| # |
| # Video configuration |
| # |
| |
| menu "Graphics support" |
| |
| config DM_VIDEO |
| bool "Enable driver model support for LCD/video" |
| depends on DM |
| help |
| This enables driver model for LCD and video devices. These support |
| a bitmap display of various sizes and depths which can be drawn on |
| to display a command-line console or splash screen. Enabling this |
| option compiles in the video uclass and routes all LCD/video access |
| through this. |
| |
| config VIDEO_LOGO |
| bool "Show the U-Boot logo on the display" |
| depends on DM_VIDEO |
| default y if !SPLASH_SCREEN |
| select VIDEO_BMP_RLE8 |
| help |
| This enables showing the U-Boot logo on the display when a video |
| device is probed. It appears at the top right. The logo itself is at |
| tools/logos/u-boot_logo.bmp and looks best when the display has a |
| black background. |
| |
| config BACKLIGHT |
| bool "Enable panel backlight uclass support" |
| depends on DM_VIDEO |
| default y |
| help |
| This provides backlight uclass driver that enables basic panel |
| backlight support. |
| |
| config VIDEO_PCI_DEFAULT_FB_SIZE |
| hex "Default framebuffer size to use if no drivers request it" |
| depends on DM_VIDEO |
| default 0x1000000 if X86 && PCI |
| default 0 if !(X86 && PCI) |
| help |
| Generally, video drivers request the amount of memory they need for |
| the frame buffer when they are bound, by setting the size field in |
| struct video_uc_plat. That memory is then reserved for use after |
| relocation. But PCI drivers cannot be bound before relocation unless |
| they are mentioned in the devicetree. |
| |
| With this value set appropriately, it is possible for PCI video |
| devices to have a framebuffer allocated by U-Boot. |
| |
| Note: the framebuffer needs to be large enough to store all pixels at |
| maximum resolution. For example, at 1920 x 1200 with 32 bits per |
| pixel, 2560 * 1600 * 32 / 8 = 0xfa0000 bytes are needed. |
| |
| config VIDEO_COPY |
| bool "Enable copying the frame buffer to a hardware copy" |
| depends on DM_VIDEO |
| help |
| On some machines (e.g. x86), reading from the frame buffer is very |
| slow because it is uncached. To improve performance, this feature |
| allows the frame buffer to be kept in cached memory (allocated by |
| U-Boot) and then copied to the hardware frame-buffer as needed. |
| |
| To use this, your video driver must set @copy_base in |
| struct video_uc_plat. |
| |
| config BACKLIGHT_PWM |
| bool "Generic PWM based Backlight Driver" |
| depends on BACKLIGHT && DM_PWM |
| default y |
| help |
| If you have a LCD backlight adjustable by PWM, say Y to enable |
| this driver. |
| This driver can be use with "simple-panel" and |
| it understands the standard device tree |
| (leds/backlight/pwm-backlight.txt) |
| |
| config BACKLIGHT_GPIO |
| bool "Generic GPIO based Backlight Driver" |
| depends on BACKLIGHT |
| help |
| If you have a LCD backlight adjustable by GPIO, say Y to enable |
| this driver. |
| This driver can be used with "simple-panel" and |
| it understands the standard device tree |
| (leds/backlight/gpio-backlight.txt) |
| |
| config VIDEO_BPP8 |
| bool "Support 8-bit-per-pixel displays" |
| depends on DM_VIDEO |
| default y |
| help |
| Support drawing text and bitmaps onto a 8-bit-per-pixel display. |
| Enabling this will include code to support this display. Without |
| this option, such displays will not be supported and console output |
| will be empty. |
| |
| config VIDEO_BPP16 |
| bool "Support 16-bit-per-pixel displays" |
| depends on DM_VIDEO |
| default y |
| help |
| Support drawing text and bitmaps onto a 16-bit-per-pixel display. |
| Enabling this will include code to support this display. Without |
| this option, such displays will not be supported and console output |
| will be empty. |
| |
| config VIDEO_BPP32 |
| bool "Support 32-bit-per-pixel displays" |
| depends on DM_VIDEO |
| default y |
| help |
| Support drawing text and bitmaps onto a 32-bit-per-pixel display. |
| Enabling this will include code to support this display. Without |
| this option, such displays will not be supported and console output |
| will be empty. |
| |
| config VIDEO_ANSI |
| bool "Support ANSI escape sequences in video console" |
| depends on DM_VIDEO |
| default y |
| help |
| Enable ANSI escape sequence decoding for a more fully functional |
