| # |
| # (C) Copyright 2000-2008 |
| # Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| # |
| # See file CREDITS for list of people who contributed to this |
| # project. |
| # |
| # This program is free software; you can redistribute it and/or |
| # modify it under the terms of the GNU General Public License as |
| # published by the Free Software Foundatio; either version 2 of |
| # the License, or (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| # MA 02111-1307 USA |
| # |
| |
| VERSION = 2009 |
| PATCHLEVEL = 01 |
| SUBLEVEL = |
| EXTRAVERSION = |
| ifneq "$(SUBLEVEL)" "" |
| U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) |
| else |
| U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION) |
| endif |
| TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h |
| VERSION_FILE = $(obj)include/version_autogenerated.h |
| |
| HOSTARCH := $(shell uname -m | \ |
| sed -e s/i.86/i386/ \ |
| -e s/sun4u/sparc64/ \ |
| -e s/arm.*/arm/ \ |
| -e s/sa110/arm/ \ |
| -e s/powerpc/ppc/ \ |
| -e s/ppc64/ppc/ \ |
| -e s/macppc/ppc/) |
| |
| HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ |
| sed -e 's/\(cygwin\).*/cygwin/') |
| |
| # Set shell to bash if possible, otherwise fall back to sh |
| SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ |
| else if [ -x /bin/bash ]; then echo /bin/bash; \ |
| else echo sh; fi; fi) |
| |
| export HOSTARCH HOSTOS SHELL |
| |
| # Deal with colliding definitions from tcsh etc. |
| VENDOR= |
| |
| ######################################################################### |
| # Allow for silent builds |
| ifeq (,$(findstring s,$(MAKEFLAGS))) |
| XECHO = echo |
| else |
| XECHO = : |
| endif |
| |
| ######################################################################### |
| # |
| # U-boot build supports producing a object files to the separate external |
| # directory. Two use cases are supported: |
| # |
| # 1) Add O= to the make command line |
| # 'make O=/tmp/build all' |
| # |
| # 2) Set environement variable BUILD_DIR to point to the desired location |
| # 'export BUILD_DIR=/tmp/build' |
| # 'make' |
| # |
| # The second approach can also be used with a MAKEALL script |
| # 'export BUILD_DIR=/tmp/build' |
| # './MAKEALL' |
| # |
| # Command line 'O=' setting overrides BUILD_DIR environent variable. |
| # |
| # When none of the above methods is used the local build is performed and |
| # the object files are placed in the source directory. |
| # |
| |
| ifdef O |
| ifeq ("$(origin O)", "command line") |
| BUILD_DIR := $(O) |
| endif |
| endif |
| |
| ifneq ($(BUILD_DIR),) |
| saved-output := $(BUILD_DIR) |
| |
| # Attempt to create a output directory. |
| $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) |
| |
| # Verify if it was successful. |
| BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) |
| $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) |
| endif # ifneq ($(BUILD_DIR),) |
| |
| OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) |
| SRCTREE := $(CURDIR) |
| TOPDIR := $(SRCTREE) |
| LNDIR := $(OBJTREE) |
| export TOPDIR SRCTREE OBJTREE |
| |
| MKCONFIG := $(SRCTREE)/mkconfig |
| export MKCONFIG |
| |
| ifneq ($(OBJTREE),$(SRCTREE)) |
| REMOTE_BUILD := 1 |
| export REMOTE_BUILD |
| endif |
| |
| # $(obj) and (src) are defined in config.mk but here in main Makefile |
| # we also need them before config.mk is included which is the case for |
| # some targets like unconfig, clean, clobber, distclean, etc. |
| ifneq ($(OBJTREE),$(SRCTREE)) |
| obj := $(OBJTREE)/ |
| src := $(SRCTREE)/ |
| else |
| obj := |
| src := |
| endif |
| export obj src |
| |
| # Make sure CDPATH settings don't interfere |
| unexport CDPATH |
| |
| ######################################################################### |
| |
| ifeq ($(ARCH),powerpc) |
| ARCH = ppc |
| endif |
| |
| ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) |
| |
| # load ARCH, BOARD, and CPU configuration |
| include $(obj)include/config.mk |
| export ARCH CPU BOARD VENDOR SOC |
| |
| ifndef CROSS_COMPILE |
| ifeq ($(HOSTARCH),$(ARCH)) |
| CROSS_COMPILE = |
| else |
| ifeq ($(ARCH),ppc) |
| CROSS_COMPILE = ppc_8xx- |
| endif |
| ifeq ($(ARCH),arm) |
| CROSS_COMPILE = arm-linux- |
| endif |
| ifeq ($(ARCH),i386) |
| CROSS_COMPILE = i386-linux- |
| endif |
| ifeq ($(ARCH),mips) |
| CROSS_COMPILE = mips_4KC- |
| endif |
| ifeq ($(ARCH),nios) |
| CROSS_COMPILE = nios-elf- |
| endif |
| ifeq ($(ARCH),nios2) |
| CROSS_COMPILE = nios2-elf- |
| endif |
| ifeq ($(ARCH),m68k) |
| CROSS_COMPILE = m68k-elf- |
| endif |
| ifeq ($(ARCH),microblaze) |
| CROSS_COMPILE = mb- |
| endif |
| ifeq ($(ARCH),blackfin) |
| CROSS_COMPILE = bfin-uclinux- |
| endif |
| ifeq ($(ARCH),avr32) |
| CROSS_COMPILE = avr32-linux- |
| endif |
| ifeq ($(ARCH),sh) |
| CROSS_COMPILE = sh4-linux- |
| endif |
| ifeq ($(ARCH),sparc) |
| CROSS_COMPILE = sparc-elf- |
| endif # sparc |
| endif # HOSTARCH,ARCH |
| endif # CROSS_COMPILE |
| |
| export CROSS_COMPILE |
| |
| # load other configuration |
| include $(TOPDIR)/config.mk |
| |
| ######################################################################### |
| # U-Boot objects....order is important (i.e. start must be first) |
| |
| OBJS = cpu/$(CPU)/start.o |
| ifeq ($(CPU),i386) |
| OBJS += cpu/$(CPU)/start16.o |
| OBJS += cpu/$(CPU)/resetvec.o |
| endif |
| ifeq ($(CPU),ppc4xx) |
| OBJS += cpu/$(CPU)/resetvec.o |
| endif |
| ifeq ($(CPU),mpc85xx) |
| OBJS += cpu/$(CPU)/resetvec.o |
| endif |
| |
| OBJS := $(addprefix $(obj),$(OBJS)) |
| |
| LIBS = lib_generic/libgeneric.a |
| LIBS += lib_generic/lzma/liblzma.a |
| LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ |
| "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) |
| LIBS += cpu/$(CPU)/lib$(CPU).a |
| ifdef SOC |
| LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a |
| endif |
| ifeq ($(CPU),ixp) |
| LIBS += cpu/ixp/npe/libnpe.a |
| endif |
| LIBS += lib_$(ARCH)/lib$(ARCH).a |
| LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ |
| fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a |
| LIBS += net/libnet.a |
| LIBS += disk/libdisk.a |
| LIBS += drivers/bios_emulator/libatibiosemu.a |
| LIBS += drivers/block/libblock.a |
| LIBS += drivers/dma/libdma.a |
| LIBS += drivers/fpga/libfpga.a |
| LIBS += drivers/gpio/libgpio.a |
| LIBS += drivers/hwmon/libhwmon.a |
| LIBS += drivers/i2c/libi2c.a |
| LIBS += drivers/input/libinput.a |
| LIBS += drivers/misc/libmisc.a |
| LIBS += drivers/mmc/libmmc.a |
| LIBS += drivers/mtd/libmtd.a |
| LIBS += drivers/mtd/nand/libnand.a |
| LIBS += drivers/mtd/nand_legacy/libnand_legacy.a |
| LIBS += drivers/mtd/onenand/libonenand.a |
| LIBS += drivers/mtd/ubi/libubi.a |
| LIBS += drivers/mtd/spi/libspi_flash.a |
| LIBS += drivers/net/libnet.a |
| LIBS += drivers/net/phy/libphy.a |
| LIBS += drivers/net/sk98lin/libsk98lin.a |
| LIBS += drivers/pci/libpci.a |
| LIBS += drivers/pcmcia/libpcmcia.a |
| LIBS += drivers/spi/libspi.a |
| ifeq ($(CPU),mpc83xx) |
| LIBS += drivers/qe/qe.a |
| endif |
| ifeq ($(CPU),mpc85xx) |
| LIBS += drivers/qe/qe.a |
| LIBS += cpu/mpc8xxx/ddr/libddr.a |
| TAG_SUBDIRS += cpu/mpc8xxx |
| endif |
| ifeq ($(CPU),mpc86xx) |
| LIBS += cpu/mpc8xxx/ddr/libddr.a |
| TAG_SUBDIRS += cpu/mpc8xxx |
| endif |
| LIBS += drivers/rtc/librtc.a |
| LIBS += drivers/serial/libserial.a |
| LIBS += drivers/usb/libusb.a |
| LIBS += drivers/video/libvideo.a |
| LIBS += common/libcommon.a |
| LIBS += libfdt/libfdt.a |
| LIBS += api/libapi.a |
| LIBS += post/libpost.a |
| |
| LIBS := $(addprefix $(obj),$(LIBS)) |
| .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE) |
| |
| LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a |
| LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) |
| |
| # Add GCC lib |
| PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc |
| |
| # The "tools" are needed early, so put this first |
| # Don't include stuff already done in $(LIBS) |
| SUBDIRS = tools \ |
| examples \ |
| api_examples |
| |
| .PHONY : $(SUBDIRS) |
| |
| ifeq ($(CONFIG_NAND_U_BOOT),y) |
| NAND_SPL = nand_spl |
| U_BOOT_NAND = $(obj)u-boot-nand.bin |
| endif |
| |
| ifeq ($(CONFIG_ONENAND_U_BOOT),y) |
| ONENAND_IPL = onenand_ipl |
| U_BOOT_ONENAND = $(obj)u-boot-onenand.bin |
| endif |
| |
| __OBJS := $(subst $(obj),,$(OBJS)) |
| __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) |
| |
| ######################################################################### |
| ######################################################################### |
| |
| ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) |
| ifeq ($(ARCH),blackfin) |
| ALL += $(obj)u-boot.ldr |
| endif |
| |
| all: $(ALL) |
| |
| $(obj)u-boot.hex: $(obj)u-boot |
| $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ |
| |
| $(obj)u-boot.srec: $(obj)u-boot |
| $(OBJCOPY) -O srec $< $@ |
| |
| $(obj)u-boot.bin: $(obj)u-boot |
| $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ |
| |
| $(obj)u-boot.ldr: $(obj)u-boot |
| $(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS) |
| |
| $(obj)u-boot.ldr.hex: $(obj)u-boot.ldr |
| $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary |
| |
| $(obj)u-boot.ldr.srec: $(obj)u-boot.ldr |
| $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary |
| |
| $(obj)u-boot.img: $(obj)u-boot.bin |
| ./tools/mkimage -A $(ARCH) -T firmware -C none \ |
| -a $(TEXT_BASE) -e 0 \ |
| -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ |
| sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ |
| -d $< $@ |
| |
| $(obj)u-boot.sha1: $(obj)u-boot.bin |
| $(obj)tools/ubsha1 $(obj)u-boot.bin |
| |
| $(obj)u-boot.dis: $(obj)u-boot |
| $(OBJDUMP) -d $< > $@ |
| |
| $(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) |
| UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ |
| sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ |
| cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ |
| --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ |
| -Map u-boot.map -o u-boot |
| |
| $(OBJS): depend $(obj)include/autoconf.mk |
| $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) |
| |
| $(LIBS): depend $(obj)include/autoconf.mk $(SUBDIRS) |
| $(MAKE) -C $(dir $(subst $(obj),,$@)) |
| |
| $(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk |
| $(MAKE) -C $(dir $(subst $(obj),,$@)) |
| |
| $(SUBDIRS): depend $(obj)include/autoconf.mk |
| $(MAKE) -C $@ all |
| |
| $(LDSCRIPT): depend $(obj)include/autoconf.mk |
| $(MAKE) -C $(dir $@) $(notdir $@) |
| |
| $(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk |
| $(MAKE) -C nand_spl/board/$(BOARDDIR) all |
| |
| $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk |
| cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin |
| |
| $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk |
| $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all |
| |
| $(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk |
| cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin |
| cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin |
| |
| $(VERSION_FILE): |
| @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ |
| '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp |
| @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ |
| |
| $(TIMESTAMP_FILE): |
| @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@ |
| @date +'#define U_BOOT_TIME "%T"' >> $@ |
| |
| gdbtools: |
| $(MAKE) -C tools/gdb all || exit 1 |
| |
| updater: |
| $(MAKE) -C tools/updater all || exit 1 |
| |
| env: |
| $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1 |
| |
| depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) |
| for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done |
| |
| TAG_SUBDIRS += include |
| TAG_SUBDIRS += lib_generic board/$(BOARDDIR) |
| TAG_SUBDIRS += cpu/$(CPU) |
| TAG_SUBDIRS += lib_$(ARCH) |
| TAG_SUBDIRS += fs/cramfs |
| TAG_SUBDIRS += fs/fat |
| TAG_SUBDIRS += fs/fdos |
| TAG_SUBDIRS += fs/jffs2 |
| TAG_SUBDIRS += fs/yaffs2 |
| TAG_SUBDIRS += net |
| TAG_SUBDIRS += disk |
| TAG_SUBDIRS += common |
| TAG_SUBDIRS += drivers/bios_emulator |
| TAG_SUBDIRS += drivers/block |
| TAG_SUBDIRS += drivers/gpio |
| TAG_SUBDIRS += drivers/hwmon |
| TAG_SUBDIRS += drivers/i2c |
| TAG_SUBDIRS += drivers/input |
| TAG_SUBDIRS += drivers/misc |
| TAG_SUBDIRS += drivers/mmc |
| TAG_SUBDIRS += drivers/mtd |
| TAG_SUBDIRS += drivers/mtd/nand |
| TAG_SUBDIRS += drivers/mtd/nand_legacy |
| TAG_SUBDIRS += drivers/mtd/onenand |
| TAG_SUBDIRS += drivers/mtd/spi |
| TAG_SUBDIRS += drivers/net |
| TAG_SUBDIRS += drivers/net/sk98lin |
| TAG_SUBDIRS += drivers/pci |
| TAG_SUBDIRS += drivers/pcmcia |
| TAG_SUBDIRS += drivers/qe |
| TAG_SUBDIRS += drivers/rtc |
| TAG_SUBDIRS += drivers/serial |
| TAG_SUBDIRS += drivers/spi |
| TAG_SUBDIRS += drivers/usb |
| TAG_SUBDIRS += drivers/video |
| |
| tags ctags: |
| ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \ |
| -name '*.[ch]' -print` |
| |
| etags: |
| etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \ |
| -name '*.[ch]' -print` |
