; /* current device */
	#endif

	/* some display routines (info command) */
	char * usb_get_class_desc(unsigned char dclass)
	{
	switch(dclass) {
	case USB_CLASS_PER_INTERFACE:
	return("See Interface");
	case USB_CLASS_AUDIO:
	return("Audio");
	case USB_CLASS_COMM:
	return("Communication");
	case USB_CLASS_HID:
	return("Human Interface");
	case USB_CLASS_PRINTER:
	return("Printer");
	case USB_CLASS_MASS_STORAGE:
	return("Mass Storage");
	case USB_CLASS_HUB:
	return("Hub");
	case USB_CLASS_DATA:
	return("CDC Data");
	case USB_CLASS_VENDOR_SPEC:
	return("Vendor specific");
	default :
	return("");
	}
	}

	void usb_display_class_sub(unsigned char dclass,unsigned char subclass,unsigned char proto)
	{
	switch(dclass) {
	case USB_CLASS_PER_INTERFACE:
	printf("See Interface");
	break;
	case USB_CLASS_HID:
	printf("Human Interface, Subclass: ");
	switch(subclass) {
	case USB_SUB_HID_NONE:
	printf("None");
	break;
	case USB_SUB_HID_BOOT:
	printf("Boot ");
	switch(proto) {
	case USB_PROT_HID_NONE:
	printf("None");
	break;
	case USB_PROT_HID_KEYBOARD:
	printf("Keyboard");
	break;
	case USB_PROT_HID_MOUSE:
	printf("Mouse");
	break;
	default:
	printf("reserved");
	}
	break;
	default:
	printf("reserved");
	}
	break;
	case USB_CLASS_MASS_STORAGE:
	printf("Mass Storage, ");
	switch(subclass) {
	case US_SC_RBC:
	printf("RBC ");
	break;
	case US_SC_8020:
	printf("SFF-8020i (ATAPI)");
	break;
	case US_SC_QIC:
	printf("QIC-157 (Tape)");
	break;
	case US_SC_UFI:
	printf("UFI");
	break;
	case US_SC_8070:
	printf("SFF-8070");
	break;
	case US_SC_SCSI:
	printf("Transp. SCSI");
	break;
	default:
	printf("reserved");
	break;
	}
	printf(", ");
	switch(proto) {
	case US_PR_CB:
	printf("Command/Bulk");
	break;
	case US_PR_CBI:
	printf("Command/Bulk/Int");
	break;
	case US_PR_BULK:
	printf("Bulk only");
	break;
	default:
	printf("reserved");
	}
	break;
	default:
	printf("%s",usb_get_class_desc(dclass));
	}
	}

	void usb_display_string(struct usb_device *dev,int index)
	{
	char buffer[256];
	if (index!=0) {
	if (usb_string(dev,index,&buffer[0],256)>0);
	printf("String: \"%s\"",buffer);
	}
	}

	void usb_display_desc(struct usb_device *dev)
	{
	if (dev->descriptor.bDescriptorType==USB_DT_DEVICE) {
	printf("%d: %s, USB Revision %x.%x\n",dev->devnum,usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass),
	(dev->descriptor.bcdUSB>>8) & 0xff,dev->descriptor.bcdUSB & 0xff);
	if (strlen(dev->mf) \|\| strlen(dev->prod) \|\| strlen(dev->serial))
	printf(" - %s %s %s\n",dev->mf,dev->prod,dev->serial);
	if (dev->descriptor.bDeviceClass) {
	printf(" - Class: ");
	usb_display_class_sub(dev->descriptor.bDeviceClass,dev->descriptor.bDeviceSubClass,dev->descriptor.bDeviceProtocol);
	printf("\n");
	}
	else {
	printf(" - Class: (from Interface) %s\n",usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass));
	}
	printf(" - PacketSize: %d Configurations: %d\n",dev->descriptor.bMaxPacketSize0,dev->descriptor.bNumConfigurations);
	printf(" - Vendor: 0x%04x Product 0x%04x Version %d.%d\n",dev->descriptor.idVendor,dev->descriptor.idProduct,(dev->descriptor.bcdDevice>>8) & 0xff,dev->descriptor.bcdDevice & 0xff);
	}

	}

	void usb_display_conf_desc(struct usb_config_descriptor config,struct usb_device dev)
	{
	printf(" Configuration: %d\n",config->bConfigurationValue);
	printf(" - Interfaces: %d %s%s%dmA\n",config->bNumInterfaces,(config->bmAttributes & 0x40) ? "Self Powered " : "Bus Powered ",
	(config->bmAttributes & 0x20) ? "Remote Wakeup " : "",config->MaxPower*2);
	if (config->iConfiguration) {
	printf(" - ");
	usb_display_string(dev,config->iConfiguration);
	printf("\n");
	}
	}

	void usb_display_if_desc(struct usb_interface_descriptor ifdesc,struct usb_device dev)
	{
	printf(" Interface: %d\n",ifdesc->bInterfaceNumber);
	printf(" - Alternate Settings %d, Endpoints: %d\n",ifdesc->bAlternateSetting,ifdesc->bNumEndpoints);
	printf(" - Class ");
	usb_display_class_sub(ifdesc->bInterfaceClass,ifdesc->bInterfaceSubClass,ifdesc->bInterfaceProtocol);
	printf("\n");
	if (ifdesc->iInterface) {
	printf(" - ");
	usb_display_string(dev,ifdesc->iInterface);
	printf("\n");
	}
	}

	void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc)
	{
	printf(" - Endpoint %d %s ",epdesc->bEndpointAddress & 0xf,(epdesc->bEndpointAddress & 0x80) ? "In" : "Out");
	switch((epdesc->bmAttributes & 0x03))
	{
	case 0: printf("Control"); break;
	case 1: printf("Isochronous"); break;
	case 2: printf("Bulk"); break;
	case 3: printf("Interrupt"); break;
	}
	printf(" MaxPacket %d",epdesc->wMaxPacketSize);
	if ((epdesc->bmAttributes & 0x03)==0x3)
	printf(" Interval %dms",epdesc->bInterval);
	printf("\n");
	}

	/* main routine to diasplay the configs, interfaces and endpoints */
	void usb_display_config(struct usb_device *dev)
	{
	struct usb_config_descriptor *config;
	struct usb_interface_descriptor *ifdesc;
	struct usb_endpoint_descriptor *epdesc;
	int i,ii;

	config= &dev->config;
	usb_display_conf_desc(config,dev);
	for(i=0;i<config->no_of_if;i++) {
	ifdesc= &config->if_desc[i];
	usb_display_if_desc(ifdesc,dev);
	for(ii=0;ii<ifdesc->no_of_ep;ii++) {
	epdesc= &ifdesc->ep_desc[ii];
	usb_display_ep_desc(epdesc);
	}
	}
	printf("\n");
	}

	/* shows the device tree recursively */
	void usb_show_tree_graph(struct usb_device dev,char pre)
	{
	int i,index;
	int has_child,last_child,port;