| console. |
| |
| config VIDEO_MIPI_DSI |
| bool "Support MIPI DSI interface" |
| depends on DM_VIDEO |
| help |
| Support MIPI DSI interface for driving a MIPI compatible device. |
| The MIPI Display Serial Interface (MIPI DSI) defines a high-speed |
| serial interface between a host processor and a display module. |
| |
| config CONSOLE_NORMAL |
| bool "Support a simple text console" |
| depends on DM_VIDEO |
| default y if DM_VIDEO |
| help |
| Support drawing text on the frame buffer console so that it can be |
| used as a console. Rotation is not supported by this driver (see |
| CONFIG_CONSOLE_ROTATION for that). A built-in 8x16 font is used |
| for the display. |
| |
| config CONSOLE_ROTATION |
| bool "Support rotated displays" |
| depends on DM_VIDEO |
| help |
| Sometimes, for example if the display is mounted in portrait |
| mode or even if it's mounted landscape but rotated by 180degree, |
| we need to rotate our content of the display relative to the |
| framebuffer, so that user can read the messages which are |
| printed out. Enable this option to include a text driver which can |
| support this. The rotation is set by the 'rot' parameter in |
| struct video_priv: 0=unrotated, 1=90 degrees clockwise, 2=180 |
| degrees, 3=270 degrees. |
| |
| config CONSOLE_TRUETYPE |
| bool "Support a console that uses TrueType fonts" |
| depends on DM_VIDEO |
| help |
| TrueTrype fonts can provide outline-drawing capability rather than |
| needing to provide a bitmap for each font and size that is needed. |
| With this option you can adjust the text size and use a variety of |
| fonts. Note that this is noticeably slower than with normal console. |
| |
| config CONSOLE_TRUETYPE_SIZE |
| int "TrueType font size" |
| depends on CONSOLE_TRUETYPE |
| default 18 |
| help |
| This sets the font size for the console. The size is measured in |
| pixels and is the nominal height of a character. Note that fonts |
| are commonly measured in 'points', being 1/72 inch (about 3.52mm). |
| However that measurement depends on the size of your display and |
| there is no standard display density. At present there is not a |
| method to select the display's physical size, which would allow |
| U-Boot to calculate the correct font size. |
| |
| config CONSOLE_TRUETYPE_MAX_METRICS |
| int "TrueType maximum number of font / size combinations" |
| depends on CONSOLE_TRUETYPE |
| default 10 if EXPO |
| default 1 |
| help |
| This sets the number of font / size combinations which can be used by |
| the console. For simple console use a single font is enough. When |
| boot menus are in use, this may need to be increased. |
| |
| Note that a separate entry is needed for each font size, even if the |
| font itself is the same. This is because the entry caches various |
| font metrics which are expensive to regenerate each time the font |
| size changes. |
| |
| config SYS_WHITE_ON_BLACK |
| bool "Display console as white on a black background" |
| default y if ARCH_AT91 || ARCH_EXYNOS || ARCH_ROCKCHIP || ARCH_TEGRA || X86 || ARCH_SUNXI |
| help |
| Normally the display is black on a white background, Enable this |
| option to invert this, i.e. white on a black background. This can be |
| better in low-light situations or to reduce eye strain in some |
| cases. |
| |
| config NO_FB_CLEAR |
| bool "Skip framebuffer clear" |
| help |
| If firmware (whatever loads u-boot) has already put a splash image |
| on screen, you might want to preserve it until whatever u-boot |
| loads takes over the screen. This, for example, can be used to |
| keep splash image on screen until grub graphical boot menu starts. |
| |
| config PANEL |
| bool "Enable panel uclass support" |
| depends on DM_VIDEO |
| default y |
| help |
| This provides panel uclass driver that enables basic panel support. |
| |
| config SIMPLE_PANEL |
| bool "Enable simple panel support" |
| depends on PANEL && BACKLIGHT && DM_GPIO |
| default y |
| help |
| This turns on a simple panel driver that enables a compatible |
| video panel. |
| |
| config PANEL_HX8238D |
| bool "Enable Himax HX-8238D LCD driver" |
| depends on PANEL |
| help |
| Support for HX-8238D LCD Panel |
| The HX8238-D is a single chip controller and driver LSI that |
| integrates the power circuit. |
| It can drive a maximum 960x240 dot graphics on a-TFT panel |
| displays in 16M colors with dithering. |
