| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2015 Google, Inc |
| * Written by Simon Glass <sjg@chromium.org> |
| * |
| * Based on Rockchip's drivers/power/pmic/pmic_rk808.c: |
| * Copyright (C) 2012 rockchips |
| * zyw <zyw@rock-chips.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <linux/delay.h> |
| #include <power/rk8xx_pmic.h> |
| #include <power/pmic.h> |
| #include <power/regulator.h> |
| |
| #ifndef CONFIG_SPL_BUILD |
| #define ENABLE_DRIVER |
| #endif |
| |
| /* Not used or exisit register and configure */ |
| #define NA 0xff |
| |
| /* Field Definitions */ |
| #define RK808_BUCK_VSEL_MASK 0x3f |
| #define RK808_BUCK4_VSEL_MASK 0xf |
| #define RK808_LDO_VSEL_MASK 0x1f |
| |
| /* RK809 BUCK5 */ |
| #define RK809_BUCK5_CONFIG(n) (0xde + (n) * 1) |
| #define RK809_BUCK5_VSEL_MASK 0x07 |
| |
| /* RK817 BUCK */ |
| #define RK817_BUCK_ON_VSEL(n) (0xbb + 3 * ((n) - 1)) |
| #define RK817_BUCK_SLP_VSEL(n) (0xbc + 3 * ((n) - 1)) |
| #define RK817_BUCK_VSEL_MASK 0x7f |
| #define RK817_BUCK_CONFIG(i) (0xba + (i) * 3) |
| |
| /* RK817 LDO */ |
| #define RK817_LDO_ON_VSEL(n) (0xcc + 2 * ((n) - 1)) |
| #define RK817_LDO_SLP_VSEL(n) (0xcd + 2 * ((n) - 1)) |
| #define RK817_LDO_VSEL_MASK 0x7f |
| |
| /* RK817 ENABLE */ |
| #define RK817_POWER_EN(n) (0xb1 + (n)) |
| #define RK817_POWER_SLP_EN(n) (0xb5 + (n)) |
| |
| #define RK818_BUCK_VSEL_MASK 0x3f |
| #define RK818_BUCK4_VSEL_MASK 0x1f |
| #define RK818_LDO_VSEL_MASK 0x1f |
| #define RK818_LDO3_ON_VSEL_MASK 0xf |
| #define RK818_BOOST_ON_VSEL_MASK 0xe0 |
| #define RK818_USB_ILIM_SEL_MASK 0x0f |
| #define RK818_USB_CHG_SD_VSEL_MASK 0x70 |
| |
| /* |
| * Ramp delay |
| */ |
| #define RK805_RAMP_RATE_OFFSET 3 |
| #define RK805_RAMP_RATE_MASK (3 << RK805_RAMP_RATE_OFFSET) |
| #define RK805_RAMP_RATE_3MV_PER_US (0 << RK805_RAMP_RATE_OFFSET) |
| #define RK805_RAMP_RATE_6MV_PER_US (1 << RK805_RAMP_RATE_OFFSET) |
| #define RK805_RAMP_RATE_12_5MV_PER_US (2 << RK805_RAMP_RATE_OFFSET) |
| #define RK805_RAMP_RATE_25MV_PER_US (3 << RK805_RAMP_RATE_OFFSET) |
| |
| #define RK808_RAMP_RATE_OFFSET 3 |
| #define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET) |
| #define RK808_RAMP_RATE_2MV_PER_US (0 << RK808_RAMP_RATE_OFFSET) |
| #define RK808_RAMP_RATE_4MV_PER_US (1 << RK808_RAMP_RATE_OFFSET) |
| #define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET) |
| #define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET) |
| |
| #define RK817_RAMP_RATE_OFFSET 6 |
| #define RK817_RAMP_RATE_MASK (0x3 << RK817_RAMP_RATE_OFFSET) |
| #define RK817_RAMP_RATE_3MV_PER_US (0x0 << RK817_RAMP_RATE_OFFSET) |
| #define RK817_RAMP_RATE_6_3MV_PER_US (0x1 << RK817_RAMP_RATE_OFFSET) |
| #define RK817_RAMP_RATE_12_5MV_PER_US (0x2 << RK817_RAMP_RATE_OFFSET) |
| #define RK817_RAMP_RATE_25MV_PER_US (0x3 << RK817_RAMP_RATE_OFFSET) |
| |
| struct rk8xx_reg_info { |
| uint min_uv; |
| uint step_uv; |
| u8 vsel_reg; |
| u8 vsel_sleep_reg; |
| u8 config_reg; |
| u8 vsel_mask; |
| u8 min_sel; |
| }; |
| |
| static const struct rk8xx_reg_info rk808_buck[] = { |
| { 712500, 12500, REG_BUCK1_ON_VSEL, REG_BUCK1_SLP_VSEL, REG_BUCK1_CONFIG, RK808_BUCK_VSEL_MASK, }, |
| { 712500, 12500, REG_BUCK2_ON_VSEL, REG_BUCK2_SLP_VSEL, REG_BUCK2_CONFIG, RK808_BUCK_VSEL_MASK, }, |
| { 712500, 12500, NA, NA, REG_BUCK3_CONFIG, RK808_BUCK_VSEL_MASK, }, |
| { 1800000, 100000, REG_BUCK4_ON_VSEL, REG_BUCK4_SLP_VSEL, REG_BUCK4_CONFIG, RK808_BUCK4_VSEL_MASK, }, |
| }; |
| |
| static const struct rk8xx_reg_info rk816_buck[] = { |
| /* buck 1 */ |
| { 712500, 12500, REG_BUCK1_ON_VSEL, REG_BUCK1_SLP_VSEL, REG_BUCK1_CONFIG, RK818_BUCK_VSEL_MASK, 0x00, }, |
| { 1800000, 200000, REG_BUCK1_ON_VSEL, REG_BUCK1_SLP_VSEL, REG_BUCK1_CONFIG, RK818_BUCK_VSEL_MASK, 0x3c, }, |
| { 2300000, 0, REG_BUCK1_ON_VSEL, REG_BUCK1_SLP_VSEL, REG_BUCK1_CONFIG, RK818_BUCK_VSEL_MASK, 0x3f, }, |
| /* buck 2 */ |
| { 712500, 12500, REG_BUCK2_ON_VSEL, REG_BUCK2_SLP_VSEL, REG_BUCK2_CONFIG, RK818_BUCK_VSEL_MASK, 0x00, }, |
| { 1800000, 200000, REG_BUCK2_ON_VSEL, REG_BUCK2_SLP_VSEL, REG_BUCK2_CONFIG, RK818_BUCK_VSEL_MASK, 0x3c, }, |
| { 2300000, 0, REG_BUCK2_ON_VSEL, REG_BUCK2_SLP_VSEL, REG_BUCK2_CONFIG, RK818_BUCK_VSEL_MASK, 0x3f, }, |
| /* buck 3 */ |
| { 712500, 12500, NA, NA, REG_BUCK3_CONFIG, RK818_BUCK_VSEL_MASK, }, |
| /* buck 4 */ |
| { 800000, 100000, REG_BUCK4_ON_VSEL, REG_BUCK4_SLP_VSEL, REG_BUCK4_CONFIG, RK818_BUCK4_VSEL_MASK, }, |
