| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2016 Socionext Inc. |
| * Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <fdtdec.h> |
| #include <mmc.h> |
| #include <dm.h> |
| #include <dm/pinctrl.h> |
| #include <linux/compat.h> |
| #include <linux/dma-direction.h> |
| #include <linux/io.h> |
| #include <linux/sizes.h> |
| #include <power/regulator.h> |
| #include <asm/unaligned.h> |
| |
| #include "tmio-common.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static u64 tmio_sd_readq(struct tmio_sd_priv *priv, unsigned int reg) |
| { |
| return readq(priv->regbase + (reg << 1)); |
| } |
| |
| static void tmio_sd_writeq(struct tmio_sd_priv *priv, |
| u64 val, unsigned int reg) |
| { |
| writeq(val, priv->regbase + (reg << 1)); |
| } |
| |
| static u16 tmio_sd_readw(struct tmio_sd_priv *priv, unsigned int reg) |
| { |
| return readw(priv->regbase + (reg >> 1)); |
| } |
| |
| static void tmio_sd_writew(struct tmio_sd_priv *priv, |
| u16 val, unsigned int reg) |
| { |
| writew(val, priv->regbase + (reg >> 1)); |
| } |
| |
| u32 tmio_sd_readl(struct tmio_sd_priv *priv, unsigned int reg) |
| { |
| u32 val; |
| |
| if (priv->caps & TMIO_SD_CAP_64BIT) |
| return readl(priv->regbase + (reg << 1)); |
| else if (priv->caps & TMIO_SD_CAP_16BIT) { |
| val = readw(priv->regbase + (reg >> 1)) & 0xffff; |
| if ((reg == TMIO_SD_RSP10) || (reg == TMIO_SD_RSP32) || |
| (reg == TMIO_SD_RSP54) || (reg == TMIO_SD_RSP76)) { |
| val |= readw(priv->regbase + (reg >> 1) + 2) << 16; |
| } |
| return val; |
| } else |
| return readl(priv->regbase + reg); |
| } |
| |
| void tmio_sd_writel(struct tmio_sd_priv *priv, |
| u32 val, unsigned int reg) |
| { |
| if (priv->caps & TMIO_SD_CAP_64BIT) |
| writel(val, priv->regbase + (reg << 1)); |
| else if (priv->caps & TMIO_SD_CAP_16BIT) { |
| writew(val & 0xffff, priv->regbase + (reg >> 1)); |
| if (reg == TMIO_SD_INFO1 || reg == TMIO_SD_INFO1_MASK || |
| reg == TMIO_SD_INFO2 || reg == TMIO_SD_INFO2_MASK || |
| reg == TMIO_SD_ARG) |
| writew(val >> 16, priv->regbase + (reg >> 1) + 2); |
| } else |
| writel(val, priv->regbase + reg); |
| } |
| |
| static dma_addr_t __dma_map_single(void *ptr, size_t size, |
| enum dma_data_direction dir) |
| { |
| unsigned long addr = (unsigned long)ptr; |
| |
| if (dir == DMA_FROM_DEVICE) |
| invalidate_dcache_range(addr, addr + size); |
| else |
| flush_dcache_range(addr, addr + size); |
| |
| return addr; |
| } |
| |
| static void __dma_unmap_single(dma_addr_t addr, size_t size, |
| enum dma_data_direction dir) |
| { |
| if (dir != DMA_TO_DEVICE) |
| invalidate_dcache_range(addr, addr + size); |
| } |
| |
| static int tmio_sd_check_error(struct udevice *dev) |
| { |
| struct tmio_sd_priv *priv = dev_get_priv(dev); |
| u32 info2 = tmio_sd_readl(priv, TMIO_SD_INFO2); |
| |
| if (info2 & TMIO_SD_INFO2_ERR_RTO) { |
| /* |
| * TIMEOUT must be returned for unsupported command. Do not |
