doc/board/ti/j721s2_evm.rst - filogic/uboot - Gitiles

 .. SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
 .. sectionauthor:: Manorit Chawdhry <m-chawdhry@ti.com>

 J721S2 and AM68 Platforms
 =========================

 Introduction:
 -------------

 The J721S2 family of SoCs are part of K3 Multicore SoC architecture platform
 targeting automotive applications. They are designed as a low power, high
 performance and highly integrated device architecture, adding significant
 enhancement on processing power, graphics capability, video and imaging
 processing, virtualization and coherent memory support.

 The AM68 Starter Kit/Evaluation Module (EVM) is based on the J721S2 family
 of SoCs. They are designed for machine vision, traffic monitoring, retail
 automation, and factory automation.

 The device is partitioned into three functional domains, each containing
 specific processing cores and peripherals:

 1. Wake-up (WKUP) domain:
     * ARM Cortex-M4F processor, runs TI Foundational Security (TIFS)

 2. Microcontroller (MCU) domain:
     * Dual core ARM Cortex-R5F processor, runs device management
       and SoC early boot

 3. MAIN domain:
     * Dual core 64-bit ARM Cortex-A72, runs HLOS

 More info can be found in TRM: https://www.ti.com/lit/pdf/spruj28

 Platform information:

 * https://www.ti.com/tool/J721S2XSOMXEVM
 * https://www.ti.com/tool/SK-AM68

 Boot Flow:
 ----------

 Below is the pictorial representation of boot flow:

 .. image:: img/boot_diagram_k3_current.svg

 - On this platform, "TI Foundational Security" (TIFS) functions as the
   security enclave master while "Device Manager" (DM), also known as the
   "TISCI server" in TI terminology, offers all the essential services.

 - As illustrated in the diagram above, R5 SPL manages power and clock
   services independently before handing over control to "DM". The A72 or
   the C7x (Aux core) software components request TIFS/DM to handle
   security or device management services.

 Sources:
 --------

 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_boot_sources
     :end-before: .. k3_rst_include_end_boot_sources

 Build procedure:
 ----------------

 0. Setup the environment variables:

 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_common_env_vars_desc
     :end-before: .. k3_rst_include_end_common_env_vars_desc

 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_board_env_vars_desc
     :end-before: .. k3_rst_include_end_board_env_vars_desc

 Set the variables corresponding to this platform:

 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_common_env_vars_defn
     :end-before: .. k3_rst_include_end_common_env_vars_defn
 .. code-block:: bash

  $ export UBOOT_CFG_CORTEXR=j721s2_evm_r5_defconfig
  $ export UBOOT_CFG_CORTEXA=j721s2_evm_a72_defconfig
  $ export TFA_BOARD=generic
  $ export TFA_EXTRA_ARGS="K3_USART=0x8"
  $ # The following is not a typo, j784s4 is the OP-TEE platform for j721s2
  $ export OPTEE_PLATFORM=k3-j784s4
  $ export OPTEE_EXTRA_ARGS="CFG_CONSOLE_UART=0x8"

 .. j721s2_evm_rst_include_start_build_steps

 1. Trusted Firmware-A:

 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_build_steps_tfa
     :end-before: .. k3_rst_include_end_build_steps_tfa


 2. OP-TEE:

 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_build_steps_optee
     :end-before: .. k3_rst_include_end_build_steps_optee

 3. U-Boot:

 .. _j721s2_evm_rst_u_boot_r5:

 * 3.1 R5:

 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_build_steps_spl_r5
     :end-before: .. k3_rst_include_end_build_steps_spl_r5

 .. _j721s2_evm_rst_u_boot_a72:

 * 3.2 A72:

 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_build_steps_uboot
     :end-before: .. k3_rst_include_end_build_steps_uboot
 .. j721s2_evm_rst_include_end_build_steps

 Target Images
 -------------

 In order to boot we need tiboot3.bin, tispl.bin and u-boot.img. Each SoC
 variant (GP, HS-FS, HS-SE) requires a different source for these files.

  - GP

     * tiboot3-j721s2-gp-evm.bin from :ref:`step 3.1 <j721s2_evm_rst_u_boot_r5>`
     * tispl.bin_unsigned, u-boot.img_unsigned from :ref:`step 3.2 <j721s2_evm_rst_u_boot_a72>`

  - HS-FS

     * tiboot3-j721s2-hs-fs-evm.bin from :ref:`step 3.1 <j721s2_evm_rst_u_boot_r5>`
     * tispl.bin, u-boot.img from :ref:`step 3.2 <j721s2_evm_rst_u_boot_a72>`

  - HS-SE

     * tiboot3-j721s2-hs-evm.bin from :ref:`step 3.1 <j721s2_evm_rst_u_boot_r5>`
     * tispl.bin, u-boot.img from :ref:`step 3.2 <j721s2_evm_rst_u_boot_a72>`