| }; |
| |
| static const struct rk8xx_reg_info rk809_buck5[] = { |
| /* buck 5 */ |
| { 1500000, 0, RK809_BUCK5_CONFIG(0), RK809_BUCK5_CONFIG(1), NA, RK809_BUCK5_VSEL_MASK, 0x00, }, |
| { 1800000, 200000, RK809_BUCK5_CONFIG(0), RK809_BUCK5_CONFIG(1), NA, RK809_BUCK5_VSEL_MASK, 0x01, }, |
| { 2800000, 200000, RK809_BUCK5_CONFIG(0), RK809_BUCK5_CONFIG(1), NA, RK809_BUCK5_VSEL_MASK, 0x04, }, |
| { 3300000, 300000, RK809_BUCK5_CONFIG(0), RK809_BUCK5_CONFIG(1), NA, RK809_BUCK5_VSEL_MASK, 0x06, }, |
| }; |
| |
| static const struct rk8xx_reg_info rk817_buck[] = { |
| /* buck 1 */ |
| { 500000, 12500, RK817_BUCK_ON_VSEL(1), RK817_BUCK_SLP_VSEL(1), RK817_BUCK_CONFIG(1), RK817_BUCK_VSEL_MASK, 0x00, }, |
| { 1500000, 100000, RK817_BUCK_ON_VSEL(1), RK817_BUCK_SLP_VSEL(1), RK817_BUCK_CONFIG(1), RK817_BUCK_VSEL_MASK, 0x50, }, |
| { 2400000, 0, RK817_BUCK_ON_VSEL(1), RK817_BUCK_SLP_VSEL(1), RK817_BUCK_CONFIG(1), RK817_BUCK_VSEL_MASK, 0x59, }, |
| /* buck 2 */ |
| { 500000, 12500, RK817_BUCK_ON_VSEL(2), RK817_BUCK_SLP_VSEL(2), RK817_BUCK_CONFIG(2), RK817_BUCK_VSEL_MASK, 0x00, }, |
| { 1500000, 100000, RK817_BUCK_ON_VSEL(2), RK817_BUCK_SLP_VSEL(2), RK817_BUCK_CONFIG(2), RK817_BUCK_VSEL_MASK, 0x50, }, |
| { 2400000, 0, RK817_BUCK_ON_VSEL(2), RK817_BUCK_SLP_VSEL(2), RK817_BUCK_CONFIG(2), RK817_BUCK_VSEL_MASK, 0x59, }, |
| /* buck 3 */ |
| { 500000, 12500, RK817_BUCK_ON_VSEL(3), RK817_BUCK_SLP_VSEL(3), RK817_BUCK_CONFIG(3), RK817_BUCK_VSEL_MASK, 0x00, }, |
| { 1500000, 100000, RK817_BUCK_ON_VSEL(3), RK817_BUCK_SLP_VSEL(3), RK817_BUCK_CONFIG(3), RK817_BUCK_VSEL_MASK, 0x50, }, |
| { 2400000, 0, RK817_BUCK_ON_VSEL(3), RK817_BUCK_SLP_VSEL(3), RK817_BUCK_CONFIG(3), RK817_BUCK_VSEL_MASK, 0x59, }, |
| /* buck 4 */ |
| { 500000, 12500, RK817_BUCK_ON_VSEL(4), RK817_BUCK_SLP_VSEL(4), RK817_BUCK_CONFIG(4), RK817_BUCK_VSEL_MASK, 0x00, }, |
| { 1500000, 100000, RK817_BUCK_ON_VSEL(4), RK817_BUCK_SLP_VSEL(4), RK817_BUCK_CONFIG(4), RK817_BUCK_VSEL_MASK, 0x50, }, |
| { 3400000, 0, RK817_BUCK_ON_VSEL(4), RK817_BUCK_SLP_VSEL(4), RK817_BUCK_CONFIG(4), RK817_BUCK_VSEL_MASK, 0x63, }, |
| }; |
| |
| static const struct rk8xx_reg_info rk818_buck[] = { |
| { 712500, 12500, REG_BUCK1_ON_VSEL, REG_BUCK1_SLP_VSEL, REG_BUCK1_CONFIG, RK818_BUCK_VSEL_MASK, }, |
| { 712500, 12500, REG_BUCK2_ON_VSEL, REG_BUCK2_SLP_VSEL, REG_BUCK2_CONFIG, RK818_BUCK_VSEL_MASK, }, |
| { 712500, 12500, NA, NA, REG_BUCK3_CONFIG, RK818_BUCK_VSEL_MASK, }, |
| { 1800000, 100000, REG_BUCK4_ON_VSEL, REG_BUCK4_SLP_VSEL, REG_BUCK4_CONFIG, RK818_BUCK4_VSEL_MASK, }, |
| }; |
| |
| #ifdef ENABLE_DRIVER |
| static const struct rk8xx_reg_info rk808_ldo[] = { |
| { 1800000, 100000, REG_LDO1_ON_VSEL, REG_LDO1_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, }, |
| { 1800000, 100000, REG_LDO2_ON_VSEL, REG_LDO2_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, }, |
| { 800000, 100000, REG_LDO3_ON_VSEL, REG_LDO3_SLP_VSEL, NA, RK808_BUCK4_VSEL_MASK, }, |
| { 1800000, 100000, REG_LDO4_ON_VSEL, REG_LDO4_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, }, |
| { 1800000, 100000, REG_LDO5_ON_VSEL, REG_LDO5_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, }, |
| { 800000, 100000, REG_LDO6_ON_VSEL, REG_LDO6_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, }, |
| { 800000, 100000, REG_LDO7_ON_VSEL, REG_LDO7_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, }, |
| { 1800000, 100000, REG_LDO8_ON_VSEL, REG_LDO8_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, }, |
| }; |
| |
| static const struct rk8xx_reg_info rk816_ldo[] = { |
| { 800000, 100000, REG_LDO1_ON_VSEL, REG_LDO1_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| { 800000, 100000, REG_LDO2_ON_VSEL, REG_LDO2_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| { 800000, 100000, REG_LDO3_ON_VSEL, REG_LDO3_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| { 800000, 100000, REG_LDO4_ON_VSEL, REG_LDO4_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| { 800000, 100000, REG_LDO5_ON_VSEL, REG_LDO5_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| { 800000, 100000, REG_LDO6_ON_VSEL, REG_LDO6_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| }; |
| |
| static const struct rk8xx_reg_info rk817_ldo[] = { |
| /* ldo1 */ |
| { 600000, 25000, RK817_LDO_ON_VSEL(1), RK817_LDO_SLP_VSEL(1), NA, RK817_LDO_VSEL_MASK, 0x00, }, |
