board/ti/am57xx/board.c - filogic/uboot - Gitiles

 /*
  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
  *
  * Author: Felipe Balbi <balbi@ti.com>
  *
  * Based on board/ti/dra7xx/evm.c
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <palmas.h>
 #include <sata.h>
 #include <usb.h>
 #include <asm/omap_common.h>
 #include <asm/emif.h>
 #include <asm/gpio.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/dra7xx_iodelay.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/sata.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/omap.h>
 #include <environment.h>
 #include <usb.h>
 #include <linux/usb/gadget.h>
 #include <dwc3-uboot.h>
 #include <dwc3-omap-uboot.h>
 #include <ti-usb-phy-uboot.h>

 #include "../common/board_detect.h"
 #include "mux_data.h"

 #define board_is_x15()		board_ti_is("BBRDX15_")
 #define board_is_am572x_evm()	board_ti_is("AM572PM_")
 #define board_is_am572x_idk()	board_ti_is("AM572IDK")

 #ifdef CONFIG_DRIVER_TI_CPSW
 #include <cpsw.h>
 #endif

 DECLARE_GLOBAL_DATA_PTR;

 /* GPIO 7_11 */
 #define GPIO_DDR_VTT_EN 203

 #define SYSINFO_BOARD_NAME_MAX_LEN	45

 const struct omap_sysinfo sysinfo = {
 	"Board: UNKNOWN(BeagleBoard X15?) REV UNKNOWN\n"
 };

 static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
 	.dmm_lisa_map_3 = 0x80740300,
 	.is_ma_present  = 0x1
 };

 void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
 {
 	*dmm_lisa_regs = &beagle_x15_lisa_regs;
 }

 static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = {
 	.sdram_config_init		= 0x61851b32,
 	.sdram_config			= 0x61851b32,
 	.sdram_config2			= 0x08000000,
 	.ref_ctrl			= 0x000040F1,
 	.ref_ctrl_final			= 0x00001035,
 	.sdram_tim1			= 0xcccf36ab,
 	.sdram_tim2			= 0x308f7fda,
 	.sdram_tim3			= 0x409f88a8,
 	.read_idle_ctrl			= 0x00050000,
 	.zq_config			= 0x5007190b,
 	.temp_alert_config		= 0x00000000,
 	.emif_ddr_phy_ctlr_1_init 	= 0x0024400b,
 	.emif_ddr_phy_ctlr_1		= 0x0e24400b,
 	.emif_ddr_ext_phy_ctrl_1 	= 0x10040100,
 	.emif_ddr_ext_phy_ctrl_2 	= 0x00910091,
 	.emif_ddr_ext_phy_ctrl_3 	= 0x00950095,
 	.emif_ddr_ext_phy_ctrl_4 	= 0x009b009b,
 	.emif_ddr_ext_phy_ctrl_5 	= 0x009e009e,
 	.emif_rd_wr_lvl_rmp_win		= 0x00000000,
 	.emif_rd_wr_lvl_rmp_ctl		= 0x80000000,
 	.emif_rd_wr_lvl_ctl		= 0x00000000,
 	.emif_rd_wr_exec_thresh		= 0x00000305
 };

 /* Ext phy ctrl regs 1-35 */
 static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = {
 	0x10040100,
 	0x00910091,
 	0x00950095,
 	0x009B009B,
 	0x009E009E,
 	0x00980098,
 	0x00340034,
 	0x00350035,
 	0x00340034,
 	0x00310031,
 	0x00340034,
 	0x007F007F,
 	0x007F007F,
 	0x007F007F,
 	0x007F007F,
 	0x007F007F,
 	0x00480048,
 	0x004A004A,
 	0x00520052,
 	0x00550055,
 	0x00500050,
 	0x00000000,
 	0x00600020,
 	0x40011080,
 	0x08102040,
 	0x0,
 	0x0,
 	0x0,
 	0x0,
 	0x0,
 	0x0,
 	0x0,
 	0x0,
 	0x0,
 	0x0
 };

 static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = {
 	.sdram_config_init		= 0x61851b32,
 	.sdram_config			= 0x61851b32,
 	.sdram_config2			= 0x08000000,
 	.ref_ctrl			= 0x000040F1,
 	.ref_ctrl_final			= 0x00001035,
 	.sdram_tim1			= 0xcccf36b3,
 	.sdram_tim2			= 0x308f7fda,
 	.sdram_tim3			= 0x407f88a8,
 	.read_idle_ctrl			= 0x00050000,
 	.zq_config			= 0x5007190b,
 	.temp_alert_config		= 0x00000000,
 	.emif_ddr_phy_ctlr_1_init 	= 0x0024400b,
 	.emif_ddr_phy_ctlr_1		= 0x0e24400b,
 	.emif_ddr_ext_phy_ctrl_1 	= 0x10040100,
 	.emif_ddr_ext_phy_ctrl_2 	= 0x00910091,
 	.emif_ddr_ext_phy_ctrl_3 	= 0x00950095,
 	.emif_ddr_ext_phy_ctrl_4 	= 0x009b009b,
 	.emif_ddr_ext_phy_ctrl_5 	= 0x009e009e,
 	.emif_rd_wr_lvl_rmp_win		= 0x00000000,
 	.emif_rd_wr_lvl_rmp_ctl		= 0x80000000,
 	.emif_rd_wr_lvl_ctl		= 0x00000000,
 	.emif_rd_wr_exec_thresh		= 0x00000305
 };

 static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = {
 	0x10040100,
 	0x00910091,
 	0x00950095,
 	0x009B009B,
 	0x009E009E,
 	0x00980098,
 	0x00340034,
 	0x00350035,
 	0x00340034,
 	0x00310031,
 	0x00340034,
 	0x007F007F,
 	0x007F007F,
 	0x007F007F,
 	0x007F007F,
 	0x007F007F,
 	0x00480048,
 	0x004A004A,
 	0x00520052,
 	0x00550055,
 	0x00500050,
 	0x00000000,
 	0x00600020,
 	0x40011080,
 	0x08102040,
 	0x0,
 	0x0,
 	0x0,
 	0x0,
 	0x0,
 	0x0,
 	0x0,
 	0x0,
 	0x0,
 	0x0
 };