 Image formats:
 --------------

 - tiboot3.bin

 .. image:: img/multi_cert_tiboot3.bin.svg

 - tispl.bin

 .. image:: img/dm_tispl.bin.svg

 R5 Memory Map:
 --------------

 .. list-table::
    :widths: 16 16 16
    :header-rows: 1

    * - Region
      - Start Address
      - End Address

    * - SPL
      - 0x41c00000
      - 0x41c40000

    * - EMPTY
      - 0x41c40000
      - 0x41c61f20

    * - STACK
      - 0x41c65f20
      - 0x41c61f20

    * - Global data
      - 0x41c65f20
      - 0x41c66000

    * - Heap
      - 0x41c66000
      - 0x41c76000

    * - BSS
      - 0x41c76000
      - 0x41c80000

    * - DM DATA
      - 0x41c80000
      - 0x41c84130

    * - EMPTY
      - 0x41c84130
      - 0x41cff9fc

    * - MCU Scratchpad
      - 0x41cff9fc
      - 0x41cffbfc

    * - ROM DATA
      - 0x41cffbfc
      - 0x41cfffff

 Switch Setting for Boot Mode
 ----------------------------

 Boot Mode pins provide means to select the boot mode and options before the
 device is powered up. After every POR, they are the main source to populate
 the Boot Parameter Tables.

 Boot Mode Pins for J721S2-EVM
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 The following table shows some common boot modes used on J721S2 platform.
 More details can be found in the Technical Reference Manual:
 https://www.ti.com/lit/pdf/spruj28 under the `Boot Mode Pins` section.

 .. list-table:: Boot Modes
    :widths: 16 16 16
    :header-rows: 1

    * - Switch Label
      - SW9: 12345678
      - SW8: 12345678

    * - SD
      - 00000000
      - 10000010

    * - EMMC
      - 01000000
      - 10000000

    * - OSPI
      - 01000000
      - 00000110

    * - UART
      - 01110000
      - 00000000

    * - USB DFU
      - 00100000
      - 10000000

 For SW8 and SW9, the switch state in the "ON" position = 1.

 Boot Mode Pins for SK-AM68
 ^^^^^^^^^^^^^^^^^^^^^^^^^^

 The following table shows some common boot modes used on AM68-SK platform.
 More details can be found in the User Guide for AM68-SK:
 https://www.ti.com/lit/pdf/spruj68 under the `Bootmode Settings` section.

 .. list-table:: Boot Modes
    :widths: 16 16
    :header-rows: 1

    * - Switch Label
      - SW1: 1234

    * - SD
      - 0000

    * - xSPI
      - 0010

    * - UART
      - 1010

    * - Ethernet
      - 0100

 For SW1, the switch state in the "ON" position = 1.

 Debugging U-Boot
 ----------------

 See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for
 detailed setup information.

 .. warning::

   **OpenOCD support since**: v0.12.0

   If the default package version of OpenOCD in your development
   environment's distribution needs to be updated, it might be necessary to
   build OpenOCD from the source.

 Debugging U-Boot on J721S2-EVM
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_openocd_connect_XDS110
     :end-before: .. k3_rst_include_end_openocd_connect_XDS110

 To start OpenOCD and connect to the board

 .. code-block:: bash

   openocd -f board/ti_j721s2evm.cfg

 Debugging U-Boot on SK-AM68
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^

 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_openocd_connect_cti20
     :end-before: .. k3_rst_include_end_openocd_connect_cti20

 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_openocd_cfg_external_intro
     :end-before: .. k3_rst_include_end_openocd_cfg_external_intro

 For SK-AM68, the openocd_connect.cfg is as follows:

 .. code-block:: tcl

   # TUMPA example:
   # http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User's_Manual
   source [find interface/ftdi/tumpa.cfg]

   transport select jtag

   # default JTAG configuration has only SRST and no TRST
   reset_config srst_only srst_push_pull

   # delay after SRST goes inactive
   adapter srst delay 20

   if { ![info exists SOC] } {
     # Set the SoC of interest
     set SOC j721s2
   }

   source [find target/ti_k3.cfg]

   ftdi tdo_sample_edge falling

   # Speeds for FT2232H are in multiples of 2, and 32MHz is tops
   # max speed we seem to achieve is ~20MHz.. so we pick 16MHz
   adapter speed 16000
	.. SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
	.. sectionauthor:: Manorit Chawdhry <m-chawdhry@ti.com>

	J721S2 and AM68 Platforms
	=========================

	Introduction:
	-------------

	The J721S2 family of SoCs are part of K3 Multicore SoC architecture platform
	targeting automotive applications. They are designed as a low power, high
	performance and highly integrated device architecture, adding significant
	enhancement on processing power, graphics capability, video and imaging
	processing, virtualization and coherent memory support.

