| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2010-2015 |
| * NVIDIA Corporation <www.nvidia.com> |
| */ |
| |
| /* Tegra114 Clock control functions */ |
| |
| #include <common.h> |
| #include <init.h> |
| #include <log.h> |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sysctr.h> |
| #include <asm/arch/tegra.h> |
| #include <asm/arch-tegra/clk_rst.h> |
| #include <asm/arch-tegra/timer.h> |
| #include <div64.h> |
| #include <fdtdec.h> |
| #include <linux/delay.h> |
| |
| #include <dt-bindings/clock/tegra114-car.h> |
| |
| /* |
| * Clock types that we can use as a source. The Tegra114 has muxes for the |
| * peripheral clocks, and in most cases there are four options for the clock |
| * source. This gives us a clock 'type' and exploits what commonality exists |
| * in the device. |
| * |
| * Letters are obvious, except for T which means CLK_M, and S which means the |
| * clock derived from 32KHz. Beware that CLK_M (also called OSC in the |
| * datasheet) and PLL_M are different things. The former is the basic |
| * clock supplied to the SOC from an external oscillator. The latter is the |
| * memory clock PLL. |
| * |
| * See definitions in clock_id in the header file. |
| */ |
| enum clock_type_id { |
| CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */ |
| CLOCK_TYPE_MCPA, /* and so on */ |
| CLOCK_TYPE_MCPT, |
| CLOCK_TYPE_PCM, |
| CLOCK_TYPE_PCMT, |
| CLOCK_TYPE_PCMT16, |
| CLOCK_TYPE_PDCT, |
| CLOCK_TYPE_ACPT, |
| CLOCK_TYPE_ASPTE, |
| CLOCK_TYPE_PMDACD2T, |
| CLOCK_TYPE_PCST, |
| |
| CLOCK_TYPE_COUNT, |
| CLOCK_TYPE_NONE = -1, /* invalid clock type */ |
| }; |
| |
| enum { |
| CLOCK_MAX_MUX = 8 /* number of source options for each clock */ |
| }; |
| |
| /* |
| * Clock source mux for each clock type. This just converts our enum into |
| * a list of mux sources for use by the code. |
| * |
| * Note: |
| * The extra column in each clock source array is used to store the mask |
| * bits in its register for the source. |
| */ |
| #define CLK(x) CLOCK_ID_ ## x |
| static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = { |
| { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC), |
| CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| MASK_BITS_31_30}, |
| { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO), |
| CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| MASK_BITS_31_30}, |
| { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), |
| CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| MASK_BITS_31_30}, |
| { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE), |
| CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| MASK_BITS_31_30}, |
| { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC), |
| CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| MASK_BITS_31_30}, |
| { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC), |
| CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| MASK_BITS_31_30}, |
| { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC), |
| CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| MASK_BITS_31_30}, |
| { CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC), |
| CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| MASK_BITS_31_30}, |
| { CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC), |
| CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE), |
| MASK_BITS_31_29}, |
| { CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO), |
| CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE), |
| MASK_BITS_31_29}, |
| { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC), |
| CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE), |
| MASK_BITS_31_28} |
| }; |
| |
| /* |
| * Clock type for each peripheral clock source. We put the name in each |
| * record just so it is easy to match things up |
| */ |
| #define TYPE(name, type) type |
| static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = { |
| /* 0x00 */ |
| TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT), |
| TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT), |
| TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT), |
| TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM), |
| TYPE(PERIPHC_PWM, CLOCK_TYPE_PCST), /* only PWM uses b29:28 */ |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_SBC2, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_SBC3, CLOCK_TYPE_PCMT), |
| |
| /* 0x08 */ |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16), |
| TYPE(PERIPHC_I2C5, CLOCK_TYPE_PCMT16), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_SBC1, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T), |
| TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T), |
| |
| /* 0x10 */ |
| TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA), |
| TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA), |
| |
| /* 0x18 */ |
| TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA), |
| TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA), |
| TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT), /* MIPI base-band HSI */ |
| TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT), |
| |
| /* 0x20 */ |
| TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT), |
| TYPE(PERIPHC_HDMI, CLOCK_TYPE_PMDACD2T), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT), |
| TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16), |
| TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT), |
| |
| /* 0x28 */ |
| TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_SBC4, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16), |
| TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT), |
| |
| /* 0x30 */ |
| TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_I2S0, CLOCK_TYPE_AXPT), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| |
| /* 0x38h */ /* Jumps to reg offset 0x3B0h */ |
| TYPE(PERIPHC_G3D2, CLOCK_TYPE_MCPA), |
| TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PCST), /* s/b PCTS */ |
| TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT), |
| TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT), |
| TYPE(PERIPHC_I2C4, CLOCK_TYPE_PCMT16), |
| TYPE(PERIPHC_SBC5, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_SBC6, CLOCK_TYPE_PCMT), |
| |
| /* 0x40 */ |
| TYPE(PERIPHC_AUDIO, CLOCK_TYPE_ACPT), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_DAM0, CLOCK_TYPE_ACPT), |
| TYPE(PERIPHC_DAM1, CLOCK_TYPE_ACPT), |
| TYPE(PERIPHC_DAM2, CLOCK_TYPE_ACPT), |
| TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PCST), /* MASK 31:30 */ |
| TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE), |
| |
| /* 0x48 */ |
| TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE), |
| TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE), |
| TYPE(PERIPHC_NANDSPEED, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PCST), /* MASK 31:30 */ |
| TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_SPEEDO, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| |
| /* 0x50 */ |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE), |
| TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), /* offset 0x420h */ |
| TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT), |
| TYPE(PERIPHC_HDA, CLOCK_TYPE_PCMT), |
| }; |
| |
| /* |
| * This array translates a periph_id to a periphc_internal_id |
| * |
| * Not present/matched up: |
| * uint vi_sensor; _VI_SENSOR_0, 0x1A8 |
| * SPDIF - which is both 0x08 and 0x0c |
| * |
| */ |
| #define NONE(name) (-1) |
| #define OFFSET(name, value) PERIPHC_ ## name |
| static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = { |
| /* Low word: 31:0 */ |
| NONE(CPU), |
| NONE(COP), |
| NONE(TRIGSYS), |
| NONE(RESERVED3), |
| NONE(RTC), |
| NONE(TMR), |
| PERIPHC_UART1, |
| PERIPHC_UART2, /* and vfir 0x68 */ |
| |
| /* 8 */ |
| NONE(GPIO), |
| PERIPHC_SDMMC2, |
| NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */ |
| PERIPHC_I2S1, |
| PERIPHC_I2C1, |
| PERIPHC_NDFLASH, |
| PERIPHC_SDMMC1, |
| PERIPHC_SDMMC4, |
| |
| /* 16 */ |
| NONE(RESERVED16), |
| PERIPHC_PWM, |
| PERIPHC_I2S2, |
| PERIPHC_EPP, |
| PERIPHC_VI, |
| PERIPHC_G2D, |
| NONE(USBD), |
| NONE(ISP), |
| |
| /* 24 */ |
| PERIPHC_G3D, |
| NONE(RESERVED25), |
| PERIPHC_DISP2, |
| PERIPHC_DISP1, |
| PERIPHC_HOST1X, |
| NONE(VCP), |
| PERIPHC_I2S0, |
| NONE(CACHE2), |
| |
| /* Middle word: 63:32 */ |
| NONE(MEM), |
| NONE(AHBDMA), |
| NONE(APBDMA), |
| NONE(RESERVED35), |
| NONE(RESERVED36), |
| NONE(STAT_MON), |
| NONE(RESERVED38), |
| NONE(RESERVED39), |
| |
| /* 40 */ |
| NONE(KFUSE), |
| NONE(SBC1), /* SBC1, 0x34, is this SPI1? */ |
| PERIPHC_NOR, |
| NONE(RESERVED43), |
| PERIPHC_SBC2, |
| NONE(RESERVED45), |
| PERIPHC_SBC3, |
| PERIPHC_I2C5, |
| |
| /* 48 */ |
| NONE(DSI), |
| PERIPHC_TVO, /* also CVE 0x40 */ |
| PERIPHC_MIPI, |
| PERIPHC_HDMI, |
| NONE(CSI), |
| PERIPHC_TVDAC, |
| PERIPHC_I2C2, |
| PERIPHC_UART3, |
| |
| /* 56 */ |
| NONE(RESERVED56), |
| PERIPHC_EMC, |
| NONE(USB2), |
| NONE(USB3), |
| PERIPHC_MPE, |
| PERIPHC_VDE, |
| NONE(BSEA), |
| NONE(BSEV), |
| |
| /* Upper word 95:64 */ |
| PERIPHC_SPEEDO, |
| PERIPHC_UART4, |
| PERIPHC_UART5, |
| PERIPHC_I2C3, |
| PERIPHC_SBC4, |
| PERIPHC_SDMMC3, |
| NONE(PCIE), |
| PERIPHC_OWR, |
| |
| /* 72 */ |
| NONE(AFI), |
| PERIPHC_CSITE, |
| NONE(PCIEXCLK), |
| NONE(AVPUCQ), |
| NONE(RESERVED76), |
| NONE(RESERVED77), |
| NONE(RESERVED78), |
| NONE(DTV), |
| |
| /* 80 */ |
| PERIPHC_NANDSPEED, |
| PERIPHC_I2CSLOW, |
| NONE(DSIB), |
| NONE(RESERVED83), |
| NONE(IRAMA), |
| NONE(IRAMB), |
| NONE(IRAMC), |
| NONE(IRAMD), |
| |
| /* 88 */ |
| NONE(CRAM2), |
| NONE(RESERVED89), |
| NONE(MDOUBLER), |
| NONE(RESERVED91), |
| NONE(SUSOUT), |
| NONE(RESERVED93), |
| NONE(RESERVED94), |
| NONE(RESERVED95), |
| |
| /* V word: 31:0 */ |
| NONE(CPUG), |
| NONE(CPULP), |
| PERIPHC_G3D2, |
| PERIPHC_MSELECT, |
| PERIPHC_TSENSOR, |
| PERIPHC_I2S3, |
| PERIPHC_I2S4, |
| PERIPHC_I2C4, |
| |
| /* 08 */ |
| PERIPHC_SBC5, |
| PERIPHC_SBC6, |
| PERIPHC_AUDIO, |
| NONE(APBIF), |
| PERIPHC_DAM0, |
| PERIPHC_DAM1, |
| PERIPHC_DAM2, |
| PERIPHC_HDA2CODEC2X, |
| |
| /* 16 */ |
| NONE(ATOMICS), |
| NONE(RESERVED17), |
| NONE(RESERVED18), |
| NONE(RESERVED19), |
| NONE(RESERVED20), |
| NONE(RESERVED21), |
| NONE(RESERVED22), |
| PERIPHC_ACTMON, |
| |
| /* 24 */ |
| NONE(RESERVED24), |
| NONE(RESERVED25), |
| NONE(RESERVED26), |
| NONE(RESERVED27), |
| PERIPHC_SATA, |
| PERIPHC_HDA, |
| NONE(RESERVED30), |
| NONE(RESERVED31), |
| |
| /* W word: 31:0 */ |
| NONE(HDA2HDMICODEC), |
| NONE(RESERVED1_SATACOLD), |
| NONE(RESERVED2_PCIERX0), |
| NONE(RESERVED3_PCIERX1), |
| NONE(RESERVED4_PCIERX2), |
| NONE(RESERVED5_PCIERX3), |
| NONE(RESERVED6_PCIERX4), |
| NONE(RESERVED7_PCIERX5), |
| |
| /* 40 */ |
| NONE(CEC), |
| NONE(PCIE2_IOBIST), |
| NONE(EMC_IOBIST), |
| NONE(HDMI_IOBIST), |
| NONE(SATA_IOBIST), |
| NONE(MIPI_IOBIST), |
| NONE(EMC1_IOBIST), |
| NONE(XUSB), |
| |
| /* 48 */ |
| NONE(CILAB), |
| NONE(CILCD), |
| NONE(CILE), |
| NONE(DSIA_LP), |
| NONE(DSIB_LP), |
| NONE(RESERVED21_ENTROPY), |
| NONE(RESERVED22_W), |
| NONE(RESERVED23_W), |
| |
| /* 56 */ |
| NONE(RESERVED24_W), |
| NONE(AMX0), |
| NONE(ADX0), |
| NONE(DVFS), |
| NONE(XUSB_SS), |
| NONE(EMC_DLL), |
| NONE(MC1), |
| NONE(EMC1), |
| }; |
| |
| /* |
| * PLL divider shift/mask tables for all PLL IDs. |
| */ |
| struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = { |
| /* |
| * T114: some deviations from T2x/T30. |
| * NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLX, etc.) |
| * If lock_ena or lock_det are >31, they're not used in that PLL. |
| */ |
| |
| { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x0F, |
| .lock_ena = 24, .lock_det = 27, .kcp_shift = 28, .kcp_mask = 3, .kvco_shift = 27, .kvco_mask = 1 }, /* PLLC */ |
| { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 0, .p_mask = 0, |
