doc/driver-model/README.txt - filogic/uboot - Gitiles

 Driver Model
 ============

 This README contains high-level information about driver model, a unified
 way of declaring and accessing drivers in U-Boot. The original work was done
 by:

    Marek Vasut <marex@denx.de>
    Pavel Herrmann <morpheus.ibis@gmail.com>
    Viktor Křivák <viktor.krivak@gmail.com>
    Tomas Hlavacek <tmshlvck@gmail.com>

 This has been both simplified and extended into the current implementation
 by:

    Simon Glass <sjg@chromium.org>


 Terminology
 -----------

 Uclass - a group of devices which operate in the same way. A uclass provides
 	a way of accessing invidual devices within the group, but always
 	using the same interface. For example a GPIO uclass provides
 	operations for get/set value. An I2C uclass may have 10 I2C ports,
 	4 with one driver, and 6 with another.

 Driver - some code which talks to a peripheral and presents a higher-level
 	interface to it.

 Device - an instance of a driver, tied to a particular port or peripheral.


 How to try it
 -------------

 Build U-Boot sandbox and run it:

    make sandbox_config
    make
    ./u-boot

    (type 'reset' to exit U-Boot)


 There is a uclass called 'demo'. This uclass handles
 saying hello, and reporting its status. There are two drivers in this
 uclass:

    - simple: Just prints a message for hello, doesn't implement status
    - shape: Prints shapes and reports number of characters printed as status

 The demo class is pretty simple, but not trivial. The intention is that it
 can be used for testing, so it will implement all driver model features and
 provide good code coverage of them. It does have multiple drivers, it
 handles parameter data and platdata (data which tells the driver how
 to operate on a particular platform) and it uses private driver data.

 To try it, see the example session below:

 =>demo hello 1
 Hello '@' from 07981110: red 4
 =>demo status 2
 Status: 0
 =>demo hello 2
 g
 r@
 e@@
 e@@@
 n@@@@
 g@@@@@
 =>demo status 2
 Status: 21
 =>demo hello 4 ^
   y^^^
  e^^^^^
 l^^^^^^^
 l^^^^^^^
  o^^^^^
   w^^^
 =>demo status 4
 Status: 36
 =>


 Running the tests
 -----------------

 The intent with driver model is that the core portion has 100% test coverage
 in sandbox, and every uclass has its own test. As a move towards this, tests
 are provided in test/dm. To run them, try:

    ./test/dm/test-dm.sh

 You should see something like this:

     <...U-Boot banner...>
     Running 12 driver model tests
     Test: dm_test_autobind
     Test: dm_test_autoprobe
     Test: dm_test_children
     Test: dm_test_fdt
     Test: dm_test_gpio
     sandbox_gpio: sb_gpio_get_value: error: offset 4 not reserved
     Test: dm_test_leak
     Warning: Please add '#define DEBUG' to the top of common/dlmalloc.c
     Warning: Please add '#define DEBUG' to the top of common/dlmalloc.c
     Test: dm_test_lifecycle
     Test: dm_test_operations
     Test: dm_test_ordering
     Test: dm_test_platdata
     Test: dm_test_remove
     Test: dm_test_uclass
     Failures: 0

 (You can add '#define DEBUG' as suggested to check for memory leaks)


 What is going on?
 -----------------

 Let's start at the top. The demo command is in common/cmd_demo.c. It does
 the usual command procesing and then:

 	struct udevice *demo_dev;

 	ret = uclass_get_device(UCLASS_DEMO, devnum, &demo_dev);

 UCLASS_DEMO means the class of devices which implement 'demo'. Other
 classes might be MMC, or GPIO, hashing or serial. The idea is that the
 devices in the class all share a particular way of working. The class
 presents a unified view of all these devices to U-Boot.

 This function looks up a device for the demo uclass. Given a device
 number we can find the device because all devices have registered with
 the UCLASS_DEMO uclass.

 The device is automatically activated ready for use by uclass_get_device().

 Now that we have the device we can do things like:

 	return demo_hello(demo_dev, ch);

 This function is in the demo uclass. It takes care of calling the 'hello'
 method of the relevant driver. Bearing in mind that there are two drivers,
 this particular device may use one or other of them.