	The AM68 Starter Kit/Evaluation Module (EVM) is based on the J721S2 family
	of SoCs. They are designed for machine vision, traffic monitoring, retail
	automation, and factory automation.

	The device is partitioned into three functional domains, each containing
	specific processing cores and peripherals:

	1. Wake-up (WKUP) domain:
	* ARM Cortex-M4F processor, runs TI Foundational Security (TIFS)

	2. Microcontroller (MCU) domain:
	* Dual core ARM Cortex-R5F processor, runs device management
	and SoC early boot

	3. MAIN domain:
	* Dual core 64-bit ARM Cortex-A72, runs HLOS

	More info can be found in TRM: https://www.ti.com/lit/pdf/spruj28

	Platform information:

	* https://www.ti.com/tool/J721S2XSOMXEVM
	* https://www.ti.com/tool/SK-AM68

	Boot Flow:
	----------

	Below is the pictorial representation of boot flow:

	.. image:: img/boot_diagram_k3_current.svg

	- On this platform, "TI Foundational Security" (TIFS) functions as the
	security enclave master while "Device Manager" (DM), also known as the
	"TISCI server" in TI terminology, offers all the essential services.

	- As illustrated in the diagram above, R5 SPL manages power and clock
	services independently before handing over control to "DM". The A72 or
	the C7x (Aux core) software components request TIFS/DM to handle
	security or device management services.

	Sources:
	--------

	.. include:: k3.rst
	:start-after: .. k3_rst_include_start_boot_sources
	:end-before: .. k3_rst_include_end_boot_sources

	Build procedure:
	----------------

	0. Setup the environment variables:

	.. include:: k3.rst
	:start-after: .. k3_rst_include_start_common_env_vars_desc
	:end-before: .. k3_rst_include_end_common_env_vars_desc

	.. include:: k3.rst
	:start-after: .. k3_rst_include_start_board_env_vars_desc
	:end-before: .. k3_rst_include_end_board_env_vars_desc

	Set the variables corresponding to this platform:

	.. include:: k3.rst
	:start-after: .. k3_rst_include_start_common_env_vars_defn
	:end-before: .. k3_rst_include_end_common_env_vars_defn
	.. code-block:: bash

	$ export UBOOT_CFG_CORTEXR=j721s2_evm_r5_defconfig
	$ export UBOOT_CFG_CORTEXA=j721s2_evm_a72_defconfig
	$ export TFA_BOARD=generic
	$ export TFA_EXTRA_ARGS="K3_USART=0x8"
	$ # The following is not a typo, j784s4 is the OP-TEE platform for j721s2
	$ export OPTEE_PLATFORM=k3-j784s4
	$ export OPTEE_EXTRA_ARGS="CFG_CONSOLE_UART=0x8"

	.. j721s2_evm_rst_include_start_build_steps

	1. Trusted Firmware-A:

	.. include:: k3.rst
	:start-after: .. k3_rst_include_start_build_steps_tfa
	:end-before: .. k3_rst_include_end_build_steps_tfa


	2. OP-TEE:

	.. include:: k3.rst
	:start-after: .. k3_rst_include_start_build_steps_optee
	:end-before: .. k3_rst_include_end_build_steps_optee

	3. U-Boot:

	.. _j721s2_evm_rst_u_boot_r5:

	* 3.1 R5:

	.. include:: k3.rst
	:start-after: .. k3_rst_include_start_build_steps_spl_r5
	:end-before: .. k3_rst_include_end_build_steps_spl_r5

	.. _j721s2_evm_rst_u_boot_a72:

	* 3.2 A72:

	.. include:: k3.rst
	:start-after: .. k3_rst_include_start_build_steps_uboot
	:end-before: .. k3_rst_include_end_build_steps_uboot
	.. j721s2_evm_rst_include_end_build_steps

	Target Images
	-------------

	In order to boot we need tiboot3.bin, tispl.bin and u-boot.img. Each SoC
	variant (GP, HS-FS, HS-SE) requires a different source for these files.

	- GP

	* tiboot3-j721s2-gp-evm.bin from :ref:`step 3.1 <j721s2_evm_rst_u_boot_r5>`
	* tispl.bin_unsigned, u-boot.img_unsigned from :ref:`step 3.2 <j721s2_evm_rst_u_boot_a72>`

	- HS-FS

	* tiboot3-j721s2-hs-fs-evm.bin from :ref:`step 3.1 <j721s2_evm_rst_u_boot_r5>`
	* tispl.bin, u-boot.img from :ref:`step 3.2 <j721s2_evm_rst_u_boot_a72>`

	- HS-SE

	* tiboot3-j721s2-hs-evm.bin from :ref:`step 3.1 <j721s2_evm_rst_u_boot_r5>`
	* tispl.bin, u-boot.img from :ref:`step 3.2 <j721s2_evm_rst_u_boot_a72>`