| * display error log since this might be a part of sequence to |
| * distinguish between SD and MMC. |
| */ |
| return -ETIMEDOUT; |
| } |
| |
| if (info2 & TMIO_SD_INFO2_ERR_TO) { |
| dev_err(dev, "timeout error\n"); |
| return -ETIMEDOUT; |
| } |
| |
| if (info2 & (TMIO_SD_INFO2_ERR_END | TMIO_SD_INFO2_ERR_CRC | |
| TMIO_SD_INFO2_ERR_IDX)) { |
| dev_err(dev, "communication out of sync\n"); |
| return -EILSEQ; |
| } |
| |
| if (info2 & (TMIO_SD_INFO2_ERR_ILA | TMIO_SD_INFO2_ERR_ILR | |
| TMIO_SD_INFO2_ERR_ILW)) { |
| dev_err(dev, "illegal access\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int tmio_sd_wait_for_irq(struct udevice *dev, unsigned int reg, |
| u32 flag) |
| { |
| struct tmio_sd_priv *priv = dev_get_priv(dev); |
| long wait = 1000000; |
| int ret; |
| |
| while (!(tmio_sd_readl(priv, reg) & flag)) { |
| if (wait-- < 0) { |
| dev_err(dev, "timeout\n"); |
| return -ETIMEDOUT; |
| } |
| |
| ret = tmio_sd_check_error(dev); |
| if (ret) |
| return ret; |
| |
| udelay(1); |
| } |
| |
| return 0; |
| } |
| |
| #define tmio_pio_read_fifo(__width, __suffix) \ |
| static void tmio_pio_read_fifo_##__width(struct tmio_sd_priv *priv, \ |
| char *pbuf, uint blksz) \ |
| { \ |
| u##__width *buf = (u##__width *)pbuf; \ |
| int i; \ |
| \ |
| if (likely(IS_ALIGNED((uintptr_t)buf, ((__width) / 8)))) { \ |
| for (i = 0; i < blksz / ((__width) / 8); i++) { \ |
| *buf++ = tmio_sd_read##__suffix(priv, \ |
| TMIO_SD_BUF); \ |
| } \ |
| } else { \ |
| for (i = 0; i < blksz / ((__width) / 8); i++) { \ |
| u##__width data; \ |
| data = tmio_sd_read##__suffix(priv, \ |
| TMIO_SD_BUF); \ |
| put_unaligned(data, buf++); \ |
| } \ |
| } \ |
| } |
| |
| tmio_pio_read_fifo(64, q) |
| tmio_pio_read_fifo(32, l) |
| tmio_pio_read_fifo(16, w) |
| |
| static int tmio_sd_pio_read_one_block(struct udevice *dev, char *pbuf, |
| uint blocksize) |
| { |
| struct tmio_sd_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| /* wait until the buffer is filled with data */ |
| ret = tmio_sd_wait_for_irq(dev, TMIO_SD_INFO2, |
| TMIO_SD_INFO2_BRE); |
| if (ret) |
| return ret; |
| |
| /* |
| * Clear the status flag _before_ read the buffer out because |
| * TMIO_SD_INFO2_BRE is edge-triggered, not level-triggered. |
| */ |
| tmio_sd_writel(priv, 0, TMIO_SD_INFO2); |
| |
| if (priv->caps & TMIO_SD_CAP_64BIT) |
| tmio_pio_read_fifo_64(priv, pbuf, blocksize); |
| else if (priv->caps & TMIO_SD_CAP_16BIT) |
| tmio_pio_read_fifo_16(priv, pbuf, blocksize); |
| else |
| tmio_pio_read_fifo_32(priv, pbuf, blocksize); |
| |
| return 0; |
| } |
| |
| #define tmio_pio_write_fifo(__width, __suffix) \ |
| static void tmio_pio_write_fifo_##__width(struct tmio_sd_priv *priv, \ |
| const char *pbuf, uint blksz)\ |
| { \ |
| const u##__width *buf = (const u##__width *)pbuf; \ |
| int i; \ |
| \ |
| if (likely(IS_ALIGNED((uintptr_t)buf, ((__width) / 8)))) { \ |
| for (i = 0; i < blksz / ((__width) / 8); i++) { \ |
| tmio_sd_write##__suffix(priv, *buf++, \ |
| TMIO_SD_BUF); \ |
| } \ |
| } else { \ |
| for (i = 0; i < blksz / ((__width) / 8); i++) { \ |
| u##__width data = get_unaligned(buf++); \ |
| tmio_sd_write##__suffix(priv, data, \ |
| TMIO_SD_BUF); \ |
| } \ |
| } \ |
| } |
| |
| tmio_pio_write_fifo(64, q) |
| tmio_pio_write_fifo(32, l) |
| tmio_pio_write_fifo(16, w) |
| |
| static int tmio_sd_pio_write_one_block(struct udevice *dev, |
| const char *pbuf, uint blocksize) |
| { |
| struct tmio_sd_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| /* wait until the buffer becomes empty */ |
| ret = tmio_sd_wait_for_irq(dev, TMIO_SD_INFO2, |
| TMIO_SD_INFO2_BWE); |
| if (ret) |
| return ret; |
| |
| tmio_sd_writel(priv, 0, TMIO_SD_INFO2); |
| |
| if (priv->caps & TMIO_SD_CAP_64BIT) |
| tmio_pio_write_fifo_64(priv, pbuf, blocksize); |
| else if (priv->caps & TMIO_SD_CAP_16BIT) |
| tmio_pio_write_fifo_16(priv, pbuf, blocksize); |
| else |
| tmio_pio_write_fifo_32(priv, pbuf, blocksize); |
| |
| return 0; |
| } |
| |
| static int tmio_sd_pio_xfer(struct udevice *dev, struct mmc_data *data) |
| { |
| const char *src = data->src; |
| char *dest = data->dest; |
| int i, ret; |
| |
| for (i = 0; i < data->blocks; i++) { |
| if (data->flags & MMC_DATA_READ) |
| ret = tmio_sd_pio_read_one_block(dev, dest, |
| data->blocksize); |
| else |
| ret = tmio_sd_pio_write_one_block(dev, src, |
| data->blocksize); |
| if (ret) |
| return ret; |
| |
| if (data->flags & MMC_DATA_READ) |
| dest += data->blocksize; |
| else |
| src += data->blocksize; |
| } |
| |
| return 0; |
| } |
| |
| static void tmio_sd_dma_start(struct tmio_sd_priv *priv, |
| dma_addr_t dma_addr) |
| { |
| u32 tmp; |
| |
| tmio_sd_writel(priv, 0, TMIO_SD_DMA_INFO1); |
| tmio_sd_writel(priv, 0, TMIO_SD_DMA_INFO2); |
| |
| /* enable DMA */ |
| tmp = tmio_sd_readl(priv, TMIO_SD_EXTMODE); |
| tmp |= TMIO_SD_EXTMODE_DMA_EN; |
| tmio_sd_writel(priv, tmp, TMIO_SD_EXTMODE); |
| |
| tmio_sd_writel(priv, dma_addr & U32_MAX, TMIO_SD_DMA_ADDR_L); |
| |
| /* suppress the warning "right shift count >= width of type" */ |
| dma_addr >>= min_t(int, 32, 8 * sizeof(dma_addr)); |
| |
| tmio_sd_writel(priv, dma_addr & U32_MAX, TMIO_SD_DMA_ADDR_H); |
| |
| tmio_sd_writel(priv, TMIO_SD_DMA_CTL_START, TMIO_SD_DMA_CTL); |
| } |
| |
| static int tmio_sd_dma_wait_for_irq(struct udevice *dev, u32 flag, |
| unsigned int blocks) |
| { |
| struct tmio_sd_priv *priv = dev_get_priv(dev); |
| long wait = 1000000 + 10 * blocks; |
| |
| while (!(tmio_sd_readl(priv, TMIO_SD_DMA_INFO1) & flag)) { |
| if (wait-- < 0) { |
| dev_err(dev, "timeout during DMA\n"); |
| return -ETIMEDOUT; |
| } |
| |
| udelay(10); |
| } |
| |
| if (tmio_sd_readl(priv, TMIO_SD_DMA_INFO2)) { |
| dev_err(dev, "error during DMA\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int tmio_sd_dma_xfer(struct udevice *dev, struct mmc_data *data) |
| { |
| struct tmio_sd_priv *priv = dev_get_priv(dev); |
