| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| /* |
| * (C) Copyright 2015 Google, Inc |
| * Copyright 2014 Rockchip Inc. |
| * |
| * Adapted from coreboot. |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <dt-structs.h> |
| #include <errno.h> |
| #include <hang.h> |
| #include <init.h> |
| #include <log.h> |
| #include <ram.h> |
| #include <regmap.h> |
| #include <syscon.h> |
| #include <asm/arch-rockchip/clock.h> |
| #include <asm/arch-rockchip/cru.h> |
| #include <asm/arch-rockchip/ddr_rk3288.h> |
| #include <asm/arch-rockchip/grf_rk3288.h> |
| #include <asm/arch-rockchip/hardware.h> |
| #include <asm/arch-rockchip/pmu_rk3288.h> |
| #include <asm/arch-rockchip/sdram.h> |
| #include <asm/arch-rockchip/sdram_rk3288.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <power/regulator.h> |
| #include <power/rk8xx_pmic.h> |
| |
| struct chan_info { |
| struct rk3288_ddr_pctl *pctl; |
| struct rk3288_ddr_publ *publ; |
| struct rk3288_msch *msch; |
| }; |
| |
| struct dram_info { |
| struct chan_info chan[2]; |
| struct ram_info info; |
| struct clk ddr_clk; |
| struct rockchip_cru *cru; |
| struct rk3288_grf *grf; |
| struct rk3288_sgrf *sgrf; |
| struct rk3288_pmu *pmu; |
| bool is_veyron; |
| }; |
| |
| struct rk3288_sdram_params { |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| struct dtd_rockchip_rk3288_dmc of_plat; |
| #endif |
| struct rk3288_sdram_channel ch[2]; |
| struct rk3288_sdram_pctl_timing pctl_timing; |
| struct rk3288_sdram_phy_timing phy_timing; |
| struct rk3288_base_params base; |
| int num_channels; |
| struct regmap *map; |
| }; |
| |
| const int ddrconf_table[] = { |
| /* row col,bw */ |
| 0, |
| ((1 << DDRCONF_ROW_SHIFT) | 1 << DDRCONF_COL_SHIFT), |
| ((2 << DDRCONF_ROW_SHIFT) | 1 << DDRCONF_COL_SHIFT), |
| ((3 << DDRCONF_ROW_SHIFT) | 1 << DDRCONF_COL_SHIFT), |
| ((4 << DDRCONF_ROW_SHIFT) | 1 << DDRCONF_COL_SHIFT), |
| ((1 << DDRCONF_ROW_SHIFT) | 2 << DDRCONF_COL_SHIFT), |
| ((2 << DDRCONF_ROW_SHIFT) | 2 << DDRCONF_COL_SHIFT), |
| ((3 << DDRCONF_ROW_SHIFT) | 2 << DDRCONF_COL_SHIFT), |
| ((1 << DDRCONF_ROW_SHIFT) | 0 << DDRCONF_COL_SHIFT), |
| ((2 << DDRCONF_ROW_SHIFT) | 0 << DDRCONF_COL_SHIFT), |
| ((3 << DDRCONF_ROW_SHIFT) | 0 << DDRCONF_COL_SHIFT), |
| 0, |
| 0, |
| 0, |
| 0, |
| ((4 << 4) | 2), |
| }; |
| |
| #define TEST_PATTEN 0x5aa5f00f |
| #define DQS_GATE_TRAINING_ERROR_RANK0 (1 << 4) |
| #define DQS_GATE_TRAINING_ERROR_RANK1 (2 << 4) |
| |
| #if defined(CONFIG_TPL_BUILD) || \ |
| (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) |
| static void copy_to_reg(u32 *dest, const u32 *src, u32 n) |
| { |
| int i; |
| |
| for (i = 0; i < n / sizeof(u32); i++) { |
| writel(*src, dest); |
| src++; |
| dest++; |
| } |
| } |
| |
| static void ddr_reset(struct rockchip_cru *cru, u32 ch, u32 ctl, u32 phy) |
| { |
| u32 phy_ctl_srstn_shift = 4 + 5 * ch; |
| u32 ctl_psrstn_shift = 3 + 5 * ch; |
| u32 ctl_srstn_shift = 2 + 5 * ch; |
| u32 phy_psrstn_shift = 1 + 5 * ch; |
| u32 phy_srstn_shift = 5 * ch; |
| |
| rk_clrsetreg(&cru->cru_softrst_con[10], |
| 1 << phy_ctl_srstn_shift | 1 << ctl_psrstn_shift | |
| 1 << ctl_srstn_shift | 1 << phy_psrstn_shift | |
| 1 << phy_srstn_shift, |
| phy << phy_ctl_srstn_shift | ctl << ctl_psrstn_shift | |
| ctl << ctl_srstn_shift | phy << phy_psrstn_shift | |
| phy << phy_srstn_shift); |
| } |
| |
| static void ddr_phy_ctl_reset(struct rockchip_cru *cru, u32 ch, u32 n) |
| { |
| u32 phy_ctl_srstn_shift = 4 + 5 * ch; |
| |
| rk_clrsetreg(&cru->cru_softrst_con[10], |
| 1 << phy_ctl_srstn_shift, n << phy_ctl_srstn_shift); |
| } |
| |
| static void phy_pctrl_reset(struct rockchip_cru *cru, |
| struct rk3288_ddr_publ *publ, |
| int channel) |
| { |
| int i; |
| |
| ddr_reset(cru, channel, 1, 1); |
| udelay(1); |
| clrbits_le32(&publ->acdllcr, ACDLLCR_DLLSRST); |
| for (i = 0; i < 4; i++) |
| clrbits_le32(&publ->datx8[i].dxdllcr, DXDLLCR_DLLSRST); |
| |
| udelay(10); |
| setbits_le32(&publ->acdllcr, ACDLLCR_DLLSRST); |
| for (i = 0; i < 4; i++) |
| setbits_le32(&publ->datx8[i].dxdllcr, DXDLLCR_DLLSRST); |
| |
| udelay(10); |
| ddr_reset(cru, channel, 1, 0); |
| udelay(10); |
| ddr_reset(cru, channel, 0, 0); |
| udelay(10); |
| } |