| cscope: |
| find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \ |
| > cscope.files |
| cscope -b -q -k |
| |
| $(obj)System.map: $(obj)u-boot |
| @$(NM) $< | \ |
| grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ |
| sort > $(obj)System.map |
| |
| # |
| # Auto-generate the autoconf.mk file (which is included by all makefiles) |
| # |
| # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. |
| # the dep file is only include in this top level makefile to determine when |
| # to regenerate the autoconf.mk file. |
| $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h |
| @$(XECHO) Generating $@ ; \ |
| set -e ; \ |
| : Generate the dependancies ; \ |
| $(CC) -x c -DDO_DEPS_ONLY -M $(HOST_CFLAGS) $(CPPFLAGS) \ |
| -MQ $(obj)include/autoconf.mk include/common.h > $@ |
| |
| $(obj)include/autoconf.mk: $(obj)include/config.h |
| @$(XECHO) Generating $@ ; \ |
| set -e ; \ |
| : Extract the config macros ; \ |
| $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ |
| sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ |
| mv $@.tmp $@ |
| |
| sinclude $(obj)include/autoconf.mk.dep |
| |
| ######################################################################### |
| else # !config.mk |
| all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ |
| $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ |
| $(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \ |
| dep tags ctags etags cscope $(obj)System.map: |
| @echo "System not configured - see README" >&2 |
| @ exit 1 |
| endif # config.mk |
| |
| .PHONY : CHANGELOG |
| CHANGELOG: |
| git log --no-merges U-Boot-1_1_5.. | \ |
| unexpand -a | sed -e 's/\s\s*$$//' > $@ |
| |
| include/license.h: tools/bin2header COPYING |
| cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h |
| ######################################################################### |
| |
| unconfig: |
| @rm -f $(obj)include/config.h $(obj)include/config.mk \ |
| $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ |
| $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep |
| |
| #======================================================================== |
| # PowerPC |
| #======================================================================== |
| |
| ######################################################################### |
| ## MPC5xx Systems |
| ######################################################################### |
| |
| canmb_config: unconfig |
| @$(MKCONFIG) -a canmb ppc mpc5xxx canmb |
| |
| cmi_mpc5xx_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi |
| |
| PATI_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl |
| |
| ######################################################################### |
| ## MPC5xxx Systems |
| ######################################################################### |
| |
| aev_config: unconfig |
| @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc |
| |
| BC3450_config: unconfig |
| @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 |
| |
| cm5200_config: unconfig |
| @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 |
| |
| cpci5200_config: unconfig |
| @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd |
| |
| hmi1001_config: unconfig |
| @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001 |
| |
| Lite5200_config \ |
| Lite5200_LOWBOOT_config \ |
| Lite5200_LOWBOOT08_config \ |
| icecube_5200_config \ |
| icecube_5200_LOWBOOT_config \ |
| icecube_5200_LOWBOOT08_config \ |
| icecube_5200_DDR_config \ |
| icecube_5200_DDR_LOWBOOT_config \ |
| icecube_5200_DDR_LOWBOOT08_config \ |
| icecube_5100_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/icecube |
| @[ -z "$(findstring LOWBOOT_,$@)" ] || \ |
| { if [ "$(findstring DDR,$@)" ] ; \ |
| then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ |
| else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ |
| fi ; \ |
| $(XECHO) "... with LOWBOOT configuration" ; \ |
| } |
| @[ -z "$(findstring LOWBOOT08,$@)" ] || \ |
| { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ |
| echo "... with 8 MB flash only" ; \ |
| $(XECHO) "... with LOWBOOT configuration" ; \ |
| } |
| @[ -z "$(findstring DDR,$@)" ] || \ |
| { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ |
| $(XECHO) "... DDR memory revision" ; \ |
| } |
| @[ -z "$(findstring 5200,$@)" ] || \ |
| { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with MPC5200 processor" ; \ |
| } |
| @[ -z "$(findstring 5100,$@)" ] || \ |
| { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with MGT5100 processor" ; \ |
| } |
| @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube |
| |
| jupiter_config: unconfig |
| @$(MKCONFIG) jupiter ppc mpc5xxx jupiter |
| |
| inka4x0_config: unconfig |
| @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 |
| |
| lite5200b_config \ |
| lite5200b_PM_config \ |
| lite5200b_LOWBOOT_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/icecube |
| @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h |
| @ $(XECHO) "... DDR memory revision" |
| @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h |
| @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h |
| @[ -z "$(findstring _PM_,$@)" ] || \ |
| { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with power management (low-power mode) support" ; \ |
| } |
| @[ -z "$(findstring LOWBOOT_,$@)" ] || \ |
| { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ |
| $(XECHO) "... with LOWBOOT configuration" ; \ |
| } |
| @ $(XECHO) "... with MPC5200B processor" |
| @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube |
| |
| mcc200_config \ |
| mcc200_SDRAM_config \ |
| mcc200_highboot_config \ |
| mcc200_COM12_config \ |
| mcc200_COM12_SDRAM_config \ |
| mcc200_COM12_highboot_config \ |
| mcc200_COM12_highboot_SDRAM_config \ |
| mcc200_highboot_SDRAM_config \ |
| prs200_config \ |
| prs200_DDR_config \ |
| prs200_highboot_config \ |
| prs200_highboot_DDR_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/mcc200 |
| @[ -n "$(findstring highboot,$@)" ] || \ |
| { $(XECHO) "... with lowboot configuration" ; \ |
| } |
| @[ -z "$(findstring highboot,$@)" ] || \ |
| { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ |
| $(XECHO) "... with highboot configuration" ; \ |
| } |
| @[ -n "$(findstring _SDRAM,$@)" ] || \ |
| { if [ -n "$(findstring mcc200,$@)" ]; \ |
| then \ |
| $(XECHO) "... with DDR" ; \ |
| else \ |
| if [ -n "$(findstring _DDR,$@)" ];\ |
| then \ |
| $(XECHO) "... with DDR" ; \ |
| else \ |
| echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ |
| $(XECHO) "... with SDRAM" ; \ |
| fi; \ |
| fi; \ |
| } |
| @[ -z "$(findstring _SDRAM,$@)" ] || \ |
| { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with SDRAM" ; \ |
| } |
| @[ -z "$(findstring COM12,$@)" ] || \ |
| { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with console on COM12" ; \ |
| } |
| @[ -z "$(findstring prs200,$@)" ] || \ |
| { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ |
| } |
| @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200 |
| |
| mecp5200_config: unconfig |
| @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd |
| |
| motionpro_config: unconfig |
| @$(MKCONFIG) motionpro ppc mpc5xxx motionpro |
| |
| mucmc52_config: unconfig |
| @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52 |
| |
| munices_config: unconfig |
| @$(MKCONFIG) munices ppc mpc5xxx munices |
| |
| MVBC_P_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/mvbc_p |
| @ >$(obj)include/config.h |
| @[ -z "$(findstring MVBC_P,$@)" ] || \ |
| { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } |
| @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision |
| |
| o2dnt_config: unconfig |
| @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt |
| |
| pf5200_config: unconfig |
| @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd |
| |
| PM520_config \ |
| PM520_DDR_config \ |
| PM520_ROMBOOT_config \ |
| PM520_ROMBOOT_DDR_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring DDR,$@)" ] || \ |
| { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ |
| $(XECHO) "... DDR memory revision" ; \ |
| } |
| @[ -z "$(findstring ROMBOOT,$@)" ] || \ |
| { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ |
| $(XECHO) "... booting from 8-bit flash" ; \ |
| } |
| @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520 |
| |
| smmaco4_config: unconfig |
| @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc |
| |
| spieval_config: unconfig |
| @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc |
| |
| TB5200_B_config \ |
| TB5200_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _B,$@)" ] || \ |
| { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with MPC5200B processor" ; \ |
| } |
| @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc |
| |
| MINI5200_config \ |
| EVAL5200_config \ |
| TOP5200_config: unconfig |
| @mkdir -p $(obj)include |
| @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk |
| |
| Total5100_config \ |
| Total5200_config \ |
| Total5200_lowboot_config \ |
| Total5200_Rev2_config \ |
| Total5200_Rev2_lowboot_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/total5200 |
| @[ -z "$(findstring 5100,$@)" ] || \ |
| { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with MGT5100 processor" ; \ |
| } |
| @[ -z "$(findstring 5200,$@)" ] || \ |
| { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with MPC5200 processor" ; \ |
| } |
| @[ -n "$(findstring Rev,$@)" ] || \ |
| { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... revision 1 board" ; \ |
| } |
| @[ -z "$(findstring Rev2_,$@)" ] || \ |
| { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ |
| $(XECHO) "... revision 2 board" ; \ |
| } |
| @[ -z "$(findstring lowboot_,$@)" ] || \ |
| { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ |
| $(XECHO) "... with lowboot configuration" ; \ |
| } |
| @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200 |
| |
| cam5200_config \ |
| cam5200_niosflash_config \ |
| fo300_config \ |
| MiniFAP_config \ |
| TQM5200S_config \ |
| TQM5200S_HIGHBOOT_config \ |
| TQM5200_B_config \ |
| TQM5200_B_HIGHBOOT_config \ |
| TQM5200_config \ |
| TQM5200_STK100_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/tqc/tqm5200 |
| @[ -z "$(findstring cam5200,$@)" ] || \ |
| { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ |
| $(XECHO) "... TQM5200S on Cam5200" ; \ |
| } |
| @[ -z "$(findstring niosflash,$@)" ] || \ |
| { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with NIOS flash driver" ; \ |
| } |
| @[ -z "$(findstring fo300,$@)" ] || \ |
| { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ |
| $(XECHO) "... TQM5200 on FO300" ; \ |
| } |
| @[ -z "$(findstring MiniFAP,$@)" ] || \ |
| { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ |
| $(XECHO) "... TQM5200_AC on MiniFAP" ; \ |
| } |
| @[ -z "$(findstring STK100,$@)" ] || \ |
| { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ |
| $(XECHO) "... on a STK52XX.100 base board" ; \ |
| } |
| @[ -z "$(findstring TQM5200_B,$@)" ] || \ |
| { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring TQM5200S,$@)" ] || \ |
| { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring HIGHBOOT,$@)" ] || \ |
| { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ |
| } |
| @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc |
| |
| uc101_config: unconfig |
| @$(MKCONFIG) uc101 ppc mpc5xxx uc101 |
| |
| v38b_config: unconfig |
| @$(MKCONFIG) -a v38b ppc mpc5xxx v38b |
| |
| ######################################################################### |
| ## MPC512x Systems |
| ######################################################################### |
| |
| ads5121_config \ |
| ads5121_rev2_config \ |
| : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring rev2,$@)" ] ; then \ |
| echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ |
| fi |
| @$(MKCONFIG) -a ads5121 ppc mpc512x ads5121 |
| |
| |
| ######################################################################### |
| ## MPC8xx Systems |
| ######################################################################### |
| |
| Adder_config \ |
| Adder87x_config \ |
| AdderII_config \ |
| : unconfig |
| @mkdir -p $(obj)include |
| $(if $(findstring AdderII,$@), \ |
| @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) |
| @$(MKCONFIG) -a Adder ppc mpc8xx adder |
| |
| AdderUSB_config: unconfig |
| @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder |
| |
| ADS860_config \ |
| FADS823_config \ |
| FADS850SAR_config \ |
| MPC86xADS_config \ |
| MPC885ADS_config \ |
| FADS860T_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads |
| |
| AMX860_config : unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel |
| |
| c2mon_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon |
| |
| CCM_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens |
| |
| cogent_mpc8xx_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent |
| |
| ELPT860_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX |
| |
