include/configs/ZPC1900.h - filogic/uboot - Gitiles

 /*
  * Copyright (C) 2003 Arabella Software Ltd.
  * Yuli Barcohen <yuli@arabellasw.com>
  *
  * U-Boot configuration for Zephyr Engineering ZPC.1900 board.
  * This port was developed and tested on Revision C board.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU      */
 #define CONFIG_ZPC1900		1	/* ...on Zephyr ZPC.1900 board */
 #define CPU_ID_STR		"MPC8265"

 #undef DEBUG

 #undef CONFIG_BOARD_PRE_INIT		/* Don't call board_pre_init   */

 /* Allow serial number (serial) and MAC address (ethaddr) to be overwritten */
 #define CONFIG_ENV_OVERWRITE

 /*
  * Select serial console configuration
  *
  * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
  * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
  * for SCC).
  */
 #define	CONFIG_CONS_ON_SMC		/* Console is on SMC         */
 #undef  CONFIG_CONS_ON_SCC		/* It's not on SCC           */
 #undef	CONFIG_CONS_NONE		/* It's not on external UART */
 #define CONFIG_CONS_INDEX	1	/* SMC1 is used for console  */

 /*
  * Select ethernet configuration
  *
  * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
  * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
  * SCC, 1-3 for FCC)
  *
  * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
  * must be defined elsewhere (as for the console), or CFG_CMD_NET must
  * be removed from CONFIG_COMMANDS to remove support for networking.
  */
 #undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */
 #define CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */
 #undef	CONFIG_ETHER_NONE		/* No external Ethernet   */

 #ifdef CONFIG_ETHER_ON_FCC

 #define CONFIG_ETHER_INDEX	2	/* FCC2 is used for Ethernet */

 #if (CONFIG_ETHER_INDEX == 2)
 /*
  * - Rx clock is CLK13
  * - Tx clock is CLK14
  * - Select bus for bd/buffers (see 28-13)
  * - Full duplex
  */
 # define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
 # define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
 # define CFG_CPMFCR_RAMTYPE	0
 # define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)

 #endif	/* CONFIG_ETHER_INDEX */

 #define CONFIG_MII			/* MII PHY management        */
 #define CONFIG_BITBANGMII		/* Bit-banged MDIO interface */
 /*
  * GPIO pins used for bit-banged MII communications
  */
 #define MDIO_PORT	2		/* Port C */
 #define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
 #define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
 #define MDIO_READ	((iop->pdat &  0x00400000) != 0)

 #define MDIO(bit)	if(bit) iop->pdat |=  0x00400000; \
 			else	iop->pdat &= ~0x00400000

 #define MDC(bit)	if(bit) iop->pdat |=  0x00200000; \
 			else	iop->pdat &= ~0x00200000

 #define MIIDELAY	udelay(1)

 #endif /* CONFIG_ETHER_ON_FCC */

 #ifndef CONFIG_8260_CLKIN
 #define CONFIG_8260_CLKIN	66666666	/* in Hz */
 #endif

 #define CONFIG_BAUDRATE		9600

 #define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
 				 CFG_CMD_BEDBUG | \
 				 CFG_CMD_BMP	| \
 				 CFG_CMD_BSP	| \
 				 CFG_CMD_DATE	| \
 				 CFG_CMD_DOC	| \
 				 CFG_CMD_DTT	| \
 				 CFG_CMD_EEPROM | \
 				 CFG_CMD_ELF    | \
 				 CFG_CMD_FAT    | \
 				 CFG_CMD_FDC	| \
 				 CFG_CMD_FDOS	| \
 				 CFG_CMD_HWFLOW	| \
 				 CFG_CMD_I2C	| \
 				 CFG_CMD_IDE	| \
 				 CFG_CMD_JFFS2	| \
 				 CFG_CMD_KGDB	| \
 				 CFG_CMD_MMC	| \
 				 CFG_CMD_NAND	| \
 				 CFG_CMD_PCI	| \
 				 CFG_CMD_PCMCIA | \
 				 CFG_CMD_SCSI	| \
 				 CFG_CMD_SPI	| \
 				 CFG_CMD_USB	| \
 				 CFG_CMD_VFD    ) )

 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>

 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 #define CONFIG_BOOTCOMMAND	"dhcp;bootm"	/* autoboot command */
 #define CONFIG_BOOTARGS		"root=/dev/nfs rw ip=:::::eth0:dhcp"

