blob: 5719e422da978f90c70029aac2e3965c5f5e6796 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Embest/Timll DevKit3250 board configuration file
*
* Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
*/
#ifndef __CONFIG_DEVKIT3250_H__
#define __CONFIG_DEVKIT3250_H__
/* SoC and board defines */
#include <linux/sizes.h>
#include <asm/arch/cpu.h>
/*
* Memory configurations
*/
#define CFG_SYS_SDRAM_BASE EMC_DYCS0_BASE
#define CFG_SYS_SDRAM_SIZE SZ_64M
/*
* DMA
*/
/*
* GPIO
*/
/*
* NOR Flash
*/
#define CFG_SYS_FLASH_BASE EMC_CS0_BASE
#define CFG_SYS_FLASH_SIZE SZ_4M
/*
* NAND controller
*/
#define CFG_SYS_NAND_BASE SLC_NAND_BASE
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
/*
* NAND chip timings
*/
#define CFG_LPC32XX_NAND_SLC_WDR_CLKS 14
#define CONFIG_LPC32XX_NAND_SLC_WWIDTH 66666666
#define CFG_LPC32XX_NAND_SLC_WHOLD 200000000
#define CFG_LPC32XX_NAND_SLC_WSETUP 50000000
#define CFG_LPC32XX_NAND_SLC_RDR_CLKS 14
#define CFG_LPC32XX_NAND_SLC_RWIDTH 66666666
#define CFG_LPC32XX_NAND_SLC_RHOLD 200000000
#define CFG_LPC32XX_NAND_SLC_RSETUP 50000000
/*
* USB
*/
#define CONFIG_USB_ISP1301_I2C_ADDR 0x2d
/*
* U-Boot General Configurations
*/
/*
* Pass open firmware flat tree
*/
/*
* Environment
*/
#define CFG_EXTRA_ENV_SETTINGS \
"ethaddr=00:01:90:00:C0:81\0" \
"dtbaddr=0x81000000\0" \
"nfsroot=/opt/projects/images/vladimir/oe/devkit3250/rootfs\0" \
"tftpdir=vladimir/oe/devkit3250\0" \
"userargs=oops=panic\0"
/*
* U-Boot Commands
*/
/* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_TEXT_BASE */
#define CFG_SYS_NAND_U_BOOT_SIZE 0x60000
#define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
#define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
/* See common/spl/spl.c spl_set_header_raw_uboot() */
/*
* Include SoC specific configuration
*/
#include <asm/arch/config.h>
#endif /* __CONFIG_DEVKIT3250_H__*/