 void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
 {
 	switch (emif_nr) {
 	case 1:
 		*regs = &beagle_x15_emif1_ddr3_532mhz_emif_regs;
 		break;
 	case 2:
 		*regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs;
 		break;
 	}
 }

 void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size)
 {
 	switch (emif_nr) {
 	case 1:
 		*regs = beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs;
 		*size = ARRAY_SIZE(beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs);
 		break;
 	case 2:
 		*regs = beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs;
 		*size = ARRAY_SIZE(beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs);
 		break;
 	}
 }

 struct vcores_data beagle_x15_volts = {
 	.mpu.value		= VDD_MPU_DRA7,
 	.mpu.efuse.reg		= STD_FUSE_OPP_VMIN_MPU,
 	.mpu.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
 	.mpu.addr		= TPS659038_REG_ADDR_SMPS12,
 	.mpu.pmic		= &tps659038,
 	.mpu.abb_tx_done_mask	= OMAP_ABB_MPU_TXDONE_MASK,

 	.eve.value		= VDD_EVE_DRA7,
 	.eve.efuse.reg		= STD_FUSE_OPP_VMIN_DSPEVE,
 	.eve.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
 	.eve.addr		= TPS659038_REG_ADDR_SMPS45,
 	.eve.pmic		= &tps659038,
 	.eve.abb_tx_done_mask	= OMAP_ABB_EVE_TXDONE_MASK,

 	.gpu.value		= VDD_GPU_DRA7,
 	.gpu.efuse.reg		= STD_FUSE_OPP_VMIN_GPU,
 	.gpu.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
 	.gpu.addr		= TPS659038_REG_ADDR_SMPS45,
 	.gpu.pmic		= &tps659038,
 	.gpu.abb_tx_done_mask	= OMAP_ABB_GPU_TXDONE_MASK,

 	.core.value		= VDD_CORE_DRA7,
 	.core.efuse.reg		= STD_FUSE_OPP_VMIN_CORE,
 	.core.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
 	.core.addr		= TPS659038_REG_ADDR_SMPS6,
 	.core.pmic		= &tps659038,

 	.iva.value		= VDD_IVA_DRA7,
 	.iva.efuse.reg		= STD_FUSE_OPP_VMIN_IVA,
 	.iva.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
 	.iva.addr		= TPS659038_REG_ADDR_SMPS45,
 	.iva.pmic		= &tps659038,
 	.iva.abb_tx_done_mask	= OMAP_ABB_IVA_TXDONE_MASK,
 };

 struct vcores_data am572x_idk_volts = {
 	.mpu.value		= VDD_MPU_DRA7,
 	.mpu.efuse.reg		= STD_FUSE_OPP_VMIN_MPU,
 	.mpu.efuse.reg_bits     = DRA752_EFUSE_REGBITS,
 	.mpu.addr		= TPS659038_REG_ADDR_SMPS12,
 	.mpu.pmic		= &tps659038,
 	.mpu.abb_tx_done_mask	= OMAP_ABB_MPU_TXDONE_MASK,

 	.eve.value		= VDD_EVE_DRA7,
 	.eve.efuse.reg		= STD_FUSE_OPP_VMIN_DSPEVE,
 	.eve.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
 	.eve.addr		= TPS659038_REG_ADDR_SMPS45,
 	.eve.pmic		= &tps659038,
 	.eve.abb_tx_done_mask	= OMAP_ABB_EVE_TXDONE_MASK,

 	.gpu.value		= VDD_GPU_DRA7,
 	.gpu.efuse.reg		= STD_FUSE_OPP_VMIN_GPU,
 	.gpu.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
 	.gpu.addr		= TPS659038_REG_ADDR_SMPS6,
 	.gpu.pmic		= &tps659038,
 	.gpu.abb_tx_done_mask	= OMAP_ABB_GPU_TXDONE_MASK,

 	.core.value		= VDD_CORE_DRA7,
 	.core.efuse.reg		= STD_FUSE_OPP_VMIN_CORE,
 	.core.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
 	.core.addr		= TPS659038_REG_ADDR_SMPS7,
 	.core.pmic		= &tps659038,

 	.iva.value		= VDD_IVA_DRA7,
 	.iva.efuse.reg		= STD_FUSE_OPP_VMIN_IVA,
 	.iva.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
 	.iva.addr		= TPS659038_REG_ADDR_SMPS8,
 	.iva.pmic		= &tps659038,
 	.iva.abb_tx_done_mask	= OMAP_ABB_IVA_TXDONE_MASK,
 };

 #ifdef CONFIG_SPL_BUILD
 /* No env to setup for SPL */
 static inline void setup_board_eeprom_env(void) { }

 /* Override function to read eeprom information */
 void do_board_detect(void)
 {
 	int rc;

 	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
 				  CONFIG_EEPROM_CHIP_ADDRESS);
 	if (rc)
 		printf("ti_i2c_eeprom_init failed %d\n", rc);
 }

 #else	/* CONFIG_SPL_BUILD */

 /* Override function to read eeprom information: actual i2c read done by SPL*/
 void do_board_detect(void)
 {
 	char *bname = NULL;
 	int rc;

 	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
 				  CONFIG_EEPROM_CHIP_ADDRESS);
 	if (rc)
 		printf("ti_i2c_eeprom_init failed %d\n", rc);

 	if (board_is_x15())
 		bname = "BeagleBoard X15";
 	else if (board_is_am572x_evm())
 		bname = "AM572x EVM";
 	else if (board_is_am572x_idk())
 		bname = "AM572x IDK";

 	if (bname)
 		snprintf(sysinfo.board_string, SYSINFO_BOARD_NAME_MAX_LEN,
 			 "Board: %s REV %s\n", bname, board_ti_get_rev());
 }

 static void setup_board_eeprom_env(void)
 {
 	char *name = "beagle_x15";
 	int rc;

