| config AHCI |
| bool "Support SATA controllers with driver model" |
| depends on DM |
| help |
| This enables a uclass for disk controllers in U-Boot. Various driver |
| types can use this, such as AHCI/SATA. It does not provide any standard |
| operations at present. The block device interface has not been converted |
| to driver model. |
| |
| config SATA |
| bool "Support SATA controllers" |
| select HAVE_BLOCK_DEVICE |
| help |
| This enables support for SATA (Serial Advanced Technology |
| Attachment), a serial bus standard for connecting to hard drives and |
| other storage devices. |
| |
| SATA replaces PATA (originally just ATA), which stands for Parallel AT |
| Attachment, where AT refers to an IBM AT (Advanced Technology) |
| computer released in 1984. |
| |
| See also CMD_SATA which provides command-line support. |
| |
| config LIBATA |
| bool |
| help |
| Select this to build and link the libata helper functions. |
| |
| config SCSI_AHCI |
| bool "Enable SCSI interface to SATA devices" |
| select LIBATA |
| help |
| Enable this to allow interfacing SATA devices via the SCSI layer. |
| |
| menu "SATA/SCSI device support" |
| |
| config AHCI_PCI |
| bool "Support for PCI-based AHCI controller" |
| depends on DM_SCSI |
| help |
| Enables support for the PCI-based AHCI controller. |
| |
| config SATA_CEVA |
| bool "Ceva Sata controller" |
| depends on AHCI |
| depends on DM_SCSI |
| help |
| This option enables Ceva Sata controller hard IP available on Xilinx |
| ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and |
| AHCI 1.3 specifications with hot-plug detect feature. |
| |
| |
| config DWC_AHCI |
| bool "Enable Synopsys DWC AHCI driver support" |
| select SCSI_AHCI |
| select PHY |
| depends on DM_SCSI |
| help |
| Enable this driver to support Sata devices through |
| Synopsys DWC AHCI module. |
| |
| config DWC_AHSATA |
| bool "Enable DWC AHSATA driver support" |
| select LIBATA |
| help |
| Enable this driver to support the DWC AHSATA SATA controller found |
| in i.MX5 and i.MX6 SoCs. |
| |
| config FSL_SATA |
| bool "Enable Freescale SATA controller driver support" |
| select LIBATA |
| help |
| Enable this driver to support the SATA controller found in |
| some Freescale PowerPC SoCs. |
| |
| config MVSATA_IDE |
| bool "Enable Marvell SATA controller driver support via IDE interface" |
| help |
| Enable this driver to support the SATA controller found in |
| some Marvell SoCs, running in IDE compatibility mode using PIO. |
| |
| config SATA_MV |
| bool "Enable Marvell SATA controller driver support" |
| select LIBATA |
| help |
| Enable this driver to support the SATA controller found in |
| some Marvell SoCs. |
| |
| config SATA_SIL |
| bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support" |
| select LIBATA |
| help |
| Enable this driver to support the SIL3131, SIL3132 and SIL3124 |
| SATA controllers. |
| |
| config SATA_SIL3114 |
| bool "Enable Silicon Image SIL3114 SATA driver support" |
| select LIBATA |
| help |
| Enable this driver to support the SIL3114 SATA controllers. |
| |
| config AHCI_MVEBU |
| bool "Marvell EBU AHCI SATA support" |
| depends on ARCH_MVEBU |
| depends on AHCI |
| select SCSI_AHCI |
| help |
| This option enables support for the Marvell EBU SoC's |
| onboard AHCI SATA. |
| |
| If unsure, say N. |
| endmenu |