CONFIG_ARM=y | |
CONFIG_SKIP_LOWLEVEL_INIT=y | |
CONFIG_SYS_DCACHE_OFF=y | |
CONFIG_ARCH_CPU_INIT=y | |
CONFIG_SYS_THUMB_BUILD=y | |
CONFIG_ARCH_KIRKWOOD=y | |
CONFIG_SYS_KWD_CONFIG="board/Marvell/sheevaplug/kwbimage.cfg" | |
CONFIG_SYS_TEXT_BASE=0x600000 | |
CONFIG_NR_DRAM_BANKS=2 | |
CONFIG_TARGET_SHEEVAPLUG=y | |
CONFIG_ENV_SIZE=0x20000 | |
CONFIG_ENV_OFFSET=0x80000 | |
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-sheevaplug" | |
CONFIG_IDENT_STRING="\nMarvell-Sheevaplug" | |
CONFIG_SYS_LOAD_ADDR=0x800000 | |
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y | |
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 | |
# CONFIG_SYS_MALLOC_F is not set | |
CONFIG_HAS_BOARD_SIZE_LIMIT=y | |
CONFIG_BOARD_SIZE_LIMIT=524288 | |
CONFIG_BOOTDELAY=3 | |
CONFIG_USE_BOOTCOMMAND=y | |
CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;" | |
CONFIG_USE_PREBOOT=y | |
# CONFIG_DISPLAY_BOARDINFO is not set | |
CONFIG_HUSH_PARSER=y | |
CONFIG_SYS_MAXARGS=32 | |
CONFIG_CMD_BOOTZ=y | |
# CONFIG_CMD_FLASH is not set | |
CONFIG_CMD_MMC=y | |
CONFIG_CMD_NAND=y | |
CONFIG_CMD_SATA=y | |
CONFIG_CMD_USB=y | |
CONFIG_CMD_DHCP=y | |
CONFIG_CMD_MII=y | |
CONFIG_CMD_PING=y | |
CONFIG_CMD_EXT2=y | |
CONFIG_CMD_EXT4=y | |
CONFIG_CMD_FAT=y | |
CONFIG_CMD_FS_GENERIC=y | |
CONFIG_CMD_JFFS2=y | |
CONFIG_CMD_MTDPARTS=y | |
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" | |
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)" | |
CONFIG_CMD_UBI=y | |
CONFIG_ISO_PARTITION=y | |
CONFIG_OF_CONTROL=y | |
CONFIG_ENV_OVERWRITE=y | |
CONFIG_ENV_IS_IN_NAND=y | |
CONFIG_NET_RANDOM_ETHADDR=y | |
CONFIG_NETCONSOLE=y | |
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y | |
CONFIG_DM=y | |
CONFIG_SATA_MV=y | |
CONFIG_SYS_SATA_MAX_DEVICE=2 | |
CONFIG_MVEBU_MMC=y | |
CONFIG_MTD=y | |
CONFIG_MTD_RAW_NAND=y | |
CONFIG_PHY_MARVELL=y | |
CONFIG_DM_ETH=y | |
CONFIG_MVGBE=y | |
CONFIG_MII=y | |
CONFIG_DM_RTC=y | |
CONFIG_RTC_MV=y | |
CONFIG_SYS_NS16550=y | |
CONFIG_USB=y | |
CONFIG_USB_EHCI_HCD=y | |
CONFIG_USB_STORAGE=y | |
CONFIG_LZMA=y | |
CONFIG_BZIP2=y |