| .lock_ena = 0, .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLM */ |
| { .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07, |
| .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLP */ |
| { .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07, |
| .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLA */ |
| { .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x01, |
| .lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLU */ |
| { .m_shift = 0, .m_mask = 0x1F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07, |
| .lock_ena = 22, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLD */ |
| { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x0F, |
| .lock_ena = 18, .lock_det = 27, .kcp_shift = 0, .kcp_mask = 0, .kvco_shift = 0, .kvco_mask = 0 }, /* PLLX */ |
| { .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 0, .p_mask = 0, |
| .lock_ena = 9, .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLE */ |
| { .m_shift = 0, .m_mask = 0x0F, .n_shift = 8, .n_mask = 0x3FF, .p_shift = 20, .p_mask = 0x07, |
| .lock_ena = 18, .lock_det = 27, .kcp_shift = 8, .kcp_mask = 0xF, .kvco_shift = 4, .kvco_mask = 0xF }, /* PLLS (RESERVED) */ |
| }; |
| |
| /* |
| * Get the oscillator frequency, from the corresponding hardware configuration |
| * field. Note that T30+ supports 3 new higher freqs. |
| */ |
| enum clock_osc_freq clock_get_osc_freq(void) |
| { |
| struct clk_rst_ctlr *clkrst = |
| (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; |
| u32 reg; |
| |
| reg = readl(&clkrst->crc_osc_ctrl); |
| return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT; |
| } |
| |
| /* Returns a pointer to the clock source register for a peripheral */ |
| u32 *get_periph_source_reg(enum periph_id periph_id) |
| { |
| struct clk_rst_ctlr *clkrst = |
| (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; |
| enum periphc_internal_id internal_id; |
| |
| /* Coresight is a special case */ |
| if (periph_id == PERIPH_ID_CSI) |
| return &clkrst->crc_clk_src[PERIPH_ID_CSI+1]; |
| |
| assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT); |
| internal_id = periph_id_to_internal_id[periph_id]; |
| assert(internal_id != -1); |
| if (internal_id >= PERIPHC_VW_FIRST) { |
| internal_id -= PERIPHC_VW_FIRST; |
| return &clkrst->crc_clk_src_vw[internal_id]; |
| } else |
| return &clkrst->crc_clk_src[internal_id]; |
| } |
| |
| int get_periph_clock_info(enum periph_id periph_id, int *mux_bits, |
| int *divider_bits, int *type) |
| { |
| enum periphc_internal_id internal_id; |
| |
| if (!clock_periph_id_isvalid(periph_id)) |
| return -1; |
| |
| internal_id = periph_id_to_internal_id[periph_id]; |
| if (!periphc_internal_id_isvalid(internal_id)) |
| return -1; |
| |
| *type = clock_periph_type[internal_id]; |
| if (!clock_type_id_isvalid(*type)) |
| return -1; |
| |
| *mux_bits = clock_source[*type][CLOCK_MAX_MUX]; |
| |
| if (*type == CLOCK_TYPE_PCMT16) |
| *divider_bits = 16; |
| else |
| *divider_bits = 8; |
| |
| return 0; |
| } |
| |
| enum clock_id get_periph_clock_id(enum periph_id periph_id, int source) |
| { |
| enum periphc_internal_id internal_id; |
| int type; |
| |
| if (!clock_periph_id_isvalid(periph_id)) |
| return CLOCK_ID_NONE; |
| |
| internal_id = periph_id_to_internal_id[periph_id]; |
| if (!periphc_internal_id_isvalid(internal_id)) |
| return CLOCK_ID_NONE; |
| |
| type = clock_periph_type[internal_id]; |
| if (!clock_type_id_isvalid(type)) |
| return CLOCK_ID_NONE; |
| |
| return clock_source[type][source]; |
| } |
| |
| /** |
| * Given a peripheral ID and the required source clock, this returns which |
| * value should be programmed into the source mux for that peripheral. |
| * |
| * There is special code here to handle the one source type with 5 sources. |
| * |
| * @param periph_id peripheral to start |
| * @param source PLL id of required parent clock |
| * @param mux_bits Set to number of bits in mux register: 2 or 4 |