| size_t len = data->blocks * data->blocksize; |
| void *buf; |
| enum dma_data_direction dir; |
| dma_addr_t dma_addr; |
| u32 poll_flag, tmp; |
| int ret; |
| |
| tmp = tmio_sd_readl(priv, TMIO_SD_DMA_MODE); |
| |
| if (data->flags & MMC_DATA_READ) { |
| buf = data->dest; |
| dir = DMA_FROM_DEVICE; |
| /* |
| * The DMA READ completion flag position differs on Socionext |
| * and Renesas SoCs. It is bit 20 on Socionext SoCs and using |
| * bit 17 is a hardware bug and forbidden. It is bit 17 on |
| * Renesas SoCs and bit 20 does not work on them. |
| */ |
| poll_flag = (priv->caps & TMIO_SD_CAP_RCAR) ? |
| TMIO_SD_DMA_INFO1_END_RD : |
| TMIO_SD_DMA_INFO1_END_RD2; |
| tmp |= TMIO_SD_DMA_MODE_DIR_RD; |
| } else { |
| buf = (void *)data->src; |
| dir = DMA_TO_DEVICE; |
| poll_flag = TMIO_SD_DMA_INFO1_END_WR; |
| tmp &= ~TMIO_SD_DMA_MODE_DIR_RD; |
| } |
| |
| tmio_sd_writel(priv, tmp, TMIO_SD_DMA_MODE); |
| |
| dma_addr = __dma_map_single(buf, len, dir); |
| |
| tmio_sd_dma_start(priv, dma_addr); |
| |
| ret = tmio_sd_dma_wait_for_irq(dev, poll_flag, data->blocks); |
| |
| __dma_unmap_single(dma_addr, len, dir); |
| |
| return ret; |
| } |
| |
| /* check if the address is DMA'able */ |
| static bool tmio_sd_addr_is_dmaable(const char *src) |
| { |
| uintptr_t addr = (uintptr_t)src; |
| |
| if (!IS_ALIGNED(addr, TMIO_SD_DMA_MINALIGN)) |
| return false; |
| |
| #if defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARM64) && \ |
| defined(CONFIG_SPL_BUILD) |
| /* |
| * For UniPhier ARMv7 SoCs, the stack is allocated in the locked ways |
| * of L2, which is unreachable from the DMA engine. |
| */ |
| if (addr < CONFIG_SPL_STACK) |
| return false; |
| #endif |
| |
| return true; |
| } |
| |
| int tmio_sd_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| struct tmio_sd_priv *priv = dev_get_priv(dev); |
| int ret; |
| u32 tmp; |
| |
| if (tmio_sd_readl(priv, TMIO_SD_INFO2) & TMIO_SD_INFO2_CBSY) { |
| dev_err(dev, "command busy\n"); |
| return -EBUSY; |
| } |
| |
| /* clear all status flags */ |
| tmio_sd_writel(priv, 0, TMIO_SD_INFO1); |
| tmio_sd_writel(priv, 0, TMIO_SD_INFO2); |
| |
| /* disable DMA once */ |
| tmp = tmio_sd_readl(priv, TMIO_SD_EXTMODE); |
| tmp &= ~TMIO_SD_EXTMODE_DMA_EN; |
| tmio_sd_writel(priv, tmp, TMIO_SD_EXTMODE); |
| |
| tmio_sd_writel(priv, cmd->cmdarg, TMIO_SD_ARG); |
| |
| tmp = cmd->cmdidx; |
| |
| if (data) { |
| tmio_sd_writel(priv, data->blocksize, TMIO_SD_SIZE); |
| tmio_sd_writel(priv, data->blocks, TMIO_SD_SECCNT); |
| |
| /* Do not send CMD12 automatically */ |
| tmp |= TMIO_SD_CMD_NOSTOP | TMIO_SD_CMD_DATA; |
| |
| if (data->blocks > 1) |
| tmp |= TMIO_SD_CMD_MULTI; |
| |
| if (data->flags & MMC_DATA_READ) |
| tmp |= TMIO_SD_CMD_RD; |
| } |
| |
| /* |
| * Do not use the response type auto-detection on this hardware. |
| * CMD8, for example, has different response types on SD and eMMC, |