| { 3400000, 0, RK817_LDO_ON_VSEL(1), RK817_LDO_SLP_VSEL(1), NA, RK817_LDO_VSEL_MASK, 0x70, }, |
| /* ldo2 */ |
| { 600000, 25000, RK817_LDO_ON_VSEL(2), RK817_LDO_SLP_VSEL(2), NA, RK817_LDO_VSEL_MASK, 0x00, }, |
| { 3400000, 0, RK817_LDO_ON_VSEL(2), RK817_LDO_SLP_VSEL(2), NA, RK817_LDO_VSEL_MASK, 0x70, }, |
| /* ldo3 */ |
| { 600000, 25000, RK817_LDO_ON_VSEL(3), RK817_LDO_SLP_VSEL(3), NA, RK817_LDO_VSEL_MASK, 0x00, }, |
| { 3400000, 0, RK817_LDO_ON_VSEL(3), RK817_LDO_SLP_VSEL(3), NA, RK817_LDO_VSEL_MASK, 0x70, }, |
| /* ldo4 */ |
| { 600000, 25000, RK817_LDO_ON_VSEL(4), RK817_LDO_SLP_VSEL(4), NA, RK817_LDO_VSEL_MASK, 0x00, }, |
| { 3400000, 0, RK817_LDO_ON_VSEL(4), RK817_LDO_SLP_VSEL(4), NA, RK817_LDO_VSEL_MASK, 0x70, }, |
| /* ldo5 */ |
| { 600000, 25000, RK817_LDO_ON_VSEL(5), RK817_LDO_SLP_VSEL(5), NA, RK817_LDO_VSEL_MASK, 0x00, }, |
| { 3400000, 0, RK817_LDO_ON_VSEL(5), RK817_LDO_SLP_VSEL(5), NA, RK817_LDO_VSEL_MASK, 0x70, }, |
| /* ldo6 */ |
| { 600000, 25000, RK817_LDO_ON_VSEL(6), RK817_LDO_SLP_VSEL(6), NA, RK817_LDO_VSEL_MASK, 0x00, }, |
| { 3400000, 0, RK817_LDO_ON_VSEL(6), RK817_LDO_SLP_VSEL(6), NA, RK817_LDO_VSEL_MASK, 0x70, }, |
| /* ldo7 */ |
| { 600000, 25000, RK817_LDO_ON_VSEL(7), RK817_LDO_SLP_VSEL(7), NA, RK817_LDO_VSEL_MASK, 0x00, }, |
| { 3400000, 0, RK817_LDO_ON_VSEL(7), RK817_LDO_SLP_VSEL(7), NA, RK817_LDO_VSEL_MASK, 0x70, }, |
| /* ldo8 */ |
| { 600000, 25000, RK817_LDO_ON_VSEL(8), RK817_LDO_SLP_VSEL(8), NA, RK817_LDO_VSEL_MASK, 0x00, }, |
| { 3400000, 0, RK817_LDO_ON_VSEL(8), RK817_LDO_SLP_VSEL(8), NA, RK817_LDO_VSEL_MASK, 0x70, }, |
| /* ldo9 */ |
| { 600000, 25000, RK817_LDO_ON_VSEL(9), RK817_LDO_SLP_VSEL(9), NA, RK817_LDO_VSEL_MASK, 0x00, }, |
| { 3400000, 0, RK817_LDO_ON_VSEL(9), RK817_LDO_SLP_VSEL(9), NA, RK817_LDO_VSEL_MASK, 0x70, }, |
| }; |
| |
| static const struct rk8xx_reg_info rk818_ldo[] = { |
| { 1800000, 100000, REG_LDO1_ON_VSEL, REG_LDO1_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| { 1800000, 100000, REG_LDO2_ON_VSEL, REG_LDO2_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| { 800000, 100000, REG_LDO3_ON_VSEL, REG_LDO3_SLP_VSEL, NA, RK818_LDO3_ON_VSEL_MASK, }, |
| { 1800000, 100000, REG_LDO4_ON_VSEL, REG_LDO4_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| { 1800000, 100000, REG_LDO5_ON_VSEL, REG_LDO5_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| { 800000, 100000, REG_LDO6_ON_VSEL, REG_LDO6_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| { 800000, 100000, REG_LDO7_ON_VSEL, REG_LDO7_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| { 1800000, 100000, REG_LDO8_ON_VSEL, REG_LDO8_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, }, |
| }; |
| #endif |
| |
| static const u16 rk818_chrg_cur_input_array[] = { |
| 450, 800, 850, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 |
| }; |
| |
| static const uint rk818_chrg_shutdown_vsel_array[] = { |
| 2780000, 2850000, 2920000, 2990000, 3060000, 3130000, 3190000, 3260000 |
| }; |
| |
| static const struct rk8xx_reg_info *get_buck_reg(struct udevice *pmic, |
| int num, int uvolt) |
| { |
| struct rk8xx_priv *priv = dev_get_priv(pmic); |
| |
| switch (priv->variant) { |
| case RK805_ID: |
| case RK816_ID: |
| switch (num) { |
| case 0: |
| case 1: |
| if (uvolt <= 1450000) |
| return &rk816_buck[num * 3 + 0]; |
| else if (uvolt <= 2200000) |
| return &rk816_buck[num * 3 + 1]; |
| else |
| return &rk816_buck[num * 3 + 2]; |
| default: |
| return &rk816_buck[num + 4]; |
| } |
| |
| case RK809_ID: |
| case RK817_ID: |
| switch (num) { |
| case 0 ... 2: |
| if (uvolt < 1500000) |
| return &rk817_buck[num * 3 + 0]; |
| else if (uvolt < 2400000) |
| return &rk817_buck[num * 3 + 1]; |
| else |
| return &rk817_buck[num * 3 + 2]; |
| case 3: |
| if (uvolt < 1500000) |
| return &rk817_buck[num * 3 + 0]; |
| else if (uvolt < 3400000) |
| return &rk817_buck[num * 3 + 1]; |
| else |
| return &rk817_buck[num * 3 + 2]; |
| /* BUCK5 for RK809 */ |
| default: |
| if (uvolt < 1800000) |
| return &rk809_buck5[0]; |
| else if (uvolt < 2800000) |
| return &rk809_buck5[1]; |
| else if (uvolt < 3300000) |
| return &rk809_buck5[2]; |
| else |
| return &rk809_buck5[3]; |
| } |
| case RK818_ID: |
| return &rk818_buck[num]; |
| default: |
| return &rk808_buck[num]; |
| } |
| } |
| |
| static int _buck_set_value(struct udevice *pmic, int buck, int uvolt) |
| { |