	index=strlen(pre);
	printf(" %s",pre);
	/* check if the device has connected children */
	has_child=0;
	for(i=0;i<dev->maxchild;i++) {
	if (dev->children[i]!=NULL)
	has_child=1;
	}
	/* check if we are the last one */
	last_child=1;
	if (dev->parent!=NULL) {
	for(i=0;i<dev->parent->maxchild;i++) {
	/* search for children */
	if (dev->parent->children[i]==dev) {
	/* found our pointer, see if we have a little sister */
	port=i;
	while(i++<dev->parent->maxchild) {
	if (dev->parent->children[i]!=NULL) {
	/* found a sister */
	last_child=0;
	break;
	} /* if */
	} /* while */
	} /* device found */
	} /* for all children of the parent */
	printf("\b+-");
	/* correct last child */
	if (last_child) {
	pre[index-1]=' ';
	}
	} /* if not root hub */
	else
	printf(" ");
	printf("%d ",dev->devnum);
	pre[index++]=' ';
	pre[index++]= has_child ? '\|' : ' ';
	pre[index]=0;
	printf(" %s (%s, %dmA)\n",usb_get_class_desc(dev->config.if_desc[0].bInterfaceClass),
	dev->slow ? "1.5MBit/s" : "12MBit/s",dev->config.MaxPower * 2);
	if (strlen(dev->mf) \|\|
	strlen(dev->prod) \|\|
	strlen(dev->serial))
	printf(" %s %s %s %s\n",pre,dev->mf,dev->prod,dev->serial);
	printf(" %s\n",pre);
	if (dev->maxchild>0) {
	for(i=0;i<dev->maxchild;i++) {
	if (dev->children[i]!=NULL) {
	usb_show_tree_graph(dev->children[i],pre);
	pre[index]=0;
	}
	}
	}
	}

	/* main routine for the tree command */
	void usb_show_tree(struct usb_device *dev)
	{
	char preamble[32];

	memset(preamble,0,32);
	usb_show_tree_graph(dev,&preamble[0]);
	}


	/******************************************************************************
	* usb boot command intepreter. Derived from diskboot
	*/
	#ifdef CONFIG_USB_STORAGE
	int do_usbboot (cmd_tbl_t cmdtp, int flag, int argc, char argv[])
	{
	char *boot_device = NULL;
	char *ep;
	int dev, part=1, rcode;
	ulong addr, cnt, checksum;
	disk_partition_t info;
	image_header_t *hdr;
	block_dev_desc_t *stor_dev;


	switch (argc) {
	case 1:
	addr = CFG_LOAD_ADDR;
	boot_device = getenv ("bootdevice");
	break;
	case 2:
	addr = simple_strtoul(argv[1], NULL, 16);
	boot_device = getenv ("bootdevice");
	break;
	case 3:
	addr = simple_strtoul(argv[1], NULL, 16);
	boot_device = argv[2];
	break;
	default:
	printf ("Usage:\n%s\n", cmdtp->usage);
	return 1;
	}

	if (!boot_device) {
	puts ("\n No boot device \n");
	return 1;
	}

	dev = simple_strtoul(boot_device, &ep, 16);
	stor_dev=usb_stor_get_dev(dev);
	if (stor_dev->type == DEV_TYPE_UNKNOWN) {
	printf ("\n** Device %d not available\n", dev);
	return 1;
	}
	if (stor_dev->block_read==NULL) {
	printf("storage device not initialized. Use usb scan\n");
	return 1;
	}
	if (*ep) {
	if (*ep != ':') {
	puts ("\n Invalid boot device, use `dev[:part]' \n");
	return 1;
	}
	part = simple_strtoul(++ep, NULL, 16);
	}

	if (get_partition_info (stor_dev, part, &info)) {
	/* try to boot raw .... */
	strncpy(&info.type[0], BOOT_PART_TYPE, sizeof(BOOT_PART_TYPE));
	strncpy(&info.name[0], "Raw", 4);
	info.start=0;
	info.blksz=0x200;
	info.size=2880;
	printf("error reading partinfo...try to boot raw\n");
	}
	if ((strncmp(info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) &&
	(strncmp(info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) {
	printf ("\n** Invalid partition type \"%.32s\""
	" (expect \"" BOOT_PART_TYPE "\")\n",
	info.type);
	return 1;
	}
	printf ("\nLoading from USB device %d, partition %d: "
	"Name: %.32s Type: %.32s\n",
	dev, part, info.name, info.type);

	debug ("First Block: %ld, # of blocks: %ld, Block Size: %ld\n",
	info.start, info.size, info.blksz);

	if (stor_dev->block_read(dev, info.start, 1, (ulong *)addr) != 1) {
	printf ("** Read error on %d:%d\n", dev, part);
	return 1;
	}