| |
| source "drivers/video/fonts/Kconfig" |
| |
| config VIDCONSOLE_AS_LCD |
| bool "Use 'vidconsole' when CONFIG_VIDCONSOLE_AS_NAME string is seen in stdout" |
| depends on DM_VIDEO |
| help |
| This is a work-around for boards which have 'lcd' or 'vga' in their |
| stdout environment variable, but have moved to use driver model for |
| video. In this case the console will no-longer work. While it is |
| possible to update the environment, the breakage may be confusing for |
| users. This option will be removed around the end of 2020. |
| |
| config VIDCONSOLE_AS_NAME |
| string "Use 'vidconsole' when string defined here is seen in stdout" |
| depends on VIDCONSOLE_AS_LCD |
| default "lcd" if LCD || TEGRA_COMMON |
| default "vga" if !LCD |
| help |
| This is a work-around for boards which have 'lcd' or 'vga' in their |
| stdout environment variable, but have moved to use driver model for |
| video. In this case the console will no-longer work. While it is |
| possible to update the environment, the breakage may be confusing for |
| users. This option will be removed around the end of 2020. |
| |
| config VIDEO_COREBOOT |
| bool "Enable coreboot framebuffer driver support" |
| depends on X86 |
| help |
| Turn on this option to enable a framebuffer driver when U-Boot is |
| loaded by coreboot where the graphics device is configured by |
| coreboot already. This can in principle be used with any platform |
| that coreboot supports. |
| |
| config VIDEO_EFI |
| bool "Enable EFI framebuffer driver support" |
| depends on EFI_STUB || EFI_APP |
| help |
| Turn on this option to enable a framebuffeer driver when U-Boot is |
| loaded as a payload (see README.u-boot_on_efi) by an EFI BIOS where |
| the graphics device is configured by the EFI BIOS already. This can |
| in principle be used with any platform that has an EFI BIOS. |
| |
| config VIDEO_VESA |
| bool "Enable VESA video driver support" |
| help |
| Turn on this option to enable a very simple driver which uses vesa |
| to discover the video mode and then provides a frame buffer for use |
| by U-Boot. This can in principle be used with any platform that |
| supports PCI and video cards that support VESA BIOS Extension (VBE). |
| |
| config FRAMEBUFFER_SET_VESA_MODE |
| bool "Set framebuffer graphics resolution" |
| depends on VIDEO_VESA || VIDEO_BROADWELL_IGD |
| help |
| Set VESA/native framebuffer mode (needed for bootsplash and graphical |
| framebuffer console) |
| |
| choice |
| prompt "framebuffer graphics resolution" |
| default FRAMEBUFFER_VESA_MODE_118 |
| depends on FRAMEBUFFER_SET_VESA_MODE |
| help |
| This option sets the resolution used for the U-Boot framebuffer (and |
| bootsplash screen). |
| |
| config FRAMEBUFFER_VESA_MODE_100 |
| bool "640x400 256-color" |
| |
| config FRAMEBUFFER_VESA_MODE_101 |
| bool "640x480 256-color" |
| |
| config FRAMEBUFFER_VESA_MODE_102 |
| bool "800x600 16-color" |
| |
| config FRAMEBUFFER_VESA_MODE_103 |
| bool "800x600 256-color" |
| |
| config FRAMEBUFFER_VESA_MODE_104 |
| bool "1024x768 16-color" |
| |
| config FRAMEBUFFER_VESA_MODE_105 |
| bool "1024x768 256-color" |
| |
| config FRAMEBUFFER_VESA_MODE_106 |
| bool "1280x1024 16-color" |
| |
| config FRAMEBUFFER_VESA_MODE_107 |
| bool "1280x1024 256-color" |
| |
| config FRAMEBUFFER_VESA_MODE_108 |
| bool "80x60 text" |
| |
| config FRAMEBUFFER_VESA_MODE_109 |
| bool "132x25 text" |
| |
| config FRAMEBUFFER_VESA_MODE_10A |
| bool "132x43 text" |
| |
| config FRAMEBUFFER_VESA_MODE_10B |
| bool "132x50 text" |
| |
| config FRAMEBUFFER_VESA_MODE_10C |
| bool "132x60 text" |
| |
| config FRAMEBUFFER_VESA_MODE_10D |
| bool "320x200 32k-color (1:5:5:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_10E |
| bool "320x200 64k-color (5:6:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_10F |
| bool "320x200 16.8M-color (8:8:8)" |
| |
| config FRAMEBUFFER_VESA_MODE_110 |
| bool "640x480 32k-color (1:5:5:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_111 |
| bool "640x480 64k-color (5:6:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_112 |
| bool "640x480 16.8M-color (8:8:8)" |
| |
| config FRAMEBUFFER_VESA_MODE_113 |
| bool "800x600 32k-color (1:5:5:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_114 |
| bool "800x600 64k-color (5:6:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_115 |
| bool "800x600 16.8M-color (8:8:8)" |