| * while this controller always assumes the response type for SD. |
| * Set the response type manually. |
| */ |
| switch (cmd->resp_type) { |
| case MMC_RSP_NONE: |
| tmp |= TMIO_SD_CMD_RSP_NONE; |
| break; |
| case MMC_RSP_R1: |
| tmp |= TMIO_SD_CMD_RSP_R1; |
| break; |
| case MMC_RSP_R1b: |
| tmp |= TMIO_SD_CMD_RSP_R1B; |
| break; |
| case MMC_RSP_R2: |
| tmp |= TMIO_SD_CMD_RSP_R2; |
| break; |
| case MMC_RSP_R3: |
| tmp |= TMIO_SD_CMD_RSP_R3; |
| break; |
| default: |
| dev_err(dev, "unknown response type\n"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, "sending CMD%d (SD_CMD=%08x, SD_ARG=%08x)\n", |
| cmd->cmdidx, tmp, cmd->cmdarg); |
| tmio_sd_writel(priv, tmp, TMIO_SD_CMD); |
| |
| ret = tmio_sd_wait_for_irq(dev, TMIO_SD_INFO1, |
| TMIO_SD_INFO1_RSP); |
| if (ret) |
| return ret; |
| |
| if (cmd->resp_type & MMC_RSP_136) { |
| u32 rsp_127_104 = tmio_sd_readl(priv, TMIO_SD_RSP76); |
| u32 rsp_103_72 = tmio_sd_readl(priv, TMIO_SD_RSP54); |
| u32 rsp_71_40 = tmio_sd_readl(priv, TMIO_SD_RSP32); |
| u32 rsp_39_8 = tmio_sd_readl(priv, TMIO_SD_RSP10); |
| |
| cmd->response[0] = ((rsp_127_104 & 0x00ffffff) << 8) | |
| ((rsp_103_72 & 0xff000000) >> 24); |
| cmd->response[1] = ((rsp_103_72 & 0x00ffffff) << 8) | |
| ((rsp_71_40 & 0xff000000) >> 24); |
| cmd->response[2] = ((rsp_71_40 & 0x00ffffff) << 8) | |
| ((rsp_39_8 & 0xff000000) >> 24); |
| cmd->response[3] = (rsp_39_8 & 0xffffff) << 8; |
| } else { |
| /* bit 39-8 */ |
| cmd->response[0] = tmio_sd_readl(priv, TMIO_SD_RSP10); |
| } |
| |
| if (data) { |
| /* use DMA if the HW supports it and the buffer is aligned */ |
| if (priv->caps & TMIO_SD_CAP_DMA_INTERNAL && |
| tmio_sd_addr_is_dmaable(data->src)) |
| ret = tmio_sd_dma_xfer(dev, data); |
| else |
| ret = tmio_sd_pio_xfer(dev, data); |
| |
| ret = tmio_sd_wait_for_irq(dev, TMIO_SD_INFO1, |
| TMIO_SD_INFO1_CMP); |
| if (ret) |
| return ret; |
| } |
| |
| tmio_sd_wait_for_irq(dev, TMIO_SD_INFO2, TMIO_SD_INFO2_SCLKDIVEN); |
| |
| return ret; |
| } |
| |
| static int tmio_sd_set_bus_width(struct tmio_sd_priv *priv, |
| struct mmc *mmc) |
| { |
| u32 val, tmp; |
| |
| switch (mmc->bus_width) { |
| case 0: |
| case 1: |
| val = TMIO_SD_OPTION_WIDTH_1; |
| break; |
| case 4: |
| val = TMIO_SD_OPTION_WIDTH_4; |
| break; |
| case 8: |
| val = TMIO_SD_OPTION_WIDTH_8; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| tmp = tmio_sd_readl(priv, TMIO_SD_OPTION); |
| tmp &= ~TMIO_SD_OPTION_WIDTH_MASK; |
| tmp |= val; |
| tmio_sd_writel(priv, tmp, TMIO_SD_OPTION); |
| |
| return 0; |
| } |
| |
| static void tmio_sd_set_ddr_mode(struct tmio_sd_priv *priv, |
| struct mmc *mmc) |
| { |
| u32 tmp; |
| |
| tmp = tmio_sd_readl(priv, TMIO_SD_IF_MODE); |
| if (mmc->ddr_mode) |
| tmp |= TMIO_SD_IF_MODE_DDR; |
| else |
| tmp &= ~TMIO_SD_IF_MODE_DDR; |
| tmio_sd_writel(priv, tmp, TMIO_SD_IF_MODE); |
| } |
| |
| static void tmio_sd_set_clk_rate(struct tmio_sd_priv *priv, |
| struct mmc *mmc) |
