| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * NXP C45 PHY driver |
| * |
| * Copyright 2021 NXP |
| * Author: Radu Pirea <radu-nicolae.pirea@oss.nxp.com> |
| */ |
| #include <common.h> |
| #include <dm.h> |
| #include <dm/devres.h> |
| #include <linux/delay.h> |
| #include <linux/math64.h> |
| #include <linux/mdio.h> |
| #include <phy.h> |
| |
| #define PHY_ID_TJA_1103 0x001BB010 |
| |
| #define VEND1_DEVICE_CONTROL 0x0040 |
| #define DEVICE_CONTROL_RESET BIT(15) |
| #define DEVICE_CONTROL_CONFIG_GLOBAL_EN BIT(14) |
| #define DEVICE_CONTROL_CONFIG_ALL_EN BIT(13) |
| |
| #define VEND1_PORT_CONTROL 0x8040 |
| #define PORT_CONTROL_EN BIT(14) |
| |
| #define VEND1_PHY_CONTROL 0x8100 |
| #define PHY_CONFIG_EN BIT(14) |
| #define PHY_START_OP BIT(0) |
| |
| #define VEND1_PHY_CONFIG 0x8108 |
| #define PHY_CONFIG_AUTO BIT(0) |
| |
| #define VEND1_PORT_INFRA_CONTROL 0xAC00 |
| #define PORT_INFRA_CONTROL_EN BIT(14) |
| |
| #define VEND1_RXID 0xAFCC |
| #define VEND1_TXID 0xAFCD |
| #define ID_ENABLE BIT(15) |
| |
| #define VEND1_ABILITIES 0xAFC4 |
| #define RGMII_ID_ABILITY BIT(15) |
| #define RGMII_ABILITY BIT(14) |
| #define RMII_ABILITY BIT(10) |
| #define REVMII_ABILITY BIT(9) |
| #define MII_ABILITY BIT(8) |
| #define SGMII_ABILITY BIT(0) |
| |
| #define VEND1_MII_BASIC_CONFIG 0xAFC6 |
| #define MII_BASIC_CONFIG_REV BIT(8) |
| #define MII_BASIC_CONFIG_SGMII 0x9 |
| #define MII_BASIC_CONFIG_RGMII 0x7 |
| #define MII_BASIC_CONFIG_RMII 0x5 |
| #define MII_BASIC_CONFIG_MII 0x4 |
| |
| #define RGMII_PERIOD_PS 8000U |
| #define PS_PER_DEGREE div_u64(RGMII_PERIOD_PS, 360) |
| #define MIN_ID_PS 1644U |
| #define MAX_ID_PS 2260U |
| #define DEFAULT_ID_PS 2000U |
| |
| #define RESET_DELAY_MS 25 |
| #define CONF_EN_DELAY_US 450 |
| |
| struct nxp_c45_phy { |
| u32 tx_delay; |
| u32 rx_delay; |
| }; |
| |
| static int nxp_c45_soft_reset(struct phy_device *phydev) |
| { |
| int tries = 10, ret; |
| |
| ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_CONTROL, |
| DEVICE_CONTROL_RESET); |
| if (ret) |
| return ret; |
| |
| do { |
| ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, |
| VEND1_DEVICE_CONTROL); |
| if (!(ret & DEVICE_CONTROL_RESET)) |
| return 0; |
| mdelay(RESET_DELAY_MS); |
| } while (tries--); |
| |
| return -EIO; |
| } |
| |
| static int nxp_c45_start_op(struct phy_device *phydev) |
| { |
| return phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONTROL, |
| PHY_START_OP); |
| } |
| |
| static int nxp_c45_config_enable(struct phy_device *phydev) |
| { |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_CONTROL, |
| DEVICE_CONTROL_CONFIG_GLOBAL_EN | |
| DEVICE_CONTROL_CONFIG_ALL_EN); |
| udelay(CONF_EN_DELAY_US); |
| |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PORT_CONTROL, |
| PORT_CONTROL_EN); |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONTROL, |
| PHY_CONFIG_EN); |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PORT_INFRA_CONTROL, |
| PORT_INFRA_CONTROL_EN); |
| |
| return 0; |
| } |
| |
| static u64 nxp_c45_get_phase_shift(u64 phase_offset_raw) |
| { |
| /* The delay in degree phase is 73.8 + phase_offset_raw * 0.9. |
| * To avoid floating point operations we'll multiply by 10 |