| EP88x_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x |
| |
| ESTEEM192E_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e |
| |
| ETX094_config : unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094 |
| |
| FLAGADM_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm |
| |
| xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) |
| |
| GEN860T_SC_config \ |
| GEN860T_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _SC,$@)" ] || \ |
| { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ |
| $(XECHO) "With reduced H/W feature set (SC)..." ; \ |
| } |
| @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t |
| |
| GENIETV_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv |
| |
| GTH_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth |
| |
| hermes_config : unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes |
| |
| HMI10_config : unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc |
| |
| IAD210_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens |
| |
| xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) |
| |
| ICU862_100MHz_config \ |
| ICU862_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _100MHz,$@)" ] || \ |
| { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with 100MHz system clock" ; \ |
| } |
| @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 |
| |
| IP860_config : unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860 |
| |
| IVML24_256_config \ |
| IVML24_128_config \ |
| IVML24_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring IVML24_config,$@)" ] || \ |
| { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring IVML24_128_config,$@)" ] || \ |
| { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring IVML24_256_config,$@)" ] || \ |
| { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ |
| } |
| @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm |
| |
| IVMS8_256_config \ |
| IVMS8_128_config \ |
| IVMS8_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring IVMS8_config,$@)" ] || \ |
| { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ |
| { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ |
| { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ |
| } |
| @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm |
| |
| KUP4K_config : unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup |
| |
| KUP4X_config : unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup |
| |
| LANTEC_config : unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec |
| |
| lwmon_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon |
| |
| MBX_config \ |
| MBX860T_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx |
| |
| mgsuvd_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd keymile |
| |
| MHPC_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec |
| |
| xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) |
| |
| NETVIA_V2_config \ |
| NETVIA_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring NETVIA_config,$@)" ] || \ |
| { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... Version 1" ; \ |
| } |
| @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ |
| { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ |
| $(XECHO) "... Version 2" ; \ |
| } |
| @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia |
| |
| xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) |
| |
| NETPHONE_V2_config \ |
| NETPHONE_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring NETPHONE_config,$@)" ] || \ |
| { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ |
| { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ |
| } |
| @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone |
| |
| xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) |
| |
| NETTA_ISDN_6412_SWAPHOOK_config \ |
| NETTA_ISDN_SWAPHOOK_config \ |
| NETTA_6412_SWAPHOOK_config \ |
| NETTA_SWAPHOOK_config \ |
| NETTA_ISDN_6412_config \ |
| NETTA_ISDN_config \ |
| NETTA_6412_config \ |
| NETTA_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring ISDN_,$@)" ] || \ |
| { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ |
| } |
| @[ -n "$(findstring ISDN_,$@)" ] || \ |
| { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring 6412_,$@)" ] || \ |
| { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ |
| } |
| @[ -n "$(findstring 6412_,$@)" ] || \ |
| { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ |
| { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ |
| } |
| @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ |
| { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ |
| } |
| @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta |
| |
| xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) |
| |
| NETTA2_V2_config \ |
| NETTA2_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring NETTA2_config,$@)" ] || \ |
| { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ |
| { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ |
| } |
| @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 |
| |
| NC650_Rev1_config \ |
| NC650_Rev2_config \ |
| CP850_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring CP850,$@)" ] || \ |
| { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring Rev1,$@)" ] || \ |
| { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring Rev2,$@)" ] || \ |
| { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ |
| } |
| @$(MKCONFIG) -a NC650 ppc mpc8xx nc650 |
| |
| NX823_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823 |
| |
| pcu_e_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens |
| |
| QS850_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc |
| |
| QS823_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc |
| |
| QS860T_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc |
| |
| quantum_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum |
| |
| R360MPI_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi |
| |
| RBC823_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823 |
| |
| RPXClassic_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic |
| |
| RPXlite_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite |
| |
| RPXlite_DW_64_config \ |
| RPXlite_DW_LCD_config \ |
| RPXlite_DW_64_LCD_config \ |
| RPXlite_DW_NVRAM_config \ |
| RPXlite_DW_NVRAM_64_config \ |
| RPXlite_DW_NVRAM_LCD_config \ |
| RPXlite_DW_NVRAM_64_LCD_config \ |
| RPXlite_DW_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _64,$@)" ] || \ |
| { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with 64MHz system clock ..."; \ |
| } |
| @[ -z "$(findstring _LCD,$@)" ] || \ |
| { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with LCD display ..."; \ |
| } |
| @[ -z "$(findstring _NVRAM,$@)" ] || \ |
| { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with ENV in NVRAM ..."; \ |
| } |
| @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw |
| |
| rmu_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu |
| |
| RRvision_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision |
| |
| RRvision_LCD_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_LCD" >$(obj)include/config.h |
| @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h |
| @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision |
| |
| SM850_config : unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc |
| |
| spc1920_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920 |
| |
| SPD823TS_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx |
| |
| stxxtc_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc |
| |
| svm_sc8xx_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx |
| |
| SXNI855T_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet |
| |
| # EMK MPC8xx based modules |
| TOP860_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk |
| |
| # Play some tricks for configuration selection |
| # Only 855 and 860 boards may come with FEC |
| # and only 823 boards may have LCD support |
| xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) |
| |
| FPS850L_config \ |
| FPS860L_config \ |
| NSCU_config \ |
| TQM823L_config \ |
| TQM823L_LCD_config \ |
| TQM850L_config \ |
| TQM855L_config \ |
| TQM860L_config \ |
| TQM862L_config \ |
| TQM823M_config \ |
| TQM850M_config \ |
| TQM855M_config \ |
| TQM860M_config \ |
| TQM862M_config \ |
| TQM866M_config \ |
| TQM885D_config \ |
| TK885D_config \ |
| virtlab2_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _LCD,$@)" ] || \ |
| { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with LCD display" ; \ |
| } |
| @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc |
| |
| TTTech_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_LCD" >$(obj)include/config.h |
| @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h |
| @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc |
| |
| uc100_config : unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100 |
| |
| v37_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_LCD" >$(obj)include/config.h |
| @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h |
| @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37 |
| |
| wtk_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_LCD" >$(obj)include/config.h |
| @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h |
| @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc |
| |
| ######################################################################### |
| ## PPC4xx Systems |
| ######################################################################### |
| xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) |
| |
| acadia_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc |
| |
| acadia_nand_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/amcc/acadia |
| @mkdir -p $(obj)nand_spl/board/amcc/acadia |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc |
| @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| |
| ADCIOP_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd |
| |
| alpr_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive |
| |
| AP1000_config:unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix |
| |
| APC405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd |
| |
| AR405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd |
| |
| ASH405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd |
| |
| bamboo_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc |
| |
| bamboo_nand_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/amcc/bamboo |
| @mkdir -p $(obj)nand_spl/board/amcc/bamboo |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc |
| @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| |
| bubinga_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc |
| |
| CANBT_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd |
| |
| # Arches, Canyonlands & Glacier use different U-Boot images |
| arches_config \ |
| canyonlands_config \ |
| glacier_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ |
| tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc |
| |
| canyonlands_nand_config \ |
| glacier_nand_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/amcc/canyonlands |
| @mkdir -p $(obj)nand_spl/board/amcc/canyonlands |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ |
| tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc |
| @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| |
| CATcenter_config \ |
| CATcenter_25_config \ |
| CATcenter_33_config: unconfig |
| @mkdir -p $(obj)include |
| @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h |
| @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h |
| @[ -z "$(findstring _25,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ |
| $(XECHO) "SysClk = 25MHz" ; \ |
| } |
| @[ -z "$(findstring _33,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ |
| $(XECHO) "SysClk = 33MHz" ; \ |
| } |
| @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave |
| |
| CMS700_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd |
| |
| CPCI2DP_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd |
| |
| CPCI405_config \ |
| CPCI4052_config \ |
| CPCI405DT_config \ |
| CPCI405AB_config: unconfig |
| @mkdir -p $(obj)board/esd/cpci405 |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd |
| |
| CPCIISER4_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd |
| |
| CRAYL1_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray |
| |
| csb272_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272 |
| |
| csb472_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472 |
| |
| DASA_SIM_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd |
| |
| DP405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd |
| |
| DU405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd |
| |
| DU440_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd |
| |
| ebony_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc |
| |
| ERIC_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric |
| |
| EXBITGEN_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen |
| |
| fx12mm_flash_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic |
| @mkdir -p $(obj)include $(obj)board/avnet/fx12mm |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ |
| > $(obj)board/avnet/fx12mm/config.tmp |
| @echo "TEXT_BASE := 0xFFCB0000" \ |
| >> $(obj)board/avnet/fx12mm/config.tmp |
| @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet |
| |
| fx12mm_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic |
| @mkdir -p $(obj)include $(obj)board/avnet/fx12mm |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ |
| > $(obj)board/avnet/fx12mm/config.tmp |
| @echo "TEXT_BASE := 0x03000000" \ |
| >> $(obj)board/avnet/fx12mm/config.tmp |
| @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet |
| |
| G2000_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 |
| |
| hcu4_config: unconfig |
| @mkdir -p $(obj)board/netstal/common |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal |
| |
| hcu5_config: unconfig |
| @mkdir -p $(obj)board/netstal/common |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal |
| |
| HH405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd |
| |
| HUB405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd |
| |
| JSE_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse |
| |
| KAREF_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst |
| |
| katmai_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc |
| |
| # Kilauea & Haleakala images are identical (recognized via PVR) |
| kilauea_config \ |
| haleakala_config: unconfig |
| @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc |
| |
| kilauea_nand_config \ |
| haleakala_nand_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/amcc/kilauea |
| @mkdir -p $(obj)nand_spl/board/amcc/kilauea |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc |
| @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| |
| korat_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat |
| |
| luan_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc |
| |
| lwmon5_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5 |
| |
| makalu_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc |
| |
| mcu25_config: unconfig |
| @mkdir -p $(obj)board/netstal/common |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal |
| |
| METROBOX_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst |
| |
| MIP405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl |
| |
| MIP405T_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_MIP405T" >$(obj)include/config.h |
| @$(XECHO) "Enable subset config for MIP405T" |
| @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl |
| |
| ML2_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2 |
| |
| ml300_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx |
| |
| ml507_flash_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic |
| @mkdir -p $(obj)include $(obj)board/xilinx/ml507 |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ |
| > $(obj)board/xilinx/ml507/config.tmp |
| @echo "TEXT_BASE := 0xFE360000" \ |
| >> $(obj)board/xilinx/ml507/config.tmp |
| @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx |
| |
| ml507_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic |
| @mkdir -p $(obj)include $(obj)board/xilinx/ml507 |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ |
| > $(obj)board/xilinx/ml507/config.tmp |
| @echo "TEXT_BASE := 0x04000000" \ |
| >> $(obj)board/xilinx/ml507/config.tmp |
| @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx |
| |
| neo_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys |
| |
| ocotea_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc |
| |
| OCRTC_config \ |
| ORSG_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd |
| |
| p3p440_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive |
| |
| PCI405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd |
| |
| pcs440ep_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep |
| |
| PIP405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl |
| |
| PLU405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd |
| |
| PMC405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd |
| |
| PMC440_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd |
| |
| PPChameleonEVB_config \ |
| PPChameleonEVB_BA_25_config \ |
| PPChameleonEVB_ME_25_config \ |
| PPChameleonEVB_HI_25_config \ |
| PPChameleonEVB_BA_33_config \ |
| PPChameleonEVB_ME_33_config \ |
| PPChameleonEVB_HI_33_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring EVB_BA,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ |
| $(XECHO) "... BASIC model" ; \ |
| } |
| @[ -z "$(findstring EVB_ME,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... MEDIUM model" ; \ |
| } |
| @[ -z "$(findstring EVB_HI,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ |
| $(XECHO) "... HIGH-END model" ; \ |
| } |
| @[ -z "$(findstring _25,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ |
| $(XECHO) "SysClk = 25MHz" ; \ |
| } |
| @[ -z "$(findstring _33,$@)" ] || \ |
| { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ |
| $(XECHO) "SysClk = 33MHz" ; \ |
| } |
| @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave |
| |
| quad100hd_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd |
| |
| redwood_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc |
| |
| sbc405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 |
| |
| sc3_config:unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 |
| |
| sequoia_config \ |
| rainier_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ |
| tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc |
| |
| sequoia_nand_config \ |
| rainier_nand_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/amcc/sequoia |
| @mkdir -p $(obj)nand_spl/board/amcc/sequoia |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ |
| tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc |
| @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| |
| taihu_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc |
| |
| taishan_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc |
| |
| v5fx30teval_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic |
| @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ |
| > $(obj)board/avnet/v5fx30teval/config.tmp |
| @echo "TEXT_BASE := 0x03000000" \ |
| >> $(obj)board/avnet/v5fx30teval/config.tmp |
| @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet |
| |
| v5fx30teval_flash_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic |
| @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ |
| > $(obj)board/avnet/v5fx30teval/config.tmp |
| @echo "TEXT_BASE := 0xFF1C0000" \ |
| >> $(obj)board/avnet/v5fx30teval/config.tmp |
| @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet |
| |
| VOH405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd |
| |
| VOM405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd |
| |
| W7OLMC_config \ |
| W7OLMG_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o |
| |
| # Walnut & Sycamore images are identical (recognized via PVR) |
| walnut_config \ |
| sycamore_config: unconfig |
| @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc |
| |
| WUH405_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd |
| |
| xilinx-ppc405-generic_flash_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ |
| > $(obj)board/xilinx/ppc405-generic/config.tmp |
| @echo "TEXT_BASE := 0xFE360000" \ |
| >> $(obj)board/xilinx/ppc405-generic/config.tmp |
| @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx |
| |
| xilinx-ppc405-generic_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ |
| > $(obj)board/xilinx/ppc405-generic/config.tmp |
| @echo "TEXT_BASE := 0x04000000" \ |
| >> $(obj)board/xilinx/ppc405-generic/config.tmp |
| @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx |
| |
| xilinx-ppc440-generic_flash_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ |
| > $(obj)board/xilinx/ppc440-generic/config.tmp |
| @echo "TEXT_BASE := 0xFE360000" \ |
| >> $(obj)board/xilinx/ppc440-generic/config.tmp |
| @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx |
| |
| xilinx-ppc440-generic_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ |
| > $(obj)board/xilinx/ppc440-generic/config.tmp |
| @echo "TEXT_BASE := 0x04000000" \ |
| >> $(obj)board/xilinx/ppc440-generic/config.tmp |
| @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx |
| |
| XPEDITE1K_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k |
| |
| yosemite_config \ |
| yellowstone_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ |
| tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc |
| |
| yucca_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc |
| |
| zeus_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus |
| |
| ######################################################################### |
| ## MPC8220 Systems |
| ######################################################################### |
| |
| Alaska8220_config \ |
| Yukon8220_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska |
| |
| sorcery_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery |
| |
| ######################################################################### |
| ## MPC824x Systems |
| ######################################################################### |
| xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) |
| |
| A3000_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000 |
| |
| barco_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x barco |
| |
| BMW_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw |
| |
| CPC45_config \ |
| CPC45_ROMBOOT_config: unconfig |
| @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45 |
| @cd $(obj)include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ |
| $(XECHO) "... booting from 8-bit flash" ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ |
| $(XECHO) "... booting from 64-bit flash" ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> config.mk; |
| |
| CU824_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824 |
| |
| debris_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin |
| |
| eXalion_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion |
| |
| HIDDEN_DRAGON_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon |
| |
| kvme080_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin |
| |
| # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as |
| # time permits. |
| #linkstation_HDLAN_config \ |
| # Remove this line when HDLAN is fixed |
| linkstation_HGLAN_config: unconfig |
| @mkdir -p $(obj)include |
| @case $@ in \ |
| *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \ |
| *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \ |
| esac |
| @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation |
| |
| MOUSSE_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse |
| |
| MUSENKI_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki |
| |
| MVBLUE_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue |
| |
| OXC_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc |
| |
| PN62_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62 |
| |
| Sandpoint8240_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint |
| |
| Sandpoint8245_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint |
| |
| sbc8240_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240 |
| |
| SL8245_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245 |
| |
| utx8245_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245 |
| |
| ######################################################################### |
| ## MPC8260 Systems |
| ######################################################################### |
| |
| atc_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc |
| |
| cogent_mpc8260_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent |
| |
| CPU86_config \ |
| CPU86_ROMBOOT_config: unconfig |
| @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86 |
| @cd $(obj)include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ |
| $(XECHO) "... booting from 8-bit flash" ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ |
| $(XECHO) "... booting from 64-bit flash" ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> config.mk; |
| |
| CPU87_config \ |
| CPU87_ROMBOOT_config: unconfig |
| @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87 |
| @cd $(obj)include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ |
| $(XECHO) "... booting from 8-bit flash" ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ |
| $(XECHO) "... booting from 64-bit flash" ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> config.mk; |
| |
| ep8248_config \ |
| ep8248E_config : unconfig |
| @$(MKCONFIG) ep8248 ppc mpc8260 ep8248 |
| |
| ep8260_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260 |
| |
| ep82xxm_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm |
| |
| gw8260_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260 |
| |
| hymod_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod |
| |
| IDS8247_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247 |
| |
| IPHASE4539_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539 |
| |
| ISPAN_config \ |
| ISPAN_REVB_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _REVB_,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan |
| |
| mgcoge_config : unconfig |
| @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile |
| |
| MPC8260ADS_config \ |
| MPC8260ADS_lowboot_config \ |
| MPC8260ADS_33MHz_config \ |
| MPC8260ADS_33MHz_lowboot_config \ |
| MPC8260ADS_40MHz_config \ |
| MPC8260ADS_40MHz_lowboot_config \ |
| MPC8272ADS_config \ |
| MPC8272ADS_lowboot_config \ |
| PQ2FADS_config \ |
| PQ2FADS_lowboot_config \ |
| PQ2FADS-VR_config \ |
| PQ2FADS-VR_lowboot_config \ |
| PQ2FADS-ZU_config \ |
| PQ2FADS-ZU_lowboot_config \ |
| PQ2FADS-ZU_66MHz_config \ |
| PQ2FADS-ZU_66MHz_lowboot_config \ |
| : unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/freescale/mpc8260ads |
| $(if $(findstring PQ2FADS,$@), \ |
| @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \ |
| @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) |
| $(if $(findstring MHz,$@), \ |
| @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ |
| $(if $(findstring VR,$@), \ |
| @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) |
| @[ -z "$(findstring lowboot_,$@)" ] || \ |
| { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \ |
| $(XECHO) "... with lowboot configuration" ; \ |
| } |
| @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale |
| |
| MPC8266ADS_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale |
| |
| muas3001_dev_config \ |
| muas3001_config : unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/muas3001 |
| @if [ "$(findstring dev,$@)" ] ; then \ |
| echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001 |
| |
| # PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash |
| PM825_config \ |
| PM825_ROMBOOT_config \ |
| PM825_BIGFLASH_config \ |
| PM825_ROMBOOT_BIGFLASH_config \ |
| PM826_config \ |
| PM826_ROMBOOT_config \ |
| PM826_BIGFLASH_config \ |
| PM826_ROMBOOT_BIGFLASH_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/pm826 |
| @if [ "$(findstring PM825_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI" >$(obj)include/config.h ; \ |
| else \ |
| >$(obj)include/config.h ; \ |
| fi |
| @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| $(XECHO) "... booting from 8-bit flash" ; \ |
| echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ |
| if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ |
| $(XECHO) "... with 32 MB Flash" ; \ |
| echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ |
| fi; \ |
| else \ |
| $(XECHO) "... booting from 64-bit flash" ; \ |
| if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ |
| $(XECHO) "... with 32 MB Flash" ; \ |
| echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \ |
| else \ |
| echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ |
| fi; \ |
| fi |
| @$(MKCONFIG) -a PM826 ppc mpc8260 pm826 |
| |
| PM828_config \ |
| PM828_PCI_config \ |
| PM828_ROMBOOT_config \ |
| PM828_ROMBOOT_PCI_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/pm826 |
| @if [ "$(findstring _PCI_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with PCI enabled" ; \ |
| fi |
| @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| $(XECHO) "... booting from 8-bit flash" ; \ |
| echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ |
| fi |
| @$(MKCONFIG) -a PM828 ppc mpc8260 pm828 |
| |
| ppmc8260_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260 |
| |
| Rattler8248_config \ |
| Rattler_config: unconfig |
| @mkdir -p $(obj)include |
| $(if $(findstring 8248,$@), \ |
| @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) |
| @$(MKCONFIG) -a Rattler ppc mpc8260 rattler |
| |
| RPXsuper_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper |
| |
| rsdproto_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto |
| |
| sacsng_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng |
| |
| sbc8260_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260 |
| |
| SCM_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens |
| |
| TQM8255_AA_config \ |
| TQM8260_AA_config \ |
| TQM8260_AB_config \ |
| TQM8260_AC_config \ |
| TQM8260_AD_config \ |
| TQM8260_AE_config \ |
| TQM8260_AF_config \ |
| TQM8260_AG_config \ |
| TQM8260_AH_config \ |
| TQM8260_AI_config \ |
| TQM8265_AA_config: unconfig |
| @mkdir -p $(obj)include |
| @case "$@" in \ |
| TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ |
| TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ |
| TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ |
| TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ |
| TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ |
| TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ |
| TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ |
| TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ |
| TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ |
| TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ |
| TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ |
| esac; \ |
| if [ "$${CTYPE}" != "MPC8260" ] ; then \ |
| echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ |
| fi; \ |
| echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ |
| echo "... with $${CFREQ}MHz system clock" ; \ |
| if [ "$${CACHE}" = "yes" ] ; then \ |
| echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with L2 Cache support" ; \ |
| else \ |
| echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ |
| $(XECHO) "... without L2 Cache support" ; \ |
| fi; \ |
| if [ "$${BMODE}" = "60x" ] ; then \ |
| echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with 60x Bus Mode" ; \ |
| else \ |
| echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ |
| $(XECHO) "... without 60x Bus Mode" ; \ |
| fi |
| @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc |
| |
| TQM8272_config: unconfig |
| @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc |
| |
| VoVPN-GW_66MHz_config \ |
| VoVPN-GW_100MHz_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h |
| @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk |
| |
| ZPC1900_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900 |
| |
| ######################################################################### |
| ## Coldfire |
| ######################################################################### |
| |
| M52277EVB_config \ |
| M52277EVB_spansion_config \ |
| M52277EVB_stmicro_config : unconfig |
| @case "$@" in \ |
| M52277EVB_config) FLASH=SPANSION;; \ |
| M52277EVB_spansion_config) FLASH=SPANSION;; \ |
| M52277EVB_stmicro_config) FLASH=STMICRO;; \ |
| esac; \ |
| if [ "$${FLASH}" = "SPANSION" ] ; then \ |
| echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ |
| cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ |
| $(XECHO) "... with SPANSION boot..." ; \ |
| fi; \ |
| if [ "$${FLASH}" = "STMICRO" ] ; then \ |
| echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ |
| cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ |
| $(XECHO) "... with ST Micro boot..." ; \ |
| fi |
| @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale |
| |
| M5235EVB_config \ |
| M5235EVB_Flash16_config \ |
| M5235EVB_Flash32_config: unconfig |
| @case "$@" in \ |
| M5235EVB_config) FLASH=16;; \ |
| M5235EVB_Flash16_config) FLASH=16;; \ |
| M5235EVB_Flash32_config) FLASH=32;; \ |
| esac; \ |
| if [ "$${FLASH}" != "16" ] ; then \ |
| echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ |
| cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ |
| else \ |
| echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ |
| cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ |
| fi |
| @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale |
| |
| M5249EVB_config : unconfig |
| @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale |
| |
| M5253DEMO_config : unconfig |
| @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale |
| |
| M5253EVBE_config : unconfig |
| @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale |
| |
| cobra5272_config : unconfig |
| @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 |
| |
| EB+MCF-EV123_config : unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/BuS/EB+MCF-EV123 |
| @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk |
| @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS |
| |
| EB+MCF-EV123_internal_config : unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/BuS/EB+MCF-EV123 |
| @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk |
| @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS |
| |
| idmr_config : unconfig |
| @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr |
| |
| M5271EVB_config : unconfig |
| @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale |
| |
| M5272C3_config : unconfig |
| @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale |
| |
| M5275EVB_config : unconfig |
| @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale |
| |
| M5282EVB_config : unconfig |
| @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale |
| |
| M53017EVB_config : unconfig |
| @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale |
| |
| M5329AFEE_config \ |
| M5329BFEE_config : unconfig |
| @case "$@" in \ |
| M5329AFEE_config) NAND=0;; \ |
| M5329BFEE_config) NAND=16;; \ |
| esac; \ |
| if [ "$${NAND}" != "0" ] ; then \ |
| echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale |
| |
| M5373EVB_config : unconfig |
| @case "$@" in \ |
| M5373EVB_config) NAND=16;; \ |
| esac; \ |
| if [ "$${NAND}" != "0" ] ; then \ |
| echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale |
| |
| M54451EVB_config \ |
| M54451EVB_spansion_config \ |
| M54451EVB_stmicro_config : unconfig |
| @case "$@" in \ |
| M54451EVB_config) FLASH=SPANSION;; \ |
| M54451EVB_spansion_config) FLASH=SPANSION;; \ |
| M54451EVB_stmicro_config) FLASH=STMICRO;; \ |
| esac; \ |
| if [ "$${FLASH}" = "SPANSION" ] ; then \ |
| echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ |
| $(XECHO) "... with SPANSION boot..." ; \ |
| fi; \ |
| if [ "$${FLASH}" = "STMICRO" ] ; then \ |
| echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ |
| $(XECHO) "... with ST Micro boot..." ; \ |
| fi; \ |
| echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; |
| @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale |
| |
| M54455EVB_config \ |
| M54455EVB_atmel_config \ |
| M54455EVB_intel_config \ |
| M54455EVB_a33_config \ |
| M54455EVB_a66_config \ |
| M54455EVB_i33_config \ |
| M54455EVB_i66_config \ |
| M54455EVB_stm33_config : unconfig |
| @case "$@" in \ |
| M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ |
| M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ |
| M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ |
| M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ |
| M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ |
| M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ |
| M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ |
| M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ |
| esac; \ |
| if [ "$${FLASH}" = "INTEL" ] ; then \ |
| echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ |
| $(XECHO) "... with INTEL boot..." ; \ |
| fi; \ |
| if [ "$${FLASH}" = "ATMEL" ] ; then \ |
| echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ |
| $(XECHO) "... with ATMEL boot..." ; \ |
| fi; \ |
| if [ "$${FLASH}" = "STMICRO" ] ; then \ |
| echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ |
| $(XECHO) "... with ST Micro boot..." ; \ |
| fi; \ |
| echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ |
| $(XECHO) "... with $${FREQ}Hz input clock" |
| @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale |
| |
| M5475AFE_config \ |
| M5475BFE_config \ |
| M5475CFE_config \ |
| M5475DFE_config \ |
| M5475EFE_config \ |
| M5475FFE_config \ |
| M5475GFE_config : unconfig |
| @case "$@" in \ |
| M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ |
| M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ |
| M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| esac; \ |
| echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ |
| if [ "$${RAM1}" != "0" ] ; then \ |
| echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${CODE}" != "0" ] ; then \ |
| echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${VID}" == "1" ] ; then \ |
| echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${USB}" == "1" ] ; then \ |
| echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale |
| |
| M5485AFE_config \ |
| M5485BFE_config \ |
| M5485CFE_config \ |
| M5485DFE_config \ |
| M5485EFE_config \ |
| M5485FFE_config \ |
| M5485GFE_config \ |
| M5485HFE_config : unconfig |
| @case "$@" in \ |
| M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ |
| M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ |
| M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ |
| esac; \ |
| echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ |
| if [ "$${RAM1}" != "0" ] ; then \ |
| echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${CODE}" != "0" ] ; then \ |
| echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${VID}" == "1" ] ; then \ |
| echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${USB}" == "1" ] ; then \ |
| echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale |
| |
| TASREG_config : unconfig |
| @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd |
| |
| ######################################################################### |
| ## MPC83xx Systems |
| ######################################################################### |
| |
| kmeter1_config: unconfig |
| @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile |
| |
| MPC8313ERDB_33_config \ |
| MPC8313ERDB_66_config \ |
| MPC8313ERDB_NAND_33_config \ |
| MPC8313ERDB_NAND_66_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/freescale/mpc8313erdb |
| @if [ "$(findstring _33_,$@)" ] ; then \ |
| $(XECHO) -n "...33M ..." ; \ |
| echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _66_,$@)" ] ; then \ |
| $(XECHO) -n "...66M..." ; \ |
| echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _NAND_,$@)" ] ; then \ |
| $(XECHO) -n "...NAND..." ; \ |
| echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \ |
| echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ |
| fi ; |
| @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale |
| @if [ "$(findstring _NAND_,$@)" ] ; then \ |
| echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ |
| fi ; |
| |
| MPC8315ERDB_config: unconfig |
| @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale |
| |
| MPC8323ERDB_config: unconfig |
| @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale |
| |
| MPC832XEMDS_config \ |
| MPC832XEMDS_HOST_33_config \ |
| MPC832XEMDS_HOST_66_config \ |
| MPC832XEMDS_SLAVE_config \ |
| MPC832XEMDS_ATM_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _HOST_,$@)" ] ; then \ |
| $(XECHO) -n "... PCI HOST " ; \ |
| echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _SLAVE_,$@)" ] ; then \ |
| $(XECHO) "...PCI SLAVE 66M" ; \ |
| echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _33_,$@)" ] ; then \ |
| $(XECHO) -n "...33M ..." ; \ |
| echo "#define PCI_33M" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _66_,$@)" ] ; then \ |
| $(XECHO) -n "...66M..." ; \ |
| echo "#define PCI_66M" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _ATM_,$@)" ] ; then \ |
| $(XECHO) -n "...ATM..." ; \ |
| echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ |
| fi ; |
| @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale |
| |
| MPC8349EMDS_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale |
| |
| MPC8349ITX_config \ |
| MPC8349ITX_LOWBOOT_config \ |
| MPC8349ITXGP_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/freescale/mpc8349itx |
| @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h |
| @if [ "$(findstring GP,$@)" ] ; then \ |
| echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ |
| fi |
| @if [ "$(findstring LOWBOOT,$@)" ] ; then \ |
| echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ |
| fi |
| @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale |
| |
| MPC8360EMDS_config \ |
| MPC8360EMDS_HOST_33_config \ |
| MPC8360EMDS_HOST_66_config \ |
| MPC8360EMDS_SLAVE_config \ |
| MPC8360EMDS_ATM_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _HOST_,$@)" ] ; then \ |
| $(XECHO) -n "... PCI HOST " ; \ |
| echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _SLAVE_,$@)" ] ; then \ |
| $(XECHO) "...PCI SLAVE 66M" ; \ |
| echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _33_,$@)" ] ; then \ |
| $(XECHO) -n "...33M ..." ; \ |
| echo "#define PCI_33M" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _66_,$@)" ] ; then \ |
| $(XECHO) -n "...66M..." ; \ |
| echo "#define PCI_66M" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _ATM_,$@)" ] ; then \ |
| $(XECHO) -n "...ATM..." ; \ |
| echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ |
| fi ; |
| @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale |
| |
| MPC8360ERDK_33_config \ |
| MPC8360ERDK_66_config \ |
| MPC8360ERDK_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _33_,$@)" ] ; then \ |
| $(XECHO) -n "... CLKIN 33MHz " ; \ |
| echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ |
| fi ; |
| @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale |
| |
| MPC837XEMDS_config \ |
| MPC837XEMDS_HOST_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _HOST_,$@)" ] ; then \ |
| $(XECHO) -n "... PCI HOST " ; \ |
| echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ |
| fi ; |
| @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale |
| |
| MPC837XERDB_config: unconfig |
| @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale |
| |
| MVBLM7_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision |
| |
| sbc8349_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 |
| |
| SIMPC8313_LP_config \ |
| SIMPC8313_SP_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/sheldon/simpc8313 |
| @if [ "$(findstring _LP_,$@)" ] ; then \ |
| $(XECHO) -n "...Large Page NAND..." ; \ |
| echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _SP_,$@)" ] ; then \ |
| $(XECHO) -n "...Small Page NAND..." ; \ |
| echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \ |
| fi ; |
| @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| |
| TQM834x_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc |
| |
| |
| ######################################################################### |
| ## MPC85xx Systems |
| ######################################################################### |
| |
| ATUM8548_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548 |
| |
| MPC8536DS_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8536ds freescale |
| |
| MPC8540ADS_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale |
| |
| MPC8540EVAL_config \ |
| MPC8540EVAL_33_config \ |
| MPC8540EVAL_66_config \ |
| MPC8540EVAL_33_slave_config \ |
| MPC8540EVAL_66_slave_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _33_,$@)" ] ; then \ |
| $(XECHO) "... 33 MHz PCI" ; \ |
| else \ |
| echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ |
| $(XECHO) "... 66 MHz PCI" ; \ |
| fi ; \ |
| if [ "$(findstring _slave_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ |
| $(XECHO) " slave" ; \ |
| else \ |
| $(XECHO) " host" ; \ |
| fi |
| @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval |
| |
| MPC8560ADS_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale |
| |
| MPC8541CDS_legacy_config \ |
| MPC8541CDS_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _legacy_,$@)" ] ; then \ |
| echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ |
| $(XECHO) "... legacy" ; \ |
| fi |
| @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale |
| |
| MPC8544DS_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale |
| |
| MPC8548CDS_legacy_config \ |
| MPC8548CDS_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _legacy_,$@)" ] ; then \ |
| echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ |
| $(XECHO) "... legacy" ; \ |
| fi |
| @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale |
| |
| MPC8555CDS_legacy_config \ |
| MPC8555CDS_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _legacy_,$@)" ] ; then \ |
| echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ |
| $(XECHO) "... legacy" ; \ |
| fi |
| @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale |
| |
| MPC8568MDS_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale |
| |
| MPC8572DS_36BIT_config \ |
| MPC8572DS_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _36BIT_,$@)" ] ; then \ |
| echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ |
| $(XECHO) "... enabling 36-bit physical addressing." ; \ |
| fi |
| @$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale |
| |
| PM854_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 |
| |
| PM856_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856 |
| |
| sbc8540_config \ |
| sbc8540_33_config \ |
| sbc8540_66_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _66_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ |
| $(XECHO) "... 66 MHz PCI" ; \ |
| else \ |
| $(XECHO) "... 33 MHz PCI" ; \ |
| fi |
| @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560 |
| |
| sbc8548_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548 |
| |
| sbc8560_config \ |
| sbc8560_33_config \ |
| sbc8560_66_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _66_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ |
| $(XECHO) "... 66 MHz PCI" ; \ |
| else \ |
| $(XECHO) "... 33 MHz PCI" ; \ |
| fi |
| @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560 |
| |
| socrates_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates |
| |
| stxgp3_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 |
| |
| stxssa_config \ |
| stxssa_4M_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _4M_,$@)" ] ; then \ |
| echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with 4 MiB flash memory" ; \ |
| fi |
| @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa |
| |
| TQM8540_config \ |
| TQM8541_config \ |
| TQM8548_config \ |
| TQM8555_config \ |
| TQM8560_config: unconfig |
| @mkdir -p $(obj)include |
| @CTYPE=$(subst TQM,,$(@:_config=)); \ |
| $(XECHO) "... TQM"$${CTYPE}; \ |
| echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ |
| echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \ |
| echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ |
| echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; |
| @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc |
| |
| XPEDITE5200_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes |
| |
| XPEDITE5370_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes |
| |
| ######################################################################### |
| ## MPC86xx Systems |
| ######################################################################### |
| |
| MPC8610HPCD_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale |
| |
| MPC8641HPCN_36BIT_config \ |
| MPC8641HPCN_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _36BIT_,$@)" ] ; then \ |
| echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ |
| $(XECHO) "... enabling 36-bit physical addressing." ; \ |
| fi |
| @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale |
| |
| sbc8641d_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d |
| |
| ######################################################################### |
| ## 74xx/7xx Systems |
| ######################################################################### |
| |
| AmigaOneG3SE_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI |
| |
| BAB7xx_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec |
| |
| CPCI750_config: unconfig |
| @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd |
| |
| DB64360_config: unconfig |
| @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell |
| |
| DB64460_config: unconfig |
| @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell |
| |
| ELPPC_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec |
| |
| EVB64260_config \ |
| EVB64260_750CX_config: unconfig |
| @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 |
| |
| mpc7448hpc2_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale |
| |
| P3G4_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 |
| |
| p3m750_config \ |
| p3m7448_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring 750_,$@)" ] ; then \ |
| echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive |
| |
| PCIPPC2_config \ |
| PCIPPC6_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 |
| |
| ppmc7xx_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx |
| |
| ZUMA_config: unconfig |
| @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 |
| |
| #======================================================================== |
| # ARM |
| #======================================================================== |
| ######################################################################### |
| ## StrongARM Systems |
| ######################################################################### |
| |
| assabet_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm sa1100 assabet |
| |
| dnp1110_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 |
| |
| gcplus_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus |
| |
| lart_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm sa1100 lart |
| |
| shannon_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm sa1100 shannon |
| |
| ######################################################################### |
| ## ARM92xT Systems |
| ######################################################################### |
| |
| ######################################################################### |