 The code for demo_hello() is in drivers/demo/demo-uclass.c:

 int demo_hello(struct udevice *dev, int ch)
 {
 	const struct demo_ops *ops = device_get_ops(dev);

 	if (!ops->hello)
 		return -ENOSYS;

 	return ops->hello(dev, ch);
 }

 As you can see it just calls the relevant driver method. One of these is
 in drivers/demo/demo-simple.c:

 static int simple_hello(struct udevice *dev, int ch)
 {
 	const struct dm_demo_pdata *pdata = dev_get_platdata(dev);

 	printf("Hello from %08x: %s %d\n", map_to_sysmem(dev),
 	       pdata->colour, pdata->sides);

 	return 0;
 }


 So that is a trip from top (command execution) to bottom (driver action)
 but it leaves a lot of topics to address.


 Declaring Drivers
 -----------------

 A driver declaration looks something like this (see
 drivers/demo/demo-shape.c):

 static const struct demo_ops shape_ops = {
 	.hello = shape_hello,
 	.status = shape_status,
 };

 U_BOOT_DRIVER(demo_shape_drv) = {
 	.name	= "demo_shape_drv",
 	.id	= UCLASS_DEMO,
 	.ops	= &shape_ops,
 	.priv_data_size = sizeof(struct shape_data),
 };


 This driver has two methods (hello and status) and requires a bit of
 private data (accessible through dev_get_priv(dev) once the driver has
 been probed). It is a member of UCLASS_DEMO so will register itself
 there.

 In U_BOOT_DRIVER it is also possible to specify special methods for bind
 and unbind, and these are called at appropriate times. For many drivers
 it is hoped that only 'probe' and 'remove' will be needed.

 The U_BOOT_DRIVER macro creates a data structure accessible from C,
 so driver model can find the drivers that are available.

 The methods a device can provide are documented in the device.h header.
 Briefly, they are:

     bind - make the driver model aware of a device (bind it to its driver)
     unbind - make the driver model forget the device
     ofdata_to_platdata - convert device tree data to platdata - see later
     probe - make a device ready for use
     remove - remove a device so it cannot be used until probed again

 The sequence to get a device to work is bind, ofdata_to_platdata (if using
 device tree) and probe.


 Platform Data
 -------------

 Where does the platform data come from? See demo-pdata.c which
 sets up a table of driver names and their associated platform data.
 The data can be interpreted by the drivers however they like - it is
 basically a communication scheme between the board-specific code and
 the generic drivers, which are intended to work on any board.

 Drivers can acceess their data via dev->info->platdata. Here is
 the declaration for the platform data, which would normally appear
 in the board file.

 	static const struct dm_demo_cdata red_square = {
 		.colour = "red",
 		.sides = 4.
 	};
 	static const struct driver_info info[] = {
 		{
 			.name = "demo_shape_drv",
 			.platdata = &red_square,
 		},
 	};

 	demo1 = driver_bind(root, &info[0]);


 Device Tree
 -----------

 While platdata is useful, a more flexible way of providing device data is
 by using device tree. With device tree we replace the above code with the
 following device tree fragment:

 	red-square {
 		compatible = "demo-shape";
 		colour = "red";
 		sides = <4>;
 	};


 The easiest way to make this work it to add a few members to the driver:

 	.platdata_auto_alloc_size = sizeof(struct dm_test_pdata),
 	.ofdata_to_platdata = testfdt_ofdata_to_platdata,
 	.probe	= testfdt_drv_probe,

 The 'auto_alloc' feature allowed space for the platdata to be allocated
 and zeroed before the driver's ofdata_to_platdata method is called. This
 method reads the information out of the device tree and puts it in
 dev->platdata. Then the probe method is called to set up the device.

 Note that both methods are optional. If you provide an ofdata_to_platdata
 method then it wlil be called first (after bind). If you provide a probe
 method it will be called next.

 If you don't want to have the platdata automatically allocated then you
 can leave out platdata_auto_alloc_size. In this case you can use malloc
 in your ofdata_to_platdata (or probe) method to allocate the required memory,
 and you should free it in the remove method.


 Declaring Uclasses
 ------------------

 The demo uclass is declared like this:

 U_BOOT_CLASS(demo) = {
 	.id		= UCLASS_DEMO,
 };

 It is also possible to specify special methods for probe, etc. The uclass
 numbering comes from include/dm/uclass.h. To add a new uclass, add to the
 end of the enum there, then declare your uclass as above.


 Data Structures
 ---------------

 Driver model uses a doubly-linked list as the basic data structure. Some
 nodes have several lists running through them. Creating a more efficient
 data structure might be worthwhile in some rare cases, once we understand
 what the bottlenecks are.


