| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| /* |
| * Copyright (C) 2019 |
| * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> |
| */ |
| |
| #include <dt-bindings/memory/imxrt-sdram.h> |
| #include "imxrt1050-pinfunc.h" |
| |
| / { |
| aliases { |
| display0 = &lcdif; |
| usbphy0 = &usbphy1; |
| }; |
| |
| chosen { |
| u-boot,dm-spl; |
| tick-timer = &gpt; |
| }; |
| |
| clocks { |
| u-boot,dm-spl; |
| }; |
| |
| soc { |
| u-boot,dm-spl; |
| |
| usbphy1: usbphy@400d9000 { |
| compatible = "fsl,imxrt-usbphy"; |
| reg = <0x400d9000 0x1000>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| usbmisc: usbmisc@402e0800 { |
| #index-cells = <1>; |
| compatible = "fsl,imxrt-usbmisc"; |
| reg = <0x402e0800 0x200>; |
| clocks = <&clks IMXRT1050_CLK_USBOH3>; |
| }; |
| |
| usbotg1: usb@402e0000 { |
| compatible = "fsl,imxrt-usb", "fsl,imx27-usb"; |
| reg = <0x402e0000 0x200>; |
| interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMXRT1050_CLK_USBOH3>; |
| fsl,usbphy = <&usbphy1>; |
| fsl,usbmisc = <&usbmisc 0>; |
| ahb-burst-config = <0x0>; |
| tx-burst-size-dword = <0x10>; |
| rx-burst-size-dword = <0x10>; |
| status = "disabled"; |
| }; |
| |
| lcdif: lcdif@402b8000 { |
| compatible = "fsl,imxrt-lcdif"; |
| reg = <0x402b8000 0x4000>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>, |
| <&clks IMXRT1050_CLK_LCDIF_APB>; |
| clock-names = "pix", "axi"; |
| assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>; |
| assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>; |
| status = "disabled"; |
| }; |
| |
| semc: semc@402f0000 { |
| compatible = "fsl,imxrt-semc"; |
| reg = <0x402f0000 0x4000>; |
| clocks = <&clks IMXRT1050_CLK_SEMC>; |
| pinctrl-0 = <&pinctrl_semc>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| }; |
| }; |
| |
| &semc { |
| u-boot,dm-spl; |
| /* |
| * Memory configuration from sdram datasheet IS42S16160J-6BLI |
| */ |
| fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8 |
| MUX_CSX0_SDRAM_CS1 |
| 0 |
| 0 |
| 0 |
| 0>; |
| fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS |
| BL_8 |
| COL_9BITS |
| CL_3>; |
| fsl,sdram-timing = /bits/ 8 <0x2 |
| 0x2 |
| 0x9 |
| 0x1 |
| 0x5 |
| 0x6 |
| |
| 0x20 |
| 0x09 |
| 0x01 |
| 0x00 |
| |
| 0x04 |
| 0x0A |
| 0x21 |
| 0x50>; |
| |
| bank1: bank@0 { |
| fsl,base-address = <0x80000000>; |
| fsl,memory-size = <MEM_SIZE_32M>; |
| u-boot,dm-spl; |
| }; |
| }; |
| |
| &osc { |
| u-boot,dm-spl; |
| }; |
| |
| &anatop { |
| u-boot,dm-spl; |
| }; |
| |
| &clks { |
| u-boot,dm-spl; |
| }; |
| |
| &gpio1 { |
| compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; |
| u-boot,dm-spl; |
| }; |
| |
| &gpio2 { |
| compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; |
| u-boot,dm-spl; |
| }; |
| |
| &gpio3 { |
| compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; |
| u-boot,dm-spl; |
| }; |
| |
| &gpio4 { |
| compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; |
| u-boot,dm-spl; |
| }; |
| |
| &gpio5 { |
| compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; |
| u-boot,dm-spl; |
| }; |
| |
| &gpt { |
| clocks = <&osc>; |
| compatible = "fsl,imxrt-gpt"; |
| status = "okay"; |
| u-boot,dm-spl; |
| }; |
| |
| &lpuart1 { /* console */ |
| compatible = "fsl,imxrt-lpuart"; |
| clock-names = "per"; |
| u-boot,dm-spl; |
| }; |
| |
| &iomuxc { |
| u-boot,dm-spl; |
| compatible = "fsl,imxrt-iomuxc"; |
| pinctrl-0 = <&pinctrl_lpuart1>; |
| |
| pinctrl_semc: semcgrp { |
| fsl,pins = < |
| MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 |
| 0xf1 /* SEMC_D0 */ |
| MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 |
| 0xf1 /* SEMC_D1 */ |
| MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02 |
| 0xf1 /* SEMC_D2 */ |
| MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03 |
| 0xf1 /* SEMC_D3 */ |
| MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04 |
| 0xf1 /* SEMC_D4 */ |
| MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05 |
| 0xf1 /* SEMC_D5 */ |
| MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06 |