| * and get 1 decimal point precision. |
| */ |
| phase_offset_raw *= 10; |
| phase_offset_raw -= 738; |
| return div_u64(phase_offset_raw, 9); |
| } |
| |
| static void nxp_c45_disable_delays(struct phy_device *phydev) |
| { |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID, 0); |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID, 0); |
| } |
| |
| static int nxp_c45_check_delay(struct phy_device *phydev, u32 delay) |
| { |
| if (delay < MIN_ID_PS) { |
| pr_err("%s: delay value smaller than %u\n", |
| phydev->drv->name, MIN_ID_PS); |
| return -EINVAL; |
| } |
| |
| if (delay > MAX_ID_PS) { |
| pr_err("%s: delay value higher than %u\n", |
| phydev->drv->name, MAX_ID_PS); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int nxp_c45_get_delays(struct phy_device *phydev) |
| { |
| struct nxp_c45_phy *priv = phydev->priv; |
| int ret; |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { |
| ret = dev_read_u32(phydev->dev, "tx-internal-delay-ps", |
| &priv->tx_delay); |
| if (ret) |
| priv->tx_delay = DEFAULT_ID_PS; |
| |
| ret = nxp_c45_check_delay(phydev, priv->tx_delay); |
| if (ret) { |
| pr_err("%s: tx-internal-delay-ps invalid value\n", |
| phydev->drv->name); |
| return ret; |
| } |
| } |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { |
| ret = dev_read_u32(phydev->dev, "rx-internal-delay-ps", |
| &priv->rx_delay); |
| if (ret) |
| priv->rx_delay = DEFAULT_ID_PS; |
| |
| ret = nxp_c45_check_delay(phydev, priv->rx_delay); |
| if (ret) { |
| pr_err("%s: rx-internal-delay-ps invalid value\n", |
| phydev->drv->name); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void nxp_c45_set_delays(struct phy_device *phydev) |
| { |
| struct nxp_c45_phy *priv = phydev->priv; |
| u64 tx_delay = priv->tx_delay; |
| u64 rx_delay = priv->rx_delay; |
| u64 degree; |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { |
| degree = div_u64(tx_delay, PS_PER_DEGREE); |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID, |
| ID_ENABLE | nxp_c45_get_phase_shift(degree)); |
| } else { |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_TXID, 0); |
| } |
| |
| if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || |
| phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { |
| degree = div_u64(rx_delay, PS_PER_DEGREE); |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID, |
| ID_ENABLE | nxp_c45_get_phase_shift(degree)); |
| } else { |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_RXID, 0); |
| } |
| } |
| |
| static int nxp_c45_set_phy_mode(struct phy_device *phydev) |
| { |
| int ret; |
| |
| ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_ABILITIES); |
| pr_debug("%s: Clause 45 managed PHY abilities 0x%x\n", |
| phydev->drv->name, ret); |
| |
| switch (phydev->interface) { |
| case PHY_INTERFACE_MODE_RGMII: |
| if (!(ret & RGMII_ABILITY)) { |
| pr_err("%s: rgmii mode not supported\n", |
| phydev->drv->name); |
| return -EINVAL; |
| } |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG, |
| MII_BASIC_CONFIG_RGMII); |
| nxp_c45_disable_delays(phydev); |
| break; |
| case PHY_INTERFACE_MODE_RGMII_ID: |
| case PHY_INTERFACE_MODE_RGMII_TXID: |