| * @param divider_bits Set to number of divider bits (8 or 16) |
| * Return: mux value (0-4, or -1 if not found) |
| */ |
| int get_periph_clock_source(enum periph_id periph_id, |
| enum clock_id parent, int *mux_bits, int *divider_bits) |
| { |
| enum clock_type_id type; |
| int mux, err; |
| |
| err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type); |
| assert(!err); |
| |
| for (mux = 0; mux < CLOCK_MAX_MUX; mux++) |
| if (clock_source[type][mux] == parent) |
| return mux; |
| |
| /* if we get here, either us or the caller has made a mistake */ |
| printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id, |
| parent); |
| return -1; |
| } |
| |
| void clock_set_enable(enum periph_id periph_id, int enable) |
| { |
| struct clk_rst_ctlr *clkrst = |
| (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; |
| u32 *clk; |
| u32 reg; |
| |
| /* Enable/disable the clock to this peripheral */ |
| assert(clock_periph_id_isvalid(periph_id)); |
| if ((int)periph_id < (int)PERIPH_ID_VW_FIRST) |
| clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)]; |
| else |
| clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)]; |
| reg = readl(clk); |
| if (enable) |
| reg |= PERIPH_MASK(periph_id); |
| else |
| reg &= ~PERIPH_MASK(periph_id); |
| writel(reg, clk); |
| } |
| |
| void reset_set_enable(enum periph_id periph_id, int enable) |
| { |
| struct clk_rst_ctlr *clkrst = |
| (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; |
| u32 *reset; |
| u32 reg; |
| |
| /* Enable/disable reset to the peripheral */ |
| assert(clock_periph_id_isvalid(periph_id)); |
| if (periph_id < PERIPH_ID_VW_FIRST) |
| reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)]; |
| else |
| reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)]; |
| reg = readl(reset); |
| if (enable) |
| reg |= PERIPH_MASK(periph_id); |
| else |
| reg &= ~PERIPH_MASK(periph_id); |
| writel(reg, reset); |
| } |
| |
| #if CONFIG_IS_ENABLED(OF_CONTROL) |
| /* |
| * Convert a device tree clock ID to our peripheral ID. They are mostly |
| * the same but we are very cautious so we check that a valid clock ID is |
| * provided. |
| * |
| * @param clk_id Clock ID according to tegra114 device tree binding |
| * Return: peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid |
| */ |
| enum periph_id clk_id_to_periph_id(int clk_id) |
| { |
| if (clk_id > PERIPH_ID_COUNT) |
| return PERIPH_ID_NONE; |
| |
| switch (clk_id) { |
| case PERIPH_ID_RESERVED3: |
| case PERIPH_ID_RESERVED16: |
| case PERIPH_ID_RESERVED24: |
| case PERIPH_ID_RESERVED35: |
| case PERIPH_ID_RESERVED43: |
| case PERIPH_ID_RESERVED45: |
| case PERIPH_ID_RESERVED56: |
| case PERIPH_ID_RESERVED76: |
| case PERIPH_ID_RESERVED77: |
| case PERIPH_ID_RESERVED78: |
| case PERIPH_ID_RESERVED83: |
| case PERIPH_ID_RESERVED89: |
| case PERIPH_ID_RESERVED91: |
| case PERIPH_ID_RESERVED93: |
| case PERIPH_ID_RESERVED94: |
| case PERIPH_ID_RESERVED95: |
| return PERIPH_ID_NONE; |
| default: |
| return clk_id; |
| } |
| } |
| |
| /* |
| * Convert a device tree clock ID to our PLL ID. |
| * |
| * @param clk_id Clock ID according to tegra114 device tree binding |
| * Return: clock ID, or CLOCK_ID_NONE if the clock ID is invalid |
| */ |
| enum clock_id clk_id_to_pll_id(int clk_id) |
| { |
| switch (clk_id) { |
| case TEGRA114_CLK_PLL_C: |
| return CLOCK_ID_CGENERAL; |
| case TEGRA114_CLK_PLL_M: |
| return CLOCK_ID_MEMORY; |
| case TEGRA114_CLK_PLL_P: |
| return CLOCK_ID_PERIPH; |
| case TEGRA114_CLK_PLL_A: |
| return CLOCK_ID_AUDIO; |
| case TEGRA114_CLK_PLL_U: |
| return CLOCK_ID_USB; |
| case TEGRA114_CLK_PLL_D: |
| case TEGRA114_CLK_PLL_D_OUT0: |
| return CLOCK_ID_DISPLAY; |
| case TEGRA114_CLK_PLL_X: |
| return CLOCK_ID_XCPU; |
| case TEGRA114_CLK_PLL_E_OUT0: |
| return CLOCK_ID_EPCI; |
| case TEGRA114_CLK_CLK_32K: |
| return CLOCK_ID_32KHZ; |
| case TEGRA114_CLK_CLK_M: |
| return CLOCK_ID_CLK_M; |