	hdr = (image_header_t *)addr;

	if (ntohl(hdr->ih_magic) != IH_MAGIC) {
	printf("\n Bad Magic Number \n");
	return 1;
	}

	checksum = ntohl(hdr->ih_hcrc);
	hdr->ih_hcrc = 0;

	if (crc32 (0, (char *)hdr, sizeof(image_header_t)) != checksum) {
	puts ("\n Bad Header Checksum \n");
	return 1;
	}
	hdr->ih_hcrc = htonl(checksum); /* restore checksum for later use */

	print_image_hdr (hdr);

	cnt = (ntohl(hdr->ih_size) + sizeof(image_header_t));
	cnt += info.blksz - 1;
	cnt /= info.blksz;
	cnt -= 1;

	if (stor_dev->block_read (dev, info.start+1, cnt,
	(ulong *)(addr+info.blksz)) != cnt) {
	printf ("\n** Read error on %d:%d\n", dev, part);
	return 1;
	}
	/* Loading ok, update default load address */
	load_addr = addr;

	flush_cache (addr, (cnt+1)*info.blksz);

	/* Check if we should attempt an auto-start */
	if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) {
	char *local_args[2];
	extern int do_bootm (cmd_tbl_t , int, int, char []);
	local_args[0] = argv[0];
	local_args[1] = NULL;
	printf ("Automatic boot of image at addr 0x%08lX ...\n", addr);
	rcode=do_bootm (cmdtp, 0, 1, local_args);
	return rcode;
	}
	return 0;
	}
	#endif /* CONFIG_USB_STORAGE */


	/*********************************************************************************
	* usb command intepreter
	*/
	int do_usb (cmd_tbl_t cmdtp, int flag, int argc, char argv[])
	{

	int i;
	struct usb_device *dev = NULL;
	#ifdef CONFIG_USB_STORAGE
	block_dev_desc_t *stor_dev;
	#endif

	if ((strncmp(argv[1],"reset",5) == 0) \|\|
	(strncmp(argv[1],"start",5) == 0)){
	usb_stop();
	printf("(Re)start USB...\n");
	usb_init();
	return 0;
	}
	if (strncmp(argv[1],"stop",4) == 0) {
	#ifdef CONFIG_USB_KEYBOARD
	if (argc==2) {
	if (usb_kbd_deregister()!=0) {
	printf("USB not stopped: usbkbd still using USB\n");
	return 1;
	}
	}
	else { /* forced stop, switch console in to serial */
	console_assign(stdin,"serial");
	usb_kbd_deregister();
	}
	#endif
	printf("stopping USB..\n");
	usb_stop();
	return 0;
	}
	if (strncmp(argv[1],"tree",4) == 0) {
	printf("\nDevice Tree:\n");
	usb_show_tree(usb_get_dev_index(0));
	return 0;
	}
	if (strncmp(argv[1],"inf",3) == 0) {
	int d;
	if (argc==2) {
	for(d=0;d<USB_MAX_DEVICE;d++) {
	dev=usb_get_dev_index(d);
	if (dev==NULL)
	break;
	usb_display_desc(dev);
	usb_display_config(dev);
	}
	return 0;
	}
	else {
	int d;