 	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
 				  CONFIG_EEPROM_CHIP_ADDRESS);
 	if (rc)
 		goto invalid_eeprom;

 	if (board_is_am572x_evm())
 		name = "am57xx_evm";
 	else if (board_is_am572x_idk())
 		name = "am572x_idk";
 	else
 		printf("Unidentified board claims %s in eeprom header\n",
 		       board_ti_get_name());

 invalid_eeprom:
 	set_board_info_env(name);
 }

 #endif	/* CONFIG_SPL_BUILD */

 void vcores_init(void)
 {
 	if (board_is_am572x_idk())
 		*omap_vcores = &am572x_idk_volts;
 	else
 		*omap_vcores = &beagle_x15_volts;
 }

 void hw_data_init(void)
 {
 	*prcm = &dra7xx_prcm;
 	*dplls_data = &dra7xx_dplls;
 	*ctrl = &dra7xx_ctrl;
 }

 int board_init(void)
 {
 	gpmc_init();
 	gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);

 	return 0;
 }

 int board_late_init(void)
 {
 	setup_board_eeprom_env();

 	/*
 	 * DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds
 	 * This is the POWERHOLD-in-Low behavior.
 	 */
 	palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1);
 	return 0;
 }

 void set_muxconf_regs(void)
 {
 	do_set_mux32((*ctrl)->control_padconf_core_base,
 		     early_padconf, ARRAY_SIZE(early_padconf));
 }

 #ifdef CONFIG_IODELAY_RECALIBRATION
 void recalibrate_iodelay(void)
 {
 	const struct pad_conf_entry *pconf;
 	const struct iodelay_cfg_entry *iod;
 	int pconf_sz, iod_sz;

 	if (board_is_am572x_idk()) {
 		pconf = core_padconf_array_essential_am572x_idk;
 		pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am572x_idk);
 		iod = iodelay_cfg_array_am572x_idk;
 		iod_sz = ARRAY_SIZE(iodelay_cfg_array_am572x_idk);
 	} else {
 		/* Common for X15/GPEVM */
 		pconf = core_padconf_array_essential_x15;
 		pconf_sz = ARRAY_SIZE(core_padconf_array_essential_x15);
 		iod = iodelay_cfg_array_x15;
 		iod_sz = ARRAY_SIZE(iodelay_cfg_array_x15);
 	}

 	__recalibrate_iodelay(pconf, pconf_sz, iod, iod_sz);
 }
 #endif

 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
 int board_mmc_init(bd_t *bis)
 {
 	omap_mmc_init(0, 0, 0, -1, -1);
 	omap_mmc_init(1, 0, 0, -1, -1);
 	return 0;
 }
 #endif

 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
 int spl_start_uboot(void)
 {
 	/* break into full u-boot on 'c' */
 	if (serial_tstc() && serial_getc() == 'c')
 		return 1;

 #ifdef CONFIG_SPL_ENV_SUPPORT
 	env_init();
 	env_relocate_spec();
 	if (getenv_yesno("boot_os") != 1)
 		return 1;
 #endif

 	return 0;
 }
 #endif

 #ifdef CONFIG_USB_DWC3
 static struct dwc3_device usb_otg_ss1 = {
 	.maximum_speed = USB_SPEED_SUPER,
 	.base = DRA7_USB_OTG_SS1_BASE,
 	.tx_fifo_resize = false,
 	.index = 0,
 };

 static struct dwc3_omap_device usb_otg_ss1_glue = {
 	.base = (void *)DRA7_USB_OTG_SS1_GLUE_BASE,
 	.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
 	.index = 0,
 };

 static struct ti_usb_phy_device usb_phy1_device = {
 	.pll_ctrl_base = (void *)DRA7_USB3_PHY1_PLL_CTRL,
 	.usb2_phy_power = (void *)DRA7_USB2_PHY1_POWER,
 	.usb3_phy_power = (void *)DRA7_USB3_PHY1_POWER,
 	.index = 0,
 };

 static struct dwc3_device usb_otg_ss2 = {
 	.maximum_speed = USB_SPEED_HIGH,
 	.base = DRA7_USB_OTG_SS2_BASE,
 	.tx_fifo_resize = false,
 	.index = 1,
 };

 static struct dwc3_omap_device usb_otg_ss2_glue = {
 	.base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE,
 	.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
 	.index = 1,
 };

 static struct ti_usb_phy_device usb_phy2_device = {
 	.usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER,
 	.index = 1,
 };

 int usb_gadget_handle_interrupts(int index)
 {
 	u32 status;

 	status = dwc3_omap_uboot_interrupt_status(index);
 	if (status)
 		dwc3_uboot_handle_interrupt(index);

 	return 0;
 }
 #endif /* CONFIG_USB_DWC3 */

 #if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
 int board_usb_init(int index, enum usb_init_type init)
 {
 	enable_usb_clocks(index);
 	switch (index) {
 	case 0:
 		if (init == USB_INIT_DEVICE) {
 			printf("port %d can't be used as device\n", index);
 			disable_usb_clocks(index);
 			return -EINVAL;
 		}
 		break;
 	case 1:
 		if (init == USB_INIT_DEVICE) {
 #ifdef CONFIG_USB_DWC3
 			usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
 			usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
 			ti_usb_phy_uboot_init(&usb_phy2_device);
 			dwc3_omap_uboot_init(&usb_otg_ss2_glue);
 			dwc3_uboot_init(&usb_otg_ss2);
 #endif
 		} else {
 			printf("port %d can't be used as host\n", index);
 			disable_usb_clocks(index);
 			return -EINVAL;
 		}

 		break;
 	default:
 		printf("Invalid Controller Index\n");
 	}

 	return 0;
 }

 int board_usb_cleanup(int index, enum usb_init_type init)
 {
 #ifdef CONFIG_USB_DWC3
 	switch (index) {
 	case 0:
 	case 1:
 		if (init == USB_INIT_DEVICE) {
 			ti_usb_phy_uboot_exit(index);
 			dwc3_uboot_exit(index);
 			dwc3_omap_uboot_exit(index);
 		}
 		break;
 	default:
 		printf("Invalid Controller Index\n");
 	}
 #endif
 	disable_usb_clocks(index);
 	return 0;
 }
 #endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */

 #ifdef CONFIG_DRIVER_TI_CPSW

 /* Delay value to add to calibrated value */
 #define RGMII0_TXCTL_DLY_VAL		((0x3 << 5) + 0x8)
 #define RGMII0_TXD0_DLY_VAL		((0x3 << 5) + 0x8)
 #define RGMII0_TXD1_DLY_VAL		((0x3 << 5) + 0x2)
 #define RGMII0_TXD2_DLY_VAL		((0x4 << 5) + 0x0)
 #define RGMII0_TXD3_DLY_VAL		((0x4 << 5) + 0x0)
 #define VIN2A_D13_DLY_VAL		((0x3 << 5) + 0x8)
 #define VIN2A_D17_DLY_VAL		((0x3 << 5) + 0x8)
 #define VIN2A_D16_DLY_VAL		((0x3 << 5) + 0x2)
 #define VIN2A_D15_DLY_VAL		((0x4 << 5) + 0x0)
 #define VIN2A_D14_DLY_VAL		((0x4 << 5) + 0x0)

 static void cpsw_control(int enabled)
 {
 	/* VTP can be added here */
 }

 static struct cpsw_slave_data cpsw_slaves[] = {
 	{
 		.slave_reg_ofs	= 0x208,
 		.sliver_reg_ofs	= 0xd80,
 		.phy_addr	= 1,
 	},
 	{
 		.slave_reg_ofs	= 0x308,
 		.sliver_reg_ofs	= 0xdc0,
 		.phy_addr	= 2,
 	},
 };

 static struct cpsw_platform_data cpsw_data = {
 	.mdio_base		= CPSW_MDIO_BASE,
 	.cpsw_base		= CPSW_BASE,
 	.mdio_div		= 0xff,
 	.channels		= 8,
 	.cpdma_reg_ofs		= 0x800,
 	.slaves			= 1,
 	.slave_data		= cpsw_slaves,
 	.ale_reg_ofs		= 0xd00,
 	.ale_entries		= 1024,
 	.host_port_reg_ofs	= 0x108,
 	.hw_stats_reg_ofs	= 0x900,
 	.bd_ram_ofs		= 0x2000,
 	.mac_control		= (1 << 5),
 	.control		= cpsw_control,
 	.host_port_num		= 0,
 	.version		= CPSW_CTRL_VERSION_2,
 };

 static u64 mac_to_u64(u8 mac[6])
 {
 	int i;
 	u64 addr = 0;

 	for (i = 0; i < 6; i++) {
 		addr <<= 8;
 		addr |= mac[i];
 	}

 	return addr;
 }

 static void u64_to_mac(u64 addr, u8 mac[6])
 {
 	mac[5] = addr;
 	mac[4] = addr >> 8;
 	mac[3] = addr >> 16;
 	mac[2] = addr >> 24;
 	mac[1] = addr >> 32;
 	mac[0] = addr >> 40;
 }

 int board_eth_init(bd_t *bis)
 {
 	int ret;
 	uint8_t mac_addr[6];
 	uint32_t mac_hi, mac_lo;
 	uint32_t ctrl_val;
 	int i;
 	u64 mac1, mac2;
 	u8 mac_addr1[6], mac_addr2[6];
 	int num_macs;

 	/* try reading mac address from efuse */
 	mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
 	mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
 	mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
 	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
 	mac_addr[2] = mac_hi & 0xFF;
 	mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
 	mac_addr[4] = (mac_lo & 0xFF00) >> 8;
 	mac_addr[5] = mac_lo & 0xFF;

 	if (!getenv("ethaddr")) {
 		printf("<ethaddr> not set. Validating first E-fuse MAC\n");

 		if (is_valid_ethaddr(mac_addr))
 			eth_setenv_enetaddr("ethaddr", mac_addr);
 	}

 	mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
 	mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
 	mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
 	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
 	mac_addr[2] = mac_hi & 0xFF;
 	mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
 	mac_addr[4] = (mac_lo & 0xFF00) >> 8;
 	mac_addr[5] = mac_lo & 0xFF;

 	if (!getenv("eth1addr")) {
 		if (is_valid_ethaddr(mac_addr))
 			eth_setenv_enetaddr("eth1addr", mac_addr);
 	}

 	ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
 	ctrl_val |= 0x22;
 	writel(ctrl_val, (*ctrl)->control_core_control_io1);

 	/* The phy address for the AM572x IDK are different than x15 */
 	if (board_is_am572x_idk()) {
 		cpsw_data.slave_data[0].phy_addr = 0;
 		cpsw_data.slave_data[1].phy_addr = 1;
 	}

 	ret = cpsw_register(&cpsw_data);
 	if (ret < 0)
 		printf("Error %d registering CPSW switch\n", ret);

 	/*
 	 * Export any Ethernet MAC addresses from EEPROM.
 	 * On AM57xx the 2 MAC addresses define the address range
 	 */
 	board_ti_get_eth_mac_addr(0, mac_addr1);
 	board_ti_get_eth_mac_addr(1, mac_addr2);

 	if (is_valid_ethaddr(mac_addr1) && is_valid_ethaddr(mac_addr2)) {
 		mac1 = mac_to_u64(mac_addr1);
 		mac2 = mac_to_u64(mac_addr2);