| { |
| unsigned int divisor; |
| u32 val, tmp; |
| |
| if (!mmc->clock) |
| return; |
| |
| divisor = DIV_ROUND_UP(priv->mclk, mmc->clock); |
| |
| if (divisor <= 1) |
| val = (priv->caps & TMIO_SD_CAP_RCAR) ? |
| TMIO_SD_CLKCTL_RCAR_DIV1 : TMIO_SD_CLKCTL_DIV1; |
| else if (divisor <= 2) |
| val = TMIO_SD_CLKCTL_DIV2; |
| else if (divisor <= 4) |
| val = TMIO_SD_CLKCTL_DIV4; |
| else if (divisor <= 8) |
| val = TMIO_SD_CLKCTL_DIV8; |
| else if (divisor <= 16) |
| val = TMIO_SD_CLKCTL_DIV16; |
| else if (divisor <= 32) |
| val = TMIO_SD_CLKCTL_DIV32; |
| else if (divisor <= 64) |
| val = TMIO_SD_CLKCTL_DIV64; |
| else if (divisor <= 128) |
| val = TMIO_SD_CLKCTL_DIV128; |
| else if (divisor <= 256) |
| val = TMIO_SD_CLKCTL_DIV256; |
| else if (divisor <= 512 || !(priv->caps & TMIO_SD_CAP_DIV1024)) |
| val = TMIO_SD_CLKCTL_DIV512; |
| else |
| val = TMIO_SD_CLKCTL_DIV1024; |
| |
| tmp = tmio_sd_readl(priv, TMIO_SD_CLKCTL); |
| if (tmp & TMIO_SD_CLKCTL_SCLKEN && |
| (tmp & TMIO_SD_CLKCTL_DIV_MASK) == val) |
| return; |
| |
| /* stop the clock before changing its rate to avoid a glitch signal */ |
| tmp &= ~TMIO_SD_CLKCTL_SCLKEN; |
| tmio_sd_writel(priv, tmp, TMIO_SD_CLKCTL); |
| |
| tmp &= ~TMIO_SD_CLKCTL_DIV_MASK; |
| tmp |= val | TMIO_SD_CLKCTL_OFFEN; |
| tmio_sd_writel(priv, tmp, TMIO_SD_CLKCTL); |
| |
| tmp |= TMIO_SD_CLKCTL_SCLKEN; |
| tmio_sd_writel(priv, tmp, TMIO_SD_CLKCTL); |
| |
| udelay(1000); |
| } |
| |
| static void tmio_sd_set_pins(struct udevice *dev) |
| { |
| __maybe_unused struct mmc *mmc = mmc_get_mmc_dev(dev); |
| |
| #ifdef CONFIG_DM_REGULATOR |
| struct tmio_sd_priv *priv = dev_get_priv(dev); |
| |
| if (priv->vqmmc_dev) { |
| if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) |
| regulator_set_value(priv->vqmmc_dev, 1800000); |
| else |
| regulator_set_value(priv->vqmmc_dev, 3300000); |
| regulator_set_enable(priv->vqmmc_dev, true); |
| } |
| #endif |
| |
| #ifdef CONFIG_PINCTRL |
| switch (mmc->selected_mode) { |
| case MMC_LEGACY: |
| case SD_LEGACY: |
| case MMC_HS: |
| case SD_HS: |
| case MMC_HS_52: |
| case MMC_DDR_52: |
| pinctrl_select_state(dev, "default"); |
| break; |
| case UHS_SDR12: |
| case UHS_SDR25: |
| case UHS_SDR50: |
| case UHS_DDR50: |
| case UHS_SDR104: |
| case MMC_HS_200: |
| pinctrl_select_state(dev, "state_uhs"); |
| break; |
| default: |
| break; |
| } |
| #endif |
| } |
| |
| int tmio_sd_set_ios(struct udevice *dev) |
| { |
| struct tmio_sd_priv *priv = dev_get_priv(dev); |
| struct mmc *mmc = mmc_get_mmc_dev(dev); |
| int ret; |
| |
| dev_dbg(dev, "clock %uHz, DDRmode %d, width %u\n", |
| mmc->clock, mmc->ddr_mode, mmc->bus_width); |
| |
| ret = tmio_sd_set_bus_width(priv, mmc); |
| if (ret) |
| return ret; |
| tmio_sd_set_ddr_mode(priv, mmc); |
| tmio_sd_set_clk_rate(priv, mmc); |
| tmio_sd_set_pins(dev); |
| |
| return 0; |
| } |
| |
| int tmio_sd_get_cd(struct udevice *dev) |
| { |