| |
| static void phy_dll_bypass_set(struct rk3288_ddr_publ *publ, |
| u32 freq) |
| { |
| int i; |
| |
| if (freq <= 250000000) { |
| if (freq <= 150000000) |
| clrbits_le32(&publ->dllgcr, SBIAS_BYPASS); |
| else |
| setbits_le32(&publ->dllgcr, SBIAS_BYPASS); |
| setbits_le32(&publ->acdllcr, ACDLLCR_DLLDIS); |
| for (i = 0; i < 4; i++) |
| setbits_le32(&publ->datx8[i].dxdllcr, |
| DXDLLCR_DLLDIS); |
| |
| setbits_le32(&publ->pir, PIR_DLLBYP); |
| } else { |
| clrbits_le32(&publ->dllgcr, SBIAS_BYPASS); |
| clrbits_le32(&publ->acdllcr, ACDLLCR_DLLDIS); |
| for (i = 0; i < 4; i++) { |
| clrbits_le32(&publ->datx8[i].dxdllcr, |
| DXDLLCR_DLLDIS); |
| } |
| |
| clrbits_le32(&publ->pir, PIR_DLLBYP); |
| } |
| } |
| |
| static void dfi_cfg(struct rk3288_ddr_pctl *pctl, u32 dramtype) |
| { |
| writel(DFI_INIT_START, &pctl->dfistcfg0); |
| writel(DFI_DRAM_CLK_SR_EN | DFI_DRAM_CLK_DPD_EN, |
| &pctl->dfistcfg1); |
| writel(DFI_PARITY_INTR_EN | DFI_PARITY_EN, &pctl->dfistcfg2); |
| writel(7 << TLP_RESP_TIME_SHIFT | LP_SR_EN | LP_PD_EN, |
| &pctl->dfilpcfg0); |
| |
| writel(2 << TCTRL_DELAY_TIME_SHIFT, &pctl->dfitctrldelay); |
| writel(1 << TPHY_WRDATA_TIME_SHIFT, &pctl->dfitphywrdata); |
| writel(0xf << TPHY_RDLAT_TIME_SHIFT, &pctl->dfitphyrdlat); |
| writel(2 << TDRAM_CLK_DIS_TIME_SHIFT, &pctl->dfitdramclkdis); |
| writel(2 << TDRAM_CLK_EN_TIME_SHIFT, &pctl->dfitdramclken); |
| writel(1, &pctl->dfitphyupdtype0); |
| |
| /* cs0 and cs1 write odt enable */ |
| writel((RANK0_ODT_WRITE_SEL | RANK1_ODT_WRITE_SEL), |
| &pctl->dfiodtcfg); |
| /* odt write length */ |
| writel(7 << ODT_LEN_BL8_W_SHIFT, &pctl->dfiodtcfg1); |
| /* phyupd and ctrlupd disabled */ |
| writel(0, &pctl->dfiupdcfg); |
| } |
| |
| static void ddr_set_enable(struct rk3288_grf *grf, uint channel, bool enable) |
| { |
| uint val = 0; |
| |
| if (enable) { |
| val = 1 << (channel ? DDR1_16BIT_EN_SHIFT : |
| DDR0_16BIT_EN_SHIFT); |
| } |
| rk_clrsetreg(&grf->soc_con0, |
| 1 << (channel ? DDR1_16BIT_EN_SHIFT : DDR0_16BIT_EN_SHIFT), |
| val); |
| } |
| |
| static void ddr_set_ddr3_mode(struct rk3288_grf *grf, uint channel, |
| bool ddr3_mode) |
| { |
| uint mask, val; |
| |
| mask = 1 << (channel ? MSCH1_MAINDDR3_SHIFT : MSCH0_MAINDDR3_SHIFT); |
| val = ddr3_mode << (channel ? MSCH1_MAINDDR3_SHIFT : |
| MSCH0_MAINDDR3_SHIFT); |
| rk_clrsetreg(&grf->soc_con0, mask, val); |
| } |
| |
| static void ddr_set_en_bst_odt(struct rk3288_grf *grf, uint channel, |
| bool enable, bool enable_bst, bool enable_odt) |
| { |
| uint mask; |
| bool disable_bst = !enable_bst; |
| |
| mask = channel ? |
| (1 << LPDDR3_EN1_SHIFT | 1 << UPCTL1_BST_DIABLE_SHIFT | |
| 1 << UPCTL1_LPDDR3_ODT_EN_SHIFT) : |
| (1 << LPDDR3_EN0_SHIFT | 1 << UPCTL0_BST_DIABLE_SHIFT | |
| 1 << UPCTL0_LPDDR3_ODT_EN_SHIFT); |
| rk_clrsetreg(&grf->soc_con2, mask, |
| enable << (channel ? LPDDR3_EN1_SHIFT : LPDDR3_EN0_SHIFT) | |
| disable_bst << (channel ? UPCTL1_BST_DIABLE_SHIFT : |
| UPCTL0_BST_DIABLE_SHIFT) | |
| enable_odt << (channel ? UPCTL1_LPDDR3_ODT_EN_SHIFT : |
| UPCTL0_LPDDR3_ODT_EN_SHIFT)); |
| } |
| |
| static void pctl_cfg(int channel, struct rk3288_ddr_pctl *pctl, |
| struct rk3288_sdram_params *sdram_params, |
| struct rk3288_grf *grf) |
| { |
| unsigned int burstlen; |
| |
| burstlen = (sdram_params->base.noc_timing >> 18) & 0x7; |
| copy_to_reg(&pctl->togcnt1u, &sdram_params->pctl_timing.togcnt1u, |
| sizeof(sdram_params->pctl_timing)); |
| switch (sdram_params->base.dramtype) { |
| case LPDDR3: |
| writel(sdram_params->pctl_timing.tcl - 1, |
| &pctl->dfitrddataen); |
| writel(sdram_params->pctl_timing.tcwl, |
| &pctl->dfitphywrlat); |
| burstlen >>= 1; |
| writel(LPDDR2_S4 | 0 << MDDR_LPDDR2_CLK_STOP_IDLE_SHIFT | |
| LPDDR2_EN | burstlen << BURSTLENGTH_SHIFT | |
| (6 - 4) << TFAW_SHIFT | PD_EXIT_FAST | |
| 1 << PD_TYPE_SHIFT | 0 << PD_IDLE_SHIFT, |
| &pctl->mcfg); |
| ddr_set_ddr3_mode(grf, channel, false); |
| ddr_set_enable(grf, channel, true); |
| ddr_set_en_bst_odt(grf, channel, true, false, |
| sdram_params->base.odt); |
| break; |
| case DDR3: |
| if (sdram_params->phy_timing.mr[1] & DDR3_DLL_DISABLE) { |
| writel(sdram_params->pctl_timing.tcl - 3, |
| &pctl->dfitrddataen); |