 		/* must contain an address range */
 		num_macs = mac2 - mac1 + 1;
 		/* <= 50 to protect against user programming error */
 		if (num_macs > 0 && num_macs <= 50) {
 			for (i = 0; i < num_macs; i++) {
 				u64_to_mac(mac1 + i, mac_addr);
 				if (is_valid_ethaddr(mac_addr)) {
 					eth_setenv_enetaddr_by_index("eth",
 								     i + 2,
 								     mac_addr);
 				}
 			}
 		}
 	}

 	return ret;
 }
 #endif

 #ifdef CONFIG_BOARD_EARLY_INIT_F
 /* VTT regulator enable */
 static inline void vtt_regulator_enable(void)
 {
 	if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
 		return;

 	gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
 	gpio_direction_output(GPIO_DDR_VTT_EN, 1);
 }

 int board_early_init_f(void)
 {
 	vtt_regulator_enable();
 	return 0;
 }
 #endif

 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 int ft_board_setup(void *blob, bd_t *bd)
 {
 	ft_cpu_setup(blob, bd);

 	return 0;
 }
 #endif

 #ifdef CONFIG_SPL_LOAD_FIT
 int board_fit_config_name_match(const char *name)
 {
 	if (board_is_x15() && !strcmp(name, "am57xx-beagle-x15"))
 		return 0;
 	else if (board_is_am572x_evm() && !strcmp(name, "am57xx-beagle-x15"))
 		return 0;
 	else
 		return -1;
 }
 #endif
	/*
	* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
	*
	* Author: Felipe Balbi <balbi@ti.com>
	*
	* Based on board/ti/dra7xx/evm.c
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <palmas.h>
	#include <sata.h>
	#include <usb.h>
	#include <asm/omap_common.h>
	#include <asm/emif.h>
	#include <asm/gpio.h>
	#include <asm/arch/gpio.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/dra7xx_iodelay.h>
	#include <asm/arch/sys_proto.h>
	#include <asm/arch/mmc_host_def.h>
	#include <asm/arch/sata.h>
	#include <asm/arch/gpio.h>
	#include <asm/arch/omap.h>
	#include <environment.h>
	#include <usb.h>
	#include <linux/usb/gadget.h>
	#include <dwc3-uboot.h>
	#include <dwc3-omap-uboot.h>
	#include <ti-usb-phy-uboot.h>

	#include "../common/board_detect.h"
	#include "mux_data.h"

	#define board_is_x15() board_ti_is("BBRDX15_")
	#define board_is_am572x_evm() board_ti_is("AM572PM_")
	#define board_is_am572x_idk() board_ti_is("AM572IDK")

	#ifdef CONFIG_DRIVER_TI_CPSW
	#include <cpsw.h>
	#endif

	DECLARE_GLOBAL_DATA_PTR;

	/* GPIO 7_11 */
	#define GPIO_DDR_VTT_EN 203

	#define SYSINFO_BOARD_NAME_MAX_LEN 45

	const struct omap_sysinfo sysinfo = {
	"Board: UNKNOWN(BeagleBoard X15?) REV UNKNOWN\n"
	};

	static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
	.dmm_lisa_map_3 = 0x80740300,
	.is_ma_present = 0x1
	};

	void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
	{
	*dmm_lisa_regs = &beagle_x15_lisa_regs;
	}

	static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = {
	.sdram_config_init = 0x61851b32,
	.sdram_config = 0x61851b32,
	.sdram_config2 = 0x08000000,
	.ref_ctrl = 0x000040F1,
	.ref_ctrl_final = 0x00001035,
	.sdram_tim1 = 0xcccf36ab,
	.sdram_tim2 = 0x308f7fda,
	.sdram_tim3 = 0x409f88a8,
	.read_idle_ctrl = 0x00050000,
	.zq_config = 0x5007190b,
	.temp_alert_config = 0x00000000,
	.emif_ddr_phy_ctlr_1_init = 0x0024400b,
	.emif_ddr_phy_ctlr_1 = 0x0e24400b,
	.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
	.emif_ddr_ext_phy_ctrl_2 = 0x00910091,
	.emif_ddr_ext_phy_ctrl_3 = 0x00950095,
	.emif_ddr_ext_phy_ctrl_4 = 0x009b009b,
	.emif_ddr_ext_phy_ctrl_5 = 0x009e009e,
	.emif_rd_wr_lvl_rmp_win = 0x00000000,
	.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
	.emif_rd_wr_lvl_ctl = 0x00000000,
	.emif_rd_wr_exec_thresh = 0x00000305
	};

	/* Ext phy ctrl regs 1-35 */
	static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = {
	0x10040100,
	0x00910091,
	0x00950095,
	0x009B009B,
	0x009E009E,
	0x00980098,
	0x00340034,
	0x00350035,
	0x00340034,
	0x00310031,
	0x00340034,
	0x007F007F,
	0x007F007F,
	0x007F007F,
	0x007F007F,
	0x007F007F,
	0x00480048,
	0x004A004A,
	0x00520052,
	0x00550055,
	0x00500050,
	0x00000000,
	0x00600020,
	0x40011080,
	0x08102040,
	0x0,
	0x0,
	0x0,
	0x0,
	0x0,
	0x0,
	0x0,
	0x0,
	0x0,
	0x0
	};

	static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = {
	.sdram_config_init = 0x61851b32,
	.sdram_config = 0x61851b32,
	.sdram_config2 = 0x08000000,
	.ref_ctrl = 0x000040F1,
	.ref_ctrl_final = 0x00001035,
	.sdram_tim1 = 0xcccf36b3,
	.sdram_tim2 = 0x308f7fda,
	.sdram_tim3 = 0x407f88a8,
	.read_idle_ctrl = 0x00050000,
	.zq_config = 0x5007190b,
	.temp_alert_config = 0x00000000,
	.emif_ddr_phy_ctlr_1_init = 0x0024400b,
	.emif_ddr_phy_ctlr_1 = 0x0e24400b,
	.emif_ddr_ext_phy_ctrl_1 = 0x10040100,
	.emif_ddr_ext_phy_ctrl_2 = 0x00910091,
	.emif_ddr_ext_phy_ctrl_3 = 0x00950095,
	.emif_ddr_ext_phy_ctrl_4 = 0x009b009b,
	.emif_ddr_ext_phy_ctrl_5 = 0x009e009e,
	.emif_rd_wr_lvl_rmp_win = 0x00000000,
	.emif_rd_wr_lvl_rmp_ctl = 0x80000000,
	.emif_rd_wr_lvl_ctl = 0x00000000,
	.emif_rd_wr_exec_thresh = 0x00000305
	};