 Changes since v1
 ----------------

 For the record, this implementation uses a very similar approach to the
 original patches, but makes at least the following changes:

 - Tried to agressively remove boilerplate, so that for most drivers there
 is little or no 'driver model' code to write.
 - Moved some data from code into data structure - e.g. store a pointer to
 the driver operations structure in the driver, rather than passing it
 to the driver bind function.
 - Rename some structures to make them more similar to Linux (struct device
 instead of struct instance, struct platdata, etc.)
 - Change the name 'core' to 'uclass', meaning U-Boot class. It seems that
 this concept relates to a class of drivers (or a subsystem). We shouldn't
 use 'class' since it is a C++ reserved word, so U-Boot class (uclass) seems
 better than 'core'.
 - Remove 'struct driver_instance' and just use a single 'struct udevice'.
 This removes a level of indirection that doesn't seem necessary.
 - Built in device tree support, to avoid the need for platdata
 - Removed the concept of driver relocation, and just make it possible for
 the new driver (created after relocation) to access the old driver data.
 I feel that relocation is a very special case and will only apply to a few
 drivers, many of which can/will just re-init anyway. So the overhead of
 dealing with this might not be worth it.
 - Implemented a GPIO system, trying to keep it simple


 Things to punt for later
 ------------------------

 - SPL support - this will have to be present before many drivers can be
 converted, but it seems like we can add it once we are happy with the
 core implementation.
 - Pre-relocation support - similar story

 That is not to say that no thinking has gone into these - in fact there
 is quite a lot there. However, getting these right is non-trivial and
 there is a high cost associated with going down the wrong path.

 For SPL, it may be possible to fit in a simplified driver model with only
 bind and probe methods, to reduce size.

 For pre-relocation we can simply call the driver model init function. Then
 post relocation we throw that away and re-init driver model again. For drivers
 which require some sort of continuity between pre- and post-relocation
 devices, we can provide access to the pre-relocation device pointers.

 Uclasses are statically numbered at compile time. It would be possible to
 change this to dynamic numbering, but then we would require some sort of
 lookup service, perhaps searching by name. This is slightly less efficient
 so has been left out for now. One small advantage of dynamic numbering might
 be fewer merge conflicts in uclass-id.h.


 Simon Glass
 sjg@chromium.org
 April 2013
 Updated 7-May-13
 Updated 14-Jun-13
 Updated 18-Oct-13
 Updated 5-Nov-13
	Driver Model
	============

	This README contains high-level information about driver model, a unified
	way of declaring and accessing drivers in U-Boot. The original work was done
	by:

	Marek Vasut <marex@denx.de>
	Pavel Herrmann <morpheus.ibis@gmail.com>
	Viktor Křivák <viktor.krivak@gmail.com>
	Tomas Hlavacek <tmshlvck@gmail.com>

	This has been both simplified and extended into the current implementation
	by:

	Simon Glass <sjg@chromium.org>


	Terminology
	-----------

	Uclass - a group of devices which operate in the same way. A uclass provides
	a way of accessing invidual devices within the group, but always
	using the same interface. For example a GPIO uclass provides
	operations for get/set value. An I2C uclass may have 10 I2C ports,
	4 with one driver, and 6 with another.

	Driver - some code which talks to a peripheral and presents a higher-level
	interface to it.

	Device - an instance of a driver, tied to a particular port or peripheral.


	How to try it
	-------------

	Build U-Boot sandbox and run it:

	make sandbox_config
	make
	./u-boot

	(type 'reset' to exit U-Boot)


	There is a uclass called 'demo'. This uclass handles
	saying hello, and reporting its status. There are two drivers in this
	uclass:

	- simple: Just prints a message for hello, doesn't implement status
	- shape: Prints shapes and reports number of characters printed as status

	The demo class is pretty simple, but not trivial. The intention is that it
	can be used for testing, so it will implement all driver model features and
	provide good code coverage of them. It does have multiple drivers, it
	handles parameter data and platdata (data which tells the driver how
	to operate on a particular platform) and it uses private driver data.