| 0xf1 /* SEMC_D6 */ |
| MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07 |
| 0xf1 /* SEMC_D7 */ |
| MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00 |
| 0xf1 /* SEMC_DM0 */ |
| MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00 |
| 0xf1 /* SEMC_A0 */ |
| MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01 |
| 0xf1 /* SEMC_A1 */ |
| MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02 |
| 0xf1 /* SEMC_A2 */ |
| MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03 |
| 0xf1 /* SEMC_A3 */ |
| MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04 |
| 0xf1 /* SEMC_A4 */ |
| MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05 |
| 0xf1 /* SEMC_A5 */ |
| MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06 |
| 0xf1 /* SEMC_A6 */ |
| MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07 |
| 0xf1 /* SEMC_A7 */ |
| MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08 |
| 0xf1 /* SEMC_A8 */ |
| MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09 |
| 0xf1 /* SEMC_A9 */ |
| MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11 |
| 0xf1 /* SEMC_A11 */ |
| MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12 |
| 0xf1 /* SEMC_A12 */ |
| MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0 |
| 0xf1 /* SEMC_BA0 */ |
| MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1 |
| 0xf1 /* SEMC_BA1 */ |
| MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10 |
| 0xf1 /* SEMC_A10 */ |
| MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS |
| 0xf1 /* SEMC_CAS */ |
| MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS |
| 0xf1 /* SEMC_RAS */ |
| MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK |
| 0xf1 /* SEMC_CLK */ |
| MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE |
| 0xf1 /* SEMC_CKE */ |
| MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE |
| 0xf1 /* SEMC_WE */ |
| MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0 |
| 0xf1 /* SEMC_CS0 */ |
| MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08 |
| 0xf1 /* SEMC_D8 */ |
| MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09 |
| 0xf1 /* SEMC_D9 */ |
| MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10 |
| 0xf1 /* SEMC_D10 */ |
| MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11 |
| 0xf1 /* SEMC_D11 */ |
| MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12 |
| 0xf1 /* SEMC_D12 */ |
| MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13 |
| 0xf1 /* SEMC_D13 */ |
| MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14 |
| 0xf1 /* SEMC_D14 */ |
| MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15 |
| 0xf1 /* SEMC_D15 */ |
| MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01 |
| 0xf1 /* SEMC_DM1 */ |
| MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS |
| (IMX_PAD_SION | 0xf1) /* SEMC_DQS */ |
| >; |
| u-boot,dm-spl; |
| }; |
| |
| pinctrl_lcdif: lcdifgrp { |
| fsl,pins = < |
| MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1 |
| MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069 |
| MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069 |
| >; |
| }; |
| |
| pinctrl_lpuart1: lpuart1grp { |
| u-boot,dm-spl; |
| }; |
| |
| pinctrl_usdhc0: usdhc0grp { |
| u-boot,dm-spl; |
| }; |
| }; |
| |
| &usdhc1 { |
| compatible = "fsl,imxrt-usdhc"; |
| u-boot,dm-spl; |
| }; |
| |
| &lcdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcdif>; |
| display = <&display0>; |
| status = "okay"; |
| |
| display0: display0 { |
| bits-per-pixel = <16>; |
| bus-width = <16>; |
| |
| display-timings { |
| timing0: timing0 { |
| clock-frequency = <9300000>; |
| hactive = <480>; |
| vactive = <272>; |
| hback-porch = <4>; |
| hfront-porch = <8>; |
| vback-porch = <4>; |
| vfront-porch = <8>; |
| hsync-len = <41>; |
| vsync-len = <10>; |
| de-active = <1>; |
| pixelclk-active = <0>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| }; |
| }; |
| }; |
| }; |
| |
| &usbotg1 { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |