| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 2018 Kontron Electronics GmbH |
| * |
| * Configuration settings for the Kontron i.MX6UL boards/SoMs. |
| */ |
| #ifndef __KONTRON_MX6UL_CONFIG_H |
| #define __KONTRON_MX6UL_CONFIG_H |
| |
| #include <asm/arch/imx-regs.h> |
| #include <linux/sizes.h> |
| |
| #include "mx6_common.h" |
| #ifdef CONFIG_SPL_BUILD |
| #include "imx6_spl.h" |
| #endif |
| |
| /* RAM */ |
| #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM |
| |
| #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
| #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
| |
| #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE |
| |
| /* Board and environment settings */ |
| #define CONFIG_MXC_UART_BASE UART4_BASE |
| #define CONFIG_HOSTNAME "kontron-mx6ul" |
| |
| #ifdef CONFIG_USB_EHCI_HCD |
| #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
| #define CONFIG_MXC_USB_FLAGS 0 |
| #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 |
| #endif |
| |
| /* Boot order for distro boot */ |
| #ifndef CONFIG_SPL_BUILD |
| #define BOOT_TARGET_DEVICES(func) \ |
| func(MMC, mmc, 1) \ |
| func(MMC, mmc, 0) \ |
| func(UBIFS, ubifs, 0) \ |
| func(USB, usb, 0) \ |
| func(PXE, pxe, na) \ |
| func(DHCP, dhcp, na) |
| #include <config_distro_bootcmd.h> |
| #else |
| #define BOOTENV |
| #endif |
| |
| /* MMC Configs */ |
| #ifdef CONFIG_FSL_USDHC |
| #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR |
| #define CONFIG_SYS_FSL_USDHC_NUM 2 |
| #endif |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "kernel_addr_r=0x82000000\0" \ |
| "ramdisk_addr_r=0x88080000\0" \ |
| "pxefile_addr_r=0x80100000\0" \ |
| "scriptaddr=0x80100000\0" \ |
| "bootdelay=3\0" \ |
| "ethact=" CONFIG_ETHPRIME "\0" \ |
| "hostname=" CONFIG_HOSTNAME "\0" \ |
| BOOTENV |
| |
| #endif /* __KONTRON_MX6UL_CONFIG_H */ |