	To try it, see the example session below:

	=>demo hello 1
	Hello '@' from 07981110: red 4
	=>demo status 2
	Status: 0
	=>demo hello 2
	g
	r@
	e@@
	e@@@
	n@@@@
	g@@@@@
	=>demo status 2
	Status: 21
	=>demo hello 4 ^
	y^^^
	e^^^^^
	l^^^^^^^
	l^^^^^^^
	o^^^^^
	w^^^
	=>demo status 4
	Status: 36
	=>


	Running the tests
	-----------------

	The intent with driver model is that the core portion has 100% test coverage
	in sandbox, and every uclass has its own test. As a move towards this, tests
	are provided in test/dm. To run them, try:

	./test/dm/test-dm.sh

	You should see something like this:

	<...U-Boot banner...>
	Running 12 driver model tests
	Test: dm_test_autobind
	Test: dm_test_autoprobe
	Test: dm_test_children
	Test: dm_test_fdt
	Test: dm_test_gpio
	sandbox_gpio: sb_gpio_get_value: error: offset 4 not reserved
	Test: dm_test_leak
	Warning: Please add '#define DEBUG' to the top of common/dlmalloc.c
	Warning: Please add '#define DEBUG' to the top of common/dlmalloc.c
	Test: dm_test_lifecycle
	Test: dm_test_operations
	Test: dm_test_ordering
	Test: dm_test_platdata
	Test: dm_test_remove
	Test: dm_test_uclass
	Failures: 0

	(You can add '#define DEBUG' as suggested to check for memory leaks)


	What is going on?
	-----------------

	Let's start at the top. The demo command is in common/cmd_demo.c. It does
	the usual command procesing and then:

	struct udevice *demo_dev;

	ret = uclass_get_device(UCLASS_DEMO, devnum, &demo_dev);

	UCLASS_DEMO means the class of devices which implement 'demo'. Other
	classes might be MMC, or GPIO, hashing or serial. The idea is that the
	devices in the class all share a particular way of working. The class
	presents a unified view of all these devices to U-Boot.

	This function looks up a device for the demo uclass. Given a device
	number we can find the device because all devices have registered with
	the UCLASS_DEMO uclass.

	The device is automatically activated ready for use by uclass_get_device().

	Now that we have the device we can do things like:

	return demo_hello(demo_dev, ch);

	This function is in the demo uclass. It takes care of calling the 'hello'
	method of the relevant driver. Bearing in mind that there are two drivers,
	this particular device may use one or other of them.

	The code for demo_hello() is in drivers/demo/demo-uclass.c:

	int demo_hello(struct udevice *dev, int ch)
	{
	const struct demo_ops *ops = device_get_ops(dev);

	if (!ops->hello)
	return -ENOSYS;

	return ops->hello(dev, ch);
	}

	As you can see it just calls the relevant driver method. One of these is
	in drivers/demo/demo-simple.c:

	static int simple_hello(struct udevice *dev, int ch)
	{
	const struct dm_demo_pdata *pdata = dev_get_platdata(dev);

	printf("Hello from %08x: %s %d\n", map_to_sysmem(dev),
	pdata->colour, pdata->sides);

	return 0;
	}


	So that is a trip from top (command execution) to bottom (driver action)
	but it leaves a lot of topics to address.


	Declaring Drivers
	-----------------

	A driver declaration looks something like this (see
	drivers/demo/demo-shape.c):

	static const struct demo_ops shape_ops = {
	.hello = shape_hello,
	.status = shape_status,
	};

	U_BOOT_DRIVER(demo_shape_drv) = {
	.name = "demo_shape_drv",
	.id = UCLASS_DEMO,
	.ops = &shape_ops,
	.priv_data_size = sizeof(struct shape_data),
	};


	This driver has two methods (hello and status) and requires a bit of
	private data (accessible through dev_get_priv(dev) once the driver has
	been probed). It is a member of UCLASS_DEMO so will register itself
	there.

	In U_BOOT_DRIVER it is also possible to specify special methods for bind
	and unbind, and these are called at appropriate times. For many drivers
	it is hoped that only 'probe' and 'remove' will be needed.

	The U_BOOT_DRIVER macro creates a data structure accessible from C,
	so driver model can find the drivers that are available.

	The methods a device can provide are documented in the device.h header.
	Briefly, they are:

	bind - make the driver model aware of a device (bind it to its driver)
	unbind - make the driver model forget the device
	ofdata_to_platdata - convert device tree data to platdata - see later
	probe - make a device ready for use
	remove - remove a device so it cannot be used until probed again

	The sequence to get a device to work is bind, ofdata_to_platdata (if using
	device tree) and probe.


	Platform Data
	-------------

	Where does the platform data come from? See demo-pdata.c which
	sets up a table of driver names and their associated platform data.
	The data can be interpreted by the drivers however they like - it is
	basically a communication scheme between the board-specific code and
	the generic drivers, which are intended to work on any board.