| const struct rk8xx_reg_info *info = get_buck_reg(pmic, buck, uvolt); |
| struct rk8xx_priv *priv = dev_get_priv(pmic); |
| int mask = info->vsel_mask; |
| int val; |
| |
| if (info->vsel_reg == NA) |
| return -ENOSYS; |
| |
| if (info->step_uv == 0) /* Fixed voltage */ |
| val = info->min_sel; |
| else |
| val = ((uvolt - info->min_uv) / info->step_uv) + info->min_sel; |
| |
| debug("%s: volt=%d, buck=%d, reg=0x%x, mask=0x%x, val=0x%x\n", |
| __func__, uvolt, buck + 1, info->vsel_reg, mask, val); |
| |
| if (priv->variant == RK816_ID) { |
| pmic_clrsetbits(pmic, info->vsel_reg, mask, val); |
| return pmic_clrsetbits(pmic, RK816_REG_DCDC_EN2, |
| 1 << 7, 1 << 7); |
| } else { |
| return pmic_clrsetbits(pmic, info->vsel_reg, mask, val); |
| } |
| } |
| |
| static int _buck_set_enable(struct udevice *pmic, int buck, bool enable) |
| { |
| uint mask, value, en_reg; |
| int ret = 0; |
| struct rk8xx_priv *priv = dev_get_priv(pmic); |
| |
| switch (priv->variant) { |
| case RK805_ID: |
| case RK816_ID: |
| if (buck >= 4) { |
| buck -= 4; |
| en_reg = RK816_REG_DCDC_EN2; |
| } else { |
| en_reg = RK816_REG_DCDC_EN1; |
| } |
| if (enable) |
| value = ((1 << buck) | (1 << (buck + 4))); |
| else |
| value = ((0 << buck) | (1 << (buck + 4))); |
| ret = pmic_reg_write(pmic, en_reg, value); |
| break; |
| |
| case RK808_ID: |
| case RK818_ID: |
| mask = 1 << buck; |
| if (enable) { |
| ret = pmic_clrsetbits(pmic, REG_DCDC_ILMAX, |
| 0, 3 << (buck * 2)); |
| if (ret) |
| return ret; |
| } |
| ret = pmic_clrsetbits(pmic, REG_DCDC_EN, mask, |
| enable ? mask : 0); |
| break; |
| case RK809_ID: |
| case RK817_ID: |
| if (buck < 4) { |
| if (enable) |
| value = ((1 << buck) | (1 << (buck + 4))); |
| else |
| value = ((0 << buck) | (1 << (buck + 4))); |
| ret = pmic_reg_write(pmic, RK817_POWER_EN(0), value); |
| /* BUCK5 for RK809 */ |
| } else { |
| if (enable) |
| value = ((1 << 1) | (1 << 5)); |
| else |
| value = ((0 << 1) | (1 << 5)); |
| ret = pmic_reg_write(pmic, RK817_POWER_EN(3), value); |
| } |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| #ifdef ENABLE_DRIVER |
| static int _buck_set_suspend_value(struct udevice *pmic, int buck, int uvolt) |
| { |
| const struct rk8xx_reg_info *info = get_buck_reg(pmic, buck, uvolt); |
| int mask = info->vsel_mask; |
| int val; |
| |
| if (info->vsel_sleep_reg == NA) |
| return -ENOSYS; |
| |
| if (info->step_uv == 0) |
| val = info->min_sel; |
| else |
| val = ((uvolt - info->min_uv) / info->step_uv) + info->min_sel; |
| |
| debug("%s: volt=%d, buck=%d, reg=0x%x, mask=0x%x, val=0x%x\n", |
| __func__, uvolt, buck + 1, info->vsel_sleep_reg, mask, val); |
| |
| return pmic_clrsetbits(pmic, info->vsel_sleep_reg, mask, val); |
| } |
| |
| static int _buck_get_enable(struct udevice *pmic, int buck) |
| { |
| struct rk8xx_priv *priv = dev_get_priv(pmic); |
| uint mask = 0; |
| int ret = 0; |
| |
| switch (priv->variant) { |
| case RK805_ID: |
| case RK816_ID: |
| if (buck >= 4) { |
| mask = 1 << (buck - 4); |
| ret = pmic_reg_read(pmic, RK816_REG_DCDC_EN2); |
| } else { |
| mask = 1 << buck; |
| ret = pmic_reg_read(pmic, RK816_REG_DCDC_EN1); |
| } |
| break; |
| case RK808_ID: |
| case RK818_ID: |
| mask = 1 << buck; |
| ret = pmic_reg_read(pmic, REG_DCDC_EN); |
| if (ret < 0) |
| return ret; |
| break; |
| case RK809_ID: |
| case RK817_ID: |
| if (buck < 4) { |
| mask = 1 << buck; |
| ret = pmic_reg_read(pmic, RK817_POWER_EN(0)); |
| /* BUCK5 for RK809 */ |
| } else { |
| mask = 1 << 1; |
| ret = pmic_reg_read(pmic, RK817_POWER_EN(3)); |
| } |
| break; |
| } |
| |
| if (ret < 0) |
| return ret; |
| |
| return ret & mask ? true : false; |
| } |
| |
| static int _buck_set_suspend_enable(struct udevice *pmic, int buck, bool enable) |
| { |
| uint mask = 0; |
| int ret; |
| struct rk8xx_priv *priv = dev_get_priv(pmic); |
| |
| switch (priv->variant) { |
| case RK805_ID: |
| case RK816_ID: |
| mask = 1 << buck; |
| ret = pmic_clrsetbits(pmic, RK816_REG_DCDC_SLP_EN, mask, |
| enable ? mask : 0); |
| break; |
| case RK808_ID: |
| case RK818_ID: |
| mask = 1 << buck; |
| ret = pmic_clrsetbits(pmic, REG_SLEEP_SET_OFF1, mask, |
| enable ? 0 : mask); |
| break; |
| case RK809_ID: |
| case RK817_ID: |
| if (buck < 4) |
| mask = 1 << buck; |
| else |
| mask = 1 << 5; /* BUCK5 for RK809 */ |
| ret = pmic_clrsetbits(pmic, RK817_POWER_SLP_EN(0), mask, |