 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
 #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
 #define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
 #endif

 #define CONFIG_BZIP2	/* include support for bzip2 compressed images */
 #undef	CONFIG_WATCHDOG	/* disable platform specific watchdog */

 /*
  * Miscellaneous configurable options
  */
 #define CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2 "> "
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt   */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE	256			/* Console I/O Buffer Size  */
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size  */
 #define CFG_MAXARGS		16		/* max number of command args */
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size  */

 #define CFG_MEMTEST_START	0x00100000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/

 #define CFG_LOAD_ADDR		0x100000	/* default load address */

 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */

 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }

 #define CFG_FLASH_BASE		0xFFE00000
 #define CFG_FLASH_CFI
 #define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
 #define CFG_MAX_FLASH_SECT	32	/* max num of sects on one chip */

 #define CFG_DEFAULT_IMMR	0x0F010000

 #define CFG_IMMR		0xF0000000
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_SDRAM_SIZE		64
 #define CFG_FLSIMM_BASE		0xFC000000
 #define CFG_LSDRAM_BASE		0xFE000000
 #define CFG_BCSR		0xFEA00000
 #define CFG_EEPROM		0xFEB00000

 #define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }

 #define BCSR_PCI_MODE		0x01

 #define CFG_INIT_RAM_ADDR	CFG_IMMR
 #define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

 /* Hard reset configuration word */
 #define CFG_HRCW_MASTER		(HRCW_EBM | HRCW_BPS01                    |\
 				 HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB010 |\
 				 HRCW_APPC10                              |\
 				 HRCW_MODCK_H0101                          \
 				) /* 0x14820205 */
 /* No slaves */
 #define CFG_HRCW_SLAVE1 	0
 #define CFG_HRCW_SLAVE2 	0
 #define CFG_HRCW_SLAVE3 	0
 #define CFG_HRCW_SLAVE4 	0
 #define CFG_HRCW_SLAVE5 	0
 #define CFG_HRCW_SLAVE6 	0
 #define CFG_HRCW_SLAVE7 	0

 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM		0x02	/* Software reboot                  */

 #define CFG_MONITOR_BASE	TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #define CFG_RAMBOOT
 #endif

 #define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

 #if !defined(CFG_ENV_IS_IN_FLASH) && !defined(CFG_ENV_IS_IN_NVRAM)
 #define CFG_ENV_IS_IN_NVRAM	1
 #endif

 #ifdef CFG_ENV_IS_IN_FLASH
 #  define CFG_ENV_SECT_SIZE	0x10000
 #  define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE)
 #else
 #  define CFG_ENV_ADDR		(CFG_EEPROM + 0x400)
 #  define CFG_ENV_SIZE		0x200
 #  define CFG_NVRAM_ACCESS_ROUTINE
 #endif

 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif

 #define CFG_HID0_INIT		0
 #define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )

 #define CFG_HID2		0

 #define CFG_SIUMCR		0x42200000
 #define CFG_SYPCR		0xFFFFFFC3
 #define CFG_BCR			0x90400000
 #define CFG_SCCR		SCCR_DFBRG01

 #define CFG_RMR			RMR_CSRE
 #define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
 #define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
 #define CFG_RCCR		0

 #define CFG_PSDMR		0x014EB45A
 #define CFG_PSRT		0x0C
 #define CFG_LSDMR		0x008AB552
 #define CFG_LSRT		0x0E
 #define CFG_MPTPR		0x4000

 #define CFG_BR0_PRELIM		CFG_FLASH_BASE | 0x00000801
 #define CFG_OR0_PRELIM		0xFFE00856
 #define CFG_BR5_PRELIM		CFG_EEPROM | 0x00000801
 #define CFG_OR5_PRELIM		0xFFFF03F6
 #define CFG_BR6_PRELIM		CFG_FLSIMM_BASE | 0x00000801
 #define CFG_OR6_PRELIM		0xFE000856
 #define CFG_BR7_PRELIM		CFG_BCSR | 0x00000801
 #define CFG_OR7_PRELIM		0xFFFF83F6

