dm: regulator: support regulator more state
support parse regulator standard property:
regulator-off-in-suspend;
regulator-init-microvolt;
regulator-suspend-microvolt:
regulator_get_suspend_enable
regulator_set_suspend_enable
regulator_get_suspend_value
regulator_set_suspend_value
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/include/power/regulator.h b/include/power/regulator.h
index 6c6e2cd..74938dd 100644
--- a/include/power/regulator.h
+++ b/include/power/regulator.h
@@ -168,6 +168,7 @@
int mode_count;
int min_uV;
int max_uV;
+ int init_uV;
int min_uA;
int max_uA;
unsigned int ramp_delay;
@@ -177,6 +178,8 @@
int flags;
u8 ctrl_reg;
u8 volt_reg;
+ bool suspend_on;
+ u32 suspend_uV;
};
/* Regulator device operations */
@@ -194,6 +197,19 @@
int (*set_value)(struct udevice *dev, int uV);
/**
+ * The regulator suspend output value function calls operates
+ * on a micro Volts.
+ *
+ * get/set_suspen_value - get/set suspend mode output value
+ * @dev - regulator device
+ * Sets:
+ * @uV - set the suspend output value [micro Volts]
+ * @return output value [uV] on success or negative errno if fail.
+ */
+ int (*set_suspend_value)(struct udevice *dev, int uV);
+ int (*get_suspend_value)(struct udevice *dev);
+
+ /**
* The regulator output current function calls operates on a micro Amps.
*
* get/set_current - get/set output current of the given output number
@@ -218,6 +234,19 @@
int (*set_enable)(struct udevice *dev, bool enable);
/**
+ * The most basic feature of the regulator output is its enable state
+ * in suspend mode.
+ *
+ * get/set_suspend_enable - get/set enable state of the suspend output
+ * @dev - regulator device
+ * Sets:
+ * @enable - set true - enable or false - disable
+ * @return true/false for get or -errno if fail; 0 / -errno for set.
+ */
+ int (*set_suspend_enable)(struct udevice *dev, bool enable);
+ int (*get_suspend_enable)(struct udevice *dev);
+
+ /**
* The 'get/set_mode()' function calls should operate on a driver-
* specific mode id definitions, which should be found in:
* field 'id' of struct dm_regulator_mode.
@@ -262,6 +291,23 @@
int regulator_set_value(struct udevice *dev, int uV);
/**
+ * regulator_set_suspend_value: set the suspend microvoltage value of a given regulator.
+ *
+ * @dev - pointer to the regulator device
+ * @uV - the output suspend value to set [micro Volts]
+ * @return - 0 on success or -errno val if fails
+ */
+int regulator_set_suspend_value(struct udevice *dev, int uV);
+
+/**
+ * regulator_get_suspend_value: get the suspend microvoltage value of a given regulator.
+ *
+ * @dev - pointer to the regulator device
+ * @return - positive output value [uV] on success or negative errno if fail.
+ */
+int regulator_get_suspend_value(struct udevice *dev);
+
+/**
* regulator_set_value_force: set the microvoltage value of a given regulator
* without any min-,max condition check
*
@@ -317,6 +363,23 @@
int regulator_set_enable_if_allowed(struct udevice *dev, bool enable);
/**
+ * regulator_set_suspend_enable: set regulator suspend enable state
+ *
+ * @dev - pointer to the regulator device
+ * @enable - set true or false
+ * @return - 0 on success or -errno val if fails
+ */
+int regulator_set_suspend_enable(struct udevice *dev, bool enable);
+
+/**
+ * regulator_get_suspend_enable: get regulator suspend enable state
+ *
+ * @dev - pointer to the regulator device
+ * @return - true/false of enable state or -errno val if fails
+ */
+int regulator_get_suspend_enable(struct udevice *dev);
+
+/**
* regulator_get_mode: get active operation mode id of a given regulator
*
* @dev - pointer to the regulator device