| } else { |
| writel(sdram_params->pctl_timing.tcl - 2, |
| &pctl->dfitrddataen); |
| } |
| writel(sdram_params->pctl_timing.tcwl - 1, |
| &pctl->dfitphywrlat); |
| writel(0 << MDDR_LPDDR2_CLK_STOP_IDLE_SHIFT | DDR3_EN | |
| DDR2_DDR3_BL_8 | (6 - 4) << TFAW_SHIFT | PD_EXIT_SLOW | |
| 1 << PD_TYPE_SHIFT | 0 << PD_IDLE_SHIFT, |
| &pctl->mcfg); |
| ddr_set_ddr3_mode(grf, channel, true); |
| ddr_set_enable(grf, channel, true); |
| |
| ddr_set_en_bst_odt(grf, channel, false, true, false); |
| break; |
| } |
| |
| setbits_le32(&pctl->scfg, 1); |
| } |
| |
| static void phy_cfg(const struct chan_info *chan, int channel, |
| struct rk3288_sdram_params *sdram_params) |
| { |
| struct rk3288_ddr_publ *publ = chan->publ; |
| struct rk3288_msch *msch = chan->msch; |
| uint ddr_freq_mhz = sdram_params->base.ddr_freq / 1000000; |
| u32 dinit2, tmp; |
| int i; |
| |
| dinit2 = DIV_ROUND_UP(ddr_freq_mhz * 200000, 1000); |
| /* DDR PHY Timing */ |
| copy_to_reg(&publ->dtpr[0], &sdram_params->phy_timing.dtpr0, |
| sizeof(sdram_params->phy_timing)); |
| writel(sdram_params->base.noc_timing, &msch->ddrtiming); |
| writel(0x3f, &msch->readlatency); |
| writel(sdram_params->base.noc_activate, &msch->activate); |
| writel(2 << BUSWRTORD_SHIFT | 2 << BUSRDTOWR_SHIFT | |
| 1 << BUSRDTORD_SHIFT, &msch->devtodev); |
| writel(DIV_ROUND_UP(ddr_freq_mhz * 5120, 1000) << PRT_DLLLOCK_SHIFT | |
| DIV_ROUND_UP(ddr_freq_mhz * 50, 1000) << PRT_DLLSRST_SHIFT | |
| 8 << PRT_ITMSRST_SHIFT, &publ->ptr[0]); |
| writel(DIV_ROUND_UP(ddr_freq_mhz * 500000, 1000) << PRT_DINIT0_SHIFT | |
| DIV_ROUND_UP(ddr_freq_mhz * 400, 1000) << PRT_DINIT1_SHIFT, |
| &publ->ptr[1]); |
| writel(min(dinit2, 0x1ffffU) << PRT_DINIT2_SHIFT | |
| DIV_ROUND_UP(ddr_freq_mhz * 1000, 1000) << PRT_DINIT3_SHIFT, |
| &publ->ptr[2]); |
| |
| switch (sdram_params->base.dramtype) { |
| case LPDDR3: |
| clrsetbits_le32(&publ->pgcr, 0x1F, |
| 0 << PGCR_DFTLMT_SHIFT | |
| 0 << PGCR_DFTCMP_SHIFT | |
| 1 << PGCR_DQSCFG_SHIFT | |
| 0 << PGCR_ITMDMD_SHIFT); |
| /* DDRMODE select LPDDR3 */ |
| clrsetbits_le32(&publ->dcr, DDRMD_MASK << DDRMD_SHIFT, |
| DDRMD_LPDDR2_LPDDR3 << DDRMD_SHIFT); |
| clrsetbits_le32(&publ->dxccr, |
| DQSNRES_MASK << DQSNRES_SHIFT | |
| DQSRES_MASK << DQSRES_SHIFT, |
| 4 << DQSRES_SHIFT | 0xc << DQSNRES_SHIFT); |
| tmp = readl(&publ->dtpr[1]); |
| tmp = ((tmp >> TDQSCKMAX_SHIFT) & TDQSCKMAX_MASK) - |
| ((tmp >> TDQSCK_SHIFT) & TDQSCK_MASK); |
| clrsetbits_le32(&publ->dsgcr, |
| DQSGE_MASK << DQSGE_SHIFT | |
| DQSGX_MASK << DQSGX_SHIFT, |
| tmp << DQSGE_SHIFT | tmp << DQSGX_SHIFT); |
| break; |
| case DDR3: |
| clrbits_le32(&publ->pgcr, 0x1f); |
| clrsetbits_le32(&publ->dcr, DDRMD_MASK << DDRMD_SHIFT, |
| DDRMD_DDR3 << DDRMD_SHIFT); |
| break; |
| } |
| if (sdram_params->base.odt) { |
| /*dynamic RTT enable */ |
| for (i = 0; i < 4; i++) |
| setbits_le32(&publ->datx8[i].dxgcr, DQSRTT | DQRTT); |
| } else { |
| /*dynamic RTT disable */ |
| for (i = 0; i < 4; i++) |
| clrbits_le32(&publ->datx8[i].dxgcr, DQSRTT | DQRTT); |
| } |
| } |
| |
| static void phy_init(struct rk3288_ddr_publ *publ) |
| { |
| setbits_le32(&publ->pir, PIR_INIT | PIR_DLLSRST |
| | PIR_DLLLOCK | PIR_ZCAL | PIR_ITMSRST | PIR_CLRSR); |
| udelay(1); |
| while ((readl(&publ->pgsr) & |
| (PGSR_IDONE | PGSR_DLDONE | PGSR_ZCDONE)) != |
| (PGSR_IDONE | PGSR_DLDONE | PGSR_ZCDONE)) |
| ; |
| } |
| |
| static void send_command(struct rk3288_ddr_pctl *pctl, u32 rank, |
| u32 cmd, u32 arg) |
| { |
| writel((START_CMD | (rank << 20) | arg | cmd), &pctl->mcmd); |
| udelay(1); |
| while (readl(&pctl->mcmd) & START_CMD) |
| ; |
| } |
| |
| static inline void send_command_op(struct rk3288_ddr_pctl *pctl, |
| u32 rank, u32 cmd, u32 ma, u32 op) |
| { |
| send_command(pctl, rank, cmd, (ma & LPDDR2_MA_MASK) << LPDDR2_MA_SHIFT | |
| (op & LPDDR2_OP_MASK) << LPDDR2_OP_SHIFT); |
| } |
| |
| static void memory_init(struct rk3288_ddr_publ *publ, |
| u32 dramtype) |
| { |
| setbits_le32(&publ->pir, |
| (PIR_INIT | PIR_DRAMINIT | PIR_LOCKBYP |
| | PIR_ZCALBYP | PIR_CLRSR | PIR_ICPC |
| | (dramtype == DDR3 ? PIR_DRAMRST : 0))); |
| udelay(1); |
| while ((readl(&publ->pgsr) & (PGSR_IDONE | PGSR_DLDONE)) |
