| /* |
| * (C) Copyright 2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/inca-ip.h> |
| |
| flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ |
| |
| typedef unsigned long FLASH_PORT_WIDTH; |
| typedef volatile unsigned long FLASH_PORT_WIDTHV; |
| |
| #define FLASH_ID_MASK 0xFFFFFFFF |
| |
| #define FPW FLASH_PORT_WIDTH |
| #define FPWV FLASH_PORT_WIDTHV |
| |
| #define ORMASK(size) ((-size) & OR_AM_MSK) |
| |
| #define FLASH29_REG_ADRS(reg) ((FPWV *)PHYS_FLASH_1 + (reg)) |
| |
| /* FLASH29 command register addresses */ |
| |
| #define FLASH29_REG_FIRST_CYCLE FLASH29_REG_ADRS (0x1555) |
| #define FLASH29_REG_SECOND_CYCLE FLASH29_REG_ADRS (0x2aaa) |
| #define FLASH29_REG_THIRD_CYCLE FLASH29_REG_ADRS (0x3555) |
| #define FLASH29_REG_FOURTH_CYCLE FLASH29_REG_ADRS (0x4555) |
| #define FLASH29_REG_FIFTH_CYCLE FLASH29_REG_ADRS (0x5aaa) |
| #define FLASH29_REG_SIXTH_CYCLE FLASH29_REG_ADRS (0x6555) |
| |
| /* FLASH29 command definitions */ |
| |
| #define FLASH29_CMD_FIRST 0xaaaaaaaa |
| #define FLASH29_CMD_SECOND 0x55555555 |
| #define FLASH29_CMD_FOURTH 0xaaaaaaaa |
| #define FLASH29_CMD_FIFTH 0x55555555 |
| #define FLASH29_CMD_SIXTH 0x10101010 |
| |
| #define FLASH29_CMD_SECTOR 0x30303030 |
| #define FLASH29_CMD_PROGRAM 0xa0a0a0a0 |
| #define FLASH29_CMD_CHIP_ERASE 0x80808080 |
| #define FLASH29_CMD_READ_RESET 0xf0f0f0f0 |
| #define FLASH29_CMD_AUTOSELECT 0x90909090 |
| #define FLASH29_CMD_READ 0x70707070 |
| |
| #define IN_RAM_CMD_READ 0x1 |
| #define IN_RAM_CMD_WRITE 0x2 |
| |
| #define FLASH_WRITE_CMD ((ulong)(flash_write_cmd) & 0x7)+0xbf008000 |
| #define FLASH_READ_CMD ((ulong)(flash_read_cmd) & 0x7)+0xbf008000 |
| |
| typedef void (*FUNCPTR_CP)(ulong *source, ulong *destination, ulong nlongs); |
| typedef void (*FUNCPTR_RD)(int cmd, FPWV * pFA, char * string, int strLen); |
| typedef void (*FUNCPTR_WR)(int cmd, FPWV * pFA, FPW value); |
| |
| static ulong flash_get_size(FPWV *addr, flash_info_t *info); |
| static int write_word(flash_info_t *info, FPWV *dest, FPW data); |
| static void flash_get_offsets(ulong base, flash_info_t *info); |
| static flash_info_t *flash_get_info(ulong base); |
| |
| static void load_cmd(ulong cmd); |
| static ulong in_ram_cmd = 0; |
| |
| |
| /****************************************************************************** |
| * |
| * Don't change the program architecture |
| * This architecture assure the program |
| * can be relocated to scratch ram |
| */ |
| static void flash_read_cmd(int cmd, FPWV * pFA, char * string, int strLen) |
| { |
| int i,j; |
| FPW temp,temp1; |
| FPWV *str; |
| |
| str = (FPWV *)string; |
| |
| j= strLen/4; |
| |
| if(cmd == FLASH29_CMD_AUTOSELECT) |
| { |
| *(FLASH29_REG_FIRST_CYCLE) = FLASH29_CMD_FIRST; |
| *(FLASH29_REG_SECOND_CYCLE) = FLASH29_CMD_SECOND; |
| *(FLASH29_REG_THIRD_CYCLE) = FLASH29_CMD_AUTOSELECT; |
| } |
| |
| if(cmd == FLASH29_CMD_READ) |
| { |
| i = 0; |
| while(i<j) |
| { |