| |
| config FRAMEBUFFER_VESA_MODE_116 |
| bool "1024x768 32k-color (1:5:5:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_117 |
| bool "1024x768 64k-color (5:6:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_118 |
| bool "1024x768 16.8M-color (8:8:8)" |
| |
| config FRAMEBUFFER_VESA_MODE_119 |
| bool "1280x1024 32k-color (1:5:5:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_11A |
| bool "1280x1024 64k-color (5:6:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_11B |
| bool "1280x1024 16.8M-color (8:8:8)" |
| |
| config FRAMEBUFFER_VESA_MODE_USER |
| bool "Manually select VESA mode" |
| |
| endchoice |
| |
| # Map the config names to an integer (KB). |
| config FRAMEBUFFER_VESA_MODE |
| prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER |
| hex |
| default 0x100 if FRAMEBUFFER_VESA_MODE_100 |
| default 0x101 if FRAMEBUFFER_VESA_MODE_101 |
| default 0x102 if FRAMEBUFFER_VESA_MODE_102 |
| default 0x103 if FRAMEBUFFER_VESA_MODE_103 |
| default 0x104 if FRAMEBUFFER_VESA_MODE_104 |
| default 0x105 if FRAMEBUFFER_VESA_MODE_105 |
| default 0x106 if FRAMEBUFFER_VESA_MODE_106 |
| default 0x107 if FRAMEBUFFER_VESA_MODE_107 |
| default 0x108 if FRAMEBUFFER_VESA_MODE_108 |
| default 0x109 if FRAMEBUFFER_VESA_MODE_109 |
| default 0x10A if FRAMEBUFFER_VESA_MODE_10A |
| default 0x10B if FRAMEBUFFER_VESA_MODE_10B |
| default 0x10C if FRAMEBUFFER_VESA_MODE_10C |
| default 0x10D if FRAMEBUFFER_VESA_MODE_10D |
| default 0x10E if FRAMEBUFFER_VESA_MODE_10E |
| default 0x10F if FRAMEBUFFER_VESA_MODE_10F |
| default 0x110 if FRAMEBUFFER_VESA_MODE_110 |
| default 0x111 if FRAMEBUFFER_VESA_MODE_111 |
| default 0x112 if FRAMEBUFFER_VESA_MODE_112 |
| default 0x113 if FRAMEBUFFER_VESA_MODE_113 |
| default 0x114 if FRAMEBUFFER_VESA_MODE_114 |
| default 0x115 if FRAMEBUFFER_VESA_MODE_115 |
| default 0x116 if FRAMEBUFFER_VESA_MODE_116 |
| default 0x117 if FRAMEBUFFER_VESA_MODE_117 |
| default 0x118 if FRAMEBUFFER_VESA_MODE_118 |
| default 0x119 if FRAMEBUFFER_VESA_MODE_119 |
| default 0x11A if FRAMEBUFFER_VESA_MODE_11A |
| default 0x11B if FRAMEBUFFER_VESA_MODE_11B |
| default 0x117 if FRAMEBUFFER_VESA_MODE_USER |
| |
| config VIDEO_LCD_ANX9804 |
| bool "ANX9804 bridge chip" |
| ---help--- |
| Support for the ANX9804 bridge chip, which can take pixel data coming |
| from a parallel LCD interface and translate it on the fy into a DP |
| interface for driving eDP TFT displays. It uses I2C for configuration. |
| |
| config ATMEL_LCD |
| bool "Atmel LCD panel support" |
| depends on DM_VIDEO && ARCH_AT91 |
| |
| config ATMEL_LCD_BGR555 |
| bool "Display in BGR555 mode" |
| help |
| Use the BGR555 output mode. Otherwise RGB565 is used. |
| |
| config VIDEO_BCM2835 |
| bool "Display support for BCM2835" |
| help |
| The graphics processor already sets up the display so this driver |
| simply checks the resolution and then sets up the frame buffer with |
| that same resolution (or as near as possible) and 32bpp depth, so |
| that U-Boot can access it with full colour depth. |
| |
| config VIDEO_LCD_ORISETECH_OTM8009A |
| bool "OTM8009A DSI LCD panel support" |
| depends on DM_VIDEO |
| select VIDEO_MIPI_DSI |
| help |
| Say Y here if you want to enable support for Orise Technology |
| otm8009a 480x800 dsi 2dl panel. |
| |
| config VIDEO_LCD_RAYDIUM_RM68200 |
| bool "RM68200 DSI LCD panel support" |
| depends on DM_VIDEO |
| select VIDEO_MIPI_DSI |
| help |
| Say Y here if you want to enable support for Raydium RM68200 |
| 720x1280 DSI video mode panel. |
| |
| config VIDEO_LCD_SSD2828 |
| bool "SSD2828 bridge chip" |
| ---help--- |
| Support for the SSD2828 bridge chip, which can take pixel data coming |
| from a parallel LCD interface and translate it on the fly into MIPI DSI |
| interface for driving a MIPI compatible LCD panel. It uses SPI for |
| configuration. |
| |
| config VIDEO_LCD_SSD2828_TX_CLK |
| int "SSD2828 TX_CLK frequency (in MHz)" |
| depends on VIDEO_LCD_SSD2828 |
| default 0 |
| ---help--- |
| The frequency of the crystal, which is clocking SSD2828. It may be |
| anything in the 8MHz-30MHz range and the exact value should be |
| retrieved from the board schematics. Or in the case of Allwinner |
| hardware, it can be usually found as 'lcd_xtal_freq' variable in |
| FEX files. It can be also set to 0 for selecting PCLK from the |
| parallel LCD interface instead of TX_CLK as the PLL clock source. |