	static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = {
	0x10040100,
	0x00910091,
	0x00950095,
	0x009B009B,
	0x009E009E,
	0x00980098,
	0x00340034,
	0x00350035,
	0x00340034,
	0x00310031,
	0x00340034,
	0x007F007F,
	0x007F007F,
	0x007F007F,
	0x007F007F,
	0x007F007F,
	0x00480048,
	0x004A004A,
	0x00520052,
	0x00550055,
	0x00500050,
	0x00000000,
	0x00600020,
	0x40011080,
	0x08102040,
	0x0,
	0x0,
	0x0,
	0x0,
	0x0,
	0x0,
	0x0,
	0x0,
	0x0,
	0x0
	};

	void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
	{
	switch (emif_nr) {
	case 1:
	*regs = &beagle_x15_emif1_ddr3_532mhz_emif_regs;
	break;
	case 2:
	*regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs;
	break;
	}
	}

	void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 *regs, u32 size)
	{
	switch (emif_nr) {
	case 1:
	*regs = beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs;
	*size = ARRAY_SIZE(beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs);
	break;
	case 2:
	*regs = beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs;
	*size = ARRAY_SIZE(beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs);
	break;
	}
	}

	struct vcores_data beagle_x15_volts = {
	.mpu.value = VDD_MPU_DRA7,
	.mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU,
	.mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
	.mpu.addr = TPS659038_REG_ADDR_SMPS12,
	.mpu.pmic = &tps659038,
	.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,

	.eve.value = VDD_EVE_DRA7,
	.eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE,
	.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
	.eve.addr = TPS659038_REG_ADDR_SMPS45,
	.eve.pmic = &tps659038,
	.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,

	.gpu.value = VDD_GPU_DRA7,
	.gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU,
	.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
	.gpu.addr = TPS659038_REG_ADDR_SMPS45,
	.gpu.pmic = &tps659038,
	.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,

	.core.value = VDD_CORE_DRA7,
	.core.efuse.reg = STD_FUSE_OPP_VMIN_CORE,
	.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
	.core.addr = TPS659038_REG_ADDR_SMPS6,
	.core.pmic = &tps659038,

	.iva.value = VDD_IVA_DRA7,
	.iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA,
	.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
	.iva.addr = TPS659038_REG_ADDR_SMPS45,
	.iva.pmic = &tps659038,
	.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
	};

	struct vcores_data am572x_idk_volts = {
	.mpu.value = VDD_MPU_DRA7,
	.mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU,
	.mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
	.mpu.addr = TPS659038_REG_ADDR_SMPS12,
	.mpu.pmic = &tps659038,
	.mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,

	.eve.value = VDD_EVE_DRA7,
	.eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE,
	.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
	.eve.addr = TPS659038_REG_ADDR_SMPS45,
	.eve.pmic = &tps659038,
	.eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK,

	.gpu.value = VDD_GPU_DRA7,
	.gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU,
	.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
	.gpu.addr = TPS659038_REG_ADDR_SMPS6,
	.gpu.pmic = &tps659038,
	.gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK,

	.core.value = VDD_CORE_DRA7,
	.core.efuse.reg = STD_FUSE_OPP_VMIN_CORE,
	.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
	.core.addr = TPS659038_REG_ADDR_SMPS7,
	.core.pmic = &tps659038,

	.iva.value = VDD_IVA_DRA7,
	.iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA,
	.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
	.iva.addr = TPS659038_REG_ADDR_SMPS8,
	.iva.pmic = &tps659038,
	.iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK,
	};

	#ifdef CONFIG_SPL_BUILD
	/* No env to setup for SPL */
	static inline void setup_board_eeprom_env(void) { }

	/* Override function to read eeprom information */
	void do_board_detect(void)
	{
	int rc;

	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
	CONFIG_EEPROM_CHIP_ADDRESS);
	if (rc)
	printf("ti_i2c_eeprom_init failed %d\n", rc);
	}

	#else /* CONFIG_SPL_BUILD */

	/* Override function to read eeprom information: actual i2c read done by SPL*/
	void do_board_detect(void)
	{
	char *bname = NULL;
	int rc;

	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
	CONFIG_EEPROM_CHIP_ADDRESS);
	if (rc)
	printf("ti_i2c_eeprom_init failed %d\n", rc);

	if (board_is_x15())
	bname = "BeagleBoard X15";
	else if (board_is_am572x_evm())
	bname = "AM572x EVM";
	else if (board_is_am572x_idk())
	bname = "AM572x IDK";

	if (bname)
	snprintf(sysinfo.board_string, SYSINFO_BOARD_NAME_MAX_LEN,
	"Board: %s REV %s\n", bname, board_ti_get_rev());
	}

	static void setup_board_eeprom_env(void)
	{
	char *name = "beagle_x15";
	int rc;

	rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
	CONFIG_EEPROM_CHIP_ADDRESS);
	if (rc)
	goto invalid_eeprom;

	if (board_is_am572x_evm())
	name = "am57xx_evm";
	else if (board_is_am572x_idk())
	name = "am572x_idk";
	else
	printf("Unidentified board claims %s in eeprom header\n",
	board_ti_get_name());

	invalid_eeprom:
	set_board_info_env(name);
	}

	#endif /* CONFIG_SPL_BUILD */

	void vcores_init(void)
	{
	if (board_is_am572x_idk())
	*omap_vcores = &am572x_idk_volts;
	else
	*omap_vcores = &beagle_x15_volts;
	}

	void hw_data_init(void)
	{
	*prcm = &dra7xx_prcm;
	*dplls_data = &dra7xx_dplls;
	*ctrl = &dra7xx_ctrl;
	}

	int board_init(void)
	{
	gpmc_init();
	gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);

	return 0;
	}

	int board_late_init(void)
	{
	setup_board_eeprom_env();