| struct tmio_sd_priv *priv = dev_get_priv(dev); |
| |
| if (priv->caps & TMIO_SD_CAP_NONREMOVABLE) |
| return 1; |
| |
| return !!(tmio_sd_readl(priv, TMIO_SD_INFO1) & |
| TMIO_SD_INFO1_CD); |
| } |
| |
| static void tmio_sd_host_init(struct tmio_sd_priv *priv) |
| { |
| u32 tmp; |
| |
| /* soft reset of the host */ |
| tmp = tmio_sd_readl(priv, TMIO_SD_SOFT_RST); |
| tmp &= ~TMIO_SD_SOFT_RST_RSTX; |
| tmio_sd_writel(priv, tmp, TMIO_SD_SOFT_RST); |
| tmp |= TMIO_SD_SOFT_RST_RSTX; |
| tmio_sd_writel(priv, tmp, TMIO_SD_SOFT_RST); |
| |
| /* FIXME: implement eMMC hw_reset */ |
| |
| tmio_sd_writel(priv, TMIO_SD_STOP_SEC, TMIO_SD_STOP); |
| |
| /* |
| * Connected to 32bit AXI. |
| * This register dropped backward compatibility at version 0x10. |
| * Write an appropriate value depending on the IP version. |
| */ |
| if (priv->version >= 0x10) |
| tmio_sd_writel(priv, 0x101, TMIO_SD_HOST_MODE); |
| else |
| tmio_sd_writel(priv, 0x0, TMIO_SD_HOST_MODE); |
| |
| if (priv->caps & TMIO_SD_CAP_DMA_INTERNAL) { |
| tmp = tmio_sd_readl(priv, TMIO_SD_DMA_MODE); |
| tmp |= TMIO_SD_DMA_MODE_ADDR_INC; |
| tmio_sd_writel(priv, tmp, TMIO_SD_DMA_MODE); |
| } |
| } |
| |
| int tmio_sd_bind(struct udevice *dev) |
| { |
| struct tmio_sd_plat *plat = dev_get_platdata(dev); |
| |
| return mmc_bind(dev, &plat->mmc, &plat->cfg); |
| } |
| |
| int tmio_sd_probe(struct udevice *dev, u32 quirks) |
| { |
| struct tmio_sd_plat *plat = dev_get_platdata(dev); |
| struct tmio_sd_priv *priv = dev_get_priv(dev); |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| fdt_addr_t base; |
| int ret; |
| |
| base = devfdt_get_addr(dev); |
| if (base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| priv->regbase = devm_ioremap(dev, base, SZ_2K); |
| if (!priv->regbase) |
| return -ENOMEM; |
| |
| #ifdef CONFIG_DM_REGULATOR |
| device_get_supply_regulator(dev, "vqmmc-supply", &priv->vqmmc_dev); |
| #endif |
| |
| ret = mmc_of_parse(dev, &plat->cfg); |
| if (ret < 0) { |
| dev_err(dev, "failed to parse host caps\n"); |
| return ret; |
| } |
| |
| plat->cfg.name = dev->name; |
| plat->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; |
| |
| if (quirks) |
| priv->caps = quirks; |
| |
| priv->version = tmio_sd_readl(priv, TMIO_SD_VERSION) & |
| TMIO_SD_VERSION_IP; |
| dev_dbg(dev, "version %x\n", priv->version); |
| if (priv->version >= 0x10) { |
| priv->caps |= TMIO_SD_CAP_DMA_INTERNAL; |
| priv->caps |= TMIO_SD_CAP_DIV1024; |
| } |
| |
| if (fdt_get_property(gd->fdt_blob, dev_of_offset(dev), "non-removable", |
| NULL)) |
| priv->caps |= TMIO_SD_CAP_NONREMOVABLE; |
| |
| tmio_sd_host_init(priv); |
| |
| plat->cfg.voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34; |
| plat->cfg.f_min = priv->mclk / |
| (priv->caps & TMIO_SD_CAP_DIV1024 ? 1024 : 512); |
| plat->cfg.f_max = priv->mclk; |
| plat->cfg.b_max = U32_MAX; /* max value of TMIO_SD_SECCNT */ |
| |
| upriv->mmc = &plat->mmc; |
| |
| return 0; |
| } |