| |
| config VIDEO_LCD_SSD2828_RESET |
| string "RESET pin of SSD2828" |
| depends on VIDEO_LCD_SSD2828 |
| default "" |
| ---help--- |
| The reset pin of SSD2828 chip. This takes a string in the format |
| understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H. |
| |
| config VIDEO_LCD_TDO_TL070WSH30 |
| bool "TDO TL070WSH30 DSI LCD panel support" |
| depends on DM_VIDEO |
| select VIDEO_MIPI_DSI |
| help |
| Say Y here if you want to enable support for TDO TL070WSH30 |
| 1024x600 DSI video mode panel. |
| |
| config VIDEO_LCD_HITACHI_TX18D42VM |
| bool "Hitachi tx18d42vm LVDS LCD panel support" |
| ---help--- |
| Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a |
| lcd controller which needs to be initialized over SPI, once that is |
| done they work like a regular LVDS panel. |
| |
| config VIDEO_LCD_SPI_CS |
| string "SPI CS pin for LCD related config job" |
| depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM |
| default "" |
| ---help--- |
| This is one of the SPI communication pins, involved in setting up a |
| working LCD configuration. The exact role of SPI may differ for |
| different hardware setups. The option takes a string in the format |
| understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H. |
| |
| config VIDEO_LCD_SPI_SCLK |
| string "SPI SCLK pin for LCD related config job" |
| depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM |
| default "" |
| ---help--- |
| This is one of the SPI communication pins, involved in setting up a |
| working LCD configuration. The exact role of SPI may differ for |
| different hardware setups. The option takes a string in the format |
| understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H. |
| |
| config VIDEO_LCD_SPI_MOSI |
| string "SPI MOSI pin for LCD related config job" |
| depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM |
| default "" |
| ---help--- |
| This is one of the SPI communication pins, involved in setting up a |
| working LCD configuration. The exact role of SPI may differ for |
| different hardware setups. The option takes a string in the format |
| understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H. |
| |
| config VIDEO_LCD_SPI_MISO |
| string "SPI MISO pin for LCD related config job (optional)" |
| depends on VIDEO_LCD_SSD2828 |
| default "" |
| ---help--- |
| This is one of the SPI communication pins, involved in setting up a |
| working LCD configuration. The exact role of SPI may differ for |
| different hardware setups. If wired up, this pin may provide additional |
| useful functionality. Such as bi-directional communication with the |
| hardware and LCD panel id retrieval (if the panel can report it). The |
| option takes a string in the format understood by 'sunxi_name_to_gpio' |
| function, e.g. PH1 for pin 1 of port H. |
| |
| source "drivers/video/meson/Kconfig" |
| |
| config VIDEO_MVEBU |
| bool "Armada XP LCD controller" |
| ---help--- |
| Support for the LCD controller integrated in the Marvell |
| Armada XP SoC. |
| |
| config VIDEO_OMAP3 |
| bool "Enable OMAP3+ DSS Support" |
| depends on ARCH_OMAP2PLUS |
| help |
| This enables the Display subsystem (DSS) on OMAP3+ boards. |
| |
| config I2C_EDID |
| bool "Enable EDID library" |
| help |
| This enables library for accessing EDID data from an LCD panel. |
| |
| config DISPLAY |
| bool "Enable Display support" |
| depends on DM |
| select I2C_EDID |
| help |
| This supports drivers that provide a display, such as eDP (Embedded |
| DisplayPort) and HDMI (High Definition Multimedia Interface). |
| The devices provide a simple interface to start up the display, |
| read display information and enable it. |
| |
| config NXP_TDA19988 |
| bool "Enable NXP TDA19988 support" |
| depends on DISPLAY |
| help |
| This enables support for the NXP TDA19988 HDMI encoder. This encoder |
| will convert RGB data streams into HDMI-encoded signals. |
| |
| config ATMEL_HLCD |
| bool "Enable ATMEL video support using HLCDC" |
| depends on DM_VIDEO |
| help |
| HLCDC supports video output to an attached LCD panel. |
| |
| source "drivers/video/exynos/Kconfig" |
| |
| config LOGICORE_DP_TX |
| bool "Enable Logicore DP TX driver" |
| depends on DISPLAY |
| help |
| Enable the driver for the transmitter part of the Xilinx LogiCORE |
| DisplayPort, a IP core for Xilinx FPGAs that implements a DisplayPort |