	/*
	* DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds
	* This is the POWERHOLD-in-Low behavior.
	*/
	palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1);
	return 0;
	}

	void set_muxconf_regs(void)
	{
	do_set_mux32((*ctrl)->control_padconf_core_base,
	early_padconf, ARRAY_SIZE(early_padconf));
	}

	#ifdef CONFIG_IODELAY_RECALIBRATION
	void recalibrate_iodelay(void)
	{
	const struct pad_conf_entry *pconf;
	const struct iodelay_cfg_entry *iod;
	int pconf_sz, iod_sz;

	if (board_is_am572x_idk()) {
	pconf = core_padconf_array_essential_am572x_idk;
	pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am572x_idk);
	iod = iodelay_cfg_array_am572x_idk;
	iod_sz = ARRAY_SIZE(iodelay_cfg_array_am572x_idk);
	} else {
	/* Common for X15/GPEVM */
	pconf = core_padconf_array_essential_x15;
	pconf_sz = ARRAY_SIZE(core_padconf_array_essential_x15);
	iod = iodelay_cfg_array_x15;
	iod_sz = ARRAY_SIZE(iodelay_cfg_array_x15);
	}

	__recalibrate_iodelay(pconf, pconf_sz, iod, iod_sz);
	}
	#endif

	#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
	int board_mmc_init(bd_t *bis)
	{
	omap_mmc_init(0, 0, 0, -1, -1);
	omap_mmc_init(1, 0, 0, -1, -1);
	return 0;
	}
	#endif

	#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
	int spl_start_uboot(void)
	{
	/* break into full u-boot on 'c' */
	if (serial_tstc() && serial_getc() == 'c')
	return 1;

	#ifdef CONFIG_SPL_ENV_SUPPORT
	env_init();
	env_relocate_spec();
	if (getenv_yesno("boot_os") != 1)
	return 1;
	#endif

	return 0;
	}
	#endif

	#ifdef CONFIG_USB_DWC3
	static struct dwc3_device usb_otg_ss1 = {
	.maximum_speed = USB_SPEED_SUPER,
	.base = DRA7_USB_OTG_SS1_BASE,
	.tx_fifo_resize = false,
	.index = 0,
	};

	static struct dwc3_omap_device usb_otg_ss1_glue = {
	.base = (void *)DRA7_USB_OTG_SS1_GLUE_BASE,
	.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
	.index = 0,
	};

	static struct ti_usb_phy_device usb_phy1_device = {
	.pll_ctrl_base = (void *)DRA7_USB3_PHY1_PLL_CTRL,
	.usb2_phy_power = (void *)DRA7_USB2_PHY1_POWER,
	.usb3_phy_power = (void *)DRA7_USB3_PHY1_POWER,
	.index = 0,
	};

	static struct dwc3_device usb_otg_ss2 = {
	.maximum_speed = USB_SPEED_HIGH,
	.base = DRA7_USB_OTG_SS2_BASE,
	.tx_fifo_resize = false,
	.index = 1,
	};

	static struct dwc3_omap_device usb_otg_ss2_glue = {
	.base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE,
	.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
	.index = 1,
	};

	static struct ti_usb_phy_device usb_phy2_device = {
	.usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER,
	.index = 1,
	};

	int usb_gadget_handle_interrupts(int index)
	{
	u32 status;

	status = dwc3_omap_uboot_interrupt_status(index);
	if (status)
	dwc3_uboot_handle_interrupt(index);

	return 0;
	}
	#endif /* CONFIG_USB_DWC3 */

	#if defined(CONFIG_USB_DWC3) \|\| defined(CONFIG_USB_XHCI_OMAP)
	int board_usb_init(int index, enum usb_init_type init)
	{
	enable_usb_clocks(index);
	switch (index) {
	case 0:
	if (init == USB_INIT_DEVICE) {
	printf("port %d can't be used as device\n", index);
	disable_usb_clocks(index);
	return -EINVAL;
	}
	break;
	case 1:
	if (init == USB_INIT_DEVICE) {
	#ifdef CONFIG_USB_DWC3
	usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
	usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
	ti_usb_phy_uboot_init(&usb_phy2_device);
	dwc3_omap_uboot_init(&usb_otg_ss2_glue);
	dwc3_uboot_init(&usb_otg_ss2);
	#endif
	} else {
	printf("port %d can't be used as host\n", index);
	disable_usb_clocks(index);
	return -EINVAL;
	}

	break;
	default:
	printf("Invalid Controller Index\n");
	}

	return 0;
	}

	int board_usb_cleanup(int index, enum usb_init_type init)
	{
	#ifdef CONFIG_USB_DWC3
	switch (index) {
	case 0:
	case 1:
	if (init == USB_INIT_DEVICE) {
	ti_usb_phy_uboot_exit(index);
	dwc3_uboot_exit(index);
	dwc3_omap_uboot_exit(index);
	}
	break;
	default:
	printf("Invalid Controller Index\n");
	}
	#endif
	disable_usb_clocks(index);
	return 0;
	}
	#endif /* defined(CONFIG_USB_DWC3) \|\| defined(CONFIG_USB_XHCI_OMAP) */