| != (PGSR_IDONE | PGSR_DLDONE)) |
| ; |
| } |
| |
| static void move_to_config_state(struct rk3288_ddr_publ *publ, |
| struct rk3288_ddr_pctl *pctl) |
| { |
| unsigned int state; |
| |
| while (1) { |
| state = readl(&pctl->stat) & PCTL_STAT_MSK; |
| |
| switch (state) { |
| case LOW_POWER: |
| writel(WAKEUP_STATE, &pctl->sctl); |
| while ((readl(&pctl->stat) & PCTL_STAT_MSK) |
| != ACCESS) |
| ; |
| /* wait DLL lock */ |
| while ((readl(&publ->pgsr) & PGSR_DLDONE) |
| != PGSR_DLDONE) |
| ; |
| /* |
| * if at low power state,need wakeup first, |
| * and then enter the config |
| * so here no break. |
| */ |
| case ACCESS: |
| /* no break */ |
| case INIT_MEM: |
| writel(CFG_STATE, &pctl->sctl); |
| while ((readl(&pctl->stat) & PCTL_STAT_MSK) != CONFIG) |
| ; |
| break; |
| case CONFIG: |
| return; |
| default: |
| break; |
| } |
| } |
| } |
| |
| static void set_bandwidth_ratio(const struct chan_info *chan, int channel, |
| u32 n, struct rk3288_grf *grf) |
| { |
| struct rk3288_ddr_pctl *pctl = chan->pctl; |
| struct rk3288_ddr_publ *publ = chan->publ; |
| struct rk3288_msch *msch = chan->msch; |
| |
| if (n == 1) { |
| setbits_le32(&pctl->ppcfg, 1); |
| rk_setreg(&grf->soc_con0, 1 << (8 + channel)); |
| setbits_le32(&msch->ddrtiming, 1 << 31); |
| /* Data Byte disable*/ |
| clrbits_le32(&publ->datx8[2].dxgcr, 1); |
| clrbits_le32(&publ->datx8[3].dxgcr, 1); |
| /* disable DLL */ |
| setbits_le32(&publ->datx8[2].dxdllcr, DXDLLCR_DLLDIS); |
| setbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLDIS); |
| } else { |
| clrbits_le32(&pctl->ppcfg, 1); |
| rk_clrreg(&grf->soc_con0, 1 << (8 + channel)); |
| clrbits_le32(&msch->ddrtiming, 1 << 31); |
| /* Data Byte enable*/ |
| setbits_le32(&publ->datx8[2].dxgcr, 1); |
| setbits_le32(&publ->datx8[3].dxgcr, 1); |
| |
| /* enable DLL */ |
| clrbits_le32(&publ->datx8[2].dxdllcr, DXDLLCR_DLLDIS); |
| clrbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLDIS); |
| /* reset DLL */ |
| clrbits_le32(&publ->datx8[2].dxdllcr, DXDLLCR_DLLSRST); |
| clrbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLSRST); |
| udelay(10); |
| setbits_le32(&publ->datx8[2].dxdllcr, DXDLLCR_DLLSRST); |
| setbits_le32(&publ->datx8[3].dxdllcr, DXDLLCR_DLLSRST); |
| } |
| setbits_le32(&pctl->dfistcfg0, 1 << 2); |
| } |
| |
| static int data_training(const struct chan_info *chan, int channel, |
| struct rk3288_sdram_params *sdram_params) |
| { |
| unsigned int j; |
| int ret = 0; |
| u32 rank; |
| int i; |
| u32 step[2] = { PIR_QSTRN, PIR_RVTRN }; |
| struct rk3288_ddr_publ *publ = chan->publ; |
| struct rk3288_ddr_pctl *pctl = chan->pctl; |
| |
| /* disable auto refresh */ |
| writel(0, &pctl->trefi); |
| |
| if (sdram_params->base.dramtype != LPDDR3) |
| setbits_le32(&publ->pgcr, 1 << PGCR_DQSCFG_SHIFT); |
| rank = sdram_params->ch[channel].rank | 1; |
| for (j = 0; j < ARRAY_SIZE(step); j++) { |
| /* |
| * trigger QSTRN and RVTRN |
| * clear DTDONE status |
| */ |
| setbits_le32(&publ->pir, PIR_CLRSR); |
| |
| /* trigger DTT */ |
| setbits_le32(&publ->pir, |
| PIR_INIT | step[j] | PIR_LOCKBYP | PIR_ZCALBYP | |
| PIR_CLRSR); |
| udelay(1); |
| /* wait echo byte DTDONE */ |
| while ((readl(&publ->datx8[0].dxgsr[0]) & rank) |
| != rank) |
| ; |
| while ((readl(&publ->datx8[1].dxgsr[0]) & rank) |
| != rank) |
| ; |
| if (!(readl(&pctl->ppcfg) & 1)) { |
| while ((readl(&publ->datx8[2].dxgsr[0]) |
| & rank) != rank) |
| ; |
| while ((readl(&publ->datx8[3].dxgsr[0]) |
| & rank) != rank) |
| ; |
| } |
| if (readl(&publ->pgsr) & |
| (PGSR_DTERR | PGSR_RVERR | PGSR_RVEIRR)) { |
| ret = -1; |
| break; |
| } |
| } |
| /* send some auto refresh to complement the lost while DTT */ |
| for (i = 0; i < (rank > 1 ? 8 : 4); i++) |
| send_command(pctl, rank, REF_CMD, 0); |
| |
| if (sdram_params->base.dramtype != LPDDR3) |
| clrbits_le32(&publ->pgcr, 1 << PGCR_DQSCFG_SHIFT); |
| |
| /* resume auto refresh */ |
| writel(sdram_params->pctl_timing.trefi, &pctl->trefi); |
| |
| return ret; |
| } |
| |
| static void move_to_access_state(const struct chan_info *chan) |
| { |
| struct rk3288_ddr_publ *publ = chan->publ; |
| struct rk3288_ddr_pctl *pctl = chan->pctl; |
| unsigned int state; |
| |
| while (1) { |