| video interface as defined by VESA DisplayPort v1.2. |
| |
| Note that this is a pure transmitter device, and has no display |
| capabilities by itself. |
| |
| config VIDEO_BROADWELL_IGD |
| bool "Enable Intel Broadwell integrated graphics device" |
| depends on X86 |
| help |
| This enables support for integrated graphics on Intel broadwell |
| devices. Initialisation is mostly performed by a VGA boot ROM, with |
| some setup handled by U-Boot itself. The graphics adaptor works as |
| a VESA device and supports LCD panels, eDP and LVDS outputs. |
| Configuration of most aspects of device operation is performed using |
| a special tool which configures the VGA ROM, but the graphics |
| resolution can be selected in U-Boot. |
| |
| config VIDEO_IVYBRIDGE_IGD |
| bool "Enable Intel Ivybridge integration graphics support" |
| depends on X86 |
| help |
| This enables support for integrated graphics on Intel ivybridge |
| devices. Initialisation is mostly performed by a VGA boot ROM, with |
| some setup handled by U-Boot itself. The graphics adaptor works as |
| a VESA device and supports LCD panels, eDP and LVDS outputs. |
| Configuration of most aspects of device operation is performed using |
| a special tool which configures the VGA ROM, but the graphics |
| resolution can be selected in U-Boot. |
| |
| source "drivers/video/rockchip/Kconfig" |
| |
| config VIDEO_ARM_MALIDP |
| bool "Enable Arm Mali Display Processor support" |
| depends on DM_VIDEO && OF_CONTROL |
| select VEXPRESS_CLK |
| help |
| This enables support for Arm Ltd Mali Display Processors from |
| the DP500, DP550 and DP650 family. |
| |
| config VIDEO_SANDBOX_SDL |
| bool "Enable sandbox video console using SDL" |
| depends on SANDBOX |
| help |
| When using sandbox you can enable an emulated LCD display which |
| appears as an SDL (Simple DirectMedia Layer) window. This is a |
| console device and can display stdout output. Within U-Boot is is |
| a normal bitmap display and can display images as well as text. |
| |
| source "drivers/video/stm32/Kconfig" |
| |
| config VIDEO_TEGRA20 |
| bool "Enable LCD support on Tegra20" |
| depends on OF_CONTROL |
| help |
| Tegra20 supports video output to an attached LCD panel as well as |
| other options such as HDMI. Only the LCD is supported in U-Boot. |
| This option enables this support which can be used on devices which |
| have an LCD display connected. |
| |
| config VIDEO_TEGRA124 |
| bool "Enable video support on Tegra124" |
| depends on DM_VIDEO |
| help |
| Tegra124 supports many video output options including eDP and |
| HDMI. At present only eDP is supported by U-Boot. This option |
| enables this support which can be used on devices which |
| have an eDP display connected. |
| |
| source "drivers/video/bridge/Kconfig" |
| |
| source "drivers/video/imx/Kconfig" |
| |
| config VIDEO_MXS |
| bool "Enable video support on i.MX28/i.MX6UL/i.MX7 SoCs" |
| depends on DM_VIDEO |
| help |
| Enable framebuffer driver for i.MX28/i.MX6UL/i.MX7 processors |
| |
| config VIDEO_NX |
| bool "Enable video support on Nexell SoC" |
| depends on ARCH_S5P6818 || ARCH_S5P4418 |
| help |
| Nexell SoC supports many video output options including eDP and |
| HDMI. This option enables this support which can be used on devices |
| which have an eDP display connected. |
| |
| config VIDEO_SEPS525 |
| bool "Enable video support for Seps525" |
| depends on DM_VIDEO && DM_GPIO |
| help |
| Enable support for the Syncoam PM-OLED display driver (RGB 160x128). |
| Currently driver is supporting only SPI interface. |
| |
| config VIDEO_ZYNQMP_DPSUB |
| bool "Enable video support for ZynqMP Display Port" |
| depends on DM_VIDEO && ZYNQMP_POWER_DOMAIN |
| help |
| Enable support for Xilinx ZynqMP Display Port. Currently this file |
| is used as placeholder for driver. The main reason is to record |
| compatible string and calling power domain driver. |
| |
| source "drivers/video/nexell/Kconfig" |
| |
| config VIDEO |
| bool "Enable legacy video support" |
| depends on !DM_VIDEO |
| help |
| Define this for video support, without using driver model. Some |
| drivers use this because they are not yet converted to driver |
| model. Video drivers typically provide a colour text console and |
| cursor. |
| |
| config CONSOLE_SCROLL_LINES |
| int "Number of lines to scroll the console by" |