	#ifdef CONFIG_DRIVER_TI_CPSW

	/* Delay value to add to calibrated value */
	#define RGMII0_TXCTL_DLY_VAL ((0x3 << 5) + 0x8)
	#define RGMII0_TXD0_DLY_VAL ((0x3 << 5) + 0x8)
	#define RGMII0_TXD1_DLY_VAL ((0x3 << 5) + 0x2)
	#define RGMII0_TXD2_DLY_VAL ((0x4 << 5) + 0x0)
	#define RGMII0_TXD3_DLY_VAL ((0x4 << 5) + 0x0)
	#define VIN2A_D13_DLY_VAL ((0x3 << 5) + 0x8)
	#define VIN2A_D17_DLY_VAL ((0x3 << 5) + 0x8)
	#define VIN2A_D16_DLY_VAL ((0x3 << 5) + 0x2)
	#define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0)
	#define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0)

	static void cpsw_control(int enabled)
	{
	/* VTP can be added here */
	}

	static struct cpsw_slave_data cpsw_slaves[] = {
	{
	.slave_reg_ofs = 0x208,
	.sliver_reg_ofs = 0xd80,
	.phy_addr = 1,
	},
	{
	.slave_reg_ofs = 0x308,
	.sliver_reg_ofs = 0xdc0,
	.phy_addr = 2,
	},
	};

	static struct cpsw_platform_data cpsw_data = {
	.mdio_base = CPSW_MDIO_BASE,
	.cpsw_base = CPSW_BASE,
	.mdio_div = 0xff,
	.channels = 8,
	.cpdma_reg_ofs = 0x800,
	.slaves = 1,
	.slave_data = cpsw_slaves,
	.ale_reg_ofs = 0xd00,
	.ale_entries = 1024,
	.host_port_reg_ofs = 0x108,
	.hw_stats_reg_ofs = 0x900,
	.bd_ram_ofs = 0x2000,
	.mac_control = (1 << 5),
	.control = cpsw_control,
	.host_port_num = 0,
	.version = CPSW_CTRL_VERSION_2,
	};

	static u64 mac_to_u64(u8 mac[6])
	{
	int i;
	u64 addr = 0;

	for (i = 0; i < 6; i++) {
	addr <<= 8;
	addr \|= mac[i];
	}

	return addr;
	}

	static void u64_to_mac(u64 addr, u8 mac[6])
	{
	mac[5] = addr;
	mac[4] = addr >> 8;
	mac[3] = addr >> 16;
	mac[2] = addr >> 24;
	mac[1] = addr >> 32;
	mac[0] = addr >> 40;
	}

	int board_eth_init(bd_t *bis)
	{
	int ret;
	uint8_t mac_addr[6];
	uint32_t mac_hi, mac_lo;
	uint32_t ctrl_val;
	int i;
	u64 mac1, mac2;
	u8 mac_addr1[6], mac_addr2[6];
	int num_macs;

	/* try reading mac address from efuse */
	mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
	mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
	mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
	mac_addr[2] = mac_hi & 0xFF;
	mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
	mac_addr[4] = (mac_lo & 0xFF00) >> 8;
	mac_addr[5] = mac_lo & 0xFF;

	if (!getenv("ethaddr")) {
	printf("<ethaddr> not set. Validating first E-fuse MAC\n");

	if (is_valid_ethaddr(mac_addr))
	eth_setenv_enetaddr("ethaddr", mac_addr);
	}

	mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
	mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
	mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
	mac_addr[2] = mac_hi & 0xFF;
	mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
	mac_addr[4] = (mac_lo & 0xFF00) >> 8;
	mac_addr[5] = mac_lo & 0xFF;

	if (!getenv("eth1addr")) {
	if (is_valid_ethaddr(mac_addr))
	eth_setenv_enetaddr("eth1addr", mac_addr);
	}

	ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
	ctrl_val \|= 0x22;
	writel(ctrl_val, (*ctrl)->control_core_control_io1);

	/* The phy address for the AM572x IDK are different than x15 */
	if (board_is_am572x_idk()) {
	cpsw_data.slave_data[0].phy_addr = 0;
	cpsw_data.slave_data[1].phy_addr = 1;
	}

	ret = cpsw_register(&cpsw_data);
	if (ret < 0)
	printf("Error %d registering CPSW switch\n", ret);

	/*
	* Export any Ethernet MAC addresses from EEPROM.
	* On AM57xx the 2 MAC addresses define the address range
	*/
	board_ti_get_eth_mac_addr(0, mac_addr1);
	board_ti_get_eth_mac_addr(1, mac_addr2);

	if (is_valid_ethaddr(mac_addr1) && is_valid_ethaddr(mac_addr2)) {
	mac1 = mac_to_u64(mac_addr1);
	mac2 = mac_to_u64(mac_addr2);

	/* must contain an address range */
	num_macs = mac2 - mac1 + 1;
	/* <= 50 to protect against user programming error */
	if (num_macs > 0 && num_macs <= 50) {
	for (i = 0; i < num_macs; i++) {
	u64_to_mac(mac1 + i, mac_addr);
	if (is_valid_ethaddr(mac_addr)) {
	eth_setenv_enetaddr_by_index("eth",
	i + 2,
	mac_addr);
	}
	}
	}
	}

	return ret;
	}
	#endif

	#ifdef CONFIG_BOARD_EARLY_INIT_F
	/* VTT regulator enable */
	static inline void vtt_regulator_enable(void)
	{
	if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
	return;

	gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
	gpio_direction_output(GPIO_DDR_VTT_EN, 1);
	}

	int board_early_init_f(void)
	{
	vtt_regulator_enable();
	return 0;
	}
	#endif

	#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
	int ft_board_setup(void blob, bd_t bd)
	{
	ft_cpu_setup(blob, bd);

	return 0;
	}
	#endif

	#ifdef CONFIG_SPL_LOAD_FIT
	int board_fit_config_name_match(const char *name)
	{
	if (board_is_x15() && !strcmp(name, "am57xx-beagle-x15"))
	return 0;
	else if (board_is_am572x_evm() && !strcmp(name, "am57xx-beagle-x15"))
	return 0;
	else
	return -1;
	}
	#endif