	Image formats:
	--------------

	- tiboot3.bin

	.. image:: img/multi_cert_tiboot3.bin.svg

	- tispl.bin

	.. image:: img/dm_tispl.bin.svg

	R5 Memory Map:
	--------------

	.. list-table::
	:widths: 16 16 16
	:header-rows: 1

	* - Region
	- Start Address
	- End Address

	* - SPL
	- 0x41c00000
	- 0x41c40000

	* - EMPTY
	- 0x41c40000
	- 0x41c61f20

	* - STACK
	- 0x41c65f20
	- 0x41c61f20

	* - Global data
	- 0x41c65f20
	- 0x41c66000

	* - Heap
	- 0x41c66000
	- 0x41c76000

	* - BSS
	- 0x41c76000
	- 0x41c80000

	* - DM DATA
	- 0x41c80000
	- 0x41c84130

	* - EMPTY
	- 0x41c84130
	- 0x41cff9fc

	* - MCU Scratchpad
	- 0x41cff9fc
	- 0x41cffbfc

	* - ROM DATA
	- 0x41cffbfc
	- 0x41cfffff

	Switch Setting for Boot Mode
	----------------------------

	Boot Mode pins provide means to select the boot mode and options before the
	device is powered up. After every POR, they are the main source to populate
	the Boot Parameter Tables.

	Boot Mode Pins for J721S2-EVM
	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

	The following table shows some common boot modes used on J721S2 platform.
	More details can be found in the Technical Reference Manual:
	https://www.ti.com/lit/pdf/spruj28 under the `Boot Mode Pins` section.

	.. list-table:: Boot Modes
	:widths: 16 16 16
	:header-rows: 1

	* - Switch Label
	- SW9: 12345678
	- SW8: 12345678

	* - SD
	- 00000000
	- 10000010

	* - EMMC
	- 01000000
	- 10000000

	* - OSPI
	- 01000000
	- 00000110

	* - UART
	- 01110000
	- 00000000

	* - USB DFU
	- 00100000
	- 10000000

	For SW8 and SW9, the switch state in the "ON" position = 1.

	Boot Mode Pins for SK-AM68
	^^^^^^^^^^^^^^^^^^^^^^^^^^

	The following table shows some common boot modes used on AM68-SK platform.
	More details can be found in the User Guide for AM68-SK:
	https://www.ti.com/lit/pdf/spruj68 under the `Bootmode Settings` section.

	.. list-table:: Boot Modes
	:widths: 16 16
	:header-rows: 1

	* - Switch Label
	- SW1: 1234

	* - SD
	- 0000

	* - xSPI
	- 0010

	* - UART
	- 1010

	* - Ethernet
	- 0100

	For SW1, the switch state in the "ON" position = 1.

	Debugging U-Boot
	----------------

	See :ref:`Common Debugging environment - OpenOCD<k3_rst_refer_openocd>`: for
	detailed setup information.

	.. warning::

	OpenOCD support since: v0.12.0

	If the default package version of OpenOCD in your development
	environment's distribution needs to be updated, it might be necessary to
	build OpenOCD from the source.

	Debugging U-Boot on J721S2-EVM
	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

	.. include:: k3.rst
	:start-after: .. k3_rst_include_start_openocd_connect_XDS110
	:end-before: .. k3_rst_include_end_openocd_connect_XDS110

	To start OpenOCD and connect to the board

	.. code-block:: bash

	openocd -f board/ti_j721s2evm.cfg

	Debugging U-Boot on SK-AM68
	^^^^^^^^^^^^^^^^^^^^^^^^^^^

	.. include:: k3.rst
	:start-after: .. k3_rst_include_start_openocd_connect_cti20
	:end-before: .. k3_rst_include_end_openocd_connect_cti20

	.. include:: k3.rst
	:start-after: .. k3_rst_include_start_openocd_cfg_external_intro
	:end-before: .. k3_rst_include_end_openocd_cfg_external_intro

	For SK-AM68, the openocd_connect.cfg is as follows:

	.. code-block:: tcl

	# TUMPA example:
	# http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User's_Manual
	source [find interface/ftdi/tumpa.cfg]

	transport select jtag

	# default JTAG configuration has only SRST and no TRST
	reset_config srst_only srst_push_pull

	# delay after SRST goes inactive
	adapter srst delay 20

	if { ![info exists SOC] } {
	# Set the SoC of interest
	set SOC j721s2
	}

	source [find target/ti_k3.cfg]

	ftdi tdo_sample_edge falling

	# Speeds for FT2232H are in multiples of 2, and 32MHz is tops
	# max speed we seem to achieve is ~20MHz.. so we pick 16MHz
	adapter speed 16000