| temp = *pFA++; |
| temp1 = *(int *)0xa0000000; |
| *(int *)0xbf0081f8 = temp1 + temp; |
| *str++ = temp; |
| i++; |
| } |
| } |
| |
| if(cmd == FLASH29_CMD_READ_RESET) |
| { |
| *(FLASH29_REG_FIRST_CYCLE) = FLASH29_CMD_FIRST; |
| *(FLASH29_REG_SECOND_CYCLE) = FLASH29_CMD_SECOND; |
| *(FLASH29_REG_THIRD_CYCLE) = FLASH29_CMD_READ_RESET; |
| } |
| |
| *(int *)0xbf0081f8 = *(int *)0xa0000000; /* dummy read switch back to sdram interface */ |
| } |
| |
| /****************************************************************************** |
| * |
| * Don't change the program architecture |
| * This architecture assure the program |
| * can be relocated to scratch ram |
| */ |
| static void flash_write_cmd(int cmd, FPWV * pFA, FPW value) |
| { |
| *(FLASH29_REG_FIRST_CYCLE) = FLASH29_CMD_FIRST; |
| *(FLASH29_REG_SECOND_CYCLE) = FLASH29_CMD_SECOND; |
| |
| if (cmd == FLASH29_CMD_SECTOR) |
| { |
| *(FLASH29_REG_THIRD_CYCLE) = FLASH29_CMD_CHIP_ERASE; |
| *(FLASH29_REG_FOURTH_CYCLE) = FLASH29_CMD_FOURTH; |
| *(FLASH29_REG_FIFTH_CYCLE) = FLASH29_CMD_FIFTH; |
| *pFA = FLASH29_CMD_SECTOR; |
| } |
| |
| if (cmd == FLASH29_CMD_SIXTH) |
| { |
| *(FLASH29_REG_THIRD_CYCLE) = FLASH29_CMD_CHIP_ERASE; |
| *(FLASH29_REG_FOURTH_CYCLE) = FLASH29_CMD_FOURTH; |
| *(FLASH29_REG_FIFTH_CYCLE) = FLASH29_CMD_FIFTH; |
| *(FLASH29_REG_SIXTH_CYCLE) = FLASH29_CMD_SIXTH; |
| } |
| |
| if (cmd == FLASH29_CMD_PROGRAM) |
| { |
| *(FLASH29_REG_THIRD_CYCLE) = FLASH29_CMD_PROGRAM; |
| *pFA = value; |
| } |
| |
| if (cmd == FLASH29_CMD_READ_RESET) |
| { |
| *(FLASH29_REG_THIRD_CYCLE) = FLASH29_CMD_READ_RESET; |
| } |
| |
| *(int *)0xbf0081f8 = *(int *)0xa0000000; /* dummy read switch back to sdram interface */ |
| } |
| |
| static void load_cmd(ulong cmd) |
| { |
| ulong *src; |
| ulong *dst; |
| FUNCPTR_CP absEntry; |
| ulong func; |
| |
| if (in_ram_cmd & cmd) return; |
| |
| if (cmd == IN_RAM_CMD_READ) |
| { |
| func = (ulong)flash_read_cmd; |
| } |
| else |
| { |
| func = (ulong)flash_write_cmd; |
| } |
| |
| src = (ulong *)(func & 0xfffffff8); |
| dst = (ulong *)0xbf008000; |
| absEntry = (FUNCPTR_CP)(0xbf0081d0); |
| absEntry(src,dst,0x38); |
| |
| in_ram_cmd = cmd; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * flash_init() |
| * |
| * sets up flash_info and returns size of FLASH (bytes) |
| */ |
| unsigned long flash_init (void) |
| { |
| unsigned long size = 0; |
| int i; |
| |
| load_cmd(IN_RAM_CMD_READ); |
| |
| /* Init: no FLASHes known */ |
| for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) { |
| ulong flashbase = PHYS_FLASH_1; |
| ulong * buscon = (ulong *) INCA_IP_EBU_EBU_BUSCON0; |
| |
| /* Disable write protection */ |
| *buscon &= ~INCA_IP_EBU_EBU_BUSCON1_WRDIS; |
| |
| #if 1 |
| memset(&flash_info[i], 0, sizeof(flash_info_t)); |
| #endif |
| |
| flash_info[i].size = |
| flash_get_size((FPW *)flashbase, &flash_info[i]); |
| |
| if (flash_info[i].flash_id == FLASH_UNKNOWN) { |
| printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx\n", |
| i, flash_info[i].size); |
| } |
| |
| size += flash_info[i].size; |
| } |
| |
| #if CFG_MONITOR_BASE >= CFG_FLASH_BASE |
| /* monitor protection ON by default */ |
| flash_protect(FLAG_PROTECT_SET, |
| CFG_MONITOR_BASE, |
| CFG_MONITOR_BASE+monitor_flash_len-1, |
| flash_get_info(CFG_MONITOR_BASE)); |
| #endif |
| |
| #ifdef CONFIG_ENV_IS_IN_FLASH |
| /* ENV protection ON by default */ |
| flash_protect(FLAG_PROTECT_SET, |
| CONFIG_ENV_ADDR, |
| CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1, |
| flash_get_info(CONFIG_ENV_ADDR)); |
| #endif |
| |
| return size; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| static void flash_get_offsets (ulong base, flash_info_t *info) |
| { |
| int i; |
| |
| if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD |
| && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM160B) { |
| |
| int bootsect_size[4]; /* number of bytes/boot sector */ |
| int sect_size; /* number of bytes/regular sector */ |
| |
| bootsect_size[0] = 0x00008000; |
| bootsect_size[1] = 0x00004000; |
| bootsect_size[2] = 0x00004000; |
| bootsect_size[3] = 0x00010000; |
| sect_size = 0x00020000; |
| |
| /* set sector offsets for bottom boot block type */ |
| for (i = 0; i < info->sector_count; i++) { |
| info->start[i] = base; |
| base += i < 4 ? bootsect_size[i] : sect_size; |
| } |
| } |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| static flash_info_t *flash_get_info(ulong base) |
| { |
| int i; |
| flash_info_t * info; |
| |
| for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) { |
| info = & flash_info[i]; |
| if (info->start[0] <= base && base < info->start[0] + info->size) |
| break; |
| } |
| |
| return i == CFG_MAX_FLASH_BANKS ? 0 : info; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| void flash_print_info (flash_info_t *info) |
| { |
| int i; |
| uchar *boottype; |
| uchar *bootletter; |
| char *fmt; |
| uchar botbootletter[] = "B"; |
| uchar topbootletter[] = "T"; |
| uchar botboottype[] = "bottom boot sector"; |
| uchar topboottype[] = "top boot sector"; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("missing or unknown FLASH type\n"); |
| return; |
| } |
| |
| switch (info->flash_id & FLASH_VENDMASK) { |
| case FLASH_MAN_AMD: printf ("AMD "); break; |
| case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; |
| case FLASH_MAN_FUJ: printf ("FUJITSU "); break; |
| case FLASH_MAN_SST: printf ("SST "); break; |
| case FLASH_MAN_STM: printf ("STM "); break; |
| case FLASH_MAN_INTEL: printf ("INTEL "); break; |
| default: printf ("Unknown Vendor "); break; |
| } |
| |
| /* check for top or bottom boot, if it applies */ |
| if (info->flash_id & FLASH_BTYPE) { |
| boottype = botboottype; |
| bootletter = botbootletter; |
| } |
| else { |
| boottype = topboottype; |
| bootletter = topbootletter; |
| } |
| |
| switch (info->flash_id & FLASH_TYPEMASK) { |
