blob: 0ed6beca387acc71b16d94b0f01f06b5908edb76 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2010 eXMeritus, A Boeing Company
*/
#ifndef POWERPC_ASM_MPC85XX_GPIO_H_
#define POWERPC_ASM_MPC85XX_GPIO_H_
#ifndef CONFIG_DM_GPIO
# include <asm/immap_85xx.h>
/*
* The following internal functions are an MPC85XX-specific GPIO API which
* allows setting and querying multiple GPIOs in a single operation.
*
* All of these look relatively large, but the arguments are almost always
* constants, so they compile down to just a few instructions and a
* memory-mapped IO operation or two.
*/
static inline void mpc85xx_gpio_set(unsigned int mask,
unsigned int dir, unsigned int val)
{
ccsr_gpio_t *gpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
/* First mask off the unwanted parts of "dir" and "val" */
dir &= mask;
val &= mask;
/* Now read in the values we're supposed to preserve */
dir |= (in_be32(&gpio->gpdir) & ~mask);
val |= (in_be32(&gpio->gpdat) & ~mask);
/*
* Poke the new output values first, then set the direction. This
* helps to avoid transient data when switching from input to output
* and vice versa.
*/
out_be32(&gpio->gpdat, val);
out_be32(&gpio->gpdir, dir);
}
static inline void mpc85xx_gpio_set_in(unsigned int gpios)
{
mpc85xx_gpio_set(gpios, 0x00000000, 0x00000000);
}
static inline void mpc85xx_gpio_set_low(unsigned int gpios)
{
mpc85xx_gpio_set(gpios, 0xFFFFFFFF, 0x00000000);
}
static inline void mpc85xx_gpio_set_high(unsigned int gpios)
{
mpc85xx_gpio_set(gpios, 0xFFFFFFFF, 0xFFFFFFFF);
}
static inline unsigned int mpc85xx_gpio_get(unsigned int mask)
{
ccsr_gpio_t *gpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR);
/* Read the requested values */
return in_be32(&gpio->gpdat) & mask;
}
/*
* These implement the generic Linux GPIO API on top of the other functions
* in this header.
*/
static inline int gpio_request(unsigned gpio, const char *label)
{
/* Compatibility shim */
return 0;
}
static inline int gpio_free(unsigned gpio)
{
/* Compatibility shim */
return 0;
}
static inline int gpio_direction_input(unsigned gpio)
{
mpc85xx_gpio_set_in(1U << gpio);
return 0;
}
static inline int gpio_direction_output(unsigned gpio, int value)
{
if (value)
mpc85xx_gpio_set_high(1U << gpio);
else
mpc85xx_gpio_set_low(1U << gpio);
return 0;
}
static inline int gpio_get_value(unsigned gpio)
{
return !!mpc85xx_gpio_get(1U << gpio);
}
static inline int gpio_set_value(unsigned gpio, int value)
{
if (value)
mpc85xx_gpio_set_high(1U << gpio);
else
mpc85xx_gpio_set_low(1U << gpio);
return 0;
}
static inline int gpio_is_valid(int gpio)
{
return (gpio >= 0) && (gpio < 32);
}
#endif /* not CONFIG_DM_GPIO */
#endif /* not POWERPC_ASM_MPC85XX_GPIO_H_ */