| enable ? mask : 0); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int _buck_get_suspend_enable(struct udevice *pmic, int buck) |
| { |
| struct rk8xx_priv *priv = dev_get_priv(pmic); |
| int ret, val; |
| uint mask = 0; |
| |
| switch (priv->variant) { |
| case RK805_ID: |
| case RK816_ID: |
| mask = 1 << buck; |
| val = pmic_reg_read(pmic, RK816_REG_DCDC_SLP_EN); |
| if (val < 0) |
| return val; |
| ret = val & mask ? 1 : 0; |
| break; |
| case RK808_ID: |
| case RK818_ID: |
| mask = 1 << buck; |
| val = pmic_reg_read(pmic, REG_SLEEP_SET_OFF1); |
| if (val < 0) |
| return val; |
| ret = val & mask ? 0 : 1; |
| break; |
| case RK809_ID: |
| case RK817_ID: |
| if (buck < 4) |
| mask = 1 << buck; |
| else |
| mask = 1 << 5; /* BUCK5 for RK809 */ |
| |
| val = pmic_reg_read(pmic, RK817_POWER_SLP_EN(0)); |
| if (val < 0) |
| return val; |
| ret = val & mask ? 1 : 0; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static const struct rk8xx_reg_info *get_ldo_reg(struct udevice *pmic, |
| int num, int uvolt) |
| { |
| struct rk8xx_priv *priv = dev_get_priv(pmic); |
| |
| switch (priv->variant) { |
| case RK805_ID: |
| case RK816_ID: |
| return &rk816_ldo[num]; |
| case RK809_ID: |
| case RK817_ID: |
| if (uvolt < 3400000) |
| return &rk817_ldo[num * 2 + 0]; |
| else |
| return &rk817_ldo[num * 2 + 1]; |
| case RK818_ID: |
| return &rk818_ldo[num]; |
| default: |
| return &rk808_ldo[num]; |
| } |
| } |
| |
| static int _ldo_get_enable(struct udevice *pmic, int ldo) |
| { |
| struct rk8xx_priv *priv = dev_get_priv(pmic); |
| uint mask = 0; |
| int ret = 0; |
| |
| switch (priv->variant) { |
| case RK805_ID: |
| case RK816_ID: |
| if (ldo >= 4) { |
| mask = 1 << (ldo - 4); |
| ret = pmic_reg_read(pmic, RK816_REG_LDO_EN2); |
| } else { |
| mask = 1 << ldo; |
| ret = pmic_reg_read(pmic, RK816_REG_LDO_EN1); |
| } |
| break; |
| case RK808_ID: |
| case RK818_ID: |
| mask = 1 << ldo; |
| ret = pmic_reg_read(pmic, REG_LDO_EN); |
| if (ret < 0) |
| return ret; |
| break; |
| case RK809_ID: |
| case RK817_ID: |
| if (ldo < 4) { |
| mask = 1 << ldo; |
| ret = pmic_reg_read(pmic, RK817_POWER_EN(1)); |
| } else if (ldo < 8) { |
| mask = 1 << (ldo - 4); |
| ret = pmic_reg_read(pmic, RK817_POWER_EN(2)); |
| } else if (ldo == 8) { |
| mask = 1 << 0; |
| ret = pmic_reg_read(pmic, RK817_POWER_EN(3)); |
| } else { |
| return false; |
| } |
| break; |
| } |
| |
| if (ret < 0) |
| return ret; |
| |
| return ret & mask ? true : false; |
| } |
| |
| static int _ldo_set_enable(struct udevice *pmic, int ldo, bool enable) |
| { |
| struct rk8xx_priv *priv = dev_get_priv(pmic); |
| uint mask, value, en_reg; |
| int ret = 0; |
| |
| switch (priv->variant) { |
| case RK805_ID: |
| case RK816_ID: |
| if (ldo >= 4) { |
| ldo -= 4; |
| en_reg = RK816_REG_LDO_EN2; |
| } else { |
| en_reg = RK816_REG_LDO_EN1; |
| } |
| if (enable) |
| value = ((1 << ldo) | (1 << (ldo + 4))); |
| else |
| value = ((0 << ldo) | (1 << (ldo + 4))); |
| |
| ret = pmic_reg_write(pmic, en_reg, value); |
| break; |
| case RK808_ID: |
| case RK818_ID: |
| mask = 1 << ldo; |
| ret = pmic_clrsetbits(pmic, REG_LDO_EN, mask, |
| enable ? mask : 0); |
| break; |
| case RK809_ID: |
| case RK817_ID: |
| if (ldo < 4) { |
| en_reg = RK817_POWER_EN(1); |
| } else if (ldo < 8) { |
| ldo -= 4; |
| en_reg = RK817_POWER_EN(2); |
| } else if (ldo == 8) { |
| ldo = 0; /* BIT 0 */ |
| en_reg = RK817_POWER_EN(3); |
| } else { |
| return -EINVAL; |
| } |
| if (enable) |
| value = ((1 << ldo) | (1 << (ldo + 4))); |
| else |
| value = ((0 << ldo) | (1 << (ldo + 4))); |
| ret = pmic_reg_write(pmic, en_reg, value); |
| break; |
| } |
| |
| if (enable) |
| udelay(500); |
| |
| return ret; |
| } |
| |
| static int _ldo_set_suspend_enable(struct udevice *pmic, int ldo, bool enable) |
| { |
| struct rk8xx_priv *priv = dev_get_priv(pmic); |
| uint mask; |
| int ret = 0; |
| |
| switch (priv->variant) { |
| case RK805_ID: |
| case RK816_ID: |
| mask = 1 << ldo; |
| ret = pmic_clrsetbits(pmic, RK816_REG_LDO_SLP_EN, mask, |
| enable ? mask : 0); |
| break; |
| case RK808_ID: |
| case RK818_ID: |
| mask = 1 << ldo; |
| ret = pmic_clrsetbits(pmic, REG_SLEEP_SET_OFF2, mask, |
| enable ? 0 : mask); |
| break; |
| case RK809_ID: |
| case RK817_ID: |
| if (ldo == 8) { |
| mask = 1 << 4; /* LDO9 */ |
| ret = pmic_clrsetbits(pmic, RK817_POWER_SLP_EN(0), mask, |
| enable ? mask : 0); |
| } else { |