| ## Atmel AT91RM9200 Systems |
| ######################################################################### |
| |
| at91rm9200dk_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 |
| |
| cmc_pu2_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 |
| |
| csb637_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 |
| |
| kb9202_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 |
| |
| m501sk_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 |
| |
| mp2usb_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 |
| |
| ######################################################################### |
| ## Atmel ARM926EJ-S Systems |
| ######################################################################### |
| |
| afeb9260_config: unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91 |
| |
| at91cap9adk_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91 |
| |
| at91sam9260ek_nandflash_config \ |
| at91sam9260ek_dataflash_cs0_config \ |
| at91sam9260ek_dataflash_cs1_config \ |
| at91sam9260ek_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in NAND FLASH" ; \ |
| elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ |
| else \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ |
| fi; |
| @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 |
| |
| at91sam9xeek_nandflash_config \ |
| at91sam9xeek_dataflash_cs0_config \ |
| at91sam9xeek_dataflash_cs1_config \ |
| at91sam9xeek_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in NAND FLASH" ; \ |
| elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ |
| else \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ |
| fi; |
| @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9 |
| |
| at91sam9261ek_nandflash_config \ |
| at91sam9261ek_dataflash_cs0_config \ |
| at91sam9261ek_dataflash_cs3_config \ |
| at91sam9261ek_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in NAND FLASH" ; \ |
| elif [ "$(findstring dataflash_cs3,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ |
| else \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ |
| fi; |
| @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 |
| |
| at91sam9263ek_nandflash_config \ |
| at91sam9263ek_dataflash_config \ |
| at91sam9263ek_dataflash_cs0_config \ |
| at91sam9263ek_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in NAND FLASH" ; \ |
| else \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ |
| fi; |
| @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 |
| |
| at91sam9rlek_nandflash_config \ |
| at91sam9rlek_dataflash_config \ |
| at91sam9rlek_dataflash_cs0_config \ |
| at91sam9rlek_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in NAND FLASH" ; \ |
| else \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ |
| fi; |
| @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 |
| |
| ######################################################################## |
| ## ARM Integrator boards - see doc/README-integrator for more info. |
| integratorap_config \ |
| ap_config \ |
| ap966_config \ |
| ap922_config \ |
| ap922_XA10_config \ |
| ap7_config \ |
| ap720t_config \ |
| ap920t_config \ |
| ap926ejs_config \ |
| ap946es_config: unconfig |
| @board/integratorap/split_by_variant.sh $@ |
| |
| integratorcp_config \ |
| cp_config \ |
| cp920t_config \ |
| cp926ejs_config \ |
| cp946es_config \ |
| cp1136_config \ |
| cp966_config \ |
| cp922_config \ |
| cp922_XA10_config \ |
| cp1026_config: unconfig |
| @board/integratorcp/split_by_variant.sh $@ |
| |
| davinci_dvevm_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci |
| |
| davinci_schmoogie_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci |
| |
| davinci_sffsdr_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci |
| |
| davinci_sonata_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci |
| |
| lpd7a400_config \ |
| lpd7a404_config: unconfig |
| @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x |
| |
| mx1ads_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx |
| |
| mx1fs2_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx |
| |
| netstar_config: unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm925t netstar |
| |
| nmdk8815_config \ |
| nmdk8815_onenand_config: unconfig |
| @mkdir -p $(obj)include |
| @ > $(obj)include/config.h |
| @if [ "$(findstring _onenand, $@)" ] ; then \ |
| echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ |
| $(XECHO) "... configured for OneNand Flash"; \ |
| else \ |
| $(XECHO) "... configured for Nand Flash"; \ |
| fi |
| @$(MKCONFIG) -a nmdk8815 arm arm926ejs nmdk8815 st nomadik |
| |
| omap1510inn_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn |
| |
| xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) |
| |
| omap1610inn_config \ |
| omap1610inn_cs0boot_config \ |
| omap1610inn_cs3boot_config \ |
| omap1610inn_cs_autoboot_config \ |
| omap1610h2_config \ |
| omap1610h2_cs0boot_config \ |
| omap1610h2_cs3boot_config \ |
| omap1610h2_cs_autoboot_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _cs0boot_, $@)" ] ; then \ |
| echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ |
| $(XECHO) "... configured for CS0 boot"; \ |
| elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ |
| echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ |
| $(XECHO) "... configured for CS_AUTO boot"; \ |
| else \ |
| echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ |
| $(XECHO) "... configured for CS3 boot"; \ |
| fi; |
| @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap |
| |
| omap5912osk_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap |
| |
| xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) |
| |
| omap730p2_config \ |
| omap730p2_cs0boot_config \ |
| omap730p2_cs3boot_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _cs0boot_, $@)" ] ; then \ |
| echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ |
| $(XECHO) "... configured for CS0 boot"; \ |
| else \ |
| echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ |
| $(XECHO) "... configured for CS3 boot"; \ |
| fi; |
| @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap |
| |
| sbc2410x_config: unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 |
| |
| scb9328_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx |
| |
| smdk2400_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 |
| |
| smdk2410_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 |
| |
| SX1_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm925t sx1 |
| |
| # TRAB default configuration: 8 MB Flash, 32 MB RAM |
| xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) |
| |
| trab_config \ |
| trab_bigram_config \ |
| trab_bigflash_config \ |
| trab_old_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/trab |
| @[ -z "$(findstring _bigram,$@)" ] || \ |
| { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \ |
| } |
| @[ -z "$(findstring _bigflash,$@)" ] || \ |
| { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \ |
| echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ |
| } |
| @[ -z "$(findstring _old,$@)" ] || \ |
| { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \ |
| echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ |
| } |
| @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 |
| |
| VCMA9_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 |
| |
| ######################################################################### |
| # ARM supplied Versatile development boards |
| ######################################################################### |
| |
| cm4008_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 |
| |
| cm41xx_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 |
| |
| versatile_config \ |
| versatileab_config \ |
| versatilepb_config : unconfig |
| @board/versatile/split_by_variant.sh $@ |
| |
| voiceblue_config: unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue |
| |
| ######################################################################### |
| ## S3C44B0 Systems |
| ######################################################################### |
| |
| B2_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave |
| |
| ######################################################################### |
| ## ARM720T Systems |
| ######################################################################### |
| |
| armadillo_config: unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm720t armadillo |
| |
| ep7312_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 |
| |
| impa7_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm720t impa7 |
| |
| modnet50_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 |
| |
| evb4510_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 |
| |
| lpc2292sodimm_config: unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 |
| |
| SMN42_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 |
| |
| ######################################################################### |
| ## XScale Systems |
| ######################################################################### |
| |
| actux1_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm ixp actux1 |
| |
| actux2_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm ixp actux2 |
| |
| actux3_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm ixp actux3 |
| |
| actux4_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm ixp actux4 |
| |
| cerf250_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa cerf250 |
| |
| cradle_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa cradle |
| |
| csb226_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa csb226 |
| |
| delta_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa delta |
| |
| innokom_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa innokom |
| |
| ixdp425_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 |
| |
| ixdpg425_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 |
| |
| lubbock_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa lubbock |
| |
| pleb2_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa pleb2 |
| |
| logodl_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa logodl |
| |
| pdnb3_config \ |
| scpu_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring scpu_,$@)" ] ; then \ |
| echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ |
| $(XECHO) "... on SCPU board variant" ; \ |
| fi |
| @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive |
| |
| pxa255_idp_config: unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp |
| |
| trizepsiv_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv |
| |
| wepep250_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa wepep250 |
| |
| xaeniax_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa xaeniax |
| |
| xm250_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa xm250 |
| |
| xsengine_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm pxa xsengine |
| |
| zylonite_config : |
| @$(MKCONFIG) $(@:_config=) arm pxa zylonite |
| |
| ######################################################################### |
| ## ARM1136 Systems |
| ######################################################################### |
| |
| apollon_config : unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)onenand_ipl/board/apollon |
| @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h |
| @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx |
| @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk |
| |
| imx31_litekit_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31 |
| |
| imx31_phycore_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31 |
| |
| mx31ads_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 |
| |
| omap2420h4_config : unconfig |
| @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx |
| |
| ######################################################################### |
| ## ARM1176 Systems |
| ######################################################################### |
| smdk6400_noUSB_config \ |
| smdk6400_config : unconfig |
| @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 |
| @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ |
| echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ |
| $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \ |
| else \ |
| echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ |
| $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \ |
| fi |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| |
| #======================================================================== |
| # i386 |
| #======================================================================== |
| ######################################################################### |
| ## AMD SC520 CDP |
| ######################################################################### |
| eNET_config : unconfig |
| @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520 |
| |
| sc520_cdp_config : unconfig |
| @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520 |
| |
