| // SPDX-License-Identifier: GPL-2.0+ OR X11 |
| /* |
| * P2020 Silicon/SoC Device Tree Source (post include) |
| * |
| * Copyright 2013 Freescale Semiconductor Inc. |
| * Copyright 2019 NXP |
| */ |
| |
| &soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "fsl,p2020-immr", "simple-bus"; |
| bus-frequency = <0x0>; |
| |
| usb@22000 { |
| compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; |
| reg = <0x22000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <28 0x2 0 0>; |
| phy_type = "ulpi"; |
| }; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <4>; |
| reg = <0x40000 0x40000>; |
| compatible = "fsl,mpic"; |
| device_type = "open-pic"; |
| big-endian; |
| single-cpu-affinity; |
| last-interrupt-source = <255>; |
| }; |
| |
| esdhc: sdhc@2e000 { |
| compatible = "fsl,p2020-esdhc", "fsl,esdhc"; |
| reg = <0x2e000 0x1000>; |
| interrupts = <72 0x2 0 0>; |
| /* Filled in by U-Boot */ |
| clock-frequency = <0>; |
| }; |
| |
| espi0: spi@7000 { |
| compatible = "fsl,mpc8536-espi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x7000 0x1000>; |
| interrupts = < 0x3b 0x02 0x00 0x00 >; |
| fsl,espi-num-chipselects = <4>; |
| }; |
| |
| /include/ "pq3-i2c-0.dtsi" |
| /include/ "pq3-i2c-1.dtsi" |
| /include/ "pq3-duart-0.dtsi" |
| /include/ "pq3-gpio-0.dtsi" |
| |
| L2: l2-cache-controller@20000 { |
| compatible = "fsl,p2020-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| cache-line-size = <32>; /* 32 bytes */ |
| cache-size = <0x80000>; /* L2,512K */ |
| interrupts = <16 2 0 0>; |
| }; |
| |
| /include/ "pq3-etsec1-0.dtsi" |
| /include/ "pq3-etsec1-timer-0.dtsi" |
| |
| ptp_clock@24e00 { |
| interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>; |
| }; |
| |
| /include/ "pq3-etsec1-1.dtsi" |
| /include/ "pq3-etsec1-2.dtsi" |
| }; |
| |
| /* PCIe controller base address 0x8000 */ |
| &pci2 { |
| compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq", "fsl,mpc8548-pcie"; |
| law_trgt_if = <0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| clock-frequency = <33333333>; |
| interrupts = <24 2 0 0>; |
| |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <24 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 |
| >; |
| }; |
| }; |
| |
| /* PCIe controller base address 0x9000 */ |
| &pci1 { |
| compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq", "fsl,mpc8548-pcie"; |
| law_trgt_if = <1>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| clock-frequency = <33333333>; |
| interrupts = <25 2 0 0>; |
| |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <25 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 |
| >; |
| }; |
| }; |
| |
| /* PCIe controller base address 0xa000 */ |
| &pci0 { |
| compatible = "fsl,pcie-p1_p2", "fsl,pcie-fsl-qoriq", "fsl,mpc8548-pcie"; |
| law_trgt_if = <2>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| bus-range = <0x0 0xff>; |
| clock-frequency = <33333333>; |
| interrupts = <26 2 0 0>; |
| |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <26 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 |
| >; |
| }; |
| }; |
| |
| &lbc { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus"; |
| interrupts = <19 2 0 0>; |
| }; |