| mask = 1 << ldo; |
| ret = pmic_clrsetbits(pmic, RK817_POWER_SLP_EN(1), mask, |
| enable ? mask : 0); |
| } |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int _ldo_get_suspend_enable(struct udevice *pmic, int ldo) |
| { |
| struct rk8xx_priv *priv = dev_get_priv(pmic); |
| int val, ret = 0; |
| uint mask; |
| |
| switch (priv->variant) { |
| case RK805_ID: |
| case RK816_ID: |
| mask = 1 << ldo; |
| val = pmic_reg_read(pmic, RK816_REG_LDO_SLP_EN); |
| if (val < 0) |
| return val; |
| ret = val & mask ? 1 : 0; |
| break; |
| case RK808_ID: |
| case RK818_ID: |
| mask = 1 << ldo; |
| val = pmic_reg_read(pmic, REG_SLEEP_SET_OFF2); |
| if (val < 0) |
| return val; |
| ret = val & mask ? 0 : 1; |
| break; |
| case RK809_ID: |
| case RK817_ID: |
| if (ldo == 8) { |
| mask = 1 << 4; /* LDO9 */ |
| val = pmic_reg_read(pmic, RK817_POWER_SLP_EN(0)); |
| if (val < 0) |
| return val; |
| ret = val & mask ? 1 : 0; |
| } else { |
| mask = 1 << ldo; |
| val = pmic_reg_read(pmic, RK817_POWER_SLP_EN(1)); |
| if (val < 0) |
| return val; |
| ret = val & mask ? 1 : 0; |
| } |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int buck_get_value(struct udevice *dev) |
| { |
| int buck = dev->driver_data - 1; |
| /* We assume level-1 voltage is enough for usage in U-Boot */ |
| const struct rk8xx_reg_info *info = get_buck_reg(dev->parent, buck, 0); |
| int mask = info->vsel_mask; |
| int ret, val; |
| |
| if (info->vsel_reg == NA) |
| return -ENOSYS; |
| |
| ret = pmic_reg_read(dev->parent, info->vsel_reg); |
| if (ret < 0) |
| return ret; |
| val = ret & mask; |
| |
| return info->min_uv + val * info->step_uv; |
| } |
| |
| static int buck_set_value(struct udevice *dev, int uvolt) |
| { |
| int buck = dev->driver_data - 1; |
| |
| return _buck_set_value(dev->parent, buck, uvolt); |
| } |
| |
| static int buck_get_suspend_value(struct udevice *dev) |
| { |
| int buck = dev->driver_data - 1; |
| /* We assume level-1 voltage is enough for usage in U-Boot */ |
| const struct rk8xx_reg_info *info = get_buck_reg(dev->parent, buck, 0); |
| int mask = info->vsel_mask; |
| int ret, val; |
| |
| if (info->vsel_sleep_reg == NA) |
| return -ENOSYS; |
| |
| ret = pmic_reg_read(dev->parent, info->vsel_sleep_reg); |
| if (ret < 0) |
| return ret; |
| |
| val = ret & mask; |
| |
| return info->min_uv + val * info->step_uv; |
| } |
| |
| static int buck_set_suspend_value(struct udevice *dev, int uvolt) |
| { |
| int buck = dev->driver_data - 1; |
| |
| return _buck_set_suspend_value(dev->parent, buck, uvolt); |
| } |
| |
| static int buck_set_enable(struct udevice *dev, bool enable) |
| { |
| int buck = dev->driver_data - 1; |
| |
| return _buck_set_enable(dev->parent, buck, enable); |
| } |
| |
| static int buck_set_suspend_enable(struct udevice *dev, bool enable) |
| { |
| int buck = dev->driver_data - 1; |
| |
| return _buck_set_suspend_enable(dev->parent, buck, enable); |
| } |
| |
| static int buck_get_suspend_enable(struct udevice *dev) |
| { |
| int buck = dev->driver_data - 1; |
| |
| return _buck_get_suspend_enable(dev->parent, buck); |
| } |
| |
| static int buck_get_enable(struct udevice *dev) |
| { |
| int buck = dev->driver_data - 1; |
| |
| return _buck_get_enable(dev->parent, buck); |
| } |
| |
| static int ldo_get_value(struct udevice *dev) |
| { |
| int ldo = dev->driver_data - 1; |
| const struct rk8xx_reg_info *info = get_ldo_reg(dev->parent, ldo, 0); |
| int mask = info->vsel_mask; |
| int ret, val; |
| |
| if (info->vsel_reg == NA) |
| return -ENOSYS; |
| ret = pmic_reg_read(dev->parent, info->vsel_reg); |
| if (ret < 0) |
| return ret; |
| val = ret & mask; |
| |
| return info->min_uv + val * info->step_uv; |
| } |
| |
| static int ldo_set_value(struct udevice *dev, int uvolt) |
| { |
| int ldo = dev->driver_data - 1; |
| const struct rk8xx_reg_info *info = get_ldo_reg(dev->parent, ldo, uvolt); |
| int mask = info->vsel_mask; |
| int val; |
| |
| if (info->vsel_reg == NA) |
| return -ENOSYS; |
| |
| if (info->step_uv == 0) |
| val = info->min_sel; |
| else |
| val = ((uvolt - info->min_uv) / info->step_uv) + info->min_sel; |
| |
| debug("%s: volt=%d, ldo=%d, reg=0x%x, mask=0x%x, val=0x%x\n", |
| __func__, uvolt, ldo + 1, info->vsel_reg, mask, val); |
| |
| return pmic_clrsetbits(dev->parent, info->vsel_reg, mask, val); |
| } |
| |
| static int ldo_set_suspend_value(struct udevice *dev, int uvolt) |