| state = readl(&pctl->stat) & PCTL_STAT_MSK; |
| |
| switch (state) { |
| case LOW_POWER: |
| if (((readl(&pctl->stat) >> LP_TRIG_SHIFT) & |
| LP_TRIG_MASK) == 1) |
| return; |
| |
| writel(WAKEUP_STATE, &pctl->sctl); |
| while ((readl(&pctl->stat) & PCTL_STAT_MSK) != ACCESS) |
| ; |
| /* wait DLL lock */ |
| while ((readl(&publ->pgsr) & PGSR_DLDONE) |
| != PGSR_DLDONE) |
| ; |
| break; |
| case INIT_MEM: |
| writel(CFG_STATE, &pctl->sctl); |
| while ((readl(&pctl->stat) & PCTL_STAT_MSK) != CONFIG) |
| ; |
| case CONFIG: |
| writel(GO_STATE, &pctl->sctl); |
| while ((readl(&pctl->stat) & PCTL_STAT_MSK) == CONFIG) |
| ; |
| break; |
| case ACCESS: |
| return; |
| default: |
| break; |
| } |
| } |
| } |
| |
| static void dram_cfg_rbc(const struct chan_info *chan, u32 chnum, |
| struct rk3288_sdram_params *sdram_params) |
| { |
| struct rk3288_ddr_publ *publ = chan->publ; |
| |
| if (sdram_params->ch[chnum].bk == 3) |
| clrsetbits_le32(&publ->dcr, PDQ_MASK << PDQ_SHIFT, |
| 1 << PDQ_SHIFT); |
| else |
| clrbits_le32(&publ->dcr, PDQ_MASK << PDQ_SHIFT); |
| |
| writel(sdram_params->base.ddrconfig, &chan->msch->ddrconf); |
| } |
| |
| static void dram_all_config(const struct dram_info *dram, |
| struct rk3288_sdram_params *sdram_params) |
| { |
| unsigned int chan; |
| u32 sys_reg = 0; |
| |
| sys_reg |= sdram_params->base.dramtype << SYS_REG_DDRTYPE_SHIFT; |
| sys_reg |= (sdram_params->num_channels - 1) << SYS_REG_NUM_CH_SHIFT; |
| for (chan = 0; chan < sdram_params->num_channels; chan++) { |
| const struct rk3288_sdram_channel *info = |
| &sdram_params->ch[chan]; |
| |
| sys_reg |= info->row_3_4 << SYS_REG_ROW_3_4_SHIFT(chan); |
| sys_reg |= 1 << SYS_REG_CHINFO_SHIFT(chan); |
| sys_reg |= (info->rank - 1) << SYS_REG_RANK_SHIFT(chan); |
| sys_reg |= (info->col - 9) << SYS_REG_COL_SHIFT(chan); |
| sys_reg |= info->bk == 3 ? 0 : 1 << SYS_REG_BK_SHIFT(chan); |
| sys_reg |= (info->cs0_row - 13) << SYS_REG_CS0_ROW_SHIFT(chan); |
| sys_reg |= (info->cs1_row - 13) << SYS_REG_CS1_ROW_SHIFT(chan); |
| sys_reg |= (2 >> info->bw) << SYS_REG_BW_SHIFT(chan); |
| sys_reg |= (2 >> info->dbw) << SYS_REG_DBW_SHIFT(chan); |
| |
| dram_cfg_rbc(&dram->chan[chan], chan, sdram_params); |
| } |
| writel(sys_reg, &dram->pmu->sys_reg[2]); |
| rk_clrsetreg(&dram->sgrf->soc_con2, 0x1f, sdram_params->base.stride); |
| } |
| |
| static int sdram_rank_bw_detect(struct dram_info *dram, int channel, |
| struct rk3288_sdram_params *sdram_params) |
| { |
| int reg; |
| int need_trainig = 0; |
| const struct chan_info *chan = &dram->chan[channel]; |
| struct rk3288_ddr_publ *publ = chan->publ; |
| |
| if (data_training(chan, channel, sdram_params) < 0) { |
| reg = readl(&publ->datx8[0].dxgsr[0]); |
| /* Check the result for rank 0 */ |
| if ((channel == 0) && (reg & DQS_GATE_TRAINING_ERROR_RANK0)) { |
| debug("data training fail!\n"); |
| return -EIO; |
| } else if ((channel == 1) && |
| (reg & DQS_GATE_TRAINING_ERROR_RANK0)) { |
| sdram_params->num_channels = 1; |
| } |
| |
| /* Check the result for rank 1 */ |
| if (reg & DQS_GATE_TRAINING_ERROR_RANK1) { |
| sdram_params->ch[channel].rank = 1; |
| clrsetbits_le32(&publ->pgcr, 0xF << 18, |
| sdram_params->ch[channel].rank << 18); |
| need_trainig = 1; |
| } |
| reg = readl(&publ->datx8[2].dxgsr[0]); |
| if (reg & (1 << 4)) { |
| sdram_params->ch[channel].bw = 1; |
| set_bandwidth_ratio(chan, channel, |
| sdram_params->ch[channel].bw, |
| dram->grf); |
| need_trainig = 1; |
| } |
| } |
| /* Assume the Die bit width are the same with the chip bit width */ |
| sdram_params->ch[channel].dbw = sdram_params->ch[channel].bw; |
| |
| if (need_trainig && |
| (data_training(chan, channel, sdram_params) < 0)) { |
| if (sdram_params->base.dramtype == LPDDR3) { |
| ddr_phy_ctl_reset(dram->cru, channel, 1); |
| udelay(10); |
| ddr_phy_ctl_reset(dram->cru, channel, 0); |
| udelay(10); |
| } |
| debug("2nd data training failed!"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int sdram_col_row_detect(struct dram_info *dram, int channel, |
| struct rk3288_sdram_params *sdram_params) |
| { |
| int row, col; |
| unsigned int addr; |
| const struct chan_info *chan = &dram->chan[channel]; |