| case FLASH_AM160B: |
| fmt = "29LV160B%s (16 Mbit, %s)\n"; |
| break; |
| case FLASH_28F800C3B: |
| case FLASH_28F800C3T: |
| fmt = "28F800C3%s (8 Mbit, %s)\n"; |
| break; |
| case FLASH_INTEL800B: |
| case FLASH_INTEL800T: |
| fmt = "28F800B3%s (8 Mbit, %s)\n"; |
| break; |
| case FLASH_28F160C3B: |
| case FLASH_28F160C3T: |
| fmt = "28F160C3%s (16 Mbit, %s)\n"; |
| break; |
| case FLASH_INTEL160B: |
| case FLASH_INTEL160T: |
| fmt = "28F160B3%s (16 Mbit, %s)\n"; |
| break; |
| case FLASH_28F320C3B: |
| case FLASH_28F320C3T: |
| fmt = "28F320C3%s (32 Mbit, %s)\n"; |
| break; |
| case FLASH_INTEL320B: |
| case FLASH_INTEL320T: |
| fmt = "28F320B3%s (32 Mbit, %s)\n"; |
| break; |
| case FLASH_28F640C3B: |
| case FLASH_28F640C3T: |
| fmt = "28F640C3%s (64 Mbit, %s)\n"; |
| break; |
| case FLASH_INTEL640B: |
| case FLASH_INTEL640T: |
| fmt = "28F640B3%s (64 Mbit, %s)\n"; |
| break; |
| default: |
| fmt = "Unknown Chip Type\n"; |
| break; |
| } |
| |
| printf (fmt, bootletter, boottype); |
| |
| printf (" Size: %ld MB in %d Sectors\n", |
| info->size >> 20, |
| info->sector_count); |
| |
| printf (" Sector Start Addresses:"); |
| |
| for (i=0; i<info->sector_count; ++i) { |
| if ((i % 5) == 0) { |
| printf ("\n "); |
| } |
| |
| printf (" %08lX%s", info->start[i], |
| info->protect[i] ? " (RO)" : " "); |
| } |
| |
| printf ("\n"); |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| /* |
| * The following code cannot be run from FLASH! |
| */ |
| |
| ulong flash_get_size (FPWV *addr, flash_info_t *info) |
| { |
| FUNCPTR_RD absEntry; |
| FPW retValue; |
| int flag; |
| |
| load_cmd(IN_RAM_CMD_READ); |
| absEntry = (FUNCPTR_RD)FLASH_READ_CMD; |
| |
| flag = disable_interrupts(); |
| absEntry(FLASH29_CMD_AUTOSELECT,0,0,0); |
| if (flag) enable_interrupts(); |
| |
| udelay(100); |
| |
| flag = disable_interrupts(); |
| absEntry(FLASH29_CMD_READ, addr + 1, (char *)&retValue, sizeof(retValue)); |
| absEntry(FLASH29_CMD_READ_RESET,0,0,0); |
| if (flag) enable_interrupts(); |
| |
| udelay(100); |
| |
| switch (retValue) { |
| |
| case (FPW)AMD_ID_LV160B: |
| info->flash_id += FLASH_AM160B; |
| info->sector_count = 35; |
| info->size = 0x00400000; |
| break; /* => 8 or 16 MB */ |
| |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| info->sector_count = 0; |
| info->size = 0; |
| return (0); /* => no or unknown flash */ |
| } |
| |
| flash_get_offsets((ulong)addr, info); |
| |
| return (info->size); |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| int flash_erase (flash_info_t *info, int s_first, int s_last) |
| { |
| FPWV *addr; |
| int flag, prot, sect; |
| ulong start, now, last; |
| int rcode = 0; |
| FUNCPTR_WR absEntry; |
| |
| load_cmd(IN_RAM_CMD_WRITE); |
| absEntry = (FUNCPTR_WR)FLASH_WRITE_CMD; |
| |
| if ((s_first < 0) || (s_first > s_last)) { |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("- missing\n"); |
| } else { |
| printf ("- no sectors to erase\n"); |