| default: |
| return CLOCK_ID_NONE; |
| } |
| } |
| #endif /* CONFIG_IS_ENABLED(OF_CONTROL) */ |
| |
| void clock_early_init(void) |
| { |
| struct clk_rst_ctlr *clkrst = |
| (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; |
| struct clk_pll_info *pllinfo; |
| u32 data; |
| |
| tegra30_set_up_pllp(); |
| |
| /* clear IDDQ before accessing any other PLLC registers */ |
| pllinfo = &tegra_pll_info_table[CLOCK_ID_CGENERAL]; |
| clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, PLLC_IDDQ); |
| udelay(2); |
| |
| /* |
| * PLLC output frequency set to 600Mhz |
| * PLLD output frequency set to 925Mhz |
| */ |
| switch (clock_get_osc_freq()) { |
| case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ |
| case CLOCK_OSC_FREQ_48_0: /* OSC is 48Mhz */ |
| clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8); |
| clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12); |
| break; |
| |
| case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */ |
| clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8); |
| clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12); |
| break; |
| |
| case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */ |
| case CLOCK_OSC_FREQ_16_8: /* OSC is 16.8Mhz */ |
| clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8); |
| clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12); |
| break; |
| case CLOCK_OSC_FREQ_19_2: |
| case CLOCK_OSC_FREQ_38_4: |
| default: |
| /* |
| * These are not supported. It is too early to print a |
| * message and the UART likely won't work anyway due to the |
| * oscillator being wrong. |
| */ |
| break; |
| } |
| |
| /* PLLC_MISC2: Set dynramp_stepA/B. MISC2 maps to pll_out[1] */ |
| writel(0x00561600, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1]); |
| |
| /* PLLC_MISC: Set LOCK_ENABLE */ |
| pllinfo = &tegra_pll_info_table[CLOCK_ID_CGENERAL]; |
| setbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc, (1 << pllinfo->lock_ena)); |
| udelay(2); |
| |
| /* PLLD_MISC: Set CLKENABLE, CPCON 12, LFCON 1, and enable lock */ |
| pllinfo = &tegra_pll_info_table[CLOCK_ID_DISPLAY]; |
| data = (12 << pllinfo->kcp_shift) | (1 << pllinfo->kvco_shift); |
| data |= (1 << PLLD_CLKENABLE) | (1 << pllinfo->lock_ena); |
| writel(data, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc); |
| udelay(2); |
| } |
| |
| void arch_timer_init(void) |
| { |
| struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE; |
| u32 freq, val; |
| |
| freq = clock_get_rate(CLOCK_ID_CLK_M); |
| debug("%s: clk_m freq is %dHz [0x%08X]\n", __func__, freq, freq); |
| |
| /* ARM CNTFRQ */ |
| asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq)); |
| |
| /* Only T114 has the System Counter regs */ |
| debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq); |
| writel(freq, &sysctr->cntfid0); |
| |
| val = readl(&sysctr->cntcr); |
| val |= TSC_CNTCR_ENABLE | TSC_CNTCR_HDBG; |
| writel(val, &sysctr->cntcr); |
| debug("%s: TSC CNTCR = 0x%08X\n", __func__, val); |
| } |
| |
| struct periph_clk_init periph_clk_init_table[] = { |
| { PERIPH_ID_SBC1, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_SBC2, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_SBC3, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_SBC4, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_SBC5, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_SBC6, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_HOST1X, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_DISP1, CLOCK_ID_CGENERAL }, |
| { PERIPH_ID_NDFLASH, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_PWM, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_I2C1, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_I2C2, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_I2C3, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_I2C4, CLOCK_ID_PERIPH }, |
| { PERIPH_ID_I2C5, CLOCK_ID_PERIPH }, |
| { -1, }, |
| }; |