| struct rk3288_ddr_pctl *pctl = chan->pctl; |
| struct rk3288_ddr_publ *publ = chan->publ; |
| int ret = 0; |
| |
| /* Detect col */ |
| for (col = 11; col >= 9; col--) { |
| writel(0, CFG_SYS_SDRAM_BASE); |
| addr = CFG_SYS_SDRAM_BASE + |
| (1 << (col + sdram_params->ch[channel].bw - 1)); |
| writel(TEST_PATTEN, addr); |
| if ((readl(addr) == TEST_PATTEN) && |
| (readl(CFG_SYS_SDRAM_BASE) == 0)) |
| break; |
| } |
| if (col == 8) { |
| printf("Col detect error\n"); |
| ret = -EINVAL; |
| goto out; |
| } else { |
| sdram_params->ch[channel].col = col; |
| } |
| |
| move_to_config_state(publ, pctl); |
| writel(4, &chan->msch->ddrconf); |
| move_to_access_state(chan); |
| /* Detect row*/ |
| for (row = 16; row >= 12; row--) { |
| writel(0, CFG_SYS_SDRAM_BASE); |
| addr = CFG_SYS_SDRAM_BASE + (1 << (row + 15 - 1)); |
| writel(TEST_PATTEN, addr); |
| if ((readl(addr) == TEST_PATTEN) && |
| (readl(CFG_SYS_SDRAM_BASE) == 0)) |
| break; |
| } |
| if (row == 11) { |
| printf("Row detect error\n"); |
| ret = -EINVAL; |
| } else { |
| sdram_params->ch[channel].cs1_row = row; |
| sdram_params->ch[channel].row_3_4 = 0; |
| debug("chn %d col %d, row %d\n", channel, col, row); |
| sdram_params->ch[channel].cs0_row = row; |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static int sdram_get_niu_config(struct rk3288_sdram_params *sdram_params) |
| { |
| int i, tmp, size, ret = 0; |
| |
| tmp = sdram_params->ch[0].col - 9; |
| tmp -= (sdram_params->ch[0].bw == 2) ? 0 : 1; |
| tmp |= ((sdram_params->ch[0].cs0_row - 12) << 4); |
| size = sizeof(ddrconf_table)/sizeof(ddrconf_table[0]); |
| for (i = 0; i < size; i++) |
| if (tmp == ddrconf_table[i]) |
| break; |
| if (i >= size) { |
| printf("niu config not found\n"); |
| ret = -EINVAL; |
| } else { |
| sdram_params->base.ddrconfig = i; |
| } |
| |
| return ret; |
| } |
| |
| static int sdram_get_stride(struct rk3288_sdram_params *sdram_params) |
| { |
| int stride = -1; |
| int ret = 0; |
| long cap = sdram_params->num_channels * (1u << |
| (sdram_params->ch[0].cs0_row + |
| sdram_params->ch[0].col + |
| (sdram_params->ch[0].rank - 1) + |
| sdram_params->ch[0].bw + |
| 3 - 20)); |
| |
| switch (cap) { |
| case 512: |
| stride = 0; |
| break; |
| case 1024: |
| stride = 5; |
| break; |
| case 2048: |
| stride = 9; |
| break; |
| case 4096: |
| stride = 0xd; |
| break; |
| default: |
| stride = -1; |
| printf("could not find correct stride, cap error!\n"); |
| ret = -EINVAL; |
| break; |
| } |
| sdram_params->base.stride = stride; |
| |
| return ret; |
| } |
| |
| static int sdram_init(struct dram_info *dram, |
| struct rk3288_sdram_params *sdram_params) |
| { |
| int channel; |
| int zqcr; |
| int ret; |
| |
| debug("%s start\n", __func__); |
| if ((sdram_params->base.dramtype == DDR3 && |
| sdram_params->base.ddr_freq > 800000000) || |
| (sdram_params->base.dramtype == LPDDR3 && |
| sdram_params->base.ddr_freq > 533000000)) { |
| debug("SDRAM frequency is too high!"); |
| return -E2BIG; |
| } |
| |
| debug("ddr clk dpll\n"); |
| ret = clk_set_rate(&dram->ddr_clk, sdram_params->base.ddr_freq); |
| debug("ret=%d\n", ret); |
| if (ret) { |
| debug("Could not set DDR clock\n"); |
| return ret; |
| } |
| |
| for (channel = 0; channel < 2; channel++) { |
| const struct chan_info *chan = &dram->chan[channel]; |
| struct rk3288_ddr_pctl *pctl = chan->pctl; |
| struct rk3288_ddr_publ *publ = chan->publ; |
| |
| /* map all the 4GB space to the current channel */ |
| if (channel) |
| rk_clrsetreg(&dram->sgrf->soc_con2, 0x1f, 0x17); |
| else |
| rk_clrsetreg(&dram->sgrf->soc_con2, 0x1f, 0x1a); |
| phy_pctrl_reset(dram->cru, publ, channel); |
| phy_dll_bypass_set(publ, sdram_params->base.ddr_freq); |
| |
| dfi_cfg(pctl, sdram_params->base.dramtype); |
| |
| pctl_cfg(channel, pctl, sdram_params, dram->grf); |
| |
| phy_cfg(chan, channel, sdram_params); |
| |
| phy_init(publ); |
| |
| writel(POWER_UP_START, &pctl->powctl); |
| while (!(readl(&pctl->powstat) & POWER_UP_DONE)) |
| ; |
| |
| memory_init(publ, sdram_params->base.dramtype); |
| move_to_config_state(publ, pctl); |
| |
| if (sdram_params->base.dramtype == LPDDR3) { |
| send_command(pctl, 3, DESELECT_CMD, 0); |
| udelay(1); |