| depends on DM_VIDEO || LCD |
| default 1 |
| help |
| When the console need to be scrolled, this is the number of |
| lines to scroll by. It defaults to 1. Increasing this makes the |
| console jump but can help speed up operation when scrolling |
| is slow. |
| |
| config LCD |
| bool "Enable legacy LCD support" |
| help |
| Define this to enable LCD support (for output to LCD display). |
| You will also need to select an LCD driver using an additional |
| CONFIG option. See the README for details. Drives which have been |
| converted to driver model will instead used CONFIG_DM_VIDEO. |
| |
| config VIDEO_DW_HDMI |
| bool |
| help |
| Enables the common driver code for the Designware HDMI TX |
| block found in SoCs from various vendors. |
| As this does not provide any functionality by itself (but |
| rather requires a SoC-specific glue driver to call it), it |
| can not be enabled from the configuration menu. |
| |
| config VIDEO_DSI_HOST_SANDBOX |
| bool "Enable sandbox for dsi host" |
| depends on SANDBOX |
| select VIDEO_MIPI_DSI |
| help |
| Enable support for sandbox dsi host device used for testing |
| purposes. |
| Display Serial Interface (DSI) defines a serial bus and |
| a communication protocol between the host and the device |
| (panel, bridge). |
| |
| config VIDEO_DW_MIPI_DSI |
| bool |
| select VIDEO_MIPI_DSI |
| help |
| Enables the common driver code for the Synopsis Designware |
| MIPI DSI block found in SoCs from various vendors. |
| As this does not provide any functionality by itself (but |
| rather requires a SoC-specific glue driver to call it), it |
| can not be enabled from the configuration menu. |
| |
| config VIDEO_SIMPLE |
| bool "Simple display driver for preconfigured display" |
| help |
| Enables a simple generic display driver which utilizes the |
| simple-framebuffer devicetree bindings. |
| |
| This driver assumes that the display hardware has been initialized |
| before u-boot starts, and u-boot will simply render to the pre- |
| allocated frame buffer surface. |
| |
| config VIDEO_DT_SIMPLEFB |
| bool "Enable SimpleFB support for passing framebuffer to OS" |
| help |
| Enables the code to pass the framebuffer to the kernel as a |
| simple framebuffer in the device tree. |
| The video output is initialized by U-Boot, and kept by the |
| kernel. |
| |
| config VIDEO_MCDE_SIMPLE |
| bool "Simple driver for ST-Ericsson MCDE with preconfigured display" |
| depends on DM_VIDEO |
| help |
| Enables a simple display driver for ST-Ericsson MCDE |
| (Multichannel Display Engine), which reads the configuration from |
| the MCDE registers. |
| |
| This driver assumes that the display hardware has been initialized |
| before u-boot starts, and u-boot will simply render to the pre- |
| allocated frame buffer surface. |
| |
| config OSD |
| bool "Enable OSD support" |
| depends on DM |
| help |
| This supports drivers that provide a OSD (on-screen display), which |
| is a (usually text-oriented) graphics buffer to show information on |
| a display. |
| |
| config SANDBOX_OSD |
| bool "Enable sandbox OSD" |
| depends on OSD |
| help |
| Enable support for sandbox OSD device used for testing purposes. |
| |
| config IHS_VIDEO_OUT |
| bool "Enable IHS video out driver" |
| depends on OSD |
| help |
| Enable support for the gdsys Integrated Hardware Systems (IHS) video |
| out On-screen Display (OSD) used on gdsys FPGAs to control dynamic |
| textual overlays of the display outputs. |
| |
| config SPLASH_SCREEN |
| bool "Show a splash-screen image" |
| help |
| If this option is set, the environment is checked for a variable |
| "splashimage". If found, the usual display of logo, copyright and |
| system information on the LCD is suppressed and the BMP image at the |
| address specified in "splashimage" is loaded instead. The console is |
| redirected to the "nulldev", too. This allows for a "silent" boot |
| where a splash screen is loaded very quickly after power-on. |
| |
| The splash_screen_prepare() function is a weak function defined in |
| common/splash.c. It is called as part of the splash screen display |
| sequence. It gives the board an opportunity to prepare the splash |
| image data before it is processed and sent to the frame buffer by |
| U-Boot. Define your own version to use this feature. |
| |
| if SPLASH_SCREEN |
| |
| config SPLASHIMAGE_GUARD |