	i=simple_strtoul(argv[2], NULL, 16);
	printf("config for device %d\n",i);
	for(d=0;d<USB_MAX_DEVICE;d++) {
	dev=usb_get_dev_index(d);
	if (dev==NULL)
	break;
	if (dev->devnum==i)
	break;
	}
	if (dev==NULL) {
	printf("* NO Device avaiable *\n");
	return 0;
	}
	else {
	usb_display_desc(dev);
	usb_display_config(dev);
	}
	}
	return 0;
	}
	#ifdef CONFIG_USB_STORAGE
	if (strncmp(argv[1],"scan",4) == 0) {
	printf("Scan for storage device:\n");
	usb_stor_curr_dev=usb_stor_scan(1);
	if (usb_stor_curr_dev==-1) {
	printf("No device found. Not initialized?\n");
	return 1;
	}
	return 0;
	}
	if (strncmp(argv[1],"part",4) == 0) {
	int devno, ok;
	for (ok=0, devno=0; devno<USB_MAX_STOR_DEV; ++devno) {
	stor_dev=usb_stor_get_dev(devno);
	if (stor_dev->type!=DEV_TYPE_UNKNOWN) {
	ok++;
	if (devno)
	printf("\n");
	printf("print_part of %x\n",devno);
	print_part(stor_dev);
	}
	}
	if (!ok) {
	printf("\nno USB devices available\n");
	return 1;
	}
	return 0;
	}
	if (strcmp(argv[1],"read") == 0) {
	if (usb_stor_curr_dev<0) {
	printf("no current device selected\n");
	return 1;
	}
	if (argc==5) {
	unsigned long addr = simple_strtoul(argv[2], NULL, 16);
	unsigned long blk = simple_strtoul(argv[3], NULL, 16);
	unsigned long cnt = simple_strtoul(argv[4], NULL, 16);
	unsigned long n;
	printf ("\nUSB read: device %d block # %ld, count %ld ... ",
	usb_stor_curr_dev, blk, cnt);
	stor_dev=usb_stor_get_dev(usb_stor_curr_dev);
	n = stor_dev->block_read(usb_stor_curr_dev, blk, cnt, (ulong *)addr);
	printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR");
	if (n==cnt)
	return 0;
	return 1;
	}
	}
	if (strcmp(argv[1],"dev") == 0) {
	if (argc==3) {
	int dev = (int)simple_strtoul(argv[2], NULL, 10);
	printf ("\nUSB device %d: ", dev);
	if (dev >= USB_MAX_STOR_DEV) {
	printf("unknown device\n");
	return 1;
	}
	printf ("\n Device %d: ", dev);
	stor_dev=usb_stor_get_dev(dev);
	dev_print(stor_dev);
	if (stor_dev->type == DEV_TYPE_UNKNOWN) {
	return 1;
	}
	usb_stor_curr_dev = dev;
	printf("... is now current device\n");
	return 0;
	}
	else {
	printf ("\nUSB device %d: ", usb_stor_curr_dev);
	stor_dev=usb_stor_get_dev(usb_stor_curr_dev);
	dev_print(stor_dev);
	if (stor_dev->type == DEV_TYPE_UNKNOWN) {
	return 1;
	}
	return 0;
	}
	return 0;
	}
	#endif /* CONFIG_USB_STORAGE */
	printf ("Usage:\n%s\n", cmdtp->usage);
	return 1;
	}


	#endif /* (CONFIG_COMMANDS & CFG_CMD_USB) */


	#if (CONFIG_COMMANDS & CFG_CMD_USB)

	#ifdef CONFIG_USB_STORAGE
	U_BOOT_CMD(
	usb, 5, 1, do_usb,
	"usb - USB sub-system\n",
	"reset - reset (rescan) USB controller\n"
	"usb stop [f] - stop USB [f]=force stop\n"
	"usb tree - show USB device tree\n"
	"usb info [dev] - show available USB devices\n"
	"usb scan - (re-)scan USB bus for storage devices\n"
	"usb device [dev] - show or set current USB storage device\n"
	"usb part [dev] - print partition table of one or all USB storage devices\n"
	"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
	" to memory address `addr'\n"
	);


	U_BOOT_CMD(
	usbboot, 3, 1, do_usbboot,
	"usbboot - boot from USB device\n",
	"loadAddr dev:part\n"
	);

	#else
	U_BOOT_CMD(
	usb, 5, 1, do_usb,
	"usb - USB sub-system\n",
	"reset - reset (rescan) USB controller\n"
	"usb tree - show USB device tree\n"
	"usb info [dev] - show available USB devices\n"
	);
	#endif
	#endif