	Drivers can acceess their data via dev->info->platdata. Here is
	the declaration for the platform data, which would normally appear
	in the board file.

	static const struct dm_demo_cdata red_square = {
	.colour = "red",
	.sides = 4.
	};
	static const struct driver_info info[] = {
	{
	.name = "demo_shape_drv",
	.platdata = &red_square,
	},
	};

	demo1 = driver_bind(root, &info[0]);


	Device Tree
	-----------

	While platdata is useful, a more flexible way of providing device data is
	by using device tree. With device tree we replace the above code with the
	following device tree fragment:

	red-square {
	compatible = "demo-shape";
	colour = "red";
	sides = <4>;
	};


	The easiest way to make this work it to add a few members to the driver:

	.platdata_auto_alloc_size = sizeof(struct dm_test_pdata),
	.ofdata_to_platdata = testfdt_ofdata_to_platdata,
	.probe = testfdt_drv_probe,

	The 'auto_alloc' feature allowed space for the platdata to be allocated
	and zeroed before the driver's ofdata_to_platdata method is called. This
	method reads the information out of the device tree and puts it in
	dev->platdata. Then the probe method is called to set up the device.

	Note that both methods are optional. If you provide an ofdata_to_platdata
	method then it wlil be called first (after bind). If you provide a probe
	method it will be called next.

	If you don't want to have the platdata automatically allocated then you
	can leave out platdata_auto_alloc_size. In this case you can use malloc
	in your ofdata_to_platdata (or probe) method to allocate the required memory,
	and you should free it in the remove method.


	Declaring Uclasses
	------------------

	The demo uclass is declared like this:

	U_BOOT_CLASS(demo) = {
	.id = UCLASS_DEMO,
	};

	It is also possible to specify special methods for probe, etc. The uclass
	numbering comes from include/dm/uclass.h. To add a new uclass, add to the
	end of the enum there, then declare your uclass as above.


	Data Structures
	---------------

	Driver model uses a doubly-linked list as the basic data structure. Some
	nodes have several lists running through them. Creating a more efficient
	data structure might be worthwhile in some rare cases, once we understand
	what the bottlenecks are.


	Changes since v1
	----------------

	For the record, this implementation uses a very similar approach to the
	original patches, but makes at least the following changes:

	- Tried to agressively remove boilerplate, so that for most drivers there
	is little or no 'driver model' code to write.
	- Moved some data from code into data structure - e.g. store a pointer to
	the driver operations structure in the driver, rather than passing it
	to the driver bind function.
	- Rename some structures to make them more similar to Linux (struct device
	instead of struct instance, struct platdata, etc.)
	- Change the name 'core' to 'uclass', meaning U-Boot class. It seems that
	this concept relates to a class of drivers (or a subsystem). We shouldn't
	use 'class' since it is a C++ reserved word, so U-Boot class (uclass) seems
	better than 'core'.
	- Remove 'struct driver_instance' and just use a single 'struct udevice'.
	This removes a level of indirection that doesn't seem necessary.
	- Built in device tree support, to avoid the need for platdata
	- Removed the concept of driver relocation, and just make it possible for
	the new driver (created after relocation) to access the old driver data.
	I feel that relocation is a very special case and will only apply to a few
	drivers, many of which can/will just re-init anyway. So the overhead of
	dealing with this might not be worth it.
	- Implemented a GPIO system, trying to keep it simple


	Things to punt for later
	------------------------

	- SPL support - this will have to be present before many drivers can be
	converted, but it seems like we can add it once we are happy with the
	core implementation.
	- Pre-relocation support - similar story

	That is not to say that no thinking has gone into these - in fact there
	is quite a lot there. However, getting these right is non-trivial and
	there is a high cost associated with going down the wrong path.

	For SPL, it may be possible to fit in a simplified driver model with only
	bind and probe methods, to reduce size.

	For pre-relocation we can simply call the driver model init function. Then
	post relocation we throw that away and re-init driver model again. For drivers
	which require some sort of continuity between pre- and post-relocation
	devices, we can provide access to the pre-relocation device pointers.

	Uclasses are statically numbered at compile time. It would be possible to
	change this to dynamic numbering, but then we would require some sort of
	lookup service, perhaps searching by name. This is slightly less efficient
	so has been left out for now. One small advantage of dynamic numbering might
	be fewer merge conflicts in uclass-id.h.


	Simon Glass
	sjg@chromium.org
	April 2013
	Updated 7-May-13
	Updated 14-Jun-13
	Updated 18-Oct-13
	Updated 5-Nov-13