| case PHY_INTERFACE_MODE_RGMII_RXID: |
| if (!(ret & RGMII_ID_ABILITY)) { |
| pr_err("%s: rgmii-id, rgmii-txid, rgmii-rxid modes are not supported\n", |
| phydev->drv->name); |
| return -EINVAL; |
| } |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG, |
| MII_BASIC_CONFIG_RGMII); |
| ret = nxp_c45_get_delays(phydev); |
| if (ret) |
| return ret; |
| |
| nxp_c45_set_delays(phydev); |
| break; |
| case PHY_INTERFACE_MODE_MII: |
| if (!(ret & MII_ABILITY)) { |
| pr_err("%s: mii mode not supported\n", |
| phydev->drv->name); |
| return -EINVAL; |
| } |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG, |
| MII_BASIC_CONFIG_MII); |
| break; |
| case PHY_INTERFACE_MODE_RMII: |
| if (!(ret & RMII_ABILITY)) { |
| pr_err("%s: rmii mode not supported\n", |
| phydev->drv->name); |
| return -EINVAL; |
| } |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG, |
| MII_BASIC_CONFIG_RMII); |
| break; |
| case PHY_INTERFACE_MODE_SGMII: |
| if (!(ret & SGMII_ABILITY)) { |
| pr_err("%s: sgmii mode not supported\n", |
| phydev->drv->name); |
| return -EINVAL; |
| } |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG, |
| MII_BASIC_CONFIG_SGMII); |
| break; |
| case PHY_INTERFACE_MODE_INTERNAL: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int nxp_c45_config(struct phy_device *phydev) |
| { |
| int ret; |
| |
| ret = nxp_c45_soft_reset(phydev); |
| if (ret) |
| return ret; |
| |
| ret = nxp_c45_config_enable(phydev); |
| if (ret) { |
| pr_err("%s: Failed to enable config\n", phydev->drv->name); |
| return ret; |
| } |
| |
| phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONFIG, |
| PHY_CONFIG_AUTO); |
| |
| ret = nxp_c45_set_phy_mode(phydev); |
| if (ret) { |
| pr_err("%s: Failed to set phy mode\n", phydev->drv->name); |
| return ret; |
| } |
| |
| phydev->autoneg = AUTONEG_DISABLE; |
| |
| return nxp_c45_start_op(phydev); |
| } |
| |
| static int nxp_c45_speed(struct phy_device *phydev) |
| { |
| int val; |
| |
| val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); |
| if (val < 0) |
| return val; |
| |
| if (val & MDIO_PMA_CTRL1_SPEED100) |
| phydev->speed = SPEED_100; |
| else |
| phydev->speed = 0; |
| |
| return 0; |
| } |
| |
| static int nxp_c45_startup(struct phy_device *phydev) |
| { |
| u32 reg; |
| int ret; |
| |
| reg = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT1); |
| phydev->link = !!(reg & MDIO_STAT1_LSTATUS); |
| ret = nxp_c45_speed(phydev); |
| if (ret < 0) |
| return ret; |
| |
| phydev->duplex = DUPLEX_FULL; |
| return 0; |
| } |
| |
| static int nxp_c45_probe(struct phy_device *phydev) |
| { |
| struct nxp_c45_phy *priv; |
| |
| priv = devm_kzalloc(phydev->priv, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| phydev->priv = priv; |
| |
| return 0; |
| } |
| |
| #define NXP_C45_COMMON_FEATURES (SUPPORTED_TP | \ |
| SUPPORTED_MII) |
| |
| U_BOOT_PHY_DRIVER(nxp_c45_tja1103) = { |
| .name = "NXP C45 TJA1103", |
| .uid = PHY_ID_TJA_1103, |
| .mask = 0xfffff0, |
| .features = NXP_C45_COMMON_FEATURES | SUPPORTED_100baseT_Full, |
| .probe = &nxp_c45_probe, |
| .config = &nxp_c45_config, |
| .startup = &nxp_c45_startup, |
| .shutdown = &genphy_shutdown, |
| }; |