| send_command(pctl, 3, PREA_CMD, 0); |
| udelay(1); |
| send_command_op(pctl, 3, MRS_CMD, 63, 0xfc); |
| udelay(1); |
| send_command_op(pctl, 3, MRS_CMD, 1, |
| sdram_params->phy_timing.mr[1]); |
| udelay(1); |
| send_command_op(pctl, 3, MRS_CMD, 2, |
| sdram_params->phy_timing.mr[2]); |
| udelay(1); |
| send_command_op(pctl, 3, MRS_CMD, 3, |
| sdram_params->phy_timing.mr[3]); |
| udelay(1); |
| } |
| |
| /* Using 32bit bus width for detect */ |
| sdram_params->ch[channel].bw = 2; |
| set_bandwidth_ratio(chan, channel, |
| sdram_params->ch[channel].bw, dram->grf); |
| /* |
| * set cs, using n=3 for detect |
| * CS0, n=1 |
| * CS1, n=2 |
| * CS0 & CS1, n = 3 |
| */ |
| sdram_params->ch[channel].rank = 2; |
| clrsetbits_le32(&publ->pgcr, 0xF << 18, |
| (sdram_params->ch[channel].rank | 1) << 18); |
| |
| /* DS=40ohm,ODT=155ohm */ |
| zqcr = 1 << ZDEN_SHIFT | 2 << PU_ONDIE_SHIFT | |
| 2 << PD_ONDIE_SHIFT | 0x19 << PU_OUTPUT_SHIFT | |
| 0x19 << PD_OUTPUT_SHIFT; |
| writel(zqcr, &publ->zq1cr[0]); |
| writel(zqcr, &publ->zq0cr[0]); |
| |
| if (sdram_params->base.dramtype == LPDDR3) { |
| /* LPDDR2/LPDDR3 need to wait DAI complete, max 10us */ |
| udelay(10); |
| send_command_op(pctl, |
| sdram_params->ch[channel].rank | 1, |
| MRS_CMD, 11, |
| sdram_params->base.odt ? 3 : 0); |
| if (channel == 0) { |
| writel(0, &pctl->mrrcfg0); |
| send_command_op(pctl, 1, MRR_CMD, 8, 0); |
| /* S8 */ |
| if ((readl(&pctl->mrrstat0) & 0x3) != 3) { |
| debug("failed!"); |
| return -EREMOTEIO; |
| } |
| } |
| } |
| |
| /* Detect the rank and bit-width with data-training */ |
| sdram_rank_bw_detect(dram, channel, sdram_params); |
| |
| if (sdram_params->base.dramtype == LPDDR3) { |
| u32 i; |
| writel(0, &pctl->mrrcfg0); |
| for (i = 0; i < 17; i++) |
| send_command_op(pctl, 1, MRR_CMD, i, 0); |
| } |
| writel(15, &chan->msch->ddrconf); |
| move_to_access_state(chan); |
| /* DDR3 and LPDDR3 are always 8 bank, no need detect */ |
| sdram_params->ch[channel].bk = 3; |
| /* Detect Col and Row number*/ |
| ret = sdram_col_row_detect(dram, channel, sdram_params); |
| if (ret) |
| goto error; |
| } |
| /* Find NIU DDR configuration */ |
| ret = sdram_get_niu_config(sdram_params); |
| if (ret) |
| goto error; |
| /* Find stride setting */ |
| ret = sdram_get_stride(sdram_params); |
| if (ret) |
| goto error; |
| |
| dram_all_config(dram, sdram_params); |
| debug("%s done\n", __func__); |
| |
| return 0; |
| error: |
| printf("DRAM init failed!\n"); |
| hang(); |
| } |
| |
| # ifdef CONFIG_ROCKCHIP_FAST_SPL |
| static int veyron_init(struct dram_info *priv) |
| { |
| struct udevice *pmic; |
| int ret; |
| |
| ret = uclass_first_device_err(UCLASS_PMIC, &pmic); |
| if (ret) |
| return ret; |
| |
| /* Slowly raise to max CPU voltage to prevent overshoot */ |
| ret = rk8xx_spl_configure_buck(pmic, 1, 1200000); |
| if (ret) |
| return ret; |
| udelay(175);/* Must wait for voltage to stabilize, 2mV/us */ |
| ret = rk8xx_spl_configure_buck(pmic, 1, 1400000); |
| if (ret) |
| return ret; |
| udelay(100);/* Must wait for voltage to stabilize, 2mV/us */ |
| |
| rk3288_clk_configure_cpu(priv->cru, priv->grf); |
| |
| return 0; |
| } |
| # endif |
| |
| static int setup_sdram(struct udevice *dev) |
| { |
| struct dram_info *priv = dev_get_priv(dev); |
| struct rk3288_sdram_params *params = dev_get_plat(dev); |
| |
| # ifdef CONFIG_ROCKCHIP_FAST_SPL |
| if (priv->is_veyron) { |
| int ret; |
| |
| ret = veyron_init(priv); |
| if (ret) |
| return ret; |
| } |
| # endif |
| |
| return sdram_init(priv, params); |
| } |
| |
| static int rk3288_dmc_of_to_plat(struct udevice *dev) |
| { |
| struct rk3288_sdram_params *params = dev_get_plat(dev); |
| int ret; |
| |
| if (!CONFIG_IS_ENABLED(OF_REAL)) |
| return 0; |
| |
| /* Rk3288 supports dual-channel, set default channel num to 2 */ |
| params->num_channels = 2; |
| ret = dev_read_u32_array(dev, "rockchip,pctl-timing", |
| (u32 *)¶ms->pctl_timing, |
| sizeof(params->pctl_timing) / sizeof(u32)); |
| if (ret) { |
| debug("%s: Cannot read rockchip,pctl-timing\n", __func__); |
| return -EINVAL; |
| } |
| ret = dev_read_u32_array(dev, "rockchip,phy-timing", |
| (u32 *)¶ms->phy_timing, |