| sc520_spunk_config : unconfig |
| @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 |
| |
| sc520_spunk_rel_config : unconfig |
| @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 |
| |
| #======================================================================== |
| # MIPS |
| #======================================================================== |
| ######################################################################### |
| ## MIPS32 4Kc |
| ######################################################################### |
| |
| xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) |
| |
| incaip_100MHz_config \ |
| incaip_133MHz_config \ |
| incaip_150MHz_config \ |
| incaip_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _100MHz,$@)" ] || \ |
| { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with 100MHz system clock" ; \ |
| } |
| @[ -z "$(findstring _133MHz,$@)" ] || \ |
| { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with 133MHz system clock" ; \ |
| } |
| @[ -z "$(findstring _150MHz,$@)" ] || \ |
| { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ |
| $(XECHO) "... with 150MHz system clock" ; \ |
| } |
| @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip |
| |
| tb0229_config: unconfig |
| @$(MKCONFIG) $(@:_config=) mips mips tb0229 |
| |
| ######################################################################### |
| ## MIPS32 AU1X00 |
| ######################################################################### |
| |
| dbau1000_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| |
| dbau1100_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| |
| dbau1500_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| |
| dbau1550_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| |
| dbau1550_el_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| |
| gth2_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a gth2 mips mips gth2 |
| |
| pb1000_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a pb1x00 mips mips pb1x00 |
| |
| qemu_mips_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a qemu-mips mips mips qemu-mips |
| |
| ######################################################################### |
| ## MIPS64 5Kc |
| ######################################################################### |
| |
| purple_config : unconfig |
| @$(MKCONFIG) $(@:_config=) mips mips purple |
| |
| #======================================================================== |
| # Nios |
| #======================================================================== |
| ######################################################################### |
| ## Nios32 |
| ######################################################################### |
| |
| ADNPESC1_DNPEVA2_base_32_config \ |
| ADNPESC1_base_32_config \ |
| ADNPESC1_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _DNPEVA2,$@)" ] || \ |
| { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... DNP/EVA2 configuration" ; \ |
| } |
| @[ -z "$(findstring _base_32,$@)" ] || \ |
| { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... NIOS 'base_32' configuration" ; \ |
| } |
| @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ |
| { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ |
| } |
| @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv |
| |
| DK1C20_safe_32_config \ |
| DK1C20_standard_32_config \ |
| DK1C20_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _safe_32,$@)" ] || \ |
| { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... NIOS 'safe_32' configuration" ; \ |
| } |
| @[ -z "$(findstring _standard_32,$@)" ] || \ |
| { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... NIOS 'standard_32' configuration" ; \ |
| } |
| @[ -z "$(findstring DK1C20_config,$@)" ] || \ |
| { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ |
| } |
| @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera |
| |
| DK1S10_safe_32_config \ |
| DK1S10_standard_32_config \ |
| DK1S10_mtx_ldk_20_config \ |
| DK1S10_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _safe_32,$@)" ] || \ |
| { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... NIOS 'safe_32' configuration" ; \ |
| } |
| @[ -z "$(findstring _standard_32,$@)" ] || \ |
| { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... NIOS 'standard_32' configuration" ; \ |
| } |
| @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ |
| { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \ |
| } |
| @[ -z "$(findstring DK1S10_config,$@)" ] || \ |
| { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ |
| $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ |
| } |
| @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera |
| |
| ######################################################################### |
| ## Nios-II |
| ######################################################################### |
| |
| EP1C20_config : unconfig |
| @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera |
| |
| EP1S10_config : unconfig |
| @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera |
| |
| EP1S40_config : unconfig |
| @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera |
| |
| PK1C20_config : unconfig |
| @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent |
| |
| PCI5441_config : unconfig |
| @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent |
| |
| #======================================================================== |
| ## Microblaze |
| #======================================================================== |
| |
| microblaze-generic_config: unconfig |
| @mkdir -p $(obj)include |
| @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx |
| |
| suzaku_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno |
| |
| #======================================================================== |
| # Blackfin |
| #======================================================================== |
| |
| # Analog Devices boards |
| BFIN_BOARDS = bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit |
| |
| $(BFIN_BOARDS:%=%_config) : unconfig |
| @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) |
| |
| $(BFIN_BOARDS): |
| $(MAKE) $@_config |
| $(MAKE) |
| |
| #======================================================================== |
| # AVR32 |
| #======================================================================== |
| |
| atngw100_config : unconfig |
| @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x |
| |
| atstk1002_config : unconfig |
| @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x |
| |
| atstk1003_config : unconfig |
| @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x |
| |
| atstk1004_config : unconfig |
| @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x |
| |
| atstk1006_config : unconfig |
| @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x |
| |
| favr-32-ezkit_config : unconfig |
| @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x |
| |
| hammerhead_config : unconfig |
| @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x |
| |
| mimc200_config : unconfig |
| @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x |
| |
| #======================================================================== |
| # SH3 (SuperH) |
| #======================================================================== |
| |
| ######################################################################### |
| ## sh2 (Renesas SuperH) |
| ######################################################################### |
| rsk7203_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_RSK7203 1" > $(obj)/include/config.h |
| @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas |
| |
| ######################################################################### |
| ## sh3 (Renesas SuperH) |
| ######################################################################### |
| |
| mpr2_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 |
| |
| ms7720se_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se |
| |
| ######################################################################### |
| ## sh4 (Renesas SuperH) |
| ######################################################################### |
| |
| MigoR_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas |
| |
| ms7750se_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se |
| |
| ms7722se_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se |
| |
| r2dplus_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas |
| |
| r7780mp_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas |
| |
| sh7763rdp_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas |
| |
| sh7785lcr_config : unconfig |
| @ >include/config.h |
| @echo "#define CONFIG_SH7785LCR 1" >> include/config.h |
| @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr renesas |
| |
| ap325rxa_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas |
| |
| #======================================================================== |
| # SPARC |
| #======================================================================== |
| |
| ######################################################################### |
| ## LEON3 |
| ######################################################################### |
| |
| # Gaisler GR-XC3S-1500 board |
| gr_xc3s_1500_config : unconfig |
| @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler |
| |
| # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system |
| gr_cpci_ax2000_config : unconfig |
| @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler |
| |
| # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS |
| # Development board Stratix II edition, FPGA Device EP2S60. |
| gr_ep2s60_config: unconfig |
| @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler |
| |
| # Gaisler LEON3 GRSIM simulator |
| grsim_config : unconfig |
| @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler |
| |
| ######################################################################### |
| ## LEON2 |
| ######################################################################### |
| |
| # Gaisler LEON2 GRSIM simulator |
| grsim_leon2_config : unconfig |
| @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler |
| |
| ######################################################################### |
| ######################################################################### |
| ######################################################################### |
| |
| clean: |
| @rm -f $(obj)examples/82559_eeprom $(obj)examples/eepro100_eeprom \ |
| $(obj)examples/hello_world $(obj)examples/interrupt \ |
| $(obj)examples/mem_to_mem_idma2intr \ |
| $(obj)examples/sched $(obj)examples/smc91111_eeprom \ |
| $(obj)examples/test_burst $(obj)examples/timer |
| @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ |
| $(obj)tools/env/{fw_printenv,fw_setenv} \ |
| $(obj)tools/envcrc \ |
| $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ |
| $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ |
| $(obj)tools/mkimage $(obj)tools/mpc86x_clk \ |
| $(obj)tools/ncb $(obj)tools/ubsha1 |
| @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ |
| $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ |
| $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ |
| $(obj)board/{integratorap,integratorcp}/u-boot.lds \ |
| $(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \ |
| $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] |
| @rm -f $(obj)include/bmp_logo.h |
| @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map} |
| @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} |
| @rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE) |
| @find $(OBJTREE) -type f \ |
| \( -name 'core' -o -name '*.bak' -o -name '*~' \ |
| -o -name '*.o' -o -name '*.a' \) -print \ |
| | xargs rm -f |
| |
| clobber: clean |
| @find $(OBJTREE) -type f \( -name .depend \ |
| -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ |
| -print0 \ |
| | xargs -0 rm -f |
| @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ |
| $(obj)cscope.* $(obj)*.*~ |
| @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) |
| @rm -f $(obj)tools/{crc32.c,env_embedded.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes} |
| @rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h} |
| @rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h} |
| @rm -f $(obj)cpu/mpc824x/bedbug_603e.c |
| @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm |
| @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f |
| @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f |
| @[ ! -d $(obj)api_examples ] || find $(obj)api_examples -name "*" -type l -print | xargs rm -f |
| |
| ifeq ($(OBJTREE),$(SRCTREE)) |
| mrproper \ |
| distclean: clobber unconfig |
| else |
| mrproper \ |
| distclean: clobber unconfig |
| rm -rf $(obj)* |
| endif |
| |
| backup: |
| F=`basename $(TOPDIR)` ; cd .. ; \ |
| gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F |
| |
| ######################################################################### |