diff --git a/include/power/regulator.h b/include/power/regulator.h
index 6c6e2cd..74938dd 100644
--- a/include/power/regulator.h
+++ b/include/power/regulator.h
@@ -168,6 +168,7 @@
 	int mode_count;
 	int min_uV;
 	int max_uV;
+	int init_uV;
 	int min_uA;
 	int max_uA;
 	unsigned int ramp_delay;
@@ -177,6 +178,8 @@
 	int flags;
 	u8 ctrl_reg;
 	u8 volt_reg;
+	bool suspend_on;
+	u32 suspend_uV;
 };
 
 /* Regulator device operations */
@@ -194,6 +197,19 @@
 	int (*set_value)(struct udevice *dev, int uV);
 
 	/**
+	 * The regulator suspend output value function calls operates
+	 * on a micro Volts.
+	 *
+	 * get/set_suspen_value - get/set suspend mode output value
+	 * @dev          - regulator device
+	 * Sets:
+	 * @uV           - set the suspend output value [micro Volts]
+	 * @return output value [uV] on success or negative errno if fail.
+	 */
+	int (*set_suspend_value)(struct udevice *dev, int uV);
+	int (*get_suspend_value)(struct udevice *dev);
+
+	/**
 	 * The regulator output current function calls operates on a micro Amps.
 	 *
 	 * get/set_current - get/set output current of the given output number
@@ -218,6 +234,19 @@
 	int (*set_enable)(struct udevice *dev, bool enable);
 
 	/**
+	 * The most basic feature of the regulator output is its enable state
+	 * in suspend mode.
+	 *
+	 * get/set_suspend_enable - get/set enable state of the suspend output
+	 * @dev           - regulator device
+	 * Sets:
+	 * @enable         - set true - enable or false - disable
+	 * @return true/false for get or -errno if fail; 0 / -errno for set.
+	 */
+	int (*set_suspend_enable)(struct udevice *dev, bool enable);
+	int (*get_suspend_enable)(struct udevice *dev);
+
+	/**
 	 * The 'get/set_mode()' function calls should operate on a driver-
 	 * specific mode id definitions, which should be found in:
 	 * field 'id' of struct dm_regulator_mode.
@@ -262,6 +291,23 @@
 int regulator_set_value(struct udevice *dev, int uV);
 
 /**
+ * regulator_set_suspend_value: set the suspend microvoltage value of a given regulator.
+ *
+ * @dev    - pointer to the regulator device
+ * @uV     - the output suspend value to set [micro Volts]
+ * @return - 0 on success or -errno val if fails
+ */
+int regulator_set_suspend_value(struct udevice *dev, int uV);
+
+/**
+ * regulator_get_suspend_value: get the suspend microvoltage value of a given regulator.
+ *
+ * @dev    - pointer to the regulator device
+ * @return - positive output value [uV] on success or negative errno if fail.
+ */
+int regulator_get_suspend_value(struct udevice *dev);
+
+/**
  * regulator_set_value_force: set the microvoltage value of a given regulator
  *			      without any min-,max condition check
  *
@@ -317,6 +363,23 @@
 int regulator_set_enable_if_allowed(struct udevice *dev, bool enable);
 
 /**
+ * regulator_set_suspend_enable: set regulator suspend enable state
+ *
+ * @dev    - pointer to the regulator device
+ * @enable - set true or false
+ * @return - 0 on success or -errno val if fails
+ */
+int regulator_set_suspend_enable(struct udevice *dev, bool enable);
+
+/**
+ * regulator_get_suspend_enable: get regulator suspend enable state
+ *
+ * @dev    - pointer to the regulator device
+ * @return - true/false of enable state or -errno val if fails
+ */
+int regulator_get_suspend_enable(struct udevice *dev);
+
+/**
  * regulator_get_mode: get active operation mode id of a given regulator
  *
  * @dev    - pointer to the regulator device