| { |
| int ldo = dev->driver_data - 1; |
| const struct rk8xx_reg_info *info = get_ldo_reg(dev->parent, ldo, uvolt); |
| int mask = info->vsel_mask; |
| int val; |
| |
| if (info->vsel_sleep_reg == NA) |
| return -ENOSYS; |
| |
| if (info->step_uv == 0) |
| val = info->min_sel; |
| else |
| val = ((uvolt - info->min_uv) / info->step_uv) + info->min_sel; |
| |
| debug("%s: volt=%d, ldo=%d, reg=0x%x, mask=0x%x, val=0x%x\n", |
| __func__, uvolt, ldo + 1, info->vsel_sleep_reg, mask, val); |
| |
| return pmic_clrsetbits(dev->parent, info->vsel_sleep_reg, mask, val); |
| } |
| |
| static int ldo_get_suspend_value(struct udevice *dev) |
| { |
| int ldo = dev->driver_data - 1; |
| const struct rk8xx_reg_info *info = get_ldo_reg(dev->parent, ldo, 0); |
| int mask = info->vsel_mask; |
| int val, ret; |
| |
| if (info->vsel_sleep_reg == NA) |
| return -ENOSYS; |
| |
| ret = pmic_reg_read(dev->parent, info->vsel_sleep_reg); |
| if (ret < 0) |
| return ret; |
| |
| val = ret & mask; |
| |
| return info->min_uv + val * info->step_uv; |
| } |
| |
| static int ldo_set_enable(struct udevice *dev, bool enable) |
| { |
| int ldo = dev->driver_data - 1; |
| |
| return _ldo_set_enable(dev->parent, ldo, enable); |
| } |
| |
| static int ldo_set_suspend_enable(struct udevice *dev, bool enable) |
| { |
| int ldo = dev->driver_data - 1; |
| |
| return _ldo_set_suspend_enable(dev->parent, ldo, enable); |
| } |
| |
| static int ldo_get_suspend_enable(struct udevice *dev) |
| { |
| int ldo = dev->driver_data - 1; |
| |
| return _ldo_get_suspend_enable(dev->parent, ldo); |
| } |
| |
| static int ldo_get_enable(struct udevice *dev) |
| { |
| int ldo = dev->driver_data - 1; |
| |
| return _ldo_get_enable(dev->parent, ldo); |
| } |
| |
| static int switch_set_enable(struct udevice *dev, bool enable) |
| { |
| struct rk8xx_priv *priv = dev_get_priv(dev->parent); |
| int ret = 0, sw = dev->driver_data - 1; |
| uint mask = 0; |
| |
| switch (priv->variant) { |
| case RK808_ID: |
| mask = 1 << (sw + 5); |
| ret = pmic_clrsetbits(dev->parent, REG_DCDC_EN, mask, |
| enable ? mask : 0); |
| break; |
| case RK809_ID: |
| mask = (1 << (sw + 2)) | (1 << (sw + 6)); |
| ret = pmic_clrsetbits(dev->parent, RK817_POWER_EN(3), mask, |
| enable ? mask : 0); |
| break; |
| case RK818_ID: |
| mask = 1 << 6; |
| ret = pmic_clrsetbits(dev->parent, REG_DCDC_EN, mask, |
| enable ? mask : 0); |
| break; |
| } |
| |
| debug("%s: switch%d, enable=%d, mask=0x%x\n", |
| __func__, sw + 1, enable, mask); |
| |
| return ret; |
| } |
| |
| static int switch_get_enable(struct udevice *dev) |
| { |
| struct rk8xx_priv *priv = dev_get_priv(dev->parent); |
| int ret = 0, sw = dev->driver_data - 1; |
| uint mask = 0; |
| |
| switch (priv->variant) { |
| case RK808_ID: |
| mask = 1 << (sw + 5); |
| ret = pmic_reg_read(dev->parent, REG_DCDC_EN); |
| break; |
| case RK809_ID: |
| mask = 1 << (sw + 2); |
| ret = pmic_reg_read(dev->parent, RK817_POWER_EN(3)); |
| break; |
| case RK818_ID: |
| mask = 1 << 6; |
| ret = pmic_reg_read(dev->parent, REG_DCDC_EN); |
| break; |
| } |
| |
| if (ret < 0) |
| return ret; |
| |
| return ret & mask ? true : false; |
| } |
| |
| static int switch_set_suspend_value(struct udevice *dev, int uvolt) |
| { |
| return 0; |
| } |
| |
| static int switch_get_suspend_value(struct udevice *dev) |
| { |
| return 0; |
| } |
| |
| static int switch_set_suspend_enable(struct udevice *dev, bool enable) |
| { |
| struct rk8xx_priv *priv = dev_get_priv(dev->parent); |
| int ret = 0, sw = dev->driver_data - 1; |
| uint mask = 0; |
| |
| switch (priv->variant) { |
| case RK808_ID: |
| mask = 1 << (sw + 5); |
| ret = pmic_clrsetbits(dev->parent, REG_SLEEP_SET_OFF1, mask, |
| enable ? 0 : mask); |
| break; |
| case RK809_ID: |
| mask = 1 << (sw + 6); |
| ret = pmic_clrsetbits(dev->parent, RK817_POWER_SLP_EN(0), mask, |
| enable ? mask : 0); |
| break; |
| case RK818_ID: |
| mask = 1 << 6; |
| ret = pmic_clrsetbits(dev->parent, REG_SLEEP_SET_OFF1, mask, |
| enable ? 0 : mask); |
| break; |
| } |
| |
| debug("%s: switch%d, enable=%d, mask=0x%x\n", |
| __func__, sw + 1, enable, mask); |
| |
| return ret; |
| } |
| |
| static int switch_get_suspend_enable(struct udevice *dev) |
| { |
| struct rk8xx_priv *priv = dev_get_priv(dev->parent); |
| int val, ret = 0, sw = dev->driver_data - 1; |
| uint mask = 0; |
| |
| switch (priv->variant) { |