 #define CFG_RESET_ADDRESS	0xC0000000

 #endif /* __CONFIG_H */
	/*
	* Copyright (C) 2003 Arabella Software Ltd.
	* Yuli Barcohen <yuli@arabellasw.com>
	*
	* U-Boot configuration for Zephyr Engineering ZPC.1900 board.
	* This port was developed and tested on Revision C board.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
	#define CONFIG_ZPC1900 1 /* ...on Zephyr ZPC.1900 board */
	#define CPU_ID_STR "MPC8265"

	#undef DEBUG

	#undef CONFIG_BOARD_PRE_INIT /* Don't call board_pre_init */

	/* Allow serial number (serial) and MAC address (ethaddr) to be overwritten */
	#define CONFIG_ENV_OVERWRITE

	/*
	* Select serial console configuration
	*
	* If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
	* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
	* for SCC).
	*/
	#define CONFIG_CONS_ON_SMC /* Console is on SMC */
	#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
	#undef CONFIG_CONS_NONE /* It's not on external UART */
	#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */

	/*
	* Select ethernet configuration
	*
	* If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
	* then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
	* SCC, 1-3 for FCC)
	*
	* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
	* must be defined elsewhere (as for the console), or CFG_CMD_NET must
	* be removed from CONFIG_COMMANDS to remove support for networking.
	*/
	#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
	#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
	#undef CONFIG_ETHER_NONE /* No external Ethernet */

	#ifdef CONFIG_ETHER_ON_FCC

	#define CONFIG_ETHER_INDEX 2 /* FCC2 is used for Ethernet */

	#if (CONFIG_ETHER_INDEX == 2)
	/*
	* - Rx clock is CLK13
	* - Tx clock is CLK14
	* - Select bus for bd/buffers (see 28-13)
	* - Full duplex
	*/
	# define CFG_CMXFCR_MASK (CMXFCR_FC2 \| CMXFCR_RF2CS_MSK \| CMXFCR_TF2CS_MSK)
	# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 \| CMXFCR_TF2CS_CLK14)
	# define CFG_CPMFCR_RAMTYPE 0
	# define CFG_FCC_PSMR (FCC_PSMR_FDE \| FCC_PSMR_LPB)

	#endif /* CONFIG_ETHER_INDEX */

	#define CONFIG_MII /* MII PHY management */
	#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */
	/*
	* GPIO pins used for bit-banged MII communications
	*/
	#define MDIO_PORT 2 /* Port C */
	#define MDIO_ACTIVE (iop->pdir \|= 0x00400000)
	#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
	#define MDIO_READ ((iop->pdat & 0x00400000) != 0)

	#define MDIO(bit) if(bit) iop->pdat \|= 0x00400000; \
	else iop->pdat &= ~0x00400000

	#define MDC(bit) if(bit) iop->pdat \|= 0x00200000; \
	else iop->pdat &= ~0x00200000

	#define MIIDELAY udelay(1)

	#endif /* CONFIG_ETHER_ON_FCC */

	#ifndef CONFIG_8260_CLKIN
	#define CONFIG_8260_CLKIN 66666666 /* in Hz */
	#endif

	#define CONFIG_BAUDRATE 9600

	#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
	CFG_CMD_BEDBUG \| \
	CFG_CMD_BMP \| \
	CFG_CMD_BSP \| \
	CFG_CMD_DATE \| \
	CFG_CMD_DOC \| \
	CFG_CMD_DTT \| \
	CFG_CMD_EEPROM \| \
	CFG_CMD_ELF \| \
	CFG_CMD_FAT \| \
	CFG_CMD_FDC \| \
	CFG_CMD_FDOS \| \
	CFG_CMD_HWFLOW \| \
	CFG_CMD_I2C \| \
	CFG_CMD_IDE \| \
	CFG_CMD_JFFS2 \| \
	CFG_CMD_KGDB \| \
	CFG_CMD_MMC \| \
	CFG_CMD_NAND \| \
	CFG_CMD_PCI \| \
	CFG_CMD_PCMCIA \| \
	CFG_CMD_SCSI \| \
	CFG_CMD_SPI \| \
	CFG_CMD_USB \| \
	CFG_CMD_VFD ) )

	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	#include <cmd_confdefs.h>

	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	#define CONFIG_BOOTCOMMAND "dhcp;bootm" /* autoboot command */
	#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=:::::eth0:dhcp"

	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
	#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
	#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
	#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
	#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
	#endif

	#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
	#undef CONFIG_WATCHDOG /* disable platform specific watchdog */