| } |
| return 1; |
| } |
| |
| switch (info->flash_id & FLASH_TYPEMASK) { |
| case FLASH_AM160B: |
| break; |
| case FLASH_UNKNOWN: |
| default: |
| printf ("Can't erase unknown flash type %08lx - aborted\n", |
| info->flash_id); |
| return 1; |
| } |
| |
| prot = 0; |
| for (sect=s_first; sect<=s_last; ++sect) { |
| if (info->protect[sect]) { |
| prot++; |
| } |
| } |
| |
| if (prot) { |
| printf ("- Warning: %d protected sectors will not be erased!\n", |
| prot); |
| } else { |
| printf ("\n"); |
| } |
| |
| last = get_timer(0); |
| |
| /* Start erase on unprotected sectors */ |
| for (sect = s_first; sect<=s_last && rcode == 0; sect++) { |
| |
| if (info->protect[sect] != 0) /* protected, skip it */ |
| continue; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| addr = (FPWV *)(info->start[sect]); |
| absEntry(FLASH29_CMD_SECTOR, addr, 0); |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| start = get_timer(0); |
| |
| while ((now = get_timer(start)) <= CFG_FLASH_ERASE_TOUT) { |
| |
| /* show that we're waiting */ |
| if ((get_timer(last)) > CFG_HZ) {/* every second */ |
| putc ('.'); |
| last = get_timer(0); |
| } |
| } |
| |
| flag = disable_interrupts(); |
| absEntry(FLASH29_CMD_READ_RESET,0,0); |
| if (flag) |
| enable_interrupts(); |
| } |
| |
| printf (" done\n"); |
| return rcode; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Copy memory to flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) |
| { |
| FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */ |
| int bytes; /* number of bytes to program in current word */ |
| int left; /* number of bytes left to program */ |
| int i, res; |
| |
| for (left = cnt, res = 0; |
| left > 0 && res == 0; |
| addr += sizeof(data), left -= sizeof(data) - bytes) { |
| |
| bytes = addr & (sizeof(data) - 1); |
| addr &= ~(sizeof(data) - 1); |
| |
| /* combine source and destination data so can program |
| * an entire word of 16 or 32 bits |
| */ |
| for (i = 0; i < sizeof(data); i++) { |
| data <<= 8; |
| if (i < bytes || i - bytes >= left ) |
| data += *((uchar *)addr + i); |
| else |
| data += *src++; |
| } |
| |
| res = write_word(info, (FPWV *)addr, data); |
| } |
| |
| return (res); |
| } |
| |
| static int write_word (flash_info_t *info, FPWV *dest, FPW data) |
| { |
| int res = 0; /* result, assume success */ |
| FUNCPTR_WR absEntry; |
| int flag; |
| |
| /* Check if Flash is (sufficiently) erased */ |
| if ((*dest & data) != data) { |
| return (2); |
| } |
| |
| if (info->start[0] != PHYS_FLASH_1) |
| { |
| return (3); |
| } |
| |
| load_cmd(IN_RAM_CMD_WRITE); |
| absEntry = (FUNCPTR_WR)FLASH_WRITE_CMD; |
| |
| flag = disable_interrupts(); |
| absEntry(FLASH29_CMD_PROGRAM,dest,data); |
| if (flag) enable_interrupts(); |
| |
| udelay(100); |
| |
| flag = disable_interrupts(); |
| absEntry(FLASH29_CMD_READ_RESET,0,0); |
| if (flag) enable_interrupts(); |
| |
| return (res); |
| } |