| case RK808_ID: |
| mask = 1 << (sw + 5); |
| val = pmic_reg_read(dev->parent, REG_SLEEP_SET_OFF1); |
| if (val < 0) |
| return val; |
| ret = val & mask ? 0 : 1; |
| break; |
| case RK809_ID: |
| mask = 1 << (sw + 6); |
| val = pmic_reg_read(dev->parent, RK817_POWER_SLP_EN(0)); |
| if (val < 0) |
| return val; |
| ret = val & mask ? 1 : 0; |
| break; |
| case RK818_ID: |
| mask = 1 << 6; |
| val = pmic_reg_read(dev->parent, REG_SLEEP_SET_OFF1); |
| if (val < 0) |
| return val; |
| ret = val & mask ? 0 : 1; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * RK8xx switch does not need to set the voltage, |
| * but if dts set regulator-min-microvolt/regulator-max-microvolt, |
| * will cause regulator set value fail and not to enable this switch. |
| * So add an empty function to return success. |
| */ |
| static int switch_get_value(struct udevice *dev) |
| { |
| return 0; |
| } |
| |
| static int switch_set_value(struct udevice *dev, int uvolt) |
| { |
| return 0; |
| } |
| |
| static int rk8xx_buck_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_plat *uc_pdata; |
| |
| uc_pdata = dev_get_uclass_plat(dev); |
| |
| uc_pdata->type = REGULATOR_TYPE_BUCK; |
| uc_pdata->mode_count = 0; |
| |
| return 0; |
| } |
| |
| static int rk8xx_ldo_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_plat *uc_pdata; |
| |
| uc_pdata = dev_get_uclass_plat(dev); |
| |
| uc_pdata->type = REGULATOR_TYPE_LDO; |
| uc_pdata->mode_count = 0; |
| |
| return 0; |
| } |
| |
| static int rk8xx_switch_probe(struct udevice *dev) |
| { |
| struct dm_regulator_uclass_plat *uc_pdata; |
| |
| uc_pdata = dev_get_uclass_plat(dev); |
| |
| uc_pdata->type = REGULATOR_TYPE_FIXED; |
| uc_pdata->mode_count = 0; |
| |
| return 0; |
| } |
| |
| static const struct dm_regulator_ops rk8xx_buck_ops = { |
| .get_value = buck_get_value, |
| .set_value = buck_set_value, |
| .set_suspend_value = buck_set_suspend_value, |
| .get_suspend_value = buck_get_suspend_value, |
| .get_enable = buck_get_enable, |
| .set_enable = buck_set_enable, |
| .set_suspend_enable = buck_set_suspend_enable, |
| .get_suspend_enable = buck_get_suspend_enable, |
| }; |
| |
| static const struct dm_regulator_ops rk8xx_ldo_ops = { |
| .get_value = ldo_get_value, |
| .set_value = ldo_set_value, |
| .set_suspend_value = ldo_set_suspend_value, |
| .get_suspend_value = ldo_get_suspend_value, |
| .get_enable = ldo_get_enable, |
| .set_enable = ldo_set_enable, |
| .set_suspend_enable = ldo_set_suspend_enable, |
| .get_suspend_enable = ldo_get_suspend_enable, |
| }; |
| |
| static const struct dm_regulator_ops rk8xx_switch_ops = { |
| .get_value = switch_get_value, |
| .set_value = switch_set_value, |
| .get_enable = switch_get_enable, |
| .set_enable = switch_set_enable, |
| .set_suspend_enable = switch_set_suspend_enable, |
| .get_suspend_enable = switch_get_suspend_enable, |
| .set_suspend_value = switch_set_suspend_value, |
| .get_suspend_value = switch_get_suspend_value, |
| }; |
| |
| U_BOOT_DRIVER(rk8xx_buck) = { |
| .name = "rk8xx_buck", |
| .id = UCLASS_REGULATOR, |
| .ops = &rk8xx_buck_ops, |
| .probe = rk8xx_buck_probe, |
| }; |
| |
| U_BOOT_DRIVER(rk8xx_ldo) = { |
| .name = "rk8xx_ldo", |
| .id = UCLASS_REGULATOR, |
| .ops = &rk8xx_ldo_ops, |
| .probe = rk8xx_ldo_probe, |
| }; |
| |
| U_BOOT_DRIVER(rk8xx_switch) = { |
| .name = "rk8xx_switch", |
| .id = UCLASS_REGULATOR, |
| .ops = &rk8xx_switch_ops, |
| .probe = rk8xx_switch_probe, |
| }; |
| #endif |
| |
| int rk8xx_spl_configure_buck(struct udevice *pmic, int buck, int uvolt) |
| { |
| int ret; |
| |
| ret = _buck_set_value(pmic, buck, uvolt); |
| if (ret) |
| return ret; |
| |
| return _buck_set_enable(pmic, buck, true); |
| } |
| |
| int rk818_spl_configure_usb_input_current(struct udevice *pmic, int current_ma) |
| { |
| uint i; |
| |
| for (i = 0; i < ARRAY_SIZE(rk818_chrg_cur_input_array); i++) |
| if (current_ma <= rk818_chrg_cur_input_array[i]) |
| break; |
| |
| return pmic_clrsetbits(pmic, REG_USB_CTRL, RK818_USB_ILIM_SEL_MASK, i); |
| } |
| |
| int rk818_spl_configure_usb_chrg_shutdown(struct udevice *pmic, int uvolt) |
| { |
| uint i; |
| |
| for (i = 0; i < ARRAY_SIZE(rk818_chrg_shutdown_vsel_array); i++) |
| if (uvolt <= rk818_chrg_shutdown_vsel_array[i]) |
| break; |
| |
| return pmic_clrsetbits(pmic, REG_USB_CTRL, RK818_USB_CHG_SD_VSEL_MASK, |
| i); |
| } |