	/*
	* Miscellaneous configurable options
	*/
	#define CFG_HUSH_PARSER
	#define CFG_PROMPT_HUSH_PS2 "> "
	#define CFG_LONGHELP /* undef to save memory */
	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	#define CFG_MAXARGS 16 /* max number of command args */
	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */

	#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
	#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */

	#define CFG_LOAD_ADDR 0x100000 /* default load address */

	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */

	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

	#define CFG_FLASH_BASE 0xFFE00000
	#define CFG_FLASH_CFI
	#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
	#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */

	#define CFG_DEFAULT_IMMR 0x0F010000

	#define CFG_IMMR 0xF0000000
	#define CFG_SDRAM_BASE 0x00000000
	#define CFG_SDRAM_SIZE 64
	#define CFG_FLSIMM_BASE 0xFC000000
	#define CFG_LSDRAM_BASE 0xFE000000
	#define CFG_BCSR 0xFEA00000
	#define CFG_EEPROM 0xFEB00000

	#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }

	#define BCSR_PCI_MODE 0x01

	#define CFG_INIT_RAM_ADDR CFG_IMMR
	#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET

	/* Hard reset configuration word */
	#define CFG_HRCW_MASTER (HRCW_EBM \| HRCW_BPS01 \|\
	HRCW_L2CPC10 \| HRCW_DPPC00 \| HRCW_ISB010 \|\
	HRCW_APPC10 \|\
	HRCW_MODCK_H0101 \
	) /* 0x14820205 */
	/* No slaves */
	#define CFG_HRCW_SLAVE1 0
	#define CFG_HRCW_SLAVE2 0
	#define CFG_HRCW_SLAVE3 0
	#define CFG_HRCW_SLAVE4 0
	#define CFG_HRCW_SLAVE5 0
	#define CFG_HRCW_SLAVE6 0
	#define CFG_HRCW_SLAVE7 0

	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#define CFG_MONITOR_BASE TEXT_BASE
	#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
	#define CFG_RAMBOOT
	#endif

	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	#if !defined(CFG_ENV_IS_IN_FLASH) && !defined(CFG_ENV_IS_IN_NVRAM)
	#define CFG_ENV_IS_IN_NVRAM 1
	#endif

	#ifdef CFG_ENV_IS_IN_FLASH
	# define CFG_ENV_SECT_SIZE 0x10000
	# define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE)
	#else
	# define CFG_ENV_ADDR (CFG_EEPROM + 0x400)
	# define CFG_ENV_SIZE 0x200
	# define CFG_NVRAM_ACCESS_ROUTINE
	#endif

	#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
	# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	#endif

	#define CFG_HID0_INIT 0
	#define CFG_HID0_FINAL (HID0_ICE \| HID0_IFEM \| HID0_ABE )

	#define CFG_HID2 0

	#define CFG_SIUMCR 0x42200000
	#define CFG_SYPCR 0xFFFFFFC3
	#define CFG_BCR 0x90400000
	#define CFG_SCCR SCCR_DFBRG01

	#define CFG_RMR RMR_CSRE
	#define CFG_TMCNTSC (TMCNTSC_SEC\|TMCNTSC_ALR\|TMCNTSC_TCF\|TMCNTSC_TCE)
	#define CFG_PISCR (PISCR_PS\|PISCR_PTF\|PISCR_PTE)
	#define CFG_RCCR 0

	#define CFG_PSDMR 0x014EB45A
	#define CFG_PSRT 0x0C
	#define CFG_LSDMR 0x008AB552
	#define CFG_LSRT 0x0E
	#define CFG_MPTPR 0x4000

	#define CFG_BR0_PRELIM CFG_FLASH_BASE \| 0x00000801
	#define CFG_OR0_PRELIM 0xFFE00856
	#define CFG_BR5_PRELIM CFG_EEPROM \| 0x00000801
	#define CFG_OR5_PRELIM 0xFFFF03F6
	#define CFG_BR6_PRELIM CFG_FLSIMM_BASE \| 0x00000801
	#define CFG_OR6_PRELIM 0xFE000856
	#define CFG_BR7_PRELIM CFG_BCSR \| 0x00000801
	#define CFG_OR7_PRELIM 0xFFFF83F6

	#define CFG_RESET_ADDRESS 0xC0000000

	#endif /* __CONFIG_H */