| sizeof(params->phy_timing) / sizeof(u32)); |
| if (ret) { |
| debug("%s: Cannot read rockchip,phy-timing\n", __func__); |
| return -EINVAL; |
| } |
| ret = dev_read_u32_array(dev, "rockchip,sdram-params", |
| (u32 *)¶ms->base, |
| sizeof(params->base) / sizeof(u32)); |
| if (ret) { |
| debug("%s: Cannot read rockchip,sdram-params\n", __func__); |
| return -EINVAL; |
| } |
| #ifdef CONFIG_ROCKCHIP_FAST_SPL |
| struct dram_info *priv = dev_get_priv(dev); |
| |
| priv->is_veyron = !fdt_node_check_compatible(blob, 0, "google,veyron"); |
| #endif |
| ret = regmap_init_mem(dev_ofnode(dev), ¶ms->map); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| #endif /* CONFIG_SPL_BUILD */ |
| |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| static int conv_of_plat(struct udevice *dev) |
| { |
| struct rk3288_sdram_params *plat = dev_get_plat(dev); |
| struct dtd_rockchip_rk3288_dmc *of_plat = &plat->of_plat; |
| int ret; |
| |
| memcpy(&plat->pctl_timing, of_plat->rockchip_pctl_timing, |
| sizeof(plat->pctl_timing)); |
| memcpy(&plat->phy_timing, of_plat->rockchip_phy_timing, |
| sizeof(plat->phy_timing)); |
| memcpy(&plat->base, of_plat->rockchip_sdram_params, sizeof(plat->base)); |
| /* Rk3288 supports dual-channel, set default channel num to 2 */ |
| plat->num_channels = 2; |
| ret = regmap_init_mem_plat(dev, of_plat->reg, sizeof(of_plat->reg[0]), |
| ARRAY_SIZE(of_plat->reg) / 2, &plat->map); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| #endif |
| |
| static int rk3288_dmc_probe(struct udevice *dev) |
| { |
| #if defined(CONFIG_TPL_BUILD) || \ |
| (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) |
| struct rk3288_sdram_params *plat = dev_get_plat(dev); |
| struct udevice *dev_clk; |
| struct regmap *map; |
| int ret; |
| #endif |
| struct dram_info *priv = dev_get_priv(dev); |
| |
| priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU); |
| #if defined(CONFIG_TPL_BUILD) || \ |
| (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) |
| #if CONFIG_IS_ENABLED(OF_PLATDATA) |
| ret = conv_of_plat(dev); |
| if (ret) |
| return ret; |
| #endif |
| map = syscon_get_regmap_by_driver_data(ROCKCHIP_SYSCON_NOC); |
| if (IS_ERR(map)) |
| return PTR_ERR(map); |
| priv->chan[0].msch = regmap_get_range(map, 0); |
| priv->chan[1].msch = (struct rk3288_msch *) |
| (regmap_get_range(map, 0) + 0x80); |
| |
| priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); |
| priv->sgrf = syscon_get_first_range(ROCKCHIP_SYSCON_SGRF); |
| |
| priv->chan[0].pctl = regmap_get_range(plat->map, 0); |
| priv->chan[0].publ = regmap_get_range(plat->map, 1); |
| priv->chan[1].pctl = regmap_get_range(plat->map, 2); |
| priv->chan[1].publ = regmap_get_range(plat->map, 3); |
| |
| ret = rockchip_get_clk(&dev_clk); |
| if (ret) |
| return ret; |
| priv->ddr_clk.id = CLK_DDR; |
| ret = clk_request(dev_clk, &priv->ddr_clk); |
| if (ret) |
| return ret; |
| |
| priv->cru = rockchip_get_cru(); |
| if (IS_ERR(priv->cru)) |
| return PTR_ERR(priv->cru); |
| ret = setup_sdram(dev); |
| if (ret) |
| return ret; |
| #else |
| priv->info.base = CFG_SYS_SDRAM_BASE; |
| priv->info.size = rockchip_sdram_size( |
| (phys_addr_t)&priv->pmu->sys_reg[2]); |
| #endif |
| |
| return 0; |
| } |
| |
| static int rk3288_dmc_get_info(struct udevice *dev, struct ram_info *info) |
| { |
| struct dram_info *priv = dev_get_priv(dev); |
| |
| *info = priv->info; |
| |
| return 0; |
| } |
| |
| static struct ram_ops rk3288_dmc_ops = { |
| .get_info = rk3288_dmc_get_info, |
| }; |
| |
| static const struct udevice_id rk3288_dmc_ids[] = { |
| { .compatible = "rockchip,rk3288-dmc" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(rockchip_rk3288_dmc) = { |
| .name = "rockchip_rk3288_dmc", |
| .id = UCLASS_RAM, |
| .of_match = rk3288_dmc_ids, |
| .ops = &rk3288_dmc_ops, |
| #if defined(CONFIG_TPL_BUILD) || \ |
| (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) |
| .of_to_plat = rk3288_dmc_of_to_plat, |
| #endif |
| .probe = rk3288_dmc_probe, |
| .priv_auto = sizeof(struct dram_info), |
| #if defined(CONFIG_TPL_BUILD) || \ |
| (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) |
| .plat_auto = sizeof(struct rk3288_sdram_params), |
| #endif |
| }; |