| bool "Support unaligned BMP images" |
| help |
| If this option is set, then U-Boot will prevent the environment |
| variable "splashimage" from being set to a problematic address |
| (see doc/README.displaying-bmps). |
| |
| This option is useful for targets where, due to alignment |
| restrictions, an improperly aligned BMP image will cause a data |
| abort. If you think you will not have problems with unaligned |
| accesses (for example because your toolchain prevents them) |
| there is no need to set this option. |
| |
| config SPLASH_SCREEN_ALIGN |
| bool "Allow positioning the splash image anywhere on the display" |
| help |
| If this option is set the splash image can be freely positioned |
| on the screen. Environment variable "splashpos" specifies the |
| position as "x,y". If a positive number is given it is used as |
| number of pixel from left/top. If a negative number is given it |
| is used as number of pixel from right/bottom. You can also |
| specify 'm' for centering the image. |
| |
| Example: |
| setenv splashpos m,m |
| => image at center of screen |
| |
| setenv splashpos 30,20 |
| => image at x = 30 and y = 20 |
| |
| setenv splashpos -10,m |
| => vertically centered image |
| at x = dspWidth - bmpWidth - 9 |
| |
| config HIDE_LOGO_VERSION |
| bool "Hide the version information on the splash screen" |
| help |
| Normally the U-Boot version string is shown on the display when the |
| splash screen is enabled. This information is not otherwise visible |
| since video starts up after U-Boot has displayed the initial banner. |
| |
| Enable this option to hide this information. |
| |
| config SPLASH_SOURCE |
| bool "Control the source of the splash image" |
| help |
| Use the splash_source.c library. This library provides facilities to |
| declare board specific splash image locations, routines for loading |
| splash image from supported locations, and a way of controlling the |
| selected splash location using the "splashsource" environment |
| variable. |
| |
| This CONFIG works as follows: |
| |
| - If splashsource is set to a supported location name as defined by |
| board code, use that splash location. |
| - If splashsource is undefined, use the first splash location as |
| default. |
| - If splashsource is set to an unsupported value, do not load a splash |
| screen. |
| |
| A splash source location can describe either storage with raw data, a |
| storage formatted with a file system or a FIT image. In case of a |
| filesystem, the splash screen data is loaded as a file. The name of |
| the splash screen file can be controlled with the environment variable |
| "splashfile". |
| |
| To enable loading the splash image from a FIT image, CONFIG_FIT must |
| be enabled. The FIT image has to start at the 'offset' field address |
| in the selected splash location. The name of splash image within the |
| FIT shall be specified by the environment variable "splashfile". |
| |
| In case the environment variable "splashfile" is not defined the |
| default name 'splash.bmp' will be used. |
| |
| endif # SPLASH_SCREEN |
| |
| config VIDEO_BMP_GZIP |
| bool "Gzip compressed BMP image support" |
| depends on CMD_BMP || SPLASH_SCREEN |
| help |
| If this option is set, additionally to standard BMP |
| images, gzipped BMP images can be displayed via the |
| splashscreen support or the bmp command. |
| |
| config VIDEO_LOGO_MAX_SIZE |
| hex "Maximum size of the bitmap logo in bytes" |
| default 0x100000 |
| help |
| Sets the maximum uncompressed size of the logo. This is needed when |
| decompressing a BMP file using the gzip algorithm, since it cannot |
| read the size from the bitmap header. |
| |
| config VIDEO_BMP_RLE8 |
| bool "Run length encoded BMP image (RLE8) support" |
| depends on DM_VIDEO |
| help |
| If this option is set, the 8-bit RLE compressed BMP images |
| is supported. |
| |
| config BMP_16BPP |
| bool "16-bit-per-pixel BMP image support" |
| depends on DM_VIDEO || LCD |
| help |
| Support display of bitmaps file with 16-bit-per-pixel |
| |
| config BMP_24BPP |
| bool "24-bit-per-pixel BMP image support" |
| depends on DM_VIDEO || LCD |
| help |
| Support display of bitmaps file with 24-bit-per-pixel. |
| |
| config BMP_32BPP |
| bool "32-bit-per-pixel BMP image support" |
| depends on DM_VIDEO || LCD |
| help |
| Support display of bitmaps file with 32-bit